Acs jobs in Austin, TexasCreate job alerts

Location: Austin, TX Facility: Seton Medical Center-Austin Department/Specialty: Diagnostic Cardiology Schedule: Nights | Full-time | Monday - Thursday, 7pm - 5:30am Ascension is a leading nonprofit Catholic health system with a culture and associate experience grounded in service, growth, care and connection. We empower our 99,000+ associates to bring their skills and expertise every day to reimagining healthcare, together. Recognized as one of the Best 150+ Places to Work in Healthcare and a Military-Friendly Gold Employer, you’ll find an inclusive and supportive environment where your contributions truly matter. • Comprehensive health coverage: medical, dental, vision, prescription coverage and HSA/FSA options, • Financial security & retirement: employer-matched 403(b), planning and hardship resources, disability and life insurance, • Time to recharge: pro-rated paid time off (PTO) and holidays, • Career growth: Ascension-paid tuition (Vocare), reimbursement, ongoing professional development and online learning, • Emotional well-being: Employee Assistance Program, counseling and peer support, spiritual care and stress management resources, • Family support: parental leave, adoption assistance and family benefits, • Other benefits: optional legal and pet insurance, transportation savings and more Benefit options and eligibility vary by position, scheduled hours and location. Benefits are subject to change at any time. Your recruiter will provide the most up-to-date details during the hiring process. • Perform comprehensive cardiac ultrasound exams as a Cardiac Sonographer to evaluate heart structures using advanced clinical protocols., • Deliver high-quality diagnostic images and clinical documentation to the EMR and PACS for accurate physician review and patient diagnosis., • Execute precise imaging procedures by adjusting equipment parameters and transducer maneuvers to capture critical pathology and minimize imaging artifacts., • Maintain rigorous safety standards and quality improvement protocols to ensure full compliance with healthcare regulatory agencies and department policies., • Collaborate with the interdisciplinary team to provide exceptional patient care while managing procedure room readiness and specialized imaging equipment. Licensure / Certification / Registration: • BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted., • One or more of the following required:, • Cardiac Sonographer specializing in Adult Echo credentialed from the American Registry for Diagnostic Medical Sonography (ARDMS) obtained within 6 Months (180 days) of hire date or job transfer date. Advanced Pediatric Echocardiography Registered Diagnostic Cardiac Sonographer-Pediatric Echocardiography (RDCS-PE) or Fetal Echocardiography Registered Diagnostic Cardiac Sonographer-Pediatric Echocardiography (RDCS-FE) also accepted., • Medical Sonographer specializing in Fetal Echocardiography credentialed from the American Registry for Diagnostic Medical Sonography (ARDMS) obtained prior to hire date or job transfer date., • Sonography Tech specializing in Cardiac credentialed from the Cardiovascular Credentialing International (CCI) obtained within 6 Months (180 days) of hire date or job transfer date. Cardiovascular Credentialing International - Advanced Cardiac Sonographer (CCI ACS) or Cardiovascular Credentialing International - Registered Congenital Cardiac Sonographer (CCI-RCCS) also accepted. Education: • High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required., • ARDMS with Pediatric experience Equal employment opportunity employer Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the poster or poster. Fraud prevention notice Prospective applicants should be vigilant against fraudulent job offers and interview requests. Scammers may use sophisticated tactics to impersonate Ascension employees. To ensure your safety, please remember: Ascension will never ask for payment or to provide banking or financial information as part of the job application or hiring process. Our legitimate email communications will always come from an @ascension.org email address; do not trust other domains, and an official offer will only be extended to candidates who have completed a job application through our authorized applicant tracking system. E-Verify statement Employer does not participate in E-Verify and therefore cannot employ STEM OPT candidates.

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing an autonomous gun turret using advanced computer vision and control systems to precisely detect, track, and neutralize enemy drones. Position Overview We are looking for a motivated Inventory Control Specialist to join our team. In this role, you’ll learn the ins and outs of our supply chain while helping us manage the essential materials that power our production line. This is a great opportunity to get hands-on experience in a fast-paced environment and play a vital part in delivering state-of-the-art technology to the DoD Additional Details • Openings available for First Shift, Second Shift and Weekend Shifts What You’ll Do ● Inventory Management: Maintain accurate and up-to-date records of all inventory items. Monitor inventory levels and reorder points to prevent stockouts and overstock situations. ● Prepare 'kits' for the production team by gathering all necessary parts and hardware listed on manufacturing orders, ensuring the assembly line has everything they need to start work immediately ● Conduct regular inventory counts and reconcile discrepancies ● Procurement Collaboration: Collaborate with the procurement team to ensure accuracy of timelines, forecasting and deliveries of components and materials. ● Documentation and Reporting: Generate inventory reports, including stock levels, usage, and trends. Maintain documentation related to inventory processes and transactions ● Process Improvement: Continuously evaluate and improve inventory control procedures and systems. Identify opportunities to enhance efficiency and reduce costs ● Compliance and Security: Ensure compliance with all relevant regulations and internal security protocols for handling sensitive materials. Safeguard inventory against theft, damage, and unauthorized access ● Collaboration: Collaborate with cross-functional teams, including procurement, production, and logistics, to ensure smooth operations. Communicate inventory-related issues and recommendations to management What You Bring To Us ● Prior experience in a stockroom, retail inventory, or warehouse setting is a plus, but not required. A background in a fast-paced environment where you had to track parts or supplies is ideal ● Strong analytical and problem-solving skills ● Excellent communication and interpersonal skills ● Detail-oriented with a commitment to accuracy ● Ability to work in a fast-paced, dynamic environment ● Knowledge of defense industry regulations and compliance standards is a plus What You’ll Need To Be Successful ● Skill in both verbal and written communication ● Prioritize and manage multiple tasks, changing priorities as necessary ● Work under pressure and adapt to changing requirements with a positive attitude ● Self‐motivated, proactive and an effective team player ● Interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, and others We Are Looking For Someone Who ● You are proactive and resourceful, you don’t wait for permission to solve problems. ● You are detail-oriented, but can zoom out and think strategically about systems and scalability. ● You have a hospitality mindset, you anticipate others’ needs and take pride in creating a welcoming and effective workspace. ● You thrive in a fast-paced, ambiguous environment, and you’re energized by building things from scratch. ● You’re excited to support a team of engineers and remove obstacles so they can focus on building. What We Offer ● Competitive salary ● ACS Equity Package ● Health, Dental, Vision Insurance ● Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionCompany Overview Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers and manufacturing professionals. Position Overview Allen Control Systems is seeking highly motivated Mechanical Assembly Technicians to support the assembly, testing, and troubleshooting of mechanical components and systems. This is an exciting ground-floor opportunity to join our core manufacturing team. We are interested in candidates of all skill levels—from entry-level to experienced professionals—and will provide comprehensive training as required to ensure your success. What You'll Do Assemble mechanical components and subassemblies according to technical drawings and specifications. Read and interpret CAD models or work Instructions to ensure accurate assembly and fit. Operate equipment and basic shop tools to fabricate or modify parts as needed. Collaborate with engineers to provide feedback on designs to enhance manufacturability and assembly efficiency. Perform functional testing and troubleshooting of assembled units to ensure proper operation. Maintain accurate documentation of assembly procedures, modifications, and test results. Adhere to company and industry quality and safety standards during all assembly processes. What You'll Need Experience: We welcome all skill levels, from recent graduates to seasoned professionals. 2+ years of experience in mechanical assembly, testing, and troubleshooting is preferred, we provide full, on-the-job training for motivated entry-level candidates. Exceptional attention to detail combined with strong problem-solving and diagnostic abilities. Highly collaborative team player who demonstrates self-motivation and a proactive, bias-for-action mindset. Strong commitment to ownership (taking "extreme ownership") and resourcefulness in meeting goals. Effective verbal communication skills for clear and professional interaction What We Offer Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced professionals. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders’ successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop have a real-world impact. Position Overview We are building our HR function from the ground up, and this role is central to making that happen. As our Senior HR Generalist, you will work directly alongside our VP of HR to design and establish the programs, processes, and infrastructure that define how we operate as a company and how we take care of our people. This is a build-from-scratch opportunity for someone energized by a blank page, who thinks strategically and is equally ready to roll up their sleeves and execute. What You’ll Do • Partner with the VP of HR to define the people strategy roadmap, assess current-state gaps, and build prioritized plans to close them, including the employee handbook, process guides, and compliance frameworks., • Own day-to-day benefits administration, enrollment coordination, and employee communications; build the education and support infrastructure so employees can fully access and understand their benefits., • Help design and implement our performance management philosophy, including review cycles, feedback structures, and goal-setting frameworks, along with the tools and templates managers need to run effective conversations., • Support the development of a compensation philosophy and structure, including job leveling, pay bands, and manager guidance, ensuring frameworks are fair, transparent, and defensible as we scale., • Develop and maintain HR policies that are legally sound and clearly written; monitor the regulatory landscape and flag changes that require policy or process updates., • Help define and operationalize our culture through engagement initiatives, pulse surveys, recognition programs, and feedback loops; serve as a trusted, approachable resource for employees at all levels., • Design and own the full onboarding experience from offer acceptance through the first 90 days, including the systems, checklists, and communications that make every new hire’s first week seamless; establish metrics and continuously improve the experience over time. What You’ll Need • 6+ years of progressive HR experience, with meaningful time in a startup, high-growth, or build-from-scratch environment., • Demonstrated experience helping design or establish HR programs from scratch, not just administering existing systems., • Strong working knowledge of benefits administration, including open enrollment, carrier management, and plan design basics., • Familiarity with building or operationalizing performance management and compensation frameworks., • Solid grasp of employment law and HR compliance fundamentals., • A strategic mindset paired with the willingness to do detailed, operational work; strong written communication skills for turning concepts into clear policies and process docs., • High trust, high discretion in handling sensitive information; SHRM-CP, PHR, or equivalent is a plus. What We Offer • Competitive salary, • ACS Equity Package, • Health, Dental, Vision Insurance, • Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description General Opportunities We're building something exciting and looking for passionate individuals to join us! As a fast-growing company, we offer opportunities across engineering, design, and more. With a tight-knit team, direct access to leadership, and a culture that values innovation and collaboration, this is your chance to make a real impact. Whether you're an experienced professional or an up-and-coming talent, we'd love to hear from you. Explore opportunities with us and help shape the future! Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous venture acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Ryan Herco Flow Solutions, a SunSource company, is a leading distributor of fluid control systems, fluid filtration systems, fluid handling products, micro-electronics, and general industrial supply. We sell to a broad base of customers in industries such as electronic component and equipment manufacturers, chemical manufacturers, water & waste treatment, metal finishing, pollution control and life sciences companies. www.rhfs.com Ryan Herco offers competitive pay and a comprehensive benefit plan including medical, dental, and vision insurance, vacation, sick leave, and holiday pay, a floating holiday, life insurance, tuition reimbursement, and a 401(k) with Company match. Our greatest benefit is the opportunity for career advancement! We promote from within and value employees who contribute to our company’s growth. Are you energized by solving problems, building relationships, and helping customers keep critical operations running smoothly? Join Ryan Herco Flow Solutions, a leader in fluid control, filtration, and handling systems, serving a diverse mix of industries—from electronics and chemicals to water treatment, metal finishing, and life sciences. If you want to grow your career while making a meaningful impact on your customers and team, this could be the perfect role for you. As a Field Sales Representative, you’ll be the face of our business—trusted advisor, problem solver, and solutions expert. Your mission is to strengthen relationships with existing customers while uncovering new opportunities for growth. In this role, you will: • Build and expand partnerships with key accounts in your territory, • Identify new prospects through current clients, referrals, and networking, • Keep customers informed on the latest products, applications, and solutions, • Support customers with product selection and provide training when needed, • Plan and execute a weekly sales schedule (aim for 5 quality visits per day), • Log customer interactions and sales activities in ACS (minimum of 3 times per week), • Collaborate daily with Inside Sales, your Regional Sales Manager, and teammates on strategy and problem-solving, • Continuously sharpen your technical knowledge and sales skills, • Represent Ryan Herco with professionalism and integrity, • HS diploma or equivalent, • Bachelor’s degree in a related field is preferred, • 2+ years of industrial field or outside sales experience, • Industrial sales background in fluid control, filtration, or fluid handling systems is highly preferred, • Valid driver’s license, • Strong communication, customer engagement, and presentation skills, • Ability to coordinate team efforts and lead training sessions, • Solid mechanical aptitude and comfort with basic math (decimals, fractions, algebra), • Quick learner, organized, and detail-oriented, • Proficiency with Microsoft Office (Word, Excel, PowerPoint) and ability to learn and use CRM applications, • Some overnight travel may be required, • Competitive pay, • Medical, dental, and vision insurance, • Paid vacation, sick time, holiday pay, and a floating holiday, • Life insurance, • Tuition reimbursement, • 401(k) with Company match, • Real career advancement—many of our leaders started exactly where you are, • Join a company that values your growth, empowers you to make an impact, and gives you the tools to succeed.We are an Equal Employment Opportunity Employer M/F/V/D. WE PARTICIPATE IN E-Verify. If you are an individual with a disability and require an accommodation to complete the application process, please contact to request reasonable accommodation. Only requests for accommodations in the application process will be returned. #rhfsasscWe may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Chiller Service Technician Dallas, Austin, or San Antonio, TX Join a Growing Leader in Data Center Cooling & HVAC Solutions Applied Climate Solutions (ACS) is a leading HVAC manufacturer's representative and building automation solutions provider serving building owners, engineers, and contractors throughout Texas. We are seeking an experienced Chiller Service Technician to support and sustain large-scale Data Center clients across Texas and National Account locations throughout the United States. This is an excellent opportunity for a highly skilled HVAC professional who enjoys travel, autonomy, advanced equipment, and long-term career growth within a rapidly expanding organization. Why Join ACS? Benefits & Opportunities • Competitive hourly pay of $45–$65 per hour, • National travel opportunities supporting hyperscale and enterprise data center clients, • Travel per diem provided, • Paid Health, Dental, and Vision Insurance for employees, • Retirement Plan, • 19 Days PTO, • Ongoing factory training and professional development, • Opportunity to work with advanced chiller and mission-critical cooling systems, • Career advancement opportunities within a growing organization, • High level of autonomy and responsibility Position Summary • The Chiller Service Technician will perform startup, warranty, maintenance, troubleshooting, repair, and operational support for commercial HVAC and chiller systems supporting National Account customers., • This position requires frequent travel for startup activities, factory training, warranty support, and service work on chiller systems and airside equipment throughout the United States., • The ideal candidate is a self-starter with strong diagnostic skills, extensive chiller experience, and the ability to work independently while delivering exceptional customer service. What You'll Do • Perform startup and warranty support for factory-supplied HVAC and cooling equipment, • Coordinate warranty claims with manufacturers and service partners, • Manage parts procurement and coordination with equipment manufacturers, • Diagnose, service, repair, and upgrade electronic control systems, including MCS controllers and VFDs, • Lead and coordinate large service projects involving subcontractors, materials, equipment, and scheduling, • Conduct mechanical and electrical inspections to ensure optimal system performance, • Perform preventive maintenance activities including cleaning, lubrication, belt adjustments, and equipment inspections, • Troubleshoot HVAC, chiller, refrigeration, and airside equipment issues, • Recommend corrective actions and preventive maintenance solutions to customers, • Identify and recommend additional service opportunities, • Assist in developing processes and procedures for the growing service department, • Represent ACS professionally with owners, contractors, engineers, and trade partners, • Complete service reports and documentation accurately and on time, • Participate in factory training programs and continuing education opportunities, • Travel extensively for National Account projects, service support, and manufacturer training Required Qualifications • Minimum 3+ years of experience working on commercial chillers and HVAC systems, • Strong knowledge of refrigeration cycles, HVAC equipment, and electrical systems, • Experience with startup, warranty support, maintenance, repair, and operation of commercial HVAC equipment, • Ability to diagnose equipment issues and perform complex repairs independently, • Experience servicing chillers, DX systems, and airside equipment, • Strong understanding of commercial HVAC service tools, methods, and best practices, • Ability to read blueprints, technical manuals, and equipment specifications, • Excellent customer communication and relationship-building skills, • Strong computer skills and experience utilizing HVAC software platforms, • Ability to manage time effectively and work independently, • Willingness and ability to travel throughout the United States Preferred Qualifications • HVAC technical certification or trade school education, • Texas HVAC Technician Registration, • HVAC Time Chiller Academy Certification, • Experience supporting mission-critical facilities or data centers, • Advanced controls experience including VFDs and electronic controller platforms, • Experience managing large service projects and subcontractors Physical Requirements • Ability to lift and carry HVAC tools, parts, and equipment, • Comfortable working in outdoor environments, mechanical rooms, rooftops, and confined spaces, • Ability to climb ladders and work at heights, • Ability to ascend and descend ladders, scaffolds, and stairs regularly, • Comfortable working around loud mechanical equipment and active jobsite conditions Compensation • $45–$65 per hour based on experience, • Overtime opportunities available, • Travel per diem provided, • Additional compensation opportunities based on experience, certifications, and data center expertise Benefits • Paid Medical, Dental, and Vision Insurance, • Retirement Plan, • 19 Days PTO, • Ongoing Factory Training & Professional Development, • Career Advancement Opportunities, • Travel Reimbursement and Per Diem Support Location • Dallas-Fort Worth, Austin, or San Antonio, Texas, • While candidates can be based in any of these markets, ACS has a strong preference for candidates located in the Dallas-Fort Worth area due to current customer demand and project concentration., • Extensive travel throughout Texas and the United States is expected to support National Account customers and mission-critical data center projects. This is an outstanding opportunity for an experienced HVAC Service Technician who wants to work on advanced chiller systems, support some of the nation's largest data center operators, and build a long-term career with a growing industry leader.

Job Description TECHNICIAN Handyman - Commercial – (General Carpentry, Electrical, Plumbing) Company Provided Vehicle & Phone JOB DESCRIPTION The Facility Maintenance Technician position is responsible for performing diversified duties to install, troubleshoot, repair, and maintain facilities according to safety, predictive, and productive maintenance systems and processes to support the achievement of the customer’s business goals and objectives. We are looking for candidates with excellent attitudes and someone who is willing to take care of the customer. We furnish a company vehicle, all fuel, vehicle maintenance, and a company Phone. We offer paid vacations, sick days, and paid holidays, and have voluntary plans in health insurance and ancillary insurance. If you are passionate about what you do and looking for a job then we want to talk to you. Essential Functions • Perform diversified duties to install and maintain facilities., • Provide emergency/unscheduled repairs to facilities and scheduled maintenance repairs of facilities., • Perform service repair duties and responsibilities., • Perform service skills including, but not limited to, carpentry, plumbing, electrical, troubleshooting, and repair of facilities., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on facilities., • Perform a variety of electrical, plumbing, carpentry maintenance functions., • Use a variety of hand and power tools, meters, and material handling equipment in performing duties., • Detect faulty operations, defective material and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas., • Be able to effectively communicate and use phones (phones company provided), • Must be able to use apps in phone (phones company provided), • Must be able to turn in all applicable paperwork for each work order (ie. before and after photos, signed and stamped work orders, etc.), • Must maintain regular work attendance habits / good work attendance habits., • Have availability for work., • Must be able to drive from service to service. (Company Provided Vehicle). Competencies • Technical Capacity., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Good Attendance Habits. Work Environment Work is regularly performed in a combination of office, warehouse, outdoor, and shop environments and is regularly exposed to dust, odors, oil, fumes, and noise. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Position Type/Expected Hours of Work • This is a Reactive to Service Calls type job. There is On-Call Duty on scheduled rotations. Travel • Travel is expected for this position. (Must have a valid updated driver's license) (Must be able to drive). (Must also be able to be insurable by the company's auto insurance company.) Required Education and Experience • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience. Preferred Education and Experience • 2+ years of Commercial Experience in plumbing, carpentry, handyman, electrical Additional Eligibility Qualifications • You must possess a strong background in at least two of the following skill sets:, • Plumbing, Electrical, Drywall Repairs, Painting, Flooring, Carpentry, Locks, • You must furnish your own hand tools, power tools, and must be able to pass a drug screen and background check. AAP/EEO Statement As an equal opportunity employer, ACS Commercial Services, L.L.C. does not discriminate in its employment decisions on the basis of race, religion, color, national origin, gender, sexual orientation, age, military status, disability, or on any other basis that would be in violation of any applicable federal, state, or local law. Furthermore, ACS Commercial Services, L.L.C. will make reasonable accommodations for qualified individuals with known disabilities unless doing so would result in an undue hardship, safety, and/or health risk. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Job Type: Full-time

Austin, TX Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. We are seeking a highly skilled electrical designer with strong expertise in schematic design, electrical simulation, printed circuit board (PCB) design, and firmware development in C++. The ideal candidate will play a critical role in developing robust, high-performance electrical systems that integrate seamlessly with our electromechanical components, helping to ensure our products meet rigorous military-grade requirements. The ideal candidate would contribute to both power and embedded design for our highly dynamic robotic systems. In addition, this person would contribute to developing, optimizing, and implementing embedded software for real-time control of our systems. What You'll Do: • Design and Develop Electrical Systems: Create detailed electrical schematics and PCB layouts that meet performance and durability requirements for autonomous turret systems including embedded and power circuits., • Develop Real-Time Embedded Software: Design and implement embedded software in C++ and Python, focusing on real-time responsiveness and efficiency for autonomous defense applications., • Simulation and Testing: Perform simulations for signal integrity, thermal management, and electromagnetic compatibility (EMC) to ensure robust and reliable designs., • Electromechanical Integration: Collaborate closely with mechanical and software teams to integrate electrical and mechanical components, ensuring optimal performance and reliability in harsh environments., • PCB Design: Lead the development of high-quality printed circuit boards, adhering to best practices in layout, signal integrity, power distribution, and EMC considerations per military standards., • Documentation and Reporting: Develop and maintain detailed documentation of designs, including schematics, PCB layouts, simulation results, and test protocols., • Test and Debug Embedded Systems: Conduct extensive testing, simulation, and debugging in both lab and field environments, troubleshooting and optimizing electronics and software for various real-world conditions., • Performance Optimization: Continuously improve code performance and reduce power consumption to maximize system efficiency on hardware-constrained platforms. What You'll Need: • Educational Background: Bachelor's or Master's degree in Electrical Engineering or a related field., • Embedded circuit design: Knowledge of microcontroller-based control systems including power conversion and motor drive., • Schematic Design & PCB Layout: Expertise with electrical design and PCB layout tools such as Altium Designer, OrCAD, or Eagle., • Simulation Tools: Proficiency with simulation software (e.g., SPICE, ANSYS Electronics) for evaluating circuit behavior under various environmental and operational stresses., • Electromechanical Integration: Proven experience integrating electrical components with mechanical systems, such as sensors, motors, and actuators., • Testing and Validation: Hands-on experience with testing methodologies, equipment, and protocols for validation of designs against military standards., • Strong Background in Embedded Software: experience in embedded software development with a focus on real-time, safety-critical systems., • Proficiency in C++ and Python: Extensive experience in C++ for embedded systems, with additional proficiency in Python for scripting and development., • Experience with Real-Time Robotics Systems: Hands-on experience designing and deploying software for robotics applications, with a focus on real-time control and responsiveness., • Systems Integration: Ability to integrate software with various sensors, actuators, and control hardware in robotic and autonomous systems., • Educational Background: Bachelor's or Master's degree in Computer Science, Electrical Engineering, or a related field. You'll Stand Out: • Thermal Management Expertise: Knowledge of techniques and materials used in heat dissipation and thermal design for high-power systems., • Embedded Linux Experience: Familiarity with embedded Linux and RTOS environments, as well as experience building custom kernels for embedded platforms., • Networking and Communication Protocols: Knowledge of networking protocols (e.g., TCP/IP, UDP) and communication protocols used in robotics systems (e.g., CAN, UART, I2C)., • High-Performance Embedded Systems: Skills in optimizing code for low-latency, high-performance applications with strict power and computational constraints. What We Offer: • Competitive salary, • ACS Equity Package, • Health, Dental, Vision Insurance, • Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

707 - 7:00p-7:00a 13 weeks nights 7p-7a, L&d, Acs, Nrp, Bls, Awhon Ifm, No Call Required

Austin, TX Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Allen Control Systems is seeking a highly skilled Quality Inspector to support the inspection, testing, and quality analysis. The ideal candidate has a strong eye for detail, technical aptitude, and a commitment to upholding excellence in a fast-paced production environment. What You'll Do: • Perform visual, dimensional, and functional inspections of machined parts and assemblies using tools such as calipers, micrometers, height gauges, and coordinate measuring machines (CMMs)., • Verify conformance to engineering drawings, blueprints, and tolerances, including geometric dimensioning and tolerancing (GD&T) requirements., • Document inspection results, identify non-conformances, and initiate quarantine procedures for defective items while notifying relevant teams., • Conduct first article inspections (FAI) and support supplier quality audits to ensure incoming materials meet specifications., • Maintain inspection equipment through routine calibration and troubleshooting to guarantee measurement accuracy., • Collaborate with production, engineering, and quality teams to resolve issues, track trends, and contribute to continuous improvement efforts., • Generate reports on quality metrics, such as defect rates and yield, using basic data analysis tools. What You'll Need: • Education: Associate's or Bachelor's degree in Engineering field., • Experience: Minimum of 4 years of experience in quality inspection within a manufacturing or assembly setting., • Proficiency with precision measurement tools and reading technical drawings/blueprints., • Basic understanding of quality standards like ISO 9001 and statistical process control (SPC)., • Strong attention to detail, manual dexterity, and ability to work independently or in a team., • Certification as a Certified Quality Inspector (CQI) from ASQ or similar., • Experience with CMM programming (e.g., PC-DMIS) or automated inspection systems., • Familiarity with non-conformance reporting (NCR), material review boards (MRB), and corrective action processes (CAR). What We Offer: • Competitive salary, • ACS Equity Package, • Health, Dental, and Vision Insurance, • Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing an autonomous gun turret using advanced computer vision and control systems to precisely detect, track, and neutralize enemy drones. Position Overview Allen Control Systems is seeking highly motivated Electronics Assembly/Avionics Technicians to support the assembly, testing, and troubleshooting of electronic systems. This is an exciting ground-floor opportunity to join our core manufacturing team. We are interested in candidates of all skill levels—from entry-level to experienced professionals—and will provide comprehensive training as required to ensure your success. Additional Details Openings available for First Shift, Second Shift and Weekend Shifts What You'll Do Assemble and solder electronic components onto printed circuit boards (PCBs) in accordance with industry standards. Fabricate and terminate cables, wiring harnesses, and connectors for electronic systems. Perform functional testing, troubleshooting, and debugging of electrical and electronic circuits. Read and interpret electrical schematics, wiring diagrams, and engineering drawings. Operate test equipment such as oscilloscopes, multimeters, and signal generators. Assist engineers in the development and refinement of electronic prototypes and production units. Create and maintain accurate documentation of testing procedures, modifications, and system repairs. Contribute to SOP’s and relevant production documentation as they are created Adhere to company and industry quality and safety standards when handling electronic components and assemblies. What You'll Need Experience: We welcome all skill levels, from recent graduates to seasoned professionals. 2+ years of experience in electronics assembly, testing, and troubleshooting is preferred, we provide full, on-the-job training for motivated entry-level candidates. Exceptional attention to detail combined with strong problem-solving and diagnostic abilities. Highly collaborative team player who demonstrates self-motivation and a proactive, bias-for-action mindset. Strong commitment to ownership (taking "extreme ownership") and resourcefulness in meeting goals. Effective verbal communication skills for clear and professional interaction IPC-A-620 and/or IPC-A-610 will make you stand out as a candidate What We Offer Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #ZR

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous venture acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview We' are seeking a Software Systems-Integration Engineer to connect our platform to the outside world. In this role you will be responsible for integrating third-party sensors, wiring in sensor fusion and tracking, and building the external API that command-and-control systems and partners consume. What You'll Do Integrate third-party sensors (radar, RF, EO/IR) into the platform. Integrate sensor fusion and the nearby-target tracker output from the Perception team. Design and build the external API for consumption by command-and-control and partner systems. Own networking, transport, and messaging between subsystems and external consumers. Build and maintain command-and-control (C2) integrations. What You'll Need (swap into the core) Bachelor's or Master's degree in Computer Science, Software Engineering, or a related field. Strong proficiency in C++ and Python. Solid networking fundamentals (TCP/IP, sockets, real-world protocol debugging). Experience designing or consuming APIs and integrating heterogeneous systems. Distributed-systems fundamentals. You'll Stand Out API design across REST, WebSockets/SSE, and gRPC/protobuf. Pub/sub and middleware (Zenoh, DDS, ROS 2, MQTT). Sensor / radar / RF integration experience. Defense C2 standards or interoperability work. What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview: Allen Control Systems is seeking a highly skilled Quality Engineer to support the inspection, testing, and quality analysis. The ideal candidate will have experience in inspection test equipment, root cause analysis, and statistical analysis. What You'll Do: Develop and maintain quality management systems (QMS), including procedures for inspections, testing, and compliance with standards like ISO 9001 or AS9100, to ensure consistent product integrity across operations. Design, fabricate, and implement custom inspection tooling and fixtures to facilitate accurate and efficient measurement of machined parts. Program, set up, and operate CMMs using software such as PC-DMIS or similar to perform complex dimensional and geometric inspections. Conduct visual, dimensional, and functional inspections of incoming machined parts using advanced precision tools, including calipers, micrometers, height gauges, and optical comparators. Verify part conformance to engineering drawings, tolerances, and quality requirements, with in-depth application of geometric dimensioning and tolerancing (GD&T). Identify and document defects, non-conformances, or discrepancies; quarantine unacceptable parts and collaborate with suppliers on root cause analysis and corrective actions. Maintain accurate inspection records, generate detailed reports on inspection results using data analysis tools, and track quality trends to drive supplier improvements. Collaborate with engineers, procurement, production, and design teams to resolve technical issues and optimize inspection processes. Perform routine calibration, maintenance, and troubleshooting of inspection equipment, including CMMs, to uphold measurement accuracy and reliability. What You'll Need: Education: Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related technical field. Experience: Minimum of 3 years of experience in quality inspection, preferably with machined or metal components in a manufacturing environment. Proficiency with inspection tools and reading technical documents. Proficiency in quality standards and workflow including NCR’s, MRB’s, RCA, and CAR’s Proficiency in CMM programming and operation, as well as reading and interpreting complex technical drawings and GD&T standards. Basic knowledge of quality standards such as ISO 9001 or AS9100. Strong attention to detail and ability to work independently in a fast-paced inspection lab and manufacturing setting. What We Offer: Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing an autonomous gun turret using advanced computer vision and control systems to precisely detect, track, and neutralize enemy drones. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders’ successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. About The Role We are looking for a Manufacturing Finance Manager to join our team. ACS is scaling Bullfrog production from initial units to hundreds of systems per year, under contract with SOCOM, the U.S. Army, and customers across six countries. The cash mechanics of a hardware production ramp are complex, and getting them right is mission-critical. This role reports to the CFO and works daily with operations and supply chain. You will own our rolling cash forecast, CapEx planning, and working capital modeling, grounded in actual production schedules and contract payment mechanics. If you have done this at a scaled hardware company, we want to talk. What You’ll Do Own the rolling 13-week cash forecast, updated weekly, grounded in sales and operational planning, supplier payment terms, delivery schedules and contract milestones. Extend the cash model to 90-day and 180-day horizons with scenario analysis covering production acceleration, delivery slippage, and contract deposit delays. Build and maintain the CapEx plan: what equipment we need, when we need it given production lead times, what it costs, and how it phases against our cash balance and debt facility availability. Model working capital dynamics as production scales: component procurement timing, inventory build-up ahead of deliveries, WIP balances, and the cash conversion cycle at various production rates. Partner with supply chain on supplier payment terms, deposit requirements, and the cash implications of BOM changes or supplier transitions. Provide weekly cash and liquidity reporting to the CEO and CFO; flag risks and opportunities early and support contract negotiations with financial modeling on payment structures and working capital impact. What You’ll Need Has built rolling cash forecasts for a hardware manufacturing business, grounded in production schedules and supply chain mechanics rather than revenue models; this is the core skill and will be probed in the interview. Understands the cash mechanics of manufacturing scale-up: component lead times, supplier deposits, inventory build, WIP, and the gap between cash out and cash in on a production-to-delivery cycle. Direct experience with CapEx planning for manufacturing operations; modeling the timing and cash impact of equipment purchases against production requirements, not just summarizing a budget. Strong financial modeling skills including scenario analysis, sensitivity analysis, and the ability to rebuild a model quickly when the production plan changes. Background at a scaled hardware company in defense, aerospace, robotics, industrial manufacturing, or an adjacent field; someone who has seen what a production ramp actually does to a balance sheet. Comfortable using AI tools for financial modeling and analysis; we will ask how in the interview. On-site in Austin, TX. You’ll Stand Out Experience with government contract payment mechanics including milestone billing, progress payments, and FMS deposit structures. Familiarity with debt facility management including draw mechanics, covenant tracking, and borrowing base. Has modeled working capital for a business with significant inventory and long supplier lead times. Experience at a company that scaled through a major equity raise and had to manage liquidity through the transition. What We Offer Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview We are seeking an experienced safety professional to lead and scale our manufacturing safety program. This role will own the development, implementation, and continuous improvement of safety policies, training, compliance systems, and hazard controls across our facility. Our work involves industrial manufacturing processes, hazardous materials, high-energy systems, and emerging weapons-related technologies—so this role requires strong judgment, technical credibility, and the confidence to stop unsafe work when necessary. This is a hands-on leadership position. You will spend time on the production floor, working directly with manufacturing, engineering, and leadership to proactively identify risks, strengthen safeguards, and build a culture where safety is a shared responsibility. What You’ll Do: Safety Program Leadership Own and formalize the company-wide safety program, policies, and procedures Ensure compliance with OSHA and all applicable federal, state, and local regulations Establish and maintain a strong safety culture and stop-work authority framework Serve as the primary point of contact for regulatory agencies and inspections Hazard Analysis & Risk Management Lead hazard analyses and safety studies for manufacturing processes (e.g., MIL-STD-882 or similar methodologies) Partner with engineering to implement “design for safety” principles Oversee Lockout/Tagout (LOTO), lift limits, machine guarding, and keep-out zones Evaluate and mitigate risks associated with high-power lasers (ANSI Z136.1), industrial equipment, and future explosive ordnance integration Specialized Safety Oversight Develop safety protocols for firearms handling, weapons integration, and explosive materials (as applicable to future programs) Support safe planning and execution of field-testing activities Oversee chemical safety, storage, disposal, and digital SDS systems Ensure appropriate PPE programs, respiratory protection, and facility zoning Emergency Preparedness & Incident Response Develop and maintain emergency action plans, evacuation maps, and muster procedures Oversee fire protection systems, extinguisher programs, and drill coordination Establish and manage incident reporting and corrective action processes Coordinate first aid, AED, trauma kits, and responder training Training & Documentation Implement and manage a structured safety training program Oversee machine-specific, forklift, laser, and specialized safety training Maintain training documentation and compliance records Lead regular safety meetings and reporting cadence Continuous Improvement Analyze safety metrics, near-misses, and observations Drive corrective actions and long-term preventative measures Continuously elevate safety standards as operations evolve What You’ll Need: Minimum 5+ years of experience as a safety professional in an industrial or manufacturing environment Strong working knowledge of OSHA 29 CFR 1910 (General Industry) Experience developing and implementing safety programs in high-risk environments Experience conducting hazard analyses and risk assessments Experience supporting field testing operations Strong communication skills and ability to influence at all levels of the organization Ability and willingness to spend significant time on the production floor Certified Safety Professional (CSP) or equivalent certification Experience with explosives or ordnance safety Firearms safety experience Experience applying MIL-STD-882 or similar system safety frameworks Experience with high-power laser safety standards (ANSI Z136.1, MIL-HDBK-828) Experience in defense, aerospace, or other highly regulated industries What We Offer: Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders’ successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop have a real-world impact. Position Overview We are seeking a skilled Mechanical Technician to support the hands-on build, test, and iteration of prototype hardware at ACS. Working directly alongside our mechanical and electrical engineers, you will play a central role in the R&D process, helping bring early-stage designs to life, identifying failure modes, and feeding real-world findings back into the development cycle. What You’ll Do Build and integrate prototype mechanical assemblies from engineering drawings, CAD models, and work instructions, with an emphasis on speed-to-test and iterative refinement. Conduct functional and performance testing on prototype hardware, collect data, and clearly document results to support engineering analysis and design decisions. Troubleshoot mechanical failures and anomalies on prototype systems, identifying root causes and working with engineers to implement fixes quickly. Operate hand tools, power tools, and basic shop equipment to fabricate, modify, or rework parts and assemblies as the design evolves. Collaborate directly with mechanical and electrical engineers to provide hands-on feedback that improves design for assembly, reliability, and testability. Maintain accurate records of build procedures, test results, modifications, and known issues to support the broader R&D team. Uphold safety and quality standards in the lab and shop environment at all times. What You’ll Need 2+ years of experience in mechanical assembly, testing, or hands-on R&D support; we welcome all skill levels and provide full on-the-job training for motivated candidates. Comfort working in a fast-paced prototype environment where designs change frequently and problem-solving on the fly is the norm. Ability to read and interpret engineering drawings and CAD models to guide hands-on build and assembly work. Strong attention to detail and diagnostic skills, with a genuine curiosity for understanding how things work and why they fail. Collaborative team player who communicates clearly with engineers and takes ownership of tasks from start to finish. What We Offer Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing an autonomous gun turret using advanced computer vision and control systems to precisely detect, track, and neutralize enemy drones. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders’ successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. About The Role We are looking for a Power Electronics Engineer with deep expertise in power conversion hardware, PCB design, and electromechanical systems. You will design and build the high-performance power electronics that drive our autonomous platforms from schematic capture and board layout through bring-up, validation, and field integration-working closely with firmware, mechanical, and systems teams. What You’ll Do Design and develop power conversion circuits—including switch-mode DC/DC converters (buck, boost, flyback, PSFB), gate driver stages, and motor drive circuits—using SiFET and GaN FET technology for high-efficiency, high-reliability applications. Own schematic capture and multi-layer PCB layout in Altium Designer for power and mixed-signal boards, with rigorous attention to power loop minimization, EMC, thermal management, and signal integrity. Lead hardware bring-up from power-on through closed-loop validation; characterize switching waveforms, debug gate driver behavior, and verify power stage performance using oscilloscopes, power analyzers, and logic analyzers. Run SPICE-based simulations (LTspice, PSIM, or SIMPLIS) for power stage design, transient analysis, and control loop modeling; perform thermal analysis to validate designs before fabrication. Lead EMI/EMC debugging and design to meet radiated and conducted emissions requirements; support qualification testing against applicable military or commercial standards. Collaborate with firmware engineers to define and validate digital control interfaces for power and motor drive systems, and work with mechanical teams to ensure thermal and structural integration. Maintain thorough design documentation including schematics, layout rationale, simulation results, BOM, and test protocols. What You’ll Need 3+ years of hands-on experience designing switch-mode power conversion circuits, including topology selection, magnetics design, and gate driver implementation for SiFET or GaN-based systems. Demonstrated experience with BLDC or PMSM motor drive hardware—phase current sensing, gate driver selection, protection circuitry—from schematic through bring-up. Strong command of Altium Designer (or comparable EDA tool) for multi-layer mixed-signal and power PCB design; solid understanding of EMC design practices, power loop layout, and high-current trace routing. Proficiency with SPICE-based simulation tools (LTspice, PSIM, SIMPLIS, or equivalent) for power circuit validation and control loop analysis prior to fabrication. Hands-on EMI/EMC debugging experience; ability to identify root causes of conducted and radiated emissions and implement effective design fixes. Skilled use of oscilloscopes, power analyzers, logic analyzers, and bench power supplies for hardware characterization, bring-up, and debug. Bachelor’s or Master’s degree in Electrical Engineering or closely related field. You’ll Stand Out Experience with digitally controlled power converters using DSP or microcontroller platforms (e.g., TI C2000, STM32) including implementation of digital compensators or current sharing algorithms in Verilog or C. Familiarity with magnetics design—custom inductor and transformer specification, core selection, and winding layout. Thermal management experience: heat sink selection, thermal interface material specification, and steady-state thermal simulation. Background in high-reliability, defense, aerospace, or space electronics where design verification, documentation, and environmental qualification are non-negotiable. Experience taking a power electronics design through full EMI/EMC certification (class A or B radiated and conducted). Knowledge of communication and control protocols common in embedded systems: CAN, SPI, I2C, UART. What We Offer Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job Description EMS, ADMS, OMS and Energy Markets Consultants Remote with Travel Duration: 12 months C2C is Not Available MWResource supplies our customers in the utility electric power industry with the resources they need to manage some of their most complex systems. We work and partner with leaders in the industry, and because the skill and experience of our resources are in high demand, our company has been doubling each year and is already forecast to do so again next year. MWResource has opportunities for experienced Energy Management System (EMS), Distribution Management System (DMS), and Energy Market Systems Consultants of all levels to support our clients across the US and Canada. These roles are both short and long-term contracts. Most contracts are fulltime positions embedded within the customer's EMS, DMS, or OMS team that require the consultant to be onsite at the customer location 100% for the length of the contract. Some are remote or part-time opportunities. Customers are typically large investor owned utilities with ALSTOM/GE systems. We also support customers with ABB, ACS, OSI, Schneider, and Siemens EMS, ADMS, OMS, and market systems. We also offer OSI PI Historian support. Currently we are specifically looking for consultants experienced in one or more of the following: • ALSTOM/GE EMS, DMS, and Market Systems Integration, development, support and project management, • GE PowerOn Integration, Database Management, and Display Building, • OSI Monarch Integration, Database Management, Display Building, and Support, • ABB Network Manager, • GE e-terrascada, • GE e-terrasource Integration and/or Modelling, • GE WebFG Display Building, • GE e-terrahabitat /e-terraplatform application development/migration, • GE e-terraplatform network applications (RTNET and STNET), • EMS Advanced Application (Powerflow, State Estimator, Contingency Analysis), • EMS, DMS and Market Application development, • DevOps - AWS, Docker, Jenkins, Kubernetes, • CIP/control center systems, especially SCADA, Outage Management Systems (OMS), Energy Management Systems (EMS) and Distribution Management Systems (DMS), • Expertise in AGC (Automatic Generation Control) and e-terra network applications, • Siemens ABB, • Siemens Spectrum Series 3 Experienced engineers are in high demand in the industry and there are more opportunities than consultants currently. Experienced consultants consider consulting because it offers more opportunities to expand their experience along with increased financial potential. Our consultants love working for us. For new engineers, consulting is a great opportunity to gain experience in the industry that is valuable to our customers. A large number of our junior engineers are offered fulltime positions with our customers at the end of their contracts and we are fine with whatever is in the best interest of our consultants. Please apply for more details and the location of current opportunities. MWResource, Inc (in the USA) and MWResource Consulting,Inc. (in Canada) provide our customers with the experienced critical utility IT infrastructure system resources they need to assist and mentor their staff in designing, implementing, and maintaining successful critical energy infrastructure systems. We specialize in EMS, DMS, and Energy Markets system experts. Our company offers a pool of experienced energy industry experts who have worked with data acquisition, plant and grid control, energy markets, settlements and IT technologies used by power generation companies, power cooperatives, municipal utilities, investor owned utilities, major energy markets, and major system vendors. We also assist our clients in recruiting full-time resources. You can also follow us on LinkedIn to hear about our latest opportunities. Currently, opportunities are open for: • Contract positions, • Fulltime position Requirements Candidates must have prior experience working on utility EMS, DMS, or Energy Market systems or related college courses/degrees. Benefits MWResource does not discriminate based on race, sex, color, religion, national origin, age, disability, veteran status, or anything else that makes you part of any group. MWResource offers medical, dental and vision coverage through Florida Blue, life insurance, short and long-term disability, and participation in the MWResource 401K plan for US based consultants. Candidates must be authorized to work in the United States. Candidates will be required to pass a background check and drug screening. Please note we are not open to outsourcing our recruitment needs.

Job DescriptionCompany Overview Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview Allen Control Systems is seeking a highly skilled Electronics Technician to support the assembly, testing, and troubleshooting of electronic systems. The ideal candidate will have experience in soldering, cable fabrication, and circuit debugging, as well as a strong understanding of electrical schematics and test equipment. What You'll Do Assemble and solder electronic components onto printed circuit boards (PCBs) in accordance with industry standards. Fabricate and terminate cables, wiring harnesses, and connectors for electronic systems. Perform functional testing, troubleshooting, and debugging of electrical and electronic circuits. Read and interpret electrical schematics, wiring diagrams, and engineering drawings. Operate test equipment such as oscilloscopes, multimeters, and signal generators. Assist engineers in the development and refinement of electronic prototypes and production units. Create and maintain accurate documentation of testing procedures, modifications, and system repairs. Adhere to company and industry quality and safety standards when handling electronic components and assemblies. What You'll Need Education: Associate’s or Bachelor’s degree in Electrical Engineering Technology, Electronics Engineering Technology, or a related field. Experience: Minimum of 2 years of experience in electronics assembly, testing, and troubleshooting preferred. Proficiency in soldering and PCB rework (through-hole and surface-mount). Strong cable-making and wiring harness assembly skills. Experience with circuit debugging and troubleshooting techniques. Ability to read and interpret technical schematics and blueprints. Familiarity with electronic test equipment and diagnostic tools. Strong attention to detail and problem-solving abilities. Understanding of industry safety procedures related to electronic assembly and repair. What We Offer Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing an autonomous gun turret using advanced computer vision and control systems to precisely detect, track, and neutralize enemy drones. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders’ successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. About The Role We are looking for a Manufacturing Engineer to join the Mechanical Engineering team and serve as the primary bridge between product design and manufacturing execution. You will act as the manufacturability specialist within the ME team, owning DFM, tooling strategy, and supplier integration. This is a hands-on role focused on enabling efficient production through design influence, tooling development, and cross-functional leadership, rather than direct ownership of factory operations. What You’ll Do Partner with mechanical design engineers to drive DFM, DFA, and DFT from early concept through production; define critical features, tolerances, and inspection strategies in collaboration with Quality. Design, develop, and validate production tooling, fixtures, and test equipment; create manufacturing process concepts and support transition from prototype builds to production by establishing repeatable, controlled processes. Serve as the primary ME interface to suppliers for fabrication, machining, casting, and assembly; evaluate supplier capabilities, drive DFM feedback loops, and develop and review supplier documentation including drawings, work instructions, and inspection requirements. Act as the first-line technical resource for Manufacturing and Quality on design-related questions; support root cause investigations using structured methods such as 8D or Fishbone analysis. Define critical manufacturing and inspection processes including key parameters and acceptance criteria; support validation activities such as FMEA, process capability studies, and Gauge R track manufacturability issues and feed lessons learned back into design standards. What You’ll Need Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related field. 5+ years of manufacturing engineering experience with a focus on process design, equipment integration, and analysis in a systems or electronics manufacturing environment. Strong background in DFM/DFA and tolerance analysis; experience designing tooling, fixtures, and test equipment. Hands-on familiarity with fabrication methods including machining, sheet metal, casting, and 3D printing; experience working directly with suppliers and contract manufacturers. Ability to read, critique, and influence engineering drawings and GD working knowledge of quality standards such as ISO 9001 or AS9100. What We Offer Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing an autonomous gun turret using advanced computer vision and control systems to precisely detect, track, and neutralize enemy drones. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders’ successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. About The Role We are looking for an Associate Mechanical Engineer to join the ACS team and contribute to the design and development of our autonomous counter-drone platform. This is an early-career role well suited for a recent graduate or engineer with up to 2 years of experience who has a strong foundation in mechanical design, simulation, and electromechanical integration. You will work alongside senior engineers on real hardware that operates in demanding environments, learning fast and contributing from day one. What You’ll Do Support design and development of mechanical systems under MIL-STD-810 specifications, including robustness under vibration, shock, thermal, and environmental conditions. Run mechanical simulations including FEA, modal, vibration, and thermal analysis to assess durability and reliability of designs under operational stress. Collaborate with electrical and systems engineers to integrate electromechanical components including wiring harnesses, sensors, and actuators into mechanical structures. Support prototype development, testing, and validation; help develop and document mechanical design specifications, drawings, simulation reports, and test protocols. Participate in cross-functional design reviews, applying DFM and DFR principles and helping identify mechanical and electromechanical risks early in the development cycle. What You’ll Need Bachelor’s or Master’s degree in Mechanical Engineering or a related field. Proficiency in 3D CAD software such as SolidWorks (preferred), CATIA, or Creo; coursework or hands-on experience with FEA, modal, and thermal simulation tools such as ANSYS or SolidWorks Simulation. Foundational understanding of MIL-STD-810 requirements for mechanical durability including vibration, shock, temperature, and humidity testing. Interest in electromechanical integration and an eagerness to learn how mechanical structures interact with electrical systems such as sensors, actuators, and wiring harnesses. A passion for designing robust mechanical systems for harsh environments and a strong desire to work on hardware that has real-world defense impact. You’ll Stand Out Any direct exposure to MIL-STD-810 testing such as vibration, temperature, or shock, including through coursework, internships, or research projects. Familiarity with EMC considerations in mechanical design, or awareness of MIL-STD-461 and MIL-S-901D standards. Hands-on experience with rapid prototyping or additive manufacturing through personal projects, capstone work, or internships. Background or interest in fluid dynamics, heat transfer, or shock absorption systems. What We Offer Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing an autonomous gun turret using advanced computer vision and control systems to precisely detect, track, and neutralize enemy drones. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. About The Role: We are looking for a Systems Reliability Engineer to join our team, focusing on system-level reliability, verification, and risk reduction for our next-generation autonomous weapon platforms. This role sits closer to systems engineering than a traditional full-time reliability function and is responsible for defining how we evaluate system performance, analyze test data, identify failure modes, and drive clear pass/fail conclusions across hardware and software. The ideal candidate is hands-on, technically rigorous, and able to own the full loop from test planning through analysis, with particular strength in structured validation, environmental and performance testing, and safety-minded systems thinking. What You'll Do: Define system-level reliability goals, risk-based verification priorities, and failure-focused evaluation criteria for autonomous weapon platforms. Identify reliability-critical tests, stress cases, and operating conditions needed to expose failure modes before fielding. Analyze test and field data to identify failure modes, performance limits, degradation patterns, and reliability risks, and translate results into clear technical conclusions and recommended actions. Lead structured root-cause investigations for reliability failures across electrical, mechanical, software, and controls interfaces. Develop methods for reliability trending, failure categorization, and corrective-action tracking so the team can measure reliability growth over time. Support requirements verification by ensuring reliability risks, failure criteria, and hazard-informed concerns are reflected in system requirements and verification methods. Work with systems, mechanical, electrical, and software engineers to improve design robustness, observability, maintainability, and failure tolerance. Help define corrective actions, retest plans, and closure criteria for reliability-related issues. Contribute to hazard, risk, and mishap-informed engineering work, including reliability-focused systems analysis aligned with MIL-HDBK-781 style thinking. Drive a stronger reliability culture by improving failure ownership, analysis quality, corrective-action discipline, and technical follow-through across programs. What You'll Need: Bachelor's or Master's degree in Engineering or a related technical field. 3+ years of experience in reliability engineering, systems engineering, failure analysis, verification, or engineering analysis. Familiarity with MIL-STD-882 or comparable system safety and risk-analysis frameworks. Experience identifying failure modes, reliability risks, and corrective actions from test or field data. Experience with environmental, performance, qualification, or durability-style testing and the practical challenges of collecting useful data in real test conditions. Comfort working across mechanical, electrical, software, and systems teams to improve reliability and technical rigor. You'll Stand Out: Comfort working in a fast-paced startup environment with high ownership, incomplete information, and cross-functional technical responsibility. Proven track record of improving reliability, failure response, or risk-informed engineering rigor in mission-critical systems. Experience with requirements management in JAMA or DOORS. Experience developing reliability measures such as MTBF and Operational Availability. Intellectual curiosity driving you to consistently find failure patterns and weak assumptions that others would miss. What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing an autonomous gun turret using advanced computer vision and control systems to precisely detect, track, and neutralize enemy drones. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. About The Role: We are looking for a Systems Engineer to join our team and help architect, define, and mature our next-generation autonomous weapon platforms. In this role, you will turn high-level mission and product objectives into clear requirements, interfaces, verification plans, and technical decisions that guide development across hardware and software. You will work cross-functionally with design, controls, software, test, and operations teams to drive alignment, manage system-level tradeoffs, and ensure the overall system performs as intended. The ideal candidate is technically rigorous, highly collaborative, and excited to bring structure and clarity to complex, fast-moving engineering programs. What You'll Do: Own the full requirements management and verification process for complex autonomous systems, from requirement definition through verification closure. Translate program goals, customer needs, and technical constraints into clear, testable system and subsystem requirements. Define verification strategies, methods, and pass/fail criteria before testing begins, and ensure each requirement has an explicit path to closure. Drive requirement decomposition, traceability, and alignment across mechanical, electrical, software, controls, and operations teams. Work closely with test and design engineers to ensure verification activities produce usable evidence and defensible engineering conclusions. Identify gaps in requirements, verification coverage, and technical ownership early, and drive cross-functional resolution before they become program risks. Review test results, engineering analyses, and system behavior to determine whether requirements have been satisfied or need refinement. Help structure design reviews, verification reviews, and technical decision-making around clear evidence rather than informal status. Support system integration and issue triage by connecting observed behavior back to system requirements and expected behavior. Manage technical risks and conduct engineering trade studies. Develop Operations and Maintenance manuals to enforce continuous improvement and align requirements with design processes. Raise the bar on technical rigor by ensuring the team knows what must be proven, how it will be proven, and what evidence counts as success What You'll Need: Bachelor's or Master's degree in Engineering or a related technical field. 3+ years of experience in systems engineering, requirements management, verification planning, or multidisciplinary product development. Experience writing clear, testable technical requirements and defining practical verification approaches. Strong understanding of system integration across hardware and software, including the challenges of cross-functional technical ownership. Ability to evaluate test results, engineering analyses, and other technical evidence against requirement intent. Strong written and verbal communication skills, with the ability to align teams around clear technical expectations. Comfort operating in a fast-paced environment with incomplete information, changing priorities, and high ownership. Experience working across mechanical, electrical, software, and test teams to drive technical closure You'll Stand Out: Strong systems thinking with the ability to see where interfaces, assumptions, or missing requirements are likely to create downstream problems. A track record of turning ambiguous technical goals into structured requirements, verification plans, and closure criteria. Comfort pushing for clarity when ownership, pass/fail criteria, or verification evidence is vague. Prior experience qualifying defense, aerospace and/ or safety critical applications. Experience with requirements management in JAMA or DOORS. A bias toward technical rigor without becoming overly process-heavy. Good judgment about how much structure is needed to keep fast-moving engineering work aligned and accountable. What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview As a Supplier Quality Engineer, you will be the primary guardian of quality for all materials and components entering our facility. You will ensure our supply base is capable, compliant, and synchronized with our production requirements. This role requires a high-energy problem solver who can work across functional groups—from Engineering to Procurement—to resolve technical blockers and drive continuous improvement in a rapid-growth environment. What You’ll Do: Audit & Qualify: Perform supplier audits and assessments to ensure technical, manufacturing, and quality capabilities align with company standards. Manage Non-Conformance: Lead the Root Cause and Corrective Action (RCCA) process for supplier-related defects, ensuring robust solutions are implemented to prevent recurrence APQP & PPAP: Drive Advanced Product Quality Planning and Part Approval Processes to ensure new components are "right first time" before hitting the production line. Visibility & Reporting: Create visibility into supplier performance using Scorecards, Cost of Poor Quality (COPQ) metrics, and Defect Per Million Opportunities (DPMO) reporting. Change Management: Review Engineering Change Orders (ECOs) for impact on supplier tooling and processes, ensuring seamless transitions without supply chain disruption. Collaborate & Expedite: Partner with Procurement to identify high-risk suppliers and provide on-site technical support to unblock production-critical shortages. What You’ll Need: Education: BS in Engineering or a related technical field. Experience: 3+ years of experience in Supplier Quality, Quality Engineering, or Manufacturing Engineering. Technical Proficiency: Strong command of GD&T (Geometric Dimensioning and Tolerancing), statistical process control (SPC), and ERP systems. Problem Solving: Proven ability to lead 8D, 5-Why, or Fishbone investigations to resolve complex manufacturing issues. Industry Context: Experience in aerospace, automotive, or high-complexity hardware industries. Experience with AS9100/ISO9001 standards, Six Sigma Green/Black Belt certification, or familiarity with US export controls (ITAR/EAR). What We Offer: Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing an autonomous gun turret using advanced computer vision and control systems to precisely detect, track, and neutralize enemy drones. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. About The Role: We are looking for a Systems Test Engineer to join our team and own system-level test execution for our next-generation autonomous weapon platforms. In this role, you will design test plans, run integrated hardware/software evaluations, analyze results, and help uncover issues before they become field problems. You will work closely with design, controls, software, and operations teams to validate performance, improve test coverage, and build confidence that the system is ready for deployment. The ideal candidate is hands-on, technically rigorous, and excited to operate at the intersection of testing, integration, and fast-paced product development. What You'll Do: Own test readiness, test execution, instrumentation, post-processing, and evidence packages for system verification work. Define data products, output formats, quick-look checks, and post-test analysis workflows before a test starts. Ensure no test leaves the facility without usable data, a clear owner for analysis, and an initial quality check on results. Build and improve test procedures, instrumentation plans, checklists, and post-test review workflows. Support bring-up, debugging, and fault isolation across system interfaces during verification efforts. Work with systems, mechanical, electrical, and software teams to improve test quality, repeatability, and observability. Drive disciplined handling of raw data, intermediate results, and test evidence so verification outcomes are defensible. Help translate test results into clear evidence packages that support requirement closure and engineering decisions. What You'll Need: Bachelor's or Master's degree in Engineering or a related technical field. 3+ years of experience in hands-on system testing, integration, instrumentation, data capture, or post-processing. Experience with hands-on system testing, instrumentation, data capture, and post-processing. Good judgment around experimental discipline, data usability, and test ownership. Ability to turn raw outputs into clear technical evidence that supports pass/fail decisions. Assemble and operate test equipment and test units in laboratory and field environments. Design test fixtures, support equipment, monitoring equipment, and design modifications to test hardware. Comfort working across mechanical, electrical, software, and systems teams in a fast-paced environment. You'll Stand Out: Strong instincts for catching missing instrumentation, weak analysis plans, or ambiguous ownership before a test starts. A track record of improving test discipline, repeatability, or data quality in complex hardware-software systems. Comfort working through messy raw data formats and incomplete conditions without losing rigor. Experience with Military/ Aerospace Testing Standards such as MIL-STD-810, MIL-STD-461, RTCA DO-160. Experience with requirements management in JAMA or DOORS. A bias toward action combined with strong experimental discipline and technical follow-through. What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview: As the Manufacturing Engineering Manager, your primary mission is to own the physical realization of our autonomous defense systems. You will bridge the gap between engineering R&D and the factory floor, ensuring our mission-critical products are built with precision, efficiency, and scale. This role requires a hands-on leader who thrives in an "engineering-first" culture and possesses the technical grit to build out production lines for complex, ruggedized robotics. What You'll Do: Lead & Scale the Team: Manage, mentor, and grow a high-performing team of manufacturing and industrial engineers. Foster a culture of technical excellence and accountability. Build & Optimize the Line: Lead the design and setup of assembly stations, production layouts, and material flow. Determine the specialized tools, jigs, and fixtures required for repeatable manufacturing. Drive Process Excellence: Champion Lean manufacturing principles and DFM initiatives. Analyze production data to identify bottlenecks and implement physical solutions to increase throughput. Bridge the Gap: Serve as the primary link between Design Engineering and Production. Translate complex blueprints into clear, step-by-step manufacturing instructions and SOPs. Equipment Ownership: Oversee the selection and implementation of manufacturing hardware, from precision hand tools to advanced automated assembly systems. Project Execution: Own the manufacturing roadmap from prototype to full-scale deployment, managing budgets and ensuring production milestones are met on schedule. What You'll Need: Education: Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, or a related technical field. Relevant Experience: 7+ years of professional engineering experience, with at least 3+ years in a leadership or management role. Industry Background: Experience in defense, robotics, aerospace, or a similarly complex electromechanical manufacturing environment. Technical Proficiency: Comfortable reviewing CAD models (SolidWorks, CREO, etc.) and deep knowledge of plant layout and value stream mapping. Adaptability: Experience building or scaling manufacturing teams in a fast-paced startup environment where technical challenges are frequent. What We Offer: Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1 #ZR

Job Description Junior Computer Vision & Machine Learning for Autonomous Anti-Drone Systems Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous venture acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. What You'll Do: Development and optimization of computer vision algorithms for our autonomous gun turret, focusing on real-time drone detection, tracking, and classification. Design and implement machine learning models that can operate in resource-constrained environments while maintaining high accuracy and reliability. Collaborate closely with electrical engineers to integrate computer vision systems into the turret's hardware architecture. Conduct extensive testing and validation of computer vision algorithms in various scenarios to ensure robustness and performance under different environmental conditions. Contribute to the hardening of the prototype turret into a military-grade system, and assist in developing variants for different weapon systems and engagement ranges. What You'll Need: Deep passion for machine learning, computer vision, and robotics, and have been exploring these areas since early in your career. At least a Bachelor's degree in Computer Science, Electrical Engineering, or a related field, with a strong focus on machine learning and computer vision. 0-3+ years of experience working on machine-learning-based computer vision, ideally in the context of robotics. A proven track record of developing and deploying computer vision systems, ideally in real-time or safety-critical applications. Proficient in Python, C++, and have experience with machine learning frameworks such as TensorFlow, PyTorch, or similar. Experience with embedded systems and integrating computer vision algorithms into hardware. Familiar with various sensors (e.g., cameras, LIDAR, RADAR) and their integration into autonomous systems. You enjoy collaborating with other engineers to solve complex technical challenges. What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

The role takes care of the overall design and delivery of key software engineering projects; executing all aspects of the long-term product vision, which includes incubation of new concepts, software solution delivery, validation, sustaining activities, as well as business, financial, and team manag

Job Description Staff Mechanical Design Engineer – Drone Defense Turret Systems Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous venture acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview: We are looking for a highly experienced Mechanical Designer with strong expertise in mechanical simulations and electromechanical integration. The ideal candidate will be well-versed in designing for durability, reliability, and robustness according to MIL-STD-810 standards. You will play a critical role in ensuring our products meet stringent environmental, vibration, and shock requirements, while also integrating complex electromechanical components into our systems. What You'll Do: Design and develop mechanical systems that meet MIL-STD-810 specifications, ensuring robustness under vibration, shock, thermal, and environmental conditions. Perform mechanical simulations (FEA, modal, vibration, thermal) to assess the durability and reliability of designs under operational stress. Collaborate with electrical and systems engineers to integrate electromechanical components, ensuring seamless interaction between mechanical structures and electrical systems. Lead structural integrity testing and analysis, ensuring designs meet environmental test criteria for military-grade systems. Develop and document mechanical design specifications, including detailed drawings, simulation reports, and testing protocols. Conduct testing and validation to ensure that mechanical designs meet the required performance and safety standards. Support prototype development and work closely with manufacturing teams to ensure designs are feasible and cost-effective. Maintain a strong focus on product quality, safety, and reliability, adhering to Design for Manufacturing and Design for Reliability best practices. Contribute to cross-functional design reviews, identifying potential mechanical and electromechanical risks early in the development cycle. What You'll Need: A passion for designing robust mechanical systems that can operate in harsh environments. Previous robotics, robotics lab, medical robotics, or autonomy experience is required. 9+ years of experience in mechanical design, including expertise in electromechanical integration. Bachelor's or Master's degree in Mechanical Engineering or a related field. R&D experience Hands-on experience performing structural, vibration, and thermal simulations using tools such as ANSYS, SolidWorks (preferred). Proficient in 3D CAD software such as SolidWorks (preferred), CATIA, or Creo. Strong understanding of MIL-STD-810 requirements for mechanical durability, including vibration, shock, temperature, and humidity testing. Skilled in electromechanical integration, ensuring compatibility between mechanical structures and electrical components (e.g., wiring harnesses, sensors, actuators). Experience conducting Finite Element Analysis (FEA), Modal Analysis, and Thermal Analysis. Collaborate effectively with electrical, software, and systems engineers to develop integrated solutions. Familiar with Design for Manufacturing (DFM) and Design for Reliability (DFR) principles. You'll Stand Out: Direct experience working with MIL-STD-810 (e.g., vibration, temperature, and shock tests). Knowledge of MIL-S-901D for naval shock testing and MIL-STD-461 for EMI/EMC standards. Familiarity with Electromagnetic Compatibility (EMC) considerations in mechanical design. Experience in rapid prototyping and Additive Manufacturing (3D Printing). Familiarity with fluid dynamics and heat transfer principles. Experience with shock absorption and damping systems for mechanical structures. What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous venture acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview: We are seeking a Software Platform/Infrastructure Engineer to own the software that builds, provisions, updates, and manages our fleet of autonomous systems in the field. You will be responsible for the delivery of "robot factory software" — the imaging, deployment, and fleet-management layer that everything else ships on. What You'll Do: Build and maintain Jetson imaging and provisioning pipelines for repeatable, reliable device bringup. Develop the fleet agent and over-the-air (OTA) update system for safely updating software across deployed units. Own system services, startup/bringup sequencing, and host-level configuration (systemd, networking, security hardening). Work with Embedded Systems to define manufacturing ATP test and diagnostic hooks for the production line. What You'll Need: Bachelor's or Master's degree in Computer Science, Software Engineering, or a related field. Strong proficiency in Python and shell; comfort reading/modifying C++ as needed (replaces the "strong C++ proficiency" line). Deep Linux fundamentals: services, networking, filesystems, boot process, package management. Hands-on experience with embedded Linux and/or single-board compute (NVIDIA Jetson, Raspberry Pi, etc.). You'll Stand Out: NVIDIA JetPack / L4T, Yocto, or embedded Linux build systems. A/B OTA / robust update frameworks (Mender, RAUC, balena, or homegrown). Infrastructure-as-code and fleet-management tooling. Manufacturing test, ATP, or hardware bring-up / factory automation experience. Observability stacks (Foxglove, Prometheus, Grafana, OpenTelemetry). What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. About The Role: We are looking for a Mechanical Drafter to support our engineering team in developing detailed mechanical drawings, 3D models, and documentation for our autonomous defense systems. This role will focus on creating and maintaining accurate design documentation, ensuring drawings meet manufacturing requirements, and supporting engineers throughout the product development process. You'll play an important role in translating engineering concepts into clear, manufacturable designs. What You'll Do: Create and revise detailed mechanical drawings, 3D models, and assemblies in SolidWorks for manufacturing. Develop and maintain accurate drawing packages, BOMs, and part libraries. Support mechanical engineers by converting design concepts into clear and precise technical drawings. Collaborate with mechanical, electrical, and embedded teams to ensure mechanical designs integrate properly with system components. Assist with design revisions, prototyping efforts, and documentation updates during product development cycles. Apply drafting standards, GD&T, and tolerancing practices to ensure manufacturable and production-ready designs. Maintain organized documentation and ensure drawings follow internal engineering standards and revision control processes. Work with fabrication and assembly teams to resolve design issues and support production. What You'll Need: Associate’s or Bachelor’s degree in Drafting, Mechanical Engineering Technology, Electrical Engineering Technology, or a related field. 2+ years of experience drafting in a mechanical/electrical engineering environment. Proficiency with SolidWorks for mechanical modeling and drafting. Familiarity with GD&T, mechanical tolerancing, and drafting standards (ASME Y14.5). Understanding of mechanical assemblies, fasteners, and electro-mechanical systems. Ability to interpret engineering concepts and translate them into accurate technical drawings. Excellent attention to detail and organizational skills. Comfortable working in a fast-paced, highly collaborative environment. You'll Stand Out: Experience supporting hardware development in defense, aerospace, robotics, or industrial equipment. Hands-on experience supporting rapid prototyping or prototype builds. Exposure to configuration management systems and PLM tools. Experience with 3D printing or rapid prototyping technologies. Prior work in a startup or high-velocity engineering team. What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing an autonomous gun turret using advanced computer vision and control systems to precisely detect, track, and neutralize enemy drones. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders’ successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop have a real-world impact. Position Overview We are seeking an experienced CV/ML Platform Engineer with specialization in Computer Vision and Machine Learning (CV/ML) to design, build, and own the data, model, and compute infrastructure powering ACS CV/ML team. You will help manage a 130+ GPU bare-metal Kubernetes cluster, own CV/ML CI/CD pipelines, and ensure ML model training proceeds at high volume with low friction. What You'll Do: Deploy and operate Kubernetes clusters on bare-metal infrastructure hosting 130+ NVIDIA GPUs, with hybrid burst capability to AWS for scalable compute and storage workloads. Manage NVIDIA GPU clusters for ML training. Own the ACS CV/ML CI/CD pipeline. Improve and maintain core ML infrastructure, such as model registration and versioning, experiment tracking, and model and data provenance tracking. Improve and maintain ML model testing, performance analysis, and reporting tools. Automate repetitive model training and testing tasks to increase developer velocity. Work with Software Team Platform Engineers to ensure efficient coordination and minimal duplication between CV/ML infrastructure and wider Software infrastructure. Collaborate with the Software Team to automate the optimization of models (TensorRT/quantization) for deployment on NVIDIA Jetson and other edge hardware. Required Technical Skills: 2+ years of experience in Platform Engineering or DevOps/MLOps. Strong programming skills are required for automating ML lifecycles and building custom CLI tools for CV engineers. Hands-on experience with NVIDIA GPU infrastructure, including managing CUDA libraries and development environments, GPU Operator, device plugins, and scheduling (MIG, Volcano, or fractional GPU sharing). Experience implementing and maintaining MLOps platforms such as Kubeflow, MLflow, Weights & Biases (W&B), or DVC for experiment tracking and model versioning. Familiarity with high-performance storage solutions (e.g., MinIO, WEKA, or Ceph) and data orchestration tools capable of handling terabytes of video/image data. Proven track record building CI/CD pipelines that include automated model validation, performance benchmarking, and artifact management for both cloud and edge targets. Experience with model optimization toolchains, including TensorRT, ONNX, and quantization techniques, specifically for cross-compilation to ARM targets like NVIDIA Jetson. Proficiency with observability stacks (ELK, Prometheus/Grafana) adapted for ML, including monitoring GPU health, training throughput, and model inference metrics. Strong Linux systems knowledge (Debian/Ubuntu), including networking for high-throughput data, storage, and security hardening for defense-grade production environments. What We Offer Competitive salary Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job DescriptionCompany Overview: Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing an autonomous gun turret using advanced computer vision and control systems to precisely detect, track, and neutralize enemy drones. Position Overview We are seeking a dependable and detail-oriented Shipping & Receiving Associate to support daily operations in a fast-paced manufacturing environment. This role is responsible for receiving incoming materials, preparing outbound shipments, organizing warehouse inventory, and ensuring production teams have the parts and materials they need to operate efficiently. The ideal candidate is proactive, organized, and thrives in a hands-on environment where accuracy, teamwork, and adaptability are essential to success. This is a great opportunity to get hands-on experience in a fast-paced environment and play a vital part in delivering state-of-the-art technology to the DoD Additional Details Openings available for First Shift, Second Shift and Weekend Shifts What You’ll Do ● Shipping & Receiving Operations: Receive incoming shipments, inspect packages for accuracy and damage, and ensure materials are properly labeled, documented, and stored. Prepare outgoing shipments and coordinate carrier pickups to support on-time deliveries. ● Production Support: Prepare and stage “kits” for the production team by gathering all required parts and hardware listed on manufacturing orders, ensuring assembly teams have everything needed to begin work immediately. ● Warehouse Coordination: Organize and maintain warehouse areas to ensure efficient material flow, accurate storage locations, and clean, safe workspaces. ● Order Fulfillment & Packing: Pick, pack, and prepare parts, assemblies, and materials for internal production use or external shipment while maintaining high standards of accuracy and quality. ● Logistics Collaboration: Work closely with procurement, production, and logistics teams to coordinate incoming deliveries, outbound shipments, and material movement throughout the facility. ● Documentation & Tracking: Maintain accurate shipping and receiving records, including packing slips, shipment tracking information, delivery confirmations, and material transactions within company systems. ● Process Improvement: Identify opportunities to improve shipping, receiving, material handling, and warehouse organization processes to increase efficiency and reduce delays. ● Compliance & Safety: Follow all company safety procedures, handling requirements, and security protocols for sensitive materials and equipment. Ensure shipping and receiving activities remain compliant with internal standards and applicable regulations. ● Communication & Coordination: Communicate shipment issues, material shortages, receiving discrepancies, or delivery concerns to the appropriate teams in a timely manner. What You Bring To Us ● Prior experience in a stockroom, retail inventory, or warehouse setting is a plus, but not required. A background in a fast-paced environment where you had to track parts or supplies is ideal ● Strong analytical and problem-solving skills ● Excellent communication and interpersonal skills ● Detail-oriented with a commitment to accuracy ● Ability to work in a fast-paced, dynamic environment ● Knowledge of defense industry regulations and compliance standards is a plus What You’ll Need To Be Successful ● Skill in both verbal and written communication ● Prioritize and manage multiple tasks, changing priorities as necessary ● Work under pressure and adapt to changing requirements with a positive attitude ● Self‐motivated, proactive and an effective team player ● Interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, and others ● Ability to safely lift, move, and transport materials as needed throughout the facility We Are Looking For Someone Who ● You are proactive and resourceful, you don’t wait for permission to solve problems. ● You are detail-oriented, but can zoom out and think strategically about systems and scalability. ● You have a hospitality mindset, you anticipate others’ needs and take pride in creating a welcoming and effective workspace. ● You thrive in a fast-paced, ambiguous environment, and you’re energized by building things from scratch. ● You’re excited to support a team of engineers and remove obstacles so they can focus on building. What We Offer ● Competitive salary ● ACS Equity Package ● Health, Dental, Vision Insurance ● Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview Allen Control Systems is seeking an eager, hands-on CNC Support Technician to join our team in a developmental role. This position is perfect for someone with a strong mechanical foundation who is ready to take ownership of shop cleanliness, machine preparation, and basic maintenance. You will work directly under our experienced team, learning the ropes of a high-speed production environment while ensuring our machine shop remains organized and efficient. We are looking for a practical 'fixer' who enjoys hands-on work and is eager to develop their technical skills in CNC operations through direct experience and mentorship. What You’ll Do: Shop Upkeep: Take pride in maintaining a world-class machine shop by ensuring floors, benches, and machines stay clean and organized to support manufacturing. Machine Preparation: Assist in daily machine warm-ups, coolant level checks, and chip removal to keep our CNC equipment running smoothly. Tooling & Assembly: Support the team by assembling workbenches, industrial racking, and basic shop furniture as we scale our facility. Basic Repairs: Under supervision, perform light mechanical repairs and learn to troubleshoot shop equipment. Hardware Management: Maintain and organize the inventory of tools, drill bits, and hardware so the shop never slows down. Material Handling: Assist in receiving materials and moving components between the machine shop and production floor. Documentation: Keep simple, accurate logs of maintenance tasks and safety checks to ensure a safe workspace. What You'll Need: Eagerness to Learn: A self-motivated mindset and a genuine interest in CNC machining and defense technology. Mechanical Aptitude: Comfortable using basic hand tools and power tools; you likely enjoy taking things apart to see how they work. Reliability: A strong work ethic and the "extreme ownership" needed to manage the physical needs of the shop independently. Communication: Clear verbal communication and the ability to follow technical instructions accurately. Physical Readiness: Ability to perform hands-on work in a machine shop and manufacturing environment. Education/Experience: A high school diploma or equivalent; any exposure to trade schools, shop classes, or hobbyist mechanics is a major plus. What We Offer: Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Mentorship: Direct access to experienced machinists and a front-row seat to the development of cutting-edge robotics. Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders’ successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop have a real-world impact. As an Electrical Quality Inspector at Allen Control Systems (ACS), you are the final line of defense for the Bullfrog™ autonomous gun turret system. You will be responsible for ensuring that every wire harness and Printed Circuit Board Assembly (PCBA) meets the rigorous standards required for tactical edge defense hardware. This is not a "check-the-box" role; you are expected to provide real-time feedback to production and engineering to eliminate bottlenecks and prevent quality escapes. What You’ll Do Technical Inspection: Perform detailed visual and mechanical inspections of complex wire harnesses and PCBAs to IPC-A-610 and IPC/WHMA-A-620 Class 3 standards. System Ownership: Document inspection results, manage non-conforming material, and verify that all assemblies match the latest engineering revisions and BOMs. Root Cause Analysis: Collaborate directly with Engineering and Production to identify the source of workmanship defects and implement immediate corrective actions. In-Process Audits: Conduct "floor-side" audits of assembly techniques, including crimping, soldering, and component placement, to ensure quality is built-in from the start. What You’ll Need Experience: 3+ years in quality inspection within a high-stakes electronics manufacturing environment (aerospace, defense, or robotics preferred). Certifications: Current or prior certification in IPC-A-610 and/or IPC/WHMA-A-620 is required. Technical Literacy: Expert ability to read and interpret complex electrical schematics, wire run lists, and mechanical drawings. Systems Expertise: Experience using ERP systems (Odoo highly preferred) for quality documentation and inventory management. Operational Grit: A "no-excuses" approach to quality. You must be comfortable making difficult "reject" calls to prioritize the mission and product reliability. You’ll Stand Out Startup Scaling: Experience establishing quality gatekeepers in a rapidly growing production environment. Specialized Testing: High-reliability harnesses and circuit boards automated testing techniques Lean Mindset: Practical experience applying quality improvements without unnecessary corporate bureaucracy. What We Offer: Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1 #ZR

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview: Allen Control Systems is seeking a highly skilled Quality Inspector to support the inspection, testing, and quality analysis. The ideal candidate has a strong eye for detail, technical aptitude, and a commitment to upholding excellence in a fast-paced production environment. What You'll Do: Perform visual, dimensional, and functional inspections of machined parts and assemblies using tools such as calipers, micrometers, height gauges, and coordinate measuring machines (CMMs). Verify conformance to engineering drawings, blueprints, and tolerances, including geometric dimensioning and tolerancing (GD&T) requirements. Document inspection results, identify non-conformances, and initiate quarantine procedures for defective items while notifying relevant teams. Conduct first article inspections (FAI) and support supplier quality audits to ensure incoming materials meet specifications. Maintain inspection equipment through routine calibration and troubleshooting to guarantee measurement accuracy. Collaborate with production, engineering, and quality teams to resolve issues, track trends, and contribute to continuous improvement efforts. Generate reports on quality metrics, such as defect rates and yield, using basic data analysis tools. What You'll Need: Education: Associate's or Bachelor's degree in Engineering field. Experience: Minimum of 4 years of experience in quality inspection within a manufacturing or assembly setting. Proficiency with precision measurement tools and reading technical drawings/blueprints. Basic understanding of quality standards like ISO 9001 and statistical process control (SPC). Strong attention to detail, manual dexterity, and ability to work independently or in a team. Certification as a Certified Quality Inspector (CQI) from ASQ or similar. Experience with CMM programming (e.g., PC-DMIS) or automated inspection systems. Familiarity with non-conformance reporting (NCR), material review boards (MRB), and corrective action processes (CAR). What we Offer: Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers and manufacturing professionals. Position Overview Allen Control Systems is seeking a hands-on Shop Technician to support daily shop operations, including retaping threaded holes, performing light fabrication work, building shipping crates, and assisting with general shop tasks. This role requires attention to detail, mechanical aptitude, and the ability to work safely and efficiently in a hands-on manufacturing environment. This position will be a contract opportunity. What You'll Do Retape threaded holes to required specifications and tolerances Inspect and clean parts prior to rework or assembly Build custom shipping crates and packaging for outgoing products Operate basic shop tools and equipment (hand tools, power tools, drill press, etc.) Measure and verify part dimensions using basic measuring tools (calipers, tape measure, etc.) Assist with light fabrication and general shop support tasks Maintain a clean, organized, and safe work environment Follow work instructions, shop procedures, and safety guidelines Support shipping and receiving activities as needed What You'll Need Prior experience in a machine shop, manufacturing, or fabrication environment preferred Basic understanding of mechanical components and threaded fasteners Ability to read basic work instructions and use measuring tools Strong attention to detail and quality Ability to lift up to 50 lbs and stand for extended periods Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview As a Production Planner, you will manage the flow of all materials and components through the business. You will ensure the production team has work in their queue, the correct priorities, and a clear path to build without blockers. This role requires a strong team player who can work across functional groups to achieve company-wide goals in a rapid-growth environment. What You’ll Do: Create production plans that translate sales/forecasts to a production plan that the procurement team can execute against. Release work orders to Production and kit requests to Inventory. Create visibility of material positions using line-of-balance, shortage, and clear-to-build reports. Support prioritization and expedite subassemblies to support integration timelines. Update demand to accommodate engineering change orders and communicate changes to procurement What You’ll Need: Bachelor’s degree in engineering, business, supply chain, or a relevant field. 2+ years of experience in production planning or manufacturing support Proficiency in MRP and ERP systems, as well as MS Office (Excel), basic math, and statistics. Proven ability to conduct clear-to-build reviews and expedite materials through production. Experience in aerospace, automotive, or other disruptive manufacturing industries. Experience with AS9100 or US export controls is a plus. What We Offer: Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job Description Software Engineer Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing an autonomous gun turret using advanced computer vision and control systems to precisely detect, track, and neutralize enemy drones. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders’ successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop have a real-world impact. Position Overview: We are seeking a highly skilled robotics software engineer, very proficient in C++ or Python coding. What You'll Do: Design, develop, and maintain high-performance software applications using C++. Optimize and enhance existing software for efficiency, scalability, and reliability. Collaborate with cross-functional teams, including mechanical, electrical, computer vision, and software engineers. Implement best practices in software engineering, including code reviews, unit testing, and documentation. Debug, troubleshoot, and resolve software defects and performance issues. Work with modern development tools, version control systems (Git), and CI/CD pipelines. Develop algorithms and data structures to solve complex computational problems. Ensure security and compliance standards are met in software development. What You'll Need: Bachelor's or Master's degree in Computer Science, Software Engineering, or a related field. Strong proficiency in C++ (C++11/14/17/20) and Python. Experience with multi-threading, concurrency, and performance optimization. Familiarity with software development methodologies and design patterns. Knowledge of system programming, memory management, and debugging tools. Experience with version control systems (Git) and agile development practices. Strong problem-solving skills and ability to work in a fast-paced environment. Professional experience in software development preferred. You'll Stand Out: Experience with GPU programming (CUDA, OpenCL) or parallel computing. Knowledge of networking protocols and distributed systems. Exposure to machine learning frameworks (TensorFlow, PyTorch) or scientific computing. Experience with DevOps tools (Docker, Kubernetes, CI/CD pipelines) What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview: As the Senior Industrial Engineer, your primary mission is to design, stand up, and scale new manufacturing facilities to support rapid production of autonomous defense systems. This is a rare opportunity to build factories from the ground up within a rapidly expanding company—defining how we launch new sites, replicate success, and scale operations across multiple locations. You will focus on creating repeatable, high-performance manufacturing systems—owning factory layout, material flow, and production design from initial concept through operational ramp. This role requires a hands-on builder who can translate production goals into fully functioning factories and deploy those systems across sites with speed and consistency. What You'll Do: New Factory Stand-Up: Lead the planning and execution of new manufacturing site launches, from greenfield layout through production ramp. Multi-Site Deployment: Develop standardized layouts, material flow models, and production systems that can be replicated and scaled across multiple facilities. Factory Layout & Flow: Design efficient facility layouts and end-to-end material flow (receiving → storage → kitting → line-side → shipping) to support high-throughput operations. Production System Design: Define and implement production lines, workstations, and labor models aligned to takt time and output targets. Capacity & Ramp Planning: Build capacity models and ramp plans for new and existing sites, identifying constraints and scaling strategies. Tooling & Infrastructure: Partner with Manufacturing Engineering to deploy tooling, fixtures, and factory infrastructure required to bring new sites online. Standard Work & Documentation: Establish standardized processes, work instructions, and operating models to ensure consistency across locations. Cross-Functional Coordination: Work closely with Supply Chain, Facilities, Quality, and Production to ensure each site is fully operational at launch. Continuous Improvement at Scale: Drive improvements across sites by leveraging data, feedback loops, and shared best practices. What You'll Need: Education: BS in Industrial Engineering, Manufacturing Engineering, or a related field Relevant Experience: 7+ years in manufacturing or industrial engineering, with direct experience standing up new production lines, factories, or major facility expansions. Factory Build Experience: Proven track record of taking a facility or production area from concept to operational readiness. Multi-Site Mindset: Experience supporting or scaling manufacturing across multiple locations with a focus on standardization and repeatability. Technical Competence: Expertise in factory layout and flow planning tools (AutoCAD, SolidWorks, or similar) Strong foundation in lean manufacturing (value stream mapping, line balancing, waste reduction) Experience with capacity modeling and production ramp planning • Execution Focus: Ability to operate at both the planning level and hands-on on the factory floor during site bring-up., • Builder Mentality: Comfortable working in ambiguous environments and creating structure where none exists., • Adaptability: Thrives in a fast-paced, high-growth environment with evolving production demands. What we Offer: Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1 #ZR

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous venture acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview: We are looking for a highly experienced Mechanical Designer with strong expertise in dynamic mechanical systems and electromechanical integration. The ideal candidate will be well-versed in designing for durability, reliability, and robustness according to MIL-STD-810 standards. You will play a critical role in ensuring our products meet stringent environmental, vibration, and shock requirements, while also integrating complex electromechanical components into our systems. What You'll Do: Design and develop mechanical systems that meet MIL-STD-810 specifications, ensuring robustness under vibration, shock, thermal, and environmental conditions. Perform kinematic and multibody dynamic analysis to predict motion profiles, joint loads, torque requirements, and system stability in robotic and electromechanical assemblies. Perform kinematic and multibody dynamic analysis to predict motion profiles, joint loads, torque requirements, and system stability in robotic and electromechanical assemblies. Perform mechanical simulations (structural, dynamic, modal, vibration, thermal) to assess the durability and reliability of designs under operational stress. Collaborate with electrical and systems engineers to integrate electromechanical components, ensuring seamless interaction between mechanical structures and electrical systems. Develop and document mechanical design specifications, including detailed drawings, simulation reports, and testing protocols. Conduct testing and validation to ensure that mechanical designs meet the required performance and safety standards. Support prototype development and work closely with manufacturing teams to ensure designs are feasible and cost-effective. Maintain a strong focus on product quality, safety, and reliability, adhering to Design for Manufacturing and Design for Reliability best practices. Contribute to cross-functional design reviews, identifying potential mechanical and electromechanical risks early in the development cycle. What You'll Need: A passion for designing robust mechanical systems that can operate in harsh environments. Advanced experience in robot dynamics, such as flexible multibody dynamics, dynamic simulations of compliant mechanisms, or vibration control in robotic arms and gantries 5+ years of experience in mechanical design, including expertise in electromechanical integration. Bachelor's or Master's degree in Mechanical Engineering or a related field. R&D experience working with robotics or in a robotic lab. Advanced experience in robot dynamics, such as flexible multibody dynamics, dynamic simulations of compliant mechanisms, or vibration control in robotic arms and gantries. Proficient in 3D CAD software such as SolidWorks (preferred), CATIA, or Creo. Strong understanding of MIL-STD-810 requirements for mechanical durability, including vibration, shock, temperature, and humidity testing. Skilled in electromechanical integration, ensuring compatibility between mechanical structures and electrical components (e.g., wiring harnesses, sensors, actuators). Collaborate effectively with electrical, software, and systems engineers to develop integrated solutions. Familiar with Design for Manufacturing (DFM) and Design for Reliability (DFR) principles. You'll Stand Out: Advanced experience in robot dynamics, such as flexible multibody dynamics, dynamic simulations of compliant mechanisms, or vibration control in robotic arms and gantries. Direct experience working with MIL-STD-810 (e.g., vibration, temperature, and shock tests). Knowledge of MIL-S-901D for naval shock testing and MIL-STD-461 for EMI/EMC standards Familiarity with Electromagnetic Compatibility (EMC) considerations in mechanical design. What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job DescriptionCompany Overview: Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing an autonomous gun turret using advanced computer vision and control systems to precisely detect, track, and neutralize enemy drones. Position Overview We are seeking a Manufacturing Engineer with an Electrical Focus to serve as the bridge between our complex electrical designs and a high-quality production floor. You will own the processes, standards, tooling, and troubleshooting that ensure every ACS system is wired correctly, tested thoroughly, and built to perform in the field. We welcome candidates at all experience levels. What You’ll Do Own the end-to-end cable and harness assembly process, defining how we cut, strip, crimp, and label wiring to ensure every system leaves the floor correctly built and documented. Serve as the floor expert for electrical quality, ensuring the team meets IPC-A-620 standards for cable and harness assembly and IPC-A-610 standards for PCBA handling and installation. Lead troubleshooting on intermittent electrical faults and wiring anomalies, digging into harnesses and connectors to identify and resolve root causes. Design and set up go/no-go test stations to verify that every harness and electrical sub-assembly is functional before reaching the main production line. Manage electrical assembly equipment, including crimp presses, wire processors, and continuity testers, ensuring tools are calibrated and technicians are set up to succeed. Improve electronics integration by ensuring PCBAs are mounted securely, connectors are accessible, and wiring is routed and protected against wear and environmental stress. What You’ll Need Bachelor’s degree in Electrical Engineering, Electrical Engineering Technology, or a related technical field. We welcome all experience levels. Entry-level candidates (0–4 years) should have hands-on experience with electronics, robotics, or hardware through internships, coursework, or personal projects. Mid-to-senior candidates (5+ years) should bring experience setting up harness production lines, creating formal test procedures, or managing high-reliability electrical assemblies. Solid understanding of wire gauges, connector types, and crimping techniques; familiarity with IPC-A-620 is a strong plus. Familiarity with PCBA handling and quality verification based on IPC-A-610 standards. Hands-on troubleshooting skills using multimeters and continuity testers to diagnose shorts, opens, and high-resistance connections. Strong communication skills; comfortable working closely with technicians to improve assembly methods and providing clear feedback to the design team when changes are needed. What We Offer Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1 #ZR

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous venture acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview We are seeking a Software Engineer with a speciality in Robotics. In this position you will be responsible for turning computer vision output into precise, safe motion — running real-time control loops, and getting the turret pointed exactly where we want it, when we want it. What You'll Do: Control robot motion to track drones under tight real-time constraints. Develop and tune real-time control loops for accurate, stable pointing. Own calibration routines and coordinate-frame transforms across the sensor/actuator chain. Define and negotiate a robust software/hardware contract at the actuation handoff, minimizing rework. Enforce safety constraints on motion (limits, no-fire zones, fault handling) as a first-class design concern. What You'll Need: Bachelor's or Master's degree in Computer Science, Software Engineering, or a related field. Strong proficiency in C++ for real-time/deterministic code; Python for tooling and analysis. Solid grounding in linear algebra, kinematics, and coordinate transforms. Experience with real-time or low-latency systems and performance optimization. Control theory fundamentals (PID and beyond). You'll Stand Out: Robotics frameworks (ROS/ROS 2) and Eigen. Advanced control (MPC, LQR, state estimation / Kalman filtering). Motor / servo / actuator control and sensor calibration. Real-time Linux, deterministic scheduling, or safety-critical systems experience. What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

The role takes care of the overall design and delivery of key software engineering projects; executing all aspects of the long-term product vision, which includes incubation of new concepts, software solution delivery, validation, sustaining activities, as well as business, financial, and team manag

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing an autonomous gun turret using advanced computer vision and control systems to precisely detect, track, and neutralize enemy drones. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders’ successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. About The Role We are looking for an Electronics Thermal Engineer to own thermal design and analysis across our power electronics systems. You will engineer thermal solutions for our high-performance motor drive and power conversion hardware — from early-stage thermal simulation and component selection through physical validation in the lab. This role sits at the intersection of power electronics and mechanical thermal management, and requires someone who can work closely with our electrical and mechanical teams to ensure our systems operate reliably under demanding field conditions. What You’ll Do Design and analyze thermal solutions for power electronics systems including embedded computing, motor drive inverters, and DC/DC converters— ensuring components operate within safe temperature limits under worst-case operating conditions. Run steady-state and transient thermal simulations using tools such as ANSYS Icepak, FloTHERM, or equivalent CFD software to evaluate heat dissipation, airflow, and thermal resistance across the system. Perform heat transfer analysis — conduction, convection, and radiation — to characterize thermal paths from junction to ambient and identify design risks before fabrication. Select and specify thermal interface materials (TIMs), heat sinks, cold plates, and thermal management components; work with PCB layout engineers to optimize copper pours, thermal vias, and component placement for heat spreading. Validate thermal designs through lab testing using thermocouples, thermal cameras, and data acquisition systems; correlate simulation results with measured data and iterate on design as needed. Collaborate with electrical engineers during schematic and PCB layout reviews to flag thermal risk areas early and propose design modifications. Support system-level thermal architecture for the autonomous turret platform, including enclosure thermal management under sustained operational load. Maintain thermal analysis documentation including simulation models, test results, derating calculations, and design verification reports. What You’ll Need 3+ years of hands-on experience in electronics thermal design with a focus on power electronics, motor drives, or high-power embedded systems. Strong proficiency in thermal simulation tools — ANSYS Icepak, FloTHERM, or equivalent — for both component-level and system-level heat transfer analysis. Solid understanding of heat transfer fundamentals: conduction through PCB stackups and heatsink interfaces, forced and natural convection, and radiation in enclosed electronics systems. Hands-on experience with thermal validation techniques: thermocouple placement, thermal imaging, and bench-level characterization of power dissipation and temperature rise. Familiarity with power electronics hardware — ability to read schematics, understand loss mechanisms in MOSFETs, inductors and ICs, and translate component power dissipation into thermal load inputs. Experience specifying thermal interface materials, heat sinks, cold plates, and other passive thermal management components. Bachelor’s or Master’s degree in Mechanical Engineering, Electrical Engineering, or closely related field with a focus on thermal or fluid systems Experience correlating thermal simulation models with physical test data and iterating designs to close gaps. You’ll Stand Out Experience with thermal management for defense, aerospace, or autonomous systems where reliability under sustained load is non-negotiable. Familiarity with power electronics design — PCB layout, switching losses, and gate driver behavior — that allows you to contribute beyond thermal analysis into early-stage hardware design reviews. Experience with liquid cooling or active thermal management systems for high-power-density electronics. Background in GaN or SiC power device thermal characterization, including junction temperature estimation and derating under high-frequency switching. Knowledge of military or industrial thermal standards (MIL-STD-810, JESD51, or equivalent). What We Offer Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two Former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. About The Role: We are looking for a Test Integration Engineer to join our team, focusing on system integration, bring-up, debugging, and validation of our next-generation autonomous weapon platforms. This role is highly hands-on and involves working across electrical, mechanical, and software systems to diagnose issues, improve reliability, and ensure systems perform in real-world conditions. What You'll Do: Integrate electrical subsystems including motor drivers, sensors, cameras, networking and power systems. Perform system bring-up, debugging and validation during prototype and production phases. Debug and integrate systems spanning Linux-based platforms and STM32 firmware. Use oscilloscopes, logic analyzers, spectrum analyzers, and other lab equipment to diagnose power, signal integrity, timing and communication issues. Develop and execute test procedures for electrical, communication and system level validation. Support field testing and help root-cause failures observed during operation Collaborate with hardware and software engineers to improve design robustness and testability. Build and maintain test fixtures, harnesses, and automation tools where appropriate Assist in validating new hardware revisions and verifying design changes. What You'll Need: Bachelor’s or Master’s degree in Electrical Engineering or related field. 3+ years of experience in hardware bring-up, integration and test. Strong hands-on experience using oscilloscopes, logic analyzers, and other lab instrumentation. Familiarity with embedded systems and firmware debugging. Strong proficiency working in Linux environments from the command line. Experience with common electrical interfaces (CAN, Ethernet, RS-422/485, UART, I²C) Basic scripting or programming ability (Python or C/C++). Understanding of real-time constraints and hardware-software integration challenges. A desire to work in a highly collaborative, fast-paced startup environment. You'll Stand Out: Hands-on work with high-power, motor-driven, or battery-based systems Exposure to hardware-in-the-loop (HIL) or system-level test environments Working knowledge of embedded Linux platforms such as Yocto or Ubuntu-based systems Understanding of EMI and EMC considerations and field reliability challenges Involvement in field testing or operational deployments Proven ability to troubleshoot intermittent or system-level failures in complex hardware systems What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous venture acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview We are seeking a highly skilled and experienced manufacturing leader to support the scale-up of Allen Control Systems’ production operations under the direction of the VP of Manufacturing. This role will initially be based in Austin, Texas, where you will play a key leadership role in scaling current manufacturing operations to medium-volume production while building the systems, processes, and operational foundation for future expansion. As ACS grows, this role will serve as the manufacturing lead for the planning, build-out, and launch of a new production facility in Cullman, Alabama. Following successful site launch and operational ramp-up, this position is expected to transition to Cullman to provide on-site manufacturing leadership for long-term operations. This is a hands-on scale-up leadership role for someone experienced in manufacturing execution, facility launch, process development, and production transfer in a fast-paced, high-growth environment. What You’ll Do Support Austin Manufacturing Scale-Up: Work with the VP of Manufacturing to scale ACS’s Austin production operations from early production to stable medium-volume output, improving throughput, quality, and operational discipline. Lead Cullman Facility Launch: Serve as the manufacturing lead for the planning, build-out, equipment installation, process validation, and launch of ACS’s future manufacturing facility in Cullman, Alabama. Develop Production Transfer Strategy: Create and execute the roadmap for transferring products, tooling, documentation, and manufacturing processes from Austin to Cullman with minimal production disruption. Build Scalable Manufacturing Systems: Establish production processes, work instructions, training systems, quality controls, and manufacturing operating rhythms that can scale across facilities. Facility & Equipment Readiness: Partner on facility layout, line design, equipment selection, commissioning, and manufacturing readiness activities for the Cullman site. Workforce Ramp & Team Development: Support hiring, onboarding, and development of manufacturing teams in both Austin and Cullman, including eventual site leadership build-out. Cross-Functional Manufacturing Leadership: Work closely with engineering, supply chain, quality, and operations teams to ensure manufacturability, production readiness, and successful scale-up. Production Execution & Continuous Improvement: Drive daily manufacturing performance through Lean principles, bottleneck reduction, cost control, and operational discipline. What You’ll Need Experience scaling manufacturing operations from prototype / low-rate production into medium- or high-volume production environments. Experience launching or significantly expanding manufacturing facilities, including equipment deployment, process validation, and production ramp. Experience leading production transfers or multi-site manufacturing operations. Strong operational leadership with the ability to execute in fast-paced startup or scale-up manufacturing environments. Willingness to initially work in Austin, Texas and transition to Cullman, Alabama as manufacturing operations scale. What We Offer: · Competitive salary · ACS Equity Package · Health, Dental, Vision Insurance · Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.