Equipment engineer jobs in Medford, New YorkCreate job alerts

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

A Production Test Engineer I is an essential part of our production and engineering teams. You work closely with engineering and production personnel, utilizing your advanced knowledge of electronic measuring equipment and testing methodologies to perform bench level and automated testing, including

Job Description Job Title: Architectural Millwork Engineer Location: Long Island, NY Industry: Architectural Woodwork / Millwork (not residential cabinetry or fixtures) Description: We are seeking an experienced Millwork Engineer to join our team in a fast-paced, fully automated architectural millwork environment. The ideal candidate is a highly skilled professional with extensive experience in Microvellum and a deep understanding of custom architectural woodworking fabrication. Precision, efficiency, and familiarity with automated manufacturing processes are essential. Responsibilities: * Develop and prepare detailed engineering and shop drawings using Microvellum (AutoCAD-based). * Interface directly with CNC fabrication equipment; ensure drawings are optimized for production through Microvellum workflows. * Translate architectural and design intent into accurate, buildable millwork components. * Collaborate closely with project managers, production teams, and installers to maintain accuracy and production efficiency. * Work within a fully automated shop environment supporting high-end, custom architectural projects. * Maintain strict quality standards—errors in programming or design have significant production impact. Requirements: * Minimum 10 years of experience in architectural millwork engineering or related fields. * Expert-level proficiency in Microvellum—must already be fluent; this position is not for candidates transitioning from AutoCAD. * Strong understanding of custom woodwork fabrication and construction methods. * Ability to manage multiple projects and priorities in a fast-paced production environment. * Preference for candidates local to Long Island, NY – relocation is not available. * Exceptional attention to detail, problem-solving ability, and technical accuracy. Benefits: * Comprehensive medical, dental, and vision coverage * 401(k) with 20% employer match * Paid vacation, sick, and personal days * Merit-based bonuses * Transportation reimbursement for NYC-based projects Contact:Phone: 605.210.5066Email: Equal Opportunity Employer: We are an Equal Opportunity Employer and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Job Description Job Title: Engineering Technician Job Description We are seeking a motivated Engineering Technician to support the testing, troubleshooting, and continuous improvement of complex electrical and electronic products. This role is well-suited for either an experienced hands-on technician or an entry-level Electrical Engineer who enjoys working at the component level and collaborating closely with Engineering and Manufacturing teams. You will play a critical role in diagnosing product and test equipment issues, improving test processes, and supporting production schedules in a highly collaborative, bench-focused environment. This is an excellent opportunity for someone looking to grow long-term within a large, stable, and expanding organization. Key Responsibilities • Perform functional and component-level testing and troubleshooting on complex electrical assemblies, • Diagnose failures in test equipment or fixtures and implement corrective actions, • Set up, operate, and adjust manual and automated test equipment, • Collaborate with Electrical Engineering and Manufacturing to clarify designs and improve manufacturability, • Document and communicate detailed technical issues, root cause findings, and test results to Engineers and Test Supervisors, • Help define test methods, procedures, and sequences for new or evolving assignments, • Provide technical guidance and support to department personnel as needed, • Cross-train in additional job functions to support team flexibility, • Coordinate work assignments with supervisors to ensure production and project schedules are metRequired Skills & Qualifications, • Strong troubleshooting skills at the circuit and component level, • Ability to read and interpret electrical schematics and wiring diagrams, • Experience using common lab equipment such as oscilloscopes, multimeters, and power supplies, • Familiarity with test equipment, test procedures, and basic test automation concepts, • Solid understanding of basic math, electronics, and engineering principles, • Strong documentation and communication skillsPreferred / Additional Qualifications, • Education:, • Associate degree in Electronics Technology, Electrical Engineering Technology, or related field, • OR Bachelor’s degree in Electrical Engineering (entry-level candidates welcome), • OR Equivalent hands-on experience (including aerospace or defense electronics), • Prior experience troubleshooting aerospace, military, or high-reliability electronics, • Exposure to hardware test plans and engineering documentation, • Basic CAD experience for creating simple drawings or test fixture layoutsWork Environment, • Primarily a bench / shop-floor technician environment with a strong team-oriented culture, • Some time spent in a cubicle setting on basic design support, documentation, or fixture drawings, • Exposure to a wide range of military, aerospace, and commercial electronic systems This is a Contract to Hire position based out of Bohemia, NY. Pay and Benefits The pay range for this position is $26.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Electrical Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This electrical engineering career opportunity is responsible for assisting in the design, wiring, testing and debugging complex, electro-mechanical, industrial x-ray integrated sources. Job Description: • Responsible for creating and maintaining Electrical Engineering Change Notices, • Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies used with x-ray applications, • Test, troubleshoot and debug electrical components and systems, • Analyze equipment to establish operating data and conduct experimental tests, • Works with technical personnel to ensure prototype models are assembled according to design specification, • Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards, • Generate, revise and finalize BOMs, • Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software) to generate and edit system electrical design documents, • Provide support to other departments in the creation of technical documentation, system manuals and customer facing documentation, • Create and maintain engineering reports, • Interact with other engineering disciplines, the sales and production teams on system designs and to help resolve customer problems and provide world class customer service, • Perform other duties as assigned by engineering team, • Follow all VJX and OSHA workplace safety requirements and policies, • Bachelor’s degree or higher in Electrical Engineering, • Internship or work experience in a manufacturing or environment, • Understanding of electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams, • Familiarity with soft switching techniques, schematics capture and PCB layout, • Prior soldering experience, • Proficiency in the English language with established written and verbal communication skills, • Excellent Microsoft Office Skills, • Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization, • Knowledge of CE, UL, or other applicable regulatory guidelines or standards, • X-ray component knowledge, • Regularly required to sit, walk, bend, stoop and stand within an industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone and via email and other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be requiredOn a regular basis, will be required to:, • Use written and oral communication skills, • Read and interpret data, information and documents, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

Job Description Job Summary The Design Engineer 3 is a senior level engineer who provides engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses broad knowledge of industry practices, standards, and technology areas. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Develops strategic and implementation plans. Essential Functions • Works on multiple highly complex major projects requiring innovative, original solutions, • May plan multiple projects simultaneously. Estimates, tracks & completes project on time and within budget., • Subject Matter Expert in at least one area or system., • Strong technical, proposal and report writing skills with ability to collect or generate all necessary backup material., • Exercises considerable latitude and technical judgment in deciding work methods., • Can lead a group of engineers and technicians, responsible for budget and manpower estimates., • Develops innovative solutions to unique problems., • Works mostly independently with minimal supervision., • Exercises substantial initiative/ judgment in work methods and in interpreting goals., • Able to give effective presentations to critical/high level customers., • Knowledgeable in all technical areas of the group's scope or having a demonstrated ability to achieve that level of proficiency in a short period of time., • Responsible for large and fairly complex projects., • Ability to work well with and mentor both high and low performers in a team or group environment, setting expectations, and providing input and feedback in a helpful way that fosters accountability. Ability to deal with personnel problems in a constructive manner., • Proven leadership skills. Identifies problems and actively devises appropriate solutions., • U.S. Citizenship Required., • BSME or equivalent educational degree required., • Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred., • Strong knowledge of AS9100 and ISO requirements., • Ability to read, write, and speak in English proficiently., • Strong work ethic; can work independently or in a group., • Highly professional with excellent telephone etiquette., • Medical Dental, Vision,, • Life Insurance, Long-Term Disability, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD), • PTO (3 weeks accrued first year!), • 10 Paid Holidays, • Flexible Spending Accounts, • 401(k) with matching, • Pet Insurance Reports To: Engineering Manager FLSA Classification: Exempt Job Type: Full time EOE/Disability/Veteran EAST/WEST INDUSTRIES INC. is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Job Description High Voltage Electrical Engineer VJ X-Ray LLC (VJX) is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. A High Voltage Electrical Engineer at VJX is engaged in technical projects that include design, assembling, wiring, testing and troubleshooting complex, electro-mechanical, integrated x-ray sources and high voltage generators. Job Description: • Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies for x-ray applications, • Test, troubleshoot and debug electrical components and systems, • Regularly work with power output up to 450 kV and up to 6kW, • Work on multiple projects varying in complexity from inception to completion, • Analyze equipment to establish operating data and conduct experimental tests, • Works with technical personnel to ensure prototype models are assembled according to design specification, • Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards, • Generate, revise or finalize BOMs, • Create and maintain engineering reports, • Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software and special projects) on system designs and to help resolve customer issues and provide world class customer service, • Participation in the creation of technical documentation, system manuals and customer facing documentation, • Follow all VJX and OSHA workplace safety requirements and policies, • Bachelor’s Degree in Electrical Engineering, • Minimum of 3 years of experience in a manufacturing environment, • Strong working knowledge of power supplies, electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams, • Knowledge of analog circuit design, • Familiarity with soft switching techniques, schematics capture and PCB layout, • Ability to solve complex technical problems with minimal supervision, • Experience with a variety of testing equipment including but not limited to Oscilloscopes and Multimeters, • Proficient soldering skills, • Proficiency in the English language with established written and verbal communication skills, • Ability to effectively communicate with all levels of staff and customers to influence, train and negotiate simple to complex topics, • Proficiency in Outlook, Microsoft Word, Excel and PowerPoint, • Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization, • Must be legally authorized to work in the US, • Knowledge of CE, UL, or other applicable regulatory guidelines or standards, • Basic understanding of an ERP system, • Regularly required to sit, walk, bend, stoop and stand in a manufacturing environment, • Will be required to lift, move, erect, install and assemble components of varying weight, height, length and width dimensions, • Day to day responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on phone, and via email or other electronic devices on a continual and repetitive basis, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job function in a consistent state of alertness and safe manner, • Use written and oral communication skills, • Read and interpret data, information and documents, • Analyze and solve non-routine and complex problems, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals. This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type is not tolerated.

Job Description Mechanical Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This role is responsible for documenting and supporting the research, design, development and diagnosis integrated x-ray sources and high voltage generators within a manufacturing environment. Job Description: • Responsible for creating and maintaining Mechanical Engineering Change Notices, • Create and modify concept drawings, detailed design, assembly and fabrication drawings; BOMs and other related design documentation, • Work with cross-functional team to design and develop new products and improve existing designs, • Generate 2D and 3D designs using SolidWorks, • Create and properly document detailed drawings complying with metric standards, • Create, maintain and share process documentation in ERP system and SharePoint, • Regular communication with other engineering disciplines, the sales and production teams, • Follow all VJX and OSHA workplace safety requirements and policies, • Bachelor’s Degree or higher in Mechanical Engineering, • One internship or limited experience in a manufacturing environment, • Familiarity with manufacturing processes and mechanical components, • Proficiency in reading and interpreting detailed mechanical drawings, • Superior written and verbal communication skills, • Must be a highly organized, self-motivated, team player, • Demonstrated working knowledge of SolidWorks or similar software, • Proficient in Microsoft Office Suite, • Experience in electro-mechanical design, • Minimum 2 years of mechanical design experience, • Experience working with ERP systems, • Regularly required to sit, walk, bend, stoop and stand within an industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and possibly operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone, via email and on other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required.On a regular basis, will be required to:, • Use written and oral communication skills, • Read and interpret data, information and documents, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels

Job Description Embedded Software Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This role is responsible for developing optimized software to support the prototypes of integrated x-ray sources and high voltage generators. Job Description • Design and create requirement specifications for the Microcontrollers to be used in High Voltage power supply designs, • Test units, integration of firmware and GUI (Graphical User Interface) changes, • Maintain Software Version Control (SVN) and release management systems, • Provide documentation for third party integration into the firmware and customer support to debug software issues, • Program Data Acquisition based GUI’s using serial communication (RS232) and Ethernet Communication (TCP/IP) protocols, • Work with cross-functional team to design and develop new products and improve existing designs, • Follow all VJX and OSHA workplace safety requirements and policies, • Bachelor’s Degree in Electrical and/or Computer Engineering, • Minimum of two (2) years of experience with NI, LabVIEW, Microsoft Visual Studio C++/VB/C#, Embedded C and RTOS, • 2-3 years of experience with Freescale products (MC56F8037 7 ARM) microcontrollers, • Demonstrated ability to write firmware for industrial control equipment, • Ability to work with Analog and Digital Circuits based PCB designs like Op Amps, ADC, DAC & multi-functional IC’s, • Knowledge of RS-232 and TCP/IP communication standards, • Proficient in Microsoft Office Suite, • Perform software development and version control adhering to SCRUM standard, • Proficiency in the English language with well-established written and verbal communication skills, • Must be a highly organized, self-motivated, team player, • Collaboration and creative thinking skills, • Knowledge of radiographic imaging systems for industrial and medical inspection, • Strong background in understanding x-ray tube design of high voltage generators to power up X-ray sources, • Regularly required to sit, walk, bend, stoop and stand within an office or industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and possibly operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone, via email and on other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • Use written and oral communication skills, • Read and interpret data, information and documents, • Be creative, make judgements, use reasoning and make decisions, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

Looking for a lifetime career? Apply today! Job Description The Knolls Laboratory Weight Handling Engineering unit is seeking a Mechanical Engineer to join our Team! This role provides engineering support for maintenance and inspection of cranes, rigging equipment, and other weight handling equipmen

Position Summary: Production assembler in a fast-paced, high-volume environment.Must be able to reliably follow directions producing high-quality mechanical and/or electrical assemblies.Shifts Available: 1 st Shift 6:00 am – 2:45 pm , 2nd SHIFT: 2:15pm-11pm Salary: $18-$25 per hour depending on sk

PrideStaff - - Responsibilities: Operate forklift safely and efficiently (required); Load, unload, move, and stage materials; Perform general warehouse duties including picking, packing, and organizing inventory; Assist with shipping/receiving as needed; Maintain a clean and safe work environment.

National Church Residences - - Responsibilities: Perform routine inspections, preventive maintenance, and necessary repairs; Diagnose and repair HVAC, plumbing, electrical, and mechanical system issues; Maintain interior and exterior common areas, ensuring safety and cleanliness; Complete minor car

Crestline Hotels and Resorts - - Responsibilities: Maintain timelines and work schedule in accordance with the preventive maintenance program; Check work orders and night report for any assignment to be completed; Perform preventive maintenance work orders; Monitor and maintain all laundry and kitc

Nesco Resource - - Responsibilities: Lead the Facility Maintenance team and perform preventive maintenance on electromechanical systems.

Aerotek - - Responsibilities: Operate a forklift safely to load, unload, and transport materials throughout the warehouse; Assemble pallet-sized boxes and liners used to store totes for international shipping; Wrap pallets by hand and using pallet wrapping equipment to secure products for transport

Island Hospitality Management - - Responsibilities: Perform routine and preventative maintenance on resort facilities; Complete minor repairs to rental homes and facilities; Inspect irrigation systems, playgrounds, pool/spa, and recreational amenities; Maintain resort pool(s) and test chemical leve

FedEx - 140 Comac Street - Responsibilities: Provide timely, quality maintenance for FedEx vehicle fleet and ground support equipment; Perform preventative maintenance, troubleshooting, repairs, modifications; Document work with repair orders and parts ordering using FedEx computer systems; Ensure w

Crestline Hotels & Resorts - JobID: J5208faa3f5fb4b59ab016df471a3e52a-1 [Maintenance Mechanic] As a Maintenance Technician at Crestline Hotels & Resorts, you'll: Perform routine maintenance tasks to ensure the efficient operation of hotel facilities; Oversee and repair electrical, plumbing, and HVAC

Waste Connections - - Responsibilities: Operating heavy equipment such as bulldozers, wheel loaders, motor grader, scraper, and compactors; Performing routine inspection and maintenance on equipment; Promoting continuous improvement of workplace safety and environmental practices; Interacting with

Thermo Fisher Scientific - 2800 Veterans Memorial Highway - Responsibilities: Operate and maintain equipment used in production of clinical trial labels; Set up and run production using CLPS software; Monitor label production for accuracy and completeness; Perform preventative maintenance and cleani

Thermo Fisher Scientific - 2800 Veterans Memorial Highway - Responsibilities: Operate, maintain, and troubleshoot folder-gluer and related manufacturing equipment; Perform preventive maintenance, minor repairs, and equipment adjustments to ensure optimal performance; Monitor production quality and c

Generac - - Responsibilities: Provide on-site troubleshooting and repair of Generac industrial products; Perform preventative maintenance and warranty/campaign service; Equipment modifications; Load bank loading and towing and related certifications as required for larger units; Work with minimal s

Focus Workforce Management - - Responsibilities: Picking, packing, warehousing, and shipping product or merchandise; Maintain facility cleanliness; Follow all safety procedures; Communicate effectively; Stand/walk for long periods of time.

International Recycling Company, is looking to hire full time warehouse employees in Farmington, NY.Our warehouse associates play a critical role in meeting our daily business demands.Warehouse associates are responsible for unloading trailers, processing the used beverage containers, and reloading

Use or wear safety equipment and personal protective equipment required by the company. Report to supervisor any hazardous or unsafe conditions, absence or defects in equipment and any contravention of health and safety legislation.

Adecco is hiring for Assembly Technicians in Clifton Springs, NY.This temp-to-hire position is a great opportunity to join a dynamic and innovative manufacturing company committed to delivering high-quality products.If you are a skilled and motivated individual looking to contribute to this growing

Adecco is hiring for Assembly Technicians in Clifton Springs, NY.This temp-to-hire position is a great opportunity to join a dynamic and innovative manufacturing company committed to delivering high-quality products.If you are a skilled and motivated individual looking to contribute to this growing

Adecco is seeking determined and qualified Assemblers for a manufacturing client in and around Newark, NY.This temp-to-hire position is a great opportunity to join a dynamic and innovative manufacturing company committed to delivering high-quality products.If you are a skilled and motivated individu

The ideal candidate must hold a degree in engineering, architecture, construction management, or a related field, complemented by extensive hands-on experience in high-end residential construction and estate management. Lead all phases of renovation and construction projects, including conceptual de

Are you a hands-on Project Manager who thrives in a custom-engineered environment? Our client, a growing leader in the industrial equipment space, is looking for a. Proven project management experience specifically within a manufacturing or "engineered-to-order" environment. Ability to rea

We are looking for experienced landscape and/or irrigation installers who are looking for a change to join our landscape lighting team.The work is outdoors so you can still enjoy working outside and utilizing your skills while taking on a lighter task of installing landscape lighting and wiring.Work

Bachelor's degree in Operations, Engineering, Supply Chain, or related field.

This includes managing timelines, budgets, resources, and teams across departments such as engineering, production, and quality control. Collaborate with cross-functional teams including engineering, production, and quality control to ensure alignment on project goals and priorities.

Walmart Stores | Medical, Dental, Vision, Rx + 401(k) with match + PTO + 100% Reimbursement of Tuition & Books | 901 Meadows Boulevard East | Responsibilities: Maintain and repair Walmart facilities, equipment, and assets using multiple craft skills (for example, plumbing, electrical, carpentry, mat

Adecco is hiring for Assembly Technicians in Clifton Springs, NY.This temp-to-hire position is a great opportunity to join a dynamic and innovative manufacturing company committed to delivering high-quality products.If you are a skilled and motivated individual looking to contribute to this growing

The Heavy Equipment Operator ensures the safe operation of heavy equipment at the Transfer Station for the purpose of transferring and loading materials in an efficient and safe manner; operates one or more types of yellow iron equipment. Demonstrates the ability to safely operate two types of yello

Use or wear safety equipment and personal protective equipment required by the company. Report to supervisor any hazardous or unsafe conditions, absence or defects in equipment and any contravention of health and safety legislation.