Jobs in HeanorCreate job alerts

As an experienced Traffic Management Operative, you will be required to work on Traffic Management Schemes for a range of projects, helping them to run smoothly and efficiently to achieve maximum production in a working day, whilst maintaining a high Health and Safety standard. This role requires flexibility due to the nature of the business. You must be able to work both days and nights, including some weekends as required. You must have a can do and responsible attitude to work. We are looking for someone to: • Oversee all methods of traffic management; Give and take, Priority, Stop/Go boards, Portable traffic signals, Convoy working, Road closures, Lane closures and diversions, • Ensure all work is carried out according to safe working methods and best practice procedures, • Carry out risk assessments and method statements on works involving traffic management, • Ensure that all activities associated with the job are carried out according to laid down procedures where possible. Identify areas that can be improved and report to your line manager, • Ensure that daily vehicle checks are carried out – to ensure cleanliness and tidiness of vehicle and the safety of the driver and passenger, • Promote positive company image whilst at work (via wearing of company clothing, attitude, and site cleanliness), • Demonstrate initiative by constantly looking to see where improvements can be made, • Assist the public, directing them through safe site lines when required, • Ascertain when management intervention is required GTM Golden Rules to be followed, • Only undertake Traffic Management activities that you have the qualification to undertake (LANTRA), • All Traffic Management setups must be compliant with guidance and legislation (Red Book, Chapter 8, ARTSM etc.), • Regularly check your site to ensure it remains compliant, • Report any unsafe acts and conditions, and rectify immediately if safe and competent to do so, • Drive safely and avoid distractions. Keep within the speed limit and drive with due care and attention to prevent road traffic collisions, • Park vehicles safely, taking consideration of members of the public and other road users, • Five-point PPE to be worn on site at all times, • Lantra 12d accreditation as a minimum TTMBC, 12d (M1-M2), • Lantra 12 a/b accreditation, IPV driver, foreman advantageous, • Provide evidence that you understand the differences between Chapter 8 and the Safety at Street Works and Road Works (red book) and how these apply, • Full valid UK driving licence, • Be able to read and understand CAD drawings, in relation to the works required, • Preferable to have mechanical ability in relation to Traffic Lights We offer a competitive salary based on experience along with a full benefits package. £12.71 - £15ph based on qualifications with enhanced rates for overtime. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy which you can find here - https://networkplus.co.uk/privacy-and-cookie-policy. Go Traffic Management has been serving traffic management solutions to clients since 2008, and are now one of the UK’s largest traffic management providers. Our services are delivered from our 22 regional depots, through our dedicated team of 200 employees and support network of approved suppliers. At Go Traffic Management, we have a reputation for providing clients with extensive, well-planned, and expertly delivered solutions for projects and schemes of all sizes. We pride ourselves in meeting (and often exceeding) clients’ expectations in a professional and cost-effective manner, which is a strategy that has resulted in our long-standing working relationships with clients, partners, and stakeholders. Be: SAFE - Go Traffic Management Our Be: SAFE campaign actively encourages our workforce to work safely and avoid unsafe acts and conditions by following four basic rules.

Are you an experienced Compressor Service Engineer looking to join a growing engineering business where your skills are valued and rewarded?We are looking for a motivated and customer-focused engineer to join our expanding field service team. You'll be responsible for servicing, maintaining, repairing and installing a wide range of compressed air systems and associated equipment for customers across multiple industries.This is an excellent opportunity to join an established engineering company with over 25 years' experience delivering compressed air solutions nationwide, offering long-term career development, manufacturer training and the opportunity to work with leading compressor brands.The Role Carry out planned preventative maintenance on air compressors, dryers, vacuum pumps and associated equipment.Diagnose and repair breakdowns both mechanically and electrically.Install new compressed air systems and ancillary equipment.Fault find using electrical schematics where required.Complete service reports and communicate effectively with customers.Participate in an on-call rota for emergency breakdown support.Ensure all work is completed safely and to a high standard.What We're Looking For Previous experience servicing industrial air compressors is essential.Good mechanical and electrical fault-finding skills.Experience working on leading compressor manufacturers such as CompAir, Hydrovane, Atlas Copco, Ingersoll Rand, BOGE, Kaeser or similar.Full UK Driving Licence.Strong customer service and communication skills.Ability to work independently while representing the business professionally.What's On Offer Competitive salary with regular overtime opportunities.Company van, fuel card, phone and specialist tools.Ongoing manufacturer and product training.Career progression within a growing engineering business.Pension scheme.25 days holiday plus bank holidays.Nationwide customer base with varied and interesting work.Supportive team environment where engineers are genuinely valued.TPBN1_UKTJ

Applications Engineer (CMM / Metrology) \n £38,000 - £45,000 + OTE £48 - £50k + Bonus + OEM Training + Progression + Company Benefits+ Travel \n Nottingham \n Are you a CMM Programmer or Metrology Engineer looking to take the next step in your career with one of the UK's leading distributors of precision measurement equipment, where you'll receive specialist manufacturer training? \n This is an exciting opportuni... \n \n ZIPC1_UKTJ

HGV Class 2 Driver | 2-4am Starts | Nottingham | 10-12 Hour Shifts \n £15.00 - £19.00 | FT & PT Available \n You can choose to start at 2 or 4am \n Drivers must have held their class 2 licence for at least 12 months \n Full training provided \n Barker Ross are currently recruiting for HGV2 Driver's for a food manufacturer in Nottingham. \n As a HGV2 Rigid Driver you will have the responsibility of delivering food to f... \n \n \n \n \n ZIPC1_UKTJ

HGV Class 2 Driver – Alfreton, Derbyshire \n People Solutions are currently recruiting for an HGV Class 2 Driver to join our well-established client based in Alfreton, Derbyshire. \n This is an excellent opportunity for drivers looking for consistent ongoing work with a pathway to a permanent contract. \n This is a 9-week temporary to permanent position for the right candidates. \n This role would suit candidates... \n \n \n \n \n \n \n \n ZIPC1_UKTJ

HGV Class 2 Tipper Driverrequired for a position with our well-established client in Ilkeston, Derby \n This particular company are well known locally, having operated in the area for over 15years, this thriving companynow focuses on Local and Regionwide delivery of Aggregates.LGV 2 Tipper Driverwill be placed on a Temporary to Permanent basis with a full time job available. \n \n The Role: \n HGV Class 2 Tipper... \n \n \n \n \n \n \n ZIPC1_UKTJ

Do you have 1 year of previous HGV Class 1 C+E experience? If so, apply today to work as an HGV Class 1 Driver for our client's retail site in the Tooling Sector. \n Staffline is recruiting HGV Class 1 Drivers in Alfreton. \n The rate of pay is £38,750 per annum PAYE or £15.46 per hour. \n This role is offering Monday to Friday with 1 night out needed per week. 0500am to 0600am starts £26.20 per night, ... \n \n ZIPC1_UKTJ

About Us: \n It takes a whole lot of passion to be at the centre of what makes a house feel like home and thats just what we do at DFS. Were the leading sofa retail specialist in the UK, helping people find a comfy seat on their great quality sofas since 1969. \n \n About the role: \n As a Frame Assembler, you'll play an important part in creating quality furniture that our customers can enjoy for years to come... \n \n \n \n \n \n \n \n ZIPC1_UKTJ

About Us: \n It takes a whole lot of passion to be at the centre of what makes a house feel like home and thats just what we do at DFS. Were the leading sofa retail specialist in the UK, helping people find a comfy seat on their great quality sofas since 1969. \n About the role: \n As a Sewing Machinist, you will use industrial sewing machines to stitch a variety of upholstery materials, including fabric, le... \n \n ZIPC1_UKTJ

Senior Salmon have a great permanent opportunity to join their client in teh DE75 area as a CNC Press Brake OperativeThe primary responsibilities of a Brake Press Operator are to bend sheet metal in accordance with design specifications and to ensure each piece produced is free of defects. To meet these main goals, they may perform the following job duties:Studying blueprints and specification sheets to understand technical requirementsSetting a computer-controlled press brake to project specificationsEnsuring proper positioning and alignment of metal inside the press brakeMonitoring the pressing processMeasuring and inspecting the finished sheet metal to ensure it matches specificationsTroubleshooting and addressing problems that arise during the pressing processPerforming routine maintenance on the press brakeComplying with all health and safety standards in the manufacturing facilityThese are permanent hobs with NO AGENCY - Apply now or call 01623 857585 for more detailsTPBN1_UKTJ

Imperial Personnel are currently recruiting Class 1 drivers to join our client based in Alfreton, Derbyshire, \n This is an excellent opportunity for both experienced drivers and newly qualified Class 1 drivers, offering regular weekday work with optional weekend overtime. \n Shift Details \n\n • Monday to Friday\n, • Start times between 02:00 and 05:00\n, • Weekend work available as overtime\n, • Nights out available but not requ...\n\n \n ZIPC1_UKTJ

Bendi FLT Driver-Easy work - weekly pay - day work \n \n FLT Bendi Driver,multiple positions at sites available with our well-established client in Riddings Alfreton, DE55. \n \n This company are well known locally, have operated in the area for over 15 years and what started as a small venture has rapidly grown into a well know UK firm which focuses on recycling ferrous metals and textiles. \n \n FLT Bendi Driver - t... \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Hours: 15 hours per week \n Shift Pattern: Monday and Wednesday, 9:00 to 17:00 \n Work Base: Office based with regular travel \n We're looking for a dedicated Hoarding Home Coach to join our team, providing long-term support to individuals across Derbyshire who are experiencing hoarding behaviours. \n This is a highly rewarding role where you'll work alongside people in a person-centred, trauma-informed and non-j... \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Multi Skilled Electrical bias Maintenance EngineerAlfreton, Derbyshire£48,000ContisThe opportunityWe're partnering with an established manufacturer in Alfreton area to find an experienced Multi Skilled Electrical bias Maintenance Engineer on a permanent basis. This is a key role within the site's maintenance function - keeping production equipment running efficiently through a mix of planned and reactive electrical maintenance.What you'll be doingPerforming planned preventative maintenance (PPM) and reactive breakdown response on production machinery and electrical systemsFault-finding and diagnosing electrical issues across LV systems, PLCs, drives, and control panelsSupporting installation and commissioning of new equipment and process improvementsWorking collaboratively with mechanical maintenance colleagues on multi-discipline tasksMaintaining accurate maintenance logs and contributing to site improvement projectsWorking safely at all times in line with site health, safety, and environmental requirementsWhat we're looking forRecognised electrical qualification - City & Guilds, NVQ Level 3, BTEC, ONC/HNC, or apprenticeship-trainedSolid maintenance experience within a manufacturing, processing, or industrial environmentStrong knowledge of LV electrical systems, motor drives (inverters/VFDs), and control panelsPLC fault-finding experience - Siemens S7 or Allen Bradley preferredAbility to read and interpret electrical schematics and technical drawingsMulti-skilled engineers with mechanical awareness are particularly welcomeWhat's on offerCompetitive salaryPermanent role with a stable, well-regarded local manufacturerVaried plant environment with genuine scope to developSupportive maintenance team and experienced managementOn-site parkingIf you feel this is of interest please send your CV directly to Dan at Daniel.Rose @ Cvtechnical.co.uk or call for a confidential discussion on 01455 291035TPBN1_UKTJ

HLOP Driver PM Shift Location: Derby Pay Rate: £14.14 per hour (2:00pm 8:00pm) | £17.15 per hour (8:00pm 10:00pm) Hours: Monday to Friday, 2:00pm 10:00pm Contract: Temp to PermQuest Employment is currently recruiting!We are looking for skilled HLOP Drivers to join a busy and well-established warehouse operation in Derby. This is an excellent opportunity for candidates seeking consistent afternoon shifts and the chance to secure a long-term role.The Role As an HLOP Driver, your responsibilities will include: Operating a High Level Order Picker (HLOP) in a safe and controlled manner Picking, replenishing, and relocating stock within the warehouse Ensuring goods are stored in the correct locations Assisting with general warehouse duties as needed Complying with all health and safety guidelines, including working at height Keeping work areas clean, safe, and organisedWhat We're Looking For Proven experience operating an HLOP Valid HLOP licence or recognised MHE qualification Confidence working at height with appropriate safety equipment Strong attention to detail Reliable, punctual, and able to work effectively within a team Flexible approach to supporting wider warehouse tasks Own transport is highly desirable due to limited public transport and site locationWhats on Offer £14.14 per hour from 2:00pm 8:00pm £17.15 per hour from 8:00pm 10:00pm Monday to Friday afternoon shift Weekly pay Temp-to-perm opportunity Friendly and supportive working environment Long-term career opportunitiesPlease note: The initial two weeks of training will take place at an alternative warehouse location before moving to the main Derby site.Apply Today If you are an experienced HLOP Driver ready for your next opportunity, apply now with your updated CV.Please note: Successful applicants will be required to attend an interview before starting.Quest Employment acts as an employment agency for permanent recruitment and as an employment business for temporary recruitment.TPBN1_UKTJ

The Recruitment Crowd are currently recruiting on behalf of our well known and industry-leading client based in the Nottingham area. We are looking for multiple HGV Class 2 Drivers (CAT C) to join the team. \n New Pass Welcome! \n Shifts: Shifts run across Monday to Sunday \n Hours: \n Start time Nights: 22:00pm - 23:59pm \n Start time Twilights : 14:00pm -16:00pm \n Pay Rate: \n\n • Nights - £16.35 per hour\n, • Twilight -£15.43 per ...\n\n \n ZIPC1_UKTJ

Internal Sales Account Manager Ilkeston, Derbyshire (Office-Based)From £32,000 per annumFull-Time PermanentAbout the Role We are seeking a motivated and customer-focused Internal Sales Account Manager to join a busy and growing team. This is an excellent opportunity for someone with experience in internal sales, account management, estimating, or customer service within a manufacturing or engineering environment.Reporting to the Lead Account Manager, you will be responsible for managing a portfolio of customer accounts, producing quotations, processing orders, and building long-term customer relationships. This is a fast-paced role where organisation, attention to detail, and excellent communication skills are essential.Key Responsibilities Produce accurate quotations and process customer sales ordersManage a portfolio of existing customer accountsBuild and maintain strong customer relationshipsRead and interpret technical drawings to support quotationsFollow up quotations and record customer feedbackManage customer expectations and provide regular updatesMonitor and prioritise workload to ensure deadlines are metAchieve a minimum target of 8 quotations per dayMaintain quote response times of less than 4 hoursLiaise with internal departments to ensure smooth order fulfilmentSupport continuous improvement initiatives and company standardsAdhere to all Health & Safety and 5S requirementsSkills & Experience Required Previous experience in Internal Sales, Account Management, Estimating, Sales Support or Customer ServiceStrong commercial awareness and customer-focused approachAbility to read and interpret technical or engineering drawings (desirable)Experience working within manufacturing, engineering, fabrication or industrial sectors (preferred)Strong IT skills, including Microsoft Office and ERP/MRP systemsExcellent communication and relationship-building skillsAbility to work effectively in a fast-paced environmentStrong organisational and time management skillsExcellent attention to detailProactive approach to problem-solvingTeam player with a flexible attitudeWhat's on Offer? Salary from £32,000 per year33 days holiday including bank holidaysCompany pension schemeLife insuranceFree on-site parkingStable and growing business with development opportunitiesWorking Hours Monday Thursday: 8:30am 5:00pmFriday: 8:00am 4:30pmLocation This is a fully office-based position located in Ilkeston, DE7 . Applicants should be able to reliably commute or be planning to relocate before starting.If you're looking for a fast-paced role where you can combine customer service, account management, and commercial skills within a manufacturing environment, we'd love to hear from you.INDMIDPlease reach out to sAFFRON gIDDINGS01296737349TPBN1_UKTJ

Job Title: Senior Project ManagerSalary: 65+k plus car allowancePrivate Healthcare Scheme6% Pension ContributionHours: 37.5 hours per week Monday to Friday 8.30am -5.00pm flexibility of hours is expected with this roleHybrid working: In the office Monday, Tuesday, Wednesday, and Thursday. Working from home Friday.Holiday: 25 plus bank holidays per annum1. JOB PURPOSEWorking in support of the Head of Projects to manage, execute and deliver projects to the business needs.To deputise for the Head of Projects as needed.The Senior Project Manager is expected to look after all aspects of project delivery using the approved Business Lifecycle Processes from initial set up to close out and lessons learnt.This includes management of elements not carried out directly by the Project function.Coordinating with other departments (Engineering, Production, etc) to ensure delivery requirements are achieved.To ensure projects and department activity aligns with the strategic aims of the businessTo act as mentor and provide support to the junior Project Managers in the Cullum Project Team2. JOB ACTIVITIESAssist with or carry out any other activities as required by your Line Manager.PROJECT DELIVERYManaging Critical Impact Projects throughout the Project Lifecycle to agreed Quality, Cost and Delivery TargetsManagement and Reporting of Project Status and Milestone activities to the Head of Projects and to the wider businessWorking with Business Development to support Project activities on tenders and quotes as necessary.Commercial understanding and execution of projects to the best advantage of the business, including robust contract variation control.Identification and Management of Risks and Issues in an appropriate manner using the approved Risk and Issue Management process.Management and reporting of Risk Mitigation Measures and Issue Controls to ensure optimal project delivery.Generation of accurate project plans, that ensure alignment with project scope, customer deliverables and business capacity.Clear Identification of all project deliverables for both internal and external stakeholders, including scheduling progress meetings throughout the life of the project.Understanding of project deliverables and business processes to ensure delivery of projects, including working with Project team and other departments to ensure on time delivery, within budget and to the correct quality levels.Working with the business to ensure that correct resources and suppliers are "On-board" to ensure "Right first time" delivery, within the necessary budgets and quality requirements.Financial control - understanding and setting up project budgets, feeding into the ERP system, invoice control and cash flow reporting.Responsible for setting and achieving stated project marginEnsuring Project milestones / invoices are submitted timely and with the appropriate documentation.Managing Projects using the agreed lifecycle processes from initial hand over and Kick off with the customer, through the business lifecycle gates and project processes.Delegating as necessary, with the support of management team, within the business to achieve the project objectives.Maintaining regular project progress meetings and timely project reporting as agreed with and to the customer.Taking responsibility for all aspects of project performance and compliance, including adherence to project budget , delivery and quality requirements, whilst ensuring the final deliverable is complete to customer specification, and accompanied with the appropriate project and compliance documentation.Maintaining an approved File structure in support of Project Lifecycle ManagementEnsuring detailed communications are placed and maintained to support the project, including action trackers, minutes of meetings and documentation control as necessary.Carrying out lessons learnt activities to ensure continuous improvement of project processes and business deliverablesAny other duties that may be required from time to time.3. SUPERVISION AND RESPONSIBILITIESKnowledge transfer of role within departmentCoaching & Mentoring where requiredStrong team working ethic and leadership skills, able to contribute to a dynamic group, working under own initiative and provide guidance to all members of the department and wider team as required.Good communicator (written and oral).Strong health, safety, environmental and operational management, and an ability to motivate people for all aspects of the business to fulfil both business and project requirements.Work to attain optimum performance within the Project Team and associated areas of responsibility.Maximise the use of Cullum management control and IT systems to ensure accurate and auditable project control.For information on signature authorisations that may be applicable to this role, please refer department manager4. GENERIC CONDITIONSPromote and represent the Company when required, setting a good personal example at all times.Take all possible and reasonable steps to create a harmonious working environment using effective communication and team working techniques.Be aware of, and adhere to Company policies and procedures, including but not limited to the Health, Safety, Welfare, Environmental & Quality policies and procedures and the Employee Handbook.Undertake duties as may be required within capabilities consistent with the Terms and Conditions of employment and responsibilities in accordance with UK and EC Laws.Be aware of, and adhere to, all applicable current Cullum IMS documentation including policies, procedures and the Employee Handbook.Undertake tasks and responsibilities assigned by line manager.Promote and represent the Company when required, setting a good personal example at all times.Take all possible and reasonable steps to create a harmonious working environment using effective communication and team working techniques.Be aware of, and adhere to Company policies and procedures, including but not limited to the Health, Safety, Welfare, Environmental & Quality policies and procedures and the Employee Handbook.Undertake duties as may be required within capabilities consistent with the Terms and Conditions of employment and responsibilities in accordance with UK and EC Laws.Undertake tasks and responsibilities assigned by line manager.Travel overseas will be required in this roleThis job description and person specification is a guide to the duties the post holder will be expected to undertake. It is not intended to be exhaustive or exclusive and will be changed as working requirements dictate.PERSON SPECIFICATION EDUCATION/QUALIFICATIONSEssentialHNC qualified or equivalent.DesirableHND or higher qualified.Formal Project Management qualification (e.g., Prince II or APMP) or familiar with the defined processes.KNOWLEDGE/EXPERIENCEEssentialExperience of delivering M&E design, manufacture and install projects within Energy, Nuclear, Petrochemical, Aerospace or similar industries, demonstrable experience of working to cost, timescale and quality constraints.Project Management and relevant engineering discipline backgroundDesirableGas Turbine knowledge.Fabrication / manufacturing project managementindustry experienceTECHNICAL KNOWLEDGE & ABILITYEssential & Desirable Please refer to Competency MatrixTICKETSPlease refer to the Safety Critical MatrixSKILLSEssentialVery good communication and organisation skills, ability to confidently present and negotiate with customers and internal stakeholders.Strong knowledge and skills in Microsoft Office products (Excel, Word, PowerPoint etc).Be technically and numerically competent, with an analytical approach.Commercial KnowledgeBe able to communicate effectively at all levels, both verbally and in writing.Be able to demonstrate effective organisational skills.Ability to work under pressure to meet customer deadlines.Management and people skills.DesirableClear understanding of the capabilities of Primavera P3e, Microsoft Project or Asta project planning software would be beneficial.ATTITUDEEssentialCommitment to providing a professional service at all times.Commitment to working with Cullum to ensure the ethical and long-term stability of the Company.Commitment to self development and to the development of others.OTHEREssentialOut of hours and overseas working may be necessary in order to meet customer demands and deadlines.Full UK Driving LicenceTPBN1_UKTJ

An exciting new Class 1 - Driver opportunity at DX!\n \n * This is a Dayshift vacancy*\n \n All about you\n \n \nYou will be friendly, hard-working and love the buzz of getting things done. We value team players and here at DX we are committed to providing our people with the technical and personal skills to progress their careers.\n \n About us\n \n \nWe are a leading independent parcel, mail and logistics services company o...\n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Multi Skilled EngineerLocation: AlfretonSalary: £52,000 + Pension + OvertimeContinental Shift Pattern 4 on 4 off (2 days / 2 nights)Reference: Jo7146/NHThe CompanyMy client is one of the UKs leading manufacturers within its field of extruded processing of aluminium based products . The company is a well established producer to the global markets, having plants in the UK, Europe, Asia, and America, with over 13,000 employees worldwide. The UK site is looking once again to expand due to further investment, within this globally secure organisation.Key SkillsApprentice Trained EngineerExperience of PLC Systems & Automated MachineryUnderstanding of PPM SystemsThe RoleThe successful candidate will be responsible for all aspects of day-to-day engineering and maintenance activities ensuring work is carried out to the highest standards and maximising machine efficiencies, working on several fast moving lines, driven by PLC automated machinery. The ideal candidate will come from a medium to heavy engineering background, but this is by no means a necessity and should be able to work on their own initiative, be a time served engineer with ideally a multi-skilled pedigree with PLC experience. You will also work on pneumatics, hydraulics, gearboxes other manufacturing heavy machinery. There is a huge amount of training on offer so the successful candidate will be in line to broaden their skills considerably.If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally and the company is looking to recruit this role as soon as possible.ETSConsultingLtd Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets.ETSConsultingLimited act as an employment business and employment agency and are registered in England and Wales asETSConsultingLimited, registered no 06164846. Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU.If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provideETSConsultingwith proof of your identity along with proof of your eligibility to work in the United Kingdom.TPBN1_UKTJ

HGV Class 1 DriverStart DateImmediateOur CustomerOur long established logistics client based Alfreton Derbyshire has an urgent requirement for HGV Class 1 Drivers to join their team on a regular ongoing basis.Job Description.Work involves Class 1 HGV Driving work to Manufacturing Sites or other similar sites across the UK. Various start times available ranging from Days 0500am to 0800am and Nights from 1600pm onwards.Experience with Curtain Sider or Box Trailers would be an advantage but not essential, we also have Flat Bed work available should you require this type of work instead.Licence requirements:HGV Class 1 LicenceUp to date CPC for your Class 1Up to date Digi card for your Class 1You Must:Have a positive attitude and a great work ethicBe punctualSmart appearance as you will be representing the company (no Jeans etc.)Keep vehicle clean and to a good standardGood communication skills are essential for this position as you might be needed to be contactable throughout the shiftSalary:Days per hour: £16.00 ph (PAYE), £18.50 ph (Inc Holiday Pay Via our Umbrella Paye)Night per hour: £17.00 ph (PAYE), £19.50 ph (Inc Holiday Pay Via our Umbrella Paye)Days/Nights - Saturdays - £18.00 (PAYE), £21.00 (Inc Holiday Pay Via our Umbrella Paye)Days/Nights - Sundays - £20.00 (PAYE), £23.00 (Inc Holiday Pay Via our Umbrella Paye)The above rates are either PAYE or Umbrella, please see above accordinglyLocation:Alfeton DerbyshireGet In Touch:In the first instance;send us your CV or call our office on 0115 9338626.Other jobs availableTomlin Personnel supply Class 1 Drivers to various companies across the Midlands and Yorkshire, so if this job isn't suitable please give us a call and we will do our utmost to find you the right jobTPBN1_UKTJ

HGV Class 1 Driver\n We are currently recruiting for HGV Class 1 Driver (HGV C+E) to work with one of our long-standing clients based in Derby DE1This is a fantastic opportunity to secure ongoing, full-time work with a well-established LGV logistics provider. \n The Role\n As a HGV Driver, you will be: \n\n • \n Delivering a wide range of goods including across the UK. \n • \n Driving modern, well-maintained trucks which is cu... \n\n\n \n\n\n \n\n\n \n\n\n \n\n\n \n\n\n \n\n\n \n\n\n \n\n \n ZIPC1_UKTJ

Contract Project Engineer (Multi-Disciplinary) Job Title Project Engineer (Multi-Disciplinary) ContractLocation Derby (Hybrid/Site-Based as Required)Contract 612 Month Contract (Potential Extension)Outside IR35£400 per dayOverview We are seeking an experienced, hands-on Project Engineer to support the delivery of industrial automation and renewable energy projects. The successful candidate will be multi-disciplined, capable of working across electrical design, PLC systems, and SCADA platforms while supporting project delivery from design through to commissioning.This role is ideal for an engineer who enjoys varied responsibilities and can work independently within a fast-paced project environment.Key Responsibilities Support the delivery of industrial control and automation projects.Produce and modify electrical designs and associated documentation.Carry out PLC fault finding, modifications and probing activities.Configure, develop and troubleshoot SCADA systems.Work closely with Project Managers, Controls Engineers and commissioning teams.Assist with system integration, testing and commissioning activities.Ensure all engineering work complies with relevant standards and project specifications.Provide technical support throughout the project lifecycle.Essential Skills & Experience Multi-disciplined engineering background with strong electrical knowledge.Experience in electrical design for industrial control systems.Practical PLC troubleshooting and modification experience.Experience working with SCADA systems.Knowledge of Schneider Electric PLC platforms.Experience using Iconics SCADA software.Ability to work across multiple engineering disciplines within project environments.Strong problem-solving and communication skills.Experience delivering projects within industrial automation, controls, manufacturing or renewable energy sectors.Desirable Experience Previous experience on renewable energy or energy infrastructure projects.Commissioning experience.Understanding of industrial communication networks and field instrumentation.Familiarity with control panel design and electrical schematics.Working Arrangement Contract position.Hybrid working available, with regular attendance at the Derby office and project sites as required.Engineers willing to travel or temporarily relocate for the duration of the project are encouraged to apply.Ideal Candidate You will be a proactive Project Engineer who is comfortable working across electrical design, PLCs and SCADA systems. You should be capable of turning your hand to a variety of engineering tasks and supporting projects from initial design through commissioning, with particular experience using Schneider Electric and Iconics platforms.TPBN1_UKTJ

Cook\n\n \n\n\n When registering to this job board you will be redirected to the online application form. Please ensure that this is completed in full in order that your application can be reviewed.\n\n\n \n\n\n Position: Cook \n Care home: Yarningdale \n Location: Hollywell Avenue, Codnor, Ripley, DE5 9SG \n Contract type: Part time, 20 hours per week \n Rate: Up to £13.27 per hour \n Care home CQC rating: Rated Good by CQC \n Are you an experie... \n\n \n ZIPC1_UKTJ

About Us: \n It takes a whole lot of passion to be at the centre of what makes a house feel like home and thats just what we do at DFS.Were the leading sofa retail specialist in the UK, helping people find a comfy seat on their great quality sofas since 1969. \n \n About the role: \n As a HGV Delivery Driver at DFS, you will be responsible for the safe and efficient delivery of furniture to and from our custome... \n \n \n \n ZIPC1_UKTJ

About Us: \n It takes a whole lot of passion to be at the centre of what makes a house feel like home and thats just what we do at DFS. Were the leading sofa retail specialist in the UK, helping people find a comfy seat on their great quality sofas since 1969. \n About the role: \n As a Quality Control Assistant you will check our fabulous products as they go on their journey through the Factory, checking ev... \n \n \n \n ZIPC1_UKTJ

HLOP Driver Location: DerbyPay Rate: £14.14 per hourHours: Monday to Friday, 6:00am 2:00pmContract: Temp to PermQuest Employment are recruiting! Quest Employment is looking for experienced HLOP Drivers to join a busy warehouse operation in Derby.This is an excellent opportunity to secure a long-term role with a growing business, working a consistent Monday to Friday day shift.The Role As an HLOP Driver, you will be responsible for:Operating a High Level Order Picker (HLOP) safely and efficientlyPicking and moving stock within the warehouseReplenishing stock locationsCarrying out general warehouse duties when requiredFollowing all health and safety procedures, including working at heightMaintaining a clean and organised working environmentWhat We're Looking For Previous HLOP driving experienceValid HLOP licence or accredited MHE qualificationComfortable working at height using the appropriate safety equipmentGood attention to detailReliable, punctual, and hardworkingAbility to work both independently and as part of a teamOwn transport is highly desirable due to the remote location of the site and limited public transport links.What's in it for you? £14.14 per hourMonday to Friday 6:00am to 2:00pmWeekly payTemp-to-perm opportunityFriendly and supportive working environmentLong-term career prospectsPlease note: The first two weeks of training will take place at an alternative warehouse location before transferring to the main Derby site. As the training location differs from the main site and both locations have limited public transport links, own transport is strongly recommended .Apply Today If you're an experienced HLOP Driver looking for your next opportunity, apply today with your up-to-date CV.Please note: Successful candidates will be required to attend an interview before starting.Quest Employment acts as an employment agency for permanent recruitment and as an employment business for temporary recruitment.TPBN1_UKTJ

Location: Derby Pay Rate: To be confirmed Hours: Sunday to Thursday, 2:00pm 10:00pm Contract: Temp to PermQuest Employment are recruiting for a Warehouse Operative - Yard Shunter to support operations within a busy contract logistics environment.The successful candidate will be responsible for the safe and efficient movement of trailers around the yard and onto or off loading bays. This role is essential in supporting inbound and outbound operations, maintaining yard flow, improving operational efficiency, and helping ensure trailers are positioned correctly for on-time dispatch and receipt performance.A key part of this position is flexibility. When yard activity is low, you will be expected to support warehouse operations to help maintain overall site productivity.Job PurposeThe main purpose of the role is to safely manage trailer movements within the yard while supporting warehouse operations when required to ensure efficient site performance.Key ResponsibilitiesTrailer Movements & Yard ManagementMove trailers safely between yard locations, staging areas and loading baysPosition trailers accurately onto bays for loading and unloadingRemove loaded trailers from bays and reposition them as requiredKeep the yard layout clear and organised to support operational flowSafety & ComplianceOperate shunter vehicles in line with all safety procedures and site rulesFollow safe systems of work for trailer coupling, uncoupling and bay movementsComplete pre-use vehicle checks and report any defects immediatelyMaintain full awareness of pedestrians, vehicles and hazards within the yardYard Checks & Equipment ControlEnsure trailers are secure, roadworthy and correctly chocked when parkedMonitor bay availability and communicate effectively with warehouse and transport teamsEnsure trailer allocation is aligned with loading priorities and schedulesOperational CoordinationWork closely with transport, gatehouse and warehouse teams to manage trailer flowRespond to real-time operational demands and prioritise trailer movements accordinglyEscalate delays, issues or risks that may impact site performanceFlexibility & Warehouse SupportSupport warehouse operations during periods of low yard activityCarry out loading, unloading, picking, packing or general warehouse duties as requiredMove flexibly between yard and warehouse tasks depending on business needsQuality & EfficiencyEnsure all trailer movements support efficient turnaround timesMinimise delays and support on-time departure and receipt targetsMaintain accuracy with trailer allocation and bay positioningContinuous ImprovementIdentify opportunities to improve yard flow and efficiencySupport best practice across yard management and safety proceduresKnowledge, Experience & SkillsEssentialLGV Class 1 shunter licenceBasic level of education, including numeracy and literacyExperience in a yard, driving or warehouse environmentExperience operating vehicles safely in operational environmentsStrong awareness of health and safety in yard environmentsAbility to manoeuvre trailers safely and accuratelyGood spatial awareness and risk assessment skillsAbility to work flexibly across different tasksClear communication with multiple stakeholdersReliable and disciplined approach to safetyAbility to work independently and as part of a teamDesirablePrevious shunter or yard management experienceExperience in logistics or distribution centresKnowledge of transport and loading processesAbility to coordinate and prioritise activities in a fast-paced yard environmentOther InformationThis is a temporary role with a temp to perm opportunityPay rate is to be confirmedRole is primarily yard-based and involves working outdoors in varying weather conditionsStrict adherence to health and safety procedures is required, particularly around vehicles and trailer movementsHigh levels of flexibility are required, including supporting warehouse operations when yard demand is lowThe role may involve shift work, including nights and weekendsThis position is critical to safe yard operations, efficient trailer flow and overall site performanceApply TodayIf you have an LGV Class 1 shunter licence and experience in yard, driving, warehouse or shunting environments, apply today with your up-to-date CV.Quest Employment acts as an employment agency for permanent recruitment and as an employment business for temporary recruitment.TPBN1_UKTJ

Early Morning Delivery Drivers Needed! \n \n Join News Team Group, a fast-growing company delivering newspapers and magazines to homes and businesses across the UK. Were looking for reliable, self-employed delivery drivers who are ready to hit the road and make an impact in their local community. \n Join a team that values your effort and pays you fast.Immediate Starts Available Ready to go? So are we! \n Why J... \n \n \n ZIPC1_UKTJ

Are you a native or fluent German speaker with experience in the automotive industry? Do you have strong attention to detail, enjoy researching how vehicle systems work, and want to develop your career in marketing?ECU Testing has an exciting opportunity for someone with German language skills and automotive knowledge to join our in-house marketing team, helping to develop German content and support our continued international growth. Previous SEO experience isn't essential, as we'll provide full training to the right candidate.The Role: Your main objective will be to help ensure our German website content is accurate, natural, useful and easy for customers to find through search. You'll receive support and training on SEO and content writing fundamentals, while helping to identify where translated content could be improved for accuracy, readability, terminology or search visibility.About Us: We are the market leader in the automotive control unit remanufacturing industry. We specialise in providing remanufacturing solutions for various vehicle control units including engine management, transmission, anti-lock braking, and many more. Situated between Nottingham and Derby, our office is located in Heanor with the entrance to Shipley Country Park on our doorstep.Key Responsibilities:· Review, improve and help create German marketing content.· Ensure content is accurate, natural and suitable for a German-speaking audience.· Proofread translated German content, checking accuracy, terminology and readability.· Support keyword and market research for SEO improvements on German web pages.· Help create German PPC ad copy and support wider German marketing content.· Use SEO, PPC and AI-assisted marketing tools to improve content quality and performance.· Help grow ECU Testing's online visibility in the German market.Desirable Skills and Experience:· Native or fluent German speaker with excellent written German and strong attention to detail.· Good understanding of written English.· Experience working in the automotive industry.· Strong interest in vehicles, diagnostics, electronics or how automotive systems work.· Enjoys research, problem-solving, and has a proactive attitude towards checking quality and improving content.· An interest in SEO, digital marketing, search engines or online customer behaviour.What We Will Offer You:? A learning-centric environment where you can grow your skills in SEO and technical content writing.? Access to funded training in SEO and digital marketing.? 32 days holiday per year, inclusive of bank holidays.? Fully air-conditioned office.? Free on-site parking.? Unlimited barista-quality coffee.? Recreation facilities (Full VR driving/gaming simulator/dart boards/pool tables).? Free takeaway meal every Friday, named ‘FAT FRIDAY' by all the staff.? Access to a fully equipped company gym.? Birthday gifts.? Christmas party, fully paid for by the Managing Director.? Annual team building days.? Excellent in-house career development opportunitiesWork Hours: 9:00 – 17:30 Monday-FridayDepartment: Digital MarketingStarting Salary: From £32,000If your skills match the above please press apply.TPBN1_UKTJ

\n \n \n \n \n \n \n \n HGV Class 1 Driver - Alfreton, Derbyshire \n People Solutions are currently recruiting for an HGV Class 1 Driver to join our well-established client based in Alfreton, Derbyshire. \n This is an excellent opportunity for drivers looking for consistent ongoing work, with a pathway to a permanent contract for the right candidates through a 9-week temp to perm role. \n This position is ideal for applicant... \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ \n \n \n \n \n \n \n \n

Class 2 Driver -Vehicle Delivery Ilkeston \n We are currently looking to recruit a professional and experienced Class 2 (Category C) Driver to join a well-established and growing provider of commercial vehicle and fleet solutions based in Ilkeston. \n Supporting a modern and diverse fleet of HGVs and specialist vehicles, this role is ideal for a driver who takes pride in delivering a high standard of ser... \n \n ZIPC1_UKTJ

Senior Quantity Surveyor \n Civil Engineering \n Surrey / Woking | Permanent \n Looking for your next move with a well respected contractor delivering major infrastructure projects and backed by a strong pipeline of secured work? \n Were working confidentially with a highly regarded contractor seeking a Senior Quantity Surveyor to join their growing team in the Surrey / Woking area. \n This is a great opportunity to... \n \n ZIPC1_UKTJ

Registered manager-mental health and Learning disabilitiesAlfreton, DerbyshireGood CQC ratedSmall service40 hours per week£60k plus benefitsWe are seeking a Registered Manager to lead a residential mental health service in Alfreton Derbyshire. This role requires strong leadership, a calm and values-driven approach, and a clear commitment to safeguarding, person-centred practice, and high-quality outcomes for people with complex needs, including predominantly Mental Health with some Learning Disabilities, challenging behaviours and brain injuries.The home has an excellent reputation locally and promotes strong links with the local community facilitating people to access local amenities, public transport and education opportunities.The home also has a structured programme to assist individuals back to work through supported commercial activities within the home and at other locations.Key ResponsibilitiesOversee day-to-day operations of the residential service in Derbyshire, ensuring safe, effective and compliant care deliveryLead and develop staff to deliver consistent support, ensuring dignity, choice and independence are at the centre of daily practiceManage service quality, performance, risk and continuous improvement, including audit and action planningPromote positive outcomes by supporting individuals to live lifestyles of their choosingMaintain strong safeguarding procedures and ensure reporting, documentation and incident management meet legislative and best-practice expectationsEnsure compliance with CQC legislation, updates, changes and relevant best practiceWhat Were Looking ForExperience in a leadership role within residential care, ideally mental health servicesDemonstrable experience managing people, service delivery and quality standards, including working with Learning DisabilitiesStrong understanding of safeguarding and the principles of safe, person-centred supportExcellent organisational skills, time management, and the ability to work on your own initiativeHolds or is working towards a Level 4 or 5 qualification relevant to registered management in residential careProven commitment to positive values and promoting independence, choice and respectQualifications & ComplianceCQC awareness and commitment to staying current with legislation, guidance, and best practicesLevel 4 or 5 qualification, or progress towards this requirementTPBN1_UKTJ

HGV Class 1 Driver | Nottingham | 9-12 Hour Shifts | FT & PT Available £18.50-£20.00 PAYE Only+ Holiday Pay | Starts Mainly Between 11am-7pm inc Weekend Shifts \n Immediate start !! \n Call Alex on 07570315844 \n Barker Ross are currently recruiting for HGV1 Artic Driver's for a food manufacturer in Nottingham (NG16). \n Shift Pattern - Various shifts start times between 11am-7pm - Weekend availability needed \n Apply... \n \n \n \n \n ZIPC1_UKTJ

HGV Class 1 Driver\n We are currently recruiting for HGV Class 1 Driver (HGV C+E) to work with one of our long-standing clients based in Derby This is a fantastic opportunity to secure ongoing, full-time work with a well-established LGV logistics provider. \n The Role\n As a HGV Driver, you will be: \n\n • \n Delivering a wide range of goods including across the UK. \n • \n Driving modern, well-maintained trucks which is curta... \n\n\n \n\n\n \n\n\n \n\n\n \n\n\n \n\n\n \n\n\n \n\n\n \n\n \n ZIPC1_UKTJ

Product Manager - Fleet TelematicsWhen registering to this job board you will be redirected to the online application form. Please ensure that this is completed in full in order that your application can be reviewed.At Microlise, we're passionate about developing technology that helps fleets operate more safely, efficiently and sustainably. As a Product Manager Fleet Telematics, you'll play a key role in shaping and delivering products that solve real-world challenges for fleet operators.Working closely with Engineering, Delivery, Sales, Pre-Sales and Marketing teams, you'll help define product strategy, prioritise development activities and ensure our solutions continue to meet the evolving needs of customers across the transport and logistics sectors.This is an excellent opportunity for an experienced Product Manager looking to take ownership of a market-leading product portfolio within a growing technology business.You'll be joining a market-leading technology business where your work will directly influence products used by thousands of fleet operators. If you're passionate about technology, innovation and creating products that deliver genuine customer value, we'd love to hear from you.What You'll Be Doing Own and evolve key areas of Microlise's telematics and video telematics product portfolio, helping to shape the product roadmap and future direction.Work closely with customers, stakeholders and industry experts to understand challenges, identify opportunities and translate insights into product enhancements.Collaborate with Engineering, UX and Delivery teams to define requirements, prioritise development activity and deliver high-quality solutions.Support product launches by working with Sales, Marketing and Pre-Sales teams to create compelling product messaging and customer communications.Monitor product performance, customer feedback and market trends to drive continuous improvement and commercial success.Act as the voice of the customer, ensuring our products deliver real value to fleet operators and remain competitive within the transport technology market.What We're Looking For Proven experience in a Product Manager role with responsibility for products throughout their lifecycle.Experience working with telematics, video telematics, fleet technology, SaaS or related technology products.Understanding of product management methodologies and Agile delivery frameworks.Experience gathering customer requirements and translating them into clear product priorities.Strong stakeholder management and communication skills.Commercial awareness and the ability to balance customer, technical and business needs.Ability to analyse data and use insights to support decision-making.DesirableExperience within the transport, logistics, fleet or commercial vehicle sectors.Knowledge of telematics technologies including GPS tracking, vehicle data, driver behaviour and camera solutions.Understanding of regulatory requirements relating to fleet operations and compliance.Experience supporting go-to-market activities and product launches.Familiarity with IoT, connected vehicle technologies or cloud-based platforms.Why Microlise? When your groceries arrive at your door or you sign for your online parcel, one or more of our software, telematics or proof-of-purchase solutions has probably been used. Our solutions deliver value to many of the UKs leading grocery retailers and food logistics providers as well as to household names including JCB, Eddie Stobart, Carlsberg, Waitrose and Tesco.Proudly Midlands-based, Microlise has been operating for over thirty years, and recently became a Publicly Listed Company with shares trading on the London Stock Exchange. Our growing business is guided by our culture which drives the way we behave, the way we work, the way we connect with our customers, and the way we support and develop our people.Full support and training to ensure you are well equipped to succeed in your rolePrivate medical insurance with Vitality Health including rewards for members such as: Free Amazon Prime, Apple Watch, discounted gym membership and many more33 days holiday, including bank holidays, increasing year on year to 38 days, then further increases with length of serviceLife Assurance, 4 times your annual salaryFree Costco membership, 20% off EE mobile and line rental, and other discounts with Reward GatewayInvested in employee health and well-being with over 20 mental health first aiders in the businessEmployee Assistance ProgrammesGreat staff extras: Easter eggs, yearly BBQ, Christmas gifts, annual staff awards and many more incentivesGreat Place to Work certified We have been recognised by the global authority on workplace culture, so come be a part of our successBest Workplace in the UK for Development, Technology, Wellbeing and WomenRecruitment Process For successful candidates, interviews will take place whilst the advert is still live; so dont delay getting your application in!Recruitment Agencies Whilst we make every effort to directly source candidates for our live roles, we do have a very small preferred supplier list on the occasion we may require additional support. We therefore do not accept speculative CVs and/or cold calls to our Recruitment Team or Hiring Managers.TPBN1_UKTJ

Contracts ManagerRayden Engineering Ltd is a Mechanical & Civil Engineering Company, based in the East Midlands of England; and specialising in the pre-fabrication, welding and installation of pipework systems of a wide variety of alloys.We are also involved in the installation of: Cross-country Pipelines and Pipeline Diversions (up to 30) and Above Ground Installations (AGIs).We are currently executing major contracts nationwide for major oil & gas companies that include AGIs, pipelines and major civil works. Our continued success and growth over the past number of years now necessitates the appointment of an experienced Contracts Manager .Rayden Engineering Ltd. prides itself in providing a high-quality service to its customers using a dedicated and committed team.We require a Contracts Manager who will have a proven track record in the above-mentioned industries with contracting experience, team ethos, high levels of motivation & commercial awareness, strong IT skills, excellent written & verbal communication skills, exceptional organisation & time management skills and will be able to demonstrate a high degree of self-motivation, and hence a good understanding of the importance of consistently providing a quality service to our clients.As Contracts Manager, your role will involve the delivery of multiple projects nationwide and to effectively manage our team of Project Managers.The successful candidate will be:Operationally and commercially responsible for the successful delivery of the portfolio of all contracts,Ensuring Health and Safety standards are maintained to the highest levelTake overall responsibility for constructing the projects to a high standard, ensuring compliance with our clients specifications,Controlling and managing project / site budgets including profit and loss, and managing budget constraintsMaximise profit, minimise risk & protect commercial interestsEffectively manage our Contract Support Team,Overseeing Site Managers and Sub ContractorsWorking with the procurement department to manage supply chains and cost effective purchasing on siteExecuting programmes effectivelyManaging change throughout the construction processEnsuring quality and consistency of workmanship from all trades, from appointment to completionRequired to maintain records / diaries and actively support the resolution of all construction issues,Required to build positive and productive working relationships with our clients; delivering excellent customer service and seeking ways to continuously improve and exceed expectations,Be able to motivate team members to achieve predetermined goals and targets,Computer literate and a strong communicator both written and verballyThe ideal candidate will have:Gained their experience in the pipeline / utilities industry ,Excellent understanding of the gas and oil industry ,Excellent financial, commercial, business knowledge and people acumen to support the operational team ,Excellent people leadership skills, with evidence of the ability to engage and motivate people at all levels ,Strong customer service ethos ,Excellent customer presentational ability, both verbal and written ,Proven track record in commercial, financial, operational, risk management , project planning & tracking ability and skills including working knowledge of a number of model forms of contract. (e.g. NEC3 & 4) therefore requires strong financial and commercial awareness skills ,Sufficient expertise to support and advise the operational team on effective contractual and commercial approaches as well as to deliver and implement these ,Proven ability to manage and develop a professional and effective operational team, ensuring objectives are set, monitored and achieved; and that all employees are appraised and have a personal development plan ,The willingness and ability to 'roll up their sleeves', work well amongst others, and knowledgeably deliver contractually and commercially ,The ability to demonstrate a good track record; working on civil / mechanical engineering projects and have a good understanding of the key issues affecting quality, safety and progress, along with the commercial elements of all projects ,Excellent interpersonal skills and be looking to progress their career.Applicants should have a Construction related Higher National Certificate, Degree or equivalent, with previous contracts management experience of at least 10 years.Salary: Competitive salary + excellent benefits package.If you feel you can make a strong contribution to our company please apply in writing enclosing your current CV.TPBN1_UKTJ

Contract Maintenance Engineer - Electrical Bias \n Location: DE55 Rate: Up to £40 per hour Contract: Until the end of the year, with potential to extend Shift: Permanent Nights - Sunday to Thursday, 10:00pm to 6:00am Start: ASAP \n We are currently recruiting for an experienced Contract Maintenance Engineer with an electrical bias to join a busy food manufacturing site in the DE55 area. \n This is an excellent opportunity for a skilled maintenance engineer looking for a long-term contract, with the potential for an extension beyond the initial end-of-year period. \n The Role: \n\n • Carry out planned and reactive maintenance across the production facility\n, • Diagnose and repair electrical and mechanical faults\n, • Minimise machinery downtime and ensure equipment is operating efficiently\n, • Complete preventative maintenance and fault-finding activities\n, • Work closely with the production team to maintain smooth and efficient operations\n, • Ensure all maintenance work is carried out safely and to a high standard\n\n The Ideal Candidate: \n\n • Time-served or suitably qualified Maintenance Engineer\n, • Strong electrical maintenance and fault-finding experience\n, • Previous experience within a manufacturing environment, ideally food manufacturing\n, • Comfortable working permanent night shifts\n, • Able to start at short notice\n, • Strong understanding of health & safety and safe working practices\n\n What's on Offer: \n\n • Up to £40 per hour\n, • Contract initially running until the end of 2026\n, • Potential for a longer-term extension\n, • Permanent night shift pattern: Sunday to Thursday, 10pm-6am\n, • ASAP start\n\n If you're an experienced Electrical Bias Maintenance Engineer available for an immediate contract and interested in a long-term opportunity, we'd love to hear from you.

Job Title: CNC Laser Setter OperatorNight Shift CNC Laser Setter Operator (4 Positions Available)Location: DerbySalary: Up to £40,000 (depending on experience)Shift Pattern: MondayThursday (4 on / 3 off) 6:00pm 6:00am (12-hour shifts)Future shift pattern may move to 4 on / 4 off About the Role We are currently recruiting 4 Night Shift CNC Laser Setter Operators to join a busy, modern manufacturing environment operating 24/7. Following a recent £2 million investment in brand-new machinery , this is an exciting opportunity to be part of a growing and forward-thinking production team. This is a hands-on role where youll primarily set and operate CNC laser cutting machines , ensuring efficient production, quality output, and machine optimisation within a fast-paced manufacturing environment. Key ResponsibilitiesSetting and operatingCNC laser cutting machinesLoading programs and carrying out machine set-upsPerforming tooling and parameter adjustments to optimise productionReading and interpreting engineering drawings accuratelyWorking with metal components to precise specificationsConducting quality checks to ensure products meet required standardsMaintaining high standards of productivity and efficiencySupporting a flexible, multi-skilled production environmentAdhering to health & safety procedures at all timesWhat Were Looking For Were keen to hear from candidates who have:Previous experience as a CNC Laser Setter OperatorExperience setting and operating CNC laser machinesAbility toread and understand technical drawingsKnowledge of machine set-up, offsets, and quality inspection proceduresA strongwork ethic and reliable attitudeExperience within a sheet metal or manufacturing environmentWillingness to learn and develop new skillsWhats in It for You?Competitive salary up to £40,000Excellent work-life balance with a 4-day working weekOpportunity to work with state-of-the-art laser cutting machineryOngoing training and development opportunitiesStable role within a well-invested manufacturing operationLong-term career prospects for an experienced CNC Laser Setter OperatorApply Now If youre an experienced CNC Laser Setter Operator looking for a long-term night shift opportunity with excellent earning potential and progression, wed love to hear from you.Thank you for your application. Due to the high volume of responses, we regret that we cannot reply to every applicant individually. If you have not heard from us within 5 working days, please assume your application has been unsuccessful. For more opportunities, please visit our website.INDMIDTPBN1_UKTJ

We're looking for a motivated and passionate Kitchen Assistant who will be the heart of our operation for Chartwells on a part time basis, contracted to 20 hours per week. You'll join a team that takes a real pride in what they do, in their food, in their brand but most of all pride in their people. You'll get given every opportunity to progress within a company that invests in its people, celebra...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKCT

You can make a difference, be rewarded, and join our impact-driven community now - at Targeted Provision we change lives! Multiple positions are available, hiring is ongoing, and interviews are being arranged as applications come in. We will contact you with nearby tutoring work within 45 minutes drive of the advertised location and/or within 45 minutes of the postcode you provide us. We are working with Schools and Local Authorities in your area and are looking for Core Subject (Maths, English, or Science) SEND Tutors and Teachers like you to transform the lives of Young People with SEND and SEMH needs in your community! We are looking for SEND Tutors and Teachers with a genuine passion for transforming the lives of disengaged, at-risk, and vulnerable learners – take control of your teaching journey with us and work flexibly, creatively, and in a trauma-informed way to make a difference in your own life and the lives of the young people we support. • Competitive pay: £28 - £35 per hour, • Flexible working: In person, hybrid, and work from home teaching opportunities, • Flexible hours: Flexible part-time up to full-time hours to suit your schedule, • CPD and employee mentoring: TES CPD suite and professional mentor access, • SEND Support Team: Support to keep a team around you and the child, • Community and Company Events: Knowledge sharing and resources, • Referral Programme: Get rewarded for successful tutor referrals, • A Role with Purpose: Join a child-centred company committed to reimagining the world of support for vulnerable young people for the better, • Experience: 2+ years teaching experience, ideally working with SEND, SEMH, MLD, SLD, and/or PMLD in a holistic and trauma-informed way, • Subjects: Familiarity teaching English, Maths, and/or Science, • Qualifications: Qualified Teacher Status (QTS / QTLS), • Compliance: Enhanced DBS (we can facilitate this if needed) and 2+ professional references, • Location: You must be based in the UK with the right to work in the UK, even for remote / online jobs, • Safeguarding: Knowledge of safeguarding and creating a safe learning environment, • Provide in person, online / remote, and hybridMaths, English, or Science tuition to children, teenagers, and young people with SEMH and SEND needs, including MLD, SLD, PMLD, and other Additional Educational Needs, • Support pupils and students, ranging from KS1 - KS5 (as appropriate for your skills), referred by local authorities and schools by planning and delivering flexible, trauma-informed tutoring and mentoring, • Plan and report for lessons and provide regular feedback on student progress, • We are on a mission to raise the standard of education provided to young people with SEND (Special Education Needs and Disabilities), as well as other needs such as SEMH needs (Social, Emotional and Mental Health). We are increasingly supporting children and young people with MLD (Moderate Learning Difficulties), SLD (Severe Learning Difficulties), and PMLD (Profound and Multiple Learning Difficulties). We want you as part of our mission!, • Apply in less than 5 minutes via our mobile and browser optimised application form, • Interviews are being scheduled on a rolling basis - apply now and start making a difference!, • We welcome tutors from all backgrounds - our learners come from diverse communities and our organisation must reflect and represent their experiences, • We take Safer Recruitment seriously. All candidates must pass through our safer recruitment process to ensure their suitability to work with children and young people, • This position involves engaging with us on a self-employed basis, as and when opportunities arise Individuals with highly relevant experience from teaching background often have worked in the following roles: • SENDCo (Special Education Needs Coordinator), • SLD / MLD Teacher, • Autism / ADHD Support Teacher, • Intervention Specialist / Teacher / Tutor, • Ex-Teacher Other highly relevant roles from therapeutic and learning support background include: • Learning Support Assistant (LSA) / Teaching Assistant (TA), • Educational Therapist, • Speech and Language Therapist (SALT), • Educational Psychologist (EP), • Inclusion Coordinator If you hold one of these roles, meet our requirements, and are considering a career change please do consider applying with us. Due to the number of applications we receive, we are unable to respond to every applicant. We aim to respond to all successful applicants.

Quality Inspector / Senior Quality Inspector (x2) – We're Hiring! Ilkeston Up to £45,000 + Overtime + Benefits We're looking for 2 experienced Quality Inspectors / Senior Quality Inspectors to join a growing manufacturing business. These are hands-on roles where you'll be responsible for inspecting complex components, maintaining quality standards and, for senior candidates, supporting inspection planning and team coordination.What you'll need: Hands-on quality inspection experience within manufacturing (composites or aerospace desirable) Experience using Romer Arm, PolyWorks or other 3D inspection equipment Ability to read and interpret engineering drawings Strong attention to detail and knowledge of quality processes and NCRsWhat's on offer? Up to £45,000 + overtime Early finish every Friday 25 days holiday + pension + employee benefits Genuine progression opportunities within a growing manufacturing business

Join a leading manufacturing company as an Maintenance Engineer. This is a fantastic opportunity for those looking to take the next step in their career. This role offers excellent benefits, including a competitive salary, overtime opportunities, and continuous training to support your growth as a Maintenance Engineer. This position is Permenant nights. What's in it for you as Maintenance Engineer \n\n • S...\n\n \n \n ZIPC1_UKTJ

Senior Planner - Delivery! \n Ready to Lead the Future of Delivery? Join the Evri Delivery Planning Team as a Senior Planner! \n AtEvri, we dont just deliver parcels, we deliver possibility. As aSenior Planner, youll sit at the heart of our operation, shaping the strategy that keeps our network moving seamlessly. This is your chance to lead, influence, and make a real impact across an entire division. \n Youl... \n \n ZIPC1_UKTJ

Maintenance EngineerSalary: £52,200- £55,900 + Pension + BenefitsContinentals - 2 days, 2 nights, 4 offLocation: HeanorReference: Jo7323/NHThe CompanyAn excellent opportunity has arisen with one of the UKs instantly recognisable manufacturers, who are an international employer specialising in the processor & production of plastic recycled products for the consumer and chemical industries using plastics. They are part of a wider group which has a reputation which is second to none in the chosen marketplace, which will support career development within this global giant.Key SkillsApprentice Trained Engineer in Electrical or Mechanical EngineeringExperience of PLC systems & Automated machineryUnderstanding of PPM systemsYou will have served a minimum of a full apprenticeship in electrical or mechanical engineering and have experience working within the maintenance of electrical and mechanical machinery. On a day to day basis, you will work on a variety of production machinery including PLC systems, extruders, conveyors, wrappers, granulators and packing machinery. The ideal candidate will also have experience within a manufacturing site and the ability to work within a team or autonomously as required. Longer term opportunities are also available within this instantly recognisable group to progress your career. If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally and the company is looking to recruit this role as soon as possible.ETSConsultingLtd Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets.ETSConsultingLimited act as an employment business and employment agency and are registered in England and Wales asETSConsultingLimited, registered no 06164846. Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU.If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provideETSConsultingwith proof of your identity along with proof of your eligibility to work in the United Kingdom.TPBN1_UKTJ

Manufacturing Project Engineer (CapEx) £46,000 + 3k Bonus + 34 Days Holiday + Company Benefits Ripley \n Are you a Project Engineer from a manufacturing background looking to join a world-leading company, offering a highly autonomous, rewarding, and varied role handling CapEx projects up to the value of £1 million? \n On offer is an exciting opportunity to join a dynamic team of Engineers, where you will ... \n \n ZIPC1_UKTJ

Join a leading manufacturing company as an Maintenance Electrician, This is a fantastic opportunity for those looking to take the next step in their career. This role offers excellent benefits, including a competitive salary, overtime opportunities, and continuous training to support your growth as a Maintenance Electrician. What's in it for you as Maintenance Electrician; \n\n • Salary: £53,000 per annum\n, • H...\n\n \n \n ZIPC1_UKTJ