Electrical inspector jobs in Austin, TexasCreate job alerts

Construction Inspectors – Mechanical, Structural, Electrical Our client is seeking experienced Construction Inspectors to support a large-scale aviation infrastructure project including terminal expansion, airfield improvements, and campus-wide upgrades. They are currently hiring a Mechanical Inspector, Structural Inspector, and Electrical Inspector – Low Voltage. Candidates with prior aviation or airport construction experience are strongly preferred. This is a multi-year, big-budget direct hire opportunity. Company Profile Aviation Infrastructure Construction Inspectors – Mechanical, Structural, Electrical Role: Mechanical Inspector Focus: HVAC systems, hydronic piping, mechanical equipment, automation, and energy systems. Responsibilities include: Inspect installation, operation, and maintenance of HVAC, plumbing, and fire protection systems Review mechanical drawings and project specifications to confirm compliance with codes and design standards Perform pressure testing and functional checks on mechanical systems Document inspection results and report deficiencies Monitor work to ensure compliance with safety regulations and quality assurance protocols Structural Inspector (CWI Preferred) Focus: Structural steel, welding, reinforced concrete, and foundation systems. Responsibilities include: Inspect structural steel installations including bolting, welding, coatings, and alignment Verify reinforced concrete placement, rebar spacing, curing, and formwork Inspect post-tensioned or prestressed concrete systems Review masonry reinforcement and construction methods Observe deep foundation systems including drilled shafts, anchors, and piles Coordinate and witness material testing including weld tests and NDT methods Electrical Inspector – Low Voltage Systems Focus: Communications, security, fire alarm, access control, and data cabling systems. Responsibilities include: Inspect low-voltage systems to ensure compliance with contract specifications and electrical codes Verify performance testing, grounding, labeling, and system integration Witness functional testing and commissioning of low-voltage infrastructure Prepare inspection reports and track deficiencies through resolution Provide final documentation for commissioning and project closeout Construction Inspectors – Mechanical, Structural, Electrical Background Profile: 10+ years of construction inspection experience Aviation or airport construction experience strongly preferred Experience with runways, taxiways, terminals, or underground utilities Knowledge of environmental regulations and construction codes Familiarity with discipline-specific codes (e.g., NEC, IMC, IPC, SMACNA, IBC, IEEE) Ability to interpret contract documents, specifications, and inspection reports Ability to pass a TSA criminal history background check Valid Driver’s License Certified Welding Inspector (CWI) – Structural (preferred) Relevant electrical or mechanical inspection certifications Features and Benefits: Salary plus Cost of Living bonus PTO and Holidays Healthcare Plans 401k plan

Responsibilities ECS is seeking a Code Compliance Project Manager to join our Southwest Facilities team in Austin, TX. In this role, you'll lead a wide range of inspection and plan review projects while ensuring alignment with state and local building codes. The ideal candidate will bring hands-on experience in building, mechanical, electrical, plumbing, and/or fire protection systems, along with strong project management capabilities. Responsibilities: • Perform third party building, electrical, mechanical, architectural, structural, plumbing, and fire safety building inspections, • Prepare and submit daily time and Inspection/Field Reports in accordance with ECS Policy, • Demonstrate extensive knowledge of state and local building code regulations, policies, and procedures, • This position also involves project management of code compliance projects, including reviewing plans, providing technical support, conducting inspections, monitoring project process for performance and budgetary conditions, proposal preparation, as well as attending project site meetings, and assisting with the resolution of technical and administrative problems, • In this position you may be expected to mentor and train other building inspectors, • Responsibilities also include assisting with management of P & L, marketing our services by maintaining and developing client interactions, and participating in marketing and business development functions related to code inspections Qualifications Qualifications: • High School Diploma or GED, • A minimum of 5 years of experience in code compliance inspection of building, mechanical, electrical, plumbing, and fire protection systems and/or plan review, • At least one valid ICC certification required (B2, M2, P2, E2, Fire Inspector I or Fire Inspector II) IECC Certification is preferred, • If driving for, or on behalf of, any ECS subsidiary, a valid driver's license is required Why Join ECS? • Nationwide Facilities Consulting practice made up of more than 180 employees with deep technical expertise and opportunities for collaboration across the country., • Opportunity to lead high-profile projects with technical complexity and visibility., • Be part of a growing and innovative team focused on technical excellence and client service., • Supportive work environment that values expertise, collaboration, and continuous learning., • Competitive salary, performance bonuses, and comprehensive benefits., • ECS is an employee-owned company with an Employee Stock Ownership program (ESOP)!, • 401(k) with up to 4% match, • Tuition Assistance Program About Us ECS Group of Companies (ECS) was founded in 1988 with the goal to raise the standards of professional engineering consulting. Today, we are a leader in geotechnical, construction materials, environmental and facilities consulting services. We are employee-owned with more than 3,000 employees in 100+ offices and testing facilities coast to coast. ECS is currently ranked #66 in Engineering News-Record's Top 500 Design Firms (April 2025), #148 in Engineering News-Record's Top 200 Environmental Firms (October 2025) and #50 in Zweig Group's Hot Firm List (May 2025). For additional information about ECS, visit: ___ ECS is an Equal Opportunity Employer. To learn more, click___.

Job Description Sunland Group, Inc. is seeking an Inspector for immediate placement at Austin Bergstrom International Airport. The Inspector will perform technical combination inspections across multiple disciplines to support ongoing infrastructure improvements. Specifically looking for: Requirements: · Team player, excellent interpersonal skills and a cooperative attitude · Ten years of experience in performing inspections · Aviation-related construction experience, including work on taxiways, runways, terminals, and underground utilities · Ability to pass TSA criminal history background check and a valid drivers license · Compliance with safety procedures and airport regulations · Knowledge of equipment, maintenance, repair and testing of electrical/mechanical/plumbing systems and materials · Responsible, ethical, and conscientious nature · Independent thinking and decision making · Multi-tasking · Excellent spoken and written communication skills Our highly competitive salary/benefit package includes employer paid insurance; 401(k) with a dollar for dollar match up to 4%; Unlimited vacation and paid holidays. If this sounds like what you are looking for come join our team! Company DescriptionSunland Group, Inc. is a multidisciplinary company of professionals that was founded in 1985. We provide program and project management, engineering, architecture and construction management services for a variety of clients. Check out our website Group, Inc. is a multidisciplinary company of professionals that was founded in 1985. We provide program and project management, engineering, architecture and construction management services for a variety of clients. Check out our website .

ABOUT ENOVIS Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent and innovation, the Company's extensive range of products, services and integrated technologies fuels active lifestyles in orthopedics and beyond.For more information about Enovis, please visit ___. What You'll Do Quality Control Inspector Job Description At Enovis we sweat the little things. We embrace collaboration with our partners and patients, and we glory in the grind of scientific excellence - with the goal of transforming medical technology as we know it. Because that's how we change the lives of patients for the better. And that's how we create better together. As a key member of the Quality Control Inspector you will play an integral part in helping Enovis drive the medical technology industry forward through transforming patient care and creating better patient outcomes. Job Title: Quality Control Inspector Location: Austin Business Unit Description: ENOVIS Surgical Key Responsibilities: • Perform First Article Inspection (FAI), • Conduct dimensional and electrical inspection of sub-assemblies or final systems assembly, • Perform quality control/release testing on products and incoming quality inspections and tests of raw materials as directed, • Perform dimensional and/or visual inspection to blueprints,using gauges and other reliant inspection equipment, • Perform quality control inspections in accordance with the Food and Drug Administration (FDA), International Organization for Standardization (ISO) and other applicable regulations, • Perform document review, analysis, inspection, and archive Device History Records (DHRs), • Identify, document, segregate, evaluate, and disposition non-conforming material, • Maintain compliance in a highly regulated environment for medical devices following Good Documentation Practices (GDP), • Able to communicate findings effectively in oral and written form with the aim of improving processes, • Work as part of a team, contributing ideas to improve processes, • Collaborate cross-functionally with team members from areas including but not limited to Manufacturing, Procurement, Distribution, Engineering, Quality, and Regulatory Affairs, • Meet schedule and overtime requirements as needed Minimum Basic Qualifications: • High school diploma or GED required; Associates or Bachelors degree a plus, • 2+ years of relevant experience required; experience with quality inspection in a manufacturing/production environment preferred, • Strong visual acuity and attention to detail required, • Ability to sit for extended periods of time required, • Ability to lift and maneuver up to 30lbs regularly required Travel Requirements: • Customer Focused, • Action Oriented, • Integrity and Trust, • Friendly attitude, • Problem solver, • Works well as both a team and individual "Creating better together". It's the Enovis purpose, and it's what drives us and empowers us every day on a global scale. We know that the power to create better - for our customers, our team members, and our shareholders - begins with having the best team, pursuing common goals, operating at the highest levels, and delivering extraordinary outcomes. Watch this short video and discover what creating better together means to us at Enovis: We offer a comprehensive benefits package which includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Spending and Savings Accounts, • 401(k) Plan, • Vacation, Sick Leave, and Holidays, • Income Protection Plans, • Discounted Insurance Rates, • Legal Services ABOUT ENOVIS Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent and innovation, the Company's extensive range of products, services and integrated technologies fuels active lifestyles in orthopedics and beyond. Visit ___ to learn more. EQUAL EMPLOYMENT OPPORTUNITY: Enovis provides equal employment opportunities based on merit, experience, and other work-related criteria and without regard to race, color, ethnicity, religion, national origin, sex, age, pregnancy, disability, veteran status, or any other status protected by applicable law. We also strive to provide reasonable accommodation to employees' beliefs and practices that do not conflict with Enovis policies and applicable law. We value the unique contributions that every employee brings to their role with Enovis. EQUAL EMPLOYMENT OPPORTUNITY Enovis provides equal employment opportunities based on merit, experience, and other work-related criteria without regard to race, color, ethnicity, religion, national origin, sex, age, pregnancy, disability, veteran status, or any other status protected by applicable law. We also strive to provide reasonable accommodation to employees' beliefs and practices that do not conflict with Enovis policies and applicable law. We value the unique contributions that every employee brings to their role with Enovis.

Job Posting Title: Plumber Hiring Department: Facilities Services Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: Join the ___ team, a highly responsive and knowledgeable crew providing outstanding service for ___ and to the university community. Maintenance Operations, a branch of the Facilities Operations and Maintenance Division, provides comprehensive maintenance services in support of the University's operations. Our teams provide a comprehensive array of qualified services, backed by our licensed and certified technicians, to this end, we offer opportunities for continuing education, as well as various stipends for additional trade licenses. Our team of trained trade experts are well-matched for the university's operational and maintenance needs, whether the facility is a brand new laboratory or our iconic Tower. Our goal is to self-identify operations and maintenance issues long before our clients realize a repair is needed and take a thoughtful approach to using their resources, structuring processes, and providing the best client service and use of university resources. This goal comes from our sense of ownership and pride in our work. With this approach in mind, the team is organized into a zone-based structure and employs flexible work hours, data analysis, and technology to meet operational goals. Your skills will make a difference. You'll be working for a university that is internationally recognized for our academic programs and research. Your work will contribute to operational excellence and enhance the student experience. If you're the type of person that wants to know your work has meaning and impact, you'll like working in our department and for UT Austin. UT Austin provides an outstanding benefits package including but not limited to: • Competitive health benefits (employee premiums covered at 100%, family premiums at 50%), • Voluntary Vision, Dental, Life, and Disability insurance options, • Generous paid vacation, sick time, and holidays, • Teachers Retirement System of Texas, a defined benefit retirement plan, with employer matching funds, • Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b), • Flexible spending account options for medical and childcare expenses, • Robust free training access through LinkedIn Learning plus professional conference opportunities., • Tuition assistance, • Expansive employee discount program including athletic tickets, • Free access to UT Austin's libraries and museums with staff ID card, • Free rides on all UT shuttle and Austin CapMetro buses with staff ID card, • For more details, please see: ___ and ___. For more information on the Maintenance Operations group, please visit: ___ Must be authorized to work in the United States on a full-time basis for any employee without sponsorship. Security sensitive; Criminal background check conducted on selected applicant. Hiring decision is contingent on applicant clearing check. This job class may contain positions that are security sensitive and thereby subject to the provisions of Texas Education Code *51.215. Applications will be reviewed online by the hiring department. This is a 40 hour work week; five 8-hour days, or possible four 10-hour days with schedule to be discussed with supervisor. To perform journey level work in maintaining, repairing and installing plumbing systems that transport water, steam, natural and laboratory gasses, sewer, storm and drain water, chilled water, vacuum systems and related equipment and distribution systems. • Inspects, maintains, repairs, modifies, installs, and replaces building, laboratory, and other miscellaneous plumbing systems. Uses common piping materials such as copper, brass, black steel pipe, galvanized iron, cast iron, polyvinyl chloride, chlorinated polyvinyl chloride, polypropylene, etc., • Locates and repairs leaks in common and specialty piping systems conveying various fluids and gases, including but not limited to domestic water, reclaimed water, wastewater, steam, laboratory gases, natural gas, and refrigerants. Various pipe sizes to 10 inches in diameter and pressures ranging up to 150 pounds per square inch., • Performs preventive maintenance on building, laboratory and specialty plumbing systems and system components including pumps and controls. Utilizes instruments such as ultrasonic, temperature sensing, pressure and flow gauges. Includes working on electronic and pneumatic actuated valves, as well as replacing backflow prevention assemblies, and safety eye washes and showers., • Clears drain blockages. Removes and replaces lavatory fixtures., • Assists other technicians as needed in the accomplishment of shop goals related to key performance indicators. Participates in the On-Call program., • Provides timely and courteous customer service, keeps supervisors up-to-date on daily work order status to ensure clear, concise, and necessary communication channels are maintained and customer expectations are met., • Inspects completed work for conformance with specifications, requirements, and compliance with applicable building and safety codes and regulations., • Reads blueprints, works from specifications, and follows instructions, both written and oral. High school graduation or GED. Three years of experience as a journey level plumber. Licensed as a Journey Level Plumber from the State of Texas Board of Plumbing Examiners or able to achieve this level of licensure within 180 days. License must be maintained as a condition of continued employment. Demonstrated excellent communication skills. Demonstrated ability to follow written and verbal instructions. Demonstrated ability to adhere to safety rules and regulations. Relevant education and experience may be substituted as appropriate. Graduation from an accredited apprenticeship program or technical school. More than three years experience as a journey level plumber. Four years industrial plumbing experience related to the functions listed. Licensed as a Master Plumber in the State of Texas. Licensed as a Backflow Prevention Assembly Tester. Licensed as a Customer Service Inspector. Experience at the University of Texas or in a university setting. Experience in more than one craft or trade. Demonstrated ability to work well within a team environment. Demonstrated excellent customer service skills. Demonstrated stable work history. Working knowledge of computerized systems. Ability to read and understand technical manuals and blueprints related to trade. Ability to write reports summarizing work activities. Successful completion of the Leader Development Program. $57,757 + depending on qualifications • Uniforms and/or personal protection equipment (furnished), • May work in all weather conditions, • May work in extreme temperatures, • May work around chemical fumes, • May work around standard office conditions, • May work around biohazards, • May work around chemicals, • May work around electrical and mechanical hazards, • Repetitive use of a keyboard at a workstation, • Use of manual dexterity, • Climbing of stairs, • Climbing of ladders, • Lifting and moving, • This position and associated job duties have been designated as essential during extraordinary and emergency situations when the university is closed. Essential personnel must maintain contact with their supervisor and report to work as regularly scheduled unless directed otherwise., • Required to operate an electronic device such as an iPhone, iPad, or laptop/desktop computer to perform and fulfill time reporting and work management requirements. Work management requirements include receiving work assignments, updating work orders, and other functions as required., • May be required to work in confined spaces, manholes, tunnels, elevated work, extended shifts including nights, weekends, and holidays., • Considerable walking, standing, squatting, stooping, and moving of heavy materials and equipment in all weather conditions., • May be exposed to loud noise, high dust and allergen levels., • May be required to lift up to 50lbs. Often required to twist, grasp, push, pull and bend., • May be required to operate job related equipment., • May require tuberculosis screening and occasional use of a respirator., • May drive University vehicles. If driving University vehicles, may be required to maintain acceptable driver rating as established in Policy: UTS157 Section 2.5.4., • Participate in on-call program. 40 hours a week, five 8-hour days, or possibly four 10-hour days with schedule to be determined with supervisor. Some overtime, evenings, weekends, and holidays possible. • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left-hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Carpenter, Door Repair Specialist Hiring Department: Facilities Services Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: Join the ___ team, a highly responsive and knowledgeable crew providing outstanding service for ___ and to the university community. Maintenance Operations, a branch of the Facilities Operations and Maintenance Division, provides comprehensive maintenance services in support of the University's operations. Our teams provide a comprehensive array of qualified services, backed by our licensed and certified technicians, to this end, we offer opportunities for continuing education, as well as various stipends for additional trade licenses. Our team of trained trade experts are well-matched for the university's operational and maintenance needs, whether the facility is a brand new laboratory or our iconic Tower. Our goal is to self-identify operations and maintenance issues long before our clients realize a repair is needed and take a thoughtful approach to using their resources, structuring processes, and providing the best client service and use of university resources. This goal comes from our sense of ownership and pride in our work. With this approach in mind, the team is organized into a zone-based structure and employs flexible work hours, data analysis, and technology to meet operational goals. Your skills will make a difference. You'll be working for a university that is internationally recognized for our academic programs and research. Your work will contribute to operational excellence and enhance the student experience. If you're the type of person that wants to know your work has meaning and impact, you'll like working in our department and for UT Austin. UT Austin provides an outstanding benefits package including but not limited to: • Competitive health benefits (employee premiums covered at 100%, family premiums at 50%), • Voluntary Vision, Dental, Life, and Disability insurance options, • Generous paid vacation, sick time, and holidays, • Teachers Retirement System of Texas, a defined benefit retirement plan, with employer matching funds, • Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b), • Flexible spending account options for medical and childcare expenses, • Robust free training access through LinkedIn Learning plus professional conference opportunities., • Tuition assistance, • Expansive employee discount program including athletic tickets, • Free access to UT Austin's libraries and museums with staff ID card, • Free rides on all UT shuttle and Austin CapMetro buses with staff ID card, • For more details, please see: ___ and ___. For more information on the Maintenance Operations group, please visit: ___ Must be authorized to work in the United States on a full-time basis for any employee without sponsorship. Security sensitive; Criminal background check conducted on selected applicant. Hiring decision is contingent on applicant clearing check. This job class may contain positions that are security sensitive and thereby subject to the provisions of Texas Education Code *51.215. Applications will be reviewed online by the hiring department. This is a 40 hours a week, five 8-hour days, or possible four 10-hour days with schedule to be determined with supervisor. Some overtime, evening, weekends and holidays possible. Perform and document journey-level carpentry work in the maintenance, repair, or alteration of buildings. • Repairs and installs emergency exit hardware, ceiling tile, walls (sheet rock, masonry, etc.), doors, automated doors, and signage using hand and power tools such as circular saw, drill, hand tools, router, table saw, sander, grinder, nail guns, and other equipment. Also, uses meters and specialty tools., • Generates material lists and organizes required materials for efficient work. Keeps accurate records of materials used and maintains daily time reports to efficiently complete work and document details of the functions performed., • Performs preventive maintenance on doors and associated hardware as well as other assigned systems., • Assists other team members in the accomplishment of shop goals related to key performance indicators. Participates in the maintenance and operations of the shop. Cleans and maintains tools and equipment used to perform duties to maintain a clean and safe work environment., • Provides timely and courteous customer service, keeps supervisors up to date on daily work order status to ensure clear, concise and necessary communication channels are maintained and customer expectations are met., • Works independently and as a team member. Assists other team members as necessary with training in work techniques to accomplish team goals in a safe and timely manner. Inspects the work of others for conformance with specifications, requirements, and compliance with applicable building and safety codes and regulations., • Participates in the On-Call program., • Perform other related functions as assigned. Work is performed in accordance with normal trade practices and is inspected for conformity to standards, quality and quantity by journey-level employees or supervisor. Attends staff meetings, safety training and meetings. May drive University vehicles. If driving University vehicles, must maintain acceptable driver rating as established in Policy: UTS157 Section 2.5.4. High school graduation or GED. Three years of experience as a journey level carpenter. Relevant education and experience may be substituted as appropriate. Associate degree in technical field. Completion of vocational, trade, or apprentice program in one or more journeyman trades. Five years experience. Experience at the University of Texas or in a university setting. Experience in more than one craft or trade. Excellent customer service skills. Demonstrated ability to work well within a team environment. Demonstrate excellent communication skills. Demonstrated ability to follow written and verbal instructions. Demonstrated ability to adhere to safety rules and regulations. Fire and Egress Door Assembly Inspector (FDAI) certification. Door + Hardware Consultant (DHC) certification. $47,840 + depending on qualifications • Uniforms and/or personal protection equipment (furnished), • May work in all weather conditions, • May work in extreme temperatures, • May work around chemical fumes, • May work around standard office conditions, • May work around biohazards, • May work around chemicals, • May work around electrical and mechanical hazards, • Repetitive use of a keyboard at a workstation, • Use of manual dexterity, • Climbing of stairs, • Climbing of ladders, • Lifting and moving, • This position and associated job duties have been designated as essential during extraordinary and emergency situations when the university is closed. Essential personnel must maintain contact with their supervisor and report to work as regularly scheduled unless directed otherwise., • Required to operate an electronic device such as an iPhone, iPad, or laptop/desktop computer to perform and fulfill time reporting and work management requirements. Work management requirements include receiving work assignments, updating work orders, and other functions as required., • May be required to work in confined spaces, manholes, tunnels, elevated work, extended shifts including nights, weekends, and holidays., • May be exposed to loud noise, high dust and allergen levels., • May be required to lift up to 50lbs. Often required to twist, grasp, push, pull and bend., • May be required to operate job related equipment., • May require tuberculosis screening and occasional use of a respirator., • May drive University vehicles. If driving University vehicles, may be required to maintain acceptable driver rating as established in Policy: UTS157 Section 2.5.4., • 40 hours a week, five 8-hour days, or possible four 10-hour days with schedule to be determined with supervisor. Some overtime, evening, weekends and holidays possible., • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left-hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Division: Austin Main Project Location(s): Austin, TX 78731 USA Minimum Years Experience: Travel Involved: Job Type: Regular Job Classification: Experienced Education: Job Family:Construction Compensation:Salaried Exempt Position Description: Oversee work of Scheduling team, project staff, or consultants assigned to scheduling function, on one or more construction projects of varying size and complexity for Business Unit. Prepare and maintain schedules, develop and review project baseline, and monitor and track scheduling project progress. Essential Duties & Key Responsibilities: • Conduct scheduling activities while leading, managing, and supervising project scheduling activities of Scheduling group (e.g., Scheduling Engineers, project staff, or consultants) assigned to scheduling function on one or more construction projects of varying size and complexity throughout Business Unit (BU)., • Perform Scheduling activities including monitoring, tracking progress, and preparing summary and detail level schedules., • Develop full Critical Path Method (CPM) logic-generated baseline schedules for projects,, • Communicate project execution plan, monitor performance against original baseline schedule and previous month's forecasts, and promote early identification and mitigation of risks., • Develop construction schedule throughout all project phases, including RFP/Project Launch through Substantial Completion/Final Turnover., • Collaborate with project departments (e.g., Preconstruction, Commissioning, Procurement, Construction) to prepare detailed schedules., • Collaborate with VDC to integrate BIM, 4D models, and logistics planning., • Integrate LPS (Last Planner System) methodology into construction project schedule., • Perform monthly progress updates complete with narrative and create target comparison and periodic look-ahead schedules., • Develop and update cost and/or resource loaded schedules., • Conduct project schedule reviews with project leadership and provide Scheduling Dashboard statistics at Operations Review Meetings (ORMs) or other sessions (e.g., Pull Plan Sessions, Trade contractor meetings)., • Participate in Business Development (BD) and BU marketing activities for proposal presentations and activities as related to project scheduling and provide scheduling contract language and related documentation., • Provide support and training of scheduling software and planning and scheduling techniques to project and office employees., • Guide Scheduling group to facilitate and implement consistent application and adherence to company and Turner 'Scheduling Playbook' policies, practices, and procedures., • Develop and maintain relationships with project stakeholders to promote value of scheduling and communication of overall project plan., • Engage with clients as Planning and Scheduling SME (subject matter expert) to educate and influence expectations for Planning and Scheduling standards, and best practices to satisfy owner standards and other requirements., • Conduct project site progress walks to capture progress, review and verify with project team, and update schedule accordingly., • Challenge project team based on previous, current, and future schedule data for As Built vs. Planned progress to ensure logical construction sequencing., • Perform audits of project schedules using diagnostic and comparison software to validate health and quality of schedule, Last Planner System integration, and review risk/gap analysis of scheduling function across projects. Provide feedback to Scheduling group to mature scheduling practices., • Implement and educate Scheduling group to use advanced techniques (e.g., weather conditions, TIAs (Time Impact Analysis), cost and resource loading) to identify potential schedule risks and delays., • As required, provide historical schedule information to defend against or initiate a claim. Qualifications: • Bachelor's Degree from accredited degree program in Engineering, Construction Management, Building Construction, or related field, with minimum of 8 years of related experience or equivalent combination of education, training and experience, • Large construction project experience (>$100m), • Scheduling Certification desired (e.g., Association for the Advancement of Cost Engineering (AACE), Planning & Scheduling Professional (PSP), Project Management Institute Scheduling Professional (PMI-SP)), • Experience in construction project engineering and supervisory positions, • Knowledgeable of building construction, materials, systems, market conditions and Trade practices, • Ability to interpret contract documents, drawings, specifications, and scopes of work to build schedules, • Proficient use of scheduling software applications (e.g., Oracle Primavera P6), • Proficient use of scheduling diagnostic and comparison tools (e.g., Acumen Fuse, Change Inspector), • Advanced experience conducting gap analysis and managing scheduling risks, • Advanced knowledge of estimates for project schedule development, • Familiar with earned value concepts and using construction resources to validate productivity and durations, • Ability to develop metrics and track results, • Strong analysis, critical thinking, good judgment, and problem-solving skills, • Experience implementing continuous improvement methods and tools (e.g., lean construction, Takt) Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Performance of the required duties require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. While performing the duties of this job, the employee is frequently required to sit, climb, balance, stoop, kneel, crouch, crawl, use hands to finger, handle or feel objects, tools, or controls, and reach with hands, talk, and hear. The employee frequently views a computer monitor and frequently uses a computer keyboard. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. The employee is regularly required to be mobile, and the employee occasionally travels both short and long distances via a variety of conveyances. The employee occasionally performs work on-site at construction work sites, office locations, and/or off-site venues. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works at construction work sites where the employee is exposed to moving mechanical parts, high precarious places, fumes, or airborne particles, outside weather conditions, and risk of electrical shock. The noise in the work environment is usually moderate to loud. While performing the duties of this job, the employee occasionally works in an office or remote setting. The noise in the work environment is usually quiet to moderate in an office setting. The employee is required to work in compliance with company safety policies, procedures, and applicable laws. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Division: Huntsville Main Project Location(s): Monroe, LA 71201 USA Minimum Years Experience: Travel Involved: 100% Job Type: Regular Job Classification: Experienced Education: Job Family:Construction Compensation:Salaried Exempt If you picture yourself doing great things that make a difference in the lives of others, Turner is the place to be. Turner Construction is an industry-leading commercial construction general contractor with a 120-year history spanning iconic projects around the globe, including 10 of the world's 100 tallest buildings. Turner is committed to sustaining a diverse, equitable, and inclusive environment where everyone feels connected, sees themselves represented at all levels of the company, and feels supported to reach their ultimate potential. Turner builds some of the most ambitious projects in the world. The technical expertise of our people makes us a recognized leader in many markets. Our projects are well known. Our people set us apart. We inspire greatness. Can you picture yourself at Turner? If so, apply, and let's do great things together! Position Description: Develop schedules for large or multiple smaller construction projects with more complex scheduling activities. Revise and review project schedule with project team and monitor and track progress against defined schedule. Essential Duties & Key Responsibilities: • Develop thorough understanding of work breakdown structure and its importance for large or multiple smaller construction projects with more complex scheduling activities., • Reference 'Scheduling Playbook' to understand and adhere to company and Scheduling policies, practices, procedures, and activities., • Develop relationships with project stakeholders for communication of overall project plan and to support project performance and promote value of scheduling., • Collaborate with project team (e.g., Engineer and Superintendent) to confirm Contract Item List (CIL), develop Required On Job (ROJ) dates for schedule, and review Procurement Schedule to track and assess subcontractor commitments., • Collaborate with project team to develop project schedule based on Critical Path Method (CPM) logic-generated baseline schedules using scheduling software., • Review and recommend decisions related to performance of work regarding scheduling, delivery, logistics, and Trade staffing levels., • Study schedule deliverables prior to publication or distribution. Ask challenging questions regarding schedule content to enhance accuracy of schedule., • Collaborate with project departments (e.g., Preconstruction, Commissioning, Procurement, Construction) to prepare detailed schedules., • Engage with Virtual Design & Construction (VDC) team to align and coordinate schedules and models., • Define project schedule metrics and monitor and track critical path activities to achieve predicted forecasted end-date., • Contribute information required to update project schedule dashboard., • Create target comparison models and look-ahead schedules to provide progress updates, present findings, and explain risks to project stakeholders, and create recovery strategies to support project adherence to schedule., • Challenge project team based on previous, current, and future schedule data for As Built vs. Planned progress., • Review Pull Plan and revise schedule accordingly and incorporate Last Planner System into schedule., • Collaborate with project team to identify events and change order management and identify events that impact project schedule and to develop project schedule time impact analysis., • Conduct project site progress walks to capture scheduling progress data., • Generate scheduling reports and summaries based on client requests or needs. Provide monthly scheduling progress for Operations Review Meetings (ORMs) or other project review sessions., • Provide support and guidance to project end-users (individuals or groups) to develop proficiency in using scheduling software., • Collaborate with and participate in Business Development (BD) and Marketing teams to develop and prepare proposal scheduling activities and related materials., • Develop and update cost and/or resource loaded schedules as requested., • Apply continuous improvement methodology to daily tasks and activities and to improve Scheduling operations., • Other activities, duties, and responsibilities as assigned. Qualifications: • Bachelor's Degree from accredited degree program in Engineering, Construction Management, Building Construction, or related field, with minimum of 4 years of related experience or equivalent combination of education, training and experience, • Large construction project experience (>$50m), • Experience in construction positions (e.g., Field Engineer, Assistant Superintendent, or related), • Proficient use of scheduling software applications (e.g., Oracle Primavera P6), • Knowledge of scheduling comparison tools (e.g., Acumen Fuse, Change Inspector), • Knowledge of building construction, materials, systems, market conditions, and Trade practices, • Ability to interpret contract documents, drawings, specifications, and scopes of work to develop project schedule, • Knowledge of estimating to support project schedule development, • Familiar with earned value concepts and using construction resources to validate productivity and durations, • Ability to manage competing demands and meet deadlines, • Process and analytical skills to make decisions, • Proficient computer and data entry skills, Microsoft Office suite of applications, and collaborative tools, • Limited travel Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Performance of the required duties require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. While performing the duties of this job, the employee is frequently required to sit, climb, balance, stoop, kneel, crouch, crawl, use hands to finger, handle or feel objects, tools, or controls, and reach with hands, talk, and hear. The employee frequently views a computer monitor and frequently uses a computer keyboard. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. The employee is regularly required to be mobile, and the employee occasionally travels both short and long distances via a variety of conveyances. The employee occasionally performs work on-site at construction work sites, office locations, and/or off-site venues. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works at construction work sites where the employee is exposed to moving mechanical parts, high precarious places, fumes, or airborne particles, outside weather conditions, and risk of electrical shock. The noise in the work environment is usually moderate to loud. While performing the duties of this job, the employee occasionally works in an office or remote setting. The noise in the work environment is usually quiet to moderate in an office setting. The employee is required to work in compliance with company safety policies, procedures, and applicable laws. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Job DescriptionBenefits: • 401(k), • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off Essential Duties and Responsibilities Vehicle & Equipment Maintenance • Perform preventive maintenance on fleet assets including:, • Light- and medium-duty trucks (F-150/F-250, flatbeds, dump trucks, crew cabs), • Trailers (utility, enclosed, dump, gooseneck), • Commercial mowing equipment (zero-turn mowers, stand-on mowers), • Small engine equipment (blowers, trimmers, edgers, hedge trimmers), • Compact construction equipment (mini skid steers, mini excavators, loaders), • Conduct routine inspections and identify mechanical, electrical, and hydraulic issues., • Diagnose and repair engines, transmissions, brakes, suspension, steering, cooling systems, and electrical systems., • Perform welding, fabrication, and minor body repairs as needed., • Complete scheduled PM services (oil changes, filters, belts, hoses, fluids, lubrication)., • Accurately document all repairs and maintenance using work orders or fleet management software., • Maintain service records for compliance, warranty, and cost tracking., • Follow company safety policies, OSHA standards, and Lockout/Tagout (LOTO) procedures., • Ensure all vehicles and equipment meet operational and safety standards before release., • Maintain a clean and organized shop environment., • Communicate with Fleet Manager and operations teams regarding equipment status and repair timelines., • Respond to breakdowns in the field when necessary., • Support emergency repairs to keep crews operational., • High school diploma or GED (Technical school preferred)., • Minimum 13 years experience as a mechanic (fleet, diesel, or small engine preferred)., • Strong knowledge of:, • Gas and diesel engines, • Hydraulics and electrical systems, • Small engine repair, • Trailer and brake systems, • Ability to read service manuals and diagnostic software., • Proficient with hand tools and shop equipment., • Valid drivers license (CDL preferred or ability to obtain)., • Ability to lift up to 75 lbs and work in outdoor/industrial environments., • Experience servicing brands such as Ditch Witch, Takeuchi, Scagg, Vermeer, Toro, Echo, Stihl, John Deere, Honda or similar.Work Environment, • Indoor shop and travel to outdoor job sites required., • Exposure to noise, grease, fuel, and weather conditions., • May require extended hours during peak landscape seasons., • On-call or emergency repair availability may be required.Preferred Certifications (not required but beneficial), • ASE Certifications (A1A8 or T series), • DOT Inspector Certification, • Small Engine Repair Certification, • Welding Certification, • EPA 609 (A/C systems)

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a dedicated and talented Quality Control Inspector to our team on second shift. In this position, you will work closely on an integrated team of Cesium managers, engineers, and other cross-functional personnel in the production of state-of-the-art satellite communication systems.JOB DUTIES AND RESPONSIBILITIES • Executing Quality Control processes associated with purchased product, manufacturing operations, and customer quality requirements., • Inspection of printed circuit boards / assemblies (PCB / PCBAs), verification of electrical, electronic, and electromechanical (EEE) components, and cable assemblies., • Inspection using calipers, height gauges, thread gauges, and VMMs (Vision Measuring Machine)., • Documentation of inspection activities using electronic information systems, written logs, and labels., • Assist in the development, maintenance, and improvements of inspection methods, inspection plans, and internal quality procedures and processes., • Assist with the resolution to internal/external nonconformance using root cause, corrective action, and 8D methodologies., • Assist in data analysis and reporting of department metrics as required., • Assist with the continuous improvement initiatives., • Assist in the resolution of audit findings, observations, and recommendations., • Assist with the control and disposition of non-conforming material (MRB)., • Drive scheduling of day-to-day processes; ensure timely and accurate turnaround., • Other QC duties as assigned.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Associate degree in a technical field preferred. H.S. Diploma or equivalent required., • Minimum of 5 years relevant work experience including a minimum of 2 years of experience in PCB/PCBA inspection required., • Experience with AS9100 or ISO9001 Quality Management Systems., • Experience with microscopic visual inspection., • IPC-A-610 / J-STD-001 certification., • Experience with ERP and PLM software systems., • Proficiency with reading engineering documents, CAD drawings, and detailed work instructions., • Strong digital, written, and verbal communication skills., • Strong attention to detail and ability to follow procedures., • Strong interpersonal skills and ability to work with others in a positive and collaborative manner.PREFERRED EXPERIENCE

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin? Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The Senior Supplier Quality Surveillance Engineer is responsible supporting Procurement in the implementation and execution of Procurement Supplier Quality Inspections and audits. WHAT YOU'LL DO: * Perform quality assurance and quality control shop inspections and audits to ensure critical materials and engineered equipment purchased meet or exceed our customer's and contract quality and workmanship expectations * The Inspector will assist in ensuring the subcontracts or corporate agreements for good and services meet Rosendin Procurement quality standards and customer's expectations * Require a working understanding of Rosendin electrical equipment and materials related to fabrication, testing, and functionality * Be able to read and understand equipment specifications, drawings, provide feedback in regard to recommended supplier testing and inspections * Report to management and Project personnel about manufacturing problems, and assist in identifying and correcting these problems * Communicate inspection and audit results, both verbally and written, and recommend necessary corrective actions * Have a thorough knowledge of Procurement quality procedures, documents, and reporting structures * Assist Rosendin Procurement in Supplier/Subcontractor prequalification by providing input on the fabricator's quality program by performing supplier audits/assessments. * Provide support to Divisions and projects in overseeing fabricator and subcontractor quality as needed * Review Supplier/Subcontractor Non-Conformance Reports (NCR) and assist in developing corrective action plans. Coordinate with Quality Managers to approve final disposition and sign off NCR's * Provide input to Rosendin Procurement in rating the overall quality performance of suppliers and subcontractors * Highly skilled and experienced in written and verbal communications to include leading pre-fabrication meetings, creating pre-fabrication checklists, writing inspection/audit reports * Perform other duties as assigned WHAT YOU'LL NEED TO BE SUCCESSFUL: * Broad working knowledge of all design/craft disciplines and engineered equipment/materials associated with renewable energy and electrical projects and must be familiar with their special processes, inspection, and testing techniques * Broad working knowledge of the following: * Transformers: Power (oil filled and dry type), Distribution ( LV dry-type), and Isolation * Switchgear: MV/LV switchgear, metal-clad, metal-enclosed, gas insulated (GIS, Busway, Panelboards, Circuit breakers * UPS: static switches, PDU, Inverters * Generators * BESS and PV inverter modules * Wire and cable: DC feeder, MV cable, MCM, Wire harness, * Must be familiar with electrical procurement and vendor surveillance procedures as well as working knowledge of construction industry codes and standards related to the manufacture and testing of electrical components/systems such as IEEE, IECC, NEC, NFPA, NESC, IBC, IFC, etc.) * Be detail-oriented * Effective time management and organizational skills, * Excellent interpersonal, written and verbal communication skills, and * Must be team player but able to work independently, to meet intense deadlines, goals and objectives WHAT YOU BRING TO US: * 7+ years of professional supplier experience * 5+ years of professional supplier quality experience and 2-year associate's degree in electrical technology * 3+ years of professional supplier quality experience and 4-year bachelor's degree in electrical engineering * API SIEE Certification preferred * ISO 9001 Lead Auditor Certification preferred TRAVEL: * The position may require up to 85% travel and may require occasional travel outside of the USA • WORKING CONDITIONS: General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions such as fluorescent lighting and air conditioning * Noise level is usually low to medium; it can be loud on the jobsite. * We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. * Occasional lifting of up to 30 lbs. Rosendin is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits * ESOP - Employee Stock Ownership * 401 K * Annual bonus program based upon performance, profitability, and achievement * 17 PTO days per year plus 10 paid holidays * Medical, Dental, Vision Insurance * Term Life, AD&D Insurance, and Voluntary Life Insurance * Disability Income Protection Insurance * Pre-tax Flexible Spending Plans (Health and Dependent Care) * Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a dedicated and talented Quality Control Inspector to our team on second shift. In this position, you will work closely on an integrated team of Cesium managers, engineers, and other cross-functional personnel in the production of state-of-the-art satellite communication systems.JOB DUTIES AND RESPONSIBILITIES • Executing Quality Control processes associated with purchased product, manufacturing operations, and customer quality requirements., • Inspection of printed circuit boards / assemblies (PCB / PCBAs), verification of electrical, electronic, and electromechanical (EEE) components, and cable assemblies., • Inspection using calipers, height gauges, thread gauges, and VMMs (Vision Measuring Machine)., • Documentation of inspection activities using electronic information systems, written logs, and labels., • Assist in the development, maintenance, and improvements of inspection methods, inspection plans, and internal quality procedures and processes., • Assist with the resolution to internal/external nonconformance using root cause, corrective action, and 8D methodologies., • Assist in data analysis and reporting of department metrics as required., • Assist with the continuous improvement initiatives., • Assist in the resolution of audit findings, observations, and recommendations., • Assist with the control and disposition of non-conforming material (MRB)., • Drive scheduling of day-to-day processes; ensure timely and accurate turnaround., • Other QC duties as assigned.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Associate degree in a technical field preferred. H.S. Diploma or equivalent required., • Minimum of 5 years relevant work experience including a minimum of 2 years of experience in PCB/PCBA inspection required., • Experience with AS9100 or ISO9001 Quality Management Systems., • Experience with microscopic visual inspection., • IPC-A-610 / J-STD-001 certification., • Experience with ERP and PLM software systems., • Proficiency with reading engineering documents, CAD drawings, and detailed work instructions., • Strong digital, written, and verbal communication skills., • Strong attention to detail and ability to follow procedures., • Strong interpersonal skills and ability to work with others in a positive and collaborative manner.PREFERRED EXPERIENCE

Job DescriptionRaba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: • Community “We care for our communities”, • Integrity “We act with integrity”, • Passion “We infuse passion into everything we do”, • Quality “We believe quality comes from a culture of innovation and continuous improvement”, • Serve as consultant in area of expertise (structural steel, pipeline, pressure vessel, and reinforcing steel)., • Prepare inspection reports and other client required letters using RK format., • Maintain close contact with all clients during the entire duration of projects., • Notify Leader of potential group involvement in legal matters., • Work with legal counsel as required and directed., • Position will require traversing uneven construction sites, climbing ladders, performing inspections from a bucket lift, performing inspections from scaffolds, and working outdoors in hot, cold, and windy conditions., • High School Diploma or GED required., • Minimum 5 years steel inspection/welding experience., • Must be certified by the American Welding Society as a Certified Welding Inspector (AWS QC1)., • Must be certified by the American Society of Nondestructive Testing as NDT Level II or higher in both ultrasonic and magnetic particle testing. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is regularly stand, walk, use hands to finger, handle or feel, talk, or hear, reach with hands and arms, climb or balance, stoop, kneel, crouch, or crawl, and drive vehicle short and/or long distances. Frequently sit and occasionally, taste or smell and utilize hand tools such as sledgehammers, shovels, and picks. Occasional lift and/or move up to 50 pounds with or without assistance. Vison requirements include close, distance, and color. May be required to occasionally work in high, precarious places (tall structures, bucket lifts, extension ladders, etc.), fumes or airborne particles (painting, sanding, solvents, flying lint or dust particles, etc.), toxic or caustic chemicals (including potential for chemical spills, etc.), wet or humid conditions (not weather-related, such as greenhouse, carwash, etc.), extreme cold (not weather-related, such as freezer, cold storage, etc.), extreme heat (not weather-related, such as furnace, kitchen, ovens, etc. where temperature is regularly above 100 degrees F), risk of electrical shock (live electrical wires, equipment that retains power after shutoff), risk of radiation (x-ray equipment, nuclear radiation, electromagnetic radiation, etc.), vibration (jackhammer, soil compactor, equipment that creates high vibration, etc.). Frequently required to work in outdoor weather conditions (exposure to outdoor heat, cold or inclement weather). The noise level for this position is Loud (metal can manufacturing department, large equipment, etc.) This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/Veteran Drug Free Workplace

Job Description GEOMETRICS is an airport planning, design, construction management & inspection, and program/project management firm, with specialized focus on complex airfield and facility improvement projects and programs at large, medium and small hub, commercial and general aviation airports across the United States. Since its inception in 2015, Geometrics has successfully completed over 55 airfield projects at 30 airports in the states of Arizona, California, Colorado, Florida, Hawaii, Idaho, Illinois, Michigan, New Mexico, Nevada, Ohio, Oklahoma, Oregon, Pennsylvania, Texas, and Washington. Our core competencies are: • Airfield Design, • Geotechnical & Pavement Engineering, • Owner's Representatives PM, CM, & QA, • Terminal, Airside, & Landside Facilities planning and design, • Hydrology & Hydraulics Summary Geometrics Engineering is seeking experienced Electrical QA Inspectors (Low Voltage or Medium Voltage) to support terminal, airfield, and campus-wide construction projects at Austin-Bergstrom International Airport (AUS). This position will support the Austin Expansion and Development Program and is critical to ensuring construction activities comply with contract documents, approved plans, applicable codes, FAA and airport standards, and quality assurance requirements. QA Inspectors will provide on-site field verification, documentation, coordination with contractors, and support to Construction Managers and airport stakeholders throughout the construction lifecycle. Electrical Inspector – Low Voltage The Electrical QA Inspector – Low Voltage will support the inspection of low-voltage building and terminal systems within the airport environment. This role ensures that low-voltage systems are installed, tested, and commissioned in accordance with contract documents and airport standards. Focus Areas and Responsibilities • Inspect low-voltage systems including communications, security, fire alarm, access control, and data cabling., • Verify compliance with contract documents, NEC, NFPA, and airport authority standards., • Witness testing, continuity checks, grounding verification, labeling, and system integration., • Prepare detailed inspection reports documenting deficiencies and corrective actions., • Support commissioning, closeout, and final acceptance documentation., • Minimum 10 years of construction inspection or electrical experience, preferably including aviation projects., • Experience inspecting low-voltage systems in vertical construction environments., • Strong working knowledge of NEC, NFPA, and low-voltage system standards., • Ability to interpret electrical drawings, specifications, and testing documentation. The Electrical QA Inspector – Medium Voltage will support the inspection of airfield and vertical construction medium-voltage systems. This role focuses on underground and above-ground electrical infrastructure supporting airport operations. Focus Areas and Responsibilities • Inspect medium-voltage systems ranging from 600V up to 35kV., • Inspect duct banks, feeders, grounding systems, transformers, switchgear, and protective devices., • Verify compliance with contract documents, NEC, IEEE standards, and airport authority requirements., • Witness testing, energization, and commissioning activities., • Document inspection findings, deficiencies, and corrective actions., • Minimum 10 years of electrical construction or inspection experience, preferably in aviation environments., • Demonstrated experience with medium-voltage underground and vertical electrical systems., • Strong understanding of NEC, IEEE, and airport electrical standards., • Ability to interpret drawings, specifications, and testing documentation. We believe every team member is a catalyst for our success. Don't meet every single requirement? Apply anyway. Studies show that great candidates often pass on opportunities because they don't check every box. At Geometrics, we value authenticity over "perfect" checklists. If you're excited about this role, we want to see your application—you might be exactly who we're looking for. Benefits • Geometrics' health and dental coverage. Geometrics covers our employees 100%, and if spouse or dependents are covered Geometrics provides supplemental support to cover a percentage of the annual premium, • STD/LTD/AD&D/Life are provided to all employees at no cost, • Generous PTO package, 10 company holidays, and 2 floating holidays to be taken at employees' discretion, • Yearly 401(k) contributions (3% of annual salary, not dependent on employee contributions), • Other benefits include:, • BYOD cellphone reimbursement, • Toll reimbursements if applicable, • Visa/PERM sponsorship if applicable Pay Range$52—$66 USD

Electrical Inspector Low Voltage. Hill International is seeking an experienced Electrical Inspector Low Voltage Building/Vertical across multiple disciplines to support ongoing infrastructure improvements at ABIA. Coordinate daily activities with third-party inspectors and project stakeholders, in

The Electrical Inspector may provide guidance to other Construction Representatives. Freese and Nichols is seeking an Electrical Inspector in Austin, TX. As an Electrical Inspector, you will be responsible for observing construction on a variety of transportation, water, wastewater and/or facilities

Electrical Inspector Medium Voltage. Hill International is seeking an Electrical Inspector with Medium Voltage, Underground and Vertical Construction experience across multiple disciplines to support ongoing infrastructure improvements at ABIA. Inspect medium-voltage electrical systems (typically 6

AviationConstruction #AustinJobs #Inspector #ConstructionLife #JourneyWithAUS #Electrical-Inspector #Low-Medium-Voltage #CareerGrowth. Aviation Electrical Inspector (Low-Medium Voltage). Austin-Bergstrom International Airport is growing at an incredible pace, and we’re looking for a sharp Electric

Hill International is seeking an Electrical Inspector - Low Voltage in Austin, Texas. Hill International is seeking an experienced Electrical Inspector - Low Voltage Building/Vertical across multiple disciplines to support ongoing infrastructure improvements at ABIA. Inspectors will be responsible f

This role requires the ability to work lawfully in the U.Plus, enjoy perks like free and discounted internet, TV, and mobile, all while paving the way for a long and rewarding career with us.Do you enjoy solving technical challenges? Do you like working in in a dynamic environment? As a.Spectrum, yo

Diagnose malfunctions in electrical and electronic components. Maintain electrical/electronic elements of assemblies nickel-cadmium batteries. Electrical theory and system maintenance.

At McGuire Moorman Lambert Hospitality (MML), we are devoted to creating some of the world’s most memorable hospitality experiences, where exceptional cuisine, inspired design, impeccable service, and authentic storytelling come together in harmony.Founded by Larry McGuire, Tom Moorman, and Li

Inspects work to ensure compliance with the national electrical code, city electrical code; read wiring schematics. Electrical applications for high and low voltage electrical systems. To install, maintain, and repair college electrical equipment.

Position Overview: The Electrical Assembler will assemble, modify, and inspect electromechanical components and subassemblies while following detailed work instructions. Our client is seeking an Electrical Assembler to join their team in a full-time, onsite role.

Mechanical and electrical aptitude. Troubleshoot and repair electrical, mechanical, hydraulic, and pneumatic systems. Read and interpret electrical schematics, mechanical drawings, PLC logic, and technical manuals.

Our client is seeking an Electronic Assembler II to join their team on a full-time, onsite basis.This role requires hands-on work in a production environment supporting advanced electronics within the aerospace and defense industry.Position Overview: The Electronic Assembler II will be responsible f

At Poolie, we started with a simple goal: make pool maintenance.From day one, our mission has been to raise the bar in pool service, combining expertise, integrity, and a commitment to customer satisfaction.Health, dental, and vision insurance, short & long-term disability, PTO, and 10 paid holidays

At McGuire Moorman Lambert Hospitality, we strive to create the world's most memorable experiences, blending food, service, and design seamlessly under the leadership of Liz Lambert, Larry McGuire, and Tom Moorman.Our refined hospitality is achieved through storytelling, attention to detail, and exc

Civil Engineering Project Manager - Public Works & Utilities This Jobot Job is hosted by: Daylen Quichocho Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Salary: $130,000 - $150,000 per year A bit about us: We are a registered WBE and HUB firm located in

Strong background in electrical or computer engineering and a solid understanding of server architecture. BS or MS in Electrical or Computer Engineering.

Civil Engineering Project Manager | Join a top-rated Austin design firm known for its collaborative culture, flexible hybrid schedule & competitive pay starting at $130K.This Jobot Job is hosted by: Kelsey Bannon Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your re

Link Technologies (LinkTechConsulting.Las Vegas-based IT consulting firm, is currently seeking a Project Manager 3 to join our team.QUALIFICATIONS Minimum of 10 years of experience with the following: Managing project with implementations across large organizations.Developing and managing project pl

Title: Project Manager (Non-IT) - Junior Location: Austin, TX (Onsite) 12 Months Contract THE ROLE: As a Hardware Program Management Assistant, you will support the prototype board & hardware production & distribution process.You will be responsible for ensuring hardware deliveries to adhere to exec

As a Senior Electrical Engineer in our Global Field-Programmable Gate Array (FPGA) team, you will be responsible for delivering new Printed Circuit Board Assembly (PCBA) technologies and logic solutions that scale across our next-generation enterprise portfolio. You will collaborate with a deepl

Brookdale Senior Living - 1034 Liberty Park Drive - Responsibilities: Maintain interior and exterior of community buildings and grounds; Perform scheduled and unscheduled maintenance on HVAC, elevator, fire and sprinkler equipment, generators, landscape, kitchen equipment and emergency pull cord equ

ABM Industries - - Responsibilities: Complete assigned preventive maintenance and reactive maintenance repairs requiring conveyor, mechanical, plumbing, electrical, instrumentation, HVAC and other equipment, systems or structures; Ensure repairs and maintenance to all equipment and facilities; Resp

InterSolutions - - Responsibilities: Complete service tickets and work orders efficiently and accurately; Prepare vacant apartments for new residents by managing the turnover process; Keep grounds and common areas clean and free of debris; Deliver exceptional customer service to residents; Perform

Provide advice and support other engineers as needed or requested; Responsible for identifying and repairing all mechanical failure to include repair of appliances, HVAC, electrical or plumbing.

Manufacturing [Field Technician / Maintenance Mechanic] As an Equipment Maintenance Technician at Tesla, Inc.Perform Preventative Maintenance on industrial production and mechatronic equipment; Determine the root cause of equipment failures and convey appropriate measures to relevant teams; Perform

Flextronics - - Responsibilities: Repairs and maintains machinery and mechanical equipment such as conveyor systems and production machines and equipment; Through troubleshooting, identifies machine malfunctions and isolates the failure mechanism; Repairs the failure mechanism in the most cost-effe

ABM Industries - - Responsibilities: Travel to customer sites to inspect, test, troubleshoot, perform start-up and collect data on electrical systems.

National Assemblers - - Responsibilities: Assemble furniture (bed frames, desks, chairs, etc.Mount and install TVs, pictures, and other home fixtures; Set up entertainment systems, soundbars, and streaming devices; Provide top-notch customer service and educate customers; Maintain accurate records

BrightSpring Health Services - - Responsibilities: Performs preventative maintenance per preventive maintenance program; Assists with vehicle home or facility inspections as directed; Assists in pest control as required; As assigned by the Maintenance Supervisor, completes minor repairs such as pat

Dover - - Responsibilities: Troubleshoot and repair mechanical, electrical, and pneumatic malfunction in automated machinery; Install air lines and their associated components; Install electrical wiring, conduits, boxes, etc.

Sunbelt Rentals - - Responsibilities: Perform preventive maintenance on equipment; Diagnose and repair equipment; Troubleshoot hydraulic and electrical systems; Ability to be flexible with changing priorities in a fast-paced environment; Maintain tools and records.

ABM Industries - - Responsibilities: Travel to customer sites to inspect, test, troubleshoot, perform start-up and collect data on electrical systems; Supervise Trainees, Assistants, and Technicians in the completion of electrical testing duties; Maintain, test, repair, rebuild, and replace low, me