Trabajos aerospace en Syracuse, NYCrear alertas

Job Description The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations. Job Functions: • Experienced quality individual in dimensional and visual inspection of aerospace machined components, • Experience in performing FAI’s – AS9102 (The SI will verify supplier’s FAI, not perform them), • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • MS Outlook, and EXCEL experience, • Mechanical inspection experience preferred, • Strong verbal, written and communication skills, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Work as an effective team member, • Establish and maintain effective working relationships, • Fluent English – reading and writing is required, • Pass pre-hire background check including DMV and credit screening, • Pass Pre-hire Drug Screening, • The work is performed under general supervision, • Valid drivers' license and auto insurance required, • 3+ years’ experience as a quality inspector, technician, or engineer., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Outlook and Excel, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be considered BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded), • Additional $750 paid upon referral’s full completion of 90 days’ employment Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Powered by JazzHR 73UI5oulNr

Job Description Senior Accountant Location: Remote Job ID: #71484 Pay Range: $50-59 The deadline to apply is 09/12/2025 (Subject to change) Remote Expectations 8-hour days, Monday-Friday, flexible start 7a-6p EST Overview This contractor will be supervised by the Operational Accounting Management Team based in Syracuse, NY which is part of the HVAC Segment Controllership team. This position will support the monthly financial closing processes with an additional emphasis on balance sheet reconciliations/analysis, supporting key inventory accounting processes, and participating in tasks related to key strategic projects impacting operational accounting. Responsibilities: • Support the month-end financial statement closing process including assisting team members throughout their duties including preparing journal entries, • Preparation for month-end account reconciliations, • Analysis of key balance sheet accounts and reserves, • Support key inventory accounting processes such as LIFO, PII (Profit-In-Inventory) Elims, Tariffs, Consignment, E&O, Physical Inventories, and SNB (Shipped Not Billed)/Warehouse Cutoff accruals, • Assist with SOX and internal/external audit requests, • Participate in the testing of cross-functional strategic projects as requested PLEASE DO NOT SUBMIT A RESUME WITHOUT THE FOLLOWING: • Bachelor's degree, 8+ years' experience, • SAP ECC6 experience required, • Finished Goods inventory experience required Additional Qualifications: • Bachelor's degree in Accounting preferred, • Master's degree in Accounting preferred, • CPA preferred, • Experience with HFM preferred, • Strong analytical, problem solving, and organizational skills with attention to detail, • Excellent communication skills (written and verbal), • Self-driven with the ability to work independently in a dynamic environment, • Proficiency with Microsoft Office (Excel, Word, PowerPoint, Access) Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at #ZR

Job Description Chipton-Ross is seeking a Manufacturing Engineer for an onsite contract opening in Syracuse, NY. REQUIREMENTS Must be self-starter and take initiative on projects. Must work well with cross-functional teams. Bachelors Degree is Required. Prefer candidates with 10 years of industrial experience Aerospace Degrees are not eligible, this is not an Aerospace position. RESPONSIBILITIES Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Must be self-starter and take initiative on projects. Must work well with cross-functional teams. Green Belt and/or Lean Manufacturing understanding desired. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that improve product performance. May help incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations. DESIRED Hiring Manager would consider early career candidates with a Manufacturing, Mechanical, or Industrial Engineering Degree and at least 5-7 years of hands on experience Green Belt and/or Lean Manufacturing understanding desired. EDUCATION Bachelor's Degree is Required SHIFT 4/10 - 1st Shift

Job Description Required IPC 600, 610, 620 certification and experience The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations. Job Functions: • Experienced quality individual in dimensional and visual inspection of aerospace machined components, • Experience in performing FAI’s – AS9102 (The SI will verify supplier’s FAI, not perform them), • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • MS Outlook, and EXCEL experience, • Mechanical inspection experince preferred, • Strong verbal, written and communication skills, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Work as an effective team member, • Establish and maintain effective working relationships, • Fluent English – reading and writing is required, • Pass pre-hire background check including DMV and credit screening, • Pass Pre-hire Drug Screening Supervision Received:, • The work is performed under general supervision, • U.S. Citizenship required Preferred Education and Skills (including certifications): • 3+ years’ experience as a quality inspector, technician, or engineer., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Outlook and Excel, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be considered, • 12 days paid vacation first year, increasing with service years, • 6 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Company DescriptionTRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Thank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications. TRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans. NOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,TRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain.\r\n\r\nThank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications.\r\n\r\nTRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans.\r\n\r\nNOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,

Join Our Team as a Quality Engineer at Superior Metals Manufacturing! About the Role: Superior Metals Manufacturing is seeking a highly motivated and detail-oriented Quality Engineer to join our team in Chittenango, NY. This role is integral to our commitment to manufacturing excellence and customer satisfaction. The Quality Engineer will work closely with internal departments, suppliers, and customer representatives to ensure compliance with quality standards and regulatory requirements. In this role, you will champion our Business Management System (BMS) and Advanced Quality System (AQS), driving continuous improvement initiatives and fostering a culture of quality throughout the organization. Location: Chittenango, NY (On-site) Employment Type: Full-Time Salary: $80,000 - $100,000, but will be evaluated depending on candidates’ knowledge, skills, and abilities. Key Responsibilities: • Serve as the primary quality assurance contact for assigned customers, ensuring proactive communication and resolution of quality-related issues., • Lead and coordinate technical quality efforts across engineering, manufacturing, and purchasing teams to meet and exceed customer expectations., • Conduct and support customer product, system, and qualification audits, ensuring accurate and timely documentation., • Assist in the review and disposition of customer contracts, specifications, purchase orders, and technical documentation., • Develop, implement, and monitor Corrective and Preventative Action (CAPA) plans to address nonconformances and prevent recurrence., • Actively participate in risk assessments, process improvement initiatives, and root cause analysis activities., • Promote and support continuous improvement through lean methodologies, quality training, and cross-functional collaboration., • Maintain up-to-date knowledge of industry standards and technological advancements in quality systems and analytical tools., • Support internal and external audit activities, including AS9100, NADCAP, ISO17025, and A2LA audits., • Contribute to internal quality metrics and reporting to track progress against goals., • Support the development and implementation of operational training structures; ensure all employees complete required training and remain compliant with quality standards and procedures., • Provide input for quote reviews, inspection planning, and development of shop floor instructions., • Bachelor’s degree in Engineering, Quality, or a related technical discipline, OR an equivalent combination of education and experience., • Minimum 2 years of experience in a quality engineering or quality systems role within a manufacturing environment., • In-depth knowledge of quality standards and frameworks, including AS9100, NADCAP, ISO17025, and A2LA., • Proficiency in quality tools and methodologies such as root cause analysis, FMEA, 5 Whys, Pareto analysis, and control plans., • Strong analytical and problem-solving skills, with the ability to interpret complex technical documents and specifications., • Excellent communication skills, with the ability to collaborate effectively across departments and with external stakeholders., • Demonstrated ability to manage multiple priorities in a fast-paced, deadline-driven environment., • Proficiency in Microsoft Office Suite and familiarity with ERP and quality management systems., • 3–5 years of experience in the aerospace, investment casting, or metal manufacturing industry., • Working knowledge of Six Sigma, Lean Manufacturing, or Theory of Constraints (TOC) principles., • Experience with contract review, inspection planning, and regulatory compliance in a customer-facing role., • ASQ certification (CQE, CQA, or similar) is a strong plus., • Key Relationships, • Collaborate with the Quality Manager, Lab Manager, Sales Manager, Process Engineers, and Manufacturing Leaders At Superior Metals Manufacturing, we take pride in more than just what we make—we take pride in how we make it. By joining our team, you'll be part of a dynamic and growing company where innovation, craftsmanship, and quality are at the heart of our culture. We foster an environment of collaboration and continuous learning, where every team member’s voice matters and contributions are valued. Whether you're developing cutting-edge aerospace components or streamlining a process on the production floor, you’ll be making an impact every day. We offer: Innovative Environment: Work in a state-of-the-art melt shop. Collaborative Environment: Work alongside dedicated professionals in a supportive, team-oriented setting. Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities. Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, paid vacation, bonuses and more. Ready to shape the future of manufacturing quality? Apply today and bring your precision and passion to a team where your impact matters. About Us: Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a non-management position This is a full time position

Join Our Team as a Quality Engineer at Superior Metals Manufacturing! About the Role: Superior Metals Manufacturing is seeking a highly motivated and detail-oriented Quality Engineer to join our team in Chittenango, NY. This role is integral to our commitment to manufacturing excellence and customer satisfaction. The Quality Engineer will work closely with internal departments, suppliers, and customer representatives to ensure compliance with quality standards and regulatory requirements. In this role, you will champion our Business Management System (BMS) and Advanced Quality System (AQS), driving continuous improvement initiatives and fostering a culture of quality throughout the organization. Location: Chittenango, NY (On-site) Employment Type: Full-Time Salary: $80,000 - $100,000, but will be evaluated depending on candidates’ knowledge, skills, and abilities. Key Responsibilities: • Serve as the primary quality assurance contact for assigned customers, ensuring proactive communication and resolution of quality-related issues., • Lead and coordinate technical quality efforts across engineering, manufacturing, and purchasing teams to meet and exceed customer expectations., • Conduct and support customer product, system, and qualification audits, ensuring accurate and timely documentation., • Assist in the review and disposition of customer contracts, specifications, purchase orders, and technical documentation., • Develop, implement, and monitor Corrective and Preventative Action (CAPA) plans to address nonconformances and prevent recurrence., • Actively participate in risk assessments, process improvement initiatives, and root cause analysis activities., • Promote and support continuous improvement through lean methodologies, quality training, and cross-functional collaboration., • Maintain up-to-date knowledge of industry standards and technological advancements in quality systems and analytical tools., • Support internal and external audit activities, including AS9100, NADCAP, ISO17025, and A2LA audits., • Contribute to internal quality metrics and reporting to track progress against goals., • Support the development and implementation of operational training structures; ensure all employees complete required training and remain compliant with quality standards and procedures., • Provide input for quote reviews, inspection planning, and development of shop floor instructions., • Bachelor’s degree in Engineering, Quality, or a related technical discipline, OR an equivalent combination of education and experience., • Minimum 2 years of experience in a quality engineering or quality systems role within a manufacturing environment., • In-depth knowledge of quality standards and frameworks, including AS9100, NADCAP, ISO17025, and A2LA., • Proficiency in quality tools and methodologies such as root cause analysis, FMEA, 5 Whys, Pareto analysis, and control plans., • Strong analytical and problem-solving skills, with the ability to interpret complex technical documents and specifications., • Excellent communication skills, with the ability to collaborate effectively across departments and with external stakeholders., • Demonstrated ability to manage multiple priorities in a fast-paced, deadline-driven environment., • Proficiency in Microsoft Office Suite and familiarity with ERP and quality management systems., • 3–5 years of experience in the aerospace, investment casting, or metal manufacturing industry., • Working knowledge of Six Sigma, Lean Manufacturing, or Theory of Constraints (TOC) principles., • Experience with contract review, inspection planning, and regulatory compliance in a customer-facing role., • ASQ certification (CQE, CQA, or similar) is a strong plus., • Key Relationships, • Collaborate with the Quality Manager, Lab Manager, Sales Manager, Process Engineers, and Manufacturing Leaders At Superior Metals Manufacturing, we take pride in more than just what we make—we take pride in how we make it. By joining our team, you'll be part of a dynamic and growing company where innovation, craftsmanship, and quality are at the heart of our culture. We foster an environment of collaboration and continuous learning, where every team member’s voice matters and contributions are valued. Whether you're developing cutting-edge aerospace components or streamlining a process on the production floor, you’ll be making an impact every day. We offer: Innovative Environment: Work in a state-of-the-art melt shop. Collaborative Environment: Work alongside dedicated professionals in a supportive, team-oriented setting. Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities. Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, paid vacation, bonuses and more. Ready to shape the future of manufacturing quality? Apply today and bring your precision and passion to a team where your impact matters. About Us: Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a non-management position This is a full time position

Join Our Team as a Quality Engineer at Superior Metals Manufacturing! About the Role: Superior Metals Manufacturing is seeking a highly motivated and detail-oriented Quality Engineer to join our team in Chittenango, NY. This role is integral to our commitment to manufacturing excellence and customer satisfaction. The Quality Engineer will work closely with internal departments, suppliers, and customer representatives to ensure compliance with quality standards and regulatory requirements. In this role, you will champion our Business Management System (BMS) and Advanced Quality System (AQS), driving continuous improvement initiatives and fostering a culture of quality throughout the organization. Location: Chittenango, NY (On-site) Employment Type: Full-Time Salary: $80,000 - $100,000, but will be evaluated depending on candidates’ knowledge, skills, and abilities. Key Responsibilities: • Serve as the primary quality assurance contact for assigned customers, ensuring proactive communication and resolution of quality-related issues., • Lead and coordinate technical quality efforts across engineering, manufacturing, and purchasing teams to meet and exceed customer expectations., • Conduct and support customer product, system, and qualification audits, ensuring accurate and timely documentation., • Assist in the review and disposition of customer contracts, specifications, purchase orders, and technical documentation., • Develop, implement, and monitor Corrective and Preventative Action (CAPA) plans to address nonconformances and prevent recurrence., • Actively participate in risk assessments, process improvement initiatives, and root cause analysis activities., • Promote and support continuous improvement through lean methodologies, quality training, and cross-functional collaboration., • Maintain up-to-date knowledge of industry standards and technological advancements in quality systems and analytical tools., • Support internal and external audit activities, including AS9100, NADCAP, ISO17025, and A2LA audits., • Contribute to internal quality metrics and reporting to track progress against goals., • Support the development and implementation of operational training structures; ensure all employees complete required training and remain compliant with quality standards and procedures., • Provide input for quote reviews, inspection planning, and development of shop floor instructions., • Bachelor’s degree in Engineering, Quality, or a related technical discipline, OR an equivalent combination of education and experience., • Minimum 2 years of experience in a quality engineering or quality systems role within a manufacturing environment., • In-depth knowledge of quality standards and frameworks, including AS9100, NADCAP, ISO17025, and A2LA., • Proficiency in quality tools and methodologies such as root cause analysis, FMEA, 5 Whys, Pareto analysis, and control plans., • Strong analytical and problem-solving skills, with the ability to interpret complex technical documents and specifications., • Excellent communication skills, with the ability to collaborate effectively across departments and with external stakeholders., • Demonstrated ability to manage multiple priorities in a fast-paced, deadline-driven environment., • Proficiency in Microsoft Office Suite and familiarity with ERP and quality management systems., • 3–5 years of experience in the aerospace, investment casting, or metal manufacturing industry., • Working knowledge of Six Sigma, Lean Manufacturing, or Theory of Constraints (TOC) principles., • Experience with contract review, inspection planning, and regulatory compliance in a customer-facing role., • ASQ certification (CQE, CQA, or similar) is a strong plus., • Key Relationships, • Collaborate with the Quality Manager, Lab Manager, Sales Manager, Process Engineers, and Manufacturing Leaders At Superior Metals Manufacturing, we take pride in more than just what we make—we take pride in how we make it. By joining our team, you'll be part of a dynamic and growing company where innovation, craftsmanship, and quality are at the heart of our culture. We foster an environment of collaboration and continuous learning, where every team member’s voice matters and contributions are valued. Whether you're developing cutting-edge aerospace components or streamlining a process on the production floor, you’ll be making an impact every day. We offer: Innovative Environment: Work in a state-of-the-art melt shop. Collaborative Environment: Work alongside dedicated professionals in a supportive, team-oriented setting. Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities. Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, paid vacation, bonuses and more. Ready to shape the future of manufacturing quality? Apply today and bring your precision and passion to a team where your impact matters. About Us: Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a non-management position This is a full time position

Join Our Team as a Quality Engineer at Superior Metals Manufacturing! About the Role: Superior Metals Manufacturing is seeking a highly motivated and detail-oriented Quality Engineer to join our team in Chittenango, NY. This role is integral to our commitment to manufacturing excellence and customer satisfaction. The Quality Engineer will work closely with internal departments, suppliers, and customer representatives to ensure compliance with quality standards and regulatory requirements. In this role, you will champion our Business Management System (BMS) and Advanced Quality System (AQS), driving continuous improvement initiatives and fostering a culture of quality throughout the organization. Location: Chittenango, NY (On-site) Employment Type: Full-Time Salary: $80,000 - $100,000, but will be evaluated depending on candidates’ knowledge, skills, and abilities. Key Responsibilities: • Serve as the primary quality assurance contact for assigned customers, ensuring proactive communication and resolution of quality-related issues., • Lead and coordinate technical quality efforts across engineering, manufacturing, and purchasing teams to meet and exceed customer expectations., • Conduct and support customer product, system, and qualification audits, ensuring accurate and timely documentation., • Assist in the review and disposition of customer contracts, specifications, purchase orders, and technical documentation., • Develop, implement, and monitor Corrective and Preventative Action (CAPA) plans to address nonconformances and prevent recurrence., • Actively participate in risk assessments, process improvement initiatives, and root cause analysis activities., • Promote and support continuous improvement through lean methodologies, quality training, and cross-functional collaboration., • Maintain up-to-date knowledge of industry standards and technological advancements in quality systems and analytical tools., • Support internal and external audit activities, including AS9100, NADCAP, ISO17025, and A2LA audits., • Contribute to internal quality metrics and reporting to track progress against goals., • Support the development and implementation of operational training structures; ensure all employees complete required training and remain compliant with quality standards and procedures., • Provide input for quote reviews, inspection planning, and development of shop floor instructions., • Bachelor’s degree in Engineering, Quality, or a related technical discipline, OR an equivalent combination of education and experience., • Minimum 2 years of experience in a quality engineering or quality systems role within a manufacturing environment., • In-depth knowledge of quality standards and frameworks, including AS9100, NADCAP, ISO17025, and A2LA., • Proficiency in quality tools and methodologies such as root cause analysis, FMEA, 5 Whys, Pareto analysis, and control plans., • Strong analytical and problem-solving skills, with the ability to interpret complex technical documents and specifications., • Excellent communication skills, with the ability to collaborate effectively across departments and with external stakeholders., • Demonstrated ability to manage multiple priorities in a fast-paced, deadline-driven environment., • Proficiency in Microsoft Office Suite and familiarity with ERP and quality management systems., • 3–5 years of experience in the aerospace, investment casting, or metal manufacturing industry., • Working knowledge of Six Sigma, Lean Manufacturing, or Theory of Constraints (TOC) principles., • Experience with contract review, inspection planning, and regulatory compliance in a customer-facing role., • ASQ certification (CQE, CQA, or similar) is a strong plus., • Key Relationships, • Collaborate with the Quality Manager, Lab Manager, Sales Manager, Process Engineers, and Manufacturing Leaders At Superior Metals Manufacturing, we take pride in more than just what we make—we take pride in how we make it. By joining our team, you'll be part of a dynamic and growing company where innovation, craftsmanship, and quality are at the heart of our culture. We foster an environment of collaboration and continuous learning, where every team member’s voice matters and contributions are valued. Whether you're developing cutting-edge aerospace components or streamlining a process on the production floor, you’ll be making an impact every day. We offer: Innovative Environment: Work in a state-of-the-art melt shop. Collaborative Environment: Work alongside dedicated professionals in a supportive, team-oriented setting. Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities. Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, paid vacation, bonuses and more. Ready to shape the future of manufacturing quality? Apply today and bring your precision and passion to a team where your impact matters. About Us: Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a non-management position This is a full time position

Join Our Team as a Quality Engineer at Superior Metals Manufacturing! About the Role: Superior Metals Manufacturing is seeking a highly motivated and detail-oriented Quality Engineer to join our team in Chittenango, NY. This role is integral to our commitment to manufacturing excellence and customer satisfaction. The Quality Engineer will work closely with internal departments, suppliers, and customer representatives to ensure compliance with quality standards and regulatory requirements. In this role, you will champion our Business Management System (BMS) and Advanced Quality System (AQS), driving continuous improvement initiatives and fostering a culture of quality throughout the organization. Location: Chittenango, NY (On-site) Employment Type: Full-Time Salary: $80,000 - $100,000, but will be evaluated depending on candidates’ knowledge, skills, and abilities. Key Responsibilities: • Serve as the primary quality assurance contact for assigned customers, ensuring proactive communication and resolution of quality-related issues., • Lead and coordinate technical quality efforts across engineering, manufacturing, and purchasing teams to meet and exceed customer expectations., • Conduct and support customer product, system, and qualification audits, ensuring accurate and timely documentation., • Assist in the review and disposition of customer contracts, specifications, purchase orders, and technical documentation., • Develop, implement, and monitor Corrective and Preventative Action (CAPA) plans to address nonconformances and prevent recurrence., • Actively participate in risk assessments, process improvement initiatives, and root cause analysis activities., • Promote and support continuous improvement through lean methodologies, quality training, and cross-functional collaboration., • Maintain up-to-date knowledge of industry standards and technological advancements in quality systems and analytical tools., • Support internal and external audit activities, including AS9100, NADCAP, ISO17025, and A2LA audits., • Contribute to internal quality metrics and reporting to track progress against goals., • Support the development and implementation of operational training structures; ensure all employees complete required training and remain compliant with quality standards and procedures., • Provide input for quote reviews, inspection planning, and development of shop floor instructions., • Bachelor’s degree in Engineering, Quality, or a related technical discipline, OR an equivalent combination of education and experience., • Minimum 2 years of experience in a quality engineering or quality systems role within a manufacturing environment., • In-depth knowledge of quality standards and frameworks, including AS9100, NADCAP, ISO17025, and A2LA., • Proficiency in quality tools and methodologies such as root cause analysis, FMEA, 5 Whys, Pareto analysis, and control plans., • Strong analytical and problem-solving skills, with the ability to interpret complex technical documents and specifications., • Excellent communication skills, with the ability to collaborate effectively across departments and with external stakeholders., • Demonstrated ability to manage multiple priorities in a fast-paced, deadline-driven environment., • Proficiency in Microsoft Office Suite and familiarity with ERP and quality management systems., • 3–5 years of experience in the aerospace, investment casting, or metal manufacturing industry., • Working knowledge of Six Sigma, Lean Manufacturing, or Theory of Constraints (TOC) principles., • Experience with contract review, inspection planning, and regulatory compliance in a customer-facing role., • ASQ certification (CQE, CQA, or similar) is a strong plus., • Key Relationships, • Collaborate with the Quality Manager, Lab Manager, Sales Manager, Process Engineers, and Manufacturing Leaders At Superior Metals Manufacturing, we take pride in more than just what we make—we take pride in how we make it. By joining our team, you'll be part of a dynamic and growing company where innovation, craftsmanship, and quality are at the heart of our culture. We foster an environment of collaboration and continuous learning, where every team member’s voice matters and contributions are valued. Whether you're developing cutting-edge aerospace components or streamlining a process on the production floor, you’ll be making an impact every day. We offer: Innovative Environment: Work in a state-of-the-art melt shop. Collaborative Environment: Work alongside dedicated professionals in a supportive, team-oriented setting. Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities. Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, paid vacation, bonuses and more. Ready to shape the future of manufacturing quality? Apply today and bring your precision and passion to a team where your impact matters. About Us: Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a non-management position This is a full time position

Join Our Team as a Quality Engineer at Superior Metals Manufacturing! About the Role: Superior Metals Manufacturing is seeking a highly motivated and detail-oriented Quality Engineer to join our team in Chittenango, NY. This role is integral to our commitment to manufacturing excellence and customer satisfaction. The Quality Engineer will work closely with internal departments, suppliers, and customer representatives to ensure compliance with quality standards and regulatory requirements. In this role, you will champion our Business Management System (BMS) and Advanced Quality System (AQS), driving continuous improvement initiatives and fostering a culture of quality throughout the organization. Location: Chittenango, NY (On-site) Employment Type: Full-Time Salary: $80,000 - $100,000, but will be evaluated depending on candidates’ knowledge, skills, and abilities. Key Responsibilities: • Serve as the primary quality assurance contact for assigned customers, ensuring proactive communication and resolution of quality-related issues., • Lead and coordinate technical quality efforts across engineering, manufacturing, and purchasing teams to meet and exceed customer expectations., • Conduct and support customer product, system, and qualification audits, ensuring accurate and timely documentation., • Assist in the review and disposition of customer contracts, specifications, purchase orders, and technical documentation., • Develop, implement, and monitor Corrective and Preventative Action (CAPA) plans to address nonconformances and prevent recurrence., • Actively participate in risk assessments, process improvement initiatives, and root cause analysis activities., • Promote and support continuous improvement through lean methodologies, quality training, and cross-functional collaboration., • Maintain up-to-date knowledge of industry standards and technological advancements in quality systems and analytical tools., • Support internal and external audit activities, including AS9100, NADCAP, ISO17025, and A2LA audits., • Contribute to internal quality metrics and reporting to track progress against goals., • Support the development and implementation of operational training structures; ensure all employees complete required training and remain compliant with quality standards and procedures., • Provide input for quote reviews, inspection planning, and development of shop floor instructions., • Bachelor’s degree in Engineering, Quality, or a related technical discipline, OR an equivalent combination of education and experience., • Minimum 2 years of experience in a quality engineering or quality systems role within a manufacturing environment., • In-depth knowledge of quality standards and frameworks, including AS9100, NADCAP, ISO17025, and A2LA., • Proficiency in quality tools and methodologies such as root cause analysis, FMEA, 5 Whys, Pareto analysis, and control plans., • Strong analytical and problem-solving skills, with the ability to interpret complex technical documents and specifications., • Excellent communication skills, with the ability to collaborate effectively across departments and with external stakeholders., • Demonstrated ability to manage multiple priorities in a fast-paced, deadline-driven environment., • Proficiency in Microsoft Office Suite and familiarity with ERP and quality management systems., • 3–5 years of experience in the aerospace, investment casting, or metal manufacturing industry., • Working knowledge of Six Sigma, Lean Manufacturing, or Theory of Constraints (TOC) principles., • Experience with contract review, inspection planning, and regulatory compliance in a customer-facing role., • ASQ certification (CQE, CQA, or similar) is a strong plus., • Key Relationships, • Collaborate with the Quality Manager, Lab Manager, Sales Manager, Process Engineers, and Manufacturing Leaders At Superior Metals Manufacturing, we take pride in more than just what we make—we take pride in how we make it. By joining our team, you'll be part of a dynamic and growing company where innovation, craftsmanship, and quality are at the heart of our culture. We foster an environment of collaboration and continuous learning, where every team member’s voice matters and contributions are valued. Whether you're developing cutting-edge aerospace components or streamlining a process on the production floor, you’ll be making an impact every day. We offer: Innovative Environment: Work in a state-of-the-art melt shop. Collaborative Environment: Work alongside dedicated professionals in a supportive, team-oriented setting. Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities. Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, paid vacation, bonuses and more. Ready to shape the future of manufacturing quality? Apply today and bring your precision and passion to a team where your impact matters. About Us: Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a non-management position This is a full time position

Join Our Team as a Quality Engineer at Superior Metals Manufacturing! About the Role: Superior Metals Manufacturing is seeking a highly motivated and detail-oriented Quality Engineer to join our team in Chittenango, NY. This role is integral to our commitment to manufacturing excellence and customer satisfaction. The Quality Engineer will work closely with internal departments, suppliers, and customer representatives to ensure compliance with quality standards and regulatory requirements. In this role, you will champion our Business Management System (BMS) and Advanced Quality System (AQS), driving continuous improvement initiatives and fostering a culture of quality throughout the organization. Location: Chittenango, NY (On-site) Employment Type: Full-Time Salary: $80,000 - $100,000, but will be evaluated depending on candidates’ knowledge, skills, and abilities. Key Responsibilities: • Serve as the primary quality assurance contact for assigned customers, ensuring proactive communication and resolution of quality-related issues., • Lead and coordinate technical quality efforts across engineering, manufacturing, and purchasing teams to meet and exceed customer expectations., • Conduct and support customer product, system, and qualification audits, ensuring accurate and timely documentation., • Assist in the review and disposition of customer contracts, specifications, purchase orders, and technical documentation., • Develop, implement, and monitor Corrective and Preventative Action (CAPA) plans to address nonconformances and prevent recurrence., • Actively participate in risk assessments, process improvement initiatives, and root cause analysis activities., • Promote and support continuous improvement through lean methodologies, quality training, and cross-functional collaboration., • Maintain up-to-date knowledge of industry standards and technological advancements in quality systems and analytical tools., • Support internal and external audit activities, including AS9100, NADCAP, ISO17025, and A2LA audits., • Contribute to internal quality metrics and reporting to track progress against goals., • Support the development and implementation of operational training structures; ensure all employees complete required training and remain compliant with quality standards and procedures., • Provide input for quote reviews, inspection planning, and development of shop floor instructions., • Bachelor’s degree in Engineering, Quality, or a related technical discipline, OR an equivalent combination of education and experience., • Minimum 2 years of experience in a quality engineering or quality systems role within a manufacturing environment., • In-depth knowledge of quality standards and frameworks, including AS9100, NADCAP, ISO17025, and A2LA., • Proficiency in quality tools and methodologies such as root cause analysis, FMEA, 5 Whys, Pareto analysis, and control plans., • Strong analytical and problem-solving skills, with the ability to interpret complex technical documents and specifications., • Excellent communication skills, with the ability to collaborate effectively across departments and with external stakeholders., • Demonstrated ability to manage multiple priorities in a fast-paced, deadline-driven environment., • Proficiency in Microsoft Office Suite and familiarity with ERP and quality management systems., • 3–5 years of experience in the aerospace, investment casting, or metal manufacturing industry., • Working knowledge of Six Sigma, Lean Manufacturing, or Theory of Constraints (TOC) principles., • Experience with contract review, inspection planning, and regulatory compliance in a customer-facing role., • ASQ certification (CQE, CQA, or similar) is a strong plus., • Key Relationships, • Collaborate with the Quality Manager, Lab Manager, Sales Manager, Process Engineers, and Manufacturing Leaders At Superior Metals Manufacturing, we take pride in more than just what we make—we take pride in how we make it. By joining our team, you'll be part of a dynamic and growing company where innovation, craftsmanship, and quality are at the heart of our culture. We foster an environment of collaboration and continuous learning, where every team member’s voice matters and contributions are valued. Whether you're developing cutting-edge aerospace components or streamlining a process on the production floor, you’ll be making an impact every day. We offer: Innovative Environment: Work in a state-of-the-art melt shop. Collaborative Environment: Work alongside dedicated professionals in a supportive, team-oriented setting. Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities. Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, paid vacation, bonuses and more. Ready to shape the future of manufacturing quality? Apply today and bring your precision and passion to a team where your impact matters. About Us: Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a non-management position This is a full time position

Saab, Inc., a global aerospace and defense solutions leader, seeks a creative and results-driven Engineering Operations Analyst for our Surveillance Division. This position will work from our East Syracuse facility and is open to a hybrid work schedule. As an Engineering Operations Analyst, you will support the execution of complex engineering programs by enabling engineering operational (EngOps) efficiency, driving engineering process improvements, developing and utilizing engineering metrics to ensure efficient and predictable engineering performance. You will interface with several parts of the organization including Engineering, Program Management, Quality and Operations. The ideal candidate possesses a multidisciplinary background that combines expertise in engineering, data analysis, and the optimization of engineering processes. The Engineering Operations Analyst is responsible for transforming data into actionable insights to unlock the productivity of the engineering team, analyzing engineering and performance trends. A strong understanding of development processes, program execution and financial dynamics, the Engineering Operations Analyst empowers stakeholders to make informed decisions that enhance operational efficiency and promote growth. Responsibilities include: * Maintain and optimize engineering operations metrics (e.g. velocity, on-time delivery, defect rates). * Support integration of tools such as JIRA, Confluence, PLM systems, or requirements management platforms. * Contribute to process improvement initiatives, focusing on engineering lifecycle efficiency and team scalability. * Assist with compliance to engineering standards, design reviews, and documentation requirements. * Identify opportunities for improving engineering processes through data analysis Compensation Range: $90,000 - $112,500 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. * Bachelor’s degree in Systems Engineering, Engineering Management, Industrial, Engineering, Operations Research/Management or related fields. * 5+ years of experience in similar role Required Skills: * Foundational experience in engineering and development processes. * A solid understanding of data analysis, visualization, and modeling tools. * Analytical, critical thinker with an ability to transform raw data into actionable insights. * Ability to forecast resource needs (personnel, finances, and capital assets) to achieve business goals. * Performance measurement through defined engineering metrics for teams and processes * Exceptional communication and presentation abilities * Eligibility to obtain a Secret level security clearance * Experience working within a matrix organization Desired Skills: * Business Analytics, Informatics, and Data Mining * Hands-on experience with Advanced Excel, PowerBI, or similar business intelligence frameworks * Value stream, value network, or similar process mapping and improvement experience Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job Description Seal & Design, Inc. is a family owned company founded in Clarence, NY with three divisions located across the U.S. and Canada. Our product line includes gaskets, o-rings, seals, molded products, die-cut foams, and many other specific products for all kinds of sealing applications. We provide superior products to our customers across many industries, including: Automotive, Medical, Military, Aerospace, Electronics, Power Generation, Hydraulics, and HVAC. We are looking for a Production Associate to join our team, on first shift! • Monday - Friday- 6:00 AM - 2:30 PM Overview: Fabricate orders according to job specifications with an eye towards process improvement, quality and meeting or exceeding job productivity and efficiency standards. Responsibilities: • Operate machinery safely according to company policies, • Perform secondary inspection and advise supervisor of shortfalls in quality and temporarily suspends sorting until issue is resolved, • Cross train and assist in other departments as required Requirements To be seriously considered for this role, please have the following regarding: Experience: 1 year of manufacturing experience Education: HS Diploma Skills: Proficiency working in a computer supported environment with business software, basic math and language skills, strong attention to detail Characteristics: Results driven, ability to take initiative and challenge the status quo, ability to meet deadlines and work in a team atmosphere to deliver results Benefits • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance

Job Description Seal & Design, Inc. is a family owned company founded in Clarence, NY with three divisions located across the U.S. and Canada. Our product line includes gaskets, o-rings, seals, molded products, die-cut foams, and many other specific products for all kinds of sealing applications. We provide superior products to our customers across many industries, including: Automotive, Medical, Military, Aerospace, Electronics, Power Generation, Hydraulics, and HVAC. We are looking for a Production Associate to join our team, on first shift! • Monday - Friday- 6:00 AM - 2:30 PM Overview: Fabricate orders according to job specifications with an eye towards process improvement, quality and meeting or exceeding job productivity and efficiency standards. Responsibilities: • Operate machinery safely according to company policies, • Perform secondary inspection and advise supervisor of shortfalls in quality and temporarily suspends sorting until issue is resolved, • Cross train and assist in other departments as required Requirements To be seriously considered for this role, please have the following regarding: Experience: 1 year of manufacturing experience Education: HS Diploma Skills: Proficiency working in a computer supported environment with business software, basic math and language skills, strong attention to detail Characteristics: Results driven, ability to take initiative and challenge the status quo, ability to meet deadlines and work in a team atmosphere to deliver results Benefits • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance

Job Description Seal & Design, Inc. is a family owned company founded in Clarence, NY with three divisions located across the U.S. and Canada. Our product line includes gaskets, o-rings, seals, molded products, die-cut foams, and many other specific products for all kinds of sealing applications. We provide superior products to our customers across many industries, including: Automotive, Medical, Military, Aerospace, Electronics, Power Generation, Hydraulics, and HVAC. We are looking for a Production Associate to join our team, on first shift! • Monday - Friday- 6:00 AM - 2:30 PM, • Pay range: $21- 23/hour Overview: Fabricate orders according to job specifications with an eye towards process improvement, quality and meeting or exceeding job productivity and efficiency standards. Responsibilities: • Operate machinery safely according to company policies, • Perform secondary inspection and advise supervisor of shortfalls in quality and temporarily suspends sorting until issue is resolved, • Cross train and assist in other departments as required Requirements To be seriously considered for this role, please have the following regarding: Experience: 1 year of manufacturing experience Education: HS Diploma Skills: Proficiency working in a computer supported environment with business software, basic math and language skills, strong attention to detail Characteristics: Results driven, ability to take initiative and challenge the status quo, ability to meet deadlines and work in a team atmosphere to deliver results Benefits • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance

Make Your Career in Aerospace Manufacturing! Sign-on Bonus Up to $1,000. Are you ready to join a fast-paced, collaborative environment and build a rewarding career in manufacturing? Consolidated Precision Products (CPP) is a sand-casting foundry that specializes in complex aerospace and defense products. We are looking for talented individuals to join our team. We'll provide the training to give you the skills you need to succeed. What matters most is your energy, strong work ethic, attendance, and dedication to quality. This is a great opportunity to join a stable & growth-oriented company that has been in business for over 100 years! What do we have to offer you? • Starting at $25/hour (Or more with direct experience), • Paid training and overtime potential, • Full benefits package which includes Medical/dental/vision/life/disability insurance, • Quarterly bonus program and 401(k) with match, • Robust paid PTO & holiday pay, • Upward mobility and leadership that strives to help you succeed., • Sign-on bonus up to $1,000 to welcome you aboard! What will you do?, • Places film against viewing screen to conduct initial and final reading and interpreting by examining castings for flaws such as blows, cracks, excess sand, wires, gas porosity gas holes, core shifts, segregation, etc., • Ensures all developed film contains the proper number of X-ray shots, types of angles, part numbers and other requirements specified by the Company or customers., • Uses densitometer to ensure film coming out of the developer meets density specifications., • Ensures all film is properly developed by checking appropriate gauges, temperatures, etc., • As required, types up customer reports identifying X-ray reading results and interpretations., • Acquire additional certifications and credentials as required for work or career development, • Work on/participate in special projects as needed or assigned by management Qualifications:, • Education: High school diploma or equivalent required, • Experience: 1-2 years of directly related NDT experience Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires access or use of hardware and technology which is subject to the International Traffic in Arms Regulations (ITAR) and Export Administration (EAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. “green card holder”), Political Asylee (permanent), or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. E.O.E. This is a non-management position This is a full time position

Make Your Career in Aerospace Manufacturing! Sign-on Bonus Up to $1,000. Are you ready to join a fast-paced, collaborative environment and build a rewarding career in manufacturing? Consolidated Precision Products (CPP) is a sand-casting foundry that specializes in complex aerospace and defense products. We are looking for talented individuals to join our team. We'll provide the training to give you the skills you need to succeed. What matters most is your energy, strong work ethic, attendance, and dedication to quality. This is a great opportunity to join a stable & growth-oriented company that has been in business for over 100 years! What do we have to offer you? • Starting at $25/hour (Or more with direct experience), • Paid training and overtime potential, • Full benefits package which includes Medical/dental/vision/life/disability insurance, • Quarterly bonus program and 401(k) with match, • Robust paid PTO & holiday pay, • Upward mobility and leadership that strives to help you succeed., • Sign-on bonus up to $1,000 to welcome you aboard! What will you do?, • Places film against viewing screen to conduct initial and final reading and interpreting by examining castings for flaws such as blows, cracks, excess sand, wires, gas porosity gas holes, core shifts, segregation, etc., • Ensures all developed film contains the proper number of X-ray shots, types of angles, part numbers and other requirements specified by the Company or customers., • Uses densitometer to ensure film coming out of the developer meets density specifications., • Ensures all film is properly developed by checking appropriate gauges, temperatures, etc., • As required, types up customer reports identifying X-ray reading results and interpretations., • Acquire additional certifications and credentials as required for work or career development, • Work on/participate in special projects as needed or assigned by management Qualifications:, • Education: High school diploma or equivalent required, • Experience: 1-2 years of directly related NDT experience Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires access or use of hardware and technology which is subject to the International Traffic in Arms Regulations (ITAR) and Export Administration (EAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. “green card holder”), Political Asylee (permanent), or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. E.O.E. This is a non-management position This is a full time position

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking for a CMM Programmer to join our team! Major Responsibilities: • Ensure production goals and ship schedules are met, • Manage staffing levels and requirements, • Ensure team members remain productive, • Follow Leader Standard Work., • Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs., • Responsible for CMM program development, modification and implementation in close association with Engineering., • Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment., • Understanding of Geometric Dimensioning and Tolerancing (GD&T)., • Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data., • Ability to accurately complete and train others to complete standard and customer specific layout forms and templates, • Responsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validated, • Adhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Compensation Range: $105,000.00 - $130,000.00 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management position This is a full time position

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking for a CMM Programmer to join our team! Major Responsibilities: • Ensure production goals and ship schedules are met, • Manage staffing levels and requirements, • Ensure team members remain productive, • Follow Leader Standard Work., • Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs., • Responsible for CMM program development, modification and implementation in close association with Engineering., • Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment., • Understanding of Geometric Dimensioning and Tolerancing (GD&T)., • Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data., • Ability to accurately complete and train others to complete standard and customer specific layout forms and templates, • Responsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validated, • Adhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Compensation Range: $105,000.00 - $130,000.00 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management position This is a full time position

⚡Join Our Growing Team as an Industrial Electrician at Superior Metals Manufacturing!⚡ Job Summary: Are you looking for your next challenge? Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system development—all while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Essential Job Functions: • Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly., • Work hands-on with 480V 3-phase electrical power distribution systems—let’s keep the lights on!, • Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise., • Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient., • Handle high voltage systems and equipment like a pro., • Get acquainted with hydraulic and pneumatic systems—your toolbox just got a little bigger!, • Utilize PLC controls and Ladder Logic Programming to enhance our automation processes., • Read and interpret electrical and hydraulic schematics and plant drawings like a map to success., • Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools., • Perform preventative maintenance tasks to keep our production equipment in top shape., • Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment., • Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters., • Inspect electrical systems for hazards and compliance—safety first!, • Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches., • Education: High school diploma or GED., • Experience: 5+ years in industrial maintenance/electrical experience., • Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus., • Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred., • Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors., • Mathematical Skills: Proficient in basic math operations—adding, subtracting, and working with fractions and decimals., • Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions., • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25 - $45 per hour, with potential to make more based on your experience, education and shift. We also have available overtime., • New Facility: Work in our brand-new, cutting-edge manufacturing environment. SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management position This is a full time position

⚡Join Our Growing Team as an Industrial Electrician at Superior Metals Manufacturing!⚡ Job Summary: Are you looking for your next challenge? Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system development—all while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Essential Job Functions: • Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly., • Work hands-on with 480V 3-phase electrical power distribution systems—let’s keep the lights on!, • Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise., • Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient., • Handle high voltage systems and equipment like a pro., • Get acquainted with hydraulic and pneumatic systems—your toolbox just got a little bigger!, • Utilize PLC controls and Ladder Logic Programming to enhance our automation processes., • Read and interpret electrical and hydraulic schematics and plant drawings like a map to success., • Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools., • Perform preventative maintenance tasks to keep our production equipment in top shape., • Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment., • Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters., • Inspect electrical systems for hazards and compliance—safety first!, • Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches., • Education: High school diploma or GED., • Experience: 5+ years in industrial maintenance/electrical experience., • Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus., • Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred., • Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors., • Mathematical Skills: Proficient in basic math operations—adding, subtracting, and working with fractions and decimals., • Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions., • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25 - $45 per hour, with potential to make more based on your experience, education and shift. We also have available overtime., • New Facility: Work in our brand-new, cutting-edge manufacturing environment. SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management position This is a full time position

⚡Join Our Growing Team as an Industrial Electrician at Superior Metals Manufacturing!⚡ Job Summary: Are you looking for your next challenge? Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system development—all while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Essential Job Functions: • Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly., • Work hands-on with 480V 3-phase electrical power distribution systems—let’s keep the lights on!, • Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise., • Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient., • Handle high voltage systems and equipment like a pro., • Get acquainted with hydraulic and pneumatic systems—your toolbox just got a little bigger!, • Utilize PLC controls and Ladder Logic Programming to enhance our automation processes., • Read and interpret electrical and hydraulic schematics and plant drawings like a map to success., • Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools., • Perform preventative maintenance tasks to keep our production equipment in top shape., • Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment., • Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters., • Inspect electrical systems for hazards and compliance—safety first!, • Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches., • Education: High school diploma or GED., • Experience: 5+ years in industrial maintenance/electrical experience., • Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus., • Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred., • Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors., • Mathematical Skills: Proficient in basic math operations—adding, subtracting, and working with fractions and decimals., • Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions., • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25 - $45 per hour, with potential to make more based on your experience, education and shift. We also have available overtime., • New Facility: Work in our brand-new, cutting-edge manufacturing environment. SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management position This is a full time position

Make Your Career in Aerospace Manufacturing! Sign-on Bonus Up to $1,000. Are you ready to join a fast-paced, collaborative environment and build a rewarding career in manufacturing? Consolidated Precision Products (CPP) is a sand-casting foundry that specializes in complex aerospace and defense products. We are looking for talented individuals to join our team. We'll provide the training to give you the skills you need to succeed. What matters most is your energy, strong work ethic, attendance, and dedication to quality. This is a great opportunity to join a stable & growth-oriented company that has been in business for over 100 years! What do we have to offer you? • Starting at $25/hour (Or more with direct experience), • Paid training and overtime potential, • Full benefits package which includes Medical/dental/vision/life/disability insurance, • Quarterly bonus program and 401(k) with match, • Robust paid PTO & holiday pay, • Upward mobility and leadership that strives to help you succeed., • Sign-on bonus up to $1,000 to welcome you aboard! What will you do?, • Places film against viewing screen to conduct initial and final reading and interpreting by examining castings for flaws such as blows, cracks, excess sand, wires, gas porosity gas holes, core shifts, segregation, etc., • Ensures all developed film contains the proper number of X-ray shots, types of angles, part numbers and other requirements specified by the Company or customers., • Uses densitometer to ensure film coming out of the developer meets density specifications., • Ensures all film is properly developed by checking appropriate gauges, temperatures, etc., • As required, types up customer reports identifying X-ray reading results and interpretations., • Acquire additional certifications and credentials as required for work or career development, • Work on/participate in special projects as needed or assigned by management Qualifications:, • Education: High school diploma or equivalent required, • Experience: 1-2 years of directly related NDT experience Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires access or use of hardware and technology which is subject to the International Traffic in Arms Regulations (ITAR) and Export Administration (EAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. “green card holder”), Political Asylee (permanent), or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. E.O.E. This is a non-management position This is a full time position

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES • Demonstrated ability to understand and work with advanced “shop” mathematical concepts., • High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming., • Excellent analytical and problem solving and resolution capability., • Enthusiasm, drive, and work ethic in an ‘on-time’ environment., • Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues., • Demonstrates a solid understanding of 3D modeling software., • Has the ability to create training materials and train shop floor employees., • Possesses creative thinking skills and is a detail-oriented personality., • Is able to communicate well to other members of the development team., • Eliminate waste and elevates productivity using Lean Manufacturing program., • Participate in the startup of new equipment., • Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers., • Adhere to AS9100 and ISO procedures and compliance, • Ensures all equipment controls are accurately defined and maintained., • Contributes to team effort by accomplishing related results as needed., • Responsible for adherence to all safety policies, practices and procedures., • Ability to work flexible hours and demonstrate reliability., • Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred., • Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines., • Knowledge of 3D modeling software and Gcode a must., • Familiar with Motion Control and Vision., • Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues., • Experience and skill in troubleshooting control systems., • Knowledge of GD&T practices, • Experienced in interpretation of technical drawings CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management position This is a full time position

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES • Demonstrated ability to understand and work with advanced “shop” mathematical concepts., • High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming., • Excellent analytical and problem solving and resolution capability., • Enthusiasm, drive, and work ethic in an ‘on-time’ environment., • Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues., • Demonstrates a solid understanding of 3D modeling software., • Has the ability to create training materials and train shop floor employees., • Possesses creative thinking skills and is a detail-oriented personality., • Is able to communicate well to other members of the development team., • Eliminate waste and elevates productivity using Lean Manufacturing program., • Participate in the startup of new equipment., • Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers., • Adhere to AS9100 and ISO procedures and compliance, • Ensures all equipment controls are accurately defined and maintained., • Contributes to team effort by accomplishing related results as needed., • Responsible for adherence to all safety policies, practices and procedures., • Ability to work flexible hours and demonstrate reliability., • Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred., • Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines., • Knowledge of 3D modeling software and Gcode a must., • Familiar with Motion Control and Vision., • Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues., • Experience and skill in troubleshooting control systems., • Knowledge of GD&T practices, • Experienced in interpretation of technical drawings CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management position This is a full time position

Maintenance Mechanic - Multiple shifts available If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We are an investment casting foundry for the aerospace and defense industry creating parts for jet engines, wind and gas turbines, and other critical aerospace components. Performs all required duties relating to installing and troubleshooting plant production equipment. Why You'll Love Working With Us: • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: Range $25.00 $35.00 per hour, with potential to make more based on your role, shift, and experience. Shift differentials for 2nd shift, 3rd shift and weekend shift. We also have available overtime., • Shifts: We currently have 8 hr., 10 hr. and 12 hr. shifts available for 1st shift, 2nd shift, 3rd shift, and weekend shift., • Sign-On Bonus: Receive a $1000 sign-on bonus when you join our team! CANDIDATES OFFERED EMPLOYMENT ARE REQUIRED TO PASS A PRE-EMPLOYMENT DRUG TEST & BACKGROUND STUDY PRIOR TO EMPLOYMENT What you'll be doing: • Responsible for ordering and maintaining supplies to support all maintenance functions., • Responsible for basic maintenance support for startup operations such as, lights, dust collectors, air filtration systems, etc., • Monitor machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine., • Dismantles defective machines and equipment and installs new or repaired parts., • Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replace Design, assemble and install electronic control systems for production machinery and associated automated equipment’s gauges, valves, pressure regulators, and related equipment., • Troubleshoot, maintain and repair machine level control systems, which utilize programmable logic controllers., • Repairs and maintains physical structure of establishment., • Responsible for adherence to all safety policies, practices and procedures. Requirements:, • Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or related experience and/or training; or equivalent combination of education and experience., • Experienced Forklift drivers preferred., • Language skills: Ability to read, understand, and comprehend documents. Ability to speak effectively and interact with other team members, engineers, and leadership., • Mathematical Skills: Ability to add, subtract, multiply, and divide. Ability to use basic gages and measuring devices., • Reasoning Ability: Ability to deal with problems involving several concrete variables in standardized situations. Ability to carry out instructions in written, oral, and diagram form., • Frequently work near moving mechanical parts., • The physical effort applied in this job includes lifting, pulling, reaching, manipulating, carrying, pushing, or shoveling., • Manufacturing requires repetitive motion of hands, wrists, and arms. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. This is a non-management position This is a full time position

Maintenance Mechanic - Multiple shifts available If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We are an investment casting foundry for the aerospace and defense industry creating parts for jet engines, wind and gas turbines, and other critical aerospace components. Performs all required duties relating to installing and troubleshooting plant production equipment. Why You'll Love Working With Us: • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: Range $25.00 $35.00 per hour, with potential to make more based on your role, shift, and experience. Shift differentials for 2nd shift, 3rd shift and weekend shift. We also have available overtime., • Shifts: We currently have 8 hr., 10 hr. and 12 hr. shifts available for 1st shift, 2nd shift, 3rd shift, and weekend shift., • Sign-On Bonus: Receive a $1000 sign-on bonus when you join our team! CANDIDATES OFFERED EMPLOYMENT ARE REQUIRED TO PASS A PRE-EMPLOYMENT DRUG TEST & BACKGROUND STUDY PRIOR TO EMPLOYMENT What you'll be doing: • Responsible for ordering and maintaining supplies to support all maintenance functions., • Responsible for basic maintenance support for startup operations such as, lights, dust collectors, air filtration systems, etc., • Monitor machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine., • Dismantles defective machines and equipment and installs new or repaired parts., • Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replace Design, assemble and install electronic control systems for production machinery and associated automated equipment’s gauges, valves, pressure regulators, and related equipment., • Troubleshoot, maintain and repair machine level control systems, which utilize programmable logic controllers., • Repairs and maintains physical structure of establishment., • Responsible for adherence to all safety policies, practices and procedures. Requirements:, • Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or related experience and/or training; or equivalent combination of education and experience., • Experienced Forklift drivers preferred., • Language skills: Ability to read, understand, and comprehend documents. Ability to speak effectively and interact with other team members, engineers, and leadership., • Mathematical Skills: Ability to add, subtract, multiply, and divide. Ability to use basic gages and measuring devices., • Reasoning Ability: Ability to deal with problems involving several concrete variables in standardized situations. Ability to carry out instructions in written, oral, and diagram form., • Frequently work near moving mechanical parts., • The physical effort applied in this job includes lifting, pulling, reaching, manipulating, carrying, pushing, or shoveling., • Manufacturing requires repetitive motion of hands, wrists, and arms. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. This is a non-management position This is a full time position

Maintenance Mechanic - Multiple shifts available If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We are an investment casting foundry for the aerospace and defense industry creating parts for jet engines, wind and gas turbines, and other critical aerospace components. Performs all required duties relating to installing and troubleshooting plant production equipment. Why You'll Love Working With Us: • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: Range $25.00 $35.00 per hour, with potential to make more based on your role, shift, and experience. Shift differentials for 2nd shift, 3rd shift and weekend shift. We also have available overtime., • Shifts: We currently have 8 hr., 10 hr. and 12 hr. shifts available for 1st shift, 2nd shift, 3rd shift, and weekend shift., • Sign-On Bonus: Receive a $1000 sign-on bonus when you join our team! CANDIDATES OFFERED EMPLOYMENT ARE REQUIRED TO PASS A PRE-EMPLOYMENT DRUG TEST & BACKGROUND STUDY PRIOR TO EMPLOYMENT What you'll be doing: • Responsible for ordering and maintaining supplies to support all maintenance functions., • Responsible for basic maintenance support for startup operations such as, lights, dust collectors, air filtration systems, etc., • Monitor machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine., • Dismantles defective machines and equipment and installs new or repaired parts., • Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replace Design, assemble and install electronic control systems for production machinery and associated automated equipment’s gauges, valves, pressure regulators, and related equipment., • Troubleshoot, maintain and repair machine level control systems, which utilize programmable logic controllers., • Repairs and maintains physical structure of establishment., • Responsible for adherence to all safety policies, practices and procedures. Requirements:, • Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or related experience and/or training; or equivalent combination of education and experience., • Experienced Forklift drivers preferred., • Language skills: Ability to read, understand, and comprehend documents. Ability to speak effectively and interact with other team members, engineers, and leadership., • Mathematical Skills: Ability to add, subtract, multiply, and divide. Ability to use basic gages and measuring devices., • Reasoning Ability: Ability to deal with problems involving several concrete variables in standardized situations. Ability to carry out instructions in written, oral, and diagram form., • Frequently work near moving mechanical parts., • The physical effort applied in this job includes lifting, pulling, reaching, manipulating, carrying, pushing, or shoveling., • Manufacturing requires repetitive motion of hands, wrists, and arms. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. This is a non-management position This is a full time position

Make Your Career in Aerospace Manufacturing! Sign-on Bonus Up to $1,000. Are you ready to join a fast-paced, collaborative environment and build a rewarding career in manufacturing? Consolidated Precision Products (CPP) is a sand-casting foundry that specializes in complex aerospace and defense products. We are looking for talented individuals to join our team. We'll provide the training to give you the skills you need to succeed. What matters most is your energy, strong work ethic, attendance, and dedication to quality. This is a great opportunity to join a stable & growth-oriented company that has been in business for over 100 years! What do we have to offer you? • Starting at $25/hour (Or more with direct experience), • Paid training and overtime potential, • Full benefits package which includes Medical/dental/vision/life/disability insurance, • Quarterly bonus program and 401(k) with match, • Robust paid PTO & holiday pay, • Upward mobility and leadership that strives to help you succeed., • Sign-on bonus up to $1,000 to welcome you aboard! What will you do?, • Places film against viewing screen to conduct initial and final reading and interpreting by examining castings for flaws such as blows, cracks, excess sand, wires, gas porosity gas holes, core shifts, segregation, etc., • Ensures all developed film contains the proper number of X-ray shots, types of angles, part numbers and other requirements specified by the Company or customers., • Uses densitometer to ensure film coming out of the developer meets density specifications., • Ensures all film is properly developed by checking appropriate gauges, temperatures, etc., • As required, types up customer reports identifying X-ray reading results and interpretations., • Acquire additional certifications and credentials as required for work or career development, • Work on/participate in special projects as needed or assigned by management Qualifications:, • Education: High school diploma or equivalent required, • Experience: 1-2 years of directly related NDT experience Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires access or use of hardware and technology which is subject to the International Traffic in Arms Regulations (ITAR) and Export Administration (EAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. “green card holder”), Political Asylee (permanent), or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. E.O.E. This is a non-management position This is a full time position

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking for a CMM Programmer to join our team! Major Responsibilities: • Ensure production goals and ship schedules are met, • Manage staffing levels and requirements, • Ensure team members remain productive, • Follow Leader Standard Work., • Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs., • Responsible for CMM program development, modification and implementation in close association with Engineering., • Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment., • Understanding of Geometric Dimensioning and Tolerancing (GD&T)., • Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data., • Ability to accurately complete and train others to complete standard and customer specific layout forms and templates, • Responsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validated, • Adhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Compensation Range: $105,000.00 - $130,000.00 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management position This is a full time position

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking for a CMM Programmer to join our team! Major Responsibilities: • Ensure production goals and ship schedules are met, • Manage staffing levels and requirements, • Ensure team members remain productive, • Follow Leader Standard Work., • Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs., • Responsible for CMM program development, modification and implementation in close association with Engineering., • Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment., • Understanding of Geometric Dimensioning and Tolerancing (GD&T)., • Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data., • Ability to accurately complete and train others to complete standard and customer specific layout forms and templates, • Responsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validated, • Adhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Compensation Range: $105,000.00 - $130,000.00 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management position This is a full time position

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking for a CMM Programmer to join our team! Major Responsibilities: • Ensure production goals and ship schedules are met, • Manage staffing levels and requirements, • Ensure team members remain productive, • Follow Leader Standard Work., • Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs., • Responsible for CMM program development, modification and implementation in close association with Engineering., • Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment., • Understanding of Geometric Dimensioning and Tolerancing (GD&T)., • Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data., • Ability to accurately complete and train others to complete standard and customer specific layout forms and templates, • Responsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validated, • Adhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Compensation Range: $105,000.00 - $130,000.00 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management position This is a full time position

⚡Join Our Growing Team as an Industrial Electrician at Superior Metals Manufacturing!⚡ Job Summary: Are you looking for your next challenge? Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system development—all while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Essential Job Functions: • Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly., • Work hands-on with 480V 3-phase electrical power distribution systems—let’s keep the lights on!, • Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise., • Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient., • Handle high voltage systems and equipment like a pro., • Get acquainted with hydraulic and pneumatic systems—your toolbox just got a little bigger!, • Utilize PLC controls and Ladder Logic Programming to enhance our automation processes., • Read and interpret electrical and hydraulic schematics and plant drawings like a map to success., • Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools., • Perform preventative maintenance tasks to keep our production equipment in top shape., • Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment., • Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters., • Inspect electrical systems for hazards and compliance—safety first!, • Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches., • Education: High school diploma or GED., • Experience: 5+ years in industrial maintenance/electrical experience., • Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus., • Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred., • Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors., • Mathematical Skills: Proficient in basic math operations—adding, subtracting, and working with fractions and decimals., • Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions., • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25 - $45 per hour, with potential to make more based on your experience, education and shift. We also have available overtime., • New Facility: Work in our brand-new, cutting-edge manufacturing environment. SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management position This is a full time position

⚡Join Our Growing Team as an Industrial Electrician at Superior Metals Manufacturing!⚡ Job Summary: Are you looking for your next challenge? Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system development—all while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Essential Job Functions: • Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly., • Work hands-on with 480V 3-phase electrical power distribution systems—let’s keep the lights on!, • Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise., • Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient., • Handle high voltage systems and equipment like a pro., • Get acquainted with hydraulic and pneumatic systems—your toolbox just got a little bigger!, • Utilize PLC controls and Ladder Logic Programming to enhance our automation processes., • Read and interpret electrical and hydraulic schematics and plant drawings like a map to success., • Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools., • Perform preventative maintenance tasks to keep our production equipment in top shape., • Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment., • Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters., • Inspect electrical systems for hazards and compliance—safety first!, • Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches., • Education: High school diploma or GED., • Experience: 5+ years in industrial maintenance/electrical experience., • Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus., • Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred., • Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors., • Mathematical Skills: Proficient in basic math operations—adding, subtracting, and working with fractions and decimals., • Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions., • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25 - $45 per hour, with potential to make more based on your experience, education and shift. We also have available overtime., • New Facility: Work in our brand-new, cutting-edge manufacturing environment. SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management position This is a full time position

Make Your Career in Aerospace Manufacturing! Sign-on Bonus Up to $1,000. Are you ready to join a fast-paced, collaborative environment and build a rewarding career in manufacturing? Consolidated Precision Products (CPP) is a sand-casting foundry that specializes in complex aerospace and defense products. We are looking for talented individuals to join our team. We'll provide the training to give you the skills you need to succeed. What matters most is your energy, strong work ethic, attendance, and dedication to quality. This is a great opportunity to join a stable & growth-oriented company that has been in business for over 100 years! What do we have to offer you? • Starting at $25/hour (Or more with direct experience), • Paid training and overtime potential, • Full benefits package which includes Medical/dental/vision/life/disability insurance, • Quarterly bonus program and 401(k) with match, • Robust paid PTO & holiday pay, • Upward mobility and leadership that strives to help you succeed., • Sign-on bonus up to $1,000 to welcome you aboard! What will you do?, • Places film against viewing screen to conduct initial and final reading and interpreting by examining castings for flaws such as blows, cracks, excess sand, wires, gas porosity gas holes, core shifts, segregation, etc., • Ensures all developed film contains the proper number of X-ray shots, types of angles, part numbers and other requirements specified by the Company or customers., • Uses densitometer to ensure film coming out of the developer meets density specifications., • Ensures all film is properly developed by checking appropriate gauges, temperatures, etc., • As required, types up customer reports identifying X-ray reading results and interpretations., • Acquire additional certifications and credentials as required for work or career development, • Work on/participate in special projects as needed or assigned by management Qualifications:, • Education: High school diploma or equivalent required, • Experience: 1-2 years of directly related NDT experience Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires access or use of hardware and technology which is subject to the International Traffic in Arms Regulations (ITAR) and Export Administration (EAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. “green card holder”), Political Asylee (permanent), or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. E.O.E. This is a non-management position This is a full time position

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES • Demonstrated ability to understand and work with advanced “shop” mathematical concepts., • High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming., • Excellent analytical and problem solving and resolution capability., • Enthusiasm, drive, and work ethic in an ‘on-time’ environment., • Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues., • Demonstrates a solid understanding of 3D modeling software., • Has the ability to create training materials and train shop floor employees., • Possesses creative thinking skills and is a detail-oriented personality., • Is able to communicate well to other members of the development team., • Eliminate waste and elevates productivity using Lean Manufacturing program., • Participate in the startup of new equipment., • Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers., • Adhere to AS9100 and ISO procedures and compliance, • Ensures all equipment controls are accurately defined and maintained., • Contributes to team effort by accomplishing related results as needed., • Responsible for adherence to all safety policies, practices and procedures., • Ability to work flexible hours and demonstrate reliability., • Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred., • Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines., • Knowledge of 3D modeling software and Gcode a must., • Familiar with Motion Control and Vision., • Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues., • Experience and skill in troubleshooting control systems., • Knowledge of GD&T practices, • Experienced in interpretation of technical drawings CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management position This is a full time position

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES • Demonstrated ability to understand and work with advanced “shop” mathematical concepts., • High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming., • Excellent analytical and problem solving and resolution capability., • Enthusiasm, drive, and work ethic in an ‘on-time’ environment., • Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues., • Demonstrates a solid understanding of 3D modeling software., • Has the ability to create training materials and train shop floor employees., • Possesses creative thinking skills and is a detail-oriented personality., • Is able to communicate well to other members of the development team., • Eliminate waste and elevates productivity using Lean Manufacturing program., • Participate in the startup of new equipment., • Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers., • Adhere to AS9100 and ISO procedures and compliance, • Ensures all equipment controls are accurately defined and maintained., • Contributes to team effort by accomplishing related results as needed., • Responsible for adherence to all safety policies, practices and procedures., • Ability to work flexible hours and demonstrate reliability., • Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred., • Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines., • Knowledge of 3D modeling software and Gcode a must., • Familiar with Motion Control and Vision., • Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues., • Experience and skill in troubleshooting control systems., • Knowledge of GD&T practices, • Experienced in interpretation of technical drawings CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management position This is a full time position

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES • Demonstrated ability to understand and work with advanced “shop” mathematical concepts., • High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming., • Excellent analytical and problem solving and resolution capability., • Enthusiasm, drive, and work ethic in an ‘on-time’ environment., • Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues., • Demonstrates a solid understanding of 3D modeling software., • Has the ability to create training materials and train shop floor employees., • Possesses creative thinking skills and is a detail-oriented personality., • Is able to communicate well to other members of the development team., • Eliminate waste and elevates productivity using Lean Manufacturing program., • Participate in the startup of new equipment., • Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers., • Adhere to AS9100 and ISO procedures and compliance, • Ensures all equipment controls are accurately defined and maintained., • Contributes to team effort by accomplishing related results as needed., • Responsible for adherence to all safety policies, practices and procedures., • Ability to work flexible hours and demonstrate reliability., • Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred., • Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines., • Knowledge of 3D modeling software and Gcode a must., • Familiar with Motion Control and Vision., • Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues., • Experience and skill in troubleshooting control systems., • Knowledge of GD&T practices, • Experienced in interpretation of technical drawings CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management position This is a full time position

Maintenance Mechanic - Multiple shifts available If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We are an investment casting foundry for the aerospace and defense industry creating parts for jet engines, wind and gas turbines, and other critical aerospace components. Performs all required duties relating to installing and troubleshooting plant production equipment. Why You'll Love Working With Us: • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: Range $25.00 $35.00 per hour, with potential to make more based on your role, shift, and experience. Shift differentials for 2nd shift, 3rd shift and weekend shift. We also have available overtime., • Shifts: We currently have 8 hr., 10 hr. and 12 hr. shifts available for 1st shift, 2nd shift, 3rd shift, and weekend shift., • Sign-On Bonus: Receive a $1000 sign-on bonus when you join our team! CANDIDATES OFFERED EMPLOYMENT ARE REQUIRED TO PASS A PRE-EMPLOYMENT DRUG TEST & BACKGROUND STUDY PRIOR TO EMPLOYMENT What you'll be doing: • Responsible for ordering and maintaining supplies to support all maintenance functions., • Responsible for basic maintenance support for startup operations such as, lights, dust collectors, air filtration systems, etc., • Monitor machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine., • Dismantles defective machines and equipment and installs new or repaired parts., • Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replace Design, assemble and install electronic control systems for production machinery and associated automated equipment’s gauges, valves, pressure regulators, and related equipment., • Troubleshoot, maintain and repair machine level control systems, which utilize programmable logic controllers., • Repairs and maintains physical structure of establishment., • Responsible for adherence to all safety policies, practices and procedures. Requirements:, • Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or related experience and/or training; or equivalent combination of education and experience., • Experienced Forklift drivers preferred., • Language skills: Ability to read, understand, and comprehend documents. Ability to speak effectively and interact with other team members, engineers, and leadership., • Mathematical Skills: Ability to add, subtract, multiply, and divide. Ability to use basic gages and measuring devices., • Reasoning Ability: Ability to deal with problems involving several concrete variables in standardized situations. Ability to carry out instructions in written, oral, and diagram form., • Frequently work near moving mechanical parts., • The physical effort applied in this job includes lifting, pulling, reaching, manipulating, carrying, pushing, or shoveling., • Manufacturing requires repetitive motion of hands, wrists, and arms. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. This is a non-management position This is a full time position

Maintenance Mechanic - Multiple shifts available If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We are an investment casting foundry for the aerospace and defense industry creating parts for jet engines, wind and gas turbines, and other critical aerospace components. Performs all required duties relating to installing and troubleshooting plant production equipment. Why You'll Love Working With Us: • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: Range $25.00 $35.00 per hour, with potential to make more based on your role, shift, and experience. Shift differentials for 2nd shift, 3rd shift and weekend shift. We also have available overtime., • Shifts: We currently have 8 hr., 10 hr. and 12 hr. shifts available for 1st shift, 2nd shift, 3rd shift, and weekend shift., • Sign-On Bonus: Receive a $1000 sign-on bonus when you join our team! CANDIDATES OFFERED EMPLOYMENT ARE REQUIRED TO PASS A PRE-EMPLOYMENT DRUG TEST & BACKGROUND STUDY PRIOR TO EMPLOYMENT What you'll be doing: • Responsible for ordering and maintaining supplies to support all maintenance functions., • Responsible for basic maintenance support for startup operations such as, lights, dust collectors, air filtration systems, etc., • Monitor machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine., • Dismantles defective machines and equipment and installs new or repaired parts., • Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replace Design, assemble and install electronic control systems for production machinery and associated automated equipment’s gauges, valves, pressure regulators, and related equipment., • Troubleshoot, maintain and repair machine level control systems, which utilize programmable logic controllers., • Repairs and maintains physical structure of establishment., • Responsible for adherence to all safety policies, practices and procedures. Requirements:, • Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or related experience and/or training; or equivalent combination of education and experience., • Experienced Forklift drivers preferred., • Language skills: Ability to read, understand, and comprehend documents. Ability to speak effectively and interact with other team members, engineers, and leadership., • Mathematical Skills: Ability to add, subtract, multiply, and divide. Ability to use basic gages and measuring devices., • Reasoning Ability: Ability to deal with problems involving several concrete variables in standardized situations. Ability to carry out instructions in written, oral, and diagram form., • Frequently work near moving mechanical parts., • The physical effort applied in this job includes lifting, pulling, reaching, manipulating, carrying, pushing, or shoveling., • Manufacturing requires repetitive motion of hands, wrists, and arms. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. This is a non-management position This is a full time position

Maintenance Mechanic - Multiple shifts available If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We are an investment casting foundry for the aerospace and defense industry creating parts for jet engines, wind and gas turbines, and other critical aerospace components. Performs all required duties relating to installing and troubleshooting plant production equipment. Why You'll Love Working With Us: • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: Range $25.00 $35.00 per hour, with potential to make more based on your role, shift, and experience. Shift differentials for 2nd shift, 3rd shift and weekend shift. We also have available overtime., • Shifts: We currently have 8 hr., 10 hr. and 12 hr. shifts available for 1st shift, 2nd shift, 3rd shift, and weekend shift., • Sign-On Bonus: Receive a $1000 sign-on bonus when you join our team! CANDIDATES OFFERED EMPLOYMENT ARE REQUIRED TO PASS A PRE-EMPLOYMENT DRUG TEST & BACKGROUND STUDY PRIOR TO EMPLOYMENT What you'll be doing: • Responsible for ordering and maintaining supplies to support all maintenance functions., • Responsible for basic maintenance support for startup operations such as, lights, dust collectors, air filtration systems, etc., • Monitor machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine., • Dismantles defective machines and equipment and installs new or repaired parts., • Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replace Design, assemble and install electronic control systems for production machinery and associated automated equipment’s gauges, valves, pressure regulators, and related equipment., • Troubleshoot, maintain and repair machine level control systems, which utilize programmable logic controllers., • Repairs and maintains physical structure of establishment., • Responsible for adherence to all safety policies, practices and procedures. Requirements:, • Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or related experience and/or training; or equivalent combination of education and experience., • Experienced Forklift drivers preferred., • Language skills: Ability to read, understand, and comprehend documents. Ability to speak effectively and interact with other team members, engineers, and leadership., • Mathematical Skills: Ability to add, subtract, multiply, and divide. Ability to use basic gages and measuring devices., • Reasoning Ability: Ability to deal with problems involving several concrete variables in standardized situations. Ability to carry out instructions in written, oral, and diagram form., • Frequently work near moving mechanical parts., • The physical effort applied in this job includes lifting, pulling, reaching, manipulating, carrying, pushing, or shoveling., • Manufacturing requires repetitive motion of hands, wrists, and arms. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. This is a non-management position This is a full time position

Make Your Career in Aerospace Manufacturing! Sign-on Bonus Up to $1,000. Are you ready to join a fast-paced, collaborative environment and build a rewarding career in manufacturing? Consolidated Precision Products (CPP) is a sand-casting foundry that specializes in complex aerospace and defense products. We are looking for talented individuals to join our team. We'll provide the training to give you the skills you need to succeed. What matters most is your energy, strong work ethic, attendance, and dedication to quality. This is a great opportunity to join a stable & growth-oriented company that has been in business for over 100 years! What do we have to offer you? • Starting at $25/hour (Or more with direct experience), • Paid training and overtime potential, • Full benefits package which includes Medical/dental/vision/life/disability insurance, • Quarterly bonus program and 401(k) with match, • Robust paid PTO & holiday pay, • Upward mobility and leadership that strives to help you succeed., • Sign-on bonus up to $1,000 to welcome you aboard! What will you do?, • Places film against viewing screen to conduct initial and final reading and interpreting by examining castings for flaws such as blows, cracks, excess sand, wires, gas porosity gas holes, core shifts, segregation, etc., • Ensures all developed film contains the proper number of X-ray shots, types of angles, part numbers and other requirements specified by the Company or customers., • Uses densitometer to ensure film coming out of the developer meets density specifications., • Ensures all film is properly developed by checking appropriate gauges, temperatures, etc., • As required, types up customer reports identifying X-ray reading results and interpretations., • Acquire additional certifications and credentials as required for work or career development, • Work on/participate in special projects as needed or assigned by management Qualifications:, • Education: High school diploma or equivalent required, • Experience: 1-2 years of directly related NDT experience Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires access or use of hardware and technology which is subject to the International Traffic in Arms Regulations (ITAR) and Export Administration (EAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. “green card holder”), Political Asylee (permanent), or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. E.O.E. This is a non-management position This is a full time position

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking for a CMM Programmer to join our team! Major Responsibilities: • Ensure production goals and ship schedules are met, • Manage staffing levels and requirements, • Ensure team members remain productive, • Follow Leader Standard Work., • Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs., • Responsible for CMM program development, modification and implementation in close association with Engineering., • Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment., • Understanding of Geometric Dimensioning and Tolerancing (GD&T)., • Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data., • Ability to accurately complete and train others to complete standard and customer specific layout forms and templates, • Responsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validated, • Adhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Compensation Range: $105,000.00 - $130,000.00 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management position This is a full time position

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking for a CMM Programmer to join our team! Major Responsibilities: • Ensure production goals and ship schedules are met, • Manage staffing levels and requirements, • Ensure team members remain productive, • Follow Leader Standard Work., • Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs., • Responsible for CMM program development, modification and implementation in close association with Engineering., • Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment., • Understanding of Geometric Dimensioning and Tolerancing (GD&T)., • Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data., • Ability to accurately complete and train others to complete standard and customer specific layout forms and templates, • Responsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validated, • Adhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Compensation Range: $105,000.00 - $130,000.00 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management position This is a full time position

⚡Join Our Growing Team as an Industrial Electrician at Superior Metals Manufacturing!⚡ Job Summary: Are you looking for your next challenge? Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system development—all while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Essential Job Functions: • Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly., • Work hands-on with 480V 3-phase electrical power distribution systems—let’s keep the lights on!, • Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise., • Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient., • Handle high voltage systems and equipment like a pro., • Get acquainted with hydraulic and pneumatic systems—your toolbox just got a little bigger!, • Utilize PLC controls and Ladder Logic Programming to enhance our automation processes., • Read and interpret electrical and hydraulic schematics and plant drawings like a map to success., • Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools., • Perform preventative maintenance tasks to keep our production equipment in top shape., • Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment., • Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters., • Inspect electrical systems for hazards and compliance—safety first!, • Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches., • Education: High school diploma or GED., • Experience: 5+ years in industrial maintenance/electrical experience., • Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus., • Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred., • Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors., • Mathematical Skills: Proficient in basic math operations—adding, subtracting, and working with fractions and decimals., • Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions., • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25 - $45 per hour, with potential to make more based on your experience, education and shift. We also have available overtime., • New Facility: Work in our brand-new, cutting-edge manufacturing environment. SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management position This is a full time position

Make Your Career in Aerospace Manufacturing! Sign-on Bonus Up to $1,000. Are you ready to join a fast-paced, collaborative environment and build a rewarding career in manufacturing? Consolidated Precision Products (CPP) is a sand-casting foundry that specializes in complex aerospace and defense products. We are looking for talented individuals to join our team. We'll provide the training to give you the skills you need to succeed. What matters most is your energy, strong work ethic, attendance, and dedication to quality. This is a great opportunity to join a stable & growth-oriented company that has been in business for over 100 years! What do we have to offer you? • Starting at $25/hour (Or more with direct experience), • Paid training and overtime potential, • Full benefits package which includes Medical/dental/vision/life/disability insurance, • Quarterly bonus program and 401(k) with match, • Robust paid PTO & holiday pay, • Upward mobility and leadership that strives to help you succeed., • Sign-on bonus up to $1,000 to welcome you aboard! What will you do?, • Places film against viewing screen to conduct initial and final reading and interpreting by examining castings for flaws such as blows, cracks, excess sand, wires, gas porosity gas holes, core shifts, segregation, etc., • Ensures all developed film contains the proper number of X-ray shots, types of angles, part numbers and other requirements specified by the Company or customers., • Uses densitometer to ensure film coming out of the developer meets density specifications., • Ensures all film is properly developed by checking appropriate gauges, temperatures, etc., • As required, types up customer reports identifying X-ray reading results and interpretations., • Acquire additional certifications and credentials as required for work or career development, • Work on/participate in special projects as needed or assigned by management Qualifications:, • Education: High school diploma or equivalent required, • Experience: 1-2 years of directly related NDT experience Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires access or use of hardware and technology which is subject to the International Traffic in Arms Regulations (ITAR) and Export Administration (EAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. “green card holder”), Political Asylee (permanent), or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. E.O.E. This is a non-management position This is a full time position

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES • Demonstrated ability to understand and work with advanced “shop” mathematical concepts., • High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming., • Excellent analytical and problem solving and resolution capability., • Enthusiasm, drive, and work ethic in an ‘on-time’ environment., • Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues., • Demonstrates a solid understanding of 3D modeling software., • Has the ability to create training materials and train shop floor employees., • Possesses creative thinking skills and is a detail-oriented personality., • Is able to communicate well to other members of the development team., • Eliminate waste and elevates productivity using Lean Manufacturing program., • Participate in the startup of new equipment., • Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers., • Adhere to AS9100 and ISO procedures and compliance, • Ensures all equipment controls are accurately defined and maintained., • Contributes to team effort by accomplishing related results as needed., • Responsible for adherence to all safety policies, practices and procedures., • Ability to work flexible hours and demonstrate reliability., • Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred., • Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines., • Knowledge of 3D modeling software and Gcode a must., • Familiar with Motion Control and Vision., • Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues., • Experience and skill in troubleshooting control systems., • Knowledge of GD&T practices, • Experienced in interpretation of technical drawings CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management position This is a full time position

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES • Demonstrated ability to understand and work with advanced “shop” mathematical concepts., • High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming., • Excellent analytical and problem solving and resolution capability., • Enthusiasm, drive, and work ethic in an ‘on-time’ environment., • Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues., • Demonstrates a solid understanding of 3D modeling software., • Has the ability to create training materials and train shop floor employees., • Possesses creative thinking skills and is a detail-oriented personality., • Is able to communicate well to other members of the development team., • Eliminate waste and elevates productivity using Lean Manufacturing program., • Participate in the startup of new equipment., • Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers., • Adhere to AS9100 and ISO procedures and compliance, • Ensures all equipment controls are accurately defined and maintained., • Contributes to team effort by accomplishing related results as needed., • Responsible for adherence to all safety policies, practices and procedures., • Ability to work flexible hours and demonstrate reliability., • Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred., • Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines., • Knowledge of 3D modeling software and Gcode a must., • Familiar with Motion Control and Vision., • Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues., • Experience and skill in troubleshooting control systems., • Knowledge of GD&T practices, • Experienced in interpretation of technical drawings CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management position This is a full time position