Sea jobs in Letchworth Garden CityCreate job alerts

Guidant Global is proud to partner with a prestigious Ministry of Defence organisation in the UK. Our client is seeking an experienced Development and Production Test Engineer with a strong background in Electronic/Electrical engineering. In this crucial role, you will support the testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. Your expertise will be essential in providing technical support to the manufacturing test capability, ensuring that programme targets are met in terms of time, cost, and quality. Key Responsibilities: You will collaborate with a small team of dedicated engineers in a dynamic, yet friendly and inclusive manufacturing environment, where you will be responsible for the following tasks: • Provide test engineering support to operators on the shop floor, including the introduction of new test equipment., • Test and diagnose complex electrical/electronic systems, sub-assemblies, and circuit cards down to the component level., • Generate test specifications, operator instructions, and technical reports based on higher-level requirements and information., • Promptly identify remedial and corrective actions to ensure manufacturing continues in line with the programme following production test failures., • Support meetings with Quality and Operations to provide status updates on test engineering actions and investigations. What do you need?: Essential: • Minimum HNC/HND level of Engineering qualifications or equivalent., • Good understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to electronic component level., • Awareness of electrical/electronic sub-system and system design, integration and test principles., • Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports., • Ability to plan and organise one's work according to assigned priorities. Advantageous: • Knowledge of RF and Microwave technology at the subsystem level., • Experience in operating manual and automated test equipment in an Electronics Manufacturing environment., • CADMID product lifecycle for test equipment is desirable., • Environmental testing would also be an advantage., • High Voltage training/awareness., • SAP Beneficial, • MS Office skills What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This role is based at our client's headquarters in Stevenage, a key location for missile operations. The site offers excellent transportation links, an onsite gym, and a coffee shop. Training and development opportunities are available to all employees.

Pivotal to these roles is enabling the delivery of Sea Ceptor to multiple customers concurrently, whilst managing adaptations for an increasing number of export customers. This role is within the Weapon Systems Design & Verification team, delivering Verification activities to support multiple custom

Our client, a key partner to the UK Ministry of Defence, is seeking an experienced Electronics Design Engineer to join a high-performing team developing cutting-edge defence technologies. This role offers the opportunity to collaborate with multidisciplinary experts, drive innovation, and apply best practices to enhance product performance across complex missile systems. Key Responsibilities: Design and develop advanced electronic solutions for weapon systems, including onboard missile sub-systems and land, sea, and air-based firing units. Ensure product quality and performance standards are met throughout the development lifecycle. Provide accurate cost and schedule updates to the project manager to support effective project tracking. Demonstrate expertise in electronic design from concept through to production, with a strong focus on Power and Analog Electronics at both sub-system and board level. Collaborate cross-functionally with Software, Firmware, Mechanical, Environmental, and EMC teams to ensure design compliance with all technical and regulatory requirements. Contribute to the delivery of high-performance missile solutions that meet client expectations and operational demands. What do you need?: Possess a degree and significant experience in Electronic Design, development, and delivery after completion qualification. Demonstrate your ability to lead major electronic design projects and show your experience working with a diverse team. Be aware of the challenges that may arise and show your understanding of handling them. Problem-solving skills and in-depth knowledge of various electronic technologies and products. Excellent communication skills, both in writing and speaking, enable me to negotiate and influence stakeholders across the organisation effectively. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: Our clients relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air. This role is based at their headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees. TPBN1_UKTJ

As a trusted partner of the UKs Ministry of Defence, our client is at the forefront of advanced defence technology. This role sits within the Interconnects Team in Electronic Engineering (EE), a department dedicated to developing cutting-edge electronic capabilities and expertise. The Interconnects Team plays a critical role in delivering high-quality, timely design solutions by leveraging both established and emerging technologies to ensure customer satisfaction. Key Responsibilities: The Interconnects Team serves as the companys primary technical authority on interconnectivity, specialising in the design of cables and related systems. Known for combining deep technical expertise with a passion for design, the team plays a pivotal role in delivering innovative and reliable interconnect solutions across the business. Interpreting sub-system requirements to inform interconnect design. Creating electrical schematics and cable definitions using Zuken E3. Supporting and guiding E3 users and integrating Zuken E3 across the product lifecycle. Investigating a wide range of cable-related issues and developing effective solutions independently or collaboratively. Providing cross-functional support to resolve manufacturing challenges and assist with functional and environmental testing. What Do You Need?: Demonstrated experience (25 years) in using E3.Cable and associated tools such as E3.Formboard and E3.3D Transformer is highly desirable. Proven track record in defining, implementing, and optimizing design processes and best practices within E3, including electrical topology, schematic development, and 2D manufacturing standards. Strong capability in delivering technical training and support to E3 users, enhancing team proficiency and tool adoption. Solid understanding of product data and change management systems, particularly within Windchill or equivalent platforms. Skilled in designing cable assemblies that meet complex electrical and environmental specifications, including current load, shielding, signal integrity, voltage drop, and EMC compliance. Working knowledge of cable assembly production and process engineering principles. Excellent communication skills, both written and verbal, with the ability to convey technical information clearly. Familiarity with PTC CREO Cabling is advantageous. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This role is based at our client's headquarters in Stevenage, a key location for missile operations. The site offers excellent transportation links, an onsite gym, and a coffee shop. Training and development opportunities are available to all employees. TPBN1_UKTJ

Our client is a long-standing partner of the UK Ministry of Defence. They are currently searching for a highly experienced Missile Mechanical Architect to spearhead the gathering and managing missile mechanical architecture requirements. The primary objective of this role is to ensure that missile performance is achieved efficiently within the allocated time and cost while strictly adhering to layout requirements. The selected individual will expertly handle the verification evidence for missile performance, ensuring successful certification and robust defence of the design. This role entails supervising the mechanical architecture requirements and other associated responsibilities of the missile. Key Responsibilities: Establish the Missile Airframe Task Requirements Specification (TRS) for a structured and coherent mechanical response to the overall Missile TRS. Manage the mechanical interface with the launcher and ensure compliance. Define optimal mechanical architecture and interfaces for all missile variants to meet requirements. Implement GMA Policies for modularity and reuse objectives. Develop proving logic for validating the Airframe, ensuring mechanical compliance, and obtaining a missile certificate of design. Interface with customers and manage their expectations throughout the development process. Produce Statements of Work and plans for activities within the assigned responsibility. Provide direct technical supervision to engineers in the Team and indirect management to engineers in the extended project team. Control assigned budgets, manage personal workload, and identify resource needs. What do you need?: Degree-level education with 10 years experience in mechanical engineering or equivalent qualification with significant experience Technical management of internal and sub-contract activities Strong leadership skills, establishing clear engineering vision and strong interpersonal and communication skills (written and verbal) Knowledge and experience in mechanical missile design, including static and dynamic analysis, planning for the environment, and thermal management Understanding of broader engineering disciplines, including aerodynamics, testability, and production Experience in developing proving logic and managing compliance evidence for Certificates of Design Full product life cycle experience Ability to influence senior managers and stakeholders What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This role is based at our client's headquarters in Stevenage, a key location for missile operations. The site offers excellent transportation links, an onsite gym, and a coffee shop. Training and development opportunities are available to all employees. TPBN1_UKTJ

Our client, a trusted partner of the UK Ministry of Defence, is seeking a skilled Electrical Architect/Engineer to oversee all aspects of missile development, from initial concept to series production and in-service support. This is an excellent opportunity to enhance your engineering experience. As an experienced electrical architect/engineer, you will play a crucial role in designing the electrical architecture, missile system, and launcher requirements. Key Responsibilities: This involves defining the electrical architecture based on requirements, establishing the power architecture and safety design, defining interface characteristics between subsystems, determining requirements for EMC, bonding, grounding, and screening, supporting test activities, and reviewing and authoring guidelines and processes related to design. Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s), you will : Project manage the equipment(s) on behalf of the project during development, qualification, and manufacture Produce Statement(s) of Work for the associated design authority Technically manage internal & external suppliers to deliver the equipment(s) work packages to time, cost, quality, and performance requirements. Review qualification verification evidence and control assigned budget(s) for both activities and manage your workload. What do you need?: Technical Experience Required: Electrical/Electronics/Systems engineering (Essential) Interfaces; Data communication Knowledge of defence/industry standards, etc. HND or Degree level qualification in a related subject. Ideally, this would be within a defence-related background; however, experience within other engineering industries may be considered. Systems Engineering Writing reports Experience within these other areas is also of interest but not essential Power supplies; Sensors; Actuators; Defence; Weapon Systems Health Usage Monitoring Systems (HUMS) Model Based Engineering (MBE) EMC ATEX regulations. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance : British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: Our clients relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air. This role is based at their headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees. TPBN1_UKTJ

Our client is a trusted partner of the UK Ministry of Defence, and they are currently searching for an experienced Configuration Management professional to join their team. In this role, you will provide technical support to the Configuration Management team. Additionally, you will be required to build strong relationships with stakeholders to facilitate the development, review, and implementation of processes and procedures. Expertise in configuration management is critical to the success of developing and delivering quality engineered products to customers and end-users. As a configuration management expert, your role is essential in building trust and confidence in the program by ensuring the quality of all products produced. You will also provide technical guidance and support to project configuration managers, contributing to the overall success of the business programs by delivering excellence in technical solutions. Key Responsibilities: Partner across multiple business initiatives to ensure a consistent and integrated approach to Configuration Management (CM). Review project status and key milestones to provide tailored coaching on technical practices that support CM deliverables. Develop a deep understanding of business-specific CM processes to effectively embed and champion these within project teams. Enhance CM capability and knowledge across the Configuration Management function through continuous learning and best practice sharing. Collaborate closely with the CM Group Lead and team members, offering clear guidance and technical expertise while fostering a positive, inclusive, and high-performance culture. What do you need?: Demonstrated success within engineering environments or operational domains, with a strong technical grasp of the full product lifecycle and its critical delivery milestones. Extensive experience in Configuration Management within the Aerospace or Defence sector, including a proven history of leading CM activities across complex engineering programmes. Expert problem-solving and process optimisation skills, with the ability to define best practice and drive CM effectiveness to ensure accurate control of product data throughout development and production phases. Solid understanding of Product Lifecycle Management (PLM) tools and processes, enabling efficient and controlled evolution of product data. Committed to coaching and developing others, sharing knowledge and best practice to build capability and foster continuous improvement. Strong appreciation of compliance and external standards, ensuring alignment through robust, efficient business processes. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This role is based at our client's headquarters in Stevenage, a key location for missile operations. The site offers excellent transportation links, an onsite gym, and a coffee shop. Training and development opportunities are available to all employees. TPBN1_UKTJ

Systems Engineer - Undergraduate Placement 2026 Salary : £23,495 Dynamic (Hybrid Working): Where possible, we will seek to accommodate a blended approach to on-site and remote working. This may vary depending on the undergraduate role. Security clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. CLOSING DATE FOR THIS ROLE IS MIDNIGHT ON 5TH JANUARY 2026 (SUBJECT TO APPLICATION VOLUMES) What we can offer you 1 year placement: starting September 2026, that allows you to apply your university learning to real-world projects and technologies Company bonus : based on company performance and will vary year to year Pension : maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Annual Leave: 25 days plus option to purchase extra holiday Flexi Leave: up to 15 additional days Facilities : fantastic site facilities including subsidised meals, free car parking and much more... The opportunity Working within one of our Systems Design functions in Stevenage, you will be involved in concepting, designing, delivering and supporting the latest Complex Weapons capabilities for the UK and partner nation Armed Forces in response to advanced threats in all domains (Air, Land, Sea). You'll complete a placement based on a project that could be at any stage in a range of areas, from future capabilities to in-service products. Through the placement, we'll help you understand the make-up of a missile or a weapon system; from the warhead to the seeker in the missile to the wider weapon system components. These placements will enable you to understand the Systems Engineering 'V' model across the whole product lifecycle - including: Researching future technologies and novel domains; Developing requirements and functional architectures ; Creating concept solutions Analysing performance and supporting trade-off studies; Managing interfaces and integration of systems and sub-systems Proving and certification activities at Weapon and Missile system level Learning about technologies and customer needs associated with specific products or capabilities. Across the Systems Engineering domain, we offer exposure to a wide variety of different technologies, engineering methodologies, and customer needs associated with specific products or capabilities. This also offers a great opportunity to engage with internal and external customers. This role is suited to those that enjoy the creativity and practicality of working with problems to arrive at logical solutions. Our Systems Design function will support you to become a fully integrated member of the team with the opportunity to assume an increasing level of responsibility. We offer varied roles with scope to choose placements based on interests and skills. Our people are adaptable and the role is varied and fast paced - Innovation is a company value that we practice the most. Systems Engineers work with people across all engineering fields and business teams, meeting suppliers and customers and engaging with international MBDA colleagues. There is also Opportunity to travel both within the UK and potentially internationally. What we're looking for from you Currently studying for a degree in Physics, Mathematical Sciences, Engineering, Physical Sciences, Chemistry, Technology or Computing discipline. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given. MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-CB1 TPBN1_UKTJ

Stevenage As part of our Systems Design Emerging Portfolio and Capability function you will deliver systems engineering expertise to projects focussing on the front end of the product life cycle, designing the latest Complex Weapons capabilities for the UK and partner nation Armed Forces in response to advanced threats in all domains (Air, Land, Sea). Salary : up to £60,000 (depending on experience) Location : Bristol, Stevenage or Bolton (Relocation could be available) Dynamic (hybrid) working : Typically 3 to 4 days per week on site working, due to workload classification Security Clearance : British Citizen or a Dual UK national with British citizenship! Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus : Up to £2,500 (based on company performance and will vary year to year) Pension : maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities : Fantastic site facilities including subsidised meals, free car parking and much more... Training and Development : Excellent career progression, training and career development opportunities Possible Relocation available The opportunity: Whether embedded in a multi-disciplinary team, or leading an individual work package, you will gain broad engineering experience, engaging partners, co-ordinating technology specialists, and developing advanced systems engineering techniques. Through our people management opportunities you can learn to lead teams, and play a part in developing the engineers of the future. What we're looking for from you: Systems engineering experience in any of the following skill areas: Requirements and Use Case analysis Concept assessment and design trade studies System architecture design and functional modelling Performance assessment and systems behaviour analysis Verification, Validation and Certification Model based engineering techniques, including MBSE Broader engineering management experience is welcome, particularly gained through leadership of work packages, integration of complex activities or, managing technical relationships with customers or suppliers. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1 TPBN1_UKTJ

Stevenage The Launch Management System Design Authority is responsible for ensuring the technical development of, certification sign-off and in-service support for the Launch Management System (LMS) on two major programmes, Sea Ceptor and Land Ceptor. Salary : £49,000 - £65,000 depending on experience Dynamic (hybrid) working : 3-4 days per week on-site due to workload classification Security Clearance : British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus : Up to £2,500 (based on company performance and will vary year to year) Pension : maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities : Fantastic site facilities including subsidised meals, free car parking and much more... The Opportunity The Launch Management System (LMS) is a critical component in ensuring the safe and secure launch of missiles from our Weapon Systems. The LMS Design Authority is responsible for ensuring the technical development of, certification sign-off and in-service support for the Launch Management System (LMS) on two major programmes, Sea Ceptor and Land Ceptor. By building on and maintaining a complex structure of functional and physical design, you will ensure every aspect of the product can be verified, validated and accepted into the Weapon System capability by our Customers. In this role, you will be expected to have a high level of engagement across a variety of technical aspects, including system design, software engineering, electronics and mechanical engineering, in-service reliability and support, safety, cybersecurity and other disciplines. In addition, you will need to ensure the hardware and software design continues to evolve in order to meet the demand of the overall system capability expected by our customers. The LMS Design Authority will be supported in their career development goals and will ensure expertise are maintained within the team to promote the design goals required of the team and wider MBDA organisation. What we're looking for from you: If you have experience or are interested in developing your skills in the following areas, this role may be for you: Design leadership for a complex electronics subsystem Manage technical risks and opportunities in line with product development requirements Developing strong relationships with Product Design stakeholders Mastering Systems engineering principles, processes and practices Requirements engineering at System, Subsystem or Component level to enable evolution of the product design and system certification Broad knowledge associated with the design and build of hardware and software for computer based electronics equipment Ability to validate test procedures required to verify products and gather evidence to enable certification. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1 TPBN1_UKTJ

Stevenage Do you have EMC knowledge, leadership experience and are looking for the next step in your career? If so, keep reading! Salary: Circa £70,000 depending on experience Hybrid working pattern : This role offers the opportunity for a balance of on-site and remote working Security Clearance : British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 27% of base salary Car Allowance: £300 monthly cash allowance Pension : maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave - enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities : Fantastic site facilities including subsidised meals, free car parking and much more... The opportunity: An opportunity has arisen within the Environmental Engineering & Facilities (EE&F) UK Function for the right candidate to lead our Electromagnetic Compatibility (EMC) & Radiation Effects (RE) Department. The team consists of approximately 30 engineers (including 5 direct reports) in Bristol. EE&F is integral within all MBDA land, sea and air based weapon system Projects and operates at all stages of the product lifecycle. Within this role you will be responsible for the delivery of EMC and RE task packages through the provision of technical management and leadership as well as management of our EMC test facilities. What we're looking for from you: People management and leadership skills with a demonstrated ability to motivate a team Understanding of EMC requirements, environments and associated testing, equipment and facilities Experience of the application of EMC and military standards within the Defence Sector Understanding of the key activities across the Product Life-Cycle Experience of financial budgets and defining work packages Project Management skills and experience Excellent verbal and written communication Strong analytical and problem solving skills Excellent influencing and interpersonal skills The role: To lead the UK EMC & RE Department, applying specialist technical knowledge and advice to projects and sub-contractors, with overall responsibility for Department deliverables Enable technical experts and team leads to ensure that the proving logic, plans and delivery is consistent with the Project needs Provide clear and positive leadership that delivers the Functional vision, to maintain high performance and job satisfaction Conduct day to day Functional management of the EMC & RE Department Ensure that all EMC & RE activities have project management plans and establish effective communication with key stakeholders Ensure that the objectives, resource requirements, budgets and timescales are met in accordance with the agreed statements of work Support improvement activities, including development of the people, skills and capabilities in the Department Some of the key challenges for the role include: Working across Functional and international boundaries to resolve complex technical and people management challenges Maintaining competency level of staff and achieving skills profile Developing EMC & RE strategies to keep pace with emerging technologies Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability, People Management Community and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. Please Note : MBDA UK requires all employees to achieve appropriate clearances. #LI-CT1 TPBN1_UKTJ

Systems Engineer - Summer Placement 2026 Salary : £23, 495 (pro rata) Dynamic (Hybrid) Working: Where possible, we will seek to accommodate a blended approach to on-site and remote working. To ensure you get the most from this placement you would be expected to be on site at least 3 days per week. Security clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. CLOSING DATE FOR THIS ROLE IS MIDNIGHT ON 5TH JANUARY 2026 (SUBJECT TO APPLICATION VOLUMES) What we can offer you 10 week placement : starting June 2026, that allows you to apply your university learning to real-world projects and technologies Pension : maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Annual Leave : 5 days Facilities : Fantastic site facilities including subsidised meals, free car parking and much more... The opportunity Working within one of our Systems Design functions, you will be involved in concepting, designing, delivering and supporting the latest Complex Weapons capabilities for the UK and partner nation Armed Forces in response to advanced threats in all domains (Air, Land, Sea). You'll complete a placement based on a project that could be at any stage in a range of areas, from future capabilities to in-service products. Through the placement, we'll help you understand the make-up of a missile or a weapon system; from the warhead to the seeker in the missile to the wider weapon system components. These placements will enable you to understand the Systems Engineering 'V' model across the whole product lifecycle - including: Researching future technologies and novel domains; Developing requirements and functional architectures ; Creating concept solutions Analysing performance and supporting trade-off studies; Managing interfaces and integration of systems and sub-systems Proving and certification activities at Weapon and Missile system level Learning about technologies and customer needs associated with specific products or capabilities. Across the Systems Engineering domain, we offer exposure to a wide variety of different technologies, engineering methodologies, and customer needs associated with specific products or capabilities. This also offers a great opportunity to engage with internal and external customers. This role is suited to those that enjoy the creativity and practicality of working with problems to arrive at logical solutions. Our Systems Design function will support you to become a fully integrated member of the team with the opportunity to assume an increasing level of responsibility. We offer varied roles with scope to choose placements based on interests and skills. Our people are adaptable and the role is varied and fast paced - Innovation is a company value that we practice the most. Systems Engineers work with people across all engineering fields and business teams, meeting suppliers and customers and engaging with international MBDA colleagues. There is also Opportunity to travel both within the UK and potentially internationally. What we're looking for from you Currently studying for a degree in Physics, Mathematical Sciences, Engineering, Physical Sciences, Chemistry, Technology or Computing discipline. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given. MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-CB1 TPBN1_UKTJ

Our respected client, a trusted partner to the UKs Ministry of Defence, is seeking skilled engineers to join the Test Equipment Hardware Design Capability group. This team operates within the Test Equipment Centre of Excellence (TE CofEx), part of the Electronic Engineering (EE) Directorate. The EE Directorate sits within the broader Operations Directorate, forming a key pillar of Greater Engineering, which encompasses Engineering, Operations, and Programmes. Key Responsibilities: Prepare specifications and develop designs to meet quality and technical standards Investigate technical issues and propose effective solutions Conduct design appraisals to ensure compliance with standards Define test strategies and suggest improvements to diagnostic processes Collaborate on planning, risk, and quality with the Engineering Project Manager Produce documentation to support in-service product use Contribute to bid preparation and identify business opportunities Manage budgets and lead, develop, and motivate team members Report progress against work programmes and make engineering decisions Optimise team size and support junior staff while staying current in technical areas What do you need?: Interpret and understand technical requirements and drawings to develop automated test facilities and procedures that support production operations. Possess contemporary working knowledge of electronics. Have a solid understanding of modern test techniques and methodologies, including ICT, Functional Test, and Boundary Scan. Demonstrate experience in designing measurement systems, including the applicability of instruments, power distribution, and grounding. Exhibit strong analytical and problem-solving skills. Have significant experience in creating Automated Test Equipment. Preferably have experience using NI LabVIEW and/or TestStand. Preferably have experience in Boundary Scan and XJtag. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance : British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This role is based at our client's headquarters in Stevenage, a key location for missile operations. The site offers excellent transportation links, an onsite gym, and a coffee shop. Training and development opportunities are available to all employees. TPBN1_UKTJ

Our client, a reputable partner of the UK's Ministry of Defence, is seeking an experienced Shipping Officer. The ideal candidate will possess expertise in both domestic and international shipping, with a strong understanding of road and air transportation. Responsibilities will include preparing export documentation, and having a thorough knowledge of incoterms, tariffs, and CPC codes. The Shipping Officer will work closely with the client's in-house export control team, customs department, and freight forwarders to ensure seamless operations. As a shipping officer, you'll oversee all exports from the site to meet customer demands worldwide by air or road. Adhere to their processes for a benchmark service. Key Responsibilities: Ensure timely delivery of products in alignment with project requirements. Create, complete, and manage documentation necessary for export deliveries, including transport documents, hazardous goods notes, and customs formalities. Maintain up-to-date Import, Export, and Transport Registers. Coordinate with both UK and international transport providers. Handle imports and report Intrastat data as required. Promote functional excellence within the team. Assist the Export Control Department in ensuring compliance with export licenses. Stay current with all transport legislation, including regulations on prohibited weapons. Identify and implement process improvements to enhance efficiency and cost-effectiveness. Maintain comprehensive knowledge of all site movements on a daily basis. What were looking for: Proven ability to work under pressure, effectively collaborating with team leaders and stakeholders to drive productivity and meet business goals. Experienced in SAP , with practical knowledge of system navigation, data handling, and process integration. Advanced proficiency in Microsoft Excel and strong command of Microsoft Office applications to support data analysis and reporting. Solid background in Engineering and Manufacturing environments, contributing to operational efficiency and process improvement. Comprehensive understanding of export legislation and customs procedures, ensuring compliance in international trade operations. Skilled communicator with the ability to adapt style to suit diverse audiences, ensuring clarity and service excellence across functions. Strong interpersonal skills and experience working across multiple business areas to foster collaboration and alignment. Demonstrates integrity and resilience by consistently adhering to established processes, even when faced with competing demands. Excellent written and verbal communication skills, with a sharp attention to detail and accuracy. Highly organised, self-motivated, and capable of prioritising tasks to meet deadlines independently, with proven time management skills. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance : British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This role is based at our client's headquarters in Stevenage, a key location for missile operations. The site offers excellent transportation links, an onsite gym, and a coffee shop. Training and development opportunities are available to all employees. TPBN1_UKTJ

Our client, a trusted collaborator with the UK Ministry of Defence, is seeking a skilled and committed Manufacturing Controller Stores to support operations at their advanced facility in Henlow. This pivotal role involves managing the loading, control, and monitoring of work packages within a high-tech manufacturing environment. The ideal candidate will have proven experience in stores management , production lineside operations , or manufacturing control , with a strong emphasis on operational efficiency , attention to detail , and Health & Safety compliance . A valid forklift licence is essential for this position. Key Responsibilities: Apply manufacturing control processes and demonstrate proficiency with ERP systems such as SAP. Manage inventory operations, including issuing, receiving, and maintaining stock within a structured stores environment. Oversee stock control and storekeeping, ensuring compliance and monitoring of critical shelf-life items. Load manufacturing cells with scheduled jobs, aligning with lead times, cycle times, and delivery targets. Support packing operations using hand tools and manage tooling for issue and return. Execute kitting activities by assembling and preparing components for efficient production. Safely load and unload goods vehicles, ensuring accurate documentation and smooth material flow. What do you need?: Proven experience in manufacturing control and stores operations within a steady-paced production environment. Flexible and reliable, with the ability to follow detailed instructions and adapt to varying shift patterns. Strong attention to detail and capable of working independently with minimal supervision. Trained in manual handling and Electrostatic Discharge (ESD) procedures to ensure safe and compliant material handling. Certified in lifting and slinging operations, including the use of overhead cranes for safe movement of heavy components. Desirable skills: Demonstrated experience in line-side stores and manufacturing control environments (note: general warehousing experience not applicable). Proficient in PC-based tasks, including strong working knowledge of Microsoft Excel for inventory tracking and reporting. Holds a valid Forklift Truck (FLT) licence and up-to-date medical clearance for operating material handling equipment. Familiar with lean manufacturing principles, including Kanban and two-bin systems for efficient stock replenishment. Experienced in using Enterprise Resource Planning (ERP) systems such as SAP for inventory management and production support. Security Clearance : British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This role is based near our client's headquarters in Stevenage, a key site for missile operations with excellent transportation links. Employees receive comprehensive training and development opportunities. TPBN1_UKTJ

Our client, a trusted partner of the UK Ministry of Defence, is seeking a highly experienced Senior Engineering Project Manager (SEPM) to oversee the timely, cost-effective, and high-quality completion of their most critical and complex projects. This is an excellent opportunity for a seasoned professional to make a significant impact. Key Responsibilities: As a Senior Engineering Project Manager (SEPM), you oversee the creation of complex electronic sub-systems from design to delivery. Ensure projects are completed on time, within budget, and to the highest standard. Make a significant impact on our delivery approach as a crucial project management team member. What do you need: Expertise in Project Management best practices: Risk Management Stakeholder Management Compliance Management Configuration Management Earned Value Management Successful delivery of significant projects/programmes on time and within budget Experience in managing projects across various phases, from conception to customer delivery Strong communication skills and ability to influence others Organised with great attention to detail and a sense of pride in delivering quality work Candidate must have extensive experience in Electronics Development, demonstrated in their CV, in designing and delivering complex electronic sub-systems from concept to production. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance : British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This role is based at our client's headquarters in Stevenage, a key location for missile operations. The site offers excellent transportation links, an onsite gym, and a coffee shop. Training and development opportunities are available to all employees. TPBN1_UKTJ

As a Systems Performance Engineer, within one of our systems engineering teams, you will provide performance prediction and analysis expertise to major defence programmes, developing the latest Complex Weapons capabilities for the UK Armed Forces in response to advanced threats in all domains (Air, Land, Sea). Expect assignments across concept, assessment or demonstration phase contracts, covering one of the MBDA product lines. System Performance is an essential part of the system design process and a key indicator as to whether the design is suitable. Salary : Circa £43,000 depending on experience Dynamic (hybrid) working : 5 days per week on-site due to workload classification Security Clearance : British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS) and UK Security Check (SC) clearance, which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus : Up to £2,500 (based on company performance and will vary year to year) Pension : maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities : Fantastic site facilities including subsidised meals, free car parking and much more... The opportunity: The role of a System Performance Engineer is to carry out technical studies to assess performance. Missile performance studies use models of the system to estimate key performance indicators such as range and terminal accuracy, among others The System Performance Engineer will: Plan and conduct technical studies into missile performance, using complex mathematical models, to help the project understand key system design choices Develop a good understanding of how the wider system affects performance and the knock on impacts of changes to the design Work with SMEs in Aerodynamics, Propulsion, Lethality, Guidance, Control & Navigation, Seekers (and others) to understand how each of these contribute to system performance Report performance data in a clear and concise way in internal design reviews and external performance statements to customers Use your expertise to help to develop training material for new engineers What we are looking for: Excellent analytical skills Experience in running and analysing complex computer simulations (e.g. 6 Degrees of Freedom models) Competent with MATLAB If you have enthusiasm for any of the following, please apply: Use of mathematical models to assess system behaviour Data analysis using MATLAB and Simulink (or similar) Capturing and presenting technical data in a clear and concise for expert and non-expert audiences Exposure to the physical principles of aerodynamics, propulsion, guidance and control Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. TPBN1_UKTJ

Our client, a valued partner of the UK Ministry of Defence, is looking for an experienced Senior Configuration Engineer. In this role, you will support a dynamic team of over 30 Configuration specialists, working across various products, packages, and life cycles in a multi-national environment. Key Responsibilities: The Senior Configuration Engineer is a key player in supporting the Configuration Manager across various projects. This role involves taking charge of Product Definition and Configuration Management for minor projects or significant components of larger projects. It requires a proactive approach and a strong commitment to order and quality, ensuring the integrity of all design elements for the products. What do you need?: Demonstrates excellent team spirit and the ability to work collaboratively, adding value through contributions. Possesses a high level of knowledge in Configuration Management principles and their application within a demanding yet professional engineering environment. Maintains a strong concern for order and quality. Exhibits excellent communication skills across all levels, including verbal, written, and electronic. Builds rapport with stakeholders and positively promotes the Configuration Management group through a supportive and proactive approach with internal customers. Proactive, flexible, and enthusiastic. Capable of planning and delivering own workload efficiently. Aware of relevant internal and external customer requirements and standards. Highly proficient in IT literacy. Additional skills: Integrate engineering input into the design definition and structure using the company PLM tool, Windchill. Manage accurate design definitions for multiple product variants and implement engineering changes effectively. Review engineering changes to ensure adherence to business processes and project controls, approving or rejecting changes as necessary. Provide draft updates to Configuration Management documents ahead of review periods. Prepare comprehensively and timely for Configuration Meetings, supplying data to the Configuration Manager and project team as per agreed timelines. Ensure control of project design definitions throughout development, production, and in-service phases, providing comprehensive status accounting information to customers. Establish strong working relationships with key stakeholders and act as the focal point for day-to-day activities with project and engineering teams. Offer support and guidance on Engineering Change methodologies relevant to the product or equipment lifecycle, ensuring processes are agreed upon, documented, and practiced. Security Clearance : British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This role is based at our client's headquarters in Stevenage, a key location for missile operations. The site offers excellent transportation links, an onsite gym, and a coffee shop. Training and development opportunities are available to all employees. TPBN1_UKTJ

Guidant Global is proud to partner with a prestigious Ministry of Defence organisation in the UK. Our client is seeking an experienced Development and Production Test Engineer with a strong background in Electronic/Electrical engineering. In this crucial role, you will support the testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. Your expertise will be essential in providing technical support to the manufacturing test capability, ensuring that programme targets are met in terms of time, cost, and quality. Key Responsibilities: You will collaborate with a small team of dedicated engineers in a dynamic, yet friendly and inclusive manufacturing environment, where you will be responsible for the following tasks: Provide test engineering support to operators on the shop floor, including the introduction of new test equipment. Test and diagnose complex electrical/electronic systems, sub-assemblies, and circuit cards down to the component level. Generate test specifications, operator instructions, and technical reports based on higher-level requirements and information. Promptly identify remedial and corrective actions to ensure manufacturing continues in line with the programme following production test failures. Support meetings with Quality and Operations to provide status updates on test engineering actions and investigations. What do you need?: Essential: Minimum HNC level of Engineering qualifications or equivalent. Good understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to electronic component level. Awareness of electrical/electronic sub-system and system design, integration and test principles. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports. Ability to plan and organise one's work according to assigned priorities. Proficient in using core electronic test equipment, including digital multimeters (DMMs), oscilloscopes, power supplies, counter timers, signal/function generators, and current clamps for diagnostic and assembly tasks. Ability to perform accurate measurements, troubleshooting, and validation using standard instrumentation in a manufacturing or assembly environment. Desirable: Experience with advanced RF and microwave test equipment such as vector network analysers (VNAs), spectrum analysers, waveguides, and RF power sensors , providing additional capability in high-frequency component testing. Advantageous : Knowledge of RF and Microwave technology at the subsystem level. Experience in operating manual and automated test equipment in an Electronics Manufacturing environment. CADMID product lifecycle for test equipment is desirable. Environmental testing would also be an advantage. High Voltage training/awareness. SAP Beneficial MS Office skills What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance : British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This role is based at our client's headquarters in Stevenage, a key location for missile operations. The site offers excellent transportation links, an onsite gym, and a coffee shop. Training and development opportunities are available to all employees. TPBN1_UKTJ