Production assembly jobs in StroudCreate job alerts

Job Title: Electronic Manufacturing Technician Location: Stonehouse, Gloucestershire (Onsite) Job Type: Permanent Working Hours: 35 hours/week (7:00 AM - 2:30 PM) About the Role We are currently seeking a skilled Electronic Manufacturing Technician to join a well-established manufacturing environment. This is a hands-on role focused on testing, fault finding, and repair of electrical and electromechanical systems. You will work closely with a collaborative production team, supporting assembly, calibration, and testing activities to ensure high-quality delivery of products. Key Responsibilities • Perform testing, fault finding, and repair of electrical and electronic systems, • Support production activities including tool assembly, calibration, and testing, • Work with electrical and electromechanical tools following defined procedures, • Maintain and repair test equipment used in production, • Interpret electrical schematics and technical documentation, • Collaborate with cross-functional teams including assemblers and technicians, • Ensure compliance with quality and safety standards, • Experience in electronic testing, fault finding, and repair, • Background in a manufacturing or production environment, • Ability to read and interpret electrical schematics, • Hands-on experience with assembly, wiring, or calibration, • Strong attention to detail and problem-solving skills, • Good communication and teamwork abilities, • Experience with SAP or MRP systems is advantageous

Job Role: Electronic Technician Job Type: Permanent, Onsite Hours: 35hrs/wk – 7.00am to 14.30pm Industry: Advanced Manufacturing Location: Stonehouse, Gloucestershire Salary/Rate Expectations: £28,000 to £32,000 per annum + Overtime Profile – Electronic Technician My client is a world leader in the provision of highly advanced technical solutions to Energy sectors. They are currently looking for an Electronic Technician to join their team based at their modern fit for purpose facility. Candidates will have the opportunity to work in an environment where investment is continuous and substantial, technology is leading edge, teamwork is at the forefront of all they do, and personal development is encouraged at every stage. This is a fantastic opportunity to join a company that pride themselves on delivering high quality superior products to their sector. Duties – Electronic Technician • Test, fault finding, and repair of various electrical and electronic systems and components. • Working with the production team to help in the completion of tasks, including tool assembly, calibration, and testing • Testing electrical and electromechanical tools based on the procedure and interacting with MRP systems (SAP). • Responsible for maintaining and repairing the test equipment used to test tools. • Soldering, crimping and general wiring skills • Use of hand tools • Fault finding • Work in accordance with engineering diagram and schematics Skills/Experience – Electrical Assembler • Further education in Electrical or Electronic Engineering or equivalent experience Candidates who are currently an Assembler, Electronics Assembler, PCB Assembler, Electrical Assembler, Production Operative, Manufacturing Operative and Technician could be suitable for this position. To make an application for this role please submit your CV to or for more information call 01453829529. For details of other opportunities available within your chose field please visit our website Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. TPBN1_UKTJ

Working for the Stonehouse Engineering department, Production Engineers are responsible for end-to-end development and implementation of production assembly processes, providing operational support, troubleshooting and maintaining equipment, coordinating engineering change control, and delivering co

A leading recruitment agency is seeking a Production Operative in Haresfield, UK.

Production Assembler Location: Stonehouse Hours: Monday to Thursday, 7:30am to 4:15pm; Friday, 7:30am to 12:15pm Rate of Pay: £12.71 - £13.00 per hour First Base Employment is currently recruiting a Production Assembler for a well-established manufacturing company based in Stonehouse. This role would suit someone with hands-on assembly experience who is comfortable working from drawings and written instructions in a production environment. Key Responsibilities of a Production Assembler: • Working from customer drawings and written instructions, • Assembling cable sub-assemblies, including hand and machine crimping, • Mechanical assembly and cable preparation, • Cutting materials to specification, • Basic component assembly, • Using basic measuring and testing equipment Experience Required: • Experience with hand and/or machine crimping, • Wiring experience, • Ability to read and understand technical drawings, • Soldering experience is beneficial but not essential Why Join? • Early finish on Fridays, • Opportunity to work with a reputable and stable manufacturing company

We are looking for an experienced Toolmaker to join our Toolroom team. The role involves manufacturing, maintaining, and improving tooling and ancillary equipment used in the manufacture, assembly, and testing in the UK and overseas. Salary & Benefits £34,000 - £38,000 per year , depending on experience Stable, permanent position Opportunity to work within a well-established engineering and manufacturing environment Involvement in varied tooling, maintenance, and project work Supportive team with development opportunities Shift Pattern (Current pattern - flexibility required as this may change) Monday to Thursday: 7:45am - 12:30pm / 1:00pm - 4:45pm Friday: 7:45am - 12:30pm Key Responsibilities Manufacture, maintain, and repair tooling, jigs, fixtures, and work-holding equipment Support planned maintenance, breakdowns, and tool orders to ensure timely completion Maintain tooling and equipment used by Operations Provide day-to-day support to production for manufacturing, maintenance, and quality issues Work closely with Tool Design to ensure effective tooling solutions Feedback improvements and defects to Operations and Process Engineering Ensure all Health, Safety, and Environmental procedures are followed Support projects and continuous improvement activity Assist with supervising and training apprentices or toolroom assistants Skills & Experience (Essential) Experience working in a production or manufacturing environment Proven experience in tool, jig, fixture, and work-holding manufacture Time-served engineer or completed mechanical apprenticeship Qualified to a minimum of ONC or equivalent NVQ Good knowledge of manufacturing engineering Strong attention to detail and quality Ability to work independently and as part of a team Basic computer skills and good organisational skills Strong understanding of Health & Safety practices Desirable Experience manufacturing press tools Experience with CNC and conventional machining methods Knowledge of Continuous Improvement tools (Lean, Six Sigma, 5 Why) Problem-solving skills and ability to train others Ability to deputise for the Toolroom Team Leader when required How to Apply If you are an experienced Toolmaker looking for a hands-on role within a stable engineering environment, please apply with your CV . TPBN1_UKTJ

Job Title: Production Operative Location: Stonehouse Pay Range/details: £12.71 per hour Contract Type: Temporary Omega has an exciting opportunity to work with a leading Global manufacturer within their production team. This role is offered on a double day shift so candidates MUST be able to work on a weekly rotation as follows: - Earlies: 05:30- 13:45 (12:30 on Friday) - Lates: 14:00- 23:00 (13:00- 17:00 on Friday) Key Responsibilities – Production Operative Working within a small team of 4-6 Assembling products based on instructions Packing items into boxes ready for dispatch Quality checking Qualifications & Requirements – Production Operative Excellent attention to detail Experience within a similar environment is desirable Able to do shifts and immediately available Due to the shift times and location, candidates must have their own transportation What we can offer – Production Operative Onsite parking Opportunity to work for one of Gloucestershire's best employer For more information on this role, please contact Sam Griffin on 01453 829799 or send a copy of your CV to Omega Resource Group is acting as an Employment Business in relation to this vacancy. Omega Resource Group is an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. Candidates who are currently a Production Operative, Assembly Operative, Assembler may be suitable for this role. For details of other opportunities available within your chosen field please visit our website Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. TPBN1_UKTJ

Job Role: Electrical Assembler Job Type: Contract, Onsite Duration: 8 to 12 Months Hours: 35hrs/wk Industry: Advanced Manufacturing Location: Stonehouse, Gloucestershire Salary/Rate Expectations: £14.00 to £16.00/hr + Overtime Profile – Electrical Assembler My client is a world leader in the provision of highly advanced technical solutions to Energy sectors. They are currently looking for an Electrical Assembler to join their team based at their modern fit for purpose facility. Candidates will have the opportunity to work in an environment where investment is continuous and substantial, technology is leading edge, teamwork is at the forefront of all they do, and personal development is encouraged at every stage. This is a fantastic opportunity to join a company that pride themselves on delivering high quality superior products to their sector. Duties – Electrical Assembler • Soldering, crimping and general wiring skills • Electro-mechanical assembly • Use of hand tools • Fault finding • Work in accordance with engineering diagram and schematics • Support Lean and 5S Improvements Skills/Experience – Electrical Assembler • Experience working in Assembly environment • IPC certified Candidates who are currently an Assembler, Electronics Assembler, PCB Assembler, Electrical Assembler, Production Operative, Manufacturing Operative and Technician could be suitable for this position. To make an application for this role please submit your CV to or for more information call 01453829529. For details of other opportunities available within your chose field please visit our website Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. TPBN1_UKTJ

Job title: Mechanical Fitter Location: Nailsworth Mills Estate, Avening Road, Nailsworth, Gloucestershire, GL6 0BS Hours: 07:30 – 16:30 Monday – Thursday, 07:30 – 14:00 Friday – 40 hours a week Reporting to: Operations Manager Rate: £30000, 15 hours overtime a week available at time and a half Are you a mechanical fitter looking for you next opportunity, a chance to build your career in a key engineering client. The client’s workshop is at Naislworth, and they design and build bespoke refuelling vehicles for various industries. Mechanical Fitter Duties: Complete engineering duties for sub-assembly production fitting and final assembly Assemble mechanical, electrical, pneumatic, hydraulic and electronic components and sub-assemblies as required Assist with the production and build of fabricated assemblies of varying size and complexity from scratch using general skills including marking out, cutting, folding, pipe bending, weld joint preparation, hydraulic runs, Pneumatic runs and general production build assemblies. Mechanical Fitter Requirements Solid engineering background Working from manufacturing drawings, general arrangement drawings and sub-assembly drawings A keen eye for detail and teamwork are two key elements in this role. Using a variety of hand and power tools to assemble a wide variety of large and small fabricated components Check the complete assembly for alignment, dimensions and quality Experience of vehicle fabricating/fitting an advantage Ability to work on own initiative with a good Problem solving and a logical mind. Circuitry knowledge of pneumatics, hydraulics and electrics A background in Aviation, Military, Marine or similar is advantageous. If you’re a Mechanical Fitter looking for your next opportunity, please click to apply

The Mechanical Manufacturing Engineer is responsible for complex electronic assemblies. Performing the lead role in implementing manufacturing processes and techniques using LEAN and Six Sigma tools. Experience Min BSc or BEng in Mechanical, Industrial Engineering or similar. Manufacturing especially Electronic assembly Lean and Six Sigma Production Workflow Non-Conformance Management Technical Investigation Support Production Test and Assembly Manufacturing Resource Planning System Responsibilities Lean Six Sigma Responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization. Processes Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity. Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs). Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc. Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality. Monitoring and reducing process costs. Quality Responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues

Production Manager £55,000 - £65,000 Stroud A new and exciting opportunity has arisen for a Production Manager for a company in the Stroud area. With no day ever being the same the Production Manager role offers an opportunity to perform as part of the senior leadership team and offers career development within a first-class organisation. Key Responsibilities • Plan and schedule production to meet delivery and quality targets. * Oversee daily shop floor operations including fabrication, machining and assembly. * Manage and develop production teams and supervisors. * Monitor productivity, identify issues and implement improvements. * Ensure compliance with quality standards and engineering specifications. * Maintain safe working practices and ensure regulatory compliance. * Coordinate with engineering, maintenance, procurement and planning teams. * Control production costs and optimise use of materials, labour and equipment. Key Skills • Strong understanding of heavy engineering and manufacturing processes. * Production planning and process improvement. * Team leadership and people management. * Problem solving and operational decision making. * Knowledge of lean manufacturing and continuous improvement methods. * Cost control and efficiency management. * Experience with ERP/MRP production systems. * Good communication and cross-functional coordination Package • £55,000 - £65,000 * Monday - Friday * Profit Related Bonus If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Position: Mechanical Fitter Location: Stroud, Gloucestershire Salary: £30,000 - £35,000 per annum My client is a leading designer and manufacturer of refuelling solutions and systems for a range of industries including Marine, Aviation and Defence. They are now looking to hire several Mechanical Fitters to join their established team in Stroud. The ideal candidate will come from an Assembly and Production background, will be highly proficient with Hand and Power Tools and will have experience of Hydraulic and Pneumatic systems. Mechanical Fitter Job Overview Completing Engineering duties for sub-assembly production, fitting and final assembly Assembling Mechanical, Pneumatic, Hydraulic and Electronic components Assisting with the build of fabricated assemblies Using a variety of hand and power tools in assembly and quality assurance Marking out, cutting, folding, pipe bending and weld joint preparation as well as completing Hydraulic and Pneumatic runs.Mechanical Fitter Job Requirements Previous experience in a Fitting / Assembly position Able to work from Engineering drawings / schematics Circuitry knowledge of Hydraulics, Pneumatics and Electrics Defence or Aviation background would be beneficial Knowledge of basic electrical assembly and the ability to read circuit drawings would be advantageous Based within a commutable distance of StroudMechanical Fitter Salary & Benefits Salary: £30,000 - £35,000 Monday to Thursday 07:30 - 16:30, Friday 07:30 - 14:00 (40 hours) 31 days holiday inclusive of bank holidays 2 Company bonus schemes Pension Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for

We are seeking a skilled Mechanical Fitter to join our clients team. In this role, you will be responsible for producing high-quality products to the required standards, as defined by drawings, written instructions, and guidance from the supervisor. Key Responsibilities: - Complete engineering duties for sub-assembly production, fitting, and final assembly - Assemble mechanical, electrical, pneumatic, hydraulic, and electronic components and sub-assemblies as required - Assist with the production and build of fabricated assemblies of varying size and complexity, using general skills such as marking out, cutting, folding, pipe bending, weld joint preparation, hydraulic runs, and pneumatic runs - Comply with the company's health and safety policies and procedures, ensuring your own safety and that of others - Perform any other duties as reasonably expected by the company Required Skills and Qualifications: - Solid engineering background with experience working from manufacturing drawings, general arrangement drawings, and sub-assembly drawings - Proficiency in using a variety of hand and power tools to assemble a wide range of large and small fabricated components - Ability to check the complete assembly for alignment, dimensions, and quality - Experience in vehicle fabricating/fitting is an advantage - Strong problem-solving skills and a logical mindset - Knowledge of pneumatics, hydraulics, and electrical circuitry - Background in aviation, military, marine, or a similar industry is desirable - Basic electrical assembly skills and the ability to read electrical circuit drawings are preferred but not essential This role is working Days, Monday-Friday and offers a competitive salary with bonus incentives. If you are an experienced Mechanical Fitter with a passion for delivering high-quality work, we encourage you to apply for this exciting role. Should this role be of interest, please submit your CV to Barry Salters, Email - Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included

Were looking for hands-on, reliable candidates to join our client in Stonehouse as Cable Assemblers . This role involves building a range of cable products using hand tools and machinery, working from written instructions and customer drawings. Its a clean, organised environment with supportive teams and long-term opportunities. Contract: 12-week Temp to Perm Hours: MondayThursday: 07:3016:15 Friday: 07:3012:15 (early finish) Breaks: 15-minute lunch + two 10-minute paid breaks Key Responsibilities Assemble cables, looms, and harnesses to customer specifications Carry out hand and machine crimping Follow written instructions and drawings accurately Perform basic inspection and quality checks Maintain a tidy and safe work area Work efficiently to meet daily production targets Skills & Experience Previous cable or wiring assembly experience is beneficial Soldering skills are a strong advantage Good manual dexterity and attention to detail Ability to follow written instructions and technical drawings Reliable, punctual, and a strong team player TPBN1_UKTJ

PE Global is currently recruiting for an Electronic Manufacturing Technician for a leading multi-national technology client based in Stonehouse, Gloucestershire. This is permanent opportunity. Working hours 7:00 am until 2:30 pm. There will be no shift work, however, overtime may be required. Salary: 28-32K depending on experience Duties of the role/Responsibilities • You will be responsible for test, fault finding, and repair of various electrical and electronic systems and components. • You’ll be working with the production team to help in the completion of tasks, including tool assembly, calibration, and testing with the production team comprised of assemblers, Mechanical manufacturing Technicians, and supervisors. • You will be delivering a range of electrical and electromechanical tools. • You’ll be testing electrical and electromechanical tools based on the procedure and interacting with MRP systems (SAP). • You will also be responsible for maintaining and repairing the test equipment used to test tools. Education/Experience • Further education in Electrical or Electronic engineering (e.g ONC, HNC, HND, NVQ Level 2) • Proven ability to work successfully within design constraints. • Experience using electronic lab equipment (Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply (up to 400VDC), etc) to make measurements on and for test and debugging of electromechanical assemblies • Good competencies with electronic technician tools and general test equipment. • Capable of producing deliverable items from full drawing packs with minimal additional help to relevant IPC standards. • Good electronic technician skills. Experience in; testing, low and high voltage experience, basic soldering, crimping, and assembly. • Basic fault finding and rectification at system and component level. • A good team player Interested candidates should submit an updated CV. Please click the link below to apply. Although it is not possible for us to respond to all applications, we at PE Global will do our upmost to give you feedback on your application. You have sent your Cv into us as a company and even though you have sent your CV to a particular position, we are making the reasonable assumption that you are active on the job market and as part of our normal recruitment service we will discuss other suitable positions with you. You are free to opt out of this so please specify in your application to us if you just want to be contacted in relation to a specific vacancy. Your Cv is sent to a central recruitment inbox which a number of people in the applicable PE Global division have access to and so this means that you might not be contacted by the named person in this advert

ADEY, the market leader in the provision of residential water treatment products for closed loop heating and cooling systems in the UK, is looking for a Production Engineer to join the team. Working for the Stonehouse Engineering department, Production Engineers are responsible for end-to-end development and implementation of production assembly processes, providing operational support, troubleshooting and maintaining equipment, coordinating engineering change control, and delivering continuous improvement to meet production, quality, and compliance objectives. On-Site in Stonehouse, Gloucester. The Role Daily Production Support & Continued Improvement * Manage production equipment using 6S principles; perform scheduled preventative maintenance; provide first-line breakdown support including root cause analysis and escalation to maintenance as required. * Actively support daily management routines and lead/participate in Lean activities including Kaizen events, Gemba walks, waste reduction initiatives, and continuous improvement workshops. * Performance Analysis: Conduct time and motion studies; measure and analyse KPIs such as OEE, downtime, and performance; implement improvements and corrective actions to remove bottlenecks and increase throughput. * New Product Implementation and Engineering Changes. * Process Development: Develop and implement assembly processes for new products; plan and execute pilot runs, validate process capability, and scale to full production. * Design for Manufacture: Collaborate with design teams to ensure DFM principles are applied and aligned with existing production cell configurations and assembly equipment to meet defined production metrics. * Risk and Failure Analysis: Participate in DFMEA and PFMEA activities to identify and mitigate product and process risks. * BOM Management: Create and optimise BOMs for production assembly and identify requirements for external sub-assemblies. * Assembly Tooling and Equipment: Design or specify jigs, fixtures and tooling in partnership with R&D; identify, source and procure equipment from external suppliers. * Product Launch Support: Provide close support during try-out builds through first production runs, capturing and acting on production feedback at each stage. * Training and Documentation: Produce WKINs and training materials; deliver operator and support staff training; maintain training matrices and ensure knowledge transfer to production teams. * Spare Parts Ownership: Generate critical spares lists for new equipment, classify and propose a sourcing strategy for each. * QHSE Compliance: Ensure processes meet quality, health, safety, environmental and regulatory requirements. * Change Management: Manage changes of existing products through the Engineering Change * Request (ECR) process, applying the same core responsibilities listed above to ensure minimal disruption to the business. * Product Sunset and End of Life: Manage the planned withdrawal of products from production, plan safe decommissioning of production tooling and equipment; manage asset disposal or redeployment. Update all documentation accordingly. Other Duties * Site Visits: Travel to assembly facilities and suppliers in the UK and overseas as required. * Ad hoc Support: Undertake tasks as directed by the line manager to meet business needs. The Person We’re looking for someone with a minimum of three years’ experience in production or process engineering within a production assembly environment, who has applied Lean methodologies in practice and been actively involved in NPI and ECR processes. Other required experience includes: * Bachelor’s degree or HND in Mechanical, Industrial, Manufacturing, or related engineering discipline * Mechanical knowledge (jigs, fixtures, assembly tooling) enabling ability and confidence to complete basic maintenance tasks * Ability to read engineering drawings * Proficient in Microsoft Office and familiar with BOM management systems * Strong written and verbal communication; ability to produce clear documentation and deliver training * Effective, diplomatic and confident communicator at all levels * Detail‑oriented, adaptable, proactive problem solver with a strong work ethic and consistent punctuality The Benefits * 25 days holiday, plus bank holidays * Pension contribution matched up to 8% * Life Assurance 3x base salary * Private health scheme * Genuit sharesave scheme

The Manufacturing Engineer is responsible for complex electronic assemblies. Perform the lead role in the implementation of LEAN manufacturing processes and use of Six Sigma tools. You will become an expert in the manufacturing processes, train shop floor personnel and monitor key metrics. Also solve complex manufacturing problems and take an active role in troubleshooting quality and production yield related issues within manufacturing. Key skills Min BSc or BEng in Electrical, Electronic, Industrial Engineering (or similar) Manufacturing especially Electronic assembly Lean and Six Sigma Production Workflow Non-Conformance Management Technical Investigation Support Production Test and Assembly Manufacturing Resource Planning System Role responsibilities Lean Six Sigma, responsible for the implementation of key elements of Lean, such as: standardised work instructions, line balancing, layout and work sequence (routing) optimisation, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimisation. Processes Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity. Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs). Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc. Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality. Monitoring and reducing process costs. Quality, responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues

Manufacturing Technician to maintain production tools and equipment also troubleshoot product, process or program defects and repair them. Key skills Read blueprints, identify components, perform wire preparation, stripping and crimping; perform harness repair and termination; use pertinent manual hand tools. Electronics, hydraulics and mechanical assemblies, automated machine operation and programming. Basic knowledge of Low Voltage and High Voltage Electronics. Lean Six Sigma Production Workflow Production Test Production Assembly

A technical recruitment agency is seeking an experienced Assembly Technician to support operations in the aerospace sector.

Production Operative – Final Assembly. Experience in a Manufacturing/Production Environment and electrical knowledge or previous assembly experience would be a distinct advantage but not essential as full training can be given to the right applicant. CARBOLITE GERO makes a significant contribution

A leading engineering firm in Staverton is seeking an experienced Production Manager to oversee manufacturing operations. Ideal candidates will have experience in managing production environments, knowledge of CAA regulations, and a commitment to continuous improvement.

We are currently looking for Production / assembly operative in high Wycombe and Amersham. Assembly work - Putting the seat belts together and other general assembly duties. Production work general production work.

My client is looking for ongoing Assembly staff, with good hand dexterity and attention to detail for immediate start.

As the Assembly Manager, you will lead a team within the Assembly department, ensuring production targets are met, workflows run smoothly, and quality standards remain consistently high. As part of their ongoing growth, we are looking for an Assembly Manager to join their fast‑paced assembly opera

A leading water solutions company in West Lancashire is seeking a Production Operative to work in our busy factory.

A recruitment agency is seeking a Production and Assembly Operative in Whitchurch, Hampshire.

A leading manufacturer in the UK is seeking a Production Fitter to join their assembly team in Worksop. Candidates should have prior experience working in a production or manufacturing environment.

A leading recruitment agency in the UK seeks Assembly Operatives for a busy factory in Warrington. Ideal candidates have experience using hand and power tools and are comfortable working to production targets.

Apply now to join Avidity Science as a Production Assembly Technician in Long Crendon. Join Our Team as a Production Assembly Technician at Avidity Science!. Production Assembly Technician.

We're currently recruiting a part time Cleaner to join our cleaning and facilities teams for Defence, contracted to 25 hours per week.As one of our dedicated Cleaners, you will help to deliver on our promise to always create the best and brightest experiences for our clients and customers.If you're

Work, Grow, Play! Here at Village Hotel Club we are all about embracing personality, individualism and fun.Forget stuffy hotels built around formality, pomp and ceremony.We create lively, modern spaces for our guests to work, eat, relax, play and exercise.With hotels and leisure clubs Aberdeen to Bo

Accommodation Cleaner - Hayling Island - Hayling Island, Hampshire .Job title – Accommodation Cleaner.Location – Meadow Bay Villages, Hayling Island Holiday Park, Hayling Island, PO11 0QS.Part Time, Seasonal, Mondays & Fridays with possible overtime.We are looking for part time accommodation

Type: Full-time / Part-Time / Seasonal.Join our One Great Team here at Haven as a Venue Cleaner, where you'll help create spotless, welcoming spaces for our guests to enjoy their next adventure!.We're seeking reliable, detail-oriented team members to keep our holiday park facilities shining.If you t

Monday – Thursday: 07:30 – 17:00.We are seeking a reliable and detail-oriented General Operative to join our team in a finishing role.You will be responsible for ensuring products are completed to a high standard before dispatch.

Rccn are looking for a Cleaner to work at.We are seeking a dedicated and reliable Cleaners to join our team.The ideal candidate will play a crucial role in maintaining cleanliness and hygiene in various environments, ensuring that all areas are tidy, organised, and welcoming.Perform general cleaning

Job Opportunity: School Cleaner – Stamford.We are looking for reliable and experienced.Extended Evening: 4:30 PM – 8:30 PM.Early Morning: 6:30 AM – 9:30 AM.Holiday & Half-Term Flexibility:.During summer breaks and half-term holidays, we offer flexible scheduling between 7:00 AM – 6:00 PM.Own

Job Specification - Production Operative As a Production Operative, your responsibilities will include: * Setting up, cleaning, and operating bottling, filling, and labelling equipment while ensuring efficiency. The Company – Production Operative Linkster is currently recruiting for a res

In this role you will be wiring, soldering, box building and running machinery within a tight-knit production team. Training will be given through on-the-job with senior members of the staff and production management.

OTE) + Regular Overtime + Monthly Bonus + Insurance + Progression.Do you have a Mechanical Assembley/Fitter background or similar looking for a workshop-based position in a growing business that offers multiple opportunities for progression, continuous training, generous monthly bonuses, and regular

We are a leading UK wholesaler with.We are currently looking for a.This is a varied role combining.Competitive salary: Up to £27K Basic.Bank Holidays (increasing with service).Training and development opportunities.Pension scheme and life assurance.

Assembly - Gloucester - Temporary with the possibility of going permanent - £13.

This role will involve operating and monitoring machinery, ensuring production runs smoothly, and carrying out quality checks. Operate and monitor bagging machinery to ensure efficient production.

As a committed, hard-worker, you'll do vital jobs to the highest standards and make sure your store is always in tip-top shape.It'll see you tackle things like removing litter and debris from the car park and loading bay.Washing external windows and glass doors until they sparkle.Or making sure the

Why apply for this PCB Assembly Operative role? You'll enjoy a range of great benefits designed to support you both professionally and personally: Salary of £27,000 - £30,000 You'll work on a variety of innovative and exciting projects You'll gain exposure to the latest tec

If youve also worked in the following roles, wed also like to hear from you: Machine Operator, Manufacturing Operative, Process Operative, Production Technician, Factory Assistant, Production Assistant, Warehouse Operative, Manufacturing Technician, Manufacturing Assistant. Production Operative / Ma

We are looking for a Warehouse Operative to assist our busy client, based in Yeovil.This will be working for a large logistics company to help them to move parts from one building to another.This is a temporary role that will be for approximately 4 weeks.This role is mainly moving parts, but you wil

Door Assembler / Production Operative - Temporary with the potential for a permanent opportunity - Gloucester - £12. We have an exciting opportunity for an experienced Door Assembler / Production Operative to join a small and friendly manufacturing company based in Gloucester. The successful D