Production assembly jobs in WallsendCreate job alerts

Baltic Recruitment are delighted to be supporting our market leading manufacturing client with their search for a Production Engineer. Job Purpose: • A key role within the business managing the whole production process, making sure everything runs smoothly and effectively., • Making key improvements to manufacturing processes throughout the business., • Ownership/Continuous improvement of existing machines/processes., • Selection of new assembly processes/techniques., • Specification/Development of new equipment/tooling., • Defining new and existing production procedures, finding ways to reduce costs and maximise efficiency while maintaining product quality., • Train staff in new and existing processes., • Collaborate with design engineers and management in developing new manufacturing processes and technologies., • Machine/process introduction including: Supplier selection, Ergonomics, PFMEA, Concept Design, Cycle time achievement and reduction, Factory layout, Technical files and operating instructions, Support for production and Maintenance teams., • Resolving Quality Issues highlighted by shop floor and seeking corrective actions via Purchasing from suppliers as required. Liaise with other departments as required if design or BOM changes are required., • Minimum of HNC/HND Standard or equivalent., • Min 5 years' experience in similar industry or some automotive experience preferred., • Technical background, with hands-on experience in designing and setting up production lines for new processes., • £35,000 - £45,000 per annum depending on experience., • Paid overtime., • Working Hours are 9am - 5pm Mon-Fri - can be flexible on this., • Company Pension., • 25 days holiday., • 6 month Probationary Period.

NDT Electronic Services Ltd (NDTE) is the UK’s leading specialist in sales, service, repair, instrumentation calibration, and planned maintenance of industrial radiography Non-Destructive Testing (NDT) equipment and systems. We are looking for a high calibre Electrical or Electronic Engineer who enjoys fault finding properly, solving complex problems, and working on specialist equipment not found in most engineering environments. This is not a repetitive production role. You will be working on specialist industrial radiography and NDT equipment, carrying out diagnosis, repair, calibration, and commissioning both in our workshop and occasionally on customer sites. If you are the type of engineer who enjoys getting to the root cause of faults rather than swapping parts, this role will suit you. The role • Diagnose, fault find and repair electrical, electronic and electro-mechanical systems, • Work on specialist radiography and NDT equipment used in industrial environments, • Carry out calibration, testing and commissioning of systems, • Undertake planned and reactive maintenance both in the workshop and on site, • Produce clear and accurate technical reports and documentation, • Support customers and act as a professional representative of the business when on site, • Contribute to improving processes, reliability and technical standards What we are looking for • Strong electrical or electronic engineering background with hands-on experience, • Proven ability to fault find on industrial equipment and control systems, • Experience working with PLC-based systems and industrial machinery, • Ability to read and interpret schematics and engineering drawings, • Comfortable working independently and taking ownership of problems, • High personal standards and a safety-first mindset Experience in some of the following would be advantageous • Instrumentation and calibration, • Board-level or component-level diagnostics, • Mechanical fitting and assembly work, • Functional safety systems What you will get • Varied and technically interesting work, not repetitive production, • Exposure to specialist and niche equipment, • A stable, growing business with long-term opportunities, • Ongoing development and the chance to broaden your technical capability, • A team that values doing things properly and takes pride in its work Additional requirements • Full UK manual driving licence, • Ability to obtain security clearance, • Ability to provide consistent employment history

Role: Project Quality Manager\n\nLocation: Remote working with travel to Dublin and Germany\n\nStart Date: ASAP\n\nDuration: December 2028\n\nPay Rate: DOE\n\nOUTSIDE IR35\n\nJob Profile - Project Quality Manager\n\nPosition in Organization\n\nReports to the Project Lead\n\nLiaises directly with Customers and Customers' Representatives.\n\nLiaises with Suppliers on Quality matters\n\nLiaises at all levels internally to ensure Quality Requirements are achieved.\n\nLimits of Authority\n\nRepresents our client on quality matters at meetings with Customers / Customers' representatives.\n\nRepresents our client on quality matters with Suppliers.\n\nAuthority to produce Quality Documentation on behalf of the business.\n\nKey Responsibilities\n\nInterface with Customer to ensure all Quality Requirements are understood and added to controlling documentation as required.\nManage contract deliverables liaising with Engineering, Supply Chain Management, Manufacturing and Projects as necessary.\nWork with Engineering to ensure Quality Requirements are documented and updated to ensure Design intent is achieved and validated.\nProduce and manage Project Quality Plans ensuring all inspections and tests are carried out during Engineering, Procurement, Manufacture and Assembly stages.\nEnsure that all Siemens Energy and Customer Witness Hold Points and Quality Record requirements are added to relevant Inspection and Test Plans.\nRequest Suppliers to produce Inspection and Test Plans for the control of Quality Inspections, Hold Points and Records for supplied goods.\nCarry out Quality Reviews at Suppliers & ensure Quality Documentation submitted by the Supplier is complete and in compliance with contract.\nAttend as Siemens Energy Quality Representative at internal meetings and external meetings with Customers.\nManage the attendance of Customers' Representatives at identified stages of manufacture ensuring signoff of Witness Hold Points are documented.\nControl ATEX requirements during equipment installation including the production of necessary documentation to demonstrate compliance.\nManage PED requirements including pressure equipment categorization and conformity assessment liaising with approval authorities where necessary to ensure compliance.\nManage NCRs including the validation of corrections and ensuring RCAs and Corrective Actions are completed and documented in preparation for Lessons Learned.\nSupport Customer audits, inspections and regulatory visits.\nProvide Quality Status Reports to Project Management.\nReview work content to ensure any Special Process ie Welding, NDT, Painting, Lifting requirements are pre-approved, activities and certifications are validated and relevant records produced.\nRevision Service ITPs to reflect changes emerging during project.\nManage the compilation of a Manufacturing Record Book (MRB) for submission to the Customer as a permanent record of project quality.\n\nSkills & Competencies\n\nStrong understanding of ATEX, PED, and ISO 9001. Ability to read and interpret engineering drawings and specifications. Strong leadership, communication, and stakeholder management skills.\n\nQualifications & Experience\n\nEssential: Significant experience managing of Major New Build Projects in Power Generation or similar Industries. Practical experience of ATEX and PED.\n\nDesirable: HND / Degree in Engineering; Lead Auditor qualification; formal ATEX / PED training; experience interacting with Approved Bodies.\n\nRullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants

JB Components Ltd is looking for a skilled Fabricator to join our team in Gateshead. We manufacture a wide range of fabricated products for the transport and engineering industries, including aluminium components, fabricated assemblies and bespoke products. In the future, we are looking to diversify our product range, so experience gained in other industries would be welcomed. This is a hands-on workshop role working with sheet metal and predominantly aluminium, producing high-quality fabricated parts from engineering drawings. You will be involved in the full fabrication process from cutting and forming through to final assembly. We are looking for someone who takes pride in their work, has strong attention to detail and enjoys working as part of a small, supportive team. Key Responsibilities * Fabricate components from engineering drawings * Cut, form and assemble sheet metal parts * Operate workshop equipment including press brake and guillotine * Use hand and power tools to complete fabrication tasks * Measure and inspect parts to ensure accuracy and quality standards * Assemble fabricated components into finished products * Carry out quality checks before products leave the workshop * Maintain a clean and safe working environment * Work with colleagues to improve efficiency and production flow Skills & Experience * Experience in sheet metal fabrication * Ability to read and w...

Baltic Recruitment are delighted to be supporting our market leading manufacturing client with their search for a Production Engineer. Job Purpose: • A key role within the business managing the whole production process, making sure everything runs smoothly and effectively., • Making key improvements to manufacturing processes throughout the business., • Ownership/Continuous improvement of existing machines/processes., • Selection of new assembly processes/techniques., • Specification/Development of new equipment/tooling., • Defining new and existing production procedures, finding ways to reduce costs and maximise efficiency while maintaining product quality., • Train staff in new and existing processes., • Collaborate with design engineers and management in developing new manufacturing processes and technologies., • Machine/process introduction including: Supplier selection, Ergonomics, PFMEA, Concept Design, Cycle time achievement and reduction, Factory layout, Technical files and operating instructions, Support for production and Maintenance teams., • Resolving Quality Issues highlighted by shop floor and seeking corrective actions via Purchasing from suppliers as required. Liaise with other departments as required if design or BOM changes are required., • Minimum of HNC/HND Standard or equivalent., • Min 5 years' experience in similar industry or some automotive experience preferred., • Technical background, with hands-on experience in designing and setting up production lines for new processes., • £35,000 - £45,000 per annum depending on experience., • Paid overtime., • Working Hours are 9am - 5pm Mon-Fri - can be flexible on this., • Company Pension., • 25 days holiday., • 6 month Probationary Period. JBRP1_UKTJ

A fantastic job opportunity has arisen for a Manufacturing Engineering Manager in East Sussex. My client is a global centre of excellence, specialising in the design and manufacture of electronic controllers, instrumentation, and drives. The role as the Manufacturing Engineering Manager in East Sussex will be leading the NPI Development team and will be responsible for liaising with the relevant design staff to ensure the overall quality and delivery of new parts, to the highest standards. You will also work to ensure the proposed design concepts can be manufactured cost-effectively. You will oversee the prototype build of products in question, prepare relevant documentation and actively participate in PFMEAs (Process Failure Mode Effects Analysis) and DFMEs (Design Failure Mode and Effect Analysis). This role will also require you to work with Operations personnel to allow for the optimisation and layout of the assembly areas, as well as the assembly tooling used in the NPI build. The Manufacturing Engineering Manager must have experience with PCBA and leading a manufacturing or production team. As Manufacturing Engineering Manager in East Sussex, you will have experience in a New Product Introduction (NPI) and New Product Development (NPD) role within electronics assembly, and/or PCB/cable assembly or electronics box build as well as experienced in the use of ERP/MRP systems (SAP Preferable). You will also have an Engineering Degree or equivalent and provable experience in a similar position. Awareness of all types of electronic printed circuit assembly techniques is beneficial. My client are a Market Leader who combine over 30 years of experience within the Electronic engineering with the attitude and opportunity of a start-up company. APPLY NOW for the Manufacturing Engineering Manager East Sussex job, or to apply for similar jobs, by sending your CV to , otherwise, we always welcome the opportunity to discuss other production jobs on 01582 878 810 or 079317 88834. JBRP1_UKTJ

Mechanical Fitter - Special Purpose Machinery Bognor Regis, West Sussex | Permanent 39-hour week (Monday-Thursday 7:30am-4:30pm, Friday 7:30am-12:30pm) | £19.50/hour I'm recruiting on behalf of a well-established UK machine builder specialising in the design and manufacture of bespoke automation and special purpose machinery supplied to customers worldwide. Due to continued growth, they are looking to add an experienced Mechanical Fitter to their engineering team. The Role This is a hands-on, workshop-based position focused on the mechanical build of custom-built machinery, from sub-assembly through to final build and test. Key responsibilities include: * Mechanical assembly of special purpose machinery from engineering drawings * Building frames, guards, rollers, shafts, bearings and mechanical assemblies * Setting and aligning components to specification * Basic pneumatic fitting (cylinders, valves, pipework - training available) * Supporting machine build, testing and fault-finding in-house * Occasional assistance with installations (UK / overseas - infrequent) The Ideal Candidate * Proven experience in a manufacturing environment as a Mechanical Fitter or a similar role * Confident reading and interpreting mechanical drawings * Practical, methodical approach with strong attention to detail * Comfortable working independently and as part of a small engineering team * Apprenticeship or formal mechanical training advantageous What's on Offer * Permanent role with a stable, engineering-led business * 39-hour working week (day shift) * Varied work - no repetitive production-line fitting * Overtime available * Long-term opportunity with scope for development WR Engineering are the #1 recruitment partner for engineering, manufacturing & technical sales jobs. We recruit for permanent jobs UK wide. WR is acting as an Employment Agency in relation to this vacancy. JBRP1_UKTJ

Baltic Recruitment are delighted to be supporting a market-leading manufacturing company with their search for a Life Cycle Engineer. This is an exciting opportunity to join a dynamic and innovative organisation where you will play a key role in new product development and managing the full product life cycle. Key Duties: • Support the maintenance and improvement of existing products during their life cycle., • Engage in New Product Development., • Be the first link to QA when reviewing customer complaints against risk management, • Assist in activities arising from CAPA's associated with customer complaints., • Assist the Regulatory Department in the build and review of Technical Files., • To maintain comprehensive and accurate records of all work in the formats required., • Accept any reasonable request by the Management Team, after if necessary, negotiation., • Good standard of education up to degree level (or equivalent) in a design/engineering related discipline, with a minimum of 2 years' experience in a production environment., • Proven solid experience in a manufacturing and assembly environment., • An excellent working knowledge of Microsoft Office packages., • Solid ability to work with the following software: Solidworks; FastCad and Information retrieval software - eg Q-Pulse & Syspro., • Competitive salary depending on experience., • Day shift position, working Monday-Friday., • Pension scheme., • Health, • Death in service., • Perkbox., • Additional benefits. JBRP1_UKTJ

Job Title: Multi-Skilled Maintenance Technician Location:Skelmersdale Pay Rate:£19.50 per hour + 30% shift allowance Working Hours & Shift Pattern Rotating shifts, Monday to Friday: • Early:6:00am 2:00pm (MonThurs) | 6:00am 12:00pm (Fri), • Late:2:00pm 10:00pm (MonThurs) | 11:00am 4:35pm (Fri) Benefits:33 days annual leave after 12 weeks, pension, free car parking, the opportunity to work for a global company. Contract Length:1 year We are recruitingMulti-Skilled Maintenance Techniciansto join a busy manufacturing site inSkelmersdaleon a 12-month contract. This is an excellent opportunity for experienced maintenance professionals with strong electrical and mechanical skills to support high-volume, automated production lines. The successful candidates will play a key role in ensuring equipment reliability, minimising downtime, and supporting continuous improvement across production operations. Key Responsibilities as a Multi-Skilled Maintenance Technician: • Carry out planned preventative maintenance (PPM) and reactive breakdown repairs on production equipment., • Diagnose and rectify electrical, mechanical, pneumatic, hydraulic and control system faults., • Establish process conditions and perform in-line quality checks., • Monitor and control processes usingStatistical Process Control (SPC)methods., • Support production targets by ensuring equipment availability, quality and efficiency., • Maintain and improve procedures and maintenance systems., • Build strong working relationships with production and engineering stakeholders on site., • Minimum of2 years experience in machine maintenancewithin a manufacturing environment., • Time-served apprenticeship orNVQ Level 3 (or equivalent) in Electrical/Mechanical Maintenance., • Experience working withautomated assembly linesand robotics (ABB preferred; training available)., • Ability to read and interpret electrical and mechanical drawings., • Confident working to SOPs and formal training processes. JBRP1_UKTJ

Job Title: Electronics Design Authority Location: Portsmouth Broad Oak, hybrid, 4 days on site weekly We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £61,600 depending on skills & experiences + bonus scheme Who we are: Join BAE Systems and youll be part of something bigger. As a valued member of our global colleague network, youll bring your unique skills and perspectives to help pioneer progress and protect what matters most. Youll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, theres no limit to where a career at BAE Systems could take you. Role description: The role involves leading the full lifecycle of electronic assembly development, taking concepts from initial specification through to service release. This includes managing VHDL-based activities such as requirements analysis, coding, simulation, and IP integration, alongside performing rigorous design verification through advanced simulation, analysis, and testing methods. A key part of the work is the ongoing management of existing designs, including technology insertion initiatives and resolving PCB obsolescence challenges, while also generating high-quality technical documentation, design reports, and compliance evidence. In addition, the position requires hands-on integration and demonstration of complex system-level electronics and hardware, ensuring all work adheres to relevant safety legislation, engineering lifecycles, and customer expectations. The role supports peer reviews, design progress assessments, and collaborative engineering across multiple projects, while also contributing to commercial activities such as bids, proposals, and project estimation. Core duties: • Lead electronic assembly design and development from concept through to service release and support, providing technical leadership and mentoring junior engineers., • Demonstrate expertise in component-level electronic design using computer-aided engineering (CAE) tools for volume production, including obsolescence management and technology insertion., • Be proficient in circuitry design, digital-to-analogue (ADC/DAC) conversion, power-supply decoupling, and collaborating on EMC-compliant subsystems and PCB layouts., • Apply a rigorous approach to safety and legislative compliance, particularly for high-power and high-voltage equipment., • Substantial experience in design proving, system integration, and proactive defect investigation and resolution., • Provide robust technical evidence to support safety, fitness for purpose, and compliance, with strong understanding of FPGA design, power electronics, and advanced test and measurement techniques. Join the Archerfish team within the Underwater Battlespace unit, where the Underwater Electronics group drives the full lifecycle of electronics, from design and manufacturing to production and in-service support, covering obsolescence management and redesign for manufacturability. This role focuses on high-integrity electronics development, including VHDL design, coding, analysis, and simulation. The role and team ensure long-term operational success by managing technology insertions and obsolescence while maintaining full compliance with safety legislation and customer requirements. Why BAE Systems? Here youll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. Youll be recognised for your contribution and enjoy rewards tailored to whats most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: Were committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 10th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-JP1 #LI-Hybrid JBRP1_UKTJ

Project Engineer - Pumps/Rotating Equipment Bolton location (hybrid working) £35,000 - £45,000 plus bonus and benefits A Project Engineer is wanted on a permanent basis by a global client of ours who are at the forefront of their industry. The successful candidate will be heavily involved in the full Engineering project lifecycle, whilst having an in depth understanding of pumps, rotating equipment and working to fine tolerances. This is a permanent opportunity that includes a base salary of up to £45,000 plus bonus and benefits. Overview of the Project Engineer role: • Effectively handle all aspects of the quoting, bid clarification, order intake, production (using subcontract manufacture), expediting, and delivery of spare parts for non-standard pump spares., • Create BOM from data sheet produced by the technical department ensuring compliance with all customer specifications., • Following the production of the BOM, liaise with, and guide the Material Controller and CAD Designer to ensure that any new drawings required are produced to reflect the specific technical requirements of the project., • Provide guidance and advice during manufacturing, assembly and test processes associated with the production to ensure deliveries are made on time, by expediting the work as it progresses and re-prioritising if necessary. Key skills and qualifications required for the Project Engineer role:, • Strong experience with Pumps/Seals, ideally coming from a 'hands-on' Mechanical Engineering background (preferably within Mechanical Fitting/Mechanical Assembly), • Possess previous experience dealing with both internal and external stakeholders. JBRP1_UKTJ

ROLE: PVC PIPE FITTER LOCATION: SKELMERSDALE, LANCASHIRE PAY RATE: £20 - £21 per hour (depending on experience), overtime rate is set at time and a half of standard pay rate, up to 10 hours overtime available per week HOURS OF WORK: 7am 4.30pm, Monday to Thursday and Friday 7am 12pm. 30 mins unpaid lunch break. Overtime is paid after 42 hours. HG Recruitment are recruiting a temporaryPVC PIPE FITTER in partnership withour client based in SKELMERDALE, LANCASHIRE. Apply Now Join our team and start earning top rates. If you are an PVC PIPE FITTER - APPLY NOW * Expected annual earnings £43,680 ** JOB DESCRIPTION: PCV Pipe Fitter responsible for the Assembly and Installation of pipework in the workshop and onsite. Our client is a well-established Engineering business based in Skelmersdale, specialising in the bespoke design, build, install, commission and servicing of piping equipment. Offering its products and services to businesses across the North West. Due to company restructure the Company requires an experienced PVC Pipe Fitter and installations engineer to join the team. This is a 12-week temporary to permanent contract. Benefits: • Competitive Salary, • Weekly pay., • Overtime available., • 20 Days + Statutory Bank Holidays, • Pension and Life Insurance schemes, • Full Company Uniform, PPE, • Access to Company Vehicle and Tool Kit, • Working with clients and attending site as required to gain a full understanding of requirements and job specifications to ensure drawings, builds lists and other documents are accurate., • Reading and interpreting technical drawings and specifications., • Measuring, cutting, fabricating, and assembling various types of pipes (PVC and associated fittings)., • Installing, maintaining, and repairing piping systems., • Ensuring systems run effectively and are leak-proof., • Working with different types of systems, including plumbing, heating/cooling, and process pipework., • Create specifications and estimates as required for the production of builds and installation lists. Assistance with design drawings / documentation as required., • Responsible for timely and accurate system installations to include amongst other duties, installation of cable tray, ABS pipework, tanks, systems and ring mains. Working with other engineers during the commissioning stage. Attending follow up site attendances/call-backs., • Collaborated with engineering and site management teams to ensure compliance with design specifications and safety standards., • Minimum of 5 G.C.S.Es or equivalent including English and Maths, • City of Guilds/BTEC Qualification in Engineering discipline, • Full UK Driving Licence, • Experience of PVC Pipe fitting or System Assembly, working with hand tools, Lathes and Circular Saws etc., • Forward thinking, logical and methodical planner with a keen eye for detail., • Able to work to deadlines, motivated to succeed in a challenging environment and able to adapt to changing demands., • Committed to Quality (ISO 9001), Environmental (ISO 14001) and Health and Safety Requirements., • Flexible with change of plans. Decades of experience in the supply chain, HG has a strong well-established reputation. Offering great job opportunities withinEngineering Environments. With a Nationwide footprint, our manned service is available 24/7, trusted to always match you with the right job. ClickAPPLY NOW& join ourwinning team. HG are proud to be an equal opportunities employer and will never charge a fee for our work finding solutions. Members of disability confident, should you require specialist assistance to support you in the application process our team of supportive operatives will always be on hand to support you one to one. We have a zero-tolerance policy towards sexual harassment, as defined by theEquality Act 2010, and we take proactive steps to prevent it. HG Recruitment are proud to be champions against modern slavery and belong to Stronger Together. JBRP1_UKTJ

Design Engineer - Manufacturing Introduction Booth Dispensers Limited manufactures drinks dispense systems and provide bar and cellar parts to the hospitality industry. An opportunity has arisen to join the NPI and Engineering department as an experienced design engineer within this exciting and expanding business. As you would expect there will further opportunities for the right applicant to build and grow their careers with genuine prospects of further development within the business. Brief Job Description Working alongside a multi-disciplined team, undertaking electrical/mechanical product design and development activities for new & existing products. Supporting the production and manufacturing areas within the business. Forming part of the product design team to manage New Product Introduction (NPI). • Coordinate and manage projects, • Provide updates at team meetings, • Producing and updating BoM's for manufacturing and costs., • Producing high quality component and assembly design., • HND/Degree., • Good understanding of project management. Experience with MS Project (or similar) beneficial but not essential., • Experienced in 3D CAD software, Autodesk Inventor & Vault, or similar package., • Producing engineering drawings., • Sheet metal design., • Design for manufacture., • Understanding of Bills of Material and their creation., • Electrical knowledge (BS EN 60335, LVD etc.)., • Business Management Software (ERP & MRP)., • Lean principles., • A team player, appreciative of maintaining a positive workplace culture., • A multi-disciplined engineer with a pro-active and disciplined approach to work., • Good electrical and mechanical knowledge., • Ability to problem solve and work under pressure., • Creative thinker and strong problem-solving skills., • Excellent written and verbal communication skills, • A good working knowledge of Microsoft Office and other applications, • Understanding of design and production costs to include waste, downtime, scrap, and re-work, • Good level of understanding of quality control systems, workflow management and risk analysis., • Has knowledge of working to directives and standards ensuring product safety., • Confident in attending meetings at different levels of the business., • Desire to learn and develop., • Strong practical skills (essential for workshop activities) Salary:Dependent on Experience £30k - £36K Hours of work:38 hrs per week. Mon to Thursday 08:00 to 17:00, Fri: 08:00 to 12:00 Holidays:30 days holiday inclusive of the statutory bank holidays based on working a 4.5 day working week JBRP1_UKTJ

Consortium Professional Recruitment is delighted to be working exclusively with a well-established manufacturing business as they look to appoint an Electrical Design Engineer to join their Hull-based team. This is a fantastic opportunity to become part of a collaborative and forward-thinking design team, where you'll contribute to the development and continuous improvement of bespoke electrical systems for a range of complex build projects. The role offers variety, technical challenge, and a platform for long-term progression within a business known for innovation and investment in its people. Key Responsibilities: • Produce 2D wiring diagrams, 3D layouts, and assembly drawings, • Create and maintain accurate Bills of Materials (BOMs), • Work from job specs to develop electrical systems for build and assembly, • Ensure all designs align with internal standards and regulatory guidelines, • Liaise with production, engineering, and R&D teams to ensure smooth project flow, • Support drawing updates for continuous improvement and product development, • Assist during live production to clarify design intent and resolve issues Key Requirements:, • 3–5 years' experience in an electrical design role (ideally within a manufacturing or assembly environment), • Proficiency with AutoCAD 2021, • Familiarity with Autodesk Inventor and AutoCAD, • Strong understanding of electrical principles and system design, • Excellent communicator and confident working cross-functionally, • Highly organised, with the ability to manage multiple jobs simultaneously, • Working knowledge of Health & Safety and relevant compliance requirements Salary & Benefits:, • Circa £40,000 depending on experience, • 40-hour working week (Monday–Friday, days), • 32 days annual leave (including bank holidays) JBRP1_UKTJ

Machine Operators Location: Wallsend Shift Pattern: Rotating 2-shift (Monday - Friday) Pay Rate: £14.52 per hour (38 hours per week) Contract: Long-term ongoing opportunities The Role; We are currently recruiting for Machine Operators to join a busy manufacturing environment in Wallsend. The successful candidates will be responsible for setting up, operating, and monitoring machinery while ensuring all work is completed in line with company quality standards. Key Responsibilities; Set up, operate, and monitor manufacturing machinery Complete all relevant production and quality documentation Adhere to all Health & Safety regulations at all times Follow Standard Operating Instructions (SOIs) and Risk Assessments Support assembly and testing operations as required Ensure all tools and equipment are returned to their designated locations after use Carry out additional tasks as requested by the shift supervisor About You; Previous experience in a similar role within a heavy manufacturing environment Experience operating a range of manufacturing machinery Strong understanding of health and safety procedures Ability to follow instructions and work as part of a team Shift Pattern; Week 1: 6:00am - 2:00pm Week 2: 2:00pm - 10:00pm If you are interested and have the necessary experience please apply via the link provided. Kinetic plc is a Recruitment Consultancy with over 40 years' experience delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications confidentially and we review all submissions. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities. S&T1

Mechanical Design Engineer Our client in the Marine business is offering an exciting opportunity for a Mechanical Design Engineer to join their team at their office in Gateshead. As a Mechanical Design Engineer, you'll be at the forefront of the marine industry, applying your skills and experience in an environment where excellence is the standard. In this role, you will work as part of a multidisciplinary team designing specialist naval deck machinery, including winches, reelers, and cranes. You'll be involved throughout the entire product lifecycle—from interpreting customer requirements during tendering, through concept development and detailed design, to manufacturing support, testing, and installation aboard naval vessels. Additionally, you will lead and contribute to research and development initiatives, ensuring our products remain at the cutting edge of naval technology. The role Develop Mechanical Engineering solutions that fulfil client requirements. Progressing from requirements capture, through concept design to product development, commissioning and in-service support. Identify and develop R&D and Continuous Improvement opportunities. Investigate Safety and Technical problems using structured problem solving techniques. Work effectively within a multidisciplinary team. Provide technical reference / guidance to equipment suppliers, internal departments and customers. Manage supplier interfaces and provide technical assistance / approval to suppliers. Create technical design appraisal documents for submission to marine classification societies Manage Requirements, Risks, Assumptions, Interfaces and Issues during all design phases. The person BEng in a Mechanical Engineering discipline or equivalent technical capability based on practical knowledge and experience. Engineering experience relevant to this role. Experience of working in a highly regulated industry. Applicants with previous experience in the marine or offshore oil and gas industry are preferred. Experience spanning concept, product development and in-service (ILS) support. Experience of creation of equipment assembly arrangements and Engineering Bills of Materials using the company ERP/MRP system. Assessment of designs to ensure code compliance. Using both hand calculations and Finite Elements Analysis (FEA) to assess and optimise the product. Production of technical specifications, test procedures and technical manuals for marine application mechanical systems and components. Create technical equipment specifications, test procedures, design reports, test reports and service / instruction manuals in accordance with marine and military standards. Experience of product development with 2D and 3D CAD systems such as AutoCAD and Creo. Competent user of MS Office suite of programmes (Word, Excel, Outlook, Power-point etc.). Conversant with BS EN 8888 and BS EN 22553 for the production of drawings. Some of the contracts undertaken are for the UK Ministry of Defence and as such the successful candidate will be required to successfully attain UK BPSS or SC Clearance with no caveats. Please note that this might affect the offer process or employment. You are able to adhere to company rules and procedures and execute plans with commitment and determination demonstrate specialist knowledge and expertise in own area communicate in a clear, precise and structured way co-operate well with others, share knowledge, experience, information and support others in the pursuit of team goals Why join us An exciting and important position working for the world-leading supplier of maritime solutions Professional and personal development and career opportunities - including access to training programs and mentorship opportunities for continuous learning and career advancement. Competitive pay and benefits, including attractive insurance policies and pension schemes. We offer hybrid working arrangement

Senior Mechanical Design Engineer Location: Gateshead or Telford Job Type: Contract, Full-Time Primary Industry: Engineering Secondary Industry: Military and Defence Job Description The Senior Mechanical Design Engineer plays a crucial role within the engineering team, delivering advanced mechanical design solutions for defence-related projects. This position requires a high level of technical expertise in mechanical design, alongside a comprehensive understanding of military and defence standards. The role involves conceptualising, developing and refining mechanical components and assemblies, ensuring designs meet stringent performance, safety and quality requirements. The successful candidate collaborates closely with multi-disciplinary teams including systems engineers, manufacturing, quality assurance and project management to deliver robust and innovative mechanical designs. The role demands strong problem-solving skills, attention to detail and the ability to manage design activities throughout the full product lifecycle from concept to production support. Job Duties Develop and produce detailed mechanical design drawings, models and specifications using computer-aided design (CAD) software. Lead design reviews and provide technical guidance to ensure compliance with relevant military and defence standards. Perform mechanical calculations and simulations to validate design performance and reliability under operational conditions. Collaborate with cross-functional teams to integrate mechanical designs with electrical, systems and software components. Manage design changes effectively, ensuring traceability and documentation of all revisions. Support prototyping, testing and validation activities, analysing results and implementing necessary design improvements. Ensure all designs comply with health and safety regulations and industry best practises. Prepare and maintain technical documentation including bills of materials, assembly instructions and user guides. Contribute to continuous improvement initiatives within the mechanical design discipline. Mentor junior engineers and support their professional development. Required Qualifications Degree in Mechanical Engineering or a closely related discipline. Proven experience using 3D CAD software Siemens NX. Strong understanding of mechanical engineering principles, materials science and manufacturing processes. Familiarity with military and defence engineering requirements and standards. Demonstrable ability to produce high-quality technical documentation. Education Bachelor’s degree or higher in Mechanical Engineering or an equivalent engineering qualification. Experience At least five years of experience in mechanical design engineering within the defence or related engineering sector. Experience working on complex, safety-critical systems. Proven track record of delivering mechanical designs through full product lifecycle stages. Knowledge and Skills Excellent knowledge of mechanical design methodologies and best practises. Proficient in CAD modelling and engineering analysis techniques. Strong problem-solving skills with the ability to work independently and as part of a team. Effective communication skills, able to present technical information clearly to diverse audiences. Attention to detail and commitment to quality assurance. Ability to manage multiple priorities and meet demanding deadlines. Familiarity with relevant British and international engineering standards. Preferred Qualifications Membership of a recognised professional engineering institution such as the Institution of Mechanical Engineers. Experience with defence-specific design tools and simulation software. Security clearance or eligibility to obtain security clearance for work within the defence sector. Working Conditions The role is primarily hybrid office-based (3 days) with occasional visits to manufacturing or testing facilities. Standard full-time hours are expected, with some flexibility required to meet project deadlines. The position may involve working within a secure environment requiring adherence to confidentiality and security protocols. Travel within the United Kingdom may be necessary to support project activities or client meetings

A leading manufacturer in the UK is seeking a Production Fitter to join their assembly team in Worksop. Candidates should have prior experience working in a production or manufacturing environment.

A recruitment agency is seeking a Production and Assembly Operative in Whitchurch, Hampshire.

A leading water solutions company in West Lancashire is seeking a Production Operative to work in our busy factory.

A leading manufacturing company in the UK is seeking Production / Assembly Operatives to join their team. The role involves general assembly and production of safety restraints, with training provided for those with no experience.

A technical recruitment agency is seeking an experienced Assembly Technician to support operations in the aerospace sector.

A leading manufacturing company in Cramlington seeks an operator for the assembly and testing of hoses.

Production Operative – Final Assembly. Experience in a Manufacturing/Production Environment and electrical knowledge or previous assembly experience would be a distinct advantage but not essential as full training can be given to the right applicant. CARBOLITE GERO makes a significant contribution

A growing UK manufacturing company is seeking a Production Operative for a hands-on role in Waverley, Surrey, offering £14 per hour on a temporary contract.

A manufacturing company in Penshaw is seeking dedicated workers for assembling plastic and paper dispensers.The role involves quality checks, packaging, and labeling of products within a temporary contract, with potential for a permanent position.Shifts are Monday to Friday, alternating weekly betwe

A leading recruitment agency is seeking an experienced Production Operative for a client in the UK. Candidates should have experience in a fast-paced production environment and knowledge of Health and Safety practices.

A leading recruitment agency in the UK seeks Assembly Operatives for a busy factory in Warrington. Ideal candidates have experience using hand and power tools and are comfortable working to production targets.

A well-established automotive manufacturer in the UK is seeking an experienced Production Supervisor to lead its expanding team in Telford. The role involves managing production schedules, leading a team of technicians, and ensuring quality standards are met in a fast-paced environment.

A leading engineering firm in Staverton is seeking an experienced Production Manager to oversee manufacturing operations. Ideal candidates will have experience in managing production environments, knowledge of CAA regulations, and a commitment to continuous improvement.

A leading recruitment agency is seeking a Production Operative for permanent employment in Greater London.

Production / Assembly Operatives Required ASAP. The role includes general assembly and production of the safety restraints. Any assembly experience would be advantageous but not essential.

A manufacturing firm based in Birtley is offering a manual role focused on product assembly and quality inspection.

Apply now to join Avidity Science as a Production Assembly Technician in Long Crendon. Production Assembly Technician. Join Our Team as a Production Assembly Technician at Avidity Science!.

Production work general production work. Production Assembly Operatives required ASAP. We are currently looking for Production / assembly operative in high Wycombe and Amersham.

My client is looking for ongoing Assembly staff, with good hand dexterity and attention to detail for immediate start.

Accommodation Cleaner - Hayling Island - Hayling Island, Hampshire .Job title – Accommodation Cleaner.Location – Meadow Bay Villages, Hayling Island Holiday Park, Hayling Island, PO11 0QS.Part Time, Seasonal, Mondays & Fridays with possible overtime.We are looking for part time accommodation

Part Time- 4:30pm-7:30pm Monday-Friday.We are currently looking for a.General cleaning duties including sweeping, mopping, vacuuming, and dusting.Cleaning toilets, kitchens, and communal areas.Emptying bins and disposing of waste correctly.Replenishing cleaning supplies and consumables.Following hea

As a committed, hard-worker, you'll do vital jobs to the highest standards and make sure your store is always in tip-top shape.It'll see you tackle things like removing litter and debris from the car park and loading bay.Washing external windows and glass doors until they sparkle.Or making sure the

Duties will include: * Operating of machinery, which may require adjustments for smooth running * Flexibility willingness to pack and palletise * Work within a mixing department of raw materials * Working at pace Experience/Skills required * Machine Operating experience, with some setting

Job Description: Assembly Operator Liss Monday - Thursday 8:00am - 4:00pm Friday 8:00am - 2:00pm Factory Based RoleWe are currently recruiting for an Trimmer and End of Line Checker to join a busy manufacturing site based in Liss. You'll be working as part of a production team ensuring finished

Rccn are looking for a Cleaner to work at.We are seeking a dedicated and reliable Cleaners to join our team.The ideal candidate will play a crucial role in maintaining cleanliness and hygiene in various environments, ensuring that all areas are tidy, organised, and welcoming.Perform general cleaning

In this role you will be wiring, soldering, box building and running machinery within a tight-knit production team. Training will be given through on-the-job with senior members of the staff and production management.

The role involves mechanical assembly – using hand tools to measure and cut metal pipes – packing and general housekeeping of the production area. As Bench Assembler you will work within a small production team on a production line assembling equipment (no experience of assembling is req

Operate production machinery safely. Complete quality checks and meet production targets. Previous production experience preferred.

Work collaboratively with other team members and departments to meet production goals and address challenges. JARK Stevenage are currently looking for Production Operator to contribute to the manufacturing process by efficiently operating machinery, assembling products, and ensuring the quality and

Location: Gateshead and Various UK Sites.Hours: Monday to Friday, 7:00am start (Weekend work required when needed).Based in the Gateshead area with regular travel to other sites.Days: Monday to Friday (Must be flexible to work weekends as required).Travel time to other sites paid.Accommodation provi

Electronics Assembly & Test Technician Gateshead £30-35,000 Occasional UK & international travel required Security clearance eligibility required - Must be a UK Citizen The Opportunity A specialist engineering organisation working within the defence and security sector is looking for a