Fiber optic jobs in Seattle, WashingtonCreate job alerts

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! As a Senior Photonics System Engineer, you will own the end-to-end modem photonics architecture for a state-of-the-art space laser communication terminal. You will define and integrate the full optical chain-including seed and LO lasers, modulators, optical amplifiers, filters, polarization control, and receivers-to deliver high-reliability, high-throughput optical links for a growing range of customer missions. Your technical leadership will set the standard for capability, manufacturability, and on-orbit performance. Special Mentions: * Relocation assistance may be available for this position. * Travel expectations: Occasional travel may be required for technical reviews and supplier visits. Responsibilities include but are not limited to: System Architecture & Design * Define requirements, own optical link budgets and conduct architecture trade studies for space laser communication modem photonics. * Architect and select narrow-linewidth lasers, electro-optic modulators and bias control, optical amplifiers, optical filters/WDM, polarization management, isolators, and coherent/Direct-Detect receiver front-ends. * Allocate optical, electrical, thermal, and radiation margins; define interfaces to DSP/modem electronics, drivers/TIAs, power, and thermal/mechanical teams. * Lead make/buy decisions and guide supplier selection, qualification, and performance management for critical photonic components. * Establish redundancy and reliability strategies appropriate for spaceflight. Development, Integration & Test * Lead breadboard and brassboard development to de-risk architecture choices and mature to flight design. * Define and execute verification and validation plans, including optical performance (OSNR, linewidth, RIN, extinction ratio, EVM/BER), stability, and latency. * Analyze test data to characterize impairments (e.g., phase noise, SBS/thermal effects) and drive corrective actions. * Validate system performance through environmental test (TVAC, vibration, shock, and radiation considerations) and ensure compliance to requirements. * Maintain rigorous documentation of requirements, designs, ICDs, procedures, and results; contribute to FMEAs and design reviews. * Collaborate closely with cross-functional teams (DSP/software, RF/electronics, optics, manufacturing, quality, and supply chain) to achieve design-for-manufacture and design-for-test. Minimum Qualifications: * Minimum of 7 years of experience in engineering roles supporting complex systems such as lasers, optics, electronics, or aerospace hardware, with at least 3 years in lead/architect roles. * Demonstrated experience with photonics systems involving fiber-based electrooptic modulators and optical receivers. * In-depth knowledge of lasers and photonics (e.g., narrow-linewidth lasers, photodiodes, nonlinear optics, fiber components/assembly, and laser system fabrication). * Experience developing functional specifications, verification plans, and functional test procedures for optical communication systems. * Proficiency in system characterization, environmental testing, and data analysis for photonic subsystems. * Ability to communicate complex technical information to broad audiences and collaborate across disciplines to drive decisions. * Hands-on experience with test frameworks and analysis tools (e.g., MATLAB and/or Python; familiarity with LabVIEW). Experience with optical system simulation tools (e.g., VPIphotonics, OptiSystem, or similar) is a plus. * MS degree in Optical Engineering, Physics, Optics/Optical Sciences, or a related field; OR equivalent work experience. Preferred Qualifications: * 10+ years of experience in lasers/optics/electronics/aerospace hardware with 5+ years in lead architect roles * Expertise in high data rate optical communications, including advanced modulation, DSP interfaces, and coherent reception techniques. * Direct experience deploying systems in spaceflight environments and qualifying photonic hardware for launch and on-orbit operation. * Experience with Design for Manufacturing/Assembly (DFM/DFA), fiber handling/assembly, contamination control, and process improvement in production environments. * PhD in Optical Engineering, Electrical Engineering, Physics, Optics/Optical Sciences, or a related field. Compensation Range for: CA applicants is $156,802.00 - $219,522.45 WA applicants is $156,802.00 - $219,522.45 Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request. California Applicant Privacy Notice If you are a California resident, please reference the CA Applicant Privacy Notice ___.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! The Emerging Systems business unit at Blue Origin is pioneering the future of space-based communications with TeraWave, a revolutionary satellite communications network designed to deliver symmetrical data speeds of up to 6 Tbps anywhere on Earth. This multi-orbit constellation will consist of 5,408 optically interconnected satellites in low Earth orbit (LEO) and medium Earth orbit (MEO), providing enterprise-grade connectivity for critical operations worldwide. We are seeking a Lead Optical Systems Architect to join our Optical Ground Terminal team. You will shape the future of laser communication systems from concept through operational activities. This role encompasses the comprehensive development of the product line, frominitialprototyping to production, ensuring technical rigor and operational success. Your leadership will set the standard for new capabilities and a growing range of customer missions. Special Mentions: * Relocationassistancemay be available for thisposition * Travel expectations: Up to 20% travel may berequiredfor field testing, customer meetings, and technicalreviews Responsibilities include but are not limited to: Optical System Architecture & Design * Lead the architectural design and technical direction for ground optical communications systems incorporating: * Large telescope and gimbal assemblies, including telescopearrays * High-power and low-noise optical fiber amplifiers * Pointing, acquisition, and tracking systems * Adaptive optics systems * Conduct trade studies between different optical architectures andconfigurations * Lead optical system modeling, analysis, and performance simulation including tolerance and stray lightanalysis * Collaborate with team membersregardingthe end-to-end characterization, modeling, and mitigation of atmospheric turbulence for high-bandwidth laser communication systems, from system architecture and algorithm development to integration and fieldtesting Technical Leadership & Integration * Contribute to technology roadmap planning and provide technical oversight for subsystem development andintegration * Collaborate with mechanical, electrical, software, and thermal engineers on interdisciplinary designchallenges * Develop system requirements, specifications, performance budgets, error budgets, and interface control documents that balance performance, cost, andschedule * DevelopConOps, calibration/alignment procedures and commissioningplans * Play a meaningful role in design for assembly andmanufacturability * Collaborate to develop automation strategies for optical system alignment, calibration, and operationalprocedures Minimum Qualifications: * MS or PhD in Optical Engineering, Physics, or related field * 10+ years of experience in optical systems engineering with progressive responsibilities * Demonstratedexpertisein free-space optical communication groundsystems * Proficiencywith optical system design tools (Zemax, Code V, etc.) * Experience with large-aperture telescope systems and pointingrequirements * Advanced knowledge of mode-matching techniques and optimization of free-space to/from single-mode fiber coupling efficiency * Previousexperience in adaptive optics, wavefront sensing, and wavefront correction techniques * Knowledgeable regarding atmospheric absorption and scattering impacts on optical space-to-ground and ground-to-space links * Familiarity with fiber optic coupling challenges and solutions * Previousexperience with infrared cameras and sensors for tracking * Experience developing or managing integrated performance of optical systems including understanding of optical loss and throughput budgets, wavefront error, Structural-Thermal-Optical Performance (STOP) analysis, and precisionpointing * Experience collaborating with cross-functionalteams Preferred Qualifications: * 15+ years of experience in optical systems engineering with progressive leadership responsibility * Previouswork with space-to-ground optical communications links * Proventrack recordas a lead engineer on similar programs * Experience with at least oneadditionalindustry-standard mechanical CAD platform (SolidWorks, CREO, etc.) * Experience with atmospheric optical turbulence theory andcompensation * Provenexpertisein atmospheric optics and hands-on experience implementing adaptive optics (AO) control systems to correct forturbulence * Experience taking a complete laser communication system from lab to field, including link performance analysis and hardwarevalidation * Understanding of fundamental physics and operation of optical amplifier technologies (EDFA, EYDFA, Raman, etc.) * Knowledge of advanced and camera-free adaptive optics systems for optical communications such as multi-plane light conversion and photonic lantern techniques * Strong background in coherent optical communications principles * Experience with optical metrology and testing of complexsystems * In-depthexpertiseand publications regarding atmospheric absorption and scattering impacts on optical space-to-ground and ground-to-space links * Previousexperience with anti-reflective and band pass filter dielectric optical coatings * Experience in high power fiber lasers and thermallensing * Program management experience for large optical systemdevelopment Why Blue Origin: At Blue Origin, we are driven by our company motto, GradatimFerociter, meaning "Step by Step,Ferociously." We believe that humanity's future is in space, andwe'recommitted to developing the technologies that will make that vision a reality. As a Senior Optical Systems Design Engineer,you'llplay a crucial role in developing the advanced laser communication systems that will enable high-speed data transfer between Earth and space, directly contributing to our mission of building a road to space for the benefit of Earth. This position is critical to the success of our optical ground station development, requiring a candidate who can balance theoretical optical principles with practical engineering implementation and system integration challenges. We are building a team of passionate builders. Job descriptions are not perfect checklists. If you are excited about this mission but your experiencedoesn'talign perfectly with every qualification, we encourage you to apply. You may be the right candidate for this or other roles. Compensation Range for: CA applicants is $145,188.00 - $203,263.20 WA applicants is $145,188.00 - $203,263.20 Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request. California Applicant Privacy Notice If you are a California resident, please reference the CA Applicant Privacy Notice ___.

Job Description Job Title: Fielder I, II, III Department: Engineering Reports To: Fielding Manager Employment Status: Full-time, Non-Exempt (hourly) Primary Location: Seattle, Washington Terra, a Congruex Company, is looking for Fielder to join our team. Learn more about our operating unit at: Who is Congruex Congruex designs and builds broadband and wireless communications infrastructure. The work we do enables everything in the modern world to operate, from healthcare and energy to transportation and social interactions. We deliver turn-key network solutions under a single platform by aligning our engineering and in-market construction operating units. Our vision is to be the best end-to-end provider of network services in the U.S. and our core values of GRIT connect everything we do. We are building tomorrow, together. Will you join us? Your New Job Job Summary: Fielders report field conditions for design engineers to accurately design the network. Responsible for aerial and underground data collection while validating a viable cost-effective path for engineering. Fielders may be assigned to perform field inspections of cable/fiber placement, splicing, and construction work on job sites after completion. The majority of fieldwork is conducted outdoors along public right of way, utility easements, and private property. Job Responsibilities (Including, but not limited to): · Collect relevant pole information and accurately document existing measurements and placement · Utility pole identification, inspection, and classification · Gather aerial attachment heights and clearances, checking for violations · Determine ideal locations for new above ground facilities and equipment · Conduct Underground/Buried Cable layout surveys · Develop accurate fiber/optical network construction surveys · Determine existing and new locations for fiber optic cables · Inspect the work of construction contractors · Accurately depict new construction route opportunities · Assure that personal vehicle and tools are maintained to company safety standards · Responsible for always conducting job in safe manner · Take pictures of job sites, pole conditions and other relevant structures or landmarks · Make hand drawn sketches of recommended engineering design while in the field or facility · Upload clear images, files, hand notes, and sketches, and edit for quality and cohesiveness · Make decisions taking into consideration value engineering and the impact on construction, installation and future maintenance · Open hand holes to inspect facilities (substructure conditions, fiber placement, and condition) · Inspect fiber optic cables and the work of construction contractors. · Assist with data preparation and documentation of reporting field results. · Attend field meetings with client’s field personnel as well as government agencies and construction contractors. · Operate and maintain field equipment and tools such as laptop, iPad, height stick, camera, personal protective equipment (PPE), etc. · Daily travel to job site(s) using company or personal vehicle · At times, may be required to interface with customers/landowners · Occasional extended travel out of assigned market may be requested Required Skills & Qualifications: General · High school diploma or GED equivalent · Valid driver’s license; satisfactory driving record · Highly organized, self-starter, and detail oriented · Excellent verbal and written interpersonal communication skills · Superior time management skills · Strong attention to detail · Ability to be flexible, take direction with ease, including changes to schedule and workflow priorities · Critical thinking skills; make assessments and provide solutions to problems · Ability to follow direction in maintaining all Field Safety standards · Physical requirements: · Ability to stand, stoop, squat and bend for extended periods of time · Ability to look up for extended periods of time · Ability to walk for extended periods of time and/or long distances · Ability to navigate through potential uneven walkways/terrain · Tolerant to extreme elements (heat, sun, wind, rain, snow, etc.) · Good vision and depth perception (corrective lenses OK) · Ability to sit and drive for extended periods of time · Ability to lift 10lbs minimum, and potentially up to 50lbs Technical · Proficiency in Microsoft Office programs, Adobe Acrobat, and Google Earth · Ability to upload/download and edit documents in Project Management software · Ability to quickly learn new systems and databases Desired Skills & Qualifications: · Comprehensive understanding of telecommunications design and the ability to support engineering · Basic Knowledge of Make-Ready Construction · Knowledge and experience with telecommunications engineering standards and construction techniques · Associate or bachelor’s degree in science, Technology, Engineering or Mathematics is a plus · Experience in either the engineering, construction, architecture or telecommunications industries is a plus Why Work At Congruex No matter what role you play, you are an important part of the One Congruex Family. We offer: · Medical, Dental & Vision Benefits · 401(k) Program with a Company Match. · Free Wellness Resources & Marketplace Discounts · Paid Maternity & Parental Leave · Paid Basic Life Insurance & Voluntary Options · The pillars of Congruex culture are GRIT, safety, inclusion, and family. The Fine Print: We will determine salary based on skills and experience in relation to the function of the role, as well as equity to employees in similar roles. Some benefits have eligibility criteria. All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.

Job Description Position Title: Director, Outside Plant & Engineering Base Salary: $145,000 to $190,116 annually DOE Bonus: Target annual bonus Benefits: Medical, dental, vision, 401k, flexible spending account, paid sick leave and paid time off, parental leave, quarterly performance bonus, training, career growth and education reimbursement programs. Ziply Fiber is a local internet service provider dedicated to elevating the connected lives of the communities we serve. We offer the fastest home internet in the nation, a refreshingly great customer experience, and affordable plans that put customers in charge. As our state-of-the-art fiber network expands, so does our need for team members who can help us grow and realize our goals. Our Company Values: • Genuinely Caring: We treat customers and colleagues like neighbors, with empathy and full attention., • Empowering You: We help customers choose what is best for them, and we support employees in implementing new ideas and solutions., • Innovation and Improvement: We constantly seek ways to improve how we serve customers and each other., • Earning Your Trust: We build trust through clear, honest, human communication. Job Summary The Director of Outside Plant & Engineering leads teams responsible for designing and building scalable, cost-effective fiber networks, ensuring all designs meet technical and regulatory standards. This role oversees the entire engineering design process, manages internal teams and external partners, and drives innovation and operational excellence. The Director is accountable for delivering high-quality, construction-ready designs and maintaining accurate OSP records to support Ziply Fiber’s mission of expanding state-of-the-art fiber networks. Strategic leadership, vendor management, and expertise in fiber network engineering are essential for enabling large-scale deployment and long-term network sustainability The position is to be in either Kirkland, Washington or Everett, Washington. Essential Duties and Responsibilities: The Essential Duties and Responsibilities listed below are a range of duties performed by the employee and not intended to reflect all duties performed. Program Management & Strategic Planning · Provide the end-to-end program direction to organize, develop, and execute a program build across multiple functional teams. · Develop and execute the fiber engineering design strategy in alignment with business expansion and network deployment goals. · Provide input into long-term network strategy, capacity planning, and emerging technology adoption. · Support market analysis diligence required for expansion initiatives. Engineering Design, Standards & Compliance · Oversee end-to-end design processes, including route planning, permitting, and compliance with federal, state, and local regulations. · Ensure designs are optimized for scalability, cost efficiency, constructability, and long-term maintainability. · Establish and enforce engineering design standards, documentation practices, and quality control measures, and oversee adherence to industry best practices and evolving standards in fiber network engineering. · Ensure engineering work orders are designed in compliance with all company standards, NESC, Utility Pole Agreements, and municipal requirements, as well as public ROW or utility easements, and ensure compliance with permitting requirements, safety standards, and environmental regulations. Mitigate risks by proactively identifying engineering challenges and implementing solutions. Team Leadership, Vendors & Cross-Functional Collaboration · Lead and mentor a team of engineering managers, designers, and support staff to deliver high-quality network designs on schedule. · Manage relationships with external engineering vendors, contractors, and consultants, ensuring alignment with company standards and project timelines. · Foster a culture of accountability, collaboration, and continuous improvement within the engineering organization. · Partner with construction, operations, product, and finance teams to align engineering design with deployment readiness and business objectives. Innovation, Tools & Performance · Drive innovation in design methodologies, leveraging automation, GIS platforms, and advanced engineering tools, and implement best-in-class workflows to improve speed, accuracy, and efficiency of design deliverables. Establish and manage process indicators and performance metrics to optimize workflows. · Stay ahead of industry trends, technologies, and regulatory developments to maintain competitive advantage. Administrative & Travel · Occasional travel for activities such as out-of-town meetings, training, or outreach activities up to 10% of the time. Other Duties · Performs other duties as required to support the business and evolving organization. Required Qualifications: · Bachelor’s degree in Engineering, Telecommunications, or related field. · Minimum ten (10) years of progressive experience in fiber network engineering. · Minimum of five (5) years in a leadership/people management capacity, with demonstrated experience mentoring, developing, and managing engineering teams. · Proven expertise in large-scale fiber design, route and build planning, permitting, and construction-ready deliverables. · Strong understanding of GIS applications, CAD tools, asset management systems, and engineering workflows. · Experience managing internal teams and third-party engineering vendors. · Developed leadership skills, with the ability to mentor and lead others. · Knowledge of permitting processes, regulatory requirements, and compliance for fiber deployments. · Ability to lead cross-functional initiatives and communicate effectively with executive leadership. · Experience using fiber optic network documentation tools. · Understanding of network Engineering and inventory tools · Ability to travel occasionally (up to 10% of the time). · The schedule for this position is Monday through Friday with weekend availability as needed to complete the essential duties of this role. · Must have and maintain a valid driver’s license, auto insurance, and satisfactory driving record. Preferred Qualifications: · Master’s degree in Engineering, Telecommunications, or related field. · Professional Engineer (PE) license. · Experience managing capital budgets. Knowledge, Skills, and Abilities: • Ability to work independently and apply sound judgment and reasoning skills to a variety of situations., • Ability to collaborate effectively with other personnel to meet deadlines., • Strong verbal and written communication, attention to detail, and organizational skills., • Operate from a customer centered mindset, • Ability to lead and guide change within an organization, • Ability to work within critical deadlines., • Ability to adjust to rapidly changing priorities and schedules., • Ability to provide excellent customer service. Work Authorization Applicants must be currently authorized to work in the US for any employer. Sponsorship is not available for this position. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking, or standing for prolonged periods of time; most of time is spent sitting in a comfortable position with frequent opportunity to move about. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment Work is performed in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse, and multi-line telephone system. The work is primarily a modern office setting. At all times, Ziply Fiber must be your primary employer. Unless otherwise prohibited by law, employees may not hold outside employment nor be self-employed without obtaining approval in writing from Ziply Fiber. In holding outside employment or self-employment, employees should ensure that participation does not conflict with responsibilities to Ziply Fiber or its business interests. Diverse Workforce / EEO: Ziply Fiber is an equal opportunity employer. Ziply Fiber will consider all qualified candidates regardless of race, color, religion, national origin, gender, age, marital status, sexual orientation, veteran status, and the presence of a non-job-related handicap or disability or any other legally protected status. Ziply Fiber requires a pre-employment background check as conditions of employment. Ziply Fiber may require a pre-employment drug screening. Ziply Fiber is a drug free workplace.

Job Description This is a remote position. Position Title: Director, Network Automation Base Salary: $165,000 to $195,000 annually DOE Bonus: Target annual bonus Benefits: Medical, dental, vision, 401k, flexible spending account, paid sick leave and paid time off, parental leave, quarterly performance bonus, training, career growth and education reimbursement programs. Ziply Fiber is a local internet service provider dedicated to elevating the connected lives of the communities we serve. We offer the fastest home internet in the nation, a refreshingly great customer experience, and affordable plans that put customers in charge. As our state-of-the-art fiber network expands, so does our need for team members who can help us grow and realize our goals. Our Company Values: • Genuinely Caring: We treat customers and colleagues like neighbors, with empathy and full attention., • Empowering You: We help customers choose what is best for them, and we support employees in implementing new ideas and solutions., • Innovation and Improvement: We constantly seek ways to improve how we serve customers and each other., • Earning Your Trust: We build trust through clear, honest, human communication. Job Summary The Director of Network Automation leads the architecture and development of Ziply Fiber’s provisioning automation, orchestration systems, and workflow tooling. This role is critical for streamlining operations through API layers and automated monitoring across our fiber-optic broadband network. The ideal candidate will combine deep technical expertise with leadership skills to drive innovation in automation and AI-driven network operations. Essential Duties and Responsibilities: The Essential Duties and Responsibilities listed below are a range of duties performed by the employee and not intended to reflect all duties performed. Network Provisioning & Service Integration · Lead Productized Automation: Drive the development of robust, scalable software solutions for BNG provisioning, Radius workflows, and DHCP/IP management. · Own the end-to-end development of integration layers for ONT/RG provisioning and Hosted Voice workflows (Metaswitch, CXP, Talc). Tools & Infrastructure Automation · Establish coding standards, peer review processes, and CI/CD maturity for all network logic, utilizing Python, Ansible, Salt, and Terraform. · Automated Environments: Oversee the development of “Infrastructure as Code” pipelines for hardened Linux images, MAAS provisioning, and virtualized environments (Proxmox/OpenStack). Data Systems & Governance · Manage the development of NetBox plugins and custom API frameworks, ensuring data integrity during the migration of legacy systems into modern service-oriented architectures. Engineering Culture · Direct and mentor a team of DevOps and automation engineers, fostering a culture of “Network as Code” and professional software engineering discipline. AI‑Driven Network Operations · Architect and deploy AI Agents capable of autonomously executing complex provisioning tasks across BNG, Radius, and Voice systems (Metaswitch/CXP), moving beyond simple linear scripts. · Closed‑Loop Reliability: Direct the creation of self‑healing network modules where AI‑driven logic identifies degradation and executes autonomous remediation. · Build intelligent provisioning models that utilize historical data to optimize IP allocation and network capacity. · Oversee the integration of LLM‑based interfaces into internal tooling (NetBox, etc.), allowing teams to interact with network state via natural language. Other Duties · Performs other duties as required to support the business and evolving organization. Required Qualifications: · Bachelor’s degree in Computer Science, Electrical Engineering, Network Engineering, Information Systems, or a related technical field. · Minimum of eight (8) years’ experience software development, DevOps, or network automation. · Minimum of three (3) years’ experience in a formal engineering management or director-level role. · A track record of shipping production-grade software and managing the long-term maintenance of internal platforms. Expert-level understanding of Linux systems, Kubernetes, Helm, Kafka, and the Python ecosystem. Preferred Qualifications: · Experience with Django/FastAPI for building internal service portals. · Deep familiarity with API design (REST/gRPC) and specialized image pipelines (MAAS). · Background in Telecom or ISP environments, specifically regarding BNG and Voice integration. Knowledge, Skills, and Abilities: · Ability to work independently and apply sound judgment and reasoning skills to a variety of situations. · Ability to multi-task and collaborate effectively with other personnel to meet deadlines. · Strong verbal and written communication, attention to detail, and organizational skills. · Ability to work within critical deadlines. · Ability to adjust to rapidly changing priorities and schedules. · Ability to provide excellent customer service. Work Authorization Applicants must be currently authorized to work in the US for any employer. Sponsorship is not available for this position. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking, or standing for prolonged periods of time; most of time is spent sitting in a comfortable position with frequent opportunity to move about. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment Work is performed in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse, and multi-line telephone system. The work is primarily a modern office setting. At all times, Ziply Fiber must be your primary employer. Unless otherwise prohibited by law, employees may not hold outside employment nor be self-employed without obtaining approval in writing from Ziply Fiber. In holding outside employment or self-employment, employees should ensure that participation does not conflict with responsibilities to Ziply Fiber or its business interests. Diverse Workforce / EEO: Ziply Fiber is an equal opportunity employer. Ziply Fiber will consider all qualified candidates regardless of race, color, religion, national origin, gender, age, marital status, sexual orientation, veteran status, and the presence of a non-job-related handicap or disability or any other legally protected status. Ziply Fiber requires a pre-employment background check as conditions of employment. Ziply Fiber may require a pre-employment drug screening. Ziply Fiber is a drug free workplace.

Job Description Pay: $22-$30 per hour based on experience Overview: The Archetype Strategy is seeking a detail-oriented and skilled Data Center Technician to join our team. In this role, you will be responsible for the critical infrastructure setup within data centers, including installing data cabinets, supporting pathways such as basket trays, and running pre-connectorized fiber. You will play a key part in ensuring that our data centers operate efficiently, reliably, and securely. Key Responsibilities: • Data Cabinet Installation: Install and align data cabinets and racks according to technical specifications and project requirements., • Pathway Support Setup: Design and install pathway support systems, such as basket trays and cable management solutions, ensuring optimal organization and efficiency., • Fiber Optic Installation: Run, terminate, and secure pre-connectorized fiber cables, ensuring accuracy and reliability in data transmission., • System Integration: Collaborate with engineering teams to ensure seamless integration of infrastructure with existing systems., • Quality Assurance: Conduct testing and inspections to ensure installations meet industry standards and company guidelines., • Documentation: Maintain detailed records of installations, configurations, and modifications within the data center., • Demonstrated experience in data center installation or a related technical field., • Expertise in installing data cabinets, rack systems, and supporting infrastructure such as basket trays., • Hands-on experience with pre-connectorized fiber cable installation and management., • Familiarity with data center standards such as TIA/EIA-942 and BICSI guidelines., • Strong ability to read and interpret technical diagrams, blueprints, and layouts., • Relevant certifications such as BICSI Technician, RCDD, or Fiber Optic Technician., • Experience working within operational data centers., • Capability to lift and handle equipment weighing up to 50 pounds., • Ability to work in confined spaces or at heights as required. At The Archetype Strategy, we focus on delivering tailored solutions that optimize and transform operational excellence for our clients. Our team thrives on collaboration, innovation, and a commitment to excellence. Joining us means being part of a forward-thinking organization that values expertise and growth. Powered by JazzHR QRLcBcMNDt

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact: Pearce is seeking a detail-oriented and experienced OSP Engineer to support telecommunications infrastructure projects. This role focuses on the design, planning, and implementation of outside plant (OSP) projects involving copper and fiber networks. The ideal candidate will have a strong background in engineering, permitting, and construction coordination, along with the ability to manage budgets and ensure compliance with company and industry standards. Core Responsibilities: Engineering & Design * Design and plan outside plant facilities for copper and fiber infrastructure (aerial, buried, conduit). * Prepare and review engineering drawings, loop loss calculations, and switch serving area designs. * Conduct field measurements for poles, conduits, and buried facilities to support network design. * Develop project budgets, monitor actual costs, and conduct job inspections for quality assurance. Permitting & Compliance * Prepare, organize, and submit permit packages to relevant agencies (Township, County, State, DNR, Railroad, Pipeline, etc.). * Ensure designs meet permitting regulations and engineering standards. Field Coordination * Meet with municipal and government officials to coordinate around road projects (travel required; mileage reimbursed). * Collaborate with other utilities to coordinate relocations, minimize conflicts, and avoid project delays. * Support service orders, subdivision expansions, road relocations, dark fiber MDUs, and more. * Update FROGS (CAD), Varasset, and SiteTracker tools as required. Project & Construction Support * Coordinate with SSP contractors to ensure timely and budget-conscious project completion. * Assist with make-ready work and joint-use coordination for Ziply-owned poles. * Conduct site surveys, support PUC complaint investigations, and create capital projects (e.g., for cell towers or plant repairs). * Address and resolve plant damage requests (DOR/PDR), cable count changes, and other network service needs. Administrative Support * Maintain records, update engineering files, and process departmental documentation. * Draft and type correspondence, reports, and engineering support documents. Core Experience: * 3–5+ years of hands-on experience in copper and fiber optic network engineering. * Minimum 5 years in network engineering or OSP-related work, including permitting and fiber record management. * Strong project management and organizational skills with the ability to handle multiple projects simultaneously. * Proficiency in Ziply engineering tools and systems, including FROGS, Varasset, and SiteTracker. * Skilled in communication and collaboration with municipal officials, utility companies, contractors, and cross-functional teams. * In-depth knowledge of permitting procedures and OSP construction practices. * Willingness to travel locally for fieldwork and meetings (mileage reimbursed). • Preferred candidates located in the Pacific Standard Time (PST) zone. Highly qualified candidates in the Mountain Standard Time (MST) zone may also be considered. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$36—$38 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job DescriptionJob Title: Network & Fiber Optic Technician Location: Seattle, WA Job Type: Limited Contract Salary: $30 - $40 USD per hour (Based on Experience) Job Summary We are seeking a skilled and proactive Network Technician with Fiber Optic skills for a project. The ideal candidate will be responsible for installing, maintaining, and troubleshooting a network infrastructure to ensure maximum uptime & performance. The ideal candidate will also be responsible for the installation, splicing, testing, and troubleshooting of fiber optic cables. You will be the interface person for LAN/WAN connectivity, hardware installation, and ensuring systems run seamlessly to support client operations. You will ensure that all work meets industry standards and company specifications to deliver high-quality connectivity. Project Term: 45 days, starting in late May Key Responsibilities: • Monitoring & Security: Monitor network performance (LAN/WAN), • Testing & Troubleshooting: Diagnose and resolve any network failures, connectivity issues, and performance bottlenecks, reducing downtime. Utilize industry-standard test equipment, including OTDR (Optical Time-Domain Reflectometer), power meters, and fiber identifiers to troubleshoot, repair, and validate network performance., • Documentation: Document network configurations, maps, and troubleshooting procedures for future reference., • Safety & Maintenance: Perform regular maintenance and manage network devices. Adhere to all safety protocols (PPE), OSHA standards, and company procedures., • Client Coordination: Work with clients and hardware to maintain uptime and manage technical issues and equipment, if necessary., • Installation: Install, configure, and maintain network hardware, including routers, switches, firewalls, Wi-Fi access points, and cabling (Cat5/6, Fiber). Qualifications: • Experience: Minimum of 2+ years of hands-on experience in fiber optic splicing, testing, and maintenance., • Education: Bachelors degree in Computer Science, Information Technology, or equivalent experience., • Technical Skills: In-depth knowledge of TCP/IP, VLANs, DNS, DHCP, and routing protocols., • Certifications: CompTIA Network+ or Cisco Certified Network Associate (CCNA) is highly preferred, • Requirements:, • Valid Drivers License with a clean driving record., • Ability to pass a background check and drug screen., • Ability to lift up to 50 lbs., • Availability to work days, nights, weekends, and on-call for emergency restoration.

Job Description Overview Circet USA is the leading provider of Network Services in North America, and we're looking for talented professionals to join our team. We specialize in engineering and construction services delivering comprehensive solutions across Inside Plant, Outside Plant, and Wireless networks to meet the evolving infrastructure needs of our customers. With nearly 50 years of industry experience, we work with major telecom service providers, MSOs, cloud service providers, and utilities. At Circet USA, you'll have the opportunity to make an impact by helping to create customized solutions that address our clients' unique challenges. If you’re passionate about innovation and thrive in a dynamic environment, we’d love to hear from you. Circet USA’s benefits package includes the following: • Medical, Dental, and Vision insurance, • Digital Health & Wellness Support, • Critical Illness, Accident, & Hospital Insurance, • Short-term & Long-term disability, • Group term & Voluntary life insurance, • Flexible Spending and Health Savings Accounts, • Paid Time Off & 401K, • Company Discount Website Responsibilities The Telecommunications Equipment Installer III (Lead) is responsible for the installation and maintenance of telecommunication equipment for a variety of carriers. This includes fiber, transport equipment and all critical infrastructures within a central office. This lead role will provide high-quality service in customer technical spaces including data centers, mobile telephone switch centers, central office wire centers, and designated enterprise spaces. ESSENTIAL DUTIES & RESPONSIBILITIES include the following: • Physically place, remove, or modify working and non-working equipment including the following:, • Install superstructure components in support of cabling systems such as auxiliary bars, threaded rods, cable racking, cable trays, wire basket systems, etc..., • Cutting, filing, drilling, modifying infrastructure components and working with various tools such as bandsaw, hammer drill, jigsaw, ratchet/sockets, etc…, • Installation of data equipment cabinets and frames, data servers, switches, routers, repeaters, bridges, gateways, multiplexers, transceivers, firewalls., • Making connections / terminations to BDFBs and fuse panels., • Identify, label, measure, terminate and physically route power cables to servers, switches, and other equipment, adhering to electrical safety standards., • Identify, label, measure, terminate and physically route fiber optic and copper cables for high-speed data transmission, ensuring precise cable management and minimal signal loss, • Set up and install power distribution units (PDUs), ensuring redundancy and proper load balancing to prevent power issues., • Conduct testing and document performance characteristics of hardware and software; determine efficiency, reliability, and compatibility with existing system., • Conduct fiber light meter, CAT5/6 and volt ohm meter testing to ensure proper levels, continuity, and termination points., • Perform test and turn-up along as well as other integration activities., • Resolve equipment and technical issues as they arise., • Read, analyze, and interpret detailed specifications and drawings, blueprints, schematics, and method of procedures (MOPs), • Perform quality validation on in-process and completed work., • Complete operations paperwork (e.g., expense reports, timesheets, job documentation, etc.) including daily job status reports as requested., • May oversee the work of less experienced installers; assume responsibility for the successful completion of installation projects., • Act as a customer contact; interface with customers and local supervisors regarding project status, • Interact with all members of the organization including Installation, Engineering, Project Management, • Perform other duties as requested. SAFETY DUTIES & RESPONSIBILITIES Industry Consensus Standards Circet USA Injury and Illness Prevention Program Manual • Participate in job site safety/hazard analysis Qualifications • High school diploma or equivalent required, technical or college degree preferred., • Minimum of three years of experience or equivalent technical skills in central office equipment / data center installation, • Clear understanding of AT&T, Telcordia, and/or Verizon Quality Standards, • Knowledge and experience with telecommunications equipment including Dell, HP, Arista, Ciena, Fujitsu, Cisco, Calix, Adtran, Nortel, Nokia, etc., • Background in fiber optic cable and AC/DC power installation and testing practices, • Proficient use of Microsoft programs, IOS and/or Android applications, • Ability to read and understand technical drawings and documentation., • Good mechanical aptitude including usage of basic power tools., • Strong organization as well as verbal and written communication skills, • Demonstrated problem-solving skills; ability to define problems, collect data, establish facts, and draw valid conclusions., • BICSI certification is a plus LANGUAGE SKILLS • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write routine reports and correspondence., • Ability to speak effectively before employees of the organization. MATHEMATICAL SKILLS • Ability to add, subtract, multiply and divide in all units of measure. REASONING ABILITY • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. POSITION QUALIFICATIONS/ REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Exhibit personal power and leadership, • Exhibit self-awareness, • Exhibit a tendency for continuing education and self-improvement, • Exhibit enthusiasm and determination, • Exhibit industry awareness, • Exhibit exceptional organizational skills, • Exhibit the ability to live the Circet USA Values TRAVEL • Willing to travel, • Valid driver’s license with acceptable driving record and proof of insurance, • Must have reliable transportation and the ability to transport minor job-related tools and equipment to work locations PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle or feel. The employee is required to walk, sit, reach with hands and arms, climb or balance, stoop, kneel or crouch, talk and hear. The employee must regularly lift 5-50 lbs, and occasionally lift over 50 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Circet USA is an Equal Opportunity Employer - Veteran/Disabled. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law. Pay Range in the United States: $24 - $36 based upon geography, skills, and experience. May also be eligible for performance incentive opportunity based on company and individual goals and performance

Job Description Job Summary Liberty Electric is searching for a Fiber Optic Technician to join our team. We are Union shop out of local 46. The position involves working on existing and new fiber optic networks in the greater Seattle area. The candidate will be part of construction from start to finish. Task will include everything innerduct, fiber optic cable, patch panel, splice case placement, and fusion splicing. Duties and Responsibilities • Perform prep and fusion of single-mode or multi-mode fiber optic cables for both inside and outside plant construction., • Perform fiber panel audits and splice case audits., • Properly place mid-sheath splices., • Test and troubleshoot fiber using an OTDR, optical power meter, fiber identifier and scope., • Work with Construction Project Managers and Fiber Design to perform splicing as directed., • Provide Fiber Design team with detailed reports of field splicing activity., • Perform all work as necessary to conform to quality control guidelines (includes compliance with requirements outlined in applicable regulations such as: OSHA, FCC, NESC and NEC, etc.; as well as following procedures as outlined in the Installation, Technical, Operations, and Safety Manuals, and Employee Handbook)., • Clean, maintain, stock and secure equipment., • Maintain a positive attitude and strong work ethic that can provide high productivity with minimal supervision., • Construct proper splice cases pressurized and non-pressurized, using all types and sizes of cable, including, but not limited to: grounding, bonding, isolation, slack storage and sealing., • Make precise recommendations for changes in running fiber optic cables and provide input into construction methodologies., • In coordination with Construction Manager, prepare required Wimps needed with the NOC for all maintenance splicing required., • Work with Fiber Design on required parts and equipment., • Work flexible hours as needed and on-call nights and weekends., • Fiber Optic Cable Placement, • Innerduct Placement, • Must possess a valid driver's license and maintain a clean driving record. Requirements/Qualifications Education: • 5+ year of splicing experience with the ability to properly place a mid-sheath splice.

Job Description Job Title: Manager I, II, III, Engineering Project Management Department: Engineering Reports To: Program Manager Employment Status: Full Time, Salary (Exempt) Primary Location: Seattle, WA We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. Terra, a Congruex Company, is looking for Manager, Engineering Project Management to join our team. Learn more about our operating unit at: Who is Congruex Congruex designs and builds broadband and wireless communications infrastructure. The work we do enables everything in the modern world to operate, from healthcare and energy to transportation and social interactions. We deliver turn-key network solutions under a single platform by aligning our engineering and in-market construction operating units. Our vision is to be the best end-to-end provider of network services in the U.S. and our core values of GRIT connect everything we do. We are building tomorrow, together. Will you join us? Your New Job Job Summary: The Project Manager is responsible for reviewing civil plans, defining project scope and objectives, coordinating activities of a project team, and identifying resources. Develops detailed work plans based on the civil design, meeting project schedules, providing engineering and construction estimates, and producing status reports. Responsible for project tracking and analysis in order to take action to direct the analysis and solutions of problems. Ensures adherences to quality standards and reviews project deliverables. Job Responsibilities (Including, but not limited to): · Oversee projects from conception through completion/end of construction. · Lead a project team within a designated area including vendors and contractors. · Manage tasks to ensure on time completion to meet project construction schedules or client deadlines. · Manage capacity, production, and cycle time expectations. · Lead internal and external meetings with other project managers and team members to review the status of the program and implement changes as necessary to ensure timely completion. · Attend project meetings with public jurisdictions and private utility companies to provide client with comprehensive status reports and resolve any conflicts or issues that arise. · Ensure that all work is maintained in a tracking system with complete accuracy. · Develop and update processes and procedures to streamline workflows. · Identify innovative ways to reduce work cycle times and increase quality. · Retrieve, analyze, transform, and report data for business intelligence. Required Skills & Qualifications: General · High school diploma or GED equivalent. · Minimum 5 years’ Project Management experience. · Deadline driven, self-motivated, and technically savvy. · Excellent verbal and written interpersonal communication skills. · Superior time management skills. · Able to read and understand civil design plans, cross-sections and details. · Extremely organized with strong attention to detail. Ability to be flexible, take direction with ease, including changes to schedule and workflow priorities. · Critical thinking skills; make assessments and provide solutions to problems. · Ability to maintain professional tact in a fast-paced work environment with internal personnel and clients. · Superior customer service. Dedication to providing customers “White Glove Service”. Technical · Experience conducting end to end project management of large fiber deployment projects; able to provide technical and analytical guidance to a project team. · Experience managing Outside Plant and Inside Plant projects. · Advanced experience with MS Excel, MS Word, Bluebeam and Google Earth. · Experience with various fiber optic / carrier / collocation products and services in an operational, engineering or implementation role. Desired Skills & Qualifications: · Relationship management experience (government/city officials, clients, etc.) preferred. · Experience with Civil/and or telecommunications construction background preferred. · Bachelor’s or master’s degree in science, Technology, Engineering or Mathematics preferred. · PE License or EIT Certification is not required, but preferred. Why Work At Congruex No matter what role you play, you are an important part of the One Congruex Family. We offer: · Medical, Dental & Vision Benefits · 401(k) Program with a Company Match. · Free Wellness Resources & Marketplace Discounts · Paid Maternity & Parental Leave · Paid Basic Life Insurance & Voluntary Options · The pillars of Congruex culture are GRIT, safety, inclusion, and family. The Fine Print: We will determine salary based on skills and experience in relation to the function of the role, as well as equity to employees in similar roles. Some benefits have eligibility criteria. All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.

Job Description This position works exclusively onsite in Newport, WA, on a 4-10 schedule Monday through Thursday. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship for an employment visa at this time. The Network Analyst is responsible for supporting the deployment and maintenance of customer premises equipment (CPE) and ensuring reliable fiber connectivity for residential and business customers. This role involves direct interaction with customers, troubleshooting network issues, and collaborating with internal teams to deliver high-quality service. Secondarily, this role is also responsible for the support and operational functionality of the primary District Enterprise networks including ethernet or fiber network, wireless networks, and Storage Area Network (SAN) systems. The ideal candidate should have excellent customer service skills and feel comfortable employing these skills in an office environment. Essential Functions: • Coordinate and assist with RSP service requests for fiber service disconnects, reconnects, and Fiber Line Extensions associated with the configuration and provisioning of CPE devices (e.g., NIDs)., • Troubleshoot fiber connectivity issues remotely, assisting CNS Fiber Technicians or RSP Technicians to ensure timely resolution., • Monitor fiber network performance and escalate issues as needed to the Broadband Network Administrator or CNS Fiber Technicians., • Provide technical support and guidance to fiber customers regarding fiber services and equipment., • Collaborate with CNS Fiber Technicians to ensure accurate fiber service activation., • Participate in testing and validation of new fiber technologies and tools., • Design and implement ethernet, wireless, and SAN systems to achieve the District’s strategic goals., • Troubleshoot network or wireless connectivity issues relating to the District’s Enterprise network systems., • Monitor the District’s ethernet, wireless, and SAN systems for performance, • Collaborate with IT Department staff, Department Managers, and Directors developing connectivity solutions for projects and efficient operations., • Maintain accurate records of installations, service calls, customer interactions, and Helpdesk tickets., • Performs on-premises and remote troubleshooting through experienced diagnostic techniques, • Identify problems and guide clients through corrective steps, • Write knowledge base articles and maintain documentation to improve client references, • A self-starter with the ability to work independently requiring little supervision Other Duties: • Must work directly or indirectly with District customers on a regular, ongoing basis. Must provide a high level of professional, prompt, efficient, accurate, courteous, and reliable service in such a manner as to reflect favorably on the District and to ensure high quality service to District customers., • Understand and demonstrate a commitment to the P. U. D.’s mission, vision, core values, and strategic plan., • Adhere to all safety policies and procedures. Promote a safe work environment for all employees, contractors, and customers, in order to ensure a reliable workforce and an educated community., • Be respectful of all employees and customers, listening to their requests and understanding their needs., • Act as a responsible steward of public assets and trust. Foster open and honest communications, listen, and understand other perspectives., • Foster teamwork and promote unity of the District and its departments., • Remain current with information and industry technology and apply training and experience to real world problems, • Ensure adequate cross training within the department for critical tasks and processes, • Associate’s or Bachelor’s degree in Information Technology, Telecommunications, or related field (or equivalent experience)., • 3+ years of experience in fiber network support and CPE configuration., • Strong understanding of fiber optic technologies, GPON/Active Ethernet, and Layer 2/3 networking., • Experience with CPE devices from vendors such as Zhone/DZS, Nokia, Calix, Adtran, or Ubiquiti is a plus., • Experience with Aruba network, wireless, and storage devices, • Experience with NetApp and PureStorage SAN equipment, • Strong knowledge of IPv4/IPv6, DHCP, NAT, and VLANs, • Understanding of routing using static routes, or routing protocols such as BGP or MPLS, • Understanding of SAN systems architecture, functionality, and operation including LUN configurations, iSCSI or Fiber Channel communications, and storage provisioning concepts., • Familiarity with network monitoring tools and ticketing systems., • Proficient in the use of Microsoft Office applications, such as Word and Excel, including OneDrive and Teams, • Excellent communication and problem-solving skills., • Ability to work independently and manage multiple tasks in a fast-paced environment., • Strong problem-solving capabilities, • Excellent customer service skills, • Ability to communicate in a professional manner, • Above-average phone skills, • High focus on quality and customer satisfaction, • Certifications such as CompTIA Network+, Cisco CCNA, or FOA CFOT are desirable. Other requirements • Valid driver license, • Post-offer background check Physical Requirements • Frequent use of a computer and exposure to terminal screens., • Frequent repetitive hand/wrist motions and finger manipulation., • Frequently handle material of moderate weight, up to 15 pounds and occasionally 35-40 pounds., • There is occasional exposure to hazards or risk of injury that are primarily protected against or predictable., • Typically requires use of one of more senses of medium intensity and long duration. The District offers a competitive benefits package that includes medical, dental, vision, FSA for medical and/or dependent care, VEBA, a variety of life insurance and AD&D options, deferred compensation (401(a) and 403(b)), Washington State PERS, short- and long-term disability and a generous personal leave bank. This position is non-exempt (hourly) within grade 8: entry $34.76 | target $42.57 | premium $50.38. Actual rate is based on qualifications and experience.

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

Seeking two full-time Maintenance Technicians for an apartment community in Renton, WA.This is an exciting opportunity with a company that values our team mates and company culture.Rental housing discount available if living on site.Horizon is a fast-growing property management company that owns and

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

If finding an effective fix and supporting customers with the highest level of service standards sounds appealing to you, Canon USA, a leader in technology, solutions, and services, wants to know your story.We’re actively seeking a Field Service Technician to deliver amazing experiences and elevat

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

We're currently looking for individuals across the country to take part in remote paid market research, including online focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing y

SUMMARY : NO Tools Needed! ANY Metal Work experience in ANY Industry Considered! Any Aircraft experience Desired! The Sheetmetal Technician works under general supervision to safely layout, fabricate, and install parts, equipment and fabricated items on aircraft following established operating proce

Overview We are authentic, professional providers of fun, focused on building a Great Place To Work For All by staying true to our mission: "Life's a Party, We're Makin' It Fun!" and "So Much Fun It's Scary!" At Spencer's and Spirit, we do the right thing always-integrity, fairness, respect, and tra

FedEx - 651 South Alaska Street - Responsibilities: Provide timely, quality maintenance for FedEx vehicle fleet and ground support equipment; Document work with appropriate repair orders and parts ordering using FedEx computer systems; Ensure work is in accordance with OSHA and DOT standards; Guide

Avenue5 Residential - - Responsibilities: Address apartment and property maintenance duties as assigned by supervisor or property manager; Perform repairs to electrical, plumbing, appliances, flooring, carpentry, HVAC, and grounds maintenance; Maintain work order system and ensure timely completion

Customer Service / Remote] - Anywhere in U.DOE / Health-Dental-Vision-Life-FSA-HSA / 401(k) plan - As a Call Center Representative, you will: Assist customers with inquiries and concerns through multiple communication channels including phone, email, and chat; Provide exceptional customer service by

Call Center / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k / PTO - As a Customer Service Rep at Planet Home Lending, you will: Respond to borrower inbound calls concerning their account, ensuring high quality service and adhering to productivity and regulatory requiremen

Aerotek - JobID: JP-005851092 [Production Operator / Assembly Line Worker] As an Assembler at Aerotek, you'll: Perform assembling, loading, and unloading of parts; Be involved in a fast-paced environment and many overtime opportunities; Perform other duties as assigned.

National Assemblers - - Responsibilities: Receive customer orders to complete installation or assembly jobs in customers' homes; Communicate with the customer to confirm all appointments; Assemble the product to National Assemblers specifications; Build a strong rapport with customers and ensure 10

Aerotek - - Responsibilities: Reviewing pick slips and work orders; Packaging products accurately on a production line; Following clear, standard work instructions; Standing and working on your feet for an 8-hour shift; Using basic computer systems to track or confirm work.

Verstela - - Responsibilities: Assemble window parts using adhesives; Read and interpret blueprints and work order specifications; Use hand and power sanders to prep surfaces for paint; Operate CNC router and thermoform machines; Package and prepare parts for shipment.

Illinois Tool Works - 8661 154th Avenue Northeast, Ste 100 - Responsibilities: Serve as the primary point of contact for key customer accounts, including service-related issues.Routinely plans, leads, and executes complex technical projects including installations and turnkeys.Diagnose and repair so

CareerPaths NW - JobID: 100-135929737 [Maintenance Mechanic] As a Service Technician at CareerPaths NW, you'll: Disassemble, inspect, reassemble, and test pumps to ensure optimal functionality; Clean and inspect rotating equipment for quality assurance; Estimate repair costs and assemble new equipme

Illinois Tool Works - 8661 154th Avenue Northeast, Ste 100 - Responsibilities: Installs mechanical and electrical commercial food equipment and assists in more advanced installs as needed.Maintain, diagnose, and repair basic mechanical commercial food equipment for customers on contract and/or on ti

As a FT Call Center/Customer Service Rep [Work From Home], you will: Handle incoming calls and inquiries from customers in a professional and courteous manner; Provide accurate and efficient assistance with customer inquiries, complaints, and requests; Maintain a high level of product knowledge to e