Trabajos Engineering en Antelope, California - Page 2Crear alertas

Job Description COMPANY OVERVIEW: Certerra is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, Certerra has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. POSITION OVERVIEW: We are seeking a full-time Staff/Project Geotechnical Engineer to join our Sacramento, CA team. At Certerra, you can look forward to working on a wide variety of interesting projects both in the field and in the office. JOB RESPONSIBILITIES: As a Staff/Project Geotechnical Engineer at Certerra, your will support lead geotechnical engineers to successfully complete geotechnical projects in ways that satisfy clients and minimize risks. The position, salary, and level of responsibilities assigned to the individual will be based on the experience level of the candidate. Under the supervision of a lead geotechnical engineer, you will be expected to: • Supervise subsurface investigations., • Perform engineering analyses including but not limited to settlement, seepage, slope stability, lateral load resistance, deep foundation analyses, soil-structure interaction, seismic deformation, and site-specific seismic hazard analyses., • Develop geotechnical design-level recommendations., • Observe geotechnical construction activities., • Write geotechnical reports, letters, and proposals., • Represent RMA at team and client meetings. JOB QUALIFICATIONS: The following minimum requirements apply to this position. • Bachelor’s degree in civil engineering or related field. Master of Science (MS) in Geotechnical Engineering preferred., • At least 3 years of relevant geotechnical experience for the project engineer position., • Excellent writing and communication skills., • Hold a valid driving license with a good standing driving record., • The employee occasionally is required to lift and/or move up to 25 pounds and to walk up to ½ mile daily. We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Job Description Our Civil Engineering Transportation Team in our Sacramento area (Roseville) office has an opportunity for a talented Project Civil Engineer / Sr. Project Civil Engineer (Transportation). At Psomas, you'll find a career with purpose and staying power. With 79 years of industry leadership, we have built a deeply rooted and stable client base. Many of our clients have trusted us with their projects for decades--proof of the lasting value we bring to every job. If you're looking to join a team that values longevity and stability while continuing to innovate and evolve, we'd love to hear from you. Explore this opportunity with Psomas and apply today! Position may be eligible for a potential sign-on bonus of up to $15,000 for highly qualified job candidates. Sign-on bonus amount will depend upon the qualifications and experience of the candidate.* About being our Project Engineer / Sr. Project Engineer - Transportation Psomas has an opening for a Project Civil Engineer / Sr. Project Civil Engineer with a focus on transportation related civil design. You will assist the Project Managers with the delivery of transportation projects. Our engineering team is currently involved in a variety of highway and local agency projects, including interchange design, roadway widening and rehabilitation, intersection improvements, complete streets, downtown revitalization, sidewalk and bicycle facilities, trails and parks, transit, drainage and water quality improvements. Typical projects include transformative active transportation, transit and roadway/highway projects for clients such as the Cities of Sacramento and Roseville, Caltrans and Sacramento Regional Transit District (SacRT). Our ideal candidate will bring their education and experience along with a collaborative spirit to begin work on both current and upcoming projects. Responsibility Highlights for our Project Engineer / Sr. Project Engineer - Transportation • Executing technical tasks and deliverables, and coordinating a broad range of assignments requiring previous experience on transportation projects (i.e. intersection/roadway widenings, highway widening, interchange, bike trails/paths, etc.), • Design efforts will be concentrated in transportation engineering which may include research & analysis, engineering studies, street and highway design, design of transit and bicycle facilities, drainage and water quality design, traffic control/stage construction design, signing/striping, and utility coordination, • Coordinating with sub-consultants and internal project team members, • Represent Psomas by meeting with clients, preparing and delivering presentations, • Provide direction and mentorship for younger engineers Minimum Qualifications to be our Project Engineer / Sr. Project Engineer - Transportation • Bachelor's degree in civil engineering or related discipline, • Professional Engineer (PE) license in the State of California, • 3+ years of progressively responsible professional experience in civil engineering (8+ years for Sr. PE), • Working knowledge in roadway design software and AutoCAD, • Must be familiar with Caltrans, local agency and AASHTO design standards and procedures, regulatory compliance and agency coordination Highlighted Benefits for our Project Engineer / Sr. Project Engineer - Transportation Enjoy hybrid and flexible work schedules, an inclusive benefit package providing medical, dental, and vision coverage for employee and qualifying family members, a 401(k) with immediate vested company match and an Employee Stock Ownership Plan that is 100% paid by Psomas! • A competitive salary! The expected range for this position is $100,000 - $150,000/salary depending on experience, • Position may be eligible for a potential sign-on bonus of up to $15,000 for highly qualified job candidates. Sign-on bonus amount will depend upon the qualifications and experience of the candidate.*, • A competitive salary! The expected range for this position is $100,000 - $150,000/salary depending on experience, • 8 Paid Holidays & 3-4 Weeks of PTO (depending on experience), • Career pathing, training + professional development, • Strong backlog of future work + diverse base of clients Strong History + Bright Future As a 100% employee owned company serving clients throughout the western U.S for over 78 years, Psomas is proud to be an award winning consulting firm with over 750 employees. Our talented team have an array of skills ranging from construction management, civil engineering, transportation planning, environmental, landscape architecture and urban design, and surveying and geospatial services. We strive for excellence, and welcome candidates of all identities, backgrounds, and perspectives to help us continue evolving as an inclusive, employee first culture. Together, we foster a collaborative work environment, promote teamwork, and provide many opportunities for professional growth and advancement. We are looking for team members that are excited to contribute to our projects and make a positive difference in our local community. We're a fun, rewarding place to work! We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. *Sign-on bonus not applicable for candidates presented by outside recruiters or agencies. Job Posted by ApplicantPro

Job Description Apply Here: Before applying for this job, please read description in its entirety and if you are qualified and interested, follow the directions to apply. Harris & Bruno International is looking for a Manufacturing Engineer to work in a high pace manufacturing environment. This individual will be expected to: • Carry out process improvement, problem resolution, project management and employee training., • Improve manufacturing processes and methods for cost reduction, quality improvement and efficiency. Prepare and present plans and coordinate deployment including training of team., • Designs, develops, and tests and/or sources and cost-justify various tools, machinery and equipment for recommended manufacturing methods., • Assist in improving production control, standard operating procedures, safety, quality control and training., • Perform research, design, and development of manufacturing processes including production flow, assembly methods and production equipment., • Prepare and maintain detailed layouts of building and equipment., • Coordinate the manufacturing launch of new/revised products including establishing goals, training team members and evaluating results., • Perform product/process analysis for cost reduction, quality improvement, and improved efficiency., • Represent manufacturing on cross functional teams., • Knowledge/skills:, • Technical Capacity., • Proficient at problem solving and analysis., • Leadership., • Communication proficiency., • Detail-oriented with a commitment to quality and safety., • Education/Experience: Bachelor's degree in Engineer required., • 3 or more years' experience as a Manufacturing Engineer., • Experience with 3-D Modeling Benefits Package Includes: • Medical, • Dental, • Voluntary Vision, • Company provided life insurance with the option of additional voluntary life insurance., • 401k with employer match., • Robust PTO policy beginning with 3 weeks earned the first year., • Paid holidays. Harris & Bruno International is a stable company that has been in business since 1948. We are experiencing regular, steady growth in our core and developing product lines. We enjoy a strong presence in the rapidly expanding commercial printing market supporting customers who package products that you use every day.

Job Description Overview: Core States Group designs, builds, and manages programs and projects across North America and has been recognized on top lists throughout the architecture, engineering, and construction (A/E/C) industry. Established in 1999, the company offers integrated solutions with seamless continuity, and many of the world’s most notable brands count on Core States Group to deliver speed to market, cost certainty, and compelling design. With 23 offices across the United States and Canada, Core States Group is an industry powerhouse that drives innovation and improves everyday life for countless people across several markets, including Convenience, Distributed Generation, Financial, Grocery, Housing, Industrial, Restaurants, Retail, Semiconductor, Tribal, Zero-Emission Vehicle (ZEV) Infrastructure, and more. Visit us at . Summary of Position: As an Electrical Engineering Designer, you’ll get hands-on experience working on real projects across the U.S. while learning directly from seasoned engineers. Your degree can lead you to: • Building System design, • EV Charging Station design This is your chance to grow, learn, and contribute to projects that shape communities, all while building the foundation for an exciting career in architecture and engineering. Essential Duties and Responsibilities: • Apply civil engineering concepts to develop solutions to project challenges, • Preparation of construction plans, cost estimates, reports, and other project documents, • Coordination with review agencies, clients, and sub-consultants for permit application, • Preparation of grading plans, profiles, road design, and details using AutoCAD Civil 3D, • Research regulatory requirements and design standards, • Perform detailed and complex calculations for storm water facilities, utility systems, and roadway improvements, • Preparation of detailed technical reports and project presentation materials, • Assist project engineers in completing projects in a timely manner and within project budgets, • Attend project meetings Qualifications: • Currently enrolled as a Senior, graduating with a Bachelor's degree in Electrical Engineering in Winter 2025 or Spring 2026, • EIT is a plus but not required, • Experience working with Revit and AutoCAD software is a plus Team: You will work with a team of Designers, Professional Engineers and Project Managers. Work Location: This role can be based out of various of our office locations, including Kent, WA; Bellevue, WA; Puyallup, WA; Richland, WA; Chehalis, WA; Roseville, CA; Ontario, CA; Bentonville, AR; Farmers Branch, TX; Philadelphia, PA; West Chester, PA; Tampa, FL; and Somerville, NJ. Only candidates in close proximity to these locations will be considered. Benefits: • COMPENSATION – Competitive wages and bonus programs, • RETIREMENT – We offer a great 401(k) match to help you invest in your future and grow your retirement savings with confidence., • HEALTHCARE – Excellent health benefits, life insurance options, and supplemental benefit options, giving you the flexibility to choose the coverage that best fits your needs and lifestyle., • VACATION – Generous PTO time to help you recharge, relax, and maintain a healthy work-life balance., • PERKS – Team wellness challenges, Costco membership reimbursement, half-day Fridays during summer months + much more!, • WORK-LIFE BALANCE – A flexible work environment that supports a healthy work-life balance, whether you’re in the office, working remotely, or somewhere in between., • PAID PARENTAL LEAVE – Four weeks of fully paid parental leave to give you time to bond with your new addition and support your growing family., • TUITION REIMBURSEMENT – Advance your education with support! We offer tuition reimbursement to support your learning journey. Note: Please do not be concerned if you do not meet every requirement. At Core States we are dedicated to building a diverse and inclusive workplace, so if you are excited about this role but your experience does not align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. This position will remain open until it is filled.

Job DescriptionMechanical Engineer III Tri Tool is a global leader in the design of high-performance machine tools. More importantly, we design solutions and are problem solvers. We are uncompromising in our dedication to our clients’ success and operate with leadership, partnership, and performance at the forefront of every mission. For more than 50 years, we have partnered with companies in major industrial markets—aerospace, government and defense, life sciences, power generation, oil and gas, and semiconductor—to design, develop, and manufacture precision machining and custom engineered tools that increase productivity, optimize costs, and accelerate delivery. The Opportunity: With limited supervision, the Mechanical Engineer III is responsible for mechanical design and drafting of industrial tools and machinery for pipe and tube machining and welding applications. The successful candidate will be self-motivated and have a veracious drive for learning and professional growth. This is a full-time position within the engineering department and is based at Tri Tool's headquarters in Rancho Cordova, California. Our Compensation and Benefits show how much we value our team: • Starting Pay Range $91,100 to $115,000 depending on experience, • This is a full time, exempt, salaried position, • Medical/ Dental/ Vision, • 401K Responsibilities: • *Collaborate and strategize with colleagues in the engineering, production/manufacturing, product management, service, and repair departments to solve problems and develop innovative world-class products., • *Complete manufacturing and assembly mechanical drawings, tolerance analysis/stack-ups, and other documentation per ASME Y14.5M standards using SolidWorks CAD software., • *Design and drafting of mechanical tools, fixtures, and machine components and subassemblies., • *Assigned projects involve the following key areas: bill of materials structure, materials selection, strength of materials, static thermodynamic conditions and environments, metal plating and coatings, assembly and joining hardware, various manufacturing processes, and specification of required tolerances with manufacturing cost in mind., • *Electromechanical system design and specification (AC and DC motors, servo motors, solenoids, actuators)., • *Pneumatic and hydraulic system design and specifications with cylinders, actuators, valves, regulators, hoses, and fittings., • *Maintain accurate component information, revisions, and manufacturing bills of materials within Tri Tool’s ERP system (Info Syteline)., • *Manage medium and large sized projects with little direction and execute engineering tasks and projects to completion with a high level of independence., • *Assist and/or lead proposal and business development deliverables, including equipment cost and risk analysis., • *Hands-on problem solving and assembly and testing of prototypes within an R&D shop environment. Qualifications: MINIMUM QUALIFICATIONS: • Minimum ten (10) years of applicable professional experience in mechanical design, drafting, fabrication, assembly, and testing of mechanical tools or systems. Master’s level engineering degree completion and three (3) or more years of applicable professional experience may be considered., • Prior experience using SolidWorks or other 3D CAD and drafting tools is required., • Knowledgeable of GD&T tolerancing methods and their appropriate application., • High level of attention to detail and completeness of work., • A tenacious attitude and drive to deliver results within schedule., • Part design for Additive Manufacturing, • Manufacturing process development for Additive Manufacturing, • Machine and tool design for portable and/or in situ industrial tool industries, • CNC machine and mechanism design, • Design of consumable metal cutting tools, such as endmills, indexable inserts and holders, turning tools, etc., • Bachelor’s Degree in Mechanical or Industrial Engineering from an ABET-accredited college or university. Powered by JazzHR hsPuAO9s0a

Job DescriptionMechanical Engineer II Tri Tool is a global leader in the design of high-performance machine tools. More importantly, we design solutions and are problem solvers. We are uncompromising in our dedication to our clients’ success and operate with leadership, partnership, and performance at the forefront of every mission. For more than 50 years, we have partnered with companies in major industrial markets—aerospace, government and defense, life sciences, power generation, oil and gas, and semiconductor—to design, develop, and manufacture precision machining and custom engineered tools that increase productivity, optimize costs, and accelerate delivery. The Opportunity: With limited supervision, the Mechanical Engineer II is responsible for mechanical design and drafting of industrial tools and machinery for pipe and tube machining and welding applications. The successful candidate will be self-motivated and have a veracious drive for learning and professional growth. This is a full-time position within the engineering department and is based at Tri Tool's headquarters in Rancho Cordova, California. Our Compensation and Benefits show how much we value our team: • Starting Pay Range $79,900 to $93,500 depending on experience, • This is a full time, exempt, salaried position, • Medical/ Dental/ Vision, • 401K Responsibilities: • *Collaborate and strategize with colleagues in the engineering, production/manufacturing, product management, service, and repair departments to solve problems and develop innovative world-class products., • *Complete manufacturing and assembly mechanical drawings, tolerance analysis/stack-ups, and other documentation per ASME Y14.5M standards using SolidWorks CAD software., • *Design and drafting of mechanical tools, fixtures, and machine components and subassemblies., • *Assigned projects involve the following key areas: bill of materials structure, materials selection, strength of materials, static thermodynamic conditions and environments, metal plating and coatings, assembly and joining hardware, various manufacturing processes, and specification of required tolerances with manufacturing cost in mind., • *Electromechanical system design and specifications including AC and DC motors, servo motors, solenoids, and actuators., • *Pneumatic and hydraulic system design and specifications with cylinders, actuators, valves, regulators, hoses, and fittings., • *Maintain accurate component information, revisions, and manufacturing bills of materials within ERP., • *Manage small and medium sized projects with some direction and execute engineering tasks and projects to completion with a general level of independence., • *Hands-on problem solving and assembly and testing of prototypes within an R&D shop environment. Qualifications: MINIMUM QUALIFICATIONS: • Minimum five (5) years of applicable professional experience in mechanical design, drafting, fabrication, assembly, and testing of mechanical tools or systems. Master’s level engineering degree completion and three (3) or more years of applicable professional experience may be considered., • Prior experience using SolidWorks or other 3D CAD and drafting tools is required., • Knowledgeable of GD&T tolerancing methods and their appropriate application., • High level of attention to detail and completeness of work., • A tenacious attitude and drive to deliver results within schedule., • Part design for Additive Manufacturing, • Manufacturing process development for Additive Manufacturing, • Machine and tool design for portable and/or in situ industrial tool industries, • CNC machine and mechanism design, • Design of consumable metal cutting tools, such as endmills, indexable inserts and holders, turning tools, etc., • Bachelor’s Degree in Mechanical or Industrial Engineering from an ABET-accredited college or university. Powered by JazzHR XVnjdkMUp9

Job DescriptionForgen is dedicated to building a better future - for generations. Location: Rocklin, CA Position Summary Apply the general knowledge of the physical sciences and mathematics underlying engineering and specialized knowledge of the mechanics of solids (particularly of soils), hydraulics, theory of structure, strength of materials, engineering geology and surveying. The Project Engineer will assist with the overall execution of projects in accordance with the established budget, schedule, contract plans and specifications. Ensure the company's safety culture is documented, communicated, and enforced in accordance with the company's established policies and procedures. Forgen Overview Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work. Key Responsibilities • Perform Project specific engineering support, including:, • Preparing project submittals., • Maintaining project record documents., • Perform technical review of contract plans and specifications., • Provide oversight and documentation related to project quality control in accordance with the contract plans, specifications, and company policies and procedures., • Preparing daily construction reports and progress tracking., • Manage, interpret, and perform site surveying., • Assist with the management of subcontractors., • Assist with the procurement or rental of equipment and materials., • Assist Project Manager with project daily cost reporting and tracking., • Perform Office engineering support, including:, • Assist in the development of project cost estimates, proposals, and material take-offs., • Perform technical analysis of the remediation methodologies of various previously remediated projects., • Perform other administrative or office duties as required or as assigned., • Travel to project sites as necessary for extended durations., • Adhere to all federal, state, and local regulations., • Excellent computer skills including knowledge and experience with Microsoft Office, Outlook, and Excel., • Must be able to thoroughly understand the scope of a project through plans and project specifications., • Advanced knowledge of construction engineering technology, codes and standards, and an in-depth understanding of the interdependence and relationship between other functional units., • BS, Civil Engineering, Construction Management or equivalent preferred but not mandatory., • 5 – 10 years of experience doing the following:, • Experience with AutoCAD Civil 3D software., • Experience with Primavera P6 scheduling software., • Experience with Microsoft Project scheduling software., • Experience with USACE QCS System., • Experience with site surveying, both conventional and GPS., • Assisting with the development of cost estimates and proposals., • Prior experience with materials procurement and purchasing., • The following safety training is preferred, but not mandatory. Company will provide additional training, as necessary., • 40 Hour HAZWOPER training., • Competent Person Safety Training, • 8-Hour Supervisory Training, • 30-Hour OSHA Construction Safety Training This office-based role requires frequent computer use and effective communication, with occasional travel to project sites as needed. Site visits may involve extended periods of standing or walking and required PPE, with potential exposure to heavy equipment, chemicals, dust, fumes, uneven terrain, and extreme weather. This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk. Perks and Benefits Forgen offers a comprehensive benefits package, including medical, dental, vision, retirement plans, bonuses, paid time off, and more. We support a flexible work model for most non-craft positions and provide additional perks like education assistance, wellness programs, and employee awards. Pay Range$100,000—$125,000 USD Equal Opportunity Forgen is an equal-opportunity employer and prohibits discrimination based on any legally protected status. Privacy Policy At Forgen, we are committed to protecting your privacy. We collect and use your personal data to manage the recruitment process, including assessing your application, verifying information, and, if applicable, entering into an employment contract. Your information may be shared with authorized third parties who perform services on our behalf, such as background checks, and only where permitted by law. We implement appropriate security measures to safeguard your information and retain it only as long as necessary for recruitment and legal purposes. You have the right to access, correct, or request deletion of your data, and to withdraw your consent at any time where applicable. For questions or to exercise your rights, please contact . California Privacy Policy Agency Policy

Job DescriptionSummary We are seeking a proactive and detail-oriented Project Engineer to support our commercial Mechanical, Electrical, and Plumbing (MEP) construction projects across the Rancho Cordova and Sacramento markets. This role offers an excellent opportunity to grow your career in a design-build environment, gaining hands-on experience in project coordination, estimating, scheduling, and technical support. Key Responsibilities * Support internal teams across engineering, purchasing, construction, and accounting departments to ensure smooth project execution. * Coordinate procurement of materials, delivery timelines, and field installation processes. * Maintain organized and up-to-date documentation, including RFIs, submittals, purchase orders, daily reports, and procurement logs. * Track labor hours, material usage, and project costs, updating progress reports for management. * Attend kick-off, progress, and subcontractor coordination meetings, providing clear communication across teams. * Conduct site visits to assess installation progress, identify and resolve field challenges, and ensure alignment with design intent. * Build and maintain collaborative relationships with subcontractors, clients, vendors, and project stakeholders. * Participate in ongoing efforts to improve internal processes, workflows, and project delivery. Qualifications Education: * Bachelor’s degree in Construction Management, Engineering, or a related technical field. Experience: * Minimum 2+ years of experience in project coordination or project engineering, preferably within MEP construction or design-build environments. Skills: * Strong communication, problem-solving, and organizational skills. * Proficient in Microsoft Office Suite (Excel, Word, Outlook); familiarity with AutoCAD and Bid Tracer is a plus. * Ability to interpret construction drawings and coordinate with cross-functional teams. Requirements: * Ability to travel to job sites in the local region. * Must have a valid driver’s license and clean driving record. * Capable of performing physical site inspections, including climbing ladders and navigating active job sites. Compensation & Benefits * Competitive salary based on experience. * Comprehensive medical, dental, and vision insurance. * 401(k) plan with company match. * Employee Stock Ownership Plan (ESOP) participation. * Paid holidays, vacation, and sick leave. * Access to training programs, mentorship, and career development within a growing, employee-owned company.

Job Description Semiconductor Design Engineer 5 Duties: • Performs semiconductor design engineering assignments including engineering and designing chip layout circuits, circuit checking, documenting specifications, modifying and evaluating semiconductor devices and components. Reviews product requirements and logic diagrams for device definition. Typically responsible for projects, or portions of projects, to design, fabricate, modify, and evaluate semiconductor devices and components. Requirements:, • 10+ years of experience, • Strong background in IO definition, clocking, voltage domain crossing, • Understand and drive Floor-planning, implication to IO design and Physical/Electrical requirements, • Drive & Influence Signaling, Power rail/bump-pattern, ESD definition, Pkg design, board design, • Strong background in Custom data-path definitions and power efficient designs Compensation:, • $90-100/hr W—2Req ID:, • 5218

Job DescriptionDescriptionAre you seeking a career where you can foster a positive working environment and enhance employee relations? Do you possess flexibility, proactivity, approachability, a knack for problem-solving, and a good sense of humor? If so, you’ve found the right place! Wood Rodgers, a leading engineering consulting firm, is hiring a civil engineer to join our Land Development Division. The primary duties of this position include, but are not limited to, preparing engineering studies for grading, sanitary sewer, drainage and water systems, preparation of construction plans, specifications and cost estimates (PS&E) for infrastructure improvements including roads, sewer and water systems, grading and drainage facilities for a variety of private and public projects. Project assignments may include entitlement/tentative maps and subdivisions and site developments, infrastructure planning, roadway and utility Capital Improvement Programs. Duties require ability to perform engineering analyses and prepare related reports such as hydraulic analyses, alternatives analyses and development of designs using Computer Aided Design (AutoCAD) applications. Takes direction from a principal engineer, department head or project manager. This is a staffed, hourly, non-exempt position. A day in the life as a Wood Rodgers’ Engineer • Preparation of engineering analysis, designs, and calculations for private improvement projects., • Assist in the preparation of construction plans, and cost estimates., • Assist with construction submittal reviews, requests for information (RFI), and other construction related activities., • Coordinate with other design team members and public agencies., • Perform technical analyses and simulations to evaluate the feasibility and performance of engineering solutions., • Bachelor’s degree in Civil Engineering is required., • Minimum of 3 years of relevant experience., • Registration as a Professional Engineer (PE) is required., • Demonstrated knowledge of civil engineering principles, practices, and methods., • Proficient in using AutoCAD, including Civil 3D, and Microsoft Office Suite., • Demonstrated ability to gather, organize, and analyze engineering data, and produce comprehensive reports., • Proven capability to efficiently manage a variety of engineering functions, work effectively as part of an engineering team, and possess excellent interpersonal skills.A note on hourly pay ranges The range does not reflect geographic variations and may fluctuate above or below the stated amount. Offers will be based on several factors, including experience, education, skills, licensure, certifications, training, and location. Base pay is just one part of the comprehensive compensation package offered by Wood Rodgers. If you feel you meet the requirements but may be outside of the pay range, please apply anyway and let’s talk through it. How we elevate your gameJoining Wood Rodgers comes with perks to support you in your personal and professional journey. • A Unique Culture: We’re an engineering firm that feels refreshingly different. As inventors who ask, “why not?”, our leadership empowers employees to grow, challenge conventions, and develop creative solutions. We host grand parties, offer surprise days off, and consistently reinvest in our employees rather than focusing solely on corporate profits. While these perks contribute to our vibrant culture, it's the remarkable people at the heart of it all - individuals who are passionate about learning, teaching, helping, and collaborating., • Teamwork: Experience what it means to be part of the Wood Rodgers family. Be inspired by your leaders, supported and encouraged by your teammates to live a full and exciting life, and receive holistic support in your work and personal endeavors. Visit our website or follow us on social media @woodrodgersinc to get a glimpse of our dynamic community!, • Learning + Development: Engage in leadership development programs and goal setting to unlock new possibilities for your career and life. Grow within the company through mentorship and achieve your potential as a leader from the moment you’re hired.

Job DescriptionCompany Description The Bosch Group operates in most countries in the world. With over 400,000 associates, a career at Bosch offers a chance to grow an exceptional career in an environment that values diversity, initiative, and a drive for results. If you are interested in working on the cutting-edge of technology, working at Bosch is the place for you! Bosch is expanding its semiconductor business with silicon carbide chips in the U.S. and plans to invest some $1.9 billion in the Roseville site in California in the coming years. The first SiC semiconductors will be produced here on 200-millimeter wafers as of 2026. We are committed to quality at Bosch. Our environment celebrates diversity and promotes career progression. We seek highly-skilled, creative, results-oriented people who can look at technology from a new perspective and provide surprising insight. We are looking for candidates who want to shape and drive innovation at Bosch. Job Description We are seeking a highly skilled and experienced characterization engineer for our silicon carbide power semiconductor team. As a characterization engineer you play a critical role in developing innovative power semiconductor components (SiC PowerMOSFET) for use in the automotive electronics, under tight timing with demanding customers in the automotive market. You will work in a simultaneous engineering (SE) team for particularly energy-efficient components for battery-based or fuel cell-based drives. You will coordinate measuring high-performance SiC power semiconductors, perform characterization measurements, create the test reports and report in the SE team. Furthermore, you will be involved in the scaling of the lab as we grow in this fast-paced market. You will understand the function and switching properties of power semiconductors and the measurement technology used. In close cooperation with the application engineers, you define standardized measurements and evaluations, create graphical representations and tables and generate automated measurement reports. Being responsible for the correctness of the content of the datasheets you evaluate and present the results in the SE-team and in front of internal and external customers. You will be responsible for the following: • Characterization measurements of power semiconductors based on silicon carbide., • Planning and Execution of lab activities within an international team., • Scaling of lab facility including release of new measurement equipment according to the Bosch requirements for the automotive market., • Close coordination with the project manager and application expert in the product areas to consider costs, deadlines and quality, and to assess project risks regarding technical feasibility, effort of change requests., • Selection of the measurement technique and/or assessment of suitability., • Participation in project reviews to present technical content.Qualifications, • Completed university studies (Bachelor, Master or equivalent) in electrical engineering, semiconductor device physics, or the equivalent in education., • 0-4 years exp in semiconductor device characterization., • Sound knowledge of power semiconductor devices (MOSFETs) as well as characterization methods and measurement techniques thereof., • Experienced user of MATLAB and LabView., • Proven track record in problem-solving., • Excellent written and oral communication skills., • Knowledge of power semiconductor manufacturing processes desirable, • Knowledge of PCB design or Altium Designer desirable, • Travel (including internationally) as needed., • Knowledge of German language (speak, write, read) is a plus. Additional Information • This role will work on site in Roseville, CA., • This position works Monday- Friday, additional hours as necessary. BOSCH is a proud supporter of STEM (Science, Technology, Engineering & Mathematics) Initiatives: • FIRST Robotics (For Inspiration and Recognition of Science and Technology) To Learn what it is like to work at Bosch: Manufacturing at Bosch | We create technology that is "Invented for Life" | Careers at Bosch USA - YouTube The U.S. base salary range for this full-time position is $80,000-$100,000. Within the range, individual pay is determined based on several factors, including, but not limited to, work experience and job knowledge, complexity of the role, job location, etc. Your Recruiter can share more details about the specific salary range for this position during the interview process In addition to your base salary, Bosch offers a comprehensive benefits package that includes health, dental, and vision plans; health savings accounts (HSA); flexible spending accounts; 401(K) retirement plan with an attractive employer match; wellness programs; life insurance; long term disability insurance; paid time off; parental leave. Pay ranges included in the postings, when included, generally reflect base salary; certain positions may include bonus, or additional benefits.

Job Description ASIC Engineer 5 Duties: • Oversees definition, design, verification, and documentation for ASIC development., • Determines architecture design, logic design, and system simulation., • Defines module interfaces/formats for simulation., • Contributes to the development of multidimensional designs involving the layout of complex integrated circuits., • Evaluates all aspects of the process flow from high-level design to synthesis, place and route, and timing and power use., • Analyzes equipment to establish operation data, conducts experimental tests, and evaluates results., • May also review vendor capability to support development., • SoC Arch, • Architect to look into Full end2end Data-path, • Drive initialization, reset flow and design implications to other blocks, • Drive Different Clock domain crossing, distribution and dependency, • Drive Power-domains, level-shifting, power-management requirement, • Drive DFX requirement – including BSCAN, JTAG Requirements:, • 10+ years of experience Compensation:, • $98.12 - 107.21/hr W—2Req ID:, • 5219

Job DescriptionSalary: $125,000 - $175,000 Since 1995, BENEN has excelled in providing expert civil engineering services, covering transportation, wastewater, water, city engineering, urban design, and site development. Our commitment to seamless client experiences matches our focus on staff cohesion and skill throughout each project. We pride ourselves on staff retention, and building trust with our diverse clientele, including cities, counties, and various firms in engineering, architecture, and private development. Our core values emphasize client satisfaction, employee well-being, and family. We foster a workplace that balances professional growth with personal life, creating a strong, family-like professional community. Position Summary: As a Senior Civil Transportation Engineer, you will lead and oversee key transportation for a variety of clients including Caltrans as well as city and county projects, bringing your seasoned expertise to the planning design and delivery of the project. Your role will involve managing teams, collaborating closely with clients and stakeholders, and ensuring strict adherence to standards. Beyond your technical contributions, you will play a pivotal role in budgeting, quality control, and introducing innovative solutions to enhance and optimize transportation networks. Essential Roles and Responsibilities • Assists with the planning and scheduling of engineering tasks within a specific discipline and across disciplines., • Initiates and maintains relationships with engineers and with key engineering officials from external partners. Acts as the technical point of contact for project managers., • Retains an advanced level of knowledge of the disciplines material costs, cost analysis and estimating., • Provides technical engineering leadership for a discipline, making decisions and recommendations, while offering guidance to engineering staff and supporting various engineering teams., • Participates in the development of proposals, including scopes, budgets, and schedules., • Acts as lead Engineer in charge of maintaining and approving engineering deliverables., • Applies intensive and diversified knowledge of engineering principles and practices., • Prepares designs, calculations, sketches, diagrams, schematic drawings, reports, plans, specifications, and estimates for applicable projects., • Collaborates with project team including sub-consultants and clients., • Acts independently on technical matters with minimal supervision., • Conducts quality control review of design calculations, drawings, specifications, reports, and other technical documents., • Bachelor's Degree in Civil Engineering or related field, • Registered as a Professional Engineer in Civil Engineering, • 10+ years Civil Engineering experience; or equivalent combination of education and experience., • Proficiency in using MicroStation (InRoads/OpenRoads) and/or AutoCAD Civil 3D Supplemental Pay Types • Performance Bonuses, • Referral Bonuses Compensation $125,000 - $175,000

Job Description All Systems Electrical, Inc. is looking for a Controls Engineering Manager with deep expertise in AutoCAD Electrical, UL508A panel design, and team leadership. This role is not for a programmer—it’s for someone who thrives in control panel layout, wiring schematics, and standards-based design, and is ready to lead others in doing the same. If you're passionate about design accuracy, standards compliance, and mentoring engineers in the details that matter most—this is the opportunity you're looking for. Key Responsibilities: * Lead and mentor a team of control panel designers and engineers across multiple industrial projects * Oversee all aspects of control panel layout and schematic development using AutoCAD Electrical * Ensure all designs comply with UL508A, NEC, and relevant industry codes and practices * Review design work for accuracy, consistency, and adherence to internal and customer standards * Act as a technical lead for panel design—providing guidance, resolving challenges, and setting direction * Collaborate closely with production, project management, and sales to align engineering output with customer and business requirements * Maintain project schedules, allocate resources, and prioritize tasks across the engineering team What You Bring: * Bachelor’s degree in Electrical Engineering or related field * 7+ years of experience in control system and panel design * 2+ years of direct leadership or engineering management experience * High proficiency with AutoCAD Electrical (required) * Strong knowledge of UL508A, NEC, and best practices in industrial control panel design * Experience working in a manufacturing or industrial project environment * Excellent communication, organizational, and leadership skills Compensation & Benefits: * Salary range: $100,000 – $150,000, depending on experience * Key leadership role with influence on engineering strategy and standards * Medical, dental, and life insurance * Long-term disability insurance * 401(k) with company match * Paid time off and holidays * Career growth and development opportunities Powered by JazzHR YHMEPvG9um

Engineering Geologist - Project Manager.As an Engineering Geologist Project Manager with Civil & Environmental Consultants, Inc.CEC), you will be responsible for managing current clients and developing new business, as well as managing projects, mentoring junior staff, and providing senior direction

Senior Project Manager - Engineering.At HDR, our employee-owners are fully engaged in creating a welcoming environment where each of us is valued and respected, a place where everyone is empowered to bring their authentic selves and novel ideas to work every day.As we foster a culture of inclusion t

The Chief Engineer is responsible for the day-to-day operations of the engineering division. Supervise and train all Engineering staff in Customer Service, Empowerment, Standard Operating Procedures and Loss Prevention. Create and post all Engineering staffs schedules.

Solution Architect Job Duties: Responsible for assisting in the establishment of an IT Architecture practice, and the adoption of an architecture and standards methodology. Directly assists in the development of a solutions architecture program including departmental roadmaps and project portfolios

As an AWS Cloud Engineer, leverage your cloud expertise to design, implement, and maintain innovative solutions that improve healthcare delivery.You will play a key role in building scalable, secure, and robust AWS infrastructure while contributing to a mission-driven organization focused on serving

Description: - Enable Skills-Based Hiring No <tr fgId=&

DevOps & Automation: Collaborate with engineering teams to build and optimize CI/CD pipelines, automate deployments, and streamline release processes. Customer & Stakeholder Support: Act as the liaison between engineering and business teams to ensure smooth delivery, platform reliability, an

If you're a Project Engineer and you want to join an amazingly supportive and fun Civil and Construction Engineering Management Company where there is a Base Salary, Bonus, Gifted Stock from Day 1 and Full Benefits and there's Growth, then apply now! This Jobot Job is hosted by: Jennifer Thomas Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. Salary: $100,000 - $150,000 per year A bit about us: We are a 100% employee-owned, award-winning Civil Engineering/Construction Firm specializing in construction management, engineering, environment, surveying and geospatial. We're 600+ employees strong with a rich 75-year legacy, and we're experiencing tremendous growth, which means plenty of opportunity and the added values of agility and flexibility that you can only get with a midsize firm. Why join us? Competitive Compensation and Bonus Programs Employer Paid Benefits including Medical, Dental, Vision, Life Insurance, Disability and Transit Support Employee Stock Ownership Program (Gifted Stock Day 1 and 401K with Employer Match ) Hybrid + Flexible work schedules Paid Holidays + PTO Career Pathing, Training, Development and Tuition Reimbursement Company Perks and Events, Activities, Celebrations and more! Work/Life Balance! Job Details We are looking for a Project Engineer OR Sr. Project Engineer for our client's Transportation Team in our Roseville / Sacramento area office, you will assist the Project Managers with the delivery of multiple projects for public agency and private clients while working on transportation projects. Responsibilities: • Responsible for organizing and executing technical tasks and deliverables, and coordinating a broad range of assignments requiring previous experience on transportation projects (i.e. intersection/roadway widenings, highway widening, interchange, bike trails/paths, etc.)., • Under limited supervision, providing support to project team for all necessary design services, direction, coordination, and follow-up on the work duties assigned to ensure high quality deliverables are prepared, efficiency levels are maintained, and client satisfaction exceeded., • Design efforts will be concentrated in transportation engineering which may include research & analysis, engineering studies, street and highway design, design of transit and bicycle facilities, drainage and water quality design, traffic control/stage construction design, signing/striping, and utility coordination., • Coordinating with sub-consultants, internal project team members and managing activities of internal staff., • Establishing and monitoring adherence to project schedule and budget. Bachelor's Degree in Civil Engineering or related discipline. Professional Engineer (PE) license in the State of California - 3 years in a PE role. 3-8 years of experience with skills to navigate multi-disciplined Civil Engineering projects. Current working knowledge in Roadway Design software utilizing AutoCAD Civil3D. Civil3D proficiency will be considered favorably. Must be familiar with Caltrans, local agency and AASHTO design standards and procedures, regulatory compliance and agency coordination. Preferred Qualifications: MicroStation and OpenRoads knowledge Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal.