Concrete testing jobs in Rochester, New YorkCreate job alerts

Job DescriptionDescription: General Job Summary: • Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred., • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification., • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding., • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements., • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Is authorized to interrupt any welding process found out of compliance with established WPS., • Will immediately inform the area supervisor of the non-conformance and production interruption., • Production will resume after the Welding Coordinator approves the corrected process., • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organization’s safety, quality, operational performance, customer satisfaction, and overall financial health of the company. Supervisory Responsibilities: None Requirements: Education Associate’s degree (A.A.) Bachelor’s degree (B.A.) preferred or equivalent combination of education and experience. Experience 3-5 years metal fabrication experience Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, Internet Explorer, Design software, and CAD software including: solidworks, Autocad, ProE and others. Other Requirements: • Good communication skills with the ability to develop reports and verbally communicate with different, • levels inside and outside the organization., • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point. High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand, walk, sit, maneuver through the office and factory, talk or hear, and lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the noise level in the work environment is usually moderate.

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Welding Engineer to join our team. We are looking for individuals that will be responsible for developing welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Key Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred. • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification. • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding. • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements. • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organizations safety, quality, operational performance, customer satisfaction, and overall financial health of the company.Qualifications:, • Experience in welding process development, • Experience in use of robotics. Computer Skills: To perform this job successfully, an individual should have knowledge and proficiency in the use of Microsoft Word, Microsoft Excel, Outlook, and Solidworks. Experience with robotic programming. * Other Requirements: To perform this job successfully, an individual must have the ability to read blueprints, knowledge of business practices/protocols, and be able to maintain confidential information. * Good communication skills with the ability to develop reports and verbally communicate with different levels inside and outside the organization. * • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point., • Experience with MRP software, PLEX preferred. Language Skills: High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. * Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. * Reasoning Ability: High Skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. * Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to walk, sit, use of computer keyboard, maneuver through the office and factory, use a 10-key calculator, and communicate with customer and management in person, by email or via telephone, and the Associate is occasionally required to lift and/or move up to 50 pounds. * PPE: Must wear safety glasses with side shields and steel toe/composite shoes while on the production floor. Gloves may be required if handling parts. * Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. Hours: • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Line of Business: Other About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing * Safely operate a ready mix truck to deliver concrete products to customers. * Perform pre-trip and post-trip inspections of the vehicle. * Communicate effectively with dispatch and customers to ensure timely deliveries. * Maintain accurate delivery records and logs. * Adhere to all safety and environmental regulations. What Are We Looking For * Valid commercial driver’s license (CDL) with a clean driving record. * Strong driving skills with a focus on safety. * Ability to work independently and manage time effectively. * Good communication and customer service skills. * Physical capability to handle the demands of the job. * Flexibility to work in various weather conditions. Conditions of Employment * Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. * Some positions require FMCSA regulated ongoing drug and alcohol testing. Work Environment * Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. What We Offer * $29.42 - $31.42 per hour. * Benefits through the Union for Medical, Dental, Vision and Pension. * Union paid vacation, sick leave and holidays. Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: Other About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing * Safely operate a ready mix truck to deliver concrete products to customers. * Perform pre-trip and post-trip inspections of the vehicle. * Communicate effectively with dispatch and customers to ensure timely deliveries. * Maintain accurate delivery records and logs. * Adhere to all safety and environmental regulations. What Are We Looking For * Valid commercial driver’s license (CDL) with a clean driving record. * Strong driving skills with a focus on safety. * Ability to work independently and manage time effectively. * Good communication and customer service skills. * Physical capability to handle the demands of the job. * Flexibility to work in various weather conditions. Conditions of Employment * Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. * Some positions require FMCSA regulated ongoing drug and alcohol testing. Work Environment * Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. What We Offer * $29.42 - $31.42 per hour. * Benefits through the Union for Medical, Dental, Vision and Pension. * Union paid vacation, sick leave and holidays. Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Use experience and skills to troubleshoot, repair, adjust and maintain manufacturing and ancillary equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Troubleshoot, repair, adjust and maintain manufacturing and ancillary equipment., • Troubleshoot, repair, adjust and maintain hydraulic, pneumatic, mechanical, electrical and electronic systems., • Possess an ability to use monitoring and testing equipment to facilitate in the troubleshooting, repairing, adjusting, and maintaining of manufacturing and ancillary equipment., • It is the responsibility of the maintenance individual to further his abilities, skills knowledge to expand his capabilities in troubleshooting, repairing, adjusting and maintaining existing as well as new equipment and technology., • Responsible for working safely, follow LO/TO and electrical safety policies. OR 8 hour 12 days on 2 days off schedule of 11pm - 7am OR 3pm - 11pm Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Two-year certificate from college or technical school with a focus in machining and/or electronics; or two years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to stand; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. The employee is occasionally required to sit, climb or balance, and taste or smell. The employee must occasionally lift and/or move more than 100 pounds. WORK ENVIRONMENT While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; risk of electrical shock; risk of radiation; and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Maintenance Mechanic who performs mechanical repairs on all production and non-production equipment. Key Responsibilities: • Follows all safety process and procedures in accordance with the job and Company policy., • Interprets machine operation manuals and identifies problem source., • Disassembles and removes, repairs and/or replaces defective components on manufacturing equipment., • Specifies and quotes replacement items for manufacturing equipment and facilities., • Performs preventative maintenance, including lubricating and cleaning of manufacturing equipment., • Performs simple repairs on building and grounds (windows, fences, doors, etc.) and plumbing., • Construct simple facility improvement projects (door frames, shelving, partitions, etc.)., • Visually inspects and tests machinery and equipment., • Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine., • Cleans and lubricates shafts, bearings, gears, and other parts of machinery., • Installs and repairs electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment., • Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic. equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment., • Repairs and maintains the physical structure of the establishment., • Must possess own tools., • Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers and a firm grasp of Ladder Logic is required., • Be able to respond to call-backs in emergency break down situations on an as needed basis., • Intermediate Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry., • The noise level in the work environment is usually loud., • This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.Hours:, • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job DescriptionDescription: Supervisory Responsibilities: None Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. · Follows all safety process and procedures in accordance with the job and Company policy. · Interprets machine operation manuals and identifies problem source. · Disassembles and removes, repairs and/or replaces defective components on manufacturing equipment. · Specifies and quotes replacement items for manufacturing equipment and facilities. · Performs preventative maintenance, including lubricating and cleaning of manufacturing equipment. · Performs simple repairs on building and grounds (windows, fences, doors, etc.) and plumbing. · Construct simple facility improvement projects (door frames, shelving, partitions, etc.). · Visually inspects and tests machinery and equipment. · Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem. or repair machine. · Cleans and lubricates shafts, bearings, gears, and other parts of machinery. · Installs and repairs electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment. · Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic. equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment. · Repairs and maintains the physical structure of the establishment. · Must possess own tools. · Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers and a firm grasp of Ladder Logic is required. · Be able to respond to call-backs in emergency break down situations on an as needed basis. · Other duties as assigned. Requirements: Education High school diploma or general education degree (GED), or equivalent combination of education and experience. Experience 3-5 years related experience or training. Other Requirements Ability to read blueprints, interpret operation manuals; understanding of manufacturing equipment and facilities; ability to use hand and power tools and mechanical testing equipment; welding, machining and plumbing experience helpful. Computer Skills: Keyboarding Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Intermediate Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasp and twist, climb or balance; stoop, kneel, crouch, or crawl; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the employee is regularly exposed to humid conditions; moving mechanical parts; high, precarious places, extreme heat; extreme cold; risk of electrical shock; toxic or caustic chemicals and outside weather conditions. The noise level in the work environment is usually loud.

Job Description The Medical Assistant will assist the health care providers with patient care in an office setting with an emphasis on health promotion and health education, including direct patient care, documentation via the EMR, minor laboratory testing and preparation, and communication with patients, health care providers, pharmacies, and vendors by performing the duties listed below. The MA will work cohesively with the physicians to support the providers patient schedule, while ensuring optimal patient care is delivered. They will follow company policy and procedures to help promote safe practices for both the patients and the staff. Duties and Responsibilities (include but are not limited to the following): · Prepares patients for examinations. • Takes medical history., • Assists the Physician during examinations., • Explains medical procedures to patients., • Collects laboratory specimens., • Sterilizes medical instruments., • Update’s patient files., • Obtains Patient’s Vital Signs. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to communicate effectively before groups of customers or employees of an organization. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where limited standardization exits. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Temperament: Ability to perform a variety of tasks, often changing assignments on short notice. Working Conditions: Additional hours may be required to complete tasks. Active work environment- frequently moving between departments. Potential risk of bloodborne and airborne pathogen exposure if proper general precautions are not used with patients. Computer Skills: To perform this job successfully, an individual should have knowledge of internet software and multiple medical office systems and EMR’s. The above statement reflects the general duties considered necessary to describe the principal functions of the job as identified and shall not be considered as a detailed description of all work requirements that may be inherent in the position. Job Type: Full-time Pay: 19.00 Benefits: · 401(k) · Dental insurance • Health insurance, • Paid time off 8-hour shift Work Location: In person

Job Description Entry-level position as an Intern or Co-op in engineering/construction materials. Construction Materials and Engineering Technician performs construction materials testing and inspection at construction sites and in our materials laboratories in accordance with American Society of Testing and Materials (ASTM) or other applicable procedures. Performs testing of soil, aggregate, concrete, bituminous, and masonry construction materials. We provide training and certification prior to independent assignments. About 80 percent of the time is spent at active construction sites providing quality control/quality assurance sampling, monitoring, and/or inspection. The remainder of the time is spent in the laboratory conducting standardized tests to verify that materials meet project specification or office documenting field and/or laboratory testing. ü Competitive Pay ü Training and Certifications provided ü Advancement opportunities ATL is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, national origin, sex, sexual orientation, gender identity, genetic characteristics, disability, military status, protected veteran status, and any other basis protected by applicable local, state, or federal law or Executive Orders.

Job Description Job Summary: The Mold Technician is responsible for designing, building, repairing, and maintaining molds used in manufacturing processes. This role requires expertise in working with metal, plastic, or composite molds, along with strong proficiency in reading blueprints, operating machining tools, and ensuring all molds meet established quality and production standards. The ideal candidate will play a key role in supporting efficient manufacturing operations through precise and reliable mold work. Essential Duties and Responsibilities: Mold Fabrication & Assembly: • Manufacture, assemble, and modify molds using machining techniques such as milling, grinding, drilling, and EDM (Electrical Discharge Machining)., • Troubleshoot and repair worn or damaged molds to maintain production efficiency., • Operate CNC machines, lathes, grinders, and other precision tools to fabricate mold components., • Inspect molds for defects and ensure they meet strict quality standards before production use., • Follow all workplace safety protocols and ensure compliance with industry regulations., • May be required to work in various areas of operations when necessary. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • High school diploma or equivalent (technical certification preferred)., • 3+ years of experience in mold making, tool & die, or a related field., • Proficiency in reading blueprints, CAD designs, and precision measurement tools., • Strong knowledge of machining processes, CNC operation, and manual tooling techniques., • Ability to troubleshoot mold defects and perform repairs efficiently., • Apprenticeship or certification in Mold Making, Tool & Die, or related trade preferred., • Experience with injection molding, compression molding, or die-casting molds., • Understanding of various mold materials (e.g., steel, aluminum, plastic composites)., • Familiarity with industry software such as AutoCAD, Mastercam, or SolidWorks., • Communication skills, • Attention to detail, • Good math skills.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success. LOCATION: Rochester, NY SUMMARY: The Corporate Analytical Lab Supervisor will oversee the operations of American Packaging Corporations Corporate Lab located in the Rochester NY facility. This role combines managerial responsibility of the laboratory with technical expertise of flexible packaging. This position is responsible for supporting all APC Centers of Excellence, Product Development, Sales, and Field Tech Service in detailed analysis of product samples. Most of the output of the lab is for internal use, however there are customer interactions and communications as well. This role involves managing and developing laboratory staff, providing leadership and training, keep all SOP’s and documentations up to date, support the hiring process for interns and coops. The Corporate Laboratory Manager collaborate with all departments on product development. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Conduct standardized and customized testing related to flexible packaging accurately and in a timely manner – this role includes daily testing to complete lab requests along with managing the lab, • Monitor and implement laboratory safety protocols to meet and exceed APC’s safety expectations, • Develop and implement testing plans for package and structure analysis and document composition and physical properties to assist development of new APC products, • Proficient in analytical, logical, systematic, and statistical thinking, • Communicate effectively with the leadership team, technical managers, engineers, sales, customers, and suppliers, • Provide mentorship and training to Coops, Interns, and Technical Specialists, • Ability to understand the goal of a lab request and translate into technical testing requirements, • Maintain an archive of analyzed competitive structures., • Coordinate with other labs, including APC and external labs, to have testing completed., • Recommend / research new equipment and instruments, and draft capital requests, • Conduct periodic audits of lab equipment accuracy and repeatability., • Obtain training and maintain skills in conducting and interpreting complex analytical tests- GC, FTIR, DSC, etc., • Conduct product compatibility, abuse resistance, failure analysis, and other tests and investigations in support of Field Service, Quality, and Technical., • Write and maintain Standard Operating Procedures pertaining to analytical equipment as needed., • Maintain laboratory consumables and supplies (i.e.: PPE’s, glass ware, calibration standards, equipment accessories, chemicals, etc…), • Support and follow all plant Safety Rules, GMPs, and other procedural training requirements. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Laboratory experience, preferably in manufacturing, films and polymers, or flexible packaging. • Knowledge of laboratory procedures, safety, and regulations., • Experience in quality control/assurance and quality management systems., • Strong leadership, communication, and organizational skills., • The ability to manage multiple tasks in a dynamic environment. EDUCATION and/or EXPERIENCE Bachelor of Science or Master’s degree in a relevant scientific field, or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze and interpret common scientific and technical journals, equipment maintenance contracts and other legal documents. Ability to respond to common inquiries or complaints from customer, regulatory agencies or members of the business community. Able to prepare reports on lab testing and results that are customer ready. Ability to effectively present information to the technical community, top management, customers, manufacturing, sales, and other public groups. MATHEMATICAL SKILLS Ability to apply foundational and advanced mathematical concepts DATA ANALYSIS AND STATISTICS • Understanding and Interpreting Data: Corporate Laboratory Manager must collect, organize, and interpret data generated from lab tests, experiments, and research effectively., • Statistical Methods: Proficiency in statistical methods, software, and tools is essential for analyzing data and drawing meaningful conclusions., • Validity and Reliability: Ensuring the validity, reliability, and integrity of data is crucial to avoid errors, biases, or inconsistencies. REASONING ABILITY Ability to define problems, collect data, establish facts and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. OTHER SKILLS/ABILITIES: Proficiently operate the following: personal computer, copy machine, and fax machine. Additionally, must successfully work with Excel and Microsoft Word software and general data base software. Maintain confidentiality with critical company product information, effectively manage multiple projects/priorities, meet required deadlines, possess excellent organization skills and effectively communicate with all internal and external customers. PHYSICAL DEMANDS The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Any lifting over 50 pounds would require assistance. Specific vision abilities required by this job include close vision, distance vision, color vision, and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, vibration and fumes or airborne particles (a specific list is available upon request). The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job Description At Atlantic Testing Laboratories (ATL), we offer a dynamic career that blends fieldwork with office assignments. With 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. We're seeking experienced Construction Special Inspectors to join our team! As a Construction Special Inspector, you'll have the opportunity for professional growth and advancement with competitive pay. Construction Special Inspector Perks & Benefits: • Competitive Health Insurance, • Paid training and certification with cash bonuses for successful completion, • Advancement career and opportunity planning, • Variety in daily work assignments, • Paid Vacations/Sick/Personal/Holidays, • Safety training and equipment provided, • Desire any of the following certifications with related experience: ACI, ICC, PCI, CWI, NETTCP, NYSDOT DTI, NYSDOT PCC, NYSDOT QC/QA and NICET, • Able to lift, carry, push, and pull equipment weighing up to 50 pounds, • Basic math and good communication skills, • Possession of a valid New York State driver’s license, • Positive attitude, with ability to work independently and in a team environment, • Provide Special Inspection services in accordance with the Building Code of NYS, • Perform quality sampling, testing and inspection of soil, concrete, masonry, and asphalt materials on construction sites and in laboratory settings, • Follow safety standards and procedures, • Prepare accurate test and inspection reports using electronic report templates, • Effectively communicate with clients and other project stakeholdersATL is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, national origin, sex, sexual orientation, gender identity, genetic characteristics, disability, military status, protected veteran status, and any other basis protected by applicable local, state, or federal law or Executive Orders.

Job Description Job summary: Perform highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety regulations. Perform building and grounds maintenance as directed. Maintain preventative maintenance systems and processes to support manufacturing. Essential Duties and Responsibilities: • Perform highly diversified duties to install and maintain various types of equipment throughout facility., • Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service., • Perform mechanic skills including, but not limited to, mechanical, electrical, troubleshooting, inspection, and repair of machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Tracks and documents all equipment preventative maintenance and repair., • Responsible for determining and tracking inventory for all spare maintenance parts., • Troubleshoot, repair, maintain, install, and perform testing activities on various computer equipment, peripherals, data communication., • Assist on production floor with material handling, repairs, and maintenance., • Provide contractor support., • Preform Simple Machinist duties and responsibilities. Additional Responsibilities: • Conduct tow motor training., • Perform and document regularly scheduled safety checks on tow motors, eyewash stations, and fire extinguishers., • When requested, may work on special projects and various related assignments., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 50 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low to moderate. Education, Skills and Experience: • High school diploma/GED required., • Experience in building, grounds, and machine maintenance, • Ability to use Excel, Word, and Outlook, • Good communication skills., • Strong knowledge of electrical/electronic practices., • Work independently with minimal supervision.

Job Description At Atlantic Testing Laboratories (ATL), we offer a dynamic career that blends fieldwork with office assignments. With 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. We're currently looking for experienced and entry-level Construction Materials Technicians to join our team! As a Construction Materials Technician, you will have the opportunity for professional growth and advancement with competitive pay. Construction Materials Technician Perks & Benefits: • Competitive Pay:, • Entry-level Candidates $20.00-$23.00/hour, • Experienced Candidates $23.00-$30.00/hour, • Competitive Health Insurance, • Paid training and certification with cash bonuses for successful completion, • Advancement career and opportunity planning, • Variety in daily work assignments, • Paid Vacations/Sick/Personal/Holidays, • Safety training and equipment provided, • Ability to lift, carry, push, and pull equipment weighing up to 50 pounds., • Basic math and good communication skills., • Possession of a valid New York State driver’s license., • Positive attitude, with the ability to work independently and in a team environment., • Perform sampling, testing, and monitoring of soil, concrete, masonry, and asphalt materials on construction sites and in laboratory settings., • Follow safety standards and procedures., • Prepare accurate test and inspection reports using electronic report templates.

Job DescriptionWith a network of nearly 200 branches, Loomis armored transportation, cash management centers, and cash inventory vaults keep cash flowing throughout financial institutions and retail businesses across the US. Loomis prides itself on providing employees with opportunities for career advancement and job satisfaction. In fact, many of our company’s managers, vice presidents, and corporate executives started out in the branches as driver/guards and tellers. Our work can be challenging, but the thousands who have stayed with our company for decades will tell you that if you have the desire to learn and the drive to succeed, Loomis is the place to be. Come join our team! PAY: $20.10 per hour Job Description As a Vault Custodian, you work with your team to maintain inventory in our cash vaults for our Loomis customers. Responsibilities • Check identifying numbers or seals on bags of deposits and/or change shipments against the receipts accompanying each bag, or against the provided manifests, • Count items, record amounts and serial numbers, sign and date receipts and manifests, • Load/unload wagons or flatbed carts with bags/boxes of coin, • Sort individual cargo items by route, • Ability to load/unload bags/boxes of currency, checks, and coin weighing an average of 50 lbs. per item several times during a 6 to 10 hour shift, 5 to 6 days a week, • Ability to push wagons, carts, buggies, dollies loaded with cargo weighing up to several hundred pounds, • Unrestricted ability to repetitiously bend, stoop, squat, stand, walk, climb, twist, turn, and reach out, • Ability to perform repetitious lifting of items weighing an average of 50 lbs. each from floor, • Ability to walk continuously between bins, vaults, booths, and counters, • Ability to stand on concrete floor approximately 80 percent of shift, • Ability to sign and record numbers by hand and to make entries on records and prepare reports., • Ability to count, add, subtract and balance columns of numbers · Work in a room within a vault with little or no exposure to outside light · Full-time schedule can potentially consist of an average of 40 to 50 hours/week, with a minimum of 5 days during a 6-day period Benefits Loomis offers one of the most comprehensive employees benefit packages in the industry, which includes: · Vacation and Sick Time (PTO) as well as Paid Holidays · Health & Dental Insurance · Vision Insurance · 401(k) Plan · Basic Life Insurance Plan · Voluntary Life Insurance Plan · Flexible Spending and Health Savings Account · Dependent Care Account Industry leading Training and Development Essential Functions/Job Qualifications • Ability to maintain a stooped or squatting position for several minutes to perform the sorting function., • Ability to walk continuously between bins, vaults, booths, counters., • Ability to stand on concrete floor approximately 80 percent of shift., • Ability to read and speak the English language sufficiently to converse with co-workers and customers, and to read receipts, manifests and reports., • Ability to sign and record numbers by hand and to make entries on records and prepare reports., • Ability to count, add, subtract and balance columns of numbers., • Ability to meet State requirements for handgun license/permit or Security Officer Commission. • Lift: 25lbs vertical lift from 10 inches to 66 inches from the floor (1X), • Lift-Carry: 18lbs vertical lift from 1 inch to 44 inches from the floor, and horizontally transfer 15ft (4X), 18lbs vertical lift from 10 inches to 36 inches from the floor and horizontally transfer 300ft (1X) and 50lbs vertical lift from 10 inches to 36 inches from the floor and horizontally transfer 2ft (2X), • Push-Pull: Horizontally transfer 47lbs of force on a sled (single, non-dominant arm), a distance of 1ft (2X), • Repetitive Coupling: Squeeze Jamar Hand Dynamometer requiring forces up to 30lbs / both right & left hands (4X each) #Warehouse #Security #ArmedSecurity Loomis is an Equal Opportunity Employer and Drug Free Workplace. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Company DescriptionWith a network of nearly 200 branches, Loomis armored transportation, cash management centers, and cash inventory vaults keep cash flowing throughout financial institutions and retail businesses across the US. Loomis prides itself on providing employees with opportunities for career advancement and job satisfaction. In fact, many of our company’s managers, vice presidents, and corporate executives started out in the branches as driver/guards and tellers. Our work can be challenging, but the thousands who have stayed with our company for decades will tell you that if you have the desire to learn and the drive to succeed, Loomis is the place to be. Come join our team!With a network of nearly 200 branches, Loomis armored transportation, cash management centers, and cash inventory vaults keep cash flowing throughout financial institutions and retail businesses across the US. Loomis prides itself on providing employees with opportunities for career advancement and job satisfaction. In fact, many of our company’s managers, vice presidents, and corporate executives started out in the branches as driver/guards and tellers. Our work can be challenging, but the thousands who have stayed with our company for decades will tell you that if you have the desire to learn and the drive to succeed, Loomis is the place to be. Come join our team!

Job Description Company Information: Regional Transit Service (RTS) is a regional transit authority established by New York State with more than 1,000 employees who proudly serve customers and business partners in Monroe, Genesee, Livingston, Ontario, Orleans, Seneca, Wayne, and Wyoming counties. Recognized as one of the best-run transit systems in the nation, RTS partners with the community it serves to provide vital, safe, and sustainable transportation services to nearly 8 million people each year. We carry out our mission by connecting our customers to jobs, school, healthcare, shopping, and recreational activities every day. OVERVIEW: The Master Electrician is primarily responsible for the maintenance and installation of facilities electrical distribution systems and associated electrical equipment. The candidate will be responsible for repairs and improvements to electrical service and devices at RTS facilities in accordance with all appropriate codes and regulations. Secondary responsibilities include performing major and routine repairs typically encountered in maintaining building and shop equipment at a mass-transit facility. The candidate must also demonstrate a level of competency in the general building trades, including carpentry, plumbing, masonry, concrete finishing, and miscellaneous remodeling. The successful candidate will be assigned to complete all tasks within the scope of RGRTA/RTS Buildings and Grounds mechanical work. WAGE: $40.27per hour. Tentative Work Hours: Monday Friday, 6:00 AM 2:30 PM Why you should join the RTS Team! • Consistent weekly pay, • Career Longevity and opportunities for growth, • Work/life balance."Work to live, not live to work.", • Job security. Public Transportation is a long-term solution to climate change policy., • Cutting-edge internal technical training department. We support you., • Vehicles contain the latest technology. We provide the tools and equipment to help you succeed., • Excellent HealthBenefits Medical, Dental, Vision, • Top compensation and pension plan, • Work boot & tool allowance, • On-site 24/7Fitness and Wellness Center, • Deferred Compensation, • Employee Assistance Program (Counseling, Health Advocacy, Financial & Legal Consultation, Health Coaching, Virtual Concierge, Discounts), • Well-Being Program, • Connect wires to circuit breakers, transformers, or othercomponents., • Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance withcodes., • Advise management on whether continued operation of equipment could behazardous., • Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety ofsystem., • Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and localcodes., • Prepare sketches or follow blueprints to determine the location of wiring and equipment and to ensure conformance to building and safetycodes., • Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and testlamps., • Install ground leads and connect power cables to equipment, such asmotors., • Repair or replace wiring, equipment, and fixtures, using hand tools and powertools., • Work from ladders, scaffolds, powered lifts, and roofs to install, maintain or repair electrical wiring, equipment, andfixtures., • Place conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits betweenboxes., • Fasten small metal or plastic boxes to walls to house electrical switches oroutlets., • Must have a full set of tools to perform all jobsassigned., • Must be able to lift at least 75 lbs., • A valid NYS driver's license and clean driving record required., • Must obtain a New York State CDL Class Bpermitwith passenger and air brake endorsement prior to start date., • Current license as a Master Electrician (Three-phase) issued by the City of Rochester Electrical Examining Board EDUCATION & EXPERIENCE: • High School Diploma or Equivalent (GED), • Candidate must have met all requirements as listed above. KNOWLEDGE, SKILLS, & ABILITIES: • The ability to assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools, • The ability to diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem, • Proficient computer skills, including basic Microsoft Office, Trapeze EAM, Adobe Acrobat Reader, • Excellent verbal and communication skills, • Strong time management skills PHYSICAL DEMANDS AND WORK ENVIRONMENT: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear.The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms.The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl.The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.While performing the duties of this job, the employee frequently works in outside weather conditions.The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration.The employee works near moving mechanical parts.The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. Additional Information: Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result. RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. shift schedule: 12 Hour Nights: This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. Shift Differential of $2 per hour for night shift. job purpose: The Filler Operator is responsible for filling containers of all products supplied by the processing department, beginning with the sterile preparation of raw materials through the blow molder to inspection equipment beyond the capper. This position is expected to maintain the integrity and sterilization of all packaged products throughout the associated equipment. The individual will complete the required routine documentation and ensure legal parameters are complied with. They will perform product testing and evaluation protocols as outlined by Packaging, Quality, and Maintenance department requirements. The Filler Operator also cleans the machines according to food processing standards, troubleshoots issues, performs minor repairs or adjustments, and clears any jams that may occur during production. responsibilities: • Follow all safety, working, and Good Manufacturing Practice (GMP) rules., • Report to and follow the directions of Production Supervisors., • Demonstrate the ability to safely operate moving equipment and make the appropriate adjustments within process limits in order to package accurate and defect-free full bottles., • Observe machine operations to ensure quality conformity to specifications and standard operating procedures for all packaged products moving on to the next equipment center., • Weigh and inspect filled, capped bottles routinely to verify specifications are met throughout production runs. Work with the Quality Assurance department to confirm the product complies with all requirements for the duration of runtime., • Communicate with material handlers to supply filling equipment with the required production materials or cleaning agents., • Count and record finished or rejected packaged items., • Clean (CIP) and/or sterilize (SOP) the blow molder, filler, capper, coder, inspection units, and surrounding areas. Maintain the entire filling room in audit ready condition both during and after production., • Proactively monitor the production line, inspection equipment, and surrounding conveyors to watch for any problems including backups, jams, or rejects. Efficiently resolve stoppages and continue production in a timely manner while recording all downtime reasons., • Stop and troubleshoot machines when faults occur, clear machine jams, then report malfunctions to the appropriate supervisor and/or technician., • Oil properly, troubleshoot problems, perform minor repairs using the correct tools, and participate in Preventive Maintenance on the filling equipment., • Aid in the training of new personnel or upskilling of team members. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Basic computational skills including simple math and reasoning required., • Must be able to operate the equipment effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment, • HMI (human machine interface) devices and process trending are needed for the position. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Filler Operator stands throughout their shift, walks on uneven concrete and tile surfaces, and could lift up to 50 pounds at once., • Pushing/Pulling/Bending/Stooping – The Filler Operator pushes/pulls wheeled carts, material containers, and product samples for testing. The Filler Operator pushes/pulls while using brooms, dust mops, and brushes during cleanup duties. The Filler Operator bends/stoops occasionally throughout the workday for varying lengths of time., • Squatting/Kneeling/Crawling/Twisting/Turning – The Filler Operator may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist when testing product, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Filler Operator steps on and off equipment platforms and climbs stairs to access equipment. The Filler Operator reaches below and/or above shoulder level when removing or adding boxes to a pallet and dumping materials into a hopper., • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected. reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt This position is bonus eligible. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$29—$29 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. shift schedule: 12 Hour Days: This is a day shift position, with hours from 6:00 AM to 6:00 PM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. job purpose: The Filler Operator is responsible for filling containers of all products supplied by the processing department, beginning with the sterile preparation of raw materials through the blow molder to inspection equipment beyond the capper. This position is expected to maintain the integrity and sterilization of all packaged products throughout the associated equipment. The individual will complete the required routine documentation and ensure legal parameters are complied with. They will perform product testing and evaluation protocols as outlined by Packaging, Quality, and Maintenance department requirements. The Filler Operator also cleans the machines according to food processing standards, troubleshoots issues, performs minor repairs or adjustments, and clears any jams that may occur during production. responsibilities: • Follow all safety, working, and Good Manufacturing Practice (GMP) rules., • Report to and follow the directions of Production Supervisors., • Demonstrate the ability to safely operate moving equipment and make the appropriate adjustments within process limits in order to package accurate and defect-free full bottles., • Observe machine operations to ensure quality conformity to specifications and standard operating procedures for all packaged products moving on to the next equipment center., • Weigh and inspect filled, capped bottles routinely to verify specifications are met throughout production runs. Work with the Quality Assurance department to confirm the product complies with all requirements for the duration of runtime., • Communicate with material handlers to supply filling equipment with the required production materials or cleaning agents., • Count and record finished or rejected packaged items., • Clean (CIP) and/or sterilize (SOP) the blow molder, filler, capper, coder, inspection units, and surrounding areas. Maintain the entire filling room in audit ready condition both during and after production., • Proactively monitor the production line, inspection equipment, and surrounding conveyors to watch for any problems including backups, jams, or rejects. Efficiently resolve stoppages and continue production in a timely manner while recording all downtime reasons., • Stop and troubleshoot machines when faults occur, clear machine jams, then report malfunctions to the appropriate supervisor and/or technician., • Oil properly, troubleshoot problems, perform minor repairs using the correct tools, and participate in Preventive Maintenance on the filling equipment., • Aid in the training of new personnel or upskilling of team members. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Basic computational skills including simple math and reasoning required., • Must be able to operate the equipment effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment, • HMI (human machine interface) devices and process trending are needed for the position. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Filler Operator stands throughout their shift, walks on uneven concrete and tile surfaces, and could lift up to 50 pounds at once., • Pushing/Pulling/Bending/Stooping – The Filler Operator pushes/pulls wheeled carts, material containers, and product samples for testing. The Filler Operator pushes/pulls while using brooms, dust mops, and brushes during cleanup duties. The Filler Operator bends/stoops occasionally throughout the workday for varying lengths of time., • Squatting/Kneeling/Crawling/Twisting/Turning – The Filler Operator may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist when testing product, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Filler Operator steps on and off equipment platforms and climbs stairs to access equipment. The Filler Operator reaches below and/or above shoulder level when removing or adding boxes to a pallet and dumping materials into a hopper., • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected. reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt This position is bonus eligible. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$29—$29 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.