Production assembly jobs in WhitefieldCreate job alerts

Are you experienced in fine pitch soldering or microelectronics assembly? Do you enjoy precision work under a microscope, working with extremely small components in a clean, controlled environment? Were supporting a UK defence manufacturer on the lookout for a detail focused Microelectronics Assembly Operator to join a high performing production team working on advanced electronic assemblies. This ro... ZIPC1_UKTJ

Are you a Mechanical or Metrology focused Engineer with hands on calibration and CMM experience? As a trusted UK Ministry of Defence partner, MBDA is seeking a Mechanical Engineer to join its Calibration & Metrology team in Bolton. This is a technically engaging role supporting manufacturing across assembly, integration and test, working closely with production, quality and engineering teams to ens... ZIPC1_UKTJ

Job Title: Senior Mechanical Design Engineer – Special Purpose Fabrication EquipmentLocation: Manchester (On-Site)Salary: Competitive – dependent on experience (skills-led package)Job Type: PermanentOverview A well-established engineering business is seeking a Senior Mechanical Design Engineer to support the design and development of complex fabricated and machined equipment used in industrial and regulated environments. The role focuses on full lifecycle mechanical design, from concept through to detailed manufacturing drawings and support through fabrication and build. This is a hands-on design engineering position requiring strong experience in manufacturing-led design rather than conceptual or theoretical engineering.Key Responsibilities • Design and develop complex mechanical fabrications and assemblies for manufacture, • Produce full 3D models and detailed 2D manufacturing drawings from concept, • Create fabrication drawings suitable for laser cutting, folding, welding and assembly, • Design precision machined components including shafts, housings, couplings and fixtures, • Specify and apply correct tolerances, fits and machining requirements, • Develop assemblies incorporating bearings, sleeves, keyways and bolted connections, • Ensure designs are manufacturable, cost-effective and aligned with production capability, • Work closely with manufacturing and workshop teams to resolve design queries, • Support reverse engineering and redesign of existing equipment where required, • Interpret and adapt designs to material availability and fabrication constraints, • Provide technical input into design improvements and problem-solving activitiesEssential Requirements, • 10+ years mechanical design experience in fabrication or special purpose machinery, • Strong background in mechanical design for manufacture (DfM), • Proven experience producing detailed manufacturing drawings from scratch, • Strong understanding of sheet metal fabrication and laser cutting design principles, • Experience designing machined components and mechanical assemblies, • Knowledge of tolerancing, fits, and machining practices (limits & fits, ISO standards), • Strong proficiency in SolidWorks (professional level), • Experience with 2D CAD (AutoCAD or equivalent such as DraftSight), • Ability to interpret engineering requirements into practical manufacturing solutions, • Engineering qualification (HNC/HND or equivalent minimum), • Full UK driving licenceDesirable Requirements, • Degree-qualified in Mechanical Engineering or related discipline, • Experience within water, wastewater or process plant equipment, • Experience with stainless steel, mild steel and plastics design, • Site experience including measurements, installation or troubleshooting support, • Experience working with mixed imperial and metric design standards, • Exposure to regulated or industrial manufacturing environments, • Understanding of material selection and availability constraintsKey Skills & Attributes, • Strong practical engineering mindset, • High attention to manufacturing detail, • Ability to work independently and take ownership of design outputs, • Problem-solving capability in real-world fabrication environments, • Comfortable working across design, production and site interfaces, • Ability to manage multiple design outputs and prioritiesAdditional InformationThis role requires a strong emphasis on real-world engineering capability rather than purely software-based CAD operation. Candidates must be able to demonstrate practical design experience through previous projects and manufacturing outputs.Salary will be reflective of experience and capability, with higher remuneration available for candidates who meet a broader range of the desirable criteria.

Quality ManagerGlobal Manufacturing | Fire Protection Systems | Critical InfrastructureFull-Time | Permanent | Competitive Salary + Package An established international manufacturing business operating within highly regulated fire protection and critical infrastructure sectors is seeking an experienced Quality Manager to lead and develop its global quality function. This is a high-impact leadership role responsible for owning and continuously improving the organisation's Quality Management System (QMS) across multiple international manufacturing locations. You will drive consistency, compliance, and operational excellence across the full manufacturing lifecycle, from raw material receipt through production, assembly, inspection, testing, and final dispatch. Working closely with senior leadership, you will act as the global authority on quality, ensuring all products meet customer specifications, regulatory obligations, and industry standards, while fostering a culture of right-first-time manufacturing and continuous improvement. The Role Key responsibilities include: • Leading, maintaining, and improving the global QMS in line with ISO 9001 and relevant standards, • Standardising quality processes, inspection criteria, and documentation across multiple manufacturing sites, • Managing internal audits, third-party audits, and certification programmes, • Driving non-conformance management, CAPA, root cause analysis, and 8D investigations, • Overseeing in-process quality controls across fabrication, assembly, wiring, testing, and dispatch, • Developing supplier quality programmes, supplier audits, and incoming inspection strategies, • Ensuring compliance with relevant fire protection, suppression, and detection standards, • Supporting product quality requirements for critical infrastructure and data centre environments, • Leading global quality teams, mentoring site quality managers, engineers, and inspectors, • Driving lean quality initiatives including FMEA, SPC, MSA, control plans, and continuous improvement projects We are looking for a driven and technically strong quality leader with: • Degree, HND, or HNC in Engineering, Manufacturing, Quality, or related field, • Lead Auditor qualification for ISO 9001, • Proven quality management experience within manufacturing, • Strong experience managing site or multi-site QMS, ideally across international locations, • Background in regulated product manufacturing, ideally within fire protection, engineered systems, or critical infrastructure, • Excellent knowledge of ISO 9001, audits, CAPA, supplier quality, and inspection planning, • Experience with root cause analysis, FMEA, SPC, and continuous improvement methodologies, • Strong leadership capability across geographically dispersed teams, • Confidence working across shop floor operations, suppliers, customers, and executive stakeholders, • Six Sigma certification, • CQI membership or chartership pathway, • Fire protection industry experience, • Exposure to data centre or mission-critical infrastructure environments, • Competitive salary commensurate with experience, • Company pension, • 25 days holiday plus bank holidays, • Private healthcare (subject to eligibility), • Professional development support About Cast UK Cast UK is a leading executive consultancy, providing national recruitment solutions to both clients and candidates. Specialising in Business Change & Transformation, HR, Procurement, Buying, Supply Chain, and Logistics, each member of our specialist team has a professional background specific to their recruiting sector. With this unique insight and knowledge, our consultants are able to place individuals from trainee through to main board. For more information on Cast UK and a complete list of all of our current vacancies, please visit

Our client, a trusted partner of the UK's Ministry of Defence, is seeking an experienced Manufacturing Engineer with expertise in Assembly and Integration, particularly in circuit card assemblies. Based within the unit and missile assembly manufacturing facility, you will play a key role in ensuring products are built efficiently, on time, and within budget. As a vital member of the Manufacturing Engineering team, you will provide support across multiple projects, contributing to the successful delivery of high-quality manufacturing solutions. Key Responsibilities: • Prepare and maintain detailed Manufacturing Instructions to ensure accuracy and clarity., • Design, commission, and validate the necessary tooling for production processes., • Support industrial validation activities, including FMEA and First Article Inspection (FAI)., • Diagnose and resolve technical issues encountered during manufacturing., • Update route cards to reflect changes resulting from rework activities., • Manage configuration control by incorporating design modifications into manufacturing documentation., • Electrical/Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved, • (These qualifications must meet the standard to be considered for the role)., • "or", • BEng Degree in a relevant Engineering subject. Skill Requirements: • Ability to interpret design drawings and produce precise Manufacturing Build Instructions for both skilled and semi-skilled operators., • Proven experience in electronic sub-assembly manufacturing through to full system builds., • Knowledge and hands-on experience of assembly processes for small or miniature electro-mechanical actuation systems., • Strong team player with the ability to collaborate and contribute effectively within a group environment., • Ability to understand and respond to customer requirements., • Familiarity with and adherence to company processes and procedures., • Excellent communication skills, capable of engaging effectively within the team and across various organisational levels. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenshipRestrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the roleFor more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

World Class Defence Organisation based in Bolton is currently looking to recruit a General Operative (Microelectronics) on an initial 12 month contract. This position will specifically require experience with strong soldering experience. Any prior microelectronics experience would be great, i.e. soldering under a microscope. You will also need experience working within a manufacturing environment. Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph. Overtime hours (over 37 hours) are at normal hourly rate plus 50% Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Job Spec:The General Operator will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. • Carry out detailed standard assembly / manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements and timescales., • Very good Soldering experience is required, • Any experience of soldering under a microscope or in a similar environment would be great, • Any Looming or PCB experience would be great, • Previous background of working in a Production Technician or Assembly Operative role would be great, • Contribute to the efficient movement of work and information in the manufacturing area., • Adhere in all activities to agreed standards and behaviours., • Comply with all health and safety requirements., • IPC 610 certified / trained preferred., • Dexterity for fine work. Read and interpret layouts. Follow instructions. Willing to work flexible shift patterns. Attention to detail. Work on own with minimal supervision. Flexible. ESD training. Desirable skills: PC literate. Colophony health surveillance.

Mechanical Design Engineer Middleton, Manchester Permanent • Annual Pay Rate: £42,500 - £47,500, • Hours: 7:30 - 16:00 Monday to Thursday 7:30 - 12:30 Friday, • Holiday: 26 + 8 bank holidays, • About the Role, • We are looking for a Mechanical Design Engineer to join our Manchester based team. This role will support the design and development of engineered products and systems, ensuring solutions are robust, compliant, and fit for purpose., • The successful candidate will be responsible for delivering design work from concept through to manufacture, working closely with internal teams including Production, Projects, and Procurement to ensure designs meet operational and customer requirements. This is not a graduate or entry level role, and candidates should have prior experience delivering design work within an engineering or manufacturing environment. Collaborative, inclusive, and innovative work environment Professional growth and development opportunities Access to cutting-edge tools and technologies • Key Responsibilities, • Maintain a strong awareness of global market trends and demands, • Innovate, design, and develop customer-centric equipment solutions, • Simplify new and existing product designs to reduce costs and improve production throughput, • Conduct engineering analyses such as FEA and hand calculations to support modifications and upgrades, • Produce and review mechanical engineering documentation, • Ensure all outputs comply with company policies and regulatory standards, • Participate in internal design reviews and understand their commercial implications, • Maintain thorough and accurate project documentation, • Adhere to internal checking, approval, and Engineering Change Procedures, • Prioritize customer care and uphold quality standards, • Investigate and resolve engineering queries in a timely and technically sound manner, • Qualifications & Skills, • HND in an Engineering discipline or equivalent (Essential), • Tertiary education in an Engineering discipline (Desirable), • Proficient in 3D CAD software for engineering design and drawings, • Strong understanding of mechanical engineering principles and related calculations, • Familiarity with Design for Manufacture, Assembly, and Maintenance, • Knowledge of industry materials and their applications, • Understanding of regulatory standards including Machinery (Safety) Directive, PED, ATEX, and REACH This is not a graduate or entry level role Candidates should have prior experience delivering design work within an engineering or manufacturing environment Join our Global Family At NOV, we are committed to supporting your personal, financial, and professional wellbeing. Our comprehensive benefits package includes: • Health & Wellbeing, • Private Medical Insurance, • Employee Assistance Programme (EAP), • Finance & Protection, • Pension Plan, • Income Protection, • Life Assurance, • Personal Accident Coverage, • Flexible Benefits (via salary sacrifice options for you and your family), • Dental Insurance, • Healthcare Cash Plan, • Partner Life Assurance, • Critical Illness Cover, • Retail Vouchers, • Gym Membership, • Cycle to Work Scheme, • Travel Insurance Privacy Statement Dexters Recruitment Ltd collects and processes your personal data during recruitment in line with UK GDPR to assess your suitability for a role, based on legal obligations, contractual steps, and our legitimate interests. Data may come from you or third parties (e.g. referees) and may be shared internally or with trusted partners for recruitment purposes. We retain all applicant data for up to 36 months on our database for work finding purposes, unless you request us not to do so. You have rights over your data and can contact us or the ICO with questions or concerns. For more information see our privacy policy on our website.

Job Title: Mechanical / Assembly Fitter Location: Manchester Salary: £19.82 per hour Job Type: Permanent, Full time (4 days a week Mon-Thurs) 36hr week Do you have mechanical engineering skills ideally looking to be part of a successful, niche, but industry leading organisation? EDM design, manufacture and install specialist mechanical applications to a diverse client base. On offer is an opportunity to work for a company that have an excellent reputation in their industry and a state-of-the-art facility to enable them to deliver on bespoke projects for a range of clients. We are currently recruiting for a time served Mechanical Fitter on a permanent basis to join our developing production teams. The Mechanical Fitter is a skilled operative who is responsible for the Manufacture, Assembly and Installation of Hardware Products and equipment both inhouse and at customer sites worldwide. Within your department, you may be required to work without or outside of technical drawings/specifications and will need to be a problem solver/solutions focused. Duties and Responsibilities: • Interpret engineering drawings, documents, manuals and technical instructions with clear understanding., • Work in accordance with the Dimensional data, Tolerance, Finish, Treatment stated when required., • Be skilled in the use of measuring equipment., • Have knowledge and skill in the use of hand tools and power tools. Key Requirements: • Completion of a recognised technical/engineering apprenticeship or experience to equivalent depth., • Ideally previous experience of fitting jigs, fixtures and assemblies etc., • Previous experience of working in an aerospace environment would be advantageous., • Ability to work to tight tolerances and work from verbal instructions., • Excellent planning and organisation skills with strong attention to detail and accuracy., • Excellent communication skills., • Flexibility - shift working and overtime working may be required., • 4 day, 36hr week Monday to Thursday, • Supportive and enjoyable working environment, • Continuous Training and development, • Company Pension, • 25 days holiday + public holidays pro rata Candidates with the relevant experience or job titles of; Mechanical Engineer, Maintenance Engineer, Mechanical Engineering, Engineering Maintenance, Engineering Installations, Multi-skilled Engineer, Mechanical Fitter, Technical Engineer, Mechanical Support Technician, Service Engineer, Assembly Engineer, Assembly Fitter may also be considered for this role

Job Title: Electrical Control Panel Wirer\n\nLocation: Manchester\n\nSalary: £19.82 per hour\n\nJob Type: Permanent, Full time (4 days a week Mon-Thurs) 36hr week\n\nDo you have experience in electrical and electronic control systems ideally looking to be part of a successful, niche, but industry leading organisation?\n\nEDM design, manufacture and install specialist mechanical applications to a diverse client base. On offer is an opportunity to work for a company that have an excellent reputation in their industry and a state-of-the-art facility to enable them to deliver on bespoke projects for a range of clients.\n\nWe are currently recruiting for a Electrical Control Panel Wirer on a permanent basis to join our developing production teams. Electrical Control Panel Wirer is a skilled operative who is responsible for the electrical control panel build and I/O cable wiring of EDM training devices.\n\nDuties and Responsibilities:\n\nInstall trunkings, terminal rails, electrical components & labels to Solidworks electrical GA drawings.\nPlate electrical wiring using Solidworks electrical schematics.\nInstallation of cable trays, cable ducts where application in training devices.\nInstallation of field cables as per Solidworks cable schedule.\nBench assembly of various small assemblies, including soldering. Soldering skills essential.About you:\n\nKey Requirements:\n\nGood understanding of Solidworks, Autocad GA and schematic drawings.\nProven experience of control panel plate / panel fit out.\nCompletion of a recognised apprenticeship or experience to equivalent depth.\nA team player able to communicate at all levels.\nMust have good work ethic.\nA keen eye for detail.\nAbility to prioritise work load and work on own initiative\nFlexibility - shift working and overtime working may be required.\nAbility to achieve UK security clearance is essential due to ongoing Military/Defence projects.Benefits:\n\n4 day, 36hr week Monday to Thursday\nSupportive and enjoyable working environment\nContinuous Training and development\nCompany Pension\n25 days holiday + public holidays pro rata\nLife Insurance following 12 months servicePlease click on the APPLY button to submit your CV for this role.\n\nCandidates with the relevant experience or job titles of; Control Panel Engineer, Electrician, Technician, Panel Fitter, Control Panel Fitter, Control Panel Wirer, Field Service Engineer, Service Engineer, Multi-Skilled Engineer, Mechanical Engineer, Maintenance Engineer, Mobile Technician, Fault Repair Engineer may also be considered for this role

PCB Assembly Technician Location: North West England Job Type: Full-time Salary: Competitive (dependent on experience) About the Role We are looking for a skilled and motivated PCB Assembly Technician to join a growing manufacturing team. This is an exciting opportunity to work within a modern production environment, supporting the assembly and testing of high-quality electronic products. You will pla... ZIPC1_UKTJ

The Role As a Mechanical Design Engineer, you will be responsible for developing practical, robust, and compliant engineering solutions while working closely with Production, Projects, and Procurement teams. Key responsibilities include: • Designing and developing customer-focused engineering solutions, • Producing detailed 3D CAD models and engineering drawings, • Supporting product improvements to reduce costs and improve manufacturability, • Conducting engineering calculations and FEA analysis, • Producing and reviewing engineering documentation, • Participating in design reviews and change management processes, • Ensuring compliance with engineering standards and regulations, • Investigating and resolving engineering queries efficiently, • HND or equivalent qualification in an Engineering discipline, • Previous experience in a mechanical design role within engineering/manufacturing, • Strong 3D CAD experience, • Good understanding of mechanical engineering principles and calculations, • Knowledge of Design for Manufacture and Assembly (DFMA), • Familiarity with engineering materials and applications, • Awareness of industry regulations including Machinery Safety Directive, PED, ATEX, and REACH, • Strong Microsoft Office skills including Excel and WordWorking Hours & Flexibility, • Monday to Thursday: 7:30am - 4:00pm, • Friday: 7:30am - 12:30pm, • Private Medical Insurance, • Pension Scheme, • Life Assurance, • Income Protection, • Employee Assistance Programme, • Critical Illness Cover options, • Dental Insurance options, • Gym Membership scheme, • Cycle to Work scheme, • Travel Insurance options, • Retail discounts and flexible benefits platform

Operations Manager - progression to Operations Director £65,000pa (DOE) Bolton Permanent ASAP start date I am recruiting for an exciting Manufacturing business based in Bolton, who are seeking an experienced Operations Manager to join their team on a permanent basis. This role will have progression into an Operations Director position in the next few years, offering an excellent career path for a motivated individual who can drive operational excellence across all areas. This is a newly created position, so is a great opportunity to mould and shape the departments and really have an impact. Key Responsibilities • Overseeing several key departments - Production, Engineering, Purchasing & Warehouse, • Warehouse & Manufacturing oversight, distribution management, stock and materials control and team leadership, • Lead production planning to ensure timely in-house manufacturing and distribution, evaluating the most cost-effective mix of in-house and external production to meet sales demand., • Plan and allocate labour resources efficiently to maximise productivity and output., • Collaborate with R&D, Quality, and Purchasing teams to introduce new product ranges, optimise manufacturing processes, and improve assembly methods., • Regularly review "Make or Buy" decisions in partnership with Purchasing to ensure an effective and reliable supply chain., • Work closely with other department heads to create seamless, integrated operational processes., • Contribute to budgeting and operational management, identifying opportunities for cost reduction and process improvement across the department., • Oversee the engineering function, ensuring product development supports operational goals., • Maintain all company VCA accreditations, ensuring compliance and documentation are current., • Implement production engineering strategies that enhance efficiency and reduce reliance on manual labour., • Support the development and implementation of an ISO-compliant management system., • Ensure all team members work safely and maintain a hazard-free workplace through risk assessments and health & safety protocols., • Ensure sales dispatch targets and customer delivery expectations are consistently met., • Organise the storage, movement, and distribution of goods in the most cost-effective and efficient way., • Monitor stock levels, order schedules, and transportation daily to maintain smooth operations., • Optimise the use of external transport resources and manage warehouse capacity efficiently., • Maintain accurate stock inventories, implement quality checks, and drive continuous improvement initiatives., • Previous Operations Leadership experience within Manufacturing or Engineering, • A degree in Engineering or similar would be advantageous but is not essential - this client is more interested in experience, • A people-centric leader, who can engage and motivate teams efficiently and provide clear direction, • Someone who is happy to get under the skin of the business and be hands on (not on the tools), willing to get stuck in, • Previous experience in improving processes and efficiencies, • A salary of circa £65,000pa, however the client will pay more for the right candidate, • 32 days holiday including bank holidays, • Onsite parking, • Excellent progression opportunities, clear direction to achieve Director title, • Great company culture, growing business Butler Rose is committed to equality in the workplace and is an equal opportunity employer.Butler Rose Ltd is acting as an Employment Business in relation to this vacancy.

PE Global is currently recruiting for an experienced Mechanical Design Engineer to join our industrial engineering client (NOV) based in Middleton, Manchester, UK. The role is a permanent position and the salary for this role is £47,500 per annum. The role is hybrid with 3 days in office / 2 WFH. Hours: 7:30 - 16:00 Monday to Thursday 7:30 - 12:30 Friday Key Responsibilities: • Design and develop mechanical products and engineered systems from concept through to manufacture, • Produce and review 3D CAD models and detailed engineering drawings, • Carry out engineering analysis including FEA and hand calculations to support design modifications and improvements, • Simplify and optimise existing designs to reduce cost and improve manufacturability and production efficiency, • Work closely with Production, Projects, and Procurement teams to ensure designs meet operational and customer requirements, • Ensure all engineering outputs comply with relevant internal standards, policies, and regulatory requirements, • Participate in internal design reviews and assess commercial and technical implications of design decisions, • Maintain accurate engineering documentation and adhere to Engineering Change Control procedures, • Investigate and resolve technical engineering queries in a timely and effective manner, • Ensure designs comply with industry regulations including Machinery Safety Directive, PED, ATEX, and REACH standards, • Support customer-focused engineering solutions and uphold high quality standards across all deliverables Requirements: • HND in Mechanical Engineering or equivalent qualification (essential), • Proven experience in a Mechanical Design Engineer role within an engineering or manufacturing environment (non-graduate level), • Proficiency in 3D CAD software for mechanical design and drafting, • Strong understanding of mechanical engineering principles and engineering calculations, • Experience with Design for Manufacture, Assembly, and Maintenance (DFMA), • Knowledge of engineering materials and their applications in industrial design, • Familiarity with relevant industry regulations (Machinery Safety Directive, PED, ATEX, REACH), • Competence in Microsoft Excel, Word, and Outlook Please note PE Global cannot provide visa sponsorship for this role, candidates will need the full right to live and work within the UK indefinitely.

Electrical Drafting Engineer Location: UK, Remote Salary: Up to £45,000 + Benefits My client are a growing engineering organisation delivering advanced technology solutions within the defence and maritime sector. They’re seeking an Electrical Drafting Engineer to join its expanding engineering team. This role will focus on producing high-quality electrical schematics, wiring diagrams, and panel layouts using Zuken E3, supporting the development of complex electromechanical systems used in safety-critical applications. The Role You will be responsible for creating and maintaining accurate ECAD documentation while supporting engineering, manufacturing, and production teams throughout the project lifecycle. Key responsibilities include: • Producing electrical schematics, wiring diagrams, and layouts using Zuken E3, • Maintaining drawing standards and ECAD documentation quality, • Supporting electrical parts libraries and configuration control processes, • Working closely with engineering and manufacturing teams to resolve technical documentation queries, • Assisting with process improvements, drafting standards, and template development, • Supporting continuous improvement initiatives across the ECAD function Requirements • Experience using Zuken E3 would be beneficial but they can train candidates, • Ability to create clear, accurate electrical schematics and wiring documentation, • Understanding of electrical parts libraries and component management, • Familiarity with configuration control and engineering change processes, • Knowledge of manufacturing and assembly considerations within electrical systems, • Experience working within engineering or highly regulated industries is advantageous Package & Benefits • Remote, UK based, • Salary up to £45k, • 25 days holiday plus bank holidays, • Bonus scheme and enhanced pension contribution, • Private medical insurance, • Ongoing training and development opportunities, • Additional wellbeing and lifestyle benefits If this role is of interest then please apply or send your CV to

We are looking for a Mechanical Design Engineer to join our Manchester-based team (Greengate). This role will support the design and development of engineered products and systems, ensuring solutions are robust, compliant, and fit for purpose. The successful candidate will be responsible for delivering design work from concept through to manufacture, working closely with internal teams including Production, Projects, and Procurement to ensure designs meet operational and customer requirements. This is not a graduate or entry-level role, and candidates should have prior experience delivering design work within an engineering or manufacturing environment. About the Role We are looking for a Mechanical Design Engineer to join our Manchester based team. This role will support the design and development of engineered products and systems, ensuring solutions are robust, compliant, and fit for purpose. The successful candidate will be responsible for delivering design work from concept through to manufacture, working closely with internal teams including Production, Projects, and Procurement to ensure designs meet operational and customer requirements. This is not a graduate or entry level role, and candidates should have prior experience delivering design work within an engineering or manufacturing environment. What We Offer Opportunity to work on diverse and exciting engineering projects Collaborative, inclusive, and innovative work environment Professional growth and development opportunities Access to cutting-edge tools and technologies Key Responsibilities Maintain a strong awareness of global market trends and demands Innovate, design, and develop customer-centric equipment solutions Simplify new and existing product designs to reduce costs and improve production throughput Conduct engineering analyses such as FEA and hand calculations to support modifications and upgrades Produce and review mechanical engineering documentation Ensure all outputs comply with company policies and regulatory standards Participate in internal design reviews and understand their commercial implications Maintain thorough and accurate project documentation Adhere to internal checking, approval, and Engineering Change Procedures Prioritize customer care and uphold quality standards Investigate and resolve engineering queries in a timely and technically sound manner Qualifications & Skills HND in an Engineering discipline or equivalent (Essential) Tertiary education in an Engineering discipline (Desirable) Proficient in 3D CAD software for engineering design and drawings Strong understanding of mechanical engineering principles and related calculations Familiarity with Design for Manufacture, Assembly, and Maintenance Knowledge of industry materials and their applications Understanding of regulatory standards including Machinery (Safety) Directive, PED, ATEX, and REACH Proficient in Microsoft Excel, Word, and Outlook Additional Information This is not a graduate or entry level role Candidates should have prior experience delivering design work within an engineering or manufacturing environment

We are currently recruiting for a time served Mechanical Fitter on a permanent basis to join our developing production teams. The Mechanical Fitter is a skilled operative who is responsible for the Manufacture, Assembly and Installation of Hardware Products and equipment both inhouse and at customer

Job Title: Line Leader Warehouse Location:M17 Pay Rate:£13.30 per hour Hours:Monday to Friday, 7:00am 5:00pm We are currently recruiting for a reliable and experienced Line Leader to join our busy warehouse team based in M17. Key Responsibilities: • Managing and overseeing a production/warehouse line, • Supervising staff to ensure targets and quality standards are met, • Supporting daily operations including picking, packing, and assembly, • Ensuring health and safety procedures are followed at all times, • Previous experience in a warehouse or production environment, • Experience in a supervisory or team leader role preferred, • Strong organisational and communication skills, • Ability to work in a fast-paced environment

We are seeking a skilled Punch Press Operator to join our manufacturing team. The ideal candidate will be responsible for operating punch presses to produce high-quality sheet metal components, ensuring precision and safety at all times. This role offers an excellent opportunity for individuals with a background in fabrication and mechanical processes to develop their expertise within a dynamic environment. You will be using an Amada Vipros King. This is a permanent, full-time role, 39 hours per week Pay: £30,500 per annum + overtime available Duties * Set up and operate punch presses according to specifications and production schedules * Load and unload sheet metal materials, ensuring correct positioning for accurate punching * Monitor machine operation, adjusting settings as necessary to maintain quality standards * Perform routine inspections of tools and equipment, conducting minor maintenance or troubleshooting when required * Assist with grinding, welding, or assembly tasks as needed to support production processes * Maintain a clean and organised work area, adhering to health and safety regulations * Document production data accurately and report any machine malfunctions or safety concerns promptly Skills * Proven experience in fabrication, sheet metal work, or similar manufacturing roles * Proficiency with hand tools, tooling, and basic mechanical knowledge * Ability to o...

Production Technician Location: Near Bury St Edmunds, Suffolk £14. Mon-Fri, 8:00-5:00 We are recruiting for a hands-on Production Technician to join a specialist engineering manufacturer supporting the assembly and testing of bespoke electro-mechanical products. This role involves mechanical/electr

Our client is a leading company in their industry, proud of innovation, quality, and a commitment to excellence.As an Assembly Operator, you will be an integral part of our dynamic production team, contributing directly to the success of our operations.Read and interpret technical drawings, schemati

A manufacturing firm is looking for a skilled PCB Assembly Technician in North West England.You will support high-quality electronic product assembly and testing while ensuring production targets are met and safety standards are maintained.Candidates should have experience in PCB assembly, hand sold

A leading manufacturing company in Manchester is seeking motivated individuals to join their engineering team for the assembly and production of a variety of products.

New Job!Key Responsibilities:* Fabrication and welding of sheet metal components according to technical drawings* MIG and TIG welding of steel and metal structures* Assembly and preparation of metal parts for production and installation* Quality control of finished elements and maintaining produ

Working as part of an established engineering team, this role involves hands‑on assembly and production of a wide range of fabricated and fully assembled products. Supporting production targets and deadlines. Experienced in manufacturing, production and/or assembly work.

Until Dec 2026 (extension likely).Join a leading global manufacturing environment as a Night Shift Industrial Assembly Engineer, working on advanced production technologies and high-impact engineering projects.You'll play a key role in improvin.

Our client has an opportunity for a Mechanical Engineer to join their Calibration and Maintenance Team. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. Role: Mechanical Engineer Location: Bolton, fully onsite Hours: 37 per week Hourly Rate: £32-£35 per hour via Umbrella, inside IR35 Clearance: SC required before starting What you'll be doing: The main aspects of the role will be as technical support for the metrology department supporting COTS (commercial of the shelf) equipment and STTE (Special to type test equipment) calibration and maintenance. You will be required to assist production with technical queries on fixtures and tooling along with supporting CMM (Co-ordinate measuring machine) inspection work. You will be required to guide operators on best practice within the metrology department on day-to-day technical queries alongside looking at ways to improve process and measurement techniques within the department. You will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations. Requirements: Minimum qualification: HNC in Mechanical Engineering. Experience and knowledge of calibrating torque tools to ISO 6789-2:2017 required. Good knowledge of Geometric Dimensioning & Tolerancing (GD&T) required. Experience and knowledge in dimensional calibration required Experience and knowledge of using and creating programs for coordinate measuring machine required. Good knowledge of temperature and pressure calibration desirable Able to deal with multiple issues, tasks and priorities concurrently.If you are interested in applying for this position and you meet the requirements, please apply immediately! Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. "Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

The Role Semi Skilled Fitter / Mechanical Assembler As a Semi Skilled Fitter, you will be responsible for assembling mechanical components and complete assemblies in line with engineering drawings and company specifications. Key Responsibilities: Assemble and construct complete mechanical assemblies from engineering drawings Work from general arrangement and detailed engineering drawings Ensure all components are correctly aligned using appropriate jigs and tools Monitor build quality and ensure all parts are fit for purpose Carry out quality checks throughout the assembly process Identify and report non-conforming or damaged parts to the supervisor Ensure all work is fully understood before commencing final assembly Complete builds within agreed timeframes and to required specifications Maintain accurate quality and production records Follow company procedures and comply with all health & safety regulations Shifts Available: Two day shift options available: Option 1 6:00am Start Monday Thursday: 6:00am 3:00pm Friday: 6:00am 11:00am Option 2 7:00am Start Day shift (hours to be confirmed at interview) Early finish on Fridays. Skills & Experience Required: Experience in mechanical assembly, fitting or engineering workshop environment Ability to read and understand engineering drawings Experience using hand tools, jigs and assembly equipment Strong attention to detail and quality standards Good understanding of health & safety within a manufacturing environment Reliable with good timekeeping This role would suit a Semi Skilled Fitter, Mechanical Assembler, Production Fitter or Assembly Technician looking for a stable day shift position. How to Apply: To apply for this Semi Skilled Fitter role, please forward your CV in Word format. Due to high volumes of applications, only candidates who meet the required criteria will be contacted. TPBN1_UKTJ

Job Title: Senior Mechanical Design Engineer – Special Purpose Fabrication Equipment Location: Manchester (On-Site) Salary: Competitive – dependent on experience (skills-led package) Job Type: Permanent Overview A well-established engineering business is seeking a Senior Mechanical Design Engineer to support the design and development of complex fabricated and machined equipment used in industrial and regulated environments. The role focuses on full lifecycle mechanical design, from concept through to detailed manufacturing drawings and support through fabrication and build. This is a hands-on design engineering position requiring strong experience in manufacturing-led design rather than conceptual or theoretical engineering. Key Responsibilities Design and develop complex mechanical fabrications and assemblies for manufacture Produce full 3D models and detailed 2D manufacturing drawings from concept Create fabrication drawings suitable for laser cutting, folding, welding and assembly Design precision machined components including shafts, housings, couplings and fixtures Specify and apply correct tolerances, fits and machining requirements Develop assemblies incorporating bearings, sleeves, keyways and bolted connections Ensure designs are manufacturable, cost-effective and aligned with production capability Work closely with manufacturing and workshop teams to resolve design queries Support reverse engineering and redesign of existing equipment where required Interpret and adapt designs to material availability and fabrication constraints Provide technical input into design improvements and problem-solving activitiesEssential Requirements 10+ years mechanical design experience in fabrication or special purpose machinery Strong background in mechanical design for manufacture (DfM) Proven experience producing detailed manufacturing drawings from scratch Strong understanding of sheet metal fabrication and laser cutting design principles Experience designing machined components and mechanical assemblies Knowledge of tolerancing, fits, and machining practices (limits & fits, ISO standards) Strong proficiency in SolidWorks (professional level) Experience with 2D CAD (AutoCAD or equivalent such as DraftSight) Ability to interpret engineering requirements into practical manufacturing solutions Engineering qualification (HNC/HND or equivalent minimum) Full UK driving licence Desirable Requirements Degree-qualified in Mechanical Engineering or related discipline Experience within water, wastewater or process plant equipment Experience with stainless steel, mild steel and plastics design Site experience including measurements, installation or troubleshooting support Experience working with mixed imperial and metric design standards Exposure to regulated or industrial manufacturing environments Understanding of material selection and availability constraints Key Skills & Attributes Strong practical engineering mindset High attention to manufacturing detail Ability to work independently and take ownership of design outputs Problem-solving capability in real-world fabrication environments Comfortable working across design, production and site interfaces Ability to manage multiple design outputs and priorities Additional Information This role requires a strong emphasis on real-world engineering capability rather than purely software-based CAD operation. Candidates must be able to demonstrate practical design experience through previous projects and manufacturing outputs. Salary will be reflective of experience and capability, with higher remuneration available for candidates who meet a broader range of the desirable criteria

An opportunity has become available at the MBDA UK Bolton site to work as part of a team of experienced engineers to support the increasing product delivery requirements, maintaining and improving processes and standards to achieve this. Salary: Circa £43,000 depending on experience Dynamic (hybrid) working: Minimum of 4 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As a Process Engineer, you will work as part of the Printed Circuit Card Assembly (PCBA) manufacturing business unit with a focus on the manufacture of our products. The Circuit Card Assembly (CCA) Business unit produces high complexity products with a high mix, low volume output. The business unit is rapidly growing in order to achieve the large backlog of orders over the next 5-10 years, with the production output more than tripling. You will be a part of the process engineering team working closely with test, manufacturing and quality engineers whilst building strong relationships with stakeholders including the operations, design support and calibration and maintenance teams. This role reports to the Principal Process Engineer within the CCA business unit. The Role: You will be responsible for various technical aspects of PCBA. This will involve working on creating and maintaining standards, identifying and carrying out continuous improvement activities, solving technical problems, all whilst considering quality as intrinsic to the role. The opportunity also allows you to grow your knowledge within manufacturing as part of development into future opportunities. Industrial Validation, manufacturing architecture and factory of the future are some of the work packages that can provide stretch objectives for such growth. Key Responsibilities: Supporting the manufacturing area in its growth and rate increase. Carrying out improvement activities - data gathering and data analyses to understand impact and effort required. Support the Non-Conformance process - root cause analyses, implementation of effective corrective and preventative actions. Interface with the design authority during the product development phase to ensure optimised Design for Manufacture (DfM), and in the production phase for management of change implementation. This includes supporting the New Product Introduction team in creating/improving design rules for manufacturability of circuit cards. Ensure processes and equipment contribute to a safe working environment following both company processes and legal obligations, meeting internal quality requirements. Develop and maintain manufacturing methods, processes and equipment with a data-based approach, using methods such as SPC, to support a robust manufacturing system. Resolve issues and queries with the operations team on the shop floor. Perform and review PFMEAs. Develop tooling to aid the manufacturing process. Create and modify machine programmes for the assembly, manufacture or inspection of circuit cards.What we're looking for from you: An understanding and appreciation for quality control. Analytical mindset with the willingness to learn. Proficient in computer and internet use, including proficiency in commonly used applications such as Microsoft Office Suite & manufacturing systems such as: ERP systems, Manufacturing Execution System etc. Experience in Circuit Card Manufacturing or Design is beneficial. Knowledge of PCBA Processes and Technologies is beneficial. A proactive approach to process improvements. QUALIFICATIONS (Must Have) Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 Formal further education certificate to HND or equivalent in a relevant subjectALTERNATIVELY BEng/BSc in relevant Engineering/Technical DegreeOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

World Class Defence Organisation based in Bolton is currently looking to recruit 2x General Operative’s with very strong Soldering experience an initial 12 month contract. This position will specifically require experience with strong soldering or Circuit Card Assembly (CCA) or PCB Assembly experience. Any prior microelectronics experience would be great, i.e. soldering under a microscope. You will also need experience working within a manufacturing environment. Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph. Overtime hours (over 37 hours) are at normal hourly rate plus 50% Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Job Spec: The General Operator will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Carry out detailed standard assembly / manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements and timescales. Very good Soldering experience is required Any experience of soldering under a microscope or in a similar environment would be great Any Looming or PCB experience would be great Previous background of working in a Production Technician or Assembly Operative role would be great Contribute to the efficient movement of work and information in the manufacturing area. Adhere in all activities to agreed standards and behaviours. Comply with all health and safety requirements. IPC 610 certified / trained preferred. Dexterity for fine work. Read and interpret layouts. Follow instructions. Willing to work flexible shift patterns. Attention to detail. Work on own with minimal supervision. Flexible. ESD training. Desirable skills: PC literate. Colophony health surveillance

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit a Mechanical Engineer subcontractor on an initial 12-month contract. Hourly Rate: £35ph Overtime Rate: Hours worked over 37 hours per week, are worked at the Overtime rate of time and a quarter. Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Mechanical Engineer Job Description: We are seeking a Mechanical Engineer to join our Calibration & Maintenance Team. The work is extremely varied, interesting and challenging. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across the company to resolve routine and non-routine tasks arising within the business. Responsibilities: The main aspects of the role will be as technical support for the metrology department at Bolton supporting COTS (commercial of the shelf) equipment and STTE (Special to type test equipment) calibration and maintenance. You will be required to assist production with technical queries on fixtures and tooling along with supporting CMM (Co-ordinate measuring machine) inspection work. You will be required to guide operators on best practice within the metrology department on day-to-day technical queries alongside looking at ways to improve process and measurement techniques within the department. You will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations. Skillset/experience required: Minimum qualification: HNC in Mechanical Engineering. Experience and knowledge of calibrating torque tools to ISO 6789-2:2017 required. Good knowledge of Geometric Dimensioning & Tolerancing (GD&T) required. Experience and knowledge in dimensional calibration required Experience and knowledge of using and creating programs for coordinate measuring machine required. Good knowledge of temperature and pressure calibration desirable Able to deal with multiple issues, tasks and priorities concurrently

Job Description About the Role We are looking for a Mechanical Design Engineer to join our Manchester based team. This role will support the design and development of engineered products and systems, ensuring solutions are robust, compliant, and fit for purpose. The successful candidate will be responsible for delivering design work from concept through to manufacture, working closely with internal teams including Production, Projects, and Procurement to ensure designs meet operational and customer requirements. This is not a graduate or entry level role, and candidates should have prior experience delivering design work within an engineering or manufacturing environment. About the Company NOV is a global leader in providing technology-driven solutions to the energy industry. We deliver innovative equipment and components used in oil and gas drilling and production operations, industrial and renewable sectors. Our commitment to excellence drives us to constantly evolve and enhance our product offerings to better serve our customers worldwide. What We Offer Opportunity to work on diverse and exciting engineering projects Collaborative, inclusive, and innovative work environment Professional growth and development opportunities Access to cutting-edge tools and technologiesKey Responsibilities Maintain a strong awareness of global market trends and demands Innovate, design, and develop customer-centric equipment solutions Simplify new and existing product designs to reduce costs and improve production throughput Conduct engineering analyses such as FEA and hand calculations to support modifications and upgrades Produce and review mechanical engineering documentation Ensure all outputs comply with company policies and regulatory standards Participate in internal design reviews and understand their commercial implications Maintain thorough and accurate project documentation Adhere to internal checking, approval, and Engineering Change Procedures Prioritize customer care and uphold quality standards Investigate and resolve engineering queries in a timely and technically sound mannerQualifications & Skills HND in an Engineering discipline or equivalent (Essential) Tertiary education in an Engineering discipline (Desirable) Proficient in 3D CAD software for engineering design and drawings Strong understanding of mechanical engineering principles and related calculations Familiarity with Design for Manufacture, Assembly, and Maintenance Knowledge of industry materials and their applications Understanding of regulatory standards including Machinery (Safety) Directive, PED, ATEX, and REACH Proficient in Microsoft Excel, Word, and OutlookAdditional Information This is not a graduate or entry level role Candidates should have prior experience delivering design work within an engineering or manufacturing environmentWhy Join Us? Join our Global Family At NOV, we are committed to supporting your personal, financial, and professional wellbeing. Our comprehensive benefits package includes: Health & Wellbeing Private Medical Insurance Employee Assistance Programme (EAP)Finance & Protection Pension Plan Income Protection Life Assurance Personal Accident CoverageFlexible Benefits (via salary sacrifice options for you and your family) Dental Insurance Healthcare Cash Plan Partner Life Assurance Critical Illness Cover Retail Vouchers Gym Membership Cycle to Work Scheme Travel InsuranceAbout Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team Corporate Our family of companies is supported by our global Corporate teams, providing expert knowledge from functions including Human Resources, Information Technology, Compliance, Finance, QHSE, Marketing and Legal centres of expertise. We are structured to provide guidance and service above all to all our business operations

Manufacturing Automation Engineer Location: Stockport Salary: £45,000 - £60,000 (DOE) An established engineering organisation with over a century of design and manufacturing excellence is looking to expand its team with a Manufacturing Automation Engineer. The company is recognised internationally for delivering high-quality engineering solutions to defence and industrial customers and continues to invest heavily in advanced manufacturing and innovation at its North West Centre of Excellence. About the Role This hands-on role will play a crucial part in implementing automation projects across welding and assembly operations. You'll take ownership of integrating new robotic systems, optimising processes, and driving continuous improvement initiatives across key production areas. Key Responsibilities Identify, specify, and implement new automation opportunities across welding and fabrication lines. Write technical specifications for capital equipment including robotic welding cells, CNC systems, and material handling. Manage installation, commissioning, and Site Acceptance Testing (SAT) of new robotic and automation systems. Develop and optimise robot programs and PLC logic to improve cycle times and process stability. Lead problem-solving and lean improvement activities across production teams. Drive FMEA, risk assessment, and process documentation for all automated systems. Support design-for-manufacture input on new product development projects. Ensure compliance with Health, Safety, Environmental and quality standards. About You You'll be a proactive engineer with practical experience implementing automation systems in a manufacturing environment. The ideal candidate will demonstrate: HND/Degree in Manufacturing, Mechanical, or Mechatronics Engineering. Strong knowledge of robotic programming and PLC control systems. Hands-on experience with automation projects (robotic welding, assembly, or machining). Understanding of lean manufacturing and continuous improvement methodologies. Excellent communication and problem-solving skills. Familiarity with relevant safety regulations (PUWER, CE/UKCA marking). Project management qualifications (PRINCE2, Agile, Six Sigma) advantageous. What's on Offer Competitive salary (£45K-£60K DOE). Excellent pension scheme (up to 7% employer contribution). Half-day Fridays and flexible working culture. Life assurance and enhanced sick pay. Cycle-to-work scheme, free on-site parking and EV charge points. Long service rewards and additional holidays. Employee wellbeing initiatives including EAP support and free fruit weekly. This company is proud to support the Armed Forces Covenant, welcoming applications from service leavers, reservists, and veterans. If you're passionate about automation and want to make a real impact in a dynamic, forward-thinking engineering environment - we'd love to hear from you. INDENG DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality

Are you an experienced Operations Manager within Engineering and would like to join a very well established business who are offering career progression to Director level. There is a salary of up to £68,000 plus a great benefits package and strong working culture. This is a new role within the business and the position is available to start within the next few weeks! To manage and maintain an efficient and effective Operations Department in line with Company strategy, including warehouse and manufacturing management and controls, distribution, stock and materials, staff management and labour efficiencies. Initially the role will be focussed on the production/engineering side of the business which will then lead to overseeing the warehouse/transport department. The Role: Production Planning and Management t Ensure effective planning, in-house manufacturing & distribution of products whilst balancing the advantages and disadvantages of in-house or external manufacture to ensure the most cost effective method is used to satisfy sales demand Provide cost effective and efficient planning of all labour resources and ensure optimum productivity and outputs Recruit and work closely with R&D/Quality/Purchasing staff to ensure smooth introduction of new products ranges and variants, plus improve methods of manufacture and assembly for all products. To liaise with Technical reference manufacturing and distribution improvements Constantly review ‘Make-Buy’ decisions for all manufacturing/assembly items with the Purchasing Department. TO work with Purchasing to ensure excellent supply chain service pricing and delivery Work closely with other Heads of Departments to ensure strong integrated and holistic processes and management flows. Contribute to budget planning, assimilation and operational management to ensure all activities operate within budget and seek continuous improvements in efficiencies across systems and processes to reduce operating costs wherever possible Engineering / Health and Safety & Quality Manage and maintain all Company VCA accreditation, maintenance and compliance Manage the engineering function to ensure that the company develops products as necessary Ensure production engineering complements the budget, drives increased efficiency and reduces the reliance on manual labour Ensure all Company VCA accreditation, maintenance and compliance is retained Maintain all procedures and documentation as set out in the accreditation procedures Ensure all procedures are compliant with the VCA accreditation To work towards the implementation of an ISO system of working Ensure that all Staff work in a safe manner and provide internal and external risk assessments. Ensure a safe and healthy environment free from potential hazard or risk Transportation, Distribution and Warehouse Management Ensure that all sales despatch targets are achieved and that customer delivery aspirations are met/exceeded Organise and distribute goods in the most cost effective and efficient manner Undertake frequent monitoring checks (daily) to ensure that all orders, stock and transportation are organised and scheduled in line with customer due dates. Manage and control cost effective and efficient use of external transport resources. Manage and maintain an accurate, effective and efficient stock inventory and control Develop and implement a standard of continuous improvement, maintaining a tightly managed model of 'goods in and goods out’ inspections to optimise quality standards Manage and control Storage Capacity as effectively and efficiently as possible Maintain tight cost controls across whole section About You: You will come from an Engineering background, ideally with an engineering qualification Proficient with ERP systems A self starter Experienced in managing team members Benefits: Working a 37 hour week Early finish on a Friday Pension 32 days holiday including bank holidays On site parking INDAB

World Class Defence Organisation based in Bolton is currently looking to recruit a General Operative (Microelectronics) on an initial 12 month contract. This position will specifically require experience with strong soldering experience. Any prior microelectronics experience would be great, i.e. soldering under a microscope. You will also need experience working within a manufacturing environment. Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph. Overtime hours (over 37 hours) are at normal hourly rate plus 50% Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Job Spec: The General Operator will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Carry out detailed standard assembly / manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements and timescales. Very good Soldering experience is required Any experience of soldering under a microscope or in a similar environment would be great Any Looming or PCB experience would be great Previous background of working in a Production Technician or Assembly Operative role would be great Contribute to the efficient movement of work and information in the manufacturing area. Adhere in all activities to agreed standards and behaviours. Comply with all health and safety requirements. IPC 610 certified / trained preferred. Dexterity for fine work. Read and interpret layouts. Follow instructions. Willing to work flexible shift patterns. Attention to detail. Work on own with minimal supervision. Flexible. ESD training. Desirable skills: PC literate. Colophony health surveillance

Job Title: Soldering Operative Location: Bolton About the Role Our client is a respected leader within their industry, known for innovation, quality craftsmanship, and a commitment to excellence. They are now seeking a skilled Soldering Operative to join their dynamic production team. In this role, you will play a key part in ensuring high‑quality output across a range of electrical and mechanical components. Key Responsibilities Read and interpret technical drawings, schematics, and work instructions Carry out precise soldering, wiring, cable work, and crimping tasks Inspect and test components to ensure they meet strict quality standards Identify and resolve minor production issues Maintain a clean, organised, and safe working environment Work collaboratively with team members to meet production targets and deadlines Qualifications & Experience Proven experience in soldering operations, including wiring, cable work, and crimping Confident in reading and understanding technical drawings and schematics Skilled in using a range of hand tools and equipment relevant to soldering and electrical assembly Strong attention to detail with a commitment to producing high‑quality work Ability to work efficiently in a fast‑paced, team‑focused environment Good problem‑solving skills and a proactive approach to troubleshooting Working Hours Monday to Thursday: 08:00 - 17:00 Friday: 08:00 - 13:00 Rate of Pay £12.71 per hour This position will become permanent following a successful qualifying period How to Apply To apply, please send your CV to (url removed) or call (phone number removed) for more information

Job Title: Manufacturing Operative Location: Bolton (BL3) Pay: £12.71 per hour Hours: 37.5 per week Working Schedule: Mon - Thu: 8:00 AM - 5:00 PM Fri: 8:00 AM - 1:00 PM About the Role We are looking to recruit new team members to join our manufacturing department. This is an excellent opportunity for individuals with a strong background in manufacturing and an eye for detail. Key Responsibilities Assembly and production of wiring looms, cable assemblies, and related components. Working from technical drawings and specifications. Performing quality checks to ensure compliance with customer requirements. Maintaining a clean and safe working environment. Adhering to health and safety guidelines at all times. Essential Requirements Previous experience working in a manufacturing or assembly environment. Ability to work accurately and efficiently in a fast-paced setting. Good attention to detail and manual dexterity. Desirable Experience in soldering or similar precision work. Familiarity with electrical components and wiring

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Wiring Operator on an initial 12 month contract and then ongoing and long-term thereafter. Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £28.35ph for the first 12 weeks and then £29.70 after week 12 (Umbrella). Overtime Rates of 'time and a half' for all hours worked over 37 hours per week. Electrical Wiring Operator Job Description: An exciting opportunity for a Skilled Electrical Wiring Operator to join our Calibration and Maintenance team for a 12-month period in a fast-paced but friendly and inclusive Manufacturing environment. We are seeking a Skilled Wire Operator to join our Calibration & Maintenance Team, to fault diagnose and repair bespoke cabling to drawing specifications. Fault finding and subsequent repair of cable assemblies. Carry out surface mount repair on CCAs. Maintain and repair test/measuring equipment to component level. PAT testing across the manufacturing site. Interrogate drawings during fault finding activities. Safety systems testing of Test & Measuring equipment in line with documented procedures. Provide Technical support to facilitate the efficient servicing of STTE to enable production testing of hardware and repair phases of the contract. Maintain excellent workspace husbandry disciplines. Maintain a high degree of tool control and FOD practices. Assist with maintenance of manufacturing aids as and when required. What we're looking for from you: All three of the below are required: Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved IPC 620 & Dynamic Cabling certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable

An exciting opportunity for an experienced Electrical Test Operator to join our Manufacturing Operations team in a fast-paced but friendly and inclusive Manufacturing environment. Salary: £42,558 Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: This opportunity is for an Electrical Test Operator to join the Manufacturing team supporting test and certification of a variety of electrical hardware builds, ranging from small fixtures through to complex missile systems, during all phases of the product lifecycle. You will be providing operations support to ensure programme targets are met to agreed time, cost and quality requirements. Ensuring that completed hardware builds are tested in accordance with drawing requirements and specifications; Maintaining a safe working environment in-line with 5S policies Always aiming to deliver in line with all time, cost and quality requirements Ensuring assembly unit production costs are met Maintaining, to the highest level, workmanship standards and product quality Ensuring the completion of all manufacturing documentation Working closely with fellow Operators, Engineering and Quality to overcome any technical challenges and offer feedback for continuous improvement activitiesYou will be working with a large team of multi-disciplined operators in a fast-paced but friendly and inclusive Manufacturing environment. The team has a great mix of people, ranging from apprentices through to experienced skilled technicians, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) Practiced in reading and understanding assembly drawings and planning instructions Fully conversant with all Manufacturing equipment, tools and measuring instruments Uses their initiative and can work without close supervision Goes 'the extra mile' to get work finished to a high standard Flexibility and adaptabilityOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. Salary:Up to £57,000 dependent on experience + bonus + benefits What we can offer you: Company bonus of up to £2,500 (based on company performance and will vary year to year) Pension of maximum total (employer and employee) contribution of up to 14% Paid overtime Up to 15 days flexi leave 25 days annual leave (plus holiday purchase) Possible relocation available Fantastic site facilities, including subsidised meals, free car parking and more Excellent career progression and development opportunitiesHybrid working pattern: Primarily office based (Bolton) with some opportunity for homeworking Want to be part of a successful team working to develop new and innovative seeker solutions to address complex customer requirements? Then keep reading .... The opportunity: An opportunity exists for a Electronic Engineer with broad based skills, including a strong background in RF engineering, to take a key role in the design support of seeker products being produced in our manufacturing facility based at Bolton. The Seeker Division designs and develops state of the art RF and Dual Mode (RF and IR) seekers for use in guided missile programmes. The role requires a high degree of enthusiasm and a determination to work autonomously to support the delivery of products to the right standard and within the required timescales. The role: Acting as a design team representative to interface with the design and manufacturing teams to transition a seeker from the development phase into series manufacture. Work with manufacturing on process and capability issues & support continuous improvement initiatives to maximise production yields. Support non-conformance management, dealing with design queries and advising on non-conformances where appropriate. Support manufacturing with internal and external suppliers. to aide the manufacturing team & ensure continuity of supply. Support obsolescence management by providing recommendations to the design team.What we're looking for from you: We are looking for an Electronic Engineer with the initiative and the determination to investigate and resolve production problems. A broad-based engineering background would be essential to the role and a detailed knowledge of RF assembly and test procedures would be advantageous. The successful applicant will be able to manage their own workload, interact well with both the design and manufacturing teams, work on project changes in a timely manner & maintain the production schedule. The team: The factory based Design Support Team assists with a variety of different seeker projects - no two working days will be the same! The Design Support Team interfaces with both the Stevenage design team & Bolton manufacturing teams, to help with highly technical problem solving. There are also strong relationships with external suppliers who provide sub-assemblies into the seeker build.Our Business: We respect new perspectives and experiences, and we value our collaborative ways of working. We are committed to growing and supporting diversity in our workforce and ensuring everyone has an equal opportunity to reach their potential. We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. We also welcome applicants who are looking for flexible working arrangements. Follow us on LinkedIn (MBDA), Twitter (@MBDAcareers), Instagram (lifeatMBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. Please Note: MBDA UK Limited requires all employees to achieve the required medical and national security clearance for their role. Further restrictions and/or limitations relating to nationality and/or rights to work may also apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. Due to the nature of our business, this particular vacancy requires the applicant as a minimum to be a British Citizen or a Dual UK national with British citizenship and capable of achieving the clearance levels mentioned above. #LI-SF1

Job Description NOV's Industrial Pumps and Mixer business is seeking a Skilled Mechanical Fitter to join our team in Manchester. In this role you will work as part of an assembly team responsible for the assembly and testing of NOV products. You will take a customer service approach, both internal and external, with a view that the technical services you provide are there to support the efficient management of your workspace and assembled products. You will be responsible for your own productivity output, utilising various manufacturing processes and disciplines. As a Skilled Fitter you will be keen to take on challenges, develop your technical skills potential as well as expand your knowledge and experience through a variety of exciting initiatives. DUTIES & RESPONSIBILITIES: • Assemble Pump & Mixer equipment whilst working to company procedures • Fitting of components and/or modules as directed by engineering drawings and technical specifications • Work closely with colleagues during build/install to ensure a smooth and efficient build process • Ability to conduct production tests to established procedures, and complete accurate test reports • Ensure all components which are being assembled are fit for purpose • Operate machines or use hand tools and power tools to secure parts in place. • To operate equipment in a safe manner, producing products which conforms to quality specifications • Recording work carried out for tracking purposes • Providing cover for any other positions within the department • Working to and maintaining good housekeeping standards • Comply with all NOV Company, Quality + HSE policies and procedures • Travel as and when required • Perform any other work-related tasks and duties in accordance with the business needs QUALIFICATIONS & EXPERIENCE: • Time-served apprenticeship within a Mechanical Engineering discipline, equivalent to either City and Guilds Level 3, or NVQ Level 3 (Essential), • HNC / HND qualified or equivalent, with a Mechanical Engineering bias, • Experience of PC pumps and waste water products, preferably within a service background, • Mechanical Seal knowledge, • Computer literacy (including good command of Microsoft Office Excel, Word and Outlook), • Manual handing training / Slinging & Lifting Training, • HSE awareness, • Basic Electrical experience (Desirable), • Motor Wiring certified (Desirable) About Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team Corporate Our family of companies is supported by our global Corporate teams, providing expert knowledge from functions including Human Resources, Information Technology, Compliance, Finance, QHSE, Marketing and Legal centres of expertise. We are structured to provide guidance and service above all to all our business operations

This hands-on role involves golf mat production, machine assembly, basic maintenance, and general production support. Willingness to learn machine operation, assembly, and basic maintenance. Key Responsibilities Manufacture and assemble golf mats in line with production specifications.

Working as a Production Team Leader you will supervise assembly operatives, ensuring production processes run efficiently, targets are achieved and quality standards are maintained. We have a fantastic new job opportunity for a Production Team Leader to join a busy manufacturing and assembly environ

A recruitment agency is seeking a Production Operative in Exeter, UK. Ideal candidates should have experience in a production environment, strong attention to detail, and good communication skills.

This part-time role involves supervising assembly operatives, ensuring production efficiency, and maintaining quality standards. A manufacturing company is seeking a Production Team Leader based in Heathrow, West London.

Woodlands Home & Garden Group is hiring a Production Operative in Rodley, Leeds.

A leading engineering firm in Staverton is seeking an experienced Production Manager to oversee manufacturing operations. Ideal candidates will have experience in managing production environments, knowledge of CAA regulations, and a commitment to continuous improvement.

Assembly/Production Line Operative & Manufacturing Assistant. Assist in fulfilling production orders to meet customer demand. Read and follow production instructions accurately.