Trabajos systems manager en BridgwaterCrear alertas

We're looking for a Project Manager to join our Natural Resources, Nuclear and Networks team based in Bridgwater. \n The post is established in support of the KierBAM Joint Venture, managing the works for Envelope, Fit Out and MEP works in AB2. These works are critical to achieve for the power plant as the commissioning of these structures is linked to the plant flue delivery and final site commissioning. \n Location: Hinkley Point C, Bridgwater, Somerset - some remote working available, with regular travel to the office required \n Hours: 45 hours per week – flexible start and finish times \n We are unable to offer certificates of sponsorship to any candidates in this role. \n \n Responsibilities \n As a Project Manager, you'll be working within the KierBAM JV Nuclear team, supporting them in the management of the task order for Envelope, Fit Out and MEP for the Ancillary Buildings Phase 2 (AB2) for Hinkley Point C. . \n Your day to day will include: \n\n • Lead the safe and successful delivery of cladding, roofing, fit-out, and MEP packages, ensuring quality, programme, cost, and safety targets are met in line with Kier and Joint Venture standards\n, • Manage the delivery programme and coordinate internal and subcontractor activities, identifying risks early and implementing mitigation strategies to maintain key milestones\n, • Oversee commercial performance by monitoring budgets, managing change, and ensuring contract compliance with variations and compensation events\n, • Ensure quality and safety standards are upheld through effective team leadership, implementation of SHE systems, and continuous improvement initiatives\n, • Act as the main client interface, managing stakeholder communication, reporting on project metrics, and promoting an inclusive, supportive team culture\n\n \n What are we looking for? \n This role of Project Manager is great for you if: \n\n • Proven leadership in delivering large, complex construction and building envelope projects safely, on time, and within budget, with direct accountability for programme, cost, and quality\n, • Strong understanding of NEC3/NEC4 contracts and commercial processes, including change control, early warnings, and cost forecasting in collaboration with commercial teams\n, • Skilled in managing multidisciplinary teams and stakeholder interfaces across design, delivery, and commissioning, with a focus on collaboration, communication, and safety excellence\n, • Deep technical knowledge of cladding, roofing, fit-out, and MEP disciplines, driving innovation, continuous improvement, and quality through all project phases\n, • Qualifications\n\n, • SMSTS and CSCS (Managerial)\n, • NEC3/NEC4 training or practical experience\n, • IOSH/NEBOSH or equivalent safety qualification\n \n Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. \n \n Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. \n As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. \n \n Due to the nature of this role and the nature of the work at this site, you will be required to complete a Government Security BPSS, which takes place before your employment, and is conducted by the Cabinet Office's United Kingdom Security Vetting (UKSV) agency who set out a pre-requisite criteria including residency history. (Applicants with convictions will be treated on a case-by-case basis. We do not discriminate based on an applicant's conviction history or the details of any convictions disclosed to us - to read more about our programme to support people with convictions into employment, visit jobs.kier.co.uk/prison-programme/). This role will also be subject to further pre-employment checks. \n \n We look forward to seeing your application to #joinkier

Why join us? In the 155 years since our foundation, Sir Robert McAlpine has worked on some of the country's most iconic buildings and projects. Our success through the decades has been down to our people - we're a family-owned business with a culture that brings out the best in individuals and teams. Right now, we're excited about continuing our legacy. This is where to achieve more from your career, by proudly building Britain's future heritage with us Project Controls Reporting Manager We are seeking a highly skilled Project Controls Reporting Manager to lead the reporting function on a large-scale construction project. This role is pivotal in ensuring timely, accurate, and insightful reporting across cost, schedule, risk, and performance metrics to support strategic decision-making and project delivery. Key Responsibilities • Develop and maintain integrated project controls reporting systems and dashboards., • Lead the preparation of weekly, monthly, and ad hoc reports for senior stakeholders, including clients, contractors, and internal leadership., • Consolidate data from planning, cost control, risk management, and change control teams into coherent, actionable insights., • Ensure alignment of reporting formats and KPIs with contractual and organizational requirements., • Manage the reporting calendar and ensure timely delivery of all project controls outputs., • Support project reviews, audits, and governance forums with high-quality reporting packs., • Drive continuous improvement in reporting processes, automation, and visualization tools (e.g., Power BI, Tableau)., • Bachelor's degree in Engineering, Construction Management, Project Controls, or related field., • 8+ years of experience in project controls, with a strong focus on reporting within large infrastructure or construction projects., • Proficiency in project controls software (e.g., Primavera P6, Aconex, EcoSys, MS Project)., • Advanced skills in Excel, Power BI, and other data visualization tools., • Strong understanding of project lifecycle, cost management, scheduling, and risk principles., • Excellent communication and stakeholder management skills. We're ready to invest in you and your future, and offer wide-ranging, performance-related progression opportunities. Our competitive rewards packages feature flexible benefits to fit your lifestyle and priorities. We'd love you to join us in proudly building Britain's future heritage. Apply online now. Sir Robert McAlpine is focused on being a truly inclusive employer, even if you don't meet every single requirement, we'd still love to hear from you. Especially if you're part of a group that is under-represented in Construction. Our goal is for Sir Robert McAlpine to proportionally represent the diversity of the working population in society. As a family-run business with strong family values, our aim is to ensure that Sir Robert McAlpine is a supportive, empowering and inclusive environment for every member of our team.

Technical Sales Engineer Fall Protection Systems Job Title: Technical Sales Engineer Fall Protection Systems Job reference Number: 381948-2545-25210 Industry Sector: Technical Sales, Sales Engineer, Sales Executive, Solution Sales, Area Sales Manager, Business Development Manager, Fall Protectio

Job Purpose The Materials Analyst is responsible for supporting the Department Manager in understanding the business needs for spare parts and managing risks to ensure timely and cost-effective delivery of those spare parts. The role encompasses all teams within the department, specifically supporting the operational warehouses at Hinkley Point C (HPC). As a Materials Analyst, you will collaborate closely with various departments across the HPC project, including Pre-Operations, Commissioning, and Installation, to ensure timely availability of spares for interim maintenance activities and the operational station. This role provides a unique opportunity to develop a comprehensive understanding of a pressurised water reactor, gaining experience from the UK fleet and other Nuclear New Build projects while working within Pre-Operations for the Asset Management programme. Additionally, there will be opportunities to provide technical oversight during the construction and commissioning phases, further developing knowledge of Nuclear and Conventional systems in preparation for assuming technical responsibility for designated systems. The specific focus of this role will depend on business needs, previous experience, and career aspirations. This is an excellent opportunity to shape your own future and ongoing development while meeting business needs and preparing for future roles within the operating organisation. Principal Accountabilities The Materials Analyst will report to the Procurement Lead and be responsible for: Collaborating with Procurement to achieve company targets. Improving, executing, and analysing trends, and communicating results to management. Participating in business meetings with team leaders and managers to assess and identify issues with current operations, and implementing improvements to streamline processes. Developing actionable roadmaps to improve processes and workflows to support station needs. Serving as a liaison between staff and management by analysing and interpreting data to support station needs. Preparing, analysing, and summarising operational results for use by various key stakeholders, and creating reports. Conducting full lifecycle of analytics projects (including pulling, manipulating, and exporting data) according to project requirements. Evaluating Key Performance Indicators and providing ongoing reports. Knowledge, Skills, Qualifications & Experience Strong attention to detail and target-driven mindset. Proficiency with analytical tools. Strong influencing and team-building skills, with the ability to build consensus and engage key stakeholders at all levels. Ability to excel in a fast-paced environment and collaborate with team members to ensure efficient operations. Proficiency in Office 365 tools such as Excel and Word. Understanding of inventory and processes. Experience in a project environment is preferred, but not essential. Comfortable following established processes with a healthy questioning attitude. Minimum education requirement of GCSE or National Qualifications standards. Driver's licence. Behavioural Competences A proactive, analytical thinker with the ability to work with minimal supervision and on their initiative. Excellent communication and interpersonal skills. Excellent organisational and IT skills. Ability to prioritise workloads, meet deadlines, and extract and consolidate key information within a project environment. Skilled at building relationships with all levels within an organisation. TPBN1_UKTJ

Senior Quantity Surveyor £70,000 - £90,000 + Benefits Somerset Full-Time / Permanent As a Senior Quantity Surveyor, youll be at the heart of delivering great results, boosting commercial success, and making sure projects hit top standards for quality and compliance. Its a chance to join a high-profile scheme with a team that values fresh ideas, teamwork, and career growth. If youre looking to be part of a flagship UK infrastructure project in a culture that champions health, safety, wellbeing, and collaboration, this is it. Get hands-on experience with complex, high-value civil engineering projects and enjoy clear career progression. WHAT YOU WILL BE DOING Commercial Leadership Own the full commercial cycle - from procurement strategies through to final account settlements Prepare and present cost reports and CVRs directly to clients and senior stakeholders Lead change management processes, identifying risks and value engineering opportunities early Drive subcontractor and supply chain commercial negotiations with autonomy Technical Delivery Manage monthly valuations and applications for payment with full supporting documentation Maintain contract administration, including change registers, programmes, and forecasting Oversee subcontractor accounts from requisition through to final account agreement Deliver accurate cashflow forecasting and commercial reporting to support project and business decisions Strategic Input Work alongside the Commercial Manager on tender submissions and pricing strategies Contribute to pre-construction planning and buildability reviews Mentor and develop junior QS team members as projects scale WHAT WE NEED FROM YOU NEC Option 1 experience, you've lived and breathed these contracts, not just read about them Minimum 2 years at Senior level on projects £5m+ Demonstrable experience across the full commercial toolkit: change management, programmes, measurement, CVRs, forecasts, cashflows Sharp commercial awareness with knowledge of standard forms of contract (JCT, NEC) and methods of measurement Strong negotiation skills and the confidence to have tough conversations when needed Proficient with Microsoft Office and comfortable with costing systems Highly Desirable: MRICS or working towards chartership Infrastructure, highways, or civil engineering sector background Experience in mentoring or line managing junior commercial staff SALARY AND BENEFITS £70,000 - £90,000 (D.O.E) 31 days annual leave Generous Pension Life insurance 4X salary Reference Number: ST1 To be considered for this position or other opportunities, contact Tash Johnson at Equal Resourcing Ltd or click "Apply Now." Equal Resourcing Ltd is serving as a recruitment agency for this job opening. Your application implies your consent for us to process your data and communicate with you concerning this application and associated services, in compliance with GDPR regulations. Our client can only consider applications from candidates with a valid legal right to work in the United Kingdom. To view a list of job openings, please visit the Equal Resourcing Ltd website. It's important to note that not all recruitment positions may be listed, so for the most current opportunities, contacting us directly is recommended. TPBN1_UKTJ

Mller UK & Irelandis wholly owned by Unternehmensgruppe Theo Mller which employs over 31,000 people throughout Europe. In the UK, Mller develops, manufactures and markets a wide range of branded and private label dairy products made with milk from 1,300 farmers in Britain.Mller is ranked within the top 20 in The Grocer's Top 100 list of Britain's Biggest Brands and is picked from shelves millions of times each year. Mller UK & Ireland includes: Mller Milk & Ingredients which aims to be Britain's private label dairy leader and produces branded and private label fresh milk, cream, butter and ingredients products. It boasts a network of dairies and depots servicing customers throughout the country. Mller Yogurt & Dessertswhich is the UK's leading yogurt manufacturer which aims to create millions more Mller moments for its consumers. It is responsible for major brands like Mller Corner, Mllerlight, Mller Bliss, Mller Rice, FRijj and Mller Kefir Smoothie and produces chilled desserts under licence from Mondelez International. It also supplies the UK private label yogurt market from a dedicated, state of the art yogurt facility. Site Technical Manager - Bridgwater Location: Bridgwater Dairy Hours: Monday to Friday, 40 hours per week Contract Type: Full-time, Permanent We are seeking a dynamic and experienced Site Technical Manager to lead the Quality function at our Bridgwater site. This is a pivotal role focused on driving product quality, ensuring technical compliance with customer and legal standards, and fostering a culture of continuous improvement. Key Responsibilities: Lead the governance and assurance of site quality systems. Develop and deliver strategic quality plans aligned with group objectives. Empower and enable the team to deliver high performance through coaching, development, and succession planning. Drive continuous improvement initiatives across the site. Make risk-based decisions on product quality with a commercial mindset. Ensure full implementation and governance of the end-to-end Quality Management System (QMS). Lead crisis management and high-level problem-solving activities. Qualifications & Experience: HACCP Level 4 and Food Safety Level 4 certified. Lead Auditor qualification. Strong background in Dairy Science and Microbiology. Proven leadership experience in a technical or quality role within food manufacturing. Familiarity with retailer standards and regulatory requirements. What We're Looking For: A collaborative leader who builds trust and communicates with impact. Someone who thrives on change and innovation, and inspires others to do the same. A strategic thinker with the ability to translate vision into action. A champion of continuous improvement and operational excellence. Why join Muller Milk and Ingredients? A Competitive salary & Benefits Package Enrolment into our company bonus scheme Company Car or Car Allowance Private Medical Cover 25 days annual leave + Bank Holidays Pension scheme - contribution matched up to 8% Access to the Mller Rewards discount scheme offering over 800 discounts online and in-store and the potential to make savings across grocery and clothes shopping, holidays, insurance, gifts and more Free onsite secured colleague car parking Career progression opportunities #pinksquid Contact Details: F.A.O. UK Recruitment, Mller UK & Ireland, Shrewsbury Road, Market Drayton, Shropshire, TF9 3SQ TPBN1_UKTJ

Role: Mechanical Field Engineer - Hinkley Point C Position: Contract Location: Hinkley Point C - Bridgwater, Somerset - HPC Site Monday to Friday 7am to 4:30pm with weekend work available Duration: Ongoing Day Rate: £390 p/d PAYE + 36 days leave / £530 p/d Umbrella Type: Full-time Hinkley Point C is one of the largest and most complex infrastructure projects in Europe - a next-generation nuclear power station that will provide low-carbon electricity for around six million homes. We're seeking a mechanically biased Field Engineer to join this historic project - a professional who thrives in a regulated, high-performance environment and is passionate about technical excellence, compliance, and quality assurance. This is an exceptional opportunity to contribute to a megaproject that will define the UK's energy landscape for decades to come, working alongside some of the best engineers and contractors in the industry. About the Role As a Mechanical Field Engineer , you'll play a key role in ensuring construction and installation activities are completed safely, efficiently, and in full compliance with engineering specifications and procedures. This is a non-manual, hands-off position focused on observation, verification, and reporting - ideal for candidates who want to develop their expertise within nuclear new build while gaining exposure to world-class engineering standards and processes. Your responsibilities will include: Conducting field surveillance on mechanical installations, including pipework, pumps, valves, tanks, heat exchangers, turbines, and HVAC systems . Verifying adherence to specifications and approved processes across a wide range of mechanical systems. Performing alignment checks, torque control, and joint integrity inspections . Supporting QA/QC activities , punchlist reviews, and documentation management. Completing reports and distributing findings to Construction and Quality teams . Participating in meetings with contractors, confidently communicating technical findings, and challenging when required. Conducting documentation checks against project specifications (BTS, BST, ISO9001, GQAS). Maintaining accurate and traceable records of all site surveillance activities. Ideal Candidate Profile We're looking for someone with a strong mechanical background and experience in field engineering or construction supervision within highly regulated environments such as nuclear, petrochemical, pharmaceutical, or chemical processing plants . You'll bring: A minimum of 5 years' experience in a mechanical or field engineering role. Understanding of mechanical systems installation and commissioning - including pipework, rotating equipment, pressure systems, and HVAC . Awareness of site processes such as NCRs, ITPs, QA/QC procedures , and punchlist closeout . Confident communication and interpersonal skills - able to liaise effectively across multidisciplinary teams. Proficiency with Microsoft Office, SharePoint, Teams, and Excel . A collaborative approach, able to work seamlessly within construction, quality, and surveillance teams. Formal qualifications (e.g. HND, HNC, or equivalent) are advantageous but not essential - practical experience, sound engineering judgement, and a strong safety mindset are key. Why Join Hinkley Point C? Be part of one of the UK's most important infrastructure projects , shaping the future of sustainable energy. Work within a high-performing, technically excellent engineering environment . Gain exposure to world-class construction, safety, and quality standards . Long-term, stable contract opportunities (24-36 months). Collaborative team culture with opportunities for progression and development within the Nuclear New Build programme. Application Information: If you're an experienced Construction Delivery Lead or Construction Manager with a passion for large-scale mechanical and electrical construction, we want to hear from you. Join Rullion and take your career to the next level - contributing to a project that will power Britain's future for generations. ?? Apply today or contact the Rullion Recruitment Team to discuss this opportunity in more detail. Good Luck! This vacancy is being advertised by Rullion Ltd acting as an employment business. Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base, from small start-ups to large household names. We celebrate and support diversity and are committed to ensuring equal opportunities for both employees and applicants. Thanks, Rullion. Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants. TPBN1_UKTJ

Construction Delivery Lead 1354CW Hinkley Point C, Somerset PAYE £435.50 or Umbrella £605.86 Principal Accountabilities and associated Guidance Documents • Manage and develop their Construction Delivery Managers, to ensure they have a good understanding of site activities and can carry out their role accordingly. Offer support and guidance, along with ensuring that all appropriate training for a CDM is undertaken. • Fulfils Line Management responsibilities to Construction Delivery Managers. • Oversee all aspects of Health Safety and Environment during construction activities in their allocated area (s), in accordance with the NNB HPC Construction Phase Plan . • Undertake and record safety and/or assurance inspections that support the project KPI's. The tool at HPC for this is INSIGHT • Construction Delivery Lead shares the Construction Delivery Manager's responsibilities depending on work area and scope complexity. When nominated by the SCDM, undertakes role of Construction Delivery Manager for specific areas as and when required. • Ensures that the HPC Drumbeat for the series of Daily and Weekly Meetings is understood and carried out by CDM's • Organise and conduct Weekly planning meetings called Plan of the Week (PLOW's) with the Contractor Partners, to ensure that the coordination and short term planning is in line with the overall delivery schedule and outputs are recorded and issues escalated. • Supports the CDM/Contract Partners in the running of the Plan of the Day meetings (PLOD's) • Attends all appropriate Coordination Meetings for their areas of works. CDM to support. • Attends all Weekly, monthly MDT Meetings for their area of works and contracts. CDM to support. • Leads all Weekly Construction meetings for their area of works and contracts, using and updating the Issues & Action Tracker created for all of the NI Works. CDM to support. • Oversee the contractor's management of all construction and labour force logistics and contracts relating to the works to be constructed. • Support the Tier 1 contract partners in the delivery of their scope, providing information and co-ordination to support the contractual management of the works. • Recommend temporary measures to mitigate against safety and/or quality concerns, along with program restraints. Follow up by taking appropriate and proportionate action (e.g., issue communications, call meetings) to avoid the cessation of works. This includes but is not limited to review of documents, assurance audits, etc. • Reviews the Construction Daily Site Logs (DSL), Surveillance Guideline, produced by the CDM's, to ensure information is reported to the required level of detail, up through the organisation and escalates any issues/concerns via detailed reports. Fieldview and QCFC training will be required. • If required to do so by the SCDM due to resource constraints and the "Agile" approach, monitor works on site, record findings in your DSL, using the Quality Control For Construction tool QCFC, and capturing this on the issued Tough Pad, ensuring information is reported up through the organisation to the SCDM. Photographs of working activities should be taken and placed in the DSL, along with Photographs of the Works Authorisation Form, Temporary Access Certificate, Permits and POWRA. Check all are in date and valid. • Ensures that a Surveillance Programme (example), is in place for all Contracts associated with their work areas. • Proactively communicate/co-ordinate with site functions (H&S, quality, surveillance, commercial, project controls, logistics) and other CDM's, CDL's & SCDM's, to maintain good communication links, and ensure activity is well and timely reported. This will also include regular attendance at Daily Activity Briefings (DAB's), Pre-Start Briefings, POWRA and supporting the delivery of key messages to the contractor's organisation, along with attendance at the delivery of any major Toolbox Talk or Specific Safety Brief. • Acts as Lead Reviewer (or Reviewer as SME) for documents submitted by the contract partners on Teamcenter. Calls upon NNB SMEs to gather any specialist help to review and identify necessary control measures associated with such RAMs or Documents, to ensure the work can be executed safely and compliantly. • Ensures that an appropriate Review Matrix is available for Construction related documentation and that the individual MDT's have an up-to-date version to assist them with the correct individuals to carry out document surveillance. • Assists CDM's & Tier 1 Partners in the production and validation of RAM's Addendums. Use Docusign for signatures. • Supports the CDM in Reviewing and Signing WAF's (Work Authorisation Forms) to give approval for Work Authorisation on all work areas under his control. Approves to give "go ahead" before final processing of WAF by Permit To Work (PTW) office. Monitors life cycle of WAF's in their areas and assists the PTW office on the allocation of Primary or Secondary WAF's. See Presentation. See Building & Work Platform Coordination Work Instruction. • Leads CDM's in assisting the Tier 1's in the production of Hand Over Certificates and associated Temporary Access Certificates (TAC's). An Interface Management Document (IMD) will be required as an appendices of the TAC, this consists of a brief outline of the scope and a RACI. RACI stands for "Responsible, Accountable, Consulted & Informed" and is a simple, effective means for defining project roles and responsibilities, providing a comprehensive chart of who is responsible, accountable, consulted, and informed every step of the way. Use Docusign (Apply to NNB IT Team to activate) to acquire signatures for both H/O's and TAC's. • Working with the CDM & SCDM, ensure that the Tier 1 Contractor Partners are collating Lifetime Quality Records (LTQR's), in a systematic way and in the appropriate format. This will result in an accepted End of Erection Status Report (EESR). The CDL has actions within the process that they are responsible for. • Supports the MDT PM is collating evidence for the DWP from T-12. Leads the production of evidence to complete the Delivery Work Packs (DWP's) at T-3, with the support of the CDM and SCDM. The DWP's associated with your work areas can be found on SWITCH, using the DWP procedure Rev 6 and the PowerPoint presentation. The CDL has actions within the process that they are responsible for and must be trained to use Switch. • Ensure that the Tier 1 Contractor is complying with all ITP activities in the field and that all Surveillance Opportunity Notification Information Management System (SONIMS) notifications are being booked and adhered to by them. This can be checked at the PLOD's. • Ensure that the M&E Construction Team Internal Pre-Work Check Sheet is followed prior to any work commencing and at the start of physical activities if the field. Use of this Check Sheet will assist in compliant delivery. • Advise the Senior Construction Delivery Manager of any issues that come to light that should be addressed contractually such as issuing required notices and matters relating to changes/variations. Liaise with the Senior Construction Delivery Manager to identify and jointly resolve any integration or contractor interface risks or issues. Contribute information on specific area to weekly and monthly reports, as well as issuing and maintaining performance and KPI indicators. Understand and fully implement project procedures for workface contract-charge issues. • The requirements above can be done by contributing to the "LIVE" NNB NI Civil and/or M&E Construction Daily Report (to be produced and Link Required) to ensure information is reported to the required level of detail up through the organisation and escalates any issues/concerns via detailed reports. The content of the Construction Daily Report can be taken from the CDM DSL's and other sources. • Contributes to the "Live" Works Area Contract Specific Information Sheets, ensuring on a weekly basis that they are up to date and relevant to current activities and associated documents and individuals • Ensures that all CDM's in their team are feeding into the "Live "Construction Daily Report and Works Area Contract Specific Information Sheet. • Manage Engineering Change in the field, owning RFI's, FCR's and NCR's on both the outgoing CCIS System and the new system which is to be SWITCH and UPDATE. Training on both systems will be required. Leads discussions with the Joint Design Office (JDO) and MDT PM's on resolving issues. • When instructed to by the SCDL, carry out the CDL role involved in Mobilising a Contractor Partner to site, who will be carrying out works in their allocated areas. Work closely with the MDT SPM in assisting the Tier 1 Partner collating the required prerequisites and subsequently holding the Mobilisation Readiness Review when complete. The Mobilisation Quality Plan (MobQP) should be used to initiate Tier 1 mobilisation. • To ensure the CDL is fully informed of the T1's responsibilities TPBN1_UKTJ

About the entity Framatome is a global leader in nuclear energy, recognised for delivering innovative, value-added technologies that design, build, maintain, and advance the world's nuclear fleet. With 20,000 employees in over 70 locations worldwide, we provide components, fuel, and control systems for nuclear power plants, along with a full suite of reactor services - all focused on improving safety, performance, and sustainability. Backed by EDF Group (80.5%) and Mitsubishi Heavy Industries (19.5%), we're driving the future of clean energy. Here in the UK, our team is already 400 strong - and growing. As we expand our service offerings across the UK nuclear industry, we're aiming to reach 500 dedicated professionals in 2025. Now's your chance to join a company that's shaping the energy transition - where your expertise will matter, your growth will be supported, and your work will help power generations to come. Your missions The Method Engineer is responsible of the preparation and the follow-up of all Construction Work in the scope of Framatome Limited. The role is based on site at Hinkley Point C (traveling to other sites in the UK and abroad is part of the role). The consists in coordinating the Design Package to be installed on site, liaising with the Design Office, the Site, the Client and other relevant departments of Framatome Limited. The Method Engineer has a primary role in defining the Site Activities methodology (installation and / or erection) and ensuring the required Temporary Works associated are completed and validated prior Construction Work. The Method Engineer liaises with the Design Office to ensure the development of the Design Package is suitable for installation. The Method Engineer is constantly seeking solutions to the problematics related to Site Activities, as well as capturing and compiling summaries and lessons learned about the operations conducted. You are What will you be doing? Preparation and follow-up of Site Activities: Production of documentation that is comprehensive by the relevant stakeholders, enabling the internal approval as well as acceptance by the Customer when applicable. Maintaining an auditable configuration system within the Method Engineer remit of Design and Method; enabling demonstration that the used Site documentation (Risk Assessment Method Statement, Procedures, etc.) and Temporary Work are Fit for Purpose. Liaison and Coordination with relevant stakeholders interfacing with the Methods Engineer in order to get all requirements and specificities prior Construction Work. Organise presentation and produce / check documentation prior Site Activities (Method Statement, Temporary Work, Installation procedures / instructions, Installation drawing, etc) Acting as Temporary Works Coordinator to define and specify the relevant Temporary Work, its category and following its development in support of the Site Activities; more specifically for the Temporary Work requiring design, the Method Engineer must act as a "Product Manager". Ensuring all contributing stakeholders are given the right level of input for their own production (for instance: Design Engineers producing Temporary Work Design or Site drawings; HSE Advisor supporting RAMS, etc.). Ensuring Design, HSE, Site requirements are defined, gathered, prioritised and followed: Maintaining an auditable requirements matrix, gathering all the requirements within the Methods Engineer remit. Ensuring the requirements are prioritised by challenging stakeholders. Tracking and minuting reviews and Lesson Learned as well as contributing to continual improvement within the role and its applicable processes. Involved with Design Activities to incorporate Site related requirements. Development of the Temporary Works associated to the agreed Methodology. Organising and / or participating in HSE Risk Design Reviews, Installation Method Reviews and Temporary Work Design Reviews. Master HSE requirement & CDM regulations. Ensuring the Site specifications are taken into account for Design and Site Activities Contributing in challenging requirements to ensure any "out of scope" requirements are communicated to Project Team and relevant stakeholders for claim. Working closely with all relevant stakeholders to clarify requirements that are requesting a Design Change where relevant. Documenting Lessons Learned as well as gathering relevant requirements for future Site Activities. What are we looking for? Required Engineering process knowledge and assurance Mechanical and Structural Engineering (degree) Temporary Work knowledge Ability to read and interpret Technical Drawings Writing technical and non-technical documentation Desired Personal Characteristics: Confident manner, good presentation skills Determination - not easily discouraged or put off Passion, enthusiasm and charisma. Innovative - prepare Additional information Specialization: TAA - Design , engineering management & Systems engineering Level of education (all) Bachelor Place: United Kingdom, Bridgwater, Hinkley Point C Employment level: Non cadre TPBN1_UKTJ

Commissioning Engineer 1370CW HPC Site, Somerset PAYE £219.64 or Umbrella £310.71 Are you the type of person who likes a fast-paced environment and likes to be challenged? Are you a problem-solver who is driven to find and follow solutions in a safety-focused environment? Do you have a delivery mindset, with the ability to convey complex information to others? Whether you are just starting out in your career or have a number of years under your belt, we want to hear from you! The day-to-day: The Commissioning Engineer role will evolve during the lifecycle of the project and combine technical knowledge with project delivery skills. The evolution and scope of the role provides unrivalled opportunities for career development and growth. You will contribute to detailed planning and preparation, before executing commissioning tests as part of a team and analysing results to justify the readiness of HPC units to safely enter commercial operation. You will work with a large number of stakeholders including contractors, operations, installation and project teams teams to name a few. No two days within the commissioning team are the same as our workload involves an array of technical topics whilst also providing the opportunity to gain practical hands-on experience. Supported by a wider team, team leader and Commissioning Manager, you will provide solutions to assist the team in meeting project objectives and milestones. We take pride in our training and development processes and ensure these are provided to increase your skills and knowledge and ensure you have the necessary skills and support to safely commission your scope. The team is planned to undergo rapid growth which will provide opportunities for your career development and progression within the company. Key attributes that you can demonstrate: Hands-on commissioning experience is a bonus and a degree from an engineering discipline is a must. In the absence of direct civil nuclear experience, you will have strong theoretical knowledge of engineering systems and processes you have gained from your previous employment. The following skills and experience will assist your application: Solutions-oriented, with a keen interest and focus on quality, excellent problem-solving skills, logical thinking, handover of plant systems, commissioning testing, practical hands-on site experience, safety focussed, experience in design work, site-based TPBN1_UKTJ

Mechanical Technician To undertake work activities in accordance with their training, best practice, applicable trade and Company standards.Any additional information you require for this job can be found in the below text Make sure to read thoroughly, then apply.Key responsibilities- Participate in the planning and preparation of work activities.- Safely carry out work in accordance with the relevant Safe Systems of Work using recognised best practice, applicable trade and Company standards.- Carry out Point of Work Risk Assessments and Behavioural Safety Observations.- Not to undertake work unless they are competent (and authorised) to do so and have received an appropriate pre-job brief from their Line Manager.- Comply with all Company and Customer procedures, site rules and instructions- Undertake work so that it complies with the technical and quality requirements of the Safe System of Work.- Not to proceed past a hold point until authorised to do so.- Ensure that workplaces remain clean and tidy before, during and after work tasks.- Immediately report any unplanned events, defects, damage, safety hazards or other problems to their Line Manager.- Apply good practice principles such as the Human Performance Error Reduction tools STAR, Peer Check, Questioning Attitude etc.- Engage with and adopt the principles of Company initiatives such as "People Who Do The Right Thing"- Carry out other task/duties, commensurate with the Role Holders competency, as directed by their Line Manager.This role will require the candidate to work within a radiological controlled area and will include the requirement to wear specialised PPE ( provided by CNL) and in addition at times there will be a requirement to wear RPE and as such must be clean shaven and undertake a face fit test The candidate will be involved in the installation of plant and equipment, a good knowledge of mechanical installation and minor civils works ( Drilling and fixing into concrete) will be required Hours of Work are 44 hrs per week, Monday to Thursday ( Friday /Sat /Sun working may be required on an ad hoc voluntary basis) Experience and Qualifications Academic Requirements NVQ Level 3 / SVQ Level 3, recognised apprenticeship training.or relevant proven experience Specific Requirements (all) CCNSG Safety Passport or CSCS labour card Experience Demonstrable experience covering a wide range of engineering topics including Plant installation and general mechanical construction.d02fcfcb-6df4-40ee-95cf-3eb059ce3173

Morson Technical Services are currently seeking an Aircraft HUMS Controller to be based at RNAS Yeovilton on a permanent basis.If you are considering sending an application, make sure to hit the apply button below after reading through the entire description.JOB PURPOSE, ACTIVITIES AND TASKS- The Wildcat HUMS Controller is responsible to the RNAS Yeovilton Wildcat MTP for the provision of Wildcat Vibration analysis (VA) and Wildcat Health Usage Monitoring System (HUMS) support through control of the Vibration Health Usage Centre (VHUC).Provisioning of level 2 advice to Wildcat squadrons, LWPT, 1710 NAS and Engineering Management on Wildcat HUMs aircraft health, transmission vibration monitoring, aircraft vibration and RTB diagnostic matters and associated VA equipment in accordance with MAM-P.Reporting of any potential vibration issues to engineering management highlighted through 2nd level or 3rd level data analysis IAW MAM-P and AP101C-1500-2(NA)1 SPS 004.Employing or supervising the use of specialist vibration collection and analysis techniques in accordance with CIETP Chap 18 The maintenance and control of Wildcat aircraft vibration histories IAW MAM-P Chap 5.4 and 5.5 and AP101C-1500-2(NA)1 SPS 004 for: Vibration test results Vibration and Health monitoring trends HUMs incremental feedback to level 1 users HUC specialist liaison with VA agencies, LWPT and industry for Wildcat aircraft, IAW MAMP-01, Chap 5.5 Processing and passing Wildcat annual Cockpit Voice and Flight Data Recording (CVFDR) downloads to a body nominated by Wildcat PT IAW AP101C-1500-2(NA)1 SPS 004 for analysis of correct recording and CV validity.Informing end user as to status of their aircraft and any rectification required.Notifying Engineering Management of any inconsistencies or inaccuracies in VA equipment or software, or other problems affecting the completion of the VA task.The physical security of the VCC/HUC and security and control of all publications, soft data backups, VA databases, VA data transfer devices, VA aircraft equipment, VA IT systems and associated equipment and all VA documentation held in accordance with JSP440.Control of all VCC and HUMS equipment, software standards specially including: Administration and control of Helicopter Vibration Control Ground Station (HVGS) database for Wildcat and the forwarding of any significant data (MIG).Administration and control of existing VA data transfer media and procedures in accordance with JSP 440.Control and co-ordinating the holding, maintenance and rectification of Unit VA equipment.Attend HUMs system and policy development Working Groups as the Wildcat representative.Assist 1st, 2nd, and 3rd line engineering effort by carrying out Wildcat aircraft VA tasking when VCC / HUC VA primary tasks permit.Notify relevant Engineering Management of any aircraft or equipment fault of a serious nature that might warrant a fleet check or further reporting action, or of any VA events that is likely to render Army aircraft “off-state”.Practice and promote a culture of continuous improvement.Ensuring the positive promotion of Flight Safety and Human Factors awareness.Ensuring compliance with the Equal Opportunity and Diversity legislation and HSE procedures.Platform Continuing Airworthiness.As contracted, work under the airworthiness directives issued by the Wildcat PT and the respective FLC Continuing Airworthiness Management organisation (CAMOs).The WIST Engineering HUC Controller has an additional role to support the relevant FLC CAMO function iaw their respective Continuing Airworthiness Management Expositions (CAMEs).KNOWLEDGE SKILLS AND EXPERIENCE- Qualified to at least ONC in aeronautical engineering having served an aviation engineering apprenticeship and have worked as a manager in military aviation engineering with 3rd signature authorisation level experience for at least 2 years, or (where no ONC or equivalent is held) with relevant experience to 3rd signature level authorisation, with a minimum 5 years experience.Successfully completed the necessary HUMS courses to demonstrate competency in: HUMS Awareness HUMS Admin HUMS Analysis A full HUMS understanding of: First Level- Operating Units Second Level- HUC A full understanding of all aspects of Military aircraft engineering and documentation.A full understanding of Military aircraft operation in base and field locations.Current and competent in the use of GOLDesp.If this is of interest please apply today or alternatively contact Oliver Beaumont directly on 01935 403242 ord02fcfcb-6df4-40ee-95cf-3eb059ce3173