Safety engineer jobs in WesthoughtonCreate job alerts

As a Gas Construction Manager, you will manage the safe and efficient replacement of Gas mains within NW CMO delivery of works programmes for your business unit. You will be responsible for a working environment, which ensures the achievement of all safety and environment legislation, engineering and customer standards. You will provide operational leadership – ensuring that the work is delivered safely, on time, within budget and to our Client’s expectations. In addition to Health and Safety, customer service is critical. You will ensure that work is carried out in a manner which meets or exceeds customer expectations and adopts a ‘right first time’ approach. • You will be managing the Service Delivery Supervisor’s, Customer Liaison Officers and Local Delivery Partner(s) for your business unit / area to ensure that all work carried out reaches the required levels of safety and technical policies and procedures., • Ensure that all safety and environmental policies and procedures, legislative and statutory obligations are met., • Maintaining strong customer focus, to support and deliver market leading C-SAT (Customer Satisfaction) scores., • Responsible for workforce operational performance to ensure that all objectives are met and that problems are anticipated and resolved., • Ensure that all work is carried out according to NRSWA, and be responsible for effective liaison and collaboration with Highways Authorities, Local Authorities, and other Utilities etc., • Integrate new cost-effective working methods into work activities, whilst maintaining an effective employee relations climate, • Ensure that communications are delivered effectively so that all staff understand business strategy, objectives, standards of service and business performance (e.g. team talks), • Maintain strong customer focus, to support improved OFGEM score, • Monitor, meet and strive to exceed all business performance targets, • Promote and operate a culture of zero tolerance of accidents and self-inflicted incidents, • Continually monitor performance, utilising defined business measures and seeking continuous improvement through ways of working, • Manage their business unit to promote team working and collaboration, • Carry out the appropriate performance reviews and development of staff, defined by P&OD, • Ensure that Occupational Health requirements are implemented, • To be responsible for the Health, Safety and Environmental issues pertaining to direct reports including safe control of operations, permits and maintenance of ISO14001 accreditation, • Review investigations with HSE Representative completed by Site Delivery Supervisors, ensuring the root cause of the incident is identified and actions put in place to prevent reoccurrence, ensuring close out of all actions within agreed SLA, • Relevant Gas Qualification, • IGEM incorporated / technical engineer, • SHEA (Gas), • NRSWA 1991 (Supervisor), • SCO 1, 2, 4 & 5 (MR2), SCO 1, 2 & 5 (MR1), • IOSH, • NEBOSH (preferred), • NCO Gas Level 3, • ILM etc We offer a competitive salary based on experience along with a full benefits package. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy. Network Plus is an award-winning business delivering essential utility and infrastructure services for the UK’s major providers of gas, power, telecoms, transport, water, and wastewater. We value the variety of experience, perspective, and other points of difference our workforce, clients, and supply chain offer. We are actively working with colleagues across the Network Plus Group to develop an inclusive environment – we want all our employees to feel valued and included to enable everyone to thrive at work and understand the value of their contribution matters no matter their background, identity, or circumstances.

The Role:Working for a regional Plant Hire / Pump Hire company, you will be working as a Diesel Pump Fitter / Service Engineer – this is a mobile role, based in Wigan / North West. You will have previous engineering experience working on a range of Mechanical Diesel Plant equipment, including Large diesel driven Water Pumps. We are looking for someone who is familiar with working on Diesel Engines including strip down and rebuilds, previous experience working on water pumps would be an advantage. Whilst the position is permanent full time Monday - Friday, you will as a Mobile Plant Fitter be expected to be flexible and be on stand by for some of the time, for which you will be paid. Key Responsibilities:As a Mobile Plant Fitter / Service Engineer Your Job Role Would Include: • PDI’s, Servicing & Repairing Pump Hire Equipment, • Attend Client Sites to Repair and Service Industrial Water Pumps, • Fit Accessories as Required, • Work Well Under Pressure, • Complete Administration Tasks including Service & Repair Records Accurately, • Present a Professional and Positive Attitude when working on Customer Sites, • Previous Experience in One or More of The Following Roles: Service Engineer; Mobile Service Engineer; Plant Fitter;, • You Will Need Previous Experience within the Plant / Pump Hire and Construction Equipment Industry, • Analytical Approach To Problem Solving, • Able to Work Without Instruction, • Own Tool Kit, • Basic IT Skills, • Good Communication Skills, both Verbal & Written, • Permanent Full Time Position, • Monday - Friday Standard Working Week, • Overtime Pay, • Service Vehicle, • 23 Days Holiday + Bank Hols, • 40 Hour Basic Week (7.00am - 4.00pm), • Annual Bonus, • Life Assurance Please follow the link below to apply.

Start Your Career as a Trainee Field Service Engineer with Hotpoint Are you ready to launch a hands-on career with one of the UK's most trusted appliance brands? Hotpoint is offering an exciting opportunity to train and qualify as a Trainee Field Service Engineer. No experience? No problem - we'll give you all the training you need to succeed!If you enjoy fixing things, love working with your hands, and want a job where every day is different, this could be the perfect fit for you. About the Role As a Trainee Field Service Engineer, you'll be out on the road, visiting customers' homes to diagnose and repair household appliances. You'll be the friendly face of Hotpoint, helping people get their appliances back up and running.What you'll be doing: • Driving your own Hotpoint van to customer appointments, • Diagnosing and repairing appliances like tumble dryers, electrical cookers, washing machines, • Providing top-notch customer service, • Managing your tools and spare parts stock We'll fully support you from day one with a blend of classroom learning, hands-on experience, and on-the-job training: • Welcome Induction (2 days) - Meet your team, collect your equipment, and learn key safety info, • Shadowing - Join an experienced engineer on the road to see the job in action, • Phase 1 Training (2 weeks) - Technical training at our specialist centre in Peterborough, • On-the-Job Learning (6 - 9 months) - Build your skills with real customers We're looking for people who are: • Passionate about customer service, • Interested in electrics, mechanics, or hands-on problem-solving, • Hold a full UK manual driving licence, • Physically fit - able to move and lift appliances, • Eligible to work in the UK, • Pay: £27,377 - £28,352 per year (daily rate equivalent via umbrella company), • Bonuses: Commission + overtime opportunities, • Vehicle: Fully equipped company van + fuel card, • Time Off: 20 days holiday + bank holidays increasing to 25 days once permanent, • Learn from the best with industry-leading training, • Join a globally respected brand trusted by millions, • Enjoy a secure career path with opportunities to grow This is more than just a job - it's the start of a long-term career where you'll learn new skills, meet great people, and be proud of what you do. Hit Apply and take the first step to becoming a fully qualified Field Service Engineer with Hotpoint. For further information please contact the academy team!

EC&I Engineer Bolton Competitive Salary Overview: We are seeking a skilled EC&I Engineer to join our clients team, specialising in the design, installation, and maintenance of advanced automatic door and access systems. The successful candidate will work on a wide range of systems, from pedestrian doors to oversized industrial and safety-critical doors used in nuclear, defence, transport, and high-hazard facilities. This role requires technical expertise in electrical, control, and safety systems, along with a strong understanding of regulatory compliance and performance standards. Key Responsibilities: • Lead multi-departmental integration to define project scope and support Functional Design Specifications., • Conduct site assessments to evaluate existing systems and verify modification requirements., • Design control systems, including wiring schematics, panel assemblies, and cable schedules., • Analyse and verify Performance Levels (PL) of safety-related parts of control systems using SISTEMA., • Produce EC&I drawings, documentation, and calculations in compliance with standards., • Provide technical support to site teams, including fault diagnosis and troubleshooting., • Review and verify EC&I drawings and documentation produced by other engineers., • Ensure adherence to electrical and safety regulations and company processes., • Contribute to Non-Conformance Report (NCR) resolution and raise NCRs when necessary., • Maintain strong collaboration with internal teams, subcontractors, and external stakeholders., • Participate in continuous improvement initiatives, knowledge transfer, and innovative design solutions., • Qualification in Electrical Engineering or related discipline (NVQ Level 3, HNC/HND, or equivalent)., • Proven experience with automated doors, access systems, or similar electro-mechanical systems., • Strong understanding of electrical systems, control circuits, and fault-finding., • Knowledge of UK Supply of Machinery (Safety) Regulations 2008 and Machinery Directive principles., • Familiarity with relevant standards (BS EN 16005, BS EN 12453, BS ISO 13849-1 & 2, BS EN 60204, BS EN 7671)., • Proficiency in reading and interpreting electrical drawings and schematics., • Experience with 2D and 3D CAD software (preferably AutoCAD 2D / Inventor 3D)., • Ability to independently design compliant EC&I systems and produce associated documentation., • Experience generating hand and software-based calculations., • Understanding of PLC software packages is advantageous., • Strong focus on quality, output, and team motivation., • Experience with industrial and powered door systems, including roller shutters, sectional doors, and sliding doors., • ECS/CSCS card and SC Clearance eligibility., • Experience with safety-critical systems in nuclear, defence, or heavy industry environments., • Advanced knowledge of standards such as BS EN 16005, BS EN 12453, BS EN ISO 13849, and BS EN 60204., • Experience using SISTEMA for PL calculations.

Multiskilled Maintenance Engineer (Electrical Bias) Location: Leigh, Greater ManchesterShifts: 2pm–10pm Salary: £44,895 (training rate) £48,986 after training £55,109 from May 2026Contract: Permanent, Full-time What’s in it for you • Competitive salary with structured pay increases, • 22 days holiday + 8 bank holidays, • Excellent pension scheme (5% employee / 3% employer), • Free on-site parking, • State-of-the-art, clean, modern manufacturing site, • Long-term career stability with a company that values its peopleAbout the Company Our client is a market-leading UK manufacturer, trusted for over 40 years and now entering an exciting new growth phase. With a brand-new, high-tech site on the horizon, they’re investing heavily in cutting-edge automated machinery and continuous improvement. You’ll be joining a company that genuinely values engineering excellence where quality, innovation, and team longevity are part of the culture. Their product quality and warranty standards are second to none, and engineers here take pride in being part of something built to last.The Role You’ll play a key part in maintaining and improving a high-volume automated manufacturing operation. This is a hands-on, proactive role where you’ll diagnose, repair, and improve electrical and mechanical systems across modern production lines. Day to day, you will:, • Carry out planned and reactive maintenance on automated machinery, • Identify and resolve breakdowns efficiently to minimise downtime, • Ensure compliance with all safety and inspection standards, • Work closely with Production and Quality teams to optimise processes, • Contribute to continuous improvement and reliability initiativesWhat We’re Looking For You’re a practical problem-solver who loves getting to the root cause, not just fixing symptoms. You take pride in precision, enjoy a challenge, and thrive in a fast-moving environment.Essential experience & qualifications, • Time-served apprenticeship + ONC (or higher) in Electrical/Electronic Engineering, • Proven post-apprenticeship experience in an industrial/manufacturing setting, • Strong electrical fault-finding and maintenance skills, • Knowledge of mechanical, hydraulic, and pneumatic systems, • Confident using CMMS and other computer-based systemsPersonal attributes, • Analytical, systematic thinker with strong attention to detail, • Calm and methodical under pressure, • Able to work both independently and collaboratively, • Flexible, reliable, and motivated to learnWhy You’ll Love Working Here, • You’ll work with the latest technology in an environment that’s modern, clean, and well-organised no “make do and mend” culture., • You’ll be well rewarded for your skills with clear, structured pay progression., • You’ll join a company that keeps its people known for long service and genuine investment in staff., • You’ll have a voice: engineers are encouraged to bring ideas and shape how things are done.Interested? If you’re ready to take the next step in your maintenance career, we’d love to hear from you. Send your CV (including salary expectations and notice period) to Or call Victoria O’Connor on to discuss the role in more detail.

Multi Skilled Maintenance Engineer Wigan Monday to Friday Up to £45,000 We are looking for a motivated Mechanical Maintenance Engineer to join a leading manufacturer. Reporting directly to the engineering manager you will be a key member in ensuring the production facility is kept running. You will be involved in all aspects of planned and reactive maintenance within their operation. With progressive training and development this company is always looking to enhance its employees and their skill sets, whilst additionally being supported by a welcoming team of engineers. The position will appeal to a strong engineer looking for their next challenging role within in a secure and stable company. Role Description: • Providing both Reactive & PPM maintenance, • Hydraulics, Pneumatics, • Sensors, Motors, Pumps, Belts, • Conveyors, Bearings, Belts, Chains, Pumps, • Adhering To All Health & Safety on Site Skills and Qualifications: • Maintenance Experience, • Electrical Qualifications Desirable, • Mechanical Experience Desirable In return for your commitment my client offers a stable and secure career for a technically motivated engineer. If you feel this is of interest, please send your CV directly to Morgan Blount at or call for a confidential discussion on .

Multi Skilled Maintenance Engineer Wigan Monday to Friday - Earlies, Lates & Nights Up to £50,000 We are looking for a motivated Electrical Maintenance Engineer to join a leading manufacturer. Reporting directly to the engineering manager you will be a key member in ensuring the production facility is kept running. You will be involved in all aspects of planned and reactive maintenance within their operation. With progressive training and development this company is always looking to enhance its employees and their skill sets, whilst additionally being supported by a welcoming team of engineers. The position will appeal to a strong engineer looking for their next challenging role within in a secure and stable company. Role Description: • Providing both Reactive & PPM maintenance, • Hydraulics, Pneumatics, • Sensors, Motors, Pumps, Belts, • Conveyors, Bearings, Belts, Chains, Pumps, • Adhering To All Health & Safety on Site Skills and Qualifications: • Maintenance Experience, • Electrical Qualifications Desirable, • Mechanical Experience Desirable In return for your commitment my client offers a stable and secure career for a technically motivated engineer. If you feel this is of interest, please send your CV directly to Morgan Blount at or call for a confidential discussion on .

Senior Gas Heating Engineers Greater Manchester | £38,500 - £41,600 + Van + Fuel + Benefits | Career Progression Due to expansion, multiple Senior Gas Engineer opportunities are now available: • Gas Engineer Service / Breakdown If you're currently working as a Gas Heating Engineer either service or install and feel like you're stuck with no real progression, this could be the career move you've been waiting for. About the Company A fast-growing heating & boiler repair business with a brilliant reputation across Greater Manchester. This isn't a churn-and-burn environment, they invest in training, reward high performance, and build real career pathways for their engineers. The Role - Senior Gas Heating Engineer You'll service, install, maintain, fault-find and repair domestic heating systems to a high standard across the region. Work includes: • First fix to final installation of appliances & associated pipework, • Heating and hot water fault finding (strong first-time fix rate), • Boiler servicing, installations & breakdowns, • Domestic Gas Safety inspections, • G3 Unvented (Desirable), • Working to S & Y plan principles, • Basic electrical diagnostics using a multimeter You'll be a confident, tidy and experienced domestic heating engineer who takes pride in workmanship and customer service. Essential: • 5-7+ years in domestic heating installations & repair, • Domestic ACS (CCN1, CKR1, HTR1, CENWAT), • Gas Safe, • Broad heating systems knowledge, • G3 Unvented Hot Water, • Commercial gas / renewables / oil experience, • Up to £38,500 - £41,600 DOE, • Company van + fuel + uniform, • 28 days holiday (inc bank holidays), • Mon-Fri core hours, • Optional overtime and Optional Saturdays Because you'll be stepping into an environment where: Quality matters Skills are respected Training is ongoing Progression is real You're not just a number

We are looking for a talented and driven Telemetry Field Engineer to join United Utilities in a fast paced, modern maintenance environment. Each working day will begin from your home base, travelling directly to sites across Lancashire and Greater Manchester. This home-based start offers autonomy and flexibility while placing you at the forefront of maintaining the telemetry and control systems that support essential water and wastewater services for millions of customers. You will take ownership of proactive, planned and reactive maintenance across our telemetry assets, including second and third line on site support. Acting as a trusted point of escalation for Monitoring and Control Regional Engineers, you will be part of a highly skilled mobile team focused on safety, performance, compliance and reducing environmental impact. This is a fantastic opportunity for an experienced field engineer who enjoys solving complex problems, working independently and seeing the real-world impact of their work every day. Technical Skills and Experience • Confident working both collaboratively and independently, resilient, self-motivated and a strong problem solver with proven technical capability, • Open and adaptable mindset, with the ability and willingness to develop into specialist maintenance areas as required, • Strong diagnostic capability supported by excellent organisational, planning, communication and computer skills, • Previous experience working within the Water Industry, • A clear commitment to maintaining technical skills, competence and up to date knowledge throughout your career Skills, Experience and Qualifications Essential Qualifications • Full UK driving licence, • Time served apprenticeship or NVQ Level 3 or equivalent, • HNC, HND or Degree qualification or equivalent hands-on technical experience, • Solid understanding of IP networking and routing principles, • Ability to think logically, make sound decisions and work independently, • Good working knowledge of point to point and multipoint radio systems, • Relevant Water Industry experience, • Strong awareness of physical and IT related security principles, • Working understanding of Microsoft and Linux operating systems, • Experience operating within a technical service desk environment, • In depth understanding of different RTU types, • Knowledge of telemetry, control and automation infrastructure, • Understanding of communications media, • Ability to accurately record actions and produce clear, high quality documentation, • Confidence working with IT hardware and Microsoft applications, • Practical experience with telemetry devices and wide area communications, • Good working knowledge of hardwired analogue and digital control systems Why Join United Utilities At United Utilities, your work goes beyond engineering. You will help protect the environment, support communities and keep vital infrastructure running every day. You will join a business that invests in modern technology, values its people and offers genuine opportunities to grow your skills within a supportive and safety focused culture. Benefits • 26 days annual leave rising to 30 after four years plus 8 bank holidays, • Competitive pension with up to 14 percent employer contribution and life cover, • Up to 7.5 percent performance related bonus plus recognition awards, • Company funded healthcare plan, • MyGymDiscounts offering savings on gyms and digital fitness, • Access to Best Doctors, Salary Finance and Wealth at Work, • Retail deals and discounts, • EVolve car scheme, • Employee Assistance Programme and mental health first aiders, • ShareBuy scheme, • MORE Choices flexible benefits

Howorth have been clean air pioneers since 1858. Utilising our expertise in air engineering to deliver controlled clean environments for healthcare and pharmaceutical and its our people that make us unique. Due to our continued growth, we have a vacancy for an EC&I Design Engineer within our Pharma Team. The Role: To take the lead in the design and development of the Pharma and Bio product range, in particular the development of processes and the electrical controls and instrument requirements; providing technical support to other areas of the business as required. Responsibilities include but aren't limited to: • Challenge established ways of doing things by proactively developing innovations for products across the range; looking to develop USPs., • Deliver a design to cost and time constraints, • Standardisation of design – developing a modular framework for the entire product range, • Play a key role in value engineering of EC&I to increase margins, • Contribute to tender/estimate preparation by passing on design and technical knowledge to the sales team, • Set Technicians and Field Engineers up for success by passing on relevant technical expertise, • Review and streamline processes aiming to increase efficiency and reduce cost without loss of quality and functionality, • Able to write FDS, P&ID’s, and input into FAT & SAT protocols Qualifications & Preferred Experience: • Have a minimum educational OND in Electrical Engineering, • Have a proven track record in EC&I product and process design, • Knowledge of Pharmaceutical processes and containment requirements is advantageous, • To be fully conversant with the latest engineering design concepts, engineering standards and disciplines, including hazardous area compliance (ATEX and UL Directives), • Understand Health and Safety legislation related to design, incorporating risk assessments., • Fully experienced/trained in AutoCAD for the production of electrical schematics and process drawings or similar packages.

Application Engineer - Protection, Control, Automation England, Wales, Scotland, United Kingdom Hybrid/Remote About the Role: Join a long-established organisation within the electrical engineering sector, dedicated to strengthening and modernising power networks worldwide. With over a century of expertise, the company plays a key role in improving grid reliability and resilience. Despite its global reach and strong industry reputation, the organisation maintains an environment where individual contributions truly matter. Location: This position is a remote based contract, with flexible hybrid working options across different UK offices (England, Wales & Stoutland). Fully remote arrangements is available, provided you are within reasonable reach of a major transport hub. The Position: This opportunity is suited to an experienced engineer with strong expertise in electrical distribution systems (or transmsision), including switching, protection, automation, and control technologies. The role involves both technical and strategic input, particularly in aligning product capabilities with customer needs. You will support a range of solutions and services for utility clients across the EMEA region. Strong communication skills are essential, as you will engage with stakeholders at all levels - from technical teams to senior decision-makers. The role also involves hands-on support in the field, including occasional emergency response, and requires regular travel, including overnight stays and some international trips. Key Responsibilities • Provide technical support to sales teams across the EMEA region, • Deliver expert product support and guidance to customers, • Assist in customer and internal training on equipment and systems, • Ensure compliance with industry safety standards and electrical regulations, • Contribute to product development and adaptation for regional markets, • Support analysis and application of protection systems for distribution networks, • Assist with general sales and customer support activities, • Undertake additional duties as required Requirements • Degree in Engineering or equivalent practical experience, • Chartered Engineer (CEng) status is advantageous, • Experience working with Distribution Network Operators (DNOs), • Willingness to travel across the UK, Ireland, and occasionally internationally, • Proficiency in tools such as Microsoft Word, Excel, and enterprise systems (e.g. CRM/ERP platforms), • Strong written and verbal communication skills, • Knowledge of medium and high voltage electrical equipment and applications, • Excellent organisational and time management abilities, • Full UK driving licence

As a Lead Engineer (electrical bias) for a famous food manufacturer, you will be responsible for leading three shift engineers, leading projects and providing hands on PPM and OEE support to the procative maintenance team. This challenging role requires a time served/apprentice trained engineer with previous experience in a fast-paced environment. Bottling and Filling experience will make you stand out in this factory who manufacture famous brand sauces. Your responsibilities as Lead (Electrical Bias) Engineer will include: Manage the engineering shift of 3 direct reports, to provide maximum availability of all production plant and support equipment. Implement initiatives that drive out costs, improve OEE and waste reduction. Ensure that the engineering team operates to maximise machine uptime, planned maintenance, health and safety, quality culture, hygiene, and budgetary requirements. Carry out PPM and reactive breakdown maintenance across the factory. Your Profile: Recognised Engineering Apprenticeship (Electrical Bias or Multi skilled) NVQ or C&G Level 3 Proven leadership and team management expertise Experience in managing contractors and issuing permit-to-work procedures Proficiency in using maintenance management software (CMMS) Ability to work under pressure and meet deadlines. Excellent problem-solving and analytical skills. What's on offer: Attractive salary, £60,000 Yearly rises up to 10% Bonus Continental Shift Pattern, 2 days, 2 nights, 4 off. Pension matched up to 10%, Subsidised canteen & staff discounts Cycle to work scheme What Next? Apply below to share your CV or call our offices to discuss the first step in making that dream move. Tiro is a specialist Employment Agency & Employment Business assisting with both contract and permanent opportunities in high performance cars, motorsport, software, electronics, engineering & manufacturing. Please note your call may be recorded for training or monitoring processes.

We are looking for a Production Engineer to join a well established UK manufacturer based in Bolton that is part of a global organisation. The successful candidate will play a key role in supporting production and engineering teams.\nAs a Production Engineer, you will ensure products are manufactured to specification, support new product introduction, maintain tooling and fixtures, and drive continuous improvement initiatives. This role offers a hands on opportunity to work closely with multiple departments and contribute to the efficiency and quality of manufacturing processes.\nSalary: £36,000 – £42,000 per annum (dependent on experience). Hours: Monday–Thursday 07:30–16:00, Friday 07:30–12:50 (38 hours per week).\nAs a Production Engineer, your main duties will include:\n * Managing the lifecycle of production tooling and fixtures, including maintenance, calibration, and ongoing optimisation.\n * Creating, editing, and validating CNC programs using Fanuc, Heidenhain, or Siemens systems.\n * Optimising CNC milling and turning operations, from method selection to cycle time reduction and quality assurance.\n * Leading continuous improvement initiatives with measurable targets, including cycle time, scrap, changeover, and right-first-time performance.\n * Designing and implementing jigs and fixtures to improve repeatability, ergonomics, and shop floor safety.\n * Providing hands-on support for setup issues, technical bottlenecks, and process deviations.\n * Training operators and setters on new tooling, CNC programs, and best practices.\n * Maintaining accurate technical documentation including tool sheets, routings, BOMs, and manufacturing drawings.\n * Collaborating with Planning, Design, Quality, and Maintenance teams to ensure smooth production flow.\n * Supporting industrialisation and introduction of new products into manufacturing.\nRequirements:\n * HND, HNC, Degree, or equivalent in Mechanical, Manufacturing, or related engineering discipline.\n * Experience in production or manufacturing environments.\n * Proficiency in using lathes and milling machines.\n * The ideal Production Engineer will be proactive, technically confident, and focused on improving manufacturing processes.\n * Experience with CNC programming on Fanuc, Heidenhain, or Siemens systems.\n * Skilled in using standard power tools (drill, grinder, jigsaw).\n * Ability to read and interpret technical drawings.\n * Strong problem-solving skills with a practical, hands-on approach.\n * High attention to detail and good organisational ability.\n * Effective communication and teamwork skills.\n * Familiarity with continuous improvement techniques.\n * Experience using CAD software (e.g., SolidWorks, AutoCAD Inventor) is desirable but not required.\nProduction Engineer Benefits:\n * 25 days holiday plus bank holidays.\n * Company pension scheme.\n * Cash Health Plan and Employee Assistance Programme, Cycle to work scheme, Life assurance.\n * Full training and ongoing support.\n * Opportunities for career progression.\n * Friendly and inclusive working environment.\n * Free onsite parking.\nThis Production Engeering role is being advertised by S&D Trade Recruitment who are operating as an employment business and are acting as an employment agency on behalf of our client. Please apply with currrent CV and ask for Shelley in the office

Job Description: Gas Engineer – Service & Repair Engineer | Wigan What We Offer • £35,555.52 base salary - expected earnings up to £45K, • Full-Time, Permanent Contract, • Annual Pay Review & Profit Share Scheme, • Fully Costed Van & Fuel Card (EV options with free home install), • Renewables Upskill Potential, • Local ByBox Allocation – less travel, more earning potential Exceptional Benefits • Employee Energy Allowance & Discount on HIVE Products, • Company-Funded Healthcare + 24/7 Online GP Service, • Company-matched Pension scheme, • 25 Days Holiday + Bank Holidays, • Full Sick Pay after successful probation, • Life Assurance, Income Protection & Accident Insurance, • Exclusive Retail Discounts & Financial Education Support Your role You will be carrying out repairs and maintenance in domestic Social Housing properties, aiming for first-time fixes with the support of our 24/7 network What we need from you • Hold a valid UK driving license with no more than 6 points, • Hold the Right to Work in the UK, • Hold 2 year’s minimum qualified experience, • Be ACS qualified, including CCN1, CENWAT, HTR1, & CKR1, • Exhibit knowledge of all procedures and safety measures to PH Jones and British Gas standards whilst offering excellent customer service PH Jones was formed in 1963 and has continued to grow through the provision of excellent customer service, high quality delivery and an unrivalled focus on customer care. PH Jones was acquired by British Gas in 2011 and is a key member of the Centrica Plc, a FTSE 100 company. At Centrica we embrace diversity and actively seek to attract individuals with unique backgrounds and perspectives. To build a more sustainable future, we need the best team – a team with a diverse mix of people and skills, where everyone feels welcome and able to succeed

Start Your Career as a Trainee Field Service Engineer with Hotpoint\n\nAre you ready to launch a hands-on career with one of the UK's most trusted appliance brands? Hotpoint is offering an exciting opportunity to train and qualify as a Trainee Field Service Engineer. No experience? No problem - we'll give you all the training you need to succeed!\nIf you enjoy fixing things, love working with your hands, and want a job where every day is different, this could be the perfect fit for you.\n\nAbout the Role\n\nAs a Trainee Field Service Engineer, you'll be out on the road, visiting customers' homes to diagnose and repair household appliances. You'll be the friendly face of Hotpoint, helping people get their appliances back up and running.\nWhat you'll be doing:\n\nDriving your own Hotpoint van to customer appointments\nDiagnosing and repairing appliances like tumble dryers, electrical cookers, washing machines\nProviding top-notch customer service\nManaging your tools and spare parts stock\nPromoting our trusted Hotpoint productsYour Training Journey\n\nWe'll fully support you from day one with a blend of classroom learning, hands-on experience, and on-the-job training:\n\nWelcome Induction (2 days) - Meet your team, collect your equipment, and learn key safety info\nShadowing - Join an experienced engineer on the road to see the job in action\nPhase 1 Training (2 weeks) - Technical training at our specialist centre in Peterborough\nOn-the-Job Learning (6 - 9 months) - Build your skills with real customers\nPhase 2 Training (1 week) - Level up your knowledge learning another applianceWhat You'll Need\n\nWe're looking for people who are:\n\nPassionate about customer service\nInterested in electrics, mechanics, or hands-on problem-solving\nHold a full UK manual driving licence\nPhysically fit - able to move and lift appliances\nEligible to work in the UK\nNo previous field engineering experience is required - just a great attitude and a willingness to learn!What's In It for You?\n\nPay: £27,377 - £28,352 per year (daily rate equivalent via umbrella company)\nBonuses: Commission + overtime opportunities\nVehicle: Fully equipped company van + fuel card\nTime Off: 20 days holiday + bank holidays increasing to 25 days once permanent\nProgression: The chance to move into a permanent role within 12 months with even more rewardsWhy Choose Hotpoint?\n\nLearn from the best with industry-leading training\nJoin a globally respected brand trusted by millions\nEnjoy a secure career path with opportunities to grow\nBe part of a team that values skill, effort, and dedicationReady to Apply?\n\nThis is more than just a job - it's the start of a long-term career where you'll learn new skills, meet great people, and be proud of what you do.\n\nHit Apply and take the first step to becoming a fully qualified Field Service Engineer with Hotpoint. For further information please contact the academy team

I am lookiong for an expereinced EC&I Engineer, this is a full-time role (37 hours per week, Monday to Friday) with a salary up to around £59,000 depending on experience. The working pattern is usually Monday–Thursday in the office (8:00–17:00) and a half-day working from home on Fridays.\n\nThe position involves working on automated systems across a range of industrial and safety-critical environments. You’d be leading on electrical control system design, while also supporting installation, commissioning, and ongoing performance.\n\nYou’d be working closely with project teams, mechanical engineers, and clients, getting involved across the full project lifecycle - from design through to delivery and support.\n\nKey parts of the role include:\n\n * Designing electrical control systems and producing technical documentation\n\n * Carrying out site surveys and supporting system improvements\n\n * Troubleshooting and fault-finding\n\n * Ensuring compliance with relevant safety standards\n\n * Collaborating with internal teams and external stakeholders\n\nThey’re looking for someone with a background in electrical engineering (NVQ Level 3, HNC/HND or similar), experience with automated or electro-mechanical systems, and strong knowledge of control systems and fault finding.\n\nExperience with things like PLCs, safety systems, or working in regulated environments would be a bonus

Multi-Skilled Electrical Bias Engineer\n\nLocation: Bolton\nEmployment Type: Full-Time\n\nAbout Us\n\nCBRE is the global leader in real estate services, operating in 48 countries with over 70,000 employees. We deliver integrated facilities and corporate real estate management solutions to some of the world's most respected companies. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm.\n\nThe Opportunity\n\nWe are seeking a skilled Electrical Bias Engineer to join our dynamic team. This role is ideal for someone with a strong electrical background and experience in critical environments such as data centres or trading floors. You'll be responsible for maintaining and upgrading electrical systems, ensuring optimal performance and safety across our client sites.\n\nKey Responsibilities\n\nRespond to breakdown maintenance requests within SLA timelines.\nMaintain and repair modular UPS systems and diagnose power quality issues.\nConduct risk-focused maintenance and monitor critical systems.\nProvide emergency response and escalate urgent issues.\nComplete reactive Helpdesk requests and ensure documentation is up to date.\nUndertake site surveys, produce method statements and risk assessments.\nInstall and upgrade plant equipment and interpret technical drawings.\nMonitor environmental conditions and equipment loading.\nEnsure compliance with financial and health & safety processes.\nPrepare incident reports and root cause analyses for system outages.\n\nWhat We're Looking For\n\nEssential:\n\n18th Edition Electrical Wiring Regulations certification.\n\nDesirable:\n\nExperience with BMS, HVAC systems, chilled water circuits, and chilled beams.\nUnderstanding of CDM processes and H&S procedures (COSHH, Risk Assessments, etc.).\nHealth & Safety qualifications (IOSH/NEBOSH).\nTesting and inspection of electrical systems.\nFamiliarity with emergency response protocols.\nAuthorised Person certification (e.g., AP15/12).\nWater hygiene knowledge (L8).\nStrong communication and customer service skills.\n\nWhy Join Us?\n\nWork with a global leader in real estate services.\nBe part of a supportive and professional team.\nOpportunities for career development and training.\nCompetitive salary and benefits package

Assystem is an international company with one mission: accelerate the energy transition around the world.\n \n Every day, our 6,750 switchers located in 12 countries (Europe, Middle East, Pacific Asia & Africa) connect their six thousand billion neurons to tackle the task of the century: switching to low-carbon energy.\n \n We are a collective committed to the actors who are making the energy switch. Sharing our knowledge, expertise and values allows us to innovate and think differently about the energy transition.\n \n Drawing on more than 55 years' experience in highly regulated sectors subject to strict security and safety requirements, we provide our customers with engineering and project management services, as well as digital services and solutions to optimize the performance of complex infrastructure projects throughout their life cycle. The Group is currently ranked second in the world for nuclear engineering.\n \n To ensure a viable, efficient, and reliable energy future for all. Job description Role Purpose\n\n Provide engineering expertise in the design, development and verification of control systems used in nuclear facilities. The role covers programmable logic controllers (PLCs), distributed control systems (DCS), safety-related I&C functions and supporting systems such as SCADA/HMI. The engineer ensures that control system implementations are safe, compliant and fully traceable to nuclear requirements throughout the project lifecycle.\n\n Key Responsibilities\n\nDevelop control system architectures and functional designs that support plant operation, automatic sequences, interlocks and protection functions.\nProduce technical documents including control philosophies, functional requirements, logic descriptions, cause and effect diagrams and interface specifications.\nConfigure and programme PLC, DCS or specialised control platforms in compliance with nuclear lifecycle expectations and relevant standards.\nCollaborate with EC&I, process, mechanical, safety and human factors engineers to ensure consistent system behaviour across interfaces.\nIntegrate control logic with SCADA/HMI systems, historians, networks and field instrumentation.\nApply good practice in alarm handling and annunciation, aligning with EEMUA 191 and site alarm strategies.\nPerform verification and validation tasks including peer review, simulation, software testing, FAT, SAT and commissioning support.\nDevelop test specifications and ensure that test coverage aligns with requirements, functional hazards and safety classifications.\nMaintain configuration control, software versions, coding standards and technical baselines within nuclear quality frameworks.Essential Skills and Experience\n\nControl systems engineering experience in a regulated industry, ideally nuclear, defence, energy or similar.\nExperience producing control philosophies, logic diagrams, sequence descriptions and similar deliverables.\nAbility to interpret P&IDs, process narratives, safety functional requirements and mechanical schematics.\nStrong understanding of PLC/DCS programming methods, including structured text, ladder logic, function block and sequential function charts.\nExperience with verification, testing, simulation or model-based approaches for control logic validation.\nKnowledge of nuclear I&C lifecycle requirements, safety classification and applicable standards such as IEC 61513, IEC 60880, IEC 61508 and IEC 61226.\nFamiliarity with alarm management principles and experience applying EEMUA 191.Qualifications \nKnowledge of nuclear new build control architectures, reactor island control systems or balance of plant systems.\nExperience with digital twin concepts, advanced simulation or MBSE approaches.\nExperience with cyber security requirements for nuclear I&C systems.\nChartered Engineer status or working towards it.Additional information \n\nBPSS and SC required\nAbility to travel Assystem offices and customer sites within UK.\nTo undertake work packages supporting major UK and international Nuclear Clients.Due to the nature of work to be undertaken applicants will be required to meet certain residency criteria in order to attain a minimum level of UK security clearance if not already security cleared to a minimum SC level.\n\n We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future

At Warburtons, family is at the heart of our business. Five generations' worth of expertise that goes into making our bakery products allows us to continue a tradition of baking inherited over the past 150 years.\n\nWarburtons is the largest bakery brand in the UK, but that doesn't allow us to rest on our laurels. We are pioneers of the industry and ambitious market leaders, always seeking to challenge ourselves and convention. It is part of our philosophy to provide honest good sense on issues of health and well-being, helping the whole family to enjoy our products as part of a healthy, balanced diet, through a range of products to suit all meal occasions, lifestyles and tastes.\n\nRole: Multi-Skilled Engineer\nLocation: Bolton Bakery\nHours: 4 on 4 off Shift Pattern\nSalary: Circa £55,000 + Overtime + Annual Profit-Related Bonus\n\nWhy Join Us?\nAt Warburtons, engineering isn’t just about keeping the lines running – it’s about driving the future of baking. With a strong Northern heritage and a forward-thinking mindset, we blend traditional values with cutting-edge technology to stay ahead of the game. That’s why we’re embracing next-generation automation and technological engineering gains, with a bold vision to become world-class.\n\nOur newly launched Engineering Academy, built in partnership with the IMechE, is one of our proudest achievements. It’s designed to develop and elevate our engineers, equipping you with the skills, training, and recognition to thrive, whether you want to deepen your technical expertise or progress your career.\n\n What You’ll Be Getting Stuck Into You’ll join a highly skilled, collaborative team of Engineers focused on:\n\n Planned Preventative Maintenance (PPM)\nRoot Cause Analysis (RCA)\nCondition-Based Monitoring (CBM)\nContinuous Improvement and Energy Efficiency Projects\n\n From diagnosing faults before they cause downtime to delivering long-term fixes and system upgrades, this is a hands-on, proactive role that plays a critical part in the success of our 24/7, high-speed, automated food manufacturing site.\n\n What We’re Looking For We want talented engineers who are hungry to learn, grow and make an impact. Here’s what helps you rise to the top of the list:\n\n Technically strong Multi Skilled Engineers, predominately electrically biased with mechanical skills (ideally in FMCG or high-volume manufacturing)\nAn apprenticeship, BTEC, HNC or similar engineering qualification\nExperience with condition-based monitoring (thermal imaging, ultrasound, vibration analysis) is a bonus\nTop-tier problem-solving and root cause analysis skills\nA safety-first mindset, with good knowledge of H&S systems and legislation\nA desire to develop, contribute, and take ownership in a team striving for operational excellence\n\n Extra Dough A slice of the annual profits with our discretionary bonus scheme\nAward-winning pension with generous company contributions\nHoliday trading scheme – buy up to an extra week off per year\nLife assurance, plus health & wellbeing support including physiotherapy and a 24/7 helpline\nContinued personal and professional development through the Warburtons Engineering Academy\nFully stocked kitchens (yes – crumpets, teacakes, and more)\nDiscounts for you and your family through our Extra Dough platform\n\n Sounds like the right mix? Then it’s time to bring your skills to the table.\nApply today and help shape the future of engineering at Warburtons – where tradition meets innovation, and every day is a fresh opportunity to rise.\n\n We respect and value difference. We look to create an inclusive workplace that promotes and values diversity. Companies that are diverse in age, gender identity, race, religion, sexual orientation, physical or mental ability, ethnicity, or any other aspect which makes them unique, are proven to be better companies. More importantly, creating an environment where everyone, from any background, can do their best work, is the right thing to do

Site Agent – Civil Engineering\nAn established civil engineering contractor is looking to appoint an experienced Site Agent to oversee the delivery of projects across the North West.\nThis role offers the opportunity to take full ownership of site operations on a range of civil engineering schemes, with a strong pipeline of work and long-term career prospects. While projects are primarily regional, flexibility to travel or work away when required is essential.\nKey Responsibilities\n * Take full responsibility for day-to-day site operations on civil engineering projects\n * Plan, programme, and coordinate works in line with project requirements\n * Ensure works are delivered in accordance with drawings, specifications, and contract requirements\n * Oversee setting out activities, ensuring accuracy and quality standards are maintained\n * Manage and supervise site teams, including engineers and subcontractors\n * Monitor progress against programme and implement corrective actions where required\n * Maintain detailed site records, diaries, and quality documentation\n * Support commercial teams with measurements, valuations, and reporting\n * Ensure production of as-built drawings in line with client requirements\n * Chair or attend site meetings and liaise with clients, consultants, and stakeholders\n * Ensure full compliance with health, safety, and environmental policies\n * Promote a professional image and maintain strong client relationships\nRequirements\n * Valid CSCS Card\n * Proven experience working as a Site Agent / Senior Engineer within civil engineering\n * Strong background in earthworks, drainage, and reinforced concrete projects\n * Good understanding of setting out and surveying processes (GPS, total station, etc.)\n * Experience managing site teams and subcontractors\n * Strong organisational, leadership, and problem-solving skills\n * Confident communicator, both written and verbal\n * IT literate, with experience of site documentation and reporting systems\n * Flexible approach to travel and working away\n * Ideally HNC/HND/Degree qualified (or working towards) in Civil Engineering\nWhat’s on Offer\n * Competitive salary package\n * Company vehicle or car allowance\n * Pension scheme\n * Generous holiday allowance\n * Private healthcare\n * Long-term progression within a stable and growing contractor

Role: Senior EC&I Engineer\n\nLocation: Bolton\n\nSalary: £45-£59k (Depending on Experience)\n\nWe are seeking a skilled EC&I (Electrical, Controls, and Instrumentation) Engineer to join our clients team, specialising in the design, installation, and maintenance of advanced automatic door and access systems.\n\nThe successful candidate will work on a wide range of systems, from pedestrian doors to oversized industrial and safety-critical doors used in nuclear, defence, transport, and high-hazard facilities. This role requires technical expertise in electrical, control, and safety systems, along with a strong understanding of regulatory compliance and performance standards.\n\nKey Responsibilities:\n\n * Lead multi-departmental integration to define project scope and support Functional Design Specifications.\n\n * Conduct site assessments to evaluate existing systems and verify modification requirements.\n\n * Design control systems, including wiring schematics, panel assemblies, and cable schedules.\n\n * Analyse and verify Performance Levels (PL) of safety-related parts of control systems using SISTEMA.\n\n * Produce EC&I drawings, documentation, and calculations in compliance with standards.\n\n * Provide technical support to site teams, including fault diagnosis and troubleshooting.\n\n * Review and verify EC&I drawings and documentation produced by other engineers.\n\n * Ensure adherence to electrical and safety regulations and company processes.\n\n * Contribute to Non-Conformance Report (NCR) resolution and raise NCRs when necessary.\n\n * Maintain strong collaboration with internal teams, subcontractors, and external stakeholders.\n\n * Participate in continuous improvement initiatives, knowledge transfer, and innovative design solutions.\n\n * Flexibility to work overtime to meet project deadlines as required.\n\nQualifications, Knowledge & Experience:\n\n * Qualification in Electrical Engineering or related discipline (NVQ Level 3, HNC/HND, or equivalent).\n\n * Proven experience with automated doors, access systems, or similar electro-mechanical systems.\n\n * Strong understanding of electrical systems, control circuits, and fault-finding.\n\n * Knowledge of UK Supply of Machinery (Safety) Regulations 2008 and Machinery Directive principles.\n\n * Familiarity with relevant standards (BS EN 16005, BS EN 12453, BS ISO (phone number removed) & 2, BS EN 60204, BS EN 7671).\n\n * Proficiency in reading and interpreting electrical drawings and schematics.\n\n * Experience with 2D and 3D CAD software (preferably AutoCAD 2D / Inventor 3D).\n\n * Ability to independently design compliant EC&I systems and produce associated documentation.\n\n * Experience generating hand and software-based calculations.\n\n * Understanding of PLC software packages is advantageous.\n\n * Strong focus on quality, output, and team motivation.\n\n * Experience with industrial and powered door systems, including roller shutters, sectional doors, and sliding doors.\n\n * ECS/CSCS card and SC Clearance eligibility.\n\n * Experience with safety-critical systems in nuclear, defence, or heavy industry environments.\n\n * Advanced knowledge of standards such as BS EN 16005, BS EN 12453, BS EN ISO 13849, and BS EN 60204.\n\n * Experience using SISTEMA for PL calculations.\n\n * Understanding of VFDs, safety PLCs, interlock systems, and emergency release mechanisms.\n\n**You must have the full right to work in the UK without the need for sponsorship both now, and in the future

Company Description\n\nAssystem is a global leader committed to accelerating the energy transition. With 7,500 employees across 12 countries, we tackle the monumental task of switching to low-carbon energy. Our 55+ years of experience in highly regulated sectors ensure we deliver top-notch engineering, project management, and digital solutions.\n\nJob Description\n\n🚀 Join the Fusion and Modular Nuclear Business Unit! 🚀Reporting to the Turbine Island Senior Mechanical Engineer, you will be responsible for various Turbine Island design development activities. The Mechanical Engineer shall work closely with multi-disciplined teams and the supply chain to help deliver the Turbine Island design.\n\nYour mission:\n\nEnsure supplier deliverables meet requirements.\nDevelop and check design documents with Senior Engineers.\nAssist in design development activities and optioneering studies.\nApply Systems Engineering principles.\nIntegrate Turbine Island design into wider power plant infrastructure.\nEngage with stakeholders and attend design reviews.\nEnsure compliance with safety regulations and quality management.Why Join the Community of Switchers?\n\n🌟 Over 55 years in nuclear engineering.\n🏆 Ranked among the top 3 largest nuclear engineering companies.\n💼 Attractive social benefits, including an engaging Employee Committee and holiday bonuses.\n📚 Ongoing training with numerous career opportunities.\n📈 70% of our managers are promoted internally!\n🏠 Hybrid work: 1-2 days remote per week. \n\nQualifications\n\nMinimum 2:1 BEng in Mechanical Engineering or equivalent.\nRelevant senior engineering experience in sectors like offshore, renewables, nuclear, or other highly regulated industries.\nSolid background in mechanical and structural engineering.\nProficient with CAD software: Skilled in Autodesk Inventor, AutoCAD, and/or Catia.\nStrong mathematical skills: Experienced with MathCAD software.\nSkilled in producing technical reports: Expertise in creating design and substantiation reports, assembly procedures, etc.\nKnowledge of manufacturing processes: Understanding of welding, machining, etc.\nExperienced with the engineering design cycle from Concept to Manufacture.Additional Information:\n\nFamiliar with European and Offshore standards: Experience with Eurocode 3 and DNV.\nMaster’s degree is a plus.\nSkilled in checking and approving engineering CAD assemblies and drawings.\nProficient in verifying engineering documentation: Manual calculations, reports, etc.\nExcellent Finite Element Analysis skills: In-depth knowledge of ANSYS Workbench is desirable.\nExperienced in non-linear and fatigue FEA: Familiar with DNV and Eurocodes.\n\nAdditional Information\n\nDue to the nature of the work, applicants must meet UK security clearance criteria.\n\nReady to make a difference in the nuclear engineering world? Join us and be a part of the future of nuclear and fusion innovation! 🌐✨\n\nWe are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future

Fire Engineer (JPC-109) Location - Remote Salary - £65,000 - £80,000 Overview: Complete internal and external Fire Risk Assessments both visual and fully intrusive. Advise clients on fire safety compliance within existing and new build schemes and work with multi disciplinary team in developing complex designs. Experience: • Minimum 3 years PQE, • External Wall Risk Assessments, • Retrospective and design fire strategies, • Compartmentation Surveys, • Large and small refurbishment and re-cladding projects, • Fire Protection Work, • Member of IFE, • Level 5 certificate/diploma or above Skills, Knowledge and Understanding: • Liaise closely with Clients, Contractors, Developers, Clerk of Works and other key stakeholders., • Undertake Risk Assessments in line with current legislation., • Advise clients of pragmatic, cost-effective solutions to mitigate risk where possible., • Ability to work in a fast-paced environment; decision making based on a clear fire engineering analysis. Clients: • Contractors and Developers., • Principally Local Authorities, Housing Associations and other Clients. General: • Comply with, or improve upon, our Clients’ Key Performance Indicators., • Working with a Quality Management System. Report on a regular basis on status of projects and update Fee Projections., • Assist the Director in Charge with Business Development, cultivating new and existing Clients to promote our Building Surveying service offering. Fire Engineering: • Assist the client in RAG assessing their stock to understand their potential liabilities., • Review information relating to fire safety that the client has accrued for their buildings to date and advise them of its suitability., • Conduct Fire Risk Assessments both internally and externally in-line with current industry guidance and compile a detailed report., • Provide CPD to clients, making them aware of their obligations as building owners., • Peer review reports from other Fire Engineers where requested., • Work with the project team to produce cost-effective, pragmatic remedial solutions where possible., • Attend client/resident meetings when required to explain reports that have been issued and the implications of the findings., • Produce Fire strategies, fire safety management plans, planning statement, fire statements, assist with BSR applications, review design drawings and technical data sheets., • Work with the project team to compile the ER’s., • Liaise closely with the Clerk of Works and the contractor and carry out compliance checks of the works as they progress., • Attend site progress meetings when required., • Assist with updating and creating new templates; support wider fire engineering team as required. Rewards and Benefits: • Competitive salary, • Discretionary bonus incentive, • Pension contributions, • Private medical insurance, • 28 days holiday (incl. Bank Holidays), • 3-4 days during Xmas period, • 1 day off for birthday Salary: £65,000 to £80,000 per annum

Software Controls Engineer 3-6 month contract £45.00 – £55.00 p/h DOE (Outside IR35) Liverpool Wigan St Helens Warrington Bolton Automation / PLC / Siemens TIA Portal / Rockwell / Allen-Bradley I am currently recruiting on behalf of a well-established UK manufacturer operating within a fast-paced production environment. They are seeking an experienced Software Controls Engineer to support an ongoing automation upgrade programme on a short-term contract basis. For this position, you will be required to carry out the following duties: Develop and modify PLC software using Siemens TIA Portal and/or Rockwell Studio 5000 across live production systems Support the commissioning and integration of new automated equipment into existing production lines Assist with FAT and SAT testing, including execution, sign-off and documentation Support integration between PLCs, HMIs, sensors and third-party systems Create and maintain commissioning documentation including I/O lists, FDS, SDS and test records Collaborate closely with Project Engineers, Electrical Engineers and site Operations teams to minimise downtime and deliver on programme The successful contractor will have the following attributes: Strong hands-on experience with PLC programming and fault-finding in live industrial environments Proven background in Siemens TIA Portal and/or Rockwell Studio 5000 Experience with SCADA or HMI platforms during commissioning and testing Exposure to servo drives, variable speed drives and motion control systems Familiarity with safety systems including Pilz or Sick safety PLCs Knowledge of PackML or industry-standard machine state models advantageous Food, beverage or FMCG sector experience beneficial but not essential The Benefits of This Position: Opportunity to work on a varied and technically interesting automation programme Exposure to modern controls architecture within an established manufacturing environment Outside IR35 contract ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation TPBN1_UKTJ

Electrical Design Lead Scroll down the page to see all associated job requirements, and any responsibilities successful candidates can expect. Location: Manchester Salary: highly competitive inclusive of a Car Cash Allowance (based on experience) Clarke is seeking a highly skilled, organised and proactiveElectrical Design Leadto support the delivery of mobile telecommunications infrastructure across the UK. This is a key technical role for someone with strong electrical engineering expertise, excellent communication skills and the ability to deliver high-quality, compliant and build-ready designs while working collaboratively with internal teams and external partners. The Role As an Electrical Design Lead, you will play a crucial role in the design and delivery of new and upgraded mobile telecoms sites, including macro towers, rooftops, small cells and in-building systems. Working closely with Radio, Transmission, Civils, Power and Build teams, you will produce technically accurate designs that comply with regulatory and industry standards and support efficient project delivery. You will act as an electrical subject-matter expert, contribute to feasibility assessments, guide technical decision-making and liaise with operators, local authorities and external stakeholders. The role also includes supporting process improvements, safety governance and the development of innovative design approaches across the business. Key Responsibilities • Produce and approve electrical designs for telecoms sites, ensuring compliance with relevant legislation, standards and safety protocols., • Act as the qualified Electrical QS for projects, ensuring robust certification and governance., • Conduct site feasibility assessments, including power availability, structural constraints, access considerations and budget implications., • Collaborate with internal engineering functions to ensure integrated, buildable and efficient design solutions., • Liaise with clients, mobile network operators, DNOs/IDNOs and local authorities to support project delivery., • Provide technical input into tenders, subcontractor engagements and project bids., • Ensure design accuracy, documentation quality and adherence to Clarke Telecoms MASTS, HSEQ and governance standards., • Support continuous improvement initiatives to enhance design processes and project outcomes., • Represent Clarke Telecom in technical meetings, providing clear, professional updates., • Support and mentor colleagues, contributing to team capability and knowledge sharing. Essential: • Strong background in electrical engineering within utilities, telecoms or related infrastructure sectors., • Experience delivering electrical or telecoms design work, ideally within the NERS/ICP environment., • Excellent communication and stakeholder-management skills., • Strong organisational ability and high attention to detail., • Proficiency with electrical design software (e.g., WinDebut, PSSE, DigSilent)., • Degree in Electrical Engineering., • Membership of the IET; Incorporated/Chartered Engineer status., • Self-motivated with the ability to work independently and take initiative., • Strong written and verbal communication skills., • Proactive, detail-focused and solutions-driven., • Flexible and comfortable managing changing priorities., • Able to build strong and positive working relationships across teams., • Professional, collaborative and committed to delivering high-quality results. About Us Clarke Telecom is a leading provider of end-to-end wireless telecoms network infrastructure services. We manage every aspect of a project, ensuring that each site is optimised to its full potential. As technology evolves, so do our services, allowing us to stay at the forefront of the industry and remain the UKs premier wireless telecommunications infrastructure provider. In addition, Clarke Connect, our dedicated division, specialises in providing tailored connectivity solutions to meet the growing demands of modern communication networks. Together, Clarke Telecom and Clarke Connect work seamlessly to deliver innovative and reliable services to our clients. xrnqpay Apply as soon as possible interviews will be conducted on a rolling basis, and this vacancy may close earlier than the stated deadline. Closing date: 8thMay 2026 Shortlist date: 9thMay 2026 Interview date: TBC

Maintenance Engineer £40,000 - £42,000 Wigan 06:00 - 14:00 / 14:00 - 22:00 / 22:00 - 06:00 (1-in-5 rotation) Overtime is paid in addition to basic salary. gap technical are looking for a Multiskilled Maintenance Engineer to join our clients team at a leading food manufacturing site. You will be responsible for ensuring the smooth operation of machinery, utilities, and site services while maintaining high standards of safety, quality, and hygiene. Performance Objectives Perform reactive maintenance to minimize production downtime. Carry out planned preventive maintenance (PPM) on mechanical and electrical equipment (if competent). Maintain site utilities, buildings, and support services, ensuring compliance with legal and safety standards. Support the installation, commissioning, and testing of new equipment. Collaborate with internal teams to ensure seamless communication and minimize disruption. Ensure that all work meets Food Safety, Health & Safety, and Hygiene standards.Person Specification HNC in Mechanical or Electrical Engineering. Proven experience in a similar engineering role at a competent level. Strong knowledge of health & safety and food safety regulations. Ability to work independently or as part of a team. A proactive, problem-solving mindset and a collaborative approach to tasks.Apply Please send your CV via the Apply now option on the website If you have any questions or are intere...

Location: Wigan & Surrounding Areas Contract Type: Permanent Hours: 40 hours per week Salary: £43,000 – £50,000 per year We are currently seeking an experienced Commercial Gas Engineer to join a busy and growing mechanical services team operating across the North West. This is a full-time, permanent position focused exclusively on commercial and retail sites — no domestic work. Key Responsibilities: * Attend reactive breakdowns and diagnose faults on commercial gas appliances and associated plant * Complete reactive repairs and follow-up works * Carry out planned servicing of gas appliances and systems * Complete all gas safety documentation accurately and in a timely manner What We’re Looking For: * Minimum 5 years’ experience in commercial gas maintenance and breakdowns * Valid Commercial ACS certification (essential) * Domestic ACS, OFTEC, or oil experience (advantageous but not essential) * Full UK driving licence (essential) * Additional certifications such as IPAF, PASMA, CSCS are desirable * Strong fault-finding skills and ability to work independently What’s on Offer: * £43,000 – £50,000 base salary * Company vehicle with fuel card (private use available) * 28 days holiday (including bank holidays) * Regular overtime and call-out bonuses * Company pension * Flexitime available * Co...

Mobile Refrigeration Engineer Manchester Area Up to £51,000 + Door to Door Travel Before applying for this role, please read the following information about this opportunity found below. The Opportunity: We are currently recruiting on behalf of a leading FM & refrigeration services provider for an experienced Mobile Refrigeration Engineer. Youll be joining a highly respected business, working on a long-term contract covering supermarket stores across Manchester. This is an excellent opportunity for a skilled engineer seeking stability and a competitive package. Key Responsibilities: • Service, maintenance, and repair of refrigeration systems across multiple retail sites, • Fault-finding and ensuring minimal downtime on critical systems, • Working to planned and reactive maintenance schedules, • Ensuring compliance with company and client safety standards Requirements: • Proven background in refrigeration engineering (Supermarket experience desirable), • Preferably Co2 experience, • Strong fault-finding and diagnostic xrnqpay skills, • Full UK Driving Licence Whats on Offer: • Salary £51,000 per annum, • Fully equipped company van + fuel card, • Standby allowance Incorporated in Salary (1-in-4 rota), • Excellent company benefits package, • Long-term, secure contract with a market-leading FM provider

Job Reference:940 Scroll down for a complete overview of what this job will require Are you the right candidate for this opportunity Job Title:Senior Drainage Engineer Salary:£39,500 per annum Location:Manchester, Northwest Job Type:Technical/ Engineering Working Hours:Monday Friday, 7:00am-5:00pm Job Summary Were looking for a passionate and dedicated Senior Drainage Engineerto join our clients team. In this role, youll complete a wide range of services across a mixed commercial, residential & retail portfolio in the Northwest. Key Responsibilities • Responding to reactive drainage callouts including blocked drains, toilets, sinks, and external drainage systems., • High pressure water jetting to clear blockages and maintain drainage systems., • Carrying out CCTV drain surveys to identify faults such as collapses, root ingress, or blockages., • Drain repairs and maintenance, including patch lining, pipe repairs, and minor excavation works., • Planned Preventative Maintenance (PPM) on drainage systems across commercial and residential sites., • Working on internal and external drainage systems, including stacks, soil pipes, manholes, and underground pipework., • Diagnosing drainage faults and recommending repairs to clients or management., • Completing reports and job sheets following surveys, repairs, or maintenance work., • Ensuring all work is carried out safely, including working in confined spaces and following health & safety procedures., • Liaising with clients or site managers while on site to provide updates on works being carried out.Requirements, • City & Guilds Level 2&3 in Plumbing Desired, • HPJW Ticket, • X2 References, • 5 years experience in a similar position, • Clean UK Drivers License, • Right to work in the UKWhats on Offer, • 25 Days Holiday + Bank holidays, • Van & Fuel Card, • Travel pay, • Training and progression

National Highways have an excellent opportunity for multiple Senior Structures Advisors to join our Engineering Division within Safety, Engineering and Standards (SES). As a Senior Advisor, you will provide specialist and complex technical advice and guidance to support the safe and efficient operation, maintenance, and modernisation of the Strategic Road Network. The Senior Advisor will also develop and implement policies, standards, operating procedures, and best practices, and provide specialist technical advice and guidance; to support the development, renewal, and maintenance of National Highways assets. Ensure all your application information is up to date and in order before applying for this opportunity. Our team within SES is recognised for developing world leading standards and for providing expert advice and technical assurance in the field of bridge engineering and this is an excellent opportunity to join an organisation that is leading the profession, with a structures asset stock valued at more than £49bn and with a long-term committed funding stream. Please note this role can be based from any of our UK offices however, frequent travel to regional offices such as Guildford and Manchester to attend team meetings will be required. • Act as a source of specialist subject matter expertise on structural engineering and solve a range of bridge and other highway structure engineering problems., • Ownership and development of standards, contributing to the development of structures policy and providing technical advice internally and externally to users of the standards., • Providing authoritative technical advice and guidance to Operations and Major Projects Directorates and represent the interests of National Highways to external stakeholders., • Representing the Technical Approval Authority and ensuring application of CG 300 technical governance to highway structures., • High level review of design, assessment and strengthening principles of new and existing structures., • A Chartered qualified Engineer (CEng, MICE, AMIStructE, MIStructE (or equivalent) or Incorporated Engineer (or equivalent) with relevant experience., • Extensive knowledge within the discipline with technical expertise and experience in delivery (or policy development) of design, assessment, and development of technical solutions for management of structures., • Extensive knowledge of the DMRB, Eurocodes and their application., • Experience of working independently and taking responsibility of delivery of complex bridge structures projects. Here at National Highways, we manage and improve England's motorways and major A roads, helping our customers have safer, smoother, and more reliable journeys. Our priorities are safety, customers, and delivery, and at the core of this, are our values of passion, integrity, safety, teamwork, and ownership. Safety, Engineering and Standards (SES) focuses on supporting outstanding operational delivery and providing expert technical advice for our road network. We also deliver essential services that lead, enable, and drive innovation in the development of the Strategic Road Network, while offering expert guidance on health and safety matters. External candidates will be offered a starting salary at the lower end of the pay scale, while current employees will be appointed in accordance with our established pay policy. xrnqpay We are committed to creating a diverse environment and welcome applicants from all backgrounds.

Commissioning Engineer Hit Apply below to send your application for consideration Ensure that your CV is up to date, and that you have read the job specs first. Manchester, UK Contract or Full time Permanent hire Customer Note: HV substations during construction, outage, and commissioning phases. Site-based commissioning activities. 10 hours/day with 6 days/week and 11 days/fortnight rotations for onshore stations. 12 hours/day, 14 days rotation for offshore stations. Job Description The Commissioning Engineer is responsible for executing, and completing the commissioning of HV substations to ensure that all primary and secondary systems are installed, tested, and energised safely, in accordance with project specifications, statutory regulations, and client requirements. Commissioning Execution Plan and carry out interface commissioning activities for transformers, switchgear, protection, control, and auxiliary systems. Execute commissioning in accordance with approved Commissioning Strategies, Inspection & Test Plans (ITPs), and Method Statements. Coordinate commissioning activities across construction, protection, control, SCADA, and client teams to achieve safe energisation milestones. Primary Equipment Commissioning HV and MV equipment interface commissioning including: Power transformers and auxiliary transformers HV/MV switchgear (AIS, GIS) Circuit breakers, disconnectors, earth switches Current transformers (CTs) and voltage transformers (VTs) Perform functional and operational checks prior to energisation. Protection, Control & SCADA Carry out testing and commissioning of protection and control schemes, including: Differential, distance, overcurrent, busbar, and transformer protection Inter-tripping, interlocking, alarms, and indications Perform secondary and primary injection testing using approved test equipment. Verify SCADA, remote control, and IEC?61850 communication where applicable. Safety and Compliance Carry out all commissioning activities in strict compliance with: Client and companys Safety Rules and EHS procedures Approved method statements and risk assessments Maintain safe systems of work when interfacing with live or adjacent HV plant. Stop work and escalate any unsafe conditions, non compliances, or protection anomalies. Documentation & Quality Produce, review, and sign off protection test records, relay settings verification sheets, and commissioning certificates. Ensure test results comply with approved Inspection & Test Plans (ITPs). Support resolution and closure of commissioning defects and punch list items. Contribute to as built documentation and handover packs. Interface & Support Lead Commissioning Engineer Site Manager Client commissioning teams Support commissioning panels, energisation reviews, and outage planning activities. xrnqpay Provide technical input during fault investigations or commissioning issues. Authorisations CAT-1 for non-energised SSEN stations and CAT-3 for energised SSEN stations NGP for non-energised NG stations and NGCP for energised NG stations CCNSG or equivalent ticket

Engineering Manager – Water Do not pass up this chance, apply quickly if your experience and skills match what is in the following description. Permanent or Contract Manchester M32 Location & Working Arrangements • Full-time, • Occasional site visits (travel expenses reimbursed) Manage a multi-disciplinary engineering team and lead the delivery of water industry designs, ensuring time, quality, safety, and client expectations are met. Key Responsibilities • Direct, mentor, and develop multi-disciplinary engineers, CAD technicians, and graduates., • Identify, develop, and implement safe, efficient, and value-engineered design solutions; communicate these effectively to clients and project teams., • Act as the Professional Head for the design function., • Guide design activities to ensure compliance with relevant technical, professional, and water company standards; approve design packages., • Identify and implement appropriate software tools; promote the use of BIM and 3D modelling where required., • Manage the production of integrated design deliverables that meet safety and quality requirements., • Review, interpret, and brief teams on standards, procedures, and updates., • Ensure design deliverables are completed within agreed timescales, budgets, and formal processes., • Ensure all project changes affecting design packages are fully recorded., • Minimum 10 years' experience in the regulated water industry., • Graduate-level education or HND., • Good level of IT proficiency., • Chartered Engineer., • Strong desire to take a leading role within the engineering design team., • Understanding of MEICA, civil, and process design disciplines., • Proven track record managing multi-disciplinary design teams and projects., • Strong Communication skills — effectively engage with clients and teams., • Results-focused approach with a commitment to delivering quality on time., • In-depth Technical knowledge of water industry engineering and design standards., • Ability to develop self and others, fostering team growth and professional development., • Effective Problem-solving capabilities to address complex design challenges. At First Recruitment Group we understand just how important it is to secure the right people. That is why our Recruitment Consultants always take the time to understand requirements in detail and offer sound advice to both clients and candidates. We actively recruit at all levels and this is a superb opportunity for an Engineering Manager looking for new employment. xrnqpay As part of putting people first, we strive to be an equal opportunities employer and we are always looking to increase the diversity of our workforce, working closely with our clients to ensure everyone is included.

HGV Technician / HGV Mechanic Ready to apply Before you do, make sure to read all the details pertaining to this job in the description below. Location:Warrington area Salary- £49,500 to £52,500 +OT Shifts Available: Duties: • Diagnose, repair, and maintain heavy goods vehicles (HGVs) to the highest standards of quality and safety., • Perform inspections, routine maintenance, and repairs on various HGV/Trailers., • Use your technical expertise to troubleshoot and resolve complex mechanical and electrical issues., • Collaborate with the team to ensure efficient workflow and exceptional service delivery., • NVQ Level 3 (will also consider time served applicants)., • Ability to use diagnostic tools and software RSD Recruitment are a leading Recruitment agency specialising in the HGV industry including all aspects of HGV, Automotive, Motor trade, Engineering and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter

1825 / 1826CW Any additional information you require for this job can be found in the below text Make sure to read thoroughly, then apply. Derby / Grangemouth Join Our Team as a System Integration Engineer Are you passionate about delivering innovative control system solutions and eager to work on impactful infrastructure projects? As a System Integration Engineer, you will play a critical role in designing, developing, testing, and commissioning control systems that support vital industries such as Water & Wastewater, Power & Energy, and more. This is an exciting opportunity to be part of a leading UK-based multidisciplinary contractor, supporting your growth while making a real difference in infrastructure services. Required Skills: • Hands-on experience with Rockwell, Mitsubishi, or Schneider control systems, • Strong background in Water & Wastewater treatment projects, • Proficiency in interpreting client standards and user requirements, • Excellent communication skills and solid project management abilities, • Practical, commercially aware approach to engineering solutions, • Industry-recognized training or qualifications in control systems engineering, • Willingness to undertake site visits across the UK

AV Installation Engineer Qualifications, skills, and all relevant experience needed for this role can be found in the full description below. Location South of England (field-based role requiring travel across South East & South West regions) Salary Package Competitive salary plus large company benefits, a broad flexible benefits scheme, and two paid volunteering days per year Working Hours 9.00 am - 5.30 pm, Monday - Friday Overview Our client is looking for an Installation Engineer to join a well-established and growing organisation delivering high-quality audio-visual solutions. This is a great opportunity to secure long-term career stability and progression within a respected business that invests in its people, training, and development. We are proud to be supporting our client with this opportunity. This is a field-based role covering client sites across the South of England, including both the South East and South West, depending on project requirements. Role Purpose The Audio-Visual Installation Engineer is responsible for the installation of audio-visual systems across customer environments. This role requires hands-on installation experience, strong attention to detail, and the ability to work effectively with internal teams and subcontractors to deliver high-quality AV solutions. Key Responsibilities Install a variety of AV equipment including projectors, screens, speakers, microphones, video conferencing systems, and control systems Ensure all equipment is installed in line with manufacturer specifications and internal quality standards Read and work from elevation drawings, schematic diagrams, and blueprints Adhere to all health and safety protocols during installations Ensure compliance with company policies and procedures Maintain company vehicle checks and servicing requirements Ensure personal xrnqpay PPE and tools are safe, maintained, and replaced where required Work collaboratively with colleagues and subcontractors on site Participate in training programmes and ongoing professional development Skills and Experience Proven experience in AV installations Ability to interpret and work from technical drawings and schematics Basic fault-finding and problem-solving skills Strong communication and interpersonal skills Ability to work independently and as part of a team Full UK driving licence and willingness to travel extensively across the South of England

£40,100 (min 10 hours paid whilst working away) Do not pass up this chance, apply quickly if your experience and skills match what is in the following description. Established and well- respected company Excellent working environment Has a credible record of long-term staff members Standard hours of work Monday to Friday 8am-4pm Our client, based in Tameside has a reputation for innovation and they consistently lead in their chosen industry sector. Due to continued growth, we are looking to recruit an experienced Commissioning Engineer to work on projects ranging from 433v through to 33kV. The role will involve commission testing of switchgear, protection relays, CT's, VT's and cabling etc up to 33kV alongside all testing required for the adoption of switchgear and cabling by any host DNO/client. The candidate will be required to maintain, install and modify Switchgear. and be able to read wiring diagrams. They must have some experience in working in electrical substations. As the commissioning engineer, you would be expected to lead the job, be the customers first point of contact and be able to provide technical assistance. Key duties; Be able to carry out the following testing; -Insulation resistance cables -D.C. pressure and VLF testing cables -Insulation resistance testing of switchgear and transformers -A.C. flash testing of switchgear up to and over 3.3kV -A.C. flash testing of transformers -Ductor testing of switchgear and busbars -Understanding Wiring and schematic diagrams Be able to carry out the commissioning of: -Primary injection testing CTs and VTs -ACBs VCBs OCBs & GCBs -Magnetisation curve testing -G59 testing -Scheme testing and fault finding -Battery discharge testing -Over current and earth fault relay testing -Primary injection testing -Differential protection -Unit protection, Transformer protection, Distance protection, Motor protection -REF To be considered for this position the successful candidate must have; Electrical engineering experience Emergency First Aid Training ECS-CSCS xrnqpay CCNSG Contractors safety passport Have familiarity working within a HV Substation in a live environment Self-motivated with total commitment to deadlines, Excellent organisational and communication skills and proven attention to detail Full UK driving licence The Company Permanent contract and a rewarding career Ongoing professional development and training Fully expensed company vehicle and fuel card 25 days annual leave plus bank holidays Next Steps If you have the required skills and experience and would like more information, please send your CV in confidence to Tracey McDermott at The Recruitment Fix Ltd.

We are currently looking for a skilled and motivatedField Service Engineerto join our growing team. This is a field-based role, ideal for someone who enjoys working independently, travelling to customer sites, and providing hands-on technical support. Scroll down to find the complete details of the job offer, including experience required and associated duties and tasks. You will be responsible for the installation, commissioning, servicing, validation, and repair ofindustrial metal detectors,ensuring customers receive a high standard of service and support. Key Responsibilities • Commission and installCEIA metal detectorsat customer sites UK wide, with some travel to Ireland., • Deliver on-sitecustomer trainingon metal detction equipment operation and best practices, • Carry outperformance validationon all makes of industrial metal detectors, • Performcalibration of checkweighers, • Diagnose faults and carry outrepairson industrial metal detection equipment, • Complete service reports and documentation accurately, • Provide excellent customer service and technical support The ideal candidate will have: • Previous experience in asimilar Field Service Engineer role(preferred), • Experience working withindustrial inspection equipment, metal detectors, or checkweighers would be advantageous, • Strong fault-finding and problem-solving skills, • Excellent communication and customer-facing skills, • Ability to work independently and manage travel effectively, • Afull UK driving licence, • Competitive starting salary from£32,000 per annum, • Bonus scheme, • Company pension, • Company vehicle, • Company laptop/phone/Ipad, • Work wear and tools provided., • Ongoing training and career development, • Opportunity to join a supportive and growing team

ABOUT YOU Below covers everything you need to know about what this opportunity entails, as well as what is expected from applicants. As the Certification Engineer, you will have strong analytical skills, enabling you to review technical documentation, make sound engineering judgements, and support certification decisions. Organised and detail-oriented, you can manage multiple projects while collaborating effectively with colleagues and clients. Required skills and experience: • Degree in electrical engineering or equivalent in terms of education, experience, or training., • Experience in testing and/or certification of electrical products., • Experience with switchgear and control gear products and standards (IEC 61439 series)., • Ability to make sound engineering judgements based on relevant professional experience., • Ability to scrutinise and compare technical documents., • Good IT literacy skills (Microsoft Office). ABOUT THE OPPORTUNITY As the Certification Engineer you will help coordinate the company's product certification activities and take an active role in the product certification process for our ASTA certification schemes. Key activities: • Conducting certification activities (Recommendation and Certification Decision) for all schemes., • Preparation, review and authorisation of test programmes., • Creation and checking of certificates and technical reports., • Assessment of laboratories to ISO 17025 and Intertek Requirements., • Witnessing of testing activities undertaken as part of the ASTA schemes., • Processing and management of enquiries, quotations and orders for type testing and certification., • Regular monitoring of project status including discussions with colleagues in other offices., • Supporting of sales teams to progress the technical aspects of the sales process., • Liaising with clients, including the development of professional relationships and providing technical support., • Undertaking project work primarily for products within the IEC 61439 series of standards. WHAT WE OFFER Join Intertek and become part of our global network of inspiring and entrepreneurial colleagues. We are a global family that values diversity and we thrive working together with precision, pace, and passion. We are working to make the world Ever Better, ensuring the quality, safety and sustainability of products and services used by millions of people around the world. • Competitive salary/benefits, • Development and career opportunities around the Globe, • Working in a highly motivated team and dynamic working environment We are an Equal Opportunity Employer who do not discriminate against applicants. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex or national origin. xrnqpay Intertek operates a preferred supplier arrangement, and we do not accept unsolicited approaches from agencies.

Simply Recruitment is working with our client in Greater Manchester, who is looking for a CNC Setter/Operator to join their growing team, permanently, on a 4- day working week. Role Overview An excellent opportunity has arisen for a skilled CNC Setter/Operator to join the metal fabrication department. The successful candidate will be responsible for setting and operating CNC punch press and press brake equipment to manufacture precision metal components for electrical enclosures and distribution equipment. This is a hands-on skilled engineering role requiring expertise in CNC metal fabrication, the ability to read technical drawings, and experience with precision measuring equipment. Working in a specialised production environment means every job is different, offering variety and the opportunity to use your technical skills across diverse projects. You will also play a key role in training other operators and apprentices, ensuring safe and efficient operation of machinery. Working Pattern Monday Wednesday: 06:00 15:45 | Thursday: 06:00 15:15 Salary £32,300 per annum Benefits Package Competitive salary 4- day working week Permanent position with established manufacturing business Working with modern CNC equipment Training and development opportunities Part of global engineering group Varied and interesting work in custom manufacturing environment Key Responsibilities Set and operate CNC punch press and CNC press brake machines to manufacture metal components Set up modern paint plant equipment Download programs and engineering drawings from database using PC Read and interpret technical engineering drawings to ensure work meets specification Use precision measuring equipment including verniers, micrometers, and gauges to verify dimensions and tolerances Set up tooling, fixtures, and machine parameters for each production run Perform first-off inspections to ensure parts meet drawing specifications Train other employees and apprentices on safe machine operation Update GEMBA production recording system efficiently and accurately Carry out and record daily safety checks and TPM maintenance schedules Troubleshoot machine issues and make adjustments to maintain quality Work with minimum supervision and provide clear instructions to operators Support continuous improvement initiatives and contribute suggestions Comply with all health and safety procedures and company policies Essential Requirements Time-served engineer or completed engineering apprenticeship Minimum 3 years post-training experience operating CNC press brake or CNC punch press (essential requirement) Expert knowledge of either CNC press brake bending or CNC punch press operation Ability to read and interpret technical engineering drawings Proficient use of precision measuring equipment including verniers and micrometers Mechanically minded with strong problem-solving skills Good IT skills for downloading programs and using computer systems Good standard of maths and numeracy Quick learner with ability to adapt to different jobs Ability to work with minimum supervision Hardworking, reliable, and well-organised Able to communicate at all levels Calm under pressure with flexible approach to varied workload Desirable Skills & Experience Experience with both CNC press brake and CNC punch press Welding and fabrication experience Previous CNC programming experience Experience training and mentoring other operators Electrical enclosure or sheet metal fabrication background To Apply For more information or to apply for this position, please click apply TPBN1_UKTJ

Job Specification: Utilities Engineer / Maintenance TechnicianRole Overview Reporting to the Team Leader, the Utilities Engineer will provide reactive and planned maintenance support across a production facility. The role requires collaboration with multiple trades, ensuring utility systems operate efficiently and safely. Key Responsibilities • Escalate operational or maintenance issues to the Team Leader as required., • Assist other skilled trades with maintenance, testing, inspections, repairs, and installations., • Maintain utility service levels to support uninterrupted production., • Serve as first responder for site utility systems, including:, • Steam and condensate networks, • High and low-pressure compressed air, • Water treatment and distribution, • Effluent management systems, • Chemical dosing and delivery, • Cooling systems and water hygiene management, • Building Management Systems (BMS), • Air handling and fixed cooling equipment, • Ensure compliance with health, safety, and statutory requirements for all assets., • Conduct regular site monitoring to support environmental and operational compliance., • Participate in emergency response, including extended cover, call-outs, and remote monitoring., • Apply analytical skills to troubleshoot and resolve faults., • Work in line with established safety, health, environmental, and quality (SHEQ) standards., • Assist with machine setups and align operations with production requirements. xrnqpay, • Maintain a proactive, problem-solving mindset and promote teamwork.Candidate Profile, • NVQ Level 3 or equivalent apprenticeship in Engineering, • BOAS Industrial Boiler Operator certification (Category 2) or equivalent preferred, • Strong commitment to safe working practices, • Ability to read and interpret engineering diagrams and mechanical drawings, • Experience with digital maintenance planning and tracking tools, • Effective verbal and written communication skills across all organizational levels, • Excellent time management and flexibility to meet operational demands

Electrical Design Engineer Before applying for this role, please read the following information about this opportunity found below. Locations: Manchester (Hybrid working available) Company: Morson Praxis (part of the Morson Group) Morson Praxis is a leading engineering and design consultancy delivering complex, safety-critical projects across the energy, nuclear, defence, infrastructure and industrial sectors. Due to continued growth, we are looking for Electrical Design Engineers at all levels to join our team. You will act as the Electrical Designer on projects up to 132kV, delivering designs from concept through to commissioning and handover. Working closely with project, construction and design managers, you'll help ensure projects are delivered safely, on time, to budget and to the highest quality standards. Key Responsibilities Electrical design of HV/LV systems including substations (132kV, 33kV, 11/6.6kV) Lead and manage design activities across the full project lifecycle Produce design documentation, technical specifications and protection settings Support project delivery in line with programme, cost and quality targets Liaise with internal teams, contractors and stakeholders Contribute to design standards, innovation and continuous improvement About You HNC or higher in Electrical Engineering (degree xrnqpay and chartership desirable) Strong knowledge of HV distribution systems, substations and protection Experience within the electricity transmission or distribution sector Working knowledge of CDM regulations Proficient in AutoCAD and MS Office (Excel essential) Experience with power system studies/protection calculations desirable Strong communication skills and a proactive, adaptable approach

Are you a Maintenance Engineer with mechanical, electrical, pneumatic and hydraulic experience? Do you have previous experience working on production machinery or injection moulding machinery? If so, this Maintenance Engineer role is perfect for you! Have you got what it takes to succeed The following information should be read carefully by all candidates. This Maintenance Engineer role is working for an injection moulding company based in Rochester. The role is Monday to Thursday, working a 39hr week. The position is paying up to £42,000 depending on experience. The Maintenance Engineer will be responsible for carrying out planned preventative maintenance across injection moulding machines, robotics and associated equipment, ensuring all machinery is running efficiently and ready to meet production demands. Youll respond quickly to breakdowns, diagnosing faults and carrying out both electrical and mechanical repairs, including work on hydraulics and pneumatics, to minimise downtime. Alongside reactive maintenance, youll maintain accurate records and support continuous improvement initiatives, working closely with production and engineering teams to enhance overall performance and reliability. The role will also involve supporting the installation and commissioning of new equipment, managing spare parts availability and ensuring all work is carried out in line with health and safety standards. xrnqpay You will need: Previous experience in a similar Maintenance Engineer position Experience with production/manufacturing machinery, ideally injection moulding machinery Strong mechanical and electrical fault finding Knowledge of hydraulics, pneumatics, robotics and automation To be able to read/interpret electrical schematics and technical drawings PLC experience is desired 18th Edition is beneficial If you are interested in this role and think you have the skills and experience this company are looking for thenAPPLY NOW.Alternatively, please callTom Jones at Kingdom People on . Kingdom People is acting within the capacity of a Recruitment Agency for their client

Principal Structural Engineer Before applying for this role, please read the following information about this opportunity found below. Location: Manchester (Hybrid working, 3 to 4 days a week onsite) Contract: 12 month contract Rate: £400 to £490 per day (outside IR35) We are currently recruiting for a Principal Structural Engineer to join a growing engineering consultancy delivering major infrastructure projects across the rail and water sectors. This is an excellent opportunity to work on technically challenging projects while leading structural design delivery within an experienced multidisciplinary team. The Role As a Principal Structural Engineer, you will be responsible for providing technical leadership and ensuring high-quality structural design delivery across a range of infrastructure projects. You will work closely with clients, project teams, and junior engineers to develop safe, efficient, and compliant structural solutions. Key responsibilities include: • Ensuring the design team produces deliverables that meet safety and quality requirements, • Approving design deliverables, design risk assessments, reports, and specifications, • Identifying efficient structural design solutions from project scopes and site visits, • Leading and developing engineers, CAD technicians, and graduates, • Estimating engineering hours for design work packages, • Acting as Responsible Engineer / CRE on selected projects, • Projects are delivered across the UK rail and water sectors, including:, • Bridge repair and strengthening designs, • New-build service reservoirs, • Foundations for overhead line equipment (OLE) Design of reinforced concrete detention tanks used to store sewage during storm conditions. xrnqpay These structures typically include: • Reinforced concrete shafts, • Diameters exceeding 10 metres, • Minimum 10 years' structural design experience at Senior or Principal level, • Strong experience in regulated infrastructure sectors, such as:, • Rail, • Water, • Oil & Gas, • Nuclear, • Highways, • Bridges, • Chartered Engineer (CEng) status, • Degree or HND in Civil/Structural Engineering, • Strong understanding of engineering drawing practices, • Awareness of construction methods and materials, • Strong technical structural engineering knowledge, • Excellent communication and stakeholder engagement, • Ability to lead and mentor engineers, • Strong problem-solving and analytical skills

An established engineering consultancy business is seeking an experienced Principal/Senior Civil Design Engineer to support the delivery of civil design solutions across regulated clean and wastewater projects in the UK. Produce civil design deliverables that meet safety, quality and regulatory requ

WELCOME TO LINAKER Increase your chances of an interview by reading the following overview of this role before making an application. For over 30 years, Linaker has built a reputation for delivering dependable, high-quality mechanical engineering services across a wide range of client environments. Our strength lies in keeping critical systems operationalsupporting organisations with technical precision, responsive maintenance, and long-term reliability. Founded on trust, care, and reliability, were more than a service providerwere a fully embedded partner in our clients operations. ABOUT THE ROLE We are looking for a reliable and experienced Multi-Skilled Mobile Engineer with both Commercial Gas and Electrical experience to support our growing maintenance portfolio across commercial and retail environments. The successful candidate will deliver both planned preventative maintenance (PPM) and reactive maintenance across a range of building services including gas, electrical and associated mechanical plant. The role requires a technically competent engineer who is comfortable carrying out fault finding, testing, servicing and repair of building systems, while ensuring all work is completed safely, compliantly and to a high standard. You will work across multiple sites providing a professional service while maintaining strong communication with the client, helpdesk and account management teams, ensuring contractual obligations, SLAs and KPIs are achieved. This role requires a proactive engineer who can operate independently, produce quotations for remedial works and maintain accurate records using the CAFM system. WHAT YOU WILL BE RESPONSIBLE FOR WITHIN YOUR SPECIFIED AREA Planned Preventative Maintenance Completion of PPM tasks in line with contract schedules and SFG20 standards Servicing and maintenance of commercial gas appliances, electrical systems and associated plant Ensuring all maintenance activities are delivered efficiently and proactively Maintaining accurate site logbooks and asset records Reactive Maintenance & Repairs Diagnose faults across gas, electrical and building services systems Carry out effective repairs to minimise downtime Ensure breakdowns are diagnosed quickly and resolved safely Electrical Works Electrical testing, inspection and fault finding General electrical maintenance and small installation works Ensuring compliance with BS7671 wiring regulations Completion of certification and documentation where required Gas Maintenance Servicing and maintenance of commercial gas appliances and heating systems Combustion performance analysis and safe operation checks Compliance with Gas Safe regulations and current legislation Quotations & Commercial Awareness Production of accurate quotations including: Correct parts identification Labour estimates Clear scope of works Deliver works profitably while maintaining quality and customer satisfaction Compliance & Health and Safety Work in accordance with all health, safety, environmental and compliance requirements Ensure all gas and electrical works meet statutory regulations and company policies Maintain safe systems of work at all times Communication & Client Liaison Maintain strong communication with: Clients Helpdesk teams Engineering and Account Managers Represent Linaker professionally on site Build strong relationships with stakeholders Documentation & Reporting Record and document all works via the CAFM system Maintain site logbooks and service documentation Provide clear reports on faults, repairs and follow-up actions Asset & Equipment Care Ensure tools, calibration equipment and company assets are maintained correctly Maintain van stock levels and ensure essential parts are available Report damage or defects to equipment promptly General Duties Ensure contractual SLAs and KPIs are achieved Promote high standards through personal conduct and workmanship Participate in the out-of-hours call rota Carry out any other reasonable duties required to support the business WHAT WE ARE LOOKING FOR Essential Qualifications Gas Qualifications * COCN1 Core Commercial Gas Safety * CCN1 Core Domestic Natural Gas Safety * CODNCO1 Changeover Domestic to Non-Domestic Core * CIGA1 Indirect Gas-Fired Heating Appliances * CDGA1 Direct Gas-Fired Heating Appliances * CPA1 Combustion Performance Analysis * ICPN1 Gas Pipework Installation * TPCP1 / TPCP1A Testing & Purging Electrical Qualifications * NVQ Level 3 Electrical Installation or equivalent * City & Guilds Electrical Apprenticeship or equivalent * 18th Edition Wiring Regulations (BS7671) Experience * 35 years experience within commercial building services or FM maintenance * Strong diagnostic and fault-finding capability * Experience working within a mobile facilities maintenance environment Desirable Qualifications * City & Guilds 2391 Testing & Inspection * ECS Gold Card * CKR1 Gas Cooking Appliances * CORT1 Radiant Tube Heaters * CCCN1 Catering Appliances * Legionella Awareness * Asbestos Awareness * IPAF * PASMA * Thermography qualification * Portable Appliance Testing qualification * IOSH Working Safely * First Aid at Work * Electrical qualifications in EV charging, solar PV or battery storage THE PACKAGE 25 Days annual leave plus bank holidays. Buy and sell holiday to suit your schedule. One paid volunteering day per year, empowering you to support causes that matter to you. Company Van for site travel. Access to our Employee assistant programme for wellbeing support. Auto enrolment in the company pension scheme. Full training by a supportive friendly team. Annual events. INTERESTED This is a fantastic opportunity to lead and develop a team of engineers in a business thats growing fast and investing in talent. xrnqpay If youre ready to step into a pivotal role, influence outcomes, and build something meaningful, wed love to hear from you. If you think youre a match, get in touch today EQUAL OPPORTUNITIES Linaker Limited is an equal opportunities employer committed to diversity and inclusion. We welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation, or age.

A leading engineering firm in Bolton is seeking an Engineer Surveyor to carry out inspections on mechanical equipment, ensuring safety and compliance.

World Class Defence Organisation is currently looking to recruit an Electrical Systems Engineer / Architect subcontractor on an initial 12 month contract. Your base site can either be from the companies Bristol, Stevenage or Bolton office. This role will be a hybrid position – 3 days per week onsite and 2 days remote. Hourly Rate: £60 - £85 (Umbrella). Contract Duration: 6 Months initially and then ongoing and long-term thereafter. Missile Electronic Architect Job Description: Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It’s an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: Specifying/determining system electrical requirements interface definitions and characteristics between subsystems/equipment power architecture, including power budget and power profiles data communication and processing architecture requirements for EMC, bonding, grounding and screening signal safety, including routing of safety related signals Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration Reviewing and authoring reports, guidelines and processes Design assessments and analysis Working to defence/industry standards Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: Project manage the equipment(s) on behalf of the project during development, qualification and manufacture Own the requirements on behalf of the project for the equipment(s) Produce Statement(s) of Work for the associated design authority for the equipment(s) Create and update plans showing activities for the equipment(s) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance Hold regular progress reviews with the design authority for the equipment(s) Review qualification verification evidence Track and find resolution to equipment non-compliances Attend and support design reviews Skillset/experience required: Technical experience required: electrical/electronics interface definitions knowledge of defence/industry standards, etc. degree level qualification in a related subject systems engineering writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: defence weapon systems power supplies actuators data communication sensors EMC Health Usage Monitoring Systems (HUMS) Model Based Engineering (MBE)

=We are looking for a Fire and Security Installations Engineer to work on a permanent basis in Wigan. The role will be covering the North West area. Salary is c£34-40,000 per annum plus overtime/on-call opportunities, 25 days' holiday plus bank holidays, Company Vehicle and Fuel card, Power tools, Laptop, phone, pension etc. Fire and Security Installations Engineer Duties/Experience At least three years hands-on experience working with electronic security and life safety systems, ideally within an NSI-approved organisation Strong capability in installing, configuring, and commissioning a wide range of fire and security systems Proven ability to carry out servicing, diagnostics, and fault resolution across multiple system types to a high standard Must be eligible to pass industry-standard screening checks, including BS7858, DBS, and relevant police vetting Working knowledge of leading manufacturers and platforms, such as Texecom, Dahua, Paxton, Videx, C-Tec, Advanced, Hochiki, Gent, Hikvision, or similar Solid understanding of IT infrastructure, networking fundamentals, and core electrical/electronic principles Prior involvement in managing or coordinating security-related projects Willingness to participate in an out-of-hours emergency call-out rota Additional Skills & Attributes for the Fire and Installations Engineer: Able to work independently with minimal supervision while contributing effectively within a team environment Capable of making sound decisions under time constraints Responsible for managing and maintaining stock levels within a company vehicle Consistently follows health and safety guidelines and works in a safe, compliant manner Completes required documentation accurately, both digitally and on paper Demonstrates reliability, organisation, and strong time management skills Complies with all internal policies and operational procedures Builds and maintains positive working relationships with customers and colleagues How to apply for the Fire and Installations Engineer: Please call Rebecca at Simply Recruitment Group or press APPLY NOW! TPBN1_UKTJ