Body shop jobs in San Diego, CaliforniaCreate job alerts

Job Description Labor One is hiring Journey-Level Carpenters for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:To perform this job an individual must be able to understand the full scope of work of any assigned job and successfully complete the required tasks with minimal supervision. Tasks include constructing, installing, repairing, and fabricating structures (primarily wood) to protect ship's equipment, outfitting the drydock with docking blocks, and outfitting ships in accordance with specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. High school degree or equivalent (GED), or vocational school degree. Must have six (6) years of related experience. QUALIFICATIONS, DUTIES, AND RESPONSIBILITIES -Must possess the skill sets of subordinate grades of the labor class. -Must be able to interpret and work from drawings, job specifications, instruction manuals, manufacturer's handbooks, change orders, and contract specifications. -Must possess a thorough understanding of equipment and work processes used in marine carpentry, joiner, and drydock blocking operations. -Must be able to operate and care for Carpenter Shop equipment, portable power tools, and hand tools. Layout, cut, and fabricate products from blueprints, owner specifications, and sketches. -Must be able to work with US standard and metric measurements and be able to add, subtract, multiply and divide. -Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. -Carry out instructions furnished in written, oral, or diagram form. Deal with unexpected events related to your assigned task in a professional manner. -Accountable for completion of daily work assignments including the completion and signatures to work completion and quality. -Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. Personnel are accountable for completion of daily work assignments. -Must comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) -Keep the work area clean and safe at all times, especially at the end of the shift. -Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. COMMUNICATION SKILLS The candidate must be able to read and comprehend basic instructions, short correspondence, and memos to the extent necessary to accomplish the work requirements. Must be able to interpret specifications and drawings and possess the ability to write comprehensive Condition Found Reports (CFR) describing the problem found, and corrective action required. Must be able to communicate hazardous conditions to other employees. WORK ENVIRONMENT -The work environment described are representative of those an employee will encounter while performing the essential functions of this job. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished from mechanical lifts. -The working environment in the shipyard varies from a normal office environment to outside weather conditions of precipitation, wind, extreme cold, and extreme heat and high humidity. When working inside of vessels the environment may be smoky, hot or cold, and low levels of illumination may be present. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description This position is located in Laramie, WY and will require candidates that have been offered the position to relocate to the surrounding area. WyoTech is seeking experienced motorsports chassis fabricators to join our team as instructors at our Laramie, WY campus. This is a unique opportunity for skilled professionals who are ready to mentor and teach the next generation of technicians. No prior teaching experience is required, just a passion for your craft and a desire to share it. Instructors work alongside Lead Instructors and may also teach independently. If you're ready to bring your real-world knowledge into the classroom and support our mission of Best Training. Best Experience. Best Outcomes. Please apply! We’re always on the lookout for talented individuals to join our team, both on campus and across the U.S. If you don’t see a current opening that’s the right fit, we encourage you to apply anyway. Qualified applicants will be considered for future opportunities, and we’ll keep your resume on file for roles that match your experience and skills. Minimum Qualifications Candidates must meet state certification, regulatory agencies, and accrediting body requirements, including but not limited to: • 5+ years of experience in the high-performance automotive industry, with a focus on restoration, customization, and chassis fabrication, • Proven expertise in precision welding, including both MIG and TIG techniques, applied in motorsports or custom builds, • Strong working knowledge of suspension systems, steering geometry, tubular frame construction, and overall chassis design, • Tech-savvy and computer proficient, with the ability to quickly adapt to industry-specific software used in an educational or technical setting, • Hands-on experience with classic vehicles, custom trucks, race cars, or other performance-focused builds, • Advanced skills in metal shaping, fabrication, minor machining, and working with a variety of metals and materials, • A collaborative mindset with a positive, team-oriented attitude in a shop-floor environment, • Willingness and ability to learn and apply software tools related to chassis design, blueprint interpretation, or fabrication planning Duties and Responsibilities • Adhere to and ensure the enforcement of WyoTech policies and procedures as stated in the Employee Handbook; Advise students on attendance, grades, professionalism, and personal problems to ensure completion of their career program, • Submit grades, tests, attendance, and all other material; Plan class instruction based on the syllabus and ensure learning objectives are met. Ensure all educational activity is conducted ethically and legally; Utilize the CANVAS LMS system, • Support EPA and safety procedures; Encourage students to do safe, quality work with safety precautions, • Maintain and attend to the repair, as necessary, of class equipment and tool inventory, • Attend scheduled instructor meetings, graduation, and registration; Participate in curriculum and professional development; Communicate effectively with all WyoTech faculty and staff, • Encourage motivation and enthusiasm in the shop and classroom; Develop a professional rapport with the students, • Prepare adequately for class and shop before start time; Have supplemental teaching items ready; Provide appropriate information, resources, and assignments for a lesson; Provide peer tutors as needed, • Monitor class; Remain in control of the class throughout the classroom lesson and in the shop, • Follow ADA Requirements, • Be available for students 15 minutes before and 15 minutes after the scheduled class time, • Always maintain security on all tests and lesson plans; Always maintain confidentiality, • Work with students to make a difference in their lives, • Work with a great company that supports not only its staff but the community as well, • Team building, • Tuition reimbursement, • Competitive benefit package, • PTO and paid holidays, • 401K, • Health insurance - vision and dental included Applicants who are offered an appointment are required to pass a comprehensive background investigation and driver's license check. Salary Description $62,500.00-$90,000.00 Company DescriptionWe are a school that offers world class training in the Automotive, Collision, and Diesel industries along with our specialties programs Street Rod, Motorsports Chassis Fabrication, High Performance Power Trains, Trim & Upholstery, and Applied Service Management, Our company has an excellent reputation among students, alumni, and employers of our graduates. We are locally owned and led by people who are dedicated to working hard, having fun, and doing right by our customers and each other. Applicants who are offered an appointment are required to pass a comprehensive background investigation and driver license check.We are a school that offers world class training in the Automotive, Collision, and Diesel industries along with our specialties programs Street Rod, Motorsports Chassis Fabrication, High Performance Power Trains, Trim & Upholstery, and Applied Service Management, Our company has an excellent reputation among students, alumni, and employers of our graduates. We are locally owned and led by people who are dedicated to working hard, having fun, and doing right by our customers and each other.\r\n\r\nApplicants who are offered an appointment are required to pass a comprehensive background investigation and driver license check.

Job Description Join Our Team as a Body Shop Estimator at Toyota Carlsbad Collision Center! Are you an experienced Body Shop Estimator ready to elevate your career? Toyota Carlsbad Collision Center is seeking a talented individual to join our award-winning team. With us, you’ll find a supportive environment, ample opportunities for career advancement, and a comprehensive benefits package that caters to your needs. What We Offer: • Excellent Pay Plan, • Opportunities for career growth and advancement, • Comprehensive Medical, Dental, and Vision Plans, • Company-paid Life Insurance, • 401(k) with matching contributions, • Paid Vacation, • Welcome customers warmly, addressing their collision repair needs with empathy and urgency., • Assess vehicle damage to determine the extent of structural, body, mechanical, or interior damage., • Prepare precise estimates, detailing necessary parts and labor, using standard guideline manuals., • Ensure timely parts availability by following up on orders., • Clearly explain the repair process to customers and provide regular status updates., • Assist customers with rental arrangements and necessary paperwork., • Inquire about any additional work customers might want., • Review and adjust estimates and supplements for time allowances., • Oversee the quality check of completed jobs and assist in final billing preparation., • Support Collision Center management in their various responsibilities., • A minimum of 3 years of related experience or equivalent education and experience., • Proficient in basic computer skills, including Word, Excel, and Outlook., • Familiarity with estimating systems, • I-Car certification and computer estimating skills are a must.

Job Description Collision Repair Technician California Collision Center – San Diego, CA Shop Website: californiaccsd.com/locations/san-diego California Collision Center, an independently owned and operated Auto Body Shop with locations in Oceanside, Escondido and Sand Diego is seeking a skilled and motivated Collision Repair Technician to join our team at our San Diego operation. We are a family-owned business offering state-of-the-art facilities and cutting-edge technology to deliver the highest quality collision repair services. If you have a strong background in auto body repair, a passion for quality work, and experience working in a team environment, we want to hear from you! This is a full-time position, Monday through Friday. Responsibilities: • Perform high-quality collision repair and restoration work on various makes and models of vehicles., • Inspect vehicles to assess damage and determine necessary repairs., • Repair or replace damaged vehicle parts, including body panels, frame, and mechanical components., • Use industry-standard equipment and techniques to restore vehicles to pre-accident condition., • Follow detailed repair procedures and manufacturer specifications to ensure repairs meet safety and quality standards., • Work closely with other technicians and shop staff to coordinate repair tasks and ensure a smooth workflow., • Maintain accurate and detailed repair documentation, including labor hours and parts used., • Stay current with automotive repair trends, new technologies, and best practices., • Ensure compliance with safety standards, shop cleanliness, and overall operational efficiency., • Assist with training and mentoring junior technicians when needed., • Communicate with shop management to report on job progress, vehicle status, and any issues that arise. Qualifications: • Previous experience as a collision repair technician or in a similar role is required., • ICAR Certifications are a major plus., • Strong knowledge of automotive repair processes, techniques, and technologies., • Experience with a variety of vehicle makes and models and their specific repair needs., • Ability to work with hand tools, welding equipment, and diagnostic tools., • Strong attention to detail and commitment to high-quality work., • Ability to work independently and as part of a team in a fast-paced environment., • Excellent communication and interpersonal skills to work with customers and colleagues., • Valid driver's license and insurance., • At least 21 years old. If you meet the qualifications and are ready to contribute to the success of a growing company in a dynamic and rewarding role, please submit your resume for consideration. We look forward to hearing from you! Apply today to take the next step in your career with California Collision Center! Requirements • Strong understanding of collision repair processes,, • Experience working with advanced automotive repair equipment and technology., • Must be physically capable of performing manual labor, including lifting, bending, and standing for extended periods., • Ability to meet deadlines and manage multiple tasks effectively., • Detail-oriented with a focus on delivering high-quality repairs., • Competitive pay based on experience, • Paid time off, • Paid holidays, • Professional development opportunities, • Paid uniforms, • Positive work environment and company culture, • Family-owned collision repair facility

Job Description Labor One is hiring Journey-Level Pipe Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: -This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. -The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE: 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES: 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT: -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift only 40 hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Laborers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for supporting mechanics in the accomplishing of production tasks, including the use of small mechanical and hand tools. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Comprehend basic instructions and general correspondence., 2. Be able to clearly communicate verbally to warn others of fire or other danger., 3. Possess the skills required of a Fire Watch., 4. Have experience using small power tools and hand tools in a production environment., 5. Be able to wear clothing appropriate for the task. No exposed jewelry shall be worn while working. Finger nails shall be short. Long hair shall be worn in pony tail or wrapped for protection and should not interfere with hard hat. Ability to wear PPE, especially respirators. DUTIES AND RESPONSIBILITIES 1. Arrive at the designated work site at the assigned time. End the shift as directed by the schedule and your supervisor or mechanic., 2. Work shifts and overtime as assigned the supervisor., 3. Comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 5. If assigned as a fire watch, carry out the duties of a fire watch as delineated in the Fire Watch Labor Category including having a fire watch training card at the work site at all times., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Warn other personnel of danger, or to evacuate, by verbal or other prearranged method of communication. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS INCLUDE: (May be required to demonstrate any or all requirements.) 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 - 30 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. work under the guidance of the Crane Operator and Tender. 1st Shift 40 Hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Insulators for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, the installation and removal of insulation of any component onboard ships. A journeyman measures, cuts and fabricates materials for insulation application to bulkheads, overheads, piping, ducts, machinery, and equipment to minimize heat transfer, prevent moisture condensation, and to deaden sound. Wok is accomplished in all phases of ship repair and modernization of maritime vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, comprehensive knowledge of the insulation craft and the drive to accomplish quality work on schedule. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Musty have a comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to effectively confer job related information to the supervisor, improvers, and helper., 6. Must have experience applying hullboard, Armaflex, Cal-sil, ventilation insulation, and insulation pads., 7. Must have experience fabricating insulation pads., 8. Must have experience using hand and power tools associated with the trade in a safe manner., 9. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 10. Must possess a basic understanding of the metric system., 11. Six (6) years of related experience, three (3) of which must be in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Must arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Must keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals required to accomplish the insulation task., 8. Provide guidance to Improvers and Helpers., 9. Provide Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 10. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 11. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Insulator Helpers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing the installation and removal of insulation of any component onboard ships. A Helper works under the guidance of an Improver, Journeyman, and Supervisor to measure, cuts and fabricates materials for insulation application to bulkheads, overheads, piping, ducts, machinery, and equipment to minimize heat transfer, prevent moisture condensation, and to deaden sound. Work is accomplished in all phases of ship repair and modernization of maritime vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a basic knowledge of procedures and the insulation craft, and the drive to accomplish quality work and learn. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Musty have a basic understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write a report for the supervisor or journeyman describing the material condition of the ship as it pertains to the assigned work item., 5. Must be able to effectively confer job related information to the improver, journeyman, and supervisor., 6. Must have experience using hand and power tools associated with the trade in a safe manner., 7. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 8. Two (2) years of related experience, some of which must be in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Must arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Must keep the work area clean and safe at all times, especially at the end of the shift., 5. Must follow the direction provided by the supervisor, improver, and journeyman., 6. Complete daily work assignments and provide status of unfinished work., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals required to accomplish the insulation task., 8. Assist with providing Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Carry out instructions furnished in written, oral, or diagram form. Work with the supervisor, journeyman, and Improver to resolve, in a professional manner, unexpected events related to your assigned task. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel. 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 4. Work at a variety of levels and positions (ex. Waist, eye, above head)., 5. Good balance while working on uneven surfaces and maneuvering obstacles., 6. Sufficient handgrip and coordination to carry and operate tools and equipment., 7. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd shift 40 hours a week; overtime with supervisors approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Job description: Essential Duties and Responsibilities • Ensures proper vehicle tear down, • Determine repair time allotments and required labor operations, • Makes accurate repair/replace decisions, • Assess and applies pre-existing damage, completes accurate total loss evaluations, • Negotiates agreed price with shop decision maker and sets time bound expected completion date per Loya insurance standards, • Review and assess the validity of all supplement request, • Proactively provides customers with information regarding their vehicle’s cost of repair estimate and explains claims/repair process, • Maintains accurate vehicle’s cost of repair estimate and explains claims/repair process, • Completes timely estimates, supplements, and inspections, • Negotiates advanced fees for tow, tear down, and storage on all vehicles that are determined to a financial total loss at a repair facility or tow yard, • Adhere to our fleet policy, • Provide extraordinary customer service to all parties involved in the claims process, • Other duties as assigned by management or as needed. Qualifications/Requirements • Ideal candidate will have a minimum of 2 to 3 years of relevant work experience, • Relevant experience includes work as a claims adjuster, property damage adjuster, or repair work within automobile repair and/or body shop, • High School diploma; Degree or college coursework is a plus, • CCC One experience, • Must have a clean background and driving record Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off #Claims REQ. 738442634 Company DescriptionFred Loya Insurance is a family-owned auto insurance company founded in 1974 by Fred Loya in El Paso, Texas. Over the years, the company has grown significantly and now operates over 700 agencies across several states, including Arizona, California, Colorado, Georgia, Illinois, Indiana, Nevada, New Mexico, Alabama, Ohio, and Texas. Be part of a fast-growing company committed to service and excellence. Work in a supportive and dynamic environment with opportunities for growth and development. If you are a dedicated professional looking to make a difference, we encourage you to apply!Fred Loya Insurance is a family-owned auto insurance company founded in 1974 by Fred Loya in El Paso, Texas. Over the years, the company has grown significantly and now operates over 700 agencies across several states, including Arizona, California, Colorado, Georgia, Illinois, Indiana, Nevada, New Mexico, Alabama, Ohio, and Texas.\r\nBe part of a fast-growing company committed to service and excellence.\r\nWork in a supportive and dynamic environment with opportunities for growth and development.\r\nIf you are a dedicated professional looking to make a difference, we encourage you to apply!

Job Description Labor One is hiring Firewatch for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for fire prevention and fire protection at the assigned work site. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Comprehend basic instructions and general correspondence., 2. Be able to clearly communicate verbally to warn others of fire or other danger., 3. Understand the hazards associated with fixed and portable fire protection systems and the manner in which the systems are activated., 4. Understanding of proper use and care of fixed and portable fire protection systems., 5. Understand the Shipyard Competent Person Report, and where to find it., 6. Know the types of fire, the materials involved, and the type of fire extinguisher needed to suppress the fire., 7. Possess a Fire Watch training card., 8. Be able to wear clothing appropriate for the task. No exposed jewelry shall be worn while working. Finger nails shall be short. Long hair shall be worn in pony tail or wrapped for protection and should not interfere with hard hat. Ability to wear PPE, especially respirators. DUTIES AND RESPONSIBILITIES 1. Have Fire Watch Training card with them at all times in the shipyard., 2. Carry out Fire Watch procedures to protect personnel and customer and BAE property from fire damage., 3. Ensure that designated hot work area is clean and free of combustible materials before hot work commences., 4. Keep your work area clean and safe at all times, especially at the end of the shift., 5. Warn other personnel of danger, or to evacuate, by verbal or other prearranged method of communication., 6. Show initiative and ownership of work and work area., 7. Adhere to all safety rules and good work ethics. Be accountable for completion of work assignments., 8. Arrive at the designated work site at the assigned time. End the shift as directed by the schedule and your supervisor or journeyman., 9. Work shifts and overtime as assigned the supervisor., 10. Comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 11. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. Work Tasks Include: a) Ensure that designated hot work area is clean and free of combustible materials before hot work is started. b) Carry an appropriately rated fire extinguisher to the assigned watch area. Make certain the fire extinguisher is in operable shape and not discharged prior to allowing hot work to start. c) Notify the person accomplishing the hot work if it is safe to proceed and when there is danger. d) Suppress fires when they occur. e) Report any uncorrected unsafe condition or working habits to the journeyman and supervisor. f) Assist with the hot work procedure and audits process making certain hot work notifications are in place and valid before hot work commences. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS INCLUDE: (May be required to demonstrate any or all requirements.) 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 - 30 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head). 6. Good balance while working on uneven surfaces and maneuvering obstacles., 6. Sufficient handgrip and coordination to carry and operate tools and equipment., 7. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 hours per week; Overtime with supervisor approval. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Pipefitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications, NAVSEA/Military standards and drawings or other regulatory body standards such as ABS, Military Sealift Command, etc. Repair and fabrication include the use of various shop equipment such as table saws, pipe threading machines, bending machines (power as well as hand operated), drill presses and brazing equipment. Additional tasks associated with this position include blanking and pressure testing of tanks (structural boundary testing). The journeyman is also responsible for providing direction to improvers and helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found reports in writing that include recommended corrective action., 5. Must have a thorough knowledge of experience with P-73 joint fit-up., 6. Must have a comprehensive knowledge of Silver Brazing theory., 8. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 9. Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting., 10. Must be able to operate and care for equipment, portable power tools, and hand tools used to accomplish assigned work., 11. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 12. Must have six (6) years of pipefitting experience, four (3) of which in the maritime repair environment. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipefitter Improver and Helper if assigned., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and shipyard's best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for work, taking special care if hot work is required. Verify gas free certifications and tag-outs, before commencing any work. b. Run lines and leads required to accomplish work. Accomplish drop test if using flammable or oxygen depleting gases. c. Inspect work for defects before turning the job over to welders. Correct fit-ups as required.. Confer with supervision before correcting deficiencies. d. Document existing conditions before commencing work using Condition Found Reports (CFR). e. Remove damaged pipe in accordance with drawings and specifications. f. Measure or template pipe for fabrication. g. Blank systems in accordance with standard Item 009-24 or other applicable safety standards. h. Fit up new pipe using the proper fit up type in accordance with specifications. i. Ensure a strain free fit-up to pumps or other connecting equipment. j. Blank tanks and accomplish boundary air tests. k. Accomplish or verify Lock-out Tag-out requirements before commencing. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 75 lbs on an occasional basis (0-25% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (25-75% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift only 40 hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Job title: Dental Assistant Reports to: Director of Clinical Operations Status: Full-Time Location/s: Mira Mesa 10737 Camino Ruiz Suite 235, San Diego, CA 92126 The Organization Operation Samahan (OpSam Health) is a Federally Qualified Health Center (FQHC) that serves the San Diego County community. Founded in 1973 in a barber shop in Downtown San Diego by Filipino health professionals offering services to immigrants who did not have the finances, linguistic skills, or ability to navigate the health care system. Today, Operation Samahan has evolved into a diverse community health center with services available in National City, Mira Mesa, City Heights, and Rancho Penasquitos. We provide primary care, dental, behavioral health, family planning, integrative health and wellness, healthy eating, civic engagement, and other health-related services to the uninsured, underinsured, and underserved families of all income levels, regardless of their ability to pay. JOB PURPOSE Prepare the patient for the determined treatment and assist the dentist in performing treatments. Prepare materials and equipment for treatment and have them ready for the dentist's use. Take x-rays and assist the dentist in laboratory work. The Dental Assistant is also responsible for sterilizing, preparing, and controlling the inventory of dental instruments and supplies. ESSENTIAL DUTIES AND RESPONSIBILITIES Administration: • Assist patients in resolving minor difficulties, answering their questions, and giving directions to patients as authorized by the dentist., • Serves as dentist's chair-side assistant., • Prepares operatory for patient treatment as per Dental Department protocols and the dentist’s directions., • Takes digital dental radiographs in accordance with state regulations and law as well as Dental Department directives and protocol., • Performs independent procedures as delegated and directed by the dentist in accordance with state regulation and law and the Dental Department directive and protocol., • Process, pull, and file patient charts as required., • Receives and places necessary telephone calls consistent with professional matters, clinic business, and patient care of the Dental Department., • Assists with various clinical and administrative functions of the center as appropriate and as time permits., • Insures the sterility of all reusable dental instruments and equipment in accordance with Dental Department directives and protocol., • Insures the proper disposal of all contaminated or potentially contaminated materials in accordance with Dental Department directive, center policy as well as state and federal regulation(s)., • Performs all functions in full compliance with the center's and the Dental Department Exposure Control Plan including but not limited to the use of Personal Protective Equipment and Universal Precautions., • Participates in appropriate health promotion/disease prevention activities, both on-site and off-site as required., • Responsible for personal compliance in full with all applicable federal, state, local, and center rules, regulations, protocols, and procedures including but not limited to the participation of a Dental Assistant in the provision of clinical dental care, as well as those relating to, but not limited to personnel issues, workplace safety, public health and confidentiality. Maintenance: • Maintains Dental Department euipment in accordance with the manufacturer's directions and Dental Department policy and protocol., • Maintains all Dental Department areas in compliance with Dental Department directives and protocols as well as center policies and procedures relative to infection control exposure control and safety issues., • Maintains adequate operatory supplies and compiles a list of individual item shortages for inventory control and ordering purposes., • Maintains a list of all Dental Department patients monitors patient flow and assists the Dentist in assuring that all patient records and documents are properly and accurately completed and filed. Quality Management: • Contribute to the success of the organization by participating in quality improvement activities. Customer Relations: • Maintain professional working relationships with all levels of staff, clients, and the public., • Be a team player and cooperate in accomplishing department goals and objectives. Safety: • Maintain current knowledge of policies and procedures as they relate to safe work practices., • Follow all safety procedures and report unsafe conditions., • Know the location of the nearest fire extinguisher and emergency exits. HIPAA/Compliance: • Maintain privacy of all patient, employee, and volunteer information and access such information only on a need-to-know basis for business purposes., • Comply with all regulations regarding corporate integrity and security obligations. Report unethical, fraudulent, or unlawful behavior or activity. QUALIFICATIONS Knowledge, Skills, and Abilities: • Excellent communication skills and be able to listen to the patient's concerns and problems with interest and empathy as well as being able to articulately explain any problems to management., • Must have a high level of organizational skills., • Ability to develop and maintain positive interpersonal relationships with a variety of people., • Complete many different duties, often changing from one task to another of a different nature without loss of efficiency or composure., • Must be able to work under stress when confronted with critical or unusual situations., • Must be able to follow instructions explicitly., • Demonstrates ability to exercise analytic ability and use sound judgment. Required Education and Certifications: • High School Diploma, • Dental Assistant Certificate including the following:, • Pit and Fissure Sealant, Coronal Polishing and Ultrasonic Scaling Certification., • Proof of completing the radiation safety course, • 3 CE Units OSHA and Infection Control, HIPAA (every 2 years), • Current CPR certification (every 2 years) Other Requirements: • Have reliable transportation; a clean driving record, and car insurance as required by the state, • Multilingual preferred PHYSICAL DEMANDS • Normal office and dental center environment., • Prolonged sitting or standing may be required., • Physical movements and the degree of mobility, manual dexterity, and hand-eye coordination normally associated with dental assisting in general practice dentistry will be performed on a repetitive basis., • The ability to distinguish letters and symbols as well as the ability to utilize telephones, computer terminals, and copiers is required., • Work under stressful conditions as well as irregular hours may be required. $21.00 – $30.00 per hour based on experience and registration status

Job Description Job title Nurse Practitioner – Family Medicine (Tagalog Speaker) Reports to Medical Director Department: Medical Status: Full-Time (Exempt) Locations: National City, 2743 Highland Avenue, National City CA 91950 The Organization Operation Samahan (OpSam Health) is a Federally Qualified Health Center (FQHC) that serves the San Diego County community. It was founded in 1973 in a barber shop in Downtown San Diego by Filipino health professionals offering services to immigrants who did not have the finances, linguistic skills, or ability to navigate the health care system. Today, Operation Samahan has evolved into a diverse community health center with services available in National City, Mira Mesa, City Heights, and Rancho Penasquitos. We provide primary care, dental, behavioral health, family planning, integrative health and wellness, healthy eating, civic engagement, and other health-related services to the uninsured, underinsured, and underserved families of all income levels, regardless of their ability to pay. JOB PURPOSE As a Nurse Practitioner at a Federally Qualified Health Center (FQHC), you will be an integral part of the healthcare team, working under the guidance of the Medical Director. Your role involves providing comprehensive direct patient care services to individuals of diverse backgrounds and needs. This includes conducting thorough assessments, diagnosing illnesses, developing treatment plans, and prescribing medications when necessary. Additionally, you will play a crucial role in preventive care, health promotion, and patient education. Your dedication to compassionate, evidence-based practice will significantly fulfill Opsam Health's mission of providing accessible, high-quality healthcare to underserved populations. ESSENTIAL DUTIES AND RESPONSIBILITIES • Perform comprehensive health screenings of patients of all ages., • Provides health care services to patients with acute and chronic medical conditions., • Order and review diagnostic and laboratory tests and refer patients to specialists as appropriate., • Complete progress notes in the electronic health record system in a timely manner., • Follow Opsam Health policies., • Keep abreast of current evidence-based medical knowledge., • Maintains minimum productivity requirements as set by the organization., • Maintains satisfactory peer and performance reviews., • Participate in quality improvement projects., • Performs other duties as assigned. QUALIFICATIONS • Valid Registered Nurse (RN) license and Family Nurse Practitioner (FNP) certification in the state of California., • Bilingual in Tagalog/English preferred, • Master's degree in nursing (MSN) from an accredited program with a focus on family practice., • Current DEA and BLS certificates are required., • Minimum of 1 year of experience as a Family Nurse Practitioner in a primary care or family practice setting., • Strong knowledge and proficiency in primary care, including health assessment, diagnosis, treatment, and patient education., • Must be COMFORTABLE with all age groups. Quality Management: • Display knowledge of typical signs of human development and ability to assess and provide age-appropriate clinical care., • Contribute to the organization's success by participating in quality improvement activities. Customer Relations: • Respond promptly and with caring actions to patient care needs. Acknowledge psychosocial and cultural beliefs., • Maintain professional working relationships with all levels of staff, patients and the public., • Be part of a team and cooperate to accomplish department goals and objectives. Safety: • Maintain current knowledge of policies and procedures as they relate to safe work practices., • Follow all safety procedures and report unsafe conditions., • Use appropriate body mechanics to ensure an injury-free environment., • Be familiar with the location of the nearest fire extinguisher and emergency exits., • Follow all infection control procedures, including blood-borne pathogen protocols. Privacy Protection & HIPPA Compliance: • Maintain privacy of all patients, employees, and volunteer information and access such information only on a need-to-know basis for business purposes., • Comply with all regulations regarding corporate integrity and security obligations. Report unethical, fraudulent, or unlawful behavior or activity. OTHER DUTIES This job description is not designed to cover or contain a comprehensive listing of the activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. 44 Salary: $70.00 - $90.00

Job Description Job title Nurse Practitioner – Family Medicine (Tagalog Speaker) Reports to Medical Director Department: Medical Status: Full-Time (Exempt) Locations: Mira Mesa 10737 Camino Ruiz Suite 235, San Diego, CA 92126 The Organization Operation Samahan (OpSam Health) is a Federally Qualified Health Center (FQHC) that serves the San Diego County community. It was founded in 1973 in a barber shop in Downtown San Diego by Filipino health professionals offering services to immigrants who did not have the finances, linguistic skills, or ability to navigate the health care system. Today, Operation Samahan has evolved into a diverse community health center with services available in National City, Mira Mesa, City Heights, and Rancho Penasquitos. We provide primary care, dental, behavioral health, family planning, integrative health and wellness, healthy eating, civic engagement, and other health-related services to the uninsured, underinsured, and underserved families of all income levels, regardless of their ability to pay. JOB PURPOSE As a Nurse Practitioner at a Federally Qualified Health Center (FQHC), you will be an integral part of the healthcare team, working under the guidance of the Medical Director. Your role involves providing comprehensive direct patient care services to individuals of diverse backgrounds and needs. This includes conducting thorough assessments, diagnosing illnesses, developing treatment plans, and prescribing medications when necessary. Additionally, you will play a crucial role in preventive care, health promotion, and patient education. Your dedication to compassionate, evidence-based practice will significantly fulfill Opsam Health's mission of providing accessible, high-quality healthcare to underserved populations. ESSENTIAL DUTIES AND RESPONSIBILITIES • Perform comprehensive health screenings of patients of all ages., • Provides health care services to patients with acute and chronic medical conditions., • Order and review diagnostic and laboratory tests and refer patients to specialists as appropriate., • Complete progress notes in the electronic health record system in a timely manner., • Follow Opsam Health policies., • Keep abreast of current evidence-based medical knowledge., • Maintains minimum productivity requirements as set by the organization., • Maintains satisfactory peer and performance reviews., • Participate in quality improvement projects., • Performs other duties as assigned. QUALIFICATIONS • Valid Registered Nurse (RN) license and Family Nurse Practitioner (FNP) certification in the state of California., • Bilingual in Tagalog/English preferred, • Master's degree in nursing (MSN) from an accredited program with a focus on family practice., • Current DEA and BLS certificates are required., • Minimum of 1 year of experience as a Family Nurse Practitioner in a primary care or family practice setting., • Strong knowledge and proficiency in primary care, including health assessment, diagnosis, treatment, and patient education., • Must be COMFORTABLE with all age groups. Quality Management: • Display knowledge of typical signs of human development and ability to assess and provide age-appropriate clinical care., • Contribute to the organization's success by participating in quality improvement activities. Customer Relations: • Respond promptly and with caring actions to patient care needs. Acknowledge psychosocial and cultural beliefs., • Maintain professional working relationships with all levels of staff, patients and the public., • Be part of a team and cooperate to accomplish department goals and objectives. Safety: • Maintain current knowledge of policies and procedures as they relate to safe work practices., • Follow all safety procedures and report unsafe conditions., • Use appropriate body mechanics to ensure an injury-free environment., • Be familiar with the location of the nearest fire extinguisher and emergency exits., • Follow all infection control procedures, including blood-borne pathogen protocols. Privacy Protection & HIPPA Compliance: • Maintain privacy of all patients, employees, and volunteer information and access such information only on a need-to-know basis for business purposes., • Comply with all regulations regarding corporate integrity and security obligations. Report unethical, fraudulent, or unlawful behavior or activity. OTHER DUTIES This job description is not designed to cover or contain a comprehensive listing of the activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. 44 Salary: $70.00 - $90.00 *The posted annual salary varies and depends on several factors, including the candidate’s education, work experience, skills, and certifications related to the position. Being bilingual in Spanish is a plus.

Job Description Job title: Dental Assistant Reports to: Director of Clinical Operations Status: Full-Time Location/s: Mira Mesa, 10737 Camino Ruiz, Suite 235 San Diego CA 92126 The Organization Operation Samahan (OpSam Health) is a Federally Qualified Health Center (FQHC) that serves the San Diego County community. Founded in 1973 in a barber shop in Downtown San Diego by Filipino health professionals offering services to immigrants who did not have the finances, linguistic skills, or ability to navigate the health care system. Today, Operation Samahan has evolved into a diverse community health center with services available in National City, Mira Mesa, City Heights, and Rancho Penasquitos. We provide primary care, dental, behavioral health, family planning, integrative health and wellness, healthy eating, civic engagement, and other health-related services to the uninsured, underinsured, and underserved families of all income levels, regardless of their ability to pay. JOB PURPOSE Prepare the patient for the determined treatment and assist the dentist in performing treatments. Prepare materials and equipment for treatment and have them ready for the dentist's use. Take x-rays and assist the dentist in laboratory work. The Dental Assistant is also responsible for sterilizing, preparing, and controlling the inventory of dental instruments and supplies. ESSENTIAL DUTIES AND RESPONSIBILITIES Administration: • Assist patients in resolving minor difficulties, answering their questions, and giving directions to patients as authorized by the dentist., • Serves as dentist's chair-side assistant., • Prepares operatory for patient treatment as per Dental Department protocols and the dentist’s directions., • Takes digital dental radiographs in accordance with state regulations and law as well as Dental Department directives and protocol., • Performs independent procedures as delegated and directed by the dentist in accordance with state regulation and law and the Dental Department directive and protocol., • Process, pull, and file patient charts as required., • Receives and places necessary telephone calls consistent with professional matters, clinic business, and patient care of the Dental Department., • Assists with various clinical and administrative functions of the center as appropriate and as time permits., • Insures the sterility of all reusable dental instruments and equipment in accordance with Dental Department directives and protocol., • Insures the proper disposal of all contaminated or potentially contaminated materials in accordance with Dental Department directive, center policy as well as state and federal regulation(s)., • Performs all functions in full compliance with the center's and the Dental Department Exposure Control Plan including but not limited to the use of Personal Protective Equipment and Universal Precautions., • Participates in appropriate health promotion/disease prevention activities, both on-site and off-site as required., • Responsible for personal compliance in full with all applicable federal, state, local, and center rules, regulations, protocols, and procedures including but not limited to the participation of a Dental Assistant in the provision of clinical dental care, as well as those relating to, but not limited to personnel issues, workplace safety, public health and confidentiality. Maintenance: • Maintains Dental Department equipment in accordance with the manufacturer's directions and Dental Department policy and protocol., • Maintains all Dental Department areas in compliance with Dental Department directives and protocols as well as center policies and procedures relative to infection control exposure control and safety issues., • Maintains adequate operatory supplies and compiles a list of individual item shortages for inventory control and ordering purposes., • Maintains a list of all Dental Department patients monitors patient flow and assists the Dentist in assuring that all patient records and documents are properly and accurately completed and filed. Quality Management: • Contribute to the success of the organization by participating in quality improvement activities. Customer Relations: • Maintain professional working relationships with all levels of staff, clients, and the public., • Be a team player and cooperate in accomplishing department goals and objectives. Safety: • Maintain current knowledge of policies and procedures as they relate to safe work practices., • Follow all safety procedures and report unsafe conditions., • Know the location of the nearest fire extinguisher and emergency exits. HIPAA/Compliance: • Maintain privacy of all patient, employee, and volunteer information and access such information only on a need-to-know basis for business purposes., • Comply with all regulations regarding corporate integrity and security obligations. Report unethical, fraudulent, or unlawful behavior or activity. QUALIFICATIONS Knowledge, Skills, and Abilities: • Excellent communication skills and be able to listen to the patient's concerns and problems with interest and empathy as well as being able to articulately explain any problems to management., • Must have a high level of organizational skills., • Ability to develop and maintain positive interpersonal relationships with a variety of people., • Complete many different duties, often changing from one task to another of a different nature without loss of efficiency or composure., • Must be able to work under stress when confronted with critical or unusual situations., • Must be able to follow instructions explicitly., • Demonstrates ability to exercise analytic ability and use sound judgment. Required Education and Certifications: • High School Diploma, • Dental Assistant Certificate including the following:, • Pit and Fissure Sealant, Coronal Polishing and Ultrasonic Scaling Certification., • Proof of completing the radiation safety course, • 3 CE Units OSHA and Infection Control, HIPAA (every 2 years), • Current CPR certification (every 2 years) Other Requirements: • Have reliable transportation; a clean driving record, and car insurance as required by the state, • Multilingual preferred PHYSICAL DEMANDS • Normal office and dental center environment., • Prolonged sitting or standing may be required., • Physical movements and the degree of mobility, manual dexterity, and hand-eye coordination normally associated with dental assisting in general practice dentistry will be performed on a repetitive basis., • The ability to distinguish letters and symbols as well as the ability to utilize telephones, computer terminals, and copiers is required., • Work under stressful conditions as well as irregular hours may be required. $21.00 – $30.00 per hour based on experience and registration status

Job Description Labor One is hiring Journey-Level Structural Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 7. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 8. Must possess a working knowledge of welding equipment and work processes used in marine welding., 9. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 10. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 11. Must understand the US customary and metric measurement system., 12. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments. 6. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 9. Carry out written or oral instructions. Confer with the supervisor to resolve unexpected events related to your assigned task. Work Tasks Include: a. Prepare work area for hot work, including checking hot work certifications at the work site and adjacent areas. b. Prepare surfaces for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions. e. Become familiar with applicable safety requirements before commencing work. f. Ensure Lock-out Tag-out has been correctly accomplished. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day). 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day). 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel. 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps). 5. Work at a variety of levels and positions (ex. Waist, eye, above head). 6. Good balance while working on uneven surfaces and maneuvering obstacles. 7. Sufficient handgrip and coordination to carry and operate tools and equipment. 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day). 9. Respond to visual, verbal, and audible sounds/commands. 10. Work at heights above 12' from ladders, scaffolding, and manlifts. 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 3rd Shift 40 Hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description A body repair technician is able to repair vehicle bodies and straighten vehicle frames. Our shop specializes in larger fleet box trucks, but we also work on smaller cars and vehicles often. RESPONSIBILITIES Thoroughly examine the vehicle damages Return the vehicle back to factory specifications Remove vehicle trim to gain access to vehicle body Replace body panels, corners, or other parts Can properly fill depressions with body filler and insure a quality repair Able to remove damaged parts using power tools and cutting torch Bolt or weld replacement parts in position using power tools and welding equipment Straighten bent automobile frames File, grind and sand repaired surfaces, using power tools and hand tools Aim headlights Replace bolts on panels and align properly Make cosmetic repairs Perform other duties as assigned by management Use special equipment to restore damaged metal frames and body sections back to original specifications Able to develop appropriate and efficient methods for each job Helping to prepare and mask vehicles for paint COMPETENCIES/SKILLS Drivers License, to assist in delivering vehicles on occasion. 1-4 years body shop experience strongly preferred. Effective communication (written and verbal) and interpersonal skills required. Ability to adapt to and work effectively within a constantly changing environment. Excellent problem solving skills required. Product Knowledge PHYSICAL DEMANDS Ability to sit or stand for prolonged periods of time Ability to perform repetitive tasks; manual dexterity Vision abilities required include close, distance and depth perception Lifting heavy objects Willing to accept applications for new and less skilled workers as well, so long as you are willing to learn and develop.

Job Description Natilus is seeking a Tooling Design Engineer to join the manufacturing team in San Diego, CA. Your primary task would be designing and overseeing the fabrication of assembly tooling components and jigs. At Natilus, we work with a small team of highly adaptable engineers which enables us to accomplish the tasks of a much larger team. This gives you the opportunity to branch out into other technical disciplines such as mechanisms, manufacturing, stress analysis and tooling design as well as participate in the entire cradle-to-grave design process of multiple aircraft. Natilus is currently building a large 19,000lb unmanned aerial vehicle powered by twin turbo props. Our aircraft is a blended wing body with the sole purpose of carrying cargo. Making history utilizing multiple new technologies, it will be the first of its kind to fly and be put into production. The position is based out of San Diego and requires 20% travel. US Citzens or Permanent Residents may apply. Requirements • Experience planning, designing and overseeing tools for locating and assembling parts and sub-assemblies, • Understanding of critical reference points, surfaces, locators and tooling holes to establish coordination between parts and assemblies, • Well versed in machine shop theory, practices and breakdown of jigs & fixtures, • Determines method and sequence of fabrication, assembly and final setup of assembly components, • Extensive knowledge doing tolerance stack-up analysis, • Proficiency in NX, CATIA, Unigraphics, or Solidworks, • A minimum of five years tooling design or directly related work experience, • Capable of reviewing design details and suggesting changes toward ease or economy of manufacturing, • Experience with design as build manufacturing and using metrology for determinate assembly, • Comfortable setting up and operating power machine tools and accessories for machining of tools and dies, • Aircraft homebuilding or other hands-on design or build experience, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays)

Job DescriptionLabor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd shift only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Outside Machinists for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial. The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to work from Process Control Procedures (PCP)., 6. Must be able to use precision measurement tools., 7. Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers., 8. Must be able to interpret drawings, sketches, tech manuals, and user manuals to the extent necessary to remove, repair, and install equipment., 9. Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks., 10. Must have a comprehensive understanding of Lock-out / Tag-out procedures., 11. Must understand laser alignment., 12. Must understand reverse indicator alignment procedures., 13. Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system., 15. Six (6) years of machinist experience, two (2) of which in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor. 3. Work shifts and overtime as assigned., 3. Keep the work area clean and safe at all times, especially at the end of the shift., 4. Complete work assignments as scheduled and provide status of unfinished work for shift turnover., 5. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 6. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that personnel may encounter every day in the course of performing work on ships, piers, docks. While performing the duties of this position the employee is regularly required to: stand; walk; use hands and fingers to handle directly or work from touch; reach out with arms; climb; stoop; kneel; crouch; crawl; and communicate in a loud environment. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: Candidates may be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Shipfitter Helpers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:This position is responsible for assisting with steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges while under the supervision of a supervisor and/or journeyman / 1st Class shipfitter. The position requires a basic understanding of structural repair procedures and a strong aptitude and ability to follow directions. The individual must possess knowledge of ship terminology, measurements, and the ability to read job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions and general correspondence., 2. Working understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to effectively communicate issues encountered during the job that are in conflict with the directions provided by the supervisor or journeyman / 1st class fitter., 5. Ability to read and interpret structural drawings, including weld symbols., 6. Basic understanding of hand and power tools used by shipfitters including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 7. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 8. Up to one (1) year of experience in a heavy industry. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, before commencing work., 6. Complete daily work assignments and provide status of unfinished work to the journeyman or supervisor., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment. 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Outside Machinist Improvers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial. The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have basic print (drawing) reading and interpretation skills., 3. Must have a working understanding of ship repair terminology and ship compartment location nomenclature., 4. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 5. Must be able to write reports describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 6. Must be able to work from Process Control Procedures (PCP)., 7. Must be able to use precision measurement tools., 8. Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers., 9. Must have a basic understanding of drawings, sketches, tech manuals, and user manuals., 10. Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks., 11. Must have a comprehensive understanding of Lock-out / Tag-out procedures., 12. Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work., 13. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system., 14. Three (3) years of machinist experience, preferably one (1) of which is in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Keep the work area clean and safe at all times, especially at the end of the shift., 5. Complete work assignments as scheduled and provide status of unfinished work for shift turnover., 6. Assist with the preparation of Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 8. Receive technical guidance and carry out directions from a Journeyman or Supervisor., 9. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: a. Prepare a safe work area especially as it relates to fire prevention. b. Assist in the coordinate work with other crafts to disconnect and remove equipment. c. Compile as-found reports identifying the status of equipment prior to work. d. Assist with in-place valve repairs. e. Assist with material take offs with adequate information for ordering. f. Assist with equipment alignment. g. Assist with operational tests. h. Keep blanking logs up to date. i. Run and remove lines and leads as required to accomplish work and in accordance with OSHA and the shipyards safety standards. j. Assist with Lock-out Tag-out activities for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that personnel may encounter every day in the course of performing work on ships, piers, docks. While performing the duties of this position the employee is regularly required to: stand; walk; use hands and fingers to handle directly or work from touch; reach out with arms; climb; stoop; kneel; crouch; crawl; and communicate in a loud environment. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: Candidates may be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 hours a week. Overtime with Supervisors approval. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st shift 40 hours per week/OT per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionBefore applying to this job opening, please review the Company's Applicant Privacy Policy located at: This Applicant Privacy Policy governs the Company's collection, use, and sharing of personal information you provide during the application process. Service Lot Porter - Kearny Mesa Subaru/Genesis Non-Exempt Job Summary: The Service Lot Attendant is responsible for organizing and managing the vehicles in the service lot, assisting customers, and supporting the service department's daily operations. This role ensures that vehicles are properly parked, serviced, and ready for customer pickup, contributing to an efficient workflow and a positive customer experience. Essential Functions: • Drive, park and retrieve customer vehicles in the service lot efficiently and safely., • Ensure vehicles are parked in designated areas and organized according to dealership policies., • Monitor vehicle movement and assist in moving vehicles as needed for service or storage., • Greet customers in a friendly and professional manner when they drop off or pick up their vehicles., • Provide basic information about the status of vehicles and estimated completion times., • Assist customers with locating their vehicles or providing shuttle service as needed., • Assist service technicians by moving vehicles to and from service bays., • Ensure that service paperwork and keys are properly managed and returned to the appropriate locations., • Keep the service lot clean and organized, including removing trash and debris., • Monitor the lot for any signs of security issues or damage to vehicles., • Report any suspicious activities or damage to vehicles to the service manager., • Follow all safety protocols when moving vehicles and using equipment., • Update vehicle status records and assist in maintaining accurate service logs., • Support the service department with various administrative tasks as needed., • Assist in maintaining an accurate inventory of service tools and equipment., • Work closely with service advisors, technicians, and other staff to ensure smooth operations., • Communicate effectively with team members and provide assistance as required., • Maintain satisfactory attendance. Minimum Qualifications: • Valid driver’s license and safe driving record; required to have California driver's license within 30 days following date of hire., • Ability to lift up to 30 pounds., • Ability to perform all essential functions of the job description. Preferred Qualifications: • Previous experience working in an automotive dealership, body shop, or similar environment., • Experience driving both manual and automatic transmission vehicles., • Strong attention to detail and commitment to vehicle cleanliness and presentation., • Familiarity with vehicle check-in/check-out procedures and documentation., • Ability to safely operate and maneuver vehicles in tight or high-traffic areas., • Basic knowledge of automotive terminology and vehicle features., • Excellent customer service and communication skills., • Ability to work independently and as part of a team in a fast-paced environment., • Ability to follow instructions, prioritize tasks, and manage time efficiently. Environment/Noise: • May occasionally walk on slippery surfaces., • Work is performed in a parking lot environment, which may include exposure to varying weather conditions. Employee Benefits Include: • Medical, Dental, & Vision Insurance, • Employer Paid Life Insurance, • Employer Paid AD&D, • 401k (with Employer match), • Generous Vacation Package, • Inter-Company Transfers and Promotion Opportunities, • Tenure recognition and awards, • Vehicle Purchase Discount Program, • Vehicle Service Discount Program, • Golf Benefits at Maderas Golf Club (subject to qualification) If you receive an offer of employment, it will be a conditional offer contingent on the successful completion of a pre-employment drug screen and background check. Sunroad is committed to providing reasonable accommodations to qualified individuals with disabilities to ensure equal employment opportunities and access to all programs, services, and activities. If you require accommodations to participate in the application process or to perform the essential functions of the job, please contact the HR Department to discuss your needs confidentially. We will work with you to identify appropriate accommodations based on your specific circumstances and in compliance with applicable laws. We are an Equal Opportunity Employer (M/F/D/V) and maintain a drug-free workplace. If you receive an offer of employment, it will be a conditional offer contingent on the successful completion of a pre-employment drug screen and background check. Sunroad is an Equal Employment opportunity and Affirmative Action Employer. We are committed to providing equal opportunity in all of our employment practices, including selection, race (including traits historically associated with race such as hair texture and protective hairstyles such as braids, locks, and twists); religion; religious creed; religious dress/grooming; color; age (40 and over); sex; sexual orientation; gender; gender identity (meaning a person’s identification as male, female, a gender different from the person’s sex at birth, or transgender); gender expression (including a person’s gender-related appearance or behavior, whether or not stereotypically associated with the person’s sex at birth); national origin; ancestry; citizenship status; uniform service member status; military or veteran status; marital status; pregnancy; childbirth; medical conditions related to pregnancy, childbirth, or breast feeding; medical condition (including cancer related or HIV/AIDS related); handicap; physical disability; mental disability; genetic characteristics; genetic information; or any other protected status in accordance with the requirements of all federal, state and local laws. Our Equal Employment Opportunity Policy applies equally to interns and volunteers. Company DescriptionFounded in 1977, Sunroad Enterprises is a diversified holding company based in San Diego. Sunroad consists of three distinct divisions: Automotive, Real Estate and Maderas Golf. With successful ventures across multiple countries, we bring a strategic focus to seeing developments come to life. Sunroad Enterprises is one of the largest minority-owned businesses in San Diego and has earned numerous quality commendations from local, regional, and national organizations. Please visit our website to learn more about our endeavors and career opportunities: in 1977, Sunroad Enterprises is a diversified holding company based in San Diego. Sunroad consists of three distinct divisions: Automotive, Real Estate and Maderas Golf. With successful ventures across multiple countries, we bring a strategic focus to seeing developments come to life. Sunroad Enterprises is one of the largest minority-owned businesses in San Diego and has earned numerous quality commendations from local, regional, and national organizations. Please visit our website to learn more about our endeavors and career opportunities:

Job DescriptionBoarhog LLC is seeking a conscientious, diligent, thorough, detail-oriented Full Cycle Job Cost Bookkeeper/Accountant who may work remotely as well as in Boarhog's office in San Diego. This is a full time position performing accounting functions including Accounts Receivable (A/R), payroll, timecards, bank reconciliations, credit card reconciliations, expense reports and monthly close of books, including the specific following elements:1) Invoice Generation and Tracking: Creating and distributing invoices to customers and tracking their status.2) Payment Recording: Recording payments received from customers and applying them to the appropriate invoices.3) Reconciliation: Reconciling A/R records with bank statements and other financial data.4) Aging Reports: Analyzing A/R data to track and identify outstanding invoices and assess the risk of non-payment.5) Collections: Following up with customers on overdue invoices and implementing collection procedures. The Bookkeeper/Accountant is expected to dependably and reliably perform the following :1) Manage Boarhog’s Quickbooks, perform data entry of banking transactions, accounts payable, credit card transactions, sync timecards through HTS into Quickbooks and verify accuracy of timecards with Management, and complete reconciliations.2) Set up new employees and update current employees in T-Sheets for job codes and payroll; will work closely with Office Admin to verify employee information needed in accounting system and timekeeping system.3) Meticulously prepare invoices for various contracts and submit to customers in a timely manner, then track accounts receivable and produce an accurate and complete aging report.4) Process payroll and reconcile to timecards and books with proper job costing of labor and expenses5) Review of expense reports submitted for per diem and math; verify employee time to corresponding travel6) Assist with spend plans and monthly status reports with financial inputs to customers and reconcile to billing Successful performance includes:1) Processing payroll twice a month by importing timesheet information into Quickbooks2) Timely identification and resolution of timesheet discrepancies, then collaborate with the Director of Operations to address unresolved discrepancies toward ensuring accuracy and completeness.3) Proactively add and remove associates in the timesheet system to include assigning the appropriate charge codes4) Track and maintain accurate and complete PTO balances.5) Process expense reports, verify per diems and review for accuracy6) Assure the Director of Operations that Boarhog associates working direct on contracts are charging time correctly7) Process 401k retirement system actions by payroll date8) Monitor contract performance, track deliverables (e.g. spend plans, MSRs), and prepare reports on contract status.9) Maintain accurate contract records and documentation in accordance with company policies and government regulations. Critical Attributes and Mandatory Requirements:1) Integrity, Reliability, Dependability, Trustworthiness, Sense of Duty, Principled Behavior2) Diligent, Meticulous, Attention to Detail, Exact, Precise, Thorough.3) Proficient in Quickbooks and Excel4) Minimum five years of professional bookkeeping/accounting experience.5) Experience with Microsoft Office 365 Suite, especially Teams and SharePoint, but also Outlook, Word and Excel. Desired Attributes and Requirements:1) BA/BS degree in Accounting, Finance, or related field is a plus, or equivalent experience in the workplace is acceptable.2) Knowledge and experience with federal government contracts, the FAR, government accounting and job costing2) Experience with both CPFF and T&M accounting Benefits:Boarhog has over twelve years of defense industrial base steady, controlled growth and profitability, offering our full-time associates a remarkable package, including: • Very competitive salary and near-term opportunities for promotion and additional compensation., • Medical / Dental / Vision Health Benefits., • Environment of Self-Determination, • Company 401K contribution., • Health savings account., • Vacation

Job Description Responsibilities The Service Porter maintains a clean, safe working environment for employees and customers. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Perform test drives on trucks in for service, • Move new trucks to and from body companies, • Support parts deliveries when needed, • Keep parking lot organized, this is for new and used trucks for sale as well as truck in for service, • Ensure trucks for sale will start by rotating through the lot weekly, • Clean trucks when requested, • Deliver customer’s truck when required, • Sweep and mop shop bays when empty, • Perform general janitorial work in the shop and on the surrounding lot Basic Qualifications: • High school education or general education degree (GED), • Must possess a current and valid CDL with a driving record that meets company guidelines, • Ability to use hand tools, • Must be able to work 30 to 40 hours per week Benefits: • We offer exceptional compensation and benefits, 401K and stock purchase, incentives for performance, training, and opportunity for advancement - all in a culture that appreciates and rewards excellence, a positive attitude and integrity. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

We Build Better Communities Be Part of the Hawthorne Difference! Hawthorne Cat is a family-owned company that has led its markets for over 60 years in the sale, rental, and servicing of construction machinery and power generation equipment for industries on which our communities depend like agriculture, construction, marine, and government. Every member of our team plays a significant role in our success. Hawthorne Cat hires individuals who share our vision of Building Better Communities with our Customers and our values of Passion, Respect, Integrity, Dedication and Excellence (PRIDE). If you are looking to build your future with an established, thriving company with countless opportunities for growth and advancement, you've come to the right place! At Hawthorne Cat, we're always looking for exceptionally skilled, hardworking individuals interested in contributing to our success and the success of the communities that we serve. Our people are our most valuable asset. That's why at Hawthorne Cat we are committed to a comprehensive employee benefit program that helps our employees stay healthy, feel secure, and maintain a work/life balance. POSITION SUMMARY: As a technician, with minimal supervision, the Machine Service Technician 2 - Field is responsible for providing high quality repairs on Caterpillar and allied equipment. The Machine Service Technician 2 - Field will diagnose and troubleshoot engines, powertrains, electrical, and hydraulic systems; experience with cat diagnostic equipment, Cat repair tooling, rigging, and blocking equipment is essential. Due to multiple projects the Machine Service Technician 2 - Field will be assigned, this position requires planning and organization skills with a particular emphasis on controlling job costs. The Machine Service Technician 2 - Field will investigate, analyze, and identify issues in order to make recommendations for the appropriate repairs. Our technicians work with a variety of people, communication skills that include strong interpersonal skills, effective writing, basic computer skills, and ability to respond to the lead technicians/management in a positive, caring, and timely manner is required. ESSENTIAL FUNCTIONS: \n • Analyze and diagnose equipment malfunctions.\n, • Remove and install parts, disassemble, and assemble components, and test and adjust assemblies with minimal supervision.\n, • Perform Caterpillar updates as directed by Caterpillar, Inc.\n, • Analyze all Caterpillar and allied product equipment systems and components for proper operation based on theory of design.\n, • Effectively communicate with peers, leads and other staff members.\n, • Organize a job in a logical and economical sequence.\n, • Utilize Cat Interact and Servicelink (computer programs) and other online tools as required.\n, • Order parts through DBS (Dealer Business System).\n, • Enter your labor time daily (DBS).\n, • Perform assigned work within the communicated time quoted/flat rated.\n, • Conduct customer training in proper use of Caterpillar equipment as needed.\n, • Complete assigned jobs to meet flat rate times with minimal to no rework.\n, • Write service reports that accurately document diagnosis and repairs performed on a daily basis.\n, • Attend toolbox meetings as required.\n, • Adhere to all company policies.\n, • Follow contamination control and OSHA/MSHA rules and regulations.\n, • Guide/mentor/train technicians with less expertise in the repairs of Caterpillar machines and systems.\n, • High school diploma or equivalent\n, • Prefer to have one of the following.\n, • Five to eight (5-8) years of experience in the repair of Caterpillar or other heavy equipment products.\n, • Successful completion of Level One Technician program\n\n\n, • General knowledge of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes/rigging equipment.\n, • Ability to provide accurate information to lead/supervisor for quoting.\n, • Ability to adapt to changes in the work environment;\n, • Manages competing demands;\n, • Changes approach or method to best fit the situation;\n, • Deals with frequent change, delays, or unexpected events.\n\n\n, • Must be able to obtain a passing score for the crane qualification test performed by a qualified Hawthorne trainer for this position.\n, • Ability to work unsupervised efficiently and be part of a team environment.\n, • Must be able to pass the Lock Out / Tag Out & Forklift certification class provided by a qualified Hawthorne trainer for this position.\n, • Perform the position with pride in professionalism while following Hawthorne's code of conduct.\n, • Possess basic computer knowledge and ability to use service software required in position.\n, • Must have valid California Driver's License with a clean record.\n, • Shop Requirements: Valid California Class "C" driver's license.\n, • Field Requirements: Valid California Class "B" driver's license, if assigned vehicle is required.\n, • Furnish all hand tools required to repair, test and diagnose hydraulic, air, power train, electrical and electronic systems on Caterpillar equipment., • NOTE: Some high dollar value tooling is supplied by Hawthorne.\n\n, • Walking and moving about on foot often through uneven terrain.\n, • Hands/arms operating equipment, hand and power tools.\n, • Lifting: Up to 50 lbs. daily, frequent exertion. Raises or lowers miscellaneous equipment parts and tools.\n, • Handling: Works with hands.\n, • Reaching: Extends hands and arms in any direction.\n, • Standing: Remains in standing position if required for certain repair or maintenance work.\n, • Climbing: In and out of equipment.\n, • Vision: Reads work tickets, parts and service books and operates heavy equipment.\n, • Talking: Communicates via telecommunications, in writing, and in person.\n, • Sitting: Sits in equipment and in vehicles.\n, • Stooping: Bends body downward and forward by bending at knees or waist.\n, • Hearing: Hears well enough to discern mechanical problems for safety in and around shop and construction sites and to receive communication via telecommunications and in person. \n, • Noise: Works in conditions with constant or intermittent noise.\n, • Temperatures/Weather: Works in the field, outside with variations of temperature and weather.\n, • Competitive Compensation\n, • A great work environment and culture\n, • Career growth and advancement opportunities\n, • Training\n, • Medical, Dental and Vision plans\n, • Medical Video Appointments available\n, • Health Savings Account available\n, • Paid Time Off (PTO) Pay\n, • 401(k) Plan + Company Matching\n, • Health and Dependent Care Flexible Spending Accounts\n, • Life & Accident Insurance\n, • Employee Assistance Programs\n, • Legal Plan\n, • Travel Assistance Plan\n, • Wellness Programs\n, • Referral Bonus Program\n, • Longevity Bonus Program\n, • Recognition Programs and much more\n, • Hawthorne CAT discounts\n, • Boot Reimbursement\n, • Tuition Reimbursement\n, • Company-Supplied Uniforms\n, • Advanced Technical Training\n, • Estimated Compensation $36.80 - $43.80 per hour\n\n Interested in joining the Hawthorne team? Check out our current available positions at: ACCOMMODATIONS: Reasonable accommodations for essential functions of the position will be considered. Hawthorne Cat® is an Equal Employment Opportunity/Affirmative Action Employer. M/F/V/D Hawthorne Cat® Participates in E-Verify.

We Build Better Communities Be Part of the Hawthorne Difference! Hawthorne Cat is a family-owned company that has led its markets for over 60 years in the sale, rental, and servicing of construction machinery and power generation equipment for industries on which our communities depend like agriculture, construction, marine, and government. Every member of our team plays a significant role in our success. Hawthorne Cat hires individuals who share our vision of Building Better Communities with our Customers and our values of Passion, Respect, Integrity, Dedication and Excellence (PRIDE). If you are looking to build your future with an established, thriving company with countless opportunities for growth and advancement, you've come to the right place! At Hawthorne Cat, we're always looking for exceptionally skilled, hardworking individuals interested in contributing to our success and the success of the communities that we serve. Our people are our most valuable asset. That's why at Hawthorne Cat we are committed to a comprehensive employee benefit program that helps our employees stay healthy, feel secure, and maintain a work/life balance. POSITION SUMMARY: With very little or no supervision, will perform duties as assigned by management in the repair, maintenance and/or rebuilding of equipment in the service shop or field, in a safe, efficient and capable manner in the least amount of labor hours necessary, and without re-work. This position requires work to be completed within 110% of any Flat Rate times that are established as targets. ESSENTIAL FUNCTIONS: \n • Analyze and diagnose equipment malfunctions.\n, • Remove and install parts, disassemble, and assemble components, and test and adjust assemblies with minimal supervision.\n, • Perform Caterpillar updates as directed by Caterpillar, Inc.\n, • Analyze all Caterpillar and allied product equipment systems and components for proper operation based on theory of design.\n\n, • Perform new and used equipment start-up for delivery to end-user.\n\n, • Effectively communicate with peers, leads and other staff members.\n, • Organize a job in a logical and economical sequence.\n, • Utilize Cat Interact and ServiceLink (computer programs) and other online tools as required.\n, • Enter labor time daily (ServiceLink).\n, • Perform assigned work within the communicated time quoted/flat rated.\n, • Conduct customer training in proper use of Caterpillar and other equipment as needed.\n, • Complete assigned jobs to meet flat rate times with minimal to no rework.\n, • Write service reports that accurately document diagnosis and repairs performed on a daily basis.\n, • Attend toolbox meetings as required.\n, • Adhere to all company policies.\n, • Follow contamination control and OSHA/MSHA rules and regulations.\n, • Guide/mentor/train technicians with less expertise in the repairs of Caterpillar machines and systems.\n, • Perform other duties as assigned.\n\n EDUCATION, EXPERIENCE, AND SKILLS REQUIRED: \n • High school diploma or equivalent provide verification of all formal classroom study or hands on experience related to heavy equipment repairs. \n, • Prefer to have one of the following.\n, • Minimum (10) years of experience in the repair of Caterpillar or other heavy equipment products.\n, • Successful completion of Level Two Technician program\n, • Knowledge of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes/rigging equipment.\n\n\n, • Expert working knowledge of hydraulics and powertrains.\n, • Proficient in the repairs of electrical and electronic systems.\n, • Ability to provide accurate information to lead/supervisor for quoting.\n, • Adapts to changes in the work environment;\n, • Manages competing demands;\n, • Changes approach or method to best fit the situation;\n, • Deals with frequent change, delays, or unexpected events in a professional manner.\n\n\n, • Must be able to obtain a passing score for the crane qualification test performed by a qualified Hawthorne trainer for this position.\n, • Ability to work unsupervised efficiently and be part of a team environment.\n, • Must be able to pass the Lock Out / Tag Out & Forklift certification class provided by a qualified Hawthorne trainer for this position.\n, • Perform the position with pride in professionalism while following Hawthorne's code of conduct.\n, • Possess basic computer knowledge and ability to use service software required in position.\n Field Requirements: Valid California Class "B" driver's license, if assigned vehicle is required. • Contribute to building a positive team spirit; puts success of team above own interests; able to build morale and group commitments to goals and objectives; supports everyone's efforts to succeed.\n PHYSICAL DEMANDS: \n • Walking and moving about on foot often through uneven terrain.\n, • Hands/arms operating equipment, hand and power tools.\n, • Lifting: Up to 50 lbs. daily, frequent exertion.\n, • Raises or lowers miscellaneous equipment parts and tools.\n, • Handling: Works with hands.\n, • Reaching: Extends hands and arms in any direction.\n, • Standing: Remains in standing position if required for certain repair or maintenance work.\n, • Climbing: In and out of equipment.\n, • Vision: Reads work tickets, parts and service books and operates heavy equipment.\n, • Talking: Communicates via telecommunications and in person.\n, • Sitting: Sits in equipment and in vehicles.\n, • Stooping: Bends body downward and forward by bending at knees or waist.\n, • Hearing: Hears well enough to discern mechanical problems for safety in and around shop and construction sites and to receive communication via telecommunications and in person. \n, • Laying: Lies in prone position under vehicles and equipment. \n\n ENVIRONMENTAL: Noise: Works in conditions with constant or intermittent noise. Temperatures/Weather: Works in a warehouse and outside with variations of temperature and weather. Exposure: Foul odors, fumes and harsh substances. HERE'S WHAT WE OFFER... \n • Competitive Compensation\n, • A great work environment and culture\n, • Career growth and advancement opportunities\n, • Training\n, • Medical, Dental and Vision plans\n, • Medical Video Appointments available\n, • Health Savings Account available\n, • Paid Time Off (PTO) Pay\n, • 401(k) Plan + Company Matching\n, • Health and Dependent Care Flexible Spending Accounts\n, • Life & Accident Insurance\n, • Employee Assistance Programs\n, • Legal Plan\n, • Travel Assistance Plan\n, • Wellness Programs\n, • Referral Bonus Program\n, • Longevity Bonus Program\n, • Recognition Programs and much more\n, • Hawthorne CAT discounts\n, • Boot Reimbursement\n, • Tuition Reimbursement\n, • Company-Supplied Uniforms\n, • Advanced Technical Training\n, • Estimated Compensation $44.00 - $53.00 per hour\n\n Interested in joining the Hawthorne team? Check out our current available positions at: ACCOMMODATIONS: Reasonable accommodations for essential functions of the position will be considered. Hawthorne Cat® is an Equal Employment Opportunity/Affirmative Action Employer. M/F/V/D Hawthorne Cat® Participates in E-Verify.

We Build Better Communities Be Part of the Hawthorne Difference! Hawthorne Cat is a family-owned company that has led its markets for over 60 years in the sale, rental, and servicing of construction machinery and power generation equipment for industries on which our communities depend like agriculture, construction, marine, and government. Every member of our team plays a significant role in our success. Hawthorne Cat hires individuals who share our vision of Building Better Communities with our Customers and our values of Passion, Respect, Integrity, Dedication and Excellence (PRIDE). If you are looking to build your future with an established, thriving company with countless opportunities for growth and advancement, you've come to the right place! At Hawthorne Cat, we're always looking for exceptionally skilled, hardworking individuals interested in contributing to our success and the success of the communities that we serve. Our people are our most valuable asset. That's why at Hawthorne Cat we are committed to a comprehensive employee benefit program that helps our employees stay healthy, feel secure, and maintain a work/life balance. POSITION SUMMARY: As a technician, you are responsible for providing high-quality repairs on Caterpillar and allied equipment. You will diagnose and troubleshoot engines, powertrains, electrical, and hydraulic systems; experience with Cat diagnostic equipment, Cat repair tooling, rigging, and blocking equipment is preferred. Due to the multiple projects, you will be assigned, this position requires planning and organization skills with a particular emphasis on controlling job costs. You will investigate, analyze, and identify the problem to make recommendations that eliminate issues. Our technicians work with a variety of people, communication skills that include strong interpersonal skills, effective writing, basic computer skills, and ability to respond to the lead technicians/management in a positive, caring, and timely manner is required. ESSENTIAL FUNCTIONS: \n • Analyze and diagnose issues on all Caterpillar and allied equipment.\n, • Remove and install parts, disassemble, and assemble components, and test and adjust assemblies with minimal supervision\n, • Perform Caterpillar updates as directed by Caterpillar, Inc.\n, • Analyze all Caterpillar and allied product equipment systems and components for proper operation in arrangement application based on theory of design.\n, • Effectively communicate with peers and supervisors.\n, • Organize jobs in a logical and economical sequence.\n, • Utilize Cat Interact/ ServiceLink and other systems (computer programs) as required.\n, • Order parts through DBS (Dealer Business System).\n, • Enter labor time daily (DBS).\n, • Perform assigned work within the communicated time quoted/flat rated.\n, • Complete assigned jobs to meet flat rate times with minimal to no rework.\n, • Write service reports that accurately document diagnosis and repairs performed on a daily basis.\n, • Attend toolbox meetings as required.\n, • Adhere to all company policies.\n, • Follow contamination control and OSHA/MSHA rules and regulations.\n, • High school diploma or equivalent\n, • Two to five (2-5) years of experience in the repair of Caterpillar products, or other heavy equipment.\n, • Prefer to have one of the following:\n, • Successful completion of apprenticeship program.\n, • Graduation from an accredited technical school with emphasis on diesel technology.\n\n\n, • General knowledge of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes/rigging equipment.\n, • Ability to provide accurate information to lead/supervisor for quoting.\n, • Ability to adapt to changes in the work environment;\n, • Ability to manage competing demands;\n, • Able to change approach or method to best fit the situation;\n, • Able to deal with frequent change, delays, or unexpected events.\n, • Must be able to obtain a passing score for the crane qualification test performed by a qualified Hawthorne trainer for this position.\n, • Ability to work unsupervised efficiently and be part of a team environment.\n, • Must be able to pass the Lock Out / Tag Out & Forklift certification class provided by a qualified Hawthorne trainer for this position.\n, • Performs the position with pride in professionalism while following Hawthorne's code of conduct.\n, • Possesses basic computer knowledge and ability to use service software required in position.\n, • Must have valid California Driver's License with a clean record.\n, • Shop Requirements: Valid California Class "C" driver's license.\n, • Field Requirements: Valid California Class "B" driver's license, if assigned vehicle is required.\n\n\n, • Furnish all hand tools required to repair, test and diagnose hydraulic, air, power train, electrical and electronic systems on Caterpillar equipment., • NOTE: Some high dollar value tooling is supplied by Hawthorne.\n\n, • Contributes to building a positive team spirit; Puts success of team above own interests;\n, • Able to build morale and group commitments to goals and objectives;\n, • Walking and moving about on foot often through uneven terrain.\n, • Hands/arms operating equipment, hand and power tools.\n, • Lifting: Up to 50 lbs. daily, frequent exertion. Raises or lowers miscellaneous equipment parts and tools.\n, • Handling: Works with hands.\n, • Reaching: Extends hands and arms in any direction.\n, • Standing: Remains in standing position if required for certain repair or maintenance work.\n, • Climbing: In and out of equipment.\n, • Vision: Reads work tickets, parts and service books and operates heavy equipment.\n, • Talking: Communicates via telecommunications, in writing, and in person.\n, • Sitting: Sits in equipment and in vehicles.\n, • Stooping: Bends body downward and forward by bending at knees or waist.\n, • Hearing: Hears well enough to discern mechanical problems for safety in and around shop and construction sites and to receive communication via telecommunications and in person. \n, • Noise: Works in conditions with constant or intermittent noise.\n, • Temperatures/Weather: Works in the field, outside with variations of temperature and weather.\n, • Competitive Compensation\n, • A great work environment and culture\n, • Career growth and advancement opportunities\n, • Training\n, • Medical, Dental and Vision plans\n, • Medical Video Appointments available\n, • Health Savings Account available\n, • Paid Time Off (PTO) Pay\n, • 401(k) Plan + Company Matching\n, • Health and Dependent Care Flexible Spending Accounts\n, • Life & Accident Insurance\n, • Employee Assistance Programs\n, • Legal Plan\n, • Travel Assistance Plan\n, • Wellness Programs\n, • Referral Bonus Program\n, • Longevity Bonus Program\n, • Recognition Programs and much more\n, • Hawthorne CAT discounts\n, • Boot Reimbursement\n, • Tuition Reimbursement\n, • Company-Supplied Uniforms\n, • Advanced Technical Training\n, • Estimated Compensation $33 - $35.97 per hour (plus $1.50 field differential for field positions)\n\n Interested in joining the Hawthorne team? Check out our current available positions at: ACCOMMODATIONS: Reasonable accommodations for essential functions of the position will be considered. Hawthorne Cat® is an Equal Employment Opportunity/Affirmative Action Employer. M/F/V/D Hawthorne Cat® Participates in E-Verify.

We Build Better Communities Be Part of the Hawthorne Difference! Hawthorne Cat is a family-owned company that has led its markets for over 60 years in the sale, rental, and servicing of construction machinery and power generation equipment for industries on which our communities depend like agriculture, construction, marine, and government. Every member of our team plays a significant role in our success. Hawthorne Cat hires individuals who share our vision of Building Better Communities with our Customers and our values of Passion, Respect, Integrity, Dedication and Excellence (PRIDE). If you are looking to build your future with an established, thriving company with countless opportunities for growth and advancement, you've come to the right place! At Hawthorne Cat, we're always looking for exceptionally skilled, hardworking individuals interested in contributing to our success and the success of the communities that we serve. Our people are our most valuable asset. That's why at Hawthorne Cat we are committed to a comprehensive employee benefit program that helps our employees stay healthy, feel secure, and maintain a work/life balance. POSITION SUMMARY: With very little or no supervision, the Machine Service Technician 3 - Field will perform duties as assigned by management in the repair, maintenance and/or rebuilding of equipment in the service shop or field, in a safe, efficient and capable manner in the least amount of labor hours necessary, and without re-work. The Machine Service Technician 3 - Field requires work to be completed within 110% of any Flat Rate times that are established as targets. ESSENTIAL FUNCTIONS: \n • Analyze and diagnose equipment malfunctions.\n, • Perform all requirements outlined in Grade Levels III and IV.\n, • Remove and install parts, disassemble, and assemble components, and test and adjust assemblies with minimal supervision.\n, • Perform Caterpillar updates as directed by Caterpillar, Inc.\n, • Analyze all Caterpillar and allied product equipment systems and components for proper operation based on theory of design.\n, • Perform new and used equipment start-up for delivery to end-user.\n, • Effectively communicate with peers, leads and other staff members.\n, • Organize a job in a logical and economical sequence.\n, • Utilize Cat Interact and Servicelink (computer programs) and other online tools as required.\n, • Order parts through DBS (Dealer Business System).\n, • Enter labor time daily (DBS).\n, • Perform assigned work within the communicated time quoted/flat rated.\n, • Conduct customer training in proper use of Caterpillar and other equipment as needed.\n, • Complete assigned jobs to meet flat rate times with minimal to no rework.\n, • Write service reports that accurately document diagnosis and repairs performed on a daily basis.\n, • Attend toolbox meetings as required.\n, • Adhere to all company policies.\n, • Follow contamination control and OSHA/MSHA rules and regulations.\n, • Guide/mentor/train technicians with less expertise in the repairs of Caterpillar machines and systems.\n, • High school diploma or equivalent provide verification of all formal classroom study or hands on experience related to heavy equipment repairs. \n, • Prefer to have one of the following.\n, • Minimum (8) years of experience in the repair of Caterpillar or other heavy equipment products.\n, • Successful completion of Level Two Technician program\n, • Knowledge of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes/rigging equipment.\n\n\n, • Expert working knowledge of hydraulics and powertrains.\n, • Proficient in the repairs of electrical and electronic systems.\n, • Ability to provide accurate information to lead/supervisor for quoting.\n, • Adapts to changes in the work environment;\n, • Manages competing demands; \n, • Changes approach or method to best fit the situation;\n, • Deals with frequent change, delays, or unexpected events in a professional manner.\n\n\n, • Must be able to obtain a passing score for the crane qualification test performed by a qualified Hawthorne trainer for this position.\n, • Ability to work unsupervised efficiently and be part of a team environment.\n, • Must be able to pass the Lock Out / Tag Out & Forklift certification class provided by a qualified Hawthorne trainer for this position.\n, • Perform the position with pride in professionalism while following Hawthorne's code of conduct.\n, • Possess basic computer knowledge and ability to use service software required in position.\n, • Must have valid California Driver's License with a clean record.\n, • Shop Requirements: Valid California Class "C" driver's license.\n, • Field Requirements: Valid California Class "B" driver's license, if assigned vehicle is required.\n\n\n, • Furnish all hand tools required to repair, test and diagnose hydraulic, air, power train, electrical and electronic systems on Caterpillar equipment., • NOTE: Some high dollar value tooling is supplied by Hawthorne.\n\n, • Walking and moving about on foot often through uneven terrain.\n, • Hand/arms operating equipment, hand and power tools.\n, • Lifting: Up to 50 lbs. daily, frequent exertion.\n, • Raises or lowers miscellaneous equipment parts and tools.\n, • Handling: Works with hands.\n, • Reaching: Extends hands and arms in any direction.\n, • Standing: Remains in standing position if required for certain repair or maintenance work. \n, • Climbing: In and out of equipment.\n, • Vision: Reads work tickets, parts and service books and operates heavy equipment.\n, • Talking: Communicates via telecommunications and in person.\n, • Sitting: Sits in equipment and in vehicles.\n, • Stooping: Bends body downward and forward by bending at knees or waist.\n, • Hearing: Hears well enough to discern mechanical problems for safety in and around shop and construction sites and to receive communication via telecommunications and in person. \n, • Noise: Works in conditions with constant or intermittent noise.\n, • Temperatures/Weather: Works in the field, outside with variations of temperature and weather.\n, • Competitive Compensation\n, • A great work environment and culture\n, • Career growth and advancement opportunities\n, • Training\n, • Medical, Dental and Vision plans\n, • Medical Video Appointments available\n, • Health Savings Account available\n, • Paid Time Off (PTO) Pay\n, • 401(k) Plan + Company Matching\n, • Health and Dependent Care Flexible Spending Accounts\n, • Life & Accident Insurance\n, • Employee Assistance Programs\n, • Legal Plan\n, • Travel Assistance Plan\n, • Wellness Programs\n, • Referral Bonus Program\n, • Longevity Bonus Program\n, • Recognition Programs and much more\n, • Hawthorne CAT discounts\n, • Boot Reimbursement\n, • Tuition Reimbursement\n, • Company-Supplied Uniforms\n, • Advanced Technical Training\n, • Estimated Compensation $44.80 to $53.00 per hour\n\n Interested in joining the Hawthorne team? Check out our current available positions at: ACCOMMODATIONS: Reasonable accommodations for essential functions of the position will be considered. Hawthorne Cat® is an Equal Employment Opportunity/Affirmative Action Employer. M/F/V/D Hawthorne Cat® Participates in E-Verify.

Job Description Labor One is hiring Journey-Level Shipfitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, strong mechanical aptitude and ability and be able to follow directions. The individual must possess experience in the trade, knowledge of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions, drawings, and general correspondence., 2. Comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Ability to effectively confer job related information to the structural supervisor and small groups., 6. Ability to read and interpret structural drawings (including weld symbols), sketches, specifications, and NavSea standard items and Navy damage control diagrams., 7. Experience fabricating templates, squaring plates, scribing in structures, and installing perpendiculars on ships in accordance with drawings, specifications, or sketches., 8. Experience using oxy-acetylene torch for cutting and washing., 9. Welding experience: SMAW (S-11A) (fillet) FCAW (S-1) (fillet) GMAW (S-25) (fillet), 10. Experience using hand and power tools safely including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 11. Understand the proper use and operation of structural shop fabrication equipment, including shears, punches, and brakes., 12. Possess a working understanding of the aluminum 5XXX process., 13. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 14. Possess a working knowledge of, and be able to take measurements using the metric system., 15. Four (4) years of related experience. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: a. Prepare the work area for hot work. Coordinate efforts with the fire watch. b. Measure, lay out, and mark structures to be removed using drawings, specifications, shop sketches, or direction from the structural supervisor. c. Cut out existing structures as required by the drawings or specifications, or as directed by the supervisor. d. Construct templates and fabricate foundations or other structures. e. Install prefabricated foundations and structures in accordance with drawings and specifications. f. Install aluminum in accordance with 5XXX standards. g. Direct and monitor the activities of assigned helpers or improvers. h. Remove remnants flush in preparation for new structures or succeeding production tasks. i. Run and remove lines and leads as required to accomplish work and in accordance with OSHA and the shipyards safety standards. j. Implement Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 3rd Shift 40 Hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Sheetmetal Fitters for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, sheet metal repairs and installation on maritime vessels such as Navy Ships, Military Sealift Command ships, and commercial vessels. Repairs and installation include shipboard and shop tasks required to plan, layout, fabrication, and assemble various sheetmetal structures throughout the ship. The position requires a comprehensive understanding of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must possess the ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to effectively confer job related information to the structural supervisor, improvers, and helpers., 6. Must be able to read and interpret structural drawings, sketches, and specifications., 7. Must be able to interpret appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Must have experience repairing and installing shipboard habitability spaces including: berthing equipment; galley equipment; ventilation ducting (heating and cooling); and joiner doors in accordance with drawings, specifications, and sketches., 9. Must understand the principle of balancing air systems including taking proper readings and documenting the results., 10. Must have experience using hand and power tools and understand the operation of fabricating machines such as shears, brakes, presses, forming rolls and routers., 11. Must have experience tack welding using SMAW or GMAW., 12. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 13. Six (6) years of related experience, three (3) of which were in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. 3. Work shifts and overtime as assigned., 3. Keeping the work area clean and safe at all times, especially at the end of the shift., 4. Complete daily work assignments and provide status of unfinished work for shift turnover., 5. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 6. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 7. Carry out written and verbal instructions., 8. Resolve unexpected events related to your assigned task in a professional manner. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 hrs per week/ OT available per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Shipfitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, strong mechanical aptitude and ability and be able to follow directions. The individual must possess experience in the trade, knowledge of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions, drawings, and general correspondence., 2. Comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Ability to effectively confer job related information to the structural supervisor and small groups., 6. Ability to read and interpret structural drawings (including weld symbols), sketches, specifications, and NavSea standard items and Navy damage control diagrams., 7. Experience fabricating templates, squaring plates, scribing in structures, and installing perpendiculars on ships in accordance with drawings, specifications, or sketches., 8. Experience using oxy-acetylene torch for cutting and washing., 9. Welding experience: SMAW (S-11A) (fillet) FCAW (S-1) (fillet) GMAW (S-25) (fillet), 10. Experience using hand and power tools safely including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 11. Understand the proper use and operation of structural shop fabrication equipment, including shears, punches, and brakes., 12. Possess a working understanding of the aluminum 5XXX process., 13. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 14. Possess a working knowledge of, and be able to take measurements using the metric system., 15. Four (4) years of related experience. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift Only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Overview The Retail Supervisor is responsible for assisting the Retail Managers with the day-to-day operations of the Rock Shop, ensuring guest satisfaction, while contributing to the business growth and ensuring all standards and legal obligations are followed. Position reports directly to the Retail Manager and is based in a Cafe. Responsibilities PEOPLE: • Greets employees as they begin their shift to promote an atmosphere., • Continuously provides employees with verbal recognition, direction, and support., • Motivate employees daily by having a positive attitude and having an open line of communication, • Communicates with employees to keep them informed or restaurant, regional, and corporate procedures., • Communicates with managers to evaluate work procedures, review standards, identify methods for increasing efficiency or effectiveness, and respond proactively to any needs that have arisen., • Trains and empowers employees to exercise good judgment to make decisions regarding guest service satisfaction by adhering to company training standards, • Monitors/coaches employees on performance, compliance with procedures and workload., • Uses daily retail R.A.P. Sheet to communicate goals and emerging business trends., • Informs management of employees who fail to meet standards to maintain a high quality workforce., • Ensure employees follow safety, sanitation and security procedures., • Listens to comments, criticisms, and feedback from customers, employees and other managers to gain an understanding of areas of strength and opportunity to improve personal/restaurant performance., • Prepares retail staff for shift via Soundcheck and ensures the Rock Shop is ready to open and run successfully according to standards., • Schedules breaks and zone assignments for Retail employees during the shift., • Opens & closes the retail store., • Completes Opening and/or Closing Checklists., • Balances staffing levels to achieve a cost-effective plan for running the Rock Shop., • Evaluates condition of fixtures and physical characteristics of Rock Shop via BPE. Fixes minor equipment problems (light bulbs) or calls for maintenance assistance when necessary., • Inspects product levels and storage areas to determine if enough product is on-hand; and to maintain proper storage., • Organize visual merchandise displays in order to increase foot traffic and sales., • Observes employees while they stock, assist guests, ring up sales, etc. to ensure adherence to policy and positive guest experience. Evaluate staff via the usage of RSA scorecard., • Assist management with, and help prepare for retail inventory (when applicable)., • Conducts retail product Pull Lists to fill in back stock., • Double checks RSA banks and deposits at checkouts before manager validates and enters into safe., • Ensures that staff is filling out the R.A.P. Sheet upon completion of their shift., • Review retail employee S.O.A.P. reports and other information regarding sales performance., • Monitors employees’ behavior and checks retail count balances to keep honest employees honest., • Supervises deliveries by validating invoices, counting and checking product quality to ensure that the billing and delivery meet amount and standards., • Communicates with other managers to ensure that all assigned duties of retail store are completed, up to standard, and that the store is in showroom quality and ready to open for business at the end of every business day., • Contributes to stores financial growth through driving sales, managing expenses and implementing plans for increased profitability., • Assists in the training and retentionof store staff in sales to deliver exemplary customer service and meet sales goals., • Builds the business by thinking of new ways to help promote new programs that will help increase sales and profits LEADERSHIP: • Self-Accountability, • Innovation, • Practices honesty, integrity, and professionalism at all times, • Problem Solving, • Modeling, • Strategic Thinking, • Communication, • Coaching and Development, • Impacting and Influencing, • Encourage EVERYONE to maximize their potential This job description reflects the position’s essential functions; it does not encompass all of the tasks that may be assigned. Qualifications EXPERIENCE, EDUCATION, AND CERTIFICATIONS Job Requirements include: • 3-5 years of supervisor experience, • Knowledge of inventory, P&L and key holder experience, • Two (2) years of high volume supervisor experience, • GED or High School degree preferred, • Proficiency communicating (speaking, reading, and writing) in English, bilingual preferred., • Ability to work a flexible schedule to meet the needs of the business SKILLS • Strong leadership and interpersonal skills, • Can illustrate consultative skills and ability to work cross-functionally., • Exhibits excellent verbal and written communication, • Demonstrates strong problem solving and analytical skills through ability to diagnose and develop recommended PHYSICAL DEMANDS • Ability to move throughout the corporate office and cafes during visits (standing, walking, kneeling, bending) for extended periods of, • Ability to sit for extended periods of, • Ability to make repeating movements of the arms, hands, and, • Ability to express or exchange ideas verbally and perceive sound by, • Manual dexterity, hand-eye coordination, and ability to work with hand above shoulders., • Ability to occasionally, regularly, frequently move objects (lift, push, pull, balance, carry) up to 10, • Ability to turn or twist body parts in a circular, • Ability to tolerate exposure to heat, cold, chemicals, and loud/noisy, • Ability to travel via auto or airplane for long periods of time

Job Description Labor One is hiring Sheetmetal Fitter Improvers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:Under supervision of a supervisor or Journeyman, this position is responsible for the removal, assembly, installation and repair of sheetmetal products and equipment such as HVAC ducting, furniture, nonstructural bulkhead systems and ceiling systems in berthing, heads, living spaces, and food service areas on maritime vessels such as Navy Ships, Military Sealift Command ships, and commercial vessels. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item., 5. Must be willing and able to carry out written and verbal instructions provided by the supervisor and journeyman., 6. Must be able to interpret appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 7. Must have experience repairing and installing berthing equipment; galley equipment; ventilation ducting (heating and cooling); and joiner doors., 8. Must have experience using hand and power tools and understand the operation of fabricating machines such as shears, brakes, presses, forming rolls and routers., 9. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 10. Four (4) years of related experience, one (2) of the years in a maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, being aware of the added responsibility for fire prevention., 5. Complete daily work assignments and provide status of unfinished work to the supervisor and journeyman., 6. Assist with documenting Objective Quality Evidence (OQE) as required by the work specifications., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 8. Resolve unexpected events related to your assigned task in a professional manner. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 hrs per week/ OT available per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionLabor One is hiring Journey-Level Marine Electricians for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for the installation, repair, and hook-up of equipment for electrical services on a ship. The individual must have working knowledge of electrical theory and procedures and the ability to troubleshoot and repair shipboard electrical systems and equipment (600 V and less) in accordance with specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE Must possess the skill sets of subordinate grades of the labor class. DUTIES AND RESPONSIBILITIES -Must comply with OSHA standards and the shipyards best safety practices. --Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) -Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. Personnel are accountable for completion of daily work assignments. -Keep your work area clean and safe at all times, especially at the end of the shift. -Understand relevant work processes, operation of equipment, and complete tasks proficiently. -Use appropriate sections of IEE, ABS, Coast Guard and manufacturer's tech manuals and ship's information book in repairing electrical equipment and installing electrical equipment. -Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. -Work shifts and overtime as assigned. -Comply with the Company's “Non-Discrimination and Anti-Harassment ---Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. -Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: 1. Running cables, lines and leads, terminations/connector fabrication, packing of cable transits and harnessing cables aboard vessels., 2. Prepares work area, drills holes, grinds metal surfaces, inspect and reports on cableway and electrical equipment conditions, tests and reports results on electrical equipment., 3. Test internal circuits of major units of electrical equipment for continuity, short circuits, and grounds and measure electrical quantities and compare with established values., 4. Inspect trip shafts, toggle linkages and all other mechanical parts to see that they operate freely without binding., 5. Inspect mechanical and electrical connections including mounting bolts and screws; draw out disconnect devices and control wiring., 6. Detect and locate grounds, open circuits and short circuits in distribution generators and systems. Maintain and repair telephones, circuits, and associated equipment., 7. Install new power and lighting circuits., 8. Must be familiar with all safety procedures pertaining to or where to obtain electrical procedures. Must be very knowledgeable of work/safety procedures and manual., 9. Implement Lock-out Tag-out for work being performed. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. ---The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. -Appropriate --PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 2nd Shift 40 hours per week / OT per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Electrician Improvers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for assisting Journeyman/1st Class electricians with the installation, repair, and hook-up of equipment for electrical services on a ship. The individual must have work knowledge of electrical theory and procedures and the ability to troubleshoot and repair shipboard electrical systems and equipment (600 V and less) in accordance with specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE Must possess the skill sets of subordinate grades of the labor class. Must be able to comprehend instructions, drawings, and general correspondence. Must be able to effectively confer job related information such as conditions found to the journeyman. Must understand Ohms law and its application. Must be able to read and interpret blueprints, electrical diagrams, computer printouts, specifications, and Navy standards manual. Understand appropriate sections of IEE, ABS, Coast Guard and manufacturer's tech manuals and ship's information book regarding electrical equipment. Must possess a thorough understanding of equipment and work processes used in marine electrical repair and system installation. Must be able to operate and care for Electric Shop equipment, portable power tools, and hand tools. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand US standard and metric system measurements. Must have three (3) years of related electrical installation and repair experience. DUTIES AND RESPONSIBILITIES Assist a journeyman/1st Class electrician wit completing assigned tasks successfully. Provide direction to a Helper/3rd Class electrician to help complete assigned tasks. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor or journeyman/1st Class electrician. Accountable for completion of daily work assignments. Must comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) Keep your work area clean and safe at all times, especially at the end of the shift. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. Work shifts and overtime as assigned. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. Carry out instructions furnished in written, oral, or diagram form. Confer with the Journeyman/1st Class electrician to resolve unexpected events related to your assigned task. Work Tasks Include: 1. Running cables, lines and leads, terminations/connector fabrication, packing of cable transits and harnessing cables aboard vessels., 2. Prepares work area, drills holes, grinds metal surfaces, inspect and reports on cableway and electrical equipment conditions., 3. Under direct supervision test internal circuits of major units of electrical equipment for continuity, short circuits, and grounds and measure electrical quantities and compare with established values., 4. Inspect mechanical and electrical connections including mounting bolts and screws; draw out disconnect devices and control wiring., 5. Detect and locate grounds, open circuits and short circuits in distribution generators and stems. Assist with the repair and maintenance of telephones, circuits, and associated equipment., 6. Assist with the installation of new power and lighting circuits., 7. Must be familiar with all safety procedures pertaining to electrical procedures or ask for safety information before working on electrical equipment., 8. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office condition to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. (x1) 1st Shift Needed (x2) 2nd Shift Needed Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Home Depot - 1694 CONTINENTAL STREET [Material Handler / Freight Handler] As a Warehouse Associate at Home Depot, you'll: Load and unload merchandise from trucks and move material within the warehouse; Carry or lift, as well as operate forklifts or other material handling equipment, in an organized

Aramark - JobID: 608735 [Material Handler / Freight Handler] As a Warehouse Worker at Aramark, you'll: Receive and process incoming stock, prepare and complete orders for delivery or pickup and perform inventory and quality control; Check for quality and damages to items and store the delivered prod

PeopleReady - PR-1477080 [Material Handler / Freight Handler] As a Warehouse Worker at PeopleReady, you'll: Assist with loading and unloading trucks; Operate forklifts and other warehouse equipment; Maintain a clean and organized work environment; Pick and pack orders accurately and efficiently; Per

Staffmark - JobID: 1947184 [Material Handler / Freight Handler] As a Warehouse Worker at Staffmark, you'll: Lift up to 50 lbs unassisted; Operate a manual pallet jack; Stand on feet for up to 8 hours; Operate an RF scanner.

Floor & Decor - Job Posting Site [Material Handler / Freight Handler] As a Warehouse Associate at Floor & Decor, you'll: Receive the product off delivery trucks and stock the warehouse in an organized fashion; Ensure the sales floor is stocked and ready for customers the next day; Be knowledgeable o

Otay Mesa Road [Material Handler / Freight Handler] As a Warehouse Associate at Salvation Army U.Sort product efficiently and properly according to the standard of TSA policy; Inspect products for defects and damages; Identify product correctly and direct to proper department for processing; Collect

Partners Personnel - JobID: san-diego-warehouse-associate-4 [Material Handler / Freight Handler] As a Warehouse Associate at Partners Personnel, you'll: Perform tasks such as receiving, processing, and storing inventory; Operate equipment like forklifts and pallet jacks; Maintain a clean and organiz

Floor & Decor - Job Posting Site [Material Handler / Freight Handler] As a Warehouse Associate at Floor & Decor, you'll: Receive the product off delivery trucks and stock the warehouse in an organized fashion; Ensure the sales floor is stocked and ready for customers the next day; Be knowledgeable o

Delivery Driver / $18-$25 an hour] - Full-time or Part-time / Earn Extra Cash (Delivery, Tips, & Bonus Incentives) / Flexible Scheduling - Delivery.As a delivery driver with Delivery.Play a crucial role in ensuring prompt and efficient delivery of orders to our customers; Safely and responsibly oper

Personal Shopper] As a Grocery Delivery Driver at Shipt you will: Get paid to shop by filling customer orders and delivering to their door; Earn up to $22/hour* shopping for and delivering things people love from stores they trust; Set your own hours - part-time - full time - or any time; Be at leas

Cardinal Health - JobID: 31446fee-e79b-4d38-b9aa-4ca839316deb [Package Delivery Driver / Flex Driver] As a Delivery Driver at Cardinal Health, you'll: Prepare and make deliveries to customer accounts on assigned route using a company vehicle (non-cdl); Package radiopharmaceutical medication for ship