Aerospace jobs in Westfield, New JerseyCreate job alerts

Job DescriptionSalary: $17 - $20 JOB DESCRIPTION What youll be building: Our lighting components go into avionic displays used in commercial and military aircraft cockpits. The job Assembly Staff Youll be assembling small, tiny, high-precision lighting components by hand the kind of parts that end up in military aircraft, avionics panels, and defense systems. This is an entry-level position with exposure to engineering and manufacturing. It is careful, quiet, repetitive work that requires you to care about getting it right every single time. Well train you. Most people are fully up to speed within a few days. What we cant train is the disposition the kind of person who slows down when it matters, notices when something doesnt look right, and takes satisfaction in a clean and accurate finished part. If thats you, keep reading. What your days look like • Hand-assembling precision lighting components and subassemblies at your workstation, • Following detailed work instructions accuracy matters more than speed, • Inspecting your own work before it moves to the next stage, • Keeping your workspace clean, organized, and audit-ready, • Working closely with a small, experienced team in a quiet production environment Who were looking for Not a resume a type of person. • You have steady hands and genuine patience for detailed work, • You find satisfaction in repetitive tasks done correctly, not frustration, • You show up on time, every time, and take reliability seriously, • You ask questions when something doesnt look right instead of hoping it is fine, • Previous hands-on work assembly, electronics, manufacturing, even hobbies like model-building or crafts is a plus, not a requirement What you get • $17$20 per hour, with increases tied to your performance not a calendar, • Opportunity for overtime, • Full benefits: health insurance after three (3) months of service and paid time off, • Stable full-time schedule weve been in business 52 years and we are not going anywhere • On-the-job training from day one no aerospace background required, • A small team where your work is visible and your contribution actually matters, • The kind of company where people tend to stay, • Opportunity for growth Documentation You must be able to provide a full I-9 packet with legal documents. About Lumitron Weve been making aerospace and defense lighting components for 52 years. Our parts are in military aircraft around the world cockpit panels, night vision systems, crew stations. Were a small team in Berkeley Heights, New Jersey, and we take our work seriously because the people using our components do too. We are not a warehouse. We are not a factory floor. Were a precision manufacturing shop where quality is the whole job. How to apply Send us a current resume, and/or a few sentences about yourself what kind of work youve done, why this sounds like a fit to sales@lumitron.com with the subject line Assembly Staff. We read every one. If youve ever built something with your hands and felt proud of how it came out this is probably your kind of position.

Senior Electrical Engineer (Aerospace/Defense) Are you an Electrical Engineer who wants to own full systems — not just design one piece of the board? Do you enjoy taking products from concept through to build and validation, rather than handing designs off? Want to work on real space hardware supporting next-generation control systems? Join a high-performing aerospace & defense engineering team developing advanced fluid control and actuation systems for space applications. This is a role where you’ll have real ownership — acting as the primary Senior Electrical Engineer on your projects, working across the full development lifecycle. What You’ll Be Doing as a Senior Electrical Engineer: • Owning electrical development from requirements through to validation, • Designing control systems for motor-operated valves and actuation systems, • Leading circuit design, architecture, and system integration, • Supporting both new product development and enhancements to existing systems, • Managing 2–3 concurrent projects, with a strong focus on design and some hands-on lab work, • Working closely with mechanical, systems, and manufacturing teams The Ideal Senior Electrical Engineer Will Bring: • Experience with motor control or electromechanical systems, • Min 3+ years of relevant electrical design experience, including board-level (PCB/CCA) design, • Strong board-level circuit design ownership, • Solid background in analog circuit design, • Ability to work independently while collaborating across teams Location : Springfields , NJ Why Join as a Senior Electrical Engineer? This is the kind of role where you’re trusted to take full ownership of your work. You won’t be boxed into a narrow scope — instead, you’ll be involved from early design decisions through to final validation, seeing your work come to life in real hardware. You’ll be working on meaningful systems in the defense sector, where the engineering challenges are real and the impact of your work is visible.

ANSYS Fluent simulations, Siemens Opcenter MES, Jira / Confluence) - Design multi-step tasks grounded in your real workflows that require navigating multiple apps, files, and stakeholders in a way that meaningfully challenges frontier AI agents - Collaborate with other aerospace and defense experts

Four to eight years of experience in Quality Assurance, Quality Engineering, Manufacturing Engineering, or equivalent experience in aerospace, defense, or another highly regulated manufacturing environment. Work closely with Product Engineering, Manufacturing Engineering, Manufacturing, Test, and In

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Training & development, • Vision insurance Project Manager Location: North Plainfield, New Jersey Company: Avantier Premium Custom Optics Manufacturer Base Salary: $75,000 $95,000 About Avantier Inc. At Avantier, you wont just have a jobyoull work on real, cutting-edge technology used in aerospace, defense, and life sciences. We are a global photonics company (25+ years), specializing in custom optical design, engineering, and manufacturing for high-tech industries worldwide. What Were Looking For: • A self-motivated sales professional with a proven track record in B2B project management, • Strong relationship-building skills and a strategic mindset, • Experience working with technical or manufacturing industries is a plusJoin us and be part of a team that's advancing innovation through optics. What Youll Do • Manage the sales cycle from qualified inbound leads to close, with a focus on generating incremental revenue., • Proactively identify and pursue new business opportunities, nurture relationships, and building a strategic sales pipeline for sustained long-term growth., • Collaborating with prospects to understand their needs, challenges, and objectives, and delivering customized optical solutions that align with their goals., • Consistently meeting or exceeding weekly activity targets, including outreach, follow-ups, and sales engagement metrics. Skills/ Key Qualifications: • 3+ years of successful B2B project management experience, ideally with technical products, • Proven track record in managing warm leads and assist closing long sales cycles, • Skilled in delivering effective presentations and demos, • Comfortable attending industry events (conferences, trade shows) to generate leads, • Excellent communication skills, both written and verbal, • Team-oriented with a positive, proactive attitude, • Background or interest in science/optics is a plus, • Ability to build relationships with C-level decision makers is a strong advantage Education: Bachelor's degree required, additional certificates are a bonus Why Join Avantier? • Industry training provided, • Work with a dynamic, collaborative team, • High-impact role with growth opportunities

Job Description Under minimum supervision working from blueprints, sketches written and/or verbal instructions, sets up and performs the most diversified and complex progressive machining, fitting and assembly operations. Determines proper tooling and sequence of operations, and skillfully uses all machinists’ hand tools and machine shop measuring equipment in order to produce work to specifications. Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tool to be used. ESSENTIAL FUNCTIONS • Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tools to be used., • Must be able to skillfully use all machinist’s hand tools and measuring instruments., • Must be familiar with the machining of most materials., • Must be able to use advanced shop math, including trigonometry., • Moves parts to and from the work area., • Maintains good housekeeping in the work area., • Meets all safety requirements in the machine shop and follows all company policies., • Performs miscellaneous job-related duties as assigned by supervision. KNOWLEDGE, SKILLS AND ABILITIIES REQUIRED • Ability to operate standard and specialized equipment to produce prototype and/or production parts, • Ability to perform standard shop computations, using technical math, geometry and trigonometry., • Candidate must have “Team” like mentality and be willing to work with a group EQUIPIMENT/MACHINERY USED • Proficient use of set up and operation of CNC machining center., • Proficient use of tool and surface grinders, • Proficient use of all shop inspection equipment, including but not limited to, CMM, comparator, digital height gages, micrometers, etc. MINIMUM QUALIFICATIONS • Requires a High school diploma or equivalent education, • Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist., • Demonstrates effective verbal and written communication skills. PHYSICAL REQUIREMENTS • Moderate physical activity., • Requires handling of average-weight objects up to 50 pounds and pushing, pulling or standing and walking for extended periods of time. The job location is at 2 Lawrence Road, Springfield, NJ 07081 Salary Range:$33.63 To $48.57 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Training & development, • Vision insurance B2B Sales Executive (Full-Cycle / Hunter) Location: North Plainfield, NJ (In-Person) $110,000 $150,000 base + Bonus + Commission + Full Benefits (Medical, Dental, Vision) + PTO About Avantier Inc. At Avantier, you wont just have a jobyoull work on real, cutting-edge technology used in aerospace, defense, and life sciences. We are a global photonics company (25+ years), specializing in custom optical design, engineering, and manufacturing for high-tech industries worldwide. Role Overview This is a full-cycle B2B sales role. You will be responsible for generating your own pipeline and closing deals independently, working with technical clients through complex, long sales cycles. We are looking for a results-driven, self-sufficient closer not a support or account management role. What Youll Do • Own the entire sales cycle: prospecting qualification proposal negotiation close, • Generate new business through outbound efforts (cold calls, email, networking, events), • Build and manage a strong pipeline of B2B opportunities, • Sell into technical and enterprise-level clients across industries including aerospace, defense, life sciences, AR/VR, machine vision, robotics, automotive, and advanced industrial applications., • Represent Avantier at trade shows, conferences, and industry events, • Collaborate with internal engineering and leadership teams to deliver solutions Must-Have Qualifications • 3-5 years of B2B sales experience (required), • Proven ability to generate pipeline and close deals independently, • Experience managing long and complex sales cycles, • Strong outbound prospecting skills (cold calling, lead generation), • Excellent communication skills, • Stable work history, • High attention to detail (professional, error-free communication) Nice to Have • Experience selling into technical / industrial / software / engineering sectors, • Demonstrated quota achievement or revenue performance, • Experience with CRM tools (Salesforce, HubSpot, etc.) Education • Bachelors degree required Compensation & Benefits • Base Salary: $110,000 $150,000, • Performance-based Bonus & Commission, • Full Benefits (Medical, Dental, Vision), • Paid Time Off Why Join Avantier • Work on real, high-impact technology, • Direct exposure to engineering and innovation-driven industries, • High-performance, growth-oriented environment

Job Description Under minimum supervision working from blueprints, sketches written and/or verbal instructions, sets up and performs the most diversified and complex progressive machining, fitting and assembly operations. Determines proper tooling and sequence of operations, and skillfully uses all machinists’ hand tools and machine shop measuring equipment in order to produce work to specifications. Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tool to be used. ESSENTIAL FUNCTIONS • Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tools to be used., • Must be able to skillfully use all machinist’s hand tools and measuring instruments., • Must be familiar with the machining of most materials., • Must be able to use advanced shop math, including trigonometry., • Moves parts to and from the work area., • Maintains good housekeeping in the work area., • Meets all safety requirements in the machine shop and follows all company policies., • Performs miscellaneous job-related duties as assigned by supervision. KNOWLEDGE, SKILLS AND ABILITIIES REQUIRED • Ability to operate standard and specialized equipment to produce prototype and/or production parts, • Ability to perform standard shop computations, using technical math, geometry and trigonometry., • Candidate must have “Team” like mentality and be willing to work with a group EQUIPIMENT/MACHINERY USED • Proficient use of set up and operation of CNC machining center., • Proficient use of tool and surface grinders, • Proficient use of all shop inspection equipment, including but not limited to, CMM, comparator, digital height gages, micrometers, etc. MINIMUM QUALIFICATIONS • Requires a High school diploma or equivalent education, • Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist., • Demonstrates effective verbal and written communication skills. PHYSICAL REQUIREMENTS • Moderate physical activity., • Requires handling of average-weight objects up to 50 pounds and pushing, pulling or standing and walking for extended periods of time. The job location is at 2 Lawrence Road, Springfield, NJ 07081 Salary Range:$33.63 To $48.57 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionJob Summary We are seeking an experienced CNC Operator with a minimum of 10 years of hands-on experience in 4-axis and 5-axis machining. The ideal candidate will be highly skilled in CNC setup, operation, and programming, with strong computer literacy and the ability to independently program and optimize machining operations. Familiarity with the equipment, tooling, and manufacturing processes showcased on our website is essential. The successful candidate must possess strong communication skills, attention to detail, and the ability to work effectively within a collaborative manufacturing environment. Key Responsibilities Set up, operate, and monitor 4-axis and 5-axis CNC machines. Program CNC machines using CAM/software platforms and optimize machining processes. Read and interpret engineering drawings, blueprints, and technical specifications. Select appropriate tooling, fixtures, and machining strategies for production requirements. Perform machine adjustments and troubleshoot machining or programming issues. Conduct quality inspections to ensure components meet required tolerances and specifications. Maintain production records and documentation accurately. Collaborate with engineering, production, and quality teams to improve efficiency and workflow. Follow all workplace safety procedures and manufacturing standards. Perform routine machine maintenance and ensure equipment is in proper working condition. Required Qualifications Minimum 10 years of CNC machining experience, specifically with 4-axis and 5-axis equipment. Strong CNC programming experience and ability to independently program parts. High level of computer literacy and familiarity with CNC software/CAM systems. Ability to read and interpret technical drawings and GD&T specifications. Experience with precision machining and tight tolerance work. Strong problem-solving and troubleshooting skills. Excellent communication and teamwork abilities. Ability to work independently with minimal supervision. Preferred Qualifications Experience with advanced machining centers and multi-axis equipment similar to those featured on our website. Knowledge of tooling optimization and process improvement. Experience in aerospace, medical, automotive, or precision manufacturing industries. Technical certification or trade school training in CNC machining or manufacturing technology. Work Environment Manufacturing/shop floor environment. May require standing for extended periods and lifting materials/tools as needed. Commitment to workplace safety and quality standards is essential. Compensation & Benefits Competitive salary based on experience. Opportunities for overtime and career advancement. Benefits package available based on company policy. Company DescriptionW3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more. We’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies. Our Services W3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates. We specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding. We are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software. Our Expertise W3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs. As a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.W3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more.\r\n\r\nWe’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies.\r\n\r\nOur Services\r\nW3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates.\r\n\r\nWe specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding.\r\n\r\nWe are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software.\r\n\r\nOur Expertise\r\nW3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs.\r\n\r\nAs a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.

Job Description ISCAR METALS, INC., a dynamic and innovative cutting tool company, has an immediate opening for a Technical Applications/Sales Representative for the New Jersey area. Preferred candidates will have a minimum of 3-5 years machining & industrial sales experience but we are always willing to train the right individual that has a “can do” attitude. CNC programming experience and a college degree (engineering/industrial focus) is a plus. Like machining? Like optimizing a machine shop process with the best in class cutting tool products? Do you like to compete? If yes, join us in our quest to be #1. Visit us www.iscarmetals.com BENEFITS WE OFFER • Competitive Salary, • Health, Dental and Vision plan, • 401K Retirement Plan, • Paid Vacation, Holiday and Sick time, • Life and Disability InsuranceCompany DescriptionABOUT ISCAR USA ISCAR is a leader in advanced metal cutting solutions, helping American manufacturers achieve greater efficiency, precision, and profitability. As part of the global ISCAR network, we combine world-class innovation with local expertise to deliver cutting tools that redefine performance on the shop floor. Our passion is helping customers do more with less — less cycle time, less waste, and less cost per part. Through continuous research and development, ISCAR offers cutting-edge indexable carbide inserts, end mills, drills and tooling systems designed to push the limits of CNC machining. Every product reflects our commitment to smart tool geometry, stronger, more wear resistant materials, and intelligent design — enabling manufacturers to run faster, cut longer, and finish precisely. Beyond the tools, ISCAR brings true partnership. Our technical teams work side-by-side with customers to optimize toolpaths, improve productivity, and reduce overall machining costs. Whether it’s aerospace, automotive, energy, or general manufacturing, our focus is on delivering measurable results — not just components, but complete machining solutions. At ISCAR, innovation isn’t just a word — it’s how we help American industry stay competitive in a fast-moving world. We’re proud to be the trusted partner behind the tools that keep production strong, efficient, and ready for the challenges of tomorrow. ISCAR promotes creative thinking and productive teamwork to achieve its business objectives within today’s competitive marketplace. Come join our team, where innovation never stops, and job satisfaction is our goal. Iscar provides a full compensation package. ISCAR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, age, gender, sexual orientation, gender identity, religion, national origin, protected veteran status, disability, genetic information, or any other characteristic protected by law.ABOUT ISCAR USA\r\nISCAR is a leader in advanced metal cutting solutions, helping American manufacturers achieve greater efficiency, precision, and profitability. As part of the global ISCAR network, we combine world-class innovation with local expertise to deliver cutting tools that redefine performance on the shop floor.\r\n\r\nOur passion is helping customers do more with less — less cycle time, less waste, and less cost per part. Through continuous research and development, ISCAR offers cutting-edge indexable carbide inserts, end mills, drills and tooling systems designed to push the limits of CNC machining. Every product reflects our commitment to smart tool geometry, stronger, more wear resistant materials, and intelligent design — enabling manufacturers to run faster, cut longer, and finish precisely.\r\n\r\nBeyond the tools, ISCAR brings true partnership. Our technical teams work side-by-side with customers to optimize toolpaths, improve productivity, and reduce overall machining costs. Whether it’s aerospace, automotive, energy, or general manufacturing, our focus is on delivering measurable results — not just components, but complete machining solutions.\r\n\r\nAt ISCAR, innovation isn’t just a word — it’s how we help American industry stay competitive in a fast-moving world. We’re proud to be the trusted partner behind the tools that keep production strong, efficient, and ready for the challenges of tomorrow.\r\n\r\nISCAR promotes creative thinking and productive teamwork to achieve its business objectives within today’s competitive marketplace. Come join our team, where innovation never stops, and job satisfaction is our goal. Iscar provides a full compensation package.\r\n\r\nISCAR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, age, gender, sexual orientation, gender identity, religion, national origin, protected veteran status, disability, genetic information, or any other characteristic protected by law.

Job Description We are seeking a Tool Maker Machinist to provide accurate tools and fixtures to support metal stamping presses. Responsibilities: • Operate machine tools to produce tooling to produce precision parts, • Build and maintain tooling, fixtures, and gages used in production, • Perform routine maintenance on machinery, • Calculate dimensions and tolerance using measuring instruments Qualifications: • Previous experience using manual machinery, i.e. lathe, knee mill, drill press, • Familiarity with heat treating of tooling, • Strong analytical and mathematical skills, • Strong attention to detailCompany DescriptionCustom metal stamper serving Aerospace, Industrial, Commercial and Military Customers. Providing high quality precision parts and assemblies since 1955.Custom metal stamper serving Aerospace, Industrial, Commercial and Military Customers.\r\nProviding high quality precision parts and assemblies since 1955.

Job DescriptionJob Title: Set Up Mechanic Job Description We are seeking a skilled Set Up Mechanic with a strong mechanical aptitude. This role involves working in a dynamic and regulated industry environment, making it an excellent opportunity for individuals with experience in fields such as medical, aerospace, or automotive. The ideal candidate will have 2-4 years of relevant CNC high precision manufacturing experience with tight tolerances. A mechanical certification is a plus, as is experience with centerless grinding. Responsibilities • Program and set up Precision OD & Centerless Grinding Machines., • Read and interpret complex part drawings, turning them into functional parts., • Reduce job costs once in production., • Set up and operate all grinding equipment, including basic setup, tool changing, and minor adjustments to ensure cycle times meet customer quotes., • Use multiple metrology methods to verify part configuration and conformance to print specifications., • Develop tooling and gauging to produce and measure complex part geometries., • Troubleshoot parts during setup and run cycles to meet quoted cycle times., • Ensure daily output is met and machines run on schedule at expected quality levels., • Collaborate with the Contract Review team to provide estimates on new customer parts., • Interface with Quality, Manufacturing, and Engineering personnel to resolve production issues., • Maintain safety standards and comply with standard operating procedures., • Troubleshoot machines and feeder systems, collaborating with external machine tool providers., • Assist with special projects as required., • Perform other related duties as assigned by the manager.Essential Skills, • Machine setup and troubleshooting., • Experience with centerless grinding and CNC setup., • Ability to perform complete setups on CNC grinder types (Gen-5, Gen-X, CAM, Tactic)., • Maintain and operate grinding equipment during production., • Ability to troubleshoot and adjust machinery as needed., • Replace blades and restore machines to production levels., • Comprehensive understanding of the PK4000 for inspection during setup., • Ability to meet production rates.Additional Skills & Qualifications, • Strong mechanical background is essential., • Experience in ISO 9001:2015 and Lean Manufacturing environments., • Ability to solve complex issues during machining., • Skillful in gathering and analyzing information., • Ability to develop alternative solutions and work well in group problem-solving situations., • Experience in precision grinder setup, operation, and editing programs.Why Work Here? Join a strong and stable company that is a leader in manufacturing wire for the medical device industry. Experience the opportunity to grow internally as the company expands operations into new facilities and production areas. Benefit from a family-oriented culture, 12 paid holidays, medical, dental, and vision coverage, as well as a monthly bonus potential. Enjoy a 401k match of 100% for the first 3% and 50% for the next 2%, vested from day one. Work Environment Work in a manufacturing facility with multiple departments. The environment requires attention to detail and adherence to safety standards, providing a challenging yet rewarding work atmosphere. Job Type & Location This is a Permanent position based out of Rahway, NJ. Pay and Benefits The pay range for this position is $62400.00 - $74880.00/yr. 12 paid holidays, medical, dental, vision monthly bonus potential 401k match first 3% at 100% and next 2% at 50%, vested from day one Family culture in place Workplace Type This is a fully onsite position in Rahway,NJ. Application Deadline This position is anticipated to close on Jun 19, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Overview Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here’s what Transcat has to offer— • Work that matters., • A values-based culture where people care about each other and the work they do together., • Flexibility, • Training and development to accelerate learning and career advancement., • Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! We are Searching for— A Maintenance and Reliability Engineer, to serve as a key technical resource supporting clients in optimizing maintenance and reliability programs, driving performance improvements, and sustaining asset health. You will balance hands-on maintenance leadership with analytical reliability strategies that reduce downtime, extend asset life, and improve overall equipment effectiveness (OEE). This is an on-site position with occasional travel up to 25% of the time. You will report directly to our Maintenance and Reliability Service Leader. Responsibilities Essential Duties and Responsibilities • Adhere to stringent regulatory requirements, such as FDA regulations, ensuring all activities and equipment meet industry standards for quality and safety., • Lead and execute preventive and predictive maintenance activities on production, utility, and process equipment., • Conduct data-driven analyses of equipment reliability trends and develop improvement recommendations., • Implement and sustain CMMS processes including PM optimization, asset hierarchies, and work management best practices., • Support and facilitate root-cause analysis (RCA) and corrective action implementation., • Partner with cross-functional teams (engineering, operations, quality, EHS) to align M&R initiatives with business goals., • Support regulatory compliance (FDA, GMP) and ensure documentation meets company and industry standards., • Coordinate vendor and contractor support for maintenance and reliability improvement activities., • Contribute to MRO spare parts management, bill of materials accuracy, and lifecycle cost reduction., • Participate in continuous improvement and digital transformation initiatives leveraging data visualization, AI, or BI tools. Qualifications Required Knowledge, Skills and Abilities • 3 – 5 years of experience in maintenance and/or reliability engineering., • Experience with either SAP or Hexagon is preferred., • Demonstrated experience in preventive and predictive maintenance programs., • Working knowledge of reliability analysis methods and continuous improvement tools., • Proficiency with Computerized Maintenance Management Systems (CMMS)., • Understanding of mechanical, electrical, pneumatic, and hydraulic systems., • Experience with MRO and spare parts management and BOM development., • Knowledge of EHS and GMP regulations., • Familiarity with Business Intelligence tools (Spotfire, Power BI, Tableau) or AI technology., • Strong verbal, written, and presentation skills; proficiency in Microsoft Office platforms (Excel, Word, PowerPoint)., • Able to travel up to 25% of the time. Preferred: • Bachelor’s or Associate degree in a STEM field or trade certification in instrumentation, mechanical, electrical, or related engineering field., • Life Science experience., • Certified Reliability Leader (CRL) or Certified Maintenance & Reliability Professional (CMRP) certification. If this sounds like you, apply today! Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.

Job Description Overview Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here’s what Transcat has to offer— • Work that matters., • A values-based culture where people care about each other and the work they do together., • Flexibility., • Training and development to accelerate learning and career advancement., • Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! We are Searching for— A CMMS Engineer, to support our clients with activities related to the use, operation, migration, or analysis of their Computerized Maintenance Management Systems (CMMS). This is a on-site position with occasional travel up to 25% of the time. You will report directly to our CMMS Service Lead. Responsibilities Essential Duties and Responsibilities— • Project/ Migration, • Perform field walkdowns to verify the accuracy of the equipment data., • Carry out all technical data reviews and data entries in the system., • Translate and cleanse raw data in preparation for Data Migration., • Assist in the preparation of client project status reports and immediately communicate project deviations or delays to the Project Manager., • Meet regularly with all stakeholders to discuss progress, communicate changes, and support the entire change effort., • Assist with other continuous improvement and optimization projects, as required., • BI/ Optimization, • Extract and analyze data using business intelligence tools to aid business decisions., • CMMS Support, • Provide support to end-users in navigating and utilizing the CMMS., • Input and maintain asset and equipment data in the CMMS., • Track client requests and assist with metric and key performance indicators (KPI) reporting., • Other duties as assigned. Qualifications Required Knowledge, Skills and Abilities: • Preferred: Associate degree in a STEM field, or trade certification in instrumentation, mechanical, electrical, or related engineering field., • 1 -3 years’ experience in CMMS-related work (front end). Life Science experience preferred but not required., • Experience with either SAP or Hexagon., • Proficient in MS Office platforms, particularly MS Excel. BI Tool knowledge a distinct advantage., • Familiarity with data management processes (paper-based / digital change control processes)., • Ability to perform field verification / data collection for assets to be added to / changed on the CMMS., • Ability to complete projects on time that meet our quality standards., • Ability to quickly understand new software platforms., • Ability to build data for CMMS systems to the highest level of quality (averaging zero errors consistently)., • Able to travel up to 25% of the time. If this sounds like you, apply today! Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.

Responsible for relaying the customer’s requests to the field and laboratory employees. Be available to meet with customers as well as represents the company at industry functions that could result in improved levels of work from the customer. Responsible for organizing and synchronizing all job r

Job Description At Valcor Engineering Corporation, we design and manufacture advanced fluid control components and systems for the aerospace, nuclear, and scientific industries. Our team is dedicated to innovation, precision, and quality—values that have made us a trusted name for over 70 years. Join a company that’s shaping the future of aerospace technology, one part at a time. Position Summary: We are currently seeking an experienced Deburrer to join our manufacturing team. In this role, you’ll play a critical part in the final preparation of precision aerospace components by removing imperfections and ensuring all parts meet rigorous quality standards. Under general supervision working from blueprints, sketches, verbal and/or written specifications, operates and adjusts manual or numerically controlled machine tools to perform standard and repetitive sequence of operations. Additional job duties are as follows: • Sets up manual machines where speeds, feeds and sequences of tooling operations are ordinarily prescribed, • Operates numerically controlled machines where programs are approved and setups are made and maintained by others., • Removes burrs and rough edges from machine component parts using a variety of hand operations, such as; filing, deburring and performing polishing operations., • Removes scratches, burrs and tool marks from parts, using microscope or magnifier., • Uses standard shop measuring devices., • Sharpens drill tools on grinding wheel as necessary., • Operates automatic welding equipment., • Moves parts and materials to and from work area., • Maintains good housekeeping in work area., • Perform other duties as directed by supervision. Qualifications • Minimum 4 years of experience in a general machine shop environment, • Skilled in deburring and hand-finishing aerospace or high-precision components, • Familiarity with using microscopes or magnifying equipment for detailed work, • Able to read and interpret blueprints and technical drawings, • Experience operating manual shop tools and measuring devices, • Strong eye for detail and commitment to quality, • Dependable, safety-conscious, and team-oriented Salary Range:$29.56 To $33.62 Hourly Why Join Valcor? ✅ Competitive pay & benefits package ✅ Work with cutting-edge aerospace technology ✅ Collaborative, clean, and safety-first work environment ✅ Long-standing company with stability and growth opportunities ✅ Convenient location: 2 Lawrence Road, Springfield, NJ 07081 Job location is at 2 Lawrence Road, Springfield, NJ 07081 Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description CNC MILL MACHINIST / SET UP - All Shifts -- Manufacturing/Machine Shop N.J. Precision Technologies, Inc. – Mountainside, NJ Job Description PLEASE READ BEFORE APPLYING: • MINIMUM 5 YEARS SET-UP EXPERIENCE - CNC MILLING or TURNING SET-UP EXPERIENCE REQUIRED, • FULL TIME : FIRST SHIFT, SECOND SHIFT, THIRD SHIFT, WEEKEND SHIFTS AVAILABLE, • ALL HAAS CNC MACHINES and Kitamura, • STRONG WORKING KNOWLEDGE OF SET-UP TECHNIQUES FOR PRODUCTION AND PROTOTYPE., • STRONG WORKING KNOWLEDGE OF CNC PROGRAMMING AND EDITING WITH G & M CODES OR PROGRAMMING SOFTWARE., • ABILITY TO SET-UP & OPERATE USING VICES OR SIMILAR TOOLING HARDWARE AND FIXTURES., • MUST HAVE EXPERIENCE INSPECTING PARTS AND READING MICROMETER , CALIPER, HEIGHT GAGE AND DIAL INDICATOR, • BLUEPRINT READING A MUST., • FAST PACED ENVIRONMENT. Summary Established, ISO-certified contract manufacturer seeking full-time, dedicated CNC MACHINIST for an ultra-high tech, All Haas CNC Mill department. Primarily working in the Aerospace and Medical device industries. Employees receive top pay and benefits, including medical, prescription, dental, vision, 401K with match, etc. Our modern, air-conditioned facility is located in Mountainside, N.J. Responsibilities • Performs SET UP, PROGRAM TEST, FIRST PIECE "PROVE-OUT" RUN, in-process inspections, and CNC of precision-machined parts., • Works with production and engineering teams to address and resolve production issues in CNC Milling., • Responsible for selecting correct tooling hardware and measurement equipment., • Responsible for ensuring that the machines are well maintained ., • Working in accordance with ISO requirements., • Must be able to work independently. Requirements • Education: High school diploma or GED., • Experience: Minimum 5 years CNC Machining / Milling experience in a machine shop or manufacturing environment., • Measurement and inspection skills a must., • Strong knowledge of Blueprint reading with GD&T required., • Working within the ISO 9001 quality standard required. Skills, Knowledge, Abilities • Must have a strong aptitude in mechanical blueprints and drawings, • Must have a working knowledge of CAD systems., • Must be very detail oriented., • Strong math skills., • Ability to follow process plans, routers and inspection plans., • Has a strong background with workplace safety, OSHA regulations., • Must be able to effectively communicate with employees of varying education levels., • Comfortable working with very tight , "tenths" tolerances., • Must be experienced in measuring tools such as micrometers, calipers, height gage, dial indicators. ------------------------------------------------------------ 1.0 JOB DESCRIPTION SUMMARY 1.1 This position establishes the authority, reporting relationships, tasks and duties with performance standards for the CNC Specialist. 2.0 JOB TITLE 2.1 CNC Specialist 3.0 REPORTING RELATIONSHIPS 3.1 The CNC Specialist reports to the CNC Manager. 4.0 REQUIREMENTS 4.1 Education Required: High School diploma or GED. Preferred: Vocational School Certificate / Associates degree in Mechanical, MFG, IND Engineering technology. 4.2 Licensing, Registration, and certification Required: None. Preferred: None. 4.3 Experience Required: A minimum of one year experience in CNC or tooling production. 4.4 Skills, Knowledge, Abilities 4.4.1 Must have strong math skills. 4.4.2 Ability to read and understand engineering drawings. 4.4.3 Must be able to effectively communicate with other employees of varying education levels. 4.5 Physical Requirements 4.5 The physical requirements are stressful with the majority of time spent standing working with machinery. This position requires manual dexterity of the hands and the normal bending and twisting associated with plant operations. Walking, turning the head and torso, reaching, grasping, bending, stooping, kneeling and flexing the arms, legs, wrists, and fingers and the ability to lift at least forty (40) pounds. Must be able to work in areas with moderate to high noise levels. Must be able to constantly kneel, squat, climb and have full bending abilities at the waist (touch the toes). The body senses of sight (not color blind), hearing (safety) is required. Good vision to read diagrams and business documents. Must be able to wear safety glasses and hearing protection for prolong periods of time. 4.6 Mental: Basic math skills, mechanical engineering understanding, blueprint reading, as well as reading, writing and spelling and the ability to communicate clearly and effectively in English. 5.0 WORKING CONDITIONS 5.1 The majority of the time (95%) will be spent in a non-smoking plant environment. Temperatures will remain consistent throughout the year. Noise levels will be high in the plant area and moderate in the office area. Work hours will be dependant upon the weekly production and shipping schedules. Work hours may be long when specific projects are due, therefore, some extended schedules will be necessary. 6.0 TASKS AND DUTIES 6.1 Responsible for the proper operation of the machines. 6.2 Responsible for performing the daily machine set up process – clean the machine, complete the set up the machine for the first job. 6.3 Responsible for producing high quality finished products in accordance with the customer’s requirements. 6.4 Responsible for completing the job within the allotted job budget dollars. 6.5 Completes the bead blasting process when necessary. 6.6 Responsible for the proper operation and maintenance of the machines. Ensures the machine is maintained on a preventative basis. 6.7 Responsible for the machine programming functions. 6.8 Responsible for performing a quality control check on all jobs. 6.9 Responsible for setting up the machines for optimized speed and performance. 6.10 Responsible for completing the work in a safe manner. 6.11 Responsible for ensuring the shop area is clean and organized. 6.12 Responsible for accurately recording the time spent against the appropriate job. 6.13 Responsible for completing the work in accordance with ISO 9000 standards. 6.14 Responsible for working closely with the Manager with the development and implementation of the agreed upon training plan and schedule. 6.15 Ensures personal adherence to the company policies and practices. 6.16 Performs any other duties as may be assigned by the Manager. 7.0 MEASUREMENTS OF PERFORMANCE 7.1 Ability to produce each job in accordance with the customer’s requirements. 7.2 Ability to produce each job in accordance with the allotted number of production hours and optimize. 7.3 Ability to set-up as per the plot/print/router/set-up sheets in a timely manner. 7.4 Ability to edit programs (G & Mo codes and/or Mastercam) for efficient and practical parts production. 7.5 Ability to transmit program from database to local PC and to machines. 7.6 Ability to account and record the hours spent per job. 7.7 Consistently maintains the work area in a clean, organized and professional manner – ie: clean floors, machines, tools secured, etc. 7.8 Ability to work with minimal supervision. 7.9 Ability to service and maintain the machines to eliminate/minimize machine downtime 7.10 Ability to adhere to the company’s policies and procedures. 7.11 Has demonstrated a working knowledge level of the standard operating procedures as defined by ISO 9000. 7.12 Ability to work within the company’s safety practices and procedures. 7.13 Ability to complete the assigned training schedule. ------------------------------------------------------------------------------------------ Company DescriptionNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. Please visit our Website: www.njpt.comNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. \r\nPlease visit our Website: www.njpt.com

The ideal candidate will have a Bachelor's degree in Engineering and at least 4-5 years of experience in the aerospace industry.

The ideal candidate will have a Bachelor's degree in Engineering and at least 4-5 years of experience in the aerospace industry.

Job Description Technician A Technician performs the assembly, testing, and verification of advanced fluid‐control components for Aerospace, Nuclear and other applications. This role is ideal for a hands‐on technician who thrives in a precision manufacturing environment and enjoys working with complex electro‐mechanical systems. Key Responsibilities • Perform assembly and performance testing of mechanical and/or electro‐mechanical fluid‐control devices in accordance with engineering procedures, blueprints, and schematics., • Operate, maintain, and help develop high‐pressure test systems, including pneumatic, hydraulic, and calibration‐fluid test stands and pumps., • Conduct electrical testing and verification using a variety of electronic diagnostic tools., • Work within controlled clean‐room environments and conduct particulate analysis with accurate data collection., • Troubleshoot, repair, and validate hardware using systematic diagnostic methods., • Utilize oscilloscopes, and other diagnostic equipment to support testing and analysis., • Maintain a clean, safe, and organized work area., • Lift and move equipment or components up to 50 lbs as needed. Required Skills & Experience • Minimum 5 years of technical or mechanical maintenance experience., • Experience using various hand and measurement tools including but not limited to torque wrenches, height gauges, and calipers., • Ability to read and interpret blueprints, schematics, and technical procedures., • Proven experience assembling and testing electro‐mechanical hardware., • Hands‐on experience with high‐pressure fluid, gas, and cryogenic testing., • Proficiency in electrical testing, including dielectric and insulation‐resistance testing., • Strong computer literacy, including Microsoft Word and Excel., • Experience working in clean‐room environments., • Manufacturing or machining experience is a plus., • Demonstrated ability to troubleshoot and repair hardware using diagnostic tools. Education • Minimum: High School Diploma, • Preferred: Vocational school graduate, Associate Degree or Certificate in Engineering Technology Additional Considerations • Strong team orientation and ability to collaborate across functions., • Capable of working independently with minimal supervision., • Willingness to mentor junior technicians. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Salary Range:$34.00 To $50.00 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description At the direction of the Sr. Manager of Plant and Facilities, support all corporate facilities and its equipment including, HVAC, CD Air and test gas compressors, basic electrical work, high pressure plumbing, basic plumbing, basic construction, and perform special projects in support of growth and expansion for the Corporation. Deploy to troubleshoot and or diagnose and repair equipment and issues in all facilities throughout the corporation. Make assessments that may be used to determine the course of action for service and repairs from outside contractors if needed. Handle emergency service and repair issues following appropriate evaluations. REQUISITE SKILLS REQUIRED • Skilled in assessing industrial grade plumbing issues for potable water, cooling water and wastewater., • Skilled in troubleshooting Industrial grade plumbing for high purity gases at ultra-high pressure., • Skilled in advanced level troubleshooting and diagnosis of commercial/industrial HVAC systems to make service and/or repair recommendations., • Learn to help diagnose problems with CNC Machines., • Skilled in industrial high voltage electrical work, and troubleshooting, diagnosis, and Installation of electrical services. MINIMUM QUALIFICATIONS 5+ years’ experience in the field of facilities support EQUIPIMENT/MACHINERY USED Strong knowledge in hydraulic, pneumatic, and electronic control systems and components Salary Range:$27.00 To $50.00 Hourly PHYSICAL REQUIREMENTS Lifting up to 50 lbs. regularly Pushing, pulling, standing for long periods of time, manual dexterity, and visual acuity All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Controller For Aerospace And Communications Business Unit/h2pAnalog Devices, Inc.NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge.ADI combines analog, digital, and software technologies into solutions that hel

Technical Sales Manager - Aerospace. A growing company in business for 70+ years with around 400+ employees in their plant needs a Technical Sales Manager - Aerospace. Job Title: Technical Sales Manager Aerospace.

Note 1: This position requires a hands-on person coming from high precision (low volume) Solenoid Valve manufacturing business in the aerospace Industry. Note 2: This person will be Managing Projects and Programs for Solenoid Valve Manufacturing in the Aerospace industry. Manage Projects and Program

Reporting to the Manager of Operational Excellence, he/she will assist in facilitating continuous improvement events through the use of Op Ex tools rooted in TPS principles. Operational Excellence/Continuous Improvement/Lean Manufacturing experience in aerospace, aviation or defense industries. Keyw

GE Aerospace is an Equal Opportunity Employer. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotio

Aerospace & Defense Account/Business Development Manager. This position is goal oriented involving the sales, maintenance, and development of the overall customer accounts within the Aerospace & Defense (A&D) industry. Job Summary: As an Aerospace & Defense Account/Business Development Manager, you

Job Summary: As an Aerospace & Defense Account/Business Development Manager, you will be responsible for building and maintaining relationships with external programs, while collaborating with the recruitment team for ongoing success. Operate as the lead point of contact for all matters specific to

Our client is seeking an experienced Business Analyst to support strategic, operational, and financial initiatives within a fast‑moving aerospace and defense environment. Ensure alignment with aerospace/defense regulatory, operational, and supply chain requirements. Experience supporting governmen

KEY RESPONSIBILITIES Conduct financial modeling, operational analysis, and business performance evaluations to support strategic decision-making Analyze complex datasets using tools such as Excel, Power BI, Tableau, or similar analytics platforms to identify trends and improvement opportunities Supp

Business Analyst – Aerospace & Defense Company Overview: Join a leading aerospace and defense organization driving innovation and operational excellence in highly regulated environments. We deliver critical programs with precision, supporting commercial aerospace, defense projects, and government

AI data lab for training frontier models and evaluating AI agents.Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more.AI systems learn, reason, and perform.Our platform identifies and vets top talent through an AI recruiter

At Lincoln Electric Products Co.Service and Distribution Switchboards: Up to 8000A.Single and Double-Ended Substations.We pride ourselves on delivering high-quality, custom-designed solutions that address the unique needs of our clients across various industries.This role is available immediately an

We are offering an exciting opportunity for a Senior Engineer/ Project Manager to join our Morristown, NJ office.With over 139 years of experience, H&H is a trusted full-service infrastructure engineering firm.Our clients, including infrastructure owners, contractors, and colleagues, rely on us for

HVAC Project Manager position with a large mechanical and plumbing construction company.We are a large growing mechanical contractor that works on many large mechanical hvac and plumbing projects.This is a full-time position with great benefits, retirement package, and plenty of room for career grow

At AECOM, we're delivering a better world.Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive.We are the world's trusted infrastructure consulting firm, partnering with clients to solve the wor

At StructureCare, we don’t just restore parking garages, we protect what supports everything else.As a national leader in parking structure engineering, repair, and maintenance, we’ve worked on more than 600 facilities of every construction type.Engineer smart solutions, prevent problems before

Project management, mechanical design, field investigations, leading junior staff, HVAC load studies, coordination with clients/code officials, scheduling, budgeting, resource management, QA/QC, team leadership, proposal development.Submit your resume to be considered for this leadership opportunity

Matrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm.This powerhouse organization offers an extensive range of services aimed at revolutionizing the built

As a Lead Project Manager, you are responsible for independently managing a diverse range of integrated projects from planning and kickoff through successful completion.You ensure the smooth execution of all assigned projects and are recognized as a reliable, proactive force within the project manag

At StructureCare, we don’t just restore parking garages, we protect what supports everything else.As a national leader in parking structure engineering, repair, and maintenance, we’ve worked on more than 600 facilities of every construction type.Engineer smart solutions, prevent problems before