Fiber optic jobs in Austin, TexasCreate job alerts

Electrical Superintendent (Industrial & Infrastructure) Location: Austin, Texas Position Type: Full-Time, Permanent Role Overview We are seeking a highly skilled Electrical Superintendent to lead on-site field operations for large-scale industrial and infrastructure projects across Texas. You will be the primary authority for ensuring that all electrical installations—from underground duct banks to complex instrumentation—are executed safely, on schedule, and in strict compliance with the NEC and ___ standards. Key Responsibilities • Team Leadership: Direct and mentor field crews (Foremen, Journeymen, and Apprentices) to hit productivity targets., • Project Execution: Manage the layout and installation of complex underground conduits and duct banks, including trenching and concrete encasement., • High-Spec Installations: Oversee the bending and fitting of rigid metal conduit (RMC) and the installation and termination of medium voltage cables (5kV–35kV)., • Technical Validation: Supervise the calibration and programming of industrial instrumentation and ensure all fiber optic terminations and testing (OTDR) meet project specs., • Safety Mastery: Lead daily safety meetings and enforce 100% compliance with OSHA and NFPA 70E (Arc Flash) safety protocols., • Licensing: Valid State of Texas Journeyman Electrician License required; Master Electrician License is strongly preferred for permit-pulling authority., • Experience: 5–10 years in electrical construction with at least 3 years in a Superintendent or leadership role., • Technical Skills:, • Expertise in Medium Voltage terminations and testing., • Proficiency in bending/installing rigid conduit., • Experience with instrumentation calibration and duct bank installation., • Safety: OSHA 10 Construction is required; OSHA 30 is strongly preferred., • Salary Range: Competitive pay depending on experience, • Tools for Success: Company-provided vehicle or truck allowance, fuel card, and laptop/tablet., • Health & Wellness: Comprehensive Medical, Dental, and Vision insurance., • Future Planning: 401(k) with company matching and generous Paid Time Off (PTO).

Job Description Vanderlande Logistics is seeking experienced mechanical and controls technicians in support of the team located in Austin, Texas, to fill Maintenance Technician Level III roles. This position requires experience and knowledge in the responsibilities as outlined. Responsibilities: Performing maintenance, repair, troubleshooting, and testing of the Baggage Handling System and their associated components, providing accurate and timely written reports of safety, operational, and maintenance activities. Must have the ability to interpret data and suggest maintenance schedule/activity adjustments to the Manager. Update daily, weekly, and monthly maintenance activity schedules. Order and maintain a stock of spare parts necessary for proper servicing of the BHS. Ensure all Preventative and Predictive Maintenance practices and procedures are scheduled and followed. Physical requirements include, but are not limited to: Lifting (50 to 100 pounds), bending, reaching, climbing, walking, crawling, standing, sitting, climbing stairs, speaking, sight, and/or hearing to complete the job duties. Required Skills / Education: • Experience: Five + years of experience, • Education Required: HS Diploma or GED or equivalent experience required, • Electro-Electronics / Mechanical skills required., • Excellent Customer Relations skills., • Adhere to all safety regulations and safe work practices., • Mechanical troubleshooting skills including but not limited to belts, bearings, pulleys, drives, and gearmotors., • Industrial electrical troubleshooting skills including 480V three phase motor and control circuits, electrical schematic print reading, variable frequency drives, motor starters, and input/output systems required., • Working knowledge of PLC systems and operations preferred., • Familiarity with high level control systems SCADA systems, and network architecture including servers, ethernet, fiber optic, network switches (ethernet, fiber), workstations, and barcode scanning systems., • Maintenance management software skills including generating and completing preventive and corrective maintenance, scheduling maintenance, and tracking inventory., • Basic management and supervisory skills involving organization, communications, scheduling, and computers., • Must have driver license with clean MVR., • Ability to pass all background checks and security screenings per airport requirements., • Qualified Applicants must be legally authorized for employment in the United States. Why Join Vanderlande? • Benefits Start on day one. The starting pay rate for this position is $ 36.00. The actual wage offered may be lower or higher depending on budget and candidate experience, knowledge, skills, qualifications and premium geographic location., • $1,000 Sign on Bonus, • We value our employees and create an environment for career growth, • Equal opportunity workplace that embraces and promotes ownership culture, empowerment, open communication, diversity, and collaboration, • Professional development and tuition reimbursement, • Matching 401(k), • 18 days of paid PTO

Quantiq runs considerable "in-house" infrastructure (IPA realm) consisting of 50-100 computers ranging from high performance servers and varied datacenter hardware (switches, FPGAs, fiber optic cabling), to desktop computers with dedicated GPUs and an array of monitors and peripherals across offices

Job Description We are seeking a highly skilled Electrical Superintendent to lead on-site field operations for large-scale industrial and infrastructure projects across Texas. You will be the primary authority for ensuring that all electrical installations—from underground duct banks to complex instrumentation—are executed safely, on schedule, and in strict compliance with the NEC and Texas Department of Licensing & Regulation (TDLR) standards. Key Responsibilities • Team Leadership: Direct and mentor field crews (Foremen, Journeymen, and Apprentices) to hit productivity targets., • Project Execution: Manage the layout and installation of complex underground conduits and duct banks, including trenching and concrete encasement., • High-Spec Installations: Oversee the bending and fitting of rigid metal conduit (RMC) and the installation and termination of medium voltage cables (5kV–35kV)., • Technical Validation: Supervise the calibration and programming of industrial instrumentation and ensure all fiber optic terminations and testing (OTDR) meet project specs., • Safety Mastery: Lead daily safety meetings and enforce 100% compliance with OSHA and NFPA 70E (Arc Flash) safety protocols., • Licensing: Valid State of Texas Journeyman Electrician License required; Master Electrician License is strongly preferred for permit-pulling authority., • Expertise in Medium Voltage terminations and testing., • Proficiency in bending/installing rigid conduit., • Experience with instrumentation calibration and duct bank installation., • Safety: OSHA 10 Construction is required; OSHA 30 is strongly preferred., • Salary Range: Competitive salary depending on experience., • Tools for Success: Company-provided vehicle or truck allowance, fuel card, and laptop/tablet., • Health & Wellness: Comprehensive Medical, Dental, and Vision insurance., • Future Planning: 401(k) with company matching and generous Paid Time Off (PTO). PI282883883

Job Description Centric Fiber is a start-up telecommunications Company that is looking to disrupt the market and provide the fastest most reliable service for Cable, Internet, and TV service available. Centric Fiber partners with home builders to install superior fiber infrastructure directly in the ground during beginning phases of development. This means all homes in a community are already hardwired for high-speed fiber internet, without added costs or complications. The Fiber Splicer is responsible for the terminating, splicing, bonding/grounding, installing CPE into customer house, documenting, and testing of all fiber optic cables within the systems fiber optic networks and their related equipment with the end goal of providing maximum operating efficiency. RESPONSIBILITIES/ESSENTIAL FUNCTIONS: • This position will consist of FTTH daytime, but possibility of some night work., • Fusion splice, terminate and install assortment of fiber optic connectors and enclosures including both loose tube fiber and ribbon fiber up to an 288ct fiber cable., • Construct a splice case, including but not limited to bounding, slack storage and sealing., • Must know the fiber optic color code system (Must be able to discern colors)., • Prepare and maintain splicing records, schematics, and diagrams., • Proficient in using fiber tools and fiber optic test equipment including traffic meters, fusion splicer, power meter, VFL and OTDR., • Troubleshoot damaged fiber, effectively and efficiently., • Install and maintain CPE local area networks (LAN) and WiFi networks, • Install and maintain network interface devices (NID) and Optical Network Terminals (ONT), • Perform skilled troubleshooting from the MDF to the demarcation point including CPE, • Respond to trouble tickets within acceptable company timeframe standards, • Perform routine preventive maintenance and major repairs to distribution systems, • Locate buried copper and fiber optic cabling, • Record and report all record changes immediately, • Ensure that both he/she and all employees comply with proper safety standards/ procedures and work practices according to OSHA standards, Future Infrastructure and/or the customer, whichever standard is higher., • Able to participate in on-call rotation 24/7/365 and work overtime with/without prior notice. Equivalent Education/Experience: • High School Diploma or General Education Degree (GED), • At least 2 years of experience with Fiber Terminations, Fusion Splicing and Testing in an ISP and OSP environment., • Ideal candidate should also have experience as a fiber optic technician, fiber optic splicer, construction with fiber optic background, or fiber optic telecommunications., • Clean & Valid Driver's License, • Ability to travel up to 75% of the time throughout Austin, Dallas, Houston, and San Antonio., • Own hand tools drills, bits, cutters, etc. GrUilNM2jP

Job Description At GFiber, we believe that great internet has the power to drive innovation, strengthen communities, enable the impossible, and do all the everyday things that make all of our world go round. And the job of creating better internet is never done - so we're growing! Our team is committed to building a place where people who want to make a difference can grow their careers and find their spot to belong. GFiber is an Alphabet company that brings Google Fiber and Google Fiber Webpass internet services to homes and businesses across the United States. Our teams are expanding as we connect more cities and people to exceptional internet. The application window will be open until at least March 13th, 2026. This opportunity will remain online based on business needs which may be before or after the specified date. The Field Operations team is responsible for the installation, maintenance, and repair of residential and small business services. Within the Field Operations department, the Field Service Center team is responsible for dispatching and technical support of GFiber's Field Technicians, helping to expand and maintain GFiber's Wired and Wireless customer installations and network construction. Role Description The Field Services Center Technician II supports the dispatch and technical support of: installing and repair of GFiber services, repair and maintenance of Outside and Inside Plant, planned maintenance, and preventative maintenance. Your primary responsibilities will require the use of service support software such as Salesforce - Field Service Lightning (FSL), Oracle Field Service Cloud (OFSC), GIS mapping systems and understanding of how to diagnose and correct all service impacting root causes from the central office, remote terminal or hut location to the customer premise equipments such as: • Impairments to/with all connections, • Drop cabling, • Network interface units, patch panels, • Media cabinets, • ONTs, • Inside wiring (fiber, ethernet , including backup powering, UPS, etc.), • Media gateways, Modems, Routers, switches, • OSP Cabling, • Resolve complex issues by troubleshooting impacted residential and small business services., • Coordinates multiple repair and maintenance resources for Outside Plant (OSP) on concurrent incidents., • Coordinate install fulfillment dispatch including route optimization and handling calls from technicians., • Have knowledge of installation and test of Ethernet jacks, making cross connects in telecom spaces (MDF, IDF, HDF) working with fiber optic cables, installing radio mounts, tuning microwave point-to-point radios and performing installation/construction duties, maintenance and troubleshooting., • Navigate complex customer interactions with exceptional client service, professionalism, and thoroughness., • 3 years experience in Fiber to the Home (FTTH) / Gigabit Passive Optical Network (GPON) /10 Gigabit Passive Optical Network (XGS) network construction and/or large scale fiber network deployments., • 3 years of experience managing relationships with a variety of contractors and vendors., • 3 years of experience in GIS or equivalent mapping systems., • Ability to work non-standard working hours including nights, weekends, holidays, and differing work rotations/shifts., • Experience using a computer in a professional setting., • 3 years experience with field services dispatch in telecom or similar industry., • 3 years of experience in fiber splicing for both termination and midspan use cases, OTDR and Power Meter fiber optic testing., • 3 years of experience with fiber to the B2B/Enterprise level fiber network construction/operations., • Experience troubleshooting Ethernet network issues related to routers, switches and hubs., • Experience with rack and stack work, assembling server stanchions, telemetry closet work (MPOE, DMARC, etc.), and patch panels., • Experience operating Google Workspace, Oracle Field Services Cloud (OFSC), and/or Salesforce - Field Service Lightning (FSL). The US base salary range for this full-time position is between $74,000 - $81,000 + bonus + benefits. Your recruiter will share more about the specific salary range for your targeted location during the hiring process. GFiber is committed to equal opportunity employment regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, gender identity, age, citizenship, marital status, disability or Veteran status. Disclosure is voluntary, and this information will be kept confidential in compliance with Google's Candidate Privacy Policy. For more information please refer to our Equal Employment Opportunity Policy and the EEOC's "Know your rights: workplace discrimination is illegal" (PDF). It's important to us to create an accessible, inclusive workplace for everyone. If you have a need that requires accommodation, please let us know by completing our accommodations for applicants form. Our candidate accommodations team will then connect with you to confidentially discuss your options.

Job DescriptionAll Qualifications Are Preferred Training will be provided if needed. ●Check light levels on future installs and trouble shoot accordingly if failing light level. ●Perform cable and fiber installation work including splicing fiber ●Terminate, splice, and install a variety of fiber optic connectors and enclosures including both loose tube fiber and ribbon fiber ●Proficient in using fiber tools and fiber optic test equipment including fusion splicers, OTDR, VFL's and other fiber equipment. ●Ability to troubleshoot damaged fiber, effectively and efficiently ●Ability to read, understand and update splice documentation and maps Perform construction activities, including, pulling new cable/fiber through conduits.

Job DescriptionOverview We are seeking a detail-oriented Data Center Cabling Technician to support structured cabling and physical layer infrastructure within a high-performance data center environment in Austin, TX. This role is heavily focused on fiber and copper installations, cable management, and ensuring clean, efficient, and scalable connectivity across the facility. Key Responsibilities • Install, route, and secure fiber optic and copper cabling(Cat5e, Cat6, Cat6a, SM/MM fiber), • Perform rack and stack support with an emphasis on proper cable routing and management, • Terminate, test, and troubleshoot fiber (LC, SC, MPO/MTP) and copper connections, • Read and interpret cable run lists, floor plans, and network diagrams, • Label cables and ports according to data center standards and maintain accurate documentation, • Perform cable tracing, auditing, and cleanup to maintain organized pathways, • Use testing equipment such as OTDR, power meters, and cable certifiers, • Support build-outs, expansions, and decommissioning projects, • Ensure proper use of ladder racks, trays, and patch panels, • Follow strict TIA/EIA and BICSI standards for structured cabling, • Experience: At least 1 year of prior data center rack and stack experience, including knowledge of data center hardware installation, cable management, and general data center operations., • Technical Skills: Basic understanding of server hardware, networking equipment, and how they integrate within a data center environment., • Physical Requirements: Ability to lift and carry equipment (up to 50 lbs), bend, kneel, and stand for extended periods of time. Comfortable working in tight spaces., • Attention to Detail: Strong attention to detail to ensure proper installation, cable management, and system configuration., • Problem-Solving Skills: Ability to troubleshoot basic hardware issues and report any problems or discrepancies to senior technicians., • Teamwork: Ability to collaborate effectively with other team members and follow instructions from senior technicians and project managers., • Previous experience working in a large-scale data center environment., • Familiarity with industry-standard data center racking systems and cabling practices. KpJr13pD6M

Job Description The Construction Technician is responsible for quality installation practices during installation of Hotwire services including video, voice and internet for commercial and residential applications including but not limited to common areas, IDFs and MDFs. RESPONSIBILITIES: • Assist installation and other teams with customer activation of fiber-optic telecommunication in subscriber homes (e.g., pulling low-voltage wire); including single family, condo and apartments in various locations., • Install and service full video services, including analog, digital, and HD TV., • Install, service, and disconnect telephone and internet customers; punch down telephone lines., • Maintain a safe work environment by following safe practices and adhering to safety policies, which includes practicing safe driving techniques., • Install all types of CAT5/CAT6 drop wire and install connectors on CAT5/CAT6 drop wire., • Trouble shoot video, telephone and internet problems from any telecommunications demark to customer premise equipment., • Troubleshoot IP issues from any telecommunications demark to customer premise equipment., • Successfully install all ancillary equipment provided to subscribers., • Test and tone all wires from equipment room to outlet., • Install RF In-Building cellular systems at various sites, perform equipment and system repair, maintenance and testing., • Identify and acquire parts for replacement and maintenance and Wire, connect, test and maintain new service or systems., • Install conduit/pathways in the ROW from source to site by trenching, excavating, hand digging etc., • Use RF test equipment such as a PIM unit, Line Sweep Tester or Light Meter to verify full functionality of installed components., • Utilize construction documents to plan and complete site builds., • Coordinate utility locates and implementation of traffic control plans., • Troubleshoot and resolve problems in electrical circuits, RF radios, omni directional antennas., • Plan new or modified installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent with specifications, safety codes and local electrical codes., • High School Diploma or equivalent required, Associates Degree in Internet Technologies is preferred, • At least 3 years’ experience installing, testing and troubleshooting cable, phone and internet, • Proven Fiber Optic Cabling experience, • Proficiency using small hand tools and larger power tools, • Must have active and clean, non-restrictive, state issued driver’s license in State where hired., • Must be comfortable working on a ladder and all heights, • Ability to work days, weekends, evenings and holidays and participate with on-call rotation as needed We truly appreciate and value all our employees and show our appreciation by offering a wide range of benefits, including: • Comprehensive Healthcare/Dental/Vision Plans, • 401K Retirement Plan with Company Match, • Paid Vacation, Sick Time, and Additional Holidays (including your Birthday!), • Paid Volunteer Time, • Paid Parental Leave, • Hotwire Service Discounts – for employees who live on a property serviced by Hotwire. Discounted service offerings are provided for high-speed internet, video service, phone, and security service, • Employee Referral Bonuses, • Exclusive Entertainment Discounts/Perks #LI-JG1 Hotwire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionJob Description: Lead Data Center Technician Position: Data Center Technician Company: The Archetype Strategy 5 Month Contract Pay: 30-40 (based on experience) Overview: The Archetype Strategy is seeking a detail-oriented and skilled Data Center Technician to join our team. In this role, you will be responsible for the critical infrastructure setup within data centers, including installing data cabinets, supporting pathways such as basket trays, and running pre-connectorized fiber. You will play a key part in ensuring that our data centers operate efficiently, reliably, and securely. Key Responsibilities: • Data Cabinet Installation: Install and align data cabinets and racks according to technical specifications and project requirements., • Pathway Support Setup: Design and install pathway support systems, such as basket trays and cable management solutions, ensuring optimal organization and efficiency., • Fiber Optic Installation: Run, terminate, and secure pre-connectorized fiber cables, ensuring accuracy and reliability in data transmission., • System Integration: Collaborate with engineering teams to ensure seamless integration of infrastructure with existing systems., • Quality Assurance: Conduct testing and inspections to ensure installations meet industry standards and company guidelines., • Documentation: Maintain detailed records of installations, configurations, and modifications within the data center., • Safety Adherence: Comply with all safety protocols and regulations, maintaining a safe and secure working environment.Qualifications:Required Skills and Experience:, • Demonstrated experience in data center installation or a related technical field., • Expertise in installing data cabinets, rack systems, and supporting infrastructure such as basket trays., • Hands-on experience with pre-connectorized fiber cable installation and management., • Familiarity with data center standards such as TIA/EIA-942 and BICSI guidelines., • Strong ability to read and interpret technical diagrams, blueprints, and layouts., • Excellent problem-solving skills and meticulous attention to detail., • Proven ability to lead and mentor a team of technicians, fostering a collaborative and productive environment., • Strong organizational and time-management skills to prioritize tasks and manage project timelines effectively., • Excellent communication (both written and verbal) and interpersonal skills to interact with team members, stakeholders, and clients., • Ability to delegate tasks effectively and provide clear instructions and guidance.Preferred Skills:, • Relevant certifications such as BICSI Technician, RCDD, or Fiber Optic Technician., • Experience working within operational data centers., • Knowledge of structured cabling systems and industry best practices.Physical Requirements:, • Capability to lift and handle equipment weighing up to 50 pounds., • Ability to work in confined spaces or at heights as required. Powered by JazzHR tjhHc49o8e

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Position OverviewSaronic Technologies is seeking a Senior Electrical Engineer specializing in ruggedized computing and networking systems to join our Electrical Engineering – Advanced Development group.This role will focus on the research, evaluation, and development of robust onboard computing architectures, embedded systems, and high-reliability network solutions that power Saronic’s autonomous vessel platforms.The ideal candidate will have deep experience designing and validating ruggedized electronic systems for mission-critical applications, including embedded computing, network topologies, data management, and environmental hardening for commercial maritime and defense use cases.This position bridges R&D, systems engineering, and hands-on integration - supporting both technology evaluation and fleet deployment.Key Responsibilities • Lead R&D initiatives in ruggedized computing and networking architectures for autonomous surface vessels., • Design, evaluate, and integrate embedded computing systems, data acquisition units, and network infrastructures optimized for high performance in harsh marine environments., • Conduct benchmarking and trade studies on ruggedized COTS and custom computing solutions (edge computers, network switches, routers, storage units, etc.)., • Develop and validate system architectures for high-availability networks supporting autonomy, sensing, and control subsystems., • Collaborate with software, autonomy, and mechanical engineering teams to ensure reliable data throughput and system resilience across vessel networks., • Specify and validate environmental and EMC/EMI compliance for computing and networking hardware., • Prototype and test system configurations in laboratory and field conditions, including shock, vibration, temperature, and humidity testing., • Author technical documentation, including R&D reports, trade studies, wiring diagrams, and integration standards., • Mentor junior engineers and contribute to internal design guidelines for next-generation computing and network systems., • Support system integration and troubleshooting during prototype builds, dockside commissioning, and sea trials.Required Qualifications, • B.S. or M.S. in Electrical Engineering, Computer Engineering, or related discipline., • 7+ years of experience in electrical or systems engineering focused on computing and networking technologies in ruggedized or mission-critical environments., • Expertise in embedded computing platforms, network design, and hardware integration., • Experience with Ethernet, CAN, serial, and fiber-optic communication protocols and their implementation in distributed systems., • Proven track record of benchmarking and trade study development for hardware performance and reliability., • Familiarity with marine, aerospace, automotive or defense environmental standards (MIL-STD-810, MIL-STD-461, IEC 60945, etc.)., • Strong understanding of power distribution, grounding, and thermal management in dense electronics enclosures., • Excellent communication skills and experience producing clear technical documentation and reports., • Hands-on experience with system integration and environmental testing.Preferred Qualifications, • Experience developing or integrating ruggedized computing solutions for maritime or defense systems., • Familiarity with network security, IEEE 1588/PTP Protocol, VLAN management, and deterministic networking for real-time systems., • Knowledge of data logging, storage, and redundancy architectures in distributed sensor networks., • Experience with hardware-in-the-loop (HITL) and hardware-software co-simulation environments., • Background in autonomous or remote vehicle platforms., • Understanding of cybersecurity standards and secure network design principles., • Experience using 3D CAD tools to communicate with other engineering groups (e.g. Siemens NX, Creo, SolidWorks), • Experience utilizing ECAD tools to define/draw single line diagrams and schematics (e.g. Altium, Zuken, AutoCAD, Siemens Capital)Benefits, • Medical Insurance: Comprehensive health insurance plans covering a range of services, • Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care, • Saronic pays 100% of the premium for employees and 80% for dependents, • Time Off: Generous PTO and Holidays, • Parental Leave: Paid maternity and paternity leave to support new parents, • Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses, • Retirement Plan: 401(k) plan, • Stock Options: Equity options to give employees a stake in the company’s success, • Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage, • Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Occasional standing and walking within the office., • Manual dexterity to operate a computer keyboard, mouse, and other office equipment., • Visual acuity to read screens, documents, and reports., • Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies.

Job DescriptionQuantiq specializes in high frequency derivatives trading in the largest markets worldwide. Our approach is rigorous and pragmatic, driven by technological expertise and analytics informed by real-world experience. We value employees who love to learn and have the tenacity, curiosity and willpower to contribute to our continuing success. We are a small but passionate team, dedicated to enhancing and refining our tried and true methods as we commit to our ongoing growth and performance. Quantiq runs considerable "in-house" infrastructure (IPA realm) consisting of 50-100 computers ranging from high performance servers and varied datacenter hardware (switches, FPGAs, fiber optic cabling), to desktop computers with dedicated GPUs and an array of monitors and peripherals across offices. We control the majority of the stack and create, maintain, update, and monitor a variety of systems to keep the companys trading running smoothly. Our hardware infrastructure operates entirely on Fedora Linux and incorporates significant first- and third-party software requiring occasional maintenance. This complete infrastructure has high uptime requirements to support our critical trading operations. Role Description: As a DevOps Engineer, youll be at the forefront of transforming and enhancing our infrastructure. You will collaborate with the Operations and Technical teams to improve our deployment pipelines, automate processes, and elevate our infrastructure. This position requires strong Linux expertise, automation skills, and a deep understanding of network configurations and performance tuning for low-latency applications. If the following resonates with you, we would love to welcome you to our team. Job Responsibilities: • Analyze current systems, identify gaps, and spearhead improvements to optimize performance and scalability, • Fine-tune Linux systems (kernel and user-space) to minimize latency and improve reliability, • Design and manage real-time, low-latency networking configurations, adjusting kernel parameters, IRQ affinities, and CPU pinning as necessary, • Implement automation solutions using scripting languages (e.g., Bash, Python), • Work with specialized hardware (FPGAs, custom network cards, high-frequency switches) to optimize latency in trading systems, • Develop and document backup procedures and failover strategies, conducting drills to improve failure tolerance, • 5+ years of experience in a DevOps, Systems Engineering, or related role, • Proven ability to build, optimize, and scale Linux-based infrastructure, • Excellent organizational skills and attention to detail in fast-paced environment, • Strong written and verbal communication skills, • Ability to respond to occasional off-hour emergencies, • Strong scripting and automation skills (Python, C++, Bash), • Exceptional capability debugging and solving complex issues related to both hardware, low level software, and networking, • Knowledge of network architecture, • Basic networking tool experience (ping, ifconfig, telnet, wireshark, nmcli), • Experience with the following technologies:, • Computer hardware (such as Supermicro and Dell Servers), • Networking hardware, • Fedora Linux, • FreeIPA, OpenLDAP, OpenVPN, • DNS, • ZFS, • Gitea, Zulip, • GRUB, PXE*Note: You are not expected to know every technology listed but experience in all is a plus Please Apply If: • You are a problem solver who wants to understand the intricacies of a complex system, • Youre a scripting pro who automates everything, • You know the thrill of building, breaking, and re-building CI/CD pipelines Attach the file in the "Cover Letter" section.

Job DescriptionSalary: Hourly Fiber Splicer Technician BROADBAND TELECOM SERVICES, INC. Broadband Telecom Services is a full-service telecommunications construction contracting company with multiple locations throughout the state of Texas. JOB DESCRIPTION The Fiber Splicer Technician will specialize in fiber optic cables to expand telecommunications networks into new developed areas or replace/repair existing lines. PREFERRED QUALIFICATIONS Strong attention to detail Ability to follow Supervisors instructions Valid Drivers License is required Must be able to pass background/drug screening Travel might be required ESSENTIAL JOB FUNCTIONS-INCLUDE, BUT ARE NOT LIMITED TO THE FOLLOWING Perform cable construction, maintenance, repair, and troubleshoot to address signal issues Knowledgeable in all types of splicing activity, cable, and safety equipment while using various types of cable construction equipment. Locate and repair cable faults to sustain existing cable network without causing signal disruptions Authenticate start to finish service provisioning for the cable network Check accurate cable terminations on cross connect, patch panels, hubs, and routers Must be able to maintain and ensure company safety procedures are followed Excellent communication, organizational, leadership, and problem-solving skills Position requires exposure to outside elements EDUCATION & LICENSES/CERTIFICATES: • High school diploma or equivalent preferred., • Ability to work aloft., • Must have manual dexterity and the ability to utilize various hand tools and test equipment., • Must be able to drive a truck or van including a truck/van with an aerial lift, • Must be able to lift up to 50 pounds., • Must be able to type on a computer, and utilize a smart phone to read and update prints., • Must be able to kneel, crawl, push, pull, bend, stoop, lift and dig. BENEFITS • Paid Time Off (Holiday/Vacation/PTO), • Benefits Package, • 401K Retirement plan with company match Please visit our website at apply online and learn more about our company. Broadband Telecom Services is an equal opportunity employer and does not unlawfully discriminate against employees or applicants for employment on the basis of an individuals race, color, religion, creed, sex, national origin, age handicap, disability, marital status, veteran status, reserve or National Guard status, or any other status protected by applicable law. Broadband Telecom Services, Inc. participates in the E-Verify Program.

Job DescriptionTechnician – Fiber Installations Reports to: Manager – Fiber Installation Job Summary: Centric Services (“Centric”) delivers industry-leading high-speed internet through Centric Fiber and natural gas services through its UniGas division. Centric serves ground-up commercial and residential developments, as well as master-planned communities in all major metropolitan markets across Texas and Central Florida. As the only integrated telecom and natural gas provider currently in the market, Centric is rapidly expanding into new regions due to its advantageous dual-model approach. Our team is dedicated to bridging infrastructure gaps through strategic value creation and continuous innovation. The Technician – Fiber installations is the main interface for home builders and subscribers in residential communities. This role is responsible for performing fiber splicing, residential home installations, preparing, and troubleshooting fiber optic cables and systems for Centric Fiber customers. The position is field-based, requiring daily reporting to the office and traveling into Centric communities. Responsibilities: · Perform fiber splicing, testing, and troubleshooting of fiber optic cables and connections. · Point of contact for 3rd party contractors for troubleshooting. · Conduct residential home installations of internet, phone, TV, and cable services. · Provide customer assistance, education, and information on Centric services, customer equipment, and products. · Troubleshoot and resolve service issues on-site. · Upsell applications and additional equipment to customers when appropriate. · Take appropriate action to expedite workflow to consistently meet customer appointments and company commitments. · Interface with customer and technical service departments to collaborate on subscriber issues, develop troubleshooting and corrective action plans, work scheduling, and ticket clearing. · Install, service, disconnect, change, or reconnect telephone and modem equipment, serving customer residences. · Install, service, disconnect, change, or reconnect for television and provisioning in MAUI system. · Provide general maintenance and troubleshooting for FDHs. · Assist ISP tech with troubleshooting and maintenance of distribution cabinets. · On call support for after-hours and weekend issues. · Support region with rollout of new equipment and software rollouts. · Ensure all work is completed in accordance with company procedures and in compliance with municipal, state, and federal laws and guidelines. · Participate in community and company social media outlets – monitor company commentary, respond to complaints and accolades, and monitor community happenings. Requirements · High School Diploma or GED. · 2+ years of related telecommunications or mass media experience. · Previous customer service experience. · Valid driver’s license and clean driving record. · Ability to work hours that may include evenings, weekends, and holidays if necessary. · Must be able to work effectively with a team in a fast-paced environment. · Up to 100% local market travel and up to 10% travel to all markets in Texas. Preferred Requirements: · College-level training in telecommunications or mass media. · Prior fiber splicing experience strongly preferred. Benefits · Competitive base pay · Great benefits (medical, dental, vision, and more) · Generous PTO policy · 10 company-paid holidays · 401(k) plan with 5% company match Centric Infrastructure Group is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description OUR COMPANY: EOS IT Solutions is a Global Technology and Logistics company, providing Collaboration and Business IT Support services to some of the world's largest industry leaders, delivering forward-thinking solutions based on multi-domain architecture. Customer satisfaction and commitment to superior quality of service are our top business priorities, along with investing in and supporting our partners and employees. We are a true International IT provider and are proud to deliver our services through global simplicity with trusted transparency. WHAT YOU WILL DO: As a Fiber Optical Splicing Technician, you will be responsible for the installation, splicing, testing, troubleshooting, and maintenance of fiber optic cabling infrastructure. This hybrid role combines the practical skills of an Intermediate Technician with the advanced expertise and leadership qualities of an Expert/Lead Technician. You will work within mission-critical environments, ensuring precision, documentation accuracy, and adherence to safety and quality standards. This role requires 90% travel. Must be located near a major airport. KEY RESPONSIBILITIES: • Perform fusion and mechanical splicing of single-mode and multi-mode fibers, including ribbon fiber splicing., • Prepare and terminate fiber optic cables using industry-standard methods and tools., • Install and manage fiber in various environments including ODFs, splice trays, enclosures, and patch panels., • Conduct cable preparation including stripping, cleaving, cleaning, and protection of fibers., • Label and route fiber in compliance with documentation and design standards., • Use advanced test equipment (OTDR, OLTS, power meters, visual fault locators) to certify and troubleshoot fiber links., • Perform end-to-end testing including insertion loss, return loss, and reflectance measurements., • Analyze OTDR traces to identify faults, splices, and connector losses., • Produce detailed test results, reports, and documentation for client acceptance and compliance verification., • Diagnose and repair faults in fiber optic networks, including complex and escalated issues., • Perform root cause analysis and implement corrective actions to prevent recurrence., • Respond to service outages and perform emergency repairs with minimal disruption to live traffic., • Execute high-count and ribbon fiber splicing projects, including mass fusion splicing., • Manage fiber assignments, routing, and labeling in large-scale installations., • Support fiber network expansion, migration, and reconfiguration projects with minimal service interruption., • Maintain detailed records of splicing, testing, and repair activities., • Ensure all work complies with industry standards (e.g. ITU-T, FOA, BICSI, TIA/EIA, NEC), safety regulations, and company policies., • Participate in quality audits and ensure compliance with both company and client operational standards., • Minimum 3–5 years' hands-on experience in fiber optic splicing, testing, and installation (Tier 2 or Tier 3 level)., • Deep understanding of optical fiber theory, attenuation, dispersion, and signal integrity., • Proficiency with high-precision fusion splicers (e.g., Fujikura, Sumitomo, or INNO)., • Skilled in interpreting fiber network design drawings, splice schematics, and optical budgets., • Experience working with both inside plant (ISP) and outside plant (OSP) environments., • Advanced use of OTDRs, light source/power meters, visual inspection scopes, and fiber identifiers., • Ability to interpret and troubleshoot complex OTDR traces and reflectometry data., • Knowledge of fiber characterization testing, DWDM/CWDM network considerations, and loss budgets., • Comfortable working within data center environments, including hot/cold aisles and structured cabling systems., • Understanding of cable management best practices, rack layouts, and physical infrastructure documentation., • Experience working in live network environments with strict uptime SLAs., • In-depth knowledge of safety standards for fiber optic work, including laser safety and confined space awareness., • Familiarity with environmental and electrical regulations (OSHA, NEC, and local standards)., • Consistent track record of adhering to quality assurance processes and precision workmanship., • Strong communication and interpersonal skills to collaborate with engineers, project managers, and clients., • Demonstrated leadership in mentoring junior technicians or overseeing small project teams., • Excellent time management, prioritization, and multitasking abilities under tight deadlines., • Analytical mindset with strong attention to detail and commitment to accuracy., • Proactive and self-motivated, with the ability to work independently in remote or field conditions., • Proficiency with digital documentation tools, fiber management software, and reporting systems., • Competent with Microsoft Office Suite, Google Workspace, or equivalent documentation platforms., • FOA CFOT, CFOS/T, or BICSI certifications (or equivalent regional qualification)., • Manufacturer training/certification (e.g., Corning, CommScope, or AFL)., • Experience in hyperscale or enterprise data center environments., • Project leadership or supervisory experience within a technical team. At EOS IT Solutions, we are committed to supporting the well-being and success of our team. Our comprehensive benefits package includes: • Health, Vision, and Dental Insurance starting the 1st of the month after your start date., • Travel pay: Compensation provided for any work-related travel outside of your assigned local area, in accordance with EOS travel policy, • Occasional overtime and bonus opportunities for hourly workers, • 10 Days of Paid Time Off (PTO) annually, • 12 Paid Holidays, • 6 Sick Days (available after 90 days of employment) EOS is committed to creating a diverse and inclusive work environment and is proud to be an equal opportunity employer. We invite you to consider opportunities at EOS regardless of your gender; gender identity; gender reassignment; age; religious or similar philosophical belief; race; national origin; political opinion; sexual orientation; disability; marital or civil partnership status or other non-merit factor. #FIBEROPTIC Pay Range$25.48—$32.69 USD

Job DescriptionLocation: Position requires nationwide travel so candidate can be located anywhere within the U.S. Why CCI? CCI Systems, Inc. is an Employee-Owned solution provider specializing in telecommunications, comprehensive network assessments, industry-leading engineering, drafting and design services, and 24/7 support services. Come join our team of engineers and experts that guide our customers toward the right choices to future-proof their network for years to come. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We value our employees’ hard work and determination and REWARD results all while having fun! Our mission is to make life better by innovating tomorrow’s communication solutions today. We are seeking Coax Splicers who are responsible for maintaining and repairing Hybrid Fiber-Coaxial (HFC) systems. Duties include coax cable splicing, system installation and activation, troubleshooting signal issues, and performing preventative maintenance. The role involves balancing forward and return paths using test equipment, maintaining plant infrastructure, and ensuring optimal network performance. Responsibilities • Interpret schematics and design drawings to perform splicing, activation, and testing of HFC outside plant infrastructure for both new construction and legacy systems., • Upgrade hardware and infrastructure, including comprehensive plant documentation and installation of HFC active and passive components such as nodes, amplifiers, line extenders, taps, splitters, and power supplies. Accurately document detailed field notes, operate a bucket truck, access network enclosures and nodes, and utilize various testing equipment for system verification., • Responsibilities are distributed across hardline coaxial splicing, system sweeping, and network activation activities., • Install fiber optic enclosures, nodes, and related equipment as necessary., • Work with customers, subcontractors, and other team members in the field to define, collect, and determine information from customers and customer facilities for project requirements., • Conduct DOCSIS 3.1 testing and evaluations, perform targeted system sweeps, accurately document findings, and compile system data to generate comprehensive technical reports., • Diagnose and resolve plant-related issues to mitigate upstream noise and forward path impairments within the cable system. Utilize standard outside plant (OSP) tools, including Optical Time Domain Reflectometers (OTDRs), Time Domain Reflectometers (TDRs), light meters, and signal strength meters, to ensure optimal system performance., • Ability to understand and calculate system Radio Frequency (RF) signals to quickly make necessary adjustments to resolve issues and report accurate information to project supervisors., • Understanding the project's Statement of Work (SOW) and escalation process for deviations., • Report accurate daily project updates for productivity tracking and project billing., • Define, develop, and share technical knowledge and stay current on technical advancements., • 1-3 years’ experience splicing hardline distribution coax is required., • 1-3 years’ experience in a HFC Sweep/Technician role within the Service Provider space, or similar, is required., • Must have experience performing production upgrades in a CATV OSP environment, with demonstrated proficiency in system troubleshooting., • Must have experience splicing optical nodes, amplifiers, line extenders, taps, splitters, power supplies in both aerial and underground locations., • Proficient in the use of TDR test equipment, cable locators, signal level meters, and standard hand tools for outside plant operations. Experienced with a range of test equipment, including but not limited to: Viavi SCU 1800 sweep generator, Viavi OneExpert ONX-630, Viavi DSP TDR, OTDR, volt-ohm meters (VOM), and light meters., • Possesses in-depth knowledge and hands-on experience with Viavi/JDSU equipment for both sweeping and DOCSIS testing applications., • General understanding of HFC headend networks and optical systems (forward and return paths), along with foundational knowledge of CMTS, FTTx architectures, and ISP operations., • Ability to maintain accurate record keeping, reporting, and great attention to detail., • Able to read and understand plant maps for CATV system designs., • Technical certification from SCTE, NCTI, or similar field training is preferred., • Consulting background and experience working with multiple customers is preferred., • Experience setting up and optimizing new optical node locations is preferred., • Bucket truck and safety certifications are preferred., • Able to work independently on projects and take direction from teammates and develop skills to advance professionally., • Strong verbal and written communication skills., • Capable of following directions and adhering to strict deadlines., • The ability to embrace corporate values, understand the company vision, and exemplify CCI leadership behaviors. Shift is Monday-Friday between the hours of 7:00 a.m. to 4:00 p.m. and/or 11:00 p.m. to 7:00 a.m. CST but must be able to work outside normal business hours when required for system maintenance and subscriber outages. Additional information • Approximately 75% nationwide travel is required, typically 16 days on-site and 5 days off at home., • Must have a valid driver’s license and a good driving record., • Must be able to pass a DOT Medical Examination to obtain and maintain a DOT Commercial Motor Vehicle Certification. #LI-DNI

Job Description Location: Austin and surrounding areas Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee’s hard work and determination and REWARD results all while having fun! Our mission is to make life better by innovating tomorrow’s communication solutions today. We are seeking Fiber Splicers who hold a crucial position in guaranteeing prompt delivery and excellence in Telecommunications services for our clientele. Responsibilities include deciphering schematics and diagrams to splice, terminate, and test fiber-optic connections for both new constructions and service setups. Additionally, the role involves the maintenance, troubleshooting, and rectification of damaged cables and associated concerns within the outside plant network. Responsibilities • Splice and maintain new and existing fiber., • Prep and splice single-mode (SM) and multi-mode (MM) optical fiber cables ranging from single to ribbon and loose tube., • Splice and repair fiber optic cables using single and mass fusion equipment., • Terminate fiber using various connectors or pig tails., • Test fiber using OTDR, OLTS, Power Meters, and VFL., • Install required splice capsules and hardware., • Perform mid-sheath cable entries along with the ability to splice fibers in an active network., • Maintain existing plant without causing signal failure interruptions., • Respond to network outages and perform required troubleshooting and repairs., • Keep up-to-date records of project progress, including production sheets, time sheets, and necessary customer documentation., • Maintain splice equipment, trailers, and vehicles., • Complete certification testing of fiber optic systems., • Experienced in understanding and adhering to safety including those outlined by OSHA, NESC, NEC, and other pertinent standards., • Maintain knowledge of all organizational policies and governmental regulations., • Maintain a safe work environment by following CCI’s policies and procedures., • Perform other duties as assigned by management. Qualifications • 2+ years of fiber splicing and troubleshooting experience preferred., • Knowledge of fiber optic theory which includes fiber loss connector types and the different types of fibers preferred., • Experience with both ribbon fiber and loose tube with combination in deribbonizing and ribbonizing preferred., • Ability to test fiber using OTDR, OLTS, Power Meters, and VFL preferred., • Ability to use single and mass fusion splicing machines preferred., • Ability to differentiate between different fiber sizes and colors preferred., • Ability to read splicing matrix, splice, and test fiber in various environments like FTTH, underground, and aerial preferred., • Ability to place aerial and underground splice closures along with other closures common to the splicing and termination of fiber-optic cables preferred., • Capable of efficiently accomplishing the allocated workload within the specified timeframe while maintaining exceptional quality standards., • Proficient in prioritizing tasks and adapting schedules to accommodate evolving requirements., • Ability to detect safety issues and work independently., • Record and document testing per customer specifications., • Complete daily production reports to document work performed., • Good communication and organizational skills., • Proficient with MS Office and various web-based software., • Self-starter and dependable with great attention to detail. Time requirement • Must be willing to travel up to 100%; may include overnight stays on a weekly basis dependent on candidate location and region. If further travel is required, this could consist of 10 days on and 4-5 days off., • Maintenance of customer networks may entail working outside regular business hours, including evening and overnight shifts., • Candidates may eventually be required to be on call on a rotational basis which may include nights and weekends. General information • Must have a valid driver’s license acceptable driving record., • Must be able to pass a DOT physical., • Piece rate after initial training has been completed and able to work independently., • Must provide own hand tools to satisfactorily complete all job functions. Specialty tools will be provided., • Willing to work indoors in confined space, poorly ventilated areas such as attics, basements, crawlspaces, and/or manholes. Exposure to dust, dirt, noise, insects, rodents, pets, and cleaning solutions., • Able and willing to work outdoors and in inclement weather conditions., • Ability to work up to 50’ in a bucket truck, ladder, and/or climb utility poles., • Mechanically inclined and able to use hand tools and equipment to help complete an assigned project., • Maintain a professional working attitude with co-workers and customers. #LI-DNI

Job DescriptionQuantiq specializes in high frequency derivatives trading in the largest markets worldwide. Our approach is rigorous and pragmatic, driven by technological expertise and analytics informed by real-world experience. We value employees who love to learn and have the tenacity, curiosity and willpower to contribute to our continuing success. We are a small but passionate team, dedicated to enhancing and refining our tried and true methods as we commit to our ongoing growth and performance. Quantiq runs considerable "in-house" infrastructure (IPA realm) consisting of 50-100 computers ranging from high performance servers and varied datacenter hardware (switches, FPGAs, fiber optic cabling), to desktop computers with dedicated GPUs and an array of monitors and peripherals across offices. Quantiq controls the majority of the stack and creates, maintains, updates, and monitors a variety of systems to keep the companys trading operational. Within our hardware infrastructure we run entirely on Fedora Linux and have significant first and third party software that requires occasional maintenance. This complete infrastructure has high uptime requirements to support our trading operations. Role Description: As a System Administrator, you will be responsible for keeping all internal infrastructure, both hardware and software, running smoothly and supporting the operations and software teams on a day-to-day basis. You will be responsible for full system life cycles: provisioning, install and setup, asset and inventory management, maintenance, monitoring, and decommission of a variety of systems. You will also deal with vendors to acquire new hardware and deploy it. You may occasionally find yourself setting up a desktop or monitor in addition to racking servers. If the following resonates with you, we would love to welcome you to our team. Job Responsibilities: • Troubleshoot and monitor proprietary frameworks/code and third-party systems, • Manage access credentials to a variety of applications and trading systems, • Exhibit cautious and responsible use of sysadmin privileges, • Make infrequent trips to our Austin and Chicago datacenters to maintain hardware, • Create, document, and enforce backup procedures and failovers in all systems, • Run drills/trials and improve failure tolerances across infrastructure, • Assist with onboarding new hires to in-house systems and infrastructure, • 5+ years of experience in a Linux-based admin role, or equivalent, • Attention to detail in a fast-paced environment, • Ability to respond to occasional off-hour emergencies, • Excellent organizational skills and strong written and verbal communication skills, • Exceptional capability debugging and solving complex issues related to both hardware, low level software, and networking, • Ability to perform Bash and Python scripting, • Basic networking tool experience (ping, ifconfig, telnet, wireshark, nmcli), • Knowledge of network architecture is a plus, • Experience with the following technologies:, • Computer hardware (such as Supermicro and Dell Servers), • Networking hardware, • Fedora Linux, • FreeIPA, OpenLDAP, OpenVPN, • DNS, • ZFS, • Gitea, Zulip, • GRUB, PXE*Note: You are not expected to know every technology listed but experience in all is a plus Please Apply If: • You run a home lab for fun and enjoy the sound of server fans, • You are a problem solver who wants to understand the intricacies of a complex system, • You are a distro hopper and can discuss the nuances of your preferred distribution, • You are the type of person to remember the IP address of a certain machine on your network, • You love to see nicely organized, color-coded, and labeled cables If you do not know C++, use another language and explain your decisions. Attach the file in the "Cover Letter" section.

Job Description About Premier Datacom: Premier DataCom is a low voltage cabling business founded in 2005 in Austin, Texas. We specialize in structured cabling, security, AV, and wireless systems- serving all of Texas and our surrounding states. Our certified team delivers expert design, clean installations, and reliable support for schools, healthcare, government, and commercial clients. Trusted by major organizations, we’re known for professionalism, precision, and long-term partnerships. Open Positions: Structured Cabling Technicians (Tech I, II, III) We are looking for motivated and skilled technicians at multiple levels to join our growing team. Whether you’re just starting in low-voltage systems or have advanced installation and leadership experience, Premier DataCom offers opportunities to build your career with training, mentorship, and advancement. Technician I – Starting Rate: $20/hr Entry-Level / Support Role * Assist with installation of copper and fiber cabling (Cat5e, Cat6, Fiber Optic, etc.) under supervision. * Pull, route, and label cables in a variety of environments. * Learn proper use of tools, testing equipment, and installation standards. * Support team members in daily tasks. * Ideal for candidates with limited experience but a strong work ethic and willingness to learn. Technician II – Starting Rate: $24/hr Experienced Installer * Install, terminate, test, and label copper and fiber cabling with minimal supervision. * Plan and execute cable routing (overhead, under-floor, conduit, etc.) efficiently and safely. * Learn and execute closet installations. * Read and interpret blueprints, floor plans, and specifications. * Install and configure network racks, patch panels, and related hardware. * Troubleshoot and resolve connectivity or installation issues. Technician III – Starting Rate: $28/hr Lead / Advanced Role * Lead complex installations and ensure adherence to industry standards and project timelines. * Oversee and quality-check all aspects of structured cabling projects. * Act as a key point of contact for project managers and clients on technical matters. * Execute and oversee closet installations. * Train to individually Lead on small projects. * Operate company vehicles and machinery when necessary. * Troubleshoot advanced system issues and implement effective solutions. * Mentor and train junior staff, fostering team development. Qualifications (vary by level): * Tech I: Strong work ethic, willingness to learn, and ability to work in construction environments. * Tech II: 2+ years of structured cabling or related experience, demonstrated technical proficiency. * Tech III: 5+ years of structured cabling experience with leadership responsibilities. * Familiarity with industry tools and testing equipment (toner, tester, punchdown tools, OTDR, etc.). * Ability to safely operate ladders, lifts, and hand/power tools. * Valid driver’s license and reliable transportation required. * BICSI certification, OSHA 10/30, or other relevant credentials are highly desirable. What We Offer: * Competitive starting wages: Tech I ($20/hr), Tech II ($24/hr), Tech III ($28/hr) * Opportunities for advancement and specialized training * Supportive team environment and on-the-job mentorship * Paid holidays, PTO & Company Benefits (after applicable probationary period) * Tools and equipment provided, as needed * Consistent work with reputable clients and projects

Job Description Location: Position requires travel so the candidate can be located anywhere within the US. Why CCI? CCI Systems, Inc. is an Employee-Owned solution provider specializing in telecommunications, comprehensive network assessments, industry-leading engineering, drafting and design services, and 24/7 support services. Come join our team of engineers and experts that guide our customers toward the right choices to future-proof their network for years to come. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We value our employees’ hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communication systems. We are seeking a Field Engineer to provide technical expertise pertaining to customer network upgrades, services, field management and project administration with a full understanding of HFC distribution systems. Responsibilities • Assess Outside Plant (OSP) and Inside Plant (ISP) hardware and infrastructure including but not limited to plant documentation, Hybrid Fiber Coax, (HFC) active and passives, reading and understanding OSP diagrams/drawings, taking and maintaining accurate field notes, operation of a bucket truck, accessing network enclosures and nodes and operation of testing gear., • Correct customer network failures and improve overall network performance using sweep gear and CATV test equipment., • Diagnose and repair plant related issues to reduce upstream noise and forward path impairments within the cable system with the use of standard OSP tools to include OTDR's, TDR’s, light meters, and signal strength meters., • Conduct targeted system sweeps, document findings, and deliver system information to create system reports., • Perform head end and meter set up., • Perform DOCSIS 3.1 testing and assessments., • Calculate system signal losses and make necessary adjustments to resolve issues., • Reduce and diagnose upstream noise within the cable system., • Install/align/optimize HFC equipment including fiber optic nodes and related equipment., • Install in-line devices on system backbone (node, amplifiers, line extenders, taps, splitters, and power supplies) as necessary for sweep and system upgrade projects., • Work with customers, subcontractors, and other team members in the field to define, collect, and determine information from customers and customer facilities for project requirements., • Implement and oversee a team of technically sound, customer-minded, and quality focused technicians and subcontractors tasked with delivery of best-in-the-world services to CCI Systems, Inc. customers., • Assign daily workload to in-house technical staffing and subcontract labor to enable TFS to fulfill contract obligations with customers., • Work with project managers to ensure daily field operations, staffing, quality control and deliverables are driving necessary profitability goals per project., • Approve weekly project documentation; this includes subcontractor production reporting, in-house employee production reporting, technical documentation, and other necessary documentation., • Meet with customers at local level to discuss any project related issues., • Understanding the project SOW and escalation process for deviations., • Report accurate daily project updates for productivity tracking and project billing., • Define, develop, and share technical knowledge and stay current on technical advancements., • Ensure the proper development and training of new employees to assigned project., • 5-7 years’ experience as a Coax Splicer., • 5-7 years’ experience in a HFC Sweep/Technician role within the Service Provider space., • Consulting background and experience working with multiple customers preferred., • Sweep certification preferred., • DOT Certification & Bucket Truck and Safety Certifications preferred., • Test equipment will include but not limited to the following: VIAVI SCU 1800 Sweep Generator, VIAVI OneExpert ONX-630, VIAVI DSP TDR, OTDR, VOM, and Light Meter., • Full understanding of Viavi/JDSU gear regarding sweep; includes head end and meter set up., • DOCSIS testing experience., • Full understanding of an HFC head end; combining, optics (forward and return), and basic understanding of CMTS, FTTX, and ISP., • In-Depth understanding of OSP (outside plant) and proficient in troubleshooting., • Test result evaluation and reporting., • Able to work independently on projects and take direction from teammates and develop skills to advance professionally., • Strong verbal and written communication skills., • Ability to take direction and work within timelines., • Demonstrates leadership skills to positively influence others, mentor, and collaborate with teammates, communicate on the level of others, listen, and understand people in circumstances common in the workplace. Additional information • Approximately 75% nationwide travel is required, typically 14 days on-site, travel days, and 5 days off at home., • Must have a valid driver’s license and a good driving record., • Must be able to pass a DOT Medical Examination to obtain and maintain a DOT Commercial Motor Vehicle Certification., • This is a remote position when not traveling. #LI-DNI

Job Description Equipment Operator/ Splicer Centric Fiber is a start-up telecommunications Company that is looking to disrupt the market and provide the fastest most reliable service for Cable, Internet, and TV service available. Centric Fiber partners with home builders to install superior fiber infrastructure directly in the ground during beginning phases of development. This means all homes in a community are already hardwired for high-speed fiber internet, without added costs or complications. The Equipment Operator/Splicer is responsible for assisting the Splicer in terminating, splicing, bonding/grounding, installing CPE into customer house, documenting, and testing of all fiber optic cables within the systems fiber optic networks and their related equipment with the end goal of providing maximum operating efficiency. This position is also responsible for operating mini excavators and other equipment on project job sites. RESPONSIBILITIES/ESSENTIAL FUNCTIONS: • Assist the Splicer in all daily activities., • Splice fiber optic cables., • Troubleshoot and perform maintenance to resolve signal problems., • Operate technical and heavy equipment., • Reading and interpreting work prints and splice diagrams., • Become familiar with digging plans, machine capabilities and limitations, and with efficient and safe digging procedures in a given application., • Observe hand signals, grade stakes, or other markings when operating machines so that work can be performed to specifications., • Operate machinery to perform activities such as backfilling excavations, vibrating or breaking rock or concrete, or making winter roads. Equivalent Education/Experience: • High School Diploma or General Education Degree (GED), • Clean & Valid Driver's License, • Proficiency with hand tools, • Knowledge preferred but will train the right candidate, • 1 to 2 years’ experience operating heavy machines., • Effective communication skills, as required in responding to customer questions and complaints., • Organized and attentive to detail with the ability to multi-task., • Proficiency in the use of a computer, and software applications including Microsoft Office., • Solid interpersonal skills – outgoing, positive, and user-friendly., • Prefer related experience in a start up environment., • Prefer related work experience in a Fiber Optic installation operation position., • Full time job with great benefits, • Generous PTO Policy, • 10 Company Paid Holidays MB0t3AI9xf

Job Description Centric Fiber is a start-up telecommunications Company that is looking to disrupt the market and provide the fastest most reliable service for Cable, Internet, and TV service available. Centric Fiber partners with home builders to install superior fiber infrastructure directly in the ground during beginning phases of development. This means all homes in a community are already hardwired for high-speed fiber internet, without added costs or complications. The Splicer Apprentice is responsible for assisting the Splicer in terminating, splicing, bonding/grounding, installing CPE into customer house, documenting, and testing of all fiber optic cables within the systems fiber optic networks and their related equipment with the end goal of providing maximum operating efficiency. RESPONSIBILITIES/ESSENTIAL FUNCTIONS: • Assist the Splicer in all daily activities., • Splice fiber optic cables., • Troubleshoot and perform maintenance to resolve signal problems., • Operate technical equipment., • Reading and interpreting work prints and splice diagrams. Equivalent Education/Experience: • High School Diploma or General Education Degree (GED), • Clean & Valid Driver's License, • Proficiency with hand tools, • Knowledge preferred but will train the right candidate, • Ability to travel up to 75% of the time throughout Austin, Dallas, Houston, and San Antonio., • Safety equipment, boots, hard hat, etc., • Effective communication skills, as required in responding to customer questions and complaints., • Organized and attentive to detail with the ability to multi-task., • Proficiency in the use of a computer, and software applications including Microsoft Office., • Solid interpersonal skills – outgoing, positive, and user-friendly., • Prefer related experience in a start up environment. rxOTqixhBM

Job Description Job Title: Low Voltage Cabling Technician (Full-Time) Location: Austin, TX (Work Across Data Centers in the USA) Position Overview: We are seeking a Low Voltage Cabling Technician to join our client's team and support the daily project life cycles in live data centers. In this role, you will be responsible for installing fiber optics and copper cables on predetermined routes within the data center. You will work closely with a team, and all tasks will be supervised and coordinated by the team leader. This position requires manual handling and often involves working at low heights using mobile working platforms (electric or non-electric). Key Responsibilities: • Unbox and unpack cables., • Scan cable barcodes using the provided client scanner., • Label cables according to the cable schedule., • Pull and route cables along designated paths., • Professionally dress cables with velcro wraparound ties., • Patch cables into the correct ports on switches., • Work safely using the provided Personal Protective Equipment (PPE) and mobile working platforms.Requirements:, • Experience in installing copper and fibre optic cables., • Strong attention to detail., • Ability to follow instructions and work as part of a team., • Basic understanding of data centre environments is preferred., • Capable of manual handling and working at low heights.Work Schedule:, • Monday to Friday, 8:00 AM - 5:00 PM (1-hour lunch break).Benefits:, • PPE provided when needed., • Opportunity to work on live data centre projects across the USA. By applying to this job, as part of our typical recruiting process, from time to time, we may contact you regarding positions that we feel are a good fit for you or engage with you during the recruiting process via SMS text message. Message and data rates may apply, depending on your mobile phone service plan. At any time you can get more help by replying HELP to these texts, or you can opt-out completely by replying STOP. Our Terms of Service are available at . Powered by JazzHR K43Pem5LqQ

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

Xinquan Texas Automotive Interiors, LLC is part of Xinquan Group, a global leader specializing in the design, manufacture, and sales of automotive interior and exterior trim system components and molds.Our headquarter is located in Changzhou, China.With over 10,000 employees worldwide, we offer the

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

At Poolie, we started with a simple goal: make pool maintenance.From day one, our mission has been to raise the bar in pool service, combining expertise, integrity, and a commitment to customer satisfaction.Health, dental, and vision insurance, short & long-term disability, PTO, and 10 paid holidays

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

Job Description Job Description HIGHLY MOTIVATED Individual Wanted Are you a talented and motivated HVAC Service Technician eager to contribute to the growth of an established company? We are a dynamic and forward-thinking organization looking for a skilled technician to join our team.Apply Today!

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25/hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You do

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25/hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You do

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25/hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You do

Benefits include: Contest Prize Awards, 401K Plan with Company Match, Employee Assistance Program, 30% Merchandise Discount.All Bonuses, Awards and Benefits subject to qualifications and eligibility.Brand: Spencer's ?The Sales Associate is responsible for maintaining Guest Services as per Company St

Customer Service / Remote] - Anywhere in U.Competitive pay & benefits - As a Call Center Rep at Jackson Hewitt Inc.Receive inbound/ make outbound calls to clients to learn about and address their needs, complaints, or other issues with products or services; Respond efficiently and accurately to clie

Manufacturing [Field Technician / Maintenance Mechanic] As an Equipment Maintenance Technician at Tesla, Inc.Perform Preventative Maintenance on industrial production and mechatronic equipment; Determine the root cause of equipment failures and convey appropriate measures to relevant teams; Perform

Customer Service / Remote] - Anywhere in U.Competitive Pay & Benefits / Flexible Schedule / Career Growth / Meaningful Impact - As a Call Center Representative (CSR) at Wellcove, you will: Provide excellent customer service via phone and email; Respond to customer inquiries and resolve issues in a t

Customer Service / Remote] - Anywhere in U.DOE / Health-Dental-Vision-Life-FSA-HSA / 401(k) plan - As a Call Center Representative, you will: Assist customers with inquiries and concerns through multiple communication channels including phone, email, and chat; Provide exceptional customer service by

Customer Service / Fully Remote] - Anywhere in U.Competitive pay / $500 retention bonus / Medical, dental, and vision / 401K / PTO / Equipment provided / Paid training - As a Call Center Support Rep you'll: Receive a large volume of inbound phone calls; Assist with outbound call campaigns; Answer ge

Customer Service / Remote] - Anywhere in U.Medical, dental & vision / 401k / PTO / Equipment provided - As a Call Center Associate at Vector Security, you will: Receive inbound communications from customers via multiple channels including phone, chat, email and text and provide positive customer exp

Customer Service / Remote] - Anywhere in U.Medical-Dental-Vision-401(k) with match / Hours: 6p-2a HST - As a Call Center Specialist, you will: Answer incoming calls from clients seeking information about pet hospice services; Provide compassionate and knowledgeable support to pet owners during diffi

Illinois Tool Works - 8403 Cross Park Drive - Responsibilities: Perform computer related tasks such as order entry, inventory transactions, and shipping paperwork; Responsible for rental repairs including installing replacement parts to rebuild rental equipment; Maintain rental facility, inventory,