Trabajos construction labor en Kansas City, MissouriCrear alertas

Job Description Job Title: Entry-Level Mechanic Job Description We are seeking a dedicated Construction Laborer to join our team, responsible for performing a variety of tasks involving manual labor in concrete and masonry construction projects. This role includes preparing surfaces for concrete, shoveling concrete into construction areas, and performing general labor tasks. The Construction Laborer will also maintain a clean job site by picking up tools and equipment, securing the job site daily to eliminate hazards, handling materials, and ensuring proper safety and incident reporting procedures are followed. Responsibilities • Perform manual labor in concrete and masonry construction projects., • Prepare surfaces for concrete application., • Shovel concrete into designated construction areas., • Maintain a clean and safe job site by securing tools and equipment daily., • Handle and store materials appropriately., • Load, unload, haul, and hoist materials as required., • Follow proper safety and incident reporting procedures. Essential Skills • Knowledge of equipment, materials, and supplies used in concrete and masonry construction., • Understanding of first aid and applicable safety precautions., • Ability to work independently and adhere to work schedules., • Capability to lift heavy objects, walk, stand for long periods, and perform strenuous physical labor under adverse conditions., • Proficiency in oral and written communication. Additional Skills & Qualifications • Experience with hand tools, power tools, forms, and framing., • 1+ years experience in general labor, concrete construction, commercial construction, equipment operation, blueprint reading, and tape measure usage., • OSHA 10 certification. Why Work Here? Enjoy the opportunity for overtime and increase your hourly rate to $21 after completing a 520-hour contract. Our company offers a dynamic work environment where you can gain a variety of skills and grow professionally. Work Environment The role requires working both indoors and outdoors across various tasks and departments. You will be exposed to diverse weather conditions and must be able to walk on uneven terrain between buildings. The position demands physical endurance as you will be on your feet for extended periods, lifting up to 75 lbs, and working in squatting or kneeling positions. Safety gear, including steel-toed boots, a hard hat, and safety glasses, must be worn at all times. Job Type & Location This is a Contract to Hire position based out of Kansas City, KS. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Kansas City,KS. Application Deadline This position is anticipated to close on Oct 8, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Pavement Preservation Group is Now Hiring CDL-A Road Crew Drivers!Earn $25.00 per Hour - Home DailyComprehensive Benefits Available - Advancement Opportunities\n \n We are seeking dependable CDL-A Drivers to safely transport materials to customers, company facilities, and project sites while supporting operations across our pavement preservation network. \n Top Pay & Benefits:\n\n • Earn $25.00 per hour\n, • Home daily\n, • Weekly pay\n, • Medical, dental, and vision insurance\n, • Company-paid life insurance\n, • Optional disability and supplemental coverage\n, • 401(k) with company match\n, • Paid time off\n, • Paid holidays\n, • Paid training\n, • Referral program\n, • Career growth and advancement opportunities\n\n Want a Career with Pavement Preservation Group? Apply Today!\n Job Responsibilities:\n This position involves operating a tanker truck, transporting pavement preservation materials, performing inspections, completing required documentation, and maintaining compliance with DOT regulations and company safety standards. Drivers may support plant operations, material deliveries, and construction activities depending on location and business needs. \n\n • Operate and drive various trucks assigned to road crews, including dump trucks, tractors pulling lowboys, service trucks hauling over 10,000 pounds, and company pickups\n, • Drivers should be able to stay overnight for up to one week at a time and occasionally up to two weeks based on project needs.\n, • Transport materials, equipment, and machinery to and from job sites\n, • Load and unload materials safely and efficiently\n, • Perform manual labor and surface preparation work when assisting the crew\n, • Conduct pre-trip and post-trip inspections and report maintenance or safety concerns\n, • Complete required logs, inspections, and transportation documentation\n, • Ensure proper loading and securement of materials and equipment before transport\n, • Ensure proper loading and securement of materials and equipment before transport\n, • Communicate effectively with team members to support daily operations\n, • Perform additional duties as assigned\n, • Up to 50% travel, including overnight travel. Drivers should be able to stay overnight for up to one week at a time and occasionally up to two weeks based on project needs\n\n About Pavement Preservation Group:\n Pavement Preservation Group (PPG) is a leading provider of pavement preservation products and services. With more than 100 years of combined experience, our portfolio of best-in-class operators delivers superior results through advanced techniques and trusted local execution. Focused on innovation, safety, and long-term growth, we offer opportunities to work alongside industry leaders in both skilled trades and corporate roles. \n Qualifications:\n\n • Valid Class A CDL required\n, • One (1) year of commercial driving experience preferred\n, • Must pass MVR, FMCSA Clearinghouse, and pre-employment screening requirements\n, • Tanker and/or Hazmat endorsements preferred\n, • Valid DOT Medical Card\n, • Acceptable driving record\n, • Ability to pass required pre-employment screenings, including drug testing\n\n Ready To Get Started with Pavement Preservation Group? Apply Today!\n Pavement Preservation Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, or any other protected status under applicable law.

Job Description Do you take pride in hands‑on work that delivers results you can see and stand behind? At Groundworks, North America's leader in foundation solutions, our Installers play a critical role in transforming homes and protecting what matters most to our customers. Working alongside experienced crews and supported by industry‑leading training and equipment, you’ll install proven foundation and water management solutions that make a lasting impact. If you thrive in a fast‑paced, team‑driven environment and want a stable career with growth opportunities with an award-winning company, this role is built for you. Installers are responsible for traveling to a residential or commercial building to install equipment, troubleshoot problems with the work assigned, test the equipment, and clean up the job after completion. Duties and Responsibilities Perform general construction labor tasks including digging, back-filling trenches, and site clean-up. Assist with the installation of products and services under supervision. Load, carry, and deliver heavy materials (up to 50 lbs) to and from job sites. Enter confined spaces such as crawl spaces and basements to perform repairs. Work outdoors in various weather conditions while maintaining safety standards. Follow instructions closely and adhere to company policies, including safety and workplace conduct. Foster teamwork by building positive relationships and supporting team goals. Maintain professionalism, integrity, and uphold the company’s reputation. Assist with additional tasks as assigned by supervisors to ensure project success. It is an essential function of this job that the employee regularly and reliably reports to work on time each working day. Qualifications Knowledge of trade specific tools for installations and correct use of equipment Previous experience working in the construction industry Must have a valid, non-restrictive driver’s license. Ability to Lift heavy objects up to 50 lbs Working Conditions Walks and stand for long periods of time Performs strenuous labor often under adverse conditions What We Offer: • Competitive base pay + bonus paid per job ($40-50k avg.), • Best-in-class certification program creates path to real career growth, • Tools & transportation to the job site provided, • Free pair of Red Wing work boots provided every year, • Performance opens doors to elite recognition, trips & events, • Annual Tribe Appreciation Tour, holiday & volunteer events, • Upward mobility - we promote from within 80% of the time, • When you win, you own it—our Employee Ownership Program lets you share the upside, • Tuition Reimbursement Program - we invest in your development!, • Work-life balance - 2 weeks PTO and 6 paid holidays, • US: Affordable and comprehensive benefits package including medical, dental, vision, long & short-term disability, company-paid life insurance, 401(k) and company match & paid maternity leave, • Canada: Affordable and comprehensive benefits package including medical, dental, long & short-term disability, and company paid life insurance The anticipated salary range is the expected hiring range for this role in Missouri is $14.45 - $17.00. Final compensation will be based on an evaluation of each candidate's qualifications, relevant experience, demonstrated capabilities, and work location.\nCompany Description Our Tribe As the nation’s largest privately held foundation services company, we do things differently than the typical contractor. We live up to our word and the exceptional service our customers have come to expect from us. It’s the Groundworks difference. Our strength does not lie in our numbers, but in our people and their experience and expertise. We are a nationwide family of visionaries who put our customers first and set out to accomplish what no other foundation repair company has ever accomplished before. Today, with more than 5000 employees in 61 locations, Groundworks is the nation’s leading and fastest-growing foundation services company. The combined companies have helped over 1 million homeowners protect and repair their most valuable asset, their home. Our Tribe\r\n\r\nAs the nation’s largest privately held foundation services company, we do things differently than the typical contractor. We live up to our word and the exceptional service our customers have come to expect from us. It’s the Groundworks difference.\r\n\r\nOur strength does not lie in our numbers, but in our people and their experience and expertise. We are a nationwide family of visionaries who put our customers first and set out to accomplish what no other foundation repair company has ever accomplished before.\r\n\r\nToday, with more than 5000 employees in 61 locations, Groundworks is the nation’s leading and fastest-growing foundation services company. The combined companies have helped over 1 million homeowners protect and repair their most valuable asset, their home.

Job Description General Laborer – Immediate Openings LaborMAX Staffing is currently hiring dependable General Laborers for a variety of assignments throughout the area. We are looking for hardworking individuals who are ready to work, learn new skills, and become a valuable part of a team. Job Responsibilities • Perform general labor and warehouse duties, • Load and unload materials and products, • Assist with site cleanup and organization, • Operate basic hand tools and equipment, • Move, stack, and organize inventory, • Follow safety procedures and company policies, • Assist supervisors and team members with daily tasks, • Complete assigned duties efficiently and professionally Qualifications • Previous labor, warehouse, construction, or manufacturing experience is a plus, but not required, • Ability to lift up to 50 pounds regularly, • Ability to stand, bend, walk, and perform physical work throughout the shift, • Reliable transportation preferred, • Strong work ethic and positive attitude, • Ability to work independently and as part of a team What We Offer • Weekly/Daily pay, • Competitive wages, • Full-time and part-time opportunities available, • Temporary, temp-to-hire, and long-term assignments, • Opportunity to gain experience in multiple industries, • Fast hiring process Schedule Various shifts available, including: • 1st Shift, • 2nd Shift, • Weekend Opportunities Apply Today Join the LaborMAX Staffing team and start working quickly. We partner with leading companies throughout the area and are always looking for motivated individuals ready to work. LaborMAX Staffing "Putting People to Work" Apply today or contact your local LaborMAX Staffing office for more information. \nCompany Description At LaborMax Staffing, our vision is to provide unparalleled customer service, personalized support, and life-changing opportunities. Guided by values of integrity, honesty, passion, and respect, we foster a team-driven environment that embraces positive change and excellence in workforce solutions. LaborMax Staffing offers streamlined workforce management using a combination of speed, compliance, and industry expertise to deliver the right talent for your needs. At LaborMax Staffing, our vision is to provide unparalleled customer service, personalized support, and life-changing opportunities. Guided by values of integrity, honesty, passion, and respect, we foster a team-driven environment that embraces positive change and excellence in workforce solutions. LaborMax Staffing offers streamlined workforce management using a combination of speed, compliance, and industry expertise to deliver the right talent for your needs.

Job DescriptionJob Title: Construction LaborerJob Description We are seeking a dedicated Construction Laborer to join our team, responsible for performing a variety of tasks involving manual labor in concrete and masonry construction projects. This role includes preparing surfaces for concrete, shoveling concrete into construction areas, and performing general labor tasks. The Construction Laborer will also maintain a clean job site by picking up tools and equipment, securing the job site daily to eliminate hazards, handling materials, and ensuring proper safety and incident reporting procedures are followed. Responsibilities • Perform manual labor in concrete and masonry construction projects., • Prepare surfaces for concrete application., • Shovel concrete into designated construction areas., • Maintain a clean and safe job site by securing tools and equipment daily., • Handle and store materials appropriately., • Load, unload, haul, and hoist materials as required., • Follow proper safety and incident reporting procedures.Essential Skills, • Knowledge of equipment, materials, and supplies used in concrete and masonry construction., • Understanding of first aid and applicable safety precautions., • Ability to work independently and adhere to work schedules., • Capability to lift heavy objects, walk, stand for long periods, and perform strenuous physical labor under adverse conditions., • Proficiency in oral and written communication.Additional Skills & Qualifications, • Experience with hand tools, power tools, forms, and framing., • 1+ years experience in general labor, concrete construction, commercial construction, equipment operation, blueprint reading, and tape measure usage., • OSHA 10 certification.Why Work Here? Enjoy the opportunity for overtime and increase your hourly rate to $21 after completing a 520-hour contract. Our company offers a dynamic work environment where you can gain a variety of skills and grow professionally. Work Environment The role requires working both indoors and outdoors across various tasks and departments. You will be exposed to diverse weather conditions and must be able to walk on uneven terrain between buildings. The position demands physical endurance as you will be on your feet for extended periods, lifting up to 75 lbs, and working in squatting or kneeling positions. Safety gear, including steel-toed boots, a hard hat, and safety glasses, must be worn at all times. Job Type & Location This is a Contract to Hire position based out of Kansas City, KS. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Kansas City,KS. Application Deadline This position is anticipated to close on Oct 9, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionJob Title: Construction LaborerJob Description This role involves working as a construction laborer in Arkansas, supporting a variety of tasks on active job sites, including general labor, basic carpentry, framing, finish carpentry, concrete work, and assisting with electrical tasks under appropriate supervision. You will contribute to building, maintaining, and improving structures while safely operating hand and power tools and following established construction practices. Responsibilities • Perform general construction labor tasks such as site preparation, material handling, cleanup, and debris removal to keep the job site safe and organized., • Assist with framing work, including measuring, cutting, and assembling structural components according to specifications and directions., • Support carpentry and finish carpentry tasks, such as installing trim, fixtures, and other finish elements, ensuring accurate measurements and clean workmanship., • Help with concrete-related work, including preparing forms, mixing, pouring, and finishing concrete as directed by supervisors or skilled tradespeople., • Operate and maintain a variety of hand tools and power tools safely and efficiently, following all safety guidelines and manufacturer instructions., • Assist with basic electrical tasks under appropriate supervision, such as handling materials, routing cables, and supporting licensed personnel as needed., • Follow instructions from supervisors and skilled trades professionals to complete assigned tasks on schedule and to quality standards., • Maintain a clean, safe, and organized work area by storing tools properly, removing hazards, and adhering to site safety rules., • Support team members in various construction activities, adapting to changing priorities and tasks as project needs evolve., • Comply with all safety procedures, including the use of required personal protective equipment, and immediately report any unsafe conditions or incidents.Essential Skills, • Proven experience performing general labor on construction sites., • Hands-on experience with framing and basic carpentry tasks., • Ability to assist with finish carpentry, including precise measuring and installation., • Experience working with concrete, including form preparation, mixing, pouring, and finishing support., • Proficiency in using hand tools such as hammers, tape measures, levels, and wrenches., • Proficiency in using power tools such as drills, saws, and other construction equipment safely., • Ability to support basic electrical tasks under supervision, including handling materials and assisting skilled personnel., • Capability to follow detailed instructions and work effectively under the guidance of supervisors and tradespeople., • Physical ability to perform demanding tasks, including lifting, carrying, bending, and working on feet for extended periods., • Strong awareness of safety practices and commitment to maintaining a safe work environment.Additional Skills & Qualifications, • Previous experience as a construction laborer in Arkansas or similar environments., • Exposure to multiple trades such as carpentry, concrete work, and electrical support., • Ability to read or interpret basic measurements, layouts, and simple construction directions., • Willingness to learn new skills and adapt to a variety of tasks on construction projects., • Reliable attendance and punctuality for scheduled shifts on active job sites., • Strong teamwork skills and the ability to communicate clearly with supervisors and coworkers.Why Work Here? You will join a team that values reliable craftsmanship, safety, and collaboration on every project. The role offers exposure to multiple trades, giving you the opportunity to build practical skills in carpentry, concrete work, and electrical support while working alongside experienced professionals. This position provides consistent, hands-on work in a field environment where you can see the results of your efforts and grow your construction career over time. Work Environment This position is based on construction sites in Arkansas, working primarily in outdoor and partially sheltered environments that may be affected by weather conditions. You will work with a variety of hand and power tools, as well as construction materials such as lumber, concrete, and electrical components. The role typically involves standing, walking, lifting, and performing physical tasks throughout the shift. Standard personal protective equipment, such as work boots, hard hats, safety glasses, and gloves, is required to maintain safety on site. Work hours may vary depending on project schedules and site requirements, and you may be expected to adapt to changing tasks and conditions as construction progresses. Job Type & Location This is a Contract position based out of Kansas City, MO. Pay and Benefits The pay range for this position is $23.00 - $25.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Kansas City,MO. Application Deadline This position is anticipated to close on Oct 8, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionJob Title: Stacker/PackerJob Description The role involves supporting machine operators by loading and unloading large rolls of coatings. This position includes general production tasks such as prepping and setting up pallets, using a nail gun, rolling and loading new rolls on pallets, and unloading and rolling used rolls onto other pallets. You will be responsible for securing rolls using wrapping and wires and directing forklift operators as needed. Responsibilities • Prep and set up pallets, potentially using a nail gun., • Roll and load new rolls onto pallets and unload used rolls onto other pallets., • Secure rolls using wrapping and wires., • Direct forklift operators to ensure efficient operations.Essential Skills, • Experience in production, stacking, loading, packing, and general labor., • Ability to use a pallet jack., • Skills in palletizing and pallet building., • Competence in inventory management.Additional Skills & Qualifications, • Comfortable being on feet for the entire shift., • Physically capable of handling rollable heavy weights., • Personal protective equipment required: steel toe boots, safety glasses, earbuds, and gloves. Glasses, buds, and gloves are provided.Why Work Here? The company offers an attractive benefits package, including an HSA, and starting in January, matching up to 5% in 401k. Bonus programs are in place for the whole team based on production goals and performance. Employees receive shift differentials once direct. Work Environment The work environment is non-climate controlled, resembling a smaller warehouse with an open trailer dock. Numerous fans help maintain a cooler atmosphere, and hydration is encouraged. Break rooms are equipped with air conditioning. Job Type & Location This is a Contract to Hire position based out of Riverside, MO. Pay and Benefits The pay range for this position is $18.20 - $18.20/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Riverside,MO. Application Deadline This position is anticipated to close on Sep 25, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Summary We are seeking a Senior Electrical Estimator for a direct hire opportunity in Kansas City, MO, supporting complex electrical construction projects across industrial facilities, infrastructure, commercial, public, and federal work. This full-time, on-site role is ideal for an experienced electrical estimating professional who can lead the bid process from initial document review through final submission with accuracy, confidence, and minimal oversight. This opportunity offers strong visibility with executive leadership, a collaborative construction environment, and the chance to influence estimating standards, mentor developing team members, and support high-value project pursuits. The role is well suited for someone who values technical precision, teamwork, process improvement, and long-term career stability within a supportive leadership structure. Key Responsibilities • Lead full-lifecycle electrical estimating efforts for design-build, design-bid-build, and CM-at-risk project delivery models., • Review plans, specifications, bid documents, and addenda to develop accurate scopes of work and complete electrical estimates., • Perform detailed quantity takeoffs for conduit, wire, switchgear, distribution, lighting, controls, fire alarm, and low-voltage systems., • Build detailed cost estimates using Accubid, including labor units, crew composition, productivity factors, materials, equipment, and subcontractor costs., • Solicit, level, and evaluate vendor and subcontractor quotes, attend pre-bid walks, resolve RFIs, and prepare complete bid packages., • Support project turnover, post-bid buyout, change orders, value engineering, historical cost updates, and mentoring of junior estimating staff. Compensation and Benefits • Salary range: $80,000 to $125,000 per year., • Direct hire opportunity., • Full-time, on-site role in Kansas City, MO., • Occasional site visits and pre-bid walks., • Comprehensive health, dental, and vision insurance., • 401(k) with company match., • Retirement plan., • Paid time off. Equal Opportunity Employer / Disabled / Protected Veterans The Know Your Rights poster is available here: https://www.eeoc.gov/sites/default/files/2023-06/22-088EEOCKnowYourRights6.12.pdf The pay transparency policy is available here: https://www.dol.gov/sites/dolgov/files/ofccp/pdf/pay-transp%20EnglishformattedESQA508c.pdf For temporary assignments lasting 13 weeks or longer, the Company is pleased to offer major medical, dental, vision, 401k and any statutory sick pay where required. We are committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation for any part of the employment process, please contact your staffing representative who will reach out to our HR team. AppleOne participates in the E-Verify program in certain locations as required by law. Learn more about the E-Verify program. https://e-verify.uscis.gov/web/media/resourcesContents/E-VerifyParticipationPoster_ES.pdf We also consider for employment qualified applicants regardless of criminal histories, consistent with legal requirements, including, if applicable, the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance. Pursuant to applicable state and municipal Fair Chance Laws and Ordinances, we will consider for employment-qualified applicants with arrest and conviction records, including, if applicable, the San Francisco Fair Chance Ordinance. For Los Angeles, CA applicants: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. #1116 \nCompany Description This company offers growth and a great group of people to work with. This company offers growth and a great group of people to work with.

What you’ll need to succeed as a Team Driver at XPO Minimum qualifications: • Be a member of an existing team. We are only recruiting existing teams, and both team members must apply to this position, • Able to partner with another driver in a sleeper tractor on extended runs, • Be at least 21 years of age, • Have a valid Class A commercial driver’s license, • Have a working knowledge of vehicle safety and control systems, • Safe driving record and history, • Hold a valid DOT Medical Certification Card or pass a company-paid DOT physical, • Available to work away from home in a five-day work week, • Possess hazardous materials, tank vehicle and doubles/triples endorsements Preferred qualifications: • Team driving or over-the-road experience, • Strong verbal and written communication skills for effective coordination with dispatchers and team members, • Able to work independently and collaboratively in a team environment, demonstrating strong teamwork and cooperation About the Team Driver job Pay, benefits and more: • Weekly pay, • Mileage pay will be paid at the designated rate of $0.974 per mile, split between each driver ($0.487 per mile) for all tasks related to the completion of the load, • Hourly pay of $35.42 will be provided for en route waiting times of more than an hour due to traffic, construction or weather-related delays, • Reimbursement for on-the-road showers, • Typical schedule is 5 days on, 2 days off, • Full health insurance benefits available on day one, • Hourly pay for 6 holidays, • PTO offered, • 401k with company match, • No touch and in-house freight, • Shops and fueling stations across the network to reduce delays, • 2023 Freightliner and Kenworth automatic trucks, • Microwaves and refrigerators in sleeper cabs, • Tool and repair kit in tractors What you’ll do on a typical day: • Run loads between XPO facilities for pickup and drop off and work with fellow XPO employees, • Navigate various routes, maintain CMV safety, and ensure compliance with transportation regulations, • Operate various tractor-trailer combinations over long distances in a typical 5-day work week away from home, • Operate the vehicle safely within DOT regulations, • Operate all internal freight transportation work tools and required systems Team Drivers are required to: • Lift objects of various shapes, sizes, and weights (frequently up to 50 lbs. and occasionally greater than 75 lbs.), • Safely climb in/out of tractor cab/trailer, • Sit for extended periods in a truck tractor, • Reach (including above your head), bend, climb, push, pull, twist, squat and kneel, • Operate a tractor-trailer combination for up to 11 consecutive hours; in all types of weather, while safely transporting all freight types, • Properly operate a handheld device Pursuant to U.S. Department of Labor requirements, the worker must be able to read and speak the English language sufficiently to converse with the general public, understand highway traffic signs and signals in English, respond to official inquiries, and make entries on reports and record. About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you’re looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement _. PandoLogic. Category:Transportation, Keywords:Class A Driver, Location:Kansas City, KS-66115

Job Description Are you driven to grow, lead, and make a meaningful impact? At Apex, we're building more than a consulting and engineering firm—we're creating a place where your career accelerates, your contributions matter, and your potential is fully realized. We believe your growth is our growth, which is why we invest in your development at every stage of your career. Here, you'll work on projects that shape communities, protect the environment, and create lasting impact, all while being empowered with the autonomy and flexibility to do your best work. Fueled by high-quality delivery, exceptional client retention, and strategic acquisitions, Apex Companies continues to rank among the fastest-growing firms in the AEC industry, recently recognized by the Zweig Group for our industry-leading growth. Our success is grounded in strong leadership, a collaborative culture, and a shared commitment to delivering exceptional outcomes. As we continue to expand, we're looking for high-performing professionals who are ready to lead, collaborate, innovate, and create impact. At Apex, you help shape what's next. When we succeed together, we share in that success. All Apex positions are eligible for annual bonus opportunities, reinforcing our commitment to recognizing and rewarding meaningful contributions that drive our collective growth. Position: Landscape Technician (Stormwater) Location: Kansas City, MO Compensation: $19.00 - $21.00 per hour, depending on experience Schedule: Full Time, 40-55 hours per week (Monday-Friday, overtime opportunities) Regional Travel: Required, typically 10-15 days per month (lodging and $55 per diem on travel days) We're hiring a Landscape Technician (Stormwater) to support the maintenance of stormwater infrastructure on commercial properties. This role is ideal for individuals with experience in landscaping, lawn care, construction, or groundskeeping, and for those who enjoy working outdoors and take pride in hands-on work! Why you'll love being on the Apex team: • Multiple Ways to Earn: Enjoy weekly pay, per diem, overtime opportunities, and performance-based annual raises., • Comprehensive Benefits: Access subsidized medical, dental, and vision coverage, plus company-paid life insurance, optional disability plans, and a 401(k) with company match., • Time Off: Receive 15 days of paid time off each year, along with 9 paid company holidays., • Long-Term Career Opportunities: Build a lasting career with Apex, supported by tuition assistance and ongoing professional development., • Purpose-Driven Work: Make a real difference by helping protect and improve water quality in your local communities. What you'll be doing: • Routine landscape maintenance and light repairs of stormwater systems and infrastructure (retention ponds, detention basins, drainage ditches, stormwater grates, and other stormwater assets), • Perform mowing, weed-trimming, debris removal, ground maintenance and cleanup, light construction, and maintenance repairs for client properties., • Operate landscaping and light construction equipment., • Travel from the shop to client sites locally and regionally using the company truck. 10-15 days per month is typical (Monday-Friday). What we're looking for: • 1-2+ years of experience with manual labor, outdoor experience preferred., • Solid understanding of landscaping equipment and materials preferred., • Willingness to travel locally and regionally required. 10-15 days per month is typical (Monday-Friday)., • Due to DOT interstate transportation requirements, employees must meet the minimum requirement of 21 years of age., • Valid driver's license, safe driving record, and a reliable method of transportation required., • Candidates must pass a pre-employment background check, motor vehicle record check, and drug screening. We are a drug-free workplace., • Ability to perform various physical tasks (i.e., bending, kneeling, pushing, pulling, lifting, etc.) and work in a variety of weather conditions. Interested in joining the stormwater team? Visit our website (https://apexcos.com/careers/) to apply today! Apex Job Title: Commercial Stormwater Compliance Technician Req ID:11848 Hourly Expected Pay Range $19—$21 USD We believe in equality for all and celebrate the diversity and differences of our employees, customers, and communities. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Apex aims to make apexcos.com accessible to all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact Talent@apexcos.com or (301) 417-0200. Likewise, feel free to reach out to us if you would like to view or discuss Apex policy related to equal employment opportunity or have any related concerns. EO/AA/VEV/Disabled Employer TO ALL RECRUITMENT AGENCIES: Apex Companies does not accept unsolicited agency resumes. Please do not forward resumes for any of our job postings to our career's sites, or to any employees of Apex Companies or affiliates. Apex Companies is not responsible for any fees related to unsolicited resumes.

Job Description Job Title: Commercial Roofing Foreman Start Date: Immediately Job Type: Full Time Salary Range: $38.00-$45.00/Hour DOE Position Overview: As a Commercial Roofing Foreman, you’ll be the leader on the roof—guiding your crew through daily operations while setting the standard for safety, quality workmanship, and productivity. You play a critical role in keeping projects on track, crews motivated, and job sites running safely and efficiently from start to finish. At J.R. & Co., Inc., we're not just building roofs—we're building careers. Established in 1986 and proudly veteran-owned, we're an energetic, optimistic, and family-oriented construction company based in Kansas City, MO. Our services span everything from commercial roofing, sheet metal, glass, solar panel installation, rooftop maintenance, and disaster relief. With a reputation for excellence in workmanship and customer service, we’ve earned recognition from top industry manufacturers and an A+ rating from the BBB. If you're looking for a place to grow, thrive, and make a real impact while working in a safety-focused, supportive environment, J.R. & Co., Inc. is the place for you. Join our team today and help us build something great! Essential Functions: • Coordinate with Crew Members, Superintendents, and Project Managers to manage scheduling, scope of work, and daily jobsite activities, including communicating any scope changes before execution., • Lead and support crew performance and development, ensuring productivity, accountability, and proper time tracking while resolving any timesheet discrepancies., • Document daily jobsite activity including production, quality control, and jobsite updates through accurate daily logs., • Communicate and coordinate with customers, subcontractors, and other trades to resolve issues and keep work progressing smoothly., • Manage jobsite readiness, materials, and equipment, including weather monitoring, end-of-day job protection, inventory coordination, and proper maintenance/storage of tools, vehicles, and trailers., • Enforce OSHA safety standards and jobsite compliance while maintaining a safe and professional work environment., • Maintain project schedules and production goals to ensure projects stay on time and within labor hour targets., • Participate in pre-construction meetings and job walkthroughs to ensure clear project expectations and alignment before work begins. Required Skills and Abilities: • OSHA 10 certification required (OSHA 30 preferred); able to obtain required equipment operation certifications, • Ability to obtain security clearance for military and secured job sites, • Familiar with SMACNA standards and construction best practices, • Ability to read and understand shop drawings, site plans, and specifications, • Strong leadership & communication skills, • Solid critical thinking, problem‑solving, time management, and organizational skills, • Self‑motivated, detail‑oriented, hard‑working, with a willingness to learn new systems, • Embodies company values: Family Culture, JR Attitude (humble & teachable), Extreme Ownership, and a growth mindset; communicates respectfully and adheres to company policies at all times Education and Experience: • Minimum 3 years construction experience,, • Minimum 3-5 years roofing specific experience, • Experience working with TPO, EPMD, Modified Bitumen, metal roofing, coping, and the above, listed materials Work Environment/Physical Requirements: • Pass initial drug test and participate in random drug test program, • Willing to travel, • Ability to perform elevated work (work on rooftops, heights), • Frequently lift and carry 50lbs or greater, • Frequent bending, kneeling, walking, • Outdoor environment in all types of weather (8+ hours per day) Compensation & Benefits: • Health, dental, vision, life insurance, • Paid time off, • Paid Parental Leave, • 401(k) with company match, • Fringe Benefit sub-plan (where applicable), • Company issued phone or phone stipend, • Company truck and fuel card or stipend, • Weekly Pay Schedule Location • In Person - Kansas City, MO 64108, • Day Shift: Mon-Friday, • Overtime and weekend work as job requires J.R. & Co., Inc. is proud to be an equal opportunity employer, committed to building a diverse and inclusive workforce. JR & Co. Inc. participates in E-Verify. To learn more visit www.e-verify.gov. All individuals who accept an offer of employment are required to complete a pre-employment drug screening and background check.

Job Description These positions are to be filled with individuals who are looking to gain skills in asphalt construction work. The positions will be filled with motivated, reliable, dependable individuals. This position will be expected to perform shoveling , sweeping, raking, traffic control, clean up, and general labor tasks. This position is offered a competitive wage, health insurance and retirement.

Job Description Job Title: Commercial Solar/Roofing Foreman Location: Kansas City, MO 64108 (In Person) Start Date: Immediately Job Type: Full Time Pay: $38.00–$45.00/hour - phone stipend, 401(k) match, full health benefits, and weekly pay We're hiring a Commercial Solar Foreman to lead our solar installation crews in Kansas City. You'll run the roof day to day - setting the pace on safety, quality, and production—and because solar work isn't always back-to-back, you'll also lead and perform commercial roofing work between solar projects. If you want steady, year-round work and a real path to grow, this is it. Why Join J.R. & Co. • Real advancement - many of our leaders started on our crews, • Safety-first culture where everyone goes home the way they came in, • Competitive pay, weekly, plus a full benefits package and a company truck, • Backed by an A+ BBB rating and recognition from the industry's top manufacturers What You'll Do • Lead daily jobsite operations, setting the standard for safety, quality, and production., • Lead and develop the crew—productivity, accountability, and accurate time tracking., • Direct solar PV installs: racking and mounting, module placement, array layout, and watertight flashing., • Coordinate with electricians and subcontractors on wiring, interconnection, and inspection readiness., • Lead and perform commercial roofing work when solar projects are light., • Coordinate with superintendents, project managers, customers, and trades on scope and scheduling., • Manage materials, equipment, weather monitoring, end-of-day protection, and tool/vehicle care., • Keep projects on schedule and within labor-hour targets while enforcing OSHA compliance. What You'll Need • OSHA 10 certification required (OSHA 30 preferred); able to obtain required equipment-operation certifications, • Familiarity with solar PV systems, racking/mounting hardware, and array layouts, plus jobsite electrical safety practices, • Ability to obtain security clearance for military and secured job sites, • Familiar with SMACNA standards and construction best practices, • Ability to read and interpret shop drawings, site plans, PV/electrical layouts, and specifications, • Strong leadership and communication skills, • Solid critical thinking, problem-solving, time management, and organizational skills, • Self-motivated, detail-oriented, and willing to learn new systems, • Embodies our values: Family Culture, JR Attitude (humble & teachable), Extreme Ownership, and a growth mindset Education & Experience • Minimum 3 years construction experience, • Minimum 2–3 years solar PV installation experience (commercial preferred), • Minimum 2–3 years roofing-specific experience, with the willingness to perform roofing work as needed, • Experience with solar racking/mounting systems and roofing materials including TPO, EPDM, Modified Bitumen, metal roofing, and coping Work Environment & Physical Requirements • Pass initial drug test and participate in the random drug-test program, • Willing to travel, • Able to perform elevated work (rooftops, heights), • Frequently lift and carry 50 lbs or greater, • Frequent bending, kneeling, and walking, • Outdoor work in all weather (8+ hours per day) Benefits & Compensation • $38.00–$45.00/hour DOE, • Weekly pay, • Health, dental, vision, and life insurance, • Paid time off an parental leave, • 401(k) with company match, • Fringe Benefit sub-plan (where applicable), • Company-issued phone or phone stipend Schedule • Day Shift: Monday–Friday, • Overtime and weekend work as the job requires Ready to lead and build something great? Apply today—we review applications promptly. J.R. & Co., Inc. is proud to be an equal opportunity employer, committed to building a diverse and inclusive workforce. J.R. & Co., Inc. participates in E-Verify. To learn more visit www.e-verify.gov. All individuals who accept an offer of employment are required to complete a pre-employment drug screening and background check.

Job Description Founded in 2010, Centric has grown into one of the most recognized general contractors in Kansas City and is active in its business, civic, and philanthropic communities. The company serves the workplace, retail, healthcare, institutional, industrial, hospitality, multi-family, and single-family residential markets, and has grown to 165 associates and $230 million in revenue from its home in Kansas City’s Crossroads Arts District. Most importantly, Centric prides itself on helping make Kansas City a cooler place to live, work, and play by building our city and its stories...from the ground up. This position supports Northtown Flooring, a subcontracting division of Centric, focused on delivering projects with the same excellence and client-first mindset that defines the Centric brand. Position Objective The Laborer position performs a wide range of physical labor tasks for the flooring installers during the construction phase of the project. Essential Job Functions • Clean and prepare specific areas of the job site as assigned, including cleaning up rubble, debris, and trash or removing hazardous materials, • Assist Flooring Installers as assigned. This may include jobs such as demolition, carrying jobsite materials, and various other construction-related tasks, • Prepare floors for flooring installation, • Apply flooring sundries as requested, • Maintain a construction site that is well-organized and clear of debris, • Load and unload construction materials to assist in job site progress, • Safely operate a wide variety of hand and power tools, • Utilize light industrial equipment to complete larger labor tasks as directed by the onsite Foreman or other members of field management, • Utilize knowledge of all local, state, and federal safety regulations to ensure labor tasks are completed in a safe manner, • Work 8-hour shifts that, at times, will require overtime/night & weekend work in order to get the job accomplished Basic Qualifications • High school diploma or GED required, • Valid driver’s license is required, • OHSA-10 certification is required within 30 days of employment Knowledge, Skills, and Abilities • Ability to understand directions, • Ability to properly care for and use tools of the trade, • Works well as part of a team, • Takes directions well, • Able to accomplish tasks with minimal manager supervision, • Maintains composure and professionalism in difficult situations, • Utilizes technology and is able to use it when necessary to communicate with supervisors and other associates Physical Requirements The physical demands described here represent those that must be met by an associate to successfully perform the essential functions of this job. The work environment characteristics described here are typical of those encountered while performing the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods of standing, crouching, bending, and kneeling, • Must be able to lift up to 100 pounds at a time, • Must be able to work with sharp tools and power equipment, • Must be able to work in a variety of weather conditions and terrains, • Must have manual dexterity, a good sense of balance, and excellent hand-eye coordination Superior Benefits Package • PTO, • 100% Employee-Owned!, • One month Sabbatical after seven years of continuous service, • Affordable, quality medical, dental and vision insurance, • HSA with company match, • Company paid life and disability insurance, • 401k plan with company contributions, • 529e college savings plan with company contributions, • Tuition reimbursement, • Student loan repayment assistance Centric is an equal opportunity employer. All applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job Description Founded in Kansas City, Missouri, in 1880, Clarkson Construction Company is a leader in delivering innovative solutions to some of the biggest infrastructure projects in the Midwest. Now in its sixth generation, family-owned Clarkson is one of the largest and most diverse contractors in the Kansas City region and proudly performs highway construction, site development and grading, bridge construction, parking garage construction, concrete paving, and airfield paving operations with its own labor and equipment forces. Position: Laborer Reports to: Foreman or Superintendent Job Type: Full-time, Union Essential Functions / Key Responsibilities: • Assist in the preparation of construction sites, unloading, loading, and moving construction materials, and clearing debris and hazards., • Operate a variety of hand and power tools, including drills, jackhammers, and other equipment., • Shovel, dig trenches, backfill holes, or compact earth., • Set formwork and paving steel for hand pours., • Direct traffic near construction sites when necessary to ensure the safety of workers and the public., • Perform tasks involving physical labor for heavy civil construction projects., • Adhere to and promote safety protocols, ensuring a safe working environment for yourself and your team., • Identify and report potential safety hazards, concerns, or incidents immediately., • Communicate and work with team members to coordinate tasks and maintain a productive work environment., • Regular and punctual attendance. Qualifications and Requirements: • Experience in construction or a related field (preferred)., • OSHA 10 certification., • Ability and willingness to work at heights and outdoors in various weather conditions., • Ability to walk, stand, balance, stoop, kneel, crouch or crawl, sit, climb, work in challenging environments and on uneven surfaces, and perform physically demanding tasks, including lifting heavy materials (up to 50 pounds)., • Ability to remain alert and see, hear, and respond to team members and the surrounding environment in highly safety sensitive working conditions and near large heavy civil equipment and/or live traffic., • High school diploma or equivalent., • Excellent teamwork, communication skills and ability to follow instructions., • Reliable transportation to and from construction sites., • Commitment to maintaining a safe working environment for yourself and others. To learn more about the Laborers Local 1290 and related apprenticeships, please visit www.gkcltc.org. To learn more about the Laborers Local 663 and related apprenticeships, please visit www.lu663members.org. Clarkson Construction is an Equal Opportunity Employer (EOE). We provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disabled status or any other legally recognized status entitled to protection under applicable federal, state, or local law.

Job Description Our Driver/Operators have the potential to make $80,000 to $100,000+ per year! *We highly value our employees in this role and want to prove it to you. Get hired onto our Emergency Response team and receive a $2,000 SIGN-ON BONUS!* NO DEGREE REQUIRED CDL DRIVER/OPERATOR | ESSENTIAL RESPONSIBILITIES: • Drive and operate a variety of commercial motor vehicles for scheduled or emergency response projects, • Perform various hands-on work using hand and power tools, • Work in a safe and healthy manner in accordance with established safety and OSHA requirements, • Care for and perform light maintenance of tools and equipment to maintain their proper operation CDL DRIVER/OPERATOR | POSITION TYPE AND EXPECTED HOURS: • Full-time position, • Ability to work flexible hours with some weekend and holidays required. Home Most Evenings and weekends!, • Travels occasionally CDL DRIVER/OPERATOR | EDUCATION AND EXPERIENCE: • Class A or B CDL with ability to obtain tanker endorsement - required, • Three (3) years of heavy equipment operation, general labor or construction experience - preferred, • HAZMAT endorsement – preferred CDL DRIVER/OPERATOR | WORK ENVIRONMENT: Exposure to harsh conditions such as dust, fumes, chemicals, hazardous materials, noise, and varying weather and temperatures for periods of time is possible. Employee is regularly required to walk, stand, use hands and fingers, grip, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk and hear. Ability to regularly lift and carry 50 pounds. BENEFITS • 1650/3300* Deductible Health Insurance Plans Available, • 3300 includes Health Savings Plan (HSA) Company Contribution with Employee Contribution, • Dental, • Vision, • Health Savings Account (HSA), • 401k | Up to 4% Company Match ADDITIONAL BENEFITS • Tuition Reimbursement, • Career and Personal Development Resources and Training, • Safety Boot Reimbursement, • Gym Membership Reimbursement, • Company Cell Phone, • Company paid lodging and per diem, • Retention Bonus, • Company paid lodging and reimbursable per diem EEO: Environmental Works, Inc. is committed to maintaining a workplace that is free from discrimination on the basis of race, gender, religion, color, national origin, sexual orientation, age, marital status, veteran status, disability status, or any other characteristic protected by federal, state, or local laws. We strive to create a diverse and inclusive work environment where all employees are treated with kindness and respect. #IND1CDL

Job DescriptionHiring Immediately | Weekly Pay + Daily Tips | Flexible Scheduling All My Sons Moving & Storage is looking for energetic, dependable Helpers to join our professional moving team. If you enjoy staying active, working with great people, and getting paid weekly plus daily tips, this opportunity is for you! Pay & Earnings: • $16–$19 per hour (based on experience), • Paid Weekly, • Daily Tips: Earn an additional $20–$150+ per day, • Opportunity for advancement and increased earnings Scheduling: • Flexible scheduling, • Full-Time, • Part-Time, • Weekends Only Perks & Benefits: • Modern fleet of beautiful branded 26-foot moving trucks, • Team-oriented environment, • Stay active and get paid to work out! What You'll Do: • Load, unload, and move furniture and household goods, • Protect customer belongings during transport, • Work alongside a professional moving crew, • Deliver exceptional customer service, • Stay active in a fast-paced work environment Requirements: • Must be 18 years of age or older, • Able to safely lift and move 75+ lbs, • Ability to climb stairs daily, • Positive attitude and strong work ethic, • Reliable and dependable Ready to Get Started? Apply today and pre-qualify within minutes! Hiring Now | Movers | Helpers | General Labor | Warehouse | Construction Labor | Immediate Openings | Weekly Pay | Daily Tips | Flexible Schedule Powered by JazzHR 2SXjNTPCxz

Job Description Job Title: Commercial Roofing Superintendent Start Date: Immediately Salary Range: $40-$55/Hour DOE Position Overview: The Superintendent oversees roofing construction activities such as project planning, scheduling, and budgeting while improving the accountability and efficiency. The Superintendent is responsible for the overall outcome of projects. At JR & Co Inc we're not just building roofs—we're building careers. We specialize across a full range of building envelope services, including commercial roofing, architectural cladding (sheet metal), glass and glazing, solar panel installation, rooftop maintenance, and disaster relief. Established in 1986 and proudly veteran-owned, we're an energetic, optimistic, and family-oriented construction company based out of Kansas City. With a reputation for excellence in workmanship and customer service, we’ve earned recognition from top industry manufacturers and an A+ rating from the BBB. If you're looking for a place to grow, thrive, and make a real impact while working in a safety-focused, supportive environment, J.R. & Co., Inc. is the place for you. Join our team today and help us build something great! Essential Job Functions: • Lead and manage commercial roofing crews and subcontractors to deliver safe, high‑quality, on‑schedule work., • Maintain daily jobsite presence to oversee safety, quality, production, and progress., • Enforce OSHA and company safety standards; stop work when unsafe conditions exist., • Plan and coordinate labor, materials, equipment, and subcontractors to avoid delays and inefficiencies., • Partner with Project Managers and Foremen to align scope, schedule, and execution., • Proactively solve jobsite issues to control costs, schedules, and quality., • Track project progress, labor hours, and percent complete; provide timely reporting for billing., • Maintain clear documentation, photos, and weekly project reports., • Coordinate with Quality Control, Safety, inspectors, and manufacturers as needed., • Identify potential change orders and communicate impacts immediately., • Perform final quality walkthroughs prior to demobilization., • Manage multiple projects while maintaining customer satisfaction and company standards., • Complete projects safely, on time, and within budget. Supervisory Responsibilities: • Supervision of crews while on the job including training, accountability, etc., • Communication with Operations Manager for personnel management. Required Skills and Abilities: • Proven experience with commercial roofing systems (TPO, EPDM, PVC, tapered systems, shingles, WV, FA). OSHA 30 certification (or ability to obtain quickly). • Valid driver’s license (MO Class E or equivalent) and DOT MedCard., • Strong leadership skills with the ability to manage crews, resources, and multiple projects., • Ability to read and interpret architectural plans, shop drawings, and specifications., • Detail‑oriented, accountable decision‑maker with solid time management skills., • Professional, effective written and verbal communication., • Aligns with company values: Family Culture, humility, ownership, and continuous growth. Education and Experience: • High School Diploma and GED, • 5-10 years in construction and roofing related industries, • 2 years of team management experience Work Environment/Physical Requirements: • Pass initial drug test and participate in random drug test program, • Primarily outdoor office environment (approximately 20% office), • Some outdoor environments in all types of weather (approximately 70% fieldwork), • Ability to perform elevated work (work on rooftops, heights), • Frequently lift and carry 50lbs or greater, • Frequent bending, kneeling, walking, • Overtime and weekend work Compensation Package: • Weekly pay, • Phone stipend, • Company truck and fuel card or stipend and fuel card Benefits: • Health, dental, vision, life insurance, • HSA/FSA eligibility, • Paid time off, • 401(k) plus company match, • Fringe Benefit sub-plan (where applicable), • Paid Parental Leave Location/Schedule • In Person: Kansas City, MO, • Day Shift: Mon-Fri J.R. & Co., Inc. is proud to be an equal opportunity employer, committed to building a diverse and inclusive workforce. JR & Co. Inc. participates in E-Verify. To learn more visit www.e-verify.gov. All individuals who accept an offer of employment are required to complete a pre-employment drug screening and background check.

Job Description Summary: Dredge America’s core focus is improving quality of life through innovative environmental dredging solutions and our team is what makes that possible. The Deckhands duties include ensuring a well-maintained worksite for the crew while maintaining a harmonious relationship with the Superintendent, Operator, other Deckhands, Laborers, Interns and any other crew members onsite. Adaptability is critical in this role. Primary Role: The basic function of a Deckhand is to assist the Operator in achieving maximum production possible while taking care of the equipment and working in a safe manner at all times. Below is a list of the primary duties that will be covered under this role. • Models the Dredge America values: Committed to do the right thing with a can-do-attitude., • Ensure dredge is clean and well maintained., • Ability to communicate with all DA team members and superiors., • Perform basic manual labor tasks., • Operate land-based support equipment such as forklift, skid-steer, excavator, etc., • Operate all work boats, anchor scows, trash pumps and booster pumps., • Utilize proactive approach to completing job specific tasks., • Perform daily grade checks for Operator., • Participate in daily safety meetings., • Perform daily equipment inspections and document findings utilizing equipment report forms. Notify Operator of any issues., • Ability to cut up, load and fuse pipe., • Ability to perform basic mechanical repairs. Education/Experience: • Minimum of 1 year experience is preferred., • Technical training or graduation from a technical school is a plus., • Training in heavy and marine equipment is a plus., • Experience in other industries with job similarities such as farmhands and other marine and heavy construction related industries. Skills: • Ability to weld and fabricate would be beneficial., • Working knowledge of the occupational hazards and safety precautions of working on and around heavy equipment., • Ability to work effectively and establish good working relationships with others., • Ability to engage in heavy manual labor for extended periods, in all types of weather, and under various working conditions. Able to lift 50 pounds., • Basic computer skills with Word, Excel and Outlook. Other: • 100% travel is required., • 12-hour days/7 days a week/3 week on 1 week off rotation schedule. This may include overtime, nights, weekends, and holidays., • Able to live with crew members in project lodging, i.e. hotels, rental homes, rental apartments, etc., • Valid driver’s license., • Clear driving record., • Reliable source of transportation., • Able to pass a background check and drug screen., • Must be 18 years or older., • Authorized to work in the US., • Ability to travel throughout the United States., • Comfortable around water.

Job Description Foreman – Commercial Construction Brighten Builders is looking for an experienced commercial construction Foreman to lead field crews on Kansas City area job sites. Candidates must be current union members in good standing and have experience with metal studs, drywall, framing, rough carpentry, blocking, doors/frames/hardware, ACT, and general interior construction work. Responsibilities include: Lead and manage field crews Read plans, drawings, and specifications Coordinate daily work with the GC, superintendent, and Brighten Builders team Track labor, materials, progress, and jobsite issues Maintain quality, safety, and jobsite organization Communicate schedule concerns, material needs, and changes Work hands-on when needed Qualifications: Must be a current union member in good standing Commercial construction experience required Foreman or crew lead experience preferred Ability to read plans and lead a crew Reliable, organized, and professional Valid driver’s license and transportation preferred Job Type: Full-time Location: Kansas City area job sites

Job Description **Rebuilding America Starts Here: Custom Truck One Source “CTOS” designs, assembles, sells, rents, and services trucks, cranes, and other heavy equipment. Our clients include some of the largest utilities, telecom, construction, forestry, oil, and rail companies in the nation **Summary: Primary responsibility is to perform vehicle troubleshooting, repair and maintenance work on chassis and track mounted aerials, digger derricks, cranes, high rail, and other equipment, in accordance with dealer and factory standards, in the field. **Essential Duties and Responsibilities: Reports to Service Manager, who will provide brief description of issues and supporting information related to the vehicle. Read and interpret equipment manuals and repair orders/instructions to perform required maintenance and service. (Must have the ability to utilize laptop, etc. to be able to access needed information and perform diagnostic tests.) Performs work as outlined in work instructions set forth by Service Manager; efficiently, accurately, and in accordance with Custom Truck One Source standards. Diagnosis and repair LMI Diagnostics (Load Moment Indicator) and CAN bus (Controller Area Network) Experience troubleshooting and repair of Utility trucks & Equipment including electrical and hydraulics. Inspects and services vehicles and makes repairs and adjustments both at the service center and in the field. Verify work performed, road test vehicles as necessary. Prepare inspection reports, repair orders (recording service time and parts costs) and timecards completely and accurately. Tag all warranty and core parts for return. Advises management immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the time promised. Attends CTOS safety training and follows all safety requirements. Attends CTOS and factory -sponsored training classes. Understand and follow federal, state and local regulations such as those governing the disposal of hazardous wastes. Communicate easily with customers and internal departments to ensure minimal equipment downtime. Flexibility to travel beyond the area of coverage, based on business need. Work closely with Service Manager to grow and improve customer satisfaction. Additional duties or responsibilities as designated by the Service Manager. **Preferred Skills: Electrical, schematic / blueprints, hydraulic, welding, and related experience Experience with Quick Serve, DTNA, or related diagnostic software. DOT, ANSI, and Dielectric testing desired **Requirements: High School diploma or GED. Five years of related experience. (Shop Tech and Field Tech) Must hold a valid CDL driver’s license. (Class A or B) Must have your own tools. Proficient in documentation using software, meeting deadlines and schedules. **Mental/Physical Requirements: Ability to regularly work in outside weather conditions, including wet and/or humid conditions. The employee is occasionally exposed to extreme cold, and extreme heat. The noise level in the work environment is usually moderate to loud. Positive attitude, professionalism, Punctual attendance. Physical capability for lifting, carrying, pushing, and pulling. The ability to bend, stoop, and lift, up to 50 lbs. Comfort with heights and manual labor. Manual dexterity for operating tools and equipment. **Benefits: 401(k) with Employer Match Competitive Health Care including Dental, Vision, and Life Insurance Company paid health and wellness programs Paid Vacation, Sick and Holidays STD/LTD Partner Discounts (Tool Discount Programs) Investment in Employee Development including https://www.customtruck.com/careers/step **Custom Truck One Source is an Equal Opportunity Employer Please note that we do not offer sponsorship for work authorization. Only candidates authorized to work in United States without the need for sponsorship will be considered for this position. You should be proficient in: • Heavy Equipment Repair, • Diesel Engine Systems, • Light Vehicle Diesel Engines, • Diesel & Heavy Equipment Systems, • Electrical Systems & Diagnostics (Heavy Equipment), • Aerial & Utility Equipment Systems, • Current CDL License, • DOT & Equipment Inspection Compliance Machines & technologies you'll use: • Diesel Vehicles, • Crane (Manitowoc, Terex), • Boom Truck (Terex, Elliott, Load King, National Crane), • Digger Derrick (Terex), • Aerial Devices (Versalift), • Boom Crane, • Refuse Truck, • Hi-Rail Truck, • Power Take-Off (PTO), • After Treatment Systems (DPF, DEF) (Detroit Diesel, Cummins)

Job Description This role is with Seneca Companies Inc., an OWL Services Affiliated Company Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. Job Title: Carpenter Job Description: Responsible for constructing, repairing, and installing structures and fixtures made of wood, plywood, and other materials. This role requires precision, attention to detail, and the ability to follow blueprints, building codes, and safety regulations. Install finish wall paneling and set cabinetry. What You'll Do: • 25%: Measure, cut, and assemble wood and other materials according to project specifications. Read and interpret blueprints, drawings, and technical instructions., • 25%: Install frameworks such as walls, floors, and doorframes, as well as fixtures like cabinets, shelves, and molding. Repair and replace damaged structural elements and fixtures., • 20%: Operate hand and power tools safely and effectively. Maintain tools, equipment and company vehicle in good working condition., • 10%: Ensure all work meets building codes, safety standards, and project requirements. Collaborate with other tradespeople, contractors, and team members to complete projects efficiently., • 10%: Adhere to OSHA workplace safety guidelines and regulations., • 5%: Travel to and from jobsites on their own while maintaining punctuality. Overnight travel required., • 5%: Other duties as assigned., • Working Hazards: Works in an environment with potential exposure to fumes, dirt, noise, equipment movement dangers, vibrations, dangerous chemical/solvents, electrical shock, and inclement temperature extremes., • Physical/Mental Exertion: Ability to perform heavy physical labor exerting up to 100 pounds of force on an occasional basis and up to 50 pounds of force on a frequent basis performing such tasks as climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, and grasping. Ability to drive for extended periods of time each day with possible overnight stays. What We're Looking For: • Education: Requires a high school diploma or its equivalent., • Experience: 0-2 years of experience in the field or in a related area., • Licenses/Certifications: Requires valid driver's license, state-issued CDL preferred., • Technical Abilities: Knowledge of materials, methods, and the tools involved in the construction or repair of buildings and other structures, good mathematical skills and mechanical abilities. Ability to perform manual construction work and equipment operation., • Autonomy/Direction: Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision., • Tools and Equipment: Ability to perform manual construction work and equipment operation as described. Knowledge and experience with computer programs (Procore, Outlook preferred) Why Choose OWL Services? • Competitive Pay & Per Diem, • Company Vehicle & Fuel Card, • Paid Time Off including Vacation Time, Sick Days, Personal Days, and Holidays, • Health, Dental, and Vision Insurance with optional offerings of HSA and FSA, • 401k with Company Match, • Tuition Reimbursement, • Free Employee Assistance Program (EAP) and Wellness Program This job description is intended to describe the general nature and level of work being performed by the person assigned to this position. Principal duties and responsibilities are intended to describe those functions that are essential to the performance of this job, and “other” duties and responsibilities include those that are considered incidental or secondary to the overall purpose of this job. This job description does not state or imply that the above are the only duties and responsibilities assigned to this position. Employees holding this position will be required to perform any other job-related duties as requested by management. All requirements are subject to possible modification to reasonably accommodate individuals with a disability. Requisition #4057

Job DescriptionHelp Keep Our Roads Safe. Heartland Traffic Services (HTS) is looking for motivated and reliable Crew Members to join our team. As a Crew Member, you will play a crucial role in maintaining road safety and infrastructure. If you're hardworking, dependable, and enjoy hands-on work outdoors, we'd love to hear from you. About Heartland Traffic Services Heartland Traffic Services provides roadway safety services with a focus on quality work, safe operations, and dependable service. Heartland Traffic Services is proud to be an operating company of Road Safety Services (RSS), one of North America's leading providers of pavement marking and traffic control services. With operations across 23+ states and more than 50 locations, RSS combines the strength of a national organization with the expertise of its local operating companies. Whether it's 500 feet or 500 miles, we get the job done safely, properly, and on time. What You'll Do • Road Striping and Pavement Marking: Assist in applying road markings, including lane lines, crosswalks, and symbols, using specialized equipment., • Traffic Control: Set up and maintain traffic control devices during road construction and maintenance projects., • Equipment Operation and Maintenance: Operate and perform basic maintenance on CDL required vehicles, such as trucks and striping machines., • Physical Labor: Perform manual tasks, including lifting, bending, and working outdoors in various weather conditions., • Safety Compliance: Follow safety protocols and guidelines to ensure a safe work environment.What We're Looking For, • Valid Driver's License with a clean driving record; Class A or B, CDL a plus., • Ability to work independently and as part of a team., • Strong work ethic and attention to detail., • Prior experience in road construction, striping, or traffic control is a plus., • Ability to work nights, weekends, and meet shifting demands is necessary.Why Join Heartland Traffic Services?, • Hands-on work that directly supports road safety and infrastructure, • Opportunity to build experience in pavement marking and traffic control, • Work with specialized pavement marking and traffic control equipment, • Team-focused, safety-driven environment, • Backed by the strength and resources of Road Safety Services If you're motivated, reliable, and ready to help maintain safer roads and infrastructure, apply today! HTS is an Equal Opportunity Employer. Job Posted by ApplicantPro

Job Description Founded in 2010, Centric has grown into one of the most recognized general contractors in Kansas City and is active in its business, civic, and philanthropic communities. The company serves the workplace, retail, healthcare, institutional, industrial, hospitality, multi-family, and single-family residential markets, and has grown to 165 associates and $230 million in revenue from its home in Kansas City’s Crossroads Arts District. Most importantly, Centric prides itself on helping make Kansas City a cooler place to live, work, and play by building our city and its stories...from the ground up. Position Objective The Carpenter position performs various field labor tasks during the construction phase of Crossroads Construction projects. Essential Job Functions • Perform basic labor and/or carpentry tasks at a job site or in regard to a special project assignment, • Measures, marks, and arranges materials to layout based on blueprints or instructions from the supervisor, • Assists in solving problems related to layout, conflicts, coordination with other trades, and prefabricated panel system installation., • Maintain a construction site that is well-organized and clear of debris, • Load and unload construction materials to assist in job site progress, • Use various hand and power tools to securely build assigned projects, • Joins materials with the most appropriate nail, screw, staple, or adhesive, • Utilize light industrial equipment to complete larger labor tasks as directed by the onsite Superintendent or other members of field management, • Erects and dismantles scaffolding, • Installs windows and doors, • Utilize knowledge of all local, state, and federal safety regulations to ensure labor tasks are completed in a safe manner Qualifications and Requirements Basic Qualifications • High school diploma or GED required, • A valid driver’s license is required, • OSHA-10 certification is required within 30 days of employment, • Two (2) years of previous work experience in a construction-related field Knowledge, Skills, and Abilities • Ability to understand directions and read blueprints, • Ability to properly care for and use tools of the trade, • Works well as part of a team, • Demonstrates an ability to prioritize tasks, • Strong initiative and is able to accomplish tasks with minimal manager supervision, • Maintains composure and professionalism in difficult situations and effectively resolves conflicts, • Demonstrates innovative problem-solving and is able to consider all facts of the matter to be resolved, • Embraces technology and is able to use it in ways that improve the experience of Centric associates Physical Requirements The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of is job. The work environment characteristics described here are typical of those encountered while performing the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods of standing, climbing, bending and kneeling, • Must be able to lift up to 75 pounds at a time, • Must be able to work with sharp tools or power equipment, • Must be able to work in a variety of weather conditions and terrains, • Must have manual dexterity, a good sense of balance, and excellent hand-eye coordination Superior Benefits Package • PTO, • 100% Employee-owned!, • One month Sabbatical after seven years of continuous service, • Affordable, quality medical, dental, and vision insurance, • HSA with company match, • Company-paid life and disability insurance, • 401k plan with company contributions, • 529e college savings plan with company contributions, • Tuition reimbursement, • Student loan repayment assistance Centric is an equal opportunity employer. All applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job DescriptionLead CarpenterLove leading remodeling projects, but tired of feeling like you have to do everything yourself?At Schloegel Design Remodel, you'll lead projects with the full support of a team around you, so you can focus on leading the job, solving problems and delivering a great experience without carrying every part of the business on your own.Why Schloegel (It's about more than just the work.)With over 45 years in business, Schloegel Design Remodel is a leader in Kansas City's remodeling industry. But we're most proud of being named a Best Place to Work by the Kansas City Business Journal. That recognition is based entirely on feedback from our team.Here's what that means for you:We Have Fun & Stay OptimisticWe take our work seriously, but we keep perspective. We celebrate wins, help each other through challenges, and create an environment where you actually enjoy showing up. We Are EngagedYou aren't just a number. We stay connected, welcome ideas, and believe strong communication makes both the client and team member experience better. Planned for Success"Design Done Right" isn't just for our clients. Clear processes, strong communication, and detailed systems help our team stay organized and deliver the experience our clients expect. Why You'll Love This RoleYou'll Lead the ProjectYou'll have ownership of the day-to-day job site, from schedules and subcontractors to client communication and problem solving. You're not simply being handed a task list. You're helping drive the project and have the satisfaction of seeing it through from the first day of construction to the finished space. You'll Have a Team Behind YouYou aren't expected to do everything yourself. Our design, production, accounting and office teams handle the pieces behind the scenes so you can focus on leading the project and keeping the work moving. Your Experience Is Valued The best Lead Carpenters understand construction, but they also know how to lead people, anticipate issues and communicate well with homeowners and trades. We want that experience at the table.You'll Work With People Who Take the Work Seriously Quality matters here. So does doing what we say we're going to do, communicating well and treating clients, trade partners and one another with respect.What You'll DoTake ownership of the day-to-day job site and serve as Schloegel's on-site project lead.Be the primary point of contact for homeowners during construction, keeping them informed and helping them feel confident in what's happening next.Oversee the daily progress of the job while performing rough and finish carpentry as needed.Manage project schedules and work closely with Project Directors to keep projects moving.Coordinate subcontractors, vendors and in-house team members.Stay ahead of project needs by reviewing plans, selections, change orders, materials and upcoming work.Maintain Schloegel standards for craftsmanship, job site safety, cleanliness, security and protection of the client's home.Hold subcontractors, vendors and in-house labor accountable to project expectations.Use Buildertrend to keep project information, schedules, communication and documentation accurate and up to date. What We're Looking ForYou know remodeling. You understand that working in an existing home takes a different kind of planning and problem solving than new construction.You take pride in craftsmanship and notice the details other people might miss.You can lead a job site. You're comfortable coordinating trades, communicating expectations and keeping people moving in the same direction.You communicate well. Homeowners, subcontractors and team members know what's happening because you keep them informed.You're a problem solver. You proactively identify potential issues, bring forward solutions and work with the team to keep challenges from slowing the project down.You take ownership. You don't need someone standing over your shoulder to make sure things get done.You're also a team player. You know when to make the call and when to pull in the Project Director or another member of the team.You follow through. If you say something is going to happen, people can count on you. Additional QualificationsFive or more years of remodeling experience preferred.Strong knowledge of rough and finish carpentry.Working knowledge of the different trades involved in residential remodeling.Ability to read and understand plans, specifications and project documentation.Strong client and subcontractor communication skills.Comfortable learning and using technology such as Buildertrend. Your ScheduleOur typical workday is 8:00 a.m. to 4:30 p.m., Monday through Friday.Remodeling sometimes requires flexibility to meet project commitments, but we believe having a life outside of work matters too. Our systems, planning and team structure are designed to help projects stay on track without making chaos the normal way of doing business. Benefits That Set Us ApartHealth, Dental and Vision Insurance401(k) with Company Match7 Paid Holidays + VacationPotential Company-Wide BonusIncentive PlansTool and Travel Allowances, where applicableOngoing Training and CertificationsOpportunities for Professional GrowthA team and workplace recognized as one of Kansas City's Best Places to WorkCompensation$28.00–$32.00 per hourReady to spend more time doing the work you're good at?If you're an experienced remodeler looking for challenging projects, a strong team behind you and a place where your experience is valued, we want to talk to you.Running your own remodeling business? Bring the experience. We'll bring the team. Job Posted by ApplicantPro

Job Description Clarkson Construction Company is a leading firm in the heavy civil construction industry, with a proud history of delivering complex infrastructure projects across the Kansas City region. Our portfolio spans grading, paving, and bridge construction, underscoring our commitment to excellence and innovation. Clarkson Construction Company offers a supportive and dynamic work environment where innovation and hard work are recognized and rewarded. We believe in investing in our employees through professional development and advancement opportunities. Join us and be a part of a team that shapes the infrastructure in and around one of America's most vibrant cities. We are currently seeking a Structures Estimator to join our dynamic team and contribute to our legacy of building the foundations for future generations. Job Summary: The Estimator will play a crucial role in our project planning and execution phase, focusing on cost estimation, bid proposal preparation, and the initial stages of project management for bridge construction projects. This position requires a combination of technical knowledge, analytical skills, and effective communication to ensure accurate and competitive project bidding. Essential Functions / Responsibilities: • Estimation & Bidding: Prepare accurate and competitive cost estimates for bridge construction projects by analyzing project drawings, specifications, and other documentation. Develop preliminary project schedules., • Project Analysis: Conduct thorough reviews of potential projects to determine feasibility, risk, and profitability. Collaborate with the project management team to align project objectives and strategies. Compile project risk matrix and formulate risk mitigation strategies., • Vendor & Subcontractor Solicitation & Coordination: Liaise with vendors and subcontractors to solicit and evaluate bids, ensuring all estimates include up-to-date pricing and availability of materials and labor. Perform quote comparisons and make recommendations for selection., • Client Interaction: Engage with clients during the bidding process to clarify project requirements, adjustments, and to foster strong professional relationships. Present and explain project proposals to clients, designers, and operations teams., • Documentation & Reporting: Maintain detailed records of all estimations, bids, and initial project specifications to ensure transparency and accuracy in project initiation. Assist in oversight of historical cost database, bid management, and estimating software., • Collaboration: Work closely with the project management, engineering, and construction teams to ensure seamless project transitions from estimation to execution. Qualifications Requirements: • Bachelor’s degree in Civil Engineering, Construction Management, or a related field., • Experience with estimation software (e.g., Agtek Gradework, Highway, Underground and Materials, AutoCAD, HCSS HeavyBid, and/or Bid2Win, Bluebeam Revu), • Proficient in Excel and Microsoft Office Suite., • Strong understanding of construction processes, materials, and the latest industry standards., • Excellent analytical, organizational, and negotiation skills., • Excellent written and verbal communication skills., • Excellent interpersonal skills., • Capable of working in a team environment and handling client interactions professionally., • Able to manage multiple bids and projects simultaneously under tight deadlines. Clarkson Construction is an Equal Opportunity Employer (EOE). We provide equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, national origin, ancestry, citizenship, age, mental or physical disability, pregnancy, sex, marital or domestic partnership status, veteran status, sexual orientation, gender identity, genetic information, or any other characteristic protected by applicable federal, state or local law, ordinance or regulation.

Job DescriptionHIRING ASAP Production Technician | $21 - $23 / hr | Intermediate Level | Start ASAP | Multiple Positions Job Description This role focuses on operating, monitoring, and maintaining printing machines within a fast-paced production environment. You will ensure that equipment runs safely and efficiently, produce high-quality products, and support continuous production by performing basic troubleshooting and preventative maintenance. Candidates with 23 years of machine operating experience in a manufacturing or production setting are encouraged to apply! Responsibilities • Start up, operate, and shut down printing machines safely and efficiently., • Monitor machine performance throughout production runs to ensure consistent output., • Make machine adjustments to maintain product quality and meet production standards., • Troubleshoot basic mechanical and operational issues to minimize downtime., • Unjam machinery and clear minor equipment malfunctions as needed., • Perform routine machine inspections and basic preventative maintenance., • Monitor product quality and make necessary corrections during production., • Follow production schedules and meet established output and efficiency goals., • Use hand tools and other basic equipment to support production and maintenance tasks., • Assist with general production duties such as packing, general labor, and assembly line work as needed., • Maintain a clean, organized, and safe work area at all times., • Adhere to all company safety policies, quality procedures, and standard operating instructions. Essential Skills • 23 years of machine operator experience in a manufacturing, production, or printing environment., • Proven ability to start, stop, and adjust machinery independently., • Experience troubleshooting equipment and resolving machine jams., • Mechanical aptitude with strong problem-solving skills., • Ability to read and follow work instructions and operating procedures., • Capability to lift up to 50 pounds and stand for extended periods., • Strong attention to detail and commitment to product quality., • Experience in general production activities such as production work, general labor, assembly, assembly line operations, packing, and use of hand tools., • High school diploma or GED preferred. Additional Skills & Qualifications • Prior experience operating printing or dry offset machinery is a plus., • Comfort working with basic hand tools to support machine setup and minor adjustments., • Ability to work effectively in a team-oriented production environment., • Strong reliability, punctuality, and willingness to learn new equipment and processes. Why Work Here? You will join a production environment that values safety, quality, and continuous improvement. The team-oriented culture encourages collaboration, learning, and skill development, particularly for those looking to grow their experience with specialized printing equipment. You can expect a stable work setting with clear procedures, structured schedules, and opportunities to build your technical and mechanical capabilities over time. Work Environment This position is based in a manufacturing and production facility that operates dry offset printing machinery and related equipment. You will work on or around assembly lines, perform general production and packing tasks, and regularly use hand tools. The role requires standing for extended periods, lifting up to 50 pounds, and working in a fast-paced environment that follows defined production schedules. Safety and cleanliness are priorities, with established safety and quality procedures that must be followed at all times Job Type & Location This is a Contract to Hire position based out of Lee's Summit, MO. Pay and Benefits The pay range for this position is $21.00 - $23.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Lee's Summit,MO. Application Deadline This position is anticipated to close on Oct 12, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description U.S. Engineering has been an industry leader through constant innovation and a willingness to evolve. The construction industry changes rapidly, and we cultivate a dynamic workplace where even our newest team members can influence change and make an impact. We know that our most valuable asset is our people. Join us! DIRECTOR – MECHANICAL CONSTRUCTION OPERATIONS In any given year, our people have a hand in installing, maintaining, or operating hundreds of large mechanical systems – or supporting those that do. With each of those, there’s a story that is affecting people’s lives. That’s a responsibility we take very seriously, and it’s why we are driving innovation and disrupting the way people think about construction and facility service. The Operations Director is a vital part of the U.S. Engineering Innovations team and is responsible for overseeing the profitability and overall success of assigned project teams. Additionally, the Operations Director holds broader leadership responsibility for the overall success of the company and, as such, is a cultural champion, executes on the strategic plan, develops talent, leads positive change, and continuously contributes quality improvement. Principal Duties and Accountabilities: • Responsible for the effective management and leadership of the assigned site team(s). Scope includes recruitment and selection, performance management, learning and development, mentorship, succession planning, and administration of human resources policy and procedure., • Responsible for building and fostering effective relationships with project owners, primary clients, general contractors, subcontractors, vendors, etc. to leverage business opportunities., • Responsible for overall profit management of assigned projects., • Monitor key performance indicators (KPIs) throughout the lifecycle of every project. Execute course corrections when KPIs signal below average project performance. Oversee creation and execution of project recovery plans when necessary., • Ensure project goals are established at the start of each new project. Project goals to include profitability, manufacturing target percentage, cash flow, and customer satisfaction., • Responsible for team development of on-site plans and effective execution of that plan during the project lifecycle. This includes collaboration with the U.S. Engineering Innovations off-site manufacturing and project development teams., • Assist with yearly budget preparation, quarterly updates, and formulation of the regional business plan. Monitor revenue within the assigned project management group and adjusts staff when necessary to maintain or exceed business plan goals., • Assist with all stages of the project procurement process through contract review, scope and specification review, constructability review, labor impact factoring, manufacturing strategies, formulating general conditions, risk analysis, and interview preparation for all assigned projects., • Ensure all projects within assigned group execute pre-planning and risk mitigation workflows including estimating turnover, management review, manufacturing plan, cash management plan, buyout plan, project schedules, productivity tracking, job audits, debriefs, etc., • Responsible for evaluation of manufacturing execution methods for efficiency, cost impacts, technology advances, and quality control and assurance., • Review and approve profit forecasts for all projects within assigned team utilizing the forecast review procedures. Provide Operations VP with monthly updated WIP information and project risk/opportunity analysis for all assigned projects., • Oversee the review, negotiation, and execution of all contracts and subcontracts for assigned project group. Review all change orders and lien releases prior to execution., • Responsible for ensuring all projects within business unit are in full compliance of the safety program and aligned with desired safety culture. Regularly partners with Safety Director to ensure continuous quality improvement in safety programs as needed., • Identify opportunities for future projects and networks internally and externally to pursue such opportunities., • Gather, organize, and document project historical data and “lessons learned” to aid in the company’s productivity and project quality monitoring., • Work collaboratively with peers to participate in community or philanthropic activities. Education: • Bachelor’s Degree in Construction Science Management, Architectural Engineering, Mechanical Engineering, or Business Management preferred., • Equivalent combination of field and leadership experience will be considered. Experience: • Extensive experience in construction industry – minimum of 15 years., • Prior experience as top-level manager overseeing projects, schedules, budgets, and teams., • Experience as a member of a senior leadership and/or strategic planning team. Knowledge, skills, and abilities: • Excellent leadership and communication skills; proven collaborator able to establish and foster effective professional relationships, internally and externally., • Ability to articulate message, to be persuasive, and explain position to target audiences who may possess varying levels of technical knowledge., • Extensive knowledge of mechanical construction industry practices, processes, and standards., • Able to build and develop high performance project teams through innovative and effective management techniques., • Able to work autonomously but within parameters of corporate policy and standards., • Excellent time management and organizational skills., • Ability to adapt effectively to changing priorities., • Ability to identify and research potential opportunities, assist with procurement strategies, and leverage knowledge gained during the pre-award process to win proposal competitions., • Strong presentation and public speaking skills., • Strategic and innovative thinker who can envision the future and lead and manage change efforts when necessary., • Customer focus; dedicated to meeting the expectations of internal and external customers by gaining their trust and delivering results., • Ability to travel extensively to all job sites. Benefits and Compensation: • The range for this position has been established at $153,120.00 - $216,500.00 and is US Engineering Innovations’ good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be set based on a variety of factors, including but not limited to, internal equity, experience, education, specialty, and training., • Your total compensation will go beyond the number on your paycheck. Team members are eligible for a year-end bonus based on company and/or individual performance as well as paid time off. An industry-leading benefits package including health, dental, and vision plans, matching retirement contributions, and matching 529 contributions all add to your bottom line.This position will be posted until August 15, 2026. To apply, please visit https://www.usengineering.com/careers/job-postings/. U.S. Engineering is an Equal Employment Opportunity Employer and shall provide equal employment opportunities to all people in all aspects of employer-employee relations, without regard to race, color, creed, national origin, religion, sex, age, sexual orientation, gender identity, disability, or veteran status. U.S. Engineering is compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. Equal Opportunity Employer, including disabled and veterans. #IND Powered by JazzHR AkwaY8VGtv

Job Description Who We Are This position is with Seneca Companies, an OWL Services Affiliated Company. OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. Title: Petroleum Systems Tester Job Summary: Perform several duties pertaining to fuel systems integrity testing. Primarily completes petroleum support work orders and jobs at retail, commercial and private fueling facilities. Shares results of testing and correction procedures with company partners and customers with speed and accuracy. Provide unbiased, fact-based results and correction advice on site to provide outstanding customer service. What You’ll Do: • 60%: Containment Testing: Performs a variety of fuel containment tests, equipment integrity tests, and leak-detection tests in order to detect leaks or to prevent future leaks due to non-compliance or equipment failure. Ensures all Seneca employees follow site and customer policies and procedures., • 15%: Site Inspection: Conducts inspections of equipment and sites referring to regulations, policies and customer requirements. Shares results of testing and correction procedures with company partners and customers with speed and accuracy. Provides unbiased, fact-based results and correction advice on site to provide outstanding customer service., • 10%: Training and field supervision: Provides direction, coaching and training to specialists, laborers and sub-contractors. Takes responsibility for all actions on a job site including safety., • 5%: Safety Management: Inspects, maintains and donns personal protective equipment. Ensures peers and subcontractors are protected and has the responsibility and authority to stop work deemed unsafe. Equipment inspection, maintenance and operation. Inspects equipment before and after operation and documents deficiencies in accordance with DOT regulations and company policy. May be assigned responsibility for a single company vehicle which includes responsibilities for routine maintenance and cleaning., • 5%: Mobile device-based administration and documentation: Utilizes mobile devices to plan, track and document job data including vehicle maintenance and operation, work order progress, personnel status and working hours. Responds to a variety of communication methods such as email, text messages, phone calls and application alerts in an appropriate time frame. Completes safety training and documentation on time., • 5%: Other duties as assigned., • Working Hazards: Works in an environment with potential exposure to fumes, dirt, noise, equipment movement dangers, confined spaces, vibrations, dangerous chemical/solvents, electrical shock, and inclement temperature extremes., • Physical/Mental Exertion: Ability to perform heavy physical labor exerting up to 100 pounds of force on an occasional basis and up to 50 pounds of force on a frequent basis performing such tasks as climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, and grasping. What We’re Looking For: • Education: Requires a high school diploma., • Experience: 4+ years of experience in the petroleum equipment field or in a related area., • Licenses/Certifications: HAZWOPER 40 certification and State-issued UST Inspector licenses required prior to hiring. CDL-B or A license with hazardous waste endorsement preferred. Manufacturer's certifications for Automated Tank Gauges, Submersible Turbine Pumps, Pressurized/Mechanical/Electronic line-leak detection preferred. Once hired, employees must maintain HAZWOPER40 and state-issued inspector's licenses., • Technical Abilities: Familiar with a variety of the field's concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. Performs a variety of complicated tasks. Able to perform manual labor, heavy equipment inspection and operation and basic administrative tasks using mobile devices., • Autonomy/Direction: A wide degree of creativity and latitude is expected. Trains and directs the activities of junior Technicians and is required to make quick decisions in the field without management assistance. Must have the ability to travel overnight over 50%. Must have the ability to be on-call 24-7 for emergency response on a rotational basis., • Tools and Equipment: Ability to perform manual construction work and equipment operation as described. Knowledge and experience with computer programs (PowerApps, Outlook). Why Choose OWL Services? • Competitive Pay, • Per Diem & Company Vehicle with Fuel Card, • Health, Dental, and Vision Insurance with optional offerings of HSA and FSA, • Paid Time Off including Vacation Time, Sick Days, Personal Days, and Holidays, • 401k with Company Match, • Company Paid Life Insurance, • Free Employee Assistance Program (EAP) and Wellness Program This job description is intended to describe the general nature and level of work being performed by the person assigned to this position. Principal duties and responsibilities are intended to describe those functions that are essential to the performance of this job, and “other” duties and responsibilities include those that are considered incidental or secondary to the overall purpose of this job. This job description does not state or imply that the above are the only duties and responsibilities assigned to this position. Employees holding this position will be required to perform any other job-related duties as requested by management. All requirements are subject to possible modification to reasonably accommodate individuals with a disability. Requisition #4053

Job Description:\n\nBlast It Clean is looking for dependable, hardworking individuals to join our team at our Kansas City Missouri location. This position is a great fit for someone who enjoys hands-on work, working as part of a team, and learning new skills in the industrial construction and coatings industry. Our crews perform industrial sandblasting, surface preparation, painting, and protective coating work for commercial and industrial clients. The work takes place in a variety of job-site environments, both indoors and outdoors. Employees should be comfortable with physically demanding work and working in different conditions throughout the year.\nWe value open communication, honesty, accountability, teamwork, and a strong work ethic. We are looking for individuals who show up ready to work, follow instructions, take safety seriously, and are willing to learn. Training will be provided on company procedures, safety requirements, equipment, sandblasting, painting, and coating processes. Previous experience in construction, industrial painting, sandblasting, or mechanics is a plus, but training is available for candidates who are motivated to learn. Familiarity with OSHA standards is required.\nA valid Missouri Non-CDL Class E driver’s license is required. Employees should also have reliable transportation for scheduled shifts. This position includes opportunities for overtime, performance-based pay, and out-of-town travel for certain projects.\n\nWhat We Offer\n\n \n Starting pay of $18 per hour plus overtime\n \n Starting pay of $21 per hour for candidates with a valid Missouri Non-CDL Class E license\n \n Performance-based pay opportunities\n \n Paid transportation, lodging, and per diem for approved out-of-town projects\n \n Hands-on training and opportunities to learn new industrial skills\n \n Opportunities for professional growth within the company\n \n A team-oriented work environment\n\nWhat We’re Looking For\n\n \n Dependable individuals with a strong work ethic\n \n Employees who communicate well and work effectively with a team\n \n Individuals who are willing to learn and take direction\n \n Employees who follow safety procedures and take pride in their work\n \n Candidates who are comfortable performing physically demanding work\n \n Individuals who are willing to work a flexible schedule based on project and client needs\n\nEn Español:\n¡Únete al equipo de Blast It Clean en Chicago!\n\nBlast It Clean busca personas responsables y trabajadoras para unirse a nuestro equipo en nuestra ubicación de Bridgeview, Illinois. Este puesto es ideal para alguien que disfrute del trabajo práctico, trabajar en equipo y aprender nuevas habilidades dentro de la industria de la construcción industrial y los recubrimientos.\nNuestros equipos realizan trabajos de sandblasting industrial, preparación de superficies, pintura y aplicación de recubrimientos protectores para clientes comerciales e industriales. El trabajo se realiza en diferentes lugares de trabajo, tanto en interiores como en exteriores. Los empleados deben sentirse cómodos realizando trabajo físicamente exigente y trabajando bajo diferentes condiciones durante todo el año.\nValoramos la comunicación abierta, la honestidad, la responsabilidad, el trabajo en equipo y una sólida ética de trabajo. Buscamos personas que lleguen preparadas para trabajar, sigan instrucciones, tomen la seguridad en serio y estén dispuestas a aprender.\nSe proporcionará capacitación sobre los procedimientos de la empresa, los requisitos de seguridad, los equipos, el sandblasting, la pintura y los procesos de recubrimiento. La experiencia previa en construcción, pintura industrial, sandblasting o mecánica es un plus, pero ofrecemos capacitación a candidatos con ganas de aprender. Se requiere familiaridad con las normas de OSHA.\nSe prefiere una licencia de conducir Clase E válida de Missouri. Los empleados también deben contar con transporte confiable para los turnos programados.\nEste puesto ofrece oportunidades de horas extras, pago basado en el desempeño y viajes fuera de la ciudad para ciertos proyectos. La empresa proporciona transporte, alojamiento y viáticos para los viajes de trabajo aprobados.\n\nLo Que Ofrecemos\n\n \n Salario inicial de $18 por hora más horas extras\n \n Salario inicial de $21 por hora para candidatos con una licencia Clase C válida de Illinois\n \n Oportunidades de pago basadas en el desempeño\n \n Transporte, alojamiento y viáticos pagados para proyectos aprobados fuera de la ciudad\n \n Capacitación práctica y oportunidades para aprender nuevas habilidades industriales\n \n Oportunidades de crecimiento profesional dentro de la empresa\n \n Un entorno de trabajo enfocado en el trabajo en equipo\n\nLo Que Buscamos\n\n \n Personas responsables con una sólida ética de trabajo\n \n Empleados que se comuniquen bien y trabajen eficazmente en equipo\n \n Personas dispuestas a aprender y seguir instrucciones\n \n Empleados que sigan los procedimientos de seguridad y se comprometan con la calidad de su trabajo\n \n Candidatos que se sientan cómodos realizando trabajo físicamente exigente\n \n Personas dispuestas a trabajar con un horario flexible según las necesidades de los proyectos y clientes\n\nSi eres una persona responsable, motivada y estás listo para desarrollar tus habilidades en sandblasting industrial, pintura y recubrimientos, ¡solicita hoy para unirte al equipo de Blast It Clean en Bridgeview, Illinois!Compensation:\n$18 - $41 hourly\nResponsibilities:\n\n Clarify the scope with clients, engineers, construction managers, and architects to produce an accurate list of project specifications, including manual labor needs and necessary materials\n Schedule construction operations and create a construction timeline to ensure project deadlines are met\n Prevent injuries, slowdowns, and project risks by demanding complete adherence to health and safety standards on construction sites, and reporting safety regulation issues promptly\n Conduct business with external vendors, contractors, and critical subcontractors to negotiate profitable contracts\n Calculate the cost estimate of all project tasks and accurately manage the project budget\n\n \n Work indoors and outdoors at commercial and industrial job sites in various weather conditions.\n Work in confined spaces, at heights, in tanks, vessels, and elevators as required.\n Operate sandblasting, painting, and other industrial equipment after training.\n Prepare steel, concrete, equipment, and other surfaces by removing rust, corrosion, old coatings, dirt, and other contaminants.\n Set up and move blasting equipment, hoses, containment systems, scaffolding, and other job-site equipment.\n Mix and match paint and coatings according to project specifications.\n Apply primers, paints, and protective coatings using brushes, rollers, spray equipment, and other tools.\n Fill holes and cracks with putty and sand surfaces as needed before coating.\n Cover and protect floors, fixtures, equipment, furniture, and surrounding areas before painting.\n Handle paints, coatings, solvents, chemicals, and hazardous materials according to safety procedures.\n Wear required personal protective equipment and follow OSHA, company, and job-site safety requirements.\n Maintain a clean and organized work area and report safety concerns or equipment issues to a supervisor.\n Follow written and verbal instructions and work effectively with supervisors, coworkers, and clients.\n Communicate with clients when needed to understand project needs and provide the appropriate approach.\n Stand, walk, bend, kneel, climb, and perform physically demanding work for extended periods.\n Lift, carry, and move materials, tools, hoses, and equipment weighing 100 pounds or more.\n Work evenings, nights, weekends, holidays, and overtime as project schedules require.\n Travel outside the Chicago area as needed. Transportation, lodging, and per diem are provided for approved out-of-town projects.\n \n En Español:\n Responsabilidades y Requisitos del Puesto\n \n Trabajar en interiores y exteriores en lugares de trabajo comerciales e industriales y bajo diferentes condiciones climáticas.\n Trabajar en espacios confinados, a alturas elevadas, dentro de tanques, embarcaciones y elevadores según sea necesario.\n Operar equipos de sandblasting, pintura y otros equipos industriales después de recibir capacitación.\n Preparar acero, concreto, equipos y otras superficies eliminando óxido, corrosión, recubrimientos viejos, suciedad y otros contaminantes.\n Instalar y mover equipos de sandblasting, mangueras, sistemas de contención, andamios y otros equipos del lugar de trabajo.\n Mezclar y combinar pintura y recubrimientos según las especificaciones del proyecto.\n Aplicar imprimaciones, pinturas y recubrimientos protectores con brochas, rodillos, equipos de pulverización y otras herramientas.\n Rellenar agujeros y grietas con masilla y lijar las superficies según sea necesario antes de aplicar recubrimientos.\n Cubrir y proteger pisos, accesorios, equipos, muebles y áreas cercanas antes de pintar.\n Manipular pinturas, recubrimientos, solventes, productos químicos y materiales peligrosos siguiendo los procedimientos de seguridad.\n Usar el equipo de protección personal requerido y cumplir con las normas de OSHA, las políticas de la empresa y los requisitos de seguridad del lugar de trabajo.\n Mantener el área de trabajo limpia y organizada e informar al supervisor sobre problemas con los equipos o situaciones de seguridad.\n Seguir instrucciones escritas y verbales y trabajar eficazmente con supervisores, compañeros de trabajo y clientes.\n Comunicarse con los clientes cuando sea necesario para comprender las necesidades del proyecto y determinar el enfoque adecuado.\n Permanecer de pie, caminar, agacharse, arrodillarse, subir y realizar trabajos físicamente exigentes durante períodos prolongados.\n Levantar, transportar y mover materiales, herramientas, mangueras y equipos que pesen 100 libras o más.\n Trabajar por las tardes, noches, fines de semana, días festivos y horas extras según lo requieran los proyectos.\n Viajar fuera del área de Chicago según sea necesario. La empresa proporciona transporte, alojamiento y viáticos para los proyectos aprobados fuera de la ciudad.\n \n\nQualifications:\n\n 1+ years of experience as a construction project manager\n Bachelor’s degree in engineering, construction management, or related fields\n Familiarity with construction project management software is highly valued\n Excellent time-management, organizational, leadership, and communication skills\n Possess a deep understanding of the construction industry and the entire building process, including building codes, blueprints, permits, construction equipment, material resources, project management principles, and construction methods\n\n \n A valid Missouri Non-CDL Class E Driver’s License and reliable transportation for scheduled shifts are required.\n DOT certification is required, or candidates must be able to obtain certification within six months of hire.\n A GED or higher is required.\n Forklift and Bobcat operating experience is preferred.\n Knowledge of sandblasting, industrial painting, and industrial construction is preferred.\n Experience with industrial sandblasting, industrial coatings, or commercial painting is preferred.\n Two or more years of relevant work experience and completion of an apprenticeship are preferred, but not required.\n Basic knowledge of painting materials, tools, and equipment is preferred. Training will be provided.\n Experience using hand tools and power tools is preferred.\n Ability to learn and safely operate sandblasting, painting, and other industrial equipment.\n Successful completion of a drug screening is required during the onboarding process.\n A background check is required.\n Strong time management and communication skills are required.\n Ability to follow written and verbal instructions and work effectively as part of a team.\n Ability to work independently and stay focused while completing assigned tasks.\n Ability to pay close attention to job requirements, safety procedures, and instructions.\n Commitment to maintaining a safe and organized work environment.\n Ability to stand, walk, bend, kneel, climb, and work in physically demanding positions for extended periods.\n Ability to lift, carry, and move heavy materials and equipment as required.\n Ability to work indoors and outdoors and adapt to changing job-site conditions.\n Willingness to learn new skills, receive feedback, and develop within the company.\n \n En Español:\n Calificaciones y Requisitos\n \n Se requiere una licencia de conducir Clase E válida de Missouri y transporte confiable para los turnos programados.\n Se requiere certificación DOT o la capacidad de obtenerla dentro de los seis meses posteriores a la contratación.\n Se requiere un diploma de GED o un nivel educativo superior.\n Se prefiere experiencia operando montacargas y Bobcats.\n Se prefiere conocimiento de sandblasting y construcción industrial.\n Se prefiere experiencia en sandblasting industrial, recubrimientos industriales o pintura comercial.\n Se prefieren dos o más años de experiencia laboral relacionada y haber completado un programa de aprendizaje, pero no son requisitos.\n Se prefiere conocimiento básico de materiales y herramientas de pintura. Se proporcionará capacitación.\n Se requiere completar satisfactoriamente una prueba de drogas durante el proceso de incorporación.\n Se requiere una verificación de antecedentes.\n Se requieren buenas habilidades de comunicación y organización del tiempo.\n Capacidad para prestar atención a los requisitos del trabajo y seguir instrucciones.\n Capacidad para permanecer de pie durante períodos prolongados y realizar trabajos físicamente exigentes que requieran fuerza y destreza.\n \n\nAbout Company\n\nBlast It Clean is not your run-of-the-mill cleaning company. We perform industrial cleaning, stripping, and painting. With a strong presence in Kansas City and a growing footprint in Chicago, we partner with clients across industrial, construction, and commercial sectors to restore, protect, and maintain their assets. Our focus is on structural work, both interior and exterior, down to the smallest mechanical component. Using over 48 different blasting media solutions, we have the ability to tailor each process to satisfy each client’s expectations.\nWe aspire to have a culture where you feel right at home. We are a second-chance company that strives to attract and retain a diverse workforce. Blast It Clean is all about second chances and hiring the best person for the job. We promote and sustain an inclusive culture that supports future growth for all of our employees. Talent, loyalty, and motivation are at the heart of our organization. Learn more about us at blastitclean.com

Job Description Clarkson Construction Company is a leading firm in the heavy civil construction industry with a proud history of delivering complex infrastructure projects across the Kansas City region. Our portfolio spans site development, grading, paving, and bridge construction, underscoring our commitment to excellence and innovation. Clarkson Construction Company offers a supportive and dynamic work environment where innovation and hard work are recognized and rewarded. We believe in investing in our employees through professional development and advancement opportunities. Join us and be a part of a team that shapes the infrastructure in and around one of America's most vibrant cities. Job Summary: The Junior Structures Estimator will play a crucial role in our project planning and execution phase, focusing on cost estimation, bid proposal preparation, and the initial stages of project management for bridge construction projects. This position requires a combination of technical knowledge, analytical skills, and effective communication to ensure accurate and competitive project bidding. Essential Functions / Responsibilities: • Estimation & Bidding: Prepare accurate and competitive cost estimates for bridge construction projects by analyzing project drawings, specifications, and other documentation. Develop preliminary project schedules., • Project Analysis: Conduct thorough reviews of potential projects to determine feasibility, risk, and profitability. Collaborate with the project management team to align project objectives and strategies. Compile project risk matrix and formulate risk mitigation strategies., • Vendor & Subcontractor Solicitation & Coordination: Liaise with vendors and subcontractors to solicit and evaluate bids, ensuring all estimates include up-to-date pricing and availability of materials and labor. Perform quote comparisons and make recommendations for selection., • Client Interaction: Engage with clients during the bidding process to clarify project requirements, adjustments, and to foster strong professional relationships. Present and explain project proposals to clients, designers, and operations teams., • Documentation & Reporting: Maintain detailed records of all estimations, bids, and initial project specifications to ensure transparency and accuracy in project initiation. Assist in oversight of historical cost database, bid management, and estimating software., • Collaboration: Work closely with the project management, engineering, and construction teams to ensure seamless project transitions from estimation to execution. Qualifications Requirements: • Bachelor’s degree in Civil Engineering, Construction Management, or a related field., • 0 - 3 years of exposure to estimation., • Exposure to estimation software (e.g., Agtek Gradework, Highway, Underground and Materials, AutoCAD, HCSS HeavyBid, and/or Bid2Win, Bluebeam Revu), • Experience with Excel and Microsoft Office Suite., • An understanding of construction processes, materials, and the latest industry standards., • Excellent analytical, organizational, and negotiation skills., • Excellent written and verbal communication skills., • Excellent interpersonal skills., • Capable of working in a team environment and handling client interactions professionally., • Able to manage multiple bids and projects simultaneously under tight deadlines. Physical Requirements and Working Environment: • Ability to sit, climb, balance, stoop, kneel, crouch or crawl, walk, stand; Able to frequently lift and/or move up to 10 lbs. and lift and/or move up to 50 lbs., • This position requires in-person work., • Professional, business casual office environment. Clarkson Construction Company is an Equal Opportunity Employer (EOE). We provide equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, national origin, ancestry, citizenship, age, mental or physical disability, pregnancy, sex, marital or domestic partnership status, veteran status, sexual orientation, gender identity, genetic information, or any other characteristic protected by applicable federal, state or local law, ordinance or regulation.

Job Description Chappell Electric’s project management team, you will oversee all aspects of assigned commercial projects from commencement to completion. You will manage these projects in a manner that exceeds our customers’ expectations and ensures that our work adheres to all company safety policies and OSHA mandated requirements. This position reports to the CEO/President. What we expect from you • To bring decisive, focused leadership., • To be results driven., • To speak up and challenge when you disagree., • To be accountable to yourself and your co-workers. What can you expect from us • Every opportunity to advance in the company., • An environment free of bureaucracy., • A culture that encourages candid, open communication, up, down, and across., • Continued training and development., • Recognition for achievement of goals 1. Negotiate and establish sales quotes based on volume of products purchased and nature of marketplace to effectively offer competitive pricing and ensure the highest profitability., 2. Ordering and checking-in material, managing material, organizing inventory, assisting to increase efficiency. All material ordered will require a sign off by CEO/President for approval., 3. Pursue product applications utilizing personal knowledge, internal specialist or other internal resources, distribution representatives and other available sources., 4. Perform basic mathematical calculations required to accurately complete assigned tasks (i.e. margins). Use sound judgement, listening, and problem-solving skills to analyze customer/vendor/supplier problems, and to recommend the proper course of action. Product and application knowledge essential., 5. Must be able to sit and utilize a computer, computer keyboard, computer monitor and telephone for prolonged periods of time. PC proficiency for data entry and utilization of Microsoft Office applications and Adobe Acrobat., 6. Participation in Project Estimates, 7. Manage labor costs of projects through ongoing job forecasting (time management)., 8. Oversee pre-con meetings to ensure successful handoff from estimating to field., 9. Collaborate with prefabrication and design departments, 10. Set clear goals and expectations to foreman., 11. When necessary, estimate change orders for assigned projects., 12. Manage all jobs closeout procedures, RFI’s, and submittals., 13. Conduct post project reviews to determine areas for future improvement., 14. Provide coaching/counseling to foreman., 15. Develop/maintain network of professional relationships within our industry. Employer Benefits: Health/Dental/Vision/Life Insurance, 401K, 401K matching Job Requirements: · Able to perform as a Foreman on the jobsite as needed. · Able to meet deadlines. · Able to work overtime, if needed. · Ability to prioritize and manage multiple tasks and deadlines. · Excellent negotiation skills and interpersonal skills. · Strong customer service orientation- both external and internal. · Product and application knowledge desired. · Good work ethic and willing to step-up and persevere to get job specific tasks completed. · Experience with construction desired. Equivalent experience in the industry will be given serious consideration. · Working knowledge of industry product and materials preferred. · Ability to thrive in a fast-paced environment. · Must exhibit a higher level of technical aptitude. · Bachelor’s Degree (preferred) · Construction Experience- 10-year (preferred) · Project Management- 3-year (preferred)

Job Description Position Summary Viking is seeking motivated individuals interested in working in a fabrication, manufacturing, mechanical, or production environment. We operate a fast-paced fabrication shop supporting steel pipe fabrication, welding, machine operation, robotics, and material handling operations. The Fabrication Production Associate position is a hands-on production role responsible for supporting fabrication activities including machine operation, pipe preparation, material movement, welding support, quality inspection, and general shop operations. Depending on operational needs, employees may support fabrication, production, machine operation, welding, robotics, shipping preparation, or other manufacturing functions throughout the facility. This role is ideal for candidates with backgrounds in manufacturing, warehouse, machine operation, construction, welding, mechanical trades, or general labor. Previous fabrication experience is helpful but not required. Viking provides on-the-job training for fabrication equipment, welding support functions, robotics, production processes, quality standards, and safety procedures. Essential Duties & Responsibilities • Operate fabrication and production equipment including plasma cutting machines, cold saws, threading machines, grooving machines, grinders, and semi-automatic fabrication equipment., • Support fabrication, production, welding, machine operation, robotics, and material handling activities throughout the fabrication shop., • Cut, groove, thread, grind, and prepare steel pipe and materials to customer specifications and production requirements., • Assist with machine operation involving plasma cutting, outlet placement, welding support, and automated fabrication processes., • Read and interpret work orders, production paperwork, measurements, specifications, and tape measures to ensure production accuracy and quality standards are met., • Visually inspect fabricated materials, welds, and finished products for defects, dimensional accuracy, and quality compliance., • Perform grinding, deburring, cleanup, finishing work, and general fabrication support activities., • Load, unload, stage, organize, and move steel pipe, fittings, and raw materials throughout the production process., • Bundle, band, label, and prepare finished products for shipment., • Operate forklifts, pallet jacks, CombiLift equipment, overhead cranes, and other material handling equipment as assigned., • Troubleshoot minor production or machine issues and communicate equipment or quality concerns to leadership., • Maintain a clean, organized, and safe fabrication and production environment., • Follow all company safety procedures, PPE requirements, lockout/tagout procedures, and Standard Operating Procedures (SOPs)., • Complete required operational, safety, and production training while demonstrating acceptable competency and performance standards., • Support additional operational and production needs as assigned by Fabrication Leadership or Branch Operations Management. Qualifications & Experience • Previous manufacturing, fabrication, warehouse, machine operator, production, construction, mechanical, or general labor experience preferred., • Previous steel fabrication, welding, robotics, or industrial production experience is a plus but not required., • Ability to work safely in a fast-paced fabrication and manufacturing environment., • Mechanical aptitude and ability to safely operate hand tools, power tools, fabrication equipment, and production machinery., • Ability to read a tape measure and perform basic math calculations., • Ability to read and follow work instructions, production schedules, blueprints, or fabrication specifications preferred., • Ability to adapt to changing production schedules, workflow demands, and operational priorities., • Forklift or material handling experience preferred., • Willingness to learn fabrication processes, welding support functions, robotics, and machine operation through hands-on training. Physical Requirements • Ability to stand, walk, bend, twist, climb, and perform repetitive physical work throughout the shift., • Ability to frequently lift, move, and carry materials up to 50 pounds., • Ability to safely work around moving machinery, forklifts, cranes, sparks, welding operations, and fabrication equipment., • Ability to work in an industrial fabrication environment with exposure to noise, dust, heat, sparks, fumes, and other production-related conditions. Equipment Used • Plasma cutting equipment, • Cold saws and band saws, • Pipe grooving and threading machines, • Grinders and hand tools, • Semi-automatic fabrication and welding equipment, • Forklifts and material handling equipment

Job Description ABOUT MECHANIX WEAR Who We Are Mechanix Wear develops protective gloves for industries including vehicle mechanics, police, military, trade professionals, and construction to name a few. Mechanix Wear is THE TOOL THAT FITS LIKE A GLOVE® In 1991, The Original® Glove was born. The brainchild of a legendary race mechanic that sparked a revolution for working hands. Championed by mechanics and pit crews at the 1991 Daytona 500, The Original® is the glove that started it all. For more information, visit www.mechanix.com. What We Do At Mechanix Wear, we are building a world where Safety is foundational, Performance is enhanced, and Trust in the brand is unshakable. We create and elevate protection beyond your expectations, through innovative design, advanced materials, and a relentless pursuit of excellence. We stand behind our core values including Thinking Big, Being a Problem Solver, Doing Things the Right Way, and TeaMWork. JOB SUMMARY The Operations Supervisor will be responsible for the day-to-day activities of assigned packaging, warehouse, or distribution operations and the supervision, performance, and time management of employees. The Operations Supervisor will model and act in accordance with our guiding principles and core values and serve as an example to their direct reports. This role ensures the safe, efficient, and timely execution of operational activities while maintaining quality standards, productivity expectations, and employee accountability. Leads frontline employees, monitors workflow, supports process improvements, and partners with cross-functional teams to achieve service goals. Requiring strong leadership of people who can drive execution, reinforce safety and quality expectations, and maintain a high-performing team. The Operations Supervisor will champion the Mechanix Wear Core Values including, Think Big, Be a Problem Solver, Do It the Right Way, and TeaMWork. ESSENTIAL FUNCTIONS • Provide leadership and guidance to staff in all activities, • Manage Warehouse Management Software (WMS) in alignment with assigned work area., • Monitor work of all personnel and ensure achievement of all objectives and provide improvements to same if required, • Motivate and coach Distribution Center staff to maximize productivity while ensuring compliance with safety and regulatory standards, • Create a labor plan for your area in collaboration with other Supervisors to ensure overall success of the Distribution Center, • Enforce all company policies, SOPs, and safety regulations, ensuring adherence across the team, • Monitor the safety, cleanliness, and overall condition of both interior and exterior facilities, proactively addressing issues, • Perform process audits to ensure process is being adhered to, • Identify processes improvements, • Write and amend Standard Operating Procedures (SOP’s) with approval of Director of Operations, • Collaborate with Supply Chain and Customer Service Teams and treat other departments and leaders as internal customers, • Monitor and approve employee timecards daily, • Recruit, interview, hire, and train new staff, • Share performance feedback with subordinates and documents coaching conversations, • Performs other duties as assigned, • Must be able to work extended hours of the business including mornings, evenings, and weekends if required by the business needs REQUIRED SKILLS/ABILITIES/COMPETENCIES • Strong Project Management skills, • Strong understanding of the distribution process and inventory control procedures, • Knowledge of ERP and WMS, • Excellent verbal and written communication skills, • Excellent interpersonal and customer service skills, • Excellent time management skills with a proven ability to meet deadlines, • Strong analytical and problem-solving skills, • Strong supervisory and leadership skills, • Ability to prioritize tasks and to delegate them when appropriate, • Proficient with Microsoft Office Suite or related software, • Proficiency with material handling equipment. SUPERVISORY RESPONSIBILITIES • Recruits, interviews, hires, trains and supervises staff, • Oversees the daily workflow of the department, • Provides constructive and timely performance evaluations, • Handles discipline and termination of employees in accordance with company policy EDUCATION AND EXPERIENCE • High school diploma required, • Associate's degree (A.A.) or equivalent from two-year college or technical school preferred, • Three to Five years related experience and/or training; or equivalent combination of education and experience PHYSICAL REQUIREMENTS • Prolonged periods working on a computer, • Must be able to lift, carry, and move items up to 50 pounds at times, • Prolonged periods of standing and walking, • Ability to perform repetitive movements over long periods of time, • Requires frequent reaching, stooping, bending, kneeling, crawling, climbing and crouching, • Requires lifting, positioning, pushing, and/or transferring equipment and materials, • Requires regularly using verbal and written communication skills and must be able to hear and speak clearly, • Requires periods of sitting and working on a computer, • Requires frequent use of hands to grasp, handle, and manipulate objects, • Requires specific vision abilities including close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus TRAVEL None OVERALL WORK ENVIRONMENT The office and warehouse is clean, orderly, properly lit and ventilated. Noise levels are considered low to moderate. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. EQUAL EMPLOYMENT OPPORTUNITY Mechanix Wear provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description The Journeyman Pipefitter Refrigeration is responsible for performing skilled, journeyman level pipefitting work related to the installation, maintenance, troubleshooting, and repair of commercial refrigeration systems. This role supports supermarket and commercial refrigeration operations, including single systems, parallel rack systems, display cases, and walk-in coolers/freezers. Work is performed independently or as part of a union crew while adhering to all applicable safety regulations, labor agreements, and industry standards. Essential Duties and Responsibilities • Install, assemble, modify, and repair refrigeration piping systems, including carbon steel, copper, and specialty piping used in commercial refrigeration applications, • Perform journeyman-level maintenance and repair of refrigeration-related piping, valves, fittings, and supports associated with rack systems, display cases, and walk-in boxes, • Assist in system troubleshooting by identifying piping-related issues affecting system performance, pressure, or refrigerant flow, • Perform leak detection, isolation, and corrective pipe repairs in accordance with EPA and safety requirements, • Interpret and work from blueprints, schematics, isometrics, and piping diagrams, • Coordinate work with refrigeration technicians, electricians, and other trades as required, • Complete assigned service calls and maintenance work in a professional manner that meets customer and company standards, • Maintain accurate service documentation, including notes and photos, for all assigned work, • Comply with all company policies, jobsite procedures, and union work rules, • Maintain a clean, organized work area and company vehicle or assigned tools, • Travel to various job sites as required, • Perform other related duties within the scope of the pipefitter trade as assigned Required Skills and Qualifications • Journeyman Pipefitter status in good standing with the applicable union, • Experience working with commercial or supermarket refrigeration piping systems, • Demonstrated knowledge of refrigeration piping practices, materials, and jointing methods, • Familiarity with rack refrigeration systems and energy management controls (including Novar, CPC, and Danfoss or similar systems), • Ability to work independently with minimal supervision while maintaining productivity and quality standards, • Strong communication and time management skills, • Ability to follow established procedures and detailed work instructions, • Commitment to safe work practices and jobsite safety compliance Certifications and Education • High school diploma or GED preferred, • EPA Refrigerant Handling Certification preferred, • Valid state driver’s license required and must be maintained, • Additional trade certifications or safety training as required by the union or employer Physical Requirements and Working Conditions • Regularly required to stand, walk, climb, bend, kneel, reach, push, and pull, • Must be able to lift, carry, and handle materials weighing up to 75 pounds, • Work is performed in commercial and industrial environments, including refrigerated spaces, • Exposure to moderate noise levels and varying temperatures Additional Information This job description is not intended to be all-inclusive. Duties and responsibilities may change in accordance with operational needs, collective bargaining agreements, or business requirements. The employer provides equal employment opportunities in compliance with all applicable laws and regulations. \nCompany Description The company is an industry leader with over 1,600 employees, offering multifaceted service, construction, and modernization solutions to businesses across the United States. They have been ranked in Inc’s 5,000 Fastest-Growing Companies for the past 10 years. Climate Pros is out to “Disrupt the Industry by Creating a Great Company for Great People” with employees in 43 states, servicing 1,300+ customers and over 10,000 sites and providing expert support 24 hours a day seven days a week. Climate Pros partners with customers including supermarket retail, refrigerated storage warehouses, convenience stores, and the biomedical industry to provide innovative, customized services. Forming long-term partnerships is what sets Climate Pros apart from the competition by providing highly skilled technicians, and consulting on the latest regulations, technology, and trends. To support their mission to have the safest and highest skilled team in the industry Climate Pros invests heavily in the training and ongoing deve The company is an industry leader with over 1,600 employees, offering multifaceted service, construction, and modernization solutions to businesses across the United States. They have been ranked in Inc’s 5,000 Fastest-Growing Companies for the past 10 years.\r\n\r\nClimate Pros is out to “Disrupt the Industry by Creating a Great Company for Great People” with employees in 43 states, servicing 1,300+ customers and over 10,000 sites and providing expert support 24 hours a day seven days a week. Climate Pros partners with customers including supermarket retail, refrigerated storage warehouses, convenience stores, and the biomedical industry to provide innovative, customized services.\r\n\r\nForming long-term partnerships is what sets Climate Pros apart from the competition by providing highly skilled technicians, and consulting on the latest regulations, technology, and trends.\r\n\r\nTo support their mission to have the safest and highest skilled team in the industry Climate Pros invests heavily in the training and ongoing deve

Job Description About Robbins Electric At Robbins Electric Inc., we deliver top-tier electrical solutions across the Midwest—from residential service and commercial construction to specialty EV charging, generator installs, and restoration work. Built on craftsmanship, integrity, and exceptional service, we take pride in doing things right the first time. We are seeking a driven, detail-oriented Electrical Estimator to join our team in the Kansas City area. We reward accurate, high-quality estimating over raw sales volume—ensuring every project we win is profitable and set up for success in the field. Position Overview The Electrical Estimator will prepare detailed, accurate cost estimates and proposals for residential, commercial, and specialty electrical projects. You will evaluate plans, scope out on-site job requirements, build customer relationships, and partner with our field crews to deliver seamless projects. This role offers a strong base pay rate ($30–$40/hr) plus a performance-driven quarterly bonus ($2,500/quarter potential) designed to reward high-margin sales, estimating accuracy, and operational efficiency rather than just gross volume. Key Responsibilities • Proposal & Bid Preparation: Read blueprints, job specifications, and site plans to calculate accurate material, labor, equipment, and permit costs., • On-Site Scoping: Visit residential and commercial job sites to evaluate existing electrical conditions, perform take-offs, and assess project needs., • Client & Contractor Relations: Serve as a primary point of contact for prospective customers, GC partners, and home/property owners. Explain job scopes clearly and deliver timely proposals., • Profitable Closing: Follow up on estimates, handle customer inquiries, and close contracts while maintaining strong gross profit margins., • Field Hand-off & CRM Maintenance: Maintain meticulous details in our CRM and collaborate closely with field leaders and electricians to ensure estimated labor aligns with actual project execution. Qualifications & Requirements • Experience: 2+ years of electrical estimating, project management, or hands-on electrical experience (Journeyman electrician background is a major plus!)., • Technical Knowledge: Strong understanding of the National Electrical Code (NEC), local Kansas City area codes, blueprint reading, and trade estimating practices., • Software Skills: Proficiency with estimating software (e.g., McCormick, Accubid, Planswift, or trade CRM systems) and standard office software (Excel, Word)., • Communication & Organization: Strong interpersonal skills with high attention to detail, pipeline management, and timely turnaround., • License/Requirements: Valid Driver's License with a clean driving record. Compensation & Performance Incentive • Base Pay: $30.00 – $40.00 per hour ($62,400 – $80,000 annual base range), • Quarterly Performance Bonus: Potential to earn up to $2,500 per quarter ($10,000/year potential) through our quarterly incentive program. Unlike traditional volume-only models, our bonus rewards quality and profitability across every phase of the project lifecycle. Payouts are measured across key performance areas including achieving gross-margin targets, generating accurate labor estimates that match actual field execution, maintaining fast proposal volume and turnaround times, achieving strong closing ratios, and ensuring clean project handoffs with meticulous CRM accuracy., • Benefits Package: Paid Time Off (PTO), paid company holidays, and career advancement opportunities.\nCompany Description Team of Experts: Excellence and professionalism are first when it comes to our Electrical Service. We are constantly improving our services, staying up-to-date on all the latest industry advancements and bringing our knowledge to your doorstep. Since inception, our goal has remained the same—to provide reliable services and make sure our clients know we are professionals they can trust. Our Culture: At Robbins Electric, we believe in taking ownership, communicating clearly, and treating every customer, contractor, and teammate with respect. We hire people with integrity who take pride in their work and are committed to continuous improvement. Team of Experts:\r\nExcellence and professionalism are first when it comes to our Electrical Service. We are constantly improving our services, staying up-to-date on all the latest industry advancements and bringing our knowledge to your doorstep. Since inception, our goal has remained the same—to provide reliable services and make sure our clients know we are professionals they can trust.\r\n\r\nOur Culture:\r\nAt Robbins Electric, we believe in taking ownership, communicating clearly, and treating every customer, contractor, and teammate with respect. We hire people with integrity who take pride in their work and are committed to continuous improvement.

Job Description Global Earthwork + Underground was formed from the long-standing relationship between Joe Rodriguez and the team at Clarkson Construction Company. Seizing the opportunity to expand on a trusted professional partnership, Global was created to bolster a joint offering of outstanding services from both firms. Global is proud to be a minority-owned business. Job Summary: The Payroll Specialist is responsible for supporting the Senior Payroll Accountant with payroll for multiple companies, pay groups, locations, and employee categories, including payroll processing, audits, data analysis, report preparation, system automation and administration, and payroll general ledger updates. Key Responsibilities: • Supports the accurate, timely processing of weekly payroll for union and non-union employees in multiple locations., • Helps process certified payrolls and related reporting, tracking and managing Davis Bacon wage orders and prevailing wage laws., • Provides maintenance and updates to payroll software; enters new hires, employee status changes, and updates related to deductions, wage garnishments, and taxes., • Completes relevant quarterly, year-end, and other reporting., • Processes union paperwork and reports, ensuring compliance with all federal, state, and local regulations., • Stays current on changes to wage and hour law, prevailing wage requirements, and union agreements affecting payroll processing., • Processes off-cycle and manual check runs (terminations, corrections, retro pay) within required state timelines., • Assists with internal and external payroll audits, including workers compensation and union audits., • Maintains secure, accurate, and organized records and files, reporting discrepancies., • Meets deadlines and responds to time-sensitive matters accordingly., • Maintains the highest level of confidentiality and complies with company policies on ethical standards and business practices., • Processes / completes short-term projects, and other duties as assigned. Qualifications: • Associate or bachelor’s degree in accounting or finance preferred., • Strong math skills and oral and written communication., • Highly organized and detail-oriented with the ability to multi-task and meet hard deadlines., • Strong work ethic with integrity and commitment to compliance and team environment. PREFERRED QUALIFICATIONS • 2+ years of experience processing union and non-union payroll and/or construction accounting., • Experience with certified payrolls, prevailing wage, union labor agreements, and federal, state, and local regulations., • General knowledge of payroll taxes., • Proficient in MS Office Suite, Vista / Viewpoint, and UKG knowledge. PHYSICAL AND OTHER REQUIREMENTS • Work is performed indoors in a temperature-controlled environment., • Ability to sit, stand, walk, bend, frequently lift and/or move up to 10 lbs. and occasionally lift and/or move up to 20 lbs. Global Earthwork + Underground is an Equal Opportunity Employer (EOE). We provide equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, national origin, ancestry, citizenship, age, mental or physical disability, pregnancy, sex, marital or domestic partnership status, veteran status, sexual orientation, gender identity, genetic information, or any other characteristic protected by applicable federal, state or local law, ordinance or regulation.

Job Description Hotel Equities, a multi-award-winning hotel development and hospitality management company, is currently searching for a remarkable Chief Engineer for the Crowne Plaza Kansas City Downtown in Kansas City, MO. Job Purpose: The Chief Engineer is responsible for maintaining the overall operation of the maintenance department and the appearance and working order of the hotel and is responsible for the administration of the company’s maintenance and life safety programs to include purchasing, preventative maintenance, equipment repairs, hotel security and life safety and supervision of the maintenance department. Warm, knowledgeable service and helpful guidance reassure guests they’ve made the right choice to stay with us. • Ensure customer satisfaction at all times, modeling and adhering to the Guest Service Standards, • Supervises and coordinates the activities of the maintenance staff department, inspecting work performance to ensure compliance to procedures, policies and expectations., • Ensure effective scheduling to achieve both financial objectives and maintain product quality., • Monitor budget and control departmental expenses, including maintenance contracts, utility expenses., • Participate in the preparation of the annual departmental operating budget and Capital plans which support the overall objectives of the hotel, • Ensure compliance with all company, state, local and federal policies/guidelines pertaining to the maintenance of a clean, safe environment for associates, guests and vendors., • Ensure proper operations of the hotel’s equipment and systems, to include life safety, telecommunications, key control, HVAC, plumbing, mechanical, electrical, power plant, pool, kitchen equipment, laundry equipment and any other related systems and equipment., • Ensure maintenance request orders are handled in a prompt and courteous manner including logging and follow up., • Hire, train, supervise, coach and conduct employee performance evaluations of department associates., • Communicate with Assistant General Manager, OM and/or General Manager on a regular basis regarding the specific and overall condition of the building structure(s), related systems, and equipment offering prudent, cost effective proposals for maintaining these systems., • Supervise any external contractors who may be employed by the hotel to carry out maintenance work., • Adheres to all work rules, procedures and policies established by the company Qualifications and Requirements: High School diploma /Secondary qualification or equivalent. Experience with Marriott, Hilton, IHG, Wyndham or Hyatt processes and standards. A least 2 years as a Chief Engineer, Maintenance Manager or related role in a Hotel This job requires the ability to perform the following: • Must be able to speak, read, write and understand the primary language(s) used in the workplace., • Must be able to read and write to facilitate the communication process., • Most tasks are performed in a team environment with the associate acting as a team leader. There is minimal direct supervision., • Requires good communication skills, both verbal and written., • Must possess basic computational ability., • Must possess basic computer skills., • Knowledge of computer accounting programs, math skills as well as budgetary analysis capabilities required., • Must have a thorough knowledge of all types of mechanical equipment such as chillers, boilers, water softeners, and refrigeration equipment., • Must have a thorough knowledge of plumbing and electrical systems, maintenance of records of power, water and fuel consumption., • Must have experience in office procedures, ordering materials, securing bids and of city codes and other applicable laws, building construction, blueprint reading, etc., • Working knowledge of federal, state and local laws governing equal employment opportunity and civil rights, occupational safety and health, wage and hour issues, and labor relations, including, but not limited to the following statutes and their comparable state and local laws (where applicable): Title VII, Equal Pay Act, Pregnancy Discrimination Act, FLSA, ADA, OSHA, FMLA, NLRA Other: • Being passionate about people and service., • Strong communication skills are essential when interacting with guests and employees., • Reading and writing abilities are used often when completing paperwork, logging issues/complaints/requests/ information updates, etc., • Basic math skills are used frequently when handling cash or credit., • Problem-solving, reasoning, motivating, and training abilities are often used., • Have the ability to work a flexible schedule including nights, weekends and/or holidays Amazing Benefits At A Glance: • Salaried Position $75,000 - $85,000 Annually, • Team Driven and Values Based Culture, • Medical/Dental/Vision, • Vacation & Holiday Pay, • Same-day pay available, • Employee Assistance Program, • Career Growth Opportunities/ Manager Training Program, • Reduced Room Rates throughout the portfolio, • Third Party Perks (Movie Tickets, Attractions, Other), • 401(k), • Employee assistance program, • Employee discount, • Flexible schedule, • Flexible spending account, • Life insurance, • Parental leave, • Referral program

Job Description Bordner Home Improvement is looking for an Accounting Assistant to join our team! Starting at $22/hour, with pay based on experience If you're someone who loves numbers, catches the little details others miss, and likes knowing that your work actually makes a difference, this could be a great fit. This isn't your typical "sit in a corner and enter numbers all day" accounting position. You'll play an important role in keeping our financial operations running smoothly, with responsibilities including accounts receivable, payroll, commissions, job costing, reconciliations, and general accounting support. We're looking for someone who is organized, dependable, thinks before they act, and takes pride in doing things the right way. What We Offer • Starting pay of $22/hour, based on experience, • Health, dental, and vision insurance, • 401(k) with a 4% company match, • PTO and sick time, • Company holidays and employee events, • Training and opportunities to grow, • A team-oriented work environment, • The opportunity to be part of a winning team that takes pride in doing things the right way What You'll Do • Manage daily accounts receivable activities, including invoicing, payments, account reconciliation, and outstanding balances, • Assist with weekly and biweekly payroll processing for employees and subcontractors, • Calculate, review, and process employee commissions and bonuses, • Assist with job costing, ensuring labor, materials, and other job expenses are accurately recorded, • Review job costs and investigate discrepancies or unexpected variances, • Reconcile accounts and assist with month-end accounting tasks, • Enter and maintain accurate financial information in company and accounting systems, • Research and resolve billing, payment, payroll, commission, and job-costing issues, • Prepare reports and spreadsheets for management, • Work closely with Coordinators, Project Managers, Payroll, and Accounting teams, • Maintain accurate and organized financial records, • Assist with general accounting and administrative tasks as needed, • Handle confidential employee and company financial information with discretion, • Help identify problems and find solutions before they become bigger problems What We're Looking For You don't have to know everything on day one. We're looking for someone who has a solid foundation and the right mindset. You'll be a great fit if you are: • Detail-oriented and accurate, • Organized and good at managing multiple priorities, • Comfortable working with numbers and financial information, • A problem solver who thinks things through, • Someone who follows processes but can recognize when something doesn't look right, • Dependable and takes ownership of their work, • Comfortable working independently while also being part of a team, • Able to work with confidential information, • Comfortable working in Excel and learning new software and systems, • Able to work in a fast-paced environment without sacrificing accuracy Basic Qualifications • High School Diploma or equivalent, • 1+ year of experience in accounting, Accounts Receivable, payroll, bookkeeping, or a related field, • Basic understanding of accounting principles, • Proficiency with Microsoft Office, particularly Excel, • Strong written and verbal communication skills, • Excellent attention to detail and organizational skills Bonus Points If You Have • An Associate's degree in Accounting, Business, Finance, or a related field, • 2+ years of accounting experience, • Experience with accounts receivable, payroll, or commissions, • Experience with job costing, • Experience with accounting software or ERP systems, • Construction or home improvement industry experience Why Bordner? At Bordner Home Improvement, we believe in doing things at a higher standard. We want people who take ownership and care about their work. We're not looking for someone who simply wants to check boxes and collect a paycheck. We're looking for someone who wants to learn, contribute, solve problems, and take pride in being ridiculously good at what they do. Curious what it's like to have a career with Bordner? Check out this quick video to get a feel for our team and culture: https://www.youtube.com/watch?v=bkTXf6RGKPY If this sounds like you, we'd love to meet you!

Job Description The Payroll Specialist is responsible for supporting payroll for multiple companies, pay groups, locations, and employee categories, including payroll processing, audits, data analysis, report preparation, system automation and administration, tax remittance, and payroll general ledger updates. ESSENTIAL FUNCTIONS • Supports the accurate, timely processing of weekly payroll for union and non-union employees in multiple locations., • Helps process certified payrolls and related reporting, tracking and managing Davis Bacon wage orders and prevailing wage laws., • Provides maintenance and updates to payroll software; enters new hires, employee status changes, and updates related to deductions, wage garnishments, and taxes., • Completes relevant quarterly, year-end, and other reporting., • Processes union paperwork and reports, ensuring compliance with all federal, state, and local regulations., • Audits payroll and related records for accuracy and compliance with federal, state, and local regulations., • Completes EEO reports, workforce reports, and the KDOT/MoDOT weekly trainee submissions, specifically related to city compliance., • Responds to employee pay inquiries and third-party employment and pay verification requests., • Maintains secure, accurate, and organized records and files, reporting discrepancies., • Meets deadlines and responds to time-sensitive matters accordingly., • Maintains the highest level of confidentiality and complies with company policies on ethical standards and business practices., • Processes / completes expense reports, short-term projects, and other duties as assigned. MINIMUM REQUIREMENTS • Associate or bachelor’s degree in accounting or finance preferred., • Strong math skills and oral and written communication skills., • Highly organized and detail-oriented with the ability to multi-task and meet hard deadlines., • Strong work ethic with integrity and commitment to compliance and team environment. PREFERRED QUALIFICATIONS • 2+ years of experience processing union and non-union payroll and/or construction accounting., • Experience with certified payrolls, prevailing wage, union labor agreements, and federal, state, and local regulations., • General knowledge of payroll taxes., • Proficient in MS Office Suite, Vista / Viewpoint, and UKG. PHYSICAL AND OTHER REQUIREMENTS • Work is performed indoors in a temperature-controlled environment., • Ability to sit, stand, walk, bend, frequently lift and/or move up to 10 lbs. and occasionally lift and/or move up to 20 lbs. Clarkson Construction Company is an Equal Opportunity Employer (EOE). We provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disabled status, or any other legally recognized status entitled to protection under applicable federal, state, or local law.

Job Description Position: Labor & Employment Attorney Sign-on bonus: $20,000 Compensation range: $180,000-$300,000 Rapidly growing management-side labor and employment law firm seeks a highly motivated Labor & Employment Attorney to support and expand its nationwide private-sector practice. This opportunity is ideal for entrepreneurial attorneys who want substantial responsibility, direct client exposure, meaningful courtroom experience, and the ability to independently manage sophisticated matters rather than operate within a heavily layered institutional environment. The firm represents employers across a broad range of industries in complex labor relations, employment litigation, workplace investigations, compliance counseling, and strategic business advisory matters. Attorneys will work directly with leadership and clients on high-impact legal issues involving federal, state, and administrative employment laws. This position offers a unique opportunity for both experienced labor and employment attorneys seeking elevated responsibility and long-term growth, as well as exceptional early-career attorneys with strong litigation aptitude, academic credentials, and a demonstrated interest in management-side employment law. Responsibilities Include: • Defending employers in federal and state employment litigation matters involving claims arising under Title VII, ADA, ADEA, FLSA, FMLA, and related state and local employment statutes., • Handling traditional labor law matters, including collective bargaining negotiations, grievance arbitrations, union avoidance strategies, unfair labor practice proceedings, and NLRB matters., • Conducting and defending depositions, managing written discovery, drafting dispositive motions, and preparing cases for arbitration, mediation, and trial., • Drafting EEOC and administrative agency position statements, arbitration briefs, employment agreements, workplace policies, and compliance-related documentation., • Advising employers on employee relations matters, workplace investigations, disciplinary actions, reductions in force, wage and hour compliance, and risk mitigation strategies., • Managing client relationships and serving as a strategic advisor to business owners, executives, and HR leadership teams. Qualifications: • Juris Doctor from an accredited law school., • Active license and good standing in at least one U.S. jurisdiction., • 2–12+ years of labor and employment law experience, preferably on the management side, though exceptional entry-level attorneys with strong academic credentials, law review, clerkship, litigation, or employment law internship experience are encouraged to apply., • Demonstrated legal writing, analytical, advocacy, and oral communication skills., • Experience or familiarity with employment litigation, labor relations, administrative proceedings, or workplace counseling matters preferred., • Ability to independently manage multiple priorities in a fast-paced and entrepreneurial legal environment., • Deposition, hearing, arbitration, mediation, and federal court experience is highly valued for more senior candidates., • Industry experience involving healthcare, hospitality, transportation, aviation, manufacturing, construction, or multi-state employers is a plus., • Willingness to travel periodically for hearings, arbitrations, litigation, and client matters. Compensation & Opportunity: • Compensation structure designed to be highly competitive with major metropolitan labor and employment markets, with total compensation potential ranging from approximately $180,000–$280,000+ depending on experience, business development capabilities, litigation background, and overall qualifications., • Opportunity for substantial hands-on litigation experience, direct mentorship, accelerated career growth, and long-term leadership potential within a growing practice., • Ideal environment for attorneys seeking greater autonomy, meaningful client interaction, and sophisticated legal work without the bureaucracy of a large institutional firm.

Job DescriptionAbout Accu-Crete Since our founding in 1980, Accu-Crete has been dedicated to providing the best service for our clients nationwide through building concrete foundations in a timely, cost-effective manner. Accu-Crete began by specializing in post-tension slab-on-grade multi family apartment foundations and has easily become a leading developer of the slab on grade process. Over the years, we’ve evolved to reflect the needs of our customers and their products. By streamlining the entire process through the use of drive-through animations, parametric cost-estimating system, multi-dimensional models and resource-loaded schedules, we ensure direct communication between our architects, clients, and laborers. We work directly with some of the industry’s leading engineering firms to provide a valuable, cost-effective engineering service. We specialize in: design build concrete services, value engineering, pre-construction services, and our product types include slab on grade including structural and PT SOG concrete frames including light and heavy podium. We are an equal opportunity employer and pride ourselves on recruiting the best and the brightest, then providing a great work environment in which to build a long-term career. About You 5+ years of experience in construction project management, with focus on multi-family or commercial projects. A degree in Construction Science, Construction Engineering or similar or/ equivalent work experience is required. Candidates with proven experience to manage multiple projects at once will be given priority. Software proficiency in the following is expected: Outlook, Excel, Bluebeam, Adobe, Procore, PlanGrid, AutoCAD, and Primavera P6/MS Project/other Construction scheduling software. Experience requirements: • 5+ years working with structural concrete (Tilt-up, post-tension, podium deck, foundational pouring, pre-cast, and other concrete forms), • Contractor and vendor selection and oversight, • Scope coverage, • Contract negotiation, • OSHA training and safety, • QC and schedule accountability, • Material& equipment procurement, • Change orders, • RFI support, • Field daily reports, close out About the Job The Assistant Project Manager (APM) provides overall management direction for structured concrete projects. The APM is responsible for establishing project objectives through effective planning and monitoring all construction activity in collaboration with the project Superintendent. They are responsible for production results of the project, as well as safety on the project. We offer a competitive base salary, a strong bonus program, and a generous benefits package. This APM position is for projects/work sites in Kansas City, KS. Duties (including but not limited to): Responsible for Pre-Construction Duties: Works with Project Manager to plan project sequencing, equipment, manpower, etc. Examine the scope of work and reviews contract drawings and project specifications to fully understand the project requirements. Coordinates Project Start-Up Process: Facilitates project operations start-up. Provides input on project staffing plans. Schedules and facilitates pre-con meetings with the Superintendent, client representative(s), testing lab representative(s), subcontractors, and suppliers. Collaborates with the Project Team to: • Maintain weekly a detailed/critical path project schedule to support construction process, updated on a weekly basis (at minimum), • Collect production data daily by project specific work breakdown structure (WBS), • Submit all material tickets for the project, • Communicate project needs to greater Project Management team, • Develop shop drawings when required Responsibilities (including but not limited to): Project Management Support: • Coordinate Architectural, Structural, and Civil drawings, • Review project constructability with Superintendent and PM, • Create RFIs for discrepancies and maintain RFIs in Procore, • Collect and distribute three-week lookahead schedules from superintendents, • Distribute latest drawings to Rebar, PT and formwork drafters through Procore, • Review project specifications and submit all required items for approval, • Review and submit Rebar, PT and Formwork Shop drawings, • Update drawings in the Office Trailers and save latest drawings in Procore, • Prepare stressing log and review stressing results, • Collect and distribute formwork stripping letters, • Submit Project specific Safety Program(s), Operator Licenses, Rigging and Spotter Licenses, OSHA cards and Quality control plan(s) as required, • Update Concrete Breakdown by Element and by Pour, • Review weekly labor chart, MH/CY and $/CY Estimates and Actuals, • Collect & compile signed field change directives to submit to the PM, • Complete price change requests based on signed change directives, • Review timesheets and coding for field personnel, • Fill out concrete and gravel usage forms and attach delivery tickets while recording both estimated amounts and actual amounts, • Collect and code all other delivery tickets and submit them to AC Office, • Prepare accident reports and submit them to GC and AC offices in a timely manner, • Support the Superintendents with the daily reports., • Prepare bill of lading from the job sites to the vendors (equipment rental) / AC yards, • Collect and compile third party concrete break results., • Check all deliveries against bills of lading and report any/all discrepancies Yard Support: • Assist in the scheduling of material and equipment delivery dates, per Superintendent and Yard Manager, • Assist the Yard Manager in procuring and tracking equipment status (small tools and machinery) Physical Requirements of the Job: Ability to communicate orally in person and over devices with peers, vendors, contractors, clients, and construction workers is crucial. Regular use of mobile devices (talking or texting) and email for communication is essential and required for everyday tasks. Hearing and vision within normal ranges is essential for normal conversations, to receive ordinary information, and prepare, inspect, or review documents. A pre-employment drug test is required for all personnel. Daily job duties and responsibilities require the ability to: remain in a stationary position, move about an office and/or work site efficiently, and move between locations (office, work sites, vendors, etc) frequently. Physical requirements include: the ability to ascend and descend ladders and stairs on occasion, regular exertion of up to 10 lbs. of force, occasional heavy lifting (30+ lb. / 13.6+ kg), and good manual dexterity for use of common office equipment (e.g., computers, mobile devices, copiers).

Job Description Position Overview: The Director of Maintenance and Construction provides enterprise-aligned leadership for all Worlds of Fun attractions, facilities, and grounds maintenance operations, ensuring uncompromising safety and best-in-class guest experience. This role drives the strategic translation of corporate initiatives into disciplined local execution, balancing operational excellence with financial performance. As a senior leader, the Director shapes the culture for both safety and associate experience, optimizes workforce and cost structures, and sets clear, results-oriented direction. In close partnership with park management, the Director ensures the safe, reliable, and compliant operation and construction of all park assets. Key Responsibilities: • Operational Leadership: Sets clear expectations and directs all maintenance activities across the park and attractions, including internal teams, cross-divisional partners, and contractors., • People Leadership & Culture: Champions the Associate Experience within the Maintenance Division, fostering a culture of communication, accountability, ownership, and recognition., • Problem Solving & Decision Making: Leads the resolution of complex maintenance challenges, collaborating with other parks and ride manufacturers to deliver timely, effective solutions., • Financial Acumen: Oversees development and execution of the division's operating budget and capital projects, ensuring alignment with financial and operational goals., • Project Management: Partner with corporate engineering, local architects, and engineers to enhance the property, including budgeting, prioritization, and monitoring spending inclusive of labor expense and leased services., • Continuous Improvement: Identifies and implements process and procedural enhancements to drive efficiency, reliability, and performance. Extract, analyze, and report KPIs related to asset maintenance, reliability, and lifecycle performance., • Policy & Compliance: Ensures consistent enforcement of company policies, regulatory requirements, and operational standards. Lead the implementation, governance, and ongoing optimization of a park-wide CMMS, ensuring consistent use across all assets of the property., • Safety Leadership: Upholds and advances company safety standards, proactively driving improvements in safety culture and performance., • Strategic Alignment & Accountability: Aligns divisional priorities with enterprise objectives while delivering measurable results., • Performs additional duties as assigned by the Park President. Qualifications: • Bachelor's degree, technical certification, or equivalent combination of education and experience., • Minimum of 7 years of progressive leadership experience in maintenance operations or a related field., • Valid driver's license., • AIMS and/or NAARSO certifications preferred., • Demonstrated executive-level communication skills, both written and verbal., • Proven track record in project management, consistently delivering projects on time and within budget., • Strong talent assessment and selection capabilities, with experience hiring and developing senior leaders., • Customer-focused mindset with the ability to effectively support and engage both guests and associates., • Data-driven leader with experience leveraging analytics, reporting, and performance metrics to drive results., • Demonstrated leadership presence with a strong sense of accountability, ownership, and integrity., • Proven ability to lead and influence cross-functional teams in a dynamic operating environment., • Track record of fostering a culture of innovation, collaboration, accountability, and continuous improvement. Knowledge, Skills & Abilities: The Director of Maintenance and Construction demonstrates strategic leadership by aligning long-term planning with organizational objectives, ensuring disciplined execution of projects on time and within budget. This role fosters a high-performing, positive culture that strengthens teamwork and develops leadership capability across the maintenance organization. Leveraging data and analytics, the Director drives informed decision-making, enhances operational performance, and promotes clear, effective communication to enable collaboration and resolve complex challenges. Physical Demands and Working Conditions: The Director of Maintenance and Construction balances executive-level administrative responsibilities with active field leadership across the park. The role includes office-based planning, budgeting, and operational oversight, alongside routine on-site inspections requiring mobility across varied terrain. Responsibilities involve engagement with vendors, contractors, and internal teams in both indoor and outdoor environments, with exposure to a range of weather conditions. This position requires the ability to safely navigate the park environment while occasionally performing physical tasks, ensuring effective oversight of maintenance and construction operations and adherence to safety standards.

Job Description Clarkson Construction Company is a leading firm in the heavy civil construction industry, with a proud history of delivering complex infrastructure projects across the Kansas City region. Our portfolio spans grading, paving, and bridge construction, underscoring our commitment to excellence and innovation. Clarkson Construction Company offers a supportive and dynamic work environment where innovation and hard work are recognized and rewarded. We believe in investing in our employees through professional development and advancement opportunities. Join us and be a part of a team that shapes the infrastructure in and around one of America's most vibrant cities. We are currently seeking a Senior Structures Estimator to join our dynamic team and contribute to our legacy of building the foundations for future generations. Job Summary: The Estimator will play a crucial role in our project planning and execution phase, focusing on cost estimation, bid proposal preparation, and the initial stages of project management for bridge construction projects. This position requires a combination of technical knowledge, analytical skills, and effective communication to ensure accurate and competitive project bidding. Essential Functions / Responsibilities: • Estimation & Bidding: Prepare accurate and competitive cost estimates for bridge construction projects by analyzing project drawings, specifications, and other documentation. Develop preliminary project schedules., • Project Analysis: Conduct thorough reviews of potential projects to determine feasibility, risk, and profitability. Collaborate with the project management team to align project objectives and strategies. Compile project risk matrix and formulate risk mitigation strategies., • Vendor & Subcontractor Solicitation & Coordination: Liaise with vendors and subcontractors to solicit and evaluate bids, ensuring all estimates include up-to-date pricing and availability of materials and labor. Perform quote comparisons and make recommendations for selection., • Client Interaction: Engage with clients during the bidding process to clarify project requirements, adjustments, and to foster strong professional relationships. Present and explain project proposals to clients, designers, and operations teams., • Documentation & Reporting: Maintain detailed records of all estimations, bids, and initial project specifications to ensure transparency and accuracy in project initiation. Assist in oversight of historical cost database, bid management, and estimating software., • Collaboration: Work closely with the project management, engineering, and construction teams to ensure seamless project transitions from estimation to execution. Qualifications Requirements: • Bachelor’s degree in Civil Engineering, Construction Management, or a related field., • Minimum of 5 years of experience in estimation within the heavy civil construction industry, specifically with bridge projects., • Highly proficient in estimation software (e.g., Agtek Gradework, Highway, Underground and Materials, AutoCAD, HCSS HeavyBid, and/or Bid2Win, Bluebeam Revu), • Highly proficient in Excel and Microsoft Office Suite., • Strong understanding of construction processes, materials, and the latest industry standards., • Excellent analytical, organizational, and negotiation skills., • Excellent written and verbal communication skills., • Excellent interpersonal skills., • Capable of working in a team environment and handling client interactions professionally., • Able to manage multiple bids and projects simultaneously under tight deadlines. Clarkson Construction is an Equal Opportunity Employer (EOE). We provide equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, national origin, ancestry, citizenship, age, mental or physical disability, pregnancy, sex, marital or domestic partnership status, veteran status, sexual orientation, gender identity, genetic information, or any other characteristic protected by applicable federal, state or local law, ordinance or regulation.

Job Description The Substation Estimator is responsible for preparing accurate and competitive cost estimates for electrical substation construction projects. This position focuses primarily on above-grade substation construction activities including structural steel, equipment installation, bus work, protection and controls, cable installation, and commissioning support. The ideal candidate is either a former estimator or a construction professional with hands-on substation experience who understands how substations are built in the field and can develop estimates based on real-world construction methods, labor productivity, and installation sequencing. Key Responsibilities • Prepare conceptual, budgetary, and bid-level estimates for transmission and distribution substation projects., • Review engineering drawings, specifications, equipment data sheets, and customer requirements., • Perform quantity takeoffs and pricing for:, • Structural steel, • Power transformers, • Circuit breakers, • Disconnect switches, • Instrument transformers, • Rigid and strain bus systems, • Control houses, • Relay and control panels, • Above-grade conduit systems, • Cable tray systems, • Power, control, and fiber optic cable installation, • Develop labor, equipment, material, and subcontractor cost estimates., • Build estimates based on actual construction sequencing and field productivity., • Evaluate crane requirements, equipment setting plans, outage restrictions, and constructability considerations., • Solicit and analyze vendor and subcontractor quotations., • Identify project risks, opportunities, and value engineering solutions., • Support proposal development and bid review meetings., • Coordinate with project management and field operations teams during project turnover., • Maintain estimating databases, labor productivity rates, and historical cost records. Qualifications • 2+ years of experience in substation estimating, project management, field supervision, project engineering, or substation construction., • Experience as a Substation Estimator, Assistant Estimator, Project Engineer, Superintendent, General Foreman, Foreman, or Project Manager preferred., • Knowledge of transmission and distribution substations ranging from 12kV through 500kV., • Understanding of electrical substation construction methods and installation sequencing., • Ability to read and interpret:, • One-line diagrams, • Physical arrangement drawings, • Equipment layouts, • Structural drawings, • Protection and control drawings, • Construction details and specifications, • Experience developing labor-driven estimates and construction work plans., • Strong understanding of crew composition, equipment utilization, and productivity tracking., • Proficiency with Microsoft Excel and estimating software., • Strong written and verbal communication skills., • Construction Management, Engineering, or related degree preferred but not required. Preferred Experience • Former estimator with experience pricing power delivery, utility, or EPC projects., • Hands-on field experience constructing substations., • Experience with utility, renewable energy, or industrial power clients., • Knowledge of utility standards and construction specifications., • Experience supporting project pursuits from estimate development through project award. Technical Knowledge Candidates should have working knowledge of: • Structural steel erection, • Transformer installation and assembly, • Circuit breaker installation, • Disconnect switch installation, • Bus work installation, • Protection and control systems, • Relay panel installation, • Cable tray installation, • Cable pulling and terminations, • Fiber optic and communication systems, • Equipment testing and commissioning support, • Outage planning and execution, • Crane and rigging operations, • Energization and turnover activities Ideal Candidate The successful candidate understands how substations are physically constructed and can accurately translate that knowledge into a competitive estimate. They understand labor requirements, installation sequencing, equipment needs, outage constraints, and construction execution strategies, and can develop estimates that reflect real-world field conditions and project delivery requirements. \nCompany Description LVI Associates exists to enable exceptional careers around the world; we connect exceptional talent, with exceptional opportunities. We believe that every professional should benefit from the advice of a trusted partner throughout their career. We provide that partnership to mid to senior level professionals within the Energy, Environmental & Infrastructure spaces through our network of micro-specialist consultants. Each team within LVI Associates focuses on a specialist area of Energy & Infrastructure. I specialise in sourcing and placing senior level candidates within the bridges and highway construction spaces. Make LVI Associates your career partner; ensure your career journey is exceptional. LVI Associates exists to enable exceptional careers around the world; we connect exceptional talent, with exceptional opportunities.\r\n\r\nWe believe that every professional should benefit from the advice of a trusted partner throughout their career.\r\n\r\nWe provide that partnership to mid to senior level professionals within the Energy, Environmental & Infrastructure spaces through our network of micro-specialist consultants.\r\n\r\nEach team within LVI Associates focuses on a specialist area of Energy & Infrastructure. I specialise in sourcing and placing senior level candidates within the bridges and highway construction spaces. \r\n\r\nMake LVI Associates your career partner; ensure your career journey is exceptional.

Job Description Summary -CDL Equipment Operator - Utility Inspector:A growing Utility Contractor with a long history of success is currently seeking candidates interested in working as CDL Equipment Operators in response to landing several large, long-term contracts in and around the city of Kansas City, MO. The ideal candidates would have a Class A or B CDL and be able to assist with labor in addition to operating commercial vehicles and equipment. Previous experience is not necessary, as this industry sector in growing tremendously and after initial on the job training and a little experience you'd be set up with a career path for life! Location: Kansas City, MO **Requirements of the CDL Equipment Operator Utility Inspector** Must have at minimum a Class B CDL License (prefer Tankers and Air Brakes) High School Diploma or Equivalent Able to travel on occasions (mostly local work but when traveling it's a great opportunity to make some really good money with overtime and travel incentives) Able to work in confined spaces Must be at least 21 years of age Pass a Background check/MVR check/drug test Able to squat, crawl, and lift up to 100 lbs. Construction and/or OSHA certifications a plus **Benefits of the CDL Equipment Operator Utility Inspector** $25-32/hour, Depending on Experience Travel 25%-75% of the time. Per diem is $1,260/weekly. On the job training offered Comprehensive medical, dental benefits, and 401k Significant overtime available Paid time off Ability to gain valuable certifications Advancement opportunities **Responsibilities of theCDL Equipment Operator Utility Inspector** Operate Class B vehicles (Vacuum Trucks, Jetting Trucks, CCTV Trucks, & Combo Trucks) Performing work in a field construction environment Inspection and cleaning of underground utilities Assist in the setup of inspection and cleaning equipment Also commonly referred to as a Jetter Operator, Jet-vac Operator, Combo Truck Operator You should be proficient in: • Current CDL License Machines & technologies you'll use: • Hydroblaster, • vacuum truck

Job Description Who We Are This position is with Seneca Companies, an OWL Services Affiliated Company. OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. Title: Compliance Testing Operations Supervisor Job Summary: Works with Gilbarco Veeder Root tank monitors, Franklin Fueling Incon tank monitors, leak detector, line and tank testing methods. Provides knowledge and understanding of electronic functionality associated with fueling dispensing equipment both above ground and below ground storage tanks. Serve as a technical resource for technicians with issues in the field to find successful resolution to issues encountered. What You’ll Do: • 40%:Oversee day-to-day operations and activities of field deployed compliance tank and line testing and inspection personnel. Management: Directly supervise testers. Prepare and provide annual goals and Risk Retention to these employees. Interview, hire, train and coach employees. Review and approve weekly timesheets. Approve time off requests, • 15%:Oversee review of reporting field documentation that will be reported to regulatory agencies and/or customer., • 10%:Submitting customer job proposals, invoicing customers, providing superb customer service. Prepare customer quotes or proposals., • 10%:Periodically assist field personnel incompliance testing troubleshooting duties either directly or in directly/remotely; knowledgeable on the procedural expectation and specifications of a variety of fuel containment test methods, equipment functionality & integrity tests, and leak-detection tests in order to detect leaks or to prevent future leaks due to non-compliance or equipment failure. Ensure all Seneca employees follow site and customer policies and procedures., • 10%:Oversee testers inventory (equipment/parts/tracking)., • 10%:Ensure site safety, sustainability of the environment, escalating incidents when needed., • 5%:Other duties as assigned., • Working Hazards: Occasionally works in an environment with potential exposure to fumes, dirt, noise, equipment movement dangers, vibrations, dangerous chemical/solvents, electrical shock, and inclement temperature extremes., • Physical/Mental Exertion: Ability to perform heavy physical labor exerting up to 100 pounds of force on an occasional basis and up to 50 pounds of force on a frequent basis performing such tasks as climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, and grasping. Ability for overnight travel. What We’re Looking For: • Education: Requires High school education, or equivalent experience., • Experience: 5+ years of related experience including but not limited to field experience related to underground storage tank fueling systems including tank top, fittings, i.e. spill buckets, vapor recovery, overfill devices, containment sumps, STP and piping apparatus., • Licenses/Certifications: OSHA HAZWOPER 40-hour certification upon hire or within 12 months of hire. Requires valid driver's license. Preference given to candidates holding current factory certifications (EG: Gilbarco Veeder Root, Franklin Fueling, LOB etc.) Ability to obtain any State Licenses which may be required., • Technical Abilities: Knowledge of electronic and petroleum equipment repair, testing, products and Microsoft Office. Familiar with a variety of field concepts, practices, and procedures. Rely on experience and judgment to plan and accomplish goals to support field personnel under your supervision. Ability to communicate effectively with customers, and other employees of the cross divisional depts in the organization. Performs a variety of complicated tasks. On occasion able to perform manual labor and basic administrative tasks using mobile devices. Proficiency in Microsoft Word and Excel., • Autonomy/Direction: Ability to work independently with little or no direction: Translates managements desired outcomes into workable tasks and executes those tasks at his/her own discretion., • Tools and Equipment: Ability to perform manual technical, mechanical and service work and equipment operation as described. Knowledge and experience with computer programs (Mobile web-based applications, Basic Microsoft Excel). Why Choose OWL Services? • Competitive Pay, • Per Diem & Company Vehicle with Fuel Card, • Health, Dental, and Vision Insurance with optional offerings of HSA and FSA, • Flex/Unlimited Paid Time Off, • 401k with Company Match, • Company Paid Life Insurance, • Free Employee Assistance Program (EAP) and Wellness Program This job description is intended to describe the general nature and level of work being performed by the person assigned to this position. Principal duties and responsibilities are intended to describe those functions that are essential to the performance of this job, and “other” duties and responsibilities include those that are considered incidental or secondary to the overall purpose of this job. This job description does not state or imply that the above are the only duties and responsibilities assigned to this position. Employees holding this position will be required to perform any other job-related duties as requested by management. All requirements are subject to possible modification to reasonably accommodate individuals with a disability. Requisition #4010

Job Description Summary - CDL Equipment Operator - Utility Inspector: A growing Utility Contractor with a long history of success is currently seeking candidates interested in working as CDL Equipment Operators in response to landing several large, long-term contracts in and around the city of Kansas City, MO. The ideal candidates would have a Class A or B CDL and be able to assist with labor in addition to operating commercial vehicles and equipment. Previous experience is not necessary, as this industry sector in growing tremendously and after initial on the job training and a little experience you'd be set up with a career path for life! Location: Kansas City, MO Requirements of the CDL Equipment Operator - Utility Inspector • Must have at minimum a Class B CDL License (prefer Tankers and Air Brakes), • High School Diploma or Equivalent, • Able to travel on occasions (mostly local work but when traveling it's a great opportunity to make some really good money with overtime and travel incentives), • Able to work in confined spaces, • Must be at least 21 years of age, • Pass a Background check/MVR check/drug test, • Able to squat, crawl, and lift up to 100 lbs., • Construction and/or OSHA certifications a plus Benefits of the CDL Equipment Operator - Utility Inspector • $25-30/hour, Depending on Experience, • Travel 25%-75% of the time., • Per diem is $1,260/weekly., • On the job training offered, • Comprehensive medical, dental benefits, and 401k, • Significant overtime available, • Paid time off, • Ability to gain valuable certifications, • Advancement opportunities Responsibilities of the CDL Equipment Operator - Utility Inspector • Operate Class B vehicles (Vacuum Trucks, Jetting Trucks, CCTV Trucks, & Combo Trucks), • Performing work in a field construction environment, • Inspection and cleaning of underground utilities, • Assist in the setup of inspection and cleaning equipment Also commonly referred to as a Jetter Operator, Jet-vac Operator, Combo Truck Operator #HP