Production assembly jobs in RadcliffeCreate job alerts

Maintenance Engineer Bolton 3 Shift Pattern £48,000 + Bonus A leading global automotive supplier specialising in advanced vehicle components and systems for major OEMs worldwide. Join a world-class team driving the future of automotive manufacturing We are a premier Tier 1 automotive supplier with a strong presence in the UK, delivering innovative, high-quality components to the world's leading vehicle manufacturers. Our Bolton facility is a key high-volume production site focused on precision assembly and testing systems, and we are now seeking an experienced Maintenance Engineer to join our dynamic engineering team. This is a hands-on role ideal for a proactive, skilled tradesperson who thrives in a fast-paced, high-output manufacturing environment. You will play a critical role in maximising equipment uptime, driving continuous improvement, and supporting our commitment to world-class production standards. Responsibilities – Maintenance Engineer • Troubleshooting, repair, and maintenance of high-volume PLC-controlled production equipment, • Planning and performing preventative maintenance on critical assets, • Improvement and modification of assembly/test equipment and transfer systems, • Service and maintenance of electrical and mechanical site services/plant, • Supporting the installation and commissioning of new equipment Experience/Qualifications - Maintenance Engineer • Ideally qualified to ONC/HNC level (or equivalent) in Mechanical/Electrical Engineering, supported by City & Guilds Part 3 (or similar) and NVQ Level 2 & 3, • Time-served apprenticeship in a relevant engineering discipline, • Significant hands-on experience (minimum 2+ years) in high-volume manufacturing environments, • Proven track record in equipment repair, maintenance, and process improvement, • Experience in fitting, fabrication, and machining is highly advantageous, • Strong background in maintenance and fault-finding on PLC-controlled and robotic high-volume equipment (ideal but not essential), • Solid experience maintaining and diagnosing faults in hydraulic and pneumatic systems Benefits - Maintenance Engineer • Discretionary annual Bonus 7.5%, • up to 5.5% employer contribution, • EV Scheme: through salary sacrifice and free charging at site, • Medical Insurance, • Death in Service: 4 x annual salary For more information on this role, please contact Andy Haddon on 01453 796617, or send a copy of your CV to For details of other opportunities available within your chosen field, please visit ___ Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include: Maintenance Engineer, Shift Engineer, Shift Technician, Reliability Engineer or field service engineer

Electronic Design Support Engineer Salary: Circa £50,000–£55,000 depending on experience Location: Bolton – primarily on-site with occasional homeworking Develop new and innovative electronic solutions to address complex customer requirements in the defence sector. You will be well-rewarded at this established defence company that produces military weapons systems with bonuses, annual salary reviews, paid overtime and so forth. About the Role: • Act as a design team representative to interface with the design and manufacturing teams to transition the product from the development phase into series manufacture., • Work with manufacturing on process and capability issues and support continuous improvement initiatives to maximise production yields, • Support non-conformance management, dealing with design queries, • Support obsolescence management by providing recommendations to the design team Requirements: • Strong Electronic Engineer with a background in RF engineering, • Detailed knowledge of RF assembly and test procedures would be advantageous, • Ability to investigate and resolve production problems, • Multidisciplinary team experience, working with both the design and manufacturing teams, supporting project changes efficiently and maintaining the production schedule, • British Citizen eligible for high-level security clearance Why this role? • Exciting opportunity to work at the forefront of technological innovation, • Supportive work environment with a clear path for development and progression, • Financial benefits, such as paid overtime and annual bonuses, • Flexible working arrangements and 25 days holiday plus bank holidays, • Excellent site facilities, including subsidised meals, free parking, etc. Due to the nature of work undertaken at our client's site, incumbents of these positions are required to meet special nationality rules and therefore these vacancies are only open to sole British Citizens. Applicants who meet this criterion will also be required to undergo security clearance vetting, if not already security cleared to a minimum SC level. Electus Recruitment Solutions provides specialist engineering and technical recruitment solutions to a number of high technology industries. We thank you for your interest in this vacancy. If you don't hear from us within 7 working days, please presume your application has been unsuccessful on this occasion. This is a permanent position.

MERITUS are recruiting for a Mechanical Engineer to join our client within the defence space in Bolton on an initial 12 month contract, PLEASE NOTE: You MUST have a HNC and be able to evidence it at application stage to be considered for the role. MECHANICAL ENGINEER - INSIDE IR35 - £35 PER HOUR - 12 MONTHS - UNDERGO SC - BOLTON, ONSITE - MUST HAVE HNC - SINGLE STAGE INTERVIEW PROCESS An opportunity has arisen for a Mechanical Engineer to join a Calibration & Maintenance team within a high-precision manufacturing environment. The role offers a varied and technically challenging workload, supporting production across all stages of assembly, integration, and testing. You will be part of a proactive and collaborative team, working closely with engineering and support functions to resolve both routine and complex technical issues within the business. Key Responsibilities: * Provide technical support to the metrology function, covering both commercial off-the-shelf equipment and bespoke test systems. * Support calibration and maintenance activities across a range of mechanical and measurement equipment. * Assist production teams with technical queries relating to fixtures, tooling, and measurement processes. * Contribute to coordinate measuring machine (CMM) inspection activities, including program creation and operation.

Production Manager and another Quality Inspector, while also having to take initiative and work autonomously to ensure all specifications meet their objectives. Previous experience in Quality or (Mechanical fitting/ Assembly background). Mechanical Fitting & Assembly background to join their expandi

A leading defence organisation in Bolton is seeking an experienced Manufacturing Test Engineer to join their Circuit Card Assembly team. You will be responsible for diagnosing faults on PCB assemblies and collaborating with various engineering teams to improve production.

A leading recruitment agency is looking for Production Operatives in Irlam.This role involves operating production machinery, quality control of trays, and packaging for shipment.Candidates must have at least 6 months of experience in a production environment and be able to handle heavy lifting in a

A leading recruitment company is seeking an Assembly Operator to join their dynamic production team in Bolton. Candidates should have proven experience in assembly and strong attention to detail.

An opportunity has arisen with my client for an Electrical Wiring Operator to join them on a 12-month contract. As an Electrical Wiring Operator you will join the Calibration and Maintenance Team to fault diagnose and repair bespoke cabling to drawing specifications. Role: Electrical Wiring Operator Pay: £28.35 per hour via umbrella (rising to £29.70 per hour after 12 weeks) Location: Bolton Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: BPSS however needs to achieve Security Clerance. Responsibilities: Fault finding and subsequent repair of cable assemblies. Carry out surface mount repair on CCAs. Maintain and repair test/measuring equipment to component level. PAT testing across the manufacturing site. Interrogate drawings during fault finding activities. Safety systems testing of Test & Measuring equipment in line with documented procedures. Provide Technical support to facilitate the efficient servicing of STTE to enable production testing of hardware and repair phases of the contract. Maintain excellent workspace husbandry disciplines. Maintain a high degree of tool control and FOD practices. Assist with maintenance of manufacturing aids as and when required.Skills/Experince All three of the below are required: Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved IPC 620 & Dynamic Cabling certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable.Please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

We are seeking a meticulous Quality Inspector to join an organisation in Bolton. The role requires a detail-oriented professional with experience in the Manufacturing and Production industry to ensure quality standards are met and maintained. Client Details Based in the Bolton area, this long‑established global manufacturer maintains a local presence that supports its wider international network of industrial facilities. The site operates within a broader framework of worldwide locations, reflecting the organisation's extensive footprint across Europe and beyond. The location is part of a network that provides skilled roles and hands‑on work across various technical and operational disciplines. Public job listings highlight activities such as assembly-based tasks, collaboration within trained teams, and work guided by technical drawings and tools - all indicative of a structured, process‑driven environment committed to quality and precision. The facility sits within a local industrial area in Greater Manchester and operates standard weekday hours, aligning with many similar sites across the organisation's global network. Its presence contributes to the region's industrial landscape as part of a broader group recognised internationally for its role in supporting heavy industries and engineered solutions. Overall, the Bolton location serves as a regional link in a global chain - combining local expertise with the scale, heritage, and capabilities of a major international engineering brand. Description As the Quality Inspector you will be tasked with the following; Perform inspections on incoming materials, in-process production, and finished products. Ensure compliance with quality standards and specifications. Document and report inspection findings and non-conformities. Collaborate with the production team to address quality issues. Maintain and calibrate inspection tools and equipment. Support continuous improvement initiatives within the manufacturing process. Assist in the development and implementation of quality control procedures. Ensure adherence to health and safety regulations within the workplace.Profile A successful Quality Inspector should have: Previous experience in the industrial or manufacturing industry. Knowledge of quality control processes and standards. Proficiency in using inspection tools and equipment. Strong attention to detail and analytical skills. Ability to read and interpret technical drawings and specifications. Excellent communication and teamwork skills. A commitment to maintaining a safe working environment.Job Offer £37,266 per annum. Hours of work - 37 per week, explain start & finish times 7am- 3.30pm (Mon - Thur) 7am-1pm (Friday) Holidays - 25 days' annual leave plus 8 bank holidays, reserve 3 for Christmas Bonus - 5% of salary (75% based on Company, 25% on individual) Pension - Standard Life, Defined Contribution scheme. Contribution levels 3%, 4%, 5% with 6%, 8% or 10% from the Company respectively. 7x death-in-service benefit if join the scheme Bupa Private Health Insurance after probationary period If you are ready to take the next step in your career as a Quality Inspector, we encourage you to apply today

Role: Multi-Skilled Maintenance / Warehouse Technician Location: Bolton Type: Permanent Hours: Days, Monday-Friday Salary: Up to £32,000 per annum depending on experience HRGO Recruitment are seeking a Multi-Skilled Maintenance/Warehouse Technician to join a well-established manufacturing business. This hands-on role involves mechanical maintenance for 2 days a week and production and warehouse duties for 3 days a week. It's ideal for someone with strong mechanical skills who enjoys working with tools, machinery, and in a warehouse environment. The role: Maintenance & Fitting: General mechanical maintenance of production equipment Servicing welders, compressors, band saws, fabrication equipment Machine adjustments and basic servicing Maintain welding/grinding extraction systems General building maintenance Production & Warehouse: Assist with assembly, fabrication, and installation of components Drilling, tapping, soldering, and basic fabrication tasks Pack, palletise, label, and load products Goods in/out duties and stock organisationAdditional: Stock control and consumables management Support warehouse stock takes and PAT testing Health & safety compliance and monitoring racking systemsThe candidate: Experience with Pro Spot equipment would be highly advantageous Mechanical maintenance/engineering experience Experience with power tools, workshop equipment, and soldering Previous warehouse/production environment experience Practical, hands-on problem-solving approachFor further information, please contact Sophie on (phone number removed) or email (url removed)

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit a Mechanical Engineer subcontractor on an initial 12-month contract. Hourly Rate: £35ph Overtime Rate: Hours worked over 37 hours per week, are worked at the Overtime rate of time and a quarter. Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Mechanical Engineer Job Description: We are seeking a Mechanical Engineer to join our Calibration & Maintenance Team. The work is extremely varied, interesting and challenging. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across the company to resolve routine and non-routine tasks arising within the business. Responsibilities: The main aspects of the role will be as technical support for the metrology department at Bolton supporting COTS (commercial of the shelf) equipment and STTE (Special to type test equipment) calibration and maintenance. You will be required to assist production with technical queries on fixtures and tooling along with supporting CMM (Co-ordinate measuring machine) inspection work. You will be required to guide operators on best practice within the metrology department on day-to-day technical queries alongside looking at ways to improve process and measurement techniques within the department. You will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations. Skillset/experience required: Minimum qualification: HNC in Mechanical Engineering. Experience and knowledge of calibrating torque tools to ISO 6789-2:2017 required. Good knowledge of Geometric Dimensioning & Tolerancing (GD&T) required. Experience and knowledge in dimensional calibration required Experience and knowledge of using and creating programs for coordinate measuring machine required. Good knowledge of temperature and pressure calibration desirable Able to deal with multiple issues, tasks and priorities concurrently

An exciting opportunity for an experienced Manufacturing Test Engineer to join our Circuit card assembly Engineering team. This is a fast-paced but friendly and inclusive Manufacturing environment that will challenge you Salary: Circa £45,500 depending on experience Dynamic (hybrid) working: 4 or 5 days per week on-site due to workload classification Security Clearance: British National Only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As part of our continued growth, we are looking for a highly skilled and methodical Electronics Manufacturing Test Engineer to join our Circuit Card Assembly team. In this critical role, you will specialise in diagnosing faults on PCB assemblies down to component level. Your expertise will be crucial in accurately identifying root causes of failure, providing technical reports and supporting the implementation of corrective actions, which in turn will be utilised to improve production yield and ensure programme targets are achieved. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to time served experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. Key Responsibilities: Technical Root Cause Analysis:Performing fault diagnosis down to component level on analogue and digital PCB assemblies using a wide range of both automated and manual test equipment including oscilloscopes, multi-meters, signal generators, etc. Test Specification/Instruction Generation:Supporting the introduction of new test facilities by generating test specifications, operator instructions, and maintaining appropriate configuration control. Cross-Functional Collaboration:Serving as a key point of contact, collaborating closely with Manufacturing, Quality, Process, Design Engineers, and other stakeholders to overcome technical challenges and drive product improvements. Design & Development Support:Providing crucial Test Engineering input during the design and development phases, from initial concept through to Production Readiness Reviews.What we're looking for from you: Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 AND Formal further education certificate to Level 4 (HNC or equivalent in a relevant subject)OR BEng/BSc in relevant Engineering/Technical Degree Expertise in Electronics Test & Diagnosis:A strong theoretical and practical understanding of electrical/electronic measurement and test principles, test equipment and fault diagnosis techniques for electronic sub-assemblies and PCBs. Engineering Documentation Experience: An ability to interpret detailed schematics, drawings and test related documentation. Test Equipment Experience:Hands-on experience using both manual and automated test equipment, preferably within a defence or similar high-reliability manufacturing environment. Manufacturing Systems Proficiency:Familiarity with enterprise resource planning, manufacturing execution and version control system tools (e.g., SAP, MES, PLM) for logging test activities and generating non-conformance quality reports. Desirable Experience working with RF-based circuitry would be preferable, but is not mandatory.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Job Title: Production Operative Location: Farnworth, Bolton, BL4 0AN Salary: Starting at £12.71 per hour (rising with experience) Job Type: Full time, Permanent Working Hours: 07:30 to 16:00 Monday to Thursday 07:30 to 12:50 Friday (38 hours per week) About Us: As one of the UK's leading heating element manufacturers, Backer Heatrod offer a wide range of products from standard straight elements through to customer bespoke equipment. Our success is built on our ability to satisfy our customers by providing quality products, outstanding customer service and delivering on time every time! We combine a growing industrial manufacturing base with a thriving distribution business. About the Role: We are seeking a reliable and hardworking Production Operative to join our manufacturing team specializing in the production of heating elements. This is a hands-on role in a fast-paced environment where precision and quality are key. You'll be part of a dedicated team assembling components into finished units used in a wide range of heating applications. It's essential that you have experience in a manufacturing environment assembling parts into finished units. Key Responsibilities: Following our standard operating procedures, assemble components following technical drawings and specifications Work alongside the team in ensuring that production plan is met on a daily/weekly and monthly basis Conduct inline quality checks through the process to ensure products meet required standards Maintain a clean and safe working environment Report any faults or issues to our technicians/production manager Follow health and safety procedures at all timesWhat We're Looking for: Experience in a manufacturing environment Good attention to detail and manual dexterity Demonstrable experience reading engineering drawings and measuring equipment Ability to follow instructions and work as part of a team Willingness to learn and take on new tasks Good IT skills Basic understanding of health and safety practicesBenefits: 25 days holiday plus bank holidays Pension scheme Cash Health Plan Cycle to work scheme Company life assurance Full training and support Opportunities for career progression Friendly and inclusive working environment On-site parkingPlease Note: No agencies. Please click the APPLY button to send your CV and Cover Letter for this role. Candidates with the relevant experience or job titles of: Manufacturing Operative, Manufacturing Engineer, Assembly Technician, Production Operative, Production Technician, Process Operator, Production Engineer, Assembly Operative, Assembly Line Operator, Process Operative, Manufacturing Operator, Production Operator, Production Coordinator may all be considered

Our client, a trusted partner of the UK's Ministry of Defence, is seeking an experienced Manufacturing Engineer with expertise in Assembly and Integration, particularly in circuit card assemblies. Based within the unit and missile assembly manufacturing facility, you will play a key role in ensuring products are built efficiently, on time, and within budget. As a vital member of the Manufacturing Engineering team, you will provide support across multiple projects, contributing to the successful delivery of high-quality manufacturing solutions. Key Responsibilities: Prepare and maintain detailed Manufacturing Instructions to ensure accuracy and clarity. Design, commission, and validate the necessary tooling for production processes. Support industrial validation activities, including FMEA and First Article Inspection (FAI). Diagnose and resolve technical issues encountered during manufacturing. Update route cards to reflect changes resulting from rework activities. Manage configuration control by incorporating design modifications into manufacturing documentation. Assist with the Non-Conformance process, utilising SAP for tracking and resolution. What do you need?: Qualification Requirements: Electrical/Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard"or" Electrical/Mechanical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.)"and" Electrical/Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved (These qualifications must meet the standard to be considered for the role). "or" BEng Degree in a relevant Engineering subject. Skill Requirements: Ability to interpret design drawings and produce precise Manufacturing Build Instructions for both skilled and semi-skilled operators. Proven experience in electronic sub-assembly manufacturing through to full system builds. Knowledge and hands-on experience of assembly processes for small or miniature electro-mechanical actuation systems. Strong team player with the ability to collaborate and contribute effectively within a group environment. Ability to understand and respond to customer requirements. Familiarity with and adherence to company processes and procedures. Excellent communication skills, capable of engaging effectively within the team and across various organisational levels. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy

Job Title: Aluminium TIG Welder / Fabricator Location: Westhoughton, Bolton Job Overview We are looking for a skilled and reliable Aluminium TIG Welder / Fabricator to join our growing manufacturing team. The successful candidate will be responsible for welding and fabricating components used in roofing and cladding systems, ensuring all work is completed to a high standard of quality and accuracy. This role requires experience working with aluminium and mild steel, along with the ability to read and interpret fabrication drawings to produce parts and assemblies to specification. Working Hours Monday to Friday: 6:00am – 2:30pm Overtime regularly available Overtime Rates Time and one third after 40 hours Double time on Sundays (hours depending) Key Responsibilities Perform TIG welding on aluminium components to a high standard Fabricate parts and assemblies based on engineering / fabrication drawings Work with aluminium and mild steel materials Cut, shape, and assemble metal components using fabrication equipment Ensure all work meets quality and safety standards Carry out basic inspections of welded components Maintain a clean and safe working environment Work effectively as part of the production team to meet deadlines Requirements Proven experience as a TIG welder, particularly with aluminium Experience working with mild steel Ability to read and understand fabrication / engineering drawings Good attention to detail and quality standards Ability to work independently and as part of a team Reliable with a strong work ethic Desirable (but not essential) Previous experience in roofing, cladding, or sheet metal manufacturing Fabrication and assembly experience Welding qualifications or certifications What We Offer Competitive pay (depending on experience) Plenty of overtime opportunities Structured working hours Stable work within a growing manufacturing company Supportive team environment

Important: All applicants must be able to obtain Security Clearance and must hold British Nationality as their sole nationality. Working: The role offers flexible & hybrid working. It would be beneficial to be on-site 2-3 days a week, depending on the project needs and working remotely other days. • An opportunity exists for an Electronic Engineer with broad based skills, including a strong background in RF engineering, to take a key role in the design support team in the manufacturing facility. - The Design Support Engineer designs and develops state of the art RF and Dual Mode (RF and IR). The role requires a high degree of enthusiasm and a determination to work autonomously to support the delivery of products to the right standard and within the required timescales. - The Design Support Engineer is factory based and will assists with a variety of different projects. The Design Support Team interfaces with both the design team & manufacturing teams, to help with highly technical problem solving. There are also strong relationships with external suppliers who provide sub-assemblies. - Role Requirements; Acting as a design team representative to interface with the design and manufacturing teams to transition from the development phase into series manufacture. Work with manufacturing on process and capability issues & support continuous improvement initiatives to maximise production yields. Support non-conformance management, dealing with design queries and advising on non-conformances where appropriate. Support manufacturing with internal and external suppliers. to aid the manufacturing team & ensure continuity of supply. Support obsolescence management by providing recommendations to the design team. - Skill and Experience; We are looking for an Electronic Engineer with the initiative and the determination to investigate and resolve production problems. A broad-based engineering background would be essential to the role, and a detailed knowledge of RF assembly and test procedures would be advantageous. The successful applicant will be able to manage their own workload, interact well with both the design and manufacturing teams, work on project changes in a timely manner & maintain the production schedule. - Desirable Experience; Experience in the Defence or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. - Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. - Company Benefits; Bonus: Up to £2,500 (based on performance). Pension: Up to 14% total contribution. Parental Leave: Enhanced parental, maternity, and shared parental leave. Flexi Leave: Up to 15 additional days. Facilities: On-site perks like subsidised meals and free parking. Training and Development: Excellent opportunities for career progression and skill development • Company Details; The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! "Interesting work. Good work-life balance. Employees made to feel valued." Software Engineer, 5 Dec 2022. *Glassdoor review. "Promotes and believes in a good work/life balance interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities" Principal Systems Engineer, 19 Dec 2022. *Glassdoor review. True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking groups and communities across the business advocating Equity, Diversity and Inclusion. Enhanced parental leave: Offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. - For full information, please get in touch

Production Operative – Radcliffe. Our client is a well-established company who specialise in manufacturing Industrial Measurement products. They place a strong emphasis on providing the very best level of quality. The internal full time, salaried, position offers an excellent opportunity for long term career progression and the role includes the following aspects: 1. Mechanical manufacturing techniques using hand tools, tig, plasma and discharge welders, drills, lathes, pipe threading, grinders, polishers, tube cutting and sand blasting equipment. (Training given), 2. Electronic sub-assembly techniques of sensor elements, thermocouple and wiring looms using discharge welding, soft and silver soldering, gluing and crimping techniques and shrinking of insulation and ID tags. In Line and end of line testing of sensors is required at every stage of the production process., 3. Machine cutting, coiling and wire preparation of sensor cables, sub assembly of sensor plugs, sockets, connecting heads, cables and heat shrinking of ID tags. Full on-going In-house training will be provided by mentors and / or supervisors for the right candidate. Applicants must have some manufacturing/ hands on experience. The Candidate: The candidate must be self-motivated and have either a minimum of 5 grade C or better GCSE qualifications including Maths & English or have a 12 month working history which demonstrates relevant skills to similar production / assembly environment. The candidate must have strong communication skills, have a practical ‘hands on’ aptitude and demonstrate a desire for manufacturing and a willingness to listen, learn and apply themselves on a daily basis. A “can do” attitude and an ability to work to tight time scales, producing quality parts is essential. Working Hours: Monday to Friday: 08.00 – 16.30 Please apply with your CV in the first instance

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Wiring Operator on an initial 12 month contract and then ongoing and long-term thereafter. Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £28.35ph for the first 12 weeks and then £29.70 after week 12 (Umbrella). Overtime Rates of 'time and a half' for all hours worked over 37 hours per week. Electrical Wiring Operator Job Description: An exciting opportunity for a Skilled Electrical Wiring Operator to join our Calibration and Maintenance team for a 12-month period in a fast-paced but friendly and inclusive Manufacturing environment. We are seeking a Skilled Wire Operator to join our Calibration & Maintenance Team, to fault diagnose and repair bespoke cabling to drawing specifications. Fault finding and subsequent repair of cable assemblies. Carry out surface mount repair on CCAs. Maintain and repair test/measuring equipment to component level. PAT testing across the manufacturing site. Interrogate drawings during fault finding activities. Safety systems testing of Test & Measuring equipment in line with documented procedures. Provide Technical support to facilitate the efficient servicing of STTE to enable production testing of hardware and repair phases of the contract. Maintain excellent workspace husbandry disciplines. Maintain a high degree of tool control and FOD practices. Assist with maintenance of manufacturing aids as and when required. What we're looking for from you: All three of the below are required: Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved IPC 620 & Dynamic Cabling certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable

Maintenance Engineer Bolton 3 Shift Pattern £48,000 + Bonus A leading global automotive supplier specialising in advanced vehicle components and systems for major OEMs worldwide. Join a world-class team driving the future of automotive manufacturing We are a premier Tier 1 automotive supplier with a strong presence in the UK, delivering innovative, high-quality components to the world's leading vehicle manufacturers. Our Bolton facility is a key high-volume production site focused on precision assembly and testing systems, and we are now seeking an experienced Maintenance Engineer to join our dynamic engineering team. This is a hands-on role ideal for a proactive, skilled tradesperson who thrives in a fast-paced, high-output manufacturing environment. You will play a critical role in maximising equipment uptime, driving continuous improvement, and supporting our commitment to world-class production standards. Responsibilities – Maintenance Engineer Troubleshooting, repair, and maintenance of high-volume PLC-controlled production equipment Planning and performing preventative maintenance on critical assets Improvement and modification of assembly/test equipment and transfer systems Service and maintenance of electrical and mechanical site services/plant Supporting the installation and commissioning of new equipment Experience/Qualifications - Maintenance Engineer Ideally qualified to ONC/HNC level (or equivalent) in Mechanical/Electrical Engineering, supported by City & Guilds Part 3 (or similar) and NVQ Level 2 & 3 Time-served apprenticeship in a relevant engineering discipline Significant hands-on experience (minimum 2+ years) in high-volume manufacturing environments Proven track record in equipment repair, maintenance, and process improvement Experience in fitting, fabrication, and machining is highly advantageous Strong background in maintenance and fault-finding on PLC-controlled and robotic high-volume equipment (ideal but not essential) Solid experience maintaining and diagnosing faults in hydraulic and pneumatic systems Benefits - Maintenance Engineer Discretionary annual Bonus 7.5% up to 5.5% employer contribution EV Scheme: through salary sacrifice and free charging at site Medical Insurance Death in Service: 4 x annual salary For more information on this role, please contact Andy Haddon on (phone number removed), or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field, please visit Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include: Maintenance Engineer, Shift Engineer, Shift Technician, Reliability Engineer or field service engineer Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors

MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. Salary:Up to £57,000 dependent on experience + bonus + benefits What we can offer you: Company bonus of up to £2,500 (based on company performance and will vary year to year) Pension of maximum total (employer and employee) contribution of up to 14% Paid overtime Up to 15 days flexi leave 25 days annual leave (plus holiday purchase) Possible relocation available Fantastic site facilities, including subsidised meals, free car parking and more Excellent career progression and development opportunitiesHybrid working pattern: Primarily office based (Bolton) with some opportunity for homeworking Want to be part of a successful team working to develop new and innovative seeker solutions to address complex customer requirements? Then keep reading .... The opportunity: An opportunity exists for a Electronic Engineer with broad based skills, including a strong background in RF engineering, to take a key role in the design support of seeker products being produced in our manufacturing facility based at Bolton. The Seeker Division designs and develops state of the art RF and Dual Mode (RF and IR) seekers for use in guided missile programmes. The role requires a high degree of enthusiasm and a determination to work autonomously to support the delivery of products to the right standard and within the required timescales. The role: Acting as a design team representative to interface with the design and manufacturing teams to transition a seeker from the development phase into series manufacture. Work with manufacturing on process and capability issues & support continuous improvement initiatives to maximise production yields. Support non-conformance management, dealing with design queries and advising on non-conformances where appropriate. Support manufacturing with internal and external suppliers. to aide the manufacturing team & ensure continuity of supply. Support obsolescence management by providing recommendations to the design team.What we're looking for from you: We are looking for an Electronic Engineer with the initiative and the determination to investigate and resolve production problems. A broad-based engineering background would be essential to the role and a detailed knowledge of RF assembly and test procedures would be advantageous. The successful applicant will be able to manage their own workload, interact well with both the design and manufacturing teams, work on project changes in a timely manner & maintain the production schedule. The team: The factory based Design Support Team assists with a variety of different seeker projects - no two working days will be the same! The Design Support Team interfaces with both the Stevenage design team & Bolton manufacturing teams, to help with highly technical problem solving. There are also strong relationships with external suppliers who provide sub-assemblies into the seeker build.Our Business: We respect new perspectives and experiences, and we value our collaborative ways of working. We are committed to growing and supporting diversity in our workforce and ensuring everyone has an equal opportunity to reach their potential. We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. We also welcome applicants who are looking for flexible working arrangements. Follow us on LinkedIn (MBDA), Twitter (@MBDAcareers), Instagram (lifeatMBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. Please Note: MBDA UK Limited requires all employees to achieve the required medical and national security clearance for their role. Further restrictions and/or limitations relating to nationality and/or rights to work may also apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. Due to the nature of our business, this particular vacancy requires the applicant as a minimum to be a British Citizen or a Dual UK national with British citizenship and capable of achieving the clearance levels mentioned above. #LI-SF1

Quality Inspector - Machined Parts Heywood, Manchester Salary: £34,042 plus working out allowance; Weekday = £71.17 Saturday = £234.46 Sunday = £279.08 Department: Production Reports to: Production Manager Are you a detail‑driven engineering professional with a passion for precision? Our client, a leading manufacturer of highly complex machinery, is expanding their production team and looking for an experienced Machine Quality Inspector to join their busy department. This is an excellent opportunity for someone who thrives in a hands‑on engineering environment and enjoys ensuring the highest standards of quality. The Role Working within a fast‑paced production area alongside Mechanical & Electrical Fitters, Test Engineers and Goods‑In personne - you will play a key part in maintaining exceptional quality throughout the build process. You'll be responsible for the inspection and testing of components prior to assembly, ensuring every part meets strict engineering and performance standards. ⭐ Key Responsibilities Quality & Inspection Inspect critically dimensioned parts and conduct vacuum integrity tests on sub‑assemblies. Confirm quality standards and verify components against specification. Inspect machined components where required. Carry out vacuum and pressure testing. Complete accurate inspection reports and document any deviations. Supplier & Internal Liaison Work closely with Purchasing and Engineering to align rejection recommendations. Maintain effective communication with suppliers. Ensure all paperwork and follow‑up actions are completed correctly. Process & Development Maintain and improve inspection procedures. Contribute to continuous improvement initiatives. Support the team with innovation and development ideas. Skills & Experience Required Technical Skills Strong ability to read and interpret engineering drawings. Use of micrometers, calipers, gauges, indicators and other inspection equipment. Experience with surface measurement equipment, finish testing and chrome thickness checks. Experience using or willingness to train on CMM/FARO arm equipment. Competence in completing inspection documentation and maintaining accurate records. Computer literate, including Microsoft Office. Personal Attributes Excellent attention to detail and quality focus. Strong organisational skills and ability to prioritise workload. Self‑motivated, proactive and able to work unsupervised. Effective communicator with strong problem‑solving ability. Flexible, adaptable and a supportive team player. Willingness to work overtime when required and travel worldwide approx. 4 times per year. Beneficial Experience Working with vacuum systems and capital machinery. Knowledge of pneumatic, hydraulic and mechanical systems. Crane operation (or willingness to be trained). Education Time‑served engineering apprenticeship, preferably with a mechanical bias.Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website

Job Title: Manufacturing Operative Location: Bolton (BL3) Pay: £12.21 per hour Hours: 37.5 per week Working Schedule: Mon - Thu: 8:00 AM - 5:00 PM Fri: 8:00 AM - 1:00 PM About the Role We are looking to recruit new team members to join our manufacturing department. This is an excellent opportunity for individuals with a strong background in manufacturing and an eye for detail. Key Responsibilities Assembly and production of wiring looms, cable assemblies, and related components. Working from technical drawings and specifications. Performing quality checks to ensure compliance with customer requirements. Maintaining a clean and safe working environment. Adhering to health and safety guidelines at all times. Essential Requirements Previous experience working in a manufacturing or assembly environment. Ability to work accurately and efficiently in a fast-paced setting. Good attention to detail and manual dexterity. Desirable Experience in soldering or similar precision work. Familiarity with electrical components and wiring

Production Operative Location: Salford ⏰ Hours: Monday – Thursday 6:00am – 2:30pm / Friday 6am – 11:30am Pay: £14.88 per hour (rising to £15.40 after 12 weeks) Contract: Long-Term Temporary with Permanent Opportunity We are currently recruiting for a Production Operative to join a well-established manufacturing company based in Salford. This Production Operative role offers a long-term opportunity with the potential to become permanent for the right candidate. As a Production Operative, you will play a key role in the manufacture and assembly of protective covers for precision scales. These covers help protect sensitive equipment from spills, damage, and contamination while ensuring accuracy and reliability. Key Responsibilities: Assembly and finishing of protective covers within a manufacturing / workshop environment Using a variety of hand tools and workshop equipment, including: Routers Heat guns Stanley knives Scrapers General hand tools Supporting plastic welding or heat welding processes where required Working to detailed specifications and high-quality standards Carrying out quality checks on finished products Following health & safety procedures at all times Maintaining a clean and organised workstationRequirements: Previous experience in a production, manufacturing, assembly, or workshop environment Confident using hand tools and practical equipment Good hand-eye coordination Strong attention to detail and quality focus Reliable, hardworking, and able to work well as part of a teamDesirable Experience (Not Essential) Experience with welding, plastic welding, or heat welding techniques Background in fabrication, joinery, construction, assembly, or manufacturing rolesThis Production Operative position is a great opportunity to join a growing company offering stable hours, competitive pay, and the chance to secure a permanent role. Interested? Apply now Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Business for this vacancy

Bolton | Up to £57,000 + Bonus + Overtime + Benefits | Hybrid Working Great engineers don’t just design technology. They solve problems that can stop production lines, and this is one of those roles. A global advanced technology organisation is looking for an Electronic Engineer with strong RF knowledge to join a highly capable engineering team supporting the transition of complex electronic systems from development into production. This is hands-on, high-impact engineering. You will work at the critical intersection of design and manufacturing, solving technical challenges, improving production capability and ensuring sophisticated electronic systems are delivered on time and to a very high / safety critical standard. What You will Be Doing • Acting as the engineering interface between design and manufacturing teams, • Supporting the transition of complex electronic products from development into series production, • Solving production and capability challenges to maximise manufacturing yield, • Managing technical queries and supporting non-conformance resolution, • Working closely with internal teams and external suppliers to maintain production continuity, • Supporting component lifecycle and obsolescence management What We’re Looking For • You will be an Electronic Engineer who likes to get stuck in, and will likely bring:, • A broad electronic engineering background, • Strong knowledge of RF engineering, • Experience with electronic assembly and test environments, • The initiative to investigate issues and drive solutions, • Confidence working with both engineering and production teams If you enjoy solving technical problems and keeping complex engineering programmes moving forward, then you will fit right in. What’s On Offer • Salary up to £57,000 depending on experience, • Company bonus up to £2,500, • Pension contributions up to 14%, • Paid overtime, • Up to 15 days flexi leave, • 25 days holiday plus the option to buy more, • Excellent career progression opportunities, • Subsidised meals, free parking and great on-site facilities If you’re an engineer who enjoys fixing real problems and keeping advanced technology moving, this is worth a conversation. You will need to be a British citizen, or dual national with British Citizenship, and eligible for UK security clearance. Cirrus Selection — specialist recruiters to the engineering and technology sectors, offers the services of an Employment Agency for permanent recruitment and the services of an Employment Business for contract recruitment

Electronics Operative Location: Salford ⏰ Hours: Monday – Thursday 6:00am – 2:30pm / Friday 6am – 11:30am Pay: £14.88 per hour (rising to £15.40 after 12 weeks) Contract: Long-Term Temporary (Permanent Opportunity for the Right Candidate) Are you a hands-on individual with a strong background in manufacturing or engineering? Do you have a keen eye for detail and experience in soldering and electronics assembly? We are currently recruiting an Electronics Operative to join our client’s team! Key Responsibilities: Perform “hands-on” operational tasks to maintain and build core technical skills. Apply your experience in soldering and electronics assembly to deliver consistent product quality. Promote and actively engage in continuous improvement initiatives and lean manufacturing techniques. Assist in developing the team’s knowledge and skills; support training of new and existing colleagues. Meet daily production and standard work requirements efficiently and accurately. Take part in change initiatives, supporting company targets for improvement and productivity. Remain flexible to work and train across different areas of the business as needed. Be adaptable and open to change in a fast-paced, evolving environment.Required Skills & Experience: Previous experience in a manufacturing or engineering environment is essential. Proven experience with soldering and electronics handling. Understanding of lean manufacturing principles and standardised work processes. Strong attention to detail and commitment to quality. A proactive mindset with a passion for continuous improvement. Good communication and teamworking skills.This is a long-term role with the opportunity to secure a permanent position for candidates who demonstrate the right skills and attitude. Interested? Apply now Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Business for this vacancy

Our client, a trusted partner of the UK Ministry of Defence, is looking for a detail-focused General Operator to join their cutting-edge manufacturing team. This role is ideal for candidates with experience in microelectronics assembly, particularly those confident working under a microscope with extremely small components. You'll be part of a high-performing team supporting the production of advanced missile systems, with a focus on precision soldering and assembly of circuit card components. If you have a steady hand, a sharp eye, and thrive in a cleanroom-style environment-this is for you. Key Responsibilities: Assembling and soldering microelectronic components under a microscope Following detailed manufacturing instructions and quality standards Supporting sub-assembly and certification processes Working across departments including PEC/CCA, looming, plastics, and stores Ensuring compliance with health & safety and ESD protocols Tentatively work across several departments, these might include: Looming: binding wire looming is a cable assembly that efficiently distributes electrical signals by linking cables together using a crimping tool. (Ex; wiring, root wiring, soldering and fibre optics cabling), PEC and CCA Assembly Microelectronics Plastics Department (Ex; applying glues, cutting out intricate patterns, and moulding). Manufacturing Controller/Stores What do you need?: Proven experience in microelectronics or fine-pitch soldering Comfortable working under a microscope for extended periods Strong manual dexterity and attention to detail Ability to read and follow technical layouts and instructions IPC 610 certification (preferred) ESD training (essential) Basic PC and Microsoft Office skills Experience with crimping tools and small-scale assembly Additional skills: Experience utilising a soldering iron and working with manufacturing micro-components Experience using a microscope/magnifying glass What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy

World Class Defence Organisation based in Bolton is currently looking to recruit 2x General Operative’s with very strong Soldering experience an initial 12 month contract. This position will specifically require experience with strong soldering or Circuit Card Assembly (CCA) or PCB Assembly experience. Any prior microelectronics experience would be great, i.e. soldering under a microscope. You will also need experience working within a manufacturing environment. Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph. Overtime hours (over 37 hours) are at normal hourly rate plus 50% Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Job Spec: The General Operator will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Carry out detailed standard assembly / manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements and timescales. Very good Soldering experience is required Any experience of soldering under a microscope or in a similar environment would be great Any Looming or PCB experience would be great Previous background of working in a Production Technician or Assembly Operative role would be great Contribute to the efficient movement of work and information in the manufacturing area. Adhere in all activities to agreed standards and behaviours. Comply with all health and safety requirements. IPC 610 certified / trained preferred. Dexterity for fine work. Read and interpret layouts. Follow instructions. Willing to work flexible shift patterns. Attention to detail. Work on own with minimal supervision. Flexible. ESD training. Desirable skills: PC literate. Colophony health surveillance

Are you looking to move in to engineering? we are happy to take people with good work historys and excellent references for this role. Production Operative – Radcliffe. Our client is a well-established company who specialise in manufacturing Industrial Measurement products. They place a strong emphasis on providing the very best level of quality. The internal full time, salaried, position offers an excellent opportunity for long term career progression and the role includes the following aspects: 1. Mechanical manufacturing techniques using hand tools, tig, plasma and discharge welders, drills, lathes, pipe threading, grinders, polishers, tube cutting and sand blasting equipment. (Training given) 2. Electronic sub-assembly techniques of sensor elements, thermocouple and wiring looms using discharge welding, soft and silver soldering, gluing and crimping techniques and shrinking of insulation and ID tags. In Line and end of line testing of sensors is required at every stage of the production process. 3. Machine cutting, coiling and wire preparation of sensor cables, sub assembly of sensor plugs, sockets, connecting heads, cables and heat shrinking of ID tags. Full on-going In-house training will be provided by mentors and / or supervisors for the right candidate. Applicants must have some manufacturing/ hands on experience. The Candidate: The candidate must be self-motivated and have either a minimum of 5 grade C or better GCSE qualifications including Maths & English or have a 12 month working history which demonstrates relevant skills to similar production / assembly environment. The candidate must have strong communication skills, have a practical ‘hands on’ aptitude and demonstrate a desire for manufacturing and a willingness to listen, learn and apply themselves on a daily basis. A “can do” attitude and an ability to work to tight time scales, producing quality parts is essential. Working Hours: Monday to Friday: 08.00 – 16.30 Please apply with your CV in the first instance

Job Title: Assembly Operator Location: Bolton About: Our client is a leading company in their industry. They pride themselves on innovation, quality, and a commitment to excellence in everything they do. As an Assembly Operator, you will be an integral part of our dynamic production team, contributing directly to the success of our operations. Key Responsibilities: Read and interpret technical drawings, schematics, and work instructions. Perform wiring, cable work, crimping, and soldering operations with precision and accuracy. Inspect and test assembled components to ensure they meet quality standards. Troubleshoot and resolve minor assembly issues. Maintain a clean and organised work area, always adhering to safety protocols. Collaborate with team members to achieve production targets and deadlines. Qualifications: Proven experience in assembly operations, with a focus on wiring, cable work, crimping, and soldering. Familiarity with reading technical drawings and schematics. Proficiency in using a variety of hand tools and equipment related to assembly operations. Strong attention to detail and a commitment to producing high-quality work. Ability to work efficiently in a fast-paced, team-oriented environment. Excellent problem-solving skills and a proactive approach to troubleshooting. Working hours - Monday to Thursday 08:00 - 17:00 and Friday 08:00 - 13:00 Rate of pay: £12.21 per hour. Please note this position will become permanent after a successful qualifying period. How to Apply: Please submit your CV to or call (phone number removed) for more information

World Class Defence Organisation based in Bolton is currently looking to recruit a General Operative (Microelectronics / Soldering) on an initial 12 month contract. This position will specifically require experience with strong soldering experience. Any prior microelectronics experience would be great, i.e. soldering under a microscope. You will also need experience working within a manufacturing environment. There are 3 positions working on standard days and 1 position working nights. Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph. Overtime hours (over 37 hours) are at normal hourly rate plus 50% Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Job Spec: The General Operator will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Carry out detailed standard assembly / manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements and timescales. Very good Soldering experience is required Any experience of soldering under a microscope or in a similar environment would be great Any Looming or PCB experience would be great Previous background of working in a Production Technician or Assembly Operative role would be great Contribute to the efficient movement of work and information in the manufacturing area. Adhere in all activities to agreed standards and behaviours. Comply with all health and safety requirements. IPC 610 certified / trained preferred. Dexterity for fine work. Read and interpret layouts. Follow instructions. Willing to work flexible shift patterns. Attention to detail. Work on own with minimal supervision. Flexible. ESD training. Desirable skills: PC literate. Colophony health surveillance

Our client has an opportunity for a Mechanical Engineer to join their Calibration and Maintenance Team. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. Role: Mechanical Engineer Location: Bolton, fully onsite Hours: 37 per week Hourly Rate: £32-£35 per hour via Umbrella, inside IR35 Clearance: SC required before starting What you'll be doing: The main aspects of the role will be as technical support for the metrology department supporting COTS (commercial of the shelf) equipment and STTE (Special to type test equipment) calibration and maintenance. You will be required to assist production with technical queries on fixtures and tooling along with supporting CMM (Co-ordinate measuring machine) inspection work. You will be required to guide operators on best practice within the metrology department on day-to-day technical queries alongside looking at ways to improve process and measurement techniques within the department. You will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations. Requirements: Minimum qualification: HNC in Mechanical Engineering. Experience and knowledge of calibrating torque tools to ISO 6789-2:2017 required. Good knowledge of Geometric Dimensioning & Tolerancing (GD&T) required. Experience and knowledge in dimensional calibration required Experience and knowledge of using and creating programs for coordinate measuring machine required. Good knowledge of temperature and pressure calibration desirable Able to deal with multiple issues, tasks and priorities concurrently.If you are interested in applying for this position and you meet the requirements, please apply immediately! Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. "Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

As part of this exciting growth, they're looking to recruit a Production/Assembly Technician to join their friendly and supportive team. Assembly - Carrying out detailed, intricate assembly work, including gluing and sticking small components, requiring precision and good attention to detail. Previo

A leading recruitment agency is seeking experienced Production Operatives for a growing manufacturing business in Ashton-under-Lyne. Roles available in SMT and Assembly departments with pay rates starting from £12.

A technical recruitment agency is seeking an experienced Assembly Technician to support operations in the aerospace sector.

Production Operative – Final Assembly. Experience in a Manufacturing/Production Environment and electrical knowledge or previous assembly experience would be a distinct advantage but not essential as full training can be given to the right applicant. CARBOLITE GERO makes a significant contribution

A growing UK manufacturing company is seeking a Production Operative for a hands-on role in Waverley, Surrey, offering £14 per hour on a temporary contract.

A recruitment agency is seeking several Production, Manufacturing & Factory Operatives for an immediate start in Rochdale. The role involves bonding, sanding, and prepping materials among other general production tasks.

My client is looking for ongoing Assembly staff, with good hand dexterity and attention to detail for immediate start.

A leading recruitment agency in the United Kingdom is seeking a dedicated Production Operator to join their manufacturing team. The role involves operating equipment, maintaining production workflow, and adhering to safety standards.

Candidates should have experience in assembly operations and lean manufacturing principles.

A leading water solutions company in West Lancashire is seeking a Production Operative to work in our busy factory.

Ideal candidates will have experience in managing production environments, knowledge of CAA regulations, and a commitment to continuous improvement. A leading engineering firm in Staverton is seeking an experienced Production Manager to oversee manufacturing operations.

A manufacturing company based in Dukinfield is seeking a Production Operative/Team Leader. This full-time role offers £27,040 per year in a dynamic production environment with opportunities for career progression. Candidates should have prior production experience, be detail-oriented, and capable o

A leading recruitment agency is seeking an experienced Production Operative for a client in the UK. Candidates should have experience in a fast-paced production environment and knowledge of Health and Safety practices.

Candidates should have previous experience in production, strong attention to detail, and the ability to meet production targets. A recruitment agency is seeking a Production Operative to join a busy manufacturing team in the United Kingdom.

A leading recruitment agency in the UK seeks Assembly Operatives for a busy factory in Warrington. Ideal candidates have experience using hand and power tools and are comfortable working to production targets.

A leading manufacturer in the UK is seeking a Production Fitter to join their assembly team in Worksop. Candidates should have prior experience working in a production or manufacturing environment.