Fire protection jobs in Buffalo, NYCreate job alerts

Job Description Under general supervision, the locksmith performs locksmithing duties involved in the maintenance, repair and alteration of door hardware for campus buildings and structures. Also included is the management and issuance of keys per university policy. • Cut and issue keys to authorized personnel on campus., • Install, repair, adjust, service and maintain locks, keys, entry doors, and door hardware on campus for all buildings (classrooms, offices, dorm buildings, residences). Maintain hinges, closers, exit devices and all related door hardware., • Repair locks, keys and openers for doors as required under emergency conditions., • Install, repair, adjust, service and maintain locks for file cabinets, padlocks, lockers, desks, lockboxes, anything else that is secured with a locking mechanism., • Maintain inventory for lock systems and prepare requisitions for new purchases. Basic knowledge of computer software used for access control., • Maintain a system of keys, from master keys down to individual keys for a single entry., • Ensure all keys are up to date for fire protection lockboxes and knox box at Canavan., • Provide professional input on replacement of doors, hardware, and locking mechanisms. To include getting quotes for larger installations from reputable contractors., • Inspect and approve work is performed by outside contractors, ensure the work is done properly., • Work collaboratively and professionally with all co-workers andmembers of the campus community., • Transport materials, supplies and equipment to job sites, • Considered essential personnel/responder - which means that this position may be needed at times when the University is closed or in an emergency situation as determined by the supervisor., • Re-key locks and makes keys. Solid understanding of various keying systems of various manufacturer, • Knowledge of Keymark system., • Maintain confidentiality of information (including but not limited to: proprietary information, student and employee personal information, vendor information, pricing and cost information, etc.) both during and after their employment with the University. Any question regarding the confidentiality of material, should be referred to the supervisor. Any violation shall subject the employee to disciplinary action, up to and including termination of employment., • Basic knowledge of other building trades sufficient to perform minor repairs in carpentry, plumbing and electrical., • Use of hand tools and power tools, • Utilize blueprints, diagrams and manufacturer's installation manuals to complete assigned projectsComplete all work requests, document time, materials and detail description of work., • Observe all safety regulations and wear protective gear whenever required., • As of 8/1/2025 ability to provide own hand tools for the purposes of completing assigned work, • Considered essential personnel/responder - which means that this position may be needed when the University is closed or in emergency situations as determined by the supervisor., • Ability to periodically respond to campus emergencies during off hours., • Normal work week is forty (40) hours Monday-Friday with a 30-minute unpaid lunch, but the ability to work extended hours and weekends to respond to emergencies and meet deadlines is required., • A valid New York State driver's license is required that satisfies both university and insurance company underwriting rules and regulations for driving a university motor vehicle., • Any other requested duties to assist Facility Services operations, these may be outside of typical locksmith work. Such duties include assisting with inspections, providing access for contractors, minor repairs etc., • Performs other duties as assigned by supervisor Job Posted by ApplicantPro

Job Description Position Overview: We are seeking a highly motivated Layout Technician to join our team. You will provide an essential part within our design team. This role plays a vital part in maintaining the success and quality of our fire protection installations. Responsibilities: • Layout: Design and layout fire sprinkler systems in accordance with all NFPA codes and Fire Marshal requirements. Utilizing AutoSprink or similar software to create accurate and efficient sprinkler system layouts., • Calculations: Perform all preliminary and final hydraulic calculations and size piping for fabrication and installation according to jobsite conditions., • Project Turnover: Work with the Estimator/Project Manager for the transfer of project information, including estimated materials, preliminary designs, water flow information and architectural/mechanical construction documents., • Surveying: Conduct site surveys and inspections as needed to gather necessary information for design purposes., • Field Assistance: Provide technical support and guidance to installation teams during project execution., • Data Entry and Record Keeping: Maintain accurate records of customer and project information in our CRM system., • Other Duties: Perform other layout tasks as assigned by management. Qualifications: • AutoCAD experience. (AutoSprink/HydraCAD experience preferred), • Strong organizational skills with the ability to prioritize and manage multiple tasks effectively with the ability to meet deadlines., • Excellent communication and interpersonal skills, both written and verbal., • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook)., • Familiarity with customer relationship management (CRM) software a plus., • Ability to work independently and as part of a team., • A keen eye for detail and accuracy., • Positive attitude and professional demeanor., • Understanding of fire protection terminology, a plus., • NICET Level I-III certifications, a plus., • Ability to read and interpret construction documents and specifications, a plus. Education Requirements: • HS Diploma or GED Required. Company DescriptionM&S Fire Protection LLC is a full-service fire sprinkler and fire alarm company. Operating throughout central and western New York. We are continuing to build our team with the most experienced and educated personnel. As a locally owned small business company, we’re able to provide our customers and personnel with the attention and respect they deserve. Our crew is knowledgeable, reliable, and is held at the highest regard in the industry. Fire protection is an important service and we do not take that responsibility lightly.M&S Fire Protection LLC is a full-service fire sprinkler and fire alarm company. Operating throughout central and western New York. We are continuing to build our team with the most experienced and educated personnel. \r\n\r\nAs a locally owned small business company, we’re able to provide our customers and personnel with the attention and respect they deserve. Our crew is knowledgeable, reliable, and is held at the highest regard in the industry. Fire protection is an important service and we do not take that responsibility lightly.

Job DescriptionJob Summary:We are seeking a dedicated Fire Protection Consultant to join a dynamic team in the Austin, Texas area. This role will be pivotal in project management, technical development, and business growth, contributing to the safety and efficiency of various facilities.Responsibilities: • Provide expert fire protection engineering services, including life safety code consulting, sprinkler and fire alarm design, and performance-based fire engineering for a diverse range of facility types across the United States., • Conduct comprehensive building and fire code reviews, including detailed plan analyses and site assessments to ensure compliance with regulations., • Classify hazardous materials and prepare detailed inventory statements for industrial properties, enhancing safety and compliance standards., • Assess high-piled storage arrangements and generate thorough reports to support high-piled storage permit applications., • Deliver exceptional service to clients by completing projects on time and within budget, consistently meeting or exceeding expectations., • Prepare and facilitate peer reviews of project-related technical reports to ensure quality and accuracy., • Develop innovative fire protection strategies and performance-based design approaches, offering alternative solutions to complex client design challenges., • Foster effective communication with project team members, clients, and external stakeholders to ensure seamless collaboration., • Support business development initiatives to expand service offerings and strengthen client relationships.Qualifications:, • Education: Bachelor’s degree in Fire Protection, Mechanical, Electrical, Chemical, or Civil Engineering., • We also welcome candidates with significant industry experience in fire protection, life safety, or code consulting, even if not on a traditional engineering track., • EIT Certification preferred., • Experience: 2-5 years of related experience.Skills:, • Proficiency in software such as AutoCAD, BlueBeam, Microsoft Office Suite, and Revit (preferred)., • Ability to work independently, meet deadlines, and prepare deliverables for peer review with minimal supervision., • Professional demeanor with strong interpersonal skills, fostering positive relationships with industry professionals, trades, and regulatory authorities., • Excellent communication skills, capable of articulating ideas clearly and concisely to both internal and external audiences. Benefits: • Sign-on bonus, • 401(k) plan with company match, • Competitive paid time off (PTO), • Flextime Fridays for improved work-life balance, • Comprehensive health insurance coverage with 100% of premiums paid by the company, • Biannual performance bonuses to reward outstanding contributions, • Education reimbursement

Job Description We are currently seeking applications for Alarm Technicians for service and project assignments within the 4-6 hour radius of Buffalo, NY. This role involves the installation, troubleshooting, and repair of structured cabling systems in diverse settings. The position is full-time and entails significant travel. Candidates should be eager to learn and able to assist in other cabling environments as necessary. Ideal candidates will be self-driven and dependable, capable of working independently and adept at problem-solving to ensure tasks are completed efficiently. We offer long-term employment with competitive compensation and a comprehensive benefits package that emphasizes our commitment to our team members. Responsibilities: • Install, troubleshoot, and maintain diverse cabling infrastructures., • Execute low voltage cabling in commercial buildings, including some concrete drilling and conduit work., • Ensure cable management and safety compliance in all installations., • Assist in pre-installation processes by designing and planning technical solutions., • Install cable support structures like j-hooks, cable racks, and inner duct., • Conduct system tests to verify the functionality of installed cables and devices., • Address and resolve issues with cable networks., • Ensure compliance with all relevant safety and legal standards., • Proven experience as a Data Cable Technician., • Strong proficiency in installing and troubleshooting structured cabling in retail settings., • Required state licenses for low voltage, burglar alarm, fire alarm, security, and CCTV., • Willingness for extensive travel and flexible work schedules, including on-call and night shifts, • Familiarity with blueprints and site maps., • Additional experience in CCTV, voice, and fire alarm cabling is beneficial., • Able to identify colors and learn color codes., • Comfortable working in confined spaces and with both copper and fiber installations., • Skilled in operating boom or scissor lifts and comfortable working at heights., • Possession of PPE, basic telecommunication tools, and hand tools., • Reliable personal vehicle with appropriate insurance coverage., • Strong cabling infrastructure knowledge., • Excellent communication, customer relationship, and digital literacy skills., • Experience in conduit installation is advantageous., • $25-$45 hourly rate, dependent on experience and certifications., • Fully paid medical, dental, prescription, and vision coverage., • Life insurance, AD&D, and long-term disability insurance., • Generous paid vacation time and holidays., • Additional benefits including Teladoc, TriaHealth, and services for legal and identity theft protection., • Company-matched 401(k) and IRA retirement plans., • Per-diem allowances for overnight travel., • Reimbursement for travel time and mileage when using a personal vehicle.

Job Description About Carvana If you like disrupting the norm and are looking to join a company revolutionizing an industry then you will LOVE what Carvana has done for the car buying experience. Buying a car the old fashioned way sucks and we are working hard to make it NOT suck. I mean, have you seen our vending machine?! We are looking for people who are excited to thrive in an environment of impactful change. Team spirit is evident at Carvana and everyday we let our passions and creativity foster innovation. We take big swings, set ambitious goals, and challenge each other to make data- and process-driven decisions in everything we do. Here are a few of our stories! We've been changing the game since 2013, and we're not taking our foot off the gas now. Want more of the story? Check out our background here. About the team and position We're looking for an experienced and collaborative Field Safe & Secure Manager to lead the Safe and Secure efforts for a large distribution center, consisting of 400+ associates and a product inventory exceeding $100MM. The Field Safe & Secure Manager will work closely with the Facility Leadership Team (Operations, Wholesale, Logistics, and People Operations) in supporting the safety of our associates and the protection of our assets in a dynamic working environment. The Field Safe & Secure Manager will be responsible for implementing enterprise programs and ensuring the effective adaptation by the appropriate team within one or more designated facilities. They will provide day to day leadership of the Safe and Secure Team. The ideal candidate must possess leadership and people management skills, strong communication skills, quantitative rigor, and must be able to exercise independent judgment and work collaboratively with Carvana's varied operational functions. Most importantly, you will see your insights have an immediate, tangible impact every day in a disruptive and rapidly growing company. The position is field based and reports directly to a Regional Associate Director or Senior Manager, Field Safe & Secure. What you'll be doing • Day to day leadership of the Safe and Secure Team at their facility(s). This will include recruiting, hiring, and on-boarding new associates to ensure their acclimation success. Provide clear expectations, support through consistent coaching, and provide follow up and problem solving to situations that may arise. Ensure an effective schedule is in place to properly meet facility goals. The Safe and Secure Team will consist of Safe and Secure Associates and Safe and Secure Technicians., • Build and maintain strong working relationships with the Facility Leadership Team to provide appropriate business support on all issues pertaining to Associate Safety, Site Safety, Site Physical Security, Inventory Control, Crisis Management, and Business Continuity. Integrate with daily operational processes to ensure Enterprise Safe and Secure Program elements are appropriately in place. Work proactively to identify any new risks and work with partners to implement solutions. Partner with the Field Safe & Secure Manager on continuing business needs and solutions to address., • Work daily with the Inventory Control Analyst and the Inventory Control Associate Team to monitor all vehicles assigned and in transit to the facility(s). Ensure any vehicle exception is researched and tracked. Attend weekly calls/meetings to ensure a strong working knowledge of the processes and communication of key issues. Manage the stolen vehicle reporting process and lead all inquiries pertaining to such. Partner appropriately with Market Safe and Secure Manager, Corporate Insurance, and other partners during the reporting and inquiry process., • Work daily with the Safe and Secure Team and appropriate third party vendors to ensure consistent controls are in place at our gates and other key access points. Manage the Safe and Secure technology infrastructure to ensure all tools are properly functioning and are being utilized in the most efficient way to promote a safe and secure environment for our associates., • Manage the Card Access process at our facility(s). Work closely with the Safe and Secure Technician, who will be the day to day leader of this process, to ensure timely issuance of badges to Carvana Associates and appropriate building access., • Complete Daily Production walks in conjunction with business partners. Document all issues and provide immediate solutions to remedy. Be a coach to the associate team to support the training and their roles. Work with the Facility Leadership Team to build and implement facility improvement plans to reoccurring or large scale risks. Lead the implementation of all new hire Safe and Secure training., • In partnership with the Enterprise Safe & Secure Team and the respective Carvana Business Unit – support the implementation of EHS protocols in the various facilities. Support should include training, protocol coaching, site assessments and improvement plans, recognition, and other actions to drive a culture of safety in each location., • Be an active participant in identifying and resolving issues that impact the Safe and Secure Program. This includes active participation in resolving the issue rather than simply reporting., • Track, and report on key performance indicators and exception based reporting to help mitigate risk and identify trends and root causes, including working with Risk and Operations groups to determine how to collect, store, and organize data relevant to Field Safe and Secure., • In partnership with the Market Safe & Secure Manager, provide project management support for key initiatives within the market. When directed by the Market Manager, address Safe and Secure issues and provide solutions to Carvana facilities in close proximity., • Ensure inquiries of internal and external theft and fraud are properly conducted, in close partnership with HR and applicable operating departments., • Be an active member in the local community representing Carvana specifically with local police, fire, prosecuting offices, and emergency management agencies., • Foster open and productive working relationships with other applicable company departments., • Exercise prudent discretion regarding confidential and sensitive personnel information., • Perform other duties as assigned., • Annual Theft Loss versus Accrual rate., • Annual Vehicle Damage Loss versus Goal., • Safe and Secure Facility Budget Actual vs. Plan., • Engagement Survey Results (Safe and Secure Team Engagement & Turnover)., • Third Party Security Actual versus Plan., • WC and GL Claims vs. Plan., • Ready Now Promotable Candidates. What you should know/have • Bachelor's degree from an accredited college or university preferred., • At least 5 years of Safe and Secure leadership experience, preferably including distribution, warehousing, and fulfillment., • At least 3 years' experience directly supervising and managing a team., • Excellent verbal and written communication skills., • Strong analytical and data-driven skill set., • Experience implementing Risk Mitigation programs to improve company profitability in collaboration with partners within a complex business environment., • Experience working closely and communicating effectively with a diverse set of stakeholders in an ever-changing, rapid growth environment with tight deadlines; Ability to take initiative in a constantly-changing work environment while maintaining flexibility and a collaborative attitude., • Experience investigating and resolving theft and fraud issues., • Able to help create, develop and implement process improvement(s)., • Exceptional organizational skills with attention to detail and ability to prioritize multiple tasks., • Crisis Management Leadership experience., • Experience leading OSHA Program implementation within a distribution, warehousing, and fulfillment environment., • Must promote the company culture and mission to all employees, vendors, clients, and business partners., • Knowledge of how to utilize Microsoft systems., • Full-Time Salary Position with a competitive salary., • Medical, Dental, and Vision benefits., • 401K with company match., • A multitude of perks including student loan payments, discounts on vehicles, benefits for your pets, and much more.., • A great wellness program to keep you healthy and happy both physically and mentally., • Access to opportunities to expand your skill set and share your knowledge with others across the organization., • A company culture of promotions from within, with a start-up atmosphere allowing for varied and rapid career development., • A seat in one of the fastest-growing companies in the country. Other requirements To be able to do your job at Carvana, there are some basic requirements we want to share with you. Legal stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionM/E Engineering is interviewing for a Plumbing/Fire Protection Design Engineer in our Buffalo, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering, P.C. is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop skills of Project Engineer/Designer., • Utilizes engineering principles and standard designs to develop project designs and layouts., • Works with Senior Engineer/Designer, Project Engineer/Designer, Group Manager, Associates and or Principal., • Performs assignments independently after instructions as to the general results expected., • Receives guidance on unusual problems and supervisory approval on developed plans., • In addition to duties of CAD Operator., • Assists in the preparation of contract documents., • Plans, schedules, and conducts all phases of the work in a part of or a total project of moderate scope., • Performs conventional engineering work including standard designs., • Makes engineering calculations., • Develops elementary designs expanding on detailed schematic sketches., • Coordinates production and coordination with Senior Engineer/Designer or Project Engineer/Designer., • May supervise or coordinates the work of CAD Operators., • Associate degree, bachelor's degree, or equivalent combination of experience and education., • CAD (Revit) experience preferred. Compensation Range Powered by JazzHR GzC0ZRtUIQ

Job Description We are currently hiring a Senior Plumbing and Fire Protection Engineer in our Building Engineering division at our Buffalo, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Plumbing and Fire Protection Engineer will work with clients to provide plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a leadership role for the office. Duties • Supervise plumbing and fire protection engineering staff to develop concepts, strategies, construction documents and engineering reports for new buildings and renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including plumbing, process piping systems, and fire protection design., • Responsible for code review of plumbing and fire protection systems., • Responsible for plumbing and fire protection design related to corrections, higher education, laboratory, medical, and other typical market sectors., • Ability to complete fire protection hydraulic calculations using industry software programs., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing plumbing and fire protection project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Maintain client relationships. Salary Range: $90,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Are you passionate about building engineering systems? Do you feel like you’ve hit a plateau or just have a desire to advance your career? We are seeking a Mechanical (HVAC, plumbing and/or fire protection) Designer with a strong focus and background in Building Projects to work in our Buffalo, NY office. This position will work closely with engineering staff to develop designs, drawings, specifications, and reports for buildings from conception to construction. Individual must be able to work independently, as well as part of multi-discipline teams producing electrical engineering documents that detail designs for the built environment. Labella’s architects and engineers are passionate about problem solving, affecting change to address local and regional issues, protecting natural resources, and planning for the future. Requirements Responsibilities: The ideal candidate will be self-motivated with an eagerness to learn new skills. Some of the duties the candidate may be involved in include: • Work with other engineers as part of a Project Team to develop concepts, strategies, designs, drawings, specifications, and reports., • Prepare design drawings using Revit and AutoCAD., • Laying out and sizing of ductwork, HVAC piping, plumbing piping and fire protection systems., • Performing load calculations., • Sizing of equipment., • Coordinating design with other trades., • Perform field investigations to document existing conditions., • Must maintain a positive work atmosphere by behaving and communicating in a professional manner with co-workers, staff, project managers, other disciplines, and all other employees., • Expected to improve current knowledge of technologies and trends, as they apply to the applicable project and market types, and continually strengthens skills. Qualifications: • A passion for building systems, and a desire to become a respected expert on production systems and drawing standards., • Associates Degree in Computer Aided Drafting/Design, Engineering Technology, or related field desired but not required., • A certificate or degree in AutoCAD, Revit, or related field is a plus., • Proficiency in Revit and/or AutoCAD is required., • Minimum 5 years in building system designs., • Building system design experience focused on HVAC ductwork and piping distribution, plumbing piping, and fire protection systems is a plus., • Familiarity with HVAC load calculation programs (Carrier HAP or Trane Trace) is a plus., • Strong writing, organizational and communications skills., • This career requires an attention to detail; the details matter!, • Ability to work on several projects simultaneously. Salary Range: $75,000 - $105,000 annually. The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description PARKSIDE FlRE & SECURITY JOB DESCRIPTION Job title Fire Protection Service Technician Non-Exempt Reports to / Department Service Operations Manager Hours: Mon-Fri 8:00 am – 5:00 pm, 30 mins unpaid lunch Summary of Position The Fire Protection ServiceTechnician will install, inspect, and service on various sprinkler, backflow, fire alarm, suppressions, access control, surveillance and security systems, fire extinguishers, and emergency lighting. Knowledge and Skills Current technical knowledge is required with all components related to the position summary in order to operate, trouble shoot and maintain proper functions. Experienced working with hand and power tools. This position requires computer literacy skills, experience with MS Office Suite and working experience with a Service Management Program. Duties and Responsibilities • Installation, inspection and servicing required components and equipment, • Perform preventative maintenance, • Trouble shoot and program alarm systems, access control systems, and surveillance systems, • Timely and accurately complete inspection and deficiency reports, and service logs, • Experience working with a field application service program, • High School Diploma or higher education, • NICET Level 1 or higher preferred, • Sprinkler, fire alarm. security, or supression minimum 3 years (Required), • Excellent mechanical skills, aptitude and ability to work with hand tools, • Ability to problem solve, reason and work independently at remote locations, often unsupervised, • Possess a valid Driver’s License, • Demonstrate excellent communication and interpersonal skills, • Demonstrate high degree of integrity and confidentiality Job Type: Full-time Pay: $30.00 - $75.00 per hour Expected hours: 40 per week Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Professional development assistance, • Referral program, • Retirement plan, • Tuition reimbursement, • Vision insurance

Job Description M/E Engineering is currently interviewing for a Plumbing/Fire Protection Project Engineer in our Buffalo, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate, and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimating., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR WbpFOCBQ06

Job Description * • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption and modifications of standard techniques and procedures., • Works with the Principal, Associate or Project Manager to finalize Project Scope and Schedule of deliverables and understands priorities identified., • In addition to duties of project engineer/project designer, applies advanced practices and techniques, adjusts and correlates data, recognizes discrepancies and follows projects through program, schematic, design development, construction document, bidding and construction phases., • Supervises, coordinates and reviews work, schedules and assigns work to meet completion dates., • Develops reports, studies, and system analysis., • Works in an efficient an effective manner and makes good decisions., • Evaluates application of substitute equipment., • Reviews final adjustment of equipment and systems after installation., • Writes or contacts client directly except in controversial matters., • Ability to represent the firm at meetings and cover all trades, which may require further follow through., • Is assisted on projects by other engineers and/or designers., • Estimates workforce needs and schedules and assigns work to meet completion date and updates the project manager as to status and resources available., • Mentors and trains younger engineers and designers., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science or equivalent. Powered by JazzHR HoEj2Ll3sM

Job Description Role Overview: The Mechanical Design Engineer Manager is responsible for overseeing the day-to-day operations of the mechanical design team. This position will directly interface with other leadership members of the company, and will serve as the subject matter expert to their team in the mechanical design field. Further, this role will be expected to assist and participate in the design process of Company projects, which are large metal enclosures. Job Responsibilities: • Directly oversee the Mechanical Design Engineers., • Provide managerial insight to the Mechanical Design team, serving as the subject matter expert on the field and company projects., • Manage the Mechanical Design Engineers workload and project schedules., • Participate in company leadership meetings as needed to provide updates and insight on the Mechanical Design team., • Associates degree or equivalent from a vocational training program or technical school, • At least 6 years’ experience as a Mechanical Design Engineer with specialty in structural steel applications, 3 of which are in a managerial capacity., • Familiar with ISO shipping container construction methods., • Familiar with prefabricated and modular construction methods., • Familiar with sheet metal, metal framing and weldments., • Candidate should have good oral and written communication, interpersonal, problem solving and analytical skills., • Proficiency with AutoCAD and BIM/Solid Works is required., • Experience with FEA analysis, weldment design and structural analysis, • Must have a customer service perspective with the ability to communicate effectively with all levels of staff and clients., • The successful candidate should be self-sufficient, have strong computer skills, and be very detail oriented., • Must be proficient in MS Office products including Word, Excel, Outlook.

Job DescriptionCanacre’s core services focus on leadership in Environment and Land services throughout the project lifecycle. At Canacre, we emphasize continuous development and growth. Our commitment to investing in industry knowledge and the expertise of our teams sets us apart. Our goals are to provide technical leadership for greater regulatory understanding and certainty and to build collaborative relationships with stakeholders, mitigating tomorrow’s environment, land and right-of-way risks today. At Canacre, we act with honesty and integrity within a culture where trust, collaboration, and teamwork flourish. We commit to diversity, inclusivity and the celebration of successes. Our vision is to foster an environment that promotes inspired and empowered team members who make an impact. The Environmental Monitor - Certified Professional in Erosion Sediment Control (CPESC) will monitor and report on construction-related activities with respect to the general permit requirements of the applicable regulatory agency, the client, and other cooperating/permitting agencies. The role will have a strong focus on monitoring and inspection of Erosion and Sediment Controls (ESC) and the ideal candidate will hold a CPESC designation. In addition to monitoring ESC, the CPESC will monitor and report on construction-related activities in areas of pre-determined biological, cultural, and paleontological sensitive resources. The CPESC will also be responsible for inspecting construction sites to ensure compliance with project-specific Stormwater Pollution Prevention Plans (SWPPP) under the Clean Water Act, as well as compliance with erosion control regulations and applicable environmental regulations and permits. Upon completion of construction activities, the CPESC will monitor the implementation of the appropriate restoration treatments. DUTIES AND RESPONSIBILITIES: • Conduct daily inspection of construction activities for compliance with applicable project approvals, permits (federal, state, and local), and landowner agreements, for the construction of the Project, • Developing site-specific SWPPPs and providing recommendations for the implementation of appropriate Best Management Practices (BMPs), • Oversee implementation of mitigation measures and monitor construction activities within specific areas requiring protection or environmentally sensitive areas, • Conduct regular inspections of a variety of construction sites to identify potential environmental hazards and ensure compliance with SWPPP and other relevant regulations, • Monitor and report general environmental compliance by the Construction Contractor(s) and subcontractors to client, with particular attention to fire, dust, hazardous materials, erosion control, and restoration guidelines, • Locate and facilitate protection and/or avoidance of environmentally sensitive resources such as migratory bird and raptor nests, rare plants and noxious weeds, watercourses, wetlands, high sensitivity paleontological resource, and cultural resources, • Identify sensitive resources and areas of concern prior to upcoming construction activities, and coordinating with construction personnel to discuss, • Act as a resource to construction personnel to explain environmental regulations and relevant application to construction activity, • Verify that construction work areas, access roads, and environmentally sensitive features have been properly marked and flagged before work is initiated in the area, • Ensure that erosion control or other best management practices do not inadvertently cause impact to other sensitive resources, • Act as a point of contact for onsite government agency inspectors, • Inform the Construction Contractor(s) of all potential and existing compliance issues, and coordinate with the Project team to determine appropriate corrective actions, • Coordinate with the Project team for potential stop-work when construction activities violate the conditions of the project approval(s), permits, or landowner conditions, • Identify, document, and oversee corrective actions to resolve non-compliance issues, • Document the resolution of any compliance issues in daily reports, • Maintain and submit daily reports and logs to the Project Team that document construction activities and associated compliance status for that dayOther duties as required QUALIFICIATIONS: • Post-secondary degree in Environmental Science or related field of study, • CPESC Designation or completion of the NYS Erosion and Sediment Control Certificate Program (NYSESCCP), • Minimum 5 years’ professional experience in Environmental Management, compliance, SWPPP inspection and mitigation planning, • Strong knowledge of ESC best practices in construction, • Strong working knowledge of environmental legislation and regulations, • Experience related to transmission line construction would be an asset, • Strong verbal and written communication skills – data collection and interpretation, technical report writing, regulatory permit applications, client communications, etc., • Excellent interpersonal and communications skills, • Strong analytical, problem-solving skills, prioritizing and decision-making skills, • Excellent attention to detail, • Ability to interface successfully with multiple departments, external vendors and/or customers, • Ability to manage multiple responsibilities simultaneously with minimal supervision, • Detail-oriented, self-motivated and highly organized with strong problem-solving skills, • Ability to build strong, lasting relationships with key stakeholders, • Excellent written and verbal communication skills, • Working knowledge of Microsoft Office, • Valid Driver’s License, with ability to maintain insurability under the company’s insurance carrier At Canacre, we are committed to upholding the highest standards of employment practices in each jurisdiction we operate in. We ensure that all employees are fairly compensated for their work, in accordance with the provisions outlined by the Fair Labor Standards Act (FLSA) and provincial employment standards legislation. Canacre is an equal opportunity employer, committed to a diverse workforce. Canacre complies with federal and state/provincial law governing non-discrimination in employment practices. Powered by JazzHR bBmqSwuCKR

Job Description Hohl Industrial Services is currently seeking a Project Safety Coordinator to join our team! One would be responsible for providing on-site support and oversight of the company's safety program. This role will work closely with site Leadership to ensure daily safety operations, audits, training and overall compliance is being maintained. Responsibilities: • Site Safety Support, • Conduct daily inspections to identify potential hazards and ensure compliance with safety regulations, including Corporate and specific Customer requirements., • Assist Foremen in the completion and auditing of Daily Job Safety Analysis (JSA)/Daily Work Plans., • Attend job planning meetings to help incorporate safety measures into daily work activities., • Support project leadership in ensuring proper use of equipment and personal protective equipment (PPE) to maintain a safe work environment., • Investigate incidents and near-misses, documenting findings and recommending corrective actions., • Collaborate with the Corporate Safety Director, Project Managers, and Supervisors to integrate safety measures into project planning and site execution., • Training & Orientation, • Develop and implement site safety policies and procedures in accordance with OSHA and other relevant standards., • Lead safety toolbox talks in an engaging and understandable manner; ensure full attendance and maintain accurate documentation., • Conduct on-site training as needed for job-specific topics such as forklift and aerial lift operation, fall protection, confined space entry, etc., • Coordinate owner-required orientation and training programs; verify attendance and documentation for site access compliance., • Stay updated on industry's best practices and regulatory changes to continuously improve safety protocols., • Site Audits & Compliance, • Perform regular safety inspections and field observations based on project scope and duration., • Evaluate and document compliance in the following areas:, • Safety Documentation: JSA/Daily Work Plans, SDS sheets, job site postings, HASP, emergency contacts., • Mobile Equipment: Operator qualifications, inspection records., • PPE Usage: Ensure all personnel are using the appropriate protective equipment., • Site Conditions: Assess walking/working surfaces, housekeeping, site access., • Rigging & Hoisting: Review lift plans, crane inspections, rigging qualifications, and operator/rigger/signalperson certifications., • Fall Protection: Ensure fall protection systems are in place and used properly., • Tools & Equipment: Inspect hand and power tools for safe condition and use., • Additional Items: Check for proper storage of compressed gas, scaffold safety, fire extinguisher availability, necessary permits (e.g., hot work, confined space), first aid kits, and use of caution/danger tape., • Confined Space Entry: Monitor and verify safety protocols are followed., • Maintain daily reports to the Corporate Safety Director., • Three to Five (3-5) years of construction related safety experience to include but not limited to rigging, confined space, welding and hot work, steel erection, and fall protection., • OSHA 30 required, but OSHA 510 preferred, • In-depth knowledge of OSHA regulations and construction safety standards, • CSM/CHST preferred, • Valid Drivers License required Hohl Industrial Services, Inc. established in 1950, with headquarters in Tonawanda, NY, is a full service specialized organization that provides for a diverse industrial clientele. Hohl offers a unique range of field, shop, technical, equipment sales and services. With our professional staff of engineers, project managers, skilled tradespeople, fabricators and machinists, we are able to thoroughly study and develop a customized plan to meet all of our client's needs. Combining this with our innovative strategies and techniques, added with our experienced field personnel, we administer these plans in a safe, expedient and economical measure. Job Posted by ApplicantPro

Job Description Canacre’s core services focus on leadership in Environment and Land services throughout the project lifecycle. At Canacre, we emphasize continuous development and growth. Our commitment to investing in industry knowledge and the expertise of our teams sets us apart. Our goals are to provide technical leadership for greater regulatory understanding and certainty and to build collaborative relationships with stakeholders, mitigating tomorrow’s environment, land and right-of-way risks today. At Canacre, we act with honesty and integrity within a culture where trust, collaboration, and teamwork flourish. We commit to diversity, inclusivity and the celebration of successes. Our vision is to foster an environment that promotes inspired and empowered team members who make an impact. The Environmental Compliance Inspector will monitor and report on construction-related activities with respect to the general permit requirements of the applicable regulatory agency, the client, and other cooperating/permitting agencies; as well as monitor and report on construction-related activities in areas of pre-determined biological, cultural, and paleontological sensitive resources. The Environmental Compliance Inspector will also be responsible for inspecting construction sites to ensure compliance with project-specific Stormwater Pollution Prevention Plans (SWPPP) under the Clean Water Act, as well as compliance with erosion control regulations and applicable environmental regulations and permits. The Environmental Compliance Inspector will oversee the proper implementation of mitigation measures and other environmental documents including, but not limited to, biological resources, cultural resources, paleontological resources, fire, dust, hazardous materials, and restoration requirements, as appropriate. Upon completion of Project facility construction activities, field monitors will monitor the implementation of the appropriate restoration treatments. DUTIES AND RESPONSIBILITIES: • Monitor construction activities within specific areas requiring protection or environmentally sensitive areas, • Conduct daily inspection of construction activities for compliance with applicable project approvals, permits (federal, state, and local), and landowner agreements, for the construction of the Project, • Conduct regular inspections of a variety of construction sites to identify potential environmental hazards and ensure compliance with SWPPP and other relevant regulations, • Monitor and report general environmental compliance by the Construction Contractor(s) and subcontractors to client, with particular attention to fire, dust, hazardous materials, erosion control, and restoration guidelines, • Locate and facilitate protection and/or avoidance of environmentally sensitive resources such as migratory bird and raptor nests, rare plants and noxious weeds, watercourses, wetlands, high sensitivity paleontological resource, and cultural resources, • Identify sensitive resources and areas of concern prior to upcoming construction activities, and coordinating with construction personnel to discuss, • Act as a resource to construction personnel to explain environmental regulations and relevant application to construction activity, • Verify that construction work areas, access roads, and environmentally sensitive features have been properly marked and flagged before work is initiated in the area, • Ensure that erosion control or other best management practices do not inadvertently cause impact to other sensitive resources, • Act as a point of contact for onsite government agency inspectors, • Inform the Construction Contractor(s) of all potential and existing compliance issues, and coordinate with the Environmental Compliance Manager and/or Field Lead to determine appropriate corrective actions, • Coordinate with the Environmental Compliance Manager and/or Field Lead for potential stop-work when construction activities violate the conditions of the project approval(s), permits, or landowner conditions, • Identify, document, and oversee corrective actions to resolve non-compliance issues, • Monitor and document restoration activities, • Document the resolution of any compliance issues in daily reports, • Maintain and submit daily reports and logs to the Environmental Compliance Manager and/or Field Lead that document construction activities and associated compliance status for that day QUALIFICATIONS: • Post-secondary degree in Environmental Science or related field of study, • Minimum 5 years’ professional experience in Environmental Management, compliance, SWPPP inspection and mitigation planning, • Minimum 1 year's professional experience in utilities construction industry, • Professional experience working on projects regulated under NEPA or state-equivalent, • Strong working knowledge of environmental legislation and regulations, • Training, qualification or designation related to development of SWPPPs or Spill Prevention, Control, and Countermeasure (SPCC) plans, such as CPESC and CESCL certifications or NYSESCCP required, • Experience related to transmission line construction would be an asset, • Strong verbal and written communication skills – data collection and interpretation, technical report writing, regulatory permit applications, client communications, etc., • Excellent interpersonal and communications skills, • Strong analytical, problem-solving skills, prioritizing and decision-making skills, • Excellent attention to detail, • Ability to interface successfully with multiple departments, external vendors and/or customers, • Ability to manage multiple responsibilities simultaneously with minimal supervision, • Detail-oriented, self-motivated and highly organized with strong problem-solving skills, • Ability to build strong, lasting relationships with key stakeholders, • Excellent written and verbal communication skills, • Working knowledge of Microsoft Office Powered by JazzHR oZD49VR7Nw

Job Description SUMMARY: To help maintain/enhance the value of the property throughout the repair and maintenance of Center structures, furnishings, systems and equipment at the least cost in order to contribute to the maximization of the Center's profitability. DUTIES & RESPONSIBILITY • Assist customers when and where needed, • Perform interior maintenance functions including repairs of fixture, floors, floor tile repairs, paint and prep, concrete cut and sidewall repairs, ceilings and walls. Also includes replacement of lighting devices., • Performs exterior maintenance functions including: repairs of fixtures, roofs, parking lots, and replacement of lighting devices., • Performs preventative maintenance checks on all equipment to keep it in the best possible condition., • Make minor electrical and plumbing repairs on the property., • Performs preventative maintenance checks on HVAC systems, fire protection sprinkler systems and fire extinguishers., • Ability to work from ladders and scissor lifts and boom lifts., • Informs supervisor of potential problems with any equipment used or systems responsible for., • Ability and hands on experience with corded power tools associated with building. maintenance and repairs such as circular saw, table saw, sawzall, and drills., • Act as a liaison with contractors in areas where responsible for maintenance and repair. EDUCATION REQUIREMENTS: High School Diploma or GED required EXPERIENCE: Hands on familiarity with methods and means of Various building maintenance and repairs. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts: in high, precarious places, in outside weather conditions, and is occasionally exposed to risk associated with various forms of building maintenance and repairs. The noise level in the work environment is equivalent to a busy shopping mall. Job Posted by ApplicantPro

Job DescriptionSalary: $23.00 to $26.00 per hour About Us: TM Montante Development is a full-service real estate development and property management company that develops distinct properties with a passion for enduring design, character and authenticity. Our expert team recognizes the importance of innovation and is dedicated to demonstrating that smart planning leads to better outcomes for every project partner, while also having a positive impact on the built environment. We work to define each clients purpose and mission and then collaborate on innovative strategies to turn that vision into reality. We are seeking an experienced Maintenance Technician to join our team! About the Role: The successful Maintenance Technician will be responsible for a variety of duties, including but not limited to: • Perform required maintenance and/or repairs to commercial and residential buildings (plumbing, carpentry, electrical, appliances, painting/drywall, HVAC, fire, and security systems)., • Ensure timely and efficient completion of work orders, customer requests, emergency maintenance and preventative maintenance and thorough communication of the work order process with team members and tenants, • Ability to troubleshoot problems and work with vendors when necessary, • Ability to collaborate with Property Managers, Service Dispatcher, and other team members, • Inspect buildings for adequate heating, lighting and ventilation, and are properly cleaned, • Perform safety checks on fire life safety equipment, smoke and Co2 detectors, and emergency lighting, • Perform Apartment turns which include dry wall repairs and painting, • Maintaining and enforcing building code guidelines for maintenance, mechanical and electrical areas., • Appliance troubleshooting andrepair Qualifications & Experience: • 3 years or more of experience working in a Maintenance Technician role covering multi-use buildings with commercial and residential spaces, • Knowledgeable on safe performance practices regarding the use of tools and equipment required to complete assigned tasks., • Familiarity with technology and software for work order management via computer and iPhone, • Professional communication skills and the ability to communicate with all stakeholders, • Ability to work independently, • Ability to travel to multiple work locations throughout WNY during the workday and transport necessary equipment and tools Montante Group offers a competitive total compensation package including: • Competitive base wages, reviewed annually with bonus potential, • Mileage and annual work attire allowance., • A comprehensive benefit package including medical insurance with employer contribution towards premium, medical opt out credit, employer paid life and long-term disability insurance!, • Voluntary Dental and Vision insurance, • Up to 15 days of paid time off (PTO) in year one, increasing with years of service, and paid holidays, • Financial insurance protection options which include short- and long-term disability, accidental death & dismemberment insurance, critical illness and accident insurance, legal and identity theft options, and pet insurance, • 401k Retirement Plan with employer match, • Training & Professional Development opportunities, • Community and Employee engagement events and initiatives

Job DescriptionServices Utility Technician- Regular Full Time Buffalo, NY Join the DiVal Safety Equipment team as a member of our fast-paced, well-trained, and dynamic team. The focus of this position is to test, maintain, and repair PPE, electrical gloves, gas detection equipment, and fall protection equipment while ensuring the highest quality of workmanship and professionalism. The ideal candidate has a technical aptitude, is enthusiastic, and has great communication skills. Duties and Responsibilities: • Focus on safety at all times – safety training and direction must be adhered to - report any existing or potential safety concerns to management., • Manage daily activities of the Repair Center including, inventory control, pulling and packaging of orders, preparing and sending quotes, communication with customers, sales professionals and customer care reps., • Provide evaluation, estimates, and repairs to various makes and models of gas detection devices, fall protection equipment, hot sticks, electrical gloves, level A chemical suits, SCBA’s, and hand portable fire extinguishers., • Operate electrical testing equipment in addition to visual inspection., • Contact customers and/or Sales Reps to verify account information., • Accurately complete all required reporting, order processing and customer invoicing., • Assist customers to resolve issues or complaints, referring unsolved grievances to supervisor/management to ensure timely and effective service is provided., • Complete daily workload within defined timelines set by management., • Follow the Values of DiVal: Be Safe, Be Accountable, Be Credible, Be Positive, be Smart and Be Committed., • Perform additional duties that may arise assigned by management. Skills and Requirements: • Excellent communication skills, both written and verbal a MUST., • Strong mechanical aptitude and proficiency in using hand and power tools., • Ability to read and interpret technician manuals, blueprints, and schematics., • Excellent trouble shooting skills., • Computer skills: knowledge of Microsoft Office, CRM, and AS400 (preferred)., • Strong organizational and time management skills a must., • Attention to detail a must., • High School diploma / GED equivalent with 1-3 years prior customer service experience a plus. Benefits: • Medical benefits., • Dental & vision benefits., • Other voluntary benefits (STD, LTD, Accident, Critical illness, Life insurance)., • Company provided life insurance policy., • 401K., • Paid time off. DiVal Safety Equipment is proud and dedicated to be an Equal Opportunity Employer (EOE) of Minorities / Women / Veterans / Disabled. Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location.

Be part of the future! We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we will give you the space and opportunities to grow and succeed. We are committed to making a difference. What we offer: • Competitive Starting Pay, • Paid Training, • Global Advancement Opportunities, • Company Vehicle (as applicable), • Referral Bonuses, • Comprehensive Benefits, • Medical/Dental/Vision insurance, • Health Savings Account (HSA), • Life Insurance, • 401(k) savings plan with company match, • Short-Term and Long-Term Disability, • Employee Assistance Program, • Wellness Program, • And More! What you will do: • Receive service calls from Service Resource Center, including a brief description of equipment/system malfunctions., • Contact customer representative and ascertain equipment/systems problems., • Perform service and repairs on sprinkler systems for commercial, industrial, and residential applications., • These include but are not limited to wet (steel, copper and CPVC), dry, pre-action, deluge, and fire pumps., • Follow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc., to diagnose and repair equipment., • Read and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics, and operational product manuals., • Exhibit effective customer service skills by consistently communicating with the district staff and customers to ensure complete customer satisfaction., • Electronically complete Service Acknowledgements with proper coding and obtain customer’s signature., • Participate in a scheduled On-call rotation., • Perform other duties as assigned. What we look for: Required: • 5 years of documented experience in Fire Sprinkler/Suppression industry, • Experience in reading and interpreting blueprints, submittals, and operational/product manuals, • High School Diploma or equivalent required, • Must be willing to travel., • Ability to follow verbal and written instructions Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs., • Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc., • Ability to work flexible hours including weekends to meet customer requirements, • Able to participate in an on-call rotation schedule Overnight travel will be required, • Demonstrate a high level of customer service Maintain truck inventory to ensure timely response to customer needs, • Ability to adhere to, implement, and always follow safety guidelines and procedures., • Strong organizational skills, positive attitude, and an ability to learn quickly, • Possess a valid driver’s license and driving record that meets company requirements, • Able to pass a pre-employment background, motor vehicle and drug test., • Must possess and retain current State Fire Protection License or Journeyman License valid Preferred • NICET Level II HIRING HOURLY RANGE: $15.38-27.40 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at

Job Description The following responsibilities outline the Christa Construction experience and skill set requirements for an individual holding the position of project superintendent. Key Responsibilities • Jobsite Safety, • Schedule Management, • Daily Reporting, • Jobsite Communication and Coordination, • Entrepreneurial Spirit (Leading job with Authority), • Delivering the project High Level of Quality, • Thorough technical knowledge and understanding of all structural trades (Mandatory)., • Read and comprehend all Contract Documents (Mandatory), • Understands geotechnical, structural and materials testing requirements and procedures., • Thorough knowledge and understanding of crew size required for various levels of productivity in every critical path trade., • Knowledge of soil types and their properties along with the ability to read and comprehend a soils report., • Experience managing the installation of public utilities. Fully understands the timeframe for design, approval, and easement processes., • Knowledge of Sediment and Erosion Control. SWPPP, • Thorough technical knowledge and understanding of site development trades., • Thorough technical knowledge and understanding of all building envelope trades., • Thorough technical knowledge and understanding of all mechanical, electrical, plumbing and fire protection trades., • Thorough technical knowledge and understanding of all finish trade work., • Thorough understanding of plumbing, sprinkler, HVAC, and electrical, fair housing and ADA codes., • Experience managing, coordinating, and obtaining close-in inspections and certificate of occupancy., • Can perform a full submittal review, • Ability to prepare and maintain accurate and professional as-built drawings., • Manages the commissioning of the building. (If not officially commissioned then manage the MEP engineers’ inspections, punch lists, and mechanical startups and schedule and document all owner training.), • Ability to effectively manage and chair weekly subcontractor meetings and take notes to track and update accordingly., • Ability to work closely with the Project Manager to ensure project harmony., • Makes project status presentations at owner meetings., • Completes and maintains accurate and thorough daily reports., • Completes and maintains weekly and incident safety reports., • Manages and maintains an up-to-date, posted, and accurate set of contract documents., • Maintains accurate submittal files on the project., • Performs accurate takeoffs (lumber, trim, doors, etc.), • Is proficient and experienced with FTP sites, F-drive server access, use, and similar computer abilities., • Responsible for coordinating and documenting all required project inspections with the Town, Utilities, Third Party Agencies, insurance representatives, etc., • Thorough understanding of the critical path on a project, sequence of construction, project phasing and various trade durations., • Schedules and manages the project mock-up., • Ability to create and maintain an accurate “three-week look ahead schedule"., • General knowledge of the duration and crew size required to complete various tasks., • Thorough understanding of lead time requirements for materials, selections, and work to be performed by others., • Ability to assist the Project Manager in creating an accurate buyout schedule, and the ability to provide accurate dates for the submittal log to avoid late contract awards or material submittals, • Holds Preconstruction meetings, • Soils handling, placement, and testing, • Civil utilities (storm, sanitary, water) and public utility (Gas, electric, Phone, Cat) installations., • Concrete and Masonry preparation, placement, and testing., • Structural - steel / decking / joists and LG framing installation, details, layout, and structural review, • Wood framing practices, inspections, and structural and dimensional review, • MEP rough in practices, coordination, details, and inspection., • Life safety — Fire walls / Smoke walls / Fire caulking / UL assembly, • Insulation (Thermal and Sound) and Vapor barrier, • All Interior finishes (Drywall — carpet), • Exterior -Waterproofing / weather barrier / moisture barrier / air barrier, • Roofing installation, details, and inspections, • Siding and flashing, installation, details, and inspections., • Holds an OSHA 30 Hour certificate, • Obtains and maintains a first aid/CPR certification, • Consistently sets a good example for others (wears hardhat, boots, safety glasses, etc.), • Demonstrates the ability and willingness to maintain a safe jobsite including disciplining subcontractors as necessary, • Maintains easily accessible, up to date site specific Christa Construction safety manual., • Collects site specific subcontractor safety manuals from all subcontractors prior to them starting work on site., • Equipment, • Oracle Primavera Cloud - Intermediate, • Microsoft Excel - Intermediate, • Procore - Intermediate, • Note Vault - Intermediate Whether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.Christa has completed over $7.0 billion worth of construction throughout New York State. We have experience in the construction of multi-family, senior and student housing, commercial offices, municipality work, medical facilities, warehouses, hotels and restaurants.\r\n\r\nWhether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.

Construction Superintendent - Plumbing & Fire Protection. Position: Plumbing & Fire Protection Superintendent Data Centers. Reports To: Mechanical Construction Manager / Senior Superintendent.

Perform designs of piping and equipment selection for plumbing and fire protection systems for building design; independently for smaller/less technical projects; requiring supervision of senior engineer for complex projects. Prepare production drawings of plumbing and fire protection systems from s

Since 1919, Victaulic has led the industry and continues to grow our outside sales team.At Victaulic, we don't just enjoy success.We move forward and strive to grow.Victaulic, the global leader in mechanical pipe joining innovations, has the most tenured, largest and best-trained sales team in the i

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

We are accepting applications to join our service/maintenance team at our Amherst apartment community in the position of Service (Maintenance) Technician.Our maintenance teams are responsible for the overall maintenance and physical condition of the apartments including work orders, preventive maint

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Are you ready for a career with serious growth potential?.We're excited about your interest in UPS and look forward to having people like you on our team!.The UPS Half Moon warehouse will soon be opening!.Before you start, we need to get you up-to-speed on some important details so you're ready to h

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Warehouse Worker Are you ready for a career with serious growth potential? We're excited about your interest in UPS and look forward to having people like you on our team! The UPS Half Moon warehouse will soon be opening! Before you start, we need to get you up-to-speed on some important details so

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Hit Apply below to send your application for consideration Ensure that your CV is up to date, and that you have read the job specs first.Are you ready for a career with serious growth potential?.We're excited about your interest in UPS and look forward to having people like you on our team!.The UPS

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Are you ready for a career with serious growth potential?.We're excited about your interest in UPS and look forward to having people like you on our team!.The UPS Half Moon warehouse will soon be opening!.Before you start, we need to get you up-to-speed on some important details so you're re

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Our client, a locally based wealth advisory firm, is looking to add an.Investment/Insurance Operations Manager.This position is a great career opportunity for an individual who has experience with investments, annuity, life insurance and advisory products.The position offers a highly competitive sal

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

The information below covers the role requirements, expected candidate experience, and accompanying qualifications.Are you ready for a career with serious growth potential?.We're excited about your interest in UPS and look forward to having people like you on our team!.The UPS Half Moon warehouse wi

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

HIGH VISIBILITY ROLE – GROWTH OPPORTUNITY – LEAN MINDED ORGANIZATION!.The TRG Growth Practice is partnering with one of our top pharmaceutical manufacturing clients to identify.Senior Manager of Operations, offering the chance to grow within a global, quality-driven organization.This is an excel

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Project Manager – Structural & Custom Fabrication.A leading custom steel fabricator delivering complex structural, hydraulic, and mechanical components for major infrastructure, energy, and industrial projects across North America.Known for in-house engineering and precision execution.Seeking a Pr

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

JK Executive Strategies is proud to partner with the top public university in Buffalo, NY in search of a Project Manager to join its team!.Why apply? Working here comes with benefits that exceed salary alone.There are personal rewards including comprehensive health and retirement plan options.We als

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

The SPM will lead one or more high-complexity projects of diverse scope that require an understanding of current business trends, construction techniques, innovative project delivery methods, thorough knowledge of HVAC, electrical, plumbing, fire protection, core and shell construction as well as ri

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Convergint is looking for a full-time, enthusiastic, results-driven, and forward-thinking Project Manager to join our amazing culture.In this role, you will ensure that projects are effectively executed within budgeted cost and time schedules while ensuring positive cash flow.This role is in the off

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si