Trabajos construction labor en Clifton, New JerseyCrear alertas

Overview Remedial Construction Services, L.P. is an environmental remediation, geotechnical construction, and civil construction contractor founded in 1989. We are a national leader in environmental remediation services, including soil remediation, soil stabilization and solidification, landfill cap and cell construction, permeable reactive barriers, deep soil mixing, biopolymer trenches, slurry walls and demolition of hazardous waste sites. Construction Laborers are responsible for performing tasks involving and related to physical labor onsite for environmental remediation, civil, geotechnical and demolition construction projects. Responsibilities Observe and comply with all company and specific site safety and project policies Supply input to Job Safety Analysis (JSA) and frequent improvements or changes to the Job Safety Analysis Plan (JSAP) Dig ditches or trenches, backfill excavations, compact and level earth to grade specifications, using picks, shovels, pneumatic tampers and rakes Clean, remove and prepare materials used on site to eliminate possible hazards Control traffic passing near, in and around work zones; signal equipment operators to facilitate alignment, movement and adjustment of machinery, equipment and materials Measure, mark and record openings and distances to layout areas where construction work will be performed Observe and comply with all company and specific site safety procedures and project policies, and maintain the construction site in strict accordance with OSHA guidelines Communicate professionally and respectfully with others by all means possible (visual or radio contact) including interpreting hand signals to determine where materials are to be placed or loaded May perform a variety of manual tasks for extended periods of time, including lifting, positioning and securing materials during installation Responsible for care and custody of tools being used, including daily cleaning and maintenance May perform other miscellaneous duties as assigned Qualifications Previous experience working in construction Must be able to travel as required over extended periods of time Must be able to operate construction tools by hand Must be able to preform the duties of a labor while using different levels of PPE and respiratory equipment, when necessary. Must be able to perform the duties of a laborer while working in all outdoor weather conditions Must have the ability to read, write and understand math and English to respond to customer requests and follow instructions Ability to lift up to 50 pounds regularly, climb, operate motorized vehicles and equipment, work in confined spaces, at heights and around heavy equipment required Must be able to work in a construction environment with potential exposure to dust, noise, waste, toxic and infectious materials and in possible inclement weather Education/Experience: High School diploma or equivalent required 40-Hour HAZWOPER training required for positions at most job sites (or current 8 Hour HAZWOPER refresher course) and MSHA certification preferred Previous construction industry experience preferred Recon is an Equal Opportunity Employer. We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply. Equal Employment Opportunity

Job DescriptionField SuperintendentAbout the Company Our client is a well-established, growth-oriented commercial flooring contractor with a strong reputation for execution, professionalism, and long-term customer relationships. They partner with general contractors, developers, and end users on high-profile projects and are known for delivering quality work while maintaining a highly collaborative, team-driven culture. This is an organization that values accountability, attention to detail, and people who take pride in owning their projects from start to finish. Core Objective Serve as the professional face of the company in the field. Execute projects safely, strictly to manufacturer specifications, on schedule, and within budget to protect gross profit and exceed customer expectations. You own the physical jobsite and labor execution. Pre-Construction & Planning • Sales Support: Collaborate with Sales during the pricing phase to provide accurate labor estimates, identify logistical challenges, and recommend means and methods that improve profitability., • Site Validation: Conduct pre-job site walks to assess subfloor conditions and verify that material quantities align with actual field conditions., • Labor Buy-Out: Secure and manage qualified in-house and subcontract labor based on established project budgets.Field Execution & Professionalism, • Jobsite Excellence: Maintain a clean, organized, OSHA-compliant, and highly professional jobsite. Coordinate effectively with customers, general contractors, and other trades., • Quality Control: Monitor site conditions and installation methods to ensure all work aligns strictly with manufacturer specifications., • Material Management: Coordinate deliveries and oversee receipt, storage, and tracking of all materials to prevent loss, damage, or theft.Financial Oversight & Closeout, • Scope Protection: Identify out-of-scope work in real time. Do not proceed with additional work without proper approval and executed change orders., • Invoice Management: Review and approve subcontractor invoices based on verified progress and adherence to budget., • Project Closeout: Drive punch list completion, ensure proper documentation, and deliver attic stock to the customer, leaving a strong final impression.What They’re Looking For, • Strong field leadership with the ability to manage multiple projects and crews, • High attention to detail and commitment to quality execution, • Ability to communicate effectively with customers and internal teams, • Comfortable taking ownership and operating with minimal oversight, • Experience with commercial flooring installation and jobsite management

Maintenance Manager Lyndhurst, NJ, USA Company Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemical company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF11.20 billion in sales in 2025. Job Description This position is responsible for planning, directing, and managing all technical resources for the Lyndhurst facility, including building, infrastructure, and equipment. The role oversees capital budget projects, maintenance operations, and supervises the Engineering and Maintenance departments. Key Responsibilities: • Develop, implement, and continuously improve a preventive maintenance system; monitor effectiveness and optimize overall equipment effectiveness (OEE), • Manage and supervise the Maintenance Department workforce, including Shift Mechanics and Instrument and Control Technicians; optimize labor and materials utilization, • Lead capital investment projects and major facility initiatives from planning through execution, ensuring alignment with project scope, timeline, and budget parameters, • Train and guide manufacturing teams to ensure proper equipment maintenance and operational capability, • Establish departmental goals and performance standards; provide professional development and coaching to technical personnel, • Develop and administer the Engineering and Maintenance departmental budget in cooperation with management, • Ensure compliance with company policies regarding safety, purchasing, regulatory requirements, and labor relations, including ISO 14000, RC9001, QS9000, and TS16949 certifications Qualifications • B.S. in Engineering (Mechanical or Electrical); advanced degree preferred, • 5+ years' experience in chemical and industrial manufacturing environments with demonstrated project management expertise, • Excellent communication and employee relations skills across all organizational levels, • Strong technical analysis and problem-solving capabilities with ability to function in fast-paced, dynamic environments, • Knowledge of regulatory requirements and industry certifications (ISO 14000, QS9000, TS16949) Additional information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities, • Employee Referral Program & More! Sika fosters a culture of entrepreneurship, empowering each individual to make decisions, learn from experiences, and shape their own career path. The safety and well-being of employees are top priorities at Sika, with a strong commitment to open communication and maintaining a safe workplace. In addition, Sika actively contributes to the community and promotes sustainability by giving back, minimizing environmental impact, and embracing social responsibility. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Overview: Schedule: Sunday-Monday 10:30 PM - 7:00 AM Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • General construction activities such as shoveling, lifting, pulling, • Perform traffic control such as guiding vehicles and equipment to appropriate areas, placing signs and cones for vehicle direction, • Effective communication with drivers, employees, and management via hand held radios and CBs, • Perform site clean-up, • Clean up of vehicles and equipment as needed, • Driving employees to their work stations as needed, • Fuel vehicles and equipment, • Set-up/ secure wind fences and landfill coverings, • Follow OSHA safety standards and wear required PPE, • Perform other duties assigned by manager as necessary Requirements and Qualifications::, • Applicants must be at least 18 years of age and legally eligible to work in the United States, • 1 year of relevant labor experience is preferred, • Able to work in an outdoor environment on a constant basis while being exposed to variable weather conditions, temperatures, chemicals, dust, fumes, smells, and loud noises., • Must be able to lift/push/pull at least 50 pounds, • Experience operating equipment is a plus Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $19.00/Hr. Salary Range Maximum: USD $19.00/Hr.

Overview: Schedule: Monday-Saturday 6:30 AM-3:00 PM Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • General construction activities such as shoveling, lifting, pulling, • Perform traffic control such as guiding vehicles and equipment to appropriate areas, placing signs and cones for vehicle direction, • Effective communication with drivers, employees, and management via hand held radios and CBs, • Perform site clean-up, • Clean up of vehicles and equipment as needed, • Driving employees to their work stations as needed, • Fuel vehicles and equipment, • Set-up/ secure wind fences and landfill coverings, • Follow OSHA safety standards and wear required PPE, • Perform other duties assigned by manager as necessary Requirements and Qualifications::, • Applicants must be at least 18 years of age and legally eligible to work in the United States, • 1 year of relevant labor experience is preferred, • Able to work in an outdoor environment on a constant basis while being exposed to variable weather conditions, temperatures, chemicals, dust, fumes, smells, and loud noises., • Must be able to lift/push/pull at least 50 pounds, • Experience operating equipment is a plus Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $18.00/Hr. Salary Range Maximum: USD $18.00/Hr.

Construction Attorney 💼 Mid-Size firm with 1900 Billable Target ⌛ Up to $280K Base + Bonus 💰 Hybrid in New Jersey📍 I am currently working with a Mid-Size firm based in New Jersey who are actively seeking an experienced Construction Attorney to join their ranks as they look to make expansion hires. Here are the headlines: The Firm 🏢 • Full Service New Jersey Powerhouse – With over 100+ Attorneys operating in all Practice Areas, the firm has established itself as a cornerstone of New Jersey Law!, • Multi Award-Winning Environment - The firm has received accolades across awards such as ‘Best Law Firm’, ‘New Jersey Firm of the Year’ as well as consistent Chambers recognition, • Global Powerhouse Clientele – Represent Fortune 500 Companies, National Business and longstanding clients that have been with the firm since the 1970’s!, • Super Lawyer Environment – Work alongside some of the best Lawyers in the state in a firm that has multiple Nationally Ranked Practices! The Role 💼 • Lead Construction Litigation and Advisory Matters -Manage a broad range of construction matters, delivering strategic and commercially focused legal advice to clients., • Develop Case Strategy and Risk Mitigation Solutions - Oversee complex legal and technical analysis of construction projects, applying knowledge of construction law to shape dispute resolution strategies, • Draft and Negotiate Key Project Documentation - Review, draft, and negotiate construction contracts, subcontracts, consultant agreements and settlement documents, • Drive Client Relationships and Sector Growth - Act as a trusted advisor to developers, contractors, and consultants as well as supporting business development initiatives and contributing to the growth of the construction practice. The Requirements ✔️ • 10+ Years Experience, • Labor and Employment Experience The Package 💰 • Base Salary up to $280K Base

URGENT OPENING!! Come join a leading heavy civil contractor as a Heavy Civil Estimator!! This Jobot Job is hosted by: Ryan Anderson Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $120,000 - $130,000 per year A bit about us: We are seeking a dynamic and experienced Heavy Civil Estimator to join our team. This is a permanent position that offers a unique opportunity to play a critical role in the growth and expansion of our company. The Heavy Civil Estimator will be responsible for preparing detailed cost estimates for heavy civil construction projects, including earthwork, concrete structures, and flatwork. This role requires a strong understanding of construction processes, excellent analytical abilities, and a keen eye for detail. Why join us? Come and join us for a rewarding career with excellent salary, benefits, and career growth opportunities! Benefits include but are not limited to: 401k w/ Match Health, Vision, & Dental Insurance Paid Time Off Paid Holidays Paid Sick Leave Company Truck and Gas Card Provided Solid Company Culture Job Details Responsibilities: • Analyze blueprints, specifications, proposals, and other documentation to prepare time, cost, and labor estimates for projects or services., • Prepare detailed, accurate and competitive estimates for heavy civil construction projects including earthwork, concrete structures, and flatwork., • Conduct thorough risk and opportunity analyses for each estimate., • Review and evaluate cost estimates to ensure accuracy, completeness, and compliance with defined scope of work., • Participate in the preparation and presentation of estimate/proposal documents, including specific strategies, cost breakdowns, and value engineering options., • Work closely with project managers, engineers, and field staff to ensure estimates accurately reflect the project's scope and conditions., • Utilize software for data compilation, analysis, and generation of estimates., • Participate in project bidding, negotiations, and handover processes., • Provide recommendations for cost analysis, budgeting, and project scheduling., • A minimum of 5 years of experience in heavy civil construction estimating., • Bachelor's degree in Civil Engineering, Construction Management, or a related field is preferred., • Proven ability to read and understand civil blueprints, plans, and specifications., • Proficient in construction estimating software and tools., • Strong knowledge of construction materials, processes, and equipment., • Excellent analytical, problem-solving, and decision-making skills., • Strong communication and interpersonal skills to collaborate effectively with team members and clients., • Ability to manage multiple projects and meet tight deadlines., • Familiarity with project bidding, value engineering, cost analysis, and budgeting., • Advanced knowledge of safety and legal regulations related to heavy civil construction., • Professional certification in estimating or a related field will be an added advantage. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Come join a General Contractor specializing in retail projects! Base + Bonuses! This Jobot Job is hosted by: Chris Gorman Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $145,000 - $150,000 per year A bit about us: We are a full-service real estate development and construction firm delivering more than three decades of construction expertise in commercial developments across California. We’re seeking a dynamic Senior Estimator with experience in Commercial projects in San Diego. This role also requires strong sales acumen and comfort with face-to-face client interactions. As part of our dynamic team, you will play a key role in securing new business opportunities while ensuring accuracy, competitiveness, and alignment with company standards. Why join us? • Competitive base pay and overall compensation package, • Full benefits: Medical, Dental, Vision, • Generous PTO, vacation, sick, and holidays Job Details Responsibilities: 1. Preparing comprehensive and accurate cost estimates for commercial and retail projects., 2. Analyzing blueprints, specifications, proposals, and other documentation to prepare time, cost, and labor estimates., 3. Collaborating with project managers, engineers, and architects during the cost estimation process., 4. Reviewing design options and recommending best solution based on cost, engineering quality, or availability of materials., 5. Assessing cost effectiveness of products, projects or services, tracking actual costs relative to bids as the project develops., 6. Conducting risk analysis and providing strategies to mitigate them., 7. Utilizing estimating software systems to maximize efficiency and accuracy., 8. Keeping abreast of industry trends and advancements in construction technology., 9. Participating in proposal presentations and client meetings. Qualifications: 1. A minimum of 4 years of experience as a Estimator in the construction industry., 2. Proven experience in commercial projects., 3. Proficiency in using estimating software systems(e.g., PlanSwift, Bluebeam, CostX) and MS Office suite., 4. Exceptional analytical and mathematical skills, with high levels of accuracy., 5. Excellent communication and negotiation skills., 6. Ability to work under pressure and meet tight deadlines., 7. Strong understanding of construction processes, materials, and legal regulations. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description PLEASE READ JOB DESCRIPTION & DUTIES CAREFULLY BEFORE APPLYING This is a seasonal position (October thru January). We'll work with your schedule if needed. Hours: Mornings and Afternoons Mon-Fri with option to work Saturdays and Sundays We are looking to hire crews ASAP! Awesome ownership, great hours, flexible and competitive pay. Job Description: Install outdoor holiday lighting on residential and commercial properties. This also includes taking down lights in January and any service calls, as necessary. Duties and Responsibilities: • Must be comfortable and safe while working on ladders (in all weather conditions), • Must be comfortable working outside all day and in all weather conditions, • Must be comfortable working on houses and different types of roof tops, • Must be willing and able to perform manual labor up to 8 - 12 hours per day, • Maintain excellent customer service skills, • Ability to lift between 50 - 100lbs, • High School Diploma/GED, • 1 year of general labor or construction preferred, • For more info about Decorate With Lights of North Central NJ, click here., • For more info about Mosquito Shield of North Central NJ, click here.

Job Description Company Overview Fitz's Fish Ponds is a distinguished company known for designing, constructing, and maintaining outstanding ponds, waterfalls, and other water features. We believe that each water feature should be unique and welcome creative concepts. Our teams are made up of talented and creative individuals, and as our company expands, we are constantly seeking to welcome more members to our team! Position Summary As a Retail Store Manager, you will be responsible for the daily operations of the store, including employee management, driving sales, and providing outstanding customer service to our clients. You will play a key role in overseeing the store budget, inventory, merchandising, order fulfillment, projects, and events, while also cultivating a creative and collaborative atmosphere that embodies our dedication to customer success. Responsibilities • Oversee the training process for new employees, focusing on FFP culture, product knowledge, sales techniques, and various associate responsibilities. Ensure that all team members are held accountable for their individual KPIs and objectives., • Develop staff by enhancing their knowledge and offering opportunities for ongoing growth; establish succession plans to prepare associates for future promotions., • Ensure payroll alignment by managing store schedules, overseeing labor costs, and adjusting to business conditions according to weekly, monthly, and quarterly sales. Plan payroll and scheduling based on store traffic to guarantee that the team is adequately staffed to assist customers effectively., • Establish an effective inventory management process by utilizing our POS and company software system. This includes executing essential business directives like price adjustments and ticketing procedures. To ensure loss prevention, focus on training associates, overseeing daily store activities, and ensuring that company policies are adhered to at all times., • Uphold the store's visual standards in alignment with the company's culture and creative vision, ensuring that product displays are consistent with other locations. Take the lead in making decisions regarding visual merchandising strategies, tailored to the layout and specific requirements of the store., • Responsible for maintaining appropriate product levels in both the greenhouse and on the sales floor by strategically planning and managing floor replenishment., • Analyze sales figures, interpret trends, and forecast future sales to manage all controllable costs and keep operations profitable., • Provide an exceptional and meaningful customer service experience that promotes the product and builds brand relationships. Service multiple customers at a time, multi-task and/or handle projects simultaneously., • Tasked in assisting in the cleaning and upkeep of the koi fish, plants, green houses, store tanks while ensuring the overall property is well-kept at all times. Keep the outdoor area well-maintained as necessary, which includes activities such as leaf blowing, weeding, and planting., • Recognize the appropriate moments to refer a customer to another department within the organization, such as Construction or Service, while ensuring that all relevant information is collected., • 3-4 years of experience in Retail Store Management or similar industry - Required, • 3-4 years of experience managing and leading a team of associates - Required, • Heavy machinery operation experience - A Plus!, • Extraordinary interpersonal and communication skills, both verbal and written, • Ability to carry out job responsibilities in a high-volume, fast-paced setting, • Physical requirement involving the exertion of force up to 45 pounds, including standing, lifting, and walking flights of stairs, • High School Diploma, GED or equivalent - Required, • Available for varied weekly shifts including weekends, holidays, peak seasons, open and closings as needed - Required, • Familiarity with ponds, aquariums, aquatic plants or fish - a plus! Position Information Full-Time | Starting at $60,000/annually with growth opportunities Depending on Experience Tuesday - Saturday 10:00am - 5:00pm, Sunday 10:00am - 4:00pm (Days and Hours may vary) Benefits ● 401k and company match ● Dental Insurance ● Medical Insurance ● Vision Insurance ● Employee company discount ● High-growth and promotion opportunities! Powered by JazzHR qzq7LOsGQ4

At Kushner, we pride ourselves on our four core values: Be Caring, Be Best in Class, Be Solution-Oriented, and Be Accountable. Our values represent what we strive to achieve every day. Every decision we have to make is guided by the “4 Be’s”. Our team and passion for the real estate industry exemplifies what it means to live out these core values in our offices and at our communities day in and day out. Each new day is a learning experience at Kushner, whether it is the knowledge we bring, gain, or share during our journey together. Our team members are set up to aim beyond, achieve the utmost success, and for endless possibilities for growth. Come Grow With Us! JOB SUMMARY This position is responsible to lead one or more construction projects and for the management of the overall planning, scheduling, code compliance, cost tracking, safety, and completion of these projects. The Superintendent is responsible for directing and mentoring subcontractors and other on-site field staff. The position requires business management acumen and must demonstrate strong leadership, organizational and time management skills, as well as have strong communication and team building skills. WORK HOURS: Weekdays 7 am to 5 pm; Saturdays 7 am- 1pm, as required. RESPONSIBILITIES: • Assure the required permits and approvals from jurisdictional agencies are secured, posted, and renewed as required prior to starting work., • Develop, update, modify (as required) and maintain the project schedule including a master schedule, 60-day look ahead schedules for their assigned trades, and two-week look ahead schedules for their assigned trades., • Understand and be familiar with the date by which all materials must arrive on the job and convey that information to the project management team for preparation of the contract items lists and shop drawing schedules., • Coordinate scheduling of subcontractors, vendors, and inspectors to complete each project on time., • Communicate with and support each subcontractor to execute their job duties effectively and efficiently., • Monitor work and materials to ensure quality control standards are met at various stages of the project., • Perform inspections or schedule inspectors to meet the varying safety and compliance regulations of each job location., • Prepare the daily construction reports in a thorough and timely manner and maintain a written daily log of visitors, job actions performed, materials expended, and problems resolved on the job site., • Assure daily job progress photographs are taken in ample quantity to accurately depict the progress of the work., • Travel between multiple job sites and simultaneously manage work loads of individual projects, • Understand and ensure risk controls are properly established and maintained., • Understand and uphold the site safety plan., • Understand and uphold the site logistics plan., • Assure the implementation and continuous maintenance of corporate safety program requirements in all of the day-to-day operations on the project., • Prepare and attend the weekly subcontractor meetings. Assist in maintaining the minutes of these meetings, and ensure they are recorded and distributed., • Prepare and manage weekly safety meetings, regular toolbox talks, and safety pre task meetings as required., • Attend weekly meetings with the project team for purposes of updates on the status of the field work and communication of any issues requiring the input or action of others on the project team, and for notification to the project team of issues that may be of importance or interest to them., • Establish and maintain a system of document control to assure work is being installed in accordance with the latest design documentation and approved shop drawings., • Communicate any issues requiring additional information from designers and consultants in a timely fashion to the project manager for issuance of RFI’s., • Assist in preparation of the monthly status report to be submitted to the lender. REQUIREMENTS: • Requires Engineering, Construction Management or related Bachelor’s degree, OR equivalent years of related experience., • Requires 10+ years of experience in Stick-frame Multi-Family Residential Construction. Previous Sitework and Structured Garage Construction experience is preferred., • Requires working knowledge of various construction disciplines, cost control, scheduling, safety regulations, engineering drawings and other documents required., • Requires superior communication and interpersonal (tact, diplomacy, influence, etc.) skills essential both within the internal project team and externally with subcontractors, labor force, etc., • Requires the ability to work with and have knowledge of the shop drawing submittal process., • Requires the ability to read and comprehend building plans and specifications and able to comprehend and recognize safety standards and issues., • Requires the ability to determine the priority of assignments based on critical deadlines., • Requires the ability to resolves field-initiated questions., • Requires understanding of construction contracts, retention, releases., • Requires the ability to interact with all levels of personnel and customers., • Must possess strengths in verbal and written communications; ability to adapt communications/presentations and deliver clear and concise reports and analysis to senior management., • Requires ability to meet deadlines and work in a structured corporate environment., • Requires the ability to be self-motivated and work independently with minimal supervision. Also requires high degree of ethics and integrity., • Requires ability to maintain confidentiality of all company and customer information. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. These demands are typically required when working onsite. • Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction., • Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus., • Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch, or crawl., • Must occasionally lift and/or move up to 50 pounds., • While performing the duties of this job, the employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock., • Noise in these work environments is usually moderate to very loud. Benefit Highlights: • $2k relocation benefit available, • We match 50% of the first 6% of 401k contributions, • No wait period for Health Benefits & we contribute $1k to the HSA plan, • We have assistance for student loans as well as tuition reimbursement, • We have a great employee referral program, • We offer a housing discount in all our communities EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER

Job Description Food/ Snack Manufacturing Company Urgently Hiring Machine Operators to Start Within Same Week of Applying Overnight Shifts Available! Location: Totowa, NJ 3rd Shift: 12:00am-8:30am (Monday-Friday) Pay: $20-$22/hour ; Overtime: $30-$33/hour (A lot of Overtime Available) Job Description As a Cleanroom Technician, you will play a crucial role in the production process by operating machinery for ingredient intake and staging, verifying the correct use of ingredients and labels, and performing visual inspections on incoming raw materials. Your focus will be on supporting quality control checks during receiving activities and ensuring materials adhere to QA quarantine or release procedures. Responsibilities • Operate and monitor equipment supporting ingredient intake., • Verify ingredient identity, lot numbers, and labels prior to use., • Inspect raw materials for damage, contamination, or quality deviations., • Stage materials according to QA hold or release status., • Follow SOPs, GMPs, and food-safety requirements., • Communicate material issues to QA or supervision., • Support food-safety and traceability requirements without record ownership., • Monitor equipment performance and report issues., • Follow sanitation, hygiene, and safety requirements., • Assist with equipment cleaning during line changeovers., • GMP environment experience., • Cleanroom expertise., • Production and food manufacturing knowledge., • Materials handling and inspection skills., • Operate and monitor equipment proficiency., • Ability to stand for extended periods., • 6 months to 1 year manufacturing or food production experience., • Familiarity with GMPs and SOPs. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionPackaging Mechanic Job DescriptionPosition Overview We are seeking a skilled Packaging Mechanic responsible for maintaining, troubleshooting, and repairing packaging equipment to ensure efficient production operations. This role focuses on minimizing downtime, improving equipment reliability, and supporting daily production through preventative and corrective maintenance. Key Responsibilities • Perform preventative maintenance on packaging machinery and equipment, • Troubleshoot and repair mechanical, electrical, pneumatic, and hydraulic systems, • Diagnose equipment failures and complete timely repairs to minimize downtime, • Maintain and repair packaging lines, including conveyors, fillers, labelers, sealers, and palletizers, • Conduct routine inspections of equipment to identify wear, defects, or potential issues, • Install, adjust, and calibrate packaging equipment for optimal performance, • Read and interpret blueprints, schematics, and equipment manuals, • Maintain accurate records of maintenance activities, repairs, and parts usage, • Collaborate with production teams to improve equipment efficiency and reduce downtime, • Ensure compliance with safety procedures, including lockout/tagout (LOTO)Qualifications, • High school diploma or equivalent required, • 2+ years of experience as a maintenance mechanic or packaging mechanic in a manufacturing environment, • Strong mechanical and electrical troubleshooting skills, • Experience with packaging equipment such as fillers, wrappers, conveyors, or labeling machines, • Ability to read and interpret technical documents and schematics, • Familiarity with safety regulations and maintenance best practices Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Facilities Maintenance Technician - Building Engineer Location: Newark. NJPay: $34/hrType of Placement: Direct HireShift: Must be open to start Job Description The Facilities Maintenance Technician will be responsible for the daily maintenance and repair of building facilities. This includes work on elevators, conveyor systems, mechanical systems, lighting systems, communication/radio systems, air handling/HVAC units, fire systems, plumbing systems, and more. Technicians may also work with PLC electronic systems, computer controls, and steel frame structures. Responsibilities • Perform maintenance and repair tasks on various building facilities including elevators, conveyor systems, and HVAC units., • Work with communication and radio systems, fire systems, and plumbing systems., • Engage in high and low voltage electrical repairs, including installation and repair of 110/220/480 volt single and multiphase electrical circuitry., • Read and follow wiring schematics for industrial wiring tasks., • Thorough knowledge of general building maintenance with an emphasis on electrical systems., • Experience in electrical troubleshooting including AC & DC circuits and high voltage (480) repairs., • Experience in industrial maintenance, electrical maintenance, and preventive maintenance., • Ability to read and follow wiring schematics., • Experience in electronics diagnostics and troubleshooting., • Valid, clean, applicable state driver's license. Enjoy a $10,000 sign-on bonus with half paid after 30 days and the other half after 12 months. Benefit from yearly pay increases, reaching up to $60.00 an hour after 8 years. Experience extremely competitive benefits. Work Environment The work environment includes both indoor and outdoor settings at airport terminals. Be prepared to work on a flexible schedule that covers all shifts, including weekends and holidays. Schedules are bid and awarded based on seniority. Job Type & Location This is a Permanent position based out of Newark, NJ. Pay and Benefits The pay range for this position is $71802.00 - $71802.00/yr. We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). See attached SOP. Workplace Type This is a fully onsite position in Newark,NJ. Application Deadline This position is anticipated to close on May 22, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionMaintenance MechanicPosition Summary: We are seeking a skilled Maintenance Mechanic responsible for troubleshooting, repairing, and maintaining manufacturing equipment and production systems. This role supports daily operations by minimizing downtime and ensuring all machinery is operating safely and efficiently. Key Responsibilities: • Perform preventative, predictive, and corrective maintenance on production equipment, • Troubleshoot mechanical, electrical, pneumatic, and hydraulic systems, • Repair and replace defective components including motors, conveyors, belts, valves, and bearings, • Read and interpret blueprints, schematics, and technical manuals, • Conduct routine inspections to identify potential equipment issues and implement solutions, • Complete work orders, maintenance logs, and documentation in maintenance systems (CMMS if applicable), • Support equipment installations, upgrades, and changeovers, • Fabricate or modify machine parts as needed using shop tools (welding, machining, etc.), • Communicate with production teams regarding equipment status and downtime, • Maintain spare parts inventory and assist with ordering materials, • Follow all safety procedures including LOTO and maintain a clean work environmentQualifications:, • High School Diploma or equivalent; technical training preferred, • Experience in industrial or manufacturing maintenance, • Strong mechanical aptitude with working knowledge of electrical, hydraulic, and pneumatic systems, • Ability to troubleshoot and repair production equipment independently, • Ability to read blueprints and technical diagrams, • Experience using hand and power tools and precision measuring equipment, • Strong problem-solving skills and attention to detail Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionShipping Clerk Urgently Needed for Food Manufacturing Company in Newark, NJ Urgently Hiring, can interview and start within the same week! Shift: 7am-3:30pm (Monday-Friday) Pay: $22-$23/hour ; Overtime: $33-$34.50/hour Location: Newark, New Jersey Job Description: • Provide training for all shipping personnel including job procedures, paperwork, inventory, safety, and GMPs. Verify accuracy of all data entry and paperwork turned in by the warehouse team., • Provide input and feedback into the employee schedule., • Execute against the schedule, calling in drivers and dispatchers or reducing hours as required., • Organize people and equipment to maximize warehouse productivity., • Input on annual employee evaluations., • Identify potential for growth and training and improve on performance deficiencies., • Participate in disciplinary action proceedings where needed., • Ensure the proper training and safe utilization of all shipping personnel, equipment, including the forklift, electric and manual pallet jacks., • Monitor physical inventory to ensure orders fulfillment, • Communicate order shortage to customer service, • Order material from supplies, • Utilize Batchmaster to record inventory movement., • Perform weekly physical inventory of all finished goods, • Maintain orderliness of material storage areas, • Maintain stock rotation, • Record lot numbers for traceability, • Clean and inspect stock to prevent infestation, • Ensure proper receiving guidelines are followed., • Monitor storage conditions for proper temperatures Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Machine Operator Job Summary: The Machine Operator is responsible for safely operating, monitoring, and maintaining food production equipment to ensure consistent product quality, efficiency, and compliance with food safety standards. Key Responsibilities • Operate food manufacturing machinery in accordance with standard operating procedures, • Set up, adjust, and change over equipment for different products or production runs, • Monitor machine performance and make minor adjustments to maintain quality and efficiency, • Inspect products to ensure they meet quality, weight, and appearance standards, • Identify and report mechanical issues, defects, or safety concerns, • Perform basic troubleshooting and routine preventive maintenance, • Accurately complete production, quality, and downtime documentation, • Follow all food safety, sanitation, and GMP requirements, • Maintain a clean and organized work area, • Previous experience as a machine operator in a food manufacturing or production environment preferred, • Understanding of GMP, food safety, and sanitation standards, • Ability to read and follow work instructions, recipes, and production schedules, • Basic mechanical aptitude and troubleshooting skills Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Stitcher Operator Job Description The Stitcher Operator sets up and operates commercial and industrial sewing machines to produce high-quality custom theatrical draperies. This role works with heavy fabrics, follows detailed production instructions, and ensures that finished products meet quality and safety standards. Responsibilities • Operate commercial and industrial sewing machines to attach adjacent panels of curtain fabric, sew hems, borders, and other required seams., • Cut fabric accurately according to specifications and job travelers., • Lift, handle, and position heavy fabric and draperies safely throughout the production process., • Complete finished custom theatrical draperies in accordance with quality, design, and measurement requirements., • Follow written instructions, including job travelers, safety rules, operating procedures, and maintenance guidelines., • Inspect work in progress and finished products to ensure proper stitching, alignment, and overall quality., • Communicate effectively with sewing leadership, cutting staff, floaters, and other team members to coordinate workflow and resolve production issues., • Maintain a clean and organized work area, including sewing machines and related equipment., • Perform basic machine adjustments and report any equipment issues or maintenance needs promptly., • Carry out other related duties as assigned by management to support production goals and timelines.Essential Skills, • Prior commercial sewing experience or formal training in industrial or commercial sewing., • Proficiency in operating industrial and commercial sewing machines for production work., • Ability to perform precise stitching, hemming, and assembly of fabric panels., • Ability to read and interpret job travelers, safety rules, operating and maintenance instructions, and procedure manuals., • Strong attention to detail to ensure accurate measurements, cuts, and seams., • Ability to lift and handle heavy fabric and draperies safely throughout the shift., • Effective communication skills to work collaboratively with sewing leadership, cutting staff, floaters, and other team members., • Reliable work habits and the ability to follow established production processes and safety procedures.Additional Skills & Qualifications, • Experience in production, assembly, or machine operating in a manufacturing or textile environment., • Background in embroidery or decorative stitching work., • Familiarity with commercial sewing for large-scale or custom fabric products., • Ability to multitask in a fast-paced production setting while maintaining quality., • Willingness to learn additional sewing techniques and machine operations as needed.Why Work Here? Join a production environment where craftsmanship and quality are highly valued, and your sewing expertise directly contributes to creating custom theatrical products. You will work alongside a supportive team that values clear communication, collaboration, and continuous learning. The role offers the opportunity to deepen your technical skills with industrial equipment while contributing to unique, large-scale fabric projects in a stable and process-driven setting. Work Environment This role operates in a production and manufacturing environment focused on custom theatrical draperies. You will work primarily with industrial and commercial sewing machines, cutting tables, and related equipment, handling large and heavy fabric materials. The work involves standing, moving, and lifting throughout the shift, as well as close attention to detailed instructions and measurements. The environment emphasizes safety, adherence to written procedures, and teamwork among sewing, cutting, and support staff. Appropriate work attire suitable for a production floor and handling heavy fabrics is expected. Job Type & Location This is a Contract to Hire position based out of Secaucus, NJ. Pay and Benefits The pay range for this position is $17.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionShipping Clerk Urgently Needed for Food Manufacturing Company in Newark, NJ Urgently Hiring, can interview and start within the same week! Shift: 7am-3:30pm (Monday-Friday) Pay: $22-$23/hour ; Overtime: $33-$34.50/hour Location: Newark, New Jersey Job Description: • Provide training for all shipping personnel including job procedures, paperwork, inventory, safety, and GMPs. Verify accuracy of all data entry and paperwork turned in by the warehouse team., • Provide input and feedback into the employee schedule., • Execute against the schedule, calling in drivers and dispatchers or reducing hours as required., • Organize people and equipment to maximize warehouse productivity., • Input on annual employee evaluations., • Identify potential for growth and training and improve on performance deficiencies., • Participate in disciplinary action proceedings where needed., • Ensure the proper training and safe utilization of all shipping personnel, equipment, including the forklift, electric and manual pallet jacks., • Monitor physical inventory to ensure orders fulfillment, • Communicate order shortage to customer service, • Order material from supplies, • Utilize Batchmaster to record inventory movement., • Perform weekly physical inventory of all finished goods, • Maintain orderliness of material storage areas, • Maintain stock rotation, • Record lot numbers for traceability, • Clean and inspect stock to prevent infestation, • Ensure proper receiving guidelines are followed., • Monitor storage conditions for proper temperatures Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Food/ Snack Manufacturing Company Urgently Hiring Machine Operators to Start Within Same Week of Applying Overnight Shifts Available! Location: Totowa, NJ 3rd Shift: 12:00am-8:30am (Monday-Friday) Pay: $20-$22/hour ; Overtime: $30-$33/hour (A lot of Overtime Available) Job Description As a Cleanroom Technician, you will play a crucial role in the production process by operating machinery for ingredient intake and staging, verifying the correct use of ingredients and labels, and performing visual inspections on incoming raw materials. Your focus will be on supporting quality control checks during receiving activities and ensuring materials adhere to QA quarantine or release procedures. Responsibilities • Operate and monitor equipment supporting ingredient intake., • Verify ingredient identity, lot numbers, and labels prior to use., • Inspect raw materials for damage, contamination, or quality deviations., • Stage materials according to QA hold or release status., • Follow SOPs, GMPs, and food-safety requirements., • Communicate material issues to QA or supervision., • Support food-safety and traceability requirements without record ownership., • Monitor equipment performance and report issues., • Follow sanitation, hygiene, and safety requirements., • Assist with equipment cleaning during line changeovers., • GMP environment experience., • Cleanroom expertise., • Production and food manufacturing knowledge., • Materials handling and inspection skills., • Operate and monitor equipment proficiency., • Ability to stand for extended periods., • 6 months to 1 year manufacturing or food production experience., • Familiarity with GMPs and SOPs. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Field Service Technician Job Description The Field Service Technician travels daily to customer sites across New England to evaluate, maintain, and repair pumps and related equipment. This role combines hands-on mechanical work in the field and in the shop with accurate documentation in a CRM system, all performed with a strong focus on safety and customer service. Responsibilities • Travel daily to customer locations to evaluate the condition and performance of pumps and related equipment., • Diagnose mechanical, hydraulic, pneumatic, and electrical issues with pump systems using troubleshooting techniques, schematics, and blueprints., • Perform maintenance and repair of pumps and related equipment at customer sites, ensuring reliable and efficient operation., • Provide support for pump start-ups, including setting up and adjusting pump operational programs to meet customer requirements., • Utilize a CRM system to promptly and accurately complete service reports, documenting work performed, parts used, and recommendations., • Evaluate pump products in the shop, including disassembly and inspection, and prepare detailed evaluations and repair estimates., • Perform complete pump product repairs in the shop, from component replacement to reassembly and testing., • Participate in a rotating on-call schedule to provide after-hours field service support as needed., • Use and maintain basic hand and power tools safely and effectively during all service activities., • Follow all safety procedures and guidelines, completing every task with safety as a top priority., • Communicate clearly with internal teams and customers about findings, repair options, and next steps., • Strong mechanical aptitude with hands-on experience working on industrial equipment or similar machinery., • Proficiency in troubleshooting mechanical, pneumatic, hydraulic, and basic electrical issues., • Ability to read and interpret blueprints and schematics for pumps and related systems., • Experience performing field service work, including on-site maintenance and repair., • Competence in preventive maintenance practices for industrial equipment., • Ability to use and maintain basic hand and power tools safely and effectively., • Comfort working with a CRM or similar system to complete service reports and documentation., • Valid driver’s license with a clean driving record to support daily regional travel., • Strong attention to detail and commitment to safety in all work activities., • OSHA 10 certification., • Pump technician, field service technician, or similar industrial service role., • Experience with pump systems, including installation, start-up, and repair, is highly beneficial., • Familiarity with production and industrial environments., • Ability to work independently in the field and manage time and travel efficiently. You will join a leading organization in the pump industry that provides the tools and support you need to succeed, including the use of a dedicated service van for field work. The company emphasizes long-term career growth and offers clear opportunities to advance within the department. You will work in a culture that values safety, professionalism, and continuous learning, giving you the chance to build a stable, rewarding career while expanding your technical skills. Work Environment This role is primarily field-based, with daily travel throughout New England to industrial customer sites, as well as time spent in the shop for evaluations and repairs. You will work in industrial environments around pumps and related equipment, using basic hand and power tools and standard diagnostic equipment. The position requires flexibility to travel regularly and to participate in a rotating on-call schedule for after-hours support. Work conditions may include noisy areas, moving machinery, and varying site conditions, where adherence to safety procedures and appropriate work attire, including personal protective equipment, is essential. Job Type & Location This is a Permanent position based out of Newark, NJ. Pay and Benefits The pay range for this position is $68000.00 - $83000.00/yr. Permanent role / company service van Workplace Type This is a fully onsite position in Newark,NJ. Application Deadline This position is anticipated to close on May 21, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Construction Force Services is seeking a skilled and reliable General Laborer to join our team for a 3-week assignment.The ideal candidate will have experience in general labor tasks and be comfortable working with and around heavy equipment.Proven experience in general labor.OSHA 10 certification (

Job Description IMMEDIATE ELECTRONIC ASSEMBLERS AVAILABLE! ($18-20/HR) Large company with opportunity for growth looking for ELECTRONIC ASSEMBLERS to join their team. Pay: $18-20/HR Location: Clifton, NJ Shift: 7am-3:30pm or 3pm-11:30pm Monday-Friday *Must be open to working overtime on weekends when needed Job Description: • Experience with crimping, stripping, and connecting wires and cables -Utilizing hand tools and doing bench work -Ability to follow diagrams or schematics -Minor Soldering *Position is a fulltime and permanent role *Company has great benefits and 401k plan *You can start work immediately as there is no interview PLEASE APPLY IMMEDIATELY TO BE CONSIDERED FOR THIS ROLE! Job Type & Location This is a Permanent position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $17.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Vacuum Manufacturing Company Urgently Hiring 1st Assemblers to Interview and Start Within the Same Week for Career Opportunity in Rutherford, NJ! Pay: $21.22/hour ; Overtime: $31.50/hour Location: Rutherford, NJ Shift: 6am-4:30pm (Monday-Thursday) ; Optional Overtime on Fridays & Saturdays Job Description Join our team as a Mechanical Assembler where you will engage in the assembly of commercial vacuums, utilizing your skills in mechanical assembly and hand tools. You will work at your own bench or on an assembly line, focusing on tasks such as wire stripping and basic mechanical assembly. Responsibilities • Assemble commercial vacuums, focusing on wire stripping and basic mechanical assembly., • Utilize hand and power tools such as wrenches and drills effectively., • Follow production blueprints and ensure mechanical accuracy., • Minimum of 6 months experience in a manufacturing environment., • Proficiency in using hand and power tools., • Ability to work with minimal supervision. This is a Contract to Hire position based out of Rutherford, NJ. Pay and Benefits The pay range for this position is $21.22 - $22.28/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description IMMEDIATE ELECTRICAL ASSEMBLERS AVAILABLE! ($21-23/HR) Large company with opportunity for growth looking for ELECTRICAL ASSEMBLERS to join their team. Pay: $21-23/HR Location: Rutherford, NJ Shift: 6am-4:30pm Monday-Thursday & Overtime on Friday *Must be open to working overtime on weekends when needed Job Description: • Experience with crimping, stripping, and connecting wires and cables -Assembling pumps, blowers, and motors -Utilizing hand tools and doing bench work -Ability to follow diagrams or schematics -Minor Soldering *Position is a fulltime and permanent role *Company has great benefits and 401k plan *You can start work immediately as there is no interview PLEASE APPLY IMMEDIATELY TO BE CONSIDERED FOR THIS ROLE! Job Type & Location This is a Permanent position based out of Rutherford, NJ. Pay and Benefits The pay range for this position is $20.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Overview Why Aerotek? Aerotek is an operating company within Allegis Group, a global leader in talent solutions. We are a privately held organization with over 200+ offices nationwide. We work with 95% of Fortune 500 companies and specialize in staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. Working at Aerotek and why you will love it... At Aerotek, we prioritize inclusivity and foster a magnetic work environment that empowers our employees to achieve both personal and professional aspirations. By putting the people first, our corporate culture encourages employee engagement and enhances performance through comprehensive training and a positive culture. We promote exclusively from within. The SalesDevelopment Representativeis responsible for learning the fundamentals of recruiting and the fundamentals of sales, including prospecting, client engagement, req qualification and delivery.The Sales Development Rep is responsible for learning and executing on all steps associated with the sales process.The SalesDevelopment Representativemust identify target accounts in defined territory and make cold calls to set meeting at perspective targets.This entry-level sales role is designed for individuals eager to learn the full sales cycle, with a clear path toward becoming an Account Manager.The SDR will work closely with the Delivery and Sales teams to build client relationships, generate leads, and support revenue growth initiatives. * Utilize the Aerotek 7 stages of the SOLVE model to target, engage and service new and existing clients * Increase sales and market share through assigned and newly generated accounts * Research and build call sheets using tools like LinkedIn and Connected. * Identify, develop and manage new and existing customer relationships by leveraging resources for lead generation * Complete Aerotek Account Manager Onboarding training * Generate leads, set and attend meetings with defined in territory * Maximize profitability by effectively negotiating bill rates and terms; ensure that direct labor rates are in line with market standards * Build and maintain relationships within accounts by providing quality contractors; proactively market resumes of ideal candidates * Perform sales related activities including, but not limited to attending meetings at client sites and client manager, and contractor lunches * Communicate account knowledge to team members (recruiters, FOA, sales, Director) through "req meetings" and Red Zone meetings * Collaborate with Account Managers and Directors to support territory planning and workforce strategy. * Generate, document and track all leads generated and perform outreach to targeted customers Let's talk money and perks! Upon successful completion of our salary equivalent hourly training period (hourly training period for 24 weeks), Aerotek offers a base salary of $70,000 with unlimited earning potential through weekly commission, monthly car allowance , cell phone reimbursement and other performance-based incentives. Projected Sales Earnings: * Training Year: $70,000 * First full Year 1: $90,000 * Second full Year: $131,000 Additional benefits include : * $425 Car Allowance after training period * up to $100 cell phone reimbursement after training period * Medical, dental and vision * HSA & 401k account * 20 days of paid time off as well as paid holidays * Parental/Family leave * Employee discounts * Employee-led resource groups Performance based incentives : * Quarterly bonuses * All-expense paid trip * Company funded investment plan Qualifications: Sales Degree/ Certification or 1-2 years of sales experience (sales internship, sales competitions encouraged) Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors Connect With Us! () Cookie Notice () Cookie Settings Privacy Notices () CA Notice at Collection CA Notice at Collection (for Employees and Job Applicants) () Your Privacy Choices Our People Are Everything. Aerotek Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 14,000 clients each year. Aerotek is an operating company within Allegis Group, a global leader in talent solutions. To learn more, visit: Aerotek.com . The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please call 888-237-6835 or email for other accommodation options. However, if you have questions about this position, please contact the Recruiter located at the bottom of the job posting. The Recruiter is the sole point of contact for questions about this position. Job ID 2026-13402 Category Sales Min USD $700,000.00/Yr Max USD $700,000.00/Yr Location : Location US-NJ-Rutherford

Aerotek - - Responsibilities: Perform a wide range of construction labor tasks on active job sites; Handle heavy lifting of materials, tools, and equipment throughout the workday; Work in all weather conditions including extreme heat, cold, rain, and snow; Operate and assist with power washing of h

Job DescriptionJob Title: Data Center TechnicianJob Summary: The Data Center Technician is responsible for the installation, maintenance, and support of IT and network infrastructure within a data center environment. This role supports daily operations by performing hardware installations, break/fix troubleshooting, cabling, and equipment decommissioning while adhering to strict safety, security, and operational procedures. Key Responsibilities • Install, rack, stack, and cable servers, network devices, and related equipment, • Perform hardware break/fix, diagnostics, and component replacement, • Run, label, and manage fiber optic and copper cabling, • Assist with equipment deployment, upgrades, and decommissioning activities, • Perform basic network troubleshooting and connectivity checks, • Transport and stage equipment within the data center as needed, • Follow all data center work rules, change management processes, and security protocols, • Adhere to environmental health and safety (EHS) standards at all times, • Accurately document work performed and update tickets or logs as required, • Escalate issues appropriately and coordinate with team members or leadsRequired Qualifications, • High school diploma or equivalent, • Experience in a data center, • Hands-on experience with hardware installation or IT equipment, • Familiarity with structured cabling, rack layouts, and data center tools, • Ability to follow detailed procedures and work in a controlled environment 401K, Health Benefits including medical, dental, and vision Workplace Type This is a fully onsite position in Totowa,NJ. Application Deadline This position is anticipated to close on May 20, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description POSITION SUMMARY: Remington & Vernick Engineers is looking for a NICET IV/Resident Engineer Certified Professional with expertise of managing heavy highway / bridge construction projects, and a construction inspection team. This professional will be responsible for the project record keeping, correspondence, compiling, reviewing, and delivery of required daily inspection reports. The ideal candidate will chair various project meetings, record and prepare and distribute accurate meeting minutes. This individual will need to be well experienced in bridges, highways and have an extensive background in construction especially with clients such as NJDOT, the NJTA, DRPA, and DRJTBC. PRIMARY DUTIES: • Act in the capacity of Resident Engineer, providing extensive inspection and management of construction project and serve as the Client’s liaison with the Contractor. The RE shall be capable of managing a 3+ CM/CI staff, possess strong communication, computer, and writing skills and be experienced with CPM Scheduling, • Work collaboratively with other engineers, professionals, and infrastructure authorities on Federal, State, regional, and local improvement projects., • Conduct construction supervision and field inspection of the work in progress to determine if the work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Work with client to inform public about upcoming work and potential impacts. Work with the contractor to minimize disruptions to the public., • Provide and maintain all records related to the project in question including daily quantities., • Manage all project submittals and requests for information, ensuring the proper Engineer performs the necessary review and/or guidance., • Keep a logbook of all observations and daily activities for ongoing work and provide the client with daily reports to include all labor trades, equipment supplied by Contractor, and measured pay quantities., • Review applications for payment with Contractor and make recommendations for progress payments to the Client., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Good communication skills, with the ability to work with others and the public., • Self-motivated, organized, and focused, with good attention to detail. EDUCATION/EXPERIENCE: • High School diploma or equivalent, • Bachelor’s degree in civil engineering or construction management, • Minimum of 8 years of experience with 3+ years of experience on projects $10M or greater, • Experienced on bridge, and highway construction projects, • Must be familiar with NJDOT specifications and documentation practices., • Possess a combination of NJDOT, NJTA, DPRA, and DRJTBC experience CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • Licensed professional engineer or NICET 4 Highway Construction Inspection required, • ACI-Concrete Field Testing Technician, • NJSAT Asphalt Paving Construction Technologist, • Rutgers TCC certification SUPERVISORY RESPONSIBILITY This position has supervisory responsibility. The RE shall be capable of managing a 3+ CM/CI staff PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee works primarily in the field and may be exposed to outside weather conditions. Work requires full range of motion and ambulation, climbing ladders or crawling in tight spaces. Requires technology and computer use to file project, time, and expense reports. May occasionally require lifting up to 25 pounds. Travel to worksites and regional offices worksites will be required. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $94,000 - $122,200. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. We are an at will employer. #LI-KS1

Job Description IMMEDIATE WELDER HELPER POSITION AVAILABLE! ($17-18/HR) Large company with opportunity for growth looking for WELDER HELPERS to join their team. Pay: $17-18/HR Location: Boonton, NJ Shift: 6:30am-3pm Monday-Friday Must be open to working on weekends when needed Job Description: • Must have 1-2 years of experience with TIG welding or fabrication -Experience using a hand grinder or buffer -Ability to use hand and power tools -Assembling products *Position is a fulltime and permanent role *Company has great benefits and 401k plan *You can start work immediately as there is no interview PLEASE APPLY IMMEDIATELY TO BE CONSIDERED FOR THIS ROLE!! Job Type & Location This is a Permanent position based out of Wayne, NJ. Pay and Benefits The pay range for this position is $17.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionSalary: 150,000-225,000 Company Overview Montana Construction Inc. is a family-owned and operated heavy construction company specializing in sewer, water, bridge, and emergency services for municipalities, utility authorities, and private entities across New Jersey, New York, and Pennsylvania. We pride ourselves on providing efficient, dependable, and quality service to every client. As we continue to grow, we seek experienced leaders who share our commitment to excellence and bring the expertise to help us deliver outstanding results on every project. Job Summary Montana Construction Inc. is seeking an experienced and strategic Senior Director of Estimating to lead our Estimating department and ensure the highest standards of accuracy, competitiveness, and profitability across all bids and proposals. This Candidate will manage the full estimating team, oversee the preconstruction process for utility construction projects, and serve as a key contributor to the companys business development and project execution strategy. This role requires deep expertise in utility construction estimating, strong leadership capabilities, and the ability to build and maintain lasting relationships with clients, subcontractors, and vendors. Key Responsibilities Team Leadership & Management • Lead, manage, and mentor the estimating team, assigning responsibilities on each project and fostering a culture of accountability, collaboration, and continuous improvement., • Establish annual performance goals for each direct report, conduct timely performance evaluations, and coach staff to deliver superior results., • Forecast staffing needs and manage department workload to ensure timely and accurate bid submissions., • Oversee the preparation of all estimates, bid packages, and proposals, ensuring accuracy and on-time delivery., • Review plans, specifications, and project data to determine material, labor, and subcontractor costs., • Prepare conceptual budgets based on minimal project information during early preconstruction phases., • Solicit and evaluate pricing from subcontractors and suppliers; review and manage scoping of specialty contractor bids., • Conduct constructability reviews and participate in site inspections to assess conditions that may affect subcontractor pricing or project execution., • Work closely with senior leadership to develop and execute a strategic plan for the estimating function, including growth strategies, market focus, and people development., • Develop a comprehensive understanding of each projects strategy and deploy it throughout the estimating and project setup process to ensure profitability and client satisfaction., • Stay current with industry trends, market conditions, and regulatory changes to ensure bids remain competitive and compliant., • Develop and maintain strong relationships with clients, vendors, and subcontractors at the appropriate level, reinforcing the companys commitment to quality and responsiveness., • Provide sales support for presentations to owners, municipalities, utility authorities, and other stakeholders., • Lead the transfer of estimating information on successful project awards, including participation in job kickoff meetings., • Collaborate with project managers and operations teams to resolve problems and provide estimating support during the construction process., • Guide multiple projects and project teams simultaneously through the preconstruction and estimating phase., • Perform additional duties and special projects as assigned by senior leadership. Required Qualifications • Bachelors degree in Civil Engineering, Construction Management, Business Administration, or a related field; or 20+ years of directly relevant estimating experience in lieu of degree., • Minimum of 20 years of experience in utility construction estimating, with demonstrated expertise in sewer, water, and bridge construction., • Minimum of 5 years of experience managing or leading an estimating team., • Extensive knowledge of utility construction methods, materials, and labor costs specific to NJ, NY, and PA markets., • Proven experience with competitive bidding, conceptual estimating, and government/municipal contract requirements., • Ability to read and interpret construction drawings, blueprints, and technical specifications., • Proficiency in Microsoft Office Suite and construction estimating software (e.g., Timberline, OST, or similar platforms)., • Excellent written and verbal communication skills with strong presentation abilities., • Competitive salary commensurate with experience and qualifications., • Comprehensive health, dental, and vision insurance plans., • 401(k) plan with company matching contributions., • Generous paid time off (PTO) and paid holidays., • Vehicle allowance or company vehicle for site visits and client travel.

Job Description Maitra Associates, P.C. (Maitra), an established multi-disciplined engineering design and construction management firm serving the needs of various clients in the transportation, institutional, and facilities markets, seeks experienced Civil Engineers with 4-6 years of experience for its growing land development group. Projects will include roads, underground utilities, public buildings, recreational facilities, and land use applications. You will participate in the design of various infrastructure projects for the public sector- municipalities, state agencies, and local school districts- and the private sector, both commercial and residential, and report directly to the Project Manager. Duties: • Engage in valuable interactions with external clients, • Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data., • Assist in preparing construction documents, including drawings and specifications for site layout, grading, drainage, utilities, soil erosion, sediment control, and landscaping., • Estimate quantities and materials, equipment, or labor costs to determine project feasibility., • Assist in stormwater management design., • Perform construction support services, including providing timely data, shop drawing review, and client coordination., • A supportive and flexible work environment that empowers employees to stay healthy, fulfill their passions, and balance work and life goals., • The opportunity to advance your career., • A Learning & Development department that facilitates ongoing soft and technical skills training, • Complete visibility and exposure to all aspects of a project, • Open and transparent communication with senior leadership as well as local office management., • Bachelor’s degree in civil engineering or related field, • Professional Engineer's License, • The ability to learn quickly, strong communication skills, and a solid work ethic, • A passion for design and creative problem-solving, • Familiarity with government rules and regulations for stormwater management design, • Practical experience with civil engineering software (AutoCAD Civil3D)Company DescriptionMaitra Associates, P.C. (Maitra) is an established multi-discipline engineering design and construction management firm serving the needs of various clients in the transportation, institutional, and facilities markets. Since our founding in 1982, Maitra has grown from a two-person office to a regional firm headquartered in Bedminster, New Jersey and with offices in New York. We aim to award, manage, and complete projects in the Northeast and Mid- Atlantic Regions. Maitra offers professional services in several disciplines, including civil/site engineering, electrical engineering, mechanical engineering, and construction management and inspection. The firm’s diverse staff comprises experienced professionals who provide client-focused, technically superior, cost-effective engineering and construction inspection services within an interdisciplinary team environment. Maitra is entrepreneurial in spirit, reflecting a culture of flexibility, innovation, and responsiveness while providing the in-depth resources of a full-service organization.Maitra Associates, P.C. (Maitra) is an established multi-discipline engineering design and construction management firm serving the needs of various clients in the transportation, institutional, and facilities markets. Since our founding in 1982, Maitra has grown from a two-person office to a regional firm headquartered in Bedminster, New Jersey and with offices in New York. \r\n\r\nWe aim to award, manage, and complete projects in the Northeast and Mid- Atlantic Regions. Maitra offers professional services in several disciplines, including civil/site engineering, electrical engineering, mechanical engineering, and construction management and inspection. \r\n\r\nThe firm’s diverse staff comprises experienced professionals who provide client-focused, technically superior, cost-effective engineering and construction inspection services within an interdisciplinary team environment. Maitra is entrepreneurial in spirit, reflecting a culture of flexibility, innovation, and responsiveness while providing the in-depth resources of a full-service organization.

Job Description Essential Job Functions: General: · Comprehend plans and specifications to perform accurate take offs · Analyze blueprints and specifications to help estimating department determine labor and material costs · Review proposal specifications and drawings to determine work scope with estimators · Consult with internal stakeholders and team · Solicit subcontractor and vendor requests for pricing for the estimating department · Receive and incorporate revisions and addendums into project documents · Attend internal scope review meetings · Participate in meeting for project handover to field personnel · Upload Proposal Letters for estimating department within Company systems · Enter Job Information in Accubid, Building Connected and Estimating Folder · Input estimators notes into Sales Card Cash Flow Analysis · Assemble Job Folders for bid documents for estimating and operations Requirements: General: · Strong analytical skills · Exceptional organizational skills and attention to detail · Proficient in Microsoft Office (Outlook, Word & Excel) · Competency in understanding and explaining take-off sheets for estimating · Excellent customer orientation and service skills · Strong written and oral communication skills · A team player that works effectively with internal stakeholders. Essential Physical Abilities · Able to navigate NJ office buildings and construction sites · Access typical office equipment, access file cabinets · Ability to locate and report to various remote projects sites Education/Experience Required: · 1 year experience in estimating · Proficiency in the use of computers, Microsoft Office Suite, Portable Document Formats (PDF) software, project management software. · Undergradute in Science, Engineering or Engineering Technology ABET curriculum Working Environment · Construction Rooms · Normal Office Environment · Frequently communicates with employees and customers verbally and in writing · Ability to work during weekdays M-F (8am-5pm) Company DescriptionAbout Unity Electric LLC.: Unity Electric, a full service IBEW electrical contractor, is dedicated to providing integrated, comprehensive service to its clients, including design, installation and maintenance of complex electrical, telecommunications, life safety, security systems, audio-visual, mechanical systems, and Information Technology projects and staffing. Unity is headquartered in New York, with offices in New Jersey, as well as operations throughout the U.S. About Equans: Equans, a Bouygues group company, is the world leader in multi-technical services with offices in 20 country hubs. We design and provide customized solutions to improve our customers’ buildings, technical equipment, systems and processes and to support them in optimizing their use. With nearly 90,000 highly qualified employees and a strong geographic footprint through our historical local brands, we have excellent technical know-how in design, installation, maintenance and performance services, with a unique combination of skills as in HVAC, Cooling & Fire protection, Facility Management, Digital & ICT, Electrical, Mechanical & Robotics. Equans expertise and knowledge of our customers’ businesses now place us to support them in their transitions for modernization and sustainable development.About Unity Electric LLC.:\r\nUnity Electric, a full service IBEW electrical contractor, is dedicated to providing integrated, comprehensive service to its clients, including design, installation and maintenance of complex electrical, telecommunications, life safety, security systems, audio-visual, mechanical systems, and Information Technology projects and staffing. Unity is headquartered in New York, with offices in New Jersey, as well as operations throughout the U.S. \r\n \r\nAbout Equans:\r\nEquans, a Bouygues group company, is the world leader in multi-technical services with offices in 20 country hubs. We design and provide customized solutions to improve our customers’ buildings, technical equipment, systems and processes and to support them in optimizing their use. With nearly 90,000 highly qualified employees and a strong geographic footprint through our historical local brands, we have excellent technical know-how in design, installation, maintenance and performance services, with a unique combination of skills as in HVAC, Cooling & Fire protection, Facility Management, Digital & ICT, Electrical, Mechanical & Robotics. Equans expertise and knowledge of our customers’ businesses now place us to support them in their transitions for modernization and sustainable development.

Job DescriptionSuperintendent Construction Superintendent - Multi-Family/Residential Position Overview We are seeking an experienced Construction Superintendent to lead field operations for multi-family residential projects, including podium, high-rise, mid-rise, and stick-frame buildings. The Superintendent will be responsible for day-to-day jobsite management, safety, schedule and quality control, subcontractor coordination, and communication with project stakeholders to deliver projects on time, on budget, and to specification. Key Responsibilities • Oversee daily field operations across multi-family residential projects (podium, high-rise, mid-rise, stick-frame), ensuring work is performed safely, efficiently, and to quality standards., • Develop, maintain, and drive the construction schedule; coordinate trades and adjust sequencing to meet milestones and minimize delays., • Manage and supervise subcontractors and on-site labor, ensuring scope compliance, productivity, and proper workmanship., • Enforce site safety programs and OSHA requirements; conduct regular safety meetings, inspections, and corrective actions to maintain a safe jobsite., • Perform quality inspections at each phase of construction; enforce installation standards and resolve quality issues promptly., • Coordinate material deliveries, storage, and on-site logistics to support uninterrupted workflow and protect materials from damage., • Track field progress, prepare daily reports, and communicate status updates, risks, and recovery plans to Project Managers and stakeholders., • Review plans, submittals, RFIs, and change orders in the field; ensure work aligns with contract documents and coordinate timely resolution of design/constructability issues., • Assist with cost control by identifying inefficiencies, tracking jobsite labor and productivity, and supporting change order documentation., • Mentor and develop on-site personnel; promote teamwork, clear communication, and a culture of continuous improvement.Qualifications, • Minimum 5+ years of Superintendent experience on residential and multi-family projects; direct experience with podium, high-rise, mid-rise, and stick-frame construction preferred., • Proven track record delivering projects on schedule and within budget, with strong references from general contractors or owners., • Strong knowledge of construction methods, means and methods for multi-family/residential construction, and familiarity with local building codes and inspections., • Ability to read and interpret construction drawings, specifications, submittals, and shop drawings., • OSHA 30-hour certification (or equivalent) and demonstrated commitment to jobsite safety., • Excellent leadership, communication, and conflict-resolution skills; ability to coordinate multiple trades and stakeholders., • Proficient with construction management software (e.g., Procore, Bluebeam, PlanGrid) and Microsoft Office suite., • Working knowledge of quality control processes and experience conducting punch lists and closeout procedures., • Valid drivers license and reliable transportation; willingness to work flexible hours and travel to multiple job sites as required., • Construction-related degree, technical diploma, or trade certification is preferred but not required. - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 04/30/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.Everforth CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. Everforth CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. Everforth CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Job Title: Civil Construction Estimator (Earthwork Specialist) Location: Carlstadt, NJ Our client, a well-established civil construction company, is seeking a highly skilled Civil Construction Estimator with a strong background in civil engineering and expertise in earthwork. The ideal candidate will have 5+ years of experience in estimating for civil construction projects and a keen ability to assess project requirements, analyze plans, and prepare accurate cost estimates. Key Responsibilities Analyze project specifications, drawings, and other documentation to prepare detailed and accurate cost estimates for earthwork and related civil construction projects. • Conduct site visits as necessary to evaluate conditions and identify potential project challenges., • Collaborate with project managers, engineers, and other stakeholders to ensure estimates align with project goals and budgetary constraints., • Evaluate subcontractor and vendor proposals, conducting bid comparisons and negotiations as needed., • Prepare comprehensive bid packages, including take-offs, scope definitions, and pricing summaries., • Stay updated on industry trends, labor costs, material prices, and local regulations that could impact estimates., • Utilize estimating software and tools to enhance efficiency and accuracy., • Participate in pre-construction meetings, presenting estimates and addressing client or team inquiries., • Support the development of value engineering options and alternatives to optimize project costs. Qualifications • Bachelor’s degree in Civil Engineering or a related field., • Minimum of 5 years of experience as a Civil Construction Estimator, with a specialization in earthwork., • In-depth knowledge of earthwork processes, including grading, excavation, site preparation, and utility installation., • Strong analytical skills with the ability to interpret engineering drawings and specifications., • Proficiency in estimating software (e.g., HCSS, Bluebeam) and Microsoft Office Suite., • Excellent communication and negotiation skills, with a detail-oriented mindset., • Ability to manage multiple projects and deadlines in a fast-paced environment., • Knowledge of construction codes, regulations, and safety standards applicable in New Jersey. Location The position is based in Carlstadt, NJ, with occasional travel to project sites in the region. EQUAL EMPLOYMENT OPPORTUNITIES NorthPoint Staffing, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Traffic Systems Sales Estimator Company: Intelligent Traffic Supply Products, LLC (ITS) Location: South Plainfield, NJ Industry: Intelligent Transportation Systems (ITS) & Infrastructure We are currently seeking a Traffic Systems Sales Estimator to join our team. In this role, you will analyze intersection construction plans and respond to RFQs to secure the sale of products. Utilize your skills in plan/schematics interpretation, mathematical calculations and data management to define job scopes, detail job requirements, and delivery results to customers. Our team will provide comprehensive training on transportation systems and signal equipment. If you thrive in a collaborative environment, have a keen eye for detail, and are excited to learn and grow within a new industry, this is the role for you! Apply today to be part of a company where your estimating expertise makes a real impact! Key Responsibilities: • Research and respond to public bid opportunities for upcoming government jobs, • Receive and respond to requests for quotes from contractors and municipalities, • Research contracts, job specifications and schematic drawings; prepare quantity and pricing take-offs of material and labor needed for job/order delivery, • Document all calculations and analysis used in estimates, • Work with Purchasing to secure material pricing and ensure material compliance, • Revise/requote documentation to reflect changes in plans and scope of work, • Obtain material approvals from municipal project owners, • Monitor overall sales results to evaluate ROI for orders delivered, • Understand customers’ business and technical requirements; establish relationships with direct decision-makers and their staff, • Work with internal Project Coordinator, Production, Purchasing and Technical staff to support pre- and post-production activities Qualifications • Bachelor’s Degree in Manufacturing, Construction Management, Accounting, Engineering or a related field, • 3+ years estimating or engineering experience in construction or manufacturing, • 2+ years successful experience in a business-to-business or business-to-government sales model, • Proficient knowledge of sales estimation and pricing strategies, • Ability to read and interpret specifications and trade drawings, • Expert knowledge Microsoft Excel and electronic file management, • Superb math skills, • Strong customer relationship management, • Ability to organize and utilize large amounts of data, • Ethical judgement and decision-making Company DescriptionIntelligent Traffic Supply Products, LLC Intelligent Traffic Supply Products, LLC (ITSP) is the leading specialized provider for modernizing New Jersey's roadways. We don't just supply traffic equipment—we engineer and deliver the precision components that form the backbone of Intelligent Transportation Systems (ITS) across the state. We specialize in the expert assembly and distribution of custom-built, high-specification traffic control solutions for a rapidly expanding base of municipal clients. Our comprehensive suite of products is crucial for building safer, smarter, and more efficient urban environments. It includes: Advanced Control Systems: Cubic ITS signal controllers and sophisticated system communications equipment. Infrastructure Components: Traffic signal assemblies, durable traffic poles, and assorted hardware and software. Detection & Safety: Cutting-edge pedestrian and vehicle detection technology, and complete pedestrian crosswalk systems. At ITSP, we are dedicated to building the future of New Jersey's traffic flow, one smart solution at a time.Intelligent Traffic Supply Products, LLC\r\n\r\nIntelligent Traffic Supply Products, LLC (ITSP) is the leading specialized provider for modernizing New Jersey's roadways.\r\n\r\nWe don't just supply traffic equipment—we engineer and deliver the precision components that form the backbone of Intelligent Transportation Systems (ITS) across the state. We specialize in the expert assembly and distribution of custom-built, high-specification traffic control solutions for a rapidly expanding base of municipal clients.\r\n\r\nOur comprehensive suite of products is crucial for building safer, smarter, and more efficient urban environments. It includes:\r\n\r\nAdvanced Control Systems: Cubic ITS signal controllers and sophisticated system communications equipment.\r\nInfrastructure Components: Traffic signal assemblies, durable traffic poles, and assorted hardware and software.\r\nDetection & Safety: Cutting-edge pedestrian and vehicle detection technology, and complete pedestrian crosswalk systems.\r\n\r\nAt ITSP, we are dedicated to building the future of New Jersey's traffic flow, one smart solution at a time.

Job DescriptionSalary: $700-$1,100 Gutter Cleaner (Full-Time) Fairfield, NJ Neds Home, a 2025 USA Today Top Workplace, is hiring full-time Gutter Cleaners in Fairfield, NJ. No experience requiredwe provide paid training! Founded in 1965, Neds Home has grown into the worlds largest gutter cleaning companywhile still maintaining the traditional values we were built on. We treat every customer as if they were our only customer. Schedule: MonSat, 6:30 AM 4:00 PM (No nights) Responsibilities: • Perform gutter cleaning, repair, and installation on residential homes and commercial buildings (up to three stories), • Travel to job sites daily with your team and return before the end of the workday, • Follow all safety procedures using our patented, OSHA-approved safety system, • Deliver excellent customer service on every job What Were Looking For: • Positive attitude and strong work ethic, • Comfortable working outdoors, • Paid training, • Team-oriented environment, • Growth opportunities

Job Description Senior Civil Estimator – Heavy Civil Construction Location: Fairfield, NJ (Northern New Jersey Projects) Company: Our client – a well-established heavy civil contractor Salary: $150,000 – $200,000 (commensurate with experience) Overview Our client, a highly reputable heavy civil contractor based in Northern New Jersey, is seeking a Senior Civil Estimator to join their growing team. This firm specializes in complex heavy highway, earthwork, and infrastructure projects, delivering high-quality results across municipal, state, union, and private-sector work throughout NJ. They are looking for a top-tier estimator—someone who can take full ownership of the bid process and consistently produce competitive, winning lump sum bids. About the Company This contractor is recognized throughout New Jersey for delivering challenging civil projects with precision, professionalism, and a commitment to on-time, on-budget performance. Project experience includes: • Heavy Highway Construction: roadwork, bridges, reinforced concrete structures, grading, paving, drainage, and infrastructure, • Site Work / Heavy Earthwork: clearing, mass excavation, utilities, concrete, hardscape, and site improvements, • Utility Infrastructure: water, storm, sewer, and underground services, • Transportation & Infrastructure: roads, bridges, tunnels, and large-scale public works They are known for strong planning, reliable execution, and a collaborative, performance-driven culture. Key Responsibilities • Lead the full estimating lifecycle from bid review through final submission, • Prepare and manage lump sum bids for heavy civil and infrastructure projects, • Interpret and analyze engineering drawings, specifications, and bid documents, • Perform detailed quantity takeoffs (earthwork, utilities, concrete, paving, drainage, structures), • Develop complete project cost structures including labor (union), equipment, materials, subcontractors, and indirect costs, • Solicit and evaluate subcontractor and vendor pricing; build strong industry relationships, • Evaluate project risks, constructability, and schedule impacts, • Collaborate closely with project management, operations, and field teams, • Participate in pre-bid meetings, site visits, and client discussions, • Prepare final bid proposals, scopes, clarifications, and presentations, • Contribute to value engineering and bid strategy discussions, • Stay current with NJDOT standards, union requirements, and regional market pricing Qualifications • 10+ years of estimating experience with a heavy civil contractor, • Strong background in heavy highway, site development, utility infrastructure, and earthwork, • Proven experience managing and delivering lump sum bids, • Experience working on union projects and understanding labor structures, • Deep knowledge of NJDOT, municipal standards, and NJ-based construction requirements, • Expert-level knowledge of grading, drainage, concrete structures, roadway construction, and utilities, • Proficiency in estimating software, digital takeoff tools, and advanced Excel skills, • Ability to read and interpret complex civil engineering plans and specifications, • Strong negotiation, analytical, and communication skills, • High level of accuracy and ability to manage multiple bids simultaneously, • Proven track record of preparing competitive, winning bids What They’re Looking For • A true “go-to” estimator—someone who owns the number and stands behind it, • A high performer who thrives in a deadline-driven, competitive bid environment, • Someone who understands field execution, not just estimating theory, • A team-oriented professional with strong subcontractor and vendor relationships Compensation & Benefits • Base salary: $150K – $200K (based on experience and performance), • Comprehensive benefits package (medical, dental, vision), • 401(k) with company contribution, • Paid time off, holidays, and sick leave, • Long-term growth opportunity with a respected NJ-based contractor Equal Employment Opportunity NorthPoint Staffing, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age,

Job Description POSITION SUMMARY: RVE is seeking a water / wastewater inspector with experience in the field of water and sewer construction. The ideal candidate should be familiar with gravity sanitary main, sanitary force main, pump station and wastewater treatment plant components and operation. The individual should also be versed in water main installation, water supply distribution systems and the components and operation of water treatment plants. The individual may also inspect storm sewer systems and roadway construction. The candidate should have a minimum of 5 years’ experience in this field. They will provide construction observation and project management services for municipal and county agencies. PRIMARY DUTIES: • Perform constructability and plan reviews prior to construction. Interact with the design engineer with input before the project goes out to bid., • Perform construction management services for projects that consist of water supply and sanitary distribution systems. Including work in water and wastewater plants. Ensure the job site is maintained in a safe, neat, and orderly fashion by the contractor., • Provide inspection of contractors work to ensure that the work is being performed as per plans and specifications and regulatory requirements. Communicate with the project manager daily about the progress on the project. Keep the client informed of the project’s progress., • Attending and running pre-construction & weekly progress meetings with the client and contractor and give input on issues that arise during construction. Follow through with RFIs to maintain the project runs as scheduled and communicate with Engineering Team., • Conduct on-site observations of the work in progress to assist Engineer in determining if the Work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Keep a diary or logbook of all observations and daily activities for ongoing work and provide Engineer with daily reports to include all labor trades and equipment supplied by Contractor., • Review applications for payment with Contractor and confer with Engineer on recommendations for progress payments., • Be knowledgeable of NJDEP procedures and requirements for management of a project., • Perform field testing of materials installed and start-up and acceptance of equipment., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Construction and building inspectors examine worksites, both alone and as part of a team. Some inspectors climb ladders or crawl in tight spaces. Most work full time during regular business hours. KNOWLEDGE, SKILLS, and ABILITIES: • Applicant must have demonstrated experience in water/wastewater inspections., • Good communication skills, with the ability to work with others and the public, • Self-motivated, organized, and focused, with good attention to detail EDUCATION/EXPERIENCE: • Minimum of 5 years of construction observation or construction experience directly related to one of the following disciplines: water supply and distribution systems, sanitary sewer collection and water / wastewater treatment systems, and roadway construction., • High School diploma or equivalent, • Must have computer literacy in Microsoft Office and Microsoft outlook. CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET Certification a plus, • Traffic Control Coordinator, • NICET – Highway Construction, • ACI - Field Technician Certification, • New Jersey Society of Asphalt Technicians - Field Testing, • NJDOT - Traffic Control Coordinator, • NACE - CIP Level 1, • OSHA - 10/30, • NASSCO - Pipe Assessment, • Confined Space Training SUPERVISORY RESPONSIBILITY This position has no supervision responsibilities. The annual base salary range for this full-time position in the United States is $55,000 - $82,500. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins.

Job Description POSITION SUMMARY: Remington & Vernick Engineers is looking for a NICET Certified Professional (or equivalent) with expertise in inspecting heavy highway, intersection improvements, and bridge rehabilitation/reconstruction projects. This professional will assist in the project record keeping, measuring and tracking daily quantities as constructed, and generating daily inspection reports. This individual is expected to have an extensive background in construction inspection with clients such as local County government agencies, NJDOT, the NJTA, DRPA, and DRJTBC. PRIMARY DUTIES: • Act in the capacity of Lead Inspector to conduct construction supervision and field inspection of the work in progress to determine if the work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Work collaboratively with other engineers, professionals, and infrastructure authorities on Federal, State, regional, and local improvement projects., • Work with clients to inform the public about upcoming work and potential impacts. Work with the contractor to minimize disruptions to the public., • Provide and maintain all records related to the project in question including daily quantities., • Possess strong communication, computer, and writing skills and be experienced with the review and comprehension of CPM Schedules, • Support the Project Manager / Resident Engineer with all project submittals and requests for information, ensuring the proper Engineer performs the necessary review and/or guidance., • Keep a logbook of all observations and daily activities for ongoing work and provide the client with daily reports to include all labor trades, equipment supplied by Contractor, and measured pay quantities., • Review applications for payment with Contractor and make recommendations for progress payments to the Client., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Good communication skills, with the ability to work with others and the public., • Self-motivated, organized, and focused, with good attention to detail. EDUCATION/EXPERIENCE: • High School diploma or equivalent, • Minimum of 5 years of experience with 2+ years of experience on projects $5M or greater, • Experienced on bridge, and highway construction projects, • Must be familiar with NJDOT specifications and documentation practices., • Possess a combination of NJ County, NJDOT, NJTA, DPRA, and DRJTBC experience CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET 2+ Highway Construction Inspection or equivalent required, • ACI-Concrete Field Testing Technician, • NJSAT Asphalt Paving Construction Technologist, • Rutgers TCC certification SUPERVISORY RESPONSIBILITY This position has some supervisory responsibility. PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee works primarily in the field and may be exposed to outside weather conditions. Work requires full range of motion and ambulation, climbing ladders or crawling in tight spaces. Requires technology and computer use to file project, time, and expense reports. May occasionally require lifting up to 25 pounds. Travel to worksites and regional offices worksites will be required. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $68,000 - $102,000. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. We are an at will employer.

Job Description Pay: $30.00 - $45.00 per hour Why This Is a Great Opportunity • Join a respected outdoor construction team known for high-quality residential and commercial work across New Jersey, • Lead hardscape projects you can be proud of, including pavers, patios, walls, outdoor living features, and related site work, • Step into a leadership role where your experience, craftsmanship, and ability to run a crew will be valued, • Enjoy the opportunity to grow with a company that emphasizes quality, professionalism, and long-term success Note: To be considered, you must have direct hardscape or landscape construction experience, prior crew leadership experience, and a valid driver's license. About Us We are a well-established landscaping and outdoor construction team serving residential and commercial properties throughout New Jersey. Our reputation is built on quality workmanship, professionalism, and a commitment to delivering projects the right way. Confidential Employer. Job Description • Lead daily hardscape crew operations on active job sites, • Oversee installation of patios, pavers, walkways, retaining walls, steps, outdoor kitchens, fire pits, and related features, • Ensure work is completed safely, efficiently, and to company quality standards, • Coordinate labor, materials, equipment, and daily job flow, • Read plans, layouts, and project specifications and help execute work accordingly, • Train, guide, and support crew members in the field, • Communicate job progress, site needs, and issues to management, • Maintain organized, professional, and productive job sites, • Help ensure projects stay on schedule and meet client expectations, • 3+ years of hardscape, masonry, landscape construction, or closely related outdoor construction experience, • Prior experience leading a crew, crew leader experience, or foreman-level field responsibility, • Experience with pavers, retaining walls, grading, site prep, and outdoor living installations, • Ability to read plans, follow layouts, and manage field execution, • Valid driver's license, • Strong work ethic, communication, and problem-solving skills, • Ability to work outdoors in varying conditions and perform physical job duties, • English communication skills preferred You will have the chance to lead real projects, make an impact in the field, and work alongside a team that values skill, dependability, and pride in the finished product. This is a strong opportunity for someone who wants steady work, leadership responsibility, and room to grow with a company that holds a high standard. JPC-934 Job Type: Full-time Benefits: • Dental insurance, • Retirement plan, • Vision insurance

Job DescriptionShipping Clerk Urgently Needed for Food Manufacturing Company in Newark, NJ Urgently Hiring, can interview and start within the same week! Shift: 7am-3:30pm (Monday-Friday) Pay: $22-$23/hour ; Overtime: $33-$34.50/hour Location: Newark, New Jersey Job Description: • Provide training for all shipping personnel including job procedures, paperwork, inventory, safety, and GMPs. Verify accuracy of all data entry and paperwork turned in by the warehouse team., • Provide input and feedback into the employee schedule., • Execute against the schedule, calling in drivers and dispatchers or reducing hours as required., • Organize people and equipment to maximize warehouse productivity., • Input on annual employee evaluations., • Identify potential for growth and training and improve on performance deficiencies., • Participate in disciplinary action proceedings where needed., • Ensure the proper training and safe utilization of all shipping personnel, equipment, including the forklift, electric and manual pallet jacks., • Monitor physical inventory to ensure orders fulfillment, • Communicate order shortage to customer service, • Order material from supplies, • Utilize Batchmaster to record inventory movement., • Perform weekly physical inventory of all finished goods, • Maintain orderliness of material storage areas, • Maintain stock rotation, • Record lot numbers for traceability, • Clean and inspect stock to prevent infestation, • Ensure proper receiving guidelines are followed., • Monitor storage conditions for proper temperatures Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Concrete Repair Technician Job Description We are seeking a dedicated Concrete Repair Technician to perform heavy, labor-intensive concrete restoration work on commercial and infrastructure projects. This role involves chipping, grinding, patching, and structural repair in high-dust, high-intensity environments. Technicians must follow strict safety procedures, use fall-protection equipment, and wear respirators. Travel to job sites across NY and NJ is required. Responsibilities • Perform heavy concrete labor including chipping, demolition, patching, and structural repair., • Utilize hand tools and power tools effectively., • Follow construction safety protocols and use personal protective equipment (PPE)., • Operate chipping guns, grinders, and other concrete repair tools., • Work comfortably at heights using fall-protection systems., • Wear a half-face respirator and meet fit-test requirements., • Travel between NY and NJ job sites as needed.Essential Skills, • Strong physical stamina; ability to lift, bend, kneel, and work long hours., • Ability to read and speak English; bilingual English/Spanish is a plus., • Experience using concrete repair tools., • Familiarity with construction safety protocols., • Comfortable working at heights with fall-protection systems.Additional Skills & Qualifications, • Prior experience in concrete restoration, waterproofing, or structural repair preferred., • Ability to work on temporary flooring, scaffolding, and elevated platforms., • Must pass extensive safety training before starting., • Reliable transportation to reach various job sites., • Strong work ethic and ability to work in a team with primarily Spanish-speaking crews., • OSHA certifications are a plus.Why Work Here? Join a stable, growing company in the concrete repair industry with opportunities to work on large-scale, high-impact infrastructure projects. We offer a strong safety culture with comprehensive training and career growth potential into lead tech, foreman, or specialty repair roles. Work alongside a tight-knit, experienced field team. Work Environment Work takes place at outdoor and indoor construction sites, often in high-dust, noisy environments with heavy tool usage. The role involves working at heights, on temporary platforms, and in confined or awkward spaces. Expect a fast-paced, physically demanding labor environment. Majority Spanish-speaking field crews. Travel between NY and NJ is required depending on project needs. Job Type & Location This is a Contract to Hire position based out of Lincoln Park, NJ. Pay and Benefits The pay range for this position is $20.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionPOSITION SUMMARY: The Municipal Engineer is a professional with 7+ years of experience. This individual will design, manage and/or represent a variety of infrastructure projects (owned by municipalities and local school districts). PRIMARY DUTIES: • Responsible to act as the client manager to one or more municipalities or other public agencies. The client manager will act as the single point of contact between the firm and the client. He/she will supervise and coordinate all projects performed in the firm on behalf of the client, to the client’s satisfaction., • Develop or implement engineering solutions to assist clients with improving and maintaining their infrastructure., • Design transportation, utility, facility, or hydraulic systems or structures (as appropriate) using computer assisted design or drawing tools., • Compute load and grade requirements, water flow rates, or material stress factors to determine design specifications., • Estimate quantities and cost of materials, equipment, or labor to determine project feasibility., • Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data., • Conduct studies of traffic patterns or environmental conditions to identify engineering problems and assess potential project impact., • Perform all design activities ensuring compliance with environmental, safety, or other governmental regulations., • Identify environmental risks and develop risk management strategies for projects., • Attending regularly scheduled public meetings (conducted by Municipal clients) in the capacity of Municipal Engineer, or Land Use Board Engineer. Prepare and present public reports on topics such as bid proposals, project status reports and developmental review projects., • Provide technical advice to clients regarding design, construction, or capital program modifications., • Support of the field activities of our construction inspection staff, including providing timely data, shop drawing review, and client coordination. KNOWLEDGE, SKILLS and ABILITIES: • Municipal Engineering experience preferred but not required., • Strong oral and written communication skills, • Ability to make public presentations., • Ability to define problems, collect data, establish facts and draw conclusions to present to co-workers and clients., • Strong organizational skills and attention to detail, • Knowledge of computer aided design software., • Ability to work in groups as well as individually.EDUCATION/EXPERIENCE:, • Bachelors of Science Degree in Civil Engineering from an accredited four-year college or university CERTIFICATIONS/LICENSES REQUIRED • PE License Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasionally lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemical company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF11.20 billion in sales in 2025. Job Description Broad Function and Purpose of Position: This position is responsible for planning, directing, and managing all technical resources for the Lyndhurst facility, including building, infrastructure, and equipment. The role oversees capital budget projects, maintenance operations, and supervises Engineering and Maintenance departments. Key Responsibilities: • Develop, implement, and continuously improve a preventive maintenance system; monitor effectiveness and optimize overall equipment effectiveness (OEE), • Manage and supervise the Maintenance Department workforce, including Shift Mechanics and Instrument and Control Technicians; optimize labor and materials utilization, • Lead capital investment projects and major facility initiatives from planning through execution, ensuring alignment with project scope, timeline, and budget parameters, • Train and guide manufacturing teams to ensure proper equipment maintenance and operational capability, • Establish departmental goals and performance standards; provide professional development and coaching to technical personnel, • Develop and administer the Engineering and Maintenance departmental budget in cooperation with management Qualifications: • B.S. in Engineering (Mechanical or Electrical); advanced degree preferred, • 5+ years' experience in chemical and industrial manufacturing environments with demonstrated project management expertise, • Excellent communication and employee relations skills across all organizational levels, • Strong technical analysis and problem-solving capabilities with ability to function in fast-paced, dynamic environments, • Knowledge of regulatory requirements and industry certifications (ISO 14000, QS9000, TS16949) Additional Information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job DescriptionSalary: Based on Experience School Business Administrator MISSION: The mission of Marion P. Thomas Charter School is to build culturally rich, transformative, educational spaces that cultivate successful, lifelong innovators who use their passions, character, and intellect to better themselves, the greater Newark community, and the world beyond. QUALIFICATIONS: 1. Valid New Jersey School Business Administrator Certificate or Certificate of Eligibility., 5. Demonstrated organizational, leadership, communication, and interpersonal skills. REPORTS TO: Superintendent of Schools SUPERVISES: All business office personnel. JOB GOAL: To supervise, manage, and coordinate the business and financial affairs of the school district efficiently and effectively in order to support the educational program and ensure compliance with all applicable federal and state laws, regulations, and Board of Trustees policies. PERFORMANCE RESPONSIBILITIES (including but not limited to): Budget and Finance Facilities and Operations 3. Oversees food services operations in compliance with applicable laws and regulations. Human Resources and Labor Relations Support 1. Oversees employee benefits administration in accordance with Board-approved plans., 5. Prepares and oversees bids, requests for proposals, and contractual agreements., 6. Administers the districts insurance, risk management, and claims programs. Records Management Compliance and Reporting 2. Establishes and monitors internal controls to safeguard district assets. Miscellaneous Performs such other duties as may be prescribed by law or assigned by the Superintendent of Schools. TERMS OF EMPLOYMENT: Twelve (12) month position. Salary, benefits, and contract terms as established by the Board of Trustees. EVALUATION: Performance shall be evaluated annually by the Superintendent of Schools in accordance with New Jersey law and Board of Trustees policy. NEXT STEPS: MPTCS is currently reviewing applications on a rolling basis. Due to the high volume of responses received not every applicant will be contacted. If you meet the qualifications, you will be contacted to move forward in the selection process. Marion P. Thomas Charter School provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Bachelor's degree in Construction Management, Civil Engineering, or a related field (or equivalent experience). Assist in the preparation of cost estimates for various construction projects, including materials, labor, equipment, and overhead.

Job Description Warehouse Associate (Cold Storage Environment) Start Date: 5/14/2026 • Schedule: 7:00 AM – 4:00 PM, Monday–Friday Overtime availableEmployee Value Proposition (EVP), • Free lunch, • Large, well-established company, • Strong opportunity to transition to permanent employmentRequirements (Read Carefully), • MUST HAVE Steel-toe boots (mandatory no exceptions), • Must be comfortable working in very cold environments (refrigerators and freezers), • Must bring appropriate layered clothing for freezer work (candidates will be sent home if unprepared), • Must be flexible with schedulesJob Duties, • Prepare and complete orders for delivery or pickup according to schedule, • Unload containers, trucks, and vehicles using conveyor belts and turntables, • Move, wrap, label, and store pallets in designated warehouse locations using a scanner connected to WMS, • Classify and handle frozen, refrigerated, and dry products, • Merge pallets with identical products or same destinations, • Transfer same-day shipping pallets to loading docks, • Load prepared pallets onto trucks as instructed by management, • Unload containers sequentially as directed (average 8 containers per week)Work Environment, • Warehouse setting, • Extremely cold temperatures in fridges and freezers This is a Contract to Hire position based out of Carlstadt, NJ. Workplace Type This is a fully onsite position in Carlstadt,NJ. Work Environment The role is based in a warehouse environment that includes refrigerated areas and very cold freezers, so you will work in low-temperature conditions for significant portions of your shift. Steel toe boots are mandatory, and you must wear appropriate layers and warm clothing suitable for freezer work; those not properly dressed may be sent home for safety reasons. The facility operates multiple shifts, including a 7:00 a.m. to 4:00 p.m. shift and a 1:00 p.m. to 10:00 p.m. shift, Monday through Friday, with overtime available as needed. All new hires start on the 7:00 a.m. to 4:00 p.m. schedule for training before transitioning to other shifts. You will work with RF scanners, voice-directed systems, conveyor belts, wrapping turntables, high row equipment, and electric pallet jacks in a busy, structured warehouse setting that emphasizes safety, organization, and cleanliness. Job Type & Location This is a Contract to Hire position based out of Carlstadt, NJ. Pay and Benefits The pay range for this position is $16.00 - $17.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.