Engineering science jobs in Buffalo, New YorkCreate job alerts

1\. Role Overview Mercor is collaborating with a leading AI research lab on a project to advance frontier astronomy problem-solving. We are looking for astronomy experts who hold a PhD or Master’s degree, or have experience participating in the International Astronomy Olympiad (IAO). The goal of this project is to create novel, clear, and challenging Olympiad-style astronomy problems that cause frontier AI models to fail (i.e., generate an incorrect response) and to support the training of cutting-edge AI reasoning systems. This is a short-term, high-impact, remote opportunity for those excited about applying their expertise to frontier AI research, with the possibility of extension based on performance. ### 2\. Key Responsibilities - Write original & advanced IAO-style astronomy problems to challenge frontier AI models - Evaluate AI-generated solutions for correctness, clarity, and reasoning quality, and identify where models fail - Identify logical flaws, incomplete reasoning, or insufficiently rigorous derivations - Provide clear, concise, and correct solutions and reasoning, formatted in LaTeX - Maintain extremely high standards of precision, scientific rigor, and problem difficulty ### 3\. Required Qualifications Note: Applicants must be highly proficient in writing and formatting documents using LaTeX You are a good fit for the project if you have any of the following experiences: - Have a Master’s or PhD in astronomy (or a related field), or are an Olympiad participant or medalist in the IAO (preferred) or equivalent competitions (RAO, CAO, IAO TST, AAO, EuAO, USAAO, BAO, INAO, JAO, UAC, IAYPT, CAUT, etc.) Other qualifications: - Deep understanding of core theoretical and observational concepts in astronomy and astrophysics - Ability to articulate reasoning and derivations clearly in written form - Strong ability to evaluate the rigor and complexity of astronomy problems - Rigorous attention to detail in verifying solutions ### 4\. More About the Opportunity - Expected commitment: 20 hours/week minimum; up to 40 hours/week available - Project length: ~2 months, with potential for extension - Rolling start dates; setup typically within 1–2 days of approval ### 5\. Compensation & Contract Terms - $60–80/hr, dependent on experience and performance - Open to contributors worldwide (English proficiency required) - Independent contractor engagement - Payments issued weekly via Stripe Connect ### 6\. Application Process 1. Submit your resume or CV highlighting your astronomy background and relevant achievements 2. Complete a brief interview (20–30 minutes) 3. Submit a short form detailing your experience writing problems and competing in astronomy or related Olympiads 4. Selected applicants will be contacted within a few days with next steps ### 7\. About Mercor Mercor is a talent marketplace that connects top experts with leading AI labs and research organizations. Our investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey. Thousands of professionals across domains such as science, engineering, and research have partnered with Mercor to contribute to frontier AI projects shaping the next era of technology. We consider all qualified applicants without regard to legally protected characteristics and provide reasonable accommodations upon request.

Computer Science, Engineering, or related field 10+ years in software engineering, primarily on complex Java backend systems Experience with cloud deployments, microservices, and real-time data pipelines Deep knowledge of Java performance optimization and database design Familiarity with financi

Senior Associate - Lead Civil Engineer US-NY-Buffalo Job ID: 2025-3078 Type: Regular Full-Time of Openings: 1 Category: Civil/Structural Engineering The LiRo Group Overview We are currently seeking a highly skilled and motivated Sr. Associate/Western NY Lead Civil Engineer to join our team in our Buffalo, NY Office. The Sr. Associate will play a crucial role in overseeing various projects involving, site layout, civil engineering design and planning, ensuring their successful completion while adhering to quality standards, safety protocols, and project time-lines. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Metro Park, NJ. Responsibilities • Ability to lead a wide range of civil engineering analysis and design tasks related to: roadway design, zoning analysis, site plan preparation, site storm-water management, utility planning and layout, transportation planning/design, parking analysis and layout, vehicle maneuvering analysis, pavement and grading design, and site utility replacement., • Lead coordination and presentation of submissions with local municipalities, utilities, environmental agencies, and town/county planning boards., • Perform site investigations to observe and document existing conditions., • Complete and review design calculations; assist in the preparation of drawings, specifications, and bid packages., • Supervise the development of project plans, design calculations, specifications and lead the coordination with other design disciplines as required to deliver high quality engineering services., • Provide responses and solutions to issues during the construction administration phase of projects., • Utilize a broad assortment of technical and project management skills on projects that range from small site restorations to large scale new construction., • Pro-actively engage with existing clients and pursue new clients to support growth of the business in the region across LiRo’s service lines., • Lead the preparation of technical content for proposals for civil engineering services., • Attend industry and business development functions as a representative of the firm., • Supervise, mentor, and develop local engineering staff., • Perform monthly and quarterly updates of project financials and revenue projections. Qualifications • Bachelor of Science in Civil Engineering, • 12+ years of progressive experience in Site and Civil Engineering, • NY PE required, • Experience in working with various NYS county DOT/DPW/Highway Departments, NYSDOT, and/or other large, local municipalities., • Strong written and verbal communication and presentation skills, • Ability to provide constructive guidance to engineers and drafters, • Understanding and application of local code and permitting requirements, • Ability to collaborate with the Regional Manager and other business units for pursuit of business opportunities and growth of the practice, • Ability to multitask and consistently meet deadlines, • AutoCAD; Civil 3D or Microstation experience a plus Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. • We offer a comprehensive benefits package and a positive work environment, • Compensation: Minimum: $130,000; Maximum: $165,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay. Exact compensation will be determined on the individual candidate’s qualifications and location., • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. #ID22 #ZR22 PIb404c5cf44a5-37820-37205242

1 Role Overview Mercor is collaborating with a leading AI lab on a cutting-edge research initiative involving top superforecasters from around the world. We’re seeking geopolitical experts to contribute high-quality predictions and analytical reasoning on major international developments. This contract-based opportunity allows professionals to apply their domain expertise in a unique setting focused on enhancing AI reasoning models. 2 Key Responsibilities - Produce structured forecasts on geopolitical events, risks, and regional dynamics - Document your reasoning clearly, citing relevant sources and frameworks - Assess political, military, and diplomatic developments using open-source intelligence - Collaborate with other expert forecasters to compare and refine outputs - Support the design and evaluation of forecasting tasks 3 Ideal Qualifications - Background in political science, international relations, security studies, or related fields - Demonstrated forecasting experience or tournament participation (e.g., GJ Open, Metaculus) - Ability to synthesize complex geopolitical information into structured insights - Excellent written communication and research skills - Familiarity with current global events and international affairs 4 More About the Opportunity - Remote and asynchronous — work on your own schedule - Expected commitment: ~10–20 hours/week 5 Compensation & Contract Terms - $105–125/hour for U.S.-based applicants - You’ll be classified as an independent contractor 6 Application Process - Submit your Mercor profile or resume to get started - You’ll complete a brief form - We’ll follow up within a few days with next steps 7 About Mercor - Mercor is a talent marketplace that connects top experts with leading AI labs and research organizations - Our investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey - Thousands of professionals across domains like law, creatives, engineering, and research have joined Mercor to work on frontier projects shaping the next era of AI

Kelly Government Services is a strategic partner in staffing Physicians for the VHA across the United States.We are seeking experienced Two Board-Certified Hematology-Oncology Physicians to provide comprehensive hematology and oncology services to Veterans at the Providence VA Medical Center in Prov

Job DescriptionDescription: Are you an experienced survey professional looking to advance your career as a Survey Crew Leader in land surveying? Fisher Associates is hiring a Survey Party Chief to lead field survey crews with a strong focus on safety, precision, and project efficiency. In this leadership role, you’ll oversee on-site land survey operations, mentor team members, and ensure timely, accurate, and high-quality survey deliverables across various projects. At Fisher Associates, your surveying expertise is recognized, your professional development is supported, and your work-life balance is truly valued. Whether you're conducting boundary surveys, construction staking, or topographic mapping, you'll play a key role in shaping successful project outcomes and advancing your career. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You excel in the field, leading crews and solving challenges outdoors — your expertise drives results where it matters most., • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others. As a Survey Party Chief, you’ll take the lead on-site—guiding field crews, ensuring safety, and collecting accurate land survey data that supports successful project delivery. Your work will combine leadership, technical precision, and real-time problem-solving in dynamic outdoor environments. • Ensure survey crew safety through hands-on training, daily Tailgate Safety Meetings, and enforcement of Job Safety Analyses (JSAs)., • Lead and mentor field survey staff, fostering high performance and continuous skill development., • Maintain organized field notes, sketches, and survey control documentation aligned with project standards and regulatory requirements., • Collect, verify, and process survey field data using proper naming conventions to ensure clean transitions to office teams., • Coordinate daily with Project Managers and Land Surveyors to set project goals, track survey progress, and quickly resolve field challenges., • Follow client and company field protocols to guarantee survey data accuracy across a wide range of specifications and project types., • Perform control checks, traverse angle closures, and level run validations before submitting data for processing., • Track and document crew timesheets, vehicle use, and equipment condition to optimize daily operations. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Requirements: What You Bring, Your Expertise • High School Diploma or GED required, • Associate’s Degree of applied Science in Surveying, Geomatics or related degree preferred (or equivalent experience), • 3 plus years of experience as a Party Chief, • Experience with data collection survey equipment including Leica GPS, Scanning and Total Station systems highly preferred., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be able to lift to 50 pounds at a time., • Must possess a valid driver’s license and drive a company vehicle., • Traveling on a regular basis to project sites located throughout Pennsylvania and New York., • Ability to sit, stand, walk and transverse uneven grounds Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job Description ABOUT INSPIRE MEDICAL SYSTEMS Inspire is the first of its kind medical device designed to make a difference in the lives of those living with Obstructive Sleep Apnea (OSA). We are revolutionizing the sleep industry with our FDA-approved medical device, designed to reduce OSA severity for those who cannot tolerate or get consistent benefit from CPAP. Inspire Medical Systems is committed to enhancing patients' lives through sleep innovation. We are steadfast in our commitment to prioritize patient outcomes, act with integrity and lead with respect. With positive persistence at our core, we are committed to all those we serve. WHY JOIN OUR FAST-GROWING TEAM At Inspire, we value people – your diverse experiences, backgrounds, and thoughts. We elevate voices and encourage learning opportunities to build a professional network that grows into community. We embrace a people-first culture by offering excellent benefits, 401k matching, ESPP, flexible time off (FTO), and tuition reimbursement. If you're passionate about making a difference in people's lives and want to work with innovative technology, come be a part of our great team! ESSENTIAL JOB FUNCTIONS The Field Clinical Representative provides technical and clinical expertise, educational and field support to ensure the safe adoption of the Inspire therapy and products. The FCR is responsible for working with customers, physicians, clinic staff and Inspire field staff to drive procedural and practice success. #LI-Remote OPPORTUNITIES YOU WILL HAVE IN THIS ROLE • Provide technical support during implant procedures and at device activation., • Maintain credentials enabling access to assigned hospitals and clinics., • Provide technical leadership and education in assigned region to account clinical staff., • Provide post-training follow up including procedural reviews, in servicing and support., • Assist customers in device troubleshooting., • Collaborate with sales personnel on appropriate training/support for targeted customers., • Proactively disseminate peer-reviewed scientific and clinical information to customers and assigned sales team as needed., • Provide technical expertise for assigned regional education and training activities., • Stay current on relevant scientific publications and clinical evidence. WHAT YOU CAN BRING TO OUR GREAT TEAM Required: • Bachelors' degree and 2+ years of related clinical, healthcare or medical device industry experience (OR) Bachelor's degree and 1+ years applicable Inspire experience (OR) an Associates' degree or Professional Certification and 5+ years of related clinical/healthcare or medical device industry experience., • Ability to communicate and collaborate effectively in a clinical setting., • Strong computer skills with MS office including PowerPoint and Excel., • Problem solving/trouble shooting skills., • Degree in Nursing, Engineering, Science or technical discipline., • Previous Operating Room (surgical) coverage with implantable devices. #LI-Remote The salary for this position will be offered at a level consistent with the experience and qualifications of the candidate. This information reflects the anticipated salary range for this position at the time of posting. The salary range may be modified in the future and actual compensation may vary from the posting based on various factors such as geographic location, work experience, education and/or skill level. Salary$100,000—$130,000 USD BENEFITS AND OTHER COMPENSATION Inspire offers a highly competitive benefits package including (general description of the benefits and other compensation offered): • Multiple health insurance plan options., • Employer contributions to Health Savings Account., • Dental, Vision, Life and Disability benefits., • 401k plan + employer match., • Identity Protection., • Flexible time off., • Tuition Reimbursement., • Employee Assistance program., • All employees have the opportunity to participate in the ownership and success of Inspire. Employees at all levels can participate through equity awards and the Employee Stock Purchase Program. Inspire Medical Systems provides equal employment opportunity (EEO) to all employees and applicants without regard to race, color, religion, creed, sex, national origin, age, disability, marital status, familial status, sexual orientation, status regarding public assistance, membership or activity in a local commission, military or veteran status, genetic information, pregnancy or childbirth, or any other status protected by applicable federal, state, and local laws. This policy applies to all aspects of the employment relationship, including recruitment, hiring, compensation, promotion, transfer, disciplinary action, layoff, return from layoff, training, and social and recreational programs. Inspire Medical Systems complies with applicable laws governing non-discrimination in employment in every location in which Inspire Medical Systems has facilities. All such employment decisions will be made without unlawfully discriminating on any prohibited basis. Inspire Medical Systems is an equal opportunity employer with recruitment efforts focused on ensuring a diverse workforce. Applicants with a disability that need accommodation to complete the Inspire Medical Systems application process should contact Human Resources at 844-672-4357 or email careers@inspiresleep(dot)com Inspire Medical Systems participates in E-Verify.

Our Mission At Palo Alto Networks®, we’re united by a shared mission—to protect our digital way of life. We thrive at the intersection of innovation and impact, solving real-world problems with cutting-edge technology and bold thinking. Here, everyone has a voice, and every idea counts. If you’re ready to do the most meaningful work of your career alongside people who are just as passionate as you are, you’re in the right place. Who We Are This role is remote, but distance is no barrier to impact. Our hybrid teams collaborate across geographies to solve big problems, stay close to our customers, and grow together. You will be part of a culture that values trust, accountability, and shared success where your work truly matters. Job Description The Team As part of the Unit 42 Managed XSIAM organization, the team helps customers operationalize and optimize their Managed XSIAM deployments—delivering proactive, white-glove guidance that enhances their detection, investigation, and response capabilities. Our mission is to help customers maximize the value of Cortex XSIAM while continuously improving their overall security posture and SOC maturity. Job Summary The Technical Service Delivery Lead (XSIAM) acts as the technical focal point for Managed XSIAM customers, driving onboarding, adoption, and ongoing success. You’ll combine deep product expertise with a consultative approach to guide customers through their security journey—translating their goals into measurable outcomes and ensuring fast, meaningful ROI from their Managed XSIAM investment. You will collaborate closely with our SOC engineering, threat hunting, and product teams to tailor the service to each customer’s environment, ensuring seamless delivery and exceptional customer experience. Key Responsibilities • Value Delivery: Deliver white-glove onboarding and ongoing technical guidance for Managed XSIAM customers, • Collect and analyze customer security data to identify improvement opportunities in detection coverage, alert quality, tenant hygiene, and potential automation use cases, • Advise customers on best practices for alert tuning, data onboarding, and correlation optimization, • Drive continuous improvement in customer security posture and measurable time-to-value outcomes, • Operational Excellence: Manage incoming customer requests, prioritize effectively, and collaborate with the SOC engineering team to ensure timely, high-quality delivery, • Lead customer touchpoints, including onboarding sessions, security reviews, and proactive engagement meetings, • Translate complex detection and response concepts into actionable guidance for diverse audiences, • Collaboration & Enablement: Partner with Unit 42’s SOC engineering, Product, and MDR teams to ensure consistent service quality and cross-functional alignment, • Collaborate with the SOC engineering team to design and implement automation workflows that enhance detection, response, and reporting efficiency, • Champion customer needs internally, advocating for enhancements and escalations where needed, • Contribute to documentation, best practices, and scalable frameworks for the Managed XSIAM service Qualifications Preferred Qualifications • 5+ years of professional experience in Customer Success, Technical Account Management, Security Consulting, Solutions Architecture, or SOC operations (preferably within enterprise cybersecurity or SaaS environments), • Strong understanding of XDR, SIEM, and SOAR technologies, including incident and alert management, correlation development, and data source onboarding, • Demonstrated experience collaborating with security analysts, engineers, and threat hunters in operational environments, • Excellent communication skills—able to explain complex security concepts clearly to both technical and non-technical audiences, • Analytical mindset with strong problem-solving abilities and sound judgment in prioritizing tasks and managing complex customer needs, • Deep curiosity and a growth mindset—comfortable learning and adapting to evolving technologies and detection methodologies, • Bachelor’s degree in Computer Science, Information Security, or a related field or equivalent military experience Additional Information Salary Disclosure The compensation offered for this position will depend on qualifications, experience, and work location. For candidates who receive an offer at the posted level, the starting base salary (for non-sales roles) or base salary + commission target (for sales/commissioned roles) is expected to be between $127600/YR - $206500/YR. The offered compensation may also include restricted stock units and a bonus. A description of our employee benefits may be found ___. Our Commitment We’re problem solvers that take risks and challenge cybersecurity’s status quo. It’s simple: we can’t accomplish our mission without diverse teams innovating, together. We are committed to providing reasonable accommodations for all qualified individuals with a disability. If you require assistance or accommodation due to a disability or special need, please contact us at . Palo Alto Networks is an equal opportunity employer. We celebrate diversity in our workplace, and all qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or other legally protected characteristics. All your information will be kept confidential according to EEO guidelines.

**NO 3rd Parties or Sponsorship! Role Title- IT Operations Lead- Incident Management Duration- 12+ months Location- Buffalo NY Preferred or remote with travel. Role Description: The IT Operations Lead is responsible for planning and orchestrating releases across environments, safeguarding production stability, and driving continuous improvement through disciplined Incident and Problem Management. This role partners closely with Test Management, Change Management/Comms, Governance, and Service Management to deliver reliable outcomes for strategic portfolios and regulatory commitments. Key Responsibilities Release Management • Own the release calendar, scope, and readiness criteria across dev, test, UAT, and production environments., • Chair Scoping and Go/No-Go Tollgate meetings; ensure controls, sign offs, and rollback plans are in place., • Coordinate deployments with engineering, QA, business SMEs, and Change Management; align with governance and risk requirements., • Maintain deployment runbooks, environment plans, and dependency maps; drive automation and CI/CD best practices., • Track release outcomes (defect leakage, change failure rate, MTTR, deployment frequency) and report to leadership., • Incident Management, • Lead major incident response (P1/P2): mobilize resolvers, manage comms, and restore service quickly., • Operate the incident command process war room facilitation, real-time decisioning, stakeholder updates, and post-restoration verification., • Ensure high-quality incident records, accurate impact/time-to-recover metrics, and effective business communication., • Problem Management, • Drive root cause analysis (RCA) and corrective actions (CA) for recurring issues., • Maintain the Known Error Database (KEDB) and trend analysis; proactively eliminate failure modes and reduce risk., • Partner with engineering and testing to prioritize fix-forward items and embed learnings into release plans., • Governance, Controls & Compliance, • Align releases and service restoration activities with SOX/GLBA, auditability standards, and internal governance., • Ensure adherence to Change Management policies, risk assessments, and production deployment controls., • Provide quarterly control attestations and evidence for audits., • Stakeholder Engagement & Communication, • Serve as the single point of contact for portfolio leaders on release readiness and service stability., • Draft executive-ready communications (pre-release advisories, outage notifications, post-incident reports)., • Build transparent, trust-based relationships with Finance, Operations, PMO, and vendor partners. Requirements: • Bachelor's degree in Information Systems, Computer Science, Engineering, or equivalent experience., • ITIL 4 (Managing Professional or Strategic Leader)., • DevOps certifications (e.g., DASA, DevOps Institute) or SRE training., • Project/program certifications (PMP, SAFe, Scrum) are a plus., • Key Performance Indicators (KPIs), • Change Failure Rate, Change Related Defects and Incidents., • Time-to-Respond, Time-to-Restore, Recurring Incidents., • % of releases with complete controls & evidence; audit findings remediated on time., • Stakeholder satisfaction scores and communication effectiveness., • Tools & Technologies, • ITSM: ServiceNow, JIRA Service Management, • CI/CD: GitHub Actions, • Reporting: PowerBI, • Documentation & collaboration: Microsoft Teams, SharePoint, Confluence, • What Success Looks Like (First 6-12 Months), • A predictable, well-governed release cadence with clear readiness criteria., • Faster restoration through a major incident playbook and trained responders., • Fewer repeat incidents due to actionable RCA/CA and KEDB adoption., • Automation of deployment and evidence capture for audit-ready releases., • Clear, proactive communications that build stakeholder confidence.

The Data Solution Architect is responsible for designing and delivering enterprise-grade data platforms and solutions that enable advanced analytics and business intelligence. This role requires deep expertise in data engineering, cloud-native architecture, and modern data technologies. The architect will work closely with engineering, product, and compliance teams to build secure, scalable, and regulatory-compliant data solutions. All solutions must align with the principles, standards, and reference architectures established by the Enterprise Architecture function, ensuring consistency, interoperability, and strategic fit across the organization. Key Responsibilities • Solution Architecture: Architect and deliver cloud-based data platforms (e.g., Azure Data Lake) and scalable data pipelines using technologies such as Databricks, Kafka, etc., • ETL/ELT Frameworks: Develop and implement ETL/ELT frameworks for ingesting, transforming, and integrating data from diverse sources, including legacy financial systems, SaaS platforms, and real-time data streams., • Data Platform Deployment: Design and oversee deployment of data warehouses, lakehouses, and analytics sandboxes to support business intelligence, machine learning, and reporting needs inclusive of Power BI and Snowflake., • Data Governance: Define and enforce data governance, metadata management, and data quality standards in accordance with Enterprise Architecture guidance and regulatory requirements., • Enterprise Architecture Collaboration: Collaborate with Enterprise Architecture to ensure all solutions adhere to architectural standards, reference models, and technology roadmaps., • Technology Evaluation: Lead technical evaluations and proof-of-concept projects for emerging data technologies (e.g., real-time analytics, data mesh, AI/ML platforms)., • Technical Documentation: Produce deliverables such as architecture diagrams, data flow maps, security models, and technical documentation for solution handoff and operational support., • Agile/DevOps Leadership: Guide Agile/DevOps teams in implementing CI/CD pipelines, automated testing, and infrastructure-as-code for data solutions. Expected Skills • Data engineering platforms, big data technologies, and cloud-native development (microservices, Kubernetes)., • API design (REST) and integration tools (ETL/ELT)., • Stakeholder communication (technical and non-technical audiences)., • Leadership in Agile/DevOps environments., • Analytical problem-solving for complex data systems., • Project management: proficiency in tools like Jira; familiarity with SDLC and CI/CD pipelines. Expected Knowledge • Foundational Understanding: Data modeling, data pipeline orchestration, data quality management, metadata management, and data lifecycle., • Data Platforms: Data lakes, warehouses, and lake house architectures; distributed systems and cloud data services., • Data Engineering: ETL/ELT processes, real-time and batch data processing, data integration, and automation., • Financial Systems: Payment networks, liquidity management, and settlement processes (as relevant to data flows)., • Regulatory Landscape: Global data privacy regulations (GDPR, CCPA) and compliance tools., • Security: Data encryption, access controls, and penetration testing methodologies. Qualifications • Education: Bachelor’s/Master’s in Computer Science, Engineering, or related field., • Certifications: AWS/Azure Solutions Architect, Certified Data Engineer, or similar, • Experience: 5+ years in solution architecture or technical implementation, with 2+ years in data engineering or enterprise data platforms., • Proficient in system design, integration, and implementation across multiple technology domains., • Proven track record in deploying scalable financial systems (e.g., payment gateways, digital wallets, stablecoin or cryptocurrency systems preferred), • Hands-on experience with cloud platforms (Azure/AWS/GCP), containerization (Kubernetes), and DevOps practices., • Excellent communication, collaboration, and critical thinking skills., • Understanding of financial regulations, compliance, and security standards. Expected Deliverables • End-to-end solution architectures for data platforms, including detailed diagrams, technology stack specifications, and integration patterns., • ETL/ELT pipeline designs and implementation plans for onboarding new data sources and modernizing legacy systems., • Data governance frameworks, including policies for data quality, lineage, and access control, aligned with Enterprise Architecture standards., • Technical documentation packages: architecture blueprints, operational runbooks, and security protocols., • Prototypes and proof-of-concept implementations demonstrating new data engineering capabilities (e.g., streaming analytics, automated data quality checks)., • Performance benchmarks and scalability assessments for deployed solutions., • Risk mitigation plans, including security audit findings and disaster recovery strategies. This role combines technical depth with strategic vision to build data platforms that bridge traditional finance and modern analytics ecosystems. The ideal candidate will balance innovation with operational rigor to deliver secure, compliant, and user-centric data solutions.

1\. Role Overview Mercor is collaborating with a leading AI research lab on a project to advance engineering problem-solving at the frontier of artificial intelligence. We are seeking experienced engineers with strong backgrounds in analytical problem design, real-world systems modeling, or competitive engineering problem-solving (university competitions, design challenges, or advanced coursework). The goal of this project is to create novel, rigorous, and multi-step engineering problems that challenge cutting-edge AI models—specifically those that cause the AI to fail or demonstrate reasoning limits—while supporting the improvement and training of advanced AI systems. This is a short-term, high-impact, fully remote opportunity for engineering professionals eager to apply their deep technical expertise to frontier AI research, with the possibility of project continuation based on performance. ## 2\. Key Responsibilities - Design original, advanced engineering problems that require creative reasoning, multi-domain integration, and precise analytical thinking. - Evaluate AI-generated engineering solutions for technical accuracy, completeness, and adherence to physical and practical constraints. - Identify logical gaps, incorrect modeling assumptions, or computational inaccuracies. - Provide complete, clear, and well-documented solutions and derivations using LaTeX formatting for equations and schematics. - Maintain high standards of technical precision, rigor, and conceptual depth. ## 3\. Required Qualifications Note: Applicants must be proficient in creating and formatting technical documents using LaTeX. You are a strong fit for this project if you have one or more of the following: - Advanced degree (or equivalent experience) in mechanical, electrical, civil, aerospace, or chemical engineering, or a related field. - Experience designing or grading complex analytical or design-focused problems (university level or professional exams). - Participation in or mentorship for engineering design or modeling competitions is preferred(e.g., Formula SAE, Shell Eco-marathon, ASME/IEEE/AIChE contests, robotics challenges, or design sprints). - Research or teaching experience involving applied problem formulation and quantitative modeling. Other qualifications: - Deep understanding of core engineering principles and real-world systems. - Ability to communicate step-by-step reasoning, assumptions, and derivations clearly. - Strong intuition for problem difficulty, structure, and conceptual progression. - Detail-oriented verification of results and internal consistency. ## 4\. More About the Opportunity - Time commitment: Minimum 20 hours/week; up to 40 hours/week available - Duration: Approximately 2 months, with strong potential for extension - Rolling onboarding; start typically within 1–2 days after approval ## 5\. Compensation & Contract Terms - $60–80 per hour, depending on experience and demonstrated performance - Open to contributors worldwide (English proficiency required) - Independent contractor arrangement - Weekly payments via Stripe Connect ## 6\. Application Process 1. Submit your resume or CV highlighting your engineering background and relevant accomplishments. 2. Participate in a short interview (20–30 minutes). 3. Complete a brief form outlining your experience with problem design, engineering challenges, or teaching. 4. Selected applicants will receive follow-up steps within a few days. ## 7\. About Mercor Mercor is a talent marketplace connecting top professionals with leading AI research organizations and technology labs. Its investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey. Thousands of professionals across science, engineering, and research disciplines have partnered with Mercor to contribute to frontier AI initiatives shaping the next era of innovation. We encourage all qualified applicants to apply. Mercor provides equal opportunity and reasonable accommodations upon request.

Overview: We are looking for a Bilingual STEM Expert (Spanish and English) to review, evaluate, and refine AI-generated content involving scientific, mathematical, and technical reasoning across both languages. Your expertise in STEM fields and bilingual communication will be critical to ensuring technical accuracy, translation quality, and instructional clarity. * * * Job Details: Content Evaluation & Auditing: - Review AI-generated STEM content (science, technology, engineering, and mathematics) to ensure technical correctness, logical flow, and conceptual clarity. - Evaluate explanations, problem-solving steps, and final outputs for precision in both Spanish and English. - Identify and document translation errors, scientific inaccuracies, or ambiguities in AI outputs. Multilingual Translation Validation: - Verify that Spanish and English translations preserve the original content's technical meaning, scientific terminology, and intended logic. - Detect and resolve language-specific nuances that could impact learner comprehension. Annotation & Feedback: - Provide clear, structured feedback to improve the quality of AI-generated content and annotation. - Review and suggest refinements to guidelines for STEM topics, problems, and reasoning processes. * * * Ideal Qualifications: Generalist, STEM & Linguistic Proficiency: - Fluent in Spanish and English, with proven experience working on content across both languages. - Solid background in science, engineering, mathematics, or a related technical field. - Experience in bilingual instruction, scientific writing, technical translation, or curriculum development is highly desirable. Analytical Thinking & Problem Solving: - Strong ability to break down complex scientific and technical topics clearly. - High attention to detail and logical consistency in STEM reasoning. - Communication & Feedback Skills: - Familiarity with reviewing or developing educational STEM content, especially for AI or digital learning platforms. * * * Minimum Qualifications: - Master’s degree or PhD in STEM fields (e.g., Engineering, Science, Mathematics, Technology, or related disciplines). - Fluency in both Spanish and English (spoken and written). - 2+ years of experience in the STEM/Generalist field. - Prior experience with annotation, curriculum design, or AI content review is a plus. * * * ### Additional Details: - The role is remote and asynchronous, i.e., you can primarily work on your schedule. - This project will require approximately 15-20 work hours per week. - This position is structured with clear expectations. * * * Application and Onboarding Process: - After submitting your resume, you will have a 15-minute conversation with our AI interviewer to test your research and reasoning skills. - Within a few days, we will reach out for a follow-up call or decision on your application and move forward with project onboarding soon after. About : - Our team is based in San Francisco, CA - Our investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey

Overview: We are looking for a Bilingual STEM Expert (German and English) to review, evaluate, and refine AI-generated content involving scientific, mathematical, and technical reasoning across both languages. Your expertise in STEM fields and bilingual communication will be critical to ensuring technical accuracy, translation quality, and instructional clarity. * * * Job Details: Content Evaluation & Auditing: - Review AI-generated STEM content (science, technology, engineering, and mathematics) to ensure technical correctness, logical flow, and conceptual clarity. - Evaluate explanations, problem-solving steps, and final outputs for precision in both German and English. - Identify and document translation errors, scientific inaccuracies, or ambiguities in AI outputs. Multilingual Translation Validation: - Verify that German and English translations preserve the original content's technical meaning, scientific terminology, and intended logic. - Detect and resolve language-specific nuances that could impact learner comprehension. Annotation & Feedback: - Provide clear, structured feedback to improve the quality of AI-generated content and annotation. - Review and suggest refinements to guidelines for STEM topics, problems, and reasoning processes. * * * Ideal Qualifications: Generalist, STEM & Linguistic Proficiency: - Fluent in German and English, with proven experience working on content across both languages. - Solid background in science, engineering, mathematics, or a related technical field. - Experience in bilingual instruction, scientific writing, technical translation, or curriculum development is highly desirable. Analytical Thinking & Problem Solving: - Strong ability to break down complex scientific and technical topics clearly. - High attention to detail and logical consistency in STEM reasoning. - Communication & Feedback Skills: - Familiarity with reviewing or developing educational STEM content, especially for AI or digital learning platforms. * * * Minimum Qualifications: - Master’s degree or PhD in STEM fields (e.g., Engineering, Science, Mathematics, Technology, or related disciplines). - Fluency in both German and English (spoken and written). - 2+ years of experience in the STEM/Generalist field. - Prior experience with annotation, curriculum design, or AI content review is a plus. * * * ### Additional Details: - The role is remote and asynchronous, i.e., you can primarily work on your schedule. - This project will require approximately 15-20 work hours per week. - This position is structured with clear expectations. * * * Application and Onboarding Process: - After submitting your resume, you will have a 15-minute conversation with our AI interviewer to test your research and reasoning skills. - Within a few days, we will reach out for a follow-up call or decision on your application and move forward with project onboarding soon after. About : - Our team is based in San Francisco, CA - Our investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey

Mercor is seeking undergraduate and master’s-level experts in physics, chemistry, or astronomy to support a high-impact project with one of the world’s leading AI labs. This work involves contributing scientific expertise to the development of cutting-edge large language models. Freelancers will help curate complex, domain-specific problems that train the next generation of frontier AI systems. This is a fully remote, short-term engagement with potential to scale. Key Responsibilities - Create and review challenging, discipline-specific problems in physics, chemistry, or astronomy - Design detailed solutions and LaTeX-formatted content for AI training purposes - Provide feedback to refine problem structures - Collaborate asynchronously with the research team on problem quality and relevance Ideal Qualifications - Current undergraduate or master’s student in physics, chemistry, astronomy, or a closely related field at a top US, UK, Australian, NZ or Canadian university. - OR 1+ year of full-time experience in a physics, chemistry, or astronomy-related field - Advanced proficiency in LaTeX for scientific problem formatting - Previous participation in a science olympiad - Exceptional attention to detail and critical thinking skills - Strong written and verbal communication skills in English More About the Opportunity - Remote and asynchronous — set your own schedule - Expected contribution: 15–20 hours per week, with potential to scale to 40+ hours - Project start: October; rolling applications accepted throughout - Initial commitment: 1 months, with potential for extension Compensation & Contract Terms - Classified as an independent contractor - Paid weekly via Stripe Connect - Compensation based on hours worked; competitive rates for domain experts Application Process - Submit your resume to get started - Complete a brief form and AI-based screening interview (total time: ~20–30 minutes) - Open to applicants residing in the U.S., Canada, U.K., Australia, or New Zealand About Mercor - Mercor is a talent marketplace that connects top experts with leading AI labs and research organizations - Our investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey - Thousands of professionals across science, law, engineering, and the arts partner with Mercor on frontier AI research projects

The information collected by this application is solely to determine suitability for employment, verify identity, and maintain employment statistics on applicants. Bachelor's Degree in Food Science, Food Engineering or related field with 2+ years product development related experience in food prepar

Research Scientist / Engineer - Electronics R&D. Engineering, Material Science, Chemistry, or related technology, plus 10+ years of proven track record of driving. Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion.

Bachelor's degree in statistics, economics, finance or related field in the quantitative social, natural, physical or engineering sciences, with proven coursework proficiency in statistics, econometrics, economics, computer science, finance or risk management and a minimum of 9 years' proven quantit

Educate customer on the construction process. Create an accurate sketch and initial scope of work for construction projects. BA in engineering, construction science or similar relevant field preferred.

Leads all data experiments tasked by the Data Science Team. Works closely with all business units and engineering teams to develop strategy for long term data platform architecture.

Job DescriptionJob Title: Water Treatment Department ManagerLocation: Buffalo, NYHire Type: Direct HirePay Range: $120,000 – $180,000Work Model: Hybrid (with required travel to job sites and client meetings; occasional overnight Recruiter Contact: Samantha Marranca | 716-256-1271 | & Scope:Positional OverviewThe Water Treatment Department Manager will oversee the water treatment engineering group and provide leadership in coordinating project teams, managing utilization, and mentoring staff. This individual will also serve as a technical lead on medium to large-scale projects involving water treatment and storage systems. The role requires balancing management responsibilities with direct client interaction and engineering leadership.Role & Responsibility:Tasks That Will Lead To Your Success • Serve as a trusted advisor to established water clients and assist in developing new project opportunities., • Coordinate project scheduling, team commitments, and deadlines across the department., • Lead and mentor a team of 5–10 engineers, providing technical training and coaching., • Optimize treatment plant operations, including pretreatment, filtration, chemical disinfection, residuals, energy systems, and water storage., • Perform asset evaluation and long-term capital planning., • Conduct hydraulic modeling of treatment system processes and storage systems., • Provide technical expertise to utility staff in critical operational situations., • Represent the Water Treatment Engineering team to corporate management and stakeholders. Skills & ExperienceQualifications That Will Help You Thrive, • Bachelor of Science in Civil, Chemical, Environmental Engineering, or related field (required)., • Professional Engineer (PE) license (required)., • 10+ years of experience in the water treatment discipline., • Proficiency with MS Office; familiarity with CAD/Revit preferred., • Strong leadership, management, and mentoring experience., • Valid driver’s license and ability to travel., • Ability to work independently with minimal supervision.

Certification as an Engineer in Training (EIT) or passing the Fundamentals of Engineering (FE) exam in states where an EIT is not obtainable (within 18 months of hire or promotion or transfer). Bachelor's degree in Science or Civil, Environmental or Chemical Engineering or related discipline. CDM Sm

Leads all data experiments tasked by the Data Science Team. Works closely with all business units and engineering teams to develop strategy for long term data platform architecture.

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred

Job Description Join Kistler – A Global Leader in Measurement Technology! Kistler is the global leader in dynamic measurement technology for measuring pressure, force, torque, and acceleration. Cutting-edge technologies provide the basis for Kistler's modular solutions. Customers in industry and science benefit from Kistler's experience as a development partner, enabling them to optimize their products and processes so as to secure a sustainable competitive edge. The owner-managed Swiss company's unique sensor technology plays a key role in the evolution of automobile development and industrial automation. Kistler is making an important contribution to the further development electrified drive technology, automated and connected driving, emission reduction and smart factories. Our Buffalo location focuses on Piezoelectric, Piezoresistive, & MEMS Sensors, electronics, and instruments. Purpose of the Position This position is responsible for managing documents, equipment, tooling, and fixturing required to manufacture the diverse portfolio of products made by Kistler Instrument Corp. (KIC) Production Facility. The manufacturing engineer develops and troubleshoots manufacturing processes in order to improve product quality, cost, and/or lead-time. This includes investigation and proposal of new production equipment, process procedures, and methods to automate, improve, and/or scale-up new and existing processes. Main Tasks • Provides technical support and improve manufacturing lines by specifying and/or refining BOMs, routings, work instructions, and test procedures., • Design, document, procure, qualify, implement, and improve fixtures, tools and equipment., • Provides documentation and training on assembly methods, test procedures, and production equipment., • Troubleshoots day-to-day process performance issues, develop solutions, and monitor improvements., • Works closely with R&D engineering, quality, purchasing, and planning to ensure products meet specified requirements., • Analyze and plan work force utilization, space requirements, and workflow. Design layouts of equipment and workspaces in conjunction with Kistler’s Lean Initiatives for maximum production efficiency., • Collaborates with R&D engineering design staff to develop manufacturing methods for new products., • Responsible for change management and implementation for changes to manufacturing processes., • Identify and lead continuous improvement efforts using Lean and Six Sigma tools to optimize production operations., • Performs other duties as assigned., • Bachelor’s degree (B.S.) from a four-year technical or engineering college or university and a minimum of 2-5 years’ related experience or equivalent of education and experience., • Strong communication, interpersonal, and teamwork skills., • Able to manage multiple projects and prioritize work appropriately to meet commitments., • Demonstrated proficiency in Microsoft Word, PowerPoint, Outlook, and Excel., • Experience with ERP/MRP systems (SAP preferred) relevant to manufacturing operations., • Experience with engineering change systems., • Ability to interpret and create (Solidworks preferred) complex technical drawings, schematics, and specifications., • Experience with LabVIEW or TestStand a plus. At Kistler, we value your expertise and offer opportunities for professional growth in a global environment. Our competitive benefits package includes: Medical, dental, vision, life, and disability coverage 401(k) plan with a 4% company match Generous personal and vacation time Join a team that’s shaping the future of measurement technology. We look forward to meeting you! Kistler Instrument Corporation is an Equal Opportunity Employer.

Job Description Overview Are you ready to join a growing team? CTG is seeking an Enterprise Architect for our client, M&T Bank, to lead the design and execution of technology strategies and solutions in Consumer Banking. This role drives architecture for complex, high-priority initiatives, ensuring scalable, secure, and forward-looking solutions. Location: Buffalo, NY Duration: 6 months Key Responsibilities: * Define and maintain enterprise architecture strategies, roadmaps, and standards. * Develop high-level and detailed solution architectures for delivery teams. * Ensure compliance with financial regulations, risk frameworks, and data privacy standards. * Collaborate with business and technology leaders to align solutions across digital platforms, core banking, and client services. * Provide governance and oversight throughout the solution delivery lifecycle. * Advise senior leadership and communicate architectural concepts to technical and non-technical audiences. * Evaluate emerging technologies and vendor solutions for enterprise adoption. Requirements: * Bachelor’s degree in Computer Science, IT, Engineering, or related field. * 7+ years in cloud architecture; 3+ years focused on Retail/Consumer banking technology. * Strong knowledge of solution design, enterprise architecture frameworks (TOGAF, Zachman), and financial services. * Experience with software engineering, application integration, and architectural governance. * Excellent communication and stakeholder engagement skills. Preferred: * Experience with retail banking platforms (Hogan, Genesys, ATMs, workflow, robotics). * Knowledge of institutional banking products, digital banking innovations, and emerging technologies. Excellent verbal and written English communication skills and the ability to interact professionally with a diverse group are required. CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact Tana Stilloe at . Kindly forward this to any other interested parties. Thank you!

Job Description Date posted: November 4, 2025 Position Type: Full-time (40 hours per week) Compensation: $19.00-$22.00 per hour ($39,520-$45,760 annually) Benefits: 50% employer-paid silver health plan (single coverage), all federal holidays paid, 5 sick days and 5 vacation days per year POSITION OVERVIEW We are seeking a versatile professional to fill a unique dual-role position at King Urban Life Center. This full-time position combines leadership of our after-school STEAM program with administrative support to our Executive Director. The ideal candidate will have both educational experience working with diverse urban youth and strong administrative skills. PRIMARY RESPONSIBILITIES STEAM Program Leadership (approximately 20 hours per week) • Design and implement age-appropriate STEAM curriculum and activities for school-age children, • Lead hands-on learning sessions in science, technology, engineering, arts, and mathematics, • Create an inclusive, engaging learning environment that celebrates diverse learning styles, • Develop programming that builds critical thinking, creativity, and problem-solving skills, • Maintain safe learning spaces with proper supervision and safety protocols, • Build positive relationships with children and their families, • Track program outcomes and document student progress, • Coordinate with schools and community partners to enhance programming, • Manage program supplies, materials, and equipment, • Provide comprehensive administrative assistance to the Executive Director, • Manage Executive Director's calendar, schedule meetings, and coordinate appointments, • Handle correspondence including emails, phone calls, and written communications, • Prepare meeting materials, agendas, and take minutes as needed, • Serve as receptionist for incoming phone calls and in-person visitors, • Maintain organized filing systems and handle confidential information with discretion, • Draft and proofread correspondence, reports, and other documents, • Support board meeting preparation and organizational communications, • Order office supplies and maintain inventory, • Full-time position: 40 hours per week, • After-school program hours: 3:00 PM - 6:00 PM, • STEAM Program schedule: 2:00 PM - 6:00 PM (includes one hour for program planning and preparation), • Administrative hours: Flexible scheduling during weekday business hours, • Located at King Urban Life Center, 938 Genesee Street, Buffalo, New York, • Dual work environment: educational programming spaces and professional office setting, • Experience working with school-age children in educational settings, • Knowledge of STEAM education principles and hands-on learning approaches, • Experience working with urban youth and families from minority backgrounds, • Previous administrative or office support experience, • Excellent written and verbal communication skills, • Strong organizational skills and ability to manage multiple priorities, • Strong classroom management and behavior guidance skills, • Proficiency with Microsoft Office 365 (Word, Excel, Outlook, PowerPoint), • Cultural competency and commitment to equity in education, • Professional demeanor and customer service orientation, • Ability to work independently and transition smoothly between different roles, • Bachelor's degree in Education, Child Development, Business Administration, or related field, • Teaching certification or relevant educational credentials, • Experience with after-school programming or youth development programs, • Experience supporting executive-level leadership or nonprofit organizations, • Bilingual skills (especially Spanish or other languages spoken by families in our service area), • Knowledge of trauma-informed practices and positive youth development, • Experience with project-based learning and hands-on STEAM activities, • Background working in urban educational settings, • Familiarity with database management and nonprofit operations, • Competitive hourly wage of $19.00-$22.00 based on experience ($39,520-$45,760 annually), • Stable, full-time position with diverse responsibilities, • Comprehensive paid time off for all federal holidays, • 5 paid sick days per year, • 5 paid vacation days per year, • 50% employer-paid silver health insurance plan (single coverage), • Employee assistance program, • Meaningful work making a direct impact on children and families, • Professional development opportunities in STEAM education and nonprofit administration, • Unique opportunity to contribute to multiple aspects of organizational success Interested candidates should submit to a resume and cover letter explaining their interest in this dual-role position and describing relevant experience in both education and administration. References from previous supervisors in education, youth services, or administrative roles are preferred. We are an equal opportunity employer committed to diversity and inclusion in our workforce. ABOUT KING URBAN LIFE CENTER King Urban Life Center strives to be a resource hub for the East Side of Buffalo by uniting the community and connecting children and families to free and impactful programming. The King Urban Life Center is committed to preserving the historic building it occupies, fostering radical neighborhood transformation, and delivering innovative educational programs to members of all ages, with a focus on young children and families. Located at 938 Genesee Street Buffalo, New York, the center operates as a national historic landmark that provides educational and social services to strengthen families and build community connections. Job Type: Full-time (40 hours per week) Work Location: In person Company DescriptionFind out more about our organization at out more about our organization at

Job DescriptionJob Title: Enterprise Architect - Consumer BankingLocation: Buffalo, NYHire Type: ContingentPay Range: $48.37 - $80.62/hourWork Type: Full-timeWork Model: RemoteWork Schedule: Monday – Friday, 9am – 5pm Recruiter Contact: Brian Fesmire, & Scope:Positional OverviewThe Imagine Group is recruiting for an Enterprise Architect - Consumer Banking, on behalf of our client, a leading financial institution recognized for its strong community presence, customer-focused approach, and commitment to helping individuals and businesses succeed. in Buffalo, NY. In this role, you will play a pivotal role in shaping the organization’s technology strategy, landscape, and roadmap. You will serve as an integrative force across business and technology domains, establish trusted advisor partnerships with senior leaders, and drive the architecture of complex, high-priority initiatives that deliver significant business value. Your work will influence large-scale programs that are critical to the bank’s long-term success, ensuring scalable, resilient, and forward-looking solutions.Role & Responsibility:Tasks That Will Lead to Your Success • Strategic Planning: Define and evolve enterprise architecture strategies and roadmaps that align business priorities, regulatory requirements, and long-term technology vision., • High-Level Design: Develop high-level architectural models and frameworks that support secure, scalable, and resilient solutions across the bank, aligned with the strategic direction established by Enterprise Architecture function., • Detailed Solutions Architecture: Translate strategic objectives into actionable solution architectures that provide clear direction to delivery and engineering teams., • Regulatory & Risk Alignment: Ensure architectural solutions comply with financial industry regulations, internal risk frameworks, and data privacy standards, supporting auditability and operational integrity., • Cross-Functional Collaboration: Partner with business leaders, product owners, and technology teams to ensure architectural alignment across client services, digital platforms, and core banking systems., • Implementation Leadership: Provide architectural oversight and governance throughout the solution delivery lifecycle, ensuring adherence to enterprise standards and successful on-time execution of high-impact initiatives., • Trusted Advisor: Build strong relationships with management, providing expert advice and insights to support decision-making., • Communication: Communicate complex architectural concepts clearly and persuasively to both technical and non-technical audiences, fostering alignment and informed decision-making., • Vendor & Partner Engagement: Collaborate with external technology providers and service partners to ensure solutions meet enterprise standards for performance, cost-effectiveness, and agility in a highly regulated environment.Skills & ExperienceQualifications That Will Help You Thrive, • Bachelor of Science in Computer Science, IT, Engineering, or related field, • 7+ years in cloud architecture, with 3+ years focused on Retail/Consumer related technology within a financial institution., • Knowledge of institutional banking products and services including capital markets, investment management, structured finance, and M&A, • Experience in driving and delivering innovation within the realm of financial services, • Working knowledge of architecture diagramming practices, architectural frameworks, and/or enterprise architecture tools, • Work experience in software engineering, software delivery and/or solution architecture including developing and integrating applications using relevant software architecture principles and patterns

Job DescriptionPharmacy Support Associate Job Description The ideal candidate will be able to fill prescription requests accurately and efficiently in an automated refill setting. Under the supervision of a Pharmacist, the Pharmacy Support Associate prepares, packages, sorts, and distributes medications in a fast-paced production environment. The candidate will maintain continuous, consistent workflow to meet daily production goals and has the ability to work productively independently or in a team environment. Responsibilities • Manually fill prescription vials with prescribed tablets and capsules., • Retrieve and process Unit of Use and Bulk items., • Read computer-generated screens to find indicated medication on labeled shelves, verifying size and strength of the product before filling the order., • Replenish medication in automated cells to full capacity, opening large quantities of bottles and cases of products., • Use basic mathematical reasoning to either count or calculate the appropriate number of units needed to fill prescriptions., • Utilize handheld scanner units to scan barcodes of products for replenishment., • Demonstrate problem resolution skills, including the ability to recognize, address, and escalate issues., • Maintain focus and acute attention to detail while performing repetitive tasks with absolute accuracy., • Maintain the pharmacy floor in a clean and orderly condition., • Understand and abide by federal and state HIPAA laws as well as pharmacy standard procedures to ensure patient safety and privacy., • Process orders for shipping, including folding/packing paperwork and attaching shipping labels., • Fill, pack, and ship prescriptions with 100% accuracy and efficiency using Standard Operating Procedures (SOP) and supported hardware and software., • Adhere to and promote the Company's Shared ICARE Principles., • Experience in pharmacy operations and professional standards., • Proficiency in filling prescriptions and medication handling., • Knowledge of automated refill systems, order entry, and pharmacy support., • Strong data entry skills., • Ability to provide excellent customer service and support to pharmacy technicians and students., • HS diploma/GED or equivalent experience required., • Ability to lift up to 30 lbs and carry 20-30 lbs of merchandise., • Standing/walking continuously during the shift (8 hours per day)., • Requires bending, twisting, reaching, grasping, and pinching., • Visual acuity to read computer screens, handheld scanners, and labels., • Good computer skills., • Warehouse experience is a plus., • Strong interpersonal skills in a constantly changing production environment., • A Pharmacy Tech degree is not required in NYS., • Excellent attention to detail and quality-focused. The work environment is climate-controlled, ensuring comfort during shifts. The position requires part-time work, ranging from 24 to 36 hours a week. Fridays and Sundays are mandatory workdays. The schedule is as follows: Sunday (9:00 am - 5:30 pm), Monday (9:00 am - 2:00 pm), Tuesday (9:00 am - 2:00 pm), Thursday (9:00 am - 2:00 pm), and Friday (9:00 am - 5:30 pm) Pay : 17$/ hour Job Type & Location This is a Contract position based out of Buffalo, New York. Job Type & Location This is a Contract position based out of Buffalo, NY. Pay and Benefits The pay range for this position is $17.50 - $17.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Buffalo,NY. Application Deadline This position is anticipated to close on Dec 22, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description We are currently seeking a Regulated & Hazardous Building Materials Professional with a preferred 1-3 years of experience to support our growing program. This position requires an intermediate level of technical working knowledge of New York State Code Rule 56, as well as other federal, state and local regulations pertaining to hazardous and regulated building materials. The ideal candidate will have interest, experience with building inspections, lead testing, as well as abatement project monitoring. LaBella offers excellent training and career advancement opportunities. A successful candidate would be self- motivated with the willingness to learn, train, and build their knowledge through classroom and project experience. As this role requires working on various active construction sites, the candidate should enjoy time in the field and be able to work independently and responsibly. LaBella offers excellent training and career advancement opportunities. Duties • Perform periodic on-site observations of environmental remediation projects under abatement/construction and monitor the quality of work performed by engineers, consultants, contractors, and sub-contractors., • Perform related functions including hazard assessments, surveys, submittal reviews, abatement plan and specification review, asbestos and lead sampling, and survey report review., • Consult with other staff members on environmental questions arising from the review of plans, drawings and construction project problems and issues., • Prepare reports relating to assigned activities. Workstation varies depending on assignment. May require entry into containment areas. Use of appropriate personal protective equipment required at field sites, (i.e., respirators, disposable suits, boots, gloves, hard hats, and eye protection). Frequent travel may be required using rental vehicle, company vehicle, or personal vehicle. This travel may include overnight stays at public accommodations and related establishments. Job duties may require exposure to weather and temperature extremes, loud noises, heights (climbing ladders, scaffolding, etc.) and other work-safety hazards (chemicals, fumes, etc.) at a construction site. Must be able to pass annual physical examination to confirm ability to wear a respirator. Must be available to occasionally work a modified work schedule or extended workday hours, as necessary. Preferred Qualifications: • Associates or BS in a Science, Engineering or Construction related field., • 1-3 years of experience is preferred., • Current NYSDOL Asbestos Inspector certifications preferred, • Current NYSDOL Project Monitor/Air Technician certification preferred, • Current USEPA Lead Inspector certification preferred, • High interest in learning other environmental job duties. LaBella will provide required training. Salary Range: $20.00 - $24.00 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. o Flexible Work Schedule o Health/Dental Insurance o 401k Plan with Employer Match o Short & Long Term Disability o Profit Sharing o Paid Time Off o Leadership Development Program o Fitness Reimbursement o Tuition Reimbursement o Referral Bonus Program o Wellness Program o Team Building Events o Community Service Events

Job Description We are currently hiring a Structural Engineer to join our Building Engineering Division in our Buffalo, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Structural Discipline provides structural engineering services with emphasis on new design, repair, and rehabilitation of constructed works, as well as investigation and performance evaluation. This position will work closely under the supervision of a Senior Structural Engineer to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams Candidates will work on an interesting variety of project types including K-12 and higher education, municipal, health care, large commercial, residential and other unique projects. This role can accelerate your career goals through immediate opportunities to lead, and comes with a competitive starting salary, incentive compensation, a comprehensive benefit package, and opportunities to become a LaBella shareholder. Duties • Perform complex design calculations for analysis and design of new and existing structural systems., • Prepare documents and reports from concept design through advanced technical design documentation., • Perform field investigations and document findings., • Work closely with other engineering and architectural disciplines., • Review shop drawings, respond to RFI’s and perform field observations during CA phase. Salary Range: $65,000 - $100,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor of Science degree in Civil or Structural Engineering is required. Coursework in building systems engineering required., • Master of Science degree in Structural Engineering is preferred., • 3 years minimum experience with concrete, steel, masonry, and/or wood design is required., • Working knowledge of AutoCAD, Revit and structural engineering design software (RISA, SAP, and/or TSD) is required., • E.I.T. accreditation preferred., • Excellent verbal and written communication skills. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description * • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption and modifications of standard techniques and procedures., • Works with the Principal, Associate or Project Manager to finalize Project Scope and Schedule of deliverables and understands priorities identified., • In addition to duties of project engineer/project designer, applies advanced practices and techniques, adjusts and correlates data, recognizes discrepancies and follows projects through program, schematic, design development, construction document, bidding and construction phases., • Supervises, coordinates and reviews work, schedules and assigns work to meet completion dates., • Develops reports, studies, and system analysis., • Works in an efficient an effective manner and makes good decisions., • Evaluates application of substitute equipment., • Reviews final adjustment of equipment and systems after installation., • Writes or contacts client directly except in controversial matters., • Ability to represent the firm at meetings and cover all trades, which may require further follow through., • Is assisted on projects by other engineers and/or designers., • Estimates workforce needs and schedules and assigns work to meet completion date and updates the project manager as to status and resources available., • Mentors and trains younger engineers and designers., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science or equivalent. Powered by JazzHR bMPaHCoEAt

Job Description Must Have Skills 10+ years of relevant technical experience designing and delivering enterprise class integrations, cloud services, or OTIoT solutions. Strong systems design and software engineering background (distributed systems, APIs, microservices, containers, orchestration). Handson experience integrating CMMS, BASOT, ERPProcurement systems, or enterprise SaaS platforms. Nice to have skills Strong collaborator and mentor who elevates engineering practices across teams Datadriven and securityfirst mindset excellent at articulating tradeoffs. Detailed Job Description Summary · The Solution Architect / Technical Lead provides end-to-end technical leadership for real estate product portfolios and integration initiatives. This role designs scalable, secure architectures and drives implementation of systems that support the portfolio of products and capabilities including space & occupancy, CMMS, BAS/OT, parts/inventory, project management, BIM/drawings, data warehousing, and analytics. The person partners with Product Management, UX, Engineering, Data, Security, and vendors to ensure high-quality delivery, operational reliability, and long-term maintainability of solutions. Core Responsibilities · Architecture & Technical Strategy o Define solution architectures that meet functional needs, non-functional requirements (scalability, availability, security, performance), and enterprise standards. o Produce architecture artifacts: integration diagrams, API contracts, data models, sequence flows, deployment topologies, and solution decision records. · Integration Design & Delivery o Lead design and delivery of cross-system integrations including data mapping, reconciliation strategies, error handling. o Recommend synchronous vs asynchronous patterns, middleware or event streaming, and API gateway/SOA patterns as appropriate. · Implementation Leadership o Act as technical owner in all phases including Discover, Prepare, Explore, Realize, Deploy and Run, define CI/CD pipelines, guide code reviews, and set engineering practices (automated testing, observability). o Mentor developers, Functional Analysts, DevOps, and junior architects on design patterns, test automation, and secure coding. · Data & Modeling o Collaborate with data engineers to define canonical data models for assets, locations, leases, work orders, parts, and drawings. o Define ETL/ELT approaches, data quality rules, master data management strategy, and data lineage for the data warehouse. · OT / BAS / Edge & IoT o Design secure, vendor-neutral approaches for connecting BAS/OT systems and edge devices, including protocol translation, telemetry ingestion, and edge processing patterns. o Identify strategies for device lifecycle management, firmware/patching workflows, and OT/IT network segmentation compliant with security policy. · Security, Compliance & Governance o Ensure solutions comply with security, identity, data residency, and regulatory requirements. Specify encryption, IAM, SSO, and audit/logging controls. o Work with Security/Compliance and enterprise architects to conduct threat modeling and security reviews. · Vendor & Supplier Technical Oversight o Evaluate vendor architecture, lead technical onboarding, and validate vendor deliverables against architecture and integration contracts. o Define SLAs, runbooks, and operational acceptance criteria for vendor-hosted SaaS tools. · Operational Excellence o Design for observability (metrics, logging, distributed traces), incident response playbooks, recovery objectives (RTO/RPO), and automated health checks. o Drive runbook and automation creation so GREF operations teams can manage and support systems with predictable SLAs. Key Deliverables · Solution architecture documents and integration blueprints · API contracts, data models, and mapping specifications · Security and compliance artifacts, threat models, and remediation plans · Operational runbooks, alerting thresholds, and SLOs · Migration and cutover plans for legacy → modern platforms Required Qualifications · 10+ years of relevant technical experience designing and delivering enterprise-class integrations, cloud services, or OT/IoT solutions. · Strong systems design and software engineering background (distributed systems, APIs, microservices, containers, orchestration). · Hands-on experience integrating CMMS, BAS/OT, ERP/Procurement systems, or enterprise SaaS platforms. · Experience defining canonical data models, working with ETL/ELT pipelines, data warehouses, and BI integrations. · Familiarity with security best practices: SSO, encryption, network segmentation, threat modeling. · Excellent communication skills and demonstrated ability to work in matrixed, cross-functional teams and to present technical trade-offs to non-technical stakeholders. · Bachelor’s degree in computer science, Engineering, or equivalent technical discipline. · Relevant certifications: TOGAF, AWS/Azure architect, CISSP, or other security/architecture credentials. Behaviors & Competencies · Technical leadership with a bias for delivery and pragmatic engineering decisions. · Strong collaborator and mentor who elevates engineering practices across teams. · Customer focus—understands operational user needs and translates them into robust technical solutions. · Strategic thinker who balances near-term delivery with long-term architectural health. · Data-driven and security-first mindset; excellent at articulating trade-offs. Company DescriptionHire IT People, Inc provides full time and contractual IT staffing nationwide. We presently provide services to several governments and state agencies, Fortune 500 companies, and leading mid-market companies in several including healthcare, insurance, retail, state/governments. We serve Government agencies, Fortune 500 and leading mid-market companies across every Industry Our candidate network includes thousands in our database and targeted networks including top social sites We gather information about your future hiring needs to perform a pro-active search, we mostly work with local candidates Our cutting-edge recruitment tools help minimize the complexities of hiring and reaching the right talent We can provide experienced IT Professionals for your IT Projects covering most Technologies and rolesHire IT People, Inc provides full time and contractual IT staffing nationwide. We presently provide services to several governments and state agencies, Fortune 500 companies, and leading mid-market companies in several including healthcare, insurance, retail, state/governments.\r\n\r\nWe serve Government agencies, Fortune 500 and leading mid-market companies across every Industry\r\nOur candidate network includes thousands in our database and targeted networks including top social sites\r\nWe gather information about your future hiring needs to perform a pro-active search, we mostly work with local candidates\r\n\r\nOur cutting-edge recruitment tools help minimize the complexities of hiring and reaching the right talent\r\nWe can provide experienced IT Professionals for your IT Projects covering most Technologies and roles

Job Description Objective: Provide leadership and engineering support to manufacturing operations. Design tools; develop and validate processes; develop and manage product and process cost; provide technical support to sales and the outside customer; identify and manage the introduction of new technology; maintain, troubleshoot and improve existing processes; support safety, quality, delivery and cost of the entire operation. Manage the more complex technical projects from inception through completion. Mentor less experienced engineers. Minimum Requirements: • 10+ years of experience in a related technical position in a design or manufacturing environment, • Bachelor of Science in Mechanical Engineering, Industrial Engineering, or other related field, • Solid modeling experience using Solid Works, Pro E, Inventor, or equivalent, • Demonstrated experience managing all phases of more complex technical projects, • Demonstrated safety, quality, delivery and cost experience supporting manufacturing operations Job Requirements: • Strong math, reasoning and problem solving skills, • Hands on experience with solid modeling for tool and fixture design, • Working knowledge of Geometric Dimensioning and Tolerancing (GD&T), • Experience with MS Word, Excel, Outlook, PowerPoint, • Maintaining a presence at both the Buffalo, NY and Erie, PA sites, as required, by the work they are assigned, • Product cost development in support of the quoting process, • Routing development and maintenance in MRP, • Development of detailed work instructions, • Product cost development and maintenance through time studies (labor), BOM content (material) and overhead rates, • Continuous improvement of products and processes, • Cost reduction of products and processes, • Statistical analysis - Minitab experience preferred, • Lead and manage prototype builds, • Equipment/ technology design in support of operations, • Experience working within and adhering to a Quality Management System such as IATF16949 and ISO 9001, • The ability to work with people at all levels of the organization and across all functions, • Knowledge of manufacturing processes such as; tube forming, brazing, welding; milling, and turning, • Strong organizational and communication skills to include customer engagement, sales support and presentations, • Implementation of Lean Manufacturing Principles, • Management of all aspects of technical projects from inception to production qualification, • Procurement of new capital equipment to include Return on Investment (ROI) analysis, • Execution of work assignments with minimal follow-up supervision, • Mentoring of less experienced engineers Essential Duties and Responsibilities: • Execute Engineering assignments to support new product introductions and steady state manufacturing, • Provide daily technical support to operations to include problem solving, • Manage the product life cycle (design through production qualification) for all fixtures and tools, • Manage all design changes into production, • Manage/ lead the ECN process, • Technical support to quality, • Develop and manage equipment validations, • Develop training for operators for new and existing equipment, • Develop manufacturing processes that are safe, provide superior product quality, and are cost effective, • Identify and execute on cost reduction opportunities, • Identify and execute on manufacturing process improvement opportunities related to safety, quality, delivery and cost • Lead and manage prototype builds, • Technical support to sales during customer engagement for new products, quality issues, etc., • Prepare capital expenditure proposals, • Become the subject matter expert for all production equipment and technologies, • Understand and implement Lean Manufacturing principles, • Develop and maintain the plant layout to ensure operations safety, quality, delivery and cost optimization, • Develop and maintain design standards and best practices, • Technical support to sales during customer engagements to include presentations, sales calls/ visits, etc. Pay Range: $90,000-115,000. The referenced pay range represents the minimum and maximum compensation for this job. Individual annual salaries/hourly rates will be set within the job’s compensation range, and will be determined by considering factors including, but not limited to, market data, education, experience, qualifications, expertise of the individual, and internal equity considerations. Physical Requirements: While performing the duties of this job, the employee is regularly required to sit for extended periods, use hands to operate a computer and other office equipment, and communicate effectively via phone and email. The employee may occasionally be required to stand, walk, reach with hands and arms, and lift or move items weighing up to 10 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Job Description At Danforth, we are committed to fostering education and growth by offering an immersive learning experience for students eager to explore the dynamic world of mechanical contracting. This internship provides a unique opportunity to rotate through key departments, gaining hands-on exposure to the diverse facets of our business. Kick-Start Your Career • Are you ready to embark on an exciting journey in the mechanical contracting industry? Our Engineering and Sales Rotation Internship program offers:, • Practical Experience: Rotate through critical areas, including Design-Build Sales, Estimating, and Energy Engineering., • Real-World Collaboration: Work alongside seasoned professionals on impactful projects., • Skill Development: Build expertise in client relations, project management, and business strategy. Explore Every Angle In addition to sales, you’ll gain exposure to technical and operational roles, providing a well-rounded understanding of the industry: • Sales: Shadow sales executives, learn project pricing and proposal development, and build relationships with vendors and subcontractors., • Estimating: Discover how cost projections influence project success and learn key estimation techniques., • Design & Energy Engineering: Dive into innovation, exploring system design and energy efficiency strategies., • Virtual Design Construction (VDC)/Computer Aided Design (CAD): Work with cutting-edge technologies to visualize and optimize project execution. Program Highlights • Rotate through all departments within our Engineering & Sales teams., • Attend educational workshops and training sessions, and gain exposure to active job sites., • Shadow sales representatives on client visits and participate in on-site walk-throughs., • Gain insights into the estimating process and its critical role across business segments., • Learn about strategic partnerships and their influence on business growth. Experience & Competencies • Willingness and ability to learn., • Strong organizational skills., • Integrity, punctuality, and enthusiasm to represent Danforth to our customers., • Excellent communication and collaboration skills. This internship is designed to empower you with the knowledge, skills, and confidence to thrive in the mechanical contracting field. By working on meaningful projects and gaining hands-on experience, you’ll build a solid foundation for your future career. If you’re ready to take the first step toward a rewarding career, we’d love to welcome you to our team! John W. Danforth Company is an equal opportunity employer and is committed to a workplace free from discrimination. All employees and applicants for employment will be considered without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description • We have an opening for full time JANITOR positions., • Location: 1339 South Park Avenue, Buffalo, NY 14220 Note: online applications accepted only., • Schedule: Full time schedule. Days and hours may vary. More details upon interview., • Requirement: No experience is necessary. Willing to train!, • Pay Rate: $18.50 per hour. ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1447990. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM’s clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Keeps buildings clean and orderly. Performs heavy cleaning duties, including cleaning floors, shampooing rugs, washing walls and glass, and removing rubbish. Essential Duties and Responsibilities: • Collects and disposes of trash following approved procedures and infection control plans., • Dusts and damp mops floors following approved procedures., • Moves equipment and furniture for proper cleaning and place furniture back in correct placement., • Cleans assigned areas with the use of assigned materials and equipment. Sanitize all surfaces. Follows the eight-step cleaning procedure., • Washes walls, windows, furniture, baseboards and other items to maintain a clean, safe environment for patients, visitors and staff., • Seeks out areas requiring cleaning; takes initiative to complete the task., • Completes all tasks assigned by supervisor., • Performs tasks in accordance with all federal, state and county guidelines., • Strips, scrubs, buffs and refinishes floors; shampoos carpet., • Contributes to the team; exhibits professionalism with customers, fellow employees and others. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job Description Summary: Seeking an individual to join our Automation Engineering team. This group focuses on supporting our manufacturing plant with the latest in automated manufacturing equipment. We are looking for candidates that have a passion for solving problems and that enjoys hands on work. Qualifications: • Pursing Bachelor of Science in Electrical Engineering or related field, • Ability to develop creative solutions to difficult problems, • Mechanically inclined with strong attention to detail, • MS Office experience (Word, Excel, Outlook, PowerPoint) Responsibilities: • Creation of electrical schematics and panel layout drawings for industrial manufacturing equipment, • Wiring of electrical panels, • Selection of components such as actuators, control system hardware and sensors, • Programable Logic Controller (PLC) programming and troubleshooting, • Industrial and Co-bot Robotic programming and teaching, • Test running and troubleshooting of automated machinery, • Sensor testing and evaluation, • Light mechanical design work and solid modeling, • Assembly of systems using hand tools, • Light fabrication using power tools such as drills, grinders, saws WORKING CONDITIONS In Addition To Being Able To Sit, Stand, Climb, Walk, Read, Talk, See And Hear, To Perform The Essential Functions Of This Job An Individual Must Be Able To Do The Following Additional Activities • Perform office work requiring sitting at the computer and other administration duties., • Walking on flat or uneven surfaces., • Bending, stooping, and working from just above the ground to 6-foot elevation., • Use of stairs and ladders for elevated work., • Lifting 5 to 15 lbs. loads is performed daily., • Lifting 15 to 45 lbs. loads is done on an intermittent basis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law.

Job DescriptionSalary: $20/hr DOE Position Summary: Performs various microbiological sampling and testing in an FDA regulated environment, including personnel and environmental monitoring. Essential Functions: • Perform and review environmental monitoring of ISO5/ISO7/ISO8 manufacturing areas (viable air, viable surface, personnel, and non-viable particulate) as well as inspection for compliance., • Perform and support Media Fill Validations, Engineering Validations and Cleaning Validations., • Accurate/legible completion of records and documents for tests performed, and accurate computer data entry/trending/presentation., • Raw Material/Prefiltration Bioburden/Water sample/Filter integrity testing., • Media check in and growth promotion., • Equipment preparation and autoclaving., • Preparation of microbial ID samples., • Off testing of incubated environmental monitoring media, testing samples, and Media Fills., • Use standard laboratory equipment including but not limited to balance, incubator, autoclave, pipettes, and water bath., • In-process/finished product sample inspection and submission to in-house/third party laboratories., • Stocking/ordering lab supplies., • Assist with revision of microbiology/laboratory procedures and documentation., • Maintenance of close communication and interaction with QC/QA/Production management., • Utilization of programs for daily workflow (e.g. LIMs)., • Utilization of a Quality Management System (QMS) for training and document review/ improvements., • Potential involvement in procedural/policy improvements within the department., • Support microbiology laboratory investigations including NONC/EE/Issue reviews/OOS/OOT/No Tests/CAPA., • Responsible for promoting and maintaining safe and healthy working conditions in his/her assigned work area; instructs and enforces compliance with established safe work practices and procedures; ensures assigned trainees receive appropriate training and information necessary to conduct their activities in a safe and healthy manner., • Responsible for cleaning and upkeep of the laboratory and testing areas., • Support gown assessments as needed., • May perform other duties as qualified/assigned, including but not limited to Sterility , Endotoxin , MET testing, NONC issuance., • Any additional activities as dictated by updates to Standard Operating Procedure and Policies to ensure compliance with cGMP and regulatory bodies. Education and Experience: • A bachelors degree (science related field preferred) or associates degree is preferred., • In lieu of a degree, a high school diploma or equivalent and a minimum of 2 year experience in a regulated environment or Pharmaceuticals may be considered. Knowledge, Skills and Abilities: • Must successfully complete training on aseptic gowning procedures and demonstrate the ability to aseptically gown upon completion., • Accurate/legible completion of records and documents for tests performed, and accurate computer data entry., • Good time management skills, attention to detail, ability to adhere to implemented standard operating procedures/policies, ability to communicate professionally with contract laboratories regarding sample testing, communication with others, and flexibility for new opportunities/tasks., • Works well independently and in a team orientated environment., • Experience in microbiological principles and applications related to microbial ID, validation, or clean room technology., • Experience with standard laboratory equipment including balance, incubator, autoclave, pipettes, or water bath is preferred., • Knowledge of ISO, USP or GMPs standards is a plus., • Knowledge of computer skills (e.g. Windows, Word, Excel, Power Point) Physical Requirements / Working Conditions: • Must have a reliable method of transportation for work travel., • Ability to wear high level full body aseptic gowning with face mask for long periods of time is required., • Ability to stand for long periods of time.

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is currently interviewing for a Plumbing/Fire Protection Project Engineer in our Buffalo, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate, and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimating., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR 4ZnuY5QJf4

Job Description Job Title: Senior Product Manager, Job Title: Senior Product Manager, Global Product Management Reports To: VP, Global Product Marketing, ZeptoMetrix Position Location: Buffalo, NY Franklin, MA highly preferred FLSA Status (Exempt/Non-Exempt): Exempt FLSA Status (Exempt/Non-Exempt Position Summary: The Senior Manager, Global Product Management for Molecular Diagnostics is accountable for creating and delivering the new product pipeline for infectious disease and genetic testing. The role is responsible for managing the assigned product portfolio, delivering growth, profitability and share gain for the assigned portfolio, effectively ensuring a strong and competitive portfolio of products that outperforms competition and exceeds customer expectations. This role will leverage market and customer insights into enhancing and developing new and innovative products within the portfolio, as well as partnering with internal teams to ensure final product exceeds customer expectations. The Senior Product Manager will be responsible for driving growth by developing and implementing strategies to further expand the Clinical Lab market for both existing and new products. Key Responsibilities: • P&L responsibility for maximizing global revenues, margins, and growth of assigned products by creating strong and innovative strategic plans for growth within the market., • Drive revenue growth through overall product life cycle management including, but not limited to product line strategy and vision, product line road mapping, product line development in collaboration with Research & Development, Operations, Regulatory Affairs and Commercial teams. Implement appropriate programs to either internally develop, contract manufacture, license or source the appropriate products with the goal of driving revenue & profitability growth of the category portfolio., • Drive product area efforts and coordinate with Corporate Development (M&A) and R&D/engineering to ensure the product roadmap achieves market-positioning, timeline and revenue targets as planned. Look for opportunities to anticipate and respond to market and customer needs by optimizing product portfolio across all possible markets, both existing and new., • Develop strategies with Sales and Marketing to drive market share growth., • Develop and implement appropriate and effective global pricing strategies with Pricing team to maximize profitability and margin., • Partner with Supply Chain to support supplier consolidation and cost reduction initiatives., • Execute competitive assessments and voice of customer/market research to gain market insights for competitive, differentiated product strategies. Demonstrate strong global market understanding and stay current on market direction and drivers through a variety of means including, but not limited to, direct interactions with customers, outside suppliers, partners, and industry contacts., • Gather and prepare all necessary product and technical information and content for the introduction of new products and ongoing product documentation, applications, and testimonials for all products to enable an exceptional customer experience, drive brand awareness and ensure customer loyalty., • Partner closely with the commercial and customer service teams to develop and drive sales enablement strategies, programs and resources to support both the internal MolDx sales team and global distribution channels., • Scientific marketing for the assigned portfolio and markets, including the creation of a Global Speakers Bureau and the development and execution of a Global Publication Plan to produce scientific posters, papers, webinars, and articles in collaboration with commercial and science teams., • Collaborate with global demand generation and customer experience teams to develop and execute strategies aimed at achieving revenue targets for the U.S. clinical lab market., • Performs other duties as assigned Education: • Must possess a Bachelor’s Degree - B.A / B.S. with major/minor in sciences/business required – business, marketing, science, chemistry or engineering; MBA / Master’s Degree / Graduate degree a plus Experience: • Must have at least 10 years of progressive experience in product management / product development, marketing or program/project management within R&D (technical) or Marketing (business/administrative) domains; familiarity with products used in regulated environments, cold storage, or cold chain environments preferred., • Knowledge of molecular diagnostics, infectious disease and genetic testing, laboratory products/applications, actual working laboratory or process / industrial experience or understanding of customer requirements in laboratory or process / industrial products considered / strongly preferred Minimum Requirements/Qualifications: • Potential candidates should have relevant experience in the following areas:, • Proven track record of commercial/program success within a product area, • Prior commercial experience in a product management, sales, or marketing function, • A technical background in life sciences (biology, biochemistry, chemistry) that includes an awareness of technology trends and the evolution diagnostics, especially molecular diagnostics, applications, • Industry-related experience in healthcare or laboratory-based life science markets preferably in diagnostics & molecular control markets., • Understanding of FDA and international regulated markets and how such regulations impact product design, labeling, manufacture, and testing., • A high level of initiative, creativity, and work with little supervision. Ability to build strong executive and peer relationships., • Ability to travel up to 25%, including some international., • Willing to take calculated risks and to learn from mistakes., • Demonstrated ability to successfully balance the achievement of short-term objectives with longer-term strategic goals., • Must possess strong negotiation skills to independently negotiate and manage a relationship with external suppliers/management level personnel, representing company’s interests., • Proficient in standard computer applications, with excellent skills in Excel, Word and PowerPoint. Must be able to obtain, manipulate and analyze data and effectively collate and present information into reports or presentations., • Thrives in a fast-paced, collaborative environment, efficiently works under pressure, within deadlines or other time essential constraints, • Excellent communication skills, both written and verbal, to clearly and concisely communicate to all levels of the organization, • Salary Range: $125k-$135k, depending on location, experience, and qualifications. Plus bonus., • Benefits coverage begins day 1, including the following:, • Medical, Dental, Vision Insurance, • Disability Insurance, • Life Insurance, • 401(k) company match, • Paid Time Off (15 days annually), • Paid Holiday time (10 company-designated days), • Tuition Assistance, • Additional benefits available with company package This position has not been approved for Relocation Assistance. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this job. They are not an exhaustive list of all of the duties and responsibilities associated with it. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is currently interviewing for an Electrical Project Engineer in our Buffalo, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager, or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimations., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR x3cXkMjetg

Job DescriptionJob Title: Senior Operational Business Systems Analyst, ERPLocation: Detroit, MIHire Type: Direct HirePay Range: $110,000 - $125,000Work Type: Full-timeWork Model: HybridWork Schedule: Monday – Friday, 9am – 5pm Recruiter Contact: Samantha Marranca, & Scope:Positional OverviewThe Imagine Group is recruiting for a Senior Operational Business Systems Analyst, ERP on behalf of our client, a leading global manufacturer of precision fasteners and fastening solutions for the electronics, automotive and industrial industries.In this role, you will be responsible for playing a pivotal role in supporting and optimizing our Enterprise Resource Planning platform, to meet the evolving needs of the business. This role involves working closely with stakeholders to gather requirements, create specifications, and implement changes that enhance business processes and drive efficiency, with a focus on manufacturing and distribution. The ideal candidate will have extensive experience with JD Edwards, strong relationship-building and listening skills, an ability to work independently and with a team, a deep understanding of strategic business directives, and a high attention to detail to ensure quality of delivery. As part of our team, you will enjoy a comprehensive benefits package, including: • Medical & Employer Paid: Dental and Vision, • Parental Leave, • 401k and Employer Match, • Paid time off and holidays, • Tuition reimbursement, • Paid On the Job Training, • Performance incentive bonuses, • Community Volunteering, • Talent Referral Bonus Program, • Employee Centric Culture, • Company Provided Technology (laptop, phone, monitors for office and home environment), • Compensation: $100,000 or more. Pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills and experience. The total compensation package for this position may also include other elements depending on the position offered. Details of participation in incentive plans will be provided if an employee receives an offer of employment, • Residency in one of the organizations’ domestic locations: Buffalo, NY; Danboro, PA; Detroit, MI, or Winston, NC.Role & Responsibility:Tasks That Will Lead to Your Success, • Collaborate with business stakeholders to understand, influence, document, and prioritize business needs, including test cases, exceptions, and acceptance criteria for enhancements and new features. Communicate detailed requirements to development teams for implementation. Create process maps when necessary to help stakeholders and developers visualize as-is and to-be processes., • Develop a strong understanding of existing operational processes, including manufacturing and distribution, inventory management, quality controls, production planning, supply chain, and day-to-day operational activities., • Drive system utilization to enable improved decision-making, create business process efficiencies, and deliver sustainable and measurable business value through key performance indicators (KPIs) and regular business reviews., • Understand JD Edwards platform capabilities and collaborate with the ERP development team to propose solutions that align with business objectives and improve operational efficiency., • Provide training and support to end-users, ensuring they are proficient in using JD Edwards tools and features. Drive adoption activities. Communicate system improvements, automations, and features as released., • Lead and manage JD Edwards projects, ensuring adherence to budget, project timelines, and quality standards. Serve as the primary project communicator, ensuring weekly progress updates during projects and tracking key milestones with champions and stakeholders., • Identify opportunities for process improvements and implement best practices to enhance system performance., • Maintain comprehensive documentation of business processes within the system and user guides., • Stay up to date on new releases by JD Edwards and identify opportunities to apply new features where appropriate. Network with other JD Edwards users and similar companies to identify and implement best practices., • Ensure that JD Edwards implementations comply with relevant regulatory certifications where applicable. Ensure standard IS practices are met including service request tracking, change management, and outage tracking., • Contribute as a global team member of the Operational Systems team, acting as a subject matter expert for manufacturing/distribution processes and applications. Serve as the liaison between Global Information Systems (GIS), Operations, Application Engineering, Supply Chain, and customers., • Build system capabilities to drive business value focused on key operational pillars: Enable External Growth, Drive Customer Satisfaction and Loyalty, and Improve Team Efficiency.Skills & ExperienceQualifications That Will Help You Thrive, • Bachelor’s degree in Computer Science, Information Systems, Business Administration, or a related field; equivalent work experience will also be considered., • 5+ years of experience as an ERP Business Systems Analyst or in a similar role supporting JD Edwards applications. Experience within the automotive industry is highly desirable., • 5+ years of experience developing In-depth knowledge of the JD Edwards platform, specifically in manufacturing or distribution modules. Experience with other JD Edwards modules is a plus., • Proficiency in JD Edwards configuration and integration with other systems. Experience with JD Edwards development tools is a plus., • 25%-50% Travel in the organizations’ global footprint.

Environmental Planning, Environmental Science, Engineering, or related field 5 to 10+ years of consulting experience in project management and technical team leadership Experience with regulatory agencies in New Mexico, Arizona, Nevada, and/or Utah Valid driver's license with a clean driving reco

Environmental Science, Engineering or related field, including Chemistry, Science. Using established procedures under supervision, administers and assists in implementing Environmental Protection (EP) programs in multiple assigned districts within a Market Area. Prepares, reviews and submits require

Job DescriptionBenefits: • Flexible schedule Overview: We are seeking enthusiastic and knowledgeable candidates for STEM Program Instructors to join our team. A background in STEM is a plus but not necessary. The ideal candidate is passionate about inspiring young minds through hands-on learning in Science, Technology, Engineering, and Mathematics (STEM) and enjoys working with youth ages 5-12. This is a part-time position with flexible scheduling. Instructors will receive appropriate training to support curriculum delivery. Priority will be given to candidates with formal training and prior experience working with elementary and adolescent learners. Key Responsibilities: • Deliver high-quality instruction in designated courses for children aged 5-12, • Develop and adapt lesson plans and instructional materials aligned with STEM education, • Facilitate interactive, inclusive, and engaging learning environments for young learners, • Teach coding skills using kid-friendly platforms such as Minecraft and other coding programs for children, • Assess student progress and provide constructive feedback, • Maintain accurate attendance and participation records, • Collaborate with the curriculum team for continuous improvement, • Participate in training sessions to learn new educational tools and programs, • Proven expertise in subject area (STEM, coding, or education for children aged 5-12), • Experience in teaching or training children preferred, • Strong communication, organizational, presentation and classroom management skills, • Ability to motivate and engage young learners

Job DescriptionJob Title: Data Solutions Architect Location: Buffalo, NY Hire Type: ContingentPay Range: $40.92 - $68.19/hourWork Type: Full-timeWork Model: RemoteWork Schedule: Monday – Friday, 9am – 5pm Recruiter Contact: Brian Fesmire, & Scope:Positional OverviewThe Imagine Group is recruiting for a Data Solutions Architect, on behalf of our client, a leading financial institution recognized for its strong community presence, customer-focused approach, and commitment to helping individuals and businesses succeed. in Buffalo, NY. In this role, you will be responsible for designing and delivering enterprise-grade data platforms and solutions that enable advanced analytics and business intelligence. This role requires deep expertise in data engineering, cloud-native architecture, and modern data technologies. The architect will work closely with engineering, product, and compliance teams to build secure, scalable, and regulatory-compliant data solutions. All solutions must align with the principles, standards, and reference architecture established by the Enterprise Architecture function, ensuring consistency, interoperability, and strategic fit across the organization.Role & Responsibility:Tasks That Will Lead to Your Success • Solution Architecture: Architect and deliver cloud-based data platforms (e.g., Azure Data Lake) and scalable data pipelines using technologies such as Databricks, Kafka, etc., • ETL/ELT Frameworks: Develop and implement ETL/ELT frameworks for ingesting, transforming, and integrating data from diverse sources, including legacy financial systems, SaaS platforms, and real-time data streams., • Data Platform Deployment: Design and oversee deployment of data warehouses, lakehouses, and analytics sandboxes to support business intelligence, machine learning, and reporting needs inclusive of Power BI and Snowflake., • Data Governance: Define and enforce data governance, metadata management, and data quality standards in accordance with Enterprise Architecture guidance and regulatory requirements., • Enterprise Architecture Collaboration: Collaborate with Enterprise Architecture to ensure all solutions adhere to architectural standards, reference models, and technology roadmaps. Vendor & Partner Engagement: Collaborate with external technology providers and service partners to ensure solutions meet enterprise standards for performance, cost-effectiveness, and agility in a highly regulated environment., • Technology Evaluation: Lead technical evaluations and proof-of-concept projects for emerging data technologies (e.g., real-time analytics, data mesh, AI/ML platforms)., • Technical Documentation: Produce deliverables such as architecture diagrams, data flow maps, security models, and technical documentation for solution handoff and operational support., • Agile/DevOps Leadership: Guide Agile/DevOps teams in implementing CI/CD pipelines, automated testing, and infrastructure-as-code for data solutions.Skills & ExperienceQualifications That Will Help You Thrive, • Bachelor’s/Master’s in computer science, Engineering, or related field., • AWS/Azure Solutions Architect, Certified Data Engineer, or similar., • 5+ years in solution architecture or technical implementation, with 2+ years in data engineering or enterprise data platforms., • Proficient in system design, integration, and implementation across multiple technology domains., • Proven track record in deploying scalable financial systems (e.g., payment gateways, digital wallets, stablecoin or cryptocurrency systems preferred)., • Hands-on experience with cloud platforms (Azure/AWS/GCP), containerization (Kubernetes), and DevOps practices., • Excellent communication, collaboration, and critical thinking skills., • Understanding of financial regulations, compliance, and security standards.

Job Description Build iconic structures that shape skylines. At Enclos Tensile Structures, we design, engineer, fabricate, and install custom tensile structures that define skylines and transform public spaces - from stadiums to transportation hubs and beyond. Our work blends architectural vision with advanced structural engineering to bring lightweight, high-performance structures to life. We're seeking an Associate Engineer to join our Buffalo-based engineering team. This is an exciting opportunity for an early-career civil structural engineer who is ready to apply their technical foundation to complex, creative, and highly visible projects. Enclos Tensile Structures is an award-winning design-build contractor specializing in the engineering and construction of custom lightweight structures. Our team has collaborated with many of the world's leading architects, designers, and developers to deliver projects that combine architectural expression with structural performance. Our portfolio spans everything from elegant, functional canopies to some of the most iconic tensile structures in the built environment. Notable projects include: • Allianz Field, • SoFi Stadium, • Intuit Dome, • ATLNext Central Passenger Terminal Complex The Associate Engineer works under the supervision of senior level engineers to assist in the development and engineering of custom tensile structures. Primary responsibilities include computer modeling and finite element analysis using proprietary large deflection software to size steel and cable components, as well as connection design, while meeting the structural requirements of the industry building codes and the specified requirements of the customer. ESSENTIAL DUTIES AND RESPONSIBILITIES • Modeling and analysis of tensioned membrane structures using finite element large deflection software., • Summarize and present engineering results in report format for client review and approval., • Working with a project designer to develop general arrangement drawings for client review and approval., • Create fabric cutting patterns meeting the geometry requirements of the project., • Coordinate project work in conjunction with the Project Manager, Supervising Engineer, and Project Designer to ensure timely and accurate completion of the assigned project., • Responsible for personal task management and adherence to deadlines and scope., • Strong demonstrated ability to analyze and design steel fabricated structures. To achieve success, candidates should demonstrate the following core competencies: Attention to detail, organizational skills, problem-solving, interpersonal skills, written and verbal communication, teamwork, professionalism, quality orientation, dependability, initiative, and collaboration/relationship management. REQUIREMENTS • 0-3 years of relevant engineering experience., • Engineer-in-Training (E.I.T.) Certificate, • Bachelor of Science (BS) degree in Civil or Structural Engineering, • Excellent verbal and written communication skills., • Strong theoretical background with specific knowledge relating to designing steel structures. At the Enclos family of companies, compensation is determined based on several factors including but not limited to work experience, education, geographic location, certifications, etc. Your recruiter can share more about the specific compensation package for your preferred role during the hiring process. The successful candidate for the Associate Engineer position in Buffalo, New York can expect to earn $65,000 to $75,000 annually. EQUAL OPPORTUNITY EMPLOYER Enclos Corp is committed to providing equal employment opportunity to all applicants and employees regardless of their race, creed, color, religion, sex, age, national origin, disability, military service, protected veteran status, genetic information, sexual orientation, gender identity, or any other characteristic protected by federal, state or local law. We are strongly committed to this policy and believe in the concept and spirit of the law. Enclos Corp is further committed to ensuring that employment decisions are based on valid job requirements. In addition, all employment actions, such as recruiting, hiring, training, promotion, compensation, benefits, transfer, layoff, and termination are administered fairly to all persons on an equal opportunity basis, without discrimination based on the protected categories named above. Enclos Corp will also provide qualified applicants and employees with disabilities reasonable accommodations, if possible, as required by law. Job Posted by ApplicantPro

Job Description We are currently seeking an Environmental Scientist, Geologist or Engineer to join our team in our Buffalo, NY office. The Environmental Scientist, Geologist or Engineer will perform various tasks including field work, soil and groundwater sampling, drilling supervision, report writing, and support project managers on various environmental projects in the northeastern United States. Duties • Soil and Groundwater Sampling, • Field Monitoring of various media, • Field Activities Supervision, • Drilling Supervision, • Data Tabulation, • 0-5 Years Experience, • BS in Geology, Environmental Science, Engineering or closely related field, • MS Office Suite, • Strong communication skills, critical thinking, creativity, • Field sampling experience, • 40 Hour OSHA Hazwoper a plus Salary Range: $24-$26 per hour The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description At the C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking an Electrical Project Engineer to join our Infrastructure Team as part of our Education, Healthcare and Public Facilities Group. The successful candidate will have experience in the design of medium and low voltage electrical systems for buildings, utilities, industrial, campus and facilities. The position will require working on and leading teams for designs of various projects. Candidate will have the opportunity to lead in the growth of the MEP development of staff and provide business opportunities for future projects. This position can be based in our Syracuse, Rochester, Buffalo or Albany office. Relocation assistance available to qualified candidates. Minimal travel estimated under 15%. Position Responsibilities • Ability to motivate and mentor junior staff., • Project management, communication and multi-tasking skills., • Ability to work with internal and external staff on an individual and team basis., • Ability to challenge one’s self and broaden knowledge base., • Bachelor's of Science or Technology in Electrical Engineering, • 5-10 years of related experience, • PE preferred, FE required, • Experience with the National Electric Code., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash., • Experience with the layout and design of low voltage building distribution systems. *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.