Trabajos electrical inspector en Atlanta, GeorgiaCrear alertas

Job DescriptionPOSITION DESCRIPTION Job Title: Maintenance Coordinator Supervisor: Executive Director or Maintenance Director FLSA Status: Hourly, non-exempt Date Approved: September 2025 OVERALL JOB PURPOSE Assures preventative maintenance of Community, including building exterior and interior, grounds, walkways, driveways, and parking lot to ensure the Community is safe, attractive, and operating within budget. May provide back up support for Community Driver to safely transport residents in Community vehicle. MINIMUM JOB QUALIFICATIONS AND REQUIREMENTS • Must be 21 years of age, • High school diploma or equivalent, • Minimum of two (2) years’ verifiable hands-on maintenance experience in areas such as plumbing, electrical, carpentry, HVAC, etc. is necessary, • Ability to perform and/or coordinate emergency building repairs at the Communities; includes contacting and contracting subcontractors to complete repairs, • Provide training for Executive Director in the operation of emergency systems, • Experience in the safe handling and use of power tools normally used in construction, maintenance, and landscaping, • A valid driver’s license and good driving record are required along with proof of auto insurance. May be required to assume the duties and responsibilities of the Community Driver position as needed, • Ability to lift up to one hundred (100) pounds, • Demonstrated ability to communicate effectively and positively (in English), both verbally and in writing, with residents and staff, • Meets state health related requirements (as applicable for position), • Ability to work in a team setting and be a positive team player, • Maintain a positive, respectful, and professional approach with coworkers and residents, • Possess excellent customer service and organizational skills, • Ability to work under time constraints and meet department deadlines, • Satisfactorily pass company’s and state regulated criminal record clearance, health screening and TB clearance (if applicable) ESSENTIAL JOB DUTIES AND RESPONSIBILITIES • Assures maintenance and repair of Community interior, exterior, and equipment, including resident apartments, by performing or supervising maintenance tasks or facilitating such performance by outside maintenance services personnel, as directed by Executive Director, • Inspects Community and monitors Maintenance log daily to promptly address maintenance concerns, • Implements and assures adherence to Community maintenance programs such as HVAC-related, carpet-related, mold-related, etc., • Meets deadlines in repairs to Community equipment and performs various other Community and resident maintenance tasks or facilitates repair by outside maintenance services personnel as directed by Executive Director, • Orders maintenance equipment, parts, supplies, and maintenance services from outside personnel, as needed following company procedures, • Assists in monitoring capital improvement projects, • Recommends maintenance repairs and replacements to Executive Director, Maintenance Director, or Regional Director of Maintenance, • Assures safe, orderly, and functional condition of mechanical room, • Assures all maintenance equipment and supplies are stored appropriately and safely, • Performs emergency maintenance services at Community on an on-call basis, • Assists housekeeping employees in deep cleaning of resident apartments and common areas with attention to detail and according to schedule, • Maintain company standards with an eye for detail on all apartment turns, • Performs duties associated with Community emergency preparation and response systems, as directed by Executive Director, Maintenance Director, or Regional Director of Maintenance, • Maintains Hazardous Chemical Inventory and Safety Data Sheets according to Community Hazard Communication Program and local, county, state, and federal guidelines, • Review SDS as requested for potential exposure to hazardous chemicals and take necessary precautions, • Maintain positive communication with local fire marshal, building inspector, state elevator inspector, and any other jurisdictions governing the community, • Conducts certain components of new employee orientation and education and training classes for employees as directed by Executive Director or Maintenance Director, • Performs quality assurance audits as assigned by Executive Director or Maintenance Director, • Effectively interacts with any Regional or Support Office maintenance services consultants and contracted services personnel, • Participate in monthly Safety Committee meetings, • Perform other duties as assigned by the Maintenance Director or Executive Director OTHER JOB DUTIES AND RESPONSIBILITIES • Perform all work assigned for the agreed-upon salary, accepting no additional payment or non-perishable gifts from residents, vendors, Community management, or others, • Meet the assigned work requirements of the job. Regular attendance is required, • Serve as a role model for all employees by displaying a responsible, cooperative, and positive attitude, • Represent the Community in a professional, courteous, and friendly manner, • Adhere to dress/appearance code. Changes in attire may be dictated by special occasion or weather conditions. If you have questions, check with your supervisor, • Adhere to company policies, procedures, and standards, • Promote resident advocacy and demonstrate excellent customer service at all times, • Follow specified procedures as outlined in the Safety Manual regarding the handling of contaminated material encountered in accidents or injuries on the Community premises, • Attend education and training classes as necessary to fulfill state applicable to the position, • Maintain personnel, resident, and business proprietary and/or confidential matters/material in strict confidence with management of the company (and/or other company staff as needed), • This position is considered a universal employee worker and will be crossed trained in other positions as directed by the supervisor, • Maintains certifications as necessary such as First Aid, to fulfill state regulations (if applicable), • This position has no supervisory responsibilitiesPHYSICAL REQUIREMENTS Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 20% or less 20% to 40% 40% to 60% 60% to 80% 80% to 100% Stand X Walk X Sit X Pushing, pulling and/or reaching X Grasping and fine manipulation X Climb or balance X Stoop, kneel, crouch, or crawl X Talk or hear X Taste or smell X Uses chemicals/paint/toxics X Lifts Weight or Exerts Force 20% or less 20% to 40% 40% to 60% 60% to 80% 80% to 100% Up to 10 pounds Up to 25 pounds Up to 50 pounds X Up to 100 pounds X More than 100 pounds The Community reserves the right to revise the duties set forth in this job description at its discretion.

Job DescriptionJOB DESCRIPTION Job Title: Maintenance Coordinator Supervisor: Executive Director or Maintenance Director FLSA Status: Hourly, non-exempt Date Approved: September 2021 OVERALL JOB PURPOSE Assures preventative maintenance of Community, including building exterior and interior, grounds, walkways, driveways, and parking lot to ensure the Community is safe, attractive, and operating within budget. May provide back up support for Community Driver to safely transport residents in Community vehicle. MINIMUM JOB QUALIFICATIONS AND REQUIREMENTS • Must be 21 years of age, • High school diploma or equivalent, • Minimum of two (2) years’ verifiable hands-on maintenance experience in areas such as plumbing, electrical, carpentry, HVAC, etc. is necessary, • Ability to perform and/or coordinate emergency building repairs at the Communities; includes contacting and contracting subcontractors to complete repairs, • Provide training for Executive Director in the operation of emergency systems, • Experience in the safe handling and use of power tools normally used in construction, maintenance, and landscaping, • A valid driver’s license and good driving record are required along with proof of auto insurance. May be required to assume the duties and responsibilities of the Community Driver position as needed, • Ability to lift up to one hundred (100) pounds, • Demonstrated ability to communicate effectively and positively (in English), both verbally and in writing, with residents and staff, • Meets state health related requirements (as applicable for position), • Ability to work in a team setting and be a positive team player, • Maintain a positive, respectful, and professional approach with coworkers and residents, • Possess excellent customer service and organizational skills, • Ability to work under time constraints and meet department deadlines, • Satisfactorily pass Sunshine’s and state regulated criminal record clearance, health screening and TB clearance (if applicable)ESSENTIAL JOB DUTIES AND RESPONSIBILITIES, • Assures maintenance and repair of Community interior, exterior, and equipment, including resident apartments, by performing or supervising maintenance tasks or facilitating such performance by outside maintenance services personnel, as directed by Executive Director, • Inspects Community and monitors Maintenance log daily to promptly address maintenance concerns, • Implements and assures adherence to Community maintenance programs such as HVAC-related, carpet-related, mold-related, etc., • Meets deadlines in repairs to Community equipment and performs various other Community and resident maintenance tasks or facilitates repair by outside maintenance services personnel as directed by Executive Director, • Orders maintenance equipment, parts, supplies, and maintenance services from outside personnel, as needed following Sunshine procedures, • Assists in monitoring capital improvement projects, • Recommends maintenance repairs and replacements to Executive Director, Maintenance Director, or Regional Director of Maintenance, • Assures safe, orderly, and functional condition of mechanical room, • Assures all maintenance equipment and supplies are stored appropriately and safely, • Performs emergency maintenance services at Community on an on-call basis, • Assists housekeeping employees in deep cleaning of resident apartments and common areas with attention to detail and according to schedule, • Maintain Sunshine standards with an eye for detail on all apartment turns, • Performs duties associated with Community emergency preparation and response systems, as directed by Executive Director, Maintenance Director, or Regional Director of Maintenance, • Maintains Hazardous Chemical Inventory and Safety Data Sheets according to Community Hazard Communication Program and local, county, state, and federal guidelines, • Review SDS as requested for potential exposure to hazardous chemicals and take necessary precautions, • Maintain positive communication with local fire marshal, building inspector, state elevator inspector, and any other jurisdictions governing the community, • Conducts certain components of new employee orientation and education and training classes for employees as directed by Executive Director or Maintenance Director, • Performs quality assurance audits as assigned by Executive Director or Maintenance Director, • Effectively interacts with any Regional or Support Office maintenance services consultants and contracted services personnel, • Participate in monthly Safety Committee meetings, • Perform other duties as assigned by the Maintenance Director or Executive Director OTHER JOB DUTIES AND RESPONSIBILITIES, • Perform all work assigned for the agreed-upon salary, accepting no additional payment or non-perishable gifts from residents, vendors, Community management, or others, • Meet the assigned work requirements of the job. Regular attendance is required, • Serve as a role model for all employees by displaying a responsible, cooperative, and positive attitude, • Represent the Community in a professional, courteous, and friendly manner, • Adhere to dress/appearance code. Changes in attire may be dictated by special occasion or weather conditions. If you have questions, check with your supervisor, • Adhere to company policies, procedures, and standards, • Promote resident advocacy and demonstrate excellent customer service at all times, • Follow specified procedures as outlined in the Safety Manual regarding the handling of contaminated material encountered in accidents or injuries on the Community premises, • Attend education and training classes as necessary to fulfill state applicable to the position, • Maintain personnel, resident, and business proprietary and/or confidential matters/material in strict confidence with management of the company (and/or other company staff as needed), • This position is considered a universal employee worker and will be crossed trained in other positions as directed by the supervisor, • Maintains certifications as necessary such as First Aid, to fulfill state regulations (if applicable), • This position has no supervisory responsibilitiesPHYSICAL REQUIREMENTS Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 20% or less 20% to 40% 40% to 60% 60% to 80% 80% to 100% Stand X Walk X Sit X Pushing, pulling and/or reaching X Grasping and fine manipulation X Climb or balance X Stoop, kneel, crouch, or crawl X Talk or hear X Taste or smell X Uses chemicals/paint/toxics X Lifts Weight or Exerts Force 20% or less 20% to 40% 40% to 60% 60% to 80% 80% to 100% Up to 10 pounds Up to 25 pounds Up to 50 pounds X Up to 100 pounds X More than 100 pounds The Community reserves the right to revise the duties set forth in this job description at its discretion.

Job DescriptionJOB DESCRIPTION Job Title: Maintenance Coordinator Supervisor: Executive Director or Maintenance Director FLSA Status: Hourly, non-exempt Date Approved: September 2021 OVERALL JOB PURPOSE Assures preventative maintenance of Community, including building exterior and interior, grounds, walkways, driveways, and parking lot to ensure the Community is safe, attractive, and operating within budget. May provide back up support for Community Driver to safely transport residents in Community vehicle. MINIMUM JOB QUALIFICATIONS AND REQUIREMENTS • Must be 21 years of age, • High school diploma or equivalent, • Minimum of two (2) years’ verifiable hands-on maintenance experience in areas such as plumbing, electrical, carpentry, HVAC, etc. is necessary, • Ability to perform and/or coordinate emergency building repairs at the Communities; includes contacting and contracting subcontractors to complete repairs, • Provide training for Executive Director in the operation of emergency systems, • Experience in the safe handling and use of power tools normally used in construction, maintenance, and landscaping, • A valid driver’s license and good driving record are required along with proof of auto insurance. May be required to assume the duties and responsibilities of the Community Driver position as needed, • Ability to lift up to one hundred (100) pounds, • Demonstrated ability to communicate effectively and positively (in English), both verbally and in writing, with residents and staff, • Meets state health related requirements (as applicable for position), • Ability to work in a team setting and be a positive team player, • Maintain a positive, respectful, and professional approach with coworkers and residents, • Possess excellent customer service and organizational skills, • Ability to work under time constraints and meet department deadlines, • Satisfactorily pass Sunshine’s and state regulated criminal record clearance, health screening and TB clearance (if applicable)ESSENTIAL JOB DUTIES AND RESPONSIBILITIES, • Assures maintenance and repair of Community interior, exterior, and equipment, including resident apartments, by performing or supervising maintenance tasks or facilitating such performance by outside maintenance services personnel, as directed by Executive Director, • Inspects Community and monitors Maintenance log daily to promptly address maintenance concerns, • Implements and assures adherence to Community maintenance programs such as HVAC-related, carpet-related, mold-related, etc., • Meets deadlines in repairs to Community equipment and performs various other Community and resident maintenance tasks or facilitates repair by outside maintenance services personnel as directed by Executive Director, • Orders maintenance equipment, parts, supplies, and maintenance services from outside personnel, as needed following Sunshine procedures, • Assists in monitoring capital improvement projects, • Recommends maintenance repairs and replacements to Executive Director, Maintenance Director, or Regional Director of Maintenance, • Assures safe, orderly, and functional condition of mechanical room, • Assures all maintenance equipment and supplies are stored appropriately and safely, • Performs emergency maintenance services at Community on an on-call basis, • Assists housekeeping employees in deep cleaning of resident apartments and common areas with attention to detail and according to schedule, • Maintain Sunshine standards with an eye for detail on all apartment turns, • Performs duties associated with Community emergency preparation and response systems, as directed by Executive Director, Maintenance Director, or Regional Director of Maintenance, • Maintains Hazardous Chemical Inventory and Safety Data Sheets according to Community Hazard Communication Program and local, county, state, and federal guidelines, • Review SDS as requested for potential exposure to hazardous chemicals and take necessary precautions, • Maintain positive communication with local fire marshal, building inspector, state elevator inspector, and any other jurisdictions governing the community, • Conducts certain components of new employee orientation and education and training classes for employees as directed by Executive Director or Maintenance Director, • Performs quality assurance audits as assigned by Executive Director or Maintenance Director, • Effectively interacts with any Regional or Support Office maintenance services consultants and contracted services personnel, • Participate in monthly Safety Committee meetings, • Perform other duties as assigned by the Maintenance Director or Executive Director OTHER JOB DUTIES AND RESPONSIBILITIES, • Perform all work assigned for the agreed-upon salary, accepting no additional payment or non-perishable gifts from residents, vendors, Community management, or others, • Meet the assigned work requirements of the job. Regular attendance is required, • Serve as a role model for all employees by displaying a responsible, cooperative, and positive attitude, • Represent the Community in a professional, courteous, and friendly manner, • Adhere to dress/appearance code. Changes in attire may be dictated by special occasion or weather conditions. If you have questions, check with your supervisor, • Adhere to company policies, procedures, and standards, • Promote resident advocacy and demonstrate excellent customer service at all times, • Follow specified procedures as outlined in the Safety Manual regarding the handling of contaminated material encountered in accidents or injuries on the Community premises, • Attend education and training classes as necessary to fulfill state applicable to the position, • Maintain personnel, resident, and business proprietary and/or confidential matters/material in strict confidence with management of the company (and/or other company staff as needed), • This position is considered a universal employee worker and will be crossed trained in other positions as directed by the supervisor, • Maintains certifications as necessary such as First Aid, to fulfill state regulations (if applicable), • This position has no supervisory responsibilitiesPHYSICAL REQUIREMENTS Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 20% or less 20% to 40% 40% to 60% 60% to 80% 80% to 100% Stand X Walk X Sit X Pushing, pulling and/or reaching X Grasping and fine manipulation X Climb or balance X Stoop, kneel, crouch, or crawl X Talk or hear X Taste or smell X Uses chemicals/paint/toxics X Lifts Weight or Exerts Force 20% or less 20% to 40% 40% to 60% 60% to 80% 80% to 100% Up to 10 pounds Up to 25 pounds Up to 50 pounds X Up to 100 pounds X More than 100 pounds The Community reserves the right to revise the duties set forth in this job description at its discretion.

Overview M.C. Dean is Building Intelligence®. We design, build, operate, and maintain cyber-physical solutions for the nation's most recognizable mission critical facilities, secure environments, complex infrastructure, and global enterprises. The company's capabilities include electrical, electronic security, telecommunications, life safety, automation and controls, audio visual, and IT systems. M.C. Dean is headquartered in Tysons, Virginia, and employs more than 5,800 professionals who engineer and deploy automated, secure, and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. The Electrical Quality Control Inspector 2 is responsible for following the M.C. Dean Quality Control (QC) Program to achieve and verify quality expectations for a durable and reliable installation. The Quality Control Officer is responsible for performing field inspections to ensure work is in compliance with all safety policies and procedures. Responsibilities \n • Conduct inspections to ensure compliance and conformance with project or contract specifications\n, • Conduct inspections in accordance with Quality Control Plan\n, • Conduct inspections to ensure adherence to applicable legal requirements\n, • Confer with Quality Assurance, Manager as appropriate\n, • Read blueprints and specifications\n, • Monitor operations to ensure that they meet specifications\n, • Recommend adjustments to the assembly or installation process\n, • Inspect, identify, and submit material, components, or products for testing and measurement\n, • Operate electronic inspection equipment and software\n, • Document approval or rejection of inspected material, components, or products\n, • Identify for removal all components, products and materials that fail to meet specifications\n, • Report inspection and test data and quantities inspected\n, • Participate in the Preparatory Meeting for each definable feature of work to review pertinent sections of the plans and specs requirements with the foreman supervising the work.\n, • Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures\n, • Participate in Follow-up Inspections continuously to insure professional workmanship, quality and safety in accordance with contract documents.\n, • Perform inspections on all work performed in detail, efficiently, and in conjunction with Owner/QC.\n, • Collect data, analyze for continuous improvement, and share with project team weekly.\n, • Participate in the daily Operational Risk Management (ORM) meetings ensuring Quality items/issues for the scope of the work are discussed and present at least 2-3 quality tips of the day relevant to the scope of work.\n, • Document daily QC reports\n, • Understand and follow all applicable quality system procedures, performing all assigned responsibilities outlined in the QMS.\n, • Perform Receiving (REC), First Article (FAI), In-Process (IP) and Final Inspections (FI) on electrical and mechanical assemblies visually and/or with inspection equipment.\n, • Immediately notify operators, or supervision of any non-conformances in products\n, • Perform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products.\n, • Assist in the training of operators and provide guidance.\n, • Assist in the problem-solving process.\n, • Participate in the Daily ORM work briefings to represent the Quality Portion.\n, • Assist in root cause, corrective and preventive action development for systemic issues.\n, • Advise appropriate party of any corrective action to be taken.\n Experience / Education Required: \n • To possess or have the ability to obtain a Virginia state issued Journeyman License within 6 months of hire\n, • Experience with reading and interpreting contractual requirements, drawings, BIM models, specifications, current NEC codes, NETA and other applicable standards\n, • Experience with receiving, production, shipping and quality processes\n, • Excellent PC skills with proficiency in Microsoft programs\n, • Excellent written and oral communication skills\n, • Excellent problem solving, analyzing, and resolving skills\n, • Ability to communicate at all levels of construction\n, • Keen attention to detail\n, • Experience working in a team-oriented, collaborative environment\n, • A competitive salary\n, • Medical, dental, vision, life, and disability insurance\n, • Paid-time off\n, • Tuition reimbursement\n, • 401k Retirement Plan\n, • Military Reserve pay offset\n, • Exposure to computer screens for an extended period of time\n, • Sitting for extended periods of time\n, • Reach by extending hands or arms in any direction\n, • Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard\n, • Listen to and understand information and ideas presented through spoken words and sentences\n, • Communicate information and ideas in speaking so others will understand\n, • Read and understand information and ideas presented in writing\n, • Apply general rules to specific problems to produce answers that make sense\n, • Identify and understand the speech of another person\n

Overview About M.C. Dean M.C. Dean is Building Intelligence. We design, build, operate, and maintain cyber-physical solutions for the nation's most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 7,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. Why Join Us? Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values-agility, expertise, and trust-we foster a collaborative and forward-thinking work environment. At M.C. Dean, we are committed to building the next generation of technical leaders in electrical, engineering, and cybersecurity industries. The Electrical Quality Control Inspector 1 is responsible for following the M.C. Dean Quality Control (QC) Program to achieve and verify quality expectations for a durable and reliable installation. The Quality Control Officer is responsible for performing field inspections to ensure work is in compliance with all safety policies and procedures. Responsibilities \n • Conduct inspections to ensure compliance and conformance with project or contract specifications\n, • Conduct inspections in accordance with Quality Control Plan\n, • Conduct inspections to ensure adherence to applicable legal requirements\n, • Confer with Quality Assurance, Manager as appropriate\n, • Read blueprints and specifications\n, • Monitor operations to ensure that they meet specifications\n, • Recommend adjustments to the assembly or installation process\n, • Inspect, identify, and submit material, components, or products for testing and measurement\n, • Operate electronic inspection equipment and software\n, • Document approval or rejection of inspected material, components, or products\n, • Identify for removal all components, products and materials that fail to meet specifications\n, • Report inspection and test data and quantities inspected\n, • Participate in the Preparatory Meeting for each definable feature of work to review pertinent sections of the plans and specs requirements with the foreman supervising the work.\n, • Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures\n, • Participate in Follow-up Inspections continuously to insure professional workmanship, quality and safety in accordance with contract documents.\n, • Perform inspections on all work performed in detail, efficiently, and in conjunction with Owner/QC.\n, • Collect data, analyze for continuous improvement, and share with project team weekly.\n, • Participate in the daily Operational Risk Management (ORM) meetings ensuring Quality items/issues for the scope of the work are discussed and present at least 2-3 quality tips of the day relevant to the scope of work.\n, • Document daily QC reports\n, • Understand and follow all applicable quality system procedures, performing all assigned responsibilities outlined in the QMS.\n, • Perform Receiving (REC), First Article (FAI), In-Process (IP) and Final Inspections (FI) on electrical and mechanical assemblies visually and/or with inspection equipment.\n, • Immediately notify operators, or supervision of any non-conformances in products\n, • Perform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products.\n, • Assist in the training of operators and provide guidance.\n, • Assist in the problem-solving process.\n, • Participate in the Daily ORM work briefings to represent the Quality Portion.\n, • Assist in root cause, corrective and preventive action development for systemic issues.\n, • Advise appropriate party of any corrective action to be taken.\n Experience / Education Required: \n • Associates Degree in Technical Discipline (may be substituted for quality related experience)\n, • At least 4 years hands-on experience in the electrical industry\n, • To possess or have the ability to obtain a Virginia state issued Journeyman License within 6 months of hire\n, • Experience with reading and interpreting contractual requirements, drawings, BIM models, specifications, current NEC codes, NETA and other applicable standards\n, • Experience with receiving, production, shipping and quality processes\n, • Excellent communication skills (written, and verbal)\n, • Strong attention to details, highly organized and computer literate\n, • A competitive salary\n, • Medical, dental, vision, life, and disability insurance\n, • Paid-time off\n, • Tuition reimbursement\n, • 401k Retirement Plan\n, • Military Reserve pay offset\n, • Exposure to computer screens for an extended period of time\n, • Sitting for extended periods of time\n, • Reach by extending hands or arms in any direction\n, • Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard\n, • Listen to and understand information and ideas presented through spoken words and sentences\n, • Communicate information and ideas in speaking so others will understand\n, • Read and understand information and ideas presented in writing\n, • Apply general rules to specific problems to produce answers that make sense\n, • Identify and understand the speech of another person\n

___Job ID295932 LocationAtlanta, Georgia Full/Part TimeFull-Time Regular/TemporaryRegular ______ Overview Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our ___. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers. About Georgia Tech Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school. Georgia Tech's Mission and Values Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do: 1. Students are our top priority., 2. We strive for excellence., 3. We thrive on diversity., 4. We celebrate collaboration., 5. We champion innovation., 6. We safeguard freedom of inquiry and expression., 7. We nurture the wellbeing of our community., 8. We act ethically., 9. We are responsible stewards. Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact. Operate and maintain boilers and support equipment associated with the central steam heating and chilled water systems. May be assigned responsibility for full plant operations on a limited basis. This position will interact on a consistent basis with: co-workers, vendors, suppliers, contractor personnel, engineers and environmental health and safety personnel. This position typically will advise and counsel: NA. This position will supervise: NA. Job Duty 1 - Operate and maintain components of boilers, hot domestic water, condensate systems, chiller, cooling tower and distribution systems including, pressure vessels, pumps, motors, piping, valves, strainers and/or controls. Job Duty 2 - Operate and maintain components of control system including electrical, pneumatic and/or DDC controls. Job Duty 3 - Test and troubleshoot components of natural gas and/or propane burner and supply systems including burners, pumps, piping, valves, filters and controls. Job Duty 4 - May make purchases of materials and supplies required in operation and maintenance efforts. Job Duty 5 - Perform other duties as assigned Educational Requirements High school diploma, GED Certificate or Vocational School Diploma Required Experience Three to four years of job related experience Additional Preferred Qualifications Advanced boiler operator or inspector license, formal training program completion in related field, universal CFC Refrigerant Recovery License or other more advanced State of Georgia HVAC License Preferred skills include ability to operate and maintain building systems, machine tools, maintenance equipment, motor vehicles, hand/power tools, electrical/electronic instrumentation and light equipment SKILLS This job requires master level skills in operation, cleaning, inspecting, adjusting, repairing, replacing, calibrating,testing and troubleshooting steam generating and distribution system. Journeyman level skills for same activities in chillers and support systems. Working knowledge of computers, controls, electrical systems. utility services, reading drawing and specification, general construction practices, maintenance, repair and troubleshooting practices is also required. The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at ___. Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at ___. The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The University is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and University policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of race, ethnicity, ancestry, color, religion, sex (including pregnancy), sexual orientation, gender identity, gender expression, national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. This prohibition applies to faculty, staff, students, and all other members of the Georgia Tech community, including affiliates, invitees, and guests. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract. More information on these policies can be found here: ___Board of Regents Policy Manual | University System of Georgia (usg.edu). This is not a supervisory position. This position does not have any financial responsibilities. This position will be required to drive. This role is considered a position of trust. This position does not require a purchasing card (P-Card). This position will not travel This position does not require security clearance. Job Grade: C7 Pay Range: $21.20 - $32.65 Location: Atlanta, GA Evening Shift - Sunday thru Sunday - Alternating -12 hours per shift- 7PM - 7AM Successful candidate must be able to pass a background check. Please visit ___

The Construction Inspector will be responsible for inspecting and reporting on every phase of the construction process: including, but not limited to, civil (roadway, site work & utilities), structural, building, electrical, mechanical (water-main & HVAC), indoor air quality, safety, and hazardous m

HS + 10 Years of relevant experience in construction practices, procedures, and testing, and large vertical DoD construction projects. Document observations and inspections of construction including discrepancy notices for noncompliant items. Provide construction photographs as required to document

Job Description Responsibilities The Mobile Trailer Technician will perform general to moderate level of repairs on trailer chassis, bodies, and accessories. Perform maintenance type repairs, such as, chassis lube, DOTs, brake replacements & adjustments. Customer requirements may include reefer repair. Majority, if not all, of work will be performed at customer locations and trailer yards. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Report to the Body Shop or Service Manager assigned to; will be assigned duties on a daily basis., • Review each repair order, work order, and estimator’s notes to understand repairs needed prior to beginning work on the vehicle., • All repairs must be completed according to the documentation on the repair order or the supplement., • Aluminum and steel welding MIG and TIG., • DOT inspections on semi-trailers by DOT standards., • Able to diagnose simple 12 volt electrical light systems., • Basic knowledge and familiarity with air brake and ABS systems and repairs., • Basic metal fabrication ability. We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • Two years’ experience in trailer repair., • Certified aluminum and steel welding; both MIG and TIG welding., • May require additional certification depending on type of tankers required to work on., • Trade or technical school (certificate or diploma), • Trailer/Reefer Manufacturer Certification, • Tanker Inspector Certification, • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description NOVA Engineering is hiring an ICC-certified Residential Building Code Inspector in the Atlanta, GA metropolitan statistical area (MSA). Primary duties will include performing building code inspections (building, mechanical, electrical, and plumbing – as licensed) on residential buildings, as well as managing specific projects related to these types of code inspections. The inspector positions are predominantly field located but may occasionally include office assignments, whereas the Plan Examiners positions are primarily office-based. Essential Functions: • Building Code Review and/or Quality Control Inspections, • Prepare written and electronic reports, and issue notices of correction, • Explain and interpret code and/or quality control regulations or requirements, • Recognize, evaluate and properly resolve unique problems or situations, • Maintain effective customer service relationship with clients and the public, • Assist the inspection management team with business development, • International Code Council (ICC) Residential Combination Inspector (B5) license is required in all four (4) of the following disciplines: building, mechanical, electrical, and plumbing, • High School diploma or equivalent education, • Use of take-home Company Vehicle with fuel card for daily travel to work sites, • Certification incentive/reimbursement program for additional certifications, • Comprehensive group medical insurance, including health, dental and vision, • Opportunity for professional growth and advancement, • Paid time off, • Company–observed paid holidays, • Company paid life insurance for employee, spouse and children, • Company paid short term disability coverage, • Other supplemental benefit offerings including long-term disability, critical illness, accident and identity theft protection, • 401K retirement with company matching of 50% on the first 6% of employee contributions, • Wellness program with incentives About Nova Established in 1996, NOVA was originally founded to provide Environmental Consulting, Geotechnical Engineering, and Construction Materials Testing and Inspection services to the design and construction community, largely in the southeastern United States. Since our founding, NOVA has added additional service lines such as Facilities and Building Envelope, Forensics, Municipal and more. We are dedicated to providing a wide variety of projects and services with an emphasis on collaboration and safety. We offer a stimulating and inspiring work environment where our employees are recognized for their efforts and achievements and are mentored for professional growth. Currently, NOVA employs 650+ personnel in 18 offices serving clients throughout the southeastern United States and beyond. Our firm has professional and administrative support staff that includes registered professional engineers, registered professional geologists, environmental scientists, registered roof observers, LEED accredited professionals, soil/foundation engineers, laboratory specialists, materials technicians, ICC-certified inspectors, NICET-certified technicians, and AWS-certified welding inspectors. NOVA’s facilities include AASHTO-accredited laboratories in soils, concrete, aggregate and hot-mix asphalt testing/inspection. We also have CCRL-inspected laboratories for concrete sampling, curing, and testing. NOVA will continue to expand its reach and reputation as a leader in the testing, inspection, and consulting fields with a strong legacy of quality and integrity by promoting our best internal resources and recruiting a diverse culture of valued and exceptional talent. #LI-JT

As a Data Center Quality Inspector, you provide superb quality control services for our clients by performing essential inspections of electrical equipment and systems, including switchgear and substations.

The Quality Assurance Technician in electrical installations is pivotal in ensuring the highest standards of quality, safety, and reliability, maintaining customer satisfaction and a competitive edge in the market. Familiarity with National Electrical Code and AHJ requirements. Three or more years i

Job Description Industrial Inspection & Analysis is searching for an ANSI Inspector to join our Lifting Services team in Georgia. Position Overview The ANSI Inspector will perform inspections on aerial lifts, bucket trucks, cranes and digger derricks. ANSI inspections ensure that they are in safe working order by conducting a review of the major components. Responsibilities Perform structural tests including: • Acoustic emission tests to assess the integrity of the fiberglass and steel structure, • Magnetic particle inspections to identify surface cracks on ferrous metals, • Torque test all critical fasteners, among others., • Dielectric testing to verify the electrical insulating strength in the FRP upper and lower booms, bucket, liners, FRP extensions on digger derricks, tool circuits, and upper control system. Qualifications • Mechanically inclined., • Basic knowledge of mechanical processes, movement, and assembly., • Basic knowledge of hand tools., • Proficient computer skills., • Strong communication skills., • Adequate visual acuity and perception to identify and distinguish light, color, depth, distance, and other elements pertaining to spatial resolution., • Must be able to work independently with some direction from management., • Problem solver, detail oriented. Job Requirements • Able to stand, sit, squat, climb, crawl and twist for extended periods of time., • Ability to lift up to 50 pounds., • Must be punctual, accountable, and provide high quality customer service., • Must be able to travel for an extended period of time and available to work varying shifts which may include weekends, overnights and holidays., • Must have valid driver’s license and be able to pass a background check and drug screen. Benefits • Medical (w/Mental Health coverage), Dental, Vision insurance, • Voluntary Short-Term Disability, Critical Illness, and Accident plans, • Employer-paid Life Insurance and Long-Term Disability, • Employee Assistance Program (EAP), • 401(k) Retirement Plan, • Paid Time Off and Holidays, • Monthly cell phone reimbursement About Us Industrial Inspection & Analysis®️ (IIA) is an emerging, high growth inspection, testing, and analytical business seeking to build a national platform to serve a breadth of industrial sectors and geographies. We pledge to provide Story-Worthy Service and Solutions, through even the most challenging situations. Making the World Safer is our mission at IIA. We are committed to operating in an environmentally and socially responsible manner and to helping our customers do so as well. Across every industry we serve, we offer inspection and engineering services that promote safety, efficiency and compliance with all applicable regulations. Industrial Inspection & Analysis provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty or status as a covered veteran in accordance with applicable federal, state and local laws. IIA complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, without limitation, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionSalary: About Alston Construction: Alston Construction Company is a nationwide general contractor, with more than 20 offices coast to coast. For over 35 years we have delivered on our promises to our employees, clients, and business partners. We offer extremely competitive salaries, a superb benefits package, and a great place to work! In addition to routinely receiving awards for our projects and safety performance, we have also received numerous Best Places to Work awards! We look for passionate construction professionals who share our core values, to include: commitment, integrity, teamwork, and respect. As our CEO, Paul Little, says In order to be successful at Alston Construction, you must enjoy seeing success in others. If this sounds like you and what youre looking for, wed love to hear from you! Our top tier benefits package includes medical, dental, vision, prescription safety glasses, short-term disability, long-term disability, life insurance/AD&D, HSA, health FSA, dependent daycare FSA, EAP, 401(k), Roth 401(k), After-Tax Roth In-Plan Conversion; paid vacation and sick time, paid holidays, tuition reimbursement, Tickets at Work, paid Identity Theft Protection (family coverage) and more! Job Title: QA/QC Inspector Job Summary: The QA/QC Inspector is responsible for inspecting construction work to ensure compliance with contract documents, approved submittals, applicable codes, and company quality standards. This role performs routine and targeted inspections of work in place, verifies conformance to plans and specifications, documents deficiencies, and supports corrective actions. The QA/QC Inspector works closely with project management, field supervision, subcontractors, and thirdparty inspectors to uphold quality expectations and minimize reworkparticularly on technically complex and missioncritical projects. Essential Duties and Responsibilities: The QA/QC Inspector will be primarily involved with performing the following duties and responsibilities: • Perform daily and scheduled quality inspections of work in place across all construction phases., • Verify materials, installations, and workmanship comply with approved drawings, specifications, codes, and standards., • Inspect mechanical, electrical, plumbing, architectural, and structural scopes as applicable to the project., • Document inspection results, deficiencies, and observations using company QA/QC systems and reports., • Track nonconforming work and verify corrective actions through closure., • Coordinate inspections and testing with subcontractors, consultants, and thirdparty inspection agencies., • Review approved submittals and inspection test plans (ITPs) to confirm installation requirements., • Participate in preinstallation meetings and quality planning sessions., • Support commissioning, punch list, and closeout inspections., • Maintain accurate and organized quality documentation in accordance with company requirements., • Communicate quality concerns promptly to field supervision and project management., • Promote adherence to quality standards and continuous improvement initiatives., • Other duties as assigned Education, Experience, and Certifications: • High school diploma or equivalent required; technical degree or coursework preferred., • Minimum of 35 years of experience in construction inspection, quality control, or field supervision., • Experience on commercial, institutional, healthcare, infrastructure, or missioncritical projects preferred., • Working knowledge of construction codes, inspection requirements, and testing procedures. Alston Construction is an Equal Opportunity Employer.

With over 7,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Dean, we are committed to building the next generation of technical leaders in electrical, engineering, and cybersecurity industrie

As a Traveling Electrical Inspector, you will be responsible for inspecting electrical systems, equipment, and components at various job sites across different locations. Join us in our commitment to quality and compliance as a Traveling Electrical Inspector. Traveling Electrical Inspector.

Curated Builders Project Manager Residential Construction Location: Brookhaven, GA Salary: $70,000 - $90,000 About Us Curated Builders is a premier residential construction company delivering high-end custom homes and luxury renovations.We are known for our attention to detail, exceptional craftsman

The ideal candidate will perform skilled manual work, such as the installation, alteration, maintenance, and repair of electrical systems, equipment, and fixtures. Monitors electrical equipment for needed repairs and maintenance.

Operate hand tools, power tools, precision-measuring devices, and electronic/electrical test instruments. Strong troubleshooting skills across electrical, mechanical, hydraulic, and pneumatic systems. Candidates must have experience with Installing, troubleshooting, repairing, maintaining electrical

Construction Project Manager I.Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation.We strongly encourage applicants whose values align with our i

Perform electrical, plumbing, pneumatic and hydraulic tasks. Must have working repair knowledge and be capable of performing repairs of electrical, plumbing, conveyors, hydraulic, HVAC, PLC, refrigeration, motors/gearboxes, and be able to read and understand schematics/blueprints. Must be able to tr

Troubleshoots electrical equipment for preventative repairs and maintenance. Knowledge of the electrical trade's practices, procedures, and safety precautions. Knowledge of local electrical codes.

Want to build a brighter, bolder future and cultivate your career? Join Ecolab’s team and help create a world in which we all thrive.Nalco Water, an Ecolab company, helps customers conserve more than 161 billion gallons of water annually.We serve industries from food & beverage to mining and manuf

At Inverto North America, we’re defining what’s next in procurement and supply chain - driven by ambition, precision, and impact.With the strength of BCG behind us and a sharp entrepreneurial mindset at our core, we partner with leading global organizations to deliver strategies that create last

Senior Electrical Engineer [Hybrid]/ 401K Match/ Benefits From Day ONE / Great PTO This Jobot Job is hosted by: Haley Lucas Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. As a key member of our engineering team, you will be responsible for managing compl

At Inverto North America, we’re shaping the future of procurement and supply chain - and we’re doing it with ambition, pace, and purpose.Backed by BCG and driven by our own entrepreneurial spirit, we work globally with market-leading clients to deliver strategies that make businesses stronger.Ou

If you are a qualified Electrical Engineer, Please Apply Today! Why join us? Profit Sharing Industry Leading 401K plan Hybrid Schedule Great Base Pay Job Details Key Responsibilities Design electrical systems for higher education facilities including power distribution, lighting, emergency power, fi

REQUIREMENTS Experience in electricity, electrical work, and electrical maintenance and repair Strong troubleshooting skills Knowledge of electrical engineering principles Ability to work independently and as part of a team Excellent communication and problem-solving skills Attention to detail and a

Graham Packaging Company - - Responsibilities: Install and maintain production machines and the plant facilitys equipment; Perform preventative and reactive maintenance on all production equipment and building; Provide emergency/unscheduled repairs of production equipment during operation and perfo

InterSolutions - - Responsibilities: Complete service tickets and work orders efficiently and accurately; Prepare vacant apartments for new residents by managing the turnover process; Keep grounds and common areas clean and free of debris; Deliver exceptional customer service to residents; Perform

Sunbelt Rentals - JobID: PAF-SR-4C255538-98F0-48BB-A8EE-7AB3B98FABB3_1058_1771870507_0 [Maintenance Mechanic] As a Field Service Technician at Sunbelt Rentals, you'll: Perform preventive maintenance, diagnose and make advanced repairs at the customer's location equipment in the safest, most effectiv

C&W Services - - Responsibilities: Perform preventive maintenance and repairs of building mechanical systems; Respond to trouble calls and work requests; Maintain CMMS work orders for log sheets and hours; Start up and secure equipment as requested by Site Lead; Safety duties and on-call rotation w

HW Staffing Solutions - - Responsibilities: Installs new equipment at customer sites; Performs preventive maintenance, troubleshooting, emergency repairs, and service of equipment for customers at the customer site; Carefully and accurately documents all service performed on the equipment as well a

Illinois Tool Works - 4647 Hugh Howell Road - Responsibilities: Perform routine and non-routine maintenance on production equipment, including preventive maintenance tasks; Diagnose, troubleshoot, and repair mechanical, electrical, hydraulic, and pneumatic systems; Ensure that manual and automated e

Aerotek - - Responsibilities: Troubleshoot and resolve issues with mechanical and electrical systems.

Riverdale Road - Responsibilities: Troubleshoot, adjust, and replace AC and DC electrical equipment, including batteries, control stations, fuses, motor starters, relays, switches, timers, servo-driven equipment, photoelectric devices, transducers, Variable Frequency Drives (VFDs), and encoders.

Graham Packaging Company - - Responsibilities: Install and maintain production machines and plant facilities; Perform preventative and reactive maintenance on all production equipment and building; Diagnose problems, replace or repair parts, test and make adjustments; Provide emergency/unscheduled

Inspect and repair all mechanical equipment including, but not limited to: appliances, HVAC, electrical and plumbing components; diagnose and repair boilers, pumps and related components.

Graham Packaging Company - - Responsibilities: Install and maintain production machines and the plant facilitys equipment; Diagnose problems, replace or repair parts, test and make adjustments; Provide emergency/unscheduled repairs of production equipment during operation and perform scheduled main

Government Jobs - Full-Time - $37,830.Annually Purpose of Classification: The purpose of this classification is to perform skilled maintenance, fabrication, overhaul and repair of mechanical equipment located within a water, wastewater, pump stations, lift stations and treatment facilities working u

Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment.

Government Jobs - Full-Time - $41,286.Annually Purpose of Classification: The purpose of this classification is to perform skilled maintenance, fabrication, overhaul and repair of mechanical equipment located within a water, wastewater, pump stations, lift stations and treatment facilities as a full

National Assemblers - - Responsibilities: Receive customer orders to complete installation or assembly jobs in customer's homes; Communicate with the customer to confirm all appointments; Assemble the product to National Assemblers specifications; Build a strong rapport with customers and ensure 10

Government Jobs - Full-Time - $44,739.Annually Purpose of Classification: The purpose of this classification is to perform skilled maintenance, fabrication, overhaul and repair of mechanical equipment located within water or wastewater treatment facilities, pump stations, and lift stations.This clas

Pratt Industries - - Responsibilities: Safely maintain machinery and equipment to ensure continuous running and exceptional quality; Preventative maintenance for all machinery and vehicles; Follow prescribed maintenance schedules and procedures; Assist/train operators to perform their own maintenan

National Assemblers - - Responsibilities: Assemble bikes, grills, furniture, and a variety of products with precision and craftsmanship; Use reliable transportation to reach designated retail locations; Build a reputation for excellence by delivering exceptional service and ensuring 100% customer s

National Church Residences - - Responsibilities: Perform routine and preventive maintenance on HVAC, plumbing, electrical, and building systems.