Avionics jobs in San Francisco, CaliforniaCreate job alerts

Lead Thermal Engineer About the Role: We are seeking a Lead Thermal Engineer to own the design, analysis, and validation of thermal control solutions for a high-altitude aerospace vehicle operating in extreme stratospheric environments. This role is responsible for ensuring reliable thermal performance of avionics, payloads, energy systems, and structures through a combination of modeling, hardware support, and test validation. Key Responsibilities: • Design and optimize active and passive thermal control architectures, • Perform steady-state and transient thermal analyses, • Develop and correlate thermal models across mission environments, • Support material, insulation, coating, radiator, and interface trade studies, • Define thermal requirements, margins, and operating limits for critical subsystems, • Support environmental testing: thermal vacuum, altitude simulation, temperature cycling, • Analyze test results, correlate against predictions, and drive design improvements, • Collaborate across mechanical, electrical, systems, and manufacturing teams, • Document analyses, compliance, and test readiness for flight hardware Required Qualifications: • BS in Mechanical or Aerospace Engineering (or related field), • 5–10 years hands-on thermal engineering experience on aerospace or flight systems, • Proven ownership of thermal decisions through design, integration, and validation, • Strong applied heat transfer expertise, especially in low-density environments, • Experience with ANSYS, Thermal Desktop, COMSOL, or similar tools

Senior Electrical Engineer - Design Salary: $150k - $215k +equity Location: San Francisco (generous relocation package available) The Role - Electrical Engineer Develop power electronics focused avionics for our next generation aircraft. My client are at the forefront of advanced autonomous delivery and robotic systems, they are looking for an Electrical Engineer with a strong foundation in board level design and an excellent grasp of electronics development, processes, and tools Responsibilities - Electrical Engineer • Engineer avionics for volume production through a full design cycle including requirements, prototype, schematic capture, layout, and validation., • Lead trade studies, understand competing design priorities, and provide direction, • Seek out opportunities for improvement in system, vehicle, and component level design., • Collaborate cross-functionally, • Detailed Design: schematic capture, PCB layout, system integration, validation, • Production: quality, failure analysis, manufacturing, cost, • Deployment: troubleshoot field issues, develop mitigations, roll learnings into future design Experience and skillset - Electrical Engineer • 5 years of design experience including: circuit analysis, schematic capture, PCB layout, packaging, and integration., • Developing electronics for critical systems in fields such as aerospace, transportation, or medical devices, • Experience in one or more of the following Hard-switching power converters, Resonant power converters, Motor drives, Voltage, currents, Simple digital logic, Basic embedded communications busses (e.g. SPI, I2C, UART, CAN), Higher speed communications (e.g. Ethernet, LVDS) All successful Electrical Engineers will be contacted within 2 days of application

Mechanical Design Engineers - Full Lifecyle (All Levels & Multiple Teams) Avionics, Structures & Mechanisms, Powertrain & Battery, Propulsion & Ground Systems Salary: $160k - $230k +equity Location: San Francisco (generous relocation package available) The Role - Mechanical Design Engineer You’ll help design large integrated electro-mechanical systems from concept through to scaled production and global deployment. Engineers own their hardware end to end, driving designs through the full product lifecycle. Responsibilities - Mechanical Design Engineer • Design and develop electromechanical and structural assemblies, • Own system level designs using 3D and 2D CAD, • Prototype, test and iterate designs quickly, • Perform FEA, thermal analysis and hand calculations, • Ensure designs are manufacturable, inspectable and scalable, • Work closely with suppliers to optimize design for manufacture (DFM) Experience and skillset - Design Engineer • Experience designing electromechanical or structural systems, • Minimum 5 years experience, • Track record delivering complex subassemblies or full systems, • Strong CAD capability managing multi-part assemblies, • Experience with GD&T, FEA, and design for assembly, • Prototyping and hands-on development experience All successful Mechanical Design Engineers will be contacted within 2 days of application

Welcome to Planet. We believe in using space to help life on Earth. Planet designs, builds, and operates the largest constellation of imaging satellites in history. This constellation delivers an unprecedented dataset of empirical information via a revolutionary cloud-based platform to authoritative figures in commercial, environmental, and humanitarian sectors. We are both a space company and data company all rolled into one. Customers and users across the globe use Planet's data to develop new technologies, drive revenue, power research, and solve our world's toughest obstacles. As we control every component of hardware design, manufacturing, data processing, and software engineering, our office is a truly inspiring mix of experts from a variety of domains. We have a people-centric approach toward culture and community and we strive to iterate in a way that puts our team members first and prepares our company for growth. Join Planet and be a part of our mission to change the way people see the world. Planet is a global company with employees working remotely world wide and joining us from offices in San Francisco, Washington DC, Germany, Austria, Slovenia, and The Netherlands. About the Role: Planet designs, builds, and launches the largest fleet of Earth-imaging satellites in history - and the Space Systems organization is where that hardware comes to life. From satellite manufacturing and integration to RF engineering, thermal design, power systems, and deployable structures, this team is responsible for the physical infrastructure that makes global daily imaging possible. As we scale production for our next-generation constellations and stand up a second manufacturing hub in Berlin, the hiring demand across Space Systems is the largest and most technically complex in the company. As a Talent Acquisition Partner embedded in the Space Systems pod, you will own full-cycle recruiting for roles spanning hardware engineering, manufacturing operations, satellite integration and test, and specialized technical disciplines. You will develop deep domain expertise in the talent markets that matter most - learning the difference between an RF systems engineer and an optical designer, understanding why FPGA firmware experience matters for satellite avionics, and knowing which companies and programs produce the candidates our hiring managers need. This is a pod-based role, meaning your alignment to Space Systems is persistent - not rotational. You will build lasting relationships with hiring managers across the organization, develop a point of view on their teams and talent needs, and become a trusted partner who can anticipate demand rather than just react to it. You will work alongside a senior Talent Acquisition Partner who brings deep institutional knowledge of Space Systems hiring. This role is based in San Francisco, where Planet's headquarters and primary satellite manufacturing facility are located. Proximity to the Space Systems team, the manufacturing floor, and the engineering labs matters - it allows you to build credibility with hiring managers, attend design reviews and team events, and develop the contextual understanding that separates a great technical recruiter from a generalist filling reqs. You will report to the Senior Manager, Talent Acquisition and partner closely with your pod teammate, and Talent Operations to deliver against quarterly hiring targets while maintaining a high-quality candidate experience. This is a full-time, hybrid role which will require you to work from our San Francisco office 3 days per week. Impact You'll Own: • Own full-cycle recruiting for Space Systems roles - from intake and sourcing strategy through offer negotiation and close - across hardware engineering, manufacturing, satellite integration and test, and specialized technical disciplines., • Manage a requisition load of 10-15 active searches at a time, spanning a wide range of engineering specialties including mechanical, electrical, RF, thermal, power, FPGA, and manufacturing operations., • Build deep, trusted partnerships with Space Systems hiring managers - learning their team structures, technical requirements, and growth plans so you can anticipate hiring needs and proactively build pipeline before requisitions open., • Develop domain expertise in aerospace and hardware engineering talent markets - understanding where top candidates come from, what motivates them, and how Planet's mission and technical challenges differentiate us from competitors., • Collaborate with your pod teammate to balance workload across the Space Systems portfolio, share market intelligence, and ensure coverage continuity during peak hiring periods or planned absences., • Maintain accurate pipeline data in Greenhouse, run structured pipeline reviews, and use data to identify bottlenecks, adjust sourcing strategies, and forecast delivery against quarterly targets., • Champion candidate experience throughout the process - ensuring timely communication, well-prepared interview panels, and a close process that reflects the quality of the organization candidates are joining., • 4+ years of full-cycle recruiting experience, with meaningful time spent hiring for hardware engineering, manufacturing, or other technical disciplines in aerospace, defense, automotive, or adjacent industries., • Bachelor's Degree in a relevant field., • Ability to source and close passive candidates in competitive technical markets where talent pools are limited and candidates have multiple offers., • Experience managing a high-volume requisition load (10+ concurrent searches) while maintaining quality pipeline activity and consistent hiring manager communication., • Solid technical fluency - you don't need to be an engineer, but you need to credibly discuss the difference between analog and digital circuit design, understand what a thermal vacuum test is, and learn new technical domains quickly., • Experience partnering with sourcers or coordinating with external agencies to build pipelines for hard-to-fill roles, with a clear point of view on when to self-source versus leverage support., • Proficiency with Greenhouse or a comparable ATS, including pipeline management, reporting, and structured interview workflows., • Excellent judgment on candidate assessment - you can calibrate quickly with a hiring manager, push back constructively on unrealistic requirements, and advocate for strong candidates who might not check every box., • Direct experience recruiting for satellite, spacecraft, or launch vehicle programs - you understand the engineering disciplines, the clearance requirements, and the competitive landscape., • Familiarity with export control and ITAR compliance as it relates to recruiting - understanding how citizenship and clearance requirements shape candidate pools and sourcing strategies., • Experience recruiting for manufacturing operations roles (technicians, integration specialists, test engineers) in addition to design engineering - comfortable spanning the full spectrum from hourly to senior IC., • Track record of hiring in the San Francisco Bay Area aerospace and hardware ecosystem, with an existing network in the local talent community. June 25, 2026 by 11:59p / 23:59 CET (Central European Time) Benefits While Working at Planet: These offerings are dependent on employment type and geographical location, based upon applicable law or company policy. • Comprehensive Medical, Dental, and Vision plans, • Health Savings Account (HSA) with a company contribution, • Generous Paid Time Off in addition to holidays and company-wide days off, • 16 Weeks of Paid Parental Leave, • Wellness Program and Employee Assistance Program (EAP), • Home Office Reimbursement, • Monthly Phone and Internet Reimbursement, • Tuition Reimbursement and access to LinkedIn Learning, • Equity, • Commuter Benefits (if local to an office) The US base salary range for this full-time position at the commencement of employment is listed below. Additionally, this role might be eligible for discretionary short-term and long-term incentives (bonus and equity). The final salary range is determined by job related experience, skills and location. The range displays our typical hiring range for new hire salaries in US locations only. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. San Francisco Salary Range$101,400—$126,800 USD San Francisco Fair Chance Ordinance Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Why we care so much about Belonging. We're dedicated to helping the whole Planet, and to do that we must strive to represent all of it within each of our offices and on all of our teams. That's why Planet is guided by an ultimate north star of Belonging-dreaming big as we approach our ongoing work. If this job intrigues you, but you're thinking you might not have all the qualifications, please... do apply! At Planet, we are looking for well-rounded people from around the world who can contribute to more ways than just what is listed in this job description. We don't just fill positions, we aspire to fulfill people's careers, most excited about folks who are motivated by our underlying humanitarian efforts. We are a few orbits around the sun before we get to where we want to be, so we hope you're excited to come along for the ride. EEO statement: Planet is committed to building a community where everyone belongs and we invite people from all backgrounds to apply. Planet is an equal opportunity employer, and committed to providing employment opportunities regardless of race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex, gender, gender identity, gender expression, pregnancy, childbirth and breastfeeding, age, sexual orientation, military or veteran status, or any other protected classification, in accordance with applicable federal, state, and local laws. ___ Accommodations: Planet is an inclusive community and we know that everyone has their own needs. If you have a disability or special need that requires accommodation during the hiring process, please reach out to or contact your recruiter with your request. Your message will be confidential and we will be happy to assist you. Privacy Policy: By clicking "Apply Now" at the top of this job posting, I acknowledge that I have read the ___, and hereby consent to the collection, processing, use, and storage of my personal information as described therein. Privacy Policy (European Applicants): By clicking "Apply Now" at the top of this job posting, I acknowledge that I have read the ___, and hereby consent to the collection, processing, use, and storage of my personal information as described therein. AI in Our Interviewing Process: Planet is committed to providing an exceptional interview experience for all candidates. We are currently exploring AI interviewing technologies to better focus on candidates and less on trying to capture notes. As such, with the candidate's consent, select interviews may be recorded and include a Planet AI Notetaker for transcription and summarization purposes. Should an interview involve use of AI interview technologies, the candidate will receive notification and have the ability to opt out both in advance and/or real-time. Opting out will not affect one's candidacy. Candidate AI Policy: Planet embraces Artificial Intelligence (AI) tools, and we encourage its responsible use. We understand that candidates may use various resources, including AI tools, to prepare for interviews and assessments. However, during any live interview stage or when actively completing assessments for this position, the use of AI tools-e.g. Large Language Models (LLMs), deep fake technology, etc.-is strictly prohibited unless explicitly prompted by an interviewer or assessment instructions. If you are unsure about acceptable use, please contact your recruiter for clarification. If an AI tool or similar technology is desired as an accommodation, please contact with your request for assistance. Your message will be confidential, and we will be happy to assist you. Violation of this policy may result in disqualification of your application.

Welcome to Planet. We believe in using space to help life on Earth. Planet designs, builds, and operates the largest constellation of imaging satellites in history. This constellation delivers an unprecedented dataset of empirical information via a revolutionary cloud-based platform to authoritative figures in commercial, environmental, and humanitarian sectors. We are both a space company and data company all rolled into one. Customers and users across the globe use Planet's data to develop new technologies, drive revenue, power research, and solve our world's toughest obstacles. As we control every component of hardware design, manufacturing, data processing, and software engineering, our office is a truly inspiring mix of experts from a variety of domains. We have a people-centric approach toward culture and community and we strive to iterate in a way that puts our team members first and prepares our company for growth. Join Planet and be a part of our mission to change the way people see the world. Planet is a global company with employees working remotely world wide and joining us from offices in San Francisco, Washington DC, Germany, Austria, Slovenia, and The Netherlands. About the Role: Planet's Space Systems organization designs, builds, and launches the largest fleet of Earth-imaging satellites in history. This team spans satellite manufacturing and integration, RF and antenna engineering, thermal and power systems, deployable structures, and avionics - and it represents Planet's highest-volume and most technically specialized hiring demand. We are scaling production for next-generation constellations and expanding manufacturing operations, which means Space Systems hiring runs at peak intensity through the middle of our fiscal year. We are looking for an experienced contract Talent Acquisition Partner to provide coverage for a senior recruiter's planned leave of absence during this critical period. This is a full-time, approximately six-month engagement with an expected start in mid-June to allow onboarding overlap before the leave begins in July. You will step into an active portfolio of requisitions across hardware engineering and manufacturing, inherit existing candidate pipelines, and maintain delivery continuity for hiring managers who are accustomed to a high level of recruiting partnership. This is not a ramp-up role. You will be expected to operate independently within the first few weeks - running intake meetings, managing pipeline, negotiating offers, and partnering directly with Space Systems hiring managers. You will work alongside a Talent Acquisition Partner who is permanently aligned to the pod for the hardest-to-fill technical roles. You will report to the Senior Manager, Talent Acquisition for the duration of the contract. This role is based in San Francisco, where Planet's headquarters and primary satellite manufacturing facility are located. This role will require you to work from our SF HQ 3 days per week. Impact You'll Own: • Provide full-cycle recruiting coverage for the Space Systems pod during a senior team member's planned leave of absence, ensuring zero disruption to hiring delivery., • Inherit and manage an active portfolio of requisitions spanning hardware engineering, manufacturing operations, satellite integration and test, and specialized technical disciplines - picking up existing pipelines and advancing candidates through the process without losing momentum., • Partner directly with Space Systems hiring managers to maintain the caliber of recruiting partnership they expect - running intake meetings, providing market intelligence, managing expectations on timeline and candidate availability, and closing offers., • Manage 10-15 concurrent requisitions across a range of engineering specialties including mechanical, electrical, RF, thermal, power, FPGA, and manufacturing operations roles., • Collaborate with the Talent Acquisition Partner in the pod to balance workload, share pipeline intelligence, and ensure no requisitions fall through the cracks during the transition., • Maintain accurate and up-to-date pipeline data in Greenhouse, ensuring a clean handback when the senior team member returns from leave., • 6+ years of full-cycle recruiting experience, with substantial time spent hiring for hardware engineering, manufacturing, or technical disciplines in aerospace, defense, or adjacent industries., • Bachelor's Degree in a relevant field., • Ability to step into an active requisition portfolio and deliver results quickly - you have done contract or interim recruiting work before and know how to build hiring manager trust on an accelerated timeline., • Deep familiarity with aerospace, satellite, or hardware engineering talent markets - you already know which companies, programs, and talent pools produce the candidates these hiring managers need., • Experience managing a high-volume requisition load (10+ concurrent searches) with minimal supervision, maintaining quality pipeline activity and consistent stakeholder communication., • Solid technical fluency across hardware engineering disciplines - you can credibly discuss RF design, power systems, thermal analysis, and mechanical engineering at a level that earns hiring manager confidence., • Proficiency with Greenhouse or a comparable enterprise ATS, including pipeline management, reporting, and structured interview workflows., • Excellent offer negotiation skills - you can manage competing offers, navigate compensation conversations, and close candidates in a competitive market without over-relying on escalation., • Direct experience recruiting for satellite, spacecraft, or launch vehicle programs - you can walk onto a manufacturing floor, understand what you are looking at, and translate that context into a compelling candidate pitch., • Previous contract or interim recruiting engagements where you successfully covered a leave of absence or backfilled a senior recruiter - you have a playbook for fast onboarding and clean handoffs., • Familiarity with ITAR and export control compliance as it relates to recruiting, including how citizenship and clearance requirements constrain candidate pools for specific roles., • An existing network in the San Francisco Bay Area aerospace and hardware engineering talent community that you can activate immediately. June 25, 2026 by 11:59p / 23:59 CET (Central European Time) Benefits While Working at Planet: These offerings are dependent on employment type and geographical location, based upon applicable law or company policy. • Comprehensive Medical, Dental, and Vision plans, • Health Savings Account (HSA) with a company contribution, • Generous Paid Time Off in addition to holidays and company-wide days off, • 16 Weeks of Paid Parental Leave, • Wellness Program and Employee Assistance Program (EAP), • Home Office Reimbursement, • Monthly Phone and Internet Reimbursement, • Tuition Reimbursement and access to LinkedIn Learning, • Equity, • Commuter Benefits (if local to an office) The US base salary range for this full-time position at the commencement of employment is listed below. Additionally, this role might be eligible for discretionary short-term and long-term incentives (bonus and equity). The final salary range is determined by job related experience, skills and location. The range displays our typical hiring range for new hire salaries in US locations only. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. San Francisco Salary Range$128,400—$160,500 USD San Francisco Fair Chance Ordinance Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Why we care so much about Belonging. We're dedicated to helping the whole Planet, and to do that we must strive to represent all of it within each of our offices and on all of our teams. That's why Planet is guided by an ultimate north star of Belonging-dreaming big as we approach our ongoing work. If this job intrigues you, but you're thinking you might not have all the qualifications, please... do apply! At Planet, we are looking for well-rounded people from around the world who can contribute to more ways than just what is listed in this job description. We don't just fill positions, we aspire to fulfill people's careers, most excited about folks who are motivated by our underlying humanitarian efforts. We are a few orbits around the sun before we get to where we want to be, so we hope you're excited to come along for the ride. EEO statement: Planet is committed to building a community where everyone belongs and we invite people from all backgrounds to apply. Planet is an equal opportunity employer, and committed to providing employment opportunities regardless of race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex, gender, gender identity, gender expression, pregnancy, childbirth and breastfeeding, age, sexual orientation, military or veteran status, or any other protected classification, in accordance with applicable federal, state, and local laws. ___ Accommodations: Planet is an inclusive community and we know that everyone has their own needs. If you have a disability or special need that requires accommodation during the hiring process, please reach out to or contact your recruiter with your request. Your message will be confidential and we will be happy to assist you. Privacy Policy: By clicking "Apply Now" at the top of this job posting, I acknowledge that I have read the ___, and hereby consent to the collection, processing, use, and storage of my personal information as described therein. Privacy Policy (European Applicants): By clicking "Apply Now" at the top of this job posting, I acknowledge that I have read the ___, and hereby consent to the collection, processing, use, and storage of my personal information as described therein. AI in Our Interviewing Process: Planet is committed to providing an exceptional interview experience for all candidates. We are currently exploring AI interviewing technologies to better focus on candidates and less on trying to capture notes. As such, with the candidate's consent, select interviews may be recorded and include a Planet AI Notetaker for transcription and summarization purposes. Should an interview involve use of AI interview technologies, the candidate will receive notification and have the ability to opt out both in advance and/or real-time. Opting out will not affect one's candidacy. Candidate AI Policy: Planet embraces Artificial Intelligence (AI) tools, and we encourage its responsible use. We understand that candidates may use various resources, including AI tools, to prepare for interviews and assessments. However, during any live interview stage or when actively completing assessments for this position, the use of AI tools-e.g. Large Language Models (LLMs), deep fake technology, etc.-is strictly prohibited unless explicitly prompted by an interviewer or assessment instructions. If you are unsure about acceptable use, please contact your recruiter for clarification. If an AI tool or similar technology is desired as an accommodation, please contact with your request for assistance. Your message will be confidential, and we will be happy to assist you. Violation of this policy may result in disqualification of your application.

Job DescriptionAbout PykaPyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes. Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce CO2 emissions in their respective industries. What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. Pyka is seeking a Prototyping Technician to join our team in Alameda. This is a unique, cross-functional role that sits at the intersection of complex composite fabrication and precision mechanical assembly. You will be a key builder of our next-generation autonomous aircraft, moving fluidly between the layup table and the assembly floor. We are looking for a teammate who finds satisfaction in the "how" of building—someone who enjoys solving puzzles, working with their hands, and collaborating with engineers to turn a digital design into a flying reality. Whether you are coming from an aviation, automotive, marine, or creative fabrication background, we value your craftsmanship and your perspective.Responsibilities • Fabricate & Assemble: Lay up composite parts using wet layup and vacuum consolidation techniques, ensuring high-quality bond integrity and finish., • Iterative Prototyping: Collaborate with engineers to build "first-of-their-kind" parts, providing constructive feedback on design-for-manufacturability to improve future builds., • Precision Finishing: Trim, fit, and assemble composite components with a high attention to detail, using a variety of hand and power tools., • System Integration: Assist in the installation and testing of mechanical and electrical subsystems, including actuators, sensors, and wire harnesses., • Fleet Support: Conduct structural repairs and scheduled maintenance on test aircraft to ensure the fleet remains mission-ready., • Shop Stewardship: Maintain a safe, organized, and inclusive workspace, following all safety protocols for VOCs and high-voltage systems., • Documentation: Contribute to the development of assembly guides and maintenance manuals by documenting build steps and identifying areas for process improvement.Required Qualifications, • Hands-on Technical Experience: Demonstrated experience in a build or repair environment (composites, aviation, automotive, marine, or similar technical trades)., • Tool Proficiency: Comfortable and safe using a variety of pneumatic, power, and hand tools for precision drilling, grinding, and assembly., • Collaborative Mindset: Strong interpersonal skills with a focus on clear communication and a "team-first" attitude., • Attention to Detail: Ability to follow complex technical instructions and maintain high standards of quality and safety., • Adaptability: A proactive approach to problem-solving and the ability to stay organized in a fast-paced prototyping environment., • Physical Dexterity: Comfort working in a shop environment, including handling materials, utilizing PPE, and performing tasks that require manual precision.Preferred Qualifications, • Composite Expertise: 1+ years of experience with vacuum bagging, mold prep, and various resin systems., • Technical Literacy: Ability to read and interpret 2D technical drawings or interact with 3D CAD models., • System Troubleshooting: Basic understanding of electrical systems, including using a multimeter or inspecting wiring and connectors., • Safety Knowledge: Familiarity with high-voltage safety or experience working with safety-critical mechanical systems., • Continuous Improvement: Experience providing feedback to engineering teams to help refine parts or assembly processes., • Certifications: FAA A&P certification or specialized composite training is a plus, but not required., • We understand that candidates bring different strengths and experiences, and you don’t need to meet every qualification to be considered. If this role excites you, we’d love to learn more about you. You may be a great fit even if your background doesn’t align perfectly with the list.Compensation and Benefits, • $34.50 - 39 per hour + equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Hourly wage ranges are subject to change., • Employer-sponsored health, dental, vision, long-term disability and life insurance, • FSA with employer matching, • 401(k) plan, • Paid holidays, generous PTO, and additional unpaid time off, • Voluntary short-term disability and life insurance, • Pre-tax commuter benefits

Welcome to Planet. We believe in using space to help life on Earth. Planet designs, builds, and operates the largest constellation of imaging satellites in history. This constellation delivers an unprecedented dataset of empirical information via a revolutionary cloud-based platform to authoritative figures in commercial, environmental, and humanitarian sectors. We are both a space company and data company all rolled into one. Customers and users across the globe use Planet's data to develop new technologies, drive revenue, power research, and solve our world's toughest obstacles. As we control every component of hardware design, manufacturing, data processing, and software engineering, our office is a truly inspiring mix of experts from a variety of domains. We have a people-centric approach toward culture and community and we strive to iterate in a way that puts our team members first and prepares our company for growth. Join Planet and be a part of our mission to change the way people see the world. Planet is a global company with employees working remotely world wide and joining us from offices in San Francisco, Washington DC, Germany, Austria, Slovenia, and The Netherlands. About the Role: Planet's Flight Software Team is responsible for all of the embedded software that powers our diverse fleet of Superdove, Skysat, Pelican, and Tanager satellites. The software we build and maintain deploys to orbiting spacecraft hundreds of kilometers away and spans many functional verticals, including navigation and avionics, payload control, radio software, onboard autonomy, and supporting tooling and infrastructure. We collaborate closely with many other teams at Planet, including the Payload, EE, RF, Ground Software, and Missions teams, to deliver reliable and innovative solutions that ensure the success of Planet's missions. As a Flight Software Engineer at Planet, you will play a key role in the definition, development, maintenance, and optimization of this critical software. Our mission is to create seamless, intuitive systems that enable spacecraft operators, analysts, and engineers at Planet to interact reliably with our assets in space. We strive to minimize operational burden and automate all aspects of satellite operations. In this role, you will solve a wide range of complex engineering challenges in a dynamic environment. You will design and implement new APIs, refine existing ones, and evaluate and select appropriate software technologies for given use cases. You will own and conduct root cause analyses which may cross software components as well as hardware domains; at times the target you're debugging will be hundreds of kilometers away with limited bandwidth and periodic windows for communication. You will help design and deploy critical infrastructure, ensuring it meets operational demands and scales effectively to support Planet's evolving missions. Finally, you will collaborate with operators and other key stakeholders to iteratively refine these systems, ensuring they meet today's needs while advancing Planet's broader mission to deliver insights that change how we see the world. This is a full time, hybrid role which will require you to be in our San Francisco office 3 days per week. Impact You'll Own: • Independently own root cause investigations for complex bugs and implement robust fixes across our embedded targets, including bare-metal, RTOS, and Linux-based application code., • Design, implement, and test new features and software components for new and existing satellite platforms with minimal guidance from technical leads., • Analyze system performance and propose/implement software improvements to enhance fleet robustness, efficiency, and capability., • Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering, or a related field., • 4+ years of professional software development experience, with solid proficiency in C or C++ for embedded systems (RTOS or bare-metal)., • Experience with Python for scripting, testing, and data analysis., • Excellent communication skills, including the ability to explain technical concepts to a variety of stakeholders such as engineers, satellite operators, and engineering project managers., • Professional experience working under agile development using the Git version control system., • Experience in multiple programming languages and operating systems., • Linux/Unix systems programming experience such as memory-mapped files, network protocol development, process memory management, etc., • Direct experience with RTOS and bare metal development on ARM microcontrollers (e.g., STM32)., • Experience writing software for FPGA softcores, RISC-V or otherwise., • Experience developing or deploying applications for edge computing, such as onboard data processing or machine learning inference. June 24, 2026 at 11:59p PT EAR/ITAR Requirements: This position requires access to export-controlled information, and as such, employment (or hiring of a contractor) is contingent upon the candidate's ability to access all applicable export-controlled information without additional export licensing being required by the Bureau of Industry and Security and/or the Directorate of Defense Trade Controls. Benefits While Working at Planet: These offerings are dependent on employment type and geographical location, based upon applicable law or company policy. • Comprehensive Medical, Dental, and Vision plans, • Health Savings Account (HSA) with a company contribution, • Generous Paid Time Off in addition to holidays and company-wide days off, • 16 Weeks of Paid Parental Leave, • Wellness Program and Employee Assistance Program (EAP), • Home Office Reimbursement, • Monthly Phone and Internet Reimbursement, • Tuition Reimbursement and access to LinkedIn Learning, • Equity, • Commuter Benefits (if local to an office) The US base salary range for this full-time position at the commencement of employment is listed below. Additionally, this role might be eligible for discretionary short-term and long-term incentives (bonus and equity). The final salary range is determined by job related experience, skills and location. The range displays our typical hiring range for new hire salaries in US locations only. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. San Francisco Salary Range$144,500—$180,600 USD San Francisco Fair Chance Ordinance Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Why we care so much about Belonging. We're dedicated to helping the whole Planet, and to do that we must strive to represent all of it within each of our offices and on all of our teams. That's why Planet is guided by an ultimate north star of Belonging-dreaming big as we approach our ongoing work. If this job intrigues you, but you're thinking you might not have all the qualifications, please... do apply! At Planet, we are looking for well-rounded people from around the world who can contribute to more ways than just what is listed in this job description. We don't just fill positions, we aspire to fulfill people's careers, most excited about folks who are motivated by our underlying humanitarian efforts. We are a few orbits around the sun before we get to where we want to be, so we hope you're excited to come along for the ride. EEO statement: Planet is committed to building a community where everyone belongs and we invite people from all backgrounds to apply. Planet is an equal opportunity employer, and committed to providing employment opportunities regardless of race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex, gender, gender identity, gender expression, pregnancy, childbirth and breastfeeding, age, sexual orientation, military or veteran status, or any other protected classification, in accordance with applicable federal, state, and local laws. ___ Accommodations: Planet is an inclusive community and we know that everyone has their own needs. If you have a disability or special need that requires accommodation during the hiring process, please reach out to or contact your recruiter with your request. Your message will be confidential and we will be happy to assist you. Privacy Policy: By clicking "Apply Now" at the top of this job posting, I acknowledge that I have read the ___, and hereby consent to the collection, processing, use, and storage of my personal information as described therein. Privacy Policy (European Applicants): By clicking "Apply Now" at the top of this job posting, I acknowledge that I have read the ___, and hereby consent to the collection, processing, use, and storage of my personal information as described therein. AI in Our Interviewing Process: Planet is committed to providing an exceptional interview experience for all candidates. We are currently exploring AI interviewing technologies to better focus on candidates and less on trying to capture notes. As such, with the candidate's consent, select interviews may be recorded and include a Planet AI Notetaker for transcription and summarization purposes. Should an interview involve use of AI interview technologies, the candidate will receive notification and have the ability to opt out both in advance and/or real-time. Opting out will not affect one's candidacy. Candidate AI Policy: Planet embraces Artificial Intelligence (AI) tools, and we encourage its responsible use. We understand that candidates may use various resources, including AI tools, to prepare for interviews and assessments. However, during any live interview stage or when actively completing assessments for this position, the use of AI tools-e.g. Large Language Models (LLMs), deep fake technology, etc.-is strictly prohibited unless explicitly prompted by an interviewer or assessment instructions. If you are unsure about acceptable use, please contact your recruiter for clarification. If an AI tool or similar technology is desired as an accommodation, please contact with your request for assistance. Your message will be confidential, and we will be happy to assist you. Violation of this policy may result in disqualification of your application.

About the Team The Production Technician - Electronics reports directly to the Mission Equipment Production Technical Supervisor; based at our Military Vehicle Centre of Excellence (MILVEHCOE). As a part of the global integrated Electronics Solutions team, you will work closely with the LAND 400 Phase 2 program execution team and CoA. About the Role The Production Technician - Electronics is responsible for the assembly, testing and inspection of high-quality electronic and optical equipment in support of the LAND 400 Phase 2 program. This role plays a key part in the production process, ensuring that all components meet technical specifications and performance standards. Technicians conduct functional and diagnostic testing using specialised test equipment. They perform routine inspections to ensure compliance with technical and quality standards, maintain and calibrate production and test equipment. Collaboration with engineering and quality teams ensures efficient workflow and issue resolution. WHAT QUALIFICATIONS YOU SHOULD HAVE What are we looking for? Rheinmetall seeks applicants who exemplify our Company's values of Safety, Partnering, Openness, Respect and Trust (SPORT). This creates a workplace environment where employees value each other, live up to their promises and communicate openly. The experience and skillset best suited to this role includes: • The successful completion of a Certificate III or higher as an electronics technician (or equivalent - Avionics qualification highly regarded) with sound professional working experience;, • Proven experience working within an electronics and or optics (Avionics) maintenance or production environment;, • Experience in fault localisation in electronic circuits and devices;, • Professional knowledge in the field of analogue and digital circuit technology;, • Experience with fine motor skills in PCBA repair, wiring, motors and resolvers, plus other devices and systems;, • Electronic and optical systems technical knowledge;, • Ability to travel internationally when required; and, • Eligibility to obtain an Australian Government Security Clearance (Australian Citizenship required).\n WHAT WE OFFER YOU • Uniforms, tools and training provided;, • Long weekends every second week with a 9 day fortnight;, • Access to exclusive employee discounts with over 500 retailers to support cost of living;, • Market leading parental leave and loyalty leave accrual for every year of service;, • We are proud to be an Endorsed Employer for All Women with WORK180.\n CONTACT INFORMATION RDA Talent Acquisition Team [email protected] #LI-DM1 Applications will close on 18th of April 2026. Jetzt bewerben!

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of TeraWave, a satellite communications network designed to deliver symmetrical data speeds of up to 6 Tbps anywhere on Earth. This network will service tens of thousands of enterprise, data center, and government users who require reliable connectivity for critical operations. The Emerging Systems business unit at Blue Origin is pioneering the future of space-based communications with TeraWave, a revolutionary satellite communications network designed to deliver symmetrical data speeds of up to 6 Tbps anywhere on Earth. This multi-orbit constellation will consist of 5,408 optically interconnected satellites in low Earth orbit (LEO) and medium Earth orbit (MEO), providing enterprise-grade connectivity for critical operations worldwide. As a Senior Embedded Software Architect at Blue Origin, you will lead the design and development of sophisticated embedded software systems for flight and payload applications. Yourexpertisewill be crucial in creating robust, high-performance software architectures that enable reliable operation in the challenging space environment. You will provide technical leadership across multiple projects,establishingstandards and best practices while mentoring software engineering teams to deliver innovative solutions for our space systems. Special Mentions: * Relocationassistancemay be available for this position * Travel expectations: Up to 10% travel may berequiredfor technical reviews, supplier coordination, and collaboration with distributed teams Responsibilities include but are not limited to: Architecture & Design Leadership * Lead the architectural design and development of embedded software systems for flight and payload applications, ensuringoptimalperformance, reliability, and safety * Define and implement software architecture for high throughput packet switching systems, incorporating IP TCP/UDP protocols and advanced routing capabilities * Collaborate with hardware engineers to develop andoptimizeFPGA-based solutions for critical flight systems * Design and implement robust fault management systems to ensure mission success in the challenging space environment Technical Standards & Mentorship * Establish technical standards, best practices, and coding guidelines for embedded software development across projects * Provide technical leadership and mentorship to software engineering teams, fostering innovation and excellence * Evaluate and selectappropriate technologies, frameworks, and tools to meet project requirements and enhance system capabilities * Lead design reviews and technical assessments to ensure software solutions meet performance, reliability, and security requirements Systems Integration & Documentation * Develop andmaintainsoftware architecture documentation, including interface specifications and design patterns * Collaborate with systems engineers to translate mission requirements into software architecture specifications * Participate in failure analysis and implement corrective actions to enhance system robustness * Contribute to research and development efforts to advance Blue Origin's embedded software capabilities Minimum Qualifications: * Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering, or related technical field * 10+ years of experience in embedded software development, with at least 5 years in architectural roles * Demonstrated experience with flight software or payload systems in aerospace applications * Strong knowledge of network protocols including IP, TCP/UDP, and routing technologies * Experience with FPGA integration and hardware/software co-design * Proficiencyin embedded programming languages such as C, C++, and assembly language * Experience designing and implementing fault-tolerant systems with comprehensive error detection and recovery mechanisms * Knowledge of real-time operating systems (RTOS) and embedded Linux environments * Experience with software development for resource-constrained environments Preferred Qualifications: * Master's degree or Ph.D. in Computer Science, Computer Engineering, or related field * Experience with spacecraft avionics systems and flight software development * Knowledge of DO-178B/C software development processes for safety-critical systems * Experience withhigh-reliabilityembedded systems in aerospace, defense, or similar industries * Familiarity with communication protocols used in space systems (e.g.,SpaceWire, CAN, MIL-STD-1553) * Experience with model-based design tools such as MATLAB/Simulink * Knowledge of cybersecurity principles for embedded systems * Experience with software-defined radio (SDR) technologies * Background in developing systems for space-based applications * Experience leading technical teams and mentoring junior engineers * Demonstrated ability to balance technical excellence with pragmatic solutions to meet program schedules Why Blue Origin: At Blue Origin, we are driven by our company motto, GradatimFerociter, meaning "Step by Step,Ferociously." We believe that humanity's future is in space, andwe'recommitted to developing the technologies that will make that vision a reality. As a Senior Embedded Software Architect,you'llplay a crucial role in designing the software systems that control and manage our spacecraft and payloads, directly contributing to our mission of building a road to space for the benefit of Earth. We are building a team of passionate builders. Job descriptions are not perfect checklists. If you are excited about this mission but your experiencedoesn'talign perfectly with every qualification, we encourage you to apply. You may be the right candidate for this or other roles. Compensation Range for: CA applicants is $197,529.00 - $276,539.55 WA applicants is $197,529.00 - $276,539.55 Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request. California Applicant Privacy Notice If you are a California resident, please reference the CA Applicant Privacy Notice ___.

Spacecraft subsystems can include any of power, payload data processing, command and control radios, high speed downlink radios and general avionics.

A leading space technology company in San Francisco is looking for a Senior Electrical Engineer to lead the avionics team.

A pioneering aerospace company in San Francisco is looking for a Senior Electrical Engineer to lead the design of critical satellite systems.The role requires extensive experience in hardware development and collaboration with a multidisciplinary team.Ideal candidates will possess deep knowledge in

As a senior electrical engineer on the Avionics team at Astranis you will be responsible for leading designs for the sub-systems that form the backbone of our satellites' internal communication, power distribution, sensor aggregation, and flight computer systems. Collaborate with a multidisciplinary

Job DescriptionAbout PykaPyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes. Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce CO2 emissions in their respective industries. What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. Role OverviewPyka is seeking a driven and detail-oriented Global Supply Manager for procurement, sourcing, and supplier management across our international supply chain operations.. You will join during a period of rapid growth and play a critical role in building a resilient, scalable supply chain to support production of our autonomous electric aircraft.In this role, you will leverage your experience working with global contract manufacturers to source high-quality components, negotiate competitive terms, and help set strategies for the future growth of the Pyka supply chain.. You will collaborate closely with engineering, production, and quality teams to ensure materials arrive on time, meet rigorous standards, and support Pyka’s mission of delivering safe, clean, and cost-effective autonomous aviation solutions worldwide.Responsibilities • Perform essential procurement functions including requesting quotations, negotiating pricing, MOQs, Net Terms, Inventory Levels, Creating Purchase Orders, Managing Open and Planned orders, to ensure timely and cost-effective acquisition of materials and services., • Establish and maintain strong relationships with suppliers, fostering collaboration to enhance quality and delivery performance while addressing any issues that arise., • Collaborate with production, engineering and customer service teams to schedule inbound material deliveries, ensuring that materials arrive on time to support production and customer schedules, and minimize shortages., • Effectively implement both engineering and manufacturing change orders in the ERP/MRP and any other systems used to track procurement, inventory or production, • Track supplier performance to on time delivery, quality and cost with monthly metrics and KPIs and quarterly business reviews with suppliers., • Communicate with suppliers regarding return material authorizations (RMAs) and non-conformance reports (NCRs), ensuring that quality issues are addressed promptly and effectively. And partner with internal resources to manage and disposition items undergoing quality review or design changes., • Maintain accurate master data related to pricing, lead times, standard costs and inventory levels. Analyze part, commodity and supplier specific data to inform strategic procurement decisions., • Setup and optimize workflows for the Procurement function within the ERP/MRP system, as well as help the Supply Chain team establish resilient and robust processes as the organization grows, • Coordinate both inbound and outbound logistics with internal stakeholders and freight forwarders., • Ensure all shipments adhere to local and international trade laws, including tariffs, quotas, and country-specific regulations for imports and exports., • Assist the rest of the Supply Chain team and wider Pyka organization on import and export of goods, • Assist with Inventory Management and Material Handling in the Stock Room as needed, • Help develop processes for scheduling as well as tracking procurement, logistics, stock room/warehouse operations within the ERP/MRP system., • Help assess and improve existing logistics workflows to enhance efficiency and reduce costs.Qualifications, • Bachelor's degree in supply chain management, business administration, engineering, or a related field., • 3+ years past experience in a fast-paced manufacturing environment in a supply chain role where complex mechanical and/or electro-mechanical assemblies were built., • Proven track record of executing on day to day procurement, logistics and related responsibilities, • Proven track record working with CM’s in China and Mexico at both the component as well as assembly level, • Excellent cross-functional collaboration, time management and prioritization skills, • Deep understanding of supply chain dynamics, including supplier evaluation, quality assurance, and risk management., • Deep understanding of ERP/MRP systems and the functional workflows for procurement and logistics, • Experience working in a Quality Management SystemPreferred Qualifications, • Previous experience in electro-mechanical products, robotics, autonomous hardware, defense, aerospace, automotive, high tech, or another related industry., • Previous experience in implementing ERP systems as they relate to supply chain and logistics (ex., supplier portal, warehouse management system...etc.)., • Strong team player who can wear different hats to help your team move forward. Willing to tackle individual contributor tasks while managing a small team., • Experience in a “Big” company environment as well as a startup., • We understand that candidates bring different strengths and experiences, and you don’t need to meet every qualification to be considered. If this role excites you, we’d love to learn more about you. You may be a great fit even if your background doesn’t align perfectly with the list.Compensation and Benefits, • $125,000 - $180,000 per year base salary + equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Salary ranges are subject to change., • Employer-sponsored health, dental and vision insurance, • FSA with employer matching, • 401(k), • Paid holidays, generous PTO, and additional unpaid time off, • Voluntary short-term disability, long-term disability, and life insurance, • Pre-tax commuter benefits

Hardware Test Engineer you will work within the avionics engineering team to support production and delivery of satellite avionics hardware Line Replaceable Units (LRUs) into the Amazon Leo satellite integration line. This position requires a technical understanding of functions of avionics subsyste

Hardware Test Engineer to support avionics manufacturing processes and collaborate with cross-functional teams.

Job Description About the Opportunity: Saratech is seeking a Mechanical Engineer to support the design, analysis, assembly, and testing of advanced spacecraft systems for a cutting-edge aerospace program. This role offers hands-on involvement across the full hardware lifecycle, from concept through environmental testing, in a fast-paced engineering environment. Salary Range: BS or MS in Mechanical Engineering, Aerospace Engineering, or related field * 3+ years of spacecraft mechanical design and integration experience (or equivalent) * Proficiency with CAD software (NX preferred) * Experience with structural and thermal hand calculations (FEA preferred but not required) * Experience designing and fabricating composite and/or metallic components * Ability to generate engineering drawings with appropriate GD&T * Ability to read and interpret engineering drawings and schematics * Strong problem-solving and critical-thinking skills * Self-motivated with the ability to prioritize tasks in a dynamic environment * Strong teamwork and communication skills Duties and Responsibilities: • Design, analyze, procure, assemble, and test spacecraft structures, mechanisms, and solar arrays Define loads, interfaces, and functional requirements at component and system levels * Select materials and mechanical components suitable for space environments * Apply Design for Manufacturing (DFM) and Design for Assembly (DFA) principles * Contribute to spacecraft-level mechanical architecture * Collaborate with electrical engineers to integrate avionics and wiring harnesses * Perform mechanical and/or thermal analyses using hand calculations and analysis tools * Generate manufacturing drawings, manage bills of materials (BOMs), and source components * Participate in hands-on prototyping, assembly, and functional testing * Support sub-assembly and vehicle-level environmental testing (vibration, thermal vacuum, etc.) * Design ground support equipment including assembly jigs, test fixtures, and mass offload systems * Support vehicle integration efforts across engineering teams * Assist with improvements to manufacturing, test, and integration facilities * Identify opportunities to improve operational efficiency Skills and Abilities: • Experience with spacecraft environmental testing (launch vibration, thermal vacuum), • Passion for hands-on hardware development, • Experience with composite structures, • Proficiency with NX, • Experience with Thermal Desktop and/or NX Nastran, • Machine shop prototyping experience (CNC mill/router, mill, lathe, laser cutter, 3D printer), • Complies with all organizational policies and procedures, • Maintains strict confidentiality of all customer and/or employee information to assure customer and/or employee rights are protected, • Adheres to policies regarding notification of absence and PTO requests, • Attends all mandatory management and staff meetings, • Represents the organization in a respectful and professional manner, • Attend and comply with annual health, safety, training, and education requirements, • Physical demands:, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • The ideal candidate must be able to complete all physical requirements of the job with or without a reasonable accommodation., • Must be able to remain in a stationary position 50% of the time. The person in this position needs to occasionally move about inside the office to access file cabinets, office machinery, etc., • Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine, and computer printer., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Follow detailed complex directions, reason and problem solve., • The person will frequently communicate and converse with other staff. Must be able to exchange accurate information in these situations., • Company participates in E-Verify., • Company is committed to providing equal employment opportunity without regard to race, color, religion, sex, sexual orientation, national origin, age, disability, or any other protected status with respect to recruitment, hiring, promotion, and other terms and conditions of employment., • Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time;, • This description reflects managements assignment of essential functions, it does not proscribe or restrict the tasks that may be assigned Insurance: All full-time regular employees (and dependents) are eligible to get medical, dental, vision coverage. Employees also can buy up on benefits like FSA, HSA, Life insurance, long and short-term disability. Comprehensive health care and wellness plans Retirement Plan: All employees can enroll in the company's 401k with company matching. Paid Time Off: All full-time regular exempt employees are eligible for our Discretionary Time Off vacation policy after 90 days from their start date, Discretionary Time Off plan is a non-accrual plan for employees. All full-time regular non-exempt employees are eligible for our Paid Time Off Plan policy after 90 days, Paid Time Off plan is an 3.33 hours accrual per pay period for employees. Paid Time Off: All full-time regular exempt employees are eligible for our Discretionary Time Off vacation policy after 90 days from their start date, Discretionary Time Off plan is a non-accrual plan for employees. All full-time regular non-exempt employees are eligible for our Paid Time Off Plan policy after 90 days, Paid Time Off plan is an 3.33 hours accrual per pay period for employees. Paid Holidays: All full-time employees will receive 8 paid holidays per year. Full-time non-exempt employees receive an extra floater holiday per year. Paid Sick Time: All full-time and part-time employees will receive 40 sick hours per year or minimum sick time required by the state. NOTE TO STAFFING AGENCIES AND RECRUITERS: Saratech does not accept unsolicited resumes from any external agency for the placement of any position. Unsolicited resumes submitted by agencies and received by Saratech will be considered the property of Saratech and may be contacted and engaged with directly by Saratech. Saratech will not pay a placement fee or any other fees to any third-party agency, firm, or recruiter who is not specifically retained with a signed fee agreement by Saratech Human Resources to conduct a candidate search. Please do not forward unsolicited resumes to our website or to any Saratech employee. Saratech will not be responsible for any fees associated with unsolicited resumes. EQUAL EMPLOYMENT OPPORTUNITY NOTICE: Paydarfar Industries, Inc. dba Saratech is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, disability, protected veteran status, or any other basis protected by applicable federal, state, or local law. #HI Subject to background check

Job DescriptionABOUT ZIPLINE Zipline is the world's largest and most experienced autonomous delivery service, founded to serve all humans equally by ensuring access to essential goods anytime, anywhere. We design, build, and operate the world's largest autonomous logistics system, delivering critical supplies quickly and reliably. Today, Zipline operates on four continents, makes a delivery somewhere in the world every 30 seconds, and has completed millions of deliveries including blood, vaccines, medical supplies, food, and commercial products. Our customers include healthcare systems, governments, retailers, and global brands who rely on us to save lives, reduce emissions, increase economic opportunity, and provide new logistics services at scale. Our technology goes beyond drones. We deploy integrated logistics infrastructure that strengthens supply chains, reduces congestion, and enables instant delivery, transforming how essential goods reach people everywhere. With more than 140 million commercial autonomous miles safely flown, Zipline is redefining access to healthcare, consumer products, and food across the globe. We operate at a global scale and are looking for practical problem solvers who thrive on real-world challenges and rapid growth. Our team is motivated by building systems that have a direct, meaningful impact on people's lives and by scaling the future of logistics. ABOUT YOU AND THE ROLE Does quickly developing multiple iterations of systems to test novel components through the extreme environments demanded of aerospace applications sound like the way you want to spend your time? Do you love designing tests for cross-functional interfaces with little information, full ownership, and the responsibility to make it happen? At Zipline our work is intended for the field. Patients are counting on it today--there is no time for aiming low or coming up short. If leveraging your talent to drive manufacturing test, design validation, and managing technical risk with a small but dedicated team at your side sounds like your cup of tea, please read on. Zipline is at the forefront of a logistics revolution: We design, manufacture, and operate our own fleet of autonomous drones to make deliveries of supplies to people in need within minutes, 7 days a week. We are hiring Harnessing and Interconnect Integration Test Engineers within the Avionics Department. We are a hardware engineering organization with mechanical, electrical, embedded systems, test software, and test engineering all responsible for the design and validation of flight hardware and operations equipment. This role is critical to the integration, reliability, and success of the overall vehicle, pulling together cross-functional stakeholders and performing design validation to ensure our vehicles are ready to fly in commercial operations. We are working on a product that can be deployed in hours, integrate seamlessly with our customers, and operate without human intervention while being deployed worldwide at scale. WHAT YOU'LL DO As a member of the Avionics Test Team you will be responsible for cradle-to-grave design validation and implementation of test systems used to develop and prove concept functionality and key reliability metrics on Zipline systems. You will be directly responsible for all interconnect and harnessing systems, some of which are well defined, and others which will require you to do critical analysis and validation to ensure we are delivering a product that will WOW our customers. To accomplish this you will need to do the following: • Work closely with the design and reliability teams to generate requirements for product design validation and test assets that accurately capture the intended function of the vehicle while leaving the door open for automation and high volume capacity., • Work closely with integration and production on handling best practices and vehicle-integration., • Explore and define product edge cases based on data you collect from the field, existing logs, component and system test, and in anticipation of future use cases and environments., • Design, build, and maintain critical test assets and equipment for production and design validation., • Manage test development and design derisk for early stage designs. This will include ruthlessly prioritizing where our efforts must be spent to get the most out of every precious day., • Pivot often as we navigate uncertain regulatory space and learn more about what it will take to really wow our customers in real-world environments. WHAT YOU'LL BRING * • Strong mechanical and test engineer fundamentals. You understand the theory behind good design decisions and have a proven track record of executing complex design validation test campaigns for requirement verification., • Design for user experience of harnessing and interconnect test systems. You can develop a machine that accomplishes complex interactions reliably and can be used by anyone with minimal training., • Cross functional integration and design definition of key vehicle interfaces and clear communication to multiple stakeholders., • Cross functional team management experience such that you can balance the needs of structures, aero, embedded, and software engineering teams to create one product that works for all., • Understand when we can get away with a quick and dirty or scrappy solution and when it is worth our time and money to make investments in the future., • Must be eligible to work in the US The starting cash range for this role is $130,000 - $180,000. Please note that this is a target, starting cash range for a candidate who meets the minimum qualifications for this role. The final cash pay for this role will depend on a variety of factors, including a specific candidate's experience, qualifications, skills, working location, and projected impact. The total compensation package for this role may also include: equity compensation; discretionary annual or performance bonuses; sales incentives; benefits such as medical, dental and vision insurance; paid time off; and more. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, ancestry, national origin, religion or religious creed, mental or physical disability, medical condition, genetic information, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity, gender expression, age, marital status, military or veteran status, citizenship, or other characteristics protected by state, federal or local law or our other policies. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Job DescriptionAbout PykaPyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes. Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce CO2 emissions in their respective industries. What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. Role Overview Pyka is looking for an Electrical Engineer to join our experienced and enthusiastic team of engineers. In this role, you will be responsible for system level and component level design and testing across a wide range of subsystems. Below is a list of current hardware projects that you will contribute to. Your roles and responsibilities will vary significantly from one week to the next. * Dual-computer flight computer with multiply redundant power distribution system for actuators and avionics * High power density motor controller (30kW ~ 100kW) * BMS/Contact controller for redundant battery system * Air data board * Electronics for spray systems * Various PCBs to streamline testing of the above hardware Candidates who thrive in fast-paced environments working with a small team will love this role. Responsibilities • Develop complex electrical subsystems involving FPGA, microprocessors, power, analog, and sensor integrations, • Complete the entire PCBA design cycle including architecture selection, component selection, schematic design, PCB layout, and working with manufacturers, • Test and validate subsystems to meet performance and reliability requirements, • Work with cross-functional teams (Mechanical Engineering, Software, and Flight Testing) on aircraft integration and system level testing, • Occasional travel (approximately one week every 2-3 months) to customer sites to support new aircraft deployments or EE subsystem debugging, • Write design and testing documents, • We understand that candidates bring different strengths and experiences, and you don’t need to meet every qualification to be considered. If this role excites you, we’d love to learn more about you. You may be a great fit even if your background doesn’t align perfectly with the list.Preferred Qualifications, • 3+ years of hands-on experience designing and testing microprocessor based circuitry and interfaces to various peripherals; experience with (low to medium speed) FPGA is a plus, • Experience designing power electronics systems such as DC-DC converters, BMSs, and motor controllers, • Experience designing safety critical systems, considering system redundancy as well as failure mode and effects analysis, • Familiarity with general schematic design and PCB layout tools such as Altium, OrCAD, Allegro, Eagle, KiCad, etc., • Willingness to travel internationally for up to 10% of the time, • An inquisitive attitude with an ability to quickly and deftly research new topics and develop mastery of new subjects, • Excellent written and verbal communication skills; the ideal candidate is not afraid to ask for clarification or give feedbackCompensation and Benefits • equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Salary ranges are subject to change. • Employer-sponsored health, dental and vision insurance, • FSA with employer matching, • 401(k), • Paid holidays, generous PTO, and additional unpaid time off, • Voluntary short-term disability, long-term disability, and life insurance, • Pre-tax commuter benefits

Job Description About You and The Role As a Senior Software Engineer - Hardware Test at Zipline you will have the unique opportunity to develop and deploy high quality software that will power our automated testers for our next-generation of P2 hardware. By developing these tests you will gain a deep understanding of our avionics stack, flight and embedded code, and vehicle-sensors. You will own these test systems from early prototype design all the way to field/production root-cause, driving schedules and deliverables, interfacing with vendors and bridging cross-functional teams with a reliability and safety focus. Most importantly, your work will directly contribute to the design of future vehicles and verification of our next-generation aircraft. You are the last line of defense with our production testers before our vehicles are shipped all over the world to perform vital, life-saving deliveries. What You'll Do • Architect, develop, and deploy test software and test assets that will be used to validate components from avionics boards, sensors, instrumentation, and mechanism assemblies., • Develop automation-centric software scripts to streamline design and production testing., • Develop a deep understanding of components under test becoming a subject matter expert in the component's behavior under a range of environmental, performance, and system conditions., • Coordinate cross-functional teams and external vendors to deploy high quality test systems in a timely manner to support vehicle-builds., • Drive end-to-end test campaigns from development through design validation, certification, and production automation (often working all facets simultaneously)., • Triage and root-cause field failures, using data analysis, test heritage, correlation to operating conditions, and one-off test campaigns., • Develop automation software scripts and visualization tools to streamline design and production testing.What You'll Bring, • 5+ years of programming experience in Python for high volume production applications (manufacturing/EOL software development experience). Some knowledge of embedded C and ability to understand Rust is desired., • Experience with object oriented programming., • Experience building automation systems for use in safety-critical and factory applications., • Experience working with Git / CI and the software development and validation process., • Experience developing software that interfaces directly with hardware including navigating datasheets and validating hands-on with representative hardware., • Experience developing test plans, test requirements, and test criteria for hardware products., • Experience using and deep understanding of common test instrumentation and data acquisition hardware., • Experience solving complex multidisciplinary problems with little supervision on schedule as an individual or as a member of an integrated team. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, ancestry, national origin, religion or religious creed, mental or physical disability, medical condition, genetic information, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity, gender expression, age, marital status, military or veteran status, citizenship, or other characteristics protected by state, federal or local law or our other policies. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Job DescriptionAbout Zipline Zipline is the world's largest and most experienced drone delivery service. We are on a mission to serve all humans equally by ensuring access to food, medicine and essential goods anytime, anywhere. We design, build, and operate the world's largest autonomous logistics system, delivering critical supplies quickly and reliably. Today, Zipline operates on four continents, makes a delivery somewhere in the world every 30 seconds, and has completed millions of deliveries to date, including blood, vaccines, medical supplies, food, and retail products. Our customers include the world's largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible. The drone is only 15% of what we've built to enable seamless, reliable, global operations. Our system strengthens supply chains, reduces congestion, and gives people time back. With more than 140 million commercial autonomous miles safely flown, Zipline is redefining access to healthcare, consumer products, and food across the globe. We operate at a global scale and are looking for practical problem solvers who thrive on real-world challenges and rapid growth. Our team is motivated by building systems that have a direct, meaningful impact on people's lives and by scaling the future of logistics. We are seeking people who sculpt from first principles, enjoy facing adversity, and can do the impossible at record breaking speeds. About the Developer Productivity Team The Developer Productivity team at Zipline empowers our engineers to build safe and reliable software faster. We design and maintain the internal tools, pipelines, and workflows that enable our autonomy, firmware, avionics, and flight software teams to innovate at scale. From improving the performance of our CI/CD system to making code reviews smoother, we create the foundation that lets Zipline engineers focus on building world-class delivery drones. Our work directly impacts the speed, reliability, and safety of the systems that power Zipline's mission to transform logistics and save lives. The Role As a DevOps Engineering Intern, you'll help build the systems and tools that keep our engineering teams moving quickly and safely. You'll work on projects that improve how engineers write, test, and deploy their code—directly impacting the quality and reliability of our autonomous aircraft. Along the way, you'll get exposure to a wide variety of engineering domains at Zipline and collaborate with experienced mentors who are excited to share their expertise. This role is a unique opportunity to learn about developer experience, cloud systems, and drone technology all at once. What You'll Do • Contribute to maintaining and improving our CI/CD pipelines., • Build internal tools (such as dashboards or bots) that make our engineers' lives easier., • Work with experienced engineers to define and deliver features that improve developer workflows., • Help improve the speed and reliability of automated testing and builds., • Participate in real-world debugging, gaining insight into how large engineering systems operate., • Learn how infrastructure investments directly support autonomous aircraft development.What You'll Bring, • Current enrollment in a BS, MS, or PhD program in Computer Science, Electrical Engineering, or a related field., • Strong programming experience in at least one language (Rust, Python, Go, C++, or similar)., • Familiarity with software development tools (bazel, git, CI/CD systems, build tools, etc.)., • A problem-solving mindset, with curiosity to understand how systems work end-to-end., • Strong communication skills and eagerness to collaborate with engineers across disciplines. Candidates are limited to three (3) applications within a 30-day period. The starting cash range for this internship is $40 - 44/ hour. Please note that this is a target, starting cash range for a candidate who meets the minimum qualifications for this role. The final cash pay for this role will depend on a variety of factors, including a specific candidate's experience, qualifications, skills, and working location. The total compensation package for each role may also include: a housing stipend; overtime pay; relocation support; paid sick time; and more. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply! Zipline is also committed to providing reasonable accommodations to individuals with disabilities. Please let your point of contact at Zipline know if you require any accommodations throughout your interview process.

Job DescriptionAbout PykaPyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes. Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce CO2 emissions in their respective industries. What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. Role OverviewPyka is looking for a Mechanical Design Engineer to join our experienced and enthusiastic team of engineers. In this role, you will take ownership over a variety of mechanical components and subsystems on the aircraft and support them from conceptualization through serial production. Our Mechanical Engineering team members work closely with Manufacturing Engineers, Flight Test Engineers, and other Mechanical Engineers to design, test, and iterate on mechanical components and assemblies. This role is not for the faint of heart - the Pyka ME team handles the same amount of hardware as teams 10x the size. You’ll have the opportunity to work with a team that moves extremely quickly with significant opportunities for ownership/contribution, professional development, and growth. Some of the first projects you will work on include:- Improve the design of several existing components for better manufacturability, useability and durability. - Thoroughly validate environmental requirements on aircraft parts, materials and assemblies- Lead the investigation, root causing, solution creation, and solution validation of hardware bugs that come up during field testing. As a Mechanical Engineer at Pyka, you will be central to supporting our existing fleet of aircraft as well as developing the next generation through continuous learning and iteration.Responsibilities • Take on “Design Responsible Engineer” responsibilities for several mechanical design components. You will take these from initial requirement definition, all the way through serial production and support of the product in the field., • Work with Senior Engineers on the conceptual design, prototyping, testing, iteration and documentation of flight critical mechanical parts and assemblies., • Create and maintain 3D CAD, drawings and manufacturing documents with meticulous attention to detail., • Work with manufacturing teams to build tools and processes to facilitate the manufacture of in-house parts and subsystems., • Communicate closely with external suppliers and fabricators to ensure receipt of quality products, on time.Preferred Qualifications, • 1-4+ years of professional experience in mechanical design, • An inquisitive attitude with an ability to quickly and deftly research new topics, and try new things., • Experience designing, performing structural analysis, and supporting the manufacture of composite structures., • Experience designing parts for a wide range of manufacturing processes including 3D printing, CNC machining, injection molding, and sheet metal, • Excellent written and verbal communication skills; the ideal candidate is not afraid to ask for clarification or give feedback., • Experience in any 3D CAD package (Solidworks, NX, Inventor)., • Experience using FEA and hand calculations to validate a wide variety of mechanical design decisions (stress/strain, thermal, fatigue)., • Excitement to be in a prototyping shop building things with your hands., • We understand that candidates bring different strengths and experiences, and you don’t need to meet every qualification to be considered. If this role excites you, we’d love to learn more about you. You may be a great fit even if your background doesn’t align perfectly with the list.Compensation & Benefits, • $101,000 - 121,000 per year base salary + equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Salary ranges are subject to change., • Employer-sponsored health, dental and vision insurance, • FSA with employer matching, • 401(k), • Paid holidays, generous PTO, and additional unpaid time off, • Voluntary short-term disability, long-term disability, and life insurance, • Pre-tax commuter benefits

Job DescriptionAbout PykaPyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes. Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce CO2 emissions in their respective industries. What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. Role OverviewPyka is seeking a talented Supply Planner/Buyer to join our team as we revolutionize autonomous electric aircraft. Your expertise will play a critical role in ensuring that all of Pyka’s teams, from Production through Flight Operations, have the parts, assemblies, and tools that they need in order to build, test, and iterate. You will play a critical role in improving the agility and sustainability of Pyka’s Supply Chain, Logistics, and Manufacturing processes.Responsibilities • Manage the full procurement lifecycle, from timely order placement and payment to ensuring the delivery of critical parts, assemblies, and supplies for all internal teams (R&D, Flight Operations, Manufacturing, Facility, and Software) using established payment accounts., • Act as the primary point of contact for external vendors, fostering strong working relationships and proactively communicating to resolve complex supply chain issues, delivery discrepancies, and quality concerns in partnership with internal stakeholders., • Maintain the integrity and accuracy of the Purchasing and ERP systems by ensuring all critical data, including part costs, shipment details, confirmed arrival/delivery dates, quotes, POs, and invoices, are consistently linked and up-to-date., • Manage & Maintain vendor master data within the ERP, accurately capturing essential information such as lead times, minimum order quantities (MOQs), vendor contacts, certifications, and performance metrics., • Conduct strategic market research and execute regular Request for Quotations (RFQs) to secure competitive pricing and favorable terms for all critical and high-value components and equipment., • Proactively provide clear and regular communication to internal stakeholders (including Production, Engineering, and Finance) on the status of high-priority orders, potential supply chain risks, and cost changes to facilitate effective departmental planning, • Develop, manage, and analyze key Supply Chain and Procurement performance metrics (KPIs), including On-Time Delivery (OTD), cost savings realization, and spend analysis, to drive continuous improvement and strategic decision-making.Required Qualifications, • 2-3 years of experience in Manufacturing/Production, Inventory, or Supply Chain, ideally with a focus on Procurement, • Experience with vendor selection and optimization, • Experience with Enterprise Resource Planning (ERP) systems, including Material Requirements Planning (MRP), • Understanding of eBOMs, mBOMs, and Product Structures, • Extremely high attention to detail, strong multitasking and organizational skills, • Customer oriented with strong presentation skills, • Impeccable communication skills, including speed of responsiveness and ability to clarify and condense complex informationPreferred Qualifications, • Experience in or passion for Aviation, • We understand that candidates bring different strengths and experiences, and you don’t need to meet every qualification to be considered. If this role excites you, we’d love to learn more about you. You may be a great fit even if your background doesn’t align perfectly with the list.Compensation & Benefits, • $79,000-$95,000 per year base salary + equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Salary ranges are subject to change., • Employer-sponsored health, dental and vision insurance, • FSA with employer matching, • 401(k), • Paid holidays, generous PTO, and additional unpaid time off, • Voluntary short-term disability, long-term disability, and life insurance, • Pre-tax commuter benefits

Job DescriptionAbout Zipline Zipline is the world's largest and most experienced drone delivery service. We are on a mission to serve all humans equally by ensuring access to food, medicine and essential goods anytime, anywhere. We design, build, and operate the world's largest autonomous logistics system, delivering critical supplies quickly and reliably. Today, Zipline operates on four continents, makes a delivery somewhere in the world every 30 seconds, and has completed millions of deliveries to date, including blood, vaccines, medical supplies, food, and retail products. Our customers include the world's largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible. The drone is only 15% of what we've built to enable seamless, reliable, global operations. Our system strengthens supply chains, reduces congestion, and gives people time back. With more than 140 million commercial autonomous miles safely flown, Zipline is redefining access to healthcare, consumer products, and food across the globe. We operate at a global scale and are looking for practical problem solvers who thrive on real-world challenges and rapid growth. Our team is motivated by building systems that have a direct, meaningful impact on people's lives and by scaling the future of logistics. We are seeking people who sculpt from first principles, enjoy facing adversity, and can do the impossible at record breaking speeds. About Zipline Do you want to change the world? Zipline is on a mission to transform the way goods move. Our aim is to solve the world's most urgent and complex access challenges by building, manufacturing and operating the first instant delivery and logistics system that serves all humans equally, wherever they are. From powering Rwanda's national blood delivery network and Ghana's COVID-19 vaccine distribution, to providing on-demand home delivery for Walmart, to enabling healthcare providers to bring care directly to U.S. homes, we are transforming the way things move for businesses, governments and consumers. The technology is complex but the idea is simple: a teleportation service that delivers what you need, when you need it. Through our technology that includes robotics and autonomy, we are decarbonizing delivery, decreasing road congestion, and reducing fossil fuel consumption and air pollution, while providing equitable access to billions of people and building a more resilient global supply chain. Join Zipline and help us to make good on our promise to build an equitable and more resilient global supply chain for billions of people. About You and The Role The Senior Electrical Engineer will develop power electronics focused avionics for our next generation aircraft. We are looking for an engineer with a strong foundation in board level design and an excellent grasp of electronics development, processes, and tools. As a Senior Electrical Engineer on the Powertrain team, you will be responsible for architecting and designing electronics including motor inverters, power distribution, battery management, fail-safe / safety, and communication and networking systems. These components are at the core of a new unmanned aerial system that will enable Zipline's impact to expand from 100,000 deliveries a year to 100 million across the globe. In addition, you will have the opportunity to collaborate with world class engineers across all disciplines and experience levels. Zipline values personal development highly and encourages an environment of continuous learning and mentorship. The Powertrain team encounters many challenges when designing robust systems to provide life-saving service in some of the harshest environments on Earth. At the start of any project, our team plays a vital role in system architecture, designing for performance, reliability, and fault tolerance, while balancing mass and cost. Included in this is the design of an FAA-approved safety system to ensure the safety of employees, customers, and bystanders. Our sophisticated flight systems also require us to build custom solutions with high performance embedded computing and high speed serial buses. To achieve Zipline's goal of serving anyone anywhere, all aspects of a design must be successful in a wide range of real-world environments. This means that our team is responsible for designs that are robust to broad ambient temperature ranges, can survive challenging waterproofing/ingress constraints, and maintain immunity to RF and ESD threats. These are just some of the many challenges that make us excited to go to work everyday. What You'll Do • Engineer avionics for volume production through a full design cycle including requirements, prototype, schematic capture, layout, and validation., • Shape the architecture of Zipline's next generation product, making impactful design decisions daily, while working with a high level of independence., • Lead trade studies, understand competing design priorities, and provide direction and clarity for burning down risk., • Proactively seek out opportunities for improvement in system, vehicle, and component level design., • Collaborate cross-functionally in all stages of development, including:, • Architecture: fault tolerance, power, mass, thermals, • Detailed Design: schematic capture, PCB layout, system integration, validation, • Production: quality, failure analysis, manufacturing, cost, • Deployment: troubleshoot field issues, develop rapid mitigations, roll learnings into future design revisions What You'll Bring • A degree in Electrical Engineering, Embedded Hardware Engineering or equivalent practical experience., • Minimum 5 years of design experience including: circuit analysis, schematic capture, PCB layout, packaging, and integration., • Past success developing electronics for critical systems in fields such as aerospace, transportation, or medical devices., • Experience with at least some of these desired:, • Hard-switching power converters, • Resonant power converters, • Motor drives, • Voltage, current, and temperature sensing analog front ends, • Simple digital logic, • Basic embedded communications busses (e.g. SPI, I2C, UART, CAN), • Higher speed communications (e.g. Ethernet, LVDS), • Enthusiasm for working in a fast-paced, collaborative, cross-functional environment., • Clear communication skills and the ability to explain technical challenges to both fellow engineers and non-engineers alike., • Must be eligible to work in the US., • Must be able to work at Zipline's South San Francisco office., • Preferred: experience with practical aspects of carrying a design into mass production. This includes optimizing for cost, manufacturability, and yields. What Else You Need to Know The starting cash range for this role is $160,000 - $225,000. Please note that this is a target, starting cash range for a candidate who meets the minimum qualifications for this role. The final cash pay for this role will depend on a variety of factors, including a specific candidate's experience, qualifications, skills, working location, and projected impact. The total compensation package for this role may also include: equity compensation; discretionary annual or performance bonuses; sales incentives; benefits such as medical, dental and vision insurance; paid time off; and more. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, ancestry, national origin, religion or religious creed, mental or physical disability, medical condition, genetic information, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity, gender expression, age, marital status, military or veteran status, citizenship, or other characteristics protected by state, federal or local law or our other policies. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Job Description Lead Payload Systems Engineer Location: Moriarty, New Mexico Employment Type: Full-Time, On-Site Who Are We: Sceye is a high-growth technology company, building the next generation of instant communications, imaging and remote sensing infrastructure through stratospheric platforms. Our lighter-than-air high-altitude platform systems (LTA HAPS) are capable of maintaining position over an operational area in the stratosphere (altitudes of 18 – 21km). They can carry multiple telecommunications, imaging and remote sensing payloads, providing unique functionality, cost, environmental and societal advantages. Our HAPS be deployed in a matter of days and at a fraction of the cost of traditional infrastructure solutions. This makes them an ideal solution for providing telecommunications connectivity, emergency solutions in the event of natural or other disasters, environmental and infrastructure monitoring, Earth observation and a range of defense applications. Our customers & partners include some of the largest global telecommunications companies, infrastructure operators, climate researchers, civil and defense agencies. At Sceye, we aim high, and we want you to join us at the stratospheric edge of innovation. As part of our mission-driven team, you’ll contribute to building breakthrough technologies that are changing the way we connect and observe the world. We are looking for individuals who bring not only deep expertise but also bold vision and an unwavering commitment to excellence. About the Position: The Lead Payload Systems Engineer will serve as the technical authority and systems/ integration lead for all payload systems onboard our High-Altitude Platform (HAPS). This role is responsible for end-to-end payload lifecycle - from requirements definition and interface design through integration, test, and flight readiness. The ideal candidate combines strong systems engineering fundamentals with hands-on experience in integrating multi-sensor or communications payloads into complex flight systems. Lead Payload Systems Engineer will lead Sceye’s payload operations, overseeing the design, integration, testing, and deployment of mission payloads across multiple programs. You will be responsible for the entire payload lifecycle — from concept and development through flight operations and data delivery. The ideal candidate brings both systems-level thinking and hands-on technical expertise in aerospace payloads, instrumentation, or remote sensing systems. What You’ll Do: • Payload System Ownership, • Lead the technical integration of all payloads (e.g., EO, telecom, hyperspectral, LiDAR, radar, or custom sensor systems) into the flight platform., • Define and maintain the payload-to-platform interface requirements (mechanical, electrical, data, thermal, and RF)., • Ensure payload design meets platform-level performance, safety, and mission requirements., • Integration & Verification, • Develop and execute payload integration, verification, and validation (IV&V) plans for lab, ground, and flight environments., • Coordinate payload integration testing — mechanical fit checks, EMI/EMC, thermal-vacuum, vibration, and functional performance., • Lead troubleshooting, anomaly resolution, and root-cause analysis during integration and flight test campaigns., • Cross-Functional Leadership, • Collaborate closely with Systems Engineering, Avionics, Flight Operations, and Mission Planning teams to ensure seamless payload integration., • Act as primary technical interface with payload vendors, ensuring timely delivery and compliance with interface control documents (ICDs)., • Drive design reviews (PDR, CDR, TRR) for payload subsystems and contribute to platform-level reviews., • Documentation & Compliance, • Own and maintain payload-related documentation: interface control documents (ICDs), configuration management, and test reports., • Ensure payloads meet applicable aerospace standards and regulatory requirements (FCC, FAA, ITAR/EAR, etc.)., • Support creation of flight-readiness documentation and mission assurance reviews., • Innovation & Continuous Improvement, • Identify and implement design and process improvements that enhance payload integration efficiency, reduce mass/power budgets, and increase reliability., • Contribute to system-level architecture studies for future payload capabilities and missions. What We’re Looking For: • Bachelor’s degree in Aerospace Engineering, Systems Engineering, Physics, or related field., • 10+ years of experience in payload systems design, integration, and operations., • Proven track record managing complex payloads with multiple interfaces and stakeholders., • Deep understanding of systems engineering principles, configuration management, and verification processes., • Experience with CAD tools (e.g., SolidWorks, CATIA) and system modeling tools (e.g., DOORS, Cameo, SysML)., • Strong understanding of electrical power systems, data buses (Ethernet, SpaceWire, CAN), and RF architectures., • Proven leadership of complex, multi-disciplinary aerospace or satellite projects., • Strong understanding of EO/IR sensors, data processing, and communication payloads., • Experience with systems engineering, verification & validation, and flight operations., • Excellent communication, organizational, and leadership skills. Preferred: • Master’s degree or higher in a relevant engineering or scientific discipline., • Experience with HAPS, LEO satellites, UAVs, or high-altitude systems., • Knowledge of FAA and NASA payload integration standards. What We Offer: At Sceye, we’re building more than high-altitude platforms—we’re building a workplace where people (and their pups) thrive. Here’s what you’ll enjoy: • Chef-Prepared Lunches – Fresh, onsite meals to keep you fueled and focused., • Snacks & Refreshments – Enjoy a variety of snacks and drinks available throughout the day., • Wellness Perks – Access to a gym, pickleball court, and an outdoor dog kennel., • Dog-Friendly Environment – Bring your four-legged friends to work and enjoy a pet-welcoming space., • Comprehensive Health Coverage – Medical, dental, vision, and disability insurance, with over 82% of premiums covered—and 100% for everything else., • 401(k) with Match – Company contributions that are yours from day one., • High-Performance Culture – Join a collaborative, inclusive environment where your work helps shape the future of aerospace. Equal Opportunity Employer: Sceye is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, gender identity or expression, age, disability, veteran status, or any other legally protected status. We encourage individuals from all backgrounds to apply, especially those who bring unique perspectives and experiences that can help us grow and innovate. If you require reasonable accommodation during the application or interview process, please contact us—we’re happy to assist.

Job Description Lead Thermal Engineer Status: Exempt, Full Time Location: Moriarty, NM or North Bay, CA Who Are We: Sceye is a high-growth technology company, building the next generation of instant communications, imaging and remote sensing infrastructure through stratospheric platforms. Our lighter-than-air high-altitude platform systems (LTA HAPS) are capable of maintaining position over an operational area in the stratosphere (altitudes of 18 – 21km). They can carry multiple telecommunications, imaging and remote sensing payloads, providing unique functionality, cost, environmental and societal advantages. Our HAPS be deployed in a matter of days and at a fraction of the cost of traditional infrastructure solutions. This makes them an ideal solution for providing telecommunications connectivity, emergency solutions in the event of natural or other disasters, environmental and infrastructure monitoring, Earth observation and a range of defense applications. Our customers & partners include some of the largest global telecommunications companies, infrastructure operators, climate researchers, civil and defense agencies. At Sceye, we aim high, and we want you to join us at the stratospheric edge of innovation. As part of our mission-driven team, you’ll contribute to building breakthrough technologies that are changing the way we connect and observe the world. We are looking for individuals who bring not only deep expertise but also bold vision and an unwavering commitment to excellence. About the Position: Sceye is seeking a Lead Thermal Engineer with proven, hands-on experience supporting the design, analysis, and validation of thermal systems for high-altitude aerospace platforms, including HAPS, unmanned aerial systems (UAS), drones, or closely related flight vehicles. This role is responsible for ensuring reliable thermal performance of avionics, structures, propulsion-adjacent systems, and payloads operating in extreme stratospheric environments. The Lead Thermal Engineer will serve as a trusted technical advisor and will be relied upon for sound judgment and guidance on thermal management strategies that directly influence system design, risk mitigation, and mission readiness. This role requires someone who has successfully applied thermal engineering expertise in prior industry roles and is comfortable owning thermal decisions. What We’re Looking For: • Design, analyze, and optimize active and passive thermal control systems for high-altitude aerospace platforms, • Perform steady-state and transient thermal analyses using analytical and numerical methods, • Develop, validate, and maintain thermal models predicting system behavior across stratospheric and mission-specific operating conditions, • Support selection, qualification, and trade studies for materials, insulation, coatings, radiators, and thermal interfaces, • Define thermal requirements, margins, and operating limits for avionics, batteries, payloads, and structural components, • Support environmental testing, including thermal vacuum, altitude simulation, and temperature cycling tests, • Analyze test data, correlate results with thermal models, and drive design updates as needed, • Collaborate with mechanical, electrical, systems, and manufacturing teams to resolve real-world thermal challenges, • Document designs, analyses, test results, and compliance with applicable engineering standards, • Support design reviews, risk assessments, and continuous improvement initiatives Required Qualifications: • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or a closely related field, • 5–10 years of demonstrated, hands-on experience in thermal analysis and thermal system design for aerospace or high-altitude flight systems, • Proven practical experience supporting thermal management for drones, HAPS, UAS, or closely related aerospace platforms, • Demonstrated ability to independently own thermal analyses and provide clear, experience-based recommendations to engineering leadership and cross-functional teams, • Strong, applied understanding of heat transfer principles (conduction, convection, radiation), particularly in low-density, high-altitude environments, • Experience developing, validating, and correlating thermal models using industry-standard tools (e.g., ANSYS, Thermal Desktop, COMSOL, or equivalent), • Experience supporting hardware through design, test, integration, and operational readiness, not solely academic or theoretical work, • Ability to operate effectively in a fast-paced, R&D-driven aerospace environment, • Strong analytical, problem-solving, and technical documentation skills Preferred Qualifications: • Master’s degree in Mechanical or Aerospace Engineering, • Direct experience with high-altitude platforms, stratospheric vehicles, or long-duration unmanned flight systems, • Hands-on experience with thermal vacuum testing, environmental qualification, or flight validation campaigns, • Knowledge of lightweight structures, composites, and advanced aerospace materials, • Experience supporting mission-critical or flight-certified hardware What We Offer: At Sceye, we’re building more than high-altitude platforms—we’re building a workplace where people (and their pups) thrive. Here’s what you’ll enjoy: • Chef-Prepared Lunches – Fresh, onsite meals to keep you fueled and focused., • Snacks & Refreshments – Enjoy a variety of snacks and drinks available throughout the day., • Wellness Perks – Access to a gym, pickleball court, and an outdoor dog kennel., • Dog-Friendly Environment – Bring your four-legged friends to work and enjoy a pet-welcoming space., • Comprehensive Health Coverage – Medical, dental, vision, and disability insurance, with over 82% of premiums covered—and 100% for everything else., • 401(k) with Match – Company contributions that are yours from day one., • High-Performance Culture – Join a collaborative, inclusive environment where your work helps shape the future of aerospace. Equal Opportunity Employer: Sceye is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, gender identity or expression, age, disability, veteran status, or any other legally protected status. We encourage individuals from all backgrounds to apply, especially those who bring unique perspectives and experiences that can help us grow and innovate. If you require reasonable accommodation during the application or interview process, please contact us—we’re happy to assist.

Job DescriptionAbout You and The Role The Senior Electrical Engineer will develop power electronics focused avionics for our next generation aircraft. We are looking for an engineer with a strong foundation in board level design and an excellent grasp of electronics development, processes, and tools. As a Senior Electrical Engineer on the Powertrain team, you will be responsible for architecting and designing electronics including motor inverters, power distribution, battery management, fail-safe / safety, and communication and networking systems. These components are at the core of a new unmanned aerial system that will enable Zipline's impact to expand from 100,000 deliveries a year to 100 million across the globe. In addition, you will have the opportunity to collaborate with world class engineers across all disciplines and experience levels. Zipline values personal development highly and encourages an environment of continuous learning and mentorship. The Powertrain team encounters many challenges when designing robust systems to provide life-saving service in some of the harshest environments on Earth. At the start of any project, our team plays a vital role in system architecture, designing for performance, reliability, and fault tolerance, while balancing mass and cost. Included in this is the design of an FAA-approved safety system to ensure the safety of employees, customers, and bystanders. Our sophisticated flight systems also require us to build custom solutions with high performance embedded computing and high speed serial buses. To achieve Zipline's goal of serving anyone anywhere, all aspects of a design must be successful in a wide range of real-world environments. This means that our team is responsible for designs that are robust to broad ambient temperature ranges, can survive challenging waterproofing/ingress constraints, and maintain immunity to RF and ESD threats. These are just some of the many challenges that make us excited to go to work everyday. What You'll Do • Engineer avionics for volume production through a full design cycle including requirements, prototype, schematic capture, layout, and validation., • Shape the architecture of Zipline's next generation product, making impactful design decisions daily, while working with a high level of independence., • Lead trade studies, understand competing design priorities, and provide direction and clarity for burning down risk., • Proactively seek out opportunities for improvement in system, vehicle, and component level design., • Collaborate cross-functionally in all stages of development, including:, • Architecture: fault tolerance, power, mass, thermals, • Detailed Design: schematic capture, PCB layout, system integration, validation, • Production: quality, failure analysis, manufacturing, cost, • Deployment: troubleshoot field issues, develop rapid mitigations, roll learnings into future design revisions What You'll Bring • A degree in Electrical Engineering, Embedded Hardware Engineering or equivalent practical experience., • Minimum 5 years of design experience including: circuit analysis, schematic capture, PCB layout, packaging, and integration., • Past success developing electronics for critical systems in fields such as aerospace, transportation, or medical devices., • Experience with at least some of these desired:, • Hard-switching power converters, • Resonant power converters, • Motor drives, • Voltage, current, and temperature sensing analog front ends, • Simple digital logic, • Basic embedded communications busses (e.g. SPI, I2C, UART, CAN), • Higher speed communications (e.g. Ethernet, LVDS), • Enthusiasm for working in a fast-paced, collaborative, cross-functional environment., • Clear communication skills and the ability to explain technical challenges to both fellow engineers and non-engineers alike., • Must be eligible to work in the US., • Must be able to work at Zipline's South San Francisco office., • Experience with at least some of these desired:, • Hard-switching power converters, • Resonant power converters, • Motor drives, • Voltage, current, and temperature sensing analog front ends, • Simple digital logic, • Basic embedded communications busses (e.g. SPI, I2C, UART, CAN), • Higher speed communications (e.g. Ethernet, LVDS) What Else You Need to Know The starting cash range for this role is $150,000 - $215,000. Please note that this is a target, starting cash range for a candidate who meets the minimum qualifications for this role. The final cash pay for this role will depend on a variety of factors, including a specific candidate's experience, qualifications, skills, working location, and projected impact. The total compensation package for this role may also include: equity compensation; discretionary annual or performance bonuses; sales incentives; benefits such as medical, dental and vision insurance; paid time off; and more. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, ancestry, national origin, religion or religious creed, mental or physical disability, medical condition, genetic information, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity, gender expression, age, marital status, military or veteran status, citizenship, or other characteristics protected by state, federal or local law or our other policies. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Job DescriptionAbout You and The Role The Senior Electrical Engineer will develop avionics for our next-generation aircraft. We are looking for an engineer with a strong foundation in circuit board design and an excellent grasp of electronics development, processes, and tools. As a Senior Electrical Engineer on the Avionics team, you will be responsible for designing electronics including flight computers, communication systems, safety systems, and more. These components are at the core of a new unmanned aerial system that will enable Zipline's impact to expand from 100,000 deliveries/year to 100 million across the globe. In addition, you will have the opportunity to collaborate with world class engineers across all disciplines and experience levels. Zipline values personal development highly and encourages an environment of continuous learning and mentorship. The Avionics team encounters many challenges when designing robust avionics systems to provide life-saving service in some of the harshest environments on Earth. At the start of any project, our team plays a vital role in system architecture, designing for performance, reliability, and fault tolerance, while balancing mass and cost. Included in this is the design of an FAA-approved safety system to ensure the safety of employees, customers, and bystanders. Our sophisticated flight systems also require us to build custom solutions with high performance embedded computing and high speed serial buses. To achieve Zipline's goal of serving anyone anywhere, all aspects of a design must also be successful in a wide range of real-world environments by being robust against environmental, ESD, and EMI threats. These are just some of the many challenges that make us excited to go to work everyday. What You'll Do • Engineer avionics for volume production through a full design cycle including requirements, prototype, schematic capture, layout, and validation, with a focus on compute, sensing, and perception., • Shape the architecture of Zipline's next generation product, making impactful design decisions daily, while working with a high level of independence., • Lead trade studies, understand competing design priorities, develop hardware requirements to meet system level requirements and provide direction and clarity for burning down risk., • Proactively seek out opportunities for improvement in system, vehicle, and component level design., • Collaborate cross-functionally in all stages of development, including:, • Architecture: fault tolerance, power, mass, thermals, perception performance, • Detailed Design: schematic capture, PCB layout, system integration, validation, • A degree in Electrical Engineering, Embedded Hardware Engineering or equivalent practical experience., • Minimum 6 years of design experience including: circuit design, schematic capture, PCB layout, packaging, integration, cost reduction, sourcing and transitioning a product to production., • Past success developing electronics for critical systems in fields such as aerospace, transportation, or medical devices., • Design experience with mixed-signal, high-speed digital, SoM compute integration, high-speed serial busses, and electro-magnetic compatibility., • Experience working with any of DDR, CSI, PCIe, SPI, UART, USB is a preferred qualification., • Experience working with WiFi, Cell, GNSS, ADS-B, Cameras, Microphones is a preferred qualification., • Experience with electronics design of high volume consumer electronics products including mobile devices, laptops, and automotive is a preferred qualification. Experience working on fail safe and fail operational electronics including aerospace and medical is a preferred qualification., • Enthusiasm for working in a fast-paced, collaborative, cross-functional environment., • Clear communication skills and the ability to explain technical challenges to both fellow engineers and non-engineers alike., • Must be eligible to work in the US. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, ancestry, national origin, religion or religious creed, mental or physical disability, medical condition, genetic information, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity, gender expression, age, marital status, military or veteran status, citizenship, or other characteristics protected by state, federal or local law or our other policies. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Job DescriptionAbout PykaPyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes. Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce CO2 emissions in their respective industries. What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. Role OverviewPyka is looking for a Senior Software Engineer with a strong aesthetic sense and a passion for crafting seamless human-machine interfaces. In this role, you’ll take full ownership of our “Plane View” application — a real-time Qt/QML-based interface that plays a central role in our aircraft operations.This project has evolved through team-wide contributions, and now it’s ready for a dedicated leader. You’ll bring structure, consistency, and technical depth to the application — transforming it into a reliable, elegant, and intuitive experience. If you've built UIs for complex systems like vehicles, medical devices, or robotics, you already know the challenges (and rewards) of designing interfaces people depend on in real-world environments.Responsibilities • Take full ownership of Plane View, our core Qt/QML application and other human-machine interfaces in our codebase, • Define and uphold interface standards, visual consistency, and usability across our user interfaces, • Design and implement intuitive, high-performance user interfaces for real-time systems, • Collaborate with a multidisciplinary engineering team; guide interface architecture and improvements, • Serve as the go-to UI/UX expert for the team and a key voice in product usability discussionsPreferred Qualifications, • 5+ years of experience in software engineering with a UI/UX focus, • Strong experience with Qt (bonus points for QML), • Experience with modern (C++11 and beyond) C++ coding, • A background in building human-machine interfaces — automotive, aerospace, medical devices, or similar, • A keen eye for design and user experience — you care deeply about how software looks and feels, • Able to work independently and take full ownership of complex projects, • Experience with JavaScript is a plus, but Qt/QML proficiency is key, • We understand that candidates bring different strengths and experiences, and you don’t need to meet every qualification to be considered. If this role excites you, we’d love to learn more about you. You may be a great fit even if your background doesn’t align perfectly with the list.Compensation & Benefits, • 165,000-196,000 per year base salary + equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Salary ranges are subject to change., • Employer-sponsored health, dental and vision insurance, • FSA with employer matching, • 401(k), • Paid holidays, generous PTO, and additional unpaid time off, • Voluntary short-term disability, long-term disability, and life insurance, • Pre-tax commuter benefits

Job DescriptionAbout PykaPyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes. Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce CO2 emissions in their respective industries. What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. Role Overview Pyka is looking for a highly skilled Electro-Mechanical Assembly Technician to support the fabrication and integration of complex electrical and mechanical subsystems for its autonomous aircraft systems. This role involves hands-on harness assembly, subsystem builds, and electronic testing, all executed to the highest standards of quality and precision.The Senior Electro-Mechanical Assembly Technician plays a critical role in ensuring the successful build, validation, and production readiness of Pyka’s electromechanical subsystems. This role bridges hands-on assembly work, quality assurance, and close collaboration with engineering teams to transition hardware from prototype to scalable production.Responsibilities • Perform and establish incoming quality checks on production material, • Work with design engineers on first articles and help move subassembly to production, • Assemble electrical/mechanical subsystems following work instructions, • Perform quality checks on assemblies as they go through the production process, • Subassembly inventory tracking and procurement, • Build wire harnesses and test setups based on understandings of Pyka’s systems, • Write and update work instructions in our MES, • Help to solve bugs and quality issues during assembly, • Maintain the production space and keep equipment operational and orderly, • Be comfortable and safe working with batteries, high voltage, and spinning motorsRequired Qualifications, • 4-10+ years of experience with electrical/mechanical assemblies and building wiring harnesses based on schematics and work instructions, • Experience with MES, PLM, and ERP, • Experience writing and modifying work instructions, • High voltage safety knowledge and comfortable working on 120 VDC, 20 ~ 30 kW systems., • Ability to follow instructions, both written and verbal, to carefully assemble electronic subsystems containing a variety of electrical and mechanical components, • Experience inspecting and ensuring quality of electrical subsystems, • Excellent written and verbal communication skills. The ideal candidate is not afraid to ask for clarification or give feedback, • Detail oriented documentation skills (writing procedures/ documenting test results), • We understand that candidates bring different strengths and experiences, and you don’t need to meet every qualification to be considered. If this role excites you, we’d love to learn more about you. You may be a great fit even if your background doesn’t align perfectly with the list.Compensation & Benefits, • $40-45/hr + equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Salary ranges are subject to change., • Employer-sponsored health, dental and vision insurance, • FSA with employer matching, • 401(k), • Paid holidays, generous PTO, and additional unpaid time off, • Voluntary short-term disability, long-term disability, and life insurance, • Pre-tax commuter benefits

Job DescriptionAbout You and The Role As a Senior RF Desense Engineer on the Avionics team, you will be responsible for architecting, testing, debugging, fixing RF Desense challenges from the PCBA level to the full Aircraft level. You will work with mechanical, electrical, and integration engineers to ensure compliance across all systems. This competency is at the core of a new unmanned aerial system that will enable Zipline's impact to expand from 100,000 deliveries/year to 100 million across the globe. In addition, you will have the opportunity to collaborate with world class engineers across all disciplines and experience levels. Zipline values personal development highly and encourages an environment of continuous learning and mentorship. The Avionics team encounters many challenges when designing robust avionics systems to provide life-saving service in some of the harshest environments on Earth. At the start of any project, our team plays a vital role in system architecture, designing for performance, reliability, and fault tolerance, while balancing mass and cost. Included in this is the design of an FAA-approved safety system to ensure the safety of employees, customers, and bystanders. To achieve Zipline's goal of serving anyone anywhere, all aspects of a design must also be successful in a wide range of real-world environments by being robust against radiated emissions and conducted emissions. What You'll Do • Develop and execute RF Desense test plans from PCB level to integrated aircraft level., • Identify and document ECU level susceptibilities to electromagnetic environments, transients, radiated and conducted emissions., • Analyze 2D/3D electromagnetic phenomena using CST, HFSS, ADS, other EM simulation tools, and in-house developed data analysis tools in order to develop an understanding of our products., • Desense mitigation implementation through all avenues, including but not limited to modeling, measurements, testing, software updates, layout changes, BOM, changes, assembly changes., • Specify, procure, and maintain lab equipment related to RF Desense testing., • Perform Antenna and Active components colocation planning and optimization at product integration level and PCB level., • Promote best practices across various electrical and mechanical design teams., • Clearly communicate technical challenges and trade-offs to both fellow engineers and non-engineers, both written and verbally. Assist in recruiting, interviewing, and hiring additional teammates to our rapidly-growing team.What You'll Bring, • A degree in Electrical Engineering, Embedded Hardware Engineering or equivalent, and at least 5 years of practical experience in an RF Desense role or related field., • This position requires a thorough understanding of design for Desense philosophy to push the bounds for what is possible in the space and involves a blend of design consultation, simulation, hands-on testing, and regulatory compliance management ., • Collaborate with electrical design teams in all phases of product design, from the concept and architecture definition, schematic and layout, cable design and routing, product packaging, validation testing, and introduction into production., • Experience with signal integrity, PDN and emissions problems., • Experience with product desense risk profiling, clock tree planning, desense test plan, measurements and remediation based on aggressor and victim matrix on a multi radio system., • Experience with 2D/3D electromagnetic phenomena using CST, HFSS, ADS, other EM simulation tools., • Experience with system level coexistence debugging and improvements, and proficiency on test and measurement tools (Oscilloscope, Logic Analyzer, spectrum analyzer)., • Experience with Python or other scripting languages for test automation and data analysis., • Must be able to work at Zipline's South San Francisco office.Additional Skills, • Experience automating lab measurements using Python or other scripting languages, • Knowledge of antennas and electromagnetic propagation, • Ability to read and interpret PCB schematic and layout, electrical interface drawings, and mechanical CAD documentsWhat Else You Need to Know The starting cash range for this role is $160,000 - $210,000. Please note that this is a target, starting cash range for a candidate who meets the minimum qualifications for this role. The final cash pay for this role will depend on a variety of factors, including a specific candidate's experience, qualifications, skills, working location, and projected impact. The total compensation package for this role may also include: equity compensation; discretionary annual or performance bonuses; sales incentives; benefits such as medical, dental and vision insurance; paid time off; and more. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, ancestry, national origin, religion or religious creed, mental or physical disability, medical condition, genetic information, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity, gender expression, age, marital status, military or veteran status, citizenship, or other characteristics protected by state, federal or local law or our other policies.We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Job DescriptionAbout PykaPyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes. Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce CO2 emissions in their respective industries. What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. Role OverviewPyka is looking for a highly skilled Senior Mechanical Engineer to join our cargo aircraft team. In this role, you will lead the mechanical design and integration of key aircraft components. Your work will span from detailed CAD design to structural analysis, prototyping, and testing — all while collaborating closely with cross-functional engineering teams.Responsibilities • Design mechanical components and assemblies with consideration for aircraft environments and performance., • Perform basic structural and stress analysis (hand calculations and FEA) to validate designs., • Apply GD&T and appropriate tolerancing to ensure manufacturability and proper assembly., • Generate detailed 3D CAD models and engineering drawings (SolidWorks preferred)., • Support structural integration of components into composite and metallic airframe structures., • Design basic tooling and fixtures to support prototyping and testing., • Lead hands-on prototyping, assembly, and testing of mechanical systems., • Collaborate with aeromechanical, propulsion, electrical, and manufacturing teams to ensure robust requirement definition and collaboration across systems., • Contribute to design reviews and mentor junior engineers as needed.Qualifications, • Bachelor’s or Master’s degree in Mechanical or Aerospace Engineering., • 5+ years of mechanical design experience, preferably in aerospace or high-performance vehicle environments., • Strong CAD skills (SolidWorks highly preferred), including modeling of complex assemblies., • Solid understanding of structural design principles and material properties., • Experience with basic stress analysis, both analytical (hand calcs) and FEA (e.g., SolidWorks Simulation, ANSYS)., • Practical knowledge of tolerancing, fits, and GD&T., • Experience with component integration into airframes or structural assemblies., • Comfortable with hands-on prototyping, fabrication, and testing., • Effective communicator and team collaborator with a proactive, problem-solving mindset.Preferred Qualifications, • Experience working with composite materials and bonded structures., • Familiarity with aviation industry standards and certification practices., • Prior experience designing for lightweight, high-strength applications., • Experience designing tooling or fixtures for small-scale production or testing environments., • We understand that candidates bring different strengths and experiences, and you don’t need to meet every qualification to be considered. If this role excites you, we’d love to learn more about you. You may be a great fit even if your background doesn’t align perfectly with the list.Company Perks, • $135,000 - 160,000 per year base salary + equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Salary ranges are subject to change., • Equity, • Employer-sponsored health, dental and vision insurance, • FSA with employer matching, • 401(k), • Paid holidays, generous PTO, and additional unpaid time off, • Voluntary short-term disability, long-term disability, and life insurance, • Pre-tax commuter benefits

Job Description About This Posting This posting represents multiple Mechanical Design Engineering opportunities across our Engineering organization. We're hiring across several teams (Avionics, Structures & Mechanisms, Powertrain & Battery, Ground Systems, and more) and across multiple seniority levels. Candidates who apply will be considered for all open roles that align with their background. During your first conversation, we will work with you to identify the best team and level match, based on your experience and interests. About You and the Work Does working on large integrated electro-mechanical systems from conception through fully scaled production and world-wide deployment excite you? At Zipline, our work is intended for the field. Patients are counting on it today and there is no time for aiming low or coming up short. If leveraging your talent to drive creating elegantly engineered solutions excites you, read on. We're looking for driven, proactive Mechanical Design Engineers to join various hardware teams across the organization. Mechanical Design engineers are responsible for coming up with novel designs that not only meet their intended function, but are also robust enough to handle the severe environments our aircraft are exposed to on an everyday basis. This person will be the complete owner for their hardware, hands-on in moving projects forward through each phase of the product design process (Design, Build, Test, Repeat, Scale) to produce high-impact products and manage projects on short timelines. Additionally, design engineers are responsible for overseeing their designs into production, ensuring designs meet their design requirements, are manufacturable, inspectable, and can be built at scale. Our Mechanical Engineers know their hardware inside and out and work seamlessly with Software, Integration, Production, Suppliers, and Test to make sure their hardware is functioning effectively as a part of the whole system. Must Have Experience / Skill Sets • 3-12+ years of full time working experience, at a business, designing electromechanical and structural assemblies, • Proven track record of complex subassemblies or full systems over at least two product programs, • Demonstrated CAD fluency for system-level ownership (3D/2D of 20–30 parts simultaneously), • Experience working with suppliers and seeking DFM feedback, • Experience working on structural components and mechanisms, identifying worst-case loads, creating quick test setups, • Demonstrated core competencies: GD&T, FEA (multi-body structural and thermal), design for assembly and field ops, • Prototyping experience and quick iterations on owned projects, • Ability to bound problems with hand calcs (beam, buckling, bolted joints, etc.), • Knowledge of appropriate safety margins for human safety critical applications, • Excellent written, verbal, and visual communication skills Additional Role-Specific Skills by Team Avionics • Experience with high-volume electromechanical assemblies, including PCBA layouts and sensor hardware including cameras, air data sensors, etc., • First principles thermal design Battery and Power Distribution • Experience with high-volume electromechanical assemblies, including PCBA enclosures, batteries, and connectors, • First principles thermal design Propulsion • Experience with rotor dynamics, vibrational loads, durability cycling, • Familiarity with electric motors, electromagnetics, and brushless DC motor control, • Bonus: carbon fiber structures in high-volume production Structures and Mechanisms (Aircraft) • Design of mass-efficient carbon fiber, metallic, and plastic structures, • Design and testing of reliable servo mechanisms Towers • Welding design (AWS 1.1), sheet metal design, electrical integration, • Structural design including hand calcs and FEA, • Bonus: large structural steel, dynamic transient FEA Dock and Zipping Point • Experience with design for electronics packaging/harnessing, actuators, mechanisms, • Sheet metal and plastic design Nice to Haves • NX as your primary CAD tool, • Aerospace or automotive-level validation experience, • Comfortable with data analysis, • Prior technical mentorship, • Testing experience (test plans, execution, analysis) Interview Process This posting represents multiple opportunities and levels, our process is structured to help us place you on the right team while giving you clear visibility into what to expect. Step 1: Recruiter Call A short call to understand your background, career goals, and technical focus areas. We'll use this to assess overall fit for Zipline's mechanical roles and begin role matching across our teams. Step 2: Hiring Manager + Technical Interviews These are two separate interviews that we will schedule in-tandem. You will meet a hiring manager and also complete a technical conversation focused on mechanical fundamentals, problem solving, and your past work. Step 3: Onsite Panel A full onsite interview where you meet several team members, deep dive into your design work, walk through technical challenges, and see the environment where our systems are built and tested. We have a strong preference to conduct your onsite interview in one day, but will be flexible on a case-by-case basis What Else You Need to Know The starting cash range for this role is $145,000 – $225,000. Please note that these are starting salary ranges that represent multiple internal levels. The final cash pay will depend on experience, qualifications, skills, location, and projected impact. Total compensation will also include equity, incentives, and benefits such as medical, dental, vision, paid time off, and more. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities. We value diversity at Zipline and welcome applications from those traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply. If you'd like to learn more about Zipline and our teams, feel free to check out our Instagram, one of our Reddit AMAs, or our website.

Job DescriptionAbout the Electrical Engineering Team At Zipline, the Electrical Engineering Teams are at the heart of our flight and ground systems, responsible for designing, building, and testing all the electronics and software that goes into a scaled instant logistics system. From custom circuit board design, EOL tester development, and sensor integration to real-time flight control and communication systems, the team ensures our platforms operate safely and effectively in some of the most challenging environments in the world. The team works cross-functionally with mechanical, test, embedded, software, and systems engineering teams to create scalable, high-performance products that power life-saving missions every day. The Role Leading the way in drone delivery often means exceeding the capabilities of what's available off the shelf, and as a result we are engineering the majority of our system in-house. Doubling down on the reliability of our systems is critical to delivering to our next billion customers--people whose lives will be meaningfully affected by smarter, more equitable access. We are deliberately expanding our electrical design and test capabilities and adding to the ranks of our experienced team to achieve these goals. We need dedicated engineers to burn down risk and improve reliability in our system like their life depends on it, because others' lives do. Electronics are where software meets the physical world, and so our electrical engineering team has a wide array of engineering skills and works with a variety of different teams. We need people who are comfortable working in different domains, thrive when working on a problem as part of a small group, and are able to communicate technical concepts clearly to a wide variety of stakeholders--software and mechanical engineers, hardware test and manufacturing, and operations and field support, to name a few. Our small team can get a lot done because our team members are strong individual contributors with a good grasp of electrical engineering fundamentals and the ability to define requirements for their systems, rapidly develop creative and simple solutions, and prove with testing that their work meets the rigors and edge-cases of real-world deployment. What You'll Do You'll have your own projects but we haven't been saving an "intern project" - you'll be a full member of our team, and like with our other engineers, we'll work with you to find projects that align with your goals and interests and the team's and company's priorities. Examples of previous projects for interns include: • Prototyping new versions of our battery charging electronics to meet harsher environmental requirements in new countries where we're launching our service, • Architecting ground support electronics to assist the air vehicle with take-off and landing, • Developing and deploying test equipment such as EOL's for design validation and production, • Supporting design validation campaigns to ensure that our avionics products meet design and reliability requirements, • Root cause investigation for our products from test, flight, or field issues.What You'll Bring, • Must have at least completed the second year of your Undergraduate studies. Masters and PhD students are also eligible., • You've designed and tested a custom circuit board (it doesn't need to have worked - we'd love to hear about it!), • You've worked on a project in or out of school that moved under its own power (plane, car, boat, quadcopter, rocket, balloon, rocket on a balloon, submarine, rover, etc. - we're not picky), • You've collaborated on the above two things as part of a group - school club, competition team, as part of a job/internship, or just with friends, • Experience in Robotics/Automation: Prior exposure to robotics systems, automation, or sensor data (through coursework, projects, or clubs) is a plus., • Software Development: Exposure to object-oriented programming (e.g., C++ or Java) is a bonus. Candidates are limited to three (3) applications within a 30-day period. The starting cash range for this internship is $38 - 42/ hour. Please note that this is a target, starting cash range for a candidate who meets the minimum qualifications for this role. The final cash pay for this role will depend on a variety of factors, including a specific candidate's experience, qualifications, skills, and working location. The total compensation package for each role may also include: a housing stipend; overtime pay; relocation support; paid sick time; and more. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply! Zipline is also committed to providing reasonable accommodations to individuals with disabilities. Please let your point of contact at Zipline know if you require any accommodations throughout your interview process.

Job DescriptionHelicopter Senior A&P MechanicLocation: Redding, CASign On Bonus: $35,000 - this won't last long - Apply Today!Shift: 7 Days on 7 Days off Join our client, a leading air ambulance provider in the United States, as a Senior A&P Mechanic. This is an exciting chance for you to leverage your expertise in aircraft maintenance and play a pivotal role in life-saving missions. Our client is renowned for their unmatched safety record and state-of-the-art fleet, providing critical air medical transport services. As a Senior A&P Mechanic, your contributions will ensure that their aircraft are always ready to respond reliably and swiftly during emergencies. Responsibilities: * Review daily maintenance and inspection tasks to ensure aircraft airworthiness. * Notify the Lead Mechanic of any issues requiring schedule adjustments or additional support. * Oversee maintenance operations at field bases, including inventory and spare parts management. * Prepare and certify maintenance documentation to meet FAA, manufacturer, and company standards. * Manage and update data entries in RAMCO, maintaining communication with team members for timely task completion. * Maintain inventory levels, recommend adjustments, and ensure company tools are properly calibrated. * Perform other related duties as assigned. Requirements: * High school diploma required. * FAA Mechanic Certificate with both Airframe and Powerplant ratings. * Minimum of 2 years in helicopter maintenance as a certified mechanic (Bell or Eurocopter exp preferred). * Basic communication and computer skills. * Ability to pass pre-placement exams (physical, drug screening, background check). * For Roving Maintenance Team: proficiency in sheet metal repair and/or avionics troubleshooting and repair. * Willingness to travel frequently, sometimes on short notice, and work night shifts as needed. Benefits & Perks: * Competitive pay: $30.57 – $37.62/hour (approx. $73,123 – $89,987 annually). * Sign-on bonus up to $35,000, plus shift, safety, and annual employee bonuses. * Comprehensive benefits package supporting health, wellness, and career growth. * 7 & 7 schedule promoting work-life balance with required travel between bases. Why Apply Through Total Aviation Staffing? Total Aviation Staffing connects aviation professionals with top-tier opportunities across the industry. Whether you’re looking for roles in: * Commercial Aviation – Passenger airlines, cargo operations, and aircraft leasing * Business & General Aviation – Corporate jets, charter services, and private aviation * MRO & Aftermarket Services – Aircraft maintenance, repair, overhaul, and parts distribution * Aerospace & Defense – Military aviation, space systems, and defense programs * Aviation Technology & Manufacturing – OEMs, avionics, propulsion, and emerging technologies Even if this role isn’t the perfect fit, applying with us gives you access to multiple career opportunities that may not be publicly advertised. * Work with top companies in aviation and aerospace. * Get priority access to multiple job openings. * Receive expert career guidance from specialized aviation recruiters. Apply today to take the next step in your aviation career.

Job Description Who Are We: Sceye is a high-growth technology company, building the next generation of instant communications, imaging and remote sensing infrastructure through stratospheric platforms. Our lighter-than-air high-altitude platform systems (LTA HAPS) are capable of maintaining position over an operational area in the stratosphere (altitudes of 18 – 21km). They can carry multiple telecommunications, imaging and remote sensing payloads, providing unique functionality, cost, environmental and societal advantages. Our HAPS be deployed in a matter of days and at a fraction of the cost of traditional infrastructure solutions. This makes them an ideal solution for providing telecommunications connectivity, emergency solutions in the event of natural or other disasters, environmental and infrastructure monitoring, Earth observation and a range of defense applications. Our customers & partners include some of the largest global telecommunications companies, infrastructure operators, climate researchers, civil and defense agencies. At Sceye, we aim high, and we want you to join us at the stratospheric edge of innovation. As part of our mission-driven team, you’ll contribute to building breakthrough technologies that are changing the way we connect and observe the world. We are looking for individuals who bring not only deep expertise but also bold vision and an unwavering commitment to excellence. About the Position: Sceye is seeking an experienced RF Engineer to design, develop, test, and support radio frequency (RF) systems critical to our stratospheric aerospace platform. This role will focus on communication systems, antennas, RF payload integration, and system-level performance to ensure reliable, high-quality connectivity in near-space environments. The ideal candidate brings strong hands-on RF design experience, a systems-thinking mindset, and the ability to collaborate across multidisciplinary engineering teams. What We’re Looking For: Key Responsibilities • Design, analyze, and optimize RF systems including transmitters, receivers, antennas, and RF front-end components, • Develop RF architectures for airborne/stratospheric communication platforms, • Perform RF modeling, simulation, and link budget analysis, • Conduct laboratory and field testing, including RF performance characterization and troubleshooting, • Support integration of RF systems with avionics, power, and software teams, • Develop test plans, procedures, and technical documentation, • Analyze EMI/EMC issues and implement mitigation strategies, • Support regulatory compliance activities (e.g., FCC or international spectrum requirements), • Participate in design reviews and contribute to continuous improvement of RF system performance, • Collaborate with external partners, vendors, and regulatory bodies as needed Required Qualifications • Bachelor’s degree in Electrical Engineering, RF Engineering, or a related field, • 5+ years of experience in RF engineering, communications systems, or related aerospace/telecommunications work, • Strong understanding of RF principles including propagation, modulation, filtering, and noise analysis, • Experience with RF simulation and design tools (e.g., HFSS, CST, ADS, MATLAB, or similar), • Hands-on experience with RF test equipment (spectrum analyzers, network analyzers, signal generators, etc.), • Experience designing or supporting antenna systems, • Ability to troubleshoot complex RF systems in lab and field environments, • Strong documentation and communication skills Preferred Qualifications • Master’s degree in Electrical Engineering or related discipline, • Experience with aerospace, high-altitude platforms, satellites, or UAV systems, • Knowledge of cellular, broadband, or long-range wireless communication systems, • Familiarity with EMI/EMC standards and testing, • Experience working in regulated environments or with spectrum licensing, • Ability to work effectively in a fast-paced, startup or innovation-driven environment What We Offer: At Sceye, we’re building more than high-altitude platforms—we’re building a workplace where people (and their pups) thrive. Here’s what you’ll enjoy: • Chef-Prepared Lunches – Fresh, onsite meals to keep you fueled and focused., • Snacks & Refreshments – Enjoy a variety of snacks and drinks available throughout the day., • Wellness Perks – Access to a gym, pickleball court, and an outdoor dog kennel., • Dog-Friendly Environment – Bring your four-legged friends to work and enjoy a pet-welcoming space., • Comprehensive Health Coverage – Medical, dental, vision, and disability insurance, with over 82% of premiums covered—and 100% for everything else., • 401(k) with Match – Company contributions that are yours from day one., • High-Performance Culture – Join a collaborative, inclusive environment where your work helps shape the future of aerospace. Equal Opportunity Employer: Sceye is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, gender identity or expression, age, disability, veteran status, or any other legally protected status. We encourage individuals from all backgrounds to apply, especially those who bring unique perspectives and experiences that can help us grow and innovate. If you require reasonable accommodation during the application or interview process, please contact us—we’re happy to assist.

Job DescriptionAbout PykaPyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes. Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce C02 emissions in their respective industries. What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. Role OverviewPyka is looking for an Electrical Engineer to join our experienced and enthusiastic team of engineers. In this role, you will be responsible for system level and component level design and testing across a wide range of subsystems. Below is a list of current hardware projects that you will contribute to. Your roles and responsibilities will vary significantly from one week to the next.- High power density motor controller (30kW ~ 100kW)- Electronics for airplane spray and pump system- Air data board- Various PCBs to streamline testing of the above hardware Candidates who thrive in fast-paced environments working with a small team will love this role.Responsibilities • Familiar with high power motor controller hardware design (120V, 30 kW). Able to select key components and sensors for the motor controller based on system requirements, • Hands-on experience in embedded system designs and familiarity with writing C or C++ code for microprocessor based embedded systems, • Deep understanding of different motor control algorithms such as field oriented control (FOC), six step control and different modulation schemes such as SPWM (Sinusoidal Pulse Width Modulation) and SVPWM (Space Vector Pulse Width Modulation), • Complete the entire PCBA design cycle including architecture selection, component selection, schematic design, PCB layout, and working with manufacturers, • Test and validate the design to meet performance and reliability requirements, • Work with cross-functional teams (Mechanical Engineering, Software, and Flight Testing) on aircraft integration and system level testing, • Occasional travel (approximately one week every 2-3 months) to customer sites to support new aircraft deployments or EE subsystem debugging, • Write design and testing documentsPreferred Qualifications, • 3-7 years of hands-on experience designing and testing microprocessor based high power motor controller for EVs or electric aircrafts, • Experience designing power electronics systems such as motor controllers, DC-DC converters, and BMS, • Experience designing safety critical systems, considering system redundancy as well as failure mode and effects analysis, • Familiarity with general schematic design and PCB layout tools such as Altium, OrCAD, Allegro, Eagle, KiCad, etc., • Willingness to travel internationally for up to 10% of the time, • An inquisitive attitude with an ability to quickly and deftly research new topics and develop mastery of new subjects, • Excellent written and verbal communication skills; the ideal candidate is not afraid to ask for clarification or give feedback, • We understand that candidates bring different strengths and experiences, and you don’t need to meet every qualification to be considered. If this role excites you, we’d love to learn more about you. You may be a great fit even if your background doesn’t align perfectly with the list.Compensation and Benefits, • $130,000 - 165,000 per year base salary + equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Salary ranges are subject to change., • Employer-sponsored health, dental and vision insurance, • FSA with employer matching, • 401(k), • Paid holidays, generous PTO, and additional unpaid time off, • Voluntary short-term disability, long-term disability, and life insurance, • Pre-tax commuter benefits

Job DescriptionAbout Zipline Zipline is the world's largest and most experienced autonomous delivery service, founded to serve all humans equally by ensuring access to essential goods anytime, anywhere. We design, build, and operate the world's largest autonomous logistics system, delivering critical supplies quickly and reliably. Today, Zipline operates on four continents, makes a delivery somewhere in the world every 30 seconds, and has completed millions of deliveries including blood, vaccines, medical supplies, food, and commercial products. Our customers include healthcare systems, governments, retailers, and global brands who rely on us to save lives, reduce emissions, increase economic opportunity, and provide new logistics services at scale. Our technology goes beyond drones. We deploy integrated logistics infrastructure that strengthens supply chains, reduces congestion, and enables instant delivery, transforming how essential goods reach people everywhere. With more than 140 million commercial autonomous miles safely flown, Zipline is redefining access to healthcare, consumer products, and food across the globe. We operate at a global scale and are looking for practical problem solvers who thrive on real-world challenges and rapid growth. Our team is motivated by building systems that have a direct, meaningful impact on people's lives and by scaling the future of logistics. About You and The Role Zipline is scaling drone production and flight operations by more than 20× over the next three years while maintaining best-in-class safety and reliability. You will own the entire supplier industrialization and supplier development engineering functions — building the team, processes, tools, and culture that make Zipline's massive scale-up possible without compromising quality, delivery, or cost. This role reports to the VP of Supply Chain, and will have 10-15 direct reports. What You'll Do • Full accountability for supplier readiness: every new program and every major ramp must pass through your organization's technical gates before volume commitments are made., • Build and lead a world-class team of Supplier Quality Engineers (SQEs), Industrialization Engineers, and NPI/Development Engineers, • Design and enforce Zipline's global Supplier Industrialization Framework from first principles:, • Advanced Product Quality Planning (APQP), • Production Part Approval Process (PPAP) with Zipline-specific submission requirements (FAI ("First Article Inspection"), PSW ("Part Submission Warrant"), dimensional reports, material certifications, process capability, etc.), • Process Failure Mode and Effects Analysis (PFMEA) moderation and risk buy-off methodology, • Run-at-Rate and ramp validation protocols, • Process capability roadmaps (Cpk targets, statistical process controls), • Supplier scorecard system (OTD ("On-Time Delivery"), PPM ("Parts Per Million" defect rate), capacity utilization, cost-reduction delivery, risk), • Digital interface collaboration with Software leadership to ensure issue tickets and RCCA are documented and routed back to suppliers, • Creation of robust, first-principles based should-cost modeling methodology. Build and maintain bottoms-up, parametric should-cost models for every critical commodity (carbon-fiber aero structures, high power density Li-ion battery packs, brushless propulsion motors, avionics/powertrain PCBAs, precision-machined flight-critical parts, ground systems hardware, etc). Your models will be the source of truth for commercial negotiation benchmarking, make-vs-buy decisions, and annual cost-reduction targets., • Lead technical deep dives with suppliers on Design for Manufacturability/Assembly (DFM/A), automation ROI, tooling investment, and value-engineering initiatives driven directly from should-cost models., • Develop dynamic capacity modeling tools that forecast supplier output 12–36 months forward under multiple demand scenarios, including the rate improvement action tracking systems needed to ensure industrialization risks are understood and mitigated, • Act as the final technical gatekeeper in Production Readiness Reviews (PRRs) and PPAP/FAI sign-offBasic Qualifications, • Bachelor's degree in Mechanical, Industrial, Aerospace, Manufacturing, or Electrical Engineering., • 8-15+ years in supplier quality, supplier development, or manufacturing/industrialization engineering in safety-critical or regulated hardware., • 8+ years directly managing and scaling technical teams of 10+ engineers (hiring, mentoring, org design, span-of-control optimization)., • Multiple end-to-end APQP ("Advanced Product Quality Planning") and PPAP ("Production Part Approval Process") cycles personally led from kick-off through PSW approval in aerospace, automotive Tier-1, medical device (Class II/III), or high-volume consumer electronics., • Proven track record taking at least three complex suppliers from prototype/low-rate (<5K units/yr) to full-rate production (>100K units/yr) while achieving Cp/Cpk ≥ 1.67 and GR&R ("Gage Repeatability & Reproducibility") < 10% on critical characteristics., • Expert-level command of GD&T ("Geometric Dimensioning & Tolerancing"), MSA ("Measurement System Analysis"), SPC ("Statistical Process Control"), FAI per AS9102, PFMEA, Control Plans, and DOE ("Design of Experiments")., • Hands-on experience building and defending bottom-up should-cost models that drove >15% cost reduction on programs exceeding $50M annual spend., • Demonstrated ability to create new processes and tools in high-growth, ambiguous environments (startups or business units that 5×–20×'d revenue in <5 years)., • Willing and able to travel internationally 40–50% (including 2–4 week stints in Asia during critical ramps).Preferred Qualifications, • Master's degree in Engineering or MBA from a top university, • 5+ years in certified aerospace (Part 21/145), eVTOL, automotive, or autonomous vehicle programs with direct FAA/EASA/NTSB exposure., • Deep domain expertise in one or more of Zipline's core commodities listed above., • Six Sigma Black Belt or Master Black Belt with completed DMAIC projects delivering substantial annualized savings., • Personally built and institutionalized should-cost platforms (using Excel + Python, Costimator, aPriori, or custom tools) that became the standard for an entire company or division., • Former leadership roles at top firms, such as SpaceX, Tesla, Joby, Archer, Google, Anduril, Rivian, Lucid, DJI, Boston Dynamics, Apple hardware, or Tier-1 aerospace suppliersLeadership Expectations, • Exceptional ability to hire top 5% A-players and keep them challenged and growing, • You are the technical conscience of the supply chain—data-driven, willing to kill or delay a ramp when data demands it, and able to persuade executives with rigorous analysis., • You obsess over root cause and preventive systems; firefighting is a process failure on your watch. The starting cash range for this role is $225,000 - $275,000. Please note that this is a target, starting cash range for a candidate who meets the minimum qualifications for this role.The final cash pay for this role will depend on a variety of factors, including a specific candidate's experience, qualifications, skills, working location, and projected impact. The total compensation package for this role may also include: equity compensation; overtime pay; discretionary annual or performance bonuses; sales incentives; benefits such as medical, dental and vision insurance; paid time off; and more. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, ancestry, national origin, religion or religious creed, mental or physical disability, medical condition, genetic information, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity, gender expression, age, marital status, military or veteran status, citizenship, or other characteristics protected by state, federal or local law or our other policies. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Job DescriptionAbout Zipline Zipline is the world's largest and most experienced drone delivery service. We are on a mission to serve all humans equally by ensuring access to food, medicine and essential goods anytime, anywhere. We design, build, and operate the world's largest autonomous logistics system, delivering critical supplies quickly and reliably. Today, Zipline operates on four continents, makes a delivery somewhere in the world every 30 seconds, and has completed millions of deliveries to date, including blood, vaccines, medical supplies, food, and retail products. Our customers include the world's largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible. The drone is only 15% of what we've built to enable seamless, reliable, global operations. Our system strengthens supply chains, reduces congestion, and gives people time back. With more than 140 million commercial autonomous miles safely flown, Zipline is redefining access to healthcare, consumer products, and food across the globe. We operate at a global scale and are looking for practical problem solvers who thrive on real-world challenges and rapid growth. Our team is motivated by building systems that have a direct, meaningful impact on people's lives and by scaling the future of logistics. We are seeking people who sculpt from first principles, enjoy facing adversity, and can do the impossible at record breaking speeds. About The Role Zipline's software team is dedicated to rapidly delivering safety-critical software for our delivery drones. As a small team of software engineers, we build the essential tools that ensure a seamless development process. In this role, you will collaborate closely with software engineers across various domains, including autonomy, firmware, flight software, avionics, and simulation. Your responsibilities will involve enhancing our CI/CD system, empowering teams to gain deeper insights from their PR workflows, and maintaining a smooth development flow. This position offers a dynamic blend of high-level strategic planning, such as identifying key investments and evaluating new tools, and deep dives into our codebase for debugging and improvements. You will also engage in customer-centric work, partnering with other software engineers on critical infrastructure, designing new pipelines, and facilitating code migrations to new platforms. What You'll Do • Own our monorepo CI/CD pipelines (Github Action, Buildkite), • Maintain observability stack (Datadog, Grafana), • Improve the speed and reliability of our CI/CD pipeline (Bazel caching and remote execution), • Collaborate with engineers to materialize their CI requirements, • Implement and operate bazel remote execution for custom hardware and cloud native environments, • Build tooling to support engineering test flights, • Improve the code review process and align company wide, • Build bots and automation that delight the teamWhat You'll Bring, • 8+ years of experience in a software development role at engineering-led companies, • Expertise in developer tooling, modern tools and best practices, • A generalist mindset, with excitement to own problems end-to-end, • A customer-centric mindset, with an ability to quickly embed with other engineers and regularly pair program, • Strong, defensible opinions on what makes an excellent software development experienceWhat Else You Need to Know This role is an in-office opportunity based out of our South San Francisco HQ. The starting cash range for this role is $170,000-210,000. Please note that this is a target, starting cash range for a candidate who meets the minimum qualifications for this role. The final cash pay for this role will depend on a variety of factors, including a specific candidate's experience, qualifications, skills, working location, and projected impact. The total compensation package for this role may also include: equity compensation; discretionary annual or performance bonuses; sales incentives; benefits such as medical, dental and vision insurance; paid time off; and more.Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, ancestry, national origin, religion or religious creed, mental or physical disability, medical condition, genetic information, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity, gender expression, age, marital status, military or veteran status, citizenship, or other characteristics protected by state, federal or local law or our other policies.We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Job DescriptionAbout PykaPyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes. Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce CO2 emissions in their respective industries. What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. Role OverviewPyka is looking for a Mechanical Design Engineer to join our experienced, collaborative, and highly motivated engineering team. In this role, you’ll take meaningful ownership of mechanical components and subsystems on the aircraft, supporting them from early concept through serial production and in-field support.Our Mechanical Engineering team works closely with Manufacturing Engineers, Flight Test Engineers, and fellow Mechanical Engineers to design, test, and iterate on flight-critical hardware. This is a fast-paced, hands-on role with real impact—you’ll be trusted with significant responsibility while being supported by a team that values clear communication, iteration, and continuous learning.You’ll have the opportunity to contribute across the full lifecycle of the aircraft, influence design decisions early, and see your work fly (literally).Responsibilities • Act as the Design Responsible Engineer for multiple mechanical components, from initial requirements through serial production and in-field support, • Collaborate with Senior Engineers on conceptual design, prototyping, testing, iteration, and documentation of flight-critical mechanical parts and assemblies, • Create and maintain accurate 3D CAD models, drawings, and manufacturing documentation, • Partner with manufacturing teams to develop tools and processes that enable efficient in-house production, • Communicate with external suppliers and fabricators to ensure high-quality parts are delivered on time, • Contribute to a team culture that values asking questions, sharing feedback, and solving problems collaborativelyRequired Qualifications, • 3–5+ years of professional experience in mechanical design; aerospace experience is a plus but not required, • Experience designing composite structures and supporting their analysis and manufacture, • Familiarity with designing parts for a variety of manufacturing processes, such as 3D printing, CNC machining, injection molding, and sheet metal, • Strong written and verbal communication skills, with comfort asking for clarification and providing thoughtful feedback, • Experience using a 3D CAD package (e.g., SolidWorks, NX, Inventor), • Experience applying FEA and hand calculations to validate mechanical design decisions (stress, strain, thermal, fatigue)Preferred Qualifications, • Curiosity and an eagerness to learn, with the ability to research new topics and try new approaches, • Enthusiasm for hands-on work in a prototyping or shop environment, • We understand that candidates bring different strengths and experiences, and you don’t need to meet every qualification to be considered. If this role excites you, we’d love to learn more about you. You may be a great fit even if your background doesn’t align perfectly with the list.Compensation and Benefits, • $118,000 - 166,000 per year base salary + equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Salary ranges are subject to change., • Employer-sponsored health, dental and vision insurance, • FSA with employer matching, • 401(k), • Paid holidays, generous PTO, and additional unpaid time off, • Voluntary short-term disability, long-term disability, and life insurance, • Pre-tax commuter benefits

Job DescriptionABOUT ZIPLINE Zipline is the world's largest and most experienced autonomous delivery service, founded to serve all humans equally by ensuring access to essential goods anytime, anywhere. We design, build, and operate the world's largest autonomous logistics system, delivering critical supplies quickly and reliably. Today, Zipline operates on four continents, makes a delivery somewhere in the world every 30 seconds, and has completed millions of deliveries including blood, vaccines, medical supplies, food, and commercial products. Our customers include healthcare systems, governments, retailers, and global brands who rely on us to save lives, reduce emissions, increase economic opportunity, and provide new logistics services at scale. Our technology goes beyond drones. We deploy integrated logistics infrastructure that strengthens supply chains, reduces congestion, and enables instant delivery, transforming how essential goods reach people everywhere. With more than 140 million commercial autonomous miles safely flown, Zipline is redefining access to healthcare, consumer products, and food across the globe. We operate at a global scale and are looking for practical problem solvers who thrive on real-world challenges and rapid growth. Our team is motivated by building systems that have a direct, meaningful impact on people's lives and by scaling the future of logistics. ABOUT YOU AND THE ROLE The Avionics team is a group of hardware, software, and test experts responsible for designing robust systems that control our life-saving drone delivery service in some of the toughest environments on Earth. Our team designs aircraft avionics that must excel in a wide range of harsh, real-world climates and electromagnetic interference (EMI) environments. The Avionics system is a vital part of the overall zipline aircraft system architecture, where we strive to achieve high performance and reliability while minimizing mass and cost. You and our team will be responsible for delivering high performance flight computers, communication, and navigation systems that are tightly integrated into the vehicle. These avionics systems are at the core of a new unmanned aerial system that will enable Zipline's impact to expand from 100,000 deliveries/year to 100 million across the globe. Zipline's future success depends on the development of avionics systems that are low mass, low cost, high reliability, and produced at high volumes. Rigorous design engineering and validation is required, as well as ingenuity in approaches to packaging, integration, fault tolerance, and validation. We are looking for a test engineer with a strong foundation in electrical engineering fundamentals and prior experience with manufacturing test, design validation, system performance characterization, and certificaiton. WHAT YOU'LL DO • Own the design validation and test planning efforts for our avionics products; including both design validation and manufacturing test., • Develop a deep understanding of components under test becoming a subject matter expert in the component's behavior under a range of environmental, performance, and system conditions., • Coordinate cross-functional teams and external vendors to deploy high quality test plans and test systems in a timely manner to support production timelines, • Drive end-to-end test campaigns from development through design validation, certification, and production (often working all facets simultaneously)., • Triage and root-cause field failures, using data analysis, test heritage, correlation to operating conditions, and one-off test campaigns., • Support the certification testing to enable our aircraft to fly in the real world.WHAT YOU'LL BRING, • 5+ years of experience in EE test engineering roles, with manufacturing test, system performance testing, certification, and design validation experience, • Bachelors and/or Masters degree in Electrical Engineering, • Past test engineering experience in sensors and electronics for critical systems in fields such as automotive, aerospace, transportation, or medical devices., • Test asset design validation for products in high-volume production environments., • Experience developing test plans, test requirements, test standards, and test criteria for hardware products, pcba's, and sensors, • Proficient in Python, Linux environments, and scripting languages such as Bash or Shell., • Enthusiasm for collaborating in a fast paced, cross-functional environment., • Clear communication skills and the ability to explain technical challenges and solutions to fellow engineers and non-engineers alike., • Must be eligible to work in the US. The starting cash range for this role is $145,000 - $185,000. Please note that this is a target, starting cash range for a candidate who meets the minimum qualifications for this role. The final cash pay for this role will depend on a variety of factors, including a specific candidate's experience, qualifications, skills, working location, and projected impact. The total compensation package for this role may also include: equity compensation; overtime pay; discretionary annual or performance bonuses; sales incentives; benefits such as medical, dental and vision insurance; paid time off; and more. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Job DescriptionAbout PykaPyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes. Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce CO2 emissions in their respective industries. What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. Role Overview Pyka is seeking a talented Inventory Warehouse Coordinator to join our team as we revolutionize autonomous electric aircraft. You will be responsible for the daily operations of our Inventory Warehouse, including incoming and outgoing inventory, kitting, and distribution of aircraft components such as avionics, wire harnesses, and composite structures. Your expertise will play a critical role in ensuring that all of Pyka’s teams, from Production through Flight Operations, have the parts and assemblies they need to build, test, and iterate. You will play a critical role in improving the agility and sustainability of Pyka’s Supply Chain, Logistics, and Manufacturing processes. Responsibilities * Warehouse Excellence: Manage the physical warehouse space by adhering to the standard operating procedures (SOPs) and contributing to continuous process improvements. * Inventory Control: Maintain high levels of inventory accuracy and proactively process orders for critical components to prevent production delays. * Kitting & Assembly: Execute precise kitting of Airframe, Integration, and Electrical components based on complex Bill of Materials (BOM) assemblies. * Stock Management: Ensure that all consumables and hardware essential for Production and Engineering teams are consistently stocked and easily accessible. * Receiving & Inspection: Oversee the intake of all packages, managing the receiving process and conducting initial quality inspections. * Cross-functional Collaboration: Work closely with the cross-functional teams to resolve inventory dispositions, shortages, and discrepancies. * Audit & Reporting: Conduct inventory counts and contribute to the data-driven strategies for tracking goods movement and determining stocking levels. * Site Maintenance: Ensure the warehouse is clean, logically organized, and maintained to high safety and efficiency standards. * Logistics Support: Coordinate and assist with the logistics of both domestic and international shipments. Qualifications • 1–3 years of experience in Inventory Management or Warehouse Operations., • Familiarity with inventory control software, ERP systems (e.g., NetSuite, SAP, Odoo), and/or MRP systems., • Understanding of eBOMs, mBOMs, and Product Structures, • Experience in aviation, • Extremely high attention to detail, strong multitasking and organizational skills, • Ability to prioritize multiple competing tasks, • Forklift certified with hands-on experience in heavy materials handling., • Ability to prioritize competing tasks in a fast-paced environment and communicate effectively across teams. Compensation and Benefits, • Compensation: Inventory Warehouse Coordinator II — $32.00–$36.50 per hour + equity; Senior Inventory Warehouse Coordinator — $37.00–$42.00 per hour + equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Salary ranges are subject to change., • Employer-sponsored health, dental and vision insurance, • FSA with employer matching, • 401(k), • Paid holidays, generous PTO, and additional unpaid time off, • Voluntary short-term disability, long-term disability, and life insurance, • Pre-tax commuter benefits, • Free catered lunch, plenty of snacks, and a collaborative workspace

Job Description About You and The Role As a Senior Integration & Test Software Engineer at Zipline you will have the unique opportunity to develop and deploy high quality software that will power test systems used throughout the production, design, and operation of our long range drone platform. In this role, you will gain a deep understanding of our embedded flight code, test infrastructure, manufacturing processes, and operations. You will own these test systems from early prototype design all the way through deployment in test or production environments. In some cases, you will also be responsible for reviving and improving test systems that have been dormant since the last product improvement phase. You will also spearhead improvement initiatives, lead root cause investigations, interface with cross-functional stakeholders, and drive schedules and deliverables with a focus on quality, reliability, and safety. Most importantly, your work will directly contribute to the continued evolution of our long-range drone system and enable critical improvements across reliability, capability and accessibility of our technology. Your testers will be critical in ensuring our systems are as reliable as they can be before they are shipped all over the world to perform vital, life-saving deliveries. Success in this role requires a strong sense of ownership, outstanding technical foundations, excellent communication skills, and the ability to translate between hardware, software, manufacturing, and operations. If you thrive at the intersection of software and real-world impact, and enjoy bringing clarity and progress to complex systems, you'll feel right at home! What You'll Do • Become the technical owner of test systems across manufacturing and engineering disciplines for our long-range drone platform (e.g. SIL, HIL, EOLT etc.), • Architect, develop, deploy, troubleshoot, and improve testing software and assets used to validate components from avionics boards, sensors, motors, batteries, and other mechatronic assemblies., • Develop and elevate testing standards and protocols to ensure the highest levels of quality and testing rigor to facilitate efficient and safe engineering and manufacturing changes., • Develop a deep understanding of components under test, becoming a subject matter expert in the component's behavior under a range of environmental, performance, and system conditions., • Collaborate with other internal teams to organize and define our approach to data handling for all test assets. Develop automation scripts and visualization tools to streamline design and optimize production testing., • Interface with cross-functional teams and external vendors to deploy reliable high quality test systems.What You'll Bring, • Demonstrable history of assuming ownership of cross-disciplinary engineering problems, and driving them from inception to solution in an open-ended environment., • Proficiency in Python and C/C++, • Experience working with and managing Linux systems, • Experience working with embedded systems, • Experience building automation systems for use in safety-critical and factory applications., • Experience working with Git / CI and software development and validation processes in a medium to large scale organization., • Experience developing software that interfaces directly with hardware including navigating datasheets and validating hands-on with representative hardware., • Experience developing test plans, test requirements, and test criteria for hardware products., • Experience using and deep understanding of common test instrumentation and data acquisition hardware., • Experience solving complex multidisciplinary problems with little supervision on schedule as an individual or as a member of an integrated team., • Must be authorized to work in the US., • Note: this is an onsite role at our South San Francisco office with potential for some travel opportunities. What Else You Need to Know The starting cash range for this role is $165,000 - $215,000. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, ancestry, national origin, religion or religious creed, mental or physical disability, medical condition, genetic information, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity, gender expression, age, marital status, military or veteran status, citizenship, or other characteristics protected by state, federal or local law or our other policies.We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Job DescriptionAbout Zipline Zipline is the world's largest and most experienced drone delivery service. We are on a mission to serve all humans equally by ensuring access to food, medicine and essential goods anytime, anywhere. We design, build, and operate the world's largest autonomous logistics system, delivering critical supplies quickly and reliably. Today, Zipline operates on four continents, makes a delivery somewhere in the world every 30 seconds, and has completed millions of deliveries to date, including blood, vaccines, medical supplies, food, and retail products. Our customers include the world's largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible. The drone is only 15% of what we've built to enable seamless, reliable, global operations. Our system strengthens supply chains, reduces congestion, and gives people time back. With more than 140 million commercial autonomous miles safely flown, Zipline is redefining access to healthcare, consumer products, and food across the globe. We operate at a global scale and are looking for practical problem solvers who thrive on real-world challenges and rapid growth. Our team is motivated by building systems that have a direct, meaningful impact on people's lives and by scaling the future of logistics. We are seeking people who sculpt from first principles, enjoy facing adversity, and can do the impossible at record breaking speeds. About You and The Role The Avionics team is a group of hardware and software experts responsible for designing robust systems that control our life-saving drone delivery service in some of the toughest environments on Earth. Our team designs aircraft avionics that must excel in a wide range of harsh, real-world climates and electromagnetic interference (EMI) environments. The Avionics system is a vital part of the overall zipline aircraft system architecture, where we strive to achieve high performance and reliability while minimizing mass and cost. You and your team will be responsible for delivering high performance communication and navigation systems that are tightly integrated into the Avionics flight computer. These radio systems are at the core of a new unmanned aerial system that will enable Zipline's impact to expand from 100,000 deliveries/year to 100 million across the globe. Zipline's future success depends on the development of avionics systems that are low mass, low cost, high reliability, and produced at high volumes. Rigorous design engineering and validation is required, as well as ingenuity in approaches to packaging, integration, fault tolerance, and validation. We are looking for a leader with a strong foundation in RF system design and an excellent grasp of communication system design, RF electronics, and antenna design. What You'll Do • Join a small but mighty team of RF engineers owning RF communications at Zipline. This includes Zip to Zip, Zip to Dock, Zip to Droid, and Zip to GA Aircraft. Today, we use tightly integrated 802.11, cellular, ADS-B, and GNSS radio systems., • Develop and implement RF engineering processes to ensure high quality on tight, deterministic timelines., • Provide technical leadership in system level design spanning RF link budgets, interference analysis, and RF MAC layer., • Define, trade, revisit, and update vehicle RF architecture. Optimize at the integrated vehicle and fleet system levels., • Design radios, amplifiers, filters, and antennas to meet RF architecture and requirements., • Develop confirmation tests, including functional, end of line, and system level tests to ensure the RF systems meet all the necessary specifications., • Coordinate regulatory and industry certification for domestic and international markets., • Coordinate within the Avionics and Ground Systems teams to implement the RF systems in the aircraft highly integrated flight computer as well as the Zip Dock., • Coordinate across teams such as GNC, Aero, and Perception to determine requirements for the RF system performance, identify trades, and ensure reliable operation for downstream systems., • Ongoing engineering to successfully sustain the operation of existing avionics systems in our existing fleet of thousands of aircraft.What You'll Bring, • Demonstrated skill building and leading a team of engineers to achieve ambitious goals, with proven success, • 3-10 years of experience in RF engineering roles, • Past success developing electronics for critical systems in fields such as automotive, aerospace, transportation, or medical devices., • Deep design experience in one or more of the following areas: RF system design and analysis, antenna design, or practical implementation of complex RF systems., • Strong understanding of communication system fundamentals including linear systems, signal processing, and communication theory., • Familiarity with RF design tools such as ADS, CST, Microwave Office, MATLAB, or Simulink., • Enthusiasm for collaborating in a fast paced, cross-functional environment., • Clear communication skills and the ability to explain technical challenges and solutions to fellow engineers and non-engineers alike., • Bachelors and/or Masters degree in Electrical Engineering, with focus on RF Comms and Design, • Must be eligible to work in the US., • Must be able to work in person at Zipline's South San Francisco office.What Else You Need to Know The starting cash range for this role is $160,000 - $200,000. Please note that this is a target, starting cash range for a candidate who meets the minimum qualifications for this role. The final cash pay for this role will depend on a variety of factors, including a specific candidate's experience, qualifications, skills, working location, and projected impact. The total compensation package for this role may also include: equity compensation; discretionary annual or performance bonuses; sales incentives; benefits such as medical, dental and vision insurance; paid time off; and more. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, ancestry, national origin, religion or religious creed, mental or physical disability, medical condition, genetic information, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity, gender expression, age, marital status, military or veteran status, citizenship, or other characteristics protected by state, federal or local law or our other policies. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Job Description ABOUT THE ROLE Zipline is looking for software engineers to build the tools and infrastructure that power our systems validation and flight test organizations. This team develops precise, efficient, and scalable software solutions used to validate aircraft and ground systems at every level. Our work spans everything from integrating real avionics, sensors, actuators, and radios with high-fidelity simulated environments in bench-top Hardware-in-the-Loop (HIL) setups, to building applications that plan, orchestrate, and evaluate thousands of automated nominal and off-nominal real-world flight tests every day. This role directly impacts the speed, confidence, and quality of hardware and software development at Zipline. In this role, you will develop a deep understanding of Zipline's end-to-end logistics system and work closely with cross-functional partners who rely on your tools to deliver reliable, flight-ready software. Most importantly, the systems you build will serve as the final line of defense before software and hardware is deployed globally to perform critical, real-world deliveries. WHAT YOU'LL DO • Design, develop, and maintain HIL test infrastructure that integrates real aircraft hardware with simulated systems and environments., • Develop software tools, frameworks, and services to enable large-scale automated and semi-automated system validation., • Support a high-throughput flight test organization running thousands of daily tests, from targeted regression tests to rare off-nominal scenarios., • Write and maintain test software, drivers, and interfaces for embedded and Linux-based systems., • Support test framework architecture designs and improvements., • Debug complex validation failures spanning simulation, hardware, firmware, and application software, • Collaborate with flight test engineers, systems engineers, avionics, autonomy and embedded software teams to define system-level validation strategies., • Improve test reliability, debuggability, and signal-to-noise as systems and test volume scale.WHAT YOU'LL BRING, • 4+ years of experience in software engineering for complex, hardware-backed, safety-critical systems., • Extensive experience in Python, specifically using test systems (e.g. pytest), • Experience testing Rust and/or C embedded systems., • Extensive experience working with CI/CD., • Experience developing and executing test plans for complex, safety critical, embedded and cloud software. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, ancestry, national origin, religion or religious creed, mental or physical disability, medical condition, genetic information, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity, gender expression, age, marital status, military or veteran status, citizenship, or other characteristics protected by state, federal or local law or our other policies. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Job DescriptionAbout PykaPyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes. Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce CO2 emissions in their respective industries. What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. Role OverviewPyka is looking for a Flight Test Operator to test and scale the operations of its advanced autonomous aircraft. You will test our new hardware and software features to ensure the success of Pyka’s customer operations around the globe. Your work will focus on testing the continuous operation of Pyka’s aircraft and ground infrastructure. This is a multidisciplinary role that interacts with many internal teams, so written and verbal communication skills are critical. Your work will be instrumental in Pyka’s growth as we build the best safe product for our customers. You will focus on operating at Pyka’s local California test sites, and may deploy to our international customers to support as needed. Responsibilities • Execute continuous operations at Pyka’s test sites by identifying and troubleshooting issues, with the remote help of Pyka’s engineering teams, • Conduct reliability test campaigns with Pyka’s autonomous aircraft and ground support infrastructure, • Provide detailed technical feedback to operations and engineering teams to improve Pyka’s product for customer deployment, • Fly and test new hardware and software features, • Conduct diverse fleet site maintenance activities, involving the aircraft itself and ground infrastructure, • Serve as Pilot In Command or Ground Control Operator of experimental / developmental unmanned aircraft, • Deploy customer test sites to support Agricultural and Cargo Operations - 25% of total time.Prefered Qualifications, • 1-3 years of experience flying fixed wing UAVs / model aircraft or large multirotors, • Experience with ground control and mission planning software, • 1–5 years of experience working with and troubleshooting mechanical and electrical systems, • Basic high voltage safety knowledge and comfortable working on 120 VDC, 20 ~ 30 kW systems, • Knowledge of aircraft systems, maintenance, and manuals, • Independent and motivated, able to self-direct and manage time, • Extreme thoroughness and attention to detail, • Excellent written and verbal communication skills, • Willing to work at test sites in the Central Valley, • Part 61 pilot certificateCompensation and Benefits, • Flight Test Operator: $34.50–$39/hr + Equity, Flight Test Operator II: $40–$45/hr + Equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Hourly wage ranges are subject to change., • Employer-sponsored health, dental, vision, long-term disability and life insurance, • FSA with employer matching, • 401(k) plan, • Paid holidays, generous PTO, and additional unpaid time off, • Voluntary short-term disability and life insurance, • Pre-tax commuter benefits

Harnessing Engineer (Launch Vehicle Avionics) The Team Our clients Avionics team is responsible for the electrical architecture that powers and controls the launch vehicle. As a Harnessing Engineer, you'll own the design and execution of flight and test harnesses that connect avionics, sensors, powe

Job DescriptionAbout PykaPyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes. Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce CO2 emissions in their respective industries. What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. Role Overview Pyka is looking for a Senior Embedded Software Engineer with deep technical curiosity and a passion for building the low-level systems that power autonomous aircraft. In this role, you’ll design and maintain the embedded software that runs on our flight computers, auxiliary computers, and hardware-in-the-loop (HIL) testing systems — the infrastructure that ensures our aircraft behave safely and reliably in the real world. You’ll work closely with electrical, avionics, systems, and flight control engineers to bring up new hardware, develop robust firmware architectures, and expand our automated HIL testing capabilities. If you’ve built embedded systems for robots, vehicles, or other real-time machines, you’ll feel at home shaping the foundation that every Pyka aircraft depends on.If you’re excited about this role but don’t meet every single requirement, we still encourage you to apply — we’d love to meet people who bring passion, curiosity, and the ability to grow into new challenges.Responsibilities • Own the full firmware lifecycle for new flight and auxiliary computers — from board bring-up and driver development to integration, testing, and flight-ready release, • Maintain and develop Pyka’s hardware-in-the-loop (HIL) testing environment, enabling automated validation of flight-critical systems, • Implement drivers for off-the-shelf and custom sensors (I²C, SPI, CAN, UART/serial, etc.), • Bring up new hardware platforms, including bootloaders, board initialization, hardware abstraction layers, and diagnostics, • Collaborate with cross-disciplinary teams to define interfaces, requirements, and validation plans, • Investigate and resolve hardware/software interaction issues across microcontrollers, sensors, and embedded Linux systemsRequired Qualifications, • 5+ years of experience developing embedded software or firmware for real-time or hardware-integrated systems, • Strong proficiency in C/C++ and experience with microcontrollers and embedded Linux (e.g., BalenaOS), • Comfortable implementing sensor and peripheral drivers (I²C, SPI, CAN, UART, ethernet), • Comfortable with git and modern collaborative software development workflows, • Able to independently own complex, cross-disciplinary engineering projectsPreferred Qualifications, • Experience with FPGAs or HDL development, • Experience with electric motor controllers or motor control firmware, • Familiarity with hardware-in-the-loop testing and embedded automated test frameworks, • We understand that candidates bring different strengths and experiences, and you don’t need to meet every qualification to be considered. If this role excites you, we’d love to learn more about you. You may be a great fit even if your background doesn’t align perfectly with the list.Compensation & Benefits, • 166,000-200,000 per year base salary + equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Salary ranges are subject to change., • Employer-sponsored health, dental and vision insurance, • SA with employer matching, • 401(k), • Paid holidays, generous PTO, and additional unpaid time off, • Voluntary short-term disability, long-term disability, and life insurance, • Pre-tax commuter benefits