Trabajos firmware engineer en Santa Clara, CaliforniaCrear alertas

Job Description We are looking for a skilled and motivated Electrical Engineer to join our team, who will design, build, and test prototype electrical systems for future consumer wearable experiences. We are looking for a candidate with a broad set of experiences, including digital design, analog/mixed signal design, power systems, wearables, or low power design. Responsibilities ● Designing schematics, completing board layouts, assembling, testing, debugging, and integrating designs into electro-mechanical systems. ● Collaborating in a team environment across engineering disciplines. ● Transforming ambiguous requests and vendor reference designs into working custom solutions. ● Incubating new technologies into research prototypes. REQUIRED Qualifications ● 4+ years of experience along with a BS/MS in Digital System Design/Electrical Engineering or Computer Engineering, or equivalent experience. ● Experience with schematic and board design using Cadence Orcad, Altium or equivalent. ● Experience with use of standard electrical engineering tools such as oscilloscopes, high speed digital test equipment, logic analyzers, spectrum analyzers and function generators ● Experience with mixed domain circuit design, filter design, operational/instrumentation amplifiers, ADC/DACs, power supply design, high speed differential circuits, uControllers, uProcessors, and programmable logic based development ● Experience with high speed signaling over DP, MIPI, HDMI, and USB SS Preferred Qualifications ● Familiarity with VR/AR systems or wearable low-power or portable electronic devices.. ● Experience writing scratch or bring-up firmware in C for embedded systems. ● Experience with IMUs/sensor physical sensor systems with an understanding of calibration methods ● Experience defining and coordinating test procedures in a lab and factory environment to facilitate system bring-up and evaluation Experience designing full system prototypes independently

Job Description About Etched Etched is building AI chips that are hard-coded for individual model architectures. Our first product (Sohu) only supports transformers, but has an order of magnitude more throughput and lower latency than a B200. With Etched ASICs, you can build products that would be impossible with GPUs, like real-time video generation models and extremely deep chain-of-thought reasoning. PCB Hardware Validation Engineer We are seeking an experienced and motivated PCB Hardware Validation Engineer to join our team. In this role, you will focus on validating the functionality of printed circuit boards (PCBs) and ensuring adequate power margins across all interfaces. You will play a critical role in collecting and analyzing data in the lab to validate hardware performance, support post-silicon characterization, and ensure robust operation across multiple subsystems, including PCIe and I2C. Representative Projects: • Perform PCB function verification to ensure all functions meet design specifications, validating critical parameters such as power and signal integrity margins, • Collect and analyze lab data to verify margins for power delivery networks, signal integrity, and overall system robustness, • Collaborate on post-silicon validation efforts, identifying key performance metrics, and conducting PVT, power, and thermal characterization to ensure alignment with design targets, • Evaluate PCI-E performance and ensure adequate margins for reliable operation, including signal integrity (SI), EOM, and bit error rate (BER), • Identify critical bugs and drive root cause analysis to resolution, collaborating with cross-functional teams as needed, • Design and execute DOE experiments to resolve hardware issues and optimize system performance, • Validate power sequencing, ensure critical microcontroller functions are operating correctly, and conduct power efficiency, noise, and transient analysis, • Perform in-depth characterization of I2C bus systems to ensure compliance with design specifications, • Maintain and track critical hardware PCB issues, document findings, and ensure effective communication with relevant stakeholders, • Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field, • Proven experience in hardware validation, lab testing, and PCB-level debugging, • Strong understanding of power and signal integrity principles, including measurement and analysis techniques, • Familiarity with PCI-E, I2C, and other relevant hardware interfaces and protocols, • Experience with lab equipment such as oscilloscopes, logic analyzers, spectrum analyzers, and power supplies, • Hands-on experience in debugging hardware issues and conducting root cause analysis, • Knowledge of power sequencing and microcontroller (uC) systems, • Strong analytical and problem-solving skills, scripting languages (e.g. Python, Matlab) How we're different: Etched believes in the Bitter Lesson. We think most of the progress in the AI field has come from using more FLOPs to train and run models, and the best way to get more FLOPs is to build model-specific hardware. Larger and larger training runs encourage companies to consolidate around fewer model architectures, which creates a market for single-model ASICs. We are a fully in-person team in Cupertino, and greatly value engineering skills. We do not have boundaries between engineering and research, and we expect all of our technical staff to contribute to both as needed. Benefits: • Full medical, dental, and vision packages, with 100% of premium covered, 90% for dependents, • Housing subsidy of $2,000/month for those living within walking distance of the office, • Daily lunch and dinner in our office, • Relocation support for those moving to Cupertino

Job Description Job Summary: We are seeking highly motivated and skilled Pod Software Engineers to join our System Software team. This team plays a critical role in developing, qualifying, and optimizing high-performance networking solutions for large-scale inference workloads. As a Pod Software Engineer, you will focus on developing and qualifying software that drives communication amongst Sohu inference nodes in multi-rack inference clusters. You will collaborate closely with kernel, platform, and telemetry teams to push the boundaries of peer-to-peer RDMA efficiency. Key Responsibilities: * High Performance Peer to Peer Networking: Design, develop, and implement RDMA based networking peering, supporting high bandwidth, low latency communication across PCIe nodes within and across racks. Includes work across Operating System, kernel drivers, embedded software and system software. * Test Development: Develop tests that qualify host processors (x86),. NICs, TORs and device network interfaces for high performance. * Burn-in integration: Furnish burn-in teams with tests that represent both real-world use cases and workloads for device to device networking, and extreme-load stress testing. * Performance/Health Telemetry Design: Define the key metrics that system software must collect to maintain high availability and performance under extreme communications workloads. Representative Projects: * Analyze performance deviations, optimize network stack configurations, and propose kernel tuning parameters for low-latency, high-bandwidth inference workloads. * Design and execute automated qualification tests for RDMA NICs and interconnects across various server configurations. * Identify and root-cause firmware, driver, and hardware issues that impact RDMA performance and reliability. * Collaborate with ODMs and silicon vendors to validate new RDMA features and enhancements. * Implement and validate peer RDMA support for GPU-to-GPU and accelerator-to-accelerator communication. * Modify kernel drivers and user-space libraries to optimize direct memory access between inference pods. * Profile and benchmark inter-node RDMA latency and bandwidth to improve inference job scaling. * Optimize NIC and switch configurations to balance throughput, congestion control, and reliability. Must-Have Skills and Experience: * Proficiency in C/C++ * Proficiency in at least one scripting language (e.g., Python, Bash, Go). * Strong experience with device-to-device networking technologies (RDMA, GPUDirect, etc.), including RoCE. * Experience with zero-copy networking, RDMA verbs and memory registration. * Familiarity with queue pairs, completions queues, and transport types. * Strong understanding of operating systems (Linux preferred) and server hardware architectures. * Ability to analyze complex technical problems and provide effective solutions. * Excellent communication and collaboration skills. * Ability to work independently and as part of a team. * Experience with version control systems (e.g., Git). * Experience with reading and interpreting hardware logs. Nice-to-Have Skills and Experience: * Experience with networking technologies like NVLink, Infiniband, ML Pod interconnects. * Experience with widely deployed Top of Rack Switches (Cisco, Juniper, Arista, etc.) * Knowledge of server virtualization. * Experience with tracing tools like perf, eBPF, ftrace, etc. * Experience with performance testing and benchmarking tools (gProf, vTune, Wireshark, etc.). * Familiarity with hardware diagnostic tools and techniques * Experience with containerization technologies (e.g., Docker, Kubernetes). * Experience with CI/CD pipelines. * Experience with Rust. Ideal Background: * Candidates who have worked on GPU or TPU pods, specifically in the networking domain. * Candidates who understand up-time challenges of very big ML deployments. * Candidates who have actively debugged complex network topologies, specifically dealing with cases of node dropouts/failures, route-arounds, and pod resiliency at large. * Candidates must understand performance implications of Pod Networking SW. Benefits * Full medical, dental, and vision packages, with generous premium coverage * Housing subsidy of $2,000/month for those living within walking distance of the office * Daily lunch and dinner in our office * Relocation support for those moving to West San Jose Compensation Range * $150,000 - $275,000 How we’re different Etched believes in the Bitter Lesson. We think most of the progress in the AI field has come from using more FLOPs to train and run models, and the best way to get more FLOPs is to build model-specific hardware. Larger and larger training runs encourage companies to consolidate around fewer model architectures, which creates a market for single-model ASICs. We are a fully in-person team in West San Jose, and greatly value engineering skills. We do not have boundaries between engineering and research, and we expect all of our technical staff to contribute to both as needed.

Job Description Senior Hardware/Electrical Engineer Cupertino, CA Position Summary We are seeking an experienced Senior Hardware Engineer (Electrical Engineer) to lead all electrical engineering activities for our access control hardware products. This role requires a seasoned professional who can design robust, compliant electrical systems that perform reliably in demanding environments. You will work closely with our Senior Mechanical Engineer to deliver integrated hardware solutions, owning all aspects of electrical design from component selection through production validation. We are committed to building products that redefine access control through innovative hardware design and intelligent software integration. Join us in creating the future of secure, seamless access experiences. Key Responsibilities • Own end-to-end electrical design for all access control hardware products, from concept through production, • Lead component selection and qualification based on performance, reliability, and cost optimization criteria, • Design and optimize PCB schematics and layouts for manufacturability, signal integrity, and thermal performance, • Drive electrical Design for Manufacturing (DFM) initiatives to ensure robust, scalable production processes, • Execute comprehensive electrical validation programs including functional, performance, and reliability testing, • Manage compliance activities including EMC testing, FCC certification, and international regulatory requirements, • Collaborate closely with Mechanical Engineering on integrated system design, thermal management, and mechanical constraints, • Conduct failure analysis and root cause investigations with statistical rigor and documented corrective actions, • Develop and execute validation plans with quantitative pass/fail criteria and statistical quality thresholds, • Mentor junior engineers and establish electrical engineering best practices and design standards Required Qualifications • 7-10 years of electrical engineering experience in electronics product development, • Proven track record designing electrical systems for products deployed in diverse environmental conditions, • Advanced proficiency in schematic capture and PCB layout tools (Altium Designer, KiCad, or equivalent), • Strong background in analog and digital circuit design, power management, and signal integrity, • Experience with component selection including reliability analysis, qualification testing, and supply chain considerations, • Knowledge of EMC/EMI design principles and experience with compliance testing and certification processes, • Proficiency in electrical validation including automated test equipment, data acquisition, and statistical analysis, • Expertise in Design for Manufacturing including assembly processes, test strategies, and yield optimization, • Experience with microcontrollers, embedded systems, and firmware integration considerations, • Knowledge of power electronics including switching regulators, battery management, and thermal considerations, • Experience with failure analysis tools including oscilloscopes, spectrum analyzers, and thermal imaging, • High-speed digital design experience with DDR, USB, Ethernet, and other communication interfaces, • Camera and imaging system integration including sensor interfaces, optics, and image processing pipelines, • Project management experience with ability to coordinate multiple concurrent design projects, • Excellent communication skills for technical documentation and cross-functional collaboration, • Strong documentation skills for design reviews, compliance submissions, and technical specifications, • Bachelor's degree in Electrical Engineering or related field Preferred Qualifications • RF antenna design experience, including impedance matching, radiation patterns, and integration challenges, • Wireless communication protocols experience (Wi-Fi, Bluetooth, cellular) and regulatory compliance, • Knowledge of cybersecurity considerations for connected devices and secure boot implementations, • Competitive Pay and Benefits to most companies in the area. Candidates may also be eligible for stock option grants., • Commitment to career growth for driving impact across the organization, • Opportunity to lead mechanical engineering for next-generation access control technology, • Collaborative environment with cutting-edge hardware and software teams, • Impact-driven role where your designs directly influence product success and user experience, • Professional development opportunities in emerging technologies and market applications

Job DescriptionSalary: Cornelis Networks delivers the worlds highest performance scale-out networking solutions for AI and HPC datacenters. Our differentiated architecture seamlessly integrates hardware,softwareand system level technologies to maximize the efficiency of GPU,CPUand accelerator-based compute clusters at any scale. Our solutions drive breakthroughs in AI & HPC workloads, empowering our customers to push the boundaries of innovation. Backed by top-tier venture capital and strategic investors, we are committed to innovation,performanceand scalability - solving the worlds most demanding computational challenges with our next-generation networking solutions. We are a fast-growing, forward-thinking team of architects, engineers, and business professionals with a proventrack recordof building successful products and companies. As a global organization, our team spans multiple U.S. states and six countries, and we continue to expand with exceptional talent in onsite, hybrid, and fully remote roles. Were seeking a Principal Performance Engineer to drive end-to-end performance for next-generation networking silicon and systems (adapters, switches, software). You will help set the performance strategy, lead investigations across layers (switch/silicon drivers AI/HPC workloads), and enable large-scale customer deployments across multiple verticals (cloud, autonomous, aerospace/defense, manufacturing, life sciences, climate).Youll partner directly with architecture, firmware, software, and lighthouse customers to raise the performance ceiling. This is a high-impact, highly visible individual-contributor role with technical leadership scoping (mentoring, cross-functional influence). Key Responsibilities: • Own pre- and post-launch performance: plan, execute, and sustain performance validation, debugging, and optimization for adapters, switches, and fabric softwarefirst in lab, then at scale in production., • Lead performance for post-silicon bring-up validation of networking ASICs and end-products (adapters, switches, etc.); driving optimization and characterization against networking metrics and application performance., • Deliver white-glove customer support at scale: reproduce field issues, co-debug in shared/onsite labs, land mitigations and durable fixes, and publish per-customer tuning guides; opportunity to grow into customer performance support lead while remaining an IC., • Pathfind and optimize forward-looking workloads: drive research and enablement for AI inference (QPS, P99/P99.9, cost/throughput), distributed AI training (NCCL/RCCL collectives), and traditional HPC (manufacturing, life sciences, climate)., • Multi-fabric research & enablement: evaluate and tune Cornelis/Omni-Path, Ethernet/RoCEv2, and InfiniBand across topologies (Clos/fat-tree/dragonfly), routing (ECMP/adaptive), and congestion control (credit, PFC/ECN/DCQCN), • Explore platform designs & tunings end-to-end: CPU/GPU NUMA placement, PCIe/GPU-Direct, BIOS/firmware, PTP/1588, switch/NIC QoS & scheduling, queue depths, microburst tolerance, ECN mark rates, retransmits, fairness., • Design credible experiments: synthesize representative traffic, replay workload traces, and run on-cluster A/B tests with statistically sound comparisons (P50/P90/P99). RequiredQualifications: • 10+ years in performance engineering, post-silicon/perf validation, or systems performance for high-speed networking or HPC/AI products., • Post-silicon expertise: hands-on bring-up and performance validation of networking ASICs/systems (adapters, switches), including crafting validation plans, establishing pass/fail, correlating pre-silicon models to silicon, and driving fixes from first silicon through production., • Demonstrated depth in networking hardware (switch/silicon) and software debug for performance tuning and issue resolution across production-scale deployments., • Hands-on multi-fabric experience: Cornelis/Omni-Path, Ethernet/RoCEv2, and/or InfiniBand; strong grasp of PCIe/GPU-Direct, queueing/QoS, and congestion control (credit, PFC, ECN, DCQCN)., • AI/HPC workload fluency: NCCL/RCCL collectives, UCX/libfabric/MPI; ability to optimize end-to-end training and inference (throughput, QPS, tail latency, efficiency) on real clusters., • Experimentation & analysis: workload modeling, on-cluster A/B tests, tail-latency analysis (P50/P90/P99); ability to separate congestion from compute/IO bottlenecks., • Automation: Python + Linux; data pipelines, dashboards, and CI hooks to prevent performance regressions., • Excellent cross-functional communication; leads without authority and drives fixes across architecture, firmware, driver, and fabric software teams., • BS/MS in CE/EE/CS (or equivalent experience). Preferred Qualifications: • Experience supporting customer-facing performance optimization or field application engineering., • Built or led aspects of a white-glove performance support program; mentored engineers and scaled best practices via playbooks and labs., • Inference-stack familiarity (e.g., NVIDIA Triton, TensorRT-LLM, vLLM) incl. batching, KV-cache, and MIG/MPS trade-offs., • Benchmarking background: MLPerf exposure; HPC app tuning (e.g., LS-Dyna, Fluent, OpenFOAM, GROMACS) and OSU/MPI microbenchmarks., • Contributions to UCX, libfabric, NCCL/RCCL, or kernel networking; comfort with eBPF/perf/tcpdump and detailed switch/NIC telemetry., • Deep understanding of networking and memory data flows, including technologies such as DPDK, RDMA, or similar high-performance I/O frameworks. Location: This role fully supports remote work for employees residing within the United States, with the flexibility to travel to our Chesterbrook Corporate Center located in Wayne, PA occasionally for in-person collaboration. We offer a competitive compensation package that includes equity, cash, and incentives, along with health and retirement benefits. Our dynamic, flexible work environment provides the opportunity to collaborate with some of the most influential names in the semiconductor industry. At Cornelis Networks your base salary is only one component of your comprehensive total rewards package. Your base pay will be determined by factors such as your skills, qualifications, experience, and location relative to the hiring range for the position. Depending on your role, you may also be eligible for performance-based incentives, including an annual bonus or sales incentives. In addition to your base pay, youll have access to a broad range of benefits, including medical, dental, and vision coverage, as well as disability and life insurance, a dependent care flexible spending account, accidental injury insurance, and pet insurance. We also offer generous paid holidays, 401(k) with company match, and Open Time Off (OTO) for regular full-time exempt employees. Other paid time off benefits include sick time, bonding leave, and pregnancy disability leave. Cornelis Networks does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services. Cornelis Networks is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.We encourage applications from all qualified candidates and will accommodate applicants needs under the respective laws throughout all stages of the recruitment and selection process. remote work

Job DescriptionSalary: $100,000 to $130,000 System Application Engineer Credo is seeking a System Application Engineer to join our Application Engineering Team. In this role, you will be responsible for verifying and validating post-silicon high-speed SerDes Ethernet products. You will develop high-efficiency Python automation scripts, test and evaluate chip performance in various system-level environments, and implement and improve SerDes algorithms and performance. This position requires close collaboration with Design, Production, and Firmware teams to ensure optimal chip performance under different operating conditions. You will analyze and debug high-speed systems using sampling oscilloscopes, BERT (Bit Error Rate Testers), and other specialized high-speed testing equipment. Key Responsibilities: • Develop automation test scripts and SerDes algorithms in Python and C., • Perform system-level verification and validation under different testing environments., • Analyze and debug high-speed systems across various data rates., • Collaborate with cross-functional teams to generate stable firmware with SerDes algorithms., • Develop SLT (System Level Test) scripts and work with the Production team to execute high-volume sample testing., • Generate comprehensive reports based on test results and analysis., • Support customers with internal chip and IP evaluations and product demonstrations. Basic Qualifications: • Masters Degree in Electrical Engineering, Computer Engineering or related major with 1+ years of experience., • Proficiency in Python programming with ability to understand and develop code under available structures., • Basic knowledge in DSP and Digital Design., • Experience with handling and running high-speed test equipment., • Team oriented with strong analytical skills, self-driven with desire to deliver beyond the scope of each job., • Excellent multitasking abilities to manage multiple concurrent projects, • Strong Multi-tasking skills to handle different requests. Preferred Skills: • Master Degree in Electrical Engineering, Computer Engineering or related major with 3+ years of experience., • Experiences with C and Firmware Development, familiar with Git., • Knowledge in Ethernet top level including Retimer, Bitmux, MAC/PCS and MAC/Sec is a plus., • Excellent problem-solving abilities and analytical thinking, and ability to handle and adapt in new generations of technologies., • Strong teamwork orientation and collaborative approach., • Skills in developing automation test scripts for link-up, training and diagnostics is a plus.

Job DescriptionTitle: Staff Electrical Test Engineer This position is based in our Campbell, California offices. This position is on-site & full-time Why Telos Health? At Telos Health, an Imperative Care company, we are developing novel robotic-assisted technologies and interventional capabilities that will forever change the disparate outcomes of ischemic stroke – a disease that impacts close to a million people a year in the U.S., and 10 million worldwide. Not only is Telos changing the way stroke is treated, but also bringing this treatment to the greater population who is currently without. We are actively building a team who is focused on developing novel solutions for this complex disease – a disease in which one in four adults will face in their lifetime. What You’ll Do The Staff Hardware Electronics Test Engineer position will be a part of the R&D team focused on the next generation of robotic products for Telos Health changing the future of healthcare. The ideal candidate will have experience working in cross-functional teams, demonstrate expertise in electrical engineering, be able to work independently to resolve difficult technical problems, and have excellent communication skills to communicate broadly across engineering teams. You will be expected to design and develop Printed Circuit Board Assembly production test hardware, contribute to design control documentation including test protocol development, risk analysis, and implement electrical safety design and documentation that complies with regulatory requirements of the FDA, UL and TUV (specifically those related to IEC, EMC, CISPR, etc). • Design electronic circuit board and robotic subassembly test fixtures that test motion control and sensor circuit performance and reliability. This encompasses mixed-signal, analog, and digital and data acquisition circuit design and collaboration with firmware, mechanical and manufacturing engineers to realize complex electromechanical test fixtures., • Troubleshoot component, PCBA, and system level electronic failures. Maintain detailed records of frequency and type of failures and prioritize test engineering efforts., • Perform DFM and DFT analyses of PCBAs, cables, and electronic subassemblies., • Work closely with cross-functional teams to define and implement a product manufacturing and test plan that ensures hardware electronics quality and reliability., • Conduct technical reliability studies and statistical evaluations to develop plans for implementing test methods and design changes to improve product quality and reliability., • Coordinate EMI/EMC testing of product hardware and identify design improvements to ensure compliance with regulatory standards such as IEC60601-1, IEC60601-1-2, CISPR22, ISO for safety and EMC compliance in a regulated environment (UL, TUV, FDA)., • Facilitate board bring-up, test, and debug of newly designed printed circuit boards., • Write electronic hardware design verification protocols and develop test vehicles for executing the protocols. What You’ll Bring:, • Minimum of a B.S. in Electrical Engineering or equivalent., • 5 years of electronic circuit design and test engineering experience., • Proficient in Altium Designer or an equivalent schematic capture and PCB layout tool., • Expertise in design of DC motor control circuits, PID control loops, and analysis of motor and motor driver performance., • Proven experience designing and developing complex electrical systems from feasibility through to production, from board to system level., • Proven experience in board level printed circuit board design, including schematic design, PCB layout in both analog/mixed signal/power electronic and digital domains., • Strong proficiency with lab test equipment including multi meters, oscilloscopes, spectrum analyzers, and power supplies., • Proficiency in code development in Python, C, C++., • Demonstrated experience with troubleshooting of sophisticated systems to include component level electronic issues, EMI/EMC/ESD mitigation, and noise identificantion and suppression., • Demonstrated experience of design, test and solving for medical safety and IEC EMC standards, such as IEC60601-1, IEC60601-1-2, IEC61000-4-6 or equivalent, for complex medical systems. Join Us! Apply today. Salary Range: $171,000 – 190,000 annually Please note that the salary information is a general guideline only. Imperative Care considers factors such as scope and responsibilities of the position, candidate's work experience, education/training, key skills, and internal equity, as well as location, market and business considerations when extending an offer. As part of our total rewards package, Imperative Care offers comprehensive benefits including a 401k plan, health benefits, generous PTO, a parental leave program and emotional health resources. Powered by JazzHR oggak3dPTG

Job Description Who we are: Persimmons is building the infrastructure that will power the next decade of AI. Founded in 2023 by veteran technologists from the worlds of semiconductors, AI systems, and software innovation, We’re on a mission to enable smarter devices, more sustainable data centers, and entirely new applications the world hasn’t imagined yet. Why join us: We’re growing fast and looking for bold thinkers, builders, and curious problem-solvers who want to push the limits of AI hardware and software. If you're ready to join a world-class team and play a critical role in making a global impact - we want to talk to you. What you’ll do: As a Senior ASIC Design Verification Engineer, you will be responsible for verifying critical blocks in the Persimmons inference chiplet that will run the smallest to largest AI models. Your primary duties and responsibilities include: • Lead comprehensive verification planning and execution for fabric-level and full-chip designs, ensuring robust validation across all design hierarchies., • Collaborate cross-functionally with architecture, firmware, and design teams to develop detailed test plans that validate implementation against specifications and requirements., • Design and implement advanced testbenches featuring constrained random stimulus generation, intelligent checkers, comprehensive scoreboards, and targeted assertions to ensure design correctness and coverage., • Architect and execute verification strategies encompassing test planning, coverage analysis, automated regression management, and data-driven insights to maximize verification efficiency and quality., • Drive verification excellence through established methodologies including structured code reviews, agile sprint planning, and systematic feature deployment processes. What You Bring To The Table: • Educational Foundation: Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or related technical discipline., • Proven Experience: 5-10 years of hands-on verification experience spanning test plan development, simulation environment creation, test implementation, and complex debugging across diverse IP blocks, SoCs, and system-level designs., • Specialized Expertise: Demonstrated proficiency in fabric-level and chip-level verification methodologies and best practices., • Technical Mastery: Advanced skills in SystemVerilog/Verilog, UVM methodology, and C/C++ programming, including embedded code development and validation for RISC-based processors., • Competitive salary and benefits package, • Flexible PTO, • 401k

Job DescriptionSalary: $90,000 to $130,000 Role Credo is seeking a System Software Engineer to join the Applications team to help develop our SDK. The position will require developing software to control our diverse chip and IP products and the firmware running on them. You will work with internal engineers to use the SDK for internal chip testing/validation purposes. You will also interface with our customers to integrate and use the SDK in their own software stack. Additional responsibilities will be flexibly determined based off your secondary skills. Responsibilities Familiarize with SerDes and IEEE ethernet Layer 1 functionality Develop C/python code for the SDK based on designer / engineer recipe code Coordinate with firmware team to define high-level interfaces for features Document functionality for both internal and customer users to use Interface with customers to integrate and debug issues with SDK in their software stack Write test code to validate SDK and firmware features Basic Qualifications BS degree in Computer Engineering / Computer Science None to 5 years of experience Strong proficiency in C and Python (C++ optional) Teamwork and collaboration with other developers on the SDK team Cross-team communication for defining of requirements Basic understanding of the Posix standards for Operating Systems Familiarity in VCS such as git Testing framework such as pytest CI/CD Data science libraries (numpy, pandas, scipy) Preferred Skills Masters degree in computer science or equivalent Networking and OSI Layer 1 / Layer 2 knowledge Mathematical background in Signal processing (Frequency Domain analysis, linear systems) Documentation tools such as doxygen, sphinx, or mkdocs

Job DescriptionCompany Description Sandisk understands how people and businesses consume data and we relentlessly innovate to deliver solutions that enable today’s needs and tomorrow’s next big ideas. With a rich history of groundbreaking innovations in Flash and advanced memory technologies, our solutions have become the beating heart of the digital world we’re living in and that we have the power to shape. Sandisk meets people and businesses at the intersection of their aspirations and the moment, enabling them to keep moving and pushing possibility forward. We do this through the balance of our powerhouse manufacturing capabilities and our industry-leading portfolio of products that are recognized globally for innovation, performance and quality. Sandisk has two facilities recognized by the World Economic Forum as part of the Global Lighthouse Network for advanced 4IR innovations. These facilities were also recognized as Sustainability Lighthouses for breakthroughs in efficient operations. With our global reach, we ensure the global supply chain has access to the Flash memory it needs to keep our world moving forward. Job Description Sandisk is seeking a Product Development Engineer to join the Memory Technology team in Milpitas, CA. The ideal hire for this role will collaborate with all internal functions (design, device, firmware, test, system, marketing, packaging, quality, reliability, and manufacturing) needed to develop and bring a Mobile/SSD product to market. The focus of the individual in this multi-disciplinary team is to design, develop, and maintain a product test flow that balances cost, quality, and time to market while meeting various internal and external requirements. This engineer also takes a leading role in resolving HW (PKG/NAND/ASIC) related failures during the development process. Post-qualification, the individual will work with the manufacturing team to proactively improve the yield, test cost and quality. ESSENTIAL DUTIES AND RESPONSIBILITIES: The ideal candidate will have a solid background in Electrical Engineering and is internally motivated to understand and solve technical issues. They must display strong ownership of projects and results including: • Creating the test strategy for new embedded Flash products based on customer requirements, engineering specifications, and device characteristics., • Demonstrate strong analytical skills, structured problem solving, attention to details and ability to change direction quickly., • The ability to work effectively in a team but display leadership when needed and display strong ownership of projects and results., • Modify/Write Python scripts to perform data analysis with statistic libraries.Qualifications Required: • Current student, pursuing a BS, MS or Ph.D.in Electrical Engineering, Computer Engineering, or related engineering field with a graduation date before July 2026. The expected start date for this position is in July 2026., • Minimum of 3.0 GPA, • Strong technical skills in area of study, • Interest in flash memory, semiconductor, components, nonvolatile memory industry, • Proficient in Microsoft Office applications, • Windows and Linux server storage environments, • Specialization in analog design, digital design, device physics related field is preferred., • Python/C development skills, • Exceptional written and verbal communication skills Additional Information Sandisk is committed to providing equal opportunities to all applicants and employees and will not discriminate against any applicant or employee based on their race, color, ancestry, religion (including religious dress and grooming standards), sex (including pregnancy, childbirth or related medical conditions, breastfeeding or related medical conditions), gender (including a person’s gender identity, gender expression, and gender-related appearance and behavior, whether or not stereotypically associated with the person’s assigned sex at birth), age, national origin, sexual orientation, medical condition, marital status (including domestic partnership status), physical disability, mental disability, medical condition, genetic information, protected medical and family care leave, Civil Air Patrol status, military and veteran status, or other legally protected characteristics. We also prohibit harassment of any individual on any of the characteristics listed above. Our non-discrimination policy applies to all aspects of employment. We comply with the laws and regulations set forth in the "Know Your Rights: Workplace Discrimination is Illegal” poster. Our pay transparency policy is available here. Sandisk thrives on the power and potential of diversity. As a global company, we believe the most effective way to embrace the diversity of our customers and communities is to mirror it from within. We believe the fusion of various perspectives results in the best outcomes for our employees, our company, our customers, and the world around us. We are committed to an inclusive environment where every individual can thrive through a sense of belonging, respect and contribution. Sandisk is committed to offering opportunities to applicants with disabilities and ensuring all candidates can successfully navigate our careers website and our hiring process. Please contact us at to advise us of your accommodation request. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. Based on our experience, we anticipate that the application deadline will be 11/28/2025 (3 months from posting), although we reserve the right to close the application process sooner if we hire an applicant for this position before the application deadline. If we are not able to hire someone from this role before the application deadline, we will update this posting with a new anticipated application deadline. #LI-TG1 Compensation & Benefits Details • An employee’s pay position within the salary range may be based on several factors including but not limited to (1) relevant education; qualifications; certifications; and experience; (2) skills, ability, knowledge of the job; (3) performance, contribution and results; (4) geographic location; (5) shift; (6) internal and external equity; and (7) business and organizational needs., • The salary range is what we believe to be the range of possible compensation for this role at the time of this posting. We may ultimately pay more or less than the posted range and this range is only applicable for jobs to be performed in California, Colorado, New York or remote jobs that can be performed in California, Colorado and New York. This range may be modified in the future., • You will be eligible to participate in Sandisk's Short-Term Incentive (STI) Plan, which provides incentive awards based on Company and individual performance. Depending on your role and your performance, you may be eligible to participate in our annual Long-Term Incentive (LTI) program, which consists of restricted stock units (RSUs) or cash equivalents, pursuant to the terms of the LTI plan. Please note that not all roles are eligible to participate in the LTI program, and not all roles are eligible for equity under the LTI plan. RSU awards are also available to eligible new hires, subject to Sandisk's Standard Terms and Conditions for Restricted Stock Unit Awards., • We offer a comprehensive package of benefits including paid vacation time; paid sick leave; medical/dental/vision insurance; life, accident and disability insurance; tax-advantaged flexible spending and health savings accounts; employee assistance program; other voluntary benefit programs such as supplemental life and AD&D, legal plan, pet insurance, critical illness, accident and hospital indemnity; tuition reimbursement; transit; the Applause Program, employee stock purchase plan, and the Sandisk's Savings 401(k) Plan., • Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company’s sole discretion, consistent with the law.

Job Description Location: Hybrid – Santa Clara, CA or Austin, TX Type: Full-Time | Salary: $150K–$250K + Competitive Equity Visa Sponsorship: H-1B, O-1, OPT Available 🚀 About the Opportunity Initio Capital is hiring a Design Verification Engineer on behalf of one of the most ambitious chip startups in the U.S.—a stealth-mode team redefining the future of AI and analytics acceleration. Backed by top-tier investors and built around a seasoned team from Apple, Intel, and Nvidia, this company is designing RISC-V–based silicon with tightly integrated AI acceleration and custom workloads in mind. This is an opportunity to work on deeply complex verification challenges that impact compute performance, efficiency, and reliability at the foundational layer of modern infrastructure. 🧠 About the Role As a Silicon Verification Engineer, you'll take ownership of top-level verification for the company’s AI/analytics accelerator. You'll define and implement verification strategies, write test plans, build emulation-friendly testbenches, and partner with software and silicon teams to enable end-to-end validation. This role offers the chance to shape product and verification flow in a high-autonomy environment. 🔧 What You’ll Do * Develop verification strategy and own DV execution for complex accelerator subsystems * Write and maintain testbenches in SystemVerilog, C++, and Python * Create coverage-driven and directed/random tests for full-chip and subsystem validation * Collaborate with software, firmware, and architecture teams for co-simulation * Build infrastructure for emulation, simulation, and hardware bring-up * Deliver high-quality silicon verification aligned with aggressive execution timelines ✅ What We’re Looking For * 5+ years of hands-on design verification (DV) experience * MS or PhD in Electrical Engineering, Computer Engineering, or related field * Strong SystemVerilog, C++, and/or Python development skills * Deep understanding of computer architecture, SoC design, and memory/cache subsystems * Proven experience verifying CPUs, GPUs, or custom accelerators * Familiarity with industry-standard DV methodologies (UVM, formal, coverage-driven, etc.) 🟢 Bonus Points * Experience enabling HW/SW co-simulation or working on firmware test coverage * Past contributions to hardware/software co-design workflows * Previous experience at early-stage silicon or systems startups * Passion for AI/ML workloads, compute acceleration, or chip performance optimization 💸 Compensation & Perks * Salary: $150K – $250K * Equity: Meaningful early-stage grant * Hybrid in Santa Clara, CA or Austin, TX * H-1B, O-1, OPT sponsorship available * Collaborate with industry leaders from the most respected names in semiconductors * Work on a moonshot AI-silicon vision with deep technical impact and upside This is the rare chance to define the performance boundaries of next-generation AI chips from the ground up. Apply now to be considered for this high-impact role.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Relocation bonus, • Vision insurance As an AI Engineer, you will be responsible for designing, developing, and deploying AI and machine learning models to enhance the capabilities of our consumer electronics and IoT products. You will collaborate with cross-functional teams, including software engineers, hardware engineers, and product managers, to bring intelligent features to life. Key Responsibilities: • Design, develop, and optimize AI/ML models for edge computing and cloud-based applications., • Work with large-scale datasets to train, test, and validate AI models., • Collaborate with software and firmware engineers to integrate AI models into embedded systems and mobile applications., • Optimize AI algorithms for efficiency, power consumption, and real-time performance in resource-constrained environments., • Stay updated with the latest AI/ML advancements and research to apply innovative solutions to our products., • Develop and maintain documentation, including model architecture, training procedures, and performance benchmarks., • Support the deployment and monitoring of AI models in production environments.Qualifications & Skills:, • Bachelors or Masters degree in Computer Science, Artificial Intelligence, Machine Learning, Electrical Engineering, or a related field., • 2+ years of experience in AI/ML development, preferably in the consumer electronics or IoT industry., • Proficiency in programming languages such as Python and C++., • Experience with AI/ML frameworks such as PyTorch, or scikit-learn., • Strong background in computer vision, deep learning, LLM, or reinforcement learning., • Experience with embedded AI and edge computing frameworks (e.g., ONNX, NVIDIA Jetson)., • Knowledge of data processing pipelines, model training, and hyperparameter tuning., • Familiarity with cloud AI services (AWS, Google Cloud, Azure AI) and MLOps practices., • Strong problem-solving skills and ability to work in a fast-paced, collaborative environment., • Excellent verbal and written communication skills.Preferred Qualifications:, • Experience developing AI applications for smart home devices, wearables, or industrial IoT., • Understanding of sensor fusion, signal processing, and real-time analytics., • Knowledge of AI ethics, privacy, and security considerations in IoT applications., • Experience with deployment tools such as Docker, Kubernetes, and CI/CD pipelines.Why Join Us?, • Work on cutting-edge AI technologies for next-generation consumer electronics and IoT products., • Collaborate with a passionate and talented team in a fast-growing company., • Competitive salary, stock options, and benefits package., • Opportunities for professional development and career growth.If you are an AI enthusiast who thrives on innovation and wants to shape the future of smart devices, wed love to hear from you! Apply now and be part of our exciting journey.

Job DescriptionPlatform Validation Engineer Lead About Etched Etched is building AI chips that are hard-coded for individual model architectures. Our first product (Sohu) only supports transformers, but has an order of magnitude more throughput and lower latency than a B200. With Etched ASICs, you can build products that would be impossible with GPUs, like real-time video generation models and extremely deep & parallel chain-of-thought reasoning agents. Job Summary Etched is seeking a skilled and motivated Hardware Validation Engineer Lead to join our team. This role focuses on verifying the functionality of printed circuit boards (PCBs) and ensuring adequate margins for power and all interfaces. The engineer will play a critical lead role in collecting and analyzing data in the lab to validate hardware performance, support post-silicon characterization, and ensure robust operation across various subsystems, including PCI-E and I2C. Representative Projects * PCB Function Verification: Ensure all PCB functions meet design specifications and validate critical parameters such as power and signal integrity margins. * Lab Data Collection: Gather and analyze data in the lab to verify margins for power delivery networks, signal integrity, and overall system robustness. * Post-Silicon Characterization: Collaborate on post-silicon validation efforts, identifying key performance metrics, PVT Power and thermal characterization and ensuring alignment with design targets. * PCI-E Margin Analysis: Evaluate PCI-E performance and ensure adequate margins for reliable operation, SI / EOM and BER. * Debugging & Root Cause Analysis: Identify critical bugs and drive root cause analysis to resolution, collaborating with cross-functional teams as needed. * DOE Experiments: Design and execute experiments (DOE) to resolve hardware issues and optimize system performance. * Power Validation: Validate power sequencing and ensure critical microcontroller functions are operating correctly. Power Efficiency, Noise & Transient Analysis: * I2C Bus Characterization: Perform in-depth characterization of I2C bus systems to ensure compliance with design specifications. * Issue Tracking: Maintain and track critical hardware PCB issues, documenting findings and ensuring effective communication with relevant stakeholders. * Collaboration: Work closely with design, firmware, and system engineering teams to ensure end-to-end hardware quality. Create a comprehensive validation plan for boards and systems. You maybe a good fit if you have * Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field. * Proven experience in hardware validation, lab testing, and PCB-level debugging. * Strong understanding of power and signal integrity principles, including measurement and analysis techniques. * Familiarity with PCI-E, I2C, and other relevant hardware interfaces and protocols. * Experience with lab equipment such as oscilloscopes, logic analyzers, spectrum analyzers, and power supplies. * Hands-on experience in debugging hardware issues and conducting root cause analysis. * Knowledge of power sequencing and microcontroller (uC) systems. * Strong analytical and problem-solving skills, scripting languages (e.g. Python, Matlab) * Excellent communication and teamwork abilities. Base Salary Compensation * $200,000 - $250,000 Benefits * Full medical, dental, and vision packages, with generous premium coverage * Housing subsidy of $2,000/month for those living within walking distance of the office * Daily lunch and dinner in our office * Relocation support for those moving to West San Jose How we’re different Etched believes in the Bitter Lesson. We think most of the progress in the AI field has come from using more FLOPs to train and run models, and the best way to get more FLOPs is to build model-specific hardware. Larger and larger training runs encourage companies to consolidate around fewer model architectures, which creates a market for single-model ASICs. We are a fully in-person team in West San Jose, and greatly value engineering skills. We do not have boundaries between engineering and research, and we expect all of our technical staff to contribute to both as needed.

Job Description Job Summary We are seeking a highly skilled and motivated System Software Engineer to join our team, responsible for the foundational software that powers our server infrastructure. This role focuses on the development, integration, and debugging of critical system software components, including BIOS, BMC firmware, boot processes (including NetBoot), root of trust implementations, advanced system logging, and kernel-mode drivers. You will play a pivotal role in ensuring the reliability, security, and performance of our server platforms, and contribute to the integration of data center orchestration technologies at the node level. Key Responsibilities: * Firmware and Boot Process Development: Design, develop, and maintain BIOS and BMC firmware, ensuring robust and efficient server boot processes, including NetBoot implementations. * Measure and Tune System Performance Configuration: Analyze DRAM timings, PCIe configurations, power state transitions etc. to ensure high performance and maximal reliability. * Root of Trust and Security: Implement and maintain security features, including root of trust mechanisms, to protect system integrity and data security. * Kernel-Mode Driver Development and Debugging: Develop and debug kernel-mode drivers, ensuring seamless hardware integration and optimal system performance. * Advanced System Logging and Diagnostics: Design and implement advanced system logging and diagnostic capabilities to facilitate efficient troubleshooting and performance analysis. * Data Center Orchestration Integration: Integrate and optimize node-level data center orchestration technologies, such as Kubernetes and Docker, into the system software stack. * System Validation and Testing: Develop and execute comprehensive test plans to validate system software functionality, stability, and performance. * Collaboration and Troubleshooting: Collaborate with hardware and software teams to diagnose and resolve complex system-level issues. Representative Projects: * Implement and validate secure boot processes, including root of trust verification. * Develop and debug kernel-mode drivers for new hardware peripherals. * Design and implement advanced system logging and monitoring solutions. * Optimize BIOS and BMC firmware for improved boot times and system stability. * Integrate node-level container orchestration capabilities into the system software. * Analyze and resolve complex system-level issues related to boot failures, hardware errors, and performance degradation. * Analyze and optimize system level logging for large scale server deployments. * Implement and debug NetBoot processes for large server deployments. Must-Have Skills and Experience: * Proficiency in C/C++. * Strong understanding of BIOS and BMC firmware architectures. * Experience with server boot processes (EFI, UEFI), and NetBoot technologies. * Knowledge of root-of-trust and security principles. * Experience with kernel-mode driver development and debugging. * Strong understanding of operating systems (Linux preferred) and server hardware architectures. * Experience with advanced system logging and diagnostic tools. * Ability to analyze complex technical problems and provide effective solutions. * Excellent communication and collaboration skills. * Experience with version control systems (e.g., Git). * Experience with reading and interpreting hardware logs. Nice-to-Have Skills and Experience: * Experience with data center orchestration technologies (Kubernetes, Docker). * Experience with hardware diagnostic tools and techniques. * Knowledge of server virtualization. * Experience with tracing tools like perf, eBPF, ftrace, etc. * Experience with performance testing and benchmarking tools (gProf, vTune, Wireshark, etc.). * Experience with CI/CD pipelines. * Experience with Rust. Benefits * Full medical, dental, and vision packages, with generous premium coverage * Housing subsidy of $2,000/month for those living within walking distance of the office * Daily lunch and dinner in our office * Relocation support for those moving to West San Jose How we’re different Etched believes in the Bitter Lesson. We think most of the progress in the AI field has come from using more FLOPs to train and run models, and the best way to get more FLOPs is to build model-specific hardware. Larger and larger training runs encourage companies to consolidate around fewer model architectures, which creates a market for single-model ASICs. Compensation Range: $200K - $275K

Job DescriptionSalary: Cornelis Networks delivers the worlds highest performance scale-out networking solutions for AI and HPC datacenters. Our differentiated architecture seamlessly integrates hardware, software and system level technologies to maximize the efficiency of GPU, CPU and accelerator-based compute clusters at any scale. Our solutions drive breakthroughs in AI & HPC workloads, empowering our customers to push the boundaries of innovation. Backed by top-tier venture capital and strategic investors, we are committed to innovation, performance and scalability - solving the worlds most demanding computational challenges with our next-generation networking solutions. We are a fast-growing, forward-thinking team of architects, engineers, and business professionals with a proven track record of building successful products and companies. As a global organization, our team spans multiple U.S. states and six countries, and we continue to expand with exceptional talent in onsite, hybrid, and fully remote roles. Cornelis Networks is hiringa Senior ASIC Design Engineer to lead the design and integration of PCIe controllers into our next-generation SoCs. The ideal candidate will have deep expertise in PCI Express protocol (Gen4/Gen5/Gen6), integration into high performance ASICs, emulation and post silicon bring-up. Key Responsibilities: • Own end-to-end integration of PCIe IP into complex ASIC designs., • Collaborate with IP vendors, architecture, verification, physical design, and software teams to deliver robust PCIe subsystems., • Drive performance optimization efforts across the PCIe stack, from PHY tuning to DMA/transaction layer efficiency., • Contribute to system architecture and microarchitecture discussions with a focus on IO and interconnect scalability., • Lead silicon bring-up and validation of PCIe links in the lab; work closely with board and firmware teams., • Debug functional and performance issues at RTL, gate-level, and silicon., • Ensure compliance with PCIe specifications and participate in interoperability testing where needed., • Provide mentorship to junior engineers and help define PCIe subsystem development best practices., • Good understanding of high-bandwidth, low-latency connectivity for high-performance compute platforms Minimum Qualifications: • BS/MS in Electrical Engineering, Computer Engineering, or related field., • 10+ years of industry experience in ASIC/SoC design with a focus on PCIe controller integration., • Proven experience in silicon bring-up and debug of high-speed interfaces., • Solid understanding of PCIe protocol stack (PHY, MAC, TLP, DLL), configuration space, and link training., • Hands-on experience with PCIe verification environments, performance tuning, and power-aware design., • Familiarity with PCIe compliance testing, simulation tools (e.g., VCS, Questa), and lab equipment (e.g., protocol analyzers, oscilloscopes)., • Strong scripting (Python, Perl, TCL) and debugging skills., • Strong verbal and written communication skills. Preferred Qualifications: • Experience with PCIe Gen5/Gen6 and advanced retimer or switch solutions., • Exposure to CXL, CCIX, or other cache-coherent interconnects., • Background in data center or AI/ML accelerator architectures., • Experience with emulation and prototyping platforms (e.g., ZeBu, Palladium, HAPS) for PCIe subsystem validation. Location: This is a remote position for employees residing within the United States. We offer a competitive compensation package that includes equity, cash, and incentives, along with health and retirement benefits. Our dynamic, flexible work environment provides the opportunity to collaborate with some of the most influential names in the semiconductor industry. At Cornelis Networks your base salary is only one component of your comprehensive total rewards package. Your base pay will be determined by factors such as your skills, qualifications, experience, and location relative to the hiring range for the position. Depending on your role, you may also be eligible for performance-based incentives, including an annual bonus or sales incentives. In addition to your base pay, youll have access to a broad range of benefits, including medical, dental, and vision coverage, as well as disability and life insurance, a dependent care flexible spending account, accidental injury insurance, and pet insurance. We also offer generous paid holidays, 401(k) with company match, and Open Time Off (OTO) for regular full-time exempt employees. Other paid time off benefits include sick time, bonding leave, and pregnancy disability leave. Cornelis Networks does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services. Cornelis Networks is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. We encourage applications from all qualified candidates and will accommodate applicants needs under the respective laws throughout all stages of the recruitment and selection process. remote work

Job DescriptionBenefits: • Small Team, • Opportunity for advancement About the Role As a Senior or Managerlevel Optical Design Engineer (depending on experience), youll lead the development of advanced optical systemstaking ideas from simulation through validation and integration into Optopaxs endtoend imaging platforms. Youll drive innovation and help strengthen our capabilities in photonics, AI cameras, and embedded vision. We are open to remote candidates within the US with a preference for Bay Area candidates to work on-site alongside the Executive Management team in San Jose, CA. What Youll Do • Lead design, simulation, tolerancing, and optimization of complex optical systems using tools such as Ansys Optics Studio (Zemax), Code V, LightTools, Lumerical, Quadoa, or equivalent., • Perform straylight, raytrace, wavefront, photon budget, and design for manufacturability (DFM) analyses (e.g., MonteCarlo tolerancing)., • Translate customer specifications into detailed design requirements; collaborate across mechanical, electrical, firmware/software, and manufacturing teams for system integration and prototyping., • Guide validation of designs via lab testing, metrology, and performance measurement (e.g., MTF, distortion, SNR, wavefront)., • Mentor and support junior optical engineers and crossfunctional partners, establishing design best practices and documentation., • Drive innovation through research into new optical technologies, materials, coatings, and manufacturing techniques, informing future product strategies., • Drive critical technical communications / negotiations with customers to ensure optical solutions align with performance, cost, and manufacturability goals.What Youll Bring Required • Masters or PhD in Optical Engineering, Physics, or a related field., • Minimum 5+ years experience in optical design and engineeringideally handling advanced, multielement systems., • High proficiency with optical design and simulation tools (e.g., Zemax, Code V and others)., • Strong fundamentals in geometrical and physical optics design methodology, optical fabrication techniques, DFM, tolerancing, and metrology., • Experience in design documentation and cross-functional collaboration.Preferred, • Background in imaging systems for robotics, embedded cameras, LWIR, biomedical, AR/VR, sensors, or AI vision modules (reflecting Optopaxs core markets)., • Exposure to prototyping processes including waferlevel optics, active alignment, cleanroom assembly, or rapid prototyping workflows., • Familiarity with optical test stations or imaging qualification methods (a pillar of Optopaxs product offerings)., • Experience in team leadership or mentoring, and process improvement with a proven track record of success, • Programming or scripting skill (MATLAB, Python) for automation of analyses or data processing. This is a remote position.

Job DescriptionTest Automation and Factory Testing Engineer About Etched Etched is building AI chips that are hard-coded for individual model architectures. Our first product (Sohu) only supports transformers, but has an order of magnitude more throughput and lower latency than a B200. With Etched ASICs, you can build products that would be impossible with GPUs, like real-time video generation models and extremely deep & parallel chain-of-thought reasoning agents. Job Summary We are seeking a Test Automation and Factory Testing Engineer to own the testing, validation, and quality assurance processes for our hardware production lines. This role will bridge engineering and manufacturing, ensuring that all devices meet stringent performance, reliability, and compliance standards before deployment. You will collaborate closely with hardware design, system testing, operations, and manufacturing partners to design and maintain robust test infrastructure. Key responsibilities * Develop, implement, and maintain automated and manual test procedures for production hardware. * Define test coverage requirements and ensure validation against functional specifications. * Collaborate with hardware, firmware, and manufacturing teams to design scalable test fixtures and infrastructure. * Perform root cause analysis and debug issues found in factory and field environments. * Ensure compliance with industry standards for safety, reliability, and performance. * Monitor and analyze test data to drive process improvements and yield optimization. * Work with manufacturing partners to integrate and maintain testing workflows at scale. * Create documentation and provide training to factory teams to ensure proper execution of test procedures. You may be a good fit if you have * Bachelor’s degree in Electrical Engineering, Computer Engineering, or related field. * 10+ years of experience in hardware validation, manufacturing test engineering, or a similar role. * Hands-on experience with test equipment * Proficiency in scripting and automation (e.g., Python, LabVIEW, or equivalent). * Strong understanding of hardware bring-up, debug, and validation processes. * Ability to analyze data and drive decisions for yield, quality, and process improvements. * Excellent problem-solving skills and ability to work cross-functionally. Strong candidates may also have * Experience in high-volume manufacturing environments. * Familiarity with AI/ML hardware, accelerators, or datacenter-class systems. * Knowledge of system-level testing (thermal, stress, reliability, compliance). * Experience working with contract manufacturers and ODM/OEM partners. Base Compensation Package * $175,000 - $225,000 Benefits * Full medical, dental, and vision packages, with generous premium coverage * Housing subsidy of $2,000/month for those living within walking distance of the office * Daily lunch and dinner in our office * Relocation support for those moving to San Jose (Santana Row) How we’re different Etched believes in the Bitter Lesson. We think most of the progress in the AI field has come from using more FLOPs to train and run models, and the best way to get more FLOPs is to build model-specific hardware. Larger and larger training runs encourage companies to consolidate around fewer model architectures, which creates a market for single-model ASICs. We are a fully in-person team in San Jose (Santana Row), and greatly value engineering skills. We do not have boundaries between engineering and research, and we expect all of our technical staff to contribute to both as needed.

Job Description About Celestial AI As Generative AI continues to advance, the performance drivers for data center infrastructure are shifting from systems-on-chip (SOCs) to systems of chips. In the era of Accelerated Computing, data center bottlenecks are no longer limited to compute performance, but rather the system's interconnect bandwidth, memory bandwidth, and memory capacity. Celestial AI's Photonic Fabric™ is the next-generation interconnect technology that delivers a tenfold increase in performance and energy efficiency compared to competing solutions. The Photonic Fabric™ is available to our customers in multiple technology offerings, including optical interface chiplets, optical interposers, and Optical Multi-chip Interconnect Bridges (OMIB). This allows customers to easily incorporate high bandwidth, low power, and low latency optical interfaces into their AI accelerators and GPUs. The technology is fully compatible with both protocol and physical layers, including standard 2.5D packaging processes. This seamless integration enables XPUs to utilize optical interconnects for both compute-to-compute and compute-to-memory fabrics, achieving bandwidths in the tens of terabits per second with nanosecond latencies. This innovation empowers hyperscalers to enhance the efficiency and cost-effectiveness of AI processing by optimizing the XPUs required for training and inference, while significantly reducing the TCO2 impact. To bolster customer collaborations, Celestial AI is developing a Photonic Fabric ecosystem consisting of tier-1 partnerships that include custom silicon/ASIC design, system integrators, HBM memory, assembly, and packaging suppliers. ABOUT THE ROLE We are seeking an experienced Photonics test engineer that can lead system bring-up, validation and DVT testing for the optics used in Celestial's cutting-edge scale-up network product offerings. This is a cross-functional role, with strong collaboration with the ASIC, AMS, Firmware and Packaging teams to deliver state of the art test and characterization solutions. ESSENTIAL DUTIES AND RESPONSIBILITIES • Own the Photonics test and characterization of high-speed optical networking products and sub-systems that are ushering in the next generation of AI XPU connectivity and are built on the most advanced PICs in the industry., • Work cross-functionally across the organization to demonstrate, validate and troubleshoot key building blocks of Celestial's groundbreaking Photonic FabricTM technology and support new product introduction (NPI) from R&D through to manufacturing test., • Collaborate with ASIC & AMS design and packaging teams to improve device performance and test coverage., • Specialized skills, • Strong experience designing and executing test plans for datacom optical transceivers, photonic integrated circuits (PICs) & optoelectronic subassemblies, with the ability to analyze and understand the resulting data., • Strong experience performing high-speed (56Gbps+/lane) optical and electrical measurements including Bit Error Rate (BER) testing, eye-diagram analysis and link control loop testing., • Strong familiarity with basics of optical characterization, including spectral testing and insertion & return loss measurements., • Strong experience with data analysis tools (JMP, DataConductor or similar), • Ability to automate test setups using standard scripting languages (Python preferred) and to integrate standard instruments (oscilloscopes, BERTs, AWGs, tunable lasers, optical spectrum analyzers etc)., • Familiarity with Analog and Photonics device and circuit design principles is a big plus., • Education requirements, • Minimum MS in engineering or physics. PhD is preferred., • Experience requirements, • Minimum 5 years of relevant experience, • Attributes, • Self-starter, • Thrives in a highly collaborative and dynamic work environment, • Has excellent oral and written communication skills, • Creativity in problem-solving with strong attention to detail LOCATION: Santa Clara, CA For California Location: As an early stage start up, we offer an extremely attractive total compensation package inclusive of competitive base salary, bonus and a generous grant of our valuable early-stage equity. The target base salary for this role is approximately $185,000.00 - $225,000.00. The base salary offered may be slightly higher or lower than the target base salary, based on the final scope as determined by the depth of the experience and skills demonstrated by candidate in the interviews. We offer great benefits (health, vision, dental and life insurance), collaborative and continuous learning work environment, where you will get a chance to work with smart and dedicated people engaged in developing the next generation architecture for high performance computing. Celestial AI Inc. is proud to be an equal opportunity workplace and is an affirmative action employer. #LI-Onsite

Job Description Electrical Hardware Engineer – IVUS Company Position Overview NuevoSono, a T45 Labs portfolio company is seeking an Electrical Hardware Engineer to join our innovative team developing lntravascular Ultrasound (IVUS) systems. The ideal candidate will have hands-on experience in electrical hardware design for medical devices, and will play a key role in all phases of product development, from concept through commercialization, ensuring our devices are robust, reliable, and regulatory compliant. The ideal candidate will thrive in a fast-paced startup environment, be an effective cross-functional collaborator, and have the entrepreneurial drive to make a measurable impact on patient lives and grow with our company. Key Responsibilities System Design & Development • Design, develop, and verify analog, digital, and mixed-signal electronic circuits for IVUS imaging devices., • Create and document circuit schematics, PCB layouts, and bills of materials (BOM)., • Develop and execute test plans for hardware validation and verification., • Support rapid prototyping and iterative design improvements for early-stage product development. Collaboration & Integration • Work closely with firmware, software, and mechanical engineering teams to ensure seamless integration of hardware and system functionality., • Participate in design reviews and provide technical leadership on electrical engineering matters. Regulatory & Quality Compliance • Ensure all hardware designs comply with medical device regulatory standards (e.g., IEC-60601, FDA, CE marking)., • Develop and maintain documentation in accordance with the company’s quality system and design control procedures., • Support risk management activities and ensure electrical safety and EMC compliance. Manufacturing & Support • Support the transition of designs from prototype to manufacturing, including DFM/DFT and process optimization., • Investigate and resolve product complaints, perform root cause analysis, and implement corrective actions., • Collaborate with contract manufacturers and external design partners as needed. Qualifications • Bachelor’s or Master’s degree in Electrical Engineering or a related field., • 3-5 years of experience in electrical hardware development, with a focus on medical devices (IVUS or intravascular catheters preferred)., • Strong knowledge of analog/digital circuit design, PCB layout, and electrical design verification., • Familiarity with medical device standards (IEC 60601, ISO 14971, ISO 13485) and quality systems., • Experience with EMC/EMI design principles and compliance testing., • Excellent problem-solving, communication, and documentation skills., • Ability to work independently and collaboratively in a fast-paced, regulated environment. Preferred Qualifications • Experience with IVUS, intravascular catheters, or other imaging modalities., • Prior involvement in the full product lifecycle from concept to commercial release., • Experience with wireless technologies and battery-powered medical systems., • Experience with EMC testing and electrical safety certification., • Familiarity with risk management tools (DFMEA, FMEA) and design for manufacturability (DFM). Key Attributes • Innovative thinker with strong attention to detail and a commitment to quality., • Proactive, adaptable, and comfortable wearing multiple hats in a small team environment. Eligibility Candidates must be legally authorized to work in the United States without the need for current or future visa sponsorship. We are currently unable to sponsor H-1B visas. Location & Compensation This position is onsite in our Santa Clara, CA office and is open to candidates living within a reasonable commute distance. There is no relocation package. T45 Labs is committed to fair and equitable pay practices, and compensation may include bonuses, equity, and benefits as part of the total rewards package. The anticipated salary range for this position is $140,000 - $190,000 annually, based on San Francisco Bay Area market data. Actual compensation will vary depending on factors such as experience, skills, and geographic location. Equal Employment Opportunity Statement T45 Labs and its affiliated companies are Equal Opportunity Employers. We celebrate diversity and are committed to creating an inclusive environment for all employees. Employment decisions are based on qualifications, merit, and business needs. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected status. Third-Party Recruiter Notice We do not accept unsolicited resumes from staffing agencies or recruiters without a signed agreement in place. Any resumes submitted without such an agreement will be considered property of T45 Labs and/or its affiliated companies, and no fees will be paid if the candidate is hired. If your agency or firm would like to officially submit candidates for any of our posted roles, please email

Job DescriptionSalary: 145,000 - 175,000 Job Description Credos Optical Systems Applications Engineering group is seeking an Optical Systems Validation Engineer to validate Credos DSP devices with high-speed optical components for data rates ranging from 50 Gbps to 224 Gbps and beyond. As an Optical Systems Validation Engineer, you will design optical test hardware, create test procedures, and analyze test results to finalize chip and module configurations used across various applications, including AI and data center applications. As an essential team member, your contribution will be critical to Credos development of high-speed interconnect products for data center applications. Responsibilities • Conduct electrical and optical measurements of optical evaluation boards and modules., • Design and analyze optical and high-speed electrical hardware for optical test stations., • Evaluate optical components (including, but not limited to, various types of lasers, modulators, and receivers)for performance and reliability in reference designs and for feasibility in test systems., • Design and execute engineering validation testing and design validation testing., • Perform failure analysis. Work with contract manufacturers or field applications engineering teams when needed., • Work collaboratively across teams, including Signal Integrity, Thermal, Mechanical, Firmware, and Electrical Engineering. MinimumQualifications • B.S. (Electrical Engineering) with 7+ years of relevant experience or M.S. (Electrical Engineering) with 5+ years of relevant experience., • Strong analog/digital/RF/Optical circuit analysis skills, • Strong background in circuit theory, linear system theory, feedback, ICs, high-speed RF fundamentals, and link budget analysis, • Strong laboratory measurement skills with high-speed optical and electrical test equipment, • Strong communication and presentation skills. Preferred Qualifications: • Experience in optical alignment and fiber coupling., • Strong experience with standard optical test instruments, such as power meters, optical spectrum analyzers, optical variable attenuators, and multi-axial stage positioners, • Strong experience in high-frequency electrical test equipment such as vector network analyzers, digital communication analyzers, spectrum analyzers,, • Good understanding of tolerances, yield analysis, reliability, and failure analysis variation., • Experience in high-speed optical and electrical test and test automation., • Programming skills in one or more of the following: Python, C/C++, MATLAB, or LabVIEW for collecting, analyzing, and presenting data, • Experience in Signal Integrity analysis of high-speed PCBs (Keysight ADS), • Experience in mechanical CAD software (AutoCAD or equivalent), • Experience in Electromagnetic analysis of optoelectronic assemblies (Ansys HFSS), • Experience in PCB layout for high-speed

Job DescriptionCompany Description Arista Networks is an industry leader in data-driven, client-to-cloud networking for large data center, campus and routing environments. What sets us apart is our relentless pursuit of innovation. We leverage the latest advancements in cloud computing, artificial intelligence, and software-defined networking to provide our clients with a competitive edge in an increasingly interconnected world. Our solutions are designed to not only meet the current demands of the digital landscape but to also anticipate and adapt to future challenges. At Arista we value the diversity of thought and perspectives that each employee brings to the table. We believe that fostering an inclusive environment, where individuals from various backgrounds and experiences feel welcome, is essential for driving creativity and innovation. Our commitment to excellence has earned us several prestigious awards, such as Best Engineering Team, Best Company for Diversity, Compensation, and Work-Life Balance. At Arista, we take pride in our track record of success and strive to maintain the highest standards of quality and performance in everything we do. Job Description We are seeking a highly skilled and motivated Senior Optical System Test Engineer to join our hardware engineering team. In this role, you will be responsible for the design, development, and execution of test and validation plans for advanced optical sub-systems, including PICs, linear drivers, linear TIAs, and DSPs, supporting next-generation high-speed optical transceivers and photonic systems. This role is critical in bridging the gap between R&D and productization, ensuring that our optical components and sub-systems meet the highest standards of performance, reliability, and manufacturability. Key Responsibilities: * Develop and execute test plans for validating the performance and functionality of: * Photonic Integrated Circuits (PICs) * High-speed optical drivers * Transimpedance Amplifiers (TIAs) * DSPs • Characterize optical and electrical performance metrics such as insertion loss, extinction ratio, jitter, gain, bandwidth, and SNR., • Set up and automate optical/electrical test stations using high-speed instrumentation and scripting tools (Python, LabVIEW, MATLAB, etc.)., • Work with cross-functional teams (photonic design, analog/RF design, packaging, firmware) to define test requirements and optimize test coverage., • Conduct stress, reliability, and environmental testing (temperature cycling, aging, vibration) for optical components and assemblies., • Perform high-speed eye diagram analysis, TDECQ, RIN, and receiver sensitivity testing., • Develop automation frameworks for regression testing and continuous validation in both lab and production environments., • Analyze test results and generate detailed reports to support design reviews and product qualification., • Support failure analysis and root cause investigations during design validation and product ramp-up phases., • Collaborate with manufacturing teams to transfer test procedures and support volume production test development.Qualifications, • Bachelor’s degree in Optical Engineering, Electrical Engineering, Physics, or a closely related field., • Minimum of 3 years of hands-on experience in optical system or component-level testing. Direct experience in testing and characterizing: * PICs (e.g., SOI, InP, or SiN platforms) * Optical driver ICs * Transimpedance Amplifiers (TIAs) * Strong familiarity with optical communication principles, including NRZ/PAM4 modulation, dispersion, OSNR, and jitter. * Proficiency with lab instrumentation, including: * Optical Spectrum Analyzer (OSA) * BERT, DCA, high-speed oscilloscopes * Tunable lasers, power meters, VOA * Network analyzers and probes for high-speed electrical testing • Experience with scripting and test automation using Python, MATLAB, LabVIEW, or similar., • Understanding of industry standards such as IEEE 802.3, QSFP-DD, OSFP, and CMIS., • Strong analytical skills and ability to work independently to troubleshoot and resolve technical issues., • Master’s or Ph.D. in Optical or Electrical Engineering. Experience with: * Silicon photonics-based PICs * Coherent optical systems * DSP-based transceivers * * High-speed transceiver testing at 100G, 400G, 800G, or 1.6T • Knowledge of DSP tuning (FIR filters, DFE, CTLE) and eye diagram optimization., • Familiarity with simulation tools such as ADS, HFSS, Lumerical, or COMSOL., • Experience in component-level reliability testing and qualification protocols. The new hire base pay for this role has a salary range of $140,000 to $198,000. Arista offers different pay ranges based on work location, so that we can offer consistent and competitive pay appropriate to the market. The actual base pay offered will be based on a wide range of factors, including skills, qualifications, relevant experience, and work location. The pay range provided reflects base pay only and in addition certain roles may also be eligible for discretionary Arista bonuses and equity. Employees in Sales roles are eligible to participate in Arista’s Sales Incentive Plan, which pays commissions calculated as a percentage of eligible sales. US-based employees are also entitled to benefits including medical, dental, vision, wellbeing, tax savings and income protection. The recruiting team can share more details during the hiring process specific to the role and location. #LI-GR1 Additional Information Arista Networks is an equal opportunity employer. Arista makes all hiring and employment-related decisions in a non-discriminatory manner without regard to race, color, religion, sex, sexual orientation, gender identity, national origin or any other factor determined to be unlawful under applicable federal, state, or law law. All your information will be kept confidential according to EEO guidelines.

Job Description Union Technologies is reindustrializing America’s defense manufacturing base with a first-of-its-kind Factories-as-a-Stockpile™ model, integrating advanced robotics, manufacturing, and software into sovereign factory systems at scale. Headquartered in Dallas, Texas, UNION is dedicated to restoring America’s industrial strength and guaranteeing deterrence for the century ahead. We recently emerged from stealth with $50M in funding led by top-tier venture investors and strategic partners. Read more in our Press Release Overview We need a Staff Security Engineer - Industrial Control Systems to design and implement practical compliance solutions enabling industrial automation equipment (PLCs, CNCs, Robots, HMIs, SCADA systems, Control Cabinets) to operate securely and reliably in a CMMC Level 2, ITAR-controlled environment with rich MES connection. This is a senior IC role. You will directly own compliance for critical defense-related production lines. Responsibilities * Compliant Production Line on Day 1— Take advantage of a greenfield build to land equipment that is compliant on Day 1 * Invent & implement solutions for the missing controls that let PLCs, CNCs, robots, HMIs, and SCADA join a CMMC Level 2 network on Day 1— no waivers, no delays. * Author, own, and iterate a vendor-consumable spec (hardware, network, and procedures) that survives FAT, site acceptance, and yearly audits. * Embed with vendors— drive design reviews, cabinet builds, and every FAT until the crate ships. * Sustain compliance—automate patching, credential rotation, evidence collection, and CMMC artifact prep * Deliver the outcome— leverage consultants or specialists to achieve the outcome as you see fit Requirements * Shipped at least one hardware + software security product that protects OT or critical infrastructure (network appliance, secure gateway, or similar). * Hands-on with ICS/OT stacks: EtherNet/IP, Modbus/TCP, OPC UA, CNC file transfer, cabinet power/grounding, switch configs, industrial networking. * Proven track record translating NIST 800-171/172 or CMMC L2 (in force 16 Dec 2024) into run-time controls * U.S. Persons status * 40% travel to vendor plants and FATs— no exceptions. Bonus Requirements * Systems-level engineering in C/C++, Rust, or Go on Linux-based platforms plus basic HDL/Firmware literacy. Join the mission. We'll handle the move. Exceptional talent shouldn't be bound by geography. If you're ready to relocate to Dallas, TX and join us in reindustrializing America’s defense backbone, we'll make it easy—and for those who move quickly, additional incentives may be available. Compensation Range: $132K - $233K

Job Description Summary Join an ambitious, experienced team of silicon and distributed systems experts as a design verification engineer. You have the opportunity to build a groundbreaking new category of product that revolutionizes the performance and scalability of next-generation distributed computing systems, and to help solve key infrastructure challenges facing our customers. We are looking for talented, motivated candidates with experience building comprehensive verification frameworks and executing simulation test plans for large-scale networking and computing chips, and who are looking to grow in a fast paced, dynamic startup environment. Default location is Mountain View, CA, but we are equally open to remote candidates. Roles & Responsibilities • Work in the SOC DV team to perform end to end verification of a large SOC., • Define and review a comprehensive SOC verification plan, including the test strategy, specific test cases, and coverage metrics., • Experience with large SOC verification., • Familiar with SystemVerilog/UVM, • Minimum 3 years of experience in the ASIC verification field, • Experience with block to SOC verification reuse methodology is a plus., • Experience with firmware based verification is a plus, • Experience with large scale SOC TB performance optimization is a plus, • Experience with high speed interface protocol like PCIE/CXL/DDR/Ethernet is a plus, • Experience with ARM SOC bring up is a plus. Powered by JazzHR 0rpsasCjZ5

Job Description We are CARIAD, an automotive software development team with the Volkswagen Group. Our mission is to make the automotive experience safer, more sustainable, more comfortable, more digital, and more fun. To achieve that we are building the leading tech stack for the automotive industry and creating a unified software platform for over 10 million new vehicles per year. We're looking for talented, digital minds like you to help us create code that moves the world. Together with you, we'll build outstanding digital experiences and products for all Volkswagen Group brands that will transform mobility. Join us as we shape the future of the car and everyone around it. Role Summary: The Staff Hardware Engineer, Radio Frequency (Contract) is responsible for the development, testing, and optimization of RF systems and circuits within CARIAD's Hardware Platform Development team. This role requires expertise in RF design, antenna tuning, EMI/EMC mitigation, and system integration to ensure high-performance wireless communication and signal integrity in hardware products. Role Responsibilities: RF Design & Development • Design, simulate, and optimize RF circuits, antennas, and transmission lines for high-frequency applications., • Select, tune, and integrate antennas to ensure optimal wireless performance and signal integrity in hardware designs. Supports PCB design for RF applications, ensuring best practices for high-frequency layout., • Develops RF system architectures, considering noise reduction, impedance matching, and power efficiency for reliable signal transmission, • Assists in supplier evaluation and selection of RF components, based on manufacturability and compliance with industry standards., • Conducts RF measurements and performance evaluations using network analyzers, spectrum analyzers, and signal generators to verify circuit functionality, • Diagnoses and troubleshoots RF-related hardware issues, including signal integrity and interference challenges., • Supports EMI/EMC compliance testing and mitigation, ensuring products meet regulatory standards (FCC, CE, etc.)., • Develops and executes RF test plans, ensuring system reliability under various real-world operating conditions., • Analytical and conceptual thinking, • Experience in developing strategies for R&D, • Communication skills - interpersonal, presentation and written, • Integration - joining people, processes or systems, • Influencing and negotiation skills, • Proficiency in using RF test equipment (e.g., network analyzers, spectrum analyzers, signal generators), • Strong understanding of RF circuit design, impedance matching, and transmission line theory, • Experience in PCB design for RF applications, including layout best practices for high-frequency circuits, • Familiarity with wireless communication standards (e.g., Wi-Fi, Bluetooth, LTE, 5G)., • Knowledge of EMI/EMC mitigation techniques for RF systems. Knowledge of embedded system software architecture, real-time operating systems, and web framework components and its interfaces, • Knowledge of connected HPC software components and its peripherals, • Knowledge of connected vehicle infotainment and communication software systems., • Experience with RF simulation tools (e.g., ADS, HFSS, CST, or similar), • Knowledge of low-noise amplifiers (LNA), power amplifiers (PA), and RF filters, • Experience in automated RF testing and scripting (Python, MATLAB), • This is a contract W2 position, • This role is based in Mountain View, CA. Must be local, no relocation., • Immediate availability is required. The selected candidate is expected to start promptly upon offer acceptance and pending successful completion of a standard background check and drug screening, • Applicants must be currently authorized to work in the United States on a full-time basis. We are unable to provide visa sponsorship now or in the future CARIAD is an Equal Opportunity Employer. We welcome and encourage applicants from all backgrounds, and do not discriminate based on race, sex, age, disability, sexual orientation, national origin, religion, color, gender identity/expression, marital status, veteran status, or any other characteristics protected by applicable laws.

Job DescriptionSalary: 165,000 - 190,000 About the job The Optical Validation Group focuses on the design verification of digital and analog ICs ability to drive optical components, including but not limited to laser diode, photodiode, modulators, etc. We are looking for an Optical Validation Engineer to construct optical related test stations, create test procedures, and analyze test results. As an Optical Testing Engineer, you will contribute to Credos development of high-speed products for data center application. Optical Validation Engineer Responsibilities: • Conduct electrical design & measurements of optical evaluation boards and modules., • Integration of optical, hardware and firmware, debugging and troubleshooting of optical modules., • Create drawings, BOM and ECO to document design. Collaborate with program manager, buyer/planner, suppliers to make sure designed parts are available in timely manner for build., • Design and execute engineering validation testing and design validation testing., • Perform failure analysis. Work with contract manufacturer or application engineering team when needed., • Work in a collaborative environment across teams including Singal Integrity, Thermal, Mechanical, and EE. Minimum Qualifications: • B.S. (Electrical Engineering, Optical Engineering) with 5+ years of relevant experience or M.S. (Electrical Engineering, Optical Engineering) with 3+ years of relevant experience., • Strong analog/digital circuit design skills, • Strong background of circuit theory, linear system theory, feedback, ICs, and high-speed RF fundamentals, • Strong laboratory measurement skills, • Strong communication and presentation skill Preferred Qualifications: • Experience in optical alignment and fiber coupling., • Strong experience with common optical test instruments, such as power meter, optical spectrum analyzer, optical variable attenuator, multi-axial stage, etc., • Good understanding in tolerance, yield, reliability and failure analysis., • Experience in high-speed optical and electrical test and test automation., • Programming skills in one or more of the following: Python, C/C++, MATLAB, or LabVIEW., • Experience in optical simulation with OpticStudio (Zemax)., • Experience in mechanical software (Solidworks).

Enabling the movement towards advanced chip design, KLA's Global Products Group (GPG), which is responsible for creating all of KLA's metrology and inspection products, is looking for the best and the brightest research scientist, software engineers, application development engineers, and senior pro

Plan, develop, and execute test procedures for prototype and pre-production hardware (PCBs, modules, and systems). Collaborate with hardware, firmware, and mechanical engineers to identify, root cause, and resolve design issues. The Electrical Engineer in the EVT group will be responsible for valida

Embedded Systems Validation Test Engineer (Python) Description In this role you will test and validate firmware and drivers for common firmware interfaces, chipsets, communications protocols and various SoC IPs. Qualifications 2–8+ years of experience in developing and testing embedded systems/dev

Plan, develop, and execute test procedures for prototype and pre-production hardware (PCBs, modules, and systems). Collaborate with hardware, firmware, and mechanical engineers to identify, root cause, and resolve design issues. The Electrical Engineer in the EVT group will be responsible for valida

We are looking for a strong technical Firmware engineer to own firmware development for embedded controllers. Designing, implementing, and delivering Embedded Controller (EC) firmware for notebooks. Experience implementing Embedded Controller (EC) firmware.

Job DescriptionCompany Description Arista Networks is an industry leader in data-driven, client-to-cloud networking for large data center, campus and routing environments. What sets us apart is our relentless pursuit of innovation. We leverage the latest advancements in cloud computing, artificial intelligence, and software-defined networking to provide our clients with a competitive edge in an increasingly interconnected world. Our solutions are designed to not only meet the current demands of the digital landscape but to also anticipate and adapt to future challenges. At Arista we value the diversity of thought and perspectives that each employee brings to the table. We believe that fostering an inclusive environment, where individuals from various backgrounds and experiences feel welcome, is essential for driving creativity and innovation. Our commitment to excellence has earned us several prestigious awards, such as Best Engineering Team, Best Company for Diversity, Compensation, and Work-Life Balance. At Arista, we take pride in our track record of success and strive to maintain the highest standards of quality and performance in everything we do. Job Description Who You’ll Work With You will collaborate closely with hardware architects, optical and electrical engineers, and system software teams to define and implement module behavior that meets demanding performance, power, and reliability targets. What You’ll Do Arista Networks is seeking a highly motivated and skilled Senior Optical Transceiver Firmware Engineer to develop embedded software and firmware for next-generation optical modules and engines operating at 1.6Tbps and beyond. This engineer will play a key role in enabling the performance, manageability, and integration of advanced optical transceivers that power Arista’s high-speed networking products. In this role, you will be responsible for developing low-level firmware for optical modules, including control, monitoring, diagnostics, and communication protocols (such as CMIS, I2C, MDIO). • Design, develop, and debug embedded firmware for optical transceiver modules (e.g., OSFP, QSFP-DD, OSFP)., • Implement firmware features to support CMIS, I2C/MDIO communication, module control, diagnostics, and alarms., • Define firmware architecture and requirements in collaboration with optical hardware, electrical, and system teams., • Develop and maintain automation tools for testing and validating firmware functionality and compliance., • Collaborate with manufacturing and operations teams to support production testing, module calibration, and field upgrades., • Ensure firmware meets reliability, security, and power efficiency targets., • Participate in code reviews, documentation, and design discussions., • Stay current with industry standards (CMIS, MSA, IEEE) and contribute to internal adoption of new features.Qualifications, • Bachelor’s degree in Electrical Engineering, Computer Engineering, or a related field., • 5+ years of experience in embedded firmware/software development, with a focus on hardware-level control systems., • Strong proficiency in C/C++ programming for embedded systems., • Experience working with optical transceivers or related modules (e.g., QSFP, OSFP, OSFP)., • In-depth knowledge of communication protocols such as I2C, MDIO, SPI, and experience working with CMIS/PMBus., • Familiarity with optical module diagnostics, alarms, monitoring, and calibration routines., • Strong debugging skills using tools such as logic analyzers, bus analyzers, and oscilloscopes. The new hire base pay for this role has a salary range of $140,000 to $198,000. Arista offers different pay ranges based on work location, so that we can offer consistent and competitive pay appropriate to the market. The actual base pay offered will be based on a wide range of factors, including skills, qualifications, relevant experience, and work location. The pay range provided reflects base pay only and in addition certain roles may also be eligible for discretionary Arista bonuses and equity. Employees in Sales roles are eligible to participate in Arista’s Sales Incentive Plan, which pays commissions calculated as a percentage of eligible sales. US-based employees are also entitled to benefits including medical, dental, vision, wellbeing, tax savings and income protection. The recruiting team can share more details during the hiring process specific to the role and location. #LI-GR1 Additional Information Arista Networks is an equal opportunity employer. Arista makes all hiring and employment-related decisions in a non-discriminatory manner without regard to race, color, religion, sex, sexual orientation, gender identity, national origin or any other factor determined to be unlawful under applicable federal, state, or law law. All your information will be kept confidential according to EEO guidelines.

Job Description Embedded Software Engineer – Nvidia platforms As an Embedded Software Engineer, you will be responsible for developing and integrating software for our cutting-edge autonomous driving platform. You will work closely with cross-functional teams to ensure the seamless operation of our embedded systems. This role requires a deep understanding of embedded software development, hardware integration, and system-level testing. Responsibilities: • Participate in design reviews and help with board bring up activities, • Using the reference design and SDK documentation, build DRIVE OS, and configure hypervisors., • Understand power up sequence, secure boot process and implement FW updates, • Implement manufacturing tests, diagnostics and benchmarking firmware, • Develop, debug and configure device drivers for SoC peripherals, • Bachelor's or higher degree in Computer Science, Electrical Engineering, or related field., • Extensive experience in embedded software development for Nvidia SoC Xavier/Orin/Thor., • Proficiency in C/C++ and Python., • Experience with Nvidia DRIVE OS and Drive Works., • Knowledge of Linux, Yocto, kernel, and driver development.Super Bonus: Having a embedded security background on top Estimated Min Rate: $70.00 Estimated Max Rate: $100.00 What’s In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: • Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week), • Health Savings Account (HSA) (for employees working 20+ hours per week), • Life & Disability Insurance (for employees working 20+ hours per week), • MetLife Voluntary Benefits, • Employee Assistance Program (EAP), • 401K Retirement Savings Plan, • Direct Deposit & weekly epayroll, • Referral Bonus Programs Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. Company DescriptionFounded in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations. Company Website: in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations.\r\nCompany Website:

Job Description Do you want to be at the forefront of the AI revolution? Etched.ai is developing groundbreaking hardware that will power the next generation of artificial intelligence. Etched was founded on the belief that new hardware will be needed to run human- and superhuman-level artificial intelligence. Our ASIC systems deliver orders of magnitude higher performance than conventional AI chips. Etched is actively developing Sohu, an ASIC exclusively for transformers, which will enable products that would be impossible with GPUs, like real-time video generation models and extremely deep chain-of-thought reasoning. And we're bringing this technology to market in months, not years. Sohu is hard-coded for individual model architectures and only supports transformers, but has an order of magnitude more throughput and lower latency than a B200. We're searching for passionate software engineers to join our fast growing team. You'll have the opportunity to: • Design cutting-edge software optimizing the performance of our Sohu chip and unlocking the full potential of very large transformer models., • Co-Develop with a world-class team of hardware and software engineers to push the boundaries of AI technology., • Solve challenging problems across the full stack, from low-level drivers and APIs to high-level applications and frameworks., • Review code developed by other engineers and provide feedback to ensure best practices (e.g., style guidelines, checking code in, accuracy, testability, and efficiency)., • Strong programming skills in C++, Rust, and/or Python, • Experience with embedded systems, high-performance computing or distributed systems., • Deep understanding of computer architecture and operating systems, • Bachelor's degree or equivalent practical experience., • 8 years of experience in software development, and with data structures/algorithms., • 5 years of experience testing, and launching software products, and 3 years of experience with software design and architecture., • 5 years of experience with firmware design, implementation, and troubleshooting., • Master's degree or PhD in Engineering, Computer Science, or a related technical field., • 3 years of experience in a technical leadership role leading project teams and setting technical direction., • Experience with Java or Go, with the ability to resolve customer-related issues., • Experienced in developing solutions to ambiguous problems with significant impact., • Be part of a dynamic startup that's changing the landscape of AI., • Work on the most advanced AI hardware in the world., • Enjoy a competitive salary and benefits package. To Apply: Please visit our website at etched.ai/careers to submit your resume and cover letter. Location: Cupertino, California

Job DescriptionSalary: DOE Firmware Engineer(entry level) Are you passionate about development and project-based work? Do you like a significant challenge? We offer this and much, much more. Our teams work with cutting-edge NAND SSD controllers and storage systems We are searching for brilliant Software Developers (0-3 years experience) to join our Firmware Development Team at Bay Area site, San Jose, CA. New grad welcomed! We are looking for forward thinkers and critical players who learn, grow, and make your contributions. Firmware Developer technical skills: • Good programming capability in C, • Experience or good understanding of embedded systems, • Experience or good understanding of PCIe/NAND/SMBus/UART/SPI protocols, • BS in Computer Science, or EE About Innogrit Corporation Innogrit is transforming data storage with its advanced PCIe Gen 3 and Gen 4 SSD (Solid State Drive) Processors. By delivering unprecedented reliability, performance, and energy efficiency, SSDs based on Innogrits technology unleash the full potential for next generation SSDs using the latest NAND flash memory.

Job DescriptionDescriptionPrecision Neuroscience is pioneering a brain implant, known as a brain-computer interface (BCI), to restore communication and independence for people with neurological conditions. Our cutting-edge technology is designed to empower people with paralysis to control digital devices—such as computers and smartphones—with their thoughts alone, opening new possibilities for daily life. Precision’s multidisciplinary team brings together leading experts in diverse fields such as neurosurgery, artificial intelligence, machine learning, microfabrication, electrical engineering, and more. We are committed to turning breakthrough scientific advancements into real-world solutions for people affected by conditions such as spinal cord injury, stroke, and ALS. As a Precision employee, you will be joining one of the fastest moving and best-capitalized companies in the emerging field of BCI. Since our founding in 2021, Precision has secured over $155 million in funding, developed and validated our technology, and initiated human trials in collaboration with some of the nation’s top hospitals. We are seeking a Senior Firmware Quality Engineer to help build and test the embedded software that makes our BCI technology possible. In this role you will collaborate cross-functionally with multiple high performing groups of team members that are experienced with working on complex and exciting projects within the medical device and brain-computer interface fields. This position will be based in our Santa Clara, California office. We are unable to consider remote workers or people not currently based in the United States, with working rights. Key Responsibilities • Facilitates and completes design control tasks in collaboration with the Firmware Engineering Team., • Participate in regular Scrum events such as sprint planning, review, and retrospective., • Collaborates with software developers, hardware engineers and regulatory affairs to create integration tests for new features., • Develop, review, and execute test plans, test cases, and test scripts for embedded firmware used in or as medical devices., • Participate in design reviews, risk assessments, and requirements analysis to ensure testability and compliance., • Applies and adheres to IEC 62304/FDA guidance in developing firmware integration protocols/reports., • Use lab equipment (e.g., oscilloscopes, logic analyzers, simulators) to test and debug embedded systems., • Generates and maintains Quality documentation associated with software/firmware engineering., • Completes software level-debug of software components/hardware., • Assists in troubleshooting software problems., • Documents and communicates test results, and track software bugs and their resolution., • Safety is at the heart of our ethos at Precision - and it is for you too. Candidates for this role must have a strong background in software testing; you will be helping build infrastructure for automated system verification. Skills, Knowledge and ExpertiseRequired: • Bachelor’s degree in Electrical Engineering, Computer Science, Biomedical Engineering, or related field., • 3+ years of experience in firmware/embedded software testing., • Experience in medical device development or other regulated industry (FDA, ISO 13485)., • Working knowledge of IEC 62304, ISO 14971, ISO 13485 and FDA and EU guidance and regulations related to medical device software., • Demonstrated scripting ability in Python, • Familiarity with embedded C/C++, real-time operating systems, and hardware-software integration., • Proficient with test tools and frameworks (e.g., Python, CUnit, Jenkins, Jira, TestRail)., • Excellent analytical, troubleshooting, and documentation skills. Preferred: • Experience with automated testing for embedded systems., • Knowledge of risk management per ISO 14971., • Familiarity with cybersecurity and software updates in connected medical devices.Diverse workforces create the best culture, company, and products. We at Precision are committed to an inclusive culture that celebrates the uniqueness and contributions of everyone. As an equal opportunity employer, Precision does not discriminate on the basis of sex, race, religion, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description Please Note: To provide the best candidate experience amidst our high application volumes, each candidate is limited to 10 applications across all open jobs within a 6-month period. Advancing the World's Technology Together Our technology solutions power the tools you use every day--including smartphones, electric vehicles, hyperscale data centers, IoT devices, and so much more. Here, you'll have an opportunity to be part of a global leader whose innovative designs are pushing the boundaries of what's possible and powering the future. We believe innovation and growth are driven by an inclusive culture and a diverse workforce. We're dedicated to empowering people to be their true selves. Together, we're building a better tomorrow for our employees, customers, partners, and communities. The Technology Enabling Development Lab (TED) Our core development focus is the host interface firmware layer that sits in the intersection of system software and flash management firmware. This key host interface firmware technology drives Samsung's breakthrough V-NAND technology and enables our customers to power performance-oriented, demanding, enterprise-class applications ranging from hyper-scale data centers, to big data processing, to software defined virtualized storage arrays and infrastructures. Location: Daily onsite presence at our San Jose, CA office / U.S. headquarters in alignment with our Flexible Work policy. What You'll Do • NVMe or SAS SSD Firmware development, • Analyze, debug, and resolve firmware issues observed at domestic and international customer sites as well as at local and overseas development centers., • Triage and root cause system, driver, and device interoperability issues at customer sites., • OEM Spec gap analysis, firmware customization/feature development; collaborate with other engineering teams to analyze debug information and implement and deploy firmware patches., • Need based business travel and stay at domestic and international customer sites as well as overseas development centers for extended periods of time (can be up to multiple weeks at a time), • Assist customers by running or inspecting their tests at onsite locations. What You Bring • BS in Computer/Electrical/Electronic Engineering or Computer Science, and 5 years of relevant experience in software or firmware or a MS in Computer/Electrical/Electronic Engineering or Computer Science with 3 years of relevant experience is required., • Strong experience in C/C++ programming for embedded systems is required., • Strong experience with UART/JTAG/ICE debuggers, and protocol analyzers, • Familiarity with at least one of the storage protocols such as SAS / SATA / SCSI / FC / NVMe / PCIe protocols is required, • Hands on experience with UART/JTAG/ICE debuggers, firmware debugging and protocol analyzers, • Demonstrated ability to work as a team player, as part of a local and globally distributed team., • Open to frequent and possible extended domestic and/or international travel., • Resourceful Achiever: self-driven and proactive, you apply logic and reason to effectively solve problems and manage risks., • Avid Learner: you eagerly take on new challenges and seek out opportunities to grow and stretch, • Passionate Owner: you are energized by your work, taking ownership and delivering results without ego, • Committed Collaborator: with a positive attitude and commitment to get to the best result, you welcome ideas from others and drive processes forward in an inclusive manner. #LI-VL1 What We Offer The pay range below is for all roles at this level across all US locations and functions. Individual pay rates depend on a number of factors—including the role's function and location, as well as the individual's knowledge, skills, experience, education, and training. We also offer incentive opportunities that reward employees based on individual and company performance. This is in addition to our diverse package of benefits centered around the wellbeing of our employees and their loved ones. In addition to the usual Medical/Dental/Vision/401k, our inclusive rewards plan empowers our people to care for their whole selves. An investment in your future is an investment in ours. Give Back With a charitable giving match and frequent opportunities to get involved, we take an active role in supporting the community. Enjoy Time Away You'll start with 4+ weeks of paid time off a year, plus holidays and sick leave, to rest and recharge. Care for Family Whatever family means to you, we want to support you along the way—including a stipend for fertility care or adoption, medical travel support, and an errand service. Prioritize Emotional Wellness With on-demand apps and paid therapy sessions, you'll have support no matter where you are. Stay Fit Eating well and being active are important parts of a healthy life. Our onsite Café and gym, plus virtual classes, make it easier. Embrace Flexibility Benefits are best when you have the space to use them. That's why we facilitate a flexible environment so you can find the right balance for you. Base Pay Range$134,400—$201,600 USD Equal Opportunity Employment Policy Samsung Semiconductor takes pride in being an equal opportunity workplace dedicated to fostering an environment where all individuals feel valued and empowered to excel, regardless of race, religion, color, age, disability, sex, gender identity, sexual orientation, ancestry, genetic information, marital status, national origin, political affiliation, or veteran status. When selecting team members, we prioritize talent and qualities such as humility, kindness, and dedication. We extend comprehensive accommodations throughout our recruiting processes for candidates with disabilities, long-term conditions, neurodivergent individuals, or those requiring pregnancy-related support. All candidates scheduled for an interview will receive guidance on requesting accommodations. Recruiting Agency Policy We do not accept unsolicited resumes. Only authorized recruitment agencies that have a current and valid agreement with Samsung Semiconductor, Inc. are permitted to submit resumes for any job openings. Applicant Privacy Policy

Job Description ABOUT THE ROLE As Senior Firmware Engineer, you will be a key player in the architecture and the full lifecycle development of an AI platform system, including requirements, design, code, and test. In this role, you will be part of a team developing next generation AI/ML solutions using Client's AI Photonic Fabric Architecture. You will be responsible for developing production-grade firmware for Client's photonic fabric product lineup and developing firmware APIs for resource management and optimization. You will collaborate closely with hardware and software teams to implement the communication management software for different Photonic Fabric use cases. ESSENTIAL DUTIES AND RESPONSIBILITIES • Demonstrate best practices in software development and documentation to deliver high-quality software on tight schedules while meeting all requirements., • Actively engage in code reviews, discussions to share knowledge, and improve code quality, • Participate in gathering technical requirements, contributing to firmware and software design specifications, • Provide support to both internal and external SW and HW development teams, • Provide guidance on test plans for lab characterization once design comes back from fab QUALIFICATIONS • Bachelor's degree with 8+ years of experience, or Master's degree with 6+ years of experience in Computer Science, Electrical Engineering, Information Technology or a related technical field., • At least 5 years of hands-on experience in firmware or embedded software development., • Deep proficiency in C (required) and/or C++ (highly desired) for embedded systems., • Demonstrated experience with microcontroller architectures (e.g., ARM Cortex-M/R/A, ESP32, RISC-V) and their peripherals. You understand the nuances of clocking, interrupts, DMA, and memory-mapped registers., • Proven ability to debug complex hardware/firmware issues on the bench using:, • In-circuit debuggers (JTAG/SWD) with GDB., • Oscilloscopes: Experience reading signal waveforms, verifying timing, and identifying glitches., • Logic Analyzers: For decoding digital bus traffic (SPI, I2C, UART)., • Multimeters/Power Supplies: For basic electrical troubleshooting., • Experience in writing bare-metal drivers and working directly with device registers., • Familiarity with version control systems (Git preferred) and bug tracking tools., • Strong problem-solving skills with an investigative, "get to the bottom of it" mindset., • Excellent communication skills, both written and verbal, for collaborating with hardware, QA, and software teams. California Pay Range$185,000—$225,000 USD

Job DescriptionCompany Description Axiado is an AI-enhanced security processor company redefining the control and management of every digital system. The company was founded in 2017, and currently has 100+ employees. At Axiado, developing great technology takes more than talent: it takes amazing people who understand collaboration, respect each other, and go the extra mile to achieve exceptional results. It takes people who have the passion and desire to disrupt the status quo, deliver innovation, and change the world. If you have this type of passion, we invite you to apply for this job. Job Description We are seeking a highly skilled Security Software Engineer with expertise in Trusted Platform Modules (TPM), Firmware Attestation, and Root of Trust (RoT). The ideal candidate will have hands-on experience with TPM firmware and protocols and will be responsible for designing, implementing, and maintaining robust security solutions to protect hardware, firmware, and software integrity. Key Responsibilities: * Develop, integrate, and maintain security solutions focused on TPM, firmware attestation, and Root of Trust (RoT). * Implement and optimize TPM firmware and protocols to ensure robust device security. * Conduct threat modeling, risk assessments, and vulnerability analysis on firmware security components. * Work closely with hardware and firmware teams to ensure secure lifecycle management of embedded devices. * Develop secure firmware update mechanisms with integrity verification. * Automate security validation and compliance testing for TPM and firmware security features. * Stay updated on industry security standards and protocols (e.g., TCG, NIST, FIPS, ISO 27001) and implement best practices. Qualifications * Bachelor’s or Master’s degree in Computer Science. * 10+ years of experience in security software development with a focus on firmware and hardware security. * Hands-on experience with TPM firmware and protocols (TPM 2.0). * Proficiency in C, for low-level security software development. * Strong understanding of cryptographic algorithms, secure key management, and hardware-backed security. * Familiarity with UEFI/BIOS security, secure enclave technologies, and embedded security solutions. * Knowledge of security vulnerabilities, mitigations, and industry best practices. * Experience working with open-source TPM stacks is a plus. Additional Information Axiado is committed to attracting, developing, and retaining the highest caliber talent in a diverse and multifaceted environment. We are headquartered in the heart of Silicon Valley, with access to the world's leading research, technology and talent. We are building an exceptional team to secure every node on the internet. For us, solving real-world problems takes precedence over purely theoretical problems. As a result, we prefer individuals with persistence, intelligence and high curiosity over pedigree alone. Working hard and smart, continuous learning and mutual support are all part of who we are. Axiado is an Equal Opportunity Employer. Axiado does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

Job DescriptionCompany Description Axiado is an AI-enhanced security processor company redefining the control and management of every digital system. The company was founded in 2017, and currently has 100+ employees. At Axiado, developing great technology takes more than talent: it takes amazing people who understand collaboration, respect each other, and go the extra mile to achieve exceptional results. It takes people who have the passion and desire to disrupt the status quo, deliver innovation, and change the world. If you have this type of passion, we invite you to apply for this job. Job Description We are seeking an experienced Sr. Staff Firmware Engineer with deep expertise in Platform Firmware Resiliency (PFR) standard to lead the design, development, and optimization of secure firmware solutions that meet the required compliance standards. The ideal candidate will have hands-on experience with TPM, Firmware Signing, Attestation, and Root of Trust, and will be responsible for designing, implementing, and maintaining robust security solutions to protect hardware, firmware, and software integrity. Key Responsibilities: * Own PFR architecture and implementation for multiple product lines. * Design and develop secure firmware modules that implement protections for BIOS, FPGA, BMC, and other critical platform firmware. * Integrate and validate hardware root-of-trust solutions (e.g., Intel PFR, TPM, cryptographic accelerators). * Implement firmware recovery mechanisms to restore integrity after detection of corruption or compromise. * Perform threat modeling and risk assessments specific to firmware-level attacks. * Develop test strategies for validating PFR capabilities, including attack simulation and penetration testing. * Ensure compliance with NIST SP 800-193 and relevant platform security guidelines. * Collaborate with cross-functional teams (hardware, BIOS, security, cloud) to ensure seamless integration of PFR features. * Mentor engineers in firmware security principles, secure coding practices, and resiliency design patterns. Qualifications * Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, or related field. * 20+ years of experience in embedded software development, with a strong background in C/C++. * Strong understanding of Platform Firmware Resiliency concepts and NIST SP 800-193 requirements. * Experience with secure boot, measured boot, and cryptographic verification of firmware. * Familiarity with UEFI/BIOS architecture, BMC firmware, and FPGA firmware update flows. * Hands-on experience with hardware root-of-trust solutions (e.g., Intel PFR, TPM 2.0). * Strong debugging skills, including use of JTAG, logic analyzers, and protocol analyzers. * Experience with Intel Server Platform Services (SPS) or similar management engines is a plus. * Familiarity with secure firmware update protocols (e.g., capsule updates, signed images). * Knowledge of supply chain security for firmware components. Additional Information Axiado is committed to attracting, developing, and retaining the highest caliber talent in a diverse and multifaceted environment. We are headquartered in the heart of Silicon Valley, with access to the world's leading research, technology and talent. We are building an exceptional team to secure every node on the internet. For us, solving real-world problems takes precedence over purely theoretical problems. As a result, we prefer individuals with persistence, intelligence and high curiosity over pedigree alone. Working hard and smart, continuous learning and mutual support are all part of who we are. Axiado is an Equal Opportunity Employer. Axiado does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

Job DescriptionCompany Description Arista Networks is an industry leader in data-driven, client-to-cloud networking for large data center, campus and routing environments. What sets us apart is our relentless pursuit of innovation. We leverage the latest advancements in cloud computing, artificial intelligence, and software-defined networking to provide our clients with a competitive edge in an increasingly interconnected world. Our solutions are designed to not only meet the current demands of the digital landscape but to also anticipate and adapt to future challenges. At Arista we value the diversity of thought and perspectives that each employee brings to the table. We believe that fostering an inclusive environment, where individuals from various backgrounds and experiences feel welcome, is essential for driving creativity and innovation. Our commitment to excellence has earned us several prestigious awards, such as Best Engineering Team, Best Company for Diversity, Compensation, and Work-Life Balance. At Arista, we take pride in our track record of success and strive to maintain the highest standards of quality and performance in everything we do. Job Description Who You’ll Work With You will collaborate with a broad, interdisciplinary team including experts in optical and electrical components, IC packaging, PCB design, thermal and mechanical design, firmware/software, operations, and test engineering, to bring transceivers from concept through high-volume production. What You’ll Do Arista Networks is seeking an exceptional Senior Optical Transceiver Design Engineer to join our fast-paced, innovative environment. This role will focus on the design and development of next-generation optical modules and engines at 1.6Tbps and beyond. You’ll play a key role in expanding Arista's leadership in data center connectivity and enabling differentiation in the networking space. As part of the Hardware Architecture Engineering Division, you will be responsible for defining transceiver module architecture and detailed engineering specifications based on system-level requirements. • Define and architect optical transceiver modules (1.6T and beyond) aligned with product-level requirements., • Design high-speed PCB schematics including power, control, and signal interfaces for optical modules., • Guide layout engineers to complete PCB layout that meets mechanical, signal integrity, thermal, and manufacturing constraints., • Collaborate across disciplines to ensure successful integration of optical, electrical, and mechanical systems., • Lead technical validation, bring-up, and performance optimization of optical transceivers., • Support design validation, qualification, and root-cause analysis during development and production ramp., • Stay current with and implement relevant industry standards (IEEE, MSA, CMIS, etc.)., • Contribute to automation of transceiver performance testing using Python, C++, or LabVIEW.Qualifications, • B.Tech (or equivalent) in Electrical Engineering or related field., • 10+ years of experience in optical transceiver design, fiber optics, RF modulation, and networking systems., • Hands-on experience with:, • PCB schematic design and layout review for optical modules., • High-speed opto-electrical system design, including DSPs, power rails, and microcontroller interfaces., • MSA and IEEE standards for optical transceivers (e.g., QSFP, OSFP, CMIS)., • Testing transceiver performance: TDECQ, receiver sensitivity, stressed eye measurements., • DSP configuration and FIR equalization optimization for PAM4/NRZ signaling., • Software scripting skills for automation using Python, C++, or LabVIEW., • M.S. or Ph.D. in Electrical Engineering or related field., • Expertise in:, • Optical transmission systems (TOSA/ROSA, Mach-Zehnder modulators, etc.)., • Optical and electrical link analysis and impairment budgeting (OSNR, loss, etc.)., • IC package design and analysis., • High-speed SerDes design (analog/DSP architectures)., • RF front-end components (Drivers, TIAs, LAs)., • Signal and power integrity analysis (HFSS, ADS, SI/PI tools)., • Familiarity with coherent and direct-detect optical systems and DSP algorithms (e.g., clock recovery, polarization de-mux)., • System-level understanding of current and emerging optical transceiver architectures and standards., • Strong problem-solving skills and collaborative, proactive attitude. The new hire base pay for this role has a salary range of $140,000 to $198,000. Arista offers different pay ranges based on work location, so that we can offer consistent and competitive pay appropriate to the market. The actual base pay offered will be based on a wide range of factors, including skills, qualifications, relevant experience, and work location. The pay range provided reflects base pay only and in addition certain roles may also be eligible for discretionary Arista bonuses and equity. Employees in Sales roles are eligible to participate in Arista’s Sales Incentive Plan, which pays commissions calculated as a percentage of eligible sales. US-based employees are also entitled to benefits including medical, dental, vision, wellbeing, tax savings and income protection. The recruiting team can share more details during the hiring process specific to the role and location. #LI-GR1 Additional Information Arista Networks is an equal opportunity employer. Arista makes all hiring and employment-related decisions in a non-discriminatory manner without regard to race, color, religion, sex, sexual orientation, gender identity, national origin or any other factor determined to be unlawful under applicable federal, state, or law law. All your information will be kept confidential according to EEO guidelines.

Job DescriptionCompany Description Axiado is an AI-enhanced security processor company redefining the control and management of every digital system. The company was founded in 2017, and currently has 100+ employees. At Axiado, developing great technology takes more than talent: it takes amazing people who understand collaboration, respect each other, and go the extra mile to achieve exceptional results. It takes people who have the passion and desire to disrupt the status quo, deliver innovation, and change the world. If you have this type of passion, we invite you to apply for this job. Job Description We are seeking an experienced Platform Integration Engineer with expertise in Baseboard Management Controller (BMC) integration and server platform hardware interfaces to support and integrate BMC solutions on customer platforms. This role will involve working closely with customer engineering teams to customize and validate BMC functionalities, with a focus on I2C, eSPI, and GPIO protocols. You will play a crucial role in interpreting customer requirements from engineering documents, performing schematic reviews, and ensuring seamless integration on their server platforms. Key Responsibilities * Work directly with customer engineering teams to understand platform requirements and integrate BMC firmware with customer-specific server hardware. * Customize and optimize BMC configurations to support customer requirements, including monitoring, diagnostics, and hardware control via I2C, eSPI, and GPIO interfaces. * Develop and validate firmware that supports management protocols like IPMI and Redfish for effective remote management tailored to customer platforms. * Review customer-provided hardware schematics to identify integration points, signal routing, and BMC-related components. * Analyze server engineering documents to interpret customer-specific requirements and translate them into BMC configurations and implementations. * Identify and resolve any discrepancies between BMC firmware and customer hardware specifications, collaborating with customer engineering teams for alignment. * Use I2C, eSPI, LTPI, and GPIO interfaces to gather data from sensors, control server hardware, and respond to hardware events. * Collaborate with both internal teams and customer engineering teams to ensure cohesive BMC integration that meets customer expectations and specifications. Qualifications * Educational Background: BS in Electrical Engineering, Computer Engineering, Computer Science, or a related field. Advanced degree preferred. * Experience: 10+ years in platform integration, embedded systems, or hardware engineering with hands-on experience in BMC and server hardware integration. * Technical Skills: * BMC Firmware: Strong knowledge of BMC firmware architecture, including protocols such as IPMI and Redfish for remote server management. * Communication Protocols: Proficiency with I2C, eSPI, and GPIO interfaces for hardware control, monitoring, and communication. * Hardware Diagnostics: Familiarity with hardware diagnostic tools, such as oscilloscopes, logic analyzers, and bus analyzers. * Experience with C/C++ for firmware-level programming is a plus. * Proficient in root-cause analysis and troubleshooting issues with hardware interfaces (I2C, eSPI, GPIO) and BMC functions. * Strong customer-facing skills, with the ability to interpret requirements, troubleshoot, and communicate technical details effectively. Additional Information Axiado is committed to attracting, developing, and retaining the highest caliber talent in a diverse and multifaceted environment. We are headquartered in the heart of Silicon Valley, with access to the world's leading research, technology and talent. We are building an exceptional team to secure every node on the internet. For us, solving real-world problems takes precedence over purely theoretical problems. As a result, we prefer individuals with persistence, intelligence and high curiosity over pedigree alone. Working hard and smart, continuous learning and mutual support are all part of who we are. Axiado is an Equal Opportunity Employer. Axiado does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

Job Description Etched was founded on the belief that new hardware will be needed to run human- and superhuman-level artificial intelligence. Our ASIC systems deliver orders of magnitude higher performance than conventional AI chips. Etched is actively developing Sohu, an ASIC exclusively for transformers, which will enable products that would be impossible with GPUs, like real-time video generation models and extremely deep chain-of-thought reasoning. And we're bringing this technology to market in months, not years. Sohu is hard-coded for individual model architectures and only supports transformers, but has an order of magnitude more throughput and lower latency than a B200. WHAT YOU'LL DO • Co-Develop cutting-edge software optimized across hardware and software driving the full potential of very large transformer models., • Solve challenging problems across the full stack, from low-level drivers and APIs to high-level applications and frameworks., • Bachelor's degree or equivalent practical experience., • 3 years of experience in software development, and with data structures/algorithms., • 3 years of experience developing and testing software on launching products., • 3 years of experience with firmware design, implementation, and troubleshooting., • Master's degree Computer Science, or a related technical field., • Experience resolving customer-related issues., • Experience solving ambiguous problems., • Be part of a dynamic startup that's changing the landscape of AI., • Work on the most advanced AI hardware in the world., • Enjoy a competitive salary and benefits package. To Apply: Please visit our website at etched.ai/careers to submit your resume and cover letter. Location: Cupertino, California

Job Description Please Note: To provide the best candidate experience amidst our high application volumes, each candidate is limited to 10 applications across all open jobs within a 6-month period. Advancing the World's Technology Together Our technology solutions power the tools you use every day--including smartphones, electric vehicles, hyperscale data centers, IoT devices, and so much more. Here, you'll have an opportunity to be part of a global leader whose innovative designs are pushing the boundaries of what's possible and powering the future. We believe innovation and growth are driven by an inclusive culture and a diverse workforce. We're dedicated to empowering people to be their true selves. Together, we're building a better tomorrow for our employees, customers, partners, and communities. The Technology Enabling Development Lab (TED) Our core development focus is the host interface firmware layer that sits in the intersection of system software and flash management firmware. This key host interface firmware technology drives Samsung's breakthrough V-NAND technology and enables our customers to power performance-oriented, demanding, enterprise-class applications ranging from hyper-scale data centers, to big data processing, to software defined virtualized storage arrays and infrastructures. Location: Daily onsite presence at our San Jose, CA office / U.S. headquarters in alignment with our Flexible Work policy. What You'll Do • Design and development of high performance firmware and software for cutting-edge enterprise SSD products., • Debug, optimize, and validate SSD firmware on complex embedded multi-core architectures., • Support customer qualification and adoption of SSD products., • BS in Computer/Electrical Engineering or Computer Science with 5+ years of working experiences in silicon development or MS in Computer/Electrical Engineering or Computer Science with 3+ years of relevant working experience or PhD and 0+ years of relevant experience in storage firmware development is required., • Strong programming experience and demonstrated proficiency in C/C++ for embedded systems, including development of algorithms, manipulation of complex data structures, and implementing highly optimized code, is required., • Relevant hands on experience in embedded software or firmware development, including storage devices or other embedded platforms is required., • Experience with one or more of the following storage related technologies: NVM Express, PCI Express, SAS, SCSI, NAND Flash/FTL, Fibre Channel, SATA, eMMC, or UFS is beneficial., • Experience with ARM or equivalent embedded multi-core microprocessor architectures is required., • Hands on experience with JTAG/ICE debuggers and protocol analyzers is required., • Some scripting experience in one of Python/Perl/Javascript is desired., • Familiarity and experience with modern agile software development methodologies and practices is preferred., • Resourceful Achiever: self-driven and proactive, you apply logic and reason to effectively solve problems and manage risks., • Avid Learner: you eagerly take on new challenges and seek out opportunities to grow and stretch, • Passionate Owner: you are energized by your work, taking ownership and delivering results with integrity., • Committed Collaborator: with a positive attitude and commitment to get to the best result, you welcome ideas from others and drive processes forward in an inclusive manner #LI-VL1 What We Offer The pay range below is for all roles at this level across all US locations and functions. Individual pay rates depend on a number of factors—including the role's function and location, as well as the individual's knowledge, skills, experience, education, and training. We also offer incentive opportunities that reward employees based on individual and company performance. This is in addition to our diverse package of benefits centered around the wellbeing of our employees and their loved ones. In addition to the usual Medical/Dental/Vision/401k, our inclusive rewards plan empowers our people to care for their whole selves. An investment in your future is an investment in ours. Give Back With a charitable giving match and frequent opportunities to get involved, we take an active role in supporting the community. Enjoy Time Away You'll start with 4+ weeks of paid time off a year, plus holidays and sick leave, to rest and recharge. Care for Family Whatever family means to you, we want to support you along the way—including a stipend for fertility care or adoption, medical travel support, and an errand service. Prioritize Emotional Wellness With on-demand apps and paid therapy sessions, you'll have support no matter where you are. Stay Fit Eating well and being active are important parts of a healthy life. Our onsite Café and gym, plus virtual classes, make it easier. Embrace Flexibility Benefits are best when you have the space to use them. That's why we facilitate a flexible environment so you can find the right balance for you. Base Pay Range$134,400—$201,600 USD Equal Opportunity Employment Policy Samsung Semiconductor takes pride in being an equal opportunity workplace dedicated to fostering an environment where all individuals feel valued and empowered to excel, regardless of race, religion, color, age, disability, sex, gender identity, sexual orientation, ancestry, genetic information, marital status, national origin, political affiliation, or veteran status. When selecting team members, we prioritize talent and qualities such as humility, kindness, and dedication. We extend comprehensive accommodations throughout our recruiting processes for candidates with disabilities, long-term conditions, neurodivergent individuals, or those requiring pregnancy-related support. All candidates scheduled for an interview will receive guidance on requesting accommodations. Recruiting Agency Policy We do not accept unsolicited resumes. Only authorized recruitment agencies that have a current and valid agreement with Samsung Semiconductor, Inc. are permitted to submit resumes for any job openings. Applicant Privacy Policy

Job DescriptionDescriptionPrecision Neuroscience is pioneering a brain implant, known as a brain-computer interface (BCI), to restore communication and independence for people with neurological conditions. Our cutting-edge technology is designed to empower people with paralysis to control digital devices—such as computers and smartphones—with their thoughts alone, opening new possibilities for daily life. Precision’s multidisciplinary team brings together leading experts in diverse fields such as neurosurgery, artificial intelligence, machine learning, microfabrication, electrical engineering, and more. We are committed to turning breakthrough scientific advancements into real-world solutions for people affected by conditions such as spinal cord injury, stroke, and ALS. We are seeking a Staff Software Engineer - Cloud to join our mission of advancing brain-computer interface technology. As a key member of our team, you will play a crucial role in developing the software systems that enable our revolutionary BCI platform to transform patients' lives. You'll work on complex technical challenges at the intersection of neuroscience and computing that help patients regain their independence. This position is on-site at least 3 days a week at our Santa Clara, Chicago, Indianapolis or New York offices. We are unable to consider people not currently based in the United States and who do not have working rights. Key Responsibilities • Cloud Architecture and Development: Design, implement, and verify scalable cloud systems that are safe, effective, and secure. Create robust architectures that can handle system-critical operations while meeting strict safety and regulatory requirements. Deliver solutions that balance technical excellence with pragmatic timelines and budgets. Collaborate with the Infrastructure team to leverage appropriate cloud service products. Design and implement REST APIs and necessary backend services to support clinical and consumer application needs., • Cross-functional Leadership: Collaborate in agile settings with diverse teams including Product, Firmware, and Machine Learning. Drive technical discussions, mentor junior engineers, and help establish engineering best practices. Present complex technical concepts to both technical and non-technical stakeholders., • Quality and Documentation: Lead technical design reviews and conduct thorough code reviews to ensure high quality standards. Create comprehensive technical documentation including architecture specifications, API documentation, and user guides. Develop and maintain automated testing frameworks., • Project Management and Communication: Report regularly to the broader team on project progress, identifying risks early and proposing mitigation strategies. Drive technical decision-making while clearly communicating trade-offs and recommendations. Contribute to regulatory documentation and submissions., • Innovation and Research: Thrive in an environment where you'll be breaking new ground in BCI development. Create novel solutions that span multiple disciplines, from real-time neural signal processing to advanced machine learning implementations., • Team Collaboration: Participate in regular in-person team meetings and potentially travel to clinical sites to better understand user needs and system performance. Build strong relationships with team members across all disciplines. Skills, Knowledge and Expertise Required: • Bachelor's degree or above in Computer Science, Computer Engineering, or related field, • 6+ years' experience in software engineering roles, with emphasis on backend development of distributed systems, • Strong programming expertise in Python, with demonstrated ability to write efficient, maintainable code, • Web services and API design expertise, • Experience effectively leveraging cloud services, especially AWS products like RDS, Lamba, ECS/EKS, • Experience implementing proper security measures and testing infrastructure to ensure a safe, scalable, and reliable cloud environment, • Experience with continuous integration/deployment pipelines, • Excellent problem-solving skills and ability to work in a fast-paced environment, • Strong communication and collaboration, especially when dealing with complexity or ambiguity, both within Software and cross-functionally Preferred: • Experience with healthcare data architecture and database implementation, including HIPAA and regulatory considerations, • Experience with FDA documentation requirements, • Experience integrating with third party tools (content management, notifications, enterprise software, etc)

Job Description About Ceribell Ceribell is a medical technology company focused on transforming the diagnosis and management of patients with serious neurological conditions. The Ceribell System is a novel, point-of-care electroencephalography ("EEG") platform specifically designed to address the unmet needs of patients in the acute care setting, and is being used in hundreds of community hospitals, large academic facilities and major IDN's across the country. Our entire team is driven by a shared commitment to transforming the landscape of critical care through our rapid seizure detection technology, come join the movement! Position Description Ceribell is looking for a Senior Firmware Engineer / Senior Embedded Engineer who is passionate about biomedical applications and who has experience in the development of embedded or IoT products. The successful candidate will join the R&D team and will play a key role in the development of the next generation of Ceribell's life saving technologies. Our firmware development stack is based around a STMicroelectronics STM32 ARM Cortex microcontroller and we use FreeRTOS, the IAR Embedded Workbench, and the TouchGFX framework. You must be able to work collaboratively as part of a cross-functional R&D team, but you must also be able to take individual ownership for development, testing, and documentation of your projects. What you'll achieve • Develop and test firmware features for Ceribell's EEG systems, • Understand user needs and translate them to the development of new and improved features, • Contribute to GUI development using frameworks such as Qt, TouchGFX, LVGL, or custom OpenGL-based stacks, • Participate in code reviews, peer reviews, and risk management activities, • Create and revise technical documentation, • Provide input on firmware and hardware architecture for new and existing productsWhat you'll need to be successful, • Bachelor's Degree in electrical engineering, computer science, biomedical engineering or, • related field. Graduate degree preferred, • 5+ years of experience in firmware development of a commercial product, • Proficient in C/C++ and experienced with firmware development on ARM based systems, • Hands-on experience developing GUIs for embedded devices using Qt, TouchGFX, LVGL, or other embedded graphics frameworks, • Direct experience with development of WiFi connected / IoT devices preferred, • Strong analytical skills, detail-oriented and collaborative In addition to your base compensation, Ceribell offers the following: • Annual Bonus + Equity Opportunity, • 100% Employer paid Health Benefits for Employees, • 50% - 70% Employer paid Health, Dental & Vision for dependents (depending on plan selection), • 100% paid Life and Long-Term Disability Insurance, • 401(k) with a generous company match, • Employee Stock Purchase Plan (ESPP) with a discount, • Monthly cell phone stipend, • Flexible paid time off, • 11 Paid Holidays + 5 Company Wellness Days, • Excellent parental leave policy, • Fantastic culture with tremendous career advancement opportunities, • Joining a mission-minded organization!Compensation Range$130,000—$165,000 USD

Job DescriptionSalary: $60,000 - $90,000 Description TrueNAS is redefining enterprise storage by delivering proven data resilience, performance, and flexibility without the complexity or constraints of legacy solutions. As the most deployed storage platform in the world, TrueNAS already powers critical data storage infrastructure for businesses, research institutions, and government agencies across 200+ countries and millions of users. Our mission is simple: to become the most trusted name in data storage. Originally founded in Silicon Valley in 2002 under the name iXsystems, TrueNAS is a profitable, independent company with a culture rooted in trust, curiosity, technical excellence, and continuous improvement. Whether you work remotely or on-site, youll be part of a team that values collaboration and meaningful impact - where people come before profit, and bold ideas drive the future of data infrastructure. If youre ready to help shape the future of enterprise storage, wed love to connect. Position Overview:As a member of the Support Team, the Tier 2 Hardware Support Engineer will support the deployment and troubleshooting of custom server solutions for customers. Ability to provide technical expertise to the Support Team for issues raised in the field is required, including occasional on-site and internal bench work to debug complex customer issues. The debugging work will include complex hardware issues, firmware, and OS interoperability exceptions. Strong customer focus is also a must along with demonstrable troubleshooting and configuration competency in a wide variety of categories. This is an onsite role in our Campell, CA office. Base Pay Range The base pay range of this position is $60,000 to $90,000 USD annually. Please note that the provided range reflects the pay spectrum for positions within the same job category as the one to which this position belongs. The final offer will consider various factors, such as location, education, and prior experience, to ensure a comprehensive and fair compensation assessment. TrueNAS offers a comprehensive package of benefits including health, dental, vision, disability, and life insurance, paid time-off, 401(k), health and flexible spending accounts, stock purchase plan and more. Expected Posting Timelines This position will be open for a minimum of 5 days, a maximum of 90 days. The Day-to-Day The essential functions and responsibilities for this position include, but are not limited to, the following. Other duties may be assigned as needed. • Work in coordination with customers to identify any hardware-related issues., • Support Linux-based, high-performance computing (HPC) and Storage Solutions featuring a wide range of technologies., • Render professional, timely, and expert user support., • Troubleshoot software and hardware issues., • Prioritize duties in consultation with customers., • Direct the RMA process and coordinate support escalations for iXsystems and third-party hardware and software., • Fully document processes, procedures, and all work performed., • Mentor, task, and monitor junior team members., • Participate in growing iXsystems technical capabilities through knowledge-sharing and team activities., • Investigate and solve technical issues encompassing Enterprise Data Center Hardware, Software, and storage technologies., • Diagnose the root cause of high-level system failures - includes identifying failing components and source(s) of failure. Education and Experience We have identified the following programs, experience, and knowledge that have helped others find success in this role at iXSystems. We understand though that knowledge comes from many forms of learning and experiences. Above all, we consider a persons potential impact in the role and value their unique path to this point in their career. • Bachelors Degree in Computer Science, Computer/Electrical Engineering, or a related field (or equivalent experience), • 7+ years of hands-on experience with UNIX/Linux server environments, • Strong Linux systems administration skills and experience with open source technologies, • Understanding of network technologies, architectures, and protocols, • Practical knowledge of software-defined storage architecture and administration, • Practical knowledge of implementation and administration of High-Performance, • Computing (HPC) technologies, including cluster resource management, job scheduling, etc., • A combination of professional or educational experience (whether formal or informal) that affords you with the knowledge, skills, and abilities above Experience, knowledge, and demonstrated skills in the following: • Linux System Administration skills, including; vi editor, interpreting /var/log files (Application, Event, Service, and System Logs), and taking appropriate action to ensure reliable operation (interactions between OS layer and hardware layer), • BIOS and IPMI/BMC firmware installation along with advanced troubleshooting and configuration, • Interconnection technologies/protocols such as PCI Express, NVMe, and USB, • Storage device connection technologies such as SATA, SAS, NVMe, • Storage RAID levels, advantages and disadvantages of each level, understanding of which RAID level is best practice for various use cases such as backup, performance, boot devices, etc., • Network technologies, strong understanding of Ethernet and TCP/IP, switching/routing, ability to work at all levels of the OSI model, strong knowledge of network aggregation and virtualization, LAGG, LACP, VIP, VLAN, • Storage filesystems, ZFS, GlusterFS, • Storage transport and network file system protocols, SMB, iSCSI, NFS, • Virtualization and hypervisors such as VMware vSphere / ESXi, Hyper-V, Xen / Citrix XenServer, Red Hat Enterprise Virtualization (RHEV), KVM, • Remote monitoring and management of host system technologies (mainly BMC/IPMI similar to HP iLO or Dell DRAC) and command-line utilities such as ipmitool, interpreting logs such as system event log and recommending/taking appropriate action, • Integrating commercially-available computer components into server systems from SuperMicro, ASUS, ASRock, Gigabyte, Dell, and others, • Hands on experience with systems assembly, installing motherboards and add on cards, NICs and transceivers, HBAs/expanders, HDDs, SSDs, wiring/cabling, server microprocessors, AMD (EPYC) and Intel (Xeon), • Diagnose the root cause of high level system failures - includes identifying failing components and source(s) of failure, • Research server and storage documents, determine Linux version interoperability, • Write/modify shell scripts as needed to run tests and benchmarks, automation of tasks is a plus, • Remote login and command-line execution, file transfer, SSH, FTP, • Benchmarking methods, test diagnostics and stress testing of computer hardware (CPU, memory, networking, storage), • Strong written and verbal communication skills, demonstrated ability to support customers (internal and/or external), • Red Hat Certified Systems Administrator (RHCSA), SUSE Certified Administrator (SCA), or equivalent, • VMware vSphere / ESXi Certification - VMware Certified Professional or equivalent, • Strong knowledge of High-Performance Computing (HPC), • Deep knowledge of Storage Solutions, • Deep knowledge of Networking both hardware and software, • Familiarity with accelerated computing technologies (e.g., GPUs) Equal Employment Opportunity: iXsystems DBA TrueNAS, Inc provides equal employment opportunities to all employees and applicants in all company facilities without regard to race, color, religious creed, sex, national origin, ancestry, citizenship status, pregnancy, childbirth, physical disability, mental and intellectual disability, age, military status or status as a Vietnam-era or special disabled veteran, marital status, registered domestic partner or civil union status, gender (including sex stereotyping and gender identity or expression), medical condition (including, but not limited to, cancer-related or HIV/AIDS-related), genetic information, or sexual orientation in accordance with applicable federal, state and local laws. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

We are seeking a highly skilled Security Software Engineer with expertise in Trusted Platform Modules (TPM), Firmware Attestation, and Root of Trust (RoT). The ideal candidate will have hands-on experience with TPM firmware and protocols and will be responsible for designing, implementing, and maint

Co-develop with a world-class team of hardware and software engineers to push the boundaries of AI technology. Review code developed by other engineers and provide feedback to ensure best practices (e. Masters degree or PhD in Engineering, Computer Science, or a related technical field.