Trabajos technician en Canvey Island - Page 2Crear alertas

One of the leading Motorsport timing and data companies in the world is currently looking for a competent and enthusiastic Event Timing/Support Technician to hit the ground running. Able to rig and de-rig the TSL timing and GPS systems at event. Previous live event operational experience.

Job Description Premier Recruitment Group has the privilege to recruit on behalf of our very prestigious client based in Basildon, Essex.We are recruiting for experienced and forward thinking Enclosure Equipment Technician.This is full time and permanent position and working for very well establish

Premier Recruitment Group has the privilege to recruit on behalf of our very prestigious client based in Basildon, Essex. We are recruiting for experienced and forward thinking Enclosure Equipment Technician . This is full time and permanent position and working for very well established company. Very interesting and varied role with a scope for progression. We are looking to appoint an Enclosure Assembly Technician to assist in the machining, manufacturing and build-up of enclosures, equipment and machinery on factory floor. The enclosure assembly role is varied and requires machining, fitting, assembly and fault finding skills. Keen attention to detail and careful handling of the specialist materials is essential. Ability to maintain focus and care when actioning the tasks of higher repetition will be essential. Duties are as follows: Preparation of base materials, machining and lock assembly. Assembling frameworks and fitting to machinery lines. Dis-assembly of tested lines and preparation of items ready for transport and assembly at customers sites Small amount of pneumatic assembly Assembly, commissioning, support and service work at customers' sites A certain amount of travel may be required to support installation to our worldwide customer base. The candidate will need to have the following skills/attributes: Good basic engineering skills Able to interpret equipment assembly drawings and maintain the high-quality finish and output levels expected by our customers. Proven team working, attention to detail and good problem solver Practical engineering experience, particularly in mechanical assembly and machining Able to operate within the requirements of good health and safety discipline. Recognised Engineering certification/apprenticeship If interested please apply or contact Tom Kurczab at Premier Recruitment Group. TPBN1_UKTJ

Enclosure Assembly Technician Mechanical Build & Fitting A respected machinery manufacturer based in Essex is seeking an enclosure assembly technician to join their growing production team. Operating from a modern headquarters and engineering facility, the company specialises in the design and assembly of automated filling and packaging lines, serving the pharmaceutical and cosmetics industries globally. This is a hands-on, workshop-based role ideal for someone with solid mechanical assembly and machining experience, good attention to detail, and a proactive approach to quality and teamwork. Key responsibilities Prepare and machine base materials for enclosure assemblies Fit locks, frames, and panels to machinery lines and equipment Carry out mechanical fitting and fault finding during assembly Disassemble completed machinery and prepare equipment for transport to site Support small-scale pneumatic assemblies where required Assist with machinery installation, commissioning, and service at customer sites Follow detailed assembly drawings to ensure high-quality workmanship Handle materials with care, particularly during repetitive or high-precision tasks Essential requirements Practical engineering or mechanical assembly experience Ability to read and interpret assembly drawings accurately Strong attention to detail and pride in delivering high-quality work Good problem-solving skills and a team-oriented attitude Awareness of health and safety best practices in a workshop environment Recognised engineering qualification or apprenticeship Whats on offer Competitive salary based on experience and qualifications Generous employee benefits package In-house training provided on bespoke machinery and equipment Opportunities for international travel to support installations and service Supportive working environment within a stable and established business Apply now If you are a practically minded engineer with strong mechanical skills and a commitment to quality, this is an excellent opportunity to join a highly regarded company building complex, high-spec equipment for global clients. Full product training provided. TPBN1_UKTJ

Job Description Premier Recruitment Group has the privilege to recruit on behalf of our very prestigious client based in Basildon, Essex.We are recruiting for experienced and forward thinking Enclosure Equipment Technician.This is full time and permanent position and working for very well establish

Job Title: Maintenance Technician Starting salary of £38k basic with the opportunity to earn up to £46k basic with additional training and experience + Company Van Full time, 37 hours, 5-day working pattern including some weekends. Permanent Location: Tilbury, Dagenham, Basildon, Chelmsford, Essex - the ideal candidate would be within a maximum of 45 minutes drive to Tilbury and to Brentwood Are you passionate about joining a fantastic team dedicated to making a positive, direct impact on the environment and the communities we serve? As a valued employee, you'll be entitled to: • Personal private health care including physiotherapy, • 24-hour Virtual GP service for you and your household, • 25 days annual leave - rising with length of service, • Competitive pension scheme - Anglian Water double-matches your contributions up to 6%, • Business use of company van plus access to tools and all uniform and PPE, • Bonus scheme, • Flexible benefits and working culture to support your wellbeing and lifestyle., • Life Assurance at 8 times your salary, • Personal Accident cover - up to 5 times your salary, • Lots of great discounts!, • Paid time off when you're physically and mentally unwell, • An excellent Family Leave package - to help you support your family including enhanced maternity, paternity, and shared parental leave policies. Build a water industry for the future Get ready to make a difference and join us as a maintenance technician, responsible for carrying out general repairs, investigating and rectifying faults and completing scheduled maintenance to ensure the reliability of our assets. This role is not just about doing a job, it has a real purpose; it's about protecting our environment. With support from a collaborative team, you will develop your commercial and/ or industrial experience with assets such as: electrical control panels, motor testing, level control equipment and instrumentation, inverters, including some small-scale domestic work. Experience working with mechanical control systems, telemetry systems, pumps, gearboxes and general mechanical/electrical plant maintenance would also be advantageous. This role is vital and will have a direct impact on the environment and communities that we serve. What does it take to be a Wastewater Maintenance Technician? To be successful in this role, you must have obtained an NVQ level 3 (mechanical/engineering) qualification (or equivalent) and/or completed a relevant apprenticeship and hold a full UK driving licence Inclusion at Anglian Water: We welcome everyone! As an equal opportunity employer, we consider all qualified applicants, no matter their gender identity, ethnicity, nationality, religion, age, sexual orientation, disability, or any other protected characteristic. We hire and nurture based on merit and a shared passion for making positive impacts. Our commitment is to foster an inclusive environment where everyone feels they belong & can use every drop of their potential Closing date: 08/09 #loveeverydrop

Job Title: Senior Operations Technician - Water Recycling Senior Operations Technician - Water Recycling Salary: Circa £42,000 depending on skills and experience and business use of company van Permanent : Full Time, 37 hours per week Location: Basildon/Southend & surrounding areas We look after our people and offer a wide range of benefits including Private health care, Virtual GP service for you and your household. Generous pension scheme - we double-match your contributions, up to 6% giving you 18% combined contribution For a great career just add water! We are looking for a Senior Operations Technician with a Mechanical or Electrical bias to join our team in Basildon/Southend. Reporting directly to the Operations Support Manager, you will work with other teams to drive continuous improvement across our Operations Work and Pumping Station Assets. You will provide technical support, expertise, and advice to deliver effective and efficient operations of Water Recycling Operations resources, processes, assets, and systems. As part of your role, you will identify, implement, and share improvements to facilitate the effective and efficient operation of the Water Recycling Operations process. You will work closely with relevant teams to deliver efficient solutions to operational issues. This will include coaching and supporting in the development and performance management of Technicians. If you have a strong mechanical or electrical background and are passionate about driving operational excellence, we want to hear from you! Key tasks include: * Develop, encourage and foster good and safe working practices and work in accordance with the Company's safety rules at all times * Lead on investigation of safety, operational and customer issues associated with Water Recycling Treatment and Pumping Station processes and liaise with relevant stakeholders to deliver the most cost-effective solution whilst balancing the needs of the customer * Manage available resource to minimise compliance or pollution incidents due to loss of service or asset failure * Assist management with completion of reports and lessons learned/storyboards following incidents to minimise business risk and ensure best practice across teams * Drive continuous improvement of process and service through implementation of new ideas/equipment * Provide expert support to monitor and coach field resources in techniques/equipment used for the service and maintenance of treatment processes and asset What does it take to be a Senior Operations Technician? * Full driving licence * Demonstrate experience and awareness of Health and Safety within an operational environment * Ability to adapt communication style (both written and verbal) to suit a wide range of internal and external stakeholders * Demonstrate customer service skills and ability to deal with customers in an empathetic and professional manner * Knowledge or understanding of wastewater systems and processes would be beneficial * In this role you must be able to work within a confined space, and at height without restrictions. Due to harness weight limits, your maximum weight cannot be in excess of 113 kilograms, and you will be expected to complete relevant occupational health checks including Hand-arm Vibration (HAV) As a valued employee, you'll be entitled to: * Personal private health care including physiotherapy * 24-hour Virtual GP service for you and your household * 25 days annual leave - rising with length of service * Competitive pension scheme - Anglian Water double-matches your contributions up to 6% * Bonus scheme * Flexible benefits and working culture to support your wellbeing and lifestyle. * Life Assurance at 8 times your salary * Personal Accident cover - up to 5 times your salary * Lots of great discounts! * Paid time off when you're physically and mentally unwell * An excellent Family Leave package - to help you support your family including enhanced maternity, paternity, and shared parental leave policies. Inclusion at Anglian Water Join us and make a difference. Our customers come from a wide range of backgrounds, and we think our workplace should reflect that. We are committed to making sure all our colleagues feel they belong and are supported to succeed. Together with our fellow water companies, we are committed to the Social Mobility Pledge; we are also a signatory to Business in the Community's Race at Work charter; we hold the Armed Forces Gold Covenant for Employers; we are an accredited Disability Confident employer, and we play a leading part in the Women's Utility Network. Closing date : 08/09 #loveeverydrop

Bennett & Game are delighted to be working with a specialist partitioning and storage solutions provider based in Basildon, Essex. Our client, a tight-knit team of dedicated professionals, specialises in designing, manufacturing, and installing innovative partitioning systems and bespoke storage solutions across the UK and Europe. They pride themselves on their excellent industry reputation, quality craftsmanship, and strong client relationships. Are you a passionate Junior CAD Technician seeking a new opportunity to join a well-established yet growing company? This is your chance to become a vital member of a small, collaborative team and contribute significantly to diverse projects within the storage and partitioning industry. Junior CAD Technician Salary & Benefits Salary: £25,000 - £30,000 (depending on experience) 20 days annual leave + Bank Holidays + Christmas Shutdown Pension Scheme Opportunities for professional growth and training Friendly, supportive team environment Immediate start available (happy to accommodate notice periods) Junior CAD Technician Job Overview Producing detailed and accurate CAD drawings for internal approval and client submissions Collaborating closely with the project management and installation teams to ensure feasibility and technical accuracy Assisting with project estimations and providing detailed technical documentation for quotations and tenders Liaising directly with clients, suppliers, and contractors to ensure designs meet client requirements and specifications Continuously updating drawings and designs as per project changes or client feedback Maintaining accurate project records and ensuring effective communication within the project lifecycle Junior CAD Technician Job Requirements Proven CAD Technician experience within the construction, storage, fit-out, or partitioning sectors preferred Proficient in AutoCAD, with additional knowledge of other design software beneficial Excellent communication and interpersonal skills to effectively liaise with clients and team members Strong organisational and project coordination skills with exceptional attention to detail Competent user of Microsoft Office (Word, Excel, Outlook) Ability to work independently as well as part of a collaborative team Full UK driving licence advantageous but not essential Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. TPBN1_UKTJ

Basildon Salary-Competitive DOE Monday-Friday -37.5 hours per week. The company: Based in South Essex, you will be joining a well-known manufacturing company which specialises in the design, manufacturing, build and installation of automated machinery working in several industries.Due to large expansion, the company is now looking for an experienced Mechanical Technician/Fitter to join and be part of their manufacturing team. Offering a range of benefits including flexi-start time, private healthcare, generous holiday allowance and more, this is an excellent time to join this fast-expanding company. Essential duties and responsibilities: Work as part of a team involved with the build of large machinery and smaller assemblies Work to specific engineering drawings & specifications Mechanical fitting & assembly Conducting trials and tests on machinery Assembly, installation, commissioning, support and service work at customers' sites This is just a summed-up list of responsibilities and other duties will be required. Skills and Experience required: Experience in a similar role within a manufacturing/engineering environment Ability to work to engineering drawings and specifications. Formal engineering qualifications Assembly experience Familiarity with automated production machinery would be beneficial. Applicants must have full UK working rights, as sponsorship is not available for this role. What you need to do now if you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk TPBN1_UKTJ

Test Technician, Basildon Test Technician jobs or Engineering Technician jobs or mechanical technician jobs. £30,00 - £40,000 salary guide plus excellent benefits including strong pension and 27 days holiday plus all bank holidays. Work at the forefront of automotive, defence, and electric vehicle system testing in a state-of-the-art R&D facility. An opportunity to join a leading, multi-disciplinary engineering team as a Test Technician within a well-equipped test facility based in Basildon. This role supports the preparation, setup, and maintenance of mechanical and environmental testing systems, contributing to high-profile projects in electric vehicles, defence, and advanced R&D sectors. This Test Technician job will suit: A hands-on Technician / Mechanical Technician / Engineering Technician who enjoys building, assembling, setting up test rigs, and supporting mechanical testing processes. You will likely hold a Level 3 or Level 4 qualification (such as BTEC, HNC, or similar) in Mechanical Engineering or have equivalent practical experience in a test/laboratory environment. Strong practical skills using hand tools, basic machine tools (pillar drills, mills, lathes), and basic measurement instruments (calipers, gauges, multimeters). Confident working both independently and in a team, with a methodical approach and a good understanding of safety procedures in a technical test environment. Any experience with environmental testing (vibration, shock, climatic), electric vehicle systems, or battery technologies is beneficial but not essential. You must hold a full UK driving licence. This Test Technician job will involve: Preparing test setups including jigs, fixtures, rigs, and instrumentation for vibration, shock, pneumatic, and hydraulic tests. Supporting engineering teams in the execution and clean-down of customer testing projects, following ISO 17025 and QHSE procedures. Carrying out maintenance and continuous improvement tasks within the facility. Assisting in solving technical challenges during test rig design or setup phases. Handling test data and documentation in accordance with company process standards. Occasional travel to other test facilities (e.g., Nuneaton) and flexible shift patterns depending on project demand (not night shift). Writing technical reports and contributing to documentation as needed. This Test Technician job is commutable from Basildon, Southend-on-Sea, Chelmsford, Brentwood, Grays, Rayleigh, Tilbury, Canvey Island, and surrounding areas across Essex . To apply please send your CV to Sam Hilton at Euro Projects Recruitment Ltd. Please note that if you are not contacted within the next ten days, your application has not been successful. This job is posted by Euro Projects Recruitment specialists in engineering and manufacturing appointments TPBN1_UKTJ

Job Title: Senior Network Technician Senior Network Technician Circa £40,000 - depending on skills and experience, plus standby and overtime payments Business use of company van Permanent - Full time, 37 hours a week Location: Basildon and surrounding areas Your benefits will include: • Personal private health care, • 25 days annual leave - rising with length of service, • Business use of company van plus access to tools and all uniform and PPE, • Competitive pension scheme - Anglian Water double-matches your contributions up to 6% (18% total), • Bonus scheme, • Flexible benefits to support your wellbeing and lifestyle., • A flexible working culture, • Life Assurance at eight times your salary, • Personal Accident cover - up to 5x your salary, • Lots of great discounts, • Paid time off when you're physically and mentally unwell, • An excellent Family Leave package - to help you support your family Embrace the Green Future with Anglian Water! Join us at Anglian Water and dive into a career that makes a real difference. As our Senior Technician focussing on Pollution and Flooding, you will be at the forefront of our mission to protect and restore our natural environment. This role is not just about doing a job it has a real purpose; it's about contributing to a sustainable future. Our natural environment is at the fore front of climate change and it's important that we protect it for our Region to flourish and for us to leave a legacy for future generations to enjoy. What will you be doing? * Support, monitor and coach field resources in sewerage system maintenance techniques to deliver excellent customer service. * Lead investigations into repeat customer and operational issues within Water Recycling Networks, coordinating with stakeholders for cost-effective solutions while prioritising customer needs. * Manage resources to minimise service disruption and pollution resulting from asset failure or service loss. * Handle severe weather incidents effectively and utilise systems to monitor asset and resource performance. * Provide operational standby cover as required What does it take to be successful in this role? * Ability to coach and support your team with a focus on preventing & managing pollution events * Ability to lead when analysing and/or supporting on pollution events * Understanding of the Water or Water recycling processes * Full UK driving licence * Flexible approach to work as this role includes management standby * When on call you must be able to work within a confined space, and at height without restrictions. Due to harness weight limits, your maximum weight cannot be in excess of 113 kilograms and you will be expected to complete relevant occupational health checks Inclusion at Anglian Water Inclusion is for everyone, and we are an equal opportunity employer, which means we'll consider all suitably qualified applicants regardless of gender identity or expression, ethnic origin, nationality, religion or beliefs, age, sexual orientation, disability status or any other protected characteristic. We recruit and develop our people based on merit and their passion for creating better outcomes, and we're committed to creating an environment where all our colleagues feel they belong. Closing date: 31/08 Interviews: Monday 8th & Tuesday 9th of September #loveeverydrop

Bennett & Game are delighted to be working with a specialist partitioning and storage solutions provider based in Basildon, Essex. Our client, a tight-knit team of dedicated professionals, specialises in designing, manufacturing, and installing innovative partitioning systems and bespoke storage solutions across the UK and Europe. They pride themselves on their excellent industry reputation, quality craftsmanship, and strong client relationships. Are you an experienced CAD Technician seeking a new opportunity to join a well-established yet growing company? This is your chance to become a vital member of a small, collaborative team and contribute significantly to diverse projects within the storage and partitioning industry. CAD Technician Salary & Benefits Salary: £30,000 - £35,000 (depending on experience) 20 days annual leave + Bank Holidays + Christmas Shutdown Pension Scheme Opportunities for professional growth and training Friendly, supportive team environment Immediate start available (happy to accommodate notice periods) CAD Technician Job Overview Producing detailed and accurate CAD drawings for internal approval and client submissions Collaborating closely with the project management and installation teams to ensure feasibility and technical accuracy Assisting with project estimations and providing detailed technical documentation for quotations and tenders Liaising directly with clients, suppliers, and contractors to ensure designs meet client requirements and specifications Continuously updating drawings and designs as per project changes or client feedback Maintaining accurate project records and ensuring effective communication within the project lifecycle CAD Technician Job Requirements Proven CAD Technician experience within the construction, storage, fit-out, or partitioning sectors preferred Proficient in AutoCAD, with additional knowledge of other design software beneficial Excellent communication and interpersonal skills to effectively liaise with clients and team members Strong organisational and project coordination skills with exceptional attention to detail Competent user of Microsoft Office (Word, Excel, Outlook) Ability to work independently as well as part of a collaborative team Full UK driving licence advantageous but not essential Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. TPBN1_UKTJ

An NVQ level 3 electrical qualification (or equivalent), 18th Edition electrical City & Guilds level 3or equivalent. You will have demonstrable experience in completing inspections, maintenance and fault diagnosis, being competent undertaking repairs to large pumps, actuated valves, VSD and 3-phase

Are you a qualified Electrical or Mechanical Technician with hands-on experience in complex estates plant? Join our Estates Engineering Team and play a pivotal role keeping our Trust’s critical services running 24/7. Recognised Electrical or Mechanical Technician qualification. The chance to make

Electrical Technician (Aerospace) Take the next step in your career now, scroll down to read the full role description and make your application. £33,000 - £35,000 + Generous Annual Leave + Salary Exchange Pension Scheme + Life Assurance + Pay and Role Progression + Extensive Training + Monday to Friday + Employee Cash Plan Southend-on-Sea Are you an Electrical Technician or similar from the aviation industry, looking to secure a new role that will provide excellent training and progression opportunities? Are y... JBLK1_UKTJ

As a Civil Engineering Technician, you will support the delivery of civil engineering services across a variety of projects, including residential, educational, and healthcare developments. A multi-disciplinary engineering consultancy based in Braintree, Essex is seeking an experienced Civil Enginee

Other companies may call this role Machine Operator, Production Technician, Slitting Machine Operator, Production Machine Operative, Machine Setter, Manufacturing Technician, or Production Operator. So, if you’re looking to expand your skillset as a Machine Operator, please apply via the button sh

Candidates with the relevant experience or job titles of; VMWare, Microsoft Servers, Senior IT Technical Support, IT Systems Engineer, IT Systems Technician, Infrastructure Engineer, Senior IT Engineer, 3rd Line Support Engineer, Senior Network Support, Server Support Technician will also be conside

The Motorsport Competence Group is looking for motivated and flexible Composites Technician at our headquarters in St. Ingbert / Germany. Are you looking for a new challenge and want to contribute your skills to our team? We offer you a permanent position in a positive and performance oriented working environment with diverse tasks, performance-related compensation, flexible working hours, flat hierarchies and the possibility of further development. Key responsibilities: Independent maintenance and repair of CFRP/carbon components on race cars Manufacturing, processing, and finishing of fiber composite parts according to technical specifications Performing structural analysis and assessing damaged components on-site (e.g. after accidents) Applying processes such as laminating, vacuum technology, curing, sanding, bonding Documenting all work and repairs carried out in accordance with internal quality standards Preparing spare parts and structured storage management in the area of carbon components Close collaboration with engineering, crew chief, and mechanics to ensure operational readiness Continuous improvement of workflows in the Composite Repair & Production department Qualifications: Careful, precise, and quality-oriented Passionate about technology and motorsport A team player, flexible, resilient Works independently – while reliably fitting into the team structure Communicative, open to development and new materials Ideally completed vocational training in composite materials, automotive engineering, plastics technology, or similar Experience in handling carbon / CFRP (e.g. motorsport, aviation, yacht building) Knowledge in laminating techniques, vacuum infusion, prepreg processing Confident in reading technical drawings, material lists, and production specifications Experience in motorsport environments (e.g. GT3, DTM, endurance racing) is an advantage Basic understanding of technical correlations around vehicle construction Why Rowe Racing? Your Workday: Exciting and varied tasks in an internationally operating and dynamically growing motorsport team. Diversity: Gain valuable insights into various areas of the company, connect with inspiring colleagues, and work on a wide range of engaging topics. Team: High-performing, appreciative, reliable, and passionate about motorsports. Work in a motivated team and achieve great things together. Mindset: Collaboration at eye level, flat hierarchies and short decision-making processes, open doors, a first-name culture, and mutual respect. Our Commitment: Attractive compensation, flexible working hours, and tailored opportunities for personal and professional development. Social Benefits: A permanent employment contract. We look forward to receiving your complete application, stating your salary expectations and your earliest possible starting date. Please send us your application by e-mail in pdf-format. Motorsport Competence Group Poensgen und Pfahler Strasse 14 66386 St. Ingbert Deutschland Die Motorsport Competence Group (Team Rowe Racing) sucht einen motivierten und flexiblen Carbontechniker für unser Headquarter in St. Ingbert, Deutschland. Du bist auf der Suche nach einer neuen Herausforderung und möchtest deine Fähigkeiten in unser Team einbringen? Wir bieten dir eine unbefristete Stelle in einem positiven, leistungsorientierten Arbeitsumfeld mit vielfältigen Aufgaben, leistungsbezogener Vergütung, flexiblen Arbeitszeiten, flachen Hierarchien und Entwicklungsmöglichkeiten. Aufgaben: Eigenverantwortliche Instandsetzung und Reparatur von CFK-/Carbonkomponenten an Rennfahrzeugen Herstellung, Bearbeitung und Finish von Faserverbundteilen nach technischen Vorgaben Durchführung von Strukturanalysen und Beurteilung beschädigter Bauteile vor Ort (z. B. nach Unfällen) Anwendung von Verfahren wie Laminieren, Vakuumtechnologie, Aushärtung, Schleifen, Kleben Dokumentation aller durchgeführten Arbeiten und Reparaturen nach internen Qualitätsstandards Vorbereitung von Ersatzteilen sowie strukturierte Lagerhaltung im Bereich Carbonteile Enge Zusammenarbeit mit Engineering, Crew Chief und Mechanikern zur Sicherstellung der Einsatzfähigkeit Kontinuierliche Verbesserung der Arbeitsabläufe im Bereich Composite Repair & Production Profil: Sorgfältig, präzise und qualitätsorientiert Leidenschaftlich für Technik & Motorsport Teamfähig, flexibel, belastbar Selbstständig arbeitend – gleichzeitig zuverlässig im Teamgefüge Kommunikativ, offen für Weiterentwicklung und neue Werkstoffe Idealerweise abgeschlossene Ausbildung im Bereich Verbundwerkstoffe, Fahrzeugtechnik, Kunststofftechnik oder vergleichbar Erfahrung in der Verarbeitung von Carbon / CFK (z. B. Motorsport, Luftfahrt, Yachtbau) Kenntnisse im Umgang mit Laminiertechniken, Vakuuminfusion, Prepreg-Verarbeitung Sicherer Umgang mit technischen Zeichnungen, Materiallisten und Fertigungsvorgaben Erfahrung im Motorsportumfeld (z. B. GT3, DTM, Langstrecke) von Vorteil Grundverständnis für technische Zusammenhänge rund um Fahrzeugaufbau Warum Rowe Racing? Dein Arbeitsalltag: Spannende und abwechslungsreiche Aufgaben in einem international und dynamisch wachsenden Motorsport Team Vielfalt: Du bekommst wertvolle Einblick in zahlreiche Bereiche des Unternehmens, lernst inspirierende Kollegen kennen und beschäftigst Dich mit abwechslungsreichen Themen Team: Leistungsstark, wertschätzend, verlässlich und sportbegeistert. Arbeite in einem motivierten Team und bewege gemeinsam Großes Mindset: Zusammenarbeit auf Augenhöhe, flache Hierarchien und kurze Entscheidungswege, Offene Türen, Duz-Kultur sowie Respekt Unser Versprechen: Attraktive Vergütung, zeitliche Flexibilität sowie individuelle Angebote zur persönlichen und fachlichen Weiterentwicklung Soziales: Einen unbefristeten Arbeitsvertrag Wir freuen uns auf deine vollständige Bewerbung unter Angabe deiner Gehaltsvorstellung sowie des frühestmöglichen Eintrittstermins. Bitte sende deine Bewerbungsunterlagen im PDF-Format. Motorsport Competence Group Poensgen und Pfahler Strasse 14 66386 St. Ingbert Deutschland

City and Guilds or NVQ Automotive Servicing and Repair Level 3. For further details on this role and other jobs in the motor trade, please submit your CV to Stacey Hunt of ACS Automotive Recruitment Consultancy.

This job is posted by Euro Projects Recruitment specialists in engineering and manufacturing appointments. This role supports the preparation, setup, and maintenance of mechanical and environmental testing systems, contributing to high-profile projects in electric vehicles, defence, and advanced R&D

As a Vehicle Technician you are responsible for the maintenance and repair of our vehicles to ensure they are safe and legally compliant for our customers to hire. With over 60 branches nationwide, Northgate Vehicle Hire are the UK’s go-to provider of light commercial vehicle rental solutions, par

The Data Centre Technician is responsible for ensuring all activities carried out in the Data Centre & Access Centres conform to Data Centre Procedures and industry best practice. The Data Centre Technician is responsible for ensuring all activities carried out in the Data Centre & Access Centres co

With over 60 branches nationwide, Northgate Vehicle Hire is a leading provider of light commercial vehicle rental solutions, partnering with major organizations across the UK. As a Vehicle Technician, you will be responsible for maintaining and repairing our vehicles to ensure safety and legal compl

This is a full-time on-site role for an Automotive Technician located in Basildon. The Automotive Technician will be responsible for performing routine vehicle maintenance, such as oil changes to major services. Daily tasks will include diagnosing and repairing automotive issues, maintaining service

We are looking to recruit a multi-skilled technician to work in the Southend-on-Sea area.

As a Nail technician, you will be responsible for providing a high standard of nail services to our clients and ensuring they leave our salon feeling satisfied and confident. We are seeking a skilled Nail Technician to join our team.

Candidates with the relevant experience or job titles of; VMWare, Microsoft Servers, Senior IT Technical Support, IT Systems Engineer, IT Systems Technician, Infrastructure Engineer, Senior IT Engineer, 3rd Line Support Engineer, Senior Network Support, Server Support Technician will also be conside

Bennett & Game are delighted to be working with a specialist partitioning and storage solutions provider based in Basildon, Essex. Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment age

You will liaise with service contractors, including arranging access to specific areas and shutdowns of essential plant and systems, to facilitate ongoing maintenance, respond to breakdowns, and enable repairs. Our ambition is to deliver excellent local and specialist services to improve the health

Our client requires an experienced Pharmacy Technician with technical services / dispensing chemotherapy experience to start as soon as possible.

Our client is an established accident and repair centre and is currently recruiting for a Mobile Vehicle Smart Repair Technician to cover the South Essex area. Experience in car body repairs (ideally mobile smart repair) is required. As a Mobile Vehicle Smart Repair Technician, you will be repairing

They will effectively communicate with all levels of Trust Staff in regard to maintenance and repair arrangements and schedules in order to underpin the smooth and efficient running of the Trust and maintain continuity of care to patients. Mid and South Essex NHS Foundation Trust is the only acute h

Here at Direct Line Group Auto Services, we genuinely care about what we do and aim to provide a phenomenal level of service for our customers. Direct Line Group is an equal opportunity employer, and we think diversity of background and thinking is a big strength in our people.