Civil construction jobs in San Diego, California - Page 2Create job alerts

Job DescriptionSalary: $25/Hourly Directly from the classroom to the construction site, you will see firsthand a culture founded on trust and quality to our clients, employee owners and our communities. Your efforts will go directly to building a better tomorrow for your communities! Throughout your internship you will experience firsthand our family culture! You will begin building a foundation for your future career by developing skills and expanding your knowledge to take with you into your next chapter of life Our Interns report to the Project Manager or Assistant PM, Pre-construction, or Estimating Managers and perform duties to assist in learning the process of managing the construction of the project. Interns work in conjunction with other Field Staff to ensure mutual project and personal development goals are being met. Duties may include the following, depending on education and skill level, as well as the status/timing of the project. Please note that this position takes place in multiple regions, San Diego, Riverside, Orange County and Imperial. Key Responsibilities • Assist team with General Contract and Subcontract administration, • Learn about Quality Control programs and how to coordinate actions to address problems, • Control of documents including but not limited to RFI postings and contract documents, • Distribute information required for construction to appropriate parties, • Work with the projects PE(s), SPE(s), and APM(s) to compile contract close-out documents (O&M manuals, As-Builts, etc.), • Assist in preparation of a contract items list, • Research and suggest options on construction means, methods, and equipment, • Perform other duties as required or assigned Qualifications • Current student (preferably sophomore or higher) working towards a Bachelor's degree, in Construction Management, Mechanical Engineering, Civil Engineering, Structural Engineering or a related field., • A strong desire to learn and develop new skills, • Strong sense of Teamwork Success managing multiple, competing priorities in a deadline driven environment * Excellent oral and written communication and interpersonal skills * Resourceful with strong problem solving and troubleshooting skills * Ability to work independently as well as collaborate on a team * Highly organized and detail oriented; able to prioritize and multi-task * While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand, and finger skills in the use of a keyboard, telephone, or writing * The employee is frequently required to stand; walk; and reach with arms and/or hands Acknowledgments Erickson-Hall Construction Co. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any of the following, whether actual or perceived or based upon identification or association: race, color, religious creed, national origin, ancestry, age, medical condition, pregnancy or childbirth (and related medical conditions), physical or mental disability, genetic information, sex, gender (including gender identity and gender expression), sexual orientation, marital status, registered domestic partner status, military status, veteran status, political activity or affiliation or any other basis protected by law.

Job DescriptionDescriptionWe are Leighton, a Verdantas company! Leighton boasts a 62 year legacy providing innovative geotechnical, geologic, environmental, materials testing, and special inspection solutions to local municipalities, public agencies, and private clients across southern California. The Leighton difference lies in our expertise, our passion, and, most importantly, our people. Together with Verdantas, we are committed to supporting our clients with sustainable, high-quality, value-added services. Be a part of building the next great comprehensive environmental, energy, water, and civil infrastructure consulting firm. Partner with your peers and leaders to make a lasting, positive impact on society through some unique projects affecting our clients and our communities. We are seeking an experienced and talented Laboratory Soils/Materials Technician to join our Southern California team for our San Diego office. This is a non-exempt position. Responsibilities: • Perform laboratory tests on construction materials (moisture content, compaction, sieves, hydrometers, atterberg limits, corrosion suites, and expansion index, concrete flexural strength, etc.), • Apply basic computer data templates, interpret test data, and prepare reports of test data, • High School diploma or GED, • 2 plus years in Civil Engineering or lab testing, preferred, • Caltrans Certification, • Strong math skills, • Willingness to work in a soils environment which may require getting dirty, • Ability to lift 50 pounds on a regular basis and operate hand-controlled testing equipment, • Flexible Work Environment, • Paid Parental Leave, • Medical, • Dental, • Vision, • Life and AD&D Insurance, • Short-Term and Long-Term Disability, • 401(k) with Company Match, • Paid Time Off + Holidays

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn, and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is currently seeking a Senior Project Engineer to join our Fuel Facility team. Location at a C&S office is preferred; however, a remote location is negotiable. Full-Time is Preferred; however, Part-Time is negotiable. The Senior Project Engineer is expected to have good relationships with clients and professionals in the fueling systems industry and will be responsible for generating project opportunities and managing fueling systems projects. In this role, the Senior Project Engineer will work with our multi-disciplinary design team to deliver projects in the aviation, automotive, and related fueling systems markets. Position Responsibilities • Develop effort budgets and schedules for prospective project pursuits., • Develop working relationships with existing and prospective clients and professionals., • Generate project opportunities., • Develop and optimize processes for improved efficiency, sustainability, and cost-effectiveness. Apply advanced problem-solving techniques and tools to enhance process design and operations., • Ensure all engineering projects comply with applicable codes, standards, and regulations. Maintain an up-to-date knowledge base of industry standards and government regulations., • Implement and oversee quality assurance protocols to maintain the quality of engineering outputs. Conduct reviews and audits of project deliverables to ensure technical accuracy and integrity., • Champion safety protocols and risk management practices throughout project lifecycles. Analyze potential risks and develop mitigation strategies to prevent accidents and operational failures., • Develop P&IDs for, but not limited to: Aviation Fueling Systems, Automotive Fueling Systems, Heating Oil Systems, and Emergency Generator Systems., • Communicate effectively with all stakeholders, including management, clients, regulatory bodies, and project teams, ensuring clear and consistent communication regarding project progress and issues., • Mentor less experienced engineers and support their professional development., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Minimum bachelor’s degree in mechanical, environmental, or industrial engineering or other similar degree., • Minimum 10 years’ experience working on flammable and combustible liquids fueling systems projects., • Professional Engineer (PE) license preferred or willing to pursue PE license., • Understanding of flammable and combustible liquids engineering principles, methodologies, and tools., • Ability to analyze complex engineering problems and develop effective solutions., • Comprehensive knowledge of relevant industry standards, safety regulations, and environmental laws., • Ability to write sequence of operation processes with P&IDs., • Excellent verbal and written communication skills, capable of effectively articulating technical information to non-technical stakeholders and writing detailed reports., • Efficient in; Bluebeam (or other PDF reader), Microsoft Word, Microsoft Excel, and Microsoft Outlook. $120,000 - $140,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description At Griffith Company, we recognize that people are our most valuable resource. We nurture that resource by fostering a work environment that encourages communication, respect and recognition. In this environment, Griffith Company employees flourish, taking their careers to new levels. In addition to offering a 120+ year history of quality, safety and excellence, Griffith Company has a dynamic, exciting and supportive culture where opportunity for growth abounds. We are currently looking for an experienced heavy civil project superintendent to join our San Diego Area. The person in this position will manage, schedule, and coordinate all company on-site activities, subcontractors and suppliers. Essential Functions • Construct the project on time within budget., • Review and approve construction methods and sequence of operations., • Coordinate manpower and equipment utilization., • Assist project manager in conducting effective pre-construction/pre-planning meetings., • Understand the contractual scope of the work. Familiarity with plans and specifications., • Direct and supervise foreman., • Coordinate with Project Manager/Project Engineer/Estimator., • Supervise and update the project schedule., • Interact with the Owner's representatives, including attending weekly owner meetings., • Coordinate subcontractor and district/division work. Understand inclusions and exclusions., • Monitor job site safety compliance., • Maintain union relations., • Ensure timely project close out and punch list finalization., • Review job costs and budget controls with project manager/foreman. The individual must possess the following knowledge, skills and abilities and be able to explain and demonstrate that he or she can perform the essential functions of the job. • Must utilize effective management techniques to maximize project performance., • Thorough understanding of corporate and industry practices, processes and standards, and their impact on project activities is vital., • Effective communication, • Leadership, coaching, and employee development, • Adaptability/change management, • Conflict resolution/problem solving, • Decisiveness, • Time management/multitasking, • Detail oriented, • Stress management, • Performance management Bachelor’s degree in Engineering or equivalent combinations of technical training and/or experience. Experience • 8+ years’ experience with extensive knowledge of construction techniques., • Regularly exposed to outdoor weather conditions, • Noise level may be moderate to loud on project sites, • Use hands to finger, handle or feel; reach with hands and arms, • Frequently required to stand and walk, • Regularly lifts and moves up to 25lbs, • Typing and visual use of computer or other devices, • Ability to talk and hear In addition to offering a comprehensive benefits package for all employees — including a superior health benefits package — Griffith Company also offers generous performance-based compensation. As part of an Employee Stock Ownership Plan (ESOP) Corporation, Griffith Company employees have the opportunity to directly and financially benefit from the Company's success. Other benefits include vacation time, sick days, paid holidays, and a 401K program. (Benefits are subject to eligibility requirements) Annual Salary Range: $130,000 - $190,000 (depending on level of experience and qualifications). Relocation assistance will be provided to candidates outside of the local area on a case-by-case basis. Visit us at: . Griffith Company is an equal opportunity employer and an employee-owned company. Important Notice to Staffing Agencies/Recruiting Firms (please read completely) Griffith Company will not accept unsolicited resumes from any sources other than directly from a candidate, Griffith Company employee or any of our industry and academic partners. Any unsolicited resumes sent to any of the following will be considered Griffith Company property: Griffith Company mailing address, fax machine or email address; Griffith Company employees; or to Griffith Company's applicant/candidate database. Griffith Company will NOT pay a recruiting/placement fee for any candidate hire resulting from the receipt of an unsolicited resume. We will only accept resumes from staffing agencies/recruiting firms who meet the following criteria: 1. Have a valid fully-executed written contract with Griffith Company for service (signed only by our CEO, President, Executive Vice President or Human Resources Director). No other Griffith Company employee is authorized to bind Griffith Company to any agreement regarding the placement of candidates by Agencies., 2. Responding to a written request from a member of our Human Resources team to work on filling a specific job opening - we will not accept any unrelated resumes. In the cases of staffing agencies/recruiting firms that meet the above criteria: we will not consider a presentation of a candidate to us as accepted unless a member of our Human Resources team expresses in writing to your firm/agency an interest in engaging with a candidate that is being presented. The act of a firm/agency simply sharing a candidate resume or profile with a hiring manager or any other Griffith Company employee by email, text or any other communication method will not suffice as Griffith Company's acceptance of a candidate. Powered by JazzHR ccuAa5YxJv

Job Description100% Remote Construction Defect Attorney! This Jobot Job is hosted by: Sharon Brown Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $160,000 - $200,000 per year A bit about us: Would you like a remote role? Please read on! This law firm is a boutique litigation practice based in Southern California, known for its focused expertise in insurance defense and civil litigation. The attorneys provide strategic representation for clients across a range of matters including personal injury, construction defect, product liability, and general liability claims. With a client-centered approach, the firm emphasizes responsiveness, efficiency, and strong courtroom advocacy. Its team combines deep legal knowledge with practical experience, allowing them to navigate complex cases and deliver favorable outcomes. Collaboration and communication are key strengths, enabling the firm to build lasting relationships with insurers, businesses, and individuals. The practice is respected for its professionalism, integrity, and consistent results in both trial and appellate courts. Why join us? Benefits: • 100% remote!, • 401(k), • 401(k) matching, • Dental insurance, • Flexible schedule, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Professional development assistance, • Referral program, • Retirement plan, • Vision insurance Job Details We are seeking a skilled and detail-oriented Attorney specializing in Construction Defect Insurance Defense to join our legal team. The ideal candidate will have extensive experience defending insurance carriers and insured clients in construction defect claims, providing strategic counsel, and managing complex litigation matters from inception through resolution. This role requires strong legal analysis, negotiation skills, and the ability to work collaboratively with clients, experts, and insurance professionals. Key Responsibilities: • Represent insurance companies and insured clients in construction defect litigation, including trial and pre-trial proceedings., • Review and analyze insurance policies, contracts, and construction documents to assess coverage and liability issues., • Develop and implement defense strategies tailored to the unique facts and legal issues of each case., • Conduct depositions, prepare pleadings, motions, discovery requests, and other legal documents., • Collaborate with claims adjusters, engineers, and expert witnesses to build a strong defense., • Negotiate settlements and alternative dispute resolutions to minimize client exposure., • Advise clients on risk management, policy interpretation, and coverage disputes related to construction defects., • Stay current with relevant laws, regulations, and industry trends affecting construction defect litigation and insurance defense., • Juris Doctor (JD) degree from an accredited law school., • Admission to the state bar and in good standing., • Minimum of 3-5 years of experience in construction defect litigation and insurance defense preferred., • Strong knowledge of construction law, insurance coverage principles, and defect claims., • Excellent written and oral communication skills., • Proven ability to manage multiple cases and deadlines effectively., • Strong negotiation and trial advocacy skills., • Detail-oriented with strong analytical and problem-solving abilities., • Experience working with insurance carriers and familiarity with insurance policies and coverage disputes., • Background in alternative dispute resolution and mediation. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job DescriptionHybrid Remote Civil litigation Associate This Jobot Job is hosted by: Sharon Brown Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $125,000 - $200,000 per year A bit about us: We focus on litigation defending public entity, insurance and corporate clients. We have a statewide practice handling a wide variety of cases in state and federal courts involving, among other areas, civil rights, employment, personal injury, wrongful death, premises liability, development and construction, inverse condemnation and writs and appeals. Our attorneys handle cases in all areas of our practice. Why join us? We have impeccable team of attorneys and support staff. We value open communication and strive to provide a rewarding work environment. We value work-life balance and fosters professional growth and opportunities. We offer hybrid work options in a relaxed and congenial work environment, platinum top-tier full health care, lucrative annual bonus system, generous profit-sharing plan, and 401k. Benefits: • 401(k), • Dental insurance, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Job Details We are a extremely busy firm and we expect attorneys to be self-motivated, forward thinking and deadline cognizant. The candidate must be comfortable and proficient in independently managing a full case load, and must have successfully handled all aspects of civil litigation from start to finish. The candidate must have written and argued motions, including summary judgment motions, and must have taken and defended depositions. Federal court experience is preferred but not required. Experience in our particular practice areas is desired, but we will train the right candidate. Experience: If you're looking for an amazing firm with lots of room for professional growth please send your resume today! Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description Looking for a place to grow your career and make a difference? RICK is the place for you! As a Principal Project Engineer/Manager in San Diego, CA you will have an opportunity to work with a multi-disciplinary team on meaningful, landmark projects in the San Diego, CA area. As a RICK team member, you will help clients and communities turn their dreams into reality. You will learn from and work alongside industry-leading experts and together shape the future of tomorrow. Qualifications Qualified candidate will have a BSCE degree, CA Registration as a Professional Civil Engineer, (or ability to obtain in next 6 months), plus a minimum of eight (8-12) years relevant experience; or the equivalent work experience of twelve (12-15) years in this industry. Candidates for this position must demonstrate: • Independent thought and decision-making abilities, • Must demonstrate strong independent thought and decision-making abilities, • A minimum of three years management experience supervising the work of technical staff required, • Possess demonstrated leadership and supervisory skills, • Demonstrate Project management ability, • Management of construction documents and contracts, • Management of construction support and field coordination, • Management of project schedules and budgets, • Preparation of contracts, fee proposals, and scopes of work, • Significant experience in client and public-agency interactions, • Ability to perform conceptual and preliminary engineering design studies (incorporating land use and zoning considerations, assessment and consideration of site constraints, infrastructure requirements, and potential regulatory issues), • Preparation/processing of regulatory plans, • Preparation/processing of public improvement plans (private and public), • Ability to perform constructability reviews AutoCAD/Civil 3D. CAD experience is required. Additional Skills: • Applies engineering principles, techniques, and procedures for Civil Engineering design, • Possesses working knowledge of business and management principles associated with strategic planning, resource allocation, leadership techniques, production procedures, interview and hiring methods and the coordination of people, • Accepts and carries out responsibility for the design team's direction, control and planning; sets realistic goals and makes decisions independently, • Exhibits a thorough understanding of jurisdictional processing, • Negotiates effectively, • Demonstrates a high level of leadership & management ability; accepts and responds appropriately to constructive feedback with others and applies seasoned time management, • Relates well and maintains a high level of respect and confidence from co-workers, public agencies, • Demonstrates a high level of competence in written and oral communication, • Generous Benefits Package, • Medical, Dental, Vision, Profit Sharing, 401K, and Life and Disability Insurance and Personal Leave RICK Engineering Company is an Equal Opportunity Employer RICK employees are protected by laws designed to protect employees from discrimination based on race, religion, color, sex, pregnancy, gender identity, sexual orientation, parental status, national origin, age, disability, family medical history or genetic information, political affiliation, military service, or any other non-merit-based factor. These protections extend to all management practices and decisions, including recruitment and hiring practices, appraisal systems, promotions, and training and career development programs. RICK employees are also protected against retaliation if they engage in a protected activity, whistleblowing, or the exercise of any appeal or grievance right provided by law.

Job DescriptionPosition: Jobsite Safety Manager Department: Safety Reports To: Corporate Safety Director Works Closely With: Superintendent, Project Manager, and Field Operations Team Location: Project-Based (San Diego/ San Clemente Area) FLSA Status: Exempt ABOUT CONDON-JOHNSON & ASSOCIATES Condon-Johnson & Associates is a leading geotechnical construction contractor known for its innovation and expertise in designing and building complex foundation systems. Serving the Western United States, we specialize in delivering customized solutions for commercial, heavy civil and industrial projects. Our team is committed to engineering excellence, safety, and performance across a wide range of challenging environments. Regional Safety Manager: The Jobsite Safety Manager is responsible for managing and implementing the company’s Health, Safety, and Environmental (HSE) programs at assigned heavy construction project sites. This role ensures compliance with federal, state, and local regulations, as well as client and company safety standards. The Jobsite Safety Manager serves as the primary on-site representative for all safety matters, fostering a culture of safety, accountability, and continuous improvement. Key Responsibilities: • Administer, implement, and enforce the project-specific Health, Safety, and Environmental (HSE) Plan., • Conduct site safety inspections, audits, and incident investigations; document findings and ensure timely corrective actions., • Lead daily and weekly safety meetings, toolbox talks, and Job Hazard Analyses (JHAs)., • Provide safety orientations and training to employees, subcontractors, and visitors., • Collaborate with the Superintendent, Project Manager, and Corporate Safety Director to ensure safety is integrated into all operations., • Liaise with clients, the Authority, and regulatory agencies regarding safety compliance, documentation, and reporting., • Maintain all required safety documentation, including logs, permits, inspection reports, and training records., • Minimum 7 years of heavy construction experience administering HSE programs on large construction projects., • Certification: Must hold one of the following active credentials in current standing:, • Certified Safety Professional (CSP) — Board of Certified Safety Professionals (BCSP), • Construction Health and Safety Technician (CHST) — BCSP, • Certified Industrial Hygienist (CIH) — American Board of Industrial Hygiene (ABIH), • Demonstrated knowledge of OSHA standards, Cal/OSHA Title 8, and industry best practices., • Strong leadership, communication, and interpersonal skills., • Proficiency in safety management systems, digital reporting tools, and Microsoft Office., • Bachelor’s degree in Occupational Safety, Environmental Science, Construction Management, or a related field., • Experience in geotechnical, foundation, or heavy civil construction environments., • Ability to stand, walk, climb, and work outdoors in various weather conditions., • Health / Vision / Dental Insurance, • Life & Disability Insurance, • Flexible Spending Account (FSA), • Health Spending Account (HSA), • 401(k) Plan with generous company match, • Profit Sharing Plan 6ZvQ1J4XTn

Job Description Essel is looking for a Mid to Senior Level Solid Waste Engineer to manage and work on diverse solid waste projects. In this role you will help manage projects, developing proposals and will also be directly involved with public and private clients in marketing, client management, and project production. Responsibilities include project management, business development, and staff development. Project responsibility will have a primary focus on solid waste management, including landfill gas, landfills and landfill infrastructure, composting, and other projects, which may require design, engineering, permitting, construction and/or operations support. You can be hybrid out of our San Diego, Long Beach, Pleasanton, or Sacramento office. Remote work might also be considered if you live in California. • Apply intensive and diversified knowledge of engineering and scientific principles and practices in solid waste assignment areas and related fields., • Prepare engineering calculations, drawings, reports, and permit applications., • Make decisions independently on engineering or scientific problems and methods, plans and coordinate work, and represent us at meetings and conferences., • Field work performed by high/driving in varied terrain and weather will be required, including but not limited to, surveys/data gathering, CQA liner installations, inspections, etc., • Office-based tasks including: CAD drafting, mathematical calculations, report writing, creating site plans and facility diagrams, and permit applications., • Business development including: proposal preparation, meeting with clients, and attending industry-related conferences/trade shows., • Bachelor’s degree in relevant engineering field required., • Minimum of 6 years of relevant working knowledge/demonstrated consulting experience with projects specific to the solid waste industry, including:, • Landfill gas management, air compliance, and landfill design and permitting is required., • E.I.T. required and California P.E (civil) registration or ability to obtain within 6 months preferred., • Medical, dental, vision, 401K, and employer-funded Employee Stock Ownership Plan (ESOP), • Student Debt Employer Contribution Program, • Paid holidays and PTO

Job Description Join a multi-disciplinary team in San Diego, CA and play a key role in shaping meaningful, landmark projects across Los Angeles and Ventura County. As a Principal Civil Design Engineer, you'll help communities bring their visions to life working alongside industry-leading experts to design infrastructure that stands the test of time. Why You'll Love Working Here • Impactful Work: Contribute to projects that transform communities and redefine possibilities in land development and public works., • Career Growth: Opportunities to lead, mentor, and advance within a collaborative, forward-thinking environment., • Team Spirit: Work with respected peers and public agencies while building lasting professional relationships., • Culture & Perks: Alternative work schedules, holiday parties, team-building activities, and a supportive workplace culture., • Lead preparation of grading and public improvement plans from concept through final documentation, • Develop and process technical studies, site plans, and entitlement packages for land development projects, • Prepare Plans, Specifications, and Estimates (PS&E) for public infrastructure (streets, sewers, storm drains), • Conduct site assessments and engineering design studies, incorporating infrastructure requirements and regulatory considerations, • Manage regulatory plan preparation and processing through Los Angeles and Ventura County Public Works, • Perform constructability reviews and provide construction support services, • BSCE degree required, • California Professional Civil Engineer registration preferred (not required), • Minimum 4 years of relevant experience in land development/public works, or 8 years equivalent industry experience, • At least 2 years of supervisory experience leading engineers/designers/project staff, • Strong knowledge of jurisdictional codes, standards, and procedures (Los Angeles area preferred), • Proficiency in AutoCAD and Bluebeam, • Excellent communication skills, with the ability to prepare exhibits, studies, and final plans

Job Description Fisher Industries is a vertically integrated family of businesses that provides heavy civil construction and aggregate products across the United States. With over 70 years of experience, the company specializes in highways, bridges, aggregates, and large-scale infrastructure projects, supported by in-house capabilities in drilling, blasting, crushing, asphalt, and concrete production. Fisher is committed to delivering innovative, cost-effective solutions with an emphasis on safety and quality. As a proven industry leader, Fisher Industries continues to grow while maintaining the integrity and values of a family-owned company. For additional information about our company, visit our website at POSITION SCOPE The Heavy Equipment Operator position is designated as safety sensitive, emphasizing the importance of adhering to safety protocols at all times. The operator must be proficient in operating machinery such as D8-D9 dozers and 345-352 excavators in accordance with project specifications to ensure efficient and compliant operations. Additionally, the individual will be responsible for the daily servicing and maintenance of equipment to ensure optimal performance and safety standards are maintained throughout the project duration. The equipment operator will need to be highly skilled in navigating and operating machinery in mountainous terrain, which presents unique challenges such as pioneering access to build up extremely steep slopes, uneven surfaces, rocky mountain terrain, and potential for landslides or loose soil. Proper training in mountain-specific safety protocols, equipment handling, and environmental considerations is essential to ensure safe and efficient operations in this rugged environment. 30-85% GRADE IN SHEER ROCK CONDITIONS. PRIMARY DUTIES • Operate equipment efficiently to maintain production goals, • Assist with setup and tear down of plants, • Perform general maintenance, repair, and service equipment as required or directed by supervisor, • General housekeeping of equipment and plant daily or as directed by supervisor, • Individuals must be able to lift objects weighing 80 lb. on a regular basis, • The use of a shovel to move material will be necessary, • Perform all duties within safety guidelines set up by M.S.H.A. and company policy, • Perform pre-shift inspections on equipment prior to startup, • Perform other duties as assigned REQUIREMENTS • Applicants must be at least 18 years old, • High school diploma or GED, • Minimum of 3+ years' experience with D8-D9 dozers and 345-352 excavators, • Must have GPS experience, Trimble experience preferred, • Must have experience operating heavy equipment at 30-85% grade on sheer rock conditions, • Must be able to pass a Government Background Check, • Must hold an M.S.H.A. 5000-23 certificate, • Able to operate equipment efficiently to maintain project specifications, • Team player, • Mechanical knowledge of equipment and being able to perform routine maintenance, • Basic knowledge of welding and using a cutting torch, • Flexibility to work overtime or weekends if required Fisher Industries is an Equal Opportunity Employer. We are a drug-free work environment requiring pre-employment and random drug testing. Subject to background check. If you require an accommodation with applying, please email or call the HR Department at (701) 456-9184 to request accommodations. This email is only to request accommodation for the application process and is not an email to inquire about the status of your application. Job Posted by ApplicantPro

Job Description About the Company We’re a San Diego-based design-build playground company expanding into full-scope park and site development projects. Our team is passionate about creating safe, engaging, and sustainable outdoor environments—from playgrounds and splash pads to complete park renovations. As we grow our capabilities in public and private park construction, we’re seeking a seasoned estimator who understands the San Diego construction market and can bring strong relationships with local trade partners to the table. The Opportunity This is not your typical civil estimating role. We’re looking for someone who knows what it takes to build parks, plazas, and outdoor spaces—someone who can read a plan set and instantly picture how the trades come together. You’ll lead the estimating process for new park and site development projects, leveraging your understanding of local subcontractors and vendors to create accurate, competitive bids. Key Responsibilities * Estimate & Bid Preparation: Develop detailed, itemized estimates and competitive bid proposals for park and site work—including grading, utilities, concrete, landscaping, playground installation, and site amenities. * Trade Partner Collaboration: Source and maintain relationships with local subcontractors and suppliers, ensuring accurate pricing and trusted partnerships across all scopes. * Plan Review & Quantity Takeoffs: Perform detailed takeoffs and interpret drawings/specifications to confirm scope and identify opportunities for value engineering. * Cost Analysis: Research material pricing, labor productivity, and current market trends to ensure bids are both competitive and profitable. * Team Collaboration: Work closely with project managers, designers, and field teams to align estimating assumptions with real-world constructability. * Risk & Scope Review: Identify potential risks, exclusions, and gray areas early in the bidding process to minimize surprises later. * Bid Strategy: Assist in defining bid strategy, scope packages, and alternate proposals to give the company a winning edge. What You’ll Bring * Experience: 8+ years of estimating experience in site development, park, landscape, or civil construction. Experience with playgrounds, recreational facilities, or outdoor environments is a strong plus. * Market Knowledge: Existing relationships with San Diego trade contractors (grading, concrete, utilities, landscape, surfacing, etc.) and a solid understanding of local pricing and permitting nuances. * Technical Skills: Proficiency with estimating tools such as Bluebeam, HCSS HeavyBid, PlanSwift, or similar. Strong Excel and general computer skills are a must. * Education: Degree in Construction Management, Civil Engineering, or equivalent practical experience. * Mindset: Detail-oriented, collaborative, and entrepreneurial—you enjoy building systems and helping a growing company establish its estimating foundation. Why Join Us * Competitive base salary ($110,000–$150,000+ DOE) * Performance bonuses (5–15% of base) * Health, dental, and vision insurance * 401(k) with company match * Paid time off and professional development opportunities * Hybrid flexibility with local site visits in San Diego

Job Description Fisher Industries is a vertically integrated family of businesses that provides heavy civil construction and aggregate products across the United States. With over 70 years of experience, the company specializes in highways, bridges, aggregates, and large-scale infrastructure projects, supported by in-house capabilities in drilling, blasting, crushing, asphalt, and concrete production. Fisher is committed to delivering innovative, cost-effective solutions with an emphasis on safety and quality. As a proven industry leader, Fisher Industries continues to grow while maintaining the integrity and values of a family-owned company. For additional information about our company, visit our website at PRIMARY SCOPE The Site Safety & Health Officer works on US Army Corps of Engineer project(s). The SSHO must plan, schedule, and prepare for work to reduce and eliminate hazards in advance. This role is the "competent person" on site and provides safety direction while ensuring adherence to all safety regulations and programs with the Site Supervisor. The SSHO must build a culture of personal awareness and safety accountability. This position requires a constant presence at the assigned jobsite during all active work hours. The position requires extensive travel and a willingness to work on a demanding schedule including nights and weekends, as required, to meet project objectives. PRIMARY DUTIES • Conduct comprehensive on-site hazard and risk assessments; safety audits; accident investigations; and equipment inspections to mitigate risk, • Partner with the project managers and site safety representatives to interpret, evaluate, and provide technical guidance on project safety requirements, accident investigation, and implementing corrective action measures, • Develop and conduct onsite worker training on safety laws and regulations, hazardous condition monitoring, Activity Hazard Analysis (AHA), and use of safety equipment at job site locations, • Monitor compliance with EM 385-1-1, OSHA, EPA, and DOT regulations in accordance with statutory and contractual requirements, • Administer and manage the substance abuse testing and occupational health programs for the organization, • Compile, analyze, and report statistical data related to occupational illnesses and accidents as required, • Assist with detailed incident investigations and root cause analysis, compliance reviews, general risk assessments and other employee health and wellness evaluations, to support health, safety and environmental management initiatives, • Safety, Safety, Safety comply with all USACE and company policies, procedures, and standards of safety, • 5 years of experience as a construction safety professional in heavy construction, • Current OSHA 30-hour in construction certification, • Current First aid CPR, • Current competent person training in; fall protection, excavation, confined space and lockout/tagout, • Prior experience working with USACE preferred, • Must have current EM 385-1-1 SSHO certificate, • Proficient in MS Office, Bluebeam, • Must have ability to wear full construction PPE to include fall arrest harnesses or respirators, • Must be able to lift and carry up to 50 lbs., • Acceptable MVR in accordance with Fisher's Company Vehicle Program policy, • Ability to complete work tasks under various adverse weather conditions including heat above 100 degrees, cold, and rain, • Ability to pass a pre-employment drug test and government background check We are a drug-free work environment requiring pre-employment and random drug testing. Subject to background check. If you require an accommodation with applying, please email or call the HR Department at (701) 456-9184 to request accommodations. This email is only to request accommodation for the application process and is not an email to inquire about the status of your application. Job Posted by ApplicantPro

Job Description DIRECT HIRE OPPORTUNITY Job Description We are seeking a skilled CAD Drafter / Modeler to support large-scale design/build projects involving complex mechanical, structural, and electrical systems. This position is ideal for someone who enjoys working on detailed assemblies, technical drawings, and collaborating closely with engineers and project teams to bring unique designs to life. Hours Monday - Friday 7:00AM - 3:30PM Pay $77,000 - $138,000 annually Job Duties • Develop and update 3D models, detailed part drawings, and full assembly layouts for complex systems and equipment., • Create construction, fabrication, and installation drawings for mechanical, civil, structural, and electrical disciplines., • Prepare Piping & Instrumentation Diagrams (P&IDs), piping layouts, and tubing assemblies following ASME standards., • Generate pressure vessel and weldment drawings with accurate dimensions, tolerances, and material specifications., • Support engineers by converting design concepts into manufacturable models and assemblies., • Perform BOM creation and management, ensuring all components, fasteners, and subassemblies are properly detailed for procurement., • Collaborate with engineers and project managers to review designs for accuracy, manufacturability, and safety compliance., • Work directly with vendors and fabrication teams to resolve design challenges, review redlines, and verify drawing accuracy., • Manage drawing tree structures, revision histories, and documentation control within PLM or ERP systems., • High school diploma or equivalent required; degree or certification in CAD, mechanical design, or related field preferred., • 5+ years of experience as a CAD Drafter, Designer, or Modeler in a manufacturing, engineering, or fabrication environment., • Advanced proficiency with Autodesk Inventor 2019 or newer and AutoCAD 2019 or newer., • Hands-on experience with P&ID drafting and assembly design required., • Familiarity with ASME piping, pressure vessel codes, and mechanical fabrication standards preferred., • Strong understanding of dimensioning, tolerancing, and GD&T practices., • Working knowledge of PLM/ERP systems for BOM management and revision control., • Proficient in Microsoft Outlook, Excel, Word, and Adobe Acrobat., • Excellent communication skills and attention to detail, with the ability to manage multiple projects and deadlines.Company DescriptionOur Professional Division works with clients as a stakeholder in their hiring strategy and process. We facilitate a solid match for our employees and clients, examining the experience and team dynamics required for a great match. Our professional team was handpicked from 25 years of recruiting and staffing experience to build our Professional team to be the best in the industry. We focus on professional placements in your Executive Placement, Accounting & Finance, Human Resources, and Administrative Support areas. We place candidates leveraging direct hire, contract-to-hire, contingent, and “Smart Hire” modalities.Our Professional Division works with clients as a stakeholder in their hiring strategy and process. We facilitate a solid match for our employees and clients, examining the experience and team dynamics required for a great match. Our professional team was handpicked from 25 years of recruiting and staffing experience to build our Professional team to be the best in the industry. We focus on professional placements in your Executive Placement, Accounting & Finance, Human Resources, and Administrative Support areas. We place candidates leveraging direct hire, contract-to-hire, contingent, and “Smart Hire” modalities.

Job Description PM2CM, Inc., (Project Management to Construction Management) is a professional services company dedicated to providing Program and Project Management, Construction Management and Project Controls services during the design and construction phase of projects. Our core expertise is in Project Controls which includes Scheduling, Cost Controls, Document Management and Controls, Budget tracking and monitoring, Estimating, Risk Analysis, Claims avoidance and Mitigation, Change Management and Earned Value Management. Position is located in Pomona, California. Hybrid-Remote (Tuesday and Wednesday in the office/field) The Project Controls Advisor leads the effort to consolidate scope and cost for projects ranging from ~$25M to $1B+. This role will ensure projects follow the governance process and assist the Project Manager with receiving executive approval for projects throughout their lifecycle. In addition to aggregating and reporting on estimated project costs, the position will develop responses to regulatory and legal data requests as it pertains to the estimated costs. The advisor will be a subject matter expert on project estimation and aggregation methodology, including risk and contingency application. • Work with Project Management, Project Controls, Engineering, Finance, Law, Regulatory, and others to:, • Plan, schedule, and manage the process for gathering scope and cost for project aggregations at each stage gate from all disciplines., • Analyze cost estimates to verify that they are in-line with historical benchmarks for projects with comparable scope. Investigate rationale and drivers for estimates that are out-of-line with historical costs or expectations with estimators from functional groups, • Manage supporting documentation for stage gate updates and regulatory filings, • Peer review project aggregations. Operate with minimal supervision., • Develop Cost Estimates for new Transmission & Distribution Substations, Rebuild/Expansion of Substations, Major Equipment Replacements, Protection Upgrades/SA3, and new Customer Substations., • Prepare scope take‐off based on Design Specification, Meeting Minutes/Scope of Work, and Electrical & Civil drawings., • Estimate material & labor costs applied estimating standards for direct & indirect costs and prepare estimates into Cost Estimating Tools i.e., SCMT and InEight., • Collaborate among cross functional impacted stakeholders and utilized Engineering, Cost Estimating, Scheduling and Project Management knowledge to review cost estimates and obtained approvals., • Perform detailed variance analysis for cost estimates at various stages of project life cycle. Prepare & updated estimates based on change requests for scope, cost & Schedule. Required Skills/Abilities: • Minimum of one year construction industry experience., • Understanding of civil engineering principles, practices, and tools., • Proficient in computer-assisted design (AutoCAD) and other design, data recording, and analyzation software., • Ability to read, interpret and understand engineering plans and schematics, and soils reports., • Capability to visualize the finished grade production., • Knowledge of Best Management Practices (BMP)., • Understanding of materials, methods, and tools involved in the construction or repair of buildings., • Understanding of safety regulations related to assigned projects., • Ability to identify and solve complex problems., • Excellent verbal and written communication skills., • Ability to be both creative and analytical., • Extremely detail-oriented and accurate. Benefits Education and Experience: Bachelor's degree in civil engineering or eq required.

Job DescriptionAre you ready to design and build something that lasts? At DN, we don’t just construct tanks—we engineer resilience, reliability, and innovation into every project in order to protect the world’s most precious resource. We are seeking a Structural Engineer to join our team, bringing expertise, creativity, and problem-solving skills to our industry-leading water solutions. At DN, we push the boundaries of structural engineering to create durable, long-lasting concrete storage tanks for all water. Our projects span across the country, providing critical infrastructure that supports communities and businesses. We are committed to excellence, teamwork, and forward-thinking solutions.What You'll Do: • Design and analyze environmental concrete tank structures using industry best practices., • Conduct structural calculations, modeling, and load analysis to optimize performance and durability., • Utilize FEA modeling software to streamline designs, • Collaborate with construction teams and project managers to ensure design integrity from concept to completion., • Engage in problem-solving and troubleshooting during project execution., • Stay ahead of industry advancements and integrate new technologies into designs.Who You Are:, • An engineer who thrives on structural challenges., • Holds a Bachelor’s or Master’s degree in Structural Engineering or Civil Engineering (PE license a plus)., • Experienced in concrete and structural analysis., • Proficient in SAP 2000/SAFE, MS products, AutoCAD, and structural modeling software., • A strong communicator and critical thinker who enjoys working in a team-driven environment.What We Offer:, • Opportunities for career growth and professional development., • The chance to make a lasting impact in infrastructure engineering. Note to Third-Party Agencies We request that third-party agencies refrain from contacting us regarding this job posting. We are managing the recruitment process internally and will not be considering applications or services from external agencies. Thank you for respecting our recruitment process.

Job DescriptionAre you ready to design and build something that lasts? At DN, we don’t just construct tanks—we engineer resilience, reliability, and innovation into every project in order to protect the world’s most precious resource. We are seeking a Structural Engineer to join our team, bringing expertise, creativity, and problem-solving skills to our industry-leading water solutions. At DN Tanks, we push the boundaries of structural engineering to create durable, long-lasting concrete storage tanks for all water. Our projects span across the country, providing critical infrastructure that supports communities and businesses. We are committed to excellence, teamwork, and forward-thinking solutions.What You'll Do: • Design and analyze environmental concrete tank structures using industry best practices., • Conduct structural calculations, modeling, and load analysis to optimize performance and durability., • Utilize FEA modeling software to streamline designs, • Collaborate with construction teams and project managers to ensure design integrity from concept to completion., • Engage in problem-solving and troubleshooting during project execution., • Stay ahead of industry advancements and integrate new technologies into designs.Who You Are:, • An engineer who thrives on structural challenges., • Holds a Bachelor’s or Master’s degree in Structural Engineering or Civil Engineering (PE license a plus)., • Experienced in concrete and structural analysis., • Proficient in SAP 2000/SAFE, MS products, AutoCAD, and structural modeling software., • A strong communicator and critical thinker who enjoys working in a team-driven environment.What We Offer:, • Opportunities for career growth and professional development, • The chance to make a lasting impact in infrastructure engineering

Job Description Position: Electrical Engineer III Location: Overland Park, KS / San Diego, CA / Westminster, CO / Milwaukee, WI / Irvine, CA / Albuquerque, NM / Avon, CO / Lakewood, CO / St. Louis, MO / Belleville, IL / Schaumburg, IL Years of Experience: 5+ Years About RTM: RTM Engineering Consultants is an MEP, Civil and Structural engineering firm that goes beyond the conventional consulting role. We forge deep partnerships with our clients by aligning with the goals, processes and people at each organization. By integrating our expertise, we offer a comprehensive suite of national resources combined with localized relationships, delivering exceptional value to our clients. At RTM Engineering Consultants, we prioritize the well-being and growth of our team members. Our commitment to professional development is evident through hands-on mentoring, opportunities for advancement, and access to RTM University. With integrated multi-disciplinary studios, you'll collaborate with experts of all levels and various disciplines. We continuously foster a positive team culture through outings that strengthen the bonds of our teams and at RTM, giving and taking are fundamental values. We believe in giving our best, contributing to others, and embracing diversity and equality for progress. Join our dynamic and inclusive team where your well-being, growth, and contributions are valued. Our Team: At RTM, we hold a profound appreciation for our workforce. We firmly believe that YOU, our team members, are our most valuable asset and are instrumental in defining our organization. Our dedication lies in delivering experiences that foster your growth and success, whether you are just embarking on your career path or have attained seasoned expertise. Guided by our CORE values of Collaborative Communication, Overall Unity, Respect and Trust, and Excellence in Engineering, we forge a unified team that consistently pursues professional achievement in all endeavors we undertake. RTM is proud to offer a comprehensive benefits package designed to promote employee health, wellness, and financial security. Our offerings include medical, dental, and vision plans, employee assistance program, disability coverage, life insurance, 401(k) and profit sharing, flexible work schedule, paid time off and training and development courses. Benefits of Joining RTM: • Responsible Time Off (RTO) & Paid Holidays, • Flexible Scheduling, • 401K with Matching, • Health, Dental, Vision, & Life Insurance, • Hands-on Mentoring & Learning, • Professional Advancement Opportunities Applies electrical design knowledge, skill and ability to create construction drawings for the project owner and provides continuous professional support throughout the entire construction process. Serves as the primary liaison responsible for coordination and communication activities between the design team and the client/customer and provides project management oversight and professional support throughout the entire construction process. Key Responsibilities: • Provides complete management of project timelines and related design activity communication between the design team and the client/customer, accurately & timely, • In accordance with company standards, provides assistance in the preparation of accurate and complete proposals and engineering agreements, • Accurately and timely produces electrical design elements consistent with project specifications in accordance with the project hours, scope & parameters, • Produces electrical construction documents appropriate for permitting based on project specifics, • Provides research design options consistent with project requirements, • Produces accurate and complete engineering project specifications within project parameters, • Accurately and consistently execute QA/QC process, • Provide project coordination with in house and outside sources, • Provides timely consultation on projects to manage schedules, deadlines, site surveys, punch lists, building codes and standards consistent with company quality standards, • Actively participates in post design consultation activities and represents the company in client meetings through construction completion, • Assists in the preparation of other documents germane to a project with enthusiasm and professionalism, • Responsible for on-boarding and overseeing junior engineers, • Actively mentors junior engineers and designers, • Provide timely billing of projects to accounting department, • Follows established work rules, policies and procedures, • Actively engages with other members of the company to continuously strive to improve processes, create efficiencies and reduce costs, • 4-year degree in Engineering required, • Minimum of 5 years’ experience, • Expert knowledge of building codes and standards, • Knowledge of engineering drafting standards, • Knowledge of electrical engineering standards and other trades, • Demonstrable understanding of construction process and interpretation of construction drawings., • Knowledge of AutoCad, • Knowledge of Revit Equal Employment Opportunity: It is the policy of RTM Engineering Consultants to practice a program of equal employment opportunity, and advancement opportunities are made available to all employees on the basis of individual qualifications without regard to race, religion, color, national origin, disability, age or gender. At this time, only candidates authorized to work in the United States of America without the need for sponsorship will be considered. RTM does not currently accept unsolicited resumes through or from search firms or recruiters.

Job DescriptionCompany Description At Coffman Engineers, we serve as both prime consultant and sub consultant on projects large and small, including commercial, retail, institutional, government, industrial, and project/construction management. Incorporated in 1979, we have employees in more than 23 locations serving clients across the United States and overseas. To meet client objectives and to integrate our many disciplines, we can create teams comprised of civil, structural, mechanical, electrical, fire protection, and corrosion control, as well as project/construction managers and professionals in a variety of specialty services. This ability has made us a leader in the engineering and construction communities, and has strengthened our reputation as being progressive, innovative, and a great place to work. Job Description Compensation and Benefits: • Expected Base Salary: $100,000.00 to $150,000.00, depending on education, experience, and licensure., • Paid overtime at 1.0 times hourly rate., • Competitive end-of-year discretionary bonus based on company/team/personal performance., • Hybrid work schedule (subject to change)., • Perform and may oversee structural analysis, design, and detailing on a variety of projects., • Collaborate with the architect, owner, and contractor to provide a well-coordinated and high-quality set of structural drawings., • May lead a team of engineers, designers, and drafters to execute structural designs., • Meet with the project team to ensure effective communication flow during design., • Interest and ability to advance to a senior engineer or project manager position.Qualifications KNOWLEDGE, SKILLS & ABILITIES • Experience with computer analysis software systems., • Excellent leadership, supervisory, and writing and verbal communication skills., • Comfortable consulting to architectural practices., • Ability to build and maintain a strong team of professionals and support staff within a cooperative multidiscipline office performing at a high level of satisfaction to clients., • Possess strong critical thinking, organizational, and analytical abilities., • B.S. degree in Civil or Structural engineering required., • Master’s degree in structural engineering preferred., • Minimum of 5 years of professional experience with the structural design of buildings or similar structures., • Registration as a P.E. required. This position is not eligible for sponsorship. Additional Information Why You Want To Work Here Coffman Engineers is a company that truly focuses on its employees. We support and encourage individually tailored professional and technical advancement as well as personal growth. We offer an excellent salary/benefits package, a desirable location, and a professional office environment with the opportunity to work with a collaborative team. Our offices provide several engineering discipline services, which work together collaboratively to provide complete engineering design packages. Coffman offers a flexible schedule and this position may be eligible for PTO, a fun office environment with a high-performing team and a fully stocked kitchen! We welcome the dedicated and the driven. Join us. Don’t take our word for it. Check out what others are saying: Coffman at a Glance: • 46 years in business, • 850+ employees serving clients throughout the U.S. and overseas from more than 23 locations, • Multi-discipline engineering services plus corrosion control, commissioning and project/construction management, • Zweig Group Hot Firm List, Zweig Group, 2021, • Top 500 Design Firms, Engineering News-Record, 2022, • Top Workplace (Small), The San Diego Union-Tribune, 2020, 2021, 2022, 2023, 2024, • Best Places to Work (Large), San Diego Business Journal, 2021, 2022, 2023, 2024, 2025 You must apply online for this position. If you are unable to complete our online application process, or if you need assistance to do so, let us know so we can provide reasonable accommodation. If you are experiencing problems applying through our system, please try again using a different browser or an updated version of your current browser. If that doesn't work, please contact us directly. This position is direct with Coffman Engineers; we are an Equal Opportunity Employer. We do not discriminate on the basis of any status protected under federal, state, or local law. Follow Us! Twitter: @CoffmanEngineer Instagram: @CoffmanEngineers LinkedIn: Facebook: @CoffmanEngineers

Job DescriptionSummary Are you an Electrical Engineer with 10+ years of experience looking to grow your career? Our client, in San Diego, is an award-winning engineering firm that has been named "Best Place to Work" for the past 15 years. Duties and Responsibilities • Pre-Design Engineering, • Perform field surveys for the design of electrical systems, gather information, and prepare site assessment reports, • Prepare electrical schematic designs, • Design Engineering, • Design power single line and riser diagrams, • Perform electrical calculations (arc flash, coordination, short circuit, voltage drop, load flow) using ETAP/SKM, • Lighting fixtures and power equipment selection, • Perform lighting and power circuiting, • Design and coordinate the lighting control system, • Prepare fire alarm device layout based on the International Fire Code and NFPA 72, • Design fire alarm riser diagrams, calculations, and sequence of operations, • Prepare enlarged plans, elevations, schedules, and details, • Understand and utilize CAD/BIM standards, • Have a working knowledge of California Electrical Code and Energy Standards to design medium voltage and low voltage electrical systems, • Coordination among different disciplines, such as mechanical, plumbing, telecom, civil, structural, and architectural. Work in close contact with the entire design team, • Edit specifications for projects, • Project Management, • Demonstrate ability to manage multiple large-size projects involving other senior engineers and sub-consultants, • Provide mentorship to design engineers, • Prepare proposals independently for clients, • Demonstrate active development of business with new and existing clients, • Construction Administration, • Review and respond to RFI’s, • Review equipment submittals, • Degree: Bachelor or Master degree in Electrical Engineering, • Registered Professional Engineer License required, • Minimum 10 years experience preferred, • Ability to manage projects, PM experience preferred, • Able to lead electrical design projects and a team of design engineers, • Demonstrate project management skills., • Experience using AutoCAD, ETAP/SKM, and Revit required, • Familiar with HCAI requirements, • Be self-motivated, inquisitive, detail-oriented, adept at looking at underlying issues, and willing to work in a fast-paced environment, • Possess strong record-keeping and organizational skills Benefits Upon eligibility, some of the benefits offered include: • 13 Observed Company paid holidays a year, • Medical, Dental, Vision Plans, • Employer-paid Group Life Insurance, • Supplemental Insurance Plans such as: Accident, Critical Illness, and Pet Insurance, • Tuition & Training Assistance, • 401(k) program offers immediate vesting and employer match is 100%, not exceeding 4% of employee compensation

Job Description Position: Electrical Engineer II Location: Orlando, FL / Dallas, TX / Newport, KY / Albuquerque, NM / Avon, CO / Lakewood, CO / Overland Park, KS / San Diego, CA / Westminster, CO Years of Experience: 3-5 Years About RTM: RTM Engineering Consultants is an MEP, Civil and Structural engineering firm that goes beyond the conventional consulting role. We forge deep partnerships with our clients by aligning with the goals, processes and people at each organization. By integrating our expertise, we offer a comprehensive suite of national resources combined with localized relationships, delivering exceptional value to our clients. At RTM Engineering Consultants, we prioritize the well-being and growth of our team members. Our commitment to professional development is evident through hands-on mentoring, opportunities for advancement, and access to RTM University. With integrated multi-disciplinary studios, you'll collaborate with experts of all levels and various disciplines. We continuously foster a positive team culture through outings that strengthen the bonds of our teams and at RTM, giving and taking are fundamental values. We believe in giving our best, contributing to others, and embracing diversity and equality for progress. Join our dynamic and inclusive team where your well-being, growth, and contributions are valued. Our Team: At RTM, we hold a profound appreciation for our workforce. We firmly believe that YOU, our team members, are our most valuable asset and are instrumental in defining our organization. Our dedication lies in delivering experiences that foster your growth and success, whether you are just embarking on your career path or have attained seasoned expertise. Guided by our CORE values of Collaborative Communication, Overall Unity, Respect and Trust, and Excellence in Engineering, we forge a unified team that consistently pursues professional achievement in all endeavors we undertake. RTM is proud to offer a comprehensive benefits package designed to promote employee health, wellness, and financial security. Our offerings include medical, dental, and vision plans, employee assistance program, disability coverage, life insurance, 401(k) and profit sharing, flexible work schedule, paid time off and training and development courses. Benefits of Joining RTM: • Responsible Time Off (RTO) & Paid Holidays, • Flexible Scheduling, • 401K with Matching, • Health, Dental, Vision, & Life Insurance, • Hands-on Mentoring & Learning, • Professional Advancement Opportunities Applies electrical design knowledge, skill and ability to create construction drawings for the project owner and provides continuous professional support throughout the entire construction process. Key Responsibilities: • Produces construction electrical documents appropriate for permitting based on project specifics, • Accurately and timely produces electrical design elements consistent with project specifications, • Accurately and timely produces design elements in accordance with the project hours, scope & parameters, • Produces accurate and complete load calculations within project parameters, • Provides research design options consistent with project requirements, • Selects appropriate equipment for project type, • Actively participates in post design activities through to construction completion, • Assists in the preparation of other documents germane to a project with enthusiasm and professionalism, • Follows established work rules, policies and procedures, • Actively engages with other members of the company to continuously strive to improve processes, create efficiencies and reduce costs, • 4-year degree in Engineering required, • Minimum of 3 years’ experience, • Demonstrable understanding of construction process and interpretation of construction drawings., • Knowledge of electrical engineering standards and other trades, • Knowledge of engineering drafting standards, • Knowledge of building codes and standards, • Knowledge and utilization of company & design standards, • Basic knowledge of software tools; i.e. SKM, lighting calcs, etc., • Knowledge of AutoCad, • Knowledge of Revit Equal Employment Opportunity: It is the policy of RTM Engineering Consultants to practice a program of equal employment opportunity, and advancement opportunities are made available to all employees on the basis of individual qualifications without regard to race, religion, color, national origin, disability, age or gender. At this time, only candidates authorized to work in the United States of America without the need for sponsorship will be considered. RTM does not currently accept unsolicited resumes through or from search firms or recruiters.

Job Description Founded in 1940 and headquartered in San Francisco, Degenkolb Engineers has more than eight decades of commitment to innovation, client service, and life-long learning. We deliver customized structural solutions in a variety of practice areas: healthcare, education, science and technology, forensics, construction engineering and federal buildings. We address every project need whether those needs are meeting stringent codes, meeting a bottom line, sticking to a hard construction schedule, or developing a structural system that creates a landmark. We’re hiring at the Senior Engineer level in our San Diego, LA, and Anaheim locations. If you are interested in joining our team and do not see your desired position on our "Job Openings" page, please send an email with a targeted cover letter expressing interest to: Our firm is highly collaborative and filled with experts who are united by a passion for industry involvement, pride in company ownership, and respect for our personal lives. You will benefit from focused professional development within a highly supportive and transparent team environment. We also offer a well-defined career path, opportunities for committee participation and leadership, a mentorship program, variety in work assignments, a comprehensive benefits package, and a pay scale set at the 75th market percentile. The annual salary range for this position, across the listed offices, generally ranges between $120,000 and $137,000. This range is a good faith estimate provided pursuant to the California Pay Transparency Law. Actual pay rates will be based on various factors, including company geographic differentials, education level and candidate qualifications. Benefits include health and life insurance, 401(k) with company Profit Sharing contribution, employee ownership in a privately held stock plan, a generous paid time off program and company holidays, commuter benefits, paid parental leave and financial support for professional activities. We offer a flexible hybrid work schedule! To learn more about the company culture and our approach to development, please visit our website using the link below: Job Summary: Facilitate the design and engineering of structural systems for building structures and facilities from pre-schematic phase through construction closeout with limited direction from senior technical staff. Responsibilities: • Determine project design decisions based on client and project requirements, such as load requirements, governing codes, architectural constraints, operational constraints, fabrication and erection requirements., • Apply advanced theoretical knowledge of civil and structural engineering principles and concepts., • Oversee work of junior engineers, designers and/or drafters in production of structural construction documents including drawings, specifications, bidding, and construction administration for projects., • Develop technical skills of junior staff with empathy and a genuine interest in the career progression of colleagues., • Perform structural calculations by applying appropriate system concepts and layouts., • Review RFI’s, submittals, and other construction related documents., • Manage multiple projects of moderate size or portions of major projects with minimal supervision from senior technical staff., • Participate in developing client proposals including preparing scope, budgets, and schedules for assignments., • Maintain close relationship with client during project development, execution, and completion., • Participate in client and design team meetings as well as plan review and approval processes., • Master's Degree in Structural Engineering and 5 - 7+ years relevant experience with a stable history., • California Professional Civil or Structural Engineering license., • Experience in the seismic design, seismic evaluation and retrofit of existing buildings in regions of high seismicity., • Ability to perform complex structural calculations such as linear and nonlinear analysis with minimal direction., • Demonstrated design skills with steel, concrete, masonry, and wood structures., • Familiarity with California Building Codes and ASCE 41 Standards., • Knowledge of some or all modeling applications: ETABS, RISA, RAM, Revit, MathCAD, SAP2000, AutoCAD, and TeklaPreferred Qualifications:, • California Structural Engineer license., • Active participation in professional activities related to structural or earthquake engineering., • Proficiency with one or more of the following software programs: Python, Rhino, or Grasshopper., • Participation in project teams for delivering complex HCAI projects., • Experience supervising, coordinating or mentoring junior staff. Degenkolb Engineers complies with Equal Opportunity Employer guidelines, meaning we do not discriminate in employment matters on the basis of race, color, religion, gender, national origin, age, military service eligibility, veteran status, sexual orientation, marital status, disability, or any other protected class. And we go beyond the laws - we are truly committed to increasing the diversity of our team and we value the different perspectives, skills, and experiences it brings to our firm.

Job Description HED is looking to add an experienced team member to our group of talented Structural Engineers. The candidate should have broad structural design expertise, with a focus on design and management of large, complex, and technical projects, and be enthused about joining HED’s shared commitment to Advancing Your World through Critical Thinking, Integrated Practice, and Design Excellence. Competitive salary and excellent benefits, including a flexible hybrid work schedule, are available. This position is open to individuals located near our offices in Dallas, Texas; Royal Oak, Michigan; San Francisco, Sacramento, or San Diego, California; or Boston, Massachusetts. ABOUT HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. ROLE & TYPICAL DUTIES • Structural Engineers at HED are responsible for building system concepts and the documentation process for projects at all scales from schematic design through construction administration, typically on multiple projects at one time., • Structural Engineers may function as a Discipline Team Leader, working in collaboration with our in-house A/E team, including the Project Manager and the Project Architect, to create and deliver Positive Impact for our clients, colleagues, and community., • This role includes responsibility for overseeing and supporting project team members within the structural engineering discipline, including on larger and more complex projects, spearheading the team’s efforts in achieving Design Excellence. Typical duties may include: • Leading the structural design and documentation efforts, including producing drawings, calculations, specifications and the production of material, product, and code-required research to support project development., • Document interpretation and submittal reviews during bidding and construction administration., • Monitoring staff to produce quality services within a project team concept, and in conformance with HED best practices., • Planning the structural discipline’s project efforts; including preparing and monitoring Discipline Work Plans., • Attending project meetings as necessary, representing the structural discipline to partners and clients., • Interfacing with other Discipline Team Leaders. QUALIFICATIONS • Minimum six years of technical design experience in Structural Engineering., • Experience with California PreK-12 (DSA) and Healthcare (HCAI/OSHPD) preferred, laboratory/life science, Mission Critical or other complex projects acceptable., • Professional Licensure required; SE encouraged, PE acceptable., • Bachelor's or master’s degree in Civil/Structural or Architectural Engineering required., • Extensive knowledge of all aspects of professional services from schematic design through project close-out, including design and technical expertise., • Commitment to understanding the coordination aspects and related requirements of all design disciplines., • Proficiency with ETABS, RAM, RISA, and other structural analysis software., • Ability to lead structural design teams (with some mentorship) including the ability to estimate hours and delegate work assignments., • Highly organized, with strong written and verbal communication skills., • Strong Revit skills., • Very detail-oriented, self-motivated, enthusiastic, and flexible., • LEED Accreditation preferred. PHYSICAL REQUIREMENTS • Capable of occasional travel to and from project sites (local, home state, and potentially other states) to attend client, project, and construction meetings., • Ability to access existing and new project sites for observation, investigation, and evaluation purposes., • Ability to use office equipment for communication and documentation purposes., • Visual acuity to perform responsibilities. #LI-DD1

Job DescriptionSummary Our client is an award-winning engineering firm recognized as a Best Place to Work for the past 15 years. They are seeking a Senior Electrical Engineer Healthcare with 10+ years of experience who is ready to take the next step in their career. This position is based in San Diego, CA, and offers the opportunity to lead complex healthcare projects within a collaborative and highly respected organization. Duties & Responsibilities * Pre-Design Engineering * Conduct field surveys to gather information for electrical system design and prepare site assessment reports. * Develop electrical schematic designs. * Design Engineering * Create power single line and riser diagrams. * Perform electrical calculations (arc flash, coordination, short circuit, voltage drop, load flow) using ETAP/SKM. * Select appropriate lighting fixtures and power equipment. * Complete lighting and power circuiting. * Design and coordinate lighting control systems. * Layout fire alarm devices according to International Fire Code and NFPA 72. * Develop fire alarm riser diagrams, calculations, and sequences of operation. * Prepare detailed plans, elevations, schedules, and design details. * Apply CAD/BIM standards and best practices. * Ensure compliance with California Electrical Code and Energy Standards for medium- and low-voltage systems. * Coordinate designs with mechanical, plumbing, telecom, civil, structural, and architectural disciplines. * Edit and finalize project specifications. * Project Management * Lead multiple large-scale projects, collaborating with senior engineers and sub-consultants. * Mentor junior and mid-level design engineers. * Independently prepare client proposals. * Support business development and strengthen client relationships. * Construction Administration * Review and respond to RFIs. * Evaluate equipment submittals. * Perform punch walks and prepare punch lists. Qualifications & Requirements * Education & Licenses * Bachelors or Masters degree in Electrical Engineering. * Professional Engineer (PE) license preferred. * Experience * Minimum 10 years of relevant electrical engineering experience. * Proven ability to lead projects and manage design teams. * Demonstrated project management capabilities. * Skills & Technical Knowledge * Proficient with AutoCAD, ETAP/SKM, and Revit. * Knowledge of HCAI requirements. * Highly self-motivated, detail-oriented, and able to anticipate and resolve design issues. * Strong organizational skills and record-keeping. * Comfortable working in a fast-paced, dynamic environment. Benefits & Schedule * Hybrid Schedule: 3 days in office / 2 days remote • 13 company-paid holidays per year Medical, dental, and vision coverage * Employer-paid group life insurance * Optional supplemental insurance (Accident, Critical Illness, Pet Insurance) * Tuition and professional development assistance * 401(k) with 100% employer match up to 4% and immediate vesting Employment Type: Full time Location: San Diego, CA

Job DescriptionBenefits: • 401(k), • Competitive salary, • Dental insurance, • Employee discounts, • Flexible schedule, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance About Us: 120 Degreez MEP Engineering Firm is a leading provider of mechanical, electrical, and plumbing (MEP) engineering solutions. We specialize in delivering innovative and sustainable MEP designs for a wide range of projects, including commercial, multifamily, mixed-use, life science, and industrial developments. Our team is dedicated to pushing the boundaries of engineering excellence while maintaining a commitment to environmental sustainability, building code compliance, and client satisfaction. Job Description: As a Senior Electrical Engineer at 120 Degreez, you will be responsible for leading the design, analysis, and implementation of electrical systems for complex and high-profile projects. This position offers an exciting opportunity to apply advanced technical expertise, guide project teams, mentor junior staff, and play an integral role in the continued growth and success of our firm. Responsibilities: • Lead the design and coordination of electrical systems, including power distribution, lighting, fire alarm, communications, and other low-voltage systems for a variety of building types., • Perform and review load calculations, short-circuit studies, voltage drop, lighting calculations, and energy code compliance documentation using industry-standard software and methodologies., • Develop and oversee electrical plans, specifications, and construction documents ensuring compliance with applicable codes, standards, and project requirements., • Review contractor submittals, RFIs, and shop drawings to verify conformance with design intent, specifications, and governing regulations., • Provide technical mentorship and oversight to junior engineers and drafters, promoting professional growth and ensuring consistency in design quality., • Coordinate electrical systems with mechanical, plumbing, structural, architectural, and civil disciplines to ensure complete and conflict-free design integration., • Conduct site visits and field observations during design and construction to verify installations, troubleshoot design challenges, and ensure project quality and accuracy., • Collaborate with clients, architects, and contractors to develop cost-effective, energy-efficient, and code-compliant electrical solutions that meet project objectives., • Stay current with California Electrical Code (CEC), Title 24 Energy Standards, NFPA, and emerging technologies in lighting, power systems, and sustainable electrical design.Qualifications:, • Bachelors degree in Electrical Engineering or a related discipline from an accredited institution., • Minimum of 7 years of progressive electrical design experience, with demonstrated ability to lead projects from conceptual design through construction administration., • PE license (or ability to obtain licensure within a reasonable timeframe)., • Proficiency in AutoCAD, Revit, and electrical design software such as SKM PowerTools, ETAP, or equivalent analysis tools., • In-depth understanding of California Electrical Code, Title 24, and best practices for lighting, power distribution, and life-safety systems., • Strong analytical, organizational, and problem-solving skills with exceptional attention to detail., • Proven ability to mentor junior engineers, manage project deadlines, and coordinate effectively with multidisciplinary design teams., • Competitive salary commensurate with experience., • Comprehensive health, dental, and vision insurance coverage., • 401(k) retirement plan., • Paid Time Off (PTO) and company holidays., • Flexible work schedule in a supportive, collaborative environment., • Employee Assistance Program., • Professional development and continuing education support. Other Information 120 Degreez is an Equal Opportunity Employer committed to fostering diversity and inclusion. We prohibit discrimination and harassment based on any protected characteristic as defined by federal, state, or local laws. All employment decisions are based on qualifications, merit, and business needs.

Job DescriptionSummary Are you an Electrical Engineer with 10+ years of experience looking to grow your career? Our client, in San Diego, is an award-winning engineering firm that has been named "Best Place to Work" for the past 15 years. Duties and Responsibilities • Pre-Design Engineering, • Perform field surveys for the design of electrical systems, gather information, and prepare site assessment reports, • Prepare electrical schematic designs, • Design Engineering, • Design power single line and riser diagrams, • Perform electrical calculations (arc flash, coordination, short circuit, voltage drop, load flow) using ETAP/SKM, • Lighting fixtures and power equipment selection, • Perform lighting and power circuiting, • Design and coordinate the lighting control system, • Prepare fire alarm device layout based on the International Fire Code and NFPA 72, • Design fire alarm riser diagrams, calculations, and sequence of operations, • Prepare enlarged plans, elevations, schedules, and details, • Understand and utilize CAD/BIM standards, • Have a working knowledge of California Electrical Code and Energy Standards to design medium voltage and low voltage electrical systems, • Coordination among different disciplines, such as mechanical, plumbing, telecom, civil, structural, and architectural. Work in close contact with the entire design team, • Edit specifications for projects, • Project Management, • Demonstrate ability to manage multiple large-size projects involving other senior engineers and sub-consultants, • Provide mentorship to design engineers, • Prepare proposals independently for clients, • Demonstrate active development of business with new and existing clients, • Construction Administration, • Review and respond to RFIs, • Review equipment submittals, • Degree: Bachelor or Master degree in Electrical Engineering, • Registered Professional Engineer License required, • Minimum 10 years experience preferred, • Ability to manage projects, PM experience preferred, • Able to lead electrical design projects and a team of design engineers, • Demonstrate project management skills., • Experience using AutoCAD, ETAP/SKM, and Revit required, • Familiar with HCAI requirements, • Be self-motivated, inquisitive, detail-oriented, adept at looking at underlying issues, and willing to work in a fast-paced environment, • Possess strong record-keeping and organizational skills Benefits Upon eligibility, some of the benefits offered include: • 13 Observed Company paid holidays a year, • Medical, Dental, Vision Plans, • Employer-paid Group Life Insurance, • Supplemental Insurance Plans such as: Accident, Critical Illness, and Pet Insurance, • Tuition & Training Assistance, • 401(k) program offers immediate vesting and employer match is 100%, not exceeding 4% of employee compensationEmployment Type: Full time Location: San Diego, CA

Job DescriptionDescription: As a Project Environmental Engineer or Scientist, you will be responsible for planning, performing, and managing fieldwork to collect environmental data (soil, sediment, groundwater, and vapor), performing and managing oversight of cleanup construction, lead efforts related to multimedia compliance, evaluating and interpreting environmental data, performing engineering and scientific analysis and evaluation, preparing cleanup documents including work plans, reports and design (design drawings, specifications, and engineers estimate), managing projects/tasks, and mentoring junior staff. Performs duties in collaboration with senior engineers/geologists. Essential Duties and Responsibilities • Plan, perform, and manage field explorations and environmental data (soil, sediment, groundwater, and vapor) collection efforts. Field explorations may include drilling and test pitting to collect soil samples, sediment grab sampling and coring, and monitoring well installation and collection of groundwater samples., • Lead efforts related to multimedia compliance (predominantly construction and industrial stormwater, but air and wastewater are included). This includes permitting, monitoring, and reporting across construction and operational phases., • Evaluate and interpret field and laboratory environmental data, perform engineering/scientific analysis and evaluation, and develop solutions to complex problems., • Evaluate the fate and transport of environmental contaminants in various media including soil, sediment, groundwater, and vapor, and develop conceptual site models to evaluate contaminant exposure pathways to receptors., • Prepare remedial investigation work plans, sampling and analysis plans, data reports, remedial investigation/feasibility study (RI/FS) reports, cleanup action plans, and remedial action completion reports on environmental remediation projects involving multiple contaminated media including soil, sediment, groundwater, and vapor., • Prepare design documents and supporting deliverables, including engineering calculations, design drawings, specifications, and engineers' estimate., • Prepare permit applications and coordinate with regulatory agencies in obtaining project permits., • Support clients with project bidding/contract solicitation, and contractor selection process for cleanup construction., • Perform management and oversight of cleanup construction involving remedial excavation, dredging of contaminated sediment and wood debris, installation of sediment caps, installation, operations and maintenance of in-situ remediation systems and site restoration activities., • Provide project closeout and long-term monitoring support on environmental remediation projects., • Perform project and task management duties, such as developing scopes of work and budgets, coordination with clients, subcontractor solicitation, invoicing, cost control, and contract reviews., • Communicate effectively with clients, regulators, contractors and project staff through the lifecycle of a project., • Mentor and train junior staff., • Bachelor’s degree in civil/environmental engineering or geology. Master’s degree preferred., • 5 to 10 years of environmental consulting or related professional experience., • QSD or QSP certification preferred., • PE license required., • Ability to prepare proposals, work plans, data reports, remedial investigation/feasibility study (RI/FS) reports, and design (design drawings, specifications and engineers' estimate) under a senior engineer’/geologist’s supervision., • QISP certification is preferred., • Familiarity with Local, State, and Federal permitting processes applicable to environmental cleanup projects is preferred., • Strong project management and technical environmental skillset preferred., • Ability to consistently meet tight deadlines in a fast-paced work environment., • Works well independently and collaboratively as part of project teams and GeoEngineers’ environmental group., • Strong verbal and written communication and technical writing skills., • A valid driver’s license is required., • All candidates are subject to completing a background check, and reference check., • All candidates are required to participate in our medical surveillance program., • Ability to perform a wide range of physical activities and do heavy work including exerting up to 50 pounds of force on occasion., • Ability to perform consistent work on a PC with prolonged sitting and view of a monitor/screen., • Ability to travel for short-term and long-term assignments as needed. At GeoEngineers, investing in our people is a top priority. In addition to competitive and equitable pay, we are proud to offer a wide range of benefits to support employees and their families, including healthcare (with travel benefit for care not locally available), 401(k) with company match, short-term and long-term disability, life insurance, wellbeing benefits, paid vacation and sick time and paid holidays, among others. View our full listing of benefits here. Our Commitment to Belonging at GeoEngineers When people feel they can bring their whole selves to work, that they have a voice and are supported and respected, it creates trust and a feeling of belonging— employees then flourish, grow their careers, and do the best work of their lives. A culture of belonging allows our employees to thrive and our company to prosper. This is a journey, and we are committed to doing the work, learning and evolving as we go. GeoEngineers is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations, and ordinances. GeoEngineers is also committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or accommodation while seeking employment, please contact Human Resources at or by phone at (425) 861-6000. We will then make a determination regarding your request for reasonable accommodation on a case-by-case basis. We welcome and encourage individuals from all backgrounds and experiences to apply for openings on our team. We would love for you to join us! We care about your privacy. Read GeoEngineers’ Privacy Notice for details on our personal data policies. Requirements:

Job DescriptionJob Title: Director of Plumbing EngineeringLocation: Full-time, on-site in Downtown San Diego, 92101 About Us: 120 Degreez MEP Engineering Firm is a leading provider of mechanical, electrical, and plumbing (MEP) engineering solutions across California and beyond. We specialize in designing innovative and sustainable systems for commercial, multifamily, mixed-use, life science, and industrial developments. Our firm is dedicated to engineering excellence, environmental sustainability, and superior client service—delivering designs that meet the highest standards of performance, efficiency, and constructability. Job Description:The Director of Plumbing Engineering is responsible for leading and managing the firm’s plumbing engineering discipline. This senior leadership position oversees design quality, technical innovation, project delivery, and team development within the plumbing department. The Director ensures all designs comply with California building codes and sustainability standards while fostering collaboration across disciplines and maintaining strong client relationships. This role represents a unique opportunity for a technical expert and proven leader to shape the future of plumbing design excellence at 120 Degreez. Responsibilities:Leadership & Department Management • Lead the Plumbing Engineering Department, ensuring project quality, efficiency, and alignment with company goals., • Establish and maintain departmental design standards, documentation procedures, and best practices., • Oversee departmental budgeting, staffing, scheduling, and resource planning to meet profitability and workload targets., • Support business development efforts by providing technical input for proposals, interviews, and client presentations.Technical Oversight, • Provide technical leadership, review, and approval of plumbing system designs, drawings, and specifications., • Ensure full compliance with applicable codes and standards, including:, • Uniform Plumbing Code (UPC), • California Building Standards Code (Title 24 – Energy & Green Building Standards), • NFPA Requirements, • ASPE and ASHRAE Guidelines, • LEED / CALGreen / HCAI (OSHPD) requirements, as applicable, • Develop and evaluate system layouts for domestic water, sanitary waste and vent, storm drainage, natural gas, medical gas, and specialty systems., • Troubleshoot complex design or construction challenges and provide solutions aligned with performance and budget goals., • Champion sustainable and water-conserving designs, including greywater systems, low-flow technologies, and renewable system integration.Project Oversight & Coordination, • Oversee plumbing scopes for major or technically complex projects across multiple sectors., • Collaborate with mechanical, electrical, structural, architectural, and civil teams to deliver coordinated, integrated MEP solutions., • Implement and enforce QA/QC procedures to ensure design accuracy, completeness, and constructability., • Participate in project kick-offs, design reviews, and construction coordination meetings to ensure design intent and client satisfaction.Team Development, • Mentor and train plumbing engineers and designers to promote growth, technical competency, and leadership readiness., • Lead recruitment and hiring for the plumbing discipline; conduct performance evaluations and career development planning., • Encourage knowledge sharing, continuing education, and professional licensure among staff.Client & Stakeholder Relations, • Serve as the primary technical contact for plumbing-related issues with clients, consultants, contractors, and authorities having jurisdiction (AHJs)., • Address escalated project challenges with proactive solutions and maintain long-term client partnerships., • Review contracts to ensure plumbing scopes and deliverables are clearly defined and risks are appropriately managed., • Maintain thorough project documentation to mitigate risk and uphold quality standards., • Bachelor’s degree in Plumbing Engineering, Mechanical Engineering, or a related field (Master’s preferred)., • Minimum 15 years of progressive experience in plumbing engineering, including 5 years in a senior leadership role., • Active California PE license required., • Demonstrated success managing teams and delivering large, complex projects from concept through construction., • Advanced proficiency in AutoCAD, Revit, and plumbing design software tools., • In-depth knowledge of California Plumbing Code, Title 24, NFPA, ASHRAE, and sustainability standards., • Strong leadership, communication, and client-management skills with proven ability to inspire and guide high-performing teams., • Competitive salary commensurate with experience., • Comprehensive health, dental, and vision insurance coverage., • 401(k) retirement plan., • Paid Time Off (PTO) and company holidays., • Flexible work schedule in a supportive, collaborative environment., • Employee Assistance Program., • Professional development and continuing education support. Other Information 120 Degreez is an Equal Opportunity Employer committed to fostering diversity and inclusion. We prohibit discrimination and harassment based on any protected characteristic as defined by federal, state, or local laws. All employment decisions are based on qualifications, merit, and business needs.

Job DescriptionFedVet Construction is seeking an experienced Project Manager with proven success delivering federal construction projects for agencies such as the Naval Facilities Engineering Systems Command (NAVFAC), U.S. Army Corps of Engineers (USACE), National Park Service (NPS), Bureau of Reclamation (BOR), and the Department of Veterans Affairs (VA). The Project Manager will oversee all phases of construction, renovation, and repair projects, typically up to $20,000,000, ensuring compliance with federal specifications, safety standards, and contract requirements. This role requires strong administrative, leadership, and communication skills to manage budgets, schedules, subcontractors, and government processes while maintaining a focus on safety and quality. The Project Manager will lead a project team that includes the Superintendent, Quality Control Manager (QCM), Site Safety and Health Officer (SSHO), and Project Coordinators, while serving as the primary point of contact with federal clients. Responsibilities· Lead the successful execution of federal construction projects, ensuring adherence to project plans, specifications, and regulations.· Serve as the primary point of contact with federal clients including NAVFAC, USACE, NPS, BOR, and VA.· Direct and support the project team, including the Superintendent, Quality Control Manager (QCM), Site Safety and Health Officer (SSHO), and Project Coordinators.· Manage project scheduling, ensuring milestones are met and projects stay on track.· Develop and oversee project budgets, maintaining cost control and financial accountability.· Allocate resources effectively, including labor, equipment, and materials.· Procure materials and services in compliance with federal requirements.· Direct subcontractor activities, ensuring performance, compliance, and quality.· Ensure project safety and compliance with all federal safety regulations, fostering a safety-first culture.· Oversee quality control processes and facilitate inspections and certifications as required. · Provide regular updates to clients and stakeholders, addressing issues proactively.· Utilize Microsoft 365 for documentation, reporting, and communication.· Utilize Procore for project management workflows and subcontractor coordination.· Utilize USACE Resident Management System (RMS) for USACE projects. Requirements· Minimum 5 years’ experience as a Construction Project Manager in federal contracting, with direct experience delivering projects for agencies such as NAVFAC, USACE, NPS, BOR, and VA.· Proven experience leading and managing project teams, including Superintendent, QCM, SSHO, and Project Coordinators.· Demonstrated expertise in civil construction and tenant improvements.· In-depth understanding of federal construction processes, standards, and specifications.· Proficiency in Microsoft 365.· Proficiency in Procore for project management.· Proficiency in USACE RMS for USACE projects.· Strong organizational and leadership skills, with the ability to manage multiple projects simultaneously.· Excellent communication and interpersonal skills.· Valid California Driver’s License and ability to operate a company vehicle. Preferred Qualifications· Bachelor’s degree in Construction Management, Engineering, or a related field.· Construction Project Management Professional (CPMP) certification or equivalent.· OSHA 30-Hour Certification or equivalent.· Familiarity with LEED or sustainability initiatives. Benefits· Medical, Vision, Dental· 401k· Education Reimbursement· Company Vehicle How to ApplyTo apply, please submit your resume and a cover letter to . Please highlight your federal contracting experience, particularly with NAVFAC, USACE, NPS, BOR, and VA, as well as your proficiency in Microsoft 365, Procore, and USACE RMS. FedVet Construction is an equal opportunity employer. We value diversity and are committed to creating an inclusive environment for all employees.

Job Description Hazen and Sawyer is seeking a Senior Water Project Engineer/Manager for our San Diego office. As part of our design and process teams, you will be working on all phases of water projects from concept development, project planning, applied research, study, advising through detailed design, construction, and operations. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Your role will include project management, design, planning, operational support, and business development with a focus on water reuse and drinking water projects, • Supporting and developing proposal development., • Helping to identify, hire, supervise and mentor junior drinking water staff., • Direct coordination and collaboration with clients., • Coordination with internal technical specialists in all practice areas and discipline design professionals for project delivery., • Managing projects to meet client expectations, budgets, and quality requirements., • Following internal Hazen processes to ensure quality delivery of engineering projects for clients., • Technical responsibility for interpreting, organizing, executing, and coordinating assignments on small/medium/large projects., • Performing planning, studies, design, and support of projects through design, construction, and operation., • Bachelor's degree in civil/environmental engineering, • PE license, • 12+ years of experience in municipal water treatment, water quality, water treatment technology, or manufacturing, • Experience in successfully delivering projects spanning multiple years in collaborative, multi-disciplinary teams, • Proficient in all MS Office based computer software, • Excellent communication and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies, • Self-starter with attention to detail, • Strong organizational skills, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionOur culture is rooted in a shared vision — to help keep the world’s most precious resource safe — and in the core values that guide us in pursuing this vision and delivering on our mission to clients. We provide the highest quality liquid storage design and construction services at the best long-term value with an unrivaled customer experience. We have built over 3,500 pre-stressed concrete liquid storage tanks over the past 90 years around the country and world, as a result we have become the leader in the industry when it comes to quality and innovation. As a Construction Project Manager at DN Tanks, you will have complete ownership of project execution and responsibility for the successful execution of our projects, by ensuring adherence to plans and specifications while meeting schedule deadlines and budget. You will be a leader within the organization, responsible for leading project teams, enforcing policies, implementing controls, and maintaining relationships to achieve successful project outcomes. This is a great opportunity for a construction/engineering professional looking to build a career with a fast-growing organization!Primary Responsibilities • Develop and maintain project schedules, establish milestones for each phase, conduct regular progress reviews, and make necessary adjustments for on-time delivery., • Identify and deploy strategies to proactively mitigate potential schedule delays and maintain project progress., • Provide detailed communication to stakeholders and deliver timely project updates and reports., • Collaborate seamlessly with subcontractors for timely task execution, oversee progress, address issues promptly, and ensure project efficiency., • Understand project costs pertaining to: labor, equipment, and materials forecast expenses, while skillfully handling budget and cash management., • Guide the project team to meet KPIs, covering safety, quality, schedule, productivity, and financial aspects., • Own and manage adherence to the quality control and safety programs., • Evaluate superintendent's performance in leadership, project management, and team coordination while offering constructive feedback for professional development., • Assign and review work for Project Engineers and Assistant Project Managers, demonstrating leadership and mentorship to foster their technical progress and growth.Qualifications, • Bachelor’s degree or equivalent in a relevant field. Construction Management or Engineering preferred, • 5+ years of experience in a heavy civil self-performing contractor, concrete preferred, • Strong communication skills to facilitate team collaboration and client engagement., • Advanced problem-solving capabilities to tackle intricate challenges., • Expertise in conflict resolution for adeptly managing disputes and upholding project unity.Compensation and Benefits, • Competitive Compensation, • Annual Incentive Program, • 401k with Employer Matching Contribution, • Paid Time Off + Paid Holidays, • Medical/Dental/Vision Insurance, • Flexible Spending Account (FSA), • Employee Assistance Program (EAP), • Disability Insurance, • Life Insurance, • Tuition Reimbursement

Job Description ABOUT CONDON-JOHNSON & ASSOCIATES: Our experience in geotechnical design and construction spans more than four decades. Over that period of time we have grown from a small shoring and foundation company to the leader in geotechnical construction on the West Coast. We are underpinned by our core values of being a dependable, reliable, and honest family owned Construction Company. PROJECT MANAGER: In this position, you will estimate and manage drilling, ground improvement, anchored earth retention, and grouting projects. Responsibilities include estimating projects, managing design-build shoring projects, developing budgets, cost control, scheduling, quality control, and client relations. Requirements: • Assertive, Competitive, and Tenacious, • BS Degree in Civil Engineering or Construction Management, • Experience in deep foundations, earth retention, and ground improvement., • Critical Thinking Skills, • Goal and Schedule Driven, • Ability to Adapt to Changing Environments, • 2 to 3 years of Field Experience, • 5 to 8 years of Increasing Project Management Experience Employment Benefits: • 401K Program & Profit Sharing, • Comprehensive Health Benefits Powered by JazzHR 8ISbkTjL5q

Job Description Project Manager - Heavy Civil Construction (San Diego Region) Location: San Diego, CA Salary Range: $120,000 - $170,000 (DOE) Type: Full-Time Position Overview We're seeking an experienced and results-driven Project Manager to join our Southern California - San Diego team. This role oversees the full administrative, financial, and operational management of assigned heavy civil construction projects, ensuring completion on time, within budget, and to the highest safety and quality standards. The ideal candidate has a proven track record in earthwork, underground utilities, structures, paving, and public works projects, and thrives in a fast-paced, collaborative environment. With over a century of construction excellence behind us, our culture emphasizes communication, accountability, and long-term career growth. Key Responsibilities Project Leadership & Execution • Lead and manage project teams in coordination with Division Managers, Superintendents, and Estimators., • Establish and track project goals, budgets, and schedules., • Ensure all projects are executed safely, efficiently, and in full compliance with contract requirements., • Represent the company in client meetings, progress reviews, and negotiations., • Oversee field operations to ensure productivity, quality, and safety performance. Financial & Contract Management • Manage project financials including forecasting, billing, cost control, and cash flow., • Oversee change orders, subcontractor payments, and project cost reports., • Review contracts and specifications to identify risks and protect company interests., • Monitor earned value, productivity reports, and cost-to-complete forecasting to maintain profitability. Coordination & Communication • Serve as the primary point of contact for owners, subcontractors, and vendors., • Coordinate project documentation including RFIs, submittals, meeting minutes, and progress reports., • Communicate proactively across departments to resolve issues and maintain schedule alignment., • Collaborate with estimating, procurement, and field operations for resource optimization. Safety, Risk & Quality • Champion a zero-incident safety culture on all job sites., • Ensure compliance with OSHA regulations and company safety policies., • Conduct risk assessments and implement proactive mitigation strategies., • Maintain quality control through inspections, testing, and adherence to specifications. Project Closeout • Lead project closeout activities, ensuring accurate documentation, punch list completion, and client satisfaction., • Oversee delivery of as-builts, warranties, and final reports., • Conduct project reviews to identify best practices and areas for improvement. Qualifications • Bachelor's degree in Construction Management, Civil Engineering, or related field (preferred)., • Proven experience managing heavy civil infrastructure projects (earthwork, underground utilities, structures, paving, public works)., • Strong understanding of public contract codes, cost control, and change management., • Proficient in Bid2Win, Primavera P6, MS Project, and construction management software (e.g., Procore)., • Excellent leadership, communication, and negotiation skills., • Financially astute with the ability to analyze budgets,

Job Description Hazen and Sawyer is seeking a Senior Conveyance Project Engineer/Manager for our San Diego office. As part of our design and process teams, you will be working on the planning and design of new or rehabilitation of water, wastewater, and storm water pipelines. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Serving as Project Manager, Design Manager or Project Engineer with full technical responsibility for planning, coordination, and execution of tasks for small or larger projects, • Preparation of contract specifications and drawings, • Planning, design and construction of new pipelines (pressure and gravity) ranging in diameters and material type including condition assessment and prioritization and rehabilitation of existing pipelines, • Hydraulic modeling including interpretation of modeling results to inform design of new pipelines or rehabilitation of existing pipelines, • Pipe design calculations to determine pipe size, pressure class, external loads including trench design, pipe joint selection, etc., • Technical expertise in the layout and profiles of pipeline design in AutoCAD Civil 3D, • Utility investigations and coordination to determine and resolve potential vertical and horizontal utility conflicts, • Knowledge of subsurface and geotechnical engineering requirements, • Field surveying project requirements, • Development and review of technical reports, proposals, contract documents, resources studies, and data analysis, • Office and field engineering support during construction, • Bachelor's degree in civil/environmental engineering, • PE license, • 12+ years of experience in the planning and design of new or rehabilitation of water, wastewater, and storm water pipelines, • Experience in successfully delivering projects spanning multiple years in collaborative, multi-disciplinary teams, • Proficient in all MS Office based computer software, • Excellent communication and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies, • Self-starter with attention to detail, • Advanced degree (Master’s or Doctorate) in Civil/Environmental Engineering, • NASSCO certification, • Site/civil design for conveyance systems, • Exposure to field investigations, pipeline construction and associated street reconstruction, • Proficiency in the use of Revit/BIM, hydrologic/hydraulic modeling software such as InfoWorks and SWMM-based software, • Soil erosion and sediment control design including stability calculations, Best Management, • Practices, swale design, spillway design, and determination of construction sequence., • Permitting of soil and erosion control, storm water, site plans, and drainage studies, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location.

Job Description Project Manager II (Engineering) PM2CM, Inc., (Project Management to Construction Management) is a professional services company dedicated to providing Program and Project Management, Construction Management and Project Controls services during the design and construction phase of projects. Our core expertise is in Project Controls which includes Scheduling, Cost Controls, Document Management and Controls, Budget tracking and monitoring, Estimating, Risk Analysis, Claims avoidance and Mitigation, Change Management and Earned Value Management. The position is in Pomona, CA. Hybrid-Remote (Tuesday and Wednesday in the office/field) Become a Project Manager at one of the largest utility companies in Southern California managing electric infrastructure projects. In this job, you’ll be part of the Construction & Technical Support (C&TS) organization and will directly collaborate with the company's customers and internal groups. This organization provides project and program management for Transmission and Distribution. The volume of transmission projects is projected to continue to grow over the next several years. These projects are growing in number, size, complexity, and strategic impact. Due to the high visibility of these projects by regulators, public and environmental agencies, and major customers, they must be managed consistently and carefully. The primary purpose of the Project Manager role is to improve the success rate of projects by applying project management principals, methods, tools, and standards. Individuals are typically certified as Professional Project Managers and apply their knowledge and experience in a variety of functions and projects across the organization. As a Project Manager, your work will help power our planet, reduce carbon emissions, and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future? A day in the life - Get ready to think big, work smart and shine bright! • Manages projects and programs within the organization: Projects and programs may include relocation of existing facilities, and small civil capital projects., • Responsible for project cost management related to budgeting, forecasting, and trends., • Manages 5-10 active projects and coordinate contractors and material., • Coordinate activities, resources, equipment, and information necessary for project completion, maintaining project plans, reports, and technical documents, and serving as a point of contact for the project team ensuring effective communication and team coordination., • Lead planning, monitoring, and management of internal projects including complex, multi-year initiatives within and across OUs such as Finance, Regulatory, HR, Engineering, Transmission & Distribution, Legal, Customer Support, and Administrative Services as well as construction projects, infrastructure investment, and new facilities from initiation through completion., • Updates project documentation data in files and multiple software systems. Requests, receives, evaluates, and prioritizes data into hard files, Microsoft software programs, etc., • Initiates and issues documentation including Authorization to Proceed (ATP), Release to Construct (RTC), letters, agreements, contracts, trends, work order requests, etc. as the need arises., • Lead development of project, resource, and staffing plans, secure required resources, track, and report on progress, troubleshoot issues and ensure project results meet requirements regarding technical quality, reliability, schedule, cost, and regulatory requirements., • Monitor performance and recommend schedule changes, cost adjustments or resource additions including determining how changes will impact status, budget, and timeline., • Evaluates submittals, letters, plans project / program files for completeness with associated processes and procedures., • Upon completion of projects follow associated processes and procedures associated with closeout and reconciliation., • Schedules and leads internal and external meetings with associated agendas, meeting minutes, action items. The essentials: • Bachelor’s Degree in Engineering required., • Seven years of Project Management experience including ownership of scope, cost, and schedule., • Ability to lead multiple sophisticated projects in a fast-paced environment with minimum supervision and tight time constraints. The preferred: • Experience with transmission, distribution, and/or substation line construction, maintenance, or operations regulations., • Utility Industry experience preferred., • Experience working as a resident engineer to oversee drawings that need to be issued., • Experience communicating and collaborating effectively with external clients, various organizations across SCE, and all levels of management to lead and drive projects., • Experience working with all Microsoft office programs, SAP, Design Manager (DM), Google Earth Pro, and Adobe Acrobat Pro.

Job DescriptionSalary: $95,000.00 - $120,000.00 About Us: Anaergia (TSX: ANRG) is a global leader in offering sustainable solutions to produce clean energy and the conversion of waste streams to resources. Through a proven portfolio of proprietary technological solutions, Anaergia maximizes the generation of renewable energy, diversion of waste from landfills, and reduction of greenhouse gases for customers across the municipal, industrial, commercial, and agricultural sectors. Headquartered in Burlington, ON, and operating through multiple subsidiaries across North America, Europe, Africa, and Asia, Anaergia is trusted by more than 1,600 installations globally. Mission: Consistently coordinate the assigned engineering activities to complete the projects design in compliance with the project schedule and with the budget, observing the correctness and completeness of the provided information. Job Overview: Be Anaergias primary point of contact on site with the customer, subcontractors, and Anaergia personnel. Consistently manage the assigned jobs by managing all the Site Activity from the site establishment until the handover to the commissioning team, meeting, and possibly improving timing and costing. This role will be site-based in the US, with the primary location in Carlsbad, CA. Job Responsibilities: Goals The REs goals can be summarized as follows: Understand the scope of the work, the contract requirements, and the limit of supply; Coordinate all the Engineering activities to complete the design of the project; Meet/improve the project schedule; Meet/improve the project budget intended for all engineering activities; Meet/improve the quality standards; Identify and submit possible cost-effective improvements in the design; Quickness and flexibility in responses to urgent questions from PMs and from the sales department; Engineering team leader at the project level for both internal and/or external resources. Become a technical expert in one or more areas of Anaergias technical offering. Tasks, Authority, and Liability The Resident Engineer is expected to perform all tasks below without guidance or supervision. The Resident Engineer will be the technical lead for a project and may be used to review other projects documents, performed by the project engineers I and II. Additionally, they may also have other managerial responsibilities within the company. • Arrange the general document list, agreeing with the PM and in compliance with the contract and the availability of external/internal resources., • Plan the engineering activities for all assigned projects and monitor the activities' progress in compliance with the schedule defined in the general document list;, • Agree with the PM to define the budget assigned for the Project Engineering activities throughout the entire life of the project;, • Regularly update the PM on the status of the design and the remaining budget to identify possible risks in advance and plan solutions accordingly;, • Provide to PMs the technical specifications and tender documents for the acquisition of the materials expected for each project in accordance with the terms of supply and properly calculated according to the design data., • Provide technical support to the client as needed under the guidance of the PM;, • Provide technical review of all third-party design consultants;, • Provide technical review of equipment proposals and submittals;, • Check all the licensing documents and incorporate permit conditions;, • Coordinates regular design review meetings with the project team., • Create a risk assessment for each project to identify risks and their mitigation. Make sure to comply with the local standards required for each specific project., • Organize regular meetings (weekly) to share and update the progress for the engineering activities for all jobs, and point out any problems that have emerged during the engineering development., • Support of the site manager and subcontractors/vendors regarding specific technical questions on the project design;, • Organize regular meetings (bi-weekly) with the appropriate person responsible for each topic to submit improvements of technical aspects and build solutions. Involve the Project Engineering Leader (PEL) when necessary., • Update the Manager, Project Engineering, about the status of the project, status of the budget, and any identified issues that require actions from upper-level management; RE is authorized to: • Have T&L costs in compliance with the functions budget set by the PM Safety and Quality-related responsibilities The Resident Engineer is responsible for the rigorous application of the company rules and standards about the engineering activities, for the accuracy of the information provided, and for the compliance with the contract requirements and specifications of each project. Safety compliance is priority one for Anaergia. Throughout the design activity, the Resident Engineer shall assess all aspects related to health risks and safety across all phases of the project (design, construction, operation, maintenance, and dismantling) and take actions to eliminate or mitigate risks and advise all involved parties on the remaining risks. Competencies/Qualifications: Education- Holds a technical diploma or graduation in Civil Engineering / Mechanical Engineering/ Chemical Engineering, or equivalent. Other advanced degrees may offset experience requirements. Experience- At least 10 years of progressively complex Project Engineering in the Industrial Plant business. Travel Requirements- Travel up to 20% may be required. Technical/ Special competences- The RE has the following technical skillsets: • Understanding of contract specification and identification of supply limits for the design activity of complex mechanical plants;, • Basis of Mechanical/Hydraulic design, Electrical Design, and Control systems;, • Knowledge about national and international regulations for the design of waste treatment, renewable energies, and biogas plants;, • Experience managing relationships with all parties involved in the project design;, • Fluent in English. Cross-functional competences- To execute the job with the right sense of priority, the RE shall understand how their activity affects other functions, as well as how other functions can positively or negatively influence the achievement of the RE goals. Competencies include: • Basic knowledge of project management and how the adopted solutions affect the project budget and schedule;, • Good understanding of sales strategies, how they influence the engineering process, and how the engineering process may affect sales;, • Biogas specific competences;, • Waste Treatment specific competences;, • Waste Water Treatment Plant specific competences Hierarchy- • The Resident Engineer reports to the Manager, Project Engineering (Manager/PE) or Regional Director, Engineering regarding the companys organization chart and reports operationally to the Project Managers (PM) regarding the projects organization chart. The PM is the highest authority at the project level for project schedule, cost control, and customer relationships, and is responsible for all involved functions. For additional information on Anaergia, please visit . As an Equal Opportunity Employer, Anaergia provides equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Anaergia will provide reasonable accommodations for qualified individuals with disabilities.

Job Description Hazen and Sawyer is seeking a Senior Wastewater Project Engineer/Manager for our San Diego office. As part of our design and process teams, you will be involved with a wide range of wastewater infrastructure projects. This will encompass all phases of design, including conceptual/feasibility evaluations, project management, preparation of design reports, permitting, development of construction drawings and specifications, and support of construction services. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Developing technical treatment strategies, selecting treatment processes, developing process design criteria, and delivering projects., • Direct coordination and collaboration with clients., • Coordination with internal technical specialists in all practice areas and discipline design professionals for project delivery., • Evaluate progress of the project staff and results obtained and recommend changes to achieve overall project objective, • Planning, design, permitting, and construction of wastewater-related projects., • Experience managing interdisciplinary teams to effectively meet the client’s needs, • Task responsibilities will include project management, preparation of assessment and design reports, performing design calculations, equipment sizing/selection, preparation of construction documents, and support needs for construction management/commissioning., • Fieldwork and site visits from planning through construction may be required with occasional travel., • Candidate shall also be able to lead business development activities including preparation of proposals and presentations., • The position will lead to an increasing level of client development and management commensurate with experience, supported by our local office and firm-wide technical resources, • Bachelor's degree in civil/environmental engineering, • PE license, • 12+ years of experience in the field of wastewater-related infrastructure, including project management (planning, design, and construction), • Experience in successfully delivering projects spanning multiple years in collaborative, multi-disciplinary teams, • Proficient in all MS Office based computer software, • Excellent communication and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies, • Self-starter with attention to detail, • Strong organizational skills, • Advanced degree (Master’s or Doctorate) in Civil/Environmental Engineering, • Experience managing projects with fees of $2M or more, • Experience negotiating multiple contracts with clients, • Experience recruiting staff, • Engagement in professional society leadership roles, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Project Manager – Telecommunications & Utility Construction Salary: $110,000– $125,000 per year + Benefits We are seeking an experienced Project Manager to lead pre-construction and construction activities for large-scale telecom and utility infrastructure projects. This role requires a strong background in safety, scheduling, subcontractor coordination, and quality control, with the ability to deliver projects on time and within budget. Responsibilities: * Plan, organize, and supervise all phases of assigned construction projects. * Schedule major construction tasks and manage subcontractor services, including payment approvals. * Coordinate activities of field superintendents, craft labor, and subcontractors to maintain project continuity. * Serve as the primary point of contact for clients, subcontractors, permitting authorities, and utility providers. * Ensure strict adherence to job safety, quality standards, schedules, and regulatory requirements. * Conduct site visits, attend pre-bid meetings, and review all construction documents and specifications. * Perform accurate material take-offs, obtain vendor/subcontractor quotes, and prepare labor/material estimates. * Develop budgets, track costs, and manage project schedules. * Oversee inventory, material management, and loss control. * Manage change orders, verify work completion percentages, and coordinate billing. Requirements: * Minimum 18 years of age and authorized to work in the U.S. * Demonstrated experience in telecom/data infrastructure development, permitting, and utility coordination. * Strong knowledge of civil construction practices, quality assurance, and OSHA safety compliance. * Valid driver’s license and willingness to travel to project sites as needed. * Proficient in Microsoft Office; knowledge of project management software is a plus. * Excellent communication and leadership skills; bilingual in Spanish is a plus. * Ability to read, analyze, and prepare business correspondence and proposals. * Strong organizational skills with the ability to manage multiple tasks simultaneously. Preferred Qualifications: * Experience in telecom/data infrastructure development domestically or abroad. * Extensive knowledge of approved practices, procedures, tools, and materials used in telecom line construction. Benefits Include: * Weekly paychecks * Paid time off, holidays, and parental leave * Comprehensive health, dental, vision, life, and disability insurance * 401(k) with company match * Stock purchase plan * Education reimbursement * Legal insurance If you are a safety-focused leader with a proven track record in telecom or utility construction project management, we’d love to hear from you.

About Us Utility Systems Science & Software is a leader in environmental engineering solutions dedicated to protecting public health and water resources. We specialize in designing, implementing, and optimizing advanced wastewater monitoring, among other systems for municipal and industrial clients. Join our team of experts in building resilient and sustainable water infrastructure. The Role: Engineer. Manager. Innovator. We are seeking a licensed Professional Engineer (PE) with deep wastewater expertise and a track record of successful project management. You will be the technical and managerial lead for projects centered on wastewater monitoring, SCADA systems, instrumentation, and process control. You won't just design systems—you’ll manage the entire project lifecycle to ensure our clients gain actionable data for regulatory compliance, process optimization, and asset protection. This is a critical role for a technical leader who thrives on client interaction and complex problem-solving. Key Responsibilities Project Leadership: Manage the full scope, schedule, budget, and quality of wastewater monitoring projects from conception (RFP) through design, procurement, installation, and commissioning. Technical Design: Lead the design and specification of wastewater monitoring networks, including flow monitoring, permanent and portable SAMPLERS, level sensors, water quality parameter sensors (DO, pH, NH3-N, etc.), and SCADA integration. Client & Regulatory Interface: Serve as the primary technical contact for clients and regulatory agencies (e.g., EPA, State DEP). Prepare and review regulatory reports (DMRs, CMOM, SSO reports) based on monitoring data. Construction & Implementation Oversight: Review contractor submittals, conduct field inspections, oversee sensor installation and calibration, and lead system startup and performance testing (SAT). Data Analysis & Reporting: Translate monitoring data into clear insights and recommendations for clients regarding infiltration/inflow (I/I), treatment process control, and capacity management. Team Development: Mentor junior engineers and coordinate with designers, field technicians, and data analysts. Who You Are (Qualifications) You Must Have: Bachelor’s degree in Civil, Environmental, or Electrical Engineering. Active Professional Engineer (P.E.) license. Minimum 7+ years of civil/environmental engineering experience with a strong focus on wastewater systems. Minimum 5 years of direct project management experience, including budgeting, scheduling, and client management. Proven hands-on experience with wastewater collection system monitoring, instrumentation, and hydraulic modeling (e.g., SewerCAD, InfoWorks ICM). Exceptional communication skills for technical and non-technical audiences. What Will Make You Stand Out: Project Management Professional (PMP) certification. Direct experience designing/specifying equipment from manufacturers like Hach, YSI, Xylem, ISCO, Teledyne ISCO, or similar. Expertise in CMOM programs, SSO investigations, or wastewater metering projects. Strong data analysis skills Experience with pilot studies, condition assessment technologies (e.g., CCTV, LiDAR), and grant-funded projects. Why Join Us? Impactful Work: Your projects directly contribute to cleaner waterways and more efficient, compliant municipal systems. Technical Growth: Be at the forefront of sensor technology, data analytics, and smart water infrastructure. Career Path: Clear trajectory to Senior Project Manager, Department Lead, or Technical Director.

Job DescriptionAs Accenture continues to grow, we have an increasing number of career opportunities available to you. Depending on the job and location, you may be directed to apply with Accenture Infrastructure & Capital Projects LLP or one of the following Legal entities: • You’ll perform daily field inspections of civil and utility construction, including grading, paving, concrete, storm drains, water, sewer, and traffic improvements., • You’ll document contractor progress, verify quantities, and monitor compliance with approved plans, specifications, and codes., • You’ll prepare detailed daily inspection reports and maintain accurate project records., • You’ll coordinate with contractors, engineers, testing labs, and agency representatives to ensure smooth project execution., • You’ll ensure construction activities are performed in accordance with safety standards and environmental regulations., • You’ll participate in pre-construction meetings and punch list/walkthrough inspections., • You’ll assist with change order verification and pay application reviews as needed., • Onsite at client site: The work location for this role is onsite with our clients and partners to enable delivery and cultivate our client relationships.HERE’S WHAT YOU’LL NEED:, • Minimum seven (7) years of inspection experience on public works projects, • Minimum three (3) years experience with Caltrans, cities, counties, or special districts in Southern California, • Valid California driver’s license and clean driving recordBONUS POINTS IF YOU HAVE:, • Certifications such as ACI, ICC, QSP/QSD, AWS, or NICET, • Knowledge of prevailing wage and labor compliance requirements, • Experience working on federally funded projects or DBE compliance, • Familiarity with inspection software such as Fieldwire, Procore, or client PMIS systems, • Bilingual (English/Spanish) preferred but not required

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview As an intern on our Aviation team, you will be an integral part of Airport and Airfield design and construction projects and support key members of our team. Our internship program provides all interns an opportunity to meet with leadership and work with mentors on both professional and technical development. We also have a lot of fun – between company events, intern socials, and team bonding, our interns become a part of our ONE C&S mentality. Position Responsibilities: • Creating exhibits/working on plans in AutoCAD, • Creating real life quantity takeoffs and cost estimates for projects, • Reviewing project specifications and understanding FAA rules and regulations for airport projects, • Learning about funding sources for airport projects, • Airport site visits/possible construction inspection (with supervision), • Pursuing a Bachelor’s degree in Civil Engineering, or another related field. Completion of sophomore year preferred., • Knowledge of AutoCAD or other 3D modeling systems, • Strong analytical, conceptual, and problem-solving skills *Actual compensation may vary based on prior internship experience, current academic year, degree program, certifications, and geographical location. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Hazen and Sawyer is seeking a CAD/BIM Designer to work alongside project managers and engineers to produce structural BIM (Revit) models, families, and contract drawings for the structural discipline. The ideal candidate will be proficient in the use of Autodesk Revit with experience in the creation of models, families and contract drawings. The candidate will have experience leading the model and contract drawing development effort for projects, including performing interdisciplinary clash detection and the reconciliation of conflicts as well as ensuring that standards are adhered to. AutoCAD/Civil 3D proficiency would be of benefit. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • Developing Revit models, families, and contract documents, • Coordinating contract drawing development with multiple disciplines, • Performing BIM model clash detection and working with various disciplines to resolve conflicts, • Training/mentoring less experienced designers, • Reviewing models and drawings for less experienced designers, • Relevant bachelor’s degree and 6 to 10 years of experience — or an associate degree/technical certification and 6 to 10 years of experience., • Proficiency in Autodesk Revit, • Proficiency in AutoCAD/Civil 3D would be a benefit, • Experience leading and coordinating drawing production for medium and large sized projects. What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Primary Function Under general supervision, performs assignments of limited scope which require the application of standard techniques, procedures, and criteria in carrying out a sequence of related tasks. This includes limited experience in utilizing various computer software packages and automated engineering and design tools. Primary Duties • Assists with preparing plan details and outlines, • Assists with material quantity take-off, contact vendors to obtain budgetary quotes in developing construction cost for projects, • Assists in preparation of technical specifications, • Reviews design drawings within defined limits, • Assists with preparing technical memorandum or sections, • Performs field tests & measurements, collects field data and processes data, • Currently pursuing a Bachelor’s Degree in Civil and Environmental Engineering, • Minimal years of experience, • Strong organizational skills, attention to detail and work ethic, • Excellent communication skills, both written and verbal, • Team-oriented and self-motivated with the ability to work with a team of professionals and independently While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-ES1

Job Description: UNICO Engineering provides high quality Construction Management, Land Surveying, and Systems Integration services to public and private clients. With a spirit of cooperation and partnership, UNICO focuses on responsiveness, delivering value, and meeting and exceeding our clients’ expectations. UNICO is a fast-growing consulting firm with significant opportunities for upward mobility. UNICO supports professional development and continuing education. Fun, flexible work environment and competitive compensation and benefits. Please send your resume with detailed experience. Include job references for past employment and experience. UNICO is seeking an Area Lead - Senior Resident Engineer with experience leading local, state and federally funded transportation contracts for projects located in Southern California, specifically, in the San Diego area. Must have 10+ years relevant industry experience, and be familiar with transportation, transit, or operational facilities projects. Type of infrastructure projects include civil improvements, structural facilities, electrical and mechanical systems, underground utilities, earthwork, TOD, etc. Strong verbal and written communication skills are required. The Area Lead - Resident Engineer will be responsible for successful completion of construction projects. Specific responsibilities include being an owner’s representative, attending and running client and contractor meetings, reviewing plans and specifications and ensuring compliance with documents, providing project documentation in the form of letters, RFI/Submittal responses, change orders, etc., overseeing field inspection, supervising project inspection teams, and providing technical guidance and quality assurance, maintaining project controls including cost and schedule management. Must have experience working in a team environment, and have the ability to direct and supervise field construction activities and staff, office engineering, inspection, materials testing, field contract administration, and to act as liaison with clients/owners, consultants, contractors, design professionals, public involvement and regulatory agencies. Qualifications: • Must have experience with proposal preparation and client management, • Must have the ability to direct and manage staff, • BS in Construction Management, Civil, or Structural Engineering, • Registered Professional Engineer in California, • 10+ years of industry experience, 5 years managing construction projects or working as a resident engineer for a public agency, • Aptitude and passion to help win work, • Possess a valid driver's license and clear DMV record, • Must pass pre-employment drug screening Competitive Salary and generous benefits including health, vision, dental, life, disability, 401K, PTO and paid holidays. Energizing, fast paced, nimble and expanding company with plenty of career growth opportunity. As an Equal Employment Opportunity Employer, UNICO Engineering considers applicants for all positions without regard to race (including natural hairstyles), color, religion (including religious dress and grooming practices), national origin, age (40 and over), medical condition, physical or mental disability, marital status, sex (including sexual harassment, sex stereotypes, pregnancy, childbirth and related medical conditions), sexual orientation, ancestry, genetic information/characteristics, gender, gender identity, gender expression, transgender, military or veteran status, reproductive health decision-making, or any other characteristic or activity protected by law.

LOOKING FOR THAT NEW OPPORTUNITY IN SAN DIEGO? We are actively seeking an experienced Heavy Civil Construction Chief Estimator to join the team. We are one of San Diego's best and most respected heavy civil construction firms. We self-perform heavy highway, public works, and site development projects. We specialize in earthwork, bridges, retaining walls, and paving. Your role would be with a dynamic firm that has progressive leadership and a culture that consistently ranks as one of the region’s top contractors and offers fantastic employee appreciation and excellent opportunities for career growth. Must have experience in two or more of the following Heavy Civil Construction areas: excavation, paving, bridges, or concrete structures. Employee Compensation & Benefits: • Base Salary $240k-$280k, DOE, • Medical/Dental/Vision Benefits, • 401k with company match, • Paid vacation, sick time, and holidays, • Annual bonus program Required Experience/Skills/Qualifications: 5+ years of estimating experience in CalTrans projects. Hard bid and alternative delivery experience preferred. • Microsoft Office Suite, • Experience with HCSS or other software preferred, • Bachelor's degree in Civil Engineering, Construction Management, or equivalent experience, • Negotiated project experience preferred, including technical writing skills All searches are held in the utmost discretion. Confidentiality is exercised to the fullest, both to our candidates and clients. There are no fees to our candidates. G. Peterson Consulting Group, Inc. is a leading Executive Recruiting Firm for the Construction Industry. Our Experienced Recruiters are dedicated to identifying, qualifying, and delivering top talent nationwide. Let us help enhance your career. Services uphold the highest standards of professionalism, honesty and integrity. We are an Equal Opportunity Employer.

Job Title and Summary Job Title: Concrete Estimator Department: Preconstruction / Estimating Reports To: Estimating Manager or Preconstruction Manager Job Summary: The Concrete Estimator is responsible for preparing accurate cost estimates for concrete work on commercial, industrial, and/or residential construction projects. This role includes reviewing plans and specifications, performing detailed quantity takeoffs, obtaining and analyzing vendor/subcontractor pricing, and assembling complete, competitive bids in alignment with company goals and client requirements. Key Responsibilities • Review architectural, structural, and civil drawings, specifications, and addenda to understand the full scope of concrete work., • Perform detailed quantity takeoffs for concrete, rebar, formwork, embedded items, and related materials using digital takeoff/estimating software., • Develop comprehensive material, labor, equipment, and subcontractor cost estimates for all phases of concrete work., • Prepare bid proposals, alternates, and value‐engineering options in coordination with project managers and field operations., • Solicit, review, and level vendor and subcontractor quotes to ensure scope coverage and cost competitiveness., • Identify risks, clarifications, and exclusions, and clearly document them in estimate and proposal deliverables., • Assist in project handoff meetings, explaining takeoffs, assumptions, and cost breakdowns to project management and field teams., • Track historical costs and maintain databases for production rates, crew compositions, and unit prices to improve future estimates., • Participate in pre-bid meetings, site walks, and RFI processes to clarify scope and site conditions., • High school diploma required; associate or bachelor’s degree in Construction Management, Civil Engineering, or related field preferred., • 3–5+ years of experience in concrete estimating, structural concrete, or general construction estimating (adjust years for junior/senior roles)., • Strong understanding of concrete construction means and methods, including forming systems, reinforcing, placement, and finishing., • Proficiency with estimating and takeoff software (e.g., Bluebeam, Planswift/On-Screen Takeoff, HeavyBid, or similar) and Microsoft Excel., • Ability to read and interpret construction drawings, specifications, and geotechnical reports., • Strong numerical and analytical skills with high attention to detail and accuracy., • Ability to manage multiple estimates and meet tight bid deadlines., • Effective written and verbal communication skills for coordination with internal teams, clients, vendors, and subcontractors., • Strong organizational and time-management abilities., • Problem-solving mindset with the ability to identify cost-saving and value-engineering opportunities., • Primarily office-based with occasional site visits for pre-bid walks and field coordination., • Full-time, exempt (salary) position., • Typical schedule: Monday–Friday, with additional hours as needed to meet bid deadlines., • Compensation: Competitive salary plus benefits (health, retirement plan, PTO, etc.) as defined by company policy.

Job Description Pay: $150,000.00 - $225,000.00 per year Why This Is a Great Opportunity • 100% remote, build your construction defect practice without being tied to an office, • Real litigation work, motion practice, discovery, depositions, experts, mediation support, • Mix of construction defect defense plus rideshare and PI defense matters (as needed), • Clear comp bands tied to experience, room to grow with the practice, • Location:, • Must be actively licensed and in good standing with the California Bar Our client is a California civil litigation defense firm with deep experience in construction defect matters and complex liability work, known for practical strategy and strong client service. Job Description • Defend construction defect matters for developers, builders, subcontractors, and related parties, • Handle rideshare defense and related personal injury defense matters as needed, • Draft and argue motions, including dispositive motions when appropriate, • Manage written discovery, meet and confer strategy, and case deadlines, • Take and defend depositions, prep witnesses, and support trial preparation when needed, • Coordinate with experts and manage expert discovery, • Active California Bar license (required), • 1+ years of civil litigation experience (insurance defense preferred), • Construction defect defense experience (required), • Bonus: rideshare defense experience, PI defense experience, general liability defense background, • Remote first culture with meaningful ownership of your work, • High impact matters and real responsibility, not just research support Job Type: Full-time Benefits: • Dental insurance, • Life insurance, • Paid time off, • Retirement plan, • Vision insurance

Job Description Description; • Prepare engineering analyses, designs, and calculations for private improvement projects., • Assist in creating construction plans and cost estimates., • Support construction submittal reviews, RFIs, and other construction-related tasks., • Coordinate with design teams and public agencies., • Conduct technical analyses and simulations to assess the feasibility and effectiveness of engineering solutions., • Bachelor's degree in Civil Engineering (required)., • At least 3 years of relevant experience., • Professional Engineer (PE) license (required)., • Strong knowledge of civil engineering principles, methods, and practices., • Proficient in AutoCAD (Civil 3D) and Microsoft Office Suite., • Ability to analyze and organize engineering data to produce thorough reports., • Proven ability to manage multiple engineering tasks, collaborate effectively in teams, and maintain excellent interpersonal skills.