Trabajos private equity en WolverhamptonCrear alertas

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title:Stress EngineerReporting To:Manager, EngineeringWork Schedule:Hybrid – Wolverhampton, GBRMoog Military Aircraft Group are recruiting for a Degree Qualified Stress Engineer to join our Commercial Actuation team at our Wolverhampton facility.The ideal candidate for the role should be able to demonstrate at least five years’ experience in aerospace stress analysis of gearboxes, geared rotary actuators, power drive units, hydraulic manifolds and transmission shafts for high lift actuation or of Horizontal Stabiliser Trim Actuators.If your experience is not within the Aerospace industry, then stress analysis experience of other complex mechanical components and assemblies will be considered. Deliverables include static and fatigue stress calculations, stress summaries and reports and approval of component and assembly drawings. Support to the development department may be required involving compilation or review of test specifications, defining loading cycles for test and reviewing test results.Key Skills and Experience:Proven capability in stress analysis, ideally of high lift actuation components and assembliesAble to prepare stress calculations and reports to a high standardReviewer of test specifications and reports (QTP, QTR, ATP etc.)Able to manage priorities and multi-task efficientlyContributes to knowledge sharing within the stress analysis groupProvide assistance to other stress engineers when requiredConfident engaging peers, management and customers in stress related discussionsContributes technical knowledge to the Engineering team in support of analysis methods, research activities and failure investigationsKnowledge of static (Proof / Ultimate), fatigue and impulse testing is an advantageMRB / Non-conformance experience will be an advantageExperience in hand calculations is essentialExperience using Mathcad would be an advantageCAD (SolidWorks or Unigraphics NX) experience is desirableExperience of FEA is required, competence using ANSYS is an advantageKnowledge of aerospace materials, their mechanical, static and fatigue properties and the influence of manufacturing processes on the strength of components will be beneficial.Good communication skillsProactive and driven – will make things happenSecurity ClearanceBaseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. For further information please visitIn Return Moog can offer you:You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally.Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension contribution starting at 6%, Employee Share Options.You Matter at Moog – Our Mission and VisionAt Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.SummaryLocation: Wolverhampton, GBRType: Full time

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title:Product EngineerReporting To:Engineer Sr., ProductWork Schedule:Hybrid – Wolverhampton, GBRAs a Product Engineer, you will report to the Senior Product Engineer (Global Sustainment or Original Equipment) and provide engineering support across assigned product lines at Wolverhampton. Due to the continued growth of our operations, this role offers the opportunity to work on increasingly complex products that require technical guidance and innovative solutions. You will collaborate closely with other Product Engineering team members and work independently when required. The role may also involve leading special projects. You will support workshop technicians with technical queries, perform engineering investigations, prepare repair and assembly documentation, and contribute to product improvement initiatives that influence overall product performance, cost, and reliability. You may also engage in customer- or supplier-facing activities, such as during engineering investigations or product validation. The ideal candidate will be an enthusiastic problem solver, capable of coordinating activities across multiple departments. Your work will have a direct impact on product quality, turn-around times, and cost efficiency.Key ResponsibilitiesWorking under the direction of the Senior Product Engineer, your responsibilities will include:• Generate and maintain repair and assembly work instructions• Specify, implement, and validate product rework methods• Promote a culture of compliance with procedures to maintain product integrity, collaborating with Design Engineering, Manufacturing, Quality, Programs, Test Equipment, EHS, and Supply Chain to resolve issues• Lead and implement process improvements aligned with business objectives• Support the introduction of new product lines and repairs (OE and GS)• Design, improve, and organize repair and assembly tooling to meet requirements• Review test equipment and propose improvements• Review and assist in the proofing of technical publications• Coordinate and conduct engineering investigations• Produce technical reports and documentation• Raise and monitor non-conformance reports (NCs)• Track and improve First Pass Yield (FPY) to enhance performance• Facilitate design changes through drawing redlining and initiating ECN processes• Troubleshoot and resolve technical issues in repair, assembly, and test areasKey Skills & Expertise• Degree in a relevant engineering discipline or equivalent experience in aerospace or a similarly complex industry• Strong understanding of hydraulic and mechanical actuation, with ability to diagnose faults and specify rework• Ability to identify producibility and quality improvements in assembly, test, and product design• Capacity to make engineering judgments and produce technical justifications• Ability to work directly from engineering drawings, CMM data, service bulletins, process specifications, and test procedures• Proficiency in Microsoft Office and general computer literacy• Experience in aerospace maintenance or OE production environments is preferred• Strong written and verbal communication skills• Experience coordinating with customers and suppliers on complex projects is desirable• General knowledge of Root Cause / Corrective Action, Lean principles, project planning, data acquisition, and analysisWhat We OfferMoog Named to Glassdoor’s 2026 Best Places to WorkFlexible benefits package and development opportunities to support career progression33 days annual leave (including bank holidays)Private medical insurance, mental health support and financial adviceGenerous life assurance and company pension contribution (from 6%)Employee share options, EV chargingSecurity ClearanceBaseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. For further information please visit www.gov.uk.We review applications on an ongoing basis, and the job posting will be closed once a suitable candidate is selected. We recommend all interested individuals to apply as soon as possible.You Matter at Moog – Our Mission and VisionAt Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.#LI-LW1#LI-HybridSummaryLocation: Wolverhampton, GBRType: Full time

Join us at a pivotal moment, where investment operations expertise, data integrity, and process excellence come together to underpin effective LGPS pooling and deliver strong outcomes. \n \n The Private Markets Operations Analyst plays a key role within the Investment Operations team, which provides essential support to the Investment function. This position is responsible for ensuring the smooth and accurate processing and support for new investment activity and life cycle support of existing investments. \n \n The role involves daily interaction and collaboration with internal teams across the firm, primarily the Investment teams but also including Client Services and Compliance, as well as with key external partners such as the Fund Administrator/Accountant, technology vendors and the General Partners. The successful candidate will contribute to the continuous improvement of operational processes, support the implementation of investment strategies, and help ensure regulatory and procedural compliance in line with best practice and LGPS Central’s commitment to excellence in asset management. \n \n What you'll be doing: \n As our Investment Operations Analyst (Private Markets), here's an insight into what you'll be getting up to: \n Fund and LP Administration \n\n • Provide operational support to Fund Managers.\n, • Preparing cashflow notices and managing cashflow activity with investors and General Partners.\n, • Bank and cash management and reconciliation\n, • Managing foreign exchange requirements\n, • Monitoring, processing and payment of invoices\n, • Oversight of the Fund Administrator for outsourced services including reviewing ongoing KPI and SLA performance\n, • Resolving investor queries\n, • Supporting internal audits\n, • Contribute to the development of the Target Operating Model\n, • Ad-Hoc project support\n\n Accounting and Reporting services \n\n • Maintaining investment and accounting records\n, • Reconciling financial statement line items\n, • Supporting valuation of investments\n, • Annual accounts preparation in compliance with FRS 102\n, • Preparing performance calculations\n, • Annual financial statement audit liaison\n, • Cost transparency reporting\n, • Preparation of quarterly performance reporting\n\n Regulatory and compliance \n\n • Periodic monitoring and review of the investors admitted and entities activity\n, • Compliance monitoring and reporting\n, • Formulating and implementing detailed compliance procedures in relation to applicable regulatory requirements.\n, • Preparing AIFMD Annex IV reporting\n, • Liaising with tax advisor for partnership tax compliance and tax structuring\n, • Ensuring compliance with Limited Partnership Agreement for administrative functions\n\n \n About Us \n LGPS Central (LGPSC) Ltd is the FCA regulated asset manager for fourteen local authority pension funds across the Midlands. LGPSC is jointly owned on an equal shares basis by those Partner Fund, and it is responsible for managing £100bn+ of their assets. It is one of six Local Government Pension Scheme (LGPS) asset pools in the UK. \n \n LGPS Central’s Partner Funds are: \n\n • Cheshire Pension Fund\n, • Derbyshire Pension Fund\n, • Leicestershire Pension Fund\n, • Nottinghamshire Pension Fund\n, • Shropshire Pension Fund\n, • Staffordshire Pension Fund\n, • West Midlands Pension Fund\n, • Worcestershire Pension Fund\n, • Gloucestershire Pension Fund\n, • Hampshire Pension Fund\n, • Sulfolk County Council\n, • Wiltshire Pension Fund\n, • Norfolk Pension Fund\n, • Oxfordshire Pension Fund\n\n \n The Company is committed to responsible investment and has made responsible investment a core part of the investment process in every asset class. \n LGPS Central offers a friendly and diverse, hybrid working environment with a range of employee benefits. The Company moved to new premises at i9, Wolverhampton Interchange in January 2022, close to local transport links. \n Our objective is to be a leading investment management company working with and for our Partner Funds. With a focus on value for money and performance we want to aspire to be one of the best because this is how we will deliver the superior investment returns and low costs for our Partner Funds \n \n Requirements \n\n • Previous Fund Administration and/or Fund Accounting experience for Private Market investments, from either an Asset Management or Fund Administrator background.\n, • Some previous experience of supporting any of Private Equity, Private Debt, Infrastructure, Property investments is a must.\n, • An understanding of the roles played by an Outsourced Administrator.\n, • Any experience of Charles River, eFront or similar platforms would be an advantage.\n, • Competent grasp of the ‘life of a trade’ structure, knowledge of investment and accounting requirements and preparation of call and distribution notices.\n, • Understanding of regulations pertaining to Private Market investments.\n, • Proven track record of outstanding customer service, ideally servicing Financial Institutions.\n, • High attention to detail, analytical.\n, • Able to communicate complex and highly-technical matters in a way which is understandable and relevant.\n, • Confidence when communicating.\n, • Strong reasoning and problem-solving skills, able to develop pragmatic solutions to complex problems.\n, • Able to build effective relationships across all levels of the company.\n, • Highly organised and able to work to deadlines and manage competing priorities under significant time pressures.\n, • Strong interpersonal, communication and people management skills.\n, • Ability to challenge appropriately.\n, • Ability to think outside the box.\n\n \n Qualifications: \n\n • Degree level or equivalent\n\n \n What do we offer? \n We are proud to provide our people with a premium and exclusive benefits package and we are continually improving the rewards we offer. Here are a few of the valuable rewards that you will enjoy: \n\n • Competitive salary\n, • An enhanced and generous Pension Scheme\n, • 30 days' paid holiday plus bank holidays\n, • 2 days paid volunteering days\n, • An extra paid Company Day in addition to paid holidays\n, • Excellent Learning & Development Opportunities\n, • Welfare and Family friendly policies\n, • Enhanced pay for new parents\n, • Access to our Employee Assistance Programme 247 Health & Wellbeing Support\n, • Vitality Private Medical Insurance\n, • Hybrid Working\n, • Company Service Awards\n, • Cycle to work scheme\n, • Company Electric Vehicle Scheme\n, • Winner of the Cultural Awareness Initiative of the Year FT Advisors Diversity in Finance Awards 2023\n, • Winner of Diversity and Inclusion Award LAPF In Investments Award 2023\n, • Winner of LAPF Investment Innovation\n, • Winner of Pool of the Year 2025\n

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title:Senior Principal Software EngineerReporting To:Dir. Engineering, Product Integrity & Tech Bus. DevelopmentWork Schedule:Hybrid – Tewkesbury, GBRAbout Moog Aircraft GroupMoog Aircraft Group is a world leader in flight control systems for commercial and military aircraft. We design and manufacture high-performance actuation and control solutions that enable safer, more efficient flight. As part of our team, you’ll work on cutting-edge technologies that power next-generation aircraft.About the RoleWe are seeking a Senior Principal Software Engineer to lead the development of software for advanced flight control and actuation systems. This role requires deep expertise in safety-critical software development, real-time embedded systems, and aerospace compliance standards. You will influence architecture decisions, mentor engineering teams, and ensure our software meets the highest standards of reliability and certification.Key ResponsibilitiesTechnical Leadership: Define software architecture and technical strategy for flight control and actuation systems.System Design: Develop real-time embedded software for actuation systems and flight control computers.Integration: Collaborate with hardware, systems, and test engineers to ensure seamless integration of software with Moog’s actuation products.Compliance: Ensure adherence to aerospace standards such as DO-178C and ARP4754A throughout the development lifecycle.Mentorship: Guide and mentor engineers, promoting best practices in safety-critical software development.Quality Assurance: Drive rigorous verification and validation processes for mission-critical software.QualificationsExperience: 15+ years in software engineering, with significant experience in aerospace or safety-critical systems.Technical Skills: Proficiency in C/C++ for embedded systems; experience with writing software for flight control electronics.Architecture: Expertise in deterministic, fault-tolerant systems for flight control applications.Regulatory Knowledge: Strong understanding of DO-178C certification and related standards.Education: Bachelor’s or Master’s in Computer Science, Computer Engineering, or related field.Preferred QualificationsExperience with model-based development (MATLAB/Simulink).Familiarity with ARINC standards and MIL-STD protocols.Background in flight control actuation and fly-by-wire systems.What We OfferFlexible benefits package and development opportunities to support career progression33 days annual leave (including bank holidays)Private medical insurance, mental health support and financial adviceGenerous life assurance and company pension contribution (from 6%)Employee share options, free onsite parking and EV ChargingYou Matter at Moog – Our Mission and VisionAt Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.#LI-TB2SummaryLocation: Tewkesbury, GBR; Wolverhampton, GBRType: Full time

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title:Manufacturing Engineering Team LeadReporting To:Manufacturing Engineering ManagerWork Schedule:Onsite – Wolverhampton, GBRWe are seeking a Manufacturing Engineer Team Leader to supervise and manage the resource of our Manufacturing Engineering Team in the day-to-day running of our machine shop. The successful candidate will be responsible for setting and monitoring workload priorities, individual targets, and offering guidance on best manufacturing practices while leading the shop floor route cause corrective actions. Responsibilities Include Manage and mentor the Manufacturing Engineering team, both shop floor and personnel management. Direct work assignments, scheduling, and review of work in progress. Support personnel actions including performance reviews, and coordination of training and development. Establish and deliver lean processes into the manufacturing environment. Work with the Manufacturing Engineering Manager in identifying key process improvement projects. Create and support the deployment of effective methods and processes based on 3D models for product launch into the manufacturing area. Help establish standard times for each operation ensuring minimisation of the 7 wastes. Support Manufacturing Engineer(s) / Technician(s) in the creation, review, and approval of gauging, fixtures, and special tooling. Provide support and technical assistance to other departments on the facility and, at times, globally. Responsible for shop support resource allocation and direct involvement with any support actions. Key Skills and experience: BSc Degree (vocational, professional, or advanced) or equivalent in the field of Mechanical/Production/Manufacturing Engineering/Leadership. (Preferred). HNC/ HND (vocational, professional, or advanced) or equivalent in the field of Mechanical/Production/Manufacturing Engineering. Progressive experience (usually post-education) in the field of manufacturing/process engineering. Progressive experience (usually post-education) in the field Lean methodologies and Zero Defects. Proven previous knowledge of machining practices including but not limited to; Mill/Turn - 5 Axis Milling - Grinding - Gear Cutting - Spark / Wire Eroding - Honing / Lapping Proven leadership / management qualities including 1 to 1 support, development of training plans and workload resource management. Security ClearanceBaseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. For further information please visit www.gov.uk.In Return Moog can offer you:You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally.Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension contribution starting at 6%, Employee Share Options.You Matter at Moog – Our Mission and VisionAt Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.SummaryLocation: Wolverhampton, GBRType: Full time

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title:Project EngineerReporting To:Management, Design EngineeringWork Schedule:Onsite – Tewkesbury, GBRAbout Moog Aircraft Group:Moog Aircraft Group is a world leader in flight control systems for commercial and military aircraft. We design and manufacture high-performance actuation and control solutions that enable safer, more efficient flight. As part of our team, you’ll work on cutting-edge technologies that power next-generation aircraft.About the Role:Moog Commercial Aircraft Group is seeking an experienced Project Engineer to support the delivery of commercial flight control products. This role acts as a key technical and project interface between the C929 programme team, internal engineering functions, and external suppliers, including our strategic partner Qing’an. You will be responsible for flow-down of engineering requirements, supplier coordination, and ensuring alignment across design, qualification, and production phases. The role is critical to maintaining technical integrity, supporting manufacturing execution, and ensuring delivery to quality, cost, and schedule targets. This position requires strong communication skills and the ability to work effectively across cultures and time zones to ensure issues are clearly defined, communicated, and resolved efficiently. You will report to the Commercial Engineering Manager (Design) and will be based at either the Wolverhampton or Tewkesbury Moog site.As a Project Engineer, you will:Lead and coordinate assigned projects from design and qualification through to production and delivery.Track and report progress against key programme metrics including schedule, cost, milestones, and risk.Provide structured updates to project leadership, programme management, and engineering stakeholders.Act as the primary interface between Moog cross-functional teams (design, systems, stress, quality, supply chain) and suppliers, including Qing’an.Support supplier design and development activities, including requirement interpretation, engineering reviews, and validation of complex aerospace hardware.Plan and lead supplier technical reviews (e.g. PDR, CDR), ensuring compliance with Moog, customer, and regulatory requirements.Develop and maintain key technical documentation, including Statements of Work (SOW) and Source Control Documents (SCD).Maintain effective configuration control, including change management and documentation accuracy.Support transition to production, ensuring manufacturability, process capability, and adherence to aerospace quality standards.Monitor supplier performance, design maturity, and technical risks; proactively escalate issues with clear mitigation plans.Create and maintain project documentation including plans, status reports, action logs, and meeting records.Travel as required (UK, Asia, and USA) to support programme delivery.To be considered for the Project Engineer role, here’s what you’ll need to bring with you: Bachelor’s degree in Mechanical or Aerospace Engineering.Minimum 5 years’ experience in aerospace or precision manufacturing.Proven experience in project engineering, technical coordination, or similar roles.Strong understanding of New Product Introduction (NPI) and configuration-controlled development.Knowledge of aerospace manufacturing processes and quality systems (e.g. AS9100).Excellent communication skills, with the ability to present clearly to internal and external stakeholders.Experience leading technical meetings and producing structured technical reports.Ability to interpret and communicate complex engineering data.Strong problem-solving and root cause analysis capability.Knowledge of requirements management.Demonstrated experience working with global teams and suppliers across multiple time zones.Strong organizational skills with the ability to manage multiple priorities effectively.It would be great if you also had:Experience working in a mechanical design and or manufacturing engineering role is advantageous.Experience with rotating equipment and/or hydraulic systems.Familiarity with PLM/PDM systems (e.g. Teamcenter) and ERP tools (e.g. SAP).Proficiency with Office 365 tools (Teams, SharePoint) and data/reporting tools (Excel, Power BI).Personal attributes:Confident and effective communicator, comfortable engaging with customers, suppliers, and senior stakeholders.Proactive, organized, and results-driven, with strong ownership of deliverables.Collaborative team player, able to work independently and across functions.Calm under pressure, with the ability to prioritize competing demands.Professional and customer-focused, with strong stakeholder management skills.How we care for you:Flexible benefits package and development opportunities to support career progression33 days annual leave (including bank holidays)Private medical insurance, mental health support and financial adviceGenerous life assurance and company pension contribution (from 6%)Employee share options, free onsite parking and EV ChargingYou Matter at Moog – Our Mission and Vision:At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.#LI-TB2SummaryLocation: Tewkesbury, GBR; Wolverhampton, GBRType: Full time

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title:Site Supply Chain ManagerReporting To:Director, Regional SC EuropeWork Schedule:Onsite – Wolverhampton, GBRMoog Aircraft Group is looking for a Site Supply Chain Manager. You will be a key member of the Military Aircraft Group at our facility in Wolverhampton within the Supply Chain and Purchasing Team, reporting directly to the Supply Chain Director.In the role you will have responsibility for supplier facing supply chain effectiveness. This may include cross-regional coordination to support site needs & upstream supplier integration into the product build and the delivery value stream.As the Supply Chain Manager, you will be involved in the provisions of Indirect/Direct Sourcing Categories, Supplier Quality, Strategic Sourcing Strategies and New Product Introduction.Whilst this is a heavy hands-on role with ensuring Moog is maximizing our Supplier Facing Supply Chain Effectiveness and maintaining our Supply Chain for the future, you will be a leader in the SCM team who will have the ability and confidence to Mentor and Coach those across our team within a unique and regulated environment.Key ResponsibilitiesEnsuring customer needs are met by coordinating and communicating with the wider Supply Chain organization and collaborating with adjacent functions in Operations, Quality, Engineering etc. to ensure the availability of materials and services on demand.Determine and communicate site priorities to Site Supply Chain Director and the rest of the organizationStand as the Supply Chain representative in the Site's Sales, Inventory and Operations Planning processOverseeing placement of POs in accordance with Terms & Conditions, contractual and regulatory flow-downs and Moog processesEnsure appropriate upstream supplier integration (e.g. demand visibility, lean/flow materials management, managing & automation of procurement process) and be the coordinating interface with site operations, planning and logisticsMonitor obsolescence management to minimize supply disruptions and cost impact.Represent the Supply Chain department for site leadership reviews, customer and process audits and assessments. Key Skills and Experience Bachelor’s degree in the field of Supply Chain, Material Management, Engineering or related fields with > 7 years of progressive experience (usually post-education) in the field of supply chain management in a manufacturing environment.The ideal candidate should have over 5 years in a supervisory/management position.Exhibit strong team leadership and people management skillsMaintain a sound, strategic perspective in their approach to the role, where long lead times and a high technical challenge for suppliers, demands forward thinking to be successful.Able to work well in an objective-driven environment where organisation and planning will be essential in achieving team goals.Ability to work with minimum supervision, problem solve, show imagination and resourcefulness in meeting the role’s objectives.Must have or be able to rapidly develop familiarity with the major customers, products, manufacturing processes and suppliers into the business.Willingness to travel to suppliers and customers where appropriate.Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. For further information please visit .In Return Moog Can Offer YouYou'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally.Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension contribution starting at 6% and Employee Share Options.You Matter at Moog – Our Mission and VisionAt Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.SummaryLocation: Wolverhampton, GBRType: Full time

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Are you the right candidate for this opportunity Make sure to read the full description below. Job Title : Mill/Turner Reporting To: Manager, Manufacturing Work Schedule: Onsite Wolverhampton, GBR Moog Aircraft Group is looking for an apprentice-trained, experienced CNC Machinist (Turner/Mill-Turn) . At Moog, we're focused on the customer and for us, this means designing complex mechanical products that are often bespoke and high-profile. Our Machinists work to exceptionally close tolerance, an essential requirement of the aerospace industry. Key Responsibilities: Set up and operate multiple CNC machines/processes. Perform first-off inspections and complete necessary quality documentation. Capability and competent in setting up and using machine tools Carry out own 1st off inspection and check/complete the necessary quality documentation Proven experience in a machine shop environment Competent in setting up and using machine tools Confident in using precision measurement equipment. Key Experience: Recognised engineering apprenticeship. Previous experience in an engineering/manufacturing role, ideally within the aerospace industry. Strong knowledge of machining techniques and appropriate tooling. Proven skills in a multi-axis/complex machining environment. Attention to detail, accuracy, and process improvement techniques. Proficiency in using relevant inspection techniques/equipment to achieve drawing tolerances. Over 5 years experience on different mill/turn CNC machines (Okuma , Mazak , Lathe, DMG , Matsura, Puma) Additional Information: This role follows a day shift pattern and may in the future lead to a 6.00am - 2.00pm. 2.00pm - 10.00pm or 10.00pm - 6.00am shift pattern. Candidates must be self-certified and hold a quality stamp after the qualifying period. Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally. Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension Contribution starting at 6%, Employee Share Options. You Matter at Moog Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). xrnqpay Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.

RedTech Recruitment Location/Place/Mode North Uttlesford / Greater Cambridge Area, UK (5 days onsite) Qualified Solicitor in England & Wales or equivalent recognised jurisdiction; significant post-qualification experience in-house and/or in a leading commercial law firm; strong experience drafting, reviewing, and negotiating complex commercial agreements; excellent knowledge of technology law, intellectual property, software licensing, and data protection legislation; strong commercial awareness; excellent communication and stakeholder management skills; applicants must be fully eligible to work in the UK without restriction, time limit, or sponsorship. Desirable: experience in AI, software, SaaS or high-growth technology company; knowledge of AI governance or emerging AI regulation; experience implementing legal operations, contract management systems, or compliance programmes. For commercially minded solicitors, the move from private practice into an in-house seat has long been described as 'crossing to the other side.' Yet today, that journey is no longer about leaving law behind – it is about rebuilding law as a strategic engine inside the business. The Internal Legal Counsel vacancy handled by RedTech Recruitment is a vivid illustration of this shift. Based in the North Uttlesford / Greater Cambridge Area, the role places legal at the very heart of a rapidly expanding technology company developing advanced hardware and AI software. For a lawyer who wants to draft the future rather than merely review it, this is an unusually compelling opening. Greater Cambridge is already one of Europe's most magnetic technology corridors. Companies building semiconductors, quantum computing, and artificial intelligence choose this region because talent, capital, and research converge there. Yet a sophisticated product alone cannot carry a business across regulatory thresholds. The job description makes this explicit: the business is looking for someone to 'establish and develop their in-house legal capability' and become a 'trusted advisor to senior leadership.' That language signals a greenfield, high-autonomy mandate. The successful counsel will not inherit a legal department; they will build one. 'This is a rare opportunity to join an ambitious technology business where legal is viewed as a strategic business function, helping to shape commercial decisions, manage risk, and support the company's continued growth.' The blockquote above is lifted directly from the posting, and it is worth pausing on. When an engineering-led company says that legal helps shape commercial decisions, it means the lawyer is being invited into product roadmaps, partnership negotiations, and board-level discussions. For an internal counsel, that is the difference between being a cost centre and being a value creator. The duties are broad and demanding. They span the full commercial lifecycle: • Drafting, reviewing, negotiating, and managing customer, supplier, partnership, licensing, SaaS, and confidentiality agreements., • Advising on AI technologies, software licensing, intellectual property, data protection, privacy, and emerging regulatory frameworks., • Supporting corporate governance, compliance, and risk management initiatives., • Monitoring UK and international legislation affecting AI and technology businesses., • Managing external counsel relationships and shaping the internal legal function. Notice how the role is not limited to contract review. It explicitly asks the counsel to help shape and develop a legal function. That implies exposure to legal operations, contract lifecycle management tools, and compliance programmes. For the right candidate, this is a mini general counsel role with a title that still says 'Internal Legal Counsel.' Because this is a greenfield legal function, you should expect the interview process to be deeply collaborative. The client will want to see how you think about ambiguity, how you present to engineers, and whether you can translate legal risk into business language. You may be asked to review a mock AI licensing agreement or to prepare a short presentation on AI governance. The final round will almost certainly include the CEO or CTO, because they are hiring a strategic advisor, not a document processor. On the surface, the requirements are familiar for a technology law role: a qualified solicitor in England and Wales or equivalent, significant PQE, and a background in commercial agreements. But the deeper profile they are screening for combines three rarer qualities. First, fluency in technology law. The job advert asks for excellent knowledge of intellectual property, software licensing, and data protection. In a world of AI training data, open-source licences, and cloud resiliency, a generic commercial solicitor will struggle. The candidate needs to understand how software is built, licensed, and deployed. Second, commercial pragmatism. The phrase 'pragmatic, business-focused legal advice' is repeated because in-house lawyers cannot simply say no. They have to engineer solutions that fit the company's risk appetite and speed. Third, the ability to stand up legal operations. The desirable criteria mention AI governance, responsible AI frameworks, contract management systems, and compliance programmes. That tells us the client wants someone who can codify legal processes, not just handle deals. There is also a hard eligibility condition: applicants must be fully eligible to work in the UK without restriction, time limit, or sponsorship. Candidates who require visa sponsorship should not apply. This is not discrimination; it is a practical constraint for a fast-moving early-stage legal function. The location is 'North Uttlesford / Greater Cambridge Area' and the role is 5 days onsite. That is a deliberate signal. The company values synchronous collaboration and wants its legal counsel embedded with engineers and commercial teams. If you prefer hybrid or remote work, this role is not for you. The deadline is not specified, so an early application is wise; roles like this frequently close within two or three weeks. To stand out, your CV should lead with measurable outcomes. Instead of 'drafted and negotiated commercial agreements,' write 'negotiated a global SaaS master agreement with an enterprise value of £Xm, reducing average negotiation cycle time by 20%.' Highlight any exposure to AI governance, DPIA workflows, or privacy engineering. If you have implemented a contract lifecycle management tool or a compliance framework, put that in a prominent section. Cover letters also matter. RedTech Recruitment is likely to forward your profile directly to the client, so a short cover letter that names the sector (AI hardware + software) and explains why you want to build an in-house function will separate you from the hundreds of solicitors who simply attach a CV. For any mid-career solicitor, this role is a launching pad. A successful hire will spend the first year untangling existing agreements, building relationships with senior leaders, and creating a commercial playbook. From year two, the natural evolution is to a General Counsel or Head of Legal position, with equity and leadership responsibilities in a company that could be a future Category Leader. More importantly, the role provides a front-row seat to the defining legal questions of our era: who owns training data, what does 'fair use' mean in machine learning, and how can a hardware company protect its IP while embracing open standards? These are not questions you can learn from textbooks. They are answered by participating in real deployments, and this role puts you in the room. If you are serious about this application, also take time to research the broader regulatory landscape. The UK government has continued to position itself as pro-innovation on AI, but the EU AI Act and evolving case law are already influencing contract templates. Demonstrating that you can monitor these developments and tell your client what they mean for a hardware/software business will give you a genuine edge in the interview. The job posting does not specify a formal deadline. Since RedTech Recruitment posted the job only recently and has already received 28 applicants, interested candidates should apply as soon as possible through the LinkedIn job link. Yes. The advert states that applicants must be fully eligible to work in the UK without restriction, time limit, or sponsorship. The employer is not offering visa sponsorship for this position. No. The position is based in the North Uttlesford / Greater Cambridge Area and requires working on-site 5 days a week. Candidates who are not able to commit to an onsite schedule are unlikely to be considered. Beyond the formal requirements, the ideal candidate has deep commercial contracts experience, strong technology law knowledge (especially AI, IP, software licensing, and data protection), and the ability to help build the legal function. Being comfortable presenting to senior leadership is essential. #J-18808-Ljbffr

Field Sales Executive / Charity Fundraiser£26,400 Basic Salary + Uncapped Bonus | Realistic OTE £45,000£55,000+ | Weekly Pay Are you an experienced Field Sales Executive, Charity Fundraiser, Face-to-Face Sales Representative, Venue Sales Executive, or Customer Acquisition Specialist looking for a role where your people skills can make a genuine impact? At Charity Link, we're recruiting ambitious and motivated Field Sales Executives to represent some of the UK's most respected and recognisable charities. If you have a background in face-to-face sales, direct sales, fundraising, telecoms, utilities, venue sales, door-to-door sales, or customer engagement, this is an opportunity to combine exceptional earning potential with meaningful work. Why Join Charity Link? As one of the UK's leading face-to-face fundraising organisations, we've spent over 30 years helping charities secure the long-term support they need to change lives. Our people are at the heart of that success. What You'll Receive ? £26,400 guaranteed basic salary ? Uncapped bonuses and regular incentives ? Realistic On-Target Earnings (OTE) of £45,000£55,000+ ? Weekly pay ? Healthcare cash plan worth up to £900 per year ? Award-winning training and ongoing development ? Generous employee referral scheme ? Company pension scheme ? Exclusive discounts at over 30,000 retailers ? Long-service rewards including extra annual leave, cash gifts and enhanced healthcare benefits ? Clear career progression opportunities into senior fundraising and sales leadership roles The Role Field Sales Executive / Charity Fundraiser As a Field Sales Executive and Charity Fundraiser, you'll work at high-footfall private venues, shopping centres, supermarkets and events, engaging directly with members of the public on behalf of nationally recognised charities. Using your communication and sales skills, you'll inspire supporters to sign up for regular monthly donations or sponsorship programmes that provide vital long-term funding for life-changing charitable work. This is a fast-paced, rewarding and highly interactive role where you'll meet new people every day, build genuine connections and make a measurable difference through every successful sign-up. Who We're Looking For We're keen to hear from candidates with experience in: • Field Sales, • Face-to-Face Sales, • Direct Sales, • Charity Fundraising, • Door-to-Door Sales, • Venue Sales, • Customer Acquisition, • Brand Ambassador Roles, • Telecoms Sales, • Utility Sales, • Retail Sales, • Event Sales, • Lead Generation, • Customer Service and Sales You'll thrive in this role if you are: • Confident approaching and engaging with new people, • Resilient and motivated by achieving targets, • Positive, energetic and self-driven, • A strong communicator who can build rapport quickly, • Passionate about helping worthwhile causes, • Looking for a long-term career with genuine progression opportunities Previous charity fundraising experience is beneficial but not essential. If you've succeeded in field sales, direct sales, customer-facing roles, or lead generation, we'll provide all the training and support needed to help you excel. About Charity Link For more than three decades, Charity Link has partnered with some of the UK's most prestigious charities, helping them raise millions of pounds through professional face-to-face fundraising campaigns. Our success is built on investing in our people. We provide industry-leading training, continuous support, recognition for achievement and genuine opportunities for career advancement. When you join Charity Link, you'll become part of a supportive and experienced team that celebrates success, values hard work and helps individuals build rewarding careers in both charity fundraising and field sales. Diversity, Equity & Inclusion At Charity Link, we know that diverse teams deliver stronger results, encourage innovation and create better outcomes for the communities we support. We are committed to creating an inclusive workplace where everyone is treated fairly, respected and given equal opportunity to succeed. We welcome applications from people of all backgrounds, experiences and identities. Whether you're an experienced Field Sales Executive, Charity Fundraiser, Venue Sales Representative, or looking to bring your transferable sales skills into the charity sector, we'd love to hear from you. Apply Today Take the next step in your career as a Field Sales Executive, Charity Fundraiser, Face-to-Face Fundraiser, Private Site Fundraiser, or Direct Sales Representative with Charity Link. Earn great rewards, develop your sales career, and help some of the UK's most important charities continue their life-changing work. JBRP1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : A & T Technician Reporting To: Team Leader (Assembly & Test) Work Schedule: Onsite Wolverhampton, GBR Moog Aircraft Group is seeking experienced Assembly & Test Technicians to join our team at our Wolverhampton facility. At Moog, we focus on the customer, designing complex mechanical products that are often bespoke and high-profile. Our team works to exceptionally close tolerances, an essential requirement of the aerospace industry. We know how important our technicians are to our business, and we offer the opportunity for the development of your skills and progression. Join us and be part of a team that values precision, quality, and innovation to shape the way our world moves. Working 37 hours per week; Monday to Thursday 7.30 am 4.15 pm and Friday 7.30 am 11.30 am. Key Responsibilities: Assembly and test of flight-critical actuators and subcomponents with high precision and accuracy. Using measuring equipment such as micrometers, vernier calipers, and height gauges to inspect component parts. Working from engineering drawings and component maintenance manuals. Completing quality audits and taking responsibility for various aspects of the A&T process, including the release to service of repaired actuators. Key Skills: Apprentice trained (or equivalent level of qualification) ideally within Mechanical Engineering. Proven experience within an engineering/manufacturing role is essential, ideally within aerospace or related industries. Good knowledge of assembly and test manufacturing. Competent in reading and following different set procedures. Experience working within an aerospace quality system is desirable. Dynamic and proactive attitude. Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally. Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension contribution starting at 6%, Employee Share Options. You Matter at Moog Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply. TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : Manual/CNC Cylindrical Grinder Reporting To: Team Leader Parts Generation Work Schedule: Onsite Wolverhampton, GBR At Moog, we empower you to achieve great things in a supportive, trust-driven environment. Tackle complex challenges with a team that values integrity, collaboration, and innovation. Enjoy job satisfaction, competitive rewards, and a family-like atmosphere where your contributions matter. Grow with talented colleagues who share our passion for shaping the way our world moves. Job Summary Moog Aircraft Group is looking for an apprentice trained, experienced Manual / CNC Grinder to join the team at our facility based in Wolverhampton on Shifts once training is completed. At Moog we're focused on the customer and for us this means designing complex mechanical products that are often bespoke and high profile. Our Machinists work to exceptionally close tolerance, an essential requirement of the aerospace industry. Responsibilities Include Experience in Setting, Operating Manual Cylindrical machines S20/RM250 and Setting CNC ( Preferably Studer S33/S31) Capability of machining exotic and hardened materials Carry out own 1st off inspection and check/complete the necessary quality documentation Precision manual cylindrical grinding, working to achieve limits to 0.00005" Able to set and run multiple machine / processes. Key Skills and experience: A recognised engineering apprenticeship Cylindrical grinding experience essential Mate grinding experience preferred Previous experience within an engineering/manufacturing role within the aerospace industry Good knowledge of machining techniques and appropriate tooling Attention to detail and accuracy and process improvement Using the relevant inspection techniques/equipment to achieve drawing tolerance This role will require the individual to work a shift pattern, including nights and overtime when requested. The role requires the candidate to be self-certified and a quality stamp holder after qualifying period. Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally. Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension Contribution starting at 6%, Employee Share Option. You Matter at Moog Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Embrace the journey and explore exciting possibilities! Your CV will be stored in our central recruitment database upon applying at Moog. Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply. TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Read the overview of this opportunity to understand what skills, including and relevant soft skills and software package proficiencies, are required. Job Title : CNC/Manual Mate Grinder (Nights) Reporting To: Team Leader Parts Generation Work Schedule: Onsite Wolverhampton, GBR At Moog, we empower you to achieve great things in a supportive, trust-driven environment. Tackle complex challenges with a team that values integrity, collaboration, and innovation. Enjoy job satisfaction, competitive rewards, and a family-like atmosphere where your contributions matter. Grow with talented colleagues who share our passion for shaping the way our world moves. Job Summary Moog Aircraft Group is looking for an apprentice trained, experienced Manual / CNC Grinder to join the team at our facility based in Wolverhampton. At Moog we're focused on the customer and for us this means designing complex mechanical products that are often bespoke and high profile. Our Machinists work to exceptionally close tolerance, an essential requirement of the aerospace industry. Responsibilities Include Experience operating, setting Manual Studer machines S20/RM250 and operating/ setting CNC (Studer S33/S31) Capability of machining exotic and hardened materials Carry out own 1st off inspection and check/complete the necessary quality documentation Precision manual land grinding, working to achieve limits to 0.00005" Able to set and run multiple machine / processes. Night shift (includes a generous shift allowance; note: allowance is not paid during the training period ) Key Skills and experience: A recognised engineering apprenticeship Mate grinding experience required Previous experience within an engineering/manufacturing role within the aerospace industry Good knowledge of machining techniques and appropriate tooling Attention to detail and accuracy and process improvement Using the relevant inspection techniques/equipment to achieve drawing tolerance This role will require the individual to work a shift pattern, including nights and overtime when requested. The role requires the candidate to be self-certified and a quality stamp holder after qualifying period. Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally. Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension Contribution starting at 6%, Employee Share Option. You Matter at Moog Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Embrace the journey and explore exciting possibilities! Your CV will be stored in our central recruitment database upon applying at Moog. Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). xrnqpay Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.

Skills/Experience:Extensive Fund Administration/TA Expertise: Demonstrated experience in Transfer Agency/Investor Services/fund administration, ideally in private equity or alternative asset environments. Role/ Department:The Fund Administration/Transfer Agency Lead (Guernsey) is a leadership positi

Gain exposure to a diverse client base, including large international and mid-cap private equity houses, infrastructure funds, multi-national companies and emerging capital providers. Structured around our four key pillars – Private Equity, Real Assets, Corporate Transactions, and Investment Manag

Job DescriptionSupport the execution of private equity investments across Europe and the United StatesConduct detailed financial analysis, valuation modelling, and due diligence on potential opportunitiesAssist in the preparation of investment memos and presentations for internal committeesWork clos

Role/ Department:A vacancy has arisen in our Private Equity (PE) Operations team. Skills/ Qualifications:The successful candidate will benefit from having: Previous experience of fund accounting or fund administration of private equity funds, credit funds or perpetual funds is necessary;The ideal ca

A large global fund management company is seeking to employ a Fund Administrator to be based in its Jersey office, within their Private Equity team. The successful candidate will be expected to have some practical experience within fund/private equity administration, strong communication skills and

Manager, Private Equity Accounting & Administration (Hybrid role)Location: JerseyDepartment: Fund SolutionsVacancy type: Permanent, 35 hours per weekThe positionCSC is a leading provider of fund administration and outsourced services. In this hybrid Manager role, you will lead a Private Equity clien

We're partnering with a leading investment management firm, spanning Private Equity, Venture Capital and a publicly listed Holding Company, with a multi-billion dollar portfolio across financial services, technology, infrastructure and consumer sectors, to find a. Ownership of the Group consolidatio

This is an outstanding opportunity to join a market-leading private equity practice, work on sophisticated sponsor-led transactions and build your career within a team offering excellent development and long-term progression. An exciting opportunity has arisen to join the Private Equity Transactions

The role involves handling the full range of corporate work, including mergers and acquisitions, shareholders agreements, corporate restructurings, joint ventures and private equity.

Bain & Company is seeking a Consultant for the Technology Insights Group, joining a rapidly growing team that advises PE investors on software businesses.You will work with global tech leadership and PE teams to assess leading software companies, shaping investment theses and growth strategies.The r

Grant Thornton in the UK is seeking an Associate Director to lead TAS Tax engagements for private equity and corporate clients.

We're working confidentially with a multi-strategy investment management firm — spanning private equity, venture capital, and a listed holding company — managing a multi-billion dollar portfolio across financial services, technology, infrastructure and consumer sectors. Experience in private equ

You will handle the full range of corporate work including mergers and acquisitions, shareholders agreements, corporate restructurings, joint ventures and private equity.

Private Equity Insights, headquartered in London, seeks a Head of Finance to own the company’s finances, working directly with the CEO, reporting to investors monthly and taking part in board meetings.

InforCapital, partnership is seeking a Vice President for its Real Estate team in London.This role involves leading the evaluation and execution of real estate investment opportunities across multiple sectors.The ideal candidate will have over 6 years of experience in real estate investing, strong t

As Clay's adoption expands across Private Equity firms and their portfolios, we're investing in a dedicated role to build and scale our PE partnerships motion end-to-end. Private Equity Business Development - shaping how Clay shows up to PE firms, building relationships with Operating Partners and V

You will advise private equity and corporate clients on M&A transactions, tax due diligence and transaction structuring, leading projects and mentoring junior staff.

The Corporate & Private Equity team’s main focus is on M&A and Private Equity transactions; we handle complex and high-value matters, and our clients are generally based in London, but also across the UK and internationally. Working within the Corporate & Private Equity team:. We’re seeking a dr

You will invest with leading private equity secondaries sponsors and participate in a wide array of secondaries deals involving the acquisition of private equity fund stakes, and general partners-led transactions. Represent GIC with private equity managers, company management, counterparties and int

The Private Equity practice area at this top international firm sits within the corporate and finance practice group. The team acts for both private equity houses, institutional investors and corporates across a range of sectors. The team has broad experience of corporate and funds transactions, wit

You will lead complex client workstreams for Private Equity clients, translating rigorous analysis into commercial recommendations and guiding both due diligence and value creation initiatives.

Hydrogen Group in London is seeking a Senior Associate to join its corporate/private equity practice.

Senior Transaction Manager, Private Equity (4/1) 22929. Are you an intellectually curious, dynamic, and analytical professional with 5+ years Private Equity experience?. Our client is looking for an exceptional individual with a background in transaction management and investment services, to projec

The successful candidate will possess significant experience in private company M&A and a proven track record of delivering high-quality transactional advice.

BDO UK LLP in London (Baker Street) is recruiting a Markets Activation Senior Manager to develop and deliver business development strategies aligned to growth priorities.You will partner with senior stakeholders, connect central propositions to local execution and drive cross‑functional collaborat

Director - Private Equity Sponsor Coverage page is loaded## Director - Private Equity Sponsor CoverageApplylocations: Londontime type: Full timeposted on: Posted Todayjob requisition id: 10077408-WDDo you want your voice heard and your actions to count?Discover your opportunity with Mits

Oliver James is seeking a Senior (or qualified) Legal Counsel to join a leading private markets investor in London.

The right candidate will be a qualified accountant (ACA or similar) with solid post-qualification experience spanning both in-house finance and the fund side of a private equity or venture capital firm. We are working exclusively with a fast-growing private equity firm based in Central London to app

Astral Legal seeks a Senior Legal Counsel to join a London-based secondaries platform within a leading global private markets investment manager.

PRO-TAX RECRUITMENT LIMITED is seeking a Private Equity Tax Partner in London. This role represents a strategic leadership opportunity to develop the firm's private equity offering while advising clients throughout the investment lifecycle. The ideal candidate will have extensive private equity tax

Meraki Talent is seeking an experienced Managing Consultant to lead high-impact transformation and optimisation programmes for private equity clients.

Private Equity Associate - Legal 500 Firm - London. This is an excellent opportunity for an ambitious associate to work on high-quality, fast-paced private equity transactions within a supportive firm offering flexibility, progression, and a competitive remuneration package. Advising private equity

You will build advisory relationships with senior executives and present research, due diligence, M&A, and portfolio management solutions to both current and prospective Private Equity clients. Evalueserve, a global AI-enhanced managed services leader, is seeking a senior Sales professional to drive

Private Equity Insights is part of United Media (https://www. HR, private equity, retail, etc.

Leading international law firm in London seeks a private equity associate with 3–5 years PQE to join a market-leading team.