Fire protection jobs in San Diego, CaliforniaCreate job alerts

Sprinkler Installer IV Be part of the future! We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to making a difference. What we offer: Competitive Starting Pay Paid Training Global Advancement Opportunities Company Vehicle (as applicable) Referral Bonuses Comprehensive Benefits * Medical/Dental/Vision insurance * Health Savings Account (HAS) * Life Insurance * 401(k) savings plan with company match * Short-Term and Long-Term Disability * Employee Assistance Program * Wellness Program * And more! What you will do Fire Sprinkler Installation employees are responsible for the installation, service, and repair of fire protection systems including wet, dry, pre-action, deluge, and foam suppression systems, as well as fire pumps and backflow devices. How you will do it Applies judgment based on practice and precedence. May allocate work as a team leader, bringing all changes, discrepancies, and coordination problems that impair installation activities to the immediate attention of the construction manager. Frequently resolves problems through the research of multiple alternatives. Must maintain proper documentation for all work performed. May review project drawings to obtain all facts necessary to perform installation activities according to specifications. Must be able to work alternative shifts or weekends to meet customer and/or job requirements. May be required to participate in a scheduled after hours on-call rotation. Must adhere to all company safety policies and procedures. Required Minimum of 3-5 years of documented experience in installation and service of fire sprinkler systems, or the equivalent in a mechanical background. Possess a valid driver’s license and driving record that meets company requirements. Able to obtain and retain any licenses required by National, State and Local codes. High School Diploma or equivalent. Trade school degree or certificate preferred Ability to follow verbal and written instructions. Able and willing to perform physical labor including carrying and moving equipment and tools weighing up to 70 lbs. Able and willing to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 60 feet, working within ducts, crawl spaces, above ceilings, etc. Experience reading and understanding construction blueprints, diagrams, and specifications used in installation activities. Able and willing to work flexible hours. Ability to adhere to, implement, and always follow safety guidelines and procedures. Excellent communication skills, using tact and diplomacy when dealing with customers and team members. Strong organizational skills, positive attitude, and an ability to learn quickly. Able to pass a pre-employment background and drug test. Preferred OSHA/MSHA/NICET Certifications Sprinkler Foreman experience HIRING HOURLY RANGE: $30.95 - $40.38 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at

Job DescriptionSalary: $25.00-$32.00 DOE Commercial Fire Protection is seeking a Fire Life Safety Inspector in the Southern California area.There's never been a more exciting time to join our team! We are in an accelerated growth phase in a rapidly expanding industry and are seeking motivated, self-driven individuals looking for a long-term career. Responsibilities include testing/inspecting and servicing fire systems - including fire alarm, sprinkler, extinguishers, and other systems - to the prescribed standards; performing on-site emergency troubleshooting; programming and repairs of our customers fire alarm systems; identifying code and non-conformance issues; and preparing accurate and timely service tickets and reports. Skills/Qualifications: • 3+ year of experience in inspecting, servicing and troubleshooting fire alarms, • Familiar with NFPA codes, • High School Diploma or equivalent, • Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices, • Preferred: Level 1 Fire Extinguisher license from the state of CA, • Experience in reading and interpreting blueprints, submittals, and operational/product manuals, • Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs., • Ability to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc., • Ability to work flexible hours including weekends to meet customer requirements, • Demonstrate a high level of customer service, strong organization skills, and positive attitude, • Maintain truck inventory to ensure timely response to customer needs., • Ability to adhere to, implement, and follow safety guidelines and procedures at all times, • Possess a valid drivers license and driving record that meets company requirements, • Pass a pre-employment background check, • Perform other duties as assigned Benefits: Commercial Fire Protection is pleased to offer a compensation package which includes: Competitive hourly rate, company paid medical & dental, vision,401k, life insurance, paid time off and holidays, supportive team environment, iPad, company vehicle & gas card,tuition reimbursement, and career advancement opportunities. All qualified applicants to Commercial Fire Protection are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran's status or any other protected characteristic.

Job Description Labor One is hiring Laborers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for supporting mechanics in the accomplishing of production tasks, including the use of small mechanical and hand tools. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Comprehend basic instructions and general correspondence., 2. Be able to clearly communicate verbally to warn others of fire or other danger., 3. Possess the skills required of a Fire Watch., 4. Have experience using small power tools and hand tools in a production environment., 5. Be able to wear clothing appropriate for the task. No exposed jewelry shall be worn while working. Finger nails shall be short. Long hair shall be worn in pony tail or wrapped for protection and should not interfere with hard hat. Ability to wear PPE, especially respirators. DUTIES AND RESPONSIBILITIES 1. Arrive at the designated work site at the assigned time. End the shift as directed by the schedule and your supervisor or mechanic., 2. Work shifts and overtime as assigned the supervisor., 3. Comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 5. If assigned as a fire watch, carry out the duties of a fire watch as delineated in the Fire Watch Labor Category including having a fire watch training card at the work site at all times., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Warn other personnel of danger, or to evacuate, by verbal or other prearranged method of communication. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS INCLUDE: (May be required to demonstrate any or all requirements.) 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 - 30 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. work under the guidance of the Crane Operator and Tender. 1st Shift 40 Hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Preventative Maintenance Leadership: Drive the hotel’s preventative maintenance (PM) program with consistent completion of guestroom PMs, public-area PMs, kitchen/bar equipment PMs, and all mechanical/electrical system inspections. Document all work to maintain asset longevity and reduce emergency calls., • Mechanical & Equipment Maintenance: Complete basic to intermediate repairs on electrical, plumbing, HVAC, low-voltage systems, lighting, and in-room technology. Troubleshoot and maintain all back-of-house and guest-facing mechanical systems., • F&B Equipment Support: Maintain and repair bar equipment, refrigeration units, ice machines, dish machines, CO2 systems, soda lines, beer taps, water filters, and small wares used in the Moxy Bar and Room56., • Room & Public Area Care: Perform painting, drywall repairs, flooring touch-ups, furniture maintenance, and exterior upkeep to preserve hotel appearance and functionality., • Emergency Response & Safety: Identify and resolve safety hazards immediately (broken hardware, trip hazards, inoperable locks, fire-safety risks). Escalate critical deficiencies to the Chief Engineer., • Inventory & Supplies: Check and maintain stock levels for consumables such as filters, bulbs, CO2 tanks, ice machine chemicals, cleaning agents, and PM materials., • Project Collaboration: Partner with the Chief Engineer and hotel leadership to prioritize and complete room-care projects, capex-driven repairs, and operational improvement initiatives., • Reporting & Communication: Complete shift reports, PM logs, work order notes, and deficiency lists with accuracy and clarity. Maintain open communication with the engineering team and operations leaders., • Weather & Building Readiness: Assist with exterior upkeep (debris removal, drains, wind-related cleanup) as needed during adverse weather conditions. Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job Description City Wide Facility Solutions is on the lookout for a dynamic and team-player Senior Floor Technician to join our talented team. In this role, you will supervise and execute full cycle hard and soft floor maintenance activities, including daily, interim, and restorative care. The primary role is to participate in cleaning and treating carpets and upholstery, screening, tacking, and recoating hardwood floors (gym, stage, and dance floors), and stripping/top-scrubbing, burnishing and finishing vinyl composition tile (VCT), LVP, concrete, terrazzo, and other resilient flooring. The secondary role is verifying contract compliance, increasing client satisfaction, and working productively with Independent Contractors (IC). The Senior Floor Technician must be able to work independently and with others, in any type of facility including but not limited to; industrial, manufacturing, office, medical, retail, etc. The Senior Floor Technician must also be able to exercise good judgment in reporting client concerns to management and seeking the involvement of others in order to best meet clients’ needs. This is a full-time, Saturday - Wednesday, non-exempt position. The schedule is as follows: • Weekend (Saturday, Sunday): 8:00 am - 5:00 pm, • Weekday (Monday - Wednesday): 4:00 am - 1:00 pm This role offers a supportive environment with opportunities for professional development within City Wide, a leader in the building maintenance industry. Our Operations Team is growing, and you'll have incredible opportunities to grow with us! If you are self-motivated, goal-oriented, and a passionate team-player, we want to hear from you! PHYSICAL DEMANDS Senior Floor Technician is expected to perform duties throughout the day/night that include, but are not limited to: constant sitting, bending, standing, driving, phone use (call/text/email). Senior Floor Technician would also requires the ability to exert force of 50-100 lbs., occasionally; 25-50 lbs., frequently; 10-25 lbs. constantly. ENVIRONMENT While performing the duties of this job, a Senior Floor Technician is occasionally required to wear safety glasses, respirators, hearing protection and steel-toed work boots. As well as proper gowning to enter controlled environment rooms, such as clean rooms. Requirements • High school diploma or GED required, • Ten years of verifiable floor care experience, • Three years of prior experience in management; coaching, motivating, developing, and leading a team in multi-unit or locations., • Working proficiency in Spanish is required., • Strong planning, organization skills, and attention to detail., • Excellent communication and interpersonal skills., • Must be innovative and strive for continuous process improvement., • MS Office, Email, Internet skills required., • Knowledge of floor care trade practices and procedures., • Knowledge of carpet, hardwood, and VCT floor cleaning chemicals, solutions, and solvents., • Knowledge of federal, state, and local codes, regulations, and ordinances including National Fire Protection Association (NFPA), Occupational Safety and Health Administration (OSHA), Americans with Disabilities Act (ADA), etc., • Knowledge of respiratory protective equipment., • Ability to stay abreast of carpet, hardwood, and VCT floor cleaning techniques and preventive maintenance of equipment., • Ability to use and maintain hand, power, and truck-mounted tools., • Ability to pass OSHA physical examination for use of respiratory protective equipment., • Ability to obtain respirator certification., • Ability to wear respiratory protection and other personal protective equipment., • Ability to supervise and evaluate employees., • Ability to learn, develop, and apply work procedures., • Ability to plan and organize work., • Ability to meet predetermined deadlines., • Ability to perform strenuous physical work., • Ability to obtain applicable factory/manufacturer certifications., • Ability to safely move and relocate heavy objects., • Ability to work flexible hours for the efficient operation of the department., • Ability to work cooperatively with employees, contractors/vendors, outside agencies, and the public., • Ability to recognize and report hazards and apply safe work methods. City Wide Facility Solutions of San Diego offers a competitive compensation and career advancement opportunities. The role is a full time non-exempt in-person position. Benefits include 3% Safe Harbor 401k contribution, $650/month company contribution to health, vision, and dentalinsurance, and generous PTO and paid holiday plan. Base: $25-30/hour More on City Wide... City Wide Facility Solutions is a fast-growing company with over 100 franchise locations across the United States and Canada. Founded in 1961, City Wide Facility Solutions is the largest management company in the building maintenance industry. We have over 60 years in the business and continue to experience high growth and profitability across our franchise businesses. Our culture supports the company’s Mission to create a Ripple Effect by positively impacting the people and communities they serve. Read more about City Wide at

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development. ennRGX4KXh

Job DescriptionDescription: Status: Position Filled — Accepting Applications for Ready Replacement Pool (RRP) consideration. Prevailance is seeking an experienced, mission-focused professional to join the Center for Security Forces (CENSECFOR) as a Waterborne Security Boat Instructor. This is a high-risk instructor role, involving both classroom and operational training. Travel may be required. Key Responsibilities: • Deliver high-risk, group-paced instruction on security boat tactics, techniques, and procedures in both classroom and underway training environments, • Navy Instructor (9502) certification or equivalent, • Certified coxswain, • At least three (3) years of documented operational security boat driving experience in one or more of the following:, • Navy Harbor Security Maritime Detachment, • U.S. Navy Coastal Riverine Forces (CRF) Detachment, • U.S. Navy Special Warfare Combatant Crewman (SWCC), • USCG Shore-Based Boat Unit or Maritime Patrol Forces operating Fast Response Cutters (FRC), Patrol Boats (WPB), or Coastal Patrol Boats (CPB), • Tactical and Leadership Experience: Minimum of three (3) years in a maritime environment with a strong background in tactical operations, boat maintenance, and Navy Force Protection boats, • Coxswain Skills: Experience with launch and recovery, open water and confined space maneuvering, high-speed tactical maneuvers, towing, and VBSS operations, • Maritime Navigation Proficiency: Skilled in maritime navigation, including knowledge of aids to navigation, rules of the road, and plotting on nautical charts, with the ability to navigate at night, • Small Boat Tactical Operations: Proficient in team organization, multi-craft formations, patrols, MIO support, live fire operations, and escort missions, with experience in risk assessments using the ORM process, • Experience in logistical movement and transportation of small craft and associated gear for over-the-road and hoisting operations, • Tactical operations planning experience using military decision-making processes, including mission coordination, concept of operations, and mission debriefing Prevailance, Inc. proudly supports veterans as a member of the V3 (Virginia Values Veterans) program and the Hire Vets initiative. Recognized as a Top Workplace in 2025, Prevailance fosters a supportive, mission-driven environment for its team members. We provide a comprehensive benefits package to eligible employees, designed to support health, wellness, and financial security. Our benefits include: • Medical Insurance, • TriCare Supplemental, • Dental Insurance, • Vision Insurance, • Life & Accidental Death & Dismemberment (AD&D) Coverage, • 401(k) Plan with Company Matching Contributions, • Paid Time Off (PTO), • 11 Paid Holidays, • Education Reimbursement Program

Job Description MVE + Partners designs influential and award-winning projects throughout the world. Our practice is diverse with an eclectic portfolio of successful architecture, planning, and interior design assignments. Our team comprises a talented group of individuals, equally entranced by art, fashion, technology, business, education, sports, food, and above all – design. GENERAL SUMMARY: MVE + Partners designs influential and award-winning projects throughout the world. Our practice is diverse with an eclectic portfolio of successful architecture, planning, and interior design assignments. Our team comprises a talented group of individuals, equally entranced by art, fashion, technology, business, education, sports, food, and above all – design. Role: • Establish project objectives and specify the strategies and actions to achieve them; responsible for deliverables outlined in the scope, • Manage project team, assigning staff, mentoring staff, and making authoritative decisions and recommendations of significant impact related to project, • Establish, facilitate, and/or participate in both client and internal meetings; Interface with clients throughout each project and manage relationships to ensure customer satisfaction, • Handle Construction Administration including site visits, RFIs, Change Orders, RFCs, etc., • Coordinate workload through design development and construction document phases to complete documents on schedule Review architectural documents for areas of conflict with all disciplines, • Prepare and review all construction documents for accuracy; coordinate documents with internal team members and external consultants, • Demonstrate and utilize working knowledge of lighting, HVAC, structural, plumbing, fire protection, and electrical design as well as of relevant codes, • Coordinate the submission of documents to the building department and manage construction administration (RFIs, RFPs, shop drawings, submittals, etc.), • Maintain an awareness and understanding of project schedules, design fees, project budgets, reimbursable costs, etc. while adhering to pricing strategy agreed upon by client and contractors, • Exude a collaborative and positive attitude in working with the Production Team and foster an atmosphere for learning and professional growth, • Maintain, organize, and archive project files during and at the close of a project, • Perform administrative functions as needed, including managing project via Deltek Requirements: • Degree in Architecture from an accredited institution or equivalent experience, • Licensed Architect in California; NCARB Certified preferred, • Minimum of 12 years of experience in a professional office setting including multi-family residential, • Advance proficiency in Revit, (required) AutoCAD, SketchUp, Photoshop, and Microsoft Office; a Revit test will be administered prior to hire, • Strong listening, oral/verbal and written communication, time management and organizational skills required, • Skilled in identifying complex problems and reviewing related information to brainstorm and formulate alternatives, • Rich benefits plan that includes medical, dental, vision, and FSA, • 401(k) and financial planning, • Professional Development including Architectural Licensure Support and Reimbursement, • Continuing Education opportunities, including regular Lunch & Learns, • Internal Career Pathing and Mentoring Support, • 9 paid holidays, paid sick and vacation time To Be Considered for This Position: Use the link to apply - a cover letter, resume and portfolio are required. Can be attached separately. No portfolio links are accepted. Please note: Due to the number of applications we receive, we are only able to respond to those candidates whom most closely match our requirements. For additional career opportunities, please visit our Careers page at the following link:

Job DescriptionLooking for resumes to place in proposals. Should the proposal(s) be successful, then we will discuss terms for hiring. The resumes are for the following positions: • Civil Engineer, PE, • Structural Engineer, PE, • Mechanical Engineer, PE, • Fire Protection Engineer, PE, • Electrical Engineer, PE, • Environmental Engineer, • Cost Engineer, CCE or CCC, • Security Engineer, • Controls Engineer, • Weapons Safety Engineer This is a remote position.

Job Description Mechanical Engineer - MEP Consulting • BS in Engineering, physics or applied mathematics, • 2+ years experience working for an architect, consulting firm or design-build contractor, • EIT / PE preferred, • Proficient with Revit MEP and AutoCAD, • Experience with design and coordination of complex HVAC / mechanical systems, • Knowledge of plumbing and fire protection systems, • Energy modeling experience is a plus

Job Description This position requires an individual who is self-motivated and able to work independently. Duties will include managing and designing projects from concept through construction, coordination with the client, utilizing and coordinating internal resources. You will also be responsible for leading and helping to further grow our local office and Electrical Engineering Department, as well as participate in business development activities for the company. Entry-level Engineers: • BS in Electrical Engineering or Architectural Engineering, • 1-3 years minimum experience, • EIT preferred but not required, • LEED Accreditation a plus, • Proficient with Revit MEP and AutoCAD, • Knowledge of building, plumbing and fire protection systems, • Strong verbal and written communications skills, • Internship with MEP company a plus, • BS in Electrical Engineering, • PE Preferred but not required

Job DescriptionCompany Description At Coffman Engineers, we serve as both prime consultant and sub consultant on projects large and small, including commercial, retail, institutional, government, industrial, and project/construction management. Incorporated in 1979, we have employees in more than 23 locations serving clients across the United States and overseas. To meet client objectives and to integrate our many disciplines, we can create teams comprised of civil, structural, mechanical, electrical, fire protection, and corrosion control, as well as project/construction managers and professionals in a variety of specialty services. This ability has made us a leader in the engineering and construction communities, and has strengthened our reputation as being progressive, innovative, and a great place to work. Job Description Compensation and Benefits: • Expected Base Salary: $100,000.00 to $150,000.00, depending on education, experience, and licensure., • Paid overtime at 1.0 times hourly rate., • Competitive end-of-year discretionary bonus based on company/team/personal performance., • Hybrid work schedule (subject to change)., • Perform and may oversee structural analysis, design, and detailing on a variety of projects., • Collaborate with the architect, owner, and contractor to provide a well-coordinated and high-quality set of structural drawings., • May lead a team of engineers, designers, and drafters to execute structural designs., • Meet with the project team to ensure effective communication flow during design., • Interest and ability to advance to a senior engineer or project manager position.Qualifications KNOWLEDGE, SKILLS & ABILITIES • Experience with computer analysis software systems., • Excellent leadership, supervisory, and writing and verbal communication skills., • Comfortable consulting to architectural practices., • Ability to build and maintain a strong team of professionals and support staff within a cooperative multidiscipline office performing at a high level of satisfaction to clients., • Possess strong critical thinking, organizational, and analytical abilities., • B.S. degree in Civil or Structural engineering required., • Master’s degree in structural engineering preferred., • Minimum of 5 years of professional experience with the structural design of buildings or similar structures., • Registration as a P.E. required. This position is not eligible for sponsorship. Additional Information Why You Want To Work Here Coffman Engineers is a company that truly focuses on its employees. We support and encourage individually tailored professional and technical advancement as well as personal growth. We offer an excellent salary/benefits package, a desirable location, and a professional office environment with the opportunity to work with a collaborative team. Our offices provide several engineering discipline services, which work together collaboratively to provide complete engineering design packages. Coffman offers a flexible schedule and this position may be eligible for PTO, a fun office environment with a high-performing team and a fully stocked kitchen! We welcome the dedicated and the driven. Join us. Don’t take our word for it. Check out what others are saying: Coffman at a Glance: • 46 years in business, • 850+ employees serving clients throughout the U.S. and overseas from more than 23 locations, • Multi-discipline engineering services plus corrosion control, commissioning and project/construction management, • Zweig Group Hot Firm List, Zweig Group, 2021, • Top 500 Design Firms, Engineering News-Record, 2022, • Top Workplace (Small), The San Diego Union-Tribune, 2020, 2021, 2022, 2023, 2024, • Best Places to Work (Large), San Diego Business Journal, 2021, 2022, 2023, 2024, 2025 You must apply online for this position. If you are unable to complete our online application process, or if you need assistance to do so, let us know so we can provide reasonable accommodation. If you are experiencing problems applying through our system, please try again using a different browser or an updated version of your current browser. If that doesn't work, please contact us directly. This position is direct with Coffman Engineers; we are an Equal Opportunity Employer. We do not discriminate on the basis of any status protected under federal, state, or local law. Follow Us! Twitter: @CoffmanEngineer Instagram: @CoffmanEngineers LinkedIn: Facebook: @CoffmanEngineers

Job DescriptionCompany Description CRB's nearly 1,400 expert professionals drive innovative, life-changing and life-saving solutions for manufacturers in the life sciences and food and beverage industries. Our mission, vision, and core values put client satisfaction and employee experience at the center of everything we do. As an AEC firm, we proudly specialize in industries that inherently carry important social responsibility - we recognize our impact and influence in the communities we serve and pursue corporate responsibility through the lens of people, community, and planet. From oncology and rare disorders to COVID-19 or alternative proteins, our design and construction projects are pioneering solutions addressing important issues such as food scarcity and global health. Job Description We are actively seeking a Mechanical Engineer Intern to join CRB. Join our firm for an internship journey where you’ll dive into real-world project work, learn from industry leaders and fully immerse yourself in the CRB employee experience. This program is more than just an internship—it's an opportunity to grow, innovate, and make a tangible impact on how we do business. You’ll have the chance to work hands-on with cutting-edge projects, collaborate with peers and industry leaders, and contribute your unique perspective to spark meaningful change. At CRB, we believe that learning should be as dynamic as it is engaging, and that work can be both challenging and enjoyable. Join us to expand your horizons, build lasting relationships, and experience what it truly means to be part of a team that’s dedicated to innovation and excellence. How will I contribute? As a Mechanical Engineer Intern, you will work under the direction of an assigned mentor to develop and implement project deliverables. Mechanical Interns focus on the design and engineering of HVAC, mechanical utility, plumbing, fire protection, and other building support systems into the built work environment. Typical tasks and deliverables include load calculations, utility assessments, energy modeling, design reports, code evaluations, plans, schedules, installation details, specification and coordination with manufacturers and trade partners. Tasks will include utilizing computer aided drafting and engineering software. Core Responsibilities • Developing project documents (e.g., calculations, reports, construction drawings and specifications, etc.) for clients in coordination with regulatory bodies and industry standards., • Assisting with development of conceptual designs and coordinating with the design team under direction of the project team lead., • Coordinating with multiple disciplines and other internal and external team members (e.g., vendors, clients, and contractors).Qualifications Qualifications: • Currently pursuing a Bachelor's or Master's degree in Mechanical Engineering or Architectural Engineering from an accredited program, • Available to work full-time during the internship period: May–August 2026, • Proficiency in Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, OneNote), • Strong interest in the Food & Beverage or Life Sciences industries, • Excellent problem-solving skills with the ability to analyze complex data and develop actionable insights, • Strong communication and collaboration skills, with the ability to work effectively across disciplines and with internal and external stakeholders (vendors, clients, contractors), • Eagerness to learn about the AEC industry and apply academic knowledge to real-world engineering applications, • Experience with HVAC systems strongly preferred, • Working towards Fundamental of Engineering Exam registration or completion preferred, • Familiarity with AutoCAD, Revit, and 3D collaboration tools (Navisworks, BIM360 Suite, Assemble), • Familiarity with industry-specific regulations and standards within the AEC industry, • Prior internship or co-op experience in Mechanical Engineering or related field Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job DescriptionDescription: Davenergy Solutions is a rapidly growing, profitable company, headquartered in San Diego, CA. Our employees are the key to maintaining our competitive edge. To attract and retain the best industry talent Davenergy Solutions shares its success with its employees and is committed to providing a professional work environment where learning, growth and recognition are highly valued. If you are seeking an opportunity to work in a progressive organization that will offer you diversified challenges and an excellent opportunity for advancement, please review our current employment opportunities. For more information about Davenergy Solutions and open positions please visit our website at . Position Description: We are seeking a full-time Revit Modeler/Drafter to join our dynamic and growing mechanical, electrical, and plumbing (MEP) engineering consulting team. The Revit Modeler/Drafter will be tasked with creating and editing MEP Revit and CAD files for design projects and supporting project closeout as-builts. Candidate should have experience performing piping, ductwork, or electrical sizing and coordinating with Architectural, structural, and fire protection sub consultants. All final products Revit and/or CAD files must conform with client CAD standards. To ensure that the correct and or appropriate title block, plotting style (CTB file), layers, line types (LIN file), symbols, scaling, and annotation/text formatting and naming standards are followed. Requirements: Responsibilities: • Create a functioning BIM/REVIT model of new design projects within existing facilities., • Creating and revising MEP Revit Models or CAD files in support of MEP design projects within existing facilities., • On-Site CAD verification/site walks, • Consolidating the existing as-built documentation and creating a working Revit model., • 5 years CAD experience and a minimum of 1 year of BIM/Revit experience., • Have proven experience and be well versed working in and updating Revit/BIM files that contain up to several hundred files and cross-references., • Ability to use various software programs to update and produce work products by computer., • Ability to communicate effectively both verbally and in writing., • Ability to utilize a variety of software programs to monitor, update, and produce work products by applying knowledge of computer literacy., • 401(k), • Annual Profit-Sharing contribution to 401(k), • 10 Paid Federal Holidays, • Health Insurance, • Dental Insurance, • Accident Coverage, • Vision Insurance, • Short Term Disability, • Long Term Disability, • Term Life Insurance, • Medical Bridge, • Critical Illness

Job Description $27.70 Per Hour The Environmental Health & Safety (EH&S) Coordinator implements and monitors industrial environmental, health, and safety programs. The EH&S Coordinator also ensures the workforce is trained and performs industrial operations in accordance with federal, state, and local regulatory laws and regulations, provides regulatory consultation to the production workforce, performs audits and inspections of work processes and industrial equipment and compliance assurance, reports non-compliance or hazardous conditions found and, recommends effective action. This individual also conducts investigations into unplanned events regarding emergencies including but not limited to injuries, hazardous materials, spills, or fire and smoke incidents, while creating and disseminating comprehensive reports of the investigation to management and contractual oversite. Requirements Must be able to recognize, evaluate, and control occupational safety hazards as well as enforce company safety procedures, rules, and assist in educating employees in the area of work and personal safety • Must have knowledge of applicable regulations and US Navy Standard items, • Must have excellent written and oral skills; able to communicate effectively with all levels of the workforce, • Must be proficient in the use of PCs and word processing, spreadsheet, presentation, desktop applications, and electronic mail programs, • Must be a certified OSH 5400 Instructor, • Must be able to work any shift, • Must be a US Citizen CTS offers a comprehensive benefit packet to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Description Labor One is hiring Firewatch for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for fire prevention and fire protection at the assigned work site. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Comprehend basic instructions and general correspondence., 2. Be able to clearly communicate verbally to warn others of fire or other danger., 3. Understand the hazards associated with fixed and portable fire protection systems and the manner in which the systems are activated., 4. Understanding of proper use and care of fixed and portable fire protection systems., 5. Understand the Shipyard Competent Person Report, and where to find it., 6. Know the types of fire, the materials involved, and the type of fire extinguisher needed to suppress the fire., 7. Possess a Fire Watch training card., 8. Be able to wear clothing appropriate for the task. No exposed jewelry shall be worn while working. Finger nails shall be short. Long hair shall be worn in pony tail or wrapped for protection and should not interfere with hard hat. Ability to wear PPE, especially respirators. DUTIES AND RESPONSIBILITIES 1. Have Fire Watch Training card with them at all times in the shipyard., 2. Carry out Fire Watch procedures to protect personnel and customer and BAE property from fire damage., 3. Ensure that designated hot work area is clean and free of combustible materials before hot work commences., 4. Keep your work area clean and safe at all times, especially at the end of the shift., 5. Warn other personnel of danger, or to evacuate, by verbal or other prearranged method of communication., 6. Show initiative and ownership of work and work area., 7. Adhere to all safety rules and good work ethics. Be accountable for completion of work assignments., 8. Arrive at the designated work site at the assigned time. End the shift as directed by the schedule and your supervisor or journeyman., 9. Work shifts and overtime as assigned the supervisor., 10. Comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 11. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. Work Tasks Include: a) Ensure that designated hot work area is clean and free of combustible materials before hot work is started. b) Carry an appropriately rated fire extinguisher to the assigned watch area. Make certain the fire extinguisher is in operable shape and not discharged prior to allowing hot work to start. c) Notify the person accomplishing the hot work if it is safe to proceed and when there is danger. d) Suppress fires when they occur. e) Report any uncorrected unsafe condition or working habits to the journeyman and supervisor. f) Assist with the hot work procedure and audits process making certain hot work notifications are in place and valid before hot work commences. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS INCLUDE: (May be required to demonstrate any or all requirements.) 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 - 30 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head). 6. Good balance while working on uneven surfaces and maneuvering obstacles., 6. Sufficient handgrip and coordination to carry and operate tools and equipment., 7. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 hours per week; Overtime with supervisor approval. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description We are currently searching for a qualified and reliable Maintenance Supervisor to lead our maintenance department. As the Maintenance Supervisor, you will be responsible for managing all repair and upkeep operations of our company’s facilities. Your duties will include maintaining machinery, planning repair activities, and developing maintenance procedures. Our ideal candidate will demonstrate a good understanding of maintenance machinery and equipment, as well as outstanding written and verbal communication skills, while overseeing the chlorine and acid filling processes, which requires a strong and diverse technical skill set. The ideal candidate must demonstrate hands-on experience and proficiency in the following core areas: Responsibilities: • Supervise and lead all maintenance processes and operations., • Track expenses and oversee the budget for maintenance., • Maintain all machinery to ensure its at working standards., • Create and implement maintenance procedures., • Conduct regular inspections of the facilities to detect and resolve problems., • Plan and manage all repair and installation activities., • Ensure all department workers adhere to the safety policies and procedures., • Assign repair schedules and evaluate repair cost estimates., • Document and prepare daily progress reports and maintenance logs., • Oversee equipment stock and place orders for new supplies when necessary., • Maintain production chemical manufacturing and product packaging equipment and fixtures to aid production of machined parts, • Conduct mechanical and electrical fabrication, assembly, and integration of manufacturing and packaging equipment, • Maintain, company maintenance software program as well as inventory of parts, • Ensures that all work performed meets required codes (OSHA, City and Federal) and is in accordance with plant policies and procedures., • Responsible for providing coverage in the absence of other Maintenance Technicians., • Be able and willing to work in non-ideal environments such as: confined spaces, working at heights, dusty/dirty and around chemicals., • High School Diploma or equivalent qualification., • Certification or proven experience in Facility Management or similar field is preferred., • A minimum of 5 years’ experience in maintenance, • Preventive Maintenance: Proven experience in implementing and managing preventive maintenance programs to ensure equipment reliability and safety., • Plumbing and High-Pressure Systems: Skilled in the installation, maintenance, and troubleshooting of plumbing systems, including high-pressure pumps and fluid transfer systems., • Electrical Skills: Strong knowledge of both single-phase and three-phase electrical systems, including safe troubleshooting and installation practices., • Electronic Troubleshooting: Ability to diagnose and repair electronic control systems and instrumentation., • Mechanical & Transmission Systems: Understanding of mechanical operations, gearboxes, drive systems, and the ability to perform related repairs., • Conveyor Belt Systems: Skilled in the maintenance, adjustment, and repair of automated conveyor systems used in chemical or industrial environments., • Good understanding of the technical features of plumbing, carpentry, and electrical systems., • Strong knowledge facilities machines and equipment., • Basic understanding of electrical control systems with ability to troubleshoot, diagnose, and repair basic electrical wiring and control circuits, • Physical stamina and strength to lift heavy items, • Background in chemical manufacturing & liquid packaging is preferred with computer skills, • Experience on welding and fabrication., • Hands on experience on preventive maintenance strategies and implementation., • Experience on mechanical systems troubleshooting and repair., • Electrical systems knowledge and expertise., • Welding: Proficient in various welding techniques for fabrication, repair, and structural support. Ability to perform general carpentry work for facility maintenance and equipment housing.

Job DescriptionCompany Description CRB's nearly 1,400 expert professionals drive innovative, life-changing and life-saving solutions for manufacturers in the life sciences and food and beverage industries. Our mission, vision, and core values put client satisfaction and employee experience at the center of everything we do. As an AEC firm, we proudly specialize in industries that inherently carry important social responsibility - we recognize our impact and influence in the communities we serve and pursue corporate responsibility through the lens of people, community, and planet. From oncology and rare disorders to COVID-19 or alternative proteins, our design and construction projects are pioneering solutions addressing important issues such as food scarcity and global health. Job Description The Mechanical Engineer is an entry-level position and performs their job functions under the direct supervision of a project’s Engineer-of-Record and/or Lead Mechanical Engineer. Mechanical engineering focuses on the design and engineering of HVAC, mechanical utility, (plumbing, fire protection), and other building support systems into the built work environment. Typical tasks and deliverables include load calculations, utility assessments, energy modeling, design reports, code evaluations, plans, schedules, installation details, specification and coordination with manufacturers and trade partners. Tasks will include utilizing computer aided drafting and engineering software. Qualifications Minimum Qualifications * ABET-accredited Bachelor’s degree in Mechanical Engineering (alternatively, a Bachelor’s in Architectural Engineering with Mechanical Option) * 0 to 3 years of experience, preferably in a design firm setting * Fundamentals of Engineering Exam registration or completion preferred Additional Qualifications * Proficiency AutoCAD and Revit preferred * LEED, WELL, or other sustainable design accreditation or pursuit preferred * Fundamental experience with performing engineering calculations, and developing and implementing of HVAC, mechanical utility, and piping systems designs required * Fundamental experience with the discipline code, generically stated preferred * Fundamental experience conducting field surveys of existing conditions and support of field reporting required * Proficient with fundamental internal cross-discipline project team coordination preferred * Proficient at fundamental discipline design calculations under the supervision of an engineer Responsibilities * Interface with client and external partners required * Support the basic design and lay-out of mechanical systems in conformance with code requirements and will help coordinate the design with other disciplines * Assist in the preparation of deliverables and specific project work may include all levels of design such as studies, conceptual and schematic design, design development, construction documentation, and construction administration. * Conducts basic field investigations to integrate the design with existing systems and structures * Work closely with other architects, engineers, and designers, as well as other internal and external team members to ensure a coordinated, constructible, and complete design * Works on matters of fundamental and basic complexity in a support role under the direction of more experienced engineers and designers * Expected to self-check one’s own work * May work on one or more projects simultaneously as directed by a supervisor Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job Description Summary Are you a Project Engineer with 2-5 years of experience looking to grow your career? Our client, in San Diego, stands as a provider of professional engineering services to a broad range of markets, including higher education, healthcare, ports/harbors, industrial, entertainment, commercial, laboratories, municipal, and federal sectors. Our specialties include electrical, mechanical, plumbing, fire protection, and technology integration. Our offered services range from engineering and commissioning to construction management. With over 300 dedicated employees, they are an internationally recognized leader in many of the key markets we serve. They provide a blend of innovation and technical excellence in delivering green solutions that enhance and sustain the built, natural, and social environment. Duties and Responsibilities • Provide on-site technical and administrative support for construction activities., • Review and process RFIs and submittals promptly and accurately., • Track all project documents in logs and files. Maintain and update all project tracking logs consistently., • Update project plans with RFIs and supplemental instructions to ensure accurate documentation., • Assist the CM with estimating and processing change orders, including independently reviewing contractor mark-ups, checking math, verifying scope, and preparing change orders., • Provide technical and administrative support to the CM as needed., • Review design drawings to ensure compliance with project requirements., • Review certified payroll, fringe benefits, and hourly rate worksheets., • Fully manage the close-out and turnover process to ensure a seamless project handoff., • Oversee daily site operations to ensure work is performed according to project specifications and schedules., • Monitor contractor performance and adherence to safety protocols and quality standards., • Conduct regular site inspections to verify progress, identify potential issues, and recommend corrective actions., • Coordinate and facilitate site meetings between contractors, subcontractors, and the project team to resolve on-site concerns., • Maintain accurate and detailed site logs, including daily reports, weather conditions, and contractor activity., • Support enforcement of site-specific environmental and safety compliance., • Provide real-time updates on the CM's on-site activities and potential risks., • Assist in managing the punch list process, including coordinating with contractors to address outstanding items Qualifications & Requirements • Bachelor's Degree in Construction Management, Building Construction, or related field preferred, • 2+ years Minimum experience in the construction industry as a project engineer or similar, • Solar / PV experience is a plus, • Electrical experience is preferred but not required, • Prior experience working for a general contractor is a plus, • Excellent communication skills and professional attitude, • The position is on-site, in-person only, • Field experience managing a contractor is preferred Benefits Upon eligibility, some of the benefits offered include: • 13 Observed Company Paid Holidays a year, • Medical, Dental, Vision Plans, • Employer-paid Group Life Insurance, • Supplemental Insurance Plans such as Accident, Critical Illness, and Pet Insurance, • Tuition & Training Assistance, • 401(k) program offers immediate vesting and employer match is 100%, not exceeding 4% of employee compensation

Job Description Summary Are you a Project Engineer with 2-5 years of experience looking to grow your career?Our client, in San Diego, stands as a provider of professional engineering services to a broad range of markets, including higher education, healthcare, ports/harbors, industrial, entertainment, commercial, laboratories, municipal, and federal sectors. Our specialties include electrical, mechanical, plumbing, fire protection, and technology integration. Our offered services range from engineering and commissioning to construction management. With over 300 dedicated employees, they are an internationally recognized leader in many of the key markets we serve. They provide a blend of innovation and technical excellence in delivering green solutions that enhance and sustain the built, natural, and social environment. Duties and Responsibilities • Provide on-site technical and administrative support for construction activities., • Review and process RFIs and submittals promptly and accurately., • Track all project documents in logs and files. Maintain and update all project tracking logs consistently., • Update project plans with RFIs and supplemental instructions to ensure accurate documentation., • Assist the CM with estimating and processing change orders, including independently reviewing contractor mark-ups, checking math, verifying scope, and preparing change orders., • Provide technical and administrative support to the CM as needed., • Review design drawings to ensure compliance with project requirements., • Review certified payroll, fringe benefits, and hourly rate worksheets., • Fully manage the close-out and turnover process to ensure a seamless project handoff., • Oversee daily site operations to ensure work is performed according to project specifications and schedules., • Monitor contractor performance and adherence to safety protocols and quality standards., • Conduct regular site inspections to verify progress, identify potential issues, and recommend corrective actions., • Coordinate and facilitate site meetings between contractors, subcontractors, and the project team to resolve on-site concerns., • Maintain accurate and detailed site logs, including daily reports, weather conditions, and contractor activity., • Support enforcement of site-specific environmental and safety compliance., • Provide real-time updates on the CM's on-site activities and potential risks., • Assist in managing the punch list process, including coordinating with contractors to address outstanding items Qualifications & Requirements • Bachelor's Degree in Construction Management, Building Construction, or related field preferred, • 2+ years Minimum experience in the construction industry as a project engineer or similar, • Solar / PV experience is a plus, • Electrical experience is preferred but not required, • Prior experience working for a general contractor is a plus, • Excellent communication skills and professional attitude, • The position is on-site, in-person only, • Field experience managing a contractor is preferred Benefits Upon eligibility, some of the benefits offered include: • 13 Observed Company Paid Holidays a year, • Medical, Dental, Vision Plans, • Employer-paid Group Life Insurance, • Supplemental Insurance Plans such as Accident, Critical Illness, and Pet Insurance, • Tuition & Training Assistance, • 401(k) program offers immediate vesting and employer match is 100%, not exceeding 4% of employee compensationEmployment Type: Full time Location: San Diego, CA

Job Description In business for over 50 years, a global leader in fire protection and suppression is hiring several experienced Fire Alarm & Suppression Technicians, and Fire Sprinkler Fitters for multiple branches across the USA. WHY YOU WANT TO WORK HERE: • Stable Year-Round Work, • Above Market Compensation, • PTO, • Paid Training & Certifications, • Work Life Balance, • Career Growth Opportunities Working out of a company vehicle you are able to take home, Fire Alarm Techs will inspect, troubleshoot, service, and repair a variety of fire alarm systems (i.e. Notifier, Fire Lite, Silent Knight, Kiddie etc.), emergency lighting systems, perform hydrostatic testing of low-pressure cylinders, fire extinguisher repairs and filling (i.e. Oval, Amerex); completing documentation of work performed using a tablet; other related duties as required. SHIFT: Days, 8:00am – 4:00pm (Monday – Friday). OT after 40 hours. Minimal on-call COMPENSATION & COMPANY PERKS: • $45.00 - $60.00/hour+++, paid weekly through direct deposit, • Annual Performance Bonus, • 100% Company Paid Benefits Package after 3 months (Health, Dental, Medical, Health Spending Account, STD/LTD, Life Insurance); choice of 3 levels of package, • $200 Perscription Safety Glasses, • Matching 5% 401k after 3 months, • Deferred Profit Sharing Programs after one year, • Annual $250 Wellness Account, • PTO (2 Weeks Vacation, Stat Holidays, 5 SIck Days, 2 Floating Days), • Company Provided Vehicle to Take Home + Gas Card, • Cell Phone + Tablet, • Paperless Reporting, • Ongoing Paid Training & Tuition/Course Reimbursement, • Employee Discounts, • Company Provided Uniform, • Annual $250 Safety Boot Allowance, • Career Growth Opportunities FIRE ALARM TECHNICIAN JOB SKILLS & QUALIFICATIONS · NICET Certification · 3-5 years service, inspection, and installation experience with fire alarm systems, emergency lighting, and/or fire extinguishers · Solid electrical troubleshooting skills · Any trade related certifications/licenses considered a strong asset but not required · Valid driver’s license and clean driving record · Ability to pass pre-employment background checks (MVR and Drug Testing) CONTACT: If you have any questions, call/text Jacquie at 1 833 482 2562 or email at .

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices all over the country. We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of Outside Machinists to join our team in San Diego, CA. Pay Rate: $25-35/hour Responsibilities: • Install equipment on naval vessels in a safe and productive manner., • Disassemble, fault find, repair and reassemble shipboard equipment as directed by the supervisor., • Inspection of work, identification of potential problems, initiation of corrective actions., • Increase awareness of quality procedures within department, • Ensure adherence to correct work procedures., • Continuously improve communications and flexibility within the team., • Contribute to innovation/productivity improvements., • Read technical bulletins and diagrams in relation to work being performed., • Work towards the team goal of delivering the vessel on time., • Minimum 2 years of shipyard or Naval (machinist mate) experience., • DBIDS eligibility required., • Must have reliable/own transportation., • Must be fire watch certified., • 11 panel Drug Screen, • Comfortable with heights, • Lift 50lbs without assistance, • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required., • Strong mechanical aptitude required., • Knowledge of ship terminology required., • Proven ability to interpret engineering drawings., • Demonstrated ability to safely operate all fixed and non-fixed machinery., • Ability set up machinery to meet flatness tolerance requirements., • Demonstrated ability to interpret job specifications., • Ability to perform work on marine vessels., • Must be able to follow directions and work with limited supervision. CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices all over the country. We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of First Class Outside Machinists to join our team in San Diego, CA. Pay Rate: $41/hour Responsibilities: • Install equipment on naval vessels in a safe and productive manner., • Disassemble, fault find, repair and reassemble shipboard equipment as directed by the supervisor., • Inspection of work, identification of potential problems, initiation of corrective actions., • Increase awareness of quality procedures within department, • Ensure adherence to correct work procedures., • Continuously improve communications and flexibility within the team., • Contribute to innovation/productivity improvements., • Read technical bulletins and diagrams in relation to work being performed., • Work towards the team goal of delivering the vessel on time., • Minimum 2 years of shipyard or Naval (machinist mate) experience., • DBIDS eligibility required., • Must have reliable/own transportation., • Must be fire watch certified., • 11 panel Drug Screen, • Comfortable with heights, • Lift 50lbs without assistance, • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required., • Strong mechanical aptitude required., • Knowledge of ship terminology required., • Proven ability to interpret engineering drawings., • Demonstrated ability to safely operate all fixed and non-fixed machinery., • Ability set up machinery to meet flatness tolerance requirements., • Demonstrated ability to interpret job specifications., • Ability to perform work on marine vessels., • Must be able to follow directions and work with limited supervision. CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Description Job title Nurse Practitioner – Family Medicine (Tagalog Speaker) Reports to Medical Director Department: Medical Status: Full-Time (Exempt) Locations: National City, 2743 Highland Avenue, National City CA 91950 The Organization Operation Samahan (OpSam Health) is a Federally Qualified Health Center (FQHC) that serves the San Diego County community. It was founded in 1973 in a barber shop in Downtown San Diego by Filipino health professionals offering services to immigrants who did not have the finances, linguistic skills, or ability to navigate the health care system. Today, Operation Samahan has evolved into a diverse community health center with services available in National City, Mira Mesa, City Heights, and Rancho Penasquitos. We provide primary care, dental, behavioral health, family planning, integrative health and wellness, healthy eating, civic engagement, and other health-related services to the uninsured, underinsured, and underserved families of all income levels, regardless of their ability to pay. JOB PURPOSE As a Nurse Practitioner at a Federally Qualified Health Center (FQHC), you will be an integral part of the healthcare team, working under the guidance of the Medical Director. Your role involves providing comprehensive direct patient care services to individuals of diverse backgrounds and needs. This includes conducting thorough assessments, diagnosing illnesses, developing treatment plans, and prescribing medications when necessary. Additionally, you will play a crucial role in preventive care, health promotion, and patient education. Your dedication to compassionate, evidence-based practice will significantly fulfill Opsam Health's mission of providing accessible, high-quality healthcare to underserved populations. ESSENTIAL DUTIES AND RESPONSIBILITIES • Perform comprehensive health screenings of patients of all ages., • Provides health care services to patients with acute and chronic medical conditions., • Order and review diagnostic and laboratory tests and refer patients to specialists as appropriate., • Complete progress notes in the electronic health record system in a timely manner., • Follow Opsam Health policies., • Keep abreast of current evidence-based medical knowledge., • Maintains minimum productivity requirements as set by the organization., • Maintains satisfactory peer and performance reviews., • Participate in quality improvement projects., • Performs other duties as assigned. QUALIFICATIONS • Valid Registered Nurse (RN) license and Family Nurse Practitioner (FNP) certification in the state of California., • Bilingual in Tagalog/English preferred, • Master's degree in nursing (MSN) from an accredited program with a focus on family practice., • Current DEA and BLS certificates are required., • Minimum of 1 year of experience as a Family Nurse Practitioner in a primary care or family practice setting., • Strong knowledge and proficiency in primary care, including health assessment, diagnosis, treatment, and patient education., • Must be COMFORTABLE with all age groups. Quality Management: • Display knowledge of typical signs of human development and ability to assess and provide age-appropriate clinical care., • Contribute to the organization's success by participating in quality improvement activities. Customer Relations: • Respond promptly and with caring actions to patient care needs. Acknowledge psychosocial and cultural beliefs., • Maintain professional working relationships with all levels of staff, patients and the public., • Be part of a team and cooperate to accomplish department goals and objectives. Safety: • Maintain current knowledge of policies and procedures as they relate to safe work practices., • Follow all safety procedures and report unsafe conditions., • Use appropriate body mechanics to ensure an injury-free environment., • Be familiar with the location of the nearest fire extinguisher and emergency exits., • Follow all infection control procedures, including blood-borne pathogen protocols. Privacy Protection & HIPPA Compliance: • Maintain privacy of all patients, employees, and volunteer information and access such information only on a need-to-know basis for business purposes., • Comply with all regulations regarding corporate integrity and security obligations. Report unethical, fraudulent, or unlawful behavior or activity. OTHER DUTIES This job description is not designed to cover or contain a comprehensive listing of the activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. 44 Salary: $70.00 - $90.00

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Training & development, • Tuition assistance SILTT is searching for a dynamic and highly motivated Site Security Guard responsible for providing continuous protection and monitoring of a Network Operations Center (NOC) facility to ensure the safety of personnel, assets, and information systems. Operating within a mission-critical environment, the Security Guard enforces access control, conducts perimeter patrols, monitors CCTV systems, and responds to alarms or security incidents according to established procedures. This position plays a key role in maintaining a secure operating environment for the NOCs 24x7 network operations. If you are excited by the opportunity to join our team as a Site Security Guard, we encourage you to apply today! WHO WE ARE: At SILTT were pushing the limits of infrastructure innovation in the Telecommunications and Information Technology industry. From delivering world-class modular data center facilities to all-hours, 365-day operational response and disaster recovery, our multi-functional team of experts are force multipliers across the infrastructure landscape. We pride ourselves in leading from the front to advise, assist, and accompany our clients through their toughest technological and operational challenges. We always deliver results (spelled re-SILTTs)! WHY SILTT? At SILTT, objective-driven means first being people-driven. As a small business we know that the ability to achieve our mission demands we take care of our own by providing our team members with a variety of benefits that allow them to live fulfilling, healthy, balanced, meaningful lives. Thats why we believe in offering paid healthcare, ultra-competitive 401K matching, accrued paid time off and fixed holiday leave, continuous learning and professional development incentives, and promote a sustainable work-life balance. A CALL TO ACTION: As we charge ahead in the competitive world of technology and sustainment, we need a Site Security Guard to support our current and future projects.. This critical position will collaborate with fellow SILTT teammates and stakeholders. As we staff up to support a new program,his Site Security Guard will have the opportunity to be on the ground floor and help define the trajectory of our future! A DAY IN THE LIFE: In this role, you will support a high-impact Network Operations Center that forms the backbone of enterprise service delivery. This role provides the opportunity to ensure safety and security while maintaining customer trust and operational excellence. Key responsibilities include, but are not limited to: • Access Control and Visitor Management:, • Monitor and control access to all entry/exit points of the NOC facility., • Verity employee credentials, contractor badges, and visitor authorization., • Issue and recover visitor badges, ensuring compliance with security policy., • Maintain accurate access and visitor logs in both electronic and written form. 2. Patrols and Surveillance:, • Conduct scheduled and random patrols of the NOC perimeter, parking areas, loading docks, and secure zones., • Monitor CCTV and intrusion detection systems; report and document anomalies immediately., • Ensure all entry points, doors, and restricted areas remain secured., • Respond to alarm activations and coordinate with the Site Security Manager or law enforcement as needed. 3. Incident Response and Reporting:, • Act as a first responder to on-site security, fire, or safety incidents., • Follow established escalation protocols and contact the appropriate emergency responders., • Complete accurate incident, activity, and shift reports; log any irregularities., • Support Disaster Recovery (DR) and evacuation procedures when required. 4. Policy Compliance and Coordination:, • Enforce company security, safety, and confidentiality policies across all NOC staff, contractors, and visitors., • Support compliance audits and maintain readiness for unannounced inspections., • Coordinate closely with Facilities, NOC Operations, and the Site Security Manager to maintain operational continuity. 5. Customer Service and Representation:, • Serve as a professional front-line representative for all personnel and visitors entering the site., • Provide courteous assistance while maintaining enforcement authority., • Communicate effectively via radio, phone, or email across multiple shifts.BASIC QUALIFICATIONS:, • High school diploma or equivalent required; additional training in security or law enforcement preferred., • 2+ years of experience in security, law enforcement, or military preferred - data center or mission-critical site experience desirable., • Valid state security guard license or certification as required by local jurisdiction., • Familiarity with access control, CCTV, alarm, and incident management systems (Lenel, Genetec, Honeywell, etc.)., • Ability to remain alert, observant, and professional during long shifts and in emergency conditions., • Must pass background check; eligible for site-specific clearances as required., • CPR/First Aid and fire safety training preferred. SKILLS & COMPETENCIES:, • Situational Awareness and Observation Skills, • Access Control and Surveillance Proficiency, • Incident Response and Documentation, • Communication and Professional Conduct, • Dependability and Shift Discipline, • Safety and Emergency CoordinationWORK LOCATION: The work associated with this role is expected to be performed on-site at our San Diego Area location, though some travel may be required for periodic support as needed.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Training & development, • Tuition assistance SILTT is searching for a dynamic and highly motivated Site Security Lead to oversee all physical security operations, access control systems, and compliance functions for a Network Operations Center (NOC). This role ensures the continuous protection of personnel, assets, and critical infrastructure through preventative measures, risk assessments, and real-time incident management. The Site Security Lead acts as the single point of contact for all security-related matters within the NOC, coordinating closely with NOC Operations, Facilities, and Corporate Security to maintain a secure, compliant, and resilient operational environment. If you are excited by the opportunity to join our team as a Site Security Lead, we encourage you to apply today! WHO WE ARE: At SILTT were pushing the limits of infrastructure innovation in the Telecommunications and Information Technology industry. From delivering world-class modular data center facilities to all-hours, 365-day operational response and disaster recovery, our multi-functional team of experts are force multipliers across the infrastructure landscape. We pride ourselves in leading from the front to advise, assist, and accompany our clients through their toughest technological and operational challenges. We always deliver results (spelled re-SILTTs)! WHY SILTT? At SILTT, objective-driven means first being people-driven. As a small business we know that the ability to achieve our mission demands we take care of our own by providing our team members with a variety of benefits that allow them to live fulfilling, healthy, balanced, meaningful lives. Thats why we believe in offering paid healthcare, ultra-competitive 401K matching, accrued paid time off and fixed holiday leave, continuous learning and professional development incentives, and promote a sustainable work-life balance. A CALL TO ACTION: As we charge ahead in the competitive world of technology and sustainment, we need a Site Security Lead to support our current and future projects.This critical position will collaborate with fellow SILTT teammates, stakeholders and executive leadership. As we staff up to support a new program, this Site Security Lead will have the opportunity to be on the ground floor and help define the trajectory of our future! A DAY IN THE LIFE: In this role, you will support a high-impact Network Operations Center that forms the backbone of enterprise service delivery. This role provides the opportunity to ensure safety and security while maintaining customer trust and operational excellence. Key responsibilities include, but are not limited to: • Physical Security and Access Control:, • Oversee and enforce site security policies governing entry, visitor access, and badge management., • Manage access control systems (Lenel, Genetec, Honeywell, or equivalent) including provisioning, audits, and alarm response protocols., • Supervise contract or in-house security guards ensuring 24x7 coverage, professionalism, and adherence to post orders., • Conduct daily perimeter and facility checks for physical integrity, locks, barriers, cameras, and alarm systems., • Maintain access logs, badge databases, and CCTV footage retention in compliance with company and client requirements. 2. Incident Management and Emergency Response:, • Serve as the security incident commander for any onsite events (unauthorized access, fire alarms, safety incidents, or environmental threats)., • Lead coordination with NOC, Facilities, and local emergency services (fire, police, EMS) for rapid incident response., • Develop, maintain, and execute site emergency action plans and disaster recovery DR tabletop exercises., • Ensure timely escalation and after-action reporting for all security events in line with SLAs and compliance timelines. 3. Governance and Compliance:, • Implement and monitor adherence to security standards (ISO 27001, NIST, PCI-DSS, GDPR, and regional privacy laws)., • Maintain physical security documentation including SOPs, incident reports, access control matrices, and training records., • Conduct background screening verification oversight for all site personnel and contractors., • Partner with corporate compliance and HR to manage security policy violations, investigations, and corrective actions. 4. Security Technology and Systems Oversight:, • Manage CCTV, intrusion detection, and environmental monitoring systems, ensuring operational readiness and redundancy., • Coordinate maintenance, upgrades, and lifecycle management for all security systems in conjunction with IT and Facilities., • Periodically review analytics and system reports to detect anomalies or policy non-compliance. 5. Training and Audits:, • Conduct regular security awareness briefings for all NOC and contractor personnel., • Develop and maintain training modules for visitor control, incident response, and emergency drills., • Support external and internal audits; provide evidence of access control compliance and system logs. 6. Leadership and Collaboration:, • Supervise and evaluate the performance of onsite security officers or contract guards., • Interface regularly with NOC Management, Facilities, and corporate leadership regarding risk posture and security readiness., • Lead periodic Security Review Boards (SRB) and contribute to MBR/QBR performance reporting.BASIC QUALIFICATIONS:, • Associates degree or Bachelors degree in Criminal Justice, Security Management, or related field (or equivalent experience). Educational requirements may be waived or reduced for individuals with military management experience., • 5+ years of experience in corporate, data center, or mission-critical facility security management., • Demonstrated experience with electronic access control, CCTV, alarm, and environmental monitoring systems., • Strong familiarity with ISO 27001/22301, NIST 800-53, or related compliance frameworks., • Prior experience managing security staff, vendors, or contracted guard forces., • Strong incident management, reporting, and communication skills under pressure., • Preferred certifications: CPP, PSP (ASIS International), or equivalent., • Ability to obtain site-specific clearances or background checks as required. SKILLS & COMPETENCIES:, • Physical Security Operations and Compliance, • Access Control and Surveillance Management, • Incident Command and Emergency Coordination, • Risk Assessment and Mitigation, • Cross-Functional Collaboration (NOC, Facilities, IT, HR), • Communication and LeadershipWORK LOCATION: The work associated with this role is expected to be performed on-site at our San Diego Area location, though some travel may be required for periodic support as needed.

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES • Lead, direct, and coordinate team members and consultants for the entire project or phases of the project, • May manage project teams or team members, including junior staff; mentors staff, and making authoritative decisions and recommendations of significant impact related to project, • Establish, facilitate, and/or participate in both client and internal meetings; Interface with clients throughout each project and manage relationships to ensure customer satisfaction, • Participate in reviews with various governing agencies for code compliance, • Conduct design development and contract document work sessions in conjunction with other disciplines, • Coordinate workload through design development and construction document phases to complete documents on schedule, • Review architectural documents for areas of conflict with all disciplines, • Write/edit architectural specifications and work directly with owner and owners’ legal staff to establish and document the legal parameters of the construction contract, • Prepare and review all construction documents for accuracy; coordinate documents with internal team members and external consultants, • Lead field survey teams as needed for development and documentation of as-built conditions, • Demonstrate and utilize working knowledge of lighting, HVAC, structural, plumbing, fire protection, and electrical design as well as of relevant codes including IBC, ADA, CBC Title 24, and BOMA calculation concepts, • Coordinate the submission of documents to the building department and manage construction administration (RFIs, Change Orders, shop drawings, submittals, etc.), • Coordinate and assist affected disciplines with any addendum, RFIs, and change orders; incorporate agreed upon changes into project documents, • Maintain an awareness and understanding of project schedules, design fees, project budgets, reimbursable costs, etc. while adhering to pricing strategy agreed upon by client and contractors, • Exude a collaborative and positive attitude in working with the Production Team and foster an atmosphere for learning and professional growth, • Maintain, organize, and archive project files during and at the close of a project, • Perform administrative functions as needed, • Assist with other duties as necessary (i.e. site visits, as-builts, code research, etc.), • Maintain MVE & Partners standards of performance and policies at all times, • Degree in Architecture from an accredited institution or equivalent experience, • 8-15 years of experience in a professional office setting including broad experience in various project types and phases preferred, • Advanced level in operating Revit, CADD, SketchUp, Microsoft Office, • Strong listening, oral/verbal and written communication, time management and organizational skills required, • Strong skills in reading comprehension to understand the content in work-related documents, • Skills in applying industry standards and graphic conventions data to the organization and arrangement of information (i.e. plans, elevations, sections, etc.) to formulate a unified presentation, • Skill in identifying complex problems and reviewing related information to brainstorm and formulate alternatives.