Trabajos technical operator en BootleCrear alertas

Position: EC&I TechnicianLocation: LiverpoolSalary: Circa £40k-£45kRole OverviewThe EC&I Technician is responsible for managing projects from the control handover stage through to successful completion of Installation Qualification (IQ), Operational Qualification (OQ), and operator training at customer facilities.The role includes connecting safe and local area panels, conducting pre-testing, supporting Factory Acceptance Testing (FAT), completing electrical re-connections, and performing on-site qualification activities. The position also involves delivering operator training to ensure smooth project handovers.Global travel is required to support installation and qualification assignments, with travel periods of up to three weeks at a time.Key Responsibilities Ensure compliance with Environmental Health & Safety Policy and ISO9001 Quality Management System requirements. Build and assemble control systems. Support external suppliers in control panel builds to ensure required standards are met. Perform Pre-FATs and FATs, acting as the customer point of contact for control aspects of projects. Maintain a safe, clean, and organised working environment. Provide regular project updates to the Operations Manager, Project Manager, and Control Engineer throughout the project lifecycle. Coordinate with Control Engineers from design through to build stage. Support engineering departments with software and process updates. Issue marked-up drawings and parts lists to the assigned Control Engineer. Attend client facilities for electrical re-connection, installation, IQ/OQ activities, and equipment training, liaising with the Service Manager. Assist the service team with planned and unplanned maintenance on equipment at customer sites. Act as a role model within the team through training, coaching, and mentoring to maintain high standards of work.Required Skills & Experience Time-served apprenticeship or equivalent experience. HNC or equivalent qualification in Electrical Engineering. Previous experience in a similar role. Strong verbal and written communication skills. Analytical and problem-solving abilities. Good knowledge of electrical regulations. Proficient in reading and interpreting electrical drawings. Strong teamwork and collaboration skills. Ability to work under pressure. Excellent customer service skills. Strong organisational skills.Location & Travel Primary base: Factory in Liverpool. Global travel required to support commissioning and service activities.Working HoursFactory-Based (37.5 hours per week): Monday - Wednesday: 07:30 - 17:30 Thursday: 07:30 - 17:00Off-Site Working (37.5 hours per week): Monday - Thursday: Same as factory hours, aligned with client requirements Overtime available Friday, Saturday, SundayOvertime Rates: Friday & Saturday: x1.5 Sunday & Bank Holidays: x2Compensation & Benefits Salary: £40k-£45k (dependent on experience) Off-site allowance Overtime payments Pension: 4% employer / 4% employee 26.5 days holiday (including bank holidays)Additional Benefits: RAC cover Death in Service (4x salary) Income Protection (long-term sickness) Employee Assistance Programme (EAP) Retailer discounts Access to Health & Wellbeing app (GP appointments, mental health support, wellbeing advice)Reporting Line Production Team LeaderInterview Process Stage 1: Face-to-face interviewIdeal Start Date* ASAP?Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.TPBN1_UKTJ

Vacancy - Lead Crane EngineerAre you excited by the opportunity to become the 'go to' individual for all Cranes within the Containers Division? Do you thrive on solving complex technical issues and guiding teams of Engineers? We are seeking a Lead Crane Engineer to support all Cranes in our Container Division, and help us keep the world moving!Your RoleAs Lead Crane Engineer, you will follow up on technical breakdowns on T1 STS, T2 QCs and CRMGS, identifying root cause, failure rates and possible solutions. You will plan and co-ordinate small to medium sized projects ensuring minimal disruption to operations in a safe and efficient manner. You will formulate, design and implement improvement modifications to existing and future plant and equipment with a view to improving operation, efficiency and life cycles. Working to Safe System of Work for all activities when onsite, you will also assist the planning team with scheduling both planned and reactive maintenance work in an effective and safe way.You will work closely with apprentices, mentoring and ensuring training targets and needs are met whilst also identifying training needs of the wider team. Providing technical assistance to the engineering team as and when required, you will control the quality, duration, cost and thoroughness of all works on Cranes.What you'll bringYou will have demonstrable hands on experience working on Cranes or similar equipment, ideally within a Container Terminal Port. Alongside this you will also have: Excellent fault finding skills, you will demonstrate a working knowledge of controls systems and principles.A commitment to maintaining Peel Health and Safety standards and understand the permit to work systems and accident reporting.Strong communication skills with the ability to guide and lead teams of Engineers.You will be a dynamic and eager individual with a can-do attitude and willingness to get stuck in, accept change and make things happen.With good knowledge of effective maintenance strategies (RCM,PM,CBM &TPM), you will ideally be qualified to a minimum HNC or equivalent in Mechanical or Electrical Engineering.Who are we?Already one of the UK's leading port and logistics companies, with a turnover in excess of £500 million, we are planning substantial capital investment over the next 5 years to achieve our vision of becoming the UK's leading port operator. We have ambitious plans to grow and transform the supply chain to benefit our customers. Our investments are decarbonizing our operations, which in turn is helping us work towards our goal of having Net Zero Port Operations by 2040. Much of our success depends on our unrivalled facilities and technology. But in our sector, it comes down to having the right talent to enable our organisation to grow.What we can offer youIn addition to a competitive salary, we have a strong track record of developing our people to expand their skills and experience and develop their careers. Valuing and rewarding our workforce is important to us which is why we offer a fantastic range of flexible benefits to choose from, such as: 27 Days Annual Leave (plus bank holidays)Up to 10% Matched Contribution PensionPeel Ports Flexible Benefits including salary sacrifice car scheme, healthcare cash plans, Cycle2Work Scheme, Critical Illness insurance, Gym Membership Scheme, Retail Vouchers, plus more!Commitment to learning and personal development - Last year we supported over 50,000 hours of training and personal development!We promote good physical and mental health and can provide additional support to colleagues via our Employee Assistance Programme when requiredIf you believe you have the skills and experience we are seeking and you want to join a thriving and ambitious place to work, we'd really like to hear from you!TPBN1_UKTJ

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here Aviation is one of the key focus sectors at AECOM, a business sector which sits within our number one rated global transportation engineering consultancy. Whilst we are already the number one aviation engineering consultancy by revenue globally, we see significant future growth potential as the sector recovers from the downturn induced by the Covid 19 outbreak. Our clients are now re-investing in their assets, to ensure they are in the right condition, but also to ensure their capacity needs of the future. AECOM is actively seeking talented and experienced Aviation Engineers across all levels for immediate employment in our Aviation hub offices in Croydon, Basingstoke, Manchester to work on commissions across the region, the wider UK and Ireland and overseas. Job Summary/Responsibilities • Performing a wide array of aviation-related pavement and civil infrastructure design, planning, construction support, and client management services for airport clients ranging from large airports to General Aviation airfields including directly with the airport owner/operator or for design and build contractors., • Design of airport engineering projects including runways, taxiways, aprons, vehicle service roads, airfield lighting and signage installation, navigational aids, drainage improvements, utility relocation and protection, and pavement rehabilitation on both small and large multi-discipline projects, • Co-ordination of or collaboration in the production of several projects concurrently, • Contributing towards and maintaining positive client relationships, • Support in the preparation of proposals., • Working with or implementing project Quality Assurance/Quality Control., • Preparation of engineering design reports, project definition documents, construction plans, works programmes and contract documents / technical specifications, • Collaborating with design teams consisting of multi-discipline design engineers and technicians, • Coordination with stakeholders as required to meet client requirements Ready to push the limits of what’s possible? Here’s what we’re looking for: • Experience and track record in civil design, planning and construction support ideally within the airport environment and working on large scale aviation projects., • Experience of undertaking design work as part of an integrated, multi-disciplinary and/or multi-organisation, collaborative team, • Knowledge of Civil Aviation standards and recommended practices (ICAO, EASA, CAA, FAA, MAA), • Knowledge of DMRB or highway civil engineering design, • Knowledge of drainage design., • Experience of or knowledge in NEC3/4 contracts, • Competent with Microsoft Office applications and ideally Microsoft Project., • Good knowledge/experience of AutoCAD, preferably with Civils 3D and AviPlan. Come grow with us. We develop projects from concept through operation providing engineering and construction services for multiyear, multimillion-dollar projects for major projects in Aviation. And let's not forget about the perks at AECOM. You'll enjoy a range of core and personalised benefits designed to support your future and well-being, customized to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days • Degree in Civil Engineering (or equivalent);, • Professional qualification: Working towards or holding Membership of the Institution of Civil Engineers (or equivalent). We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _ Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn Siobhan Osborne About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

At Wayve we're committed to creating a diverse, fair and respectful culture that is inclusive of everyone based on their unique skills and perspectives, and regardless of sex, race, religion or belief, ethnic or national origin, disability, age, citizenship, marital, domestic or civil partnership status, sexual orientation, gender identity, veteran status, pregnancy or related condition (including breastfeeding) or any other basis as protected by applicable law. Founded in 2017, Wayve is the leading developer of Embodied AI technology. Our advanced AI software and foundation models enable vehicles to perceive, understand, and navigate any complex environment, enhancing the usability and safety of automated driving systems. Our vision is to create autonomy that propels the world forward. Our intelligent, mapless, and hardware-agnostic AI products are designed for automakers, accelerating the transition from assisted to automated driving. In our fast-paced environment big problems ignite us—we embrace uncertainty, leaning into complex challenges to unlock groundbreaking solutions. We aim high and stay humble in our pursuit of excellence, constantly learning and evolving as we pave the way for a smarter, safer future. At Wayve, your contributions matter. We value diversity, embrace new perspectives, and foster an inclusive work environment; we back each other to deliver impact. Make Wayve the experience that defines your career! Wayve is looking for a Strategic Partnerships Manager to lead our most important partnerships across the compute infrastructure landscape. As we scale our next-generation embodied AI models, our need for cutting-edge compute—spanning GPUs, networking, and storage—is growing rapidly. This role sits at the intersection of internal strategy and external engagement. Internally, you'll collaborate closely with engineering to understand evolving infrastructure needs, partner with finance on consumption planning, and translate these requirements into a cohesive roadmap. Externally, you’ll work with leading hyperscalers and infrastructure providers to ensure they’re delivering the technical capabilities, operational reliability, and commercial terms Wayve needs to succeed. This is a high-impact, hybrid role that blends commercial ownership, analytical depth, and cross-functional coordination. You will be responsible for ensuring that conversations with partners are well-prepared, that decisions are informed by data, and that internal and external stakeholders are aligned. Your ability to connect infrastructure planning with Wayve’s broader commercial and technical priorities will be critical. • Own strategic compute partnerships across hyperscalers, GPU providers, and infrastructure vendors—managing day-to-day coordination, relationship health, and long-term alignment., • Drive commercial engagements, including pricing negotiations, capacity commitments, and contract execution, with an eye toward total cost, flexibility, and scale., • Work cross-functionally to align infrastructure planning with engineering, finance, product, and leadership—ensuring that vendor roadmaps match internal priorities., • Forecast future infrastructure needs based on product milestones, training demands, and program timelines—building and maintaining live models to support scenario planning., • Synthesize data and trends across GPU utilization, network architecture, and storage usage to generate actionable insights and support internal decision-making., • Track market developments in compute and cloud infrastructure—staying current on GPU SKUs, pricing trends, and vendor capabilities to inform procurement strategy., • Support general technical partnerships, offering analytical and commercial firepower across a broader set of initiatives spanning engineering and business needs., • Assist in vendor accountability and escalation, coordinating incident response, documenting service issues, and ensuring follow-through on remediation or commercial recovery., • Represent Wayve in external conversations, supporting senior leaders in high-stakes discussions while bringing clarity, preparation, and strategic alignment to every engagement., • Experience managing complex, externally facing partnerships in infrastructure, cloud, semiconductors, or AI ecosystems., • Strong commercial instincts, with comfort navigating contract terms, capacity forecasting, and procurement trade-offs., • Analytical skills to build models, synthesize trends, and drive insight-backed recommendations., • A collaborative operator who thrives in cross-functional environments and can build trust with engineers, finance leads, and partners alike., • Excellent communication skills—clear, concise, and able to tailor messaging for technical or executive audiences., • A bias toward ownership and forward momentum, even in the face of ambiguity or incomplete information. This is a full-time role based in our office in London. At Wayve we want the best of all worlds so we operate a hybrid working policy that combines time together in our offices and workshops to fuel innovation, culture, relationships and learning, and time spent working from home. We understand that everyone has a unique set of skills and experiences and that not everyone will meet all of the requirements listed above. If you’re passionate about self-driving cars and think you have what it takes to make a positive impact on the world, we encourage you to apply. For more information visit _ To learn more about what drives us, visit _ DISCLAIMER: We will not ask about marriage or pregnancy, care responsibilities or disabilities in any of our job adverts or interviews. However, we do look to capture information about care responsibilities, and disabilities among other diversity information as part of an optional DEI Monitoring form to help us identify areas of improvement in our hiring process and ensure that the process is inclusive and non-discriminatory.

Carrier & Operator Engagement • Build and manage strategic relationships with Tier-1 and Tier-2 MNOs across multiple regions, • Act as the primary point of contact between CloudCom and operator teams (technical, commercial, legal, and security), • Lead operator onboarding for Open Gateway / Network API enablement Network API Commercialization • Drive adoption of Network APIs including:, • Number Verification, • SIM Swap Detection, • KYC & Identity APIs, • Device Status & Line Status, • Silent Authentication, • Define commercial models (revenue share, per-transaction, success-based pricing), • Support go-to-market strategies with operators and enterprise customers Standards & Ecosystem Alignment • Work closely with GSMA Open Gateway and CAMARA standards, • Ensure operator implementations align with CAMARA API specifications, • Represent CloudCom in industry forums, operator workshops, and partner meetings Internal Collaboration • Coordinate with Product, Engineering, Security, and Legal teams, • Translate operator network capabilities into developer-ready APIs, • Support roadmap planning based on operator readiness and market demand Operational & Regulatory Support • Assist operators with:, • Security and compliance alignment, • API SLAs and operational readiness, • Regulatory considerations (KYC, privacy, consent), • Support pilots, proofs of concept, and commercial launches Required Qualifications • Strong experience in carrier relations, telecom partnerships, or wholesale telecom, • Solid understanding of Mobile Network Operator environments, • Hands-on exposure to Network APIs, CPaaS, or telco digital platforms, • Knowledge of GSMA Open Gateway and CAMARA APIs (or strong willingness to learn), • Ability to engage both technical and commercial stakeholders, • Excellent communication and negotiation skills, • Experience working with global operators and cross-regional teams Preferred Qualifications • Experience with:, • Identity & Authentication APIs, • Telco security standards (OAuth2, OIDC, CIBA), • Network Exposure concepts (NEF, network slicing, identity APIs), • Background in CPaaS, fintech, or digital identity solutions, • Previous involvement in operator API monetization initiatives What CloudCom Offers • Opportunity to work at the forefront of Open Gateway & Network APIs, • Direct exposure to global telecom operators, • High-impact role shaping operator monetization strategies, • Flexible, international working environment, • Competitive compensation based on experience Ideal Candidate Profile • Strong telco network understanding with a business-first mindset, • Comfortable navigating complex operator environments, • Passionate about transforming network capabilities into digital products, • Able to operate independently and influence across organizations Required Qualifications • Bachelor's degree in business administrative or any other related feild., • 10+ years of experience in carrier relations, telecom partnerships, or wholesale telecom, • Solid understanding of Mobile Network Operator environments, • Hands-on exposure to Network APIs, CPaaS, or telco digital platforms, • Knowledge of GSMA Open Gateway and CAMARA APIs (or strong willingness to learn), • Ability to engage both technical and commercial stakeholders, • Excellent communication and negotiation skills, • Experience working with global operators and cross-regional teams Preferred Qualifications • Experience with:, • Identity & Authentication APIs, • Telco security standards (OAuth2, OIDC, CIBA), • Network Exposure concepts (NEF, network slicing, identity APIs), • Background in CPaaS, fintech, or digital identity solutions, • Previous involvement in operator API monetization initiatives What CloudCom Offers • Opportunity to work at the forefront of Open Gateway & Network APIs, • Direct exposure to global telecom operators, • High-impact role shaping operator monetization strategies, • Flexible, international working environment, • Competitive compensation based on experience Ideal Candidate Profile • Strong telco network understanding with a business-first mindset, • Comfortable navigating complex operator environments, • Passionate about transforming network capabilities into digital products, • Able to operate independently and influence

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here Aviation is one of the key focus sectors at AECOM, a business sector which sits within our number one rated global transportation engineering consultancy. Whilst we are already the number one aviation engineering consultancy by revenue globally, we see significant future growth potential as the sector recovers from the downturn induced by the Covid 19 outbreak. Our clients are now re-investing in their assets, to ensure they are in the right condition, but also to ensure their capacity needs of the future. AECOM is actively seeking talented and experienced Aviation Engineers for immediate employment in the North-West or West Midlands of England to work on commissions across the region and the wider UK and Ireland. Job Summary/Responsibilities • Performing a wide array of aviation-related pavement and civil infrastructure design, planning, construction support, and client management services for airport clients ranging from large airports to General Aviation airfields including directly with the airport owner/operator or for design and build contractors., • Design of airport engineering projects including runways, taxiways, aprons, vehicle service roads, airfield lighting and signage installation, navigational aids, drainage improvements, utility relocation and protection, and pavement rehabilitation on both small and large multi-discipline projects, • Co-ordination, and production of several projects concurrently, • Maintain positive client relationships, • Support in the preparation of proposals., • Implement project Quality Assurance/Quality Control., • Preparation of engineering design reports, project definition documents, construction plans, works programmes and contract documents / technical specifications, • Collaborating with design teams consisting of multi-discipline design engineers and technicians, • Coordination with stakeholders as required to meet client requirements Ready to push the limits of what’s possible? Here’s what we’re looking for: • Aviation experience, • Experience and track record in civil design, planning and construction support within the airport environment and working on large scale aviation projects., • Experience of undertaking design work as part of an integrated, multi-disciplinary and/or multi-organisation, collaborative team, • Knowledge of Civil Aviation standards and recommended practices (ICAO, EASA, CAA, FAA, MAA), • Knowledge of DMRB or highway civil engineering design, • Knowledge of drainage design., • Knowledge of NEC3/4 contracts, • Competent with Microsoft Office applications and ideally Microsoft Project., • Good knowledge/experience of AutoCAD, preferably Civils 3D. Come grow with us. We develop projects from concept through operation providing engineering and construction services for multiyear, multimillion-dollar projects for major projects in Aviation. And let's not forget about the perks at AECOM. You'll enjoy a range of core and personalised benefits designed to support your future and well-being, customized to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days • Degree in Civil Engineering (or equivalent);, • Professional qualification: Membership of the Institution of Civil Engineers (or equivalent) or working towards a similar qualification. We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _ At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn Siobhan Osborne #EVB About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

About Rated 🌐 _ 🌐 Rated offers node and node operator ratings, robust data pipelines and the most comprehensive infrastructure dataset, for Ethereum. In a few short months since founding, we have built a product that users love, and a product that offers a real service to the ecosystem. Our mission is to promote transparency, good standards and improve the foundation of Web3. Put simply, we cannot imagine a world where anywhere near 1% of the worlds transactions run on a blockchain, without transparency at the base layer. We are here to enable this future. 💼 The Role We welcome applications from folks that don’t exactly fit the mold of the explicit roles we are hiring for, but find themselves intellectually taken and mission aligned with the vision we’re pursuing. You might be: • a budding Protocol Researcher/Designer with engineering and/or data skills;, • a Developer Evangellist with a strong track record of success;, • a visionary Brand person that resonates with our mission and vision;, • a Community Manager or Customer Success person that’s adept in Web3 infrastructure;, • a seasoned Enterprise Sales leader with experience in sales cycles;, • or a talented up and comer that’s committed to the industry and its future.But also you might not be those things—surprise us!, • We’re a highly technical 12 person team (and growing!), working in a hybrid/remote set-up, with a home base in London, UK., • We are all deeply embedded in the ecosystem and are working very close to the fold, in terms of research and development in Web3 infrastructure., • Competitive salary & equity package, • Flexible PTO, • Hybrid/remote work set-up with a homebase in London, • We are also offering visa sponsorship for candidates who wish to relocate to the UK.

Agricultural Plant Operator This role is not eligible for UK Visa Sponsorship - the successful applicant will need to have a pre-existing Right to Work in the UK in order to be offered an employment contract. Are you an experienced machinery operator looking for a hands-on role within a growing agricultural processing business? Do you have experience operating conveyors, hydraulic equipment, or industrial processing machinery within an agricultural, feed, biomass, grain handling, or similar environment? Are you looking for a permanent full-time position with overtime opportunities and the chance to become a key member of a small, supportive team? Location of the Job Cornwall, South West of England. Salary and Benefits Package Paying £35,000 - £40,000 per year DOE Possible accommodation available Overtime opportunities available. Additional Information This is a permanent full-time position. 40 hours per week plus overtime opportunities. Monday - Friday working. Training and development opportunities available. Progression opportunities as the business continues to grow. About The Company A progressive mixed farming business in Cornwall specialising in sustainable crop production, premium animal bedding and feed products, biomass products, forage, and environmentally focused agricultural enterprises. The Job Role Details As Agricultural Plant Operator, you will play an important role within a small team responsible for producing premium animal bedding and feed products from farm-grown crops. Working closely with the Production Manager and Lead Operator, you will operate a range of agricultural processing equipment and production machinery while helping to maximise efficiency, maintain quality standards, and ensure the continuous running of the processing lines. This is a hands-on role within a clean agricultural processing environment and offers excellent opportunities for progression as the business continues to expand. Key Responsibilities • Operate agricultural processing machinery, conveyors, and associated plant equipment safely and efficiently., • Monitor and maintain the continuous operation of production lines., • Work closely with the Production Manager and Lead Operator to maximise efficiency and throughput., • Assist with daily machinery checks and routine maintenance activities., • Operate and work around hydraulic and mechanical equipment safely., • Ensure all production, quality control, and operational records are completed accurately., • Follow company quality assurance procedures and safe working practices., • Identify opportunities to improve operational efficiency and plant performance., • Support other production activities across the site as required., • Provide cover for the Lead Operator when required. Ideal Person Skills & Qualifications • Previous experience operating agricultural, industrial, or processing machinery., • Experience working with conveyors, mechanical equipment, hydraulic systems, or processing plant machinery., • Agricultural, feed mill, biomass, recycling, quarrying, grain handling, or similar processing experience would be highly advantageous., • Practical understanding of machinery operation and basic fault finding., • Forklift licence and/or telehandler experience would be advantageous., • Good communication skills and the ability to work effectively within a small team., • Strong attention to detail and commitment to quality standards., • A proactive approach with a desire to improve processes and performance., • Full UK Driving Licence. How to Apply Please click on the APPLY NOW button. As we are a specialist recruitment business within the Agricultural and Farming industry, we do require that ALL applicants must hold an NVQ Level 2, Scottish NVQ Level 2 or an equivalent qualification which is relevant and necessary for the job that you are applying for. The Industry (Key Words) Agricultural Plant Operator, Plant Operator, Agricultural Processing, Agricultural Machinery Operator, Feed Mill Operator, Biomass Operator, Processing Operator, Industrial Plant Operator, Grain Handling, Agricultural Operations, Farming Jobs Cornwall, Agricultural Jobs South West. We thank all applicants who apply for this role. However, please be advised that only those shortlisted for an interview will be contacted. Please be assured that your job application will be managed in complete confidence and your personal details will not be passed to any third party without your prior permission. Established in 2013, Agricultural and Farming Jobs provide outstanding recruitment, headhunting, and job advertising services. We are the trusted recruitment partner of choice to industry-leading organisations across the UK and internationally. We recruit specifically for all roles within the sectors of: Agriculture, Farming, Horticulture, Food and Fresh Produce, Vet, Pet and Animal Health, Agrochemicals, Fertilisers and Seeds, Software and Technology, Machinery, Technical and Engineering, and specialist Education. JBRP1_UKTJ

Field Service & Commissioning Engineer UK & Global TravelSouthampton Based£40-50k + Benefits Are you an electrically biased engineer who thrives on solving complex problems in real-world environments? Do you enjoy international travel and being hands-on with advanced industrial systems? If so, this could be your next move. Were looking for a Field Service & Commissioning Engineer to install, commission, and support high-spec OEM process equipment at customer sites across the UK and worldwide. This is a dynamic, customer-facing role combining electrical fault finding, system validation, and technical support with factory-based testing and continuous improvement work. What youll be doing: Installing and commissioning specialist process equipment on customer sitesPerforming planned and reactive service, diagnostics, and repairsFault finding on control panels, field wiring, PLC-controlled systems and integrated machinerySupporting FAT and SAT activitiesCalibrating instrumentation and validating system performanceProviding on-site technical support and operator trainingFeeding back technical insights to support ongoing design improvements What were looking for: Strong electrical background (HNC/HND/Degree or equivalent experience)Experience with industrial control systems (Siemens, Allen-Bradley etc.)Confident fault finding on single/three-phase systems and control circuitsAbility to read electrical schematics and P&IDsExperience in field-based, customer-facing engineering rolesComfortable with UK and international travel (1012 trips per year) When not travelling, you'll be expected to work onsite in Southampton, supporting the build, test and validation of these systems. This role offers real variety, global exposure, and the opportunity to work with advanced heating and process technologies in technically challenging environments. If youre practical, proactive, and ready to take ownership on site wed love to hear from you. JBRP1_UKTJ

Associate Mechanical Operator Location: RAF Marham Duration: 20 months Hourly Rate: £21 PAYE or £28.11 via umbrella (inside IR35) Working Pattern: Full-time, onsite Security Clearance: BPSS with SC (subject to ITAR restrictions) About the Role We are seeking multiple Associate Mechanical Operators to join our team at RAF Marham. This is an exciting opportunity to work within a highly skilled, multi-disciplinary environment supporting aircraft maintenance and repair activities. In this role, you will carry out metalworking and corrosion remediation tasks on aircraft, contributing directly to operational readiness and safety. You'll work as part of a close-knit team, following approved maintenance procedures and technical documentation. Key Responsibilities • Performing maintenance activities in line with Approved Technical Information and risk assessments, • Ensuring all airworthiness records are accurately maintained, • Documenting all work undertaken and reporting/escalating issues as required, • Complying with organisational procedures, including MOE and associated standards, • Applying Safety Management System principles, including human factors and error management, • Supporting Continuing Airworthiness Assurance requirements, • Undertaking hands-on aircraft work, including:, • Preparation of metal and composite structures for repair, • Drilling and reaming of aircraft panels and structures, • Application of adhesive bonding, • Removal and installation of aircraft fasteners Knowledge & Experience Essential Skills: • Experience using manual and pneumatic tools, • Experience preparing metal and/or composite surfaces for repair, • Knowledge of drilling, honing, and reaming techniques, • Experience installing and removing aircraft fasteners, • Familiarity with adhesive bonding processes Knowledge:, • General understanding of aircraft structures or mechanical systems, • Awareness of team integration and continuous improvement principles Qualifications, • Engineering Apprenticeship (ideally Aeronautical Engineering) or military equivalent, • Minimum NVQ Level 2 (or equivalent), • Recognised certifications (e.g. City & Guilds, IMI, Edexcel, EAL, SEMTA, ATA), • Equivalent experience supported by formal evidence (e.g. military service records) will be considered About the Team You'll be joining a collaborative, supportive team operating in a fast-paced and safety-critical environment, where quality and precision are essential. JBRP1_UKTJ

Portsmouth based, PO6 Up to £37,500 dependant upon experience, plus 33 days holiday (including bank holidays), paid lunch break, pension, life assurance, employee assistance programme, wellbeing support, and flexible benefits including cycle to work scheme About the Role As an experienced Kit Cutter for UPCS, you will be instrumental in our automotive manufacturing operations, utilizing Zund machinery to prepare precise composite kits that keep our supply chain moving. You will act as a proactive collaborator within our team, taking pride in your work and contributing to our commitment to delivering high-quality, efficient, and sustainable solutions for our customers. As part of your key responsibilities youll: Be responsible for the supply and control of cut kits for laminating as per the work schedule Be responsible for stock control and storage of composite materials Adhere to all quality standards Digitise templates to provide accurate kits Identify and implement efficiency gains Liaise with the material buyers and ensure a clear understanding of stock is known by all relevant parties About You Wed love you to have the following skills and experience, but please apply if you think youd be able to perform well in this role! Composite kit cutting experience OR a similar role Experience with Zund and Blackman and White Kit Cutting machines Experience with draft sight desirable Experience of handling composites materials, its out life and its correct handling Ability to work independently, to be self- driven and able to set and monitor own goals Competent use of Microsoft suite About Unipart We are a supply chain performance improvement partner. We Design, Make, Move, and Improve components in our customers supply chains, keeping their operations and assets moving and working better, for longer. Through our commitment to continuously driving operational efficiencies, we improve performance - saving time, cost, and carbon. Our ambition is to be the driving force behind efficient, resilient, and sustainable supply chains. Equality, Diversity, and Inclusion We believe that a great workplace is one where you can bring your whole self to work. Our recruitment process is designed to be accessible, inclusive, and based entirely on merit. We define merit through a combination of technical skills and the core behaviours that help our people thrive at Unipart. We welcome applications from everyone, regardless of background or circumstances. We are committed to a policy of equal opportunity that exceeds our statutory obligations under the Equality Act 2010 and subsequent legislation. Whether its your age, disability, neurodiversity, gender identity, family status, or any other characteristic that makes you you - it is your talent and potential that we value most. Adjustments for you: We want you to perform at your best. If you require any reasonable adjustments or have specific accessibility needs at any stage of the application or interview process, please let us know. We are here to support you. You may have experience of the following: CNC Operator, Composites Technician, Materials Cutter, Kit Preparation Operative, Composite Materials Handler, Laminating Technician, Manufacturing Operative, Production Technician, Cutting Room Operative, CNC Cutting Machine Operator REF-229 162 JBRP1_UKTJ

Astute's Renewables team is partnering with a leading renewable energy operator to recruit a Senior Electrical Technician to support renewable energy assets across the South Midlands and South England region. The Senior Electrical Technician role comes with a salary of up to £70k depending on experience, plus an excellent benefits package including car allowance. If you have experience as a Senior Electrical Engineer or Senior Electrical Technician and are looking for your next career move, we'd love to hear from you - apply today by submitting your CV. Responsibilities and duties of the Senior Electrical Technician Reporting to the Head of Technical Services you will: • Provide technical support for the operation, maintenance and troubleshooting of HV and LV electrical systems across renewable energy assets, • Lead and support engineering projects, upgrades and modifications from initial concept through to completion, • Review maintenance activities and technical data to identify trends, defects and opportunities for performance improvement, • Support the development and review of engineering documentation, specifications and technical standards, • Coordinate with internal teams, contractors and suppliers to ensure successful project delivery and operational support, • Assist with Root Cause Analysis investigations and implement corrective actions to improve system reliability, • Mentor and provide guidance to junior engineers and technical personnel within the wider engineering team, • Support planning and resource coordination activities while ensuring compliance with health, safety and quality standards Professional qualifications We are looking for someone with the following: • Degree, HNC or HND in Electrical Engineering or equivalent qualification, • Strong background in HV electrical systems, including transformers, switchgear, cables and protection systems, • Minimum 5 years' experience in electrical engineering within power generation, utilities or renewable energy sectors, • Experience working on renewable energy assets such as wind, solar or battery storage (desirable) Personal skills The Senior Electrical Technician role would suit someone who is: • Strong technically with a practical, solution-focused approach to engineering problems, • Comfortable working in a leadership capacity and supporting junior team members, • Effective at communicating with a range of stakeholders, both technical and non-technical, • Well organised with the ability to prioritise workload and manage multiple tasks, • Flexible, proactive and committed to maintaining high standards of safety and quality Salary and benefits of the Senior Electrical Technician role • Salary up to £70,000, • EV Vehicle, • Market-leading pension scheme, • Flexible benefits package including electric vehicle leasing and health insurance options, • Enhanced parental leave, • Discounts and employee pricing schemes, • Ongoing training and career development opportunities #LI-MN1 INDREN Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful. JBRP1_UKTJ

Astute's Renewable Energy Team is exclusively partnering with a key player in the Solar and BESS market who are looking for a HV Contracts Manager to join the team. The role is a pivotal one and the purpose is to ensure operational excellence and to ensure the provision of HV support across the business is there when required. This HV Contracts Manager role comes with a salary up to £55,000, incremental supplements for additional qualifications, a company vehicle plus bonus and generous benefits package. The ideal location would be in the South around Oxfordshire but we're open to a more remote option too. If you're a HV Contracts Manager and are looking to work for an innovative and proven Solar and BESS operator, EPC and developer, please get in touch. Responsibilities and duties of the HV Contracts Manager role Reporting to the HV Manager you will: • Manage all key personnel/companies both internally and externally relating to the HV activities, • Planning and execution of HV switching, isolations and earthing up to 33kV (this is subject to internal sign off with competence), • Schedule HV operations in different regions, staying up to date with any contractual obligation, • Assist with understanding and interpreting client requirements within the HV scope of contract, • Ensure that proactive, annual maintenance schedules are created and adhered to, • Assess the existing HV supply chain and ensure it's effectiveness, suggesting any improvements/changes with a data-driven approach, • Be able to carry out some HV remedial works when the decision is made to do the works internally, • Provide HV technical support for Field Engineers, • Full job spec available on application and request post telephone call with Astute Professional qualifications We are looking for someone with the following: • Experience in large scale renewables projects, ideally BESS and/or solar, • Experience switching up to 33kV, 66kV would be great, • At least a NVQ level 3 in electrical installation, higher qualifications hugely desirable Personal skills The HV Contracts Manager role would suit someone who is: • A strong communicator, • Excellent organisational skills, • Someone proactive and solutions-focussed Salary and benefits of the Business Development Manager role • Up to £55,000 basic salary, • Increases depending on authorisations, • Company vehicle, • Bonus up to 12.5%, • Life insurance, • Private healthcare, • Great pension, • 33 days holiday inc BH #LI-TN1 INDREN Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful. JBRP1_UKTJ

Field Service Engineer - CNC Woodworking Machinery (M4 Corridor) Location: UK Wide / Regional Patch Salary: £35-40,000 + Door to Door Overtime + Company Vehicle + Phone (OTE £50-55,000) Shift: Monday - Friday Days The Role As a Field Service Engineer, you will be responsible for the installation, servicing, maintenance, and breakdown support of CNC woodcutting and woodworking machinery at customer sites across the UK. You will work closely with customers to ensure machinery is operating efficiently while delivering excellent technical support and customer service. Key Responsibilities • Installation and commissioning of CNC woodworking machinery, • Fault finding on electrical, mechanical, and control systems, • Planned preventative maintenance and reactive breakdown support, • Diagnosing PLC and automation faults, • Providing operator training and technical guidance to customers, • Completing service reports and documentation, • Supporting continuous improvement and machine optimisation Requirements • Previous experience working on CNC machinery, ideally woodworking or cutting equipment, • Strong electrical and mechanical fault-finding skills, • Ability to read electrical schematics and engineering drawings, • Experience with PLC fault finding advantageous, • Comfortable working independently in a field-based role, • Full UK driving licence, • Strong communication and customer-facing skills Benefits • Paid overtime, • Company vehicle, • Laptop and mobile phone, • Pension scheme, • Ongoing manufacturer training and development, • Opportunities for progression within a growing business This is a fantastic opportunity for a motivated engineer looking to join a well-established company within the CNC and woodworking machinery sector. JBRP1_UKTJ

Location: Hybrid / Multi-Site ideally based near Peterborough, Lincoln, Scunthorpe, Hull, Doncaster, Grantham or the East Coast corridor Salary: Circa £57,000 + £6,000 car allowance, with higher salary considered DOE Job Type: Permanent, Full-Time Sector: Renewable Energy / Anaerobic Digestion / Process Engineering Are you an experienced EC&I Engineer, Electrical Engineer, Controls Engineer, Instrumentation Engineer, Senior Electrical Engineer, High Voltage Engineer, Control Systems Engineer or Automation Engineer looking for a senior technical role with real influence? This is an excellent opportunity to join a growing renewable energy business as its in-house Electrical, Control and Instrumentation specialist, supporting a portfolio of operational anaerobic digestion and process plant sites. This is not a routine site maintenance role. As Group EC&I Engineer, you will take ownership of electrical and control standards across multiple sites, supporting infrastructure upgrades, control system improvements, technical troubleshooting, supplier management and long-term plant reliability. You will play a key role in shaping group-wide EC&I standards, improving site consistency and supporting future technical development across renewable energy and process plant operations. Whats in It for You? Circa £57,000 salary £6,000 car allowance Higher salary considered for the right candidate Permanent, full-time position Senior group-level EC&I role Hybrid working with multi-site responsibility Opportunity to influence EC&I standards across multiple operational sites Varied work across renewable energy, anaerobic digestion and process engineering Involvement in infrastructure upgrades, reliability improvements and technical projects Long-term opportunity within a growing renewable energy business Location and Working Pattern This is a hybrid, group-wide role covering operational sites across East Yorkshire, North Lincolnshire and Cambridgeshire / Peterborough. Your home site would usually be the company site closest to your home location. However, you will need to travel across the group as required, particularly where a specific technical issue, infrastructure project, upgrade or site requirement needs your support. For ease of travel, this role would suit someone based along the eastern side of the country, ideally within reasonable reach of the main operating areas. Suitable locations could include Peterborough, Lincoln, Scunthorpe, Hull, Doncaster, Grantham, Boston, Spalding, Newark, Grimsby, York, Beverley, Huntingdon, Cambridge or surrounding areas. There may also be occasional escalation support as part of the role. This would not usually be the first point of contact, as issues would normally be escalated through site engineering, plant management and maintenance management before reaching the Group EC&I Engineer. In many cases, this may involve phone-based technical support or remote advice rather than site attendance. The Role As Group EC&I Engineer, you will act as the companys in-house specialist for electrical, control and instrumentation engineering. You will provide technical support and troubleshooting across existing installations, maintenance activities, repairs, equipment replacement, site upgrades and new infrastructure projects. You will develop group-wide technical standards and standard EC&I solutions to improve consistency across current and future assets. You will assess existing infrastructure, identify obsolescence and recommend suitable upgrade plans. A key part of the role will involve working with internal engineering teams and external EC&I vendors to standardise SCADA systems, improve process control and support automation of reporting systems linked to reliability and plant performance. Key Responsibilities Develop company-wide EC&I standards, specifications and technical solutions Support High Voltage and Low Voltage infrastructure across operational sites Review existing assets and identify obsolescence, reliability and upgrade requirements Standardise SCADA, PLC, HMI, DCS and control system approaches Support automation and reporting improvements linked to process reliability Provide EC&I troubleshooting support for existing and new installations Support maintenance, repair and replacement of EC&I equipment and components Liaise with Distribution Network Operators on High Voltage connections Support supplier negotiation, design standards and infrastructure contracts Produce and update electrical safety procedures and company standards Create EC&I specifications and technical supplier requirement documents Review supplier and installer documentation Investigate and resolve technical problems Produce technical assessment reports Manage technical interfaces with EC&I suppliers, installers and internal teams Support health and safety procedures, risk assessments and site safety standards About You You will be a technically credible EC&I professional with strong experience in industrial, process, energy, utilities, manufacturing or similar environments. You may currently be working as an EC&I Engineer, Senior EC&I Engineer, Electrical Engineer, Senior Electrical Engineer, Controls Engineer, Instrumentation Engineer, Control Systems Engineer, Automation Engineer, HV Engineer or Electrical Project Engineer. You will ideally have experience across: EC&I engineering design, maintenance or project delivery High Voltage power systems Low Voltage power distribution IEE Wiring Regulations Motor Control Centres Process instrumentation SCADA systems PLC, HMI or DCS control systems Electrical safety systems and standards DNO liaison and High Voltage connections Supplier, installer or contractor technical management Experience within anaerobic digestion, biogas, gas production, renewable energy, utilities, chemical, water, wastewater, food manufacturing, FMCG or wider process plant environments would be highly desirable. Qualifications You will ideally hold an NVQ Level 4 Electrical or Control & Instrumentation apprenticeship, or an equivalent qualification. Highly desirable experience or qualifications include: High Voltage networks and Distribution Network Operator experience CompEx 14 for electrical engineers working in hazardous areas CompEx 11 for engineers working in hazardous areas Strong knowledge of electrical safety standards Experience with SCADA, PLC, HMI or DCS systems from major manufacturers Practical experience in EC&I design, maintenance and construction projects Why Apply? This is a rare opportunity to step into a senior group-level EC&I role within renewable energy. You will have the chance to shape technical standards, improve reliability, influence infrastructure decisions and support the development of multiple operational process plant sites. For an experienced EC&I Engineer who wants more technical ownership, broader influence and genuine involvement in plant improvement, this is an excellent opportunity. Apply Now If you are an experienced EC&I Engineer, Electrical Engineer, Controls Engineer, Instrumentation Engineer, Senior Electrical Engineer, High Voltage Engineer, Control Systems Engineer or Automation Engineer, apply today for a confidential conversation. JBRP1_UKTJ

We are looking for a highly motivated and adaptable Multiskilled Operator to join our team. In this role, you will act as an expert operator across multiple operational areas, applying core processing principles to handle various waste streams and convert them into Cemfuel. This is a dynamic, hands-on position that goes beyond routine operations. You will play a key role in supporting site performance, safety, and continuous improvement while contributing across a wide range of operational and technical activities. Key Responsibilties: • Safely operate plant and equipment following procedures, • Work flexibly across different operational areas, • Support maintenance, inspections, and troubleshooting, • Respond to emergencies and report safety concerns, • Maintain housekeeping standards and wear PPE, • Meet throughput targets and maintain accurate records, • Participate in training and continuous development, • Assist with general site duties as required Do you have what it takes? Other Essential Skills: • Computer literacy especially in Microsoft Word, Excel and Outlook, • Problem-solving skills, • Cool under pressure Desirable Skills: • Health & safety qualification (IOSH), • Knowledge of solvent processing and blending principles and tools., • Forklift truck licence., • Driving licence to assist with learning of site shunter, van tanker, hook loader etc., • Permit training, • First aid at work, • Experience in chemicals / waste industry, • Emergency response experience What's in for you? • Competitive salary £26,650.00 + Quarterly Bonus, • 6% Contributory Pension, • Flexible benefits (access to our benefits platform for discounts and cash back on shopping purchases, gyms and leisure activities, cycle to work scheme and dedicated wellbeing centre) JBRP1_UKTJ

Operator Anaerobic Digestion c£32,000 Inverness MC Technical Recruitment is currently looking to recruit an Operator to work on an Anaerobic Digestion plant based in Inverness. Reporting to the site manager, you will work on a 4 on 4 off days basis & be responsible for the day-to-day effective running of the plant & working as part of call out rota to ensure the plant is covered outside of shift hours. As the Operator, you will be responsible for: • The day-to-day operations of the AD plant, • Running the plant via a DCS & SCADA, • Visual fault finding on the plant & equipment, • Carrying out first line maintenance, • Feeding the plant with fuel, • Operating a telehandler or other machinery, • Maintaining the cleanliness of the site, • Other duties as required To be considered for this role you should have: • An engineering or agricultural qualification., • The ability to participate in a call out rota, • A Telehandler license or mobile plant experience, • The ability to work on a 4 on 4 off days basis, • A full, clean driving licence What's on offer? • A competitive salary up to £32,000 + benefits, • Call out pay, • 23 days holiday (so 6.6 weeks), • The opportunity to work within the Green Energy sector To apply: If you are interested in this role please apply via the link below or contact Matt George at MC Technical Recruitment on 07414220177 / for a confidential chat. JBRP1_UKTJ

Astute's Power team is partnering with a leading Energy company in the UK to recruit an Operations Technician to join its CCGT site in Rochester, Kent. The Operations Technician role comes with a starting salary of up to £49,000 basic salary, £12,000 Shift Allowance and £2,100 SE allowance and very competitive benefit package including 20% bonus, medical insurance and 10% pension contributions. If you are an experienced DCS Operator on process plant who holds a HNC, or would be willing to work towards one, please submit your CV to apply today. Responsibilities and duties of the Operations Technician role Reporting to the Production Team Leader you will: • Operate and monitor the CCGT plant to ensure safe, efficient and reliable generation performance., • Support the Production Team Leader with all production and operational activities across the site., • Analyse plant performance data and diagnose operational issues to maximise plant availability., • Start, stop and operate plant systems using both control room and field-based equipment., • Ensure compliance with all health, safety, environmental and operational procedures., • Apply and develop competency under the site's safety rules, progressing towards Senior Authorised Person and Safety Coordinator responsibilities., • Carry out routine plant inspections, testing activities and operational checks., • Communicate effectively with internal teams and external stakeholders to support operational requirements and grid obligations., • Supervise contractors and support maintenance activities within areas of competence., • Contribute to continuous improvement initiatives, operational projects and plant performance optimisation. Professional qualifications We are looking for someone with the following: • HNC (or equivalent) in an Engineering discipline, or commitment to completing the qualification as part of ongoing development., • A minimum of two years' experience operating and/or maintaining a CCGT plant or similar heavy process environment., • Strong understanding of health, safety and environmental legislation, with experience working within permit-to-work and safety rule systems., • Ability to analyse plant performance, diagnose technical issues and support maintenance planning activities across multiple engineering disciplines. Navy leavers with relevant watchkeeping experience on steam-raising plant are encouraged to apply. Personal skills The Operations Technician role would suit someone who is: • Self-motivated and proactive, with a flexible approach to work and a willingness to learn and develop., • A strong team player who collaborates effectively with colleagues, contractors and stakeholders at all levels., • Calm and analytical under pressure, with the ability to prioritise workload and make informed operational decisions. Salary and benefits of the Operations Technician role • Starting salary of up to £49,000 + £12,400 shift allowance +£2,100 southeast allowance, • Bonus of up to 20% + private medical insurance, • EV salary sacrifice scheme, 10% pension employer contributions + LTIP entitlement (#LI-RW1) INDPOW Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful. JBRP1_UKTJ

A fast-growing refreshment provider is expanding and has created a new opportunity for an experienced Coffee Field Service Engineer to join their team. They are looking for someone based in the RH or BN postcode region. The role offers a competitive basic salary of up to £38k, with additional bonus company car with personal usage, full door to door payments, 33 days holiday and much more. You'll also have the chance to work with some of the most recognisable high-street chains, carrying out servicing and repairs on a range of commercial coffee machines. This position has been created due to continued regional growth, and the company is known for offering genuine long-term progression. As a respected name in the industry, you will receive exceptional training, ongoing upskilling programmes, and strong support for career development. Responsibilities of Coffee Field Service Engineer • Install, commission, and set up coffee equipment to the highest standards to ensure a smooth and positive customer experience., • Carry out planned preventative maintenance across a wide range of coffee equipment to maintain reliability and performance., • Respond to reactive breakdowns and complete repairs with a strong focus on achieving first-time fixes., • Perform electrical safety checks, including safe isolation, in line with company procedures and safety regulations., • Provide operator training to customers on correct usage and cleaning procedures to improve equipment longevity and user confidence. Benefits of Coffee Field Service Engineer • Hands-on experience as a Coffee Field Service Engineer, ideally with a background repairing coffee or vending machines, however we will also consider applications from other electrical and mechanical industries such as catering equipment, white goods and gaming., • Strong Electrical and Mechanical background., • Familiarity with brands like Cimbali, WMF, Coffetek, and Evoca is a plus., • Problem-solving mindset with excellent attention to detail., • Confident communicator, capable of explaining technical information to customers in clear terms., • Relevant technical qualifications in electrical, mechanical, or engineering fields are advantageous., • A valid, clean UK driving license is essential. Benefits of Coffee Field Service Engineer • Earn up to £38,000 per annum, plus opportunities for overtime., • On average £3,000 a year bonus, • 33 days of annual leave, • Company Vehicle with personal usage, • Full Door to Door to payments, • Ongoing training and development to keep your skills sharp and up to date with multiple training rooms across UK. If you're an experienced Coffee Field Service Engineer with a passion for delivering quality work and exceptional customer service, we'd love to hear from you. Apply now and take your career to the next level! JBRP1_UKTJ

Manufacturing / Electronics Test Engineer (Production Environment) Guidant Global is partnering with a leading UK defence organisation to recruit a hands-on Electronics Test Engineer to support the manufacturing test and fault diagnosis of complex electrical and electronic assemblies. This is a practical, production-based role focused on diagnosing faults down to circuit card and component level, working directly with test equipment in a manufacturing environment not a desk-based design role. What youll be doing • Supporting manufacturing test and diagnostics of electrical and electronic sub-systems, • Investigating failures down to circuit card and component level, • Using a wide range of manual and automated test equipment, • Introducing and supporting new test facilities, specifications and operator instructions, • Working closely with production and quality teams to maintain build schedules, • Contributing to defect reviews and corrective actions within a controlled defence environment What were looking for Essential • HNC (or equivalent) in Electronic / Electrical Engineering, • Strong hands-on experience with electronic test and fault finding, • Good understanding of digital and analogue measurement techniques, • Experience using equipment such as oscilloscopes, DMMs, signal generators and power supplies, • Comfortable producing test instructions, specifications and technical reports Desirable (not essential) • RF / Microwave exposure at sub-system level, • Experience with automated test equipment (ATE), • Environmental or high-voltage testing awareness, • Defence or regulated manufacturing experience, • SAP exposure Test equipment youll regularly use • Oscilloscopes, DMMs, power supplies, signal generators, • Spectrum analysers / VNAs (where applicable), • RF measurement equipment in a controlled test environment Why this role • Hands-on engineering real faults, real test equipment, • Stable, long-term defence programmes, • Supportive engineering team, • Clear processes and production support (not firefighting) What happens now?Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance:British Citizen or a Dual UK national with British citizenshipRestrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role:For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. JBRP1_UKTJ

CNC Machinist Programmer A skilled CNC Machinist Programmer is required for an aerospace precision engineering role involving programming, setting and operating CNC machinery to produce high-quality components. If youve also worked in the following roles, wed also like to hear from you: CNC Setter, CNC Operator, CNC Programmer, Machinist, Precision Engineer DAY & NIGHT SHIFTS AVAILABLE SALARY: Day Shift: £15.50 per Hour / Night Shift: £20.15 per Hour + Overtime (at Time and a Half) + Benefits LOCATION: Preston, Lancashire, North West England JOB TYPE: Full-Time, Permanent WORKING HOURS: 38 Hours per Week JOB OVERVIEW As the company continues to grow, they are looking for an experienced CNC Machinist Programmer to join their skilled and dedicated manufacturing team. Working within an established aerospace and precision engineering environment, the CNC Machinist Programmer will programme, set and operate CNC machines while maintaining excellent quality assurance, safety and production standards. This is a great opportunity for a CNC Machinist Programmer who takes pride in high-quality workmanship, enjoys solving technical challenges and wants to build a stable, long-term career using advanced machining technology. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the CNC Machinist Programmer include: • CNC Programming: Programme and set CNC machine tools using company production and process documentation, • Machine Setting: Set up and operate CNC machines to produce precision-engineered aerospace components, • Technical Drawings: Read and interpret engineering drawings and technical specifications, • Quality Inspection: Carry out first-off inspections and self-inspection activities to ensure products meet technical requirements, • Documentation: Complete production and quality documentation accurately, • Production Support: Support production planning activities to maximise machine utilisation and efficiency, • Material Handling: Operate FLT and overhead crane equipment to load and unload materials, • Machine Maintenance: Perform routine machine maintenance and maintain high housekeeping standards, • Health and Safety: Ensure compliance with Health and Safety procedures and company policies CANDIDATE REQUIREMENTS ESSENTIAL • CNC Machining Experience: Previous experience operating and setting CNC machines within a manufacturing or precision engineering environment, • Multi-Axis Knowledge: Experience working with 3, 4 and 5-axis CNC machines, • Controls Experience: Experience using Heidenhain controls, • Engineering Drawings: Ability to read and interpret complex engineering drawings and technical specifications, • Quality Focus: Strong attention to detail and a commitment to producing accurate, high-quality work, • Problem Solving: Good problem-solving skills with the ability to work through technical challenges, • Teamwork: Good communication skills and the ability to work effectively within a team environment, • Qualifications: Recognised engineering apprenticeship with a minimum City and Guilds or NVQ qualification in Mechanical Engineering DESIRABLE • HNC Qualification: HNC qualification or equivalent engineering training, • Aerospace Background: Experience within aerospace manufacturing or a highly regulated precision engineering environment, • Continuous Improvement: Proactive approach with the confidence to contribute ideas and support improvements BENEFITS • Enhanced rate for night shift working, • Overtime paid at time and a half, • Life Assurance, • Free onsite parking, • A stable, long-term career opportunity within a respected aerospace engineering business, • Supportive leadership and opportunities to contribute ideas and drive improvements, • A collaborative working environment where experience, initiative, and continuous improvement are valued, • The chance to work on high-precision aerospace projects using advanced machining technology HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CVs of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14799 Full-Time, Permanent Engineering / Manufacturing Jobs, Careers and Vacancies. Find a new job and work in Preston, Lancashire, North West England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. AWD-IN-SPJ JBRP1_UKTJ

Shift Team Leader – Energy from Waste Competitive salary + shift allowance + benefits Essex SCINERGY Recruitment are recruiting for a Shift Team Leader to join EFW power station In Essex. The Shift Team Leader role involves directing and managing the shift team effectively to ensure the site meets its operational targets in a safe and efficient manner. The role will involve: • Leading and coordinating all day-to-day production and operational activities to ensure safe, efficient, and compliant plant performance, • Supervising and developing Deputy STLs and Outside Operators ensuring adequate resourcing, training, and competency at all times, • Managing site safety systems, including permit to work, and driving a strong safety-first culture across all operations, • Controlling plant operations within design parameters to maximise availability, performance, and output, • Coordinating closely with maintenance and external contractors to plan and execute work with minimal disruption to operations, • Ensuring full compliance with environmental, regulatory, and licence requirements, including emissions and operational standards To be considered for this role, you should have: • Proven experience at Lead Operator / Shift Team Leader / Shift Manager level or similar in the power generation sector – EFW, biomass, coal, CCGT, CHP, • A technical engineering qualification would be preferred e.g. ONC/NVQ/City & Guilds, • Strong understanding of safe systems of work and permit-to-work procedures, • Strong experience of DCS / SCADA operations, • A methodical, safety-first mindset with strong problem-solving ability What's on offer: • Competitive salary + a shift allowance, • Company pension, • Death in service, • 25 days holiday + BH and birthday off, • Performance-related bonus, • Ongoing training and development For further information or to apply, please contact Steve Utton or Callum Sheppard at SCINERGY Recruitment on 07441 955 902 or email JBRP1_UKTJ

E&I Approved Supervisor Location: Liverpool Type: Permanent About the Role An exciting opportunity has arisen for an experienced E&I Approved Supervisor to join a specialist engineering organisation supporting critical gas infrastructure projects across the UK. This role is ideally suited to a highly competent Electrical & Instrumentation professional with extensive experience within the gas transmission and distribution sector. You will be responsible for supervising and undertaking electrical installation, maintenance, inspection, testing, commissioning and fault-finding activities on operational gas sites and hazardous area installations, ensuring the highest standards of safety, compliance and technical excellence are maintained at all times. Key Responsibilities Electrical & Instrumentation Activities Supervise and undertake Electrical & Instrumentation installation activities on operational gas infrastructure sites. Carry out electrical installation, maintenance, inspection and testing activities within hazardous area environments. Install, commission and maintain electrical and instrumentation systems associated with gas transmission and distribution assets. Conduct fault finding, diagnostics and corrective maintenance activities on electrical and instrumentation equipment. Support commissioning and energisation activities as required. Perform electrical isolations and ensure safe systems of work are maintained throughout all activities.Inspection, Testing & Compliance Conduct initial verification, periodic inspection and testing of electrical installations, including Ex and Intrinsically Safe (IS) systems. Ensure all works comply with current electrical regulations, hazardous area requirements and company procedures. Maintain compliance with Permit to Work (PTW) systems and operational site requirements. Complete inspection reports, maintenance records and technical documentation. Monitor quality standards and ensure all work is completed in accordance with project specifications and industry best practice.Site Supervision Supervise electrical activities and provide technical guidance to site personnel and subcontractors. Ensure works are completed safely, efficiently and to the required quality standards. Review, interpret, update and red-line electrical drawings and technical documentation. Coordinate site activities with project teams, operational personnel and stakeholders. Support project delivery through effective planning, communication and problem solving.Health, Safety & Environmental Promote and maintain a strong safety culture across all project activities. Conduct risk assessments and ensure compliance with approved method statements. Identify and report hazards, near misses and safety concerns. Ensure compliance with ATEX/DSEAR requirements and hazardous area working practices. Participate in safety briefings, toolbox talks and site audits where required.Essential Experience Minimum 10 years' experience within Electrical & Instrumentation roles. Significant experience working within the gas transmission and distribution industry. Proven experience on major utility and gas infrastructure projects. Extensive knowledge of hazardous area electrical installations. Experience carrying out electrical inspection, testing and verification activities. Strong background in commissioning, maintenance and fault diagnosis. Experience working under Permit to Work systems and safe systems of work. Ability to work independently and supervise electrical activities on operational sites. Experience working within highly regulated industrial environments. Essential Qualifications & Certifications Time Served Electrician. City & Guilds 236 Part 1 & Part 2 Electrical Installation (or equivalent). City & Guilds 2382 – 18th Edition Wiring Regulations. City & Guilds 2377 Inspection & Testing of Electrical Equipment. CompEx Ex01–04 Certification. CompEx Ex05 & Ex06 (Dust). Energy & Utility Skills Register (EUSR). SCO Core. SCO91. Relevant utility client competency authorisations. Desirable Qualifications PASMA. HSG47 Utility Avoidance Training. First Aid at Work or Emergency First Aid at Work. Additional gas industry competencies and network operator authorisations. Instrumentation calibration and commissioning experience. Supervisory or leadership qualifications. Technical Competencies Hazardous Area (ATEX/DSEAR) installations. Intrinsically Safe (IS) systems. Electrical inspection and testing. Commissioning and maintenance activities. Industrial electrical installations. Gas transmission and distribution infrastructure. Electrical fault finding and diagnostics. Technical documentation and reporting. Risk assessments and method statement review. Permit to Work systems. Electrical isolation procedures. Instrumentation systems and field devices. If this job is of interest, please don't hesitate to contact Matt Kidd on LinkedIn. Millbank Holdings Ltd is an equal opportunities employer committed to creating an inclusive and diverse workforce. We welcome applications from all suitably qualified individuals, regardless of background, and encourage candidates from underrepresented groups to apply. We are proud to be a member of the Disability Confident Scheme, and we are committed to ensuring an accessible and supportive recruitment process for everyone. If you require any adjustments at any stage, please let us know and we’ll do our best to accommodate. Millbank operates as both an Employment Agency and an Employment Business

CNC Setter/Operator-Days Liverpool (L24)-Commutable from Liverpool, Widnes, Runcorn, St Helens, Warrington Excellent Salary plus shift allowance plus Benefits plus overtime plus equivalent to 25 days leave 3 x 12 hours per week, 05:55-17:40 Are you a CNC Setter Operator with experience using Fanuc controlled CNC lathes? Are you looking for a days based role with shift allowance, job security, training, and working 3 days a week? You can earn an excellent salary for just 3 shifts a week with no nights or Sunday work in an excellent working environment. This equates to over £20.50/hour. This is an excellent opportunity to work on a shift position, in a modern clean environment with the opportunity for further training (milling and possibly turn/mill machines) and career /salary development. The company are a market leading bespoke pharmaceutical manufacturer with a global presence and full order books. The company pride themselves on their high tech, clean and staff friendly environment,. The Role: Permanent, full time position, working day shifts, 3 x 12 hours per week. No Sunday work, alternative Saturdays. Setting and operating of Fanuc controlled CNC lathes and then once trained move onto Milling as well Working with Stainless steels and alloys The Person: Working experience in a manufacturing environment Experience setting and operating Fanuc controlled CNC lathes Any CNC Milling experience preferred but not essential Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Nick Smith at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Electrical & Instrumentation (E&I) Approved Supervisor GPW are working with a leading engineering and utilities contractor who are looking to recruit an experienced Electrical & Instrumentation (E&I) Approved Supervisor to join their team. The business delivers critical work across gas transmission and industrial sites and offers long-term, high-value project exposure. Role Overview: • Supervise and carry out Electrical & Instrumentation installation, commissioning, maintenance, inspection, and testing activities on operational gas sites, • Work within hazardous area environments (ATEX/DSEAR), including Ex & IS systems, ensuring compliance with all safety and regulatory requirements, • Perform fault finding, diagnostics, and corrective actions, while reading, interpreting, and updating electrical drawings and technical documentation, • Carry out isolations, risk assessments, and work within Permit to Work (PTW) systems, maintaining accurate reports, inspection records, and documentation, • Liaise with clients, site teams, and project stakeholders, while identifying and reporting hazards, near misses, and safety concerns Requirements: • Minimum 10 years’ experience within Electrical & Instrumentation roles, ideally within gas transmission and distribution, • Experience working on major utility or gas network operator sites with strong knowledge of hazardous area installations, • Proven background in inspection, testing, commissioning, maintenance, and fault finding, • Ability to work independently, supervise on-site activities, and operate within Permit to Work systems Qualifications & Certifications: • Time Served Electrician with City & Guilds 236 Part 1 & 2 and 18th Edition (C&G 2382), • Inspection & Testing (C&G 2377), • CompEx Ex01–04 plus Ex05 & Ex06 (Dust), • EUSR, SCO Core & SCO91, plus relevant client competency authorisations Desirable: • PASMA, HSG47, and First Aid (FAW / EFAW), • Additional utility competencies or instrumentation calibration and commissioning experience The Ideal Candidate: • Strong focus on safety, compliance, and quality workmanship, • Organised, communicative, and self-motivated with a methodical approach to problem-solving, • Flexible across maintenance, project, and commissioning environments, with the ability to lead and maintain high standards

Ready to find the right role for you? Salary: Competitive salary plus a 15% annual bonus and Veolia benefits Grade: 5.1 Hours: 40 hours per week Location: Liverpool Merseyside L19 8EG When you see the world as we do, you see the chance to help the world take better care of its resources and help it become a better place for everyone. As a Day Operations Supervisor you'll be pushing for innovative solutions to create a more sustainable future for all. We know that everyone here at Veolia can help us work alongside our communities, look after the environment, and contribute to our inclusive culture. What we can offer you; 25 days of annual leave plus bank holidays Access to our company/people's pension scheme Discounts on everything from groceries to well known retailers Access to a range of resources to support your physical, mental and financial health; so you can lean on us whenever you need to 24 hour access to a virtual GP, 365 days a year, for you and family members in your household One paid days leave every year to volunteer and support your community Ongoing training and development opportunities, allowing you to reach your full potential What you'll be doing; Lead the day-shift yard operation, overseeing all day-to-day activities to ensure safe, efficient and compliant delivery of the production plan. Line manage Day Operatives and the Senior Day Operative, providing clear direction, coaching, performance management and regular 1:1s. Plan daily operations using the production plan, daily plan list, tank farm levels, tanker hire requirements and drum/IBC stock levels. Run daily team briefings to communicate priorities, targets, operational risks and key safety messages. Coordinate tanker loading/offloading and manage site traffic movements in collaboration with the Weighbridge Operator. Oversee drum and IBC management, including screening loads prior to dispatch and verifying product/specification compliance. Maintain drum and IBC stock control to ensure operational continuity and minimise disruption. Ensure all work is completed in line with SOPs, risk assessments and company policies. Complete, log and close out daily monitoring checklists (including housekeeping standards) and ensure timely completion of actions. Lead weekly site safety checks, accurately record findings and drive completion of follow-up actions. Liaise with site maintenance and raise/report issues via HxGN/AVA, supporting planning of maintenance tasks and site availability. Identify opportunities to reduce waste generation from day operations and contribute to continuous improvement and KPI delivery. Escalate significant operational, safety or quality risks promptly and provide structured recommendations on resourcing, training and yard improvements. What we're looking for; Proven supervisory/team leader experience in a manufacturing, chemical, logistics or similar operational environment. Demonstrable experience in yard operations, tanker handling, drum/IBC management or comparable material movement activities. Bulk liquid operations experience. Strong working knowledge of health & safety regulations, safe systems of work and operational best practice. Competent planning and organisation skills (daily planning plus short-term lookahead for logistics, absence cover and major site activities). Confident communicator with the ability to deliver effective briefings, delegate clearly and produce accurate operational documentation. Strong coaching style with the ability to develop competence, build morale and lead by example. IT proficient, with experience using systems such as Google Docs and operational platforms (e.g., Workday, AVA, HxGN). FLT licence (essential). Desirable: Experience writing SOPs and risk assessments. Formal training/assessment qualification. Relevant technical or operational qualifications. What's next? Apply today, so we can make a difference for generations to come. We're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. We're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. We're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive. If you are successful in securing a new role or promotion within the company, any offer to you may be subject to the acceptance of standardised terms and conditions. These new terms and conditions may differ from your current contract, if you have any questions about how this might affect you, please don't hesitate to contact your line manager or the HR team. Job Posting End Date: What's next? Apply today, so we can make a difference for generations to come. We're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. We're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. We're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive

Electrical Approved Supervisor Location: Liverpool Type: Permanent About the Role An exciting opportunity has arisen for an Electrical Approved Supervisor to join a specialist engineering organisation delivering Electrical & Instrumentation projects across gas transmission and distribution infrastructure, hazardous area installations, and industrial environments. This position is ideally suited to an experienced E&I professional with a strong electrical background, extensive gas industry experience, and proven supervisory capabilities. You will be responsible for leading site teams, ensuring safe delivery of installation and maintenance activities, and maintaining the highest standards of quality, compliance, and operational excellence across critical infrastructure projects. Key Responsibilities Site Supervision & Project Delivery Supervise and undertake Electrical & Instrumentation installation activities on operational gas and industrial sites. Lead site teams and subcontractors to ensure works are delivered safely, efficiently, and in accordance with project requirements. Coordinate site activities to minimise disruption to operational facilities. Monitor progress, quality, and productivity across multiple work fronts. Support project managers with planning, resource allocation, and delivery activities.Electrical & Instrumentation Installation Carry out and supervise electrical rewires, upgrades, modifications, and new installations. Install and maintain electrical and instrumentation systems within hazardous area environments. Support commissioning, testing, energisation, and handover activities. Ensure all installation work complies with current regulations, standards, and specifications. Identify and resolve technical issues encountered during project delivery.Health, Safety & Compliance Promote and maintain a positive safety culture across all site activities. Ensure compliance with Permit to Work (PTW) systems, site rules, and safe systems of work. Review and implement Risk Assessments and Method Statements (RAMS). Conduct site safety briefings and toolbox talks. Report hazards, near misses, and safety observations in accordance with company procedures. Ensure compliance with ATEX/DSEAR requirements and hazardous area working practices.Technical & Quality Assurance Interpret, review, and red-line electrical drawings and technical documentation. Monitor workmanship standards and ensure quality requirements are achieved. Carry out inspections and support testing activities where required. Maintain accurate site records, progress reports, and completion documentation. Liaise with engineering teams to ensure technical queries are resolved efficiently.Stakeholder Management Act as a key interface between site teams, project management, clients, and operational stakeholders. Attend site meetings and provide updates on project progress and site activities. Coordinate with operational personnel to ensure safe execution of works on live assets. Build and maintain strong working relationships with clients and contractors.Essential Experience Proven experience supervising Electrical & Instrumentation installation activities. Significant experience working within gas transmission and distribution environments. Experience on operational utility and hazardous area sites. Strong understanding of industrial electrical systems and installation practices. Experience working under Permit to Work systems and strict site safety procedures. Demonstrable ability to manage multiple work activities while maintaining high safety and quality standards. Experience within industrial, utilities, petrochemical, pharmaceutical, energy, or commercial sectors.Essential Qualifications & Certifications City & Guilds 2382 – 18th Edition Wiring Regulations. City & Guilds 2391 Inspection & Testing. BTEC Level 3 Diploma in Operations & Maintenance Engineering (or equivalent). CompEx Ex01-04 Certification. SCO Core. SCO91 Competent Person. EUSR Registration. SMSTS. EL6 Authorisation.Desirable Qualifications & Authorisations EL96 LV Authorisation. Authorised Person Electrical (APE) status. Additional gas industry competencies and network operator authorisations. First Aid at Work. Temporary Works or additional supervisory qualifications.Technical Competencies Electrical & Instrumentation installations. Hazardous Area (ATEX/DSEAR) environments. Electrical inspection and testing. Industrial electrical systems. Gas transmission and distribution infrastructure. Drawing interpretation and red-line mark-ups. Contractor and site supervision. Permit to Work systems. Risk assessments and method statements. Health, Safety & Environmental compliance.Personal Attributes Strong leadership and supervisory skills. Excellent communication and stakeholder management abilities. Commitment to safety, quality, and compliance. Ability to work effectively under pressure in operational environments. Strong organisational and planning skills. Proactive approach to problem solving and decision making. High attention to detail and commitment to delivering work to a high standard.What's on Offer Opportunity to work on critical gas infrastructure projects across the UK. Long-term career development within a growing engineering organisation. Exposure to major utility and industrial projects. Competitive salary and benefits package. Supportive and collaborative working environment. Opportunity to play a key role in the safe delivery of essential energy infrastructure. If this job is of interest, please don't hesitate to contact Matt Kidd on LinkedIn. Millbank Holdings Ltd is an equal opportunities employer committed to creating an inclusive and diverse workforce. We welcome applications from all suitably qualified individuals, regardless of background, and encourage candidates from underrepresented groups to apply. We are proud to be a member of the Disability Confident Scheme, and we are committed to ensuring an accessible and supportive recruitment process for everyone. If you require any adjustments at any stage, please let us know and we’ll do our best to accommodate. Millbank operates as both an Employment Agency and an Employment Business

CNC/Manual Grinder £30,000 - £33,000 + Half Day Friday + Excellent Company Benefits Kirkby, Merseyside An excellent opportunity for someone with CNC/manual grinding experience, looking to work in a technical engineering environment in a varied role offering Mon-Fri days based working hours and a comprehensive benefits package. This is a great chance to work for a highly established, multinational business that holds a great reputation within its industry. The role is for an engineering company that supports customers across a range of industries. Your role will be to manage the operation and running of specialist machinery, operating a range of grinding and manual finishing machines including cylindrical grinding, surface grinding, lapping and honing. You will receive industry specific training and will be working as part of a collaborative team. The role would suit someone who has some CNC/manual grinding machinery experience, looking for Mon-Fri working hours with a great benefits package. The Role: - Operate specialist CNC/manual machinery within an engineering environment. - Work as part of a team to ensure production runs smoothly. - Mon-Fri days-based role with a 12:30pm Friday finish The Candidate: - CNC/manual grinding machinery experience - Looking for a mon-fri role with development and a comprehensive benefits package. Manual grinder, CNC grinder, CNC, Manual machinist, machinist, Machine Operator, Production Operative, Machine Operative, Machinery, Production, engineering, manufacturing, Kirkby, Knowsley, Liverpool, St Helens, Merseyside, North West Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK

Operator to work on an Anaerobic Digestion plant based in Inverness. As the Operator, you will be responsible for:.

Proactive Technical Limited is seeking Machine Operators in Bedford to operate production machinery safely and efficiently.

EDM Operative to work at their facility based near Burnley.Participate in a positive and proactive EHS culture across the site.Perform EDM operations using a variety of different machines - including wiring, sinking and deep hole dril.

Proactive Technical Limited is seeking Assembly Operators for immediate starts in Luton.

As a Senior Care Assistant at a Barchester care home, you'll look after the different needs of our residents to enable us to deliver quality, person-centred care and support.Your role will involve supervising and inspiring a team of dedicated Care Assistants alongside the Deputy General Manager.You

Become a Self-Employed Delivery Driver with Evri and Start Earning This Summer.Looking to boost your income over the summer months? Whether you're saving for a holiday, covering extra expenses, or just want more cash in your pocket, now’s the perfect time to get started.Join Evri as a self-employe

As a Kitchen Assistant at a Barchester care home, you'll help to provide the first-class food and hospitality that enable us to give our residents exceptional all-round care and support.A healthy, nutritious diet is vital to ensuring our residents' wellbeing and helping them enjoy daily life with us

Become a Self-Employed Delivery Driver with Evri and Start Earning This Summer.Looking to boost your income over the summer months? Whether you're saving for a holiday, covering extra expenses, or just want more cash in your pocket, now’s the perfect time to get started.Join Evri as a self-employe

Full-time | Part-time | Temporary (Ongoing).MedGen Healthcare is seeking compassionate, resilient, and dedicated.Mental Health Healthcare Assistants.This role involves supporting children and adolescents with conditions such as.Autism Spectrum Disorder (ASD), ADHD, emotional and behavioural difficul

Become a Self-Employed Delivery Driver with Evri and Start Earning This Summer.Looking to boost your income over the summer months? Whether you're saving for a holiday, covering extra expenses, or just want more cash in your pocket, now’s the perfect time to get started.Join Evri as a self-employe

Superior Healthcare are recruiting a.Community Complex Support Worker.Experience in complex care is essential.We are looking for someone calm, gentle and confident who can provide consistent, reassuring support.WEB:e6fecb42-6c45-416e-8da8-2fed5b3f90e3-6" data-testid="conversation-turn-14" data-scrol

Become a Self-Employed Delivery Driver with Evri and Start Earning This Summer.Looking to boost your income over the summer months? Whether you're saving for a holiday, covering extra expenses, or just want more cash in your pocket, now’s the perfect time to get started.Join Evri as a self-employe

Early Morning Delivery Drivers Needed!.Join News Team Group, a fast-growing company delivering newspapers and magazines to homes and businesses across the UK.Were looking for reliable, self-employed delivery drivers who are ready to hit the road and make an impact in their local community.Join a tea

We are recruiting Relief Support Workers for our supported living services in Toxteth, Netherley and the City Centre, providing support to people with mental health needs.We are looking for a motivated and warm individual to provide person-centred care and support at our Liverpool services.As a Reli

Helping others improve and turn their lives around – there’s no better feeling.It’s what we do for thousands of people at more than 150 sites across the UK.We are looking for a confident Care & Support Worker with a passion for delivering outstanding healthcare.You’ll be working full time�

Meridian business support is recruiting for a Production Operative for a Company based inBromborough area.Operatives, checking bottles on the line for quality issues, taking the bottles off the line and packing them onto pallets.You will then take the pallets to the warehouse area using an electric

Helping others improve and turn their lives around – there’s no better feeling.It’s what we do for thousands of people at more than 150 sites across the UK.We are looking for a confident.Old Leigh House supports men living with a learning disability and complex needs.The team can also support

A growing manufacturing business in Speke in Liverpool is looking to recruit a reliable and motivated Production Operative / FLT Driver to support day-to-day production and warehouse operations.This is a hands-on role involving manufacturing activities, forklift operation, quality checks, raw materi

Rotating shift pattern, one week day's, one week nights Monday - Thursday).We're looking for a reliable and practical Production Operative to support the compounds teams.This is a hands-on role involving setting up plant and machinery, handling raw materials, packing finished product, and maintainin

Evo Personnel are looking to recruit an experienced Machine operator.