Hvac management jobs in Rochester, New YorkCreate job alerts

Compensation Type: Hourly Highgate Hotels: Highgate is a leading real estate investment and hospitality management company with over $15 billion of assets under management and a global portfolio of more than 400 hotels spanning North America, Europe, the Caribbean, and Latin America. With a 30-year track record as an innovator in the hospitality industry, this forward-thinking company provides expert guidance through all stages of the property cycle, from planning and development through recapitalization or disposition. Highgate continues to demonstrate success in developing a diverse portfolio of bespoke lifestyle hotel brands, legacy brands, and independent hotels and resorts, featuring contemporary programming and digital acumen. The company utilizes industry-leading revenue management tools that efficiently identify and predict evolving market dynamics to drive outperformance and maximize asset value. With an executive team of seasoned hospitality leaders and corporate offices worldwide, Highgate is a trusted partner for top ownership groups and major hotel brands. _ Location: Homewood Suites Rochester 2095 Hylan Dr.Rochester, NY 14623 Responsibilities: • Assist with the operation maintenance and repair of equipment., • Change out light bulbs; perform preventative maintenance for guest rooms to include: vinyl repair touch up paint minor furniture repair tub caulking tile repairs etc., • Perform preventative maintenance for ice machines refrigerators kitchen equipment laundry equipment HVAC guestrooms meeting rooms the swimming pool and hot tub., • Perform plumbing repair laundry equipment repair preventative maintenance on all exhaust fans and supply; monitor energy conservation; repair vacuum cleaners and any other small equipment upon request., • Immediately follow up on any alarms to determine the exact location and cause - determine emergency status and report to the Front Desk with findings., • Perform other tasks/jobs as assigned by the supervisor or manager., • Weekend Availability required. Qualifications:, • Experience in a hotel or a related field preferred., • High School diploma or equivalent required., • Licensed in a trade preferred (plumbing electrical HVAC carpentry etc.)., • Must have a valid driver’s license for the applicable state., • Must have an acceptable MVR (Motor Vehicle Driving Record) property specific. Benefits • In addition to travel discounts at our hotels, Highgate offers competitive benefits, including three pricing tiers of medical coverage, as well as Dental and Vision benefits to eligible full-time associates. Paid time off plans may also be available to associates who qualify. The Retirement 401(k) Program is open to both full-time and part-time associates who qualify.

Job Description Maintenance Supervisor Department: Maintenance Reports To: Plant Manager / Maintenance Manager Location: Rochester, NY Employment Type: Full-Time Position Summary The Maintenance Supervisor is responsible for leading and coordinating all maintenance activities within a manufacturing facility specializing in sheet metal fabrication and welding operations. This role ensures maximum equipment uptime, safe working conditions, and efficient maintenance operations while supervising maintenance technicians and supporting continuous improvement initiatives. The position requires strong leadership skills combined with hands-on technical expertise in industrial machinery, welding systems, and fabrication equipment. Key Responsibilities 1. Leadership & Supervision • Supervise, schedule, and direct daily activities of maintenance technicians and mechanics., • Assign preventive and corrective maintenance tasks based on production priorities., • Provide coaching, training, and performance evaluations., • Maintain staffing schedules, including overtime and shift coverage as needed., • Promote teamwork and accountability within the maintenance department. 1. Preventive & Corrective Maintenance • Develop, implement, and monitor preventive maintenance (PM) programs., • Ensure timely response to equipment breakdowns to minimize downtime., • Maintain detailed maintenance records using CMMS systems., • Analyze recurring equipment failures and implement long-term corrective actions. 1. Equipment & Technical Oversight Oversee maintenance and repair of: • Sheet metal fabrication equipment (press brakes, shears, CNC punch presses, laser cutters), • Welding equipment (MIG, TIG, robotic welding systems), • Mechanical systems (motors, gearboxes, conveyors, bearings), • Electrical systems (PLC controls, sensors, drives), • Hydraulics and pneumatics systems, • Facility systems (HVAC, compressed air, building infrastructure) Troubleshoot complex mechanical and electrical issues as needed. 1. Safety & Compliance • Enforce OSHA and company safety standards., • Ensure compliance with lockout/tagout (LOTO) procedures., • Conduct safety audits and toolbox talks., • Investigate incidents and implement corrective actions., • Maintain compliance with local, state, and federal regulations. 1. Budgeting & Inventory Control • Manage maintenance department budget., • Monitor parts inventory and order supplies as needed., • Negotiate with vendors and contractors., • Control maintenance costs while maintaining operational reliability. 1. Continuous Improvement • Support Lean Manufacturing and continuous improvement initiatives., • Track KPIs such as downtime, MTBF (Mean Time Between Failures), and maintenance costs., • Identify process improvements to increase equipment efficiency and reliability., • Collaborate with engineering and production teams on equipment upgrades. Qualifications Education • High School Diploma or GED required., • Associate’s Degree or Technical Certification in Industrial Maintenance, Mechanical Technology, or related field preferred. Experience • 5–10 years of industrial maintenance experience in manufacturing., • 2+ years of supervisory or lead experience preferred., • Experience in sheet metal fabrication and welding environments strongly preferred. Technical Skills • Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems., • Experience with PLC troubleshooting., • Familiarity with CMMS software., • Ability to read blueprints, electrical schematics, and technical manuals. Competencies • Leadership and team development, • Problem-solving and root cause analysis, • Time management and prioritization, • Communication and cross-functional coordination, • Decision-making under pressure Physical Requirements • Ability to stand, walk, and lift up to 50 lbs., • Comfortable working in industrial manufacturing environments., • Willingness to work off-shift or on-call as needed. Monday thru Thursday 6:00 am - 3:30 pm Friday 6:00 am - 11:00 am

Job Description Job Summary: We are seeking an experienced and innovative Sr Mechanical Engineer to join our team. This role will lead the design, development, testing, and continuous improvement of commercial HVAC products and systems. The ideal candidate has strong experience in industrial ventilation, process cooling/heating, and contamination control, with a focus on reliability, efficiency, and safety in manufacturing operations. Qualifications: • Bachelor’s degree in Mechanical Engineering., • 5+ years of HVAC engineering experience, with a strong focus on manufacturing or industrial environments., • In-depth knowledge of large-scale commercial or industrial HVAC systems is preferred. Skills & Competencies: • Strong analytical and problem-solving abilities in complex industrial systems., • Excellent project management and organizational skills., • Ability to work cross-functionally with operations and engineering teams., • Strong communication skills, both technical and non-technical., • Focus on safety, compliance, and continuous improvement.

Job DescriptionPosition Summary We are seeking a detail-oriented and proactive Purchasing Specialist to support our procurement and inventory operations. This role plays a critical part in managing vendor relationships, optimizing inventory, and supporting cross-functional teams to ensure efficient purchasing processes and overall operational success.Key Responsibilities Procurement & Purchasing Operations • Procure materials and services in a cost-effective and timely manner, aligned with inventory control guidelines, • Obtain and evaluate vendor quotations to support purchasing decisions, • Manage and expedite purchase orders to ensure on-time delivery, • Investigate and resolve discrepancies related to pricing, quantities, and vendor performance, • Ensure all purchasing documentation is accurate and compliant with company policies and terms, • Process invoices, including direct shipment transactions, ensuring accuracy and timely completionBuy Line Management, • Serve as a Product Champion, developing a strong understanding of assigned product lines and purchasing rationale, • Maintain and optimize min/max levels and stock vs. non-stock designations, • Identify and evaluate buying group opportunities to reduce costs and improve margins, • Manage dead stock, collaborating with vendors and sales teams to improve inventory turnover, • Ensure vendors meet full freight allowance requirements where applicable, • Communicate pricing changes to the internal Pricing Team in a timely mannerInventory & Logistics Coordination, • Perform ongoing inventory analysis of raw materials and finished goods to optimize stock levels, • Coordinate freight claims upon shipment receipt, including verification of quantities and product quality with internal teamsCross-Functional Collaboration, • Collaborate closely with Outside Sales, Senior Management, Warehouse, Marketing, and Purchasing teams, • Communicate proactively regarding extended lead times, supply issues, inbound bulk purchases, and other key updates impacting operationsVendor Management & Relationships, • Build and maintain strong, productive relationships with vendors and manufacturer representatives, • Identify and share relevant vendor training opportunities with the Senior Management TeamQualifications Required: • 3+ years of experience in purchasing, procurement, or buying, • Strong proficiency in Microsoft Excel (Microsoft 365)Preferred:, • Bachelor’s degree in Business, Supply Chain, Management, or related field, • Experience in an HVAC or manufacturing environment, • Familiarity with ERP systemsKey Skills, • Strong analytical and problem-solving abilities, • Excellent attention to detail and organizational skills, • Effective communication and negotiation skills, • Ability to manage multiple priorities in a fast-paced environment, • Collaborative mindset with cross-functional teams Powered by JazzHR PUSf1qlT9e

Job DescriptionResidential Lead HVAC Installer10K SIGN-ON BONUSCompensation and Benefits Pay and Bonuses Annual Salary Range: $73,152 – $138,210 (based on experience and performance, inclusive of bonuses) Monthly Performance Bonuses: $500 – $4,000 per month Overtime opportunities available Paid drive time Benefits Medical benefits starting the 1st of the month after hire 401(k) with company match Paid vacation and holidays Company vehicle (wrapped), gas card, iPhone, and tablet provided Paid travel time Uniforms provided Paid training and continuing education Career growth opportunities through structured advancement programs Fun events: summer picnic, holiday party, Penn State football game tickets, paintball, flag football Key Responsibilities Install residential HVAC systems, including split systems, package units, mini-splits, boilers, and water heaters Lead and oversee a crew of two to three installers on residential job sites Communicate professionally with customers to ensure a five-star experience Maintain timely and consistent communication with the Installation Manager Assist with training and mentoring installation team members Perform other duties as assigned by management Requirements Experience and Skills Proven HVAC installation and service experience Experience performing load calculations preferred Strong technical knowledge of HVAC system design, installation, and service (including mini-splits and boilers) Excellent attention to detail and organizational skills Strong leadership and crew management abilities Computer proficiency and familiarity with ServiceTitan, Google Workspace, and Microsoft Office Understanding of job costing and company financials preferred Excellent communication and interpersonal skills Ability to analyze information and make informed decisions quickly Physical Demands Regularly required to sit, stand, walk, stoop, kneel, and use hands and arms Frequently required to reach, lift, and carry up to 100 pounds Requires clear vision and the ability to adjust focus for detailed work Work Environment Fast-paced and dynamic environment Moderate noise level with frequent interruptions and shifting priorities Requires effective and professional communication with customers, vendors, and team members Must maintain professionalism and composure under pressure #ZR

Job Description Konar Properties is a family-owned real-estate development company. We develop, own, and manage commercial properties and multi-family communities in Rochester and Western NY. Konar Properties is an equal opportunity employer (EOE) and is committed to diversity in all areas of the organization. FT highly skilled Maintenance Technicians in Residential Property Management needed at Elmwood Manor Apartments and Townhomes in Brighton NY. "Sign-on Bonus" and excellent benefits! Candidates must have a valid driver's license. A min. 3 years' experience in the apartment maintenance or similar trade, plus experience in apartment turnovers required. Maintenance Technician skills required: carpentry, HVAC, electrical, plumbing, painting, drywall. High School Diploma or greater required. • Comprehensive health insurance with 65% premium covered by employer, • 401K retirement benefits with employer match, • Profit sharing bonus paid semi-annually, • Vacation and sick paid time off, • Employer paid STD/LTD, • Employer-paid life insurance, • Holiday pay including paid birthday holiday, • Annual company celebrations/events Company DescriptionKonar Properties is a family-owned real-estate development company. We develop, own, and manage commercial properties and multi-family communities in Rochester and Western NY. Konar Properties is an equal opportunity employer (EOE) and is committed to diversity in all areas of the organization. Highly Skilled Maintenance Technician in Residential Property Management needed at Elmwood Manor Apartments and Townhomes in Brighton NY.Konar Properties is a family-owned real-estate development company. We develop, own, and manage commercial properties and multi-family communities in Rochester and Western NY.\r\n\r\nKonar Properties is an equal opportunity employer (EOE) and is committed to diversity in all areas of the organization.\r\n\r\nHighly Skilled Maintenance Technician in Residential Property Management needed at Elmwood Manor Apartments and Townhomes in Brighton NY.

Job DescriptionBenefits/Perks • Flexible Schedule, • Competitive Pay, • Career Advancement Job SummaryWe’re looking for a hardworking Maintenance Technician to join our team! You’ll make sure our facilities are operating efficiently, regularly inspect our building for any damage, and conduct routine maintenance on our equipment to keep it running smoothly. The ideal person for this job is a reliable team player and a problem solver who has some prior maintenance experience. If you’re looking for a job at a fast-growing company that really values its employees, reach out to us today! Responsibilities • Conduct routine maintenance on equipment and systems such as HVAC units, plumbing fixtures, and electrical wiring to make sure they’re operating efficiently and make any needed repairs, • Inspect the building for any structural damage to windows, doors, and walls and perform necessary repairs, • Keep a record of completed repairs and when the equipment was last serviced, • Develop and execute preventative maintenance measures to keep our equipment operating efficiently and prevent any safety risks, • Handle additional maintenance tasks as neededQualifications, • High school diploma/GED or equivalent, • At least 2 years of maintenance experience, • Knowledge of heating and air conditioning units, plumbing systems, and electrical systems, • Advanced understanding of maintenance equipment, procedures, and techniques, • Available to be on call and respond to maintenance requests on nights and weekends, • Excellent work ethic, communication skills, time management skills, and attention to detail

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview The C&S Facilities Group is seeking a Senior Mechanical Engineer / Managing Engineer to join our team in our Syracuse or Rochester office. This is a great opportunity for an individual to help grow our facilities practice. This individual will be responsible for leading projects, performing, and managing technical engineering. The Senior Mechanical Engineer will be responsible for delivery of mechanical engineering services in a multitude of markets including healthcare, higher education, government, aviation, food service, hospitality, and industrial projects in the Southeastern United States. Successful candidates should have experience and/or education in mechanical design for buildings and facilities. This position includes an emphasis on HVAC design (Commercial, Food Service, Industrial); previous field experience is a plus. Required Knowledge, Skills & Abilities: • Bachelor's Degree in Mechanical Engineering, • Minimum 10 years of related experience including skills in mechanical design of HVAC systems, • A Professional Engineering license is highly desired, • Project Management experience desired, • Serves as lead mechanical engineer on projects and/or works in the responsible charge of a licensed mechanical engineer, • Performs mechanical engineering calculations, edits specifications, and prepares design drawings, • Ability to perform Cooling/Heating calculations, Ventilation Calculations, ASHRAE 15 verification, • Familiarity with CHW VAV systems, VRF Systems, DOAS Equipment, Energy Recovery Equipment, • Familiarity with building codes and engineering design requirements, • Assists in developing project mechanical requirements, conducting field surveys, and developing construction documents, • Develop HVAC controls schematics, sequences of operation, and points lists, • Experience with renovation projects, • Coordinates with the other design disciplines in the delivery of mechanical designs, • Performs services during construction including responding to RFI's, reviewing submittals, and performing field observations, • Experience with Revit highly desired, • Beneficial prior project experience on healthcare, higher education, government, aviation, food service, hospitality, and/or industrial projects, • Strong communication, organizational, and interpersonal skills, • Self-motivated and works well in team environment, • Occasional travel as a part of project delivery will be required Estimated Compensation Range: $100,000-150,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Senior Construction Superintendent – Healthcare Projects Location: Rochester, NY (100% Onsite) Compensation: $100,000 – $130,000 annually Additional Compensation: • Discretionary annual bonus, • Vehicle allowance, • Phone allowance, • Mileage reimbursement Employment Type: Full-Time Schedule: Monday–Friday | Onsite at project location Travel: No overnight travel required Relocation: Open to candidates within surrounding regions (local preferred) Position Overview Wheeler Staffing Partners is seeking an experienced Senior Construction Superintendent – Healthcare Projects to lead large-scale healthcare construction projects in Rochester, NY. This role is responsible for all on-site construction operations, safety oversight, schedule execution, and coordination of subcontractors and vendors. The ideal candidate has strong experience managing $10M+ commercial healthcare construction projects, is well-versed in pull planning and the Last Planner System, and excels in fast-paced, high-accountability environments. Key Responsibilities • Serve as the primary on-site leader responsible for daily construction operations, • Champion jobsite safety and enforce the Site-Specific Safety Plan, • Lead safety meetings and manage site logistics and jobsite conditions, • Develop, maintain, and update project schedules; ensure schedule integrity, • Lead pull planning sessions and manage Last Planner System execution, • Coordinate subcontractors, vendors, and trade partners to meet project milestones, • Oversee compliance with construction documents, quality standards, and safety requirements, • Manage AHJ, third-party, and client inspections, • Drive coordination between trades to maintain productivity and schedule adherence, • Maintain accurate daily field reports and documentation, • Support procurement and timely delivery of materials, • Review submittals and ensure alignment with project requirements, • Ensure implementation of the Project Quality Assurance Plan, • Monitor project performance and report progress to leadership, • Support energy savings targets in coordination with engineering and M&V teams, • Ensure compliance with all federal, state, and local regulations, • Manage permit documentation and closeout processes, • Support project startup, commissioning, and closeout activities, • Represent company values and professionalism on all job sites Qualifications • Minimum 5+ years of experience managing large ($10M+) healthcare or commercial construction projects, • Bachelor’s degree in Construction Management preferred (or equivalent HVAC/Plumbing experience), • Strong experience with pull planning and the Last Planner System, • Proficiency in Procore, Primavera, and Microsoft Office Suite, • Proven leadership and supervisory experience, • Strong organizational, scheduling, and communication skills, • Ability to manage multiple priorities in a fast-paced environment, • High attention to detail and strong problem-solving skills, • Ability to work through ambiguity and resolve field-level challenges, • Strong commitment to safety, quality, and project outcomes Compensation & Benefits • Competitive salary: $100,000 – $130,000, • Discretionary annual bonus, • Monthly vehicle allowance ($452), • Monthly phone allowance ($80), • Mileage reimbursement, • Medical, dental, and vision insurance, • 401(k) with company match, • 100% match on first 3%, • 50% match on next 2%, • 120 hours of PTO, • 9 paid holidays Why Join Wheeler Staffing Partners? Wheeler Staffing Partners connects top construction professionals with high-impact projects that align with their experience and career goals. We pride ourselves on strong partnerships, long-term career growth, and placing talent where they can make a measurable impact.

Job DescriptionDescription: Are you an experienced Senior Environmental Specialist with expertise in asbestos, lead-based paint, PCB, and mold investigations? This is your opportunity to lead complex environmental projects from hazardous building materials assessments through abatement design and construction administration. You’ll develop detailed abatement plans and technical specifications, support regulatory compliance, review contractor documentation, respond to RFIs, and coordinate directly with clients and agencies—owning projects from investigation through successful project completion. If you’re ready to expand your technical leadership, take on high-impact environmental remediation work, and make a meaningful impact on public health and safety, we encourage you to apply today and take the next step in your environmental career. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do • Plan and implement regulated hazardous building materials surveys for renovation and demolition projects, including asbestos, lead-based paint, PCB-caulk, mold, and other hazardous and universal wastes., • Conduct bulk sampling, homogeneous area assessments, data analysis, quantification, and prepare detailed survey reports and sampling location plans., • Develop project-specific asbestos and hazardous materials abatement plans and associated technical specifications in compliance with OSHA, EPA, AHERA, NESHAP, TSCA, ICR 56, and other applicable federal, state, and local regulations., • Adhere to the project scheduling requirements for schematic design, design development, construction and bid document submittals., • Prepare hazardous waste management plans aligned with federal, state, and local regulations and requirements, including 6 NYCRR Parts 360, 364, and 370–373., • Serve as technical lead for major project phases, applying independent judgment in regulatory interpretation and problem resolution., • Provide construction administration support, including submittal review, request for information responses, contractor coordination, and regulatory agency communication., • Manage project scope, budgets, schedules, and deliverables to ensure quality, compliance, and client satisfaction., • Support proposal development, cost estimating, and business development initiatives., • Mentor and guide junior environmental staff to strengthen technical capability and team growth. Requirements: What You Bring • Bachelor’s degree in Environmental Science, Environmental Engineering, Construction Management, or related field with 5+ years of experience in hazardous building materials, environmental compliance, or asbestos consulting., • Active OSHA 40-Hour HAZWOPER (with a current annual 8-Hour refresher) and valid NYS driver’s license., • NYSDOL-Certified Asbestos Building Inspector and Asbestos Project Designer required., • Additional certifications preferred: USEPA Lead Inspector and Risk Assessor, NYSDOL Article 32 Mold Assessor, Asbestos Project Monitor, and NYSDOH Radioactive Materials License (XRF)., • Experience preparing Hazardous Waste Management Plans and interpreting federal/NYS regulations., • Proficiency with MS Office, AutoCAD, Revit, Survey123, and the ability to read architectural renovation and demolition drawings with knowledge of building systems (HVAC, mechanical, plumbing, electrical, insulation, and building materials)., • Dedicated to fostering trusting relationships through collaboration, integrity and respect., • Deliver high-quality work using critical thinking, sound judgment, and exceptional organizational skills., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Curious and improvement-minded, embracing feedback and continuously seeking better solutions. Salary Range $38.75-$41.25 Hourly Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and leadership of multidisciplinary design teams., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths and leadership opportunities., • You thrive in a culture that keeps work engaging and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a team-driven environment that promotes mentorship and ongoing learning., • Your success is supported by a flexible work environment so you can thrive professionally and personally. What We Offer Your Impact Matters, Your Career Thrives. We offer competitive salaries and benefits, including: Medical, Dental & Vision Insurance • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security, • Engage with a variety of employee groups focused on community, inclusion, and employee voice. Physical Demands & Work Environment The physical demands listed are required to perform the essential functions of this role. Reasonable accommodation may be provided in accordance with applicable law. • Ability to lift up to 25 lbs., traverse uneven terrain, and stand or walk for extended periods., • Ability to travel to and access project and construction sites, including working at heights (ladders, scaffolding, lifts, rooftops) and entering containment areas using proper fall protection and safety procedures., • Ability to follow Job Safety Analyses (JSAs) and Health & Safety Plans, and properly use required PPE, including respirators, Tyvek suits, gloves, hard hats, eye/hearing protection, and steel-toe boots., • Ability to work in office, field, and construction environments with exposure to dust, noise, fumes, temperature extremes, heights, and inclement weather., • Ability to pass annual physicals, including respirator fit and pulmonary testing., • Flexibility to work occasional extended or modified hours as needed. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid #LI-CA1

Job Description Experienced HVAC Service Technician Turnbull Heating & Air I’m looking to add an experienced HVAC Service Technician to our team at Turnbull Heating & Air, a family-owned company serving our community for over 60 years. We’re focused on quality work, long-term relationships, and taking care of our people. If you’re a skilled technician who takes pride in doing things the right way and wants stability with a company that’s been around for decades—and plans to be around for decades more—this may be a good fit. What You’ll Be Doing Diagnose, service, and repair residential and light commercial HVAC systems Communicate clearly and professionally with customers Complete work efficiently and correctly the first time Maintain clean, accurate service documentation Represent the company with professionalism and integrity What I’m Looking For 5+ years of HVAC service experience preferred Strong diagnostic and troubleshooting skills EPA Certification (required) Valid driver’s license and clean driving record Reliable, self-motivated, and accountable Someone who wants to build a long-term career, not just bounce job to job What We Offer Hiring Bonus (details discussed during interview) Competitive pay, based on experience Tuition reimbursement for approved training and continuing education Company vehicle and tools (for qualified technicians) Health benefits and paid time off A stable, family-owned company with 60 years in business Straightforward management and realistic expectations Why Turnbull We’re not a private-equity roll-up. We’re not a churn-and-burn shop. We’re a long-standing local company that values craftsmanship, loyalty, and mutual respect. If you do good work, show up, and take care of customers, you’ll be treated well here. Apply today and let’s have a straightforward conversation.

Job DescriptionHere at GoNetspeed, we believe in the power of connectivity. We believe that life doesn’t wait for us to catch up. We believe that providing the fastest and most reliable Internet to the communities we serve means committing to the present and building for the future. And we believe that our amazing team of employees are the key to our future and vision of connecting communities for today and for whatever comes next. If this excites you, come and join our team. GoNetspeed is looking for a senior network engineer to join our team. This individual should enjoy working multiple projects in a fast paced, team centric environment. Essential Functions:Responsible for the installation, layout, and maintenance of all network gear.Plan, design, analyze, and provide technical support for GoNetspeed's fiber-based network.Conduct research and evaluation of new network technology and recommend purchases of network equipment.Responsible for Windows and Linux based back office systems.Participate in an on-call rotation with other engineers.Assist provisioning and technical support as needed. Required Skills:Successful candidates should possess in-depth working knowledge of Nokia and Cisco network equipment.In-depth knowledge in routing (BGP, OSPF, ISIS), switching, and PON related configurations.Intermediate knowledge in fiber termination specifications.In-depth knowledge of DWDM systems.In-depth knowledge in Unix based scripting and systems management.Excellent project management skills, written skills, and communications skills.Firm understanding of PON networks.Intermediate knowledge of outside plant equipment and terminology.Intermediate knowledge of Carrier Grade NAT.Intermediate knowledge of the building of facilities. Power, space, HVAC, cabling, etc.In-depth knowledge of carrier grade IPAM/DHCP solutions.The ability to learn new technologies quickly.Ability to perform independent system analysis, design, and plan implementation.Attention to detail a must. Education:BS in Information Technology or equivalent education required.5+ years' experience building data networks with at least 2 years in systems engineering. GoNetspeed is an equal opportunity employer and does not discriminate on the basis of age, sex, gender identity, color, race, creed, national origin, religious persuasion, marital status, political belief, or disability. Benefits: 401(k)401(k) matchingDental insuranceEmployee assistance programEmployee discountFlexible spending accountHealth insuranceHealth savings accountLife insurancePaid time offReferral programVision insurance GoNetspeed is an equal opportunity employer and does not discriminate on the basis of age, sex, gender identity, color, race, creed, national origin, religious persuasion, marital status, political belief, or disability. Thank you for choosing GoNetspeed as your potential next employer! We know you have other options when selecting an employer of choice and are so glad you chose to apply with us.

Job DescriptionSummary: We are representing a well-established general contractor seeking an experienced MEP Project Manager to lead the mechanical, electrical, plumbing, and commissioning scopes for a high-profile commercial project. This role is ideal for a seasoned Mechanical or MEP Project Manager with a strong background in complex building systems who can manage the process from installation through startup and turnover. The ideal candidate is highly organized, technically proficient, and comfortable managing MEP coordination while driving communication between field teams, design professionals, commissioning agents, and ownership. Key Responsibilities: MEP & Commissioning Oversight Serve as the primary point of contact for all MEP and commissioning scopes. Coordinate with commissioning agents to track system readiness, startup, and punch list closure. Conduct QA/QC spot checks on rough-ins and periodic system installations to ensure quality compliance. Lead planning meetings with trade partners to maintain milestone progress and ensure sequencing efficiency. Collaborate with design and field teams to resolve technical issues and design gaps. Manage all MEP-related RFIs, submittals, and documentation for startup and closeout. Project Management Oversee schedule, budget, and subcontractor performance for assigned scopes. Manage buyout, change orders, and project billing while ensuring accurate forecasting. Conduct jobsite walks and enforce safety compliance in coordination with the project team. Lead progress meetings with owners, architects, engineers, and MEP subcontractors. Maintain comprehensive records, logs, and communication reports throughout project execution. Support warranty closeout and ensure complete turnover packages upon completion. Qualifications: Bachelor’s degree in Construction Management, Engineering, or a related field; equivalent experience accepted. 10+ years of MEP or mechanical project management experience in commercial construction. Strong understanding of HVAC, electrical distribution, plumbing systems, and building automation controls. Experience with commissioning coordination and large-scale mechanical systems. Proven ability to manage projects up to $50M in value. Proficiency in Microsoft Office and construction management tools. Excellent communication, leadership, and client-facing skills. Local travel flexibility based on project needs. Compensation + Benefits: Competitive salary based on experience. Comprehensive medical, dental, and vision coverage. 401(k) with company match. Paid time off, holidays, and performance-based bonus opportunities. Company vehicle allowance and professional development support.

Job DescriptionSummary: We are representing a well-established general contractor seeking an experienced MEP Project Manager to lead the mechanical, electrical, plumbing, and commissioning scopes for a high-profile commercial project. This role is ideal for a seasoned Mechanical or MEP Project Manager with a strong background in complex building systems who can manage the process from installation through startup and turnover. The ideal candidate is highly organized, technically proficient, and comfortable managing MEP coordination while driving communication between field teams, design professionals, commissioning agents, and ownership. Key Responsibilities: MEP & Commissioning Oversight Serve as the primary point of contact for all MEP and commissioning scopes. Coordinate with commissioning agents to track system readiness, startup, and punch list closure. Conduct QA/QC spot checks on rough-ins and periodic system installations to ensure quality compliance. Lead planning meetings with trade partners to maintain milestone progress and ensure sequencing efficiency. Collaborate with design and field teams to resolve technical issues and design gaps. Manage all MEP-related RFIs, submittals, and documentation for startup and closeout. Project Management Oversee schedule, budget, and subcontractor performance for assigned scopes. Manage buyout, change orders, and project billing while ensuring accurate forecasting. Conduct jobsite walks and enforce safety compliance in coordination with the project team. Lead progress meetings with owners, architects, engineers, and MEP subcontractors. Maintain comprehensive records, logs, and communication reports throughout project execution. Support warranty closeout and ensure complete turnover packages upon completion. Qualifications: Bachelor’s degree in Construction Management, Engineering, or a related field; equivalent experience accepted. 10+ years of MEP or mechanical project management experience in commercial construction. Strong understanding of HVAC, electrical distribution, plumbing systems, and building automation controls. Experience with commissioning coordination and large-scale mechanical systems. Proven ability to manage projects up to $50M in value. Proficiency in Microsoft Office and construction management tools. Excellent communication, leadership, and client-facing skills. Local travel flexibility based on project needs. Compensation + Benefits: Competitive salary based on experience. Comprehensive medical, dental, and vision coverage. 401(k) with company match. Paid time off, holidays, and performance-based bonus opportunities. Company vehicle allowance and professional development support.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking a Managing Mechanical Engineer to join a multi-disciplinary team in our Mechanical Department. We offer full service in-house architecture/engineering design capabilities and typically work on a diverse array of projects including Higher Education, Municipal Facilities, Industrial, Design-build, Aviation and Healthcare. Responsibilities include working on all phases of projects such as client relationships, design, specifications, project team coordination, construction documents, code analysis and consultant interaction. Required Knowledge, Skills & Abilities • 10+ years of related mechanical/HVAC design and project management experience., • Bachelor’s degree in mechanical engineering, • Professional licensure PE is preferred, • Comprehensive understanding of design and construction documents., • Proficiency in CADD & REVIT., • Knowledge of building codes., • Ability to succeed in small and large multi-disciplinary team environments., • Ability to set deadlines, assign resources, monitor/summarize project progress., • Good graphic, communications (verbal and written) and presentation skills., • Self-motivated with ability to lead small and large project teams and multiple projects from concept to construction., • Higher Education and Healthcare experience, • Experience working with both private and public clients Estimated Compensation Range and Benefits $100,000 - $150,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description About PASCO PASCO has been delivering building automation and energy management solutions since 1972. With offices spanning across New York State, our team of 30+ engineers and automation specialists design and implement systems that monitor and control HVAC, lighting, central plants, and critical building environments. We specialize in customized building automation solutions and integrating both modern and legacy systems to help building owners improve efficiency, comfort, and operational control. Position Overview PASCO is seeking a Building Automation Systems Sales Manager to lead our sales team and drive growth throughout our Upstate New York territory. This role blends sales leadership, technical consulting, and relationship management, working closely with building owners, engineers, and contractors to deliver advanced automation and control solutions. Key Responsibilities • Lead and mentor the sales team in identifying and pursuing new business opportunities, • Develop sales goals and strategies to drive revenue growth, • Maintain strong relationships with customers to ensure long-term satisfaction, • Deliver technical presentations and demonstrate building automation system capabilities, • Work with sales personnel to develop project specifications, point lists, scopes of work, and proposals using plans and drawings, • Assist with bidding and closing new projects, • Collaborate with engineering, operations, and service teams to ensure project success, • Monitor engineering, project management, and subcontractor performance to ensure contract compliance, • Oversee pricing updates, bill-of-material cost structures, and estimating procedures, • Track sales performance and prepare reports measuring success, • Ensure accurate order processing and coordinate project handoff to engineering teams Requirements Required • Bachelor’s degree in Mechanical Engineering, Electrical Engineering, HVAC applications, or related field, or equivalent experience, • 8+ years of experience in building automation systems, HVAC controls, or related industry, • Experience leading or managing a sales team, • Ability to read and interpret engineering drawings and specifications, • Strong leadership, communication, and organizational skills, • Ability to prepare technical presentations and work with engineers and building owners, • Proficiency with standard computer and office software applications, • Valid NY State driver’s license and ability to travel within the territory, • Ability to work extended hours when needed and occasional overnight travel Preferred • MBA or advanced business education, • Experience in Energy Management Systems (EMS) or Building Automation Systems (BAS) Benefits Why Join PASCO • Established company with 50+ years in building automation and controls, • Opportunity to lead sales growth across Upstate New York, • Work alongside a team of highly skilled automation engineers, • Be part of a company focused on efficient, intelligent building environments, • Competitive base salary plus annual bonus

Job Title: Senior Project Manager – MEP (Healthcare Construction) Location: Rochester, NY (HYBRID) Employment Type: Direct Hire Salary: $130,000–$150,000 Bonus: Discretionary Annual Bonus Allowances: $452/month Vehicle Allowance + $80/month Phone Allowance Travel: No travel beyond commute to project site (mileage reimbursement provided) Position Overview Wheeler Staffing Partners is seeking an experienced Senior Project Manager – MEP on behalf of a leading mechanical/plumbing subcontractor supporting a long-term healthcare construction program in Rochester, NY. This role will oversee large-scale healthcare commercial construction projects, specifically mechanical, plumbing, and MEP scopes valued at $5M+ per project. The Senior Project Manager will be responsible for financial oversight, subcontractor management, quality assurance, safety compliance, and delivering successful project outcomes aligned with contractual commitments. This is a hybrid position, 3 onsite days at one of the Rochester Regional Health hospital project sites and 2 remote. This role requires extensive experience in healthcare MEP construction. Project Overview • Large hospital infrastructure program supporting 9 hospital locations, • 30-year agreement valued at $143.8M, • Focused on long-term mechanical and energy-related upgrades, • Guaranteed Maximum Price (GMP), Lump Sum, and concession-based contract structures Key Responsibilities Project Leadership & Execution • Oversee all financial, operational, and contractual aspects of assigned MEP healthcare construction projects., • Manage subcontractors and vendors to ensure compliance with code requirements and contract documents., • Lead the implementation of the Project-Specific Quality Assurance Plan., • Manage and mentor Assistant Project Managers., • Maintain strong relationships with clients, subcontractors, and vendors. Financial & Contract Management • Understand and manage project budgets under GMP, Lump Sum, or Concession Agreements., • Prepare monthly cost reviews and financial reporting using job management and accounting platforms., • Develop and manage the Schedule of Values for monthly client payment applications., • Negotiate and execute vendor purchase orders and subcontracts., • Oversee change management processes, including RFIs, drawing revisions, and client directives. Safety & Site Management • Maintain a safe work environment through site planning, Safety Plan reviews, Job Hazard Analysis (JHA) approvals, and job site walks., • Participate in toolbox talks and actively promote a safety-first culture., • Collaborate with the Project Superintendent on site utilization plans, access control, and cleanliness. Scheduling & Risk Management • Maintain and update the project baseline schedule., • Identify and manage project risks using a Risk Log., • Proactively communicate and mitigate scheduling or performance issues., • Lead project meetings with documented agendas and meeting minutes. Systems & Documentation • Oversee project setup and document control in Procore (or equivalent Job Management System)., • Ensure proper change management and documentation procedures in alignment with company SOPs., • Maintain accurate reporting, contract documentation, bonds, insurance, and energy savings requirements. Required Qualifications Experience • 10+ years of project management experience working for a plumbing/mechanical subcontractor., • 10+ years of MEP experience on large $5M+ healthcare commercial construction projects., • Proven experience managing hospital or healthcare facility construction projects., • Experience with GMP, Lump Sum, and concession contract structures., • Must provide a project list with resume submission. Education • Bachelor’s Degree in Construction Management, Engineering (Civil, Mechanical, Electrical, Environmental),, • OR, • Applicable field experience in HVAC/Plumbing trades. Ideal Candidate Profile • Trade progression background preferred (Plumber ? Foreman ? Superintendent ? Project Manager)., • Strong financial acumen and budget management experience., • Experience managing Assistant Project Managers and cross-functional project teams., • Effective presentation, verbal, and written communication skills., • Strong leadership, problem-solving, and client-facing capabilities., • Demonstrated commitment to safety, quality, and predictable outcomes. Benefits • Medical, Dental, and Vision Insurance, • 401(k) with Company Match (100% of first 3%, 50% of next 2%), • 120 Hours PTO, • 9 Paid Holidays, • Monthly Vehicle Allowance, • Monthly Phone Allowance, • Mileage Reimbursement, • Discretionary Annual Bonus Why Work with Wheeler Staffing Partners? At Wheeler Staffing Partners, we don’t just place professionals — we build long-term career partnerships. Our recruiting team provides personalized support throughout the hiring process, including resume consultation, interview preparation, compensation negotiation, and onboarding guidance. We work closely with industry-leading organizations to connect experienced professionals with impactful, career-defining opportunities. When you partner with Wheeler Staffing Partners, you gain a dedicated advocate committed to your long-term success.

Job DescriptionKey Responsibilities Manage HVAC construction projects from kickoff to closeout Develop project scopes, timelines, and schedules Coordinate subcontractors, vendors, and procurement activities Review blueprints, schematics, and HVAC technical drawings Supervise site operations and ensure compliance with safety standards Track project progress and provide regular status updates Resolve project issues with clients, engineers, architects, and subcontractors Conduct site inspections for quality control and compliance Handle change orders, documentation, and project closeout processes Maintain budget control and resource allocation throughout the project lifecycle Requirements Proven experience managing HVAC construction projects Strong background in commercial or industrial construction management Ability to read and interpret HVAC blueprints and schematics Experience with site supervision, safety protocols, and quality assurance Strong project scheduling and coordination skills Excellent communication and time management abilities Experience with civil engineering plans or civil site work is a plus Preferred Skills Project planning and scheduling Budget and cost management Vendor and subcontractor coordination Construction site management Problem-solving and leadership skills Benefits Health insurance Paid time off Cell phone reimbursement Fuel discount Company DescriptionSynectics is a leading staffing and workforce solutions company dedicated to connecting exceptional talent with top organizations. We specialize in IT, engineering, finance, healthcare, and professional services recruitment, offering both contract and permanent staffing solutions. With a people-first approach, we focus on understanding the unique needs of our clients and candidates to create long-term, successful matches. Our mission is to empower businesses with the right talent while helping professionals achieve rewarding career opportunitiesSynectics is a leading staffing and workforce solutions company dedicated to connecting exceptional talent with top organizations. We specialize in IT, engineering, finance, healthcare, and professional services recruitment, offering both contract and permanent staffing solutions. With a people-first approach, we focus on understanding the unique needs of our clients and candidates to create long-term, successful matches. Our mission is to empower businesses with the right talent while helping professionals achieve rewarding career opportunities

Job DescriptionDescription: About VP Supply Corp VP Supply Corp. is a leading wholesale distributor of HVAC, plumbing, and industrial supplies, serving contractors, engineers, and commercial customers. With a strong commitment to product expertise, customer service, and dependable inventory, VP Supply Corp. partners with customers to support successful project execution and long-term growth. Position Summary The Commercial HVAC Inside Sales Project Manager serves as the primary internal point of contact for commercial HVAC projects. This role supports outside sales representatives and contractor customers by managing project quotes, submittals, orders, and timelines while ensuring accuracy, responsiveness, and customer satisfaction throughout the life of each project. Key Responsibilities • Support commercial HVAC outside sales representatives and contractor customers on active projects, • Prepare detailed project quotes, takeoffs, and pricing for commercial HVAC equipment and systems, • Manage projects from initial quotation through order fulfillment and closeout, • Coordinate equipment orders, lead times, deliveries, and job site requirements, • Review project specifications, drawings, and schedules to ensure accurate product selection, • Prepare and process submittals, documentation, and job-related paperwork, • Communicate regularly with customers, manufacturers, and internal teams regarding project status, • Resolve order issues, backorders, and delivery challenges in a timely manner, • Maintain accurate project records, pricing, and communications in ERP/CRM systems, • Stay current on commercial HVAC products, manufacturer offerings, codes, and industry trendsRequirements: Qualifications & Experience • 3+ years of experience in commercial HVAC inside sales, project management, or distribution, • Strong knowledge of commercial HVAC equipment and systems, • Ability to read and interpret construction drawings, specifications, and schedules, • Excellent organizational, time management, and multitasking skills, • Strong attention to detail and accuracy, • Effective communication skills with contractors, sales teams, and manufacturers, • Proficiency with ERP/CRM systems and Microsoft Office, • Ability to work in a fast-paced, deadline-driven environment Preferred Qualifications • Experience working with commercial HVAC manufacturers and reps, • Familiarity with submittals, takeoffs, and project documentation, • Technical HVAC background or formal HVAC education, • Experience supporting design-build or plan-and-spec projects

Job Description Job Description Property Maintenance Technician Level II or III at Marsden Services, L.LC. Shifts: 10am-2pm Monday-Friday (20 hours per week. Part Time Job) Location: Rochester NY (One Property) No nicotine or tobacco use permitted on site in accordance with building and client policies. Job Duties: • Performing a variety of related duties including equipment installation, troubleshooting, repairs, and preventative maintenance in order to ensure the property and grounds are meeting the company’s established standards and any applicable laws., • Schedules, prioritizes, and ensures timely completion (48 hours) of all work orders., • Completes basic repairs related to HVAC, electrical work, carpentry, fixtures, plumbing, appliances, and windows., • Assists in prioritizing work orders and monitoring maintenance of buildings and equipment., • Perform all site-level preventative maintenance inspections and duties assigned., • Prepares vacant units as assigned., • Work collaboratively with vendor teams on identified maintenance projects., • Work with peer group to maintain an adequate inventory of hand tools, parts, and supplies in order to maintain a complete workshop area., • Maintain a positive, respectful, and professional manner with all residents, vendors, fellow employees, and the public., • Responsible for on-call emergency maintenance services as scheduled., • Assists in training and mentoring new maintenance technicians., • Attend relevant training courses and ensure all required certifications are current., • Comply with all company and customer safety program requirements and work to promote safety in the workplace. Requirements: • Must be able to work in a physically demanding environment. Frequent kneeling, lifting, pushing, pulling, bending and moving throughout the day., • Regular lifting of more than 20 lbs. and frequent lifting of up to 80 lbs. with assistance., • May encounter heights, ladders, uneven walking surface, stairs, confined spaces, dust, gas fumes from power equipment and noise., • Exposed to external weather conditions, drafts and interior temperature changes., • Will regularly handle supplies and tools with sharp edges., • Must be able to quickly and easily navigate the property/building as required to meet the job functions, including climbing stairs and walking the hallways and common areas., • High school graduate or equivalent., • 2-year Technical Degree or equivalent work experience., • Four years multi-family or commercial building maintenance or equivalent experience., • Intermediate computer skills include the ability to send & receive emails, enter hours worked on internet-based system and access/perform data entry in Microsoft Office products including Microsoft Excel., • All boilers license levels accepted and preferred., • Additional certifications: preferred., • Must provide own hand tools: Hammer, Screwdriver (Phillips and Slotted), Crescent Wrench, Channellock Pliers, Pipe Wrench, Allen Wrench, Utility Knife, Flashlight, Hacksaw, Nut Drive Set, ¼” Socket Set, Set of Star Bits, Wire Stripper, Torpedo level, Inspection Mirror, Cordless drill, Tape Measure, GFI Receptacle Tester, Handheld Infrared/Laser Thermometer, Basic Multimeter., • Ability to communicate effectively both written & orally., • Good interpersonal skills., • Valid driver's license., • Access to reliable transportation., • Ability to use tact, diplomacy and a clear, courteous manner when dealing with co-workers and the public., • Decision-making, problem solving, and time management skills., • Ability to handle multiple projects or tasks simultaneously with self-direction., • Ability to work collaboratively in a team environment., • Must be able to work on call; weekends as scheduled; must be available for overtime as needed. Why Join the Marsden Family? Marsden Services, L.L.C., Marsden Holding Company, is a facility services provider with an unmatched reputation for operational excellence. We clean, sanitize, and service large and small businesses across the United States. • Mentorship and Training specifically for the Trades EEO Statement Marsden is an Equal Opportunity Employer. Marsden does not discriminate against any employee or applicant for employment due to race, age, sex, creed, ancestry, disability, sexual or affectional orientation, marital, or veteran status, color, religion, national origin, status with regard to public assistance or any characteristic protected under federal, state or local law.

About the Company HVAC Distributors, Inc. is a full-service wholesale distributor and manufacturer representative of residential and light commercial heating and air-conditioning equipment and accessories. We serve the residential new construction, replacement, and light commercial segments of the HVAC industry in Pennsylvania, Maryland, Delaware, New York, West Virginia, and Virginia. About the Role Do you have Account Management experience, and are you seeking a new job in Rochester, New York? HVAC Distributors, Inc. is looking for a full-time Account Manager to join their team. The role comes with an attractive salary and benefits package, including a company car with a gas card. Responsibilities • Develop an annual Territory Plan in conjunction with the Regional Manager., • Define sales strategies and action plans for identified target accounts and prospects within the territory., • Establish new residential dealers and light commercial contractor accounts., • Grow sales volume with current accounts., • Maximize share of customers’ equipment spend., • Ensure personal face-to-face contact and continuous improvement of rapport and productive relationships with decision-makers in all classes of customers and prospects in the assigned territory., • Manage the process to convert dealers to company equipment brands and ensure achievement of all related internal and external deliverables, including assignment of pricing, dealer levels, services, and training. Qualifications • 5 years of Account Management experience., • 3 years of sales experience selling to contractors would also be beneficial. Required Skills • Previous account management experience., • Articulate and well accustomed to a client-facing role., • Willingness and ability to travel. Preferred Skills • Experience in the HVAC,. Plumbing, Lighting or similar industry. Pay range and compensation package If you’re looking to impact and create change positively, you'll be rewarded with an excellent salary and benefits package for your inclusive and committed approach. HVAC Distributors, Inc. is proud to offer competitive compensation with bonus plans, excellent benefits (Medical, Dental, Vision, 401K, Tuition Reimbursement, Flexible Spending Accounts, Paid Holidays and vacation, Group and Voluntary Life, Long-Term Disability) and more! Equal Opportunity Statement We'd love you to apply for this full-time Account Manager job, and we’re waiting to hear from you. Please reach out to HVAC Distributors, Inc. today.

Join Our Team! Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry. From pumps to scaffolding to general construction tools, we aim to be the only call needed to outfit a job site with the proper equipment. Not only do we offer a vast fleet that ranks among the best in the industry, we pair it all with a friendly and knowledgeable staff. Our employees are our greatest asset, and although we present a comprehensive equipment offering, our expertise and service are what truly distinguish us from the competition. We pride ourselves on investing in our workforce and offer competitive benefits, as well as extensive on-the-job training for all eligible employees. As a highly successful national company, we are constantly looking for talented individuals to support our growth. If you are interested in pursuing a rewardingcareer, we invite you to review our opportunities! Job Description Summary Mechanic Are you seeking an entrepreneurial, empowering workplace that allows you to: • Build skills by working on a variety of makes, models & equipment, • Develop new skills for a career track in service or operation management, • Work with an incredible team of people in a safety-focused environment Sunbelt Rentals--the fastest growing rental business in North America--is seeking a Mechanic. This mechanic/technician role performs preventive maintenance, perform diagnostics and make repairs on equipment in the safest, most effective way possible to avoid downtime. Our fleet varies by location but primarily include Aerial Work Platforms, general construction tools and equipment. Our specialty lines locations may have a fleet of large-scale power-generators, pumps, HVAC systems and oil/gas related equipment. Education or experience that prepares you for success: • High school diploma or GED required, some trade school or equivalent training desired, • 3 to 5 years of mechanic experience with similar diesel equipment and/or heavy equipment or specialty lines equipment (large-scale generators, pumps, HVAC or Oil & Gas equipment) strongly preferred Knowledge/Skills/Abilities you may rely on: • May need to provide mechanic's tools of the trade., • Advanced knowledge of hydraulic systems & troubleshooting skills, • Advanced knowledge of electrical systems & troubleshooting skills, • Ability to be flexible with changing priorities in a fast-paced environment., • Bilingual (Spanish or Other) may be required based on location needs The physical demands of this role require bending, squatting, crouching, reaching, lifting 50 pounds or more, and working indoors/outdoors when required by the job. The above description is not a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day. Reasonable accommodations may be made to comply with applicable laws. Sunbelt Rentals is an Equal Opportunity Employer - Minority/Female/Disabled/Veteran and any other protected class. Qualified Veterans Welcome & Encouraged to Apply! The following is a sample (but not exhaustive) list of the MOS, AFSC, and NEC Codes that may have transferrable skill sets that apply to this role: 711 713 2506 2584 4130 4133 4541 5899 6071 6072 7603 7607 7610 7618 13D 13M 13P 13R 13T 2T311A 2T311C 2T312A 2T312B 2T312C 2T331A 2T331C 2T332A 2T332B 2T332C 2T351 2T351A 2T351C 2T352A 2T352C 62B 63A 63D 63E 63H 63M 63N 63S 63T 63Y 88R 91A 91B 91E 91H 91L 91M 91P 91S ABE ABH AS CM EN GSM MM MM(NUC) MR SB Related experience may include: Shop Mechanic, Mechanic, Technician, Service Foreman, Service Manager, Shop Manager, Mechanic Supervisor, Technician Supervisor, Lead Mechanic, Lead Technician, Diesel Technician, Diesel Mechanic, Service Technician, Heavy Equipment Mechanic, Hydraulic Technician, Hydraulic Mechanic, ASE Certified Mechanic, IFPS Certified Technician Base Pay Range: $21.38 - 29.39 Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. Please visit https://www.sunbeltrentals.com/careers/ for more information on our benefits and to join our Talent Network. Sunbelt also provides a comprehensive benefits package to its full-time employees. This package includes: Health, Dental and Vision plans 401(k) Match Volunteer time off Short-term and long-term disability Accident, Life and Travel insurance, as well as flexible spending Tuition Reimbursement Options Employee Assistance Program (EAP) Length of Service Awards You will become eligible for benefits on the first of the month following 30 days from your start date. Sunbelt offers team members the following paid time off from work, subject to Sunbelt's policies (unless specified in a collective bargaining agreement): 12-25 vacation days depending on years of service 5 sick days 6 holidays 2 half day holidays 2 floating holidays 1 inclusion day 1 volunteer day Gear up for an exciting career! Sunbelt Rentals supports service members. Veterans encouraged to apply.

POSITION PURPOSE AND SUMMARY The Maintenance Technician position must demonstrate and promote a strong commitment to providing the best possible experience for our guests and associates. The position is responsible for ensuring that all property equipment is functioning, premises are maintained in a pristine condition, and that all guest rooms are in good repair. The position is responsible for ensuring that all tasks outlined in the Green Shield Binder and as directed by the management team and/or Regional Asset Manager are completed in a timely fashion in accordance with company standards. MAJOR / KEY JOB DUTIES • Demonstrates and promotes a 100% commitment to providing the best possible experience for our guests and associates., • Works with minimal supervision while performing all essential duties to satisfaction and within company standards., • Responds to and assists with all guest requests with diligent follow-through in accordance with company guidelines and procedures., • Performs the out of room cleaning outlined in the Green Shield Binder to ensure that the premises are maintained in pristine condition. This includes but is not limited to trash and debris, trash containers, cleanliness of building interior and exterior, grounds, walkways, stairwells, driveways and parking areas to include removal of snow/ice in walkways were applicable., • Performs repairs listed on work orders and following the work order process as outlined in the Green Shield Binder. Repairs must be made in a timely fashion and professional manner., • Completes preventative maintenance inspections and repairs as outlined in the Green Shield Binder., • Follows the Green Shield Inspection schedule on a daily basis in order to accomplish all tasks outlined in a timely fashion in accordance with company standards., • Maintains all records as outlined within the Green Shield Binder to include but not limited to Guest Room PM deficiencies, PM Room Inspections, Life Safety Inspections, Elevator Inspections and Non-Guest Room Deficiency Log., • Follow the outlined workflow on the Green Shield Schedule, utilizes the SOPs as a reference guide to complete all tasks per company standards., • Maintains organized and clean work area in the maintenance room, while managing and safeguarding all maintenance tool inventory daily. Ensures that all tools are in good working condition., • Maintains clean and organized boiler rooms, electric rooms, HVAC rooms, fire sprinkler rooms, in accordance with company standards and local ordinances., • Ensures that all fire safety equipment (fire alarm system, smoke detectors, CO detectors, fire extinguishers, etc.) are operational and that inspections are current and in compliance with company standards and local ordinances., • Compliance with all ESA safety and security policies and procedures to include OSHA and ADA., • Where applicable to include maintenance of pool and or spa in accordance with ESA policies, procedures and in compliance with local ordinance., • Handles or assists with the response to emergencies at the property or sister location when asked by management., • Monitors and follows up with outside vendors when directed by management. OTHER DUTIES • Assists with cleaning any areas of the hotel as assigned by the manager when needed to include but not limited to font desk, associate breakroom, guest laundry, fitness room, vending areas, stairwells and common areas., • Responsible for maintaining overall hotel cleanliness., • Other duties as assigned by the management team. KNOWLEDGE, SKILLS, ABILITIES & COMPETENCIES • Read and speak English proficiently and interact with guests, associates and outside vendors., • Understand and follow safety rules, operating and maintenance instructions, procedure manuals, and company guidelines and standards., • Write routine reports and correspondence., • Add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Use units of measurement for weight, volume and distance., • Apply good judgment at all times., • Assist with resolving guest issues in accordance with company policies. ENVIRONMENTAL JOB REQUIREMENTS • Regularly required to remain stationary, be mobile, navigate the hotel, handle, reach, and detect objects, tools, or controls, and detect scent and detect sounds., • Position self to access low areas, traverse heights and remain stable while doing so, balance, and the ability to bend, kneel, or crouch., • Occasionally push/pull objects (tools/carts/cleaning equipment) weighing up to 50 pounds., • Discern or detect items in guest rooms to ensure safe performance of work., • Frequently work in outside weather conditions (depending on hotel)., • Occasionally work in wet humid conditions (non-weather related), near moving mechanical parts, in the presence of fumes or airborne particles and toxic or caustic chemicals, and risk of electrical shock., • Typically, moderate to loud noise levels in the work environment., • The associate may be asked to travel to help additional locations within a reasonable geography. MINIMUM QUALIFICATIONS • High School Diploma or General Education Degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.

Join Our Team! Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry. From pumps to scaffolding to general construction tools, we aim to be the only call needed to outfit a job site with the proper equipment. Not only do we offer a vast fleet that ranks among the best in the industry, we pair it all with a friendly and knowledgeable staff. Our employees are our greatest asset, and although we present a comprehensive equipment offering, our expertise and service are what truly distinguish us from the competition. We pride ourselves on investing in our workforce and offer competitive benefits, as well as extensive on-the-job training for all eligible employees. As a highly successful national company, we are constantly looking for talented individuals to support our growth. If you are interested in pursuing a rewardingcareer, we invite you to review our opportunities! Job Description Summary Technician 1 Are you seeking an entrepreneurial, empowering workplace that allows you to: • Build skills by working on a variety of makes, models & equipment, • Develop new skills for a career track in service or operation management, • Work with an incredible team of people in a safety-focused environment Sunbelt Rentals--the fastest growing rental business in North America--is seeking a Technician. This Technician role performs preventive maintenance and makes repairs on equipment in the safest, most effective way possible to avoid downtime. Our fleet varies by location but primarily include Aerial Work Platforms, general construction tools and equipment. Our specialty lines locations may have a fleet of large-scale power-generators, pumps, HVAC systems and oil/gas related equipment. Education or experience that prepares you for success: • High school diploma or GED required, some trade school or equivalent training desired, • 1 to 3 years of Technician experience with diesel equipment, heavy construction equipment or specialty lines equipment (large-scale generators, pumps, HVAC or Oil & Gas equipment) strongly preferred Knowledge/Skills/Abilities you may rely on: • May need to provide tools of trade, • Knowledge of hydraulic systems and troubleshooting fundamentals, • Knowledge of electrical systems and troubleshooting fundamentals, • Ability to be flexible with changing priorities in a fast-paced environment, • Bilingual (Spanish or Other) may be required based on location needs The physical demands of this role require bending, squatting, crouching, reaching, lifting 50 pounds or more, and working indoors/outdoors when required by the job. The above description is not a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day. Reasonable accommodations may be made to comply with applicable laws. Sunbelt Rentals is an Equal Opportunity Employer - Minority/Female/Disabled/Veteran and any other protected class. Qualified Veterans Welcome & Encouraged to Apply! The following is a sample (but not exhaustive) list of the MOS, AFSC, and NEC Codes that may have transferrable skill sets that apply to this role: 711 713 2506 2584 4130 4133 4541 5899 6071 6072 7603 7607 7610 7618 13D 13M 13P 13R 13T 2T311A 2T311C 2T312A 2T312B 2T312C 2T331A 2T331C 2T332A 2T332B 2T332C 2T351 2T351A 2T351C 2T352A 2T352C 62B 63A 63D 63E 63H 63M 63N 63S 63T 63Y 88R 91A 91B 91E 91H 91L 91M 91P 91S ABE ABH AS CM EN GSM MM MM(NUC) MR SB Related experience may include: Shop Mechanic, Mechanic, Technician, Service Foreman, Service Manager, Shop Manager, Mechanic Supervisor, Technician Supervisor, Lead Mechanic, Lead Technician, Diesel Technician, Diesel Mechanic, Service Technician, Heavy Equipment Mechanic, Hydraulic Technician, Hydraulic Mechanic, ASE Certified Mechanic, IFPS Certified Technician Base Pay Range: $18.99 - 26.11 Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. Please visit https://www.sunbeltrentals.com/careers/ for more information on our benefits and to join our Talent Network. Sunbelt also provides a comprehensive benefits package to its full-time employees. This package includes: Health, Dental and Vision plans 401(k) Match Volunteer time off Short-term and long-term disability Accident, Life and Travel insurance, as well as flexible spending Tuition Reimbursement Options Employee Assistance Program (EAP) Length of Service Awards You will become eligible for benefits on the first of the month following 30 days from your start date. Sunbelt offers team members the following paid time off from work, subject to Sunbelt's policies (unless specified in a collective bargaining agreement): 12-25 vacation days depending on years of service 5 sick days 6 holidays 2 half day holidays 2 floating holidays 1 inclusion day 1 volunteer day Gear up for an exciting career! Sunbelt Rentals supports service members. Veterans encouraged to apply.

Join Our Team! Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry. From pumps to scaffolding to general construction tools, we aim to be the only call needed to outfit a job site with the proper equipment. Not only do we offer a vast fleet that ranks among the best in the industry, we pair it all with a friendly and knowledgeable staff. Our employees are our greatest asset, and although we present a comprehensive equipment offering, our expertise and service are what truly distinguish us from the competition. We pride ourselves on investing in our workforce and offer competitive benefits, as well as extensive on-the-job training for all eligible employees. As a highly successful national company, we are constantly looking for talented individuals to support our growth. If you are interested in pursuing a rewardingcareer, we invite you to review our opportunities! Job Description Summary Technician Are you seeking an entrepreneurial, empowering workplace that allows you to: • Build skills by working on a variety of makes, models & equipment, • Develop new skills for a career track in service or operation management, • Work with an incredible team of people in a safety-focused environment Sunbelt Rentals--the fastest growing rental business in North America--is seeking a Technician. This Technician role performs preventive maintenance, perform advanced diagnostics, and make complex repairs on equipment in the safest, most effective way possible to avoid downtime. Our fleet varies by location but primarily include Aerial Work Platforms, general construction tools and equipment. Our specialty lines locations may have a fleet of large-scale power-generators, pumps, HVAC systems and oil/gas related equipment. Education or experience that prepares you for success: • High school diploma or GED required, some trade school or equivalent training desired, • 5 +years of Technician experience with similar diesel equipment and/or heavy equipment or specialty lines equipment (large-scale generators, pumps, HVAC or Oil & Gas equipment) strongly preferred Knowledge/Skills/Abilities you may rely on: • May need to provide tools of the trade, • Advanced knowledge of hydraulic systems & troubleshooting skills, • Advanced knowledge of electrical systems & troubleshooting skills, • Ability to be flexible with changing priorities in a fast-paced environment The physical demands of this role require bending, squatting, crouching, reaching, lifting 50 pounds or more, and working indoors/outdoors when required by the job. The above description is not a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day. Reasonable accommodations may be made to comply with applicable laws. Sunbelt Rentals is an Equal Opportunity Employer - Minority/Female/Disabled/Veteran and any other protected class. Qualified Veterans Welcome & Encouraged to Apply! The following is a sample (but not exhaustive) list of the MOS, AFSC, and NEC Codes that may have transferrable skill sets that apply to this role: 711 713 2506 2584 4130 4133 4541 5899 6071 6072 7603 7607 7610 7618 13D 13M 13P 13R 13T 2T311A 2T311C 2T312A 2T312B 2T312C 2T331A 2T331C 2T332A 2T332B 2T332C 2T351 2T351A 2T351C 2T352A 2T352C 62B 63A 63D 63E 63H 63M 63N 63S 63T 63Y 88R 91A 91B 91E 91H 91L 91M 91P 91S ABE ABH AS CM EN GSM MM MM(NUC) MR SB Related experience may include: Shop Mechanic, Mechanic, Technician, Service Foreman, Service Manager, Shop Manager, Mechanic Supervisor, Technician Supervisor, Lead Mechanic, Lead Technician, Diesel Technician, Diesel Mechanic, Service Technician, Heavy Equipment Mechanic, Hydraulic Technician, Hydraulic Mechanic, ASE Certified Mechanic, IFPS Certified Technician Base Pay Range: $24.05 - 33.06 Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. Please visit https://www.sunbeltrentals.com/careers/ for more information on our benefits and to join our Talent Network. Sunbelt also provides a comprehensive benefits package to its full-time employees. This package includes: Health, Dental and Vision plans 401(k) Match Volunteer time off Short-term and long-term disability Accident, Life and Travel insurance, as well as flexible spending Tuition Reimbursement Options Employee Assistance Program (EAP) Length of Service Awards You will become eligible for benefits on the first of the month following 30 days from your start date. Sunbelt offers team members the following paid time off from work, subject to Sunbelt's policies (unless specified in a collective bargaining agreement): 12-25 vacation days depending on years of service 5 sick days 6 holidays 2 half day holidays 2 floating holidays 1 inclusion day 1 volunteer day Gear up for an exciting career! Sunbelt Rentals supports service members. Veterans encouraged to apply.

Job Description Summary The Hotel Engineer is responsible for the maintenance, repair, and overall upkeep of the hotel’s physical structure, equipment, and systems to ensure a safe, functional, and welcoming environment for guests and staff. This role involves troubleshooting and performing preventive maintenance on HVAC, plumbing, electrical, and mechanical systems, as well as responding promptly to guest service requests and maintenance issues. The Hotel Engineer also supports energy efficiency efforts, safety compliance, and coordinates with outside vendors when necessary to maintain high operational standards. Essential Duties and Responsibilities • Assist in troubleshooting equipment and making repairs, i.e. performing minor and routine painting, plumbing, electrical wiring, and other related maintenance activities., • Perform and accurately record Preventative Maintenance in the Guest Rooms & Public Area Equipment, • Maintain pool including proper chemical levels and water quality., • Assist with snow removal including brushing off cars, shoveling and salting walkways as necessary., • Assist with upkeep and appearance of outside grounds. Includes weeding and other landscape bed maintenance., • Follow safety and security measures. Report or correct any hazardous conditions observed immediately., • Must be able to work unsupervised., • Maintain cleanliness of Maintenance shop and practice “clean as you go”., • Maintain guest privacy., • Assist with guest issues, be professional and maintain a hospitable caring attitude., • Communicate effectively with staff and management, • Respond to all maintenance work orders in a timely manner Qualifications • High school diploma; or equivalent combination of education and experience., • The employee must be able to lift and/or move up to 50 pounds., • While performing the duties of this Job, the associate is regularly exposed to fumes or airborne particles, chemicals and dust., • The associate is frequently exposed to outside weather conditions. The noise level in the work environment is usually moderate., • The associate works in an environment open to the general public. Why Join Indus Hospitality Group? At Indus Hospitality Group, we offer a dynamic work environment that fosters growth, innovation, and collaboration. Our team provides exceptional service and creates memorable experiences for both our guests and employees. Joining us means being part of a supportive, inclusive culture where your contributions are valued, and your career development is a priority. We are committed to providing you with opportunities for personal and professional growth, ensuring that you have the tools and resources to thrive in your role. If you are a self-motivated, detail-oriented individual with a passion for recruitment, we invite you to apply for this exciting opportunity to make a meaningful impact on our team and help shape the future of our organization. Come grow with us at Indus Hospitality Group!

Job Description A family-owned business since 1924, A. Duie Pyle provides a range of integrated transportation and distribution solutions throughout the Northeast. Supported by our vast network of Less-Than-Truckload (LTL) service centers, warehouse facilities, and dedicated locations, we have the ability to offer flexible and seamless integrated solutions tailored to our customer’s needs. Simply put, when it comes to integrated supply chain solutions, Pyle People Deliver. Our promise is to provide outstanding service as it remains to be our first and foremost mission. Position Summary: As a Facilities Maintenance Technician for Pyle you will maintain safe, efficient, and productive building and grounds environment at all ADP properties as assigned by supervision/management. The responsibilities of the position include, but are not limited to: • Safely performing applicable building repairs and preventative maintenance (electrical, electronics, plumbing, HVAC, carpentry, etc.), • Maintaining and or troubleshooting routine electrical/burg/fire protection systems, devices, etc., • Maintaining commercial/industrial property components including but not limited to dock plates, overhead doors, fire pumps, fire suppression systems, HVAC filter & belt maintenance, domestic water systems, snow scraping devices, roofs and similar structures, UST/AST and delivery systems, truck./car and man gates and fencing, painting, cleaning, etc., • Maintaining company property grounds which may include but not limited to lawn care, landscaping, asphaltic and concrete surfaces, snow plowing/shoveling, • Operating forklifts, aerial work platforms and other operating equipment, • Performing property/facility visual inspections to include fire suppression devices, lighting, ingress/egress, OSHA, • Responding to after-hours/emergency calls at responsible property locations, • Maintaining and organizing files/documentation for applicable facilities To be qualified for this position, you must possess the following: • HS diploma or equivalent, • Clean, verifiable driving record (MVR), • Self-motivated, self-starter, • Verifiable skills in Facilities Maintenance arena, • Skills required include mechanical, plumbing, carpentry, electrical, welding, • Experience with gas/oil burners and hydraulics are beneficial, • Electrical, HVAC, lift truck certifications or advanced licensing a plus Physical Requirements: • Must be able to lift 50+ lbs., • Must be able to walk long distances, over diverse terrain, for long periods, • Must be able to climb ladders, work at height, or roofs as required, • Sitting at desk for long periods of time., • Viewing PC monitor and using keyboard for long periods of time., • Diverse settings can be external or internal, and during periods of inclement weather We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

About the Role: Are you an experienced project manager with a passion for construction, facilities optimization, and driving operational excellence? We are looking for a driven professional to join our Facilities Management group. In this dynamic role, you will be the driving force behind our building renovations, capital infrastructure improvements, and equipment installations. You will manage projects from cradle to grave, partnering with contractors and internal teams to support the expansion and relocation of our personnel and assets. If you are metric-driven, customer-focused, and excel in a fast-paced environment, we want you on our team! What You Will Do: • Full-Lifecycle Project Management: Oversee all phases of facilities projects, including requirement evaluation, estimating, scheduling, budget management, design oversight, and project close-out., • Contractor & Stakeholder Coordination: Effectively manage and partner with contractors, vendors, and cross-functional teams (including Facilities Maintenance and Operations) to meet program requirements., • Design & Compliance Support: Provide architectural design, construction management, and code compliance support., • Drive Efficiency: Champion value engineering, cost improvements, and process efficiencies using business operating systems., • Financial Oversight: Support the development of capital and expense budgets for the corporation., • Portfolio Management: Manage multiple projects simultaneously, ranging from large sole-responsibility initiatives to collaborative team efforts. What You Bring to the Table: • Education & Experience: Bachelor’s Degree in Engineering (or a related field) with 6+ years of experience, OR a Graduate Degree with 4+ years of prior related experience., • Technical Expertise: Strong background facilitating the design and execution of architectural, electrical, and HVAC systems. Experience with both Design-Build and Design-Bid-Build projects., • Software Proficiency: Hands-on experience with AutoCAD, MS Project, Estimating software, and Microsoft Office., • Blueprint Literacy: Ability to work confidently with engineering blueprints, process specifications, and building layouts., • Regulatory Knowledge: Deep understanding of applicable laws and codes, including OSHA, ADA, NFPA, NEC, EPA, and local Building Codes., • Clear Communication: Exceptional organizational, interpersonal, and communication skills to navigate a diverse and changing environment., • Clearance & Travel: Must have the ability to obtain a US security clearance and be willing to travel up to 30% as needed.

Job Description Konar Properties is a family-owned real-estate development company. We develop, own, and manage commercial properties and multi-family communities in Rochester and Western NY. Konar Properties is an equal opportunity employer (EOE) and is committed to diversity in all areas of the organization. We are looking for FT highly skilled Maintenance Technicians in Residential Property Management. Candidates must have a valid driver's license. A min. 3 years' experience in the apartment maintenance or similar trade, plus experience in apartment turnovers required. Maintenance Technician skills required: carpentry, HVAC, electrical, plumbing, painting, drywall. High School Diploma or greater required. "Sign-on Bonus" & Excellent benefits! • Comprehensive health insurance with 75% premium covered by employer, • 401K retirement benefits with employer match, • Profit sharing bonus paid semi-annually, • Vacation and sick paid time off, • Paid Parental Leave, • Employer paid STD/LTD, • Employer-paid life insurance, • Holiday pay including paid birthday holiday, • Annual company celebrations/events

Job DescriptionDescription: Are you looking for a career that offers you the opportunity to share your talents and make a positive impact on the people within our community? Join the Landsman family and take the opportunity to utilize all your skills. Whether you are working independently on projects or alongside other members of the team, you can make a difference. We’re looking to hire a hard-working, motivated, customer service minded individual for the full-time position of Maintenance Technician. Here is a summary of what we need from you: • Effective experience with work including routine resident service requests, preventative maintenance, emergency maintenance, capital improvement and replacements, tool and equipment maintenance, and seasonal maintenance., • Experience with performing maintenance and/or repairs to building systems and apartments (Knowledge of plumbing, carpentry, electrical, appliances, painting/drywall, HVAC, fire and security systems, elevators, as applicable.), • Snow removal experience. It will be mandatory., • The ability to be on-call for evening and weekend emergencies. Reliable transportation is a must., • Excellent interpersonal and communication skills required to interact with residents, vendors, and office staff., • Standard background check and drug screening required. What we offer our full-time employees: • Medical, Dental and Vision benefits, • Company Paid Life Insurance, • Voluntary Life Insurance, • Supplemental Short-Term Disability, • Company Paid Long-Term Disability, • 401k Retirement Plan with Company Match, • Employee Referral Bonus Program, • Paid Time Off, • 10 Paid Holidays Annually Landsman is proud of the fine reputation we have earned as a high-quality professional real estate management organization and would like you to join our team. Contact us now to learn more about this great opportunity! Landsman Development Corp. (LDC) was established in 1971 by its founder and initial shareholder, Elliott Landsman. Since its inception, the company has developed and invested in a wide variety of projects including industrial, commercial, office, retail, and multi-family residential, both subsidized and conventional. Most of the properties developed are owned by partnerships in which LDC has retained an interest as managing general partner or managing member. Mayzon Management Corporation was incorporated in 1972 to manage real estate developed by its parent company, Landsman Development Corp. The company name has evolved over the years, and the name has been changed to Landsman Real Estate Services, Inc. Landsman has grown to manage more than 2,400 rental units and over three million square feet of industrial, commercial and office space and has also become the property management company of choice for several third-party owners. Requirements: Minimum Educational Requirements: High School Diploma or equivalent. Minimum Experiential Requirements: • 2+ years multifamily or construction site management., • Prior experience related to carpentry, plumbing, electrical, appliance, HVAC, and building systems. Special Skills/ Work Conditions Required: • Must have excellent communication, interpersonal, customer service, organizational and time management skills., • Must be able to communicate in English with residents, emergency providers and outside contractors., • Must have a mechanical aptitude; skillful use of equipment and tools, and have physical and manual dexterity skills., • Required use of a cell phone while on call., • Must be able to manage a flexible schedule including overtime and be on-call as assigned., • Must be able to lift, move and transport up to 50lbs without the assistance of hand truck, dolly, or other mechanical lifting devices. Must be able to walk, bend, stoop, climb stairs, access and work in confined spaces as well as at heights in excess of 20 feet and have the mobility required to use ladders.

Job DescriptionDescription: We are Hiring! Job Posting: Maintenance Tech II Location: Rochester, NY Department: Facilities Employment Type: Full-Time, 40 hrs. Schedule: Monday-Friday Salary: $28.00-28.50 As a regional agency of Catholic Charities of the Diocese of Rochester, Catholic Charities Family and Community Services (CCFCS) has been serving our community for over 100 years. We walk with people when they are at their most vulnerable as they journey toward independence to reach their full human potential, advocate for those in need throughout all stages of life; and work in partnership with faith communities of all denominations and those who are committed to addressing local needs. If you’re looking for an opportunity to express and explore your passion for helping others, then join a team that truly makes a difference DAILY, in people's lives. Don't miss out on being a part of something special! General Description Under general supervision, performs a wide range of facilities services. Effectively supports ongoing and collaborative communication amongst all program staff and is responsible for ensuring a trauma informed care environment. Special Requirements Required to purchase and use own hand tools. Essential Duties and Responsibilities • Responsible for all aspects of preventive maintenance to ensure safe and secure Agency facilities. o Make appropriate repairs as directed by Supervisor. o Monitor sand reports any property damage to Agency facilities to Supervisor. o Maintains cleanliness and repair of buildings to include windows, flooring, and appliances. o May oversee contractors/vendors work for quality and adherence to contracts. o Janitorial duties may include but are not limited to cleaning/waxing floors, filling paper supplies, cleaning walls, washing windows, etc. o May be required to set up and tear down for Agency meetings, perform office moves, and painting. o Utilize advanced trade skills which may include, but are not limited to plumbing, electrical, or HVAC. • Provide worksheets outlining completed tasks to supervisor at the end of each day., • Provide tracking sheets to supervisor at the end of each week., • Perform on-call procedures assigned by supervisor., • Actively participate in staff meetings and training as required., • Awareness of and active support of the Agency's Mission, Vision, Values and Strategic Plan. Including, but not limited to, supporting the Agency's Core Competency initiatives of being Collaborative and Community Focused, Innovative and Entrepreneurial, and Culturally Competent and Diverse, • Participates in relevant Agency meetings and/or trainings, • Actively pursues development of professional competencies related to job performance through reading, supervision, in-service training and attendance at conferences and workshops., • Awareness and active support of the Agency's Mission, Vision, Values and Strategic Plan. Including, but not limited to, supporting the Agency's Core Competency initiatives of being Collaborative and Community Focused, Innovative and Entrepreneurial, and Culturally Competent and Diverse, • Other duties as assigned Note: The above description is illustrative of tasks and responsibilities. It is not meant to be all inclusive. Employees are required to follow appropriate supervisory directions and perform other related duties as required. Requirements: Qualifications Education: High School Diploma or equivalent combination of education and experience will be considered. Skilled in advanced trade including but not limited to plumbing, electrical, or HVAC. Experience: Minimum of 2 years’ maintenance experience required. Candidates must have mechanical aptitude. Experience with energy management systems; Access Control Systems; IT wiring and Monitoring/Camera Systems preferred. Candidate must have valid NYS Driver’s License with a driving record that follows Agency guidelines. Candidates must have reliable transportation as frequent travel between sites is required. Physical Demands/Work Environment: The physical demands/work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, talk, hear, stand, walk, use hands to type and/or perform light lifting. Specific vision abilities required by this job include close vision, distance vision and ability to adjust focus. The noise level in the work environment is usually quiet. Compliance: Adheres to all applicable federal and state laws and regulations including, but not limited to, those governing confidentiality, privacy, program, billing and documentation standards. All duties must be performed in accordance with CCFCS’s corporate compliance & ethics program. Any offer of employment will be contingent upon successful completion of a background check. CCDOR considers all background check information in accordance with applicable law. Top Benefits and Perks: • Competitive salary and 403b retirement plan, • Generous time off package and work-life balance, • Comprehensive benefits package, • Supportive and collaborative environment, • Opportunities for growth and development, • Intrinsic reward of truly making a difference in people's lives Join us and help make a positive impact on our community! *Catholic Charities is committed to leveraging the talent of a diverse workforce to create great opportunities for our agency and our people. EOE/AA Disability/Vet

Job DescriptionSalary: $100k-$150k base This is a field-based positionrequiring regular weekly travel and on-site work at client project locations, as assigned. The initial assignments are in New York, Texas, Wyoming, Ohio, and Pennsylvania. The initial assignment is expected to last several months, with future assignments varying based on project needs and client requirements. Candidates must maintain a permanent residence and be willing to travel to assigned project sites on a weekly basis. The company offers travel expense reimbursement in accordance with company policy. Company: Vertex Innovations: www.vertex-us.com Job Title: Cx / QA/QC Support Specialist (Mechanical) Location: Multiple Locations: will offer relocation if needed: New York, Texas, Wyoming, Ohio, Pennsylvania Job Type: Full-Time, W-2 Salaried position: full benefits Position Overview: The Mechanical Cx / QA/QC Support Specialist ensures that mechanical systems in data center projects meet all quality, safety, and operational requirements. This role combines proactive oversight with reactive problem-solving to verify that systems are properly designed, installed, tested, and commissioned in accordance with owner expectations and industry standards. Working collaboratively with trade partners, engineers, and customer teams, the specialist maintains professionalism under pressure and fosters a culture of cooperation and continuous improvement. The ideal candidate has deep experience in mechanical system commissioning, a strong grasp of data center operations, and excellent communication and analytical skills. Qualifications: • Bachelors degree in Mechanical Engineering or a related field. Equivalent experience may be considered., • Relevant certifications, such as Certified Commissioning Professional (CCP), ASHRAE Commissioning Process Management Professional (CPMP), or LEED Accredited Professional, are a plus. Experience • Minimum of 5 years of experience in mechanical systems commissioning, preferably in the data center or mission-critical facilities sector., • Extensive knowledge of mechanical systems, including HVAC, chilled water systems, and airflow management., • Hands-on experience with mechanical testing methods, including Test and Balance (TAB) procedures, hydronic flushing and chemical treatment, pipe pressure testing, pump performance verification, airflow measurement, vibration analysis, and refrigerant leak testing., • Working knowledge of data center Tier classifications and redundancy topologies (e.g., Uptime Institute Tier III/IV, N+1, 2N, 2N+1) and their impact on mechanical commissioning sequencing and concurrent maintainability., • Familiarity with industry standards and guidelines, such as ASHRAE, SMACNA, NEBB, AABC, ASME, and NFPA. Skills • Strong understanding of mechanical system design, installation, and operation., • Exposure to Building Management Systems (BMS), Building Automation Systems (BAS), and DDC controls integration for functional testing and system validation., • Proficient in using commissioning and project management tools, such as Cx Alloy, Bluebeam, Procore, or similar platforms., • Excellent problem-solving and analytical skills., • Strong verbal and written communication skills., • Ability to work independently and collaboratively in a fast-paced environment. Key Responsibilities: • Bachelors degree in Mechanical Engineering or a related field. Equivalent experience may be considered., • Relevant certifications, such as Certified Commissioning Professional (CCP), ASHRAE Commissioning Process Management Professional (CPMP), or LEED Accredited Professional, are a plus. Experience • Minimum of 5 years of experience in mechanical systems commissioning, preferably in the data center or mission-critical facilities sector., • Extensive knowledge of mechanical systems, including HVAC, chilled water systems, and airflow management., • Hands-on experience with mechanical testing methods, including Test and Balance (TAB) procedures, hydronic flushing and chemical treatment, pipe pressure testing, pump performance verification, airflow measurement, vibration analysis, and refrigerant leak testing., • Working knowledge of data center Tier classifications and redundancy topologies (e.g., Uptime Institute Tier III/IV, N+1, 2N, 2N+1) and their impact on mechanical commissioning sequencing and concurrent maintainability., • Familiarity with industry standards and guidelines, such as ASHRAE, SMACNA, NEBB, AABC, ASME, and NFPA. Skills • Strong understanding of mechanical system design, installation, and operation., • Exposure to Building Management Systems (BMS), Building Automation Systems (BAS), and DDC controls integration for functional testing and system validation., • Proficient in using commissioning and project management tools, such as Cx Alloy, Bluebeam, Procore, or similar platforms., • Excellent problem-solving and analytical skills., • Strong verbal and written communication skills., • Ability to work independently and collaboratively in a fast-paced environment. Compensation: • Annual base salary dependent on experience and location, • Health Benefits: Medical, Dental, Vision, LTD/STD, Life-AD&D, • Retirement: 401(k), discretionary Pension & Profit sharing, subject to Plan documents, • 15 days paid time off (prorated based on start date) and 8 holidays About Vertex Vertex Innovations has supported mission-critical and data center deployments nationwide for more than two decades. Our teams provide construction oversight, QA/QC, commissioning support, and technical program management for hyperscale, enterprise, and telecom clients. We deliver quality, reliability, and trusted partnership on every project. Vertex Core Values • Integrity To move through the world with honesty and truth empowering our employees, clients and communities through our words and actions., • Accountability To take full ownership and responsibility in our roles as we serve our company, clients and communities., • Commitment To stand behind our word and our promises, • Respect To embrace and honor the individuals, clients, and companies in their contribution to the work that we create together through our interactions, conversations and our way of being., • Performance To allow ourselves to be measured by our commitments and be accountable for every action to our employees, clients, and communities. VERTEX Innovations, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionJob Description.Facilities Maintenance Technician.We are seeking a reliable and hands‑on.Facilities Maintenance Technician.This role covers both interior and exterior maintenance, light electrical and HVAC work, landscaping, and inventory management to maintain safe, clean, and full

This role covers both interior and exterior maintenance, light electrical and HVAC work, landscaping, and inventory management to maintain safe, clean, and fully functional facilities. Ability to read and follow maintenance and operational instructions. Landscaping and exterior property maintenance.

This role covers both interior and exterior maintenance, light electrical and HVAC work, landscaping, and inventory management to maintain safe, clean, and fully functional facilities. HVAC, plumbing, or electrical repair.

Our client, a leader in facilities management and maintenance services, is seeking a dedicated Mobile HVAC Technician to join their team. As a Mobile HVAC Technician, you will be an essential part of the Facilities Support team, ensuring the smooth operation and maintenance of critical building syst

Job Description Facility Management Contractors Needed (Plumbing, Electrical, HVAC, Handyman) We are seeking experienced independent contractors to handle commercial facility management work orders in the following trades: Plumbing Electrical HVAC (Commercial) General Repair / Handyman This is ongoing 1099 contract work for skilled professionals who can independently diagnose and complete commercial repairs. Responsibilities by Trade Plumbing Commercial plumbing repairs and drainage issues Leak detection and repair Fixture replacements (toilets, faucets, valves) Water heater troubleshooting Electrical Troubleshooting electrical problems Running new lines and circuits Replacing breakers, outlets, and lighting fixtures Resolving power and system issues Handyman / General Repair Drywall repair and painting Minor carpentry and door repairs Ceiling tile and fixture replacement General facility maintenance tasks HVAC Troubleshooting commercial RTUs and other units Repairing motors, belts, thermostats Preventative maintenance Diagnosing heating and cooling issues Requirements Proven commercial experience in your trade Ability to work independently Own tools and reliable transportation Proper licensing (as required) Strong troubleshooting skills Professional communication We offer consistent work orders and long-term contractor opportunities. Apply today with your trade specialization, experience, and service area. Company DescriptionWe are a facility management company with over 15 years of experience delivering reliable, high-quality services. Our team provides prompt, on-time responses to a wide range of store and facility needs, ensuring smooth operations for our clients. Trusted by numerous businesses, we are committed to excellence, efficiency, and long-term partnershipsWe are a facility management company with over 15 years of experience delivering reliable, high-quality services. Our team provides prompt, on-time responses to a wide range of store and facility needs, ensuring smooth operations for our clients. Trusted by numerous businesses, we are committed to excellence, efficiency, and long-term partnerships

Job Description Job Title: Counter Sales Associate FLSA Status: Non-Exempt: Some overtime may be required Reports To: Branch Manager Position Summary: Contributes to branch sales growth and profitability by providing prompt, friendly and professional service to Johnstone customers in-person, over the phone and by electronic communications. This position has no formal supervisory responsibilities. Essential Job Results and Responsibilities: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Customer Service Results and Responsibilities • Answers incoming telephone calls and emails and greets customers who walk in the store. Handles multiple customers and customer requests simultaneously while maintaining a friendly and professional manner., • Assists customers in making product selections by asking questions and actively listening to identify customer needs. Assists with system or product troubleshooting and answering technical questions. Identifies alternate or substitute products to meet customer needs., • Assists customers with the use of Johnstone Supply e-commerce and mobile application questions., • Researches and sources products for customers using a variety of tools, including point-of-sale computer system, catalogs, websites, JXI, and industry and store contacts., • Enters sales orders into point-of-sale computer system for invoicing or cash payments. Processes customer returns and warranties following company guidelines., • Follows up promptly on all customer requests for information, quotes, alternative parts and delivery dates. Proactively communicates with customers about any expected delays or issues with their order., • Develops good working relationships and rapport with customers. Greets regular customers by name., • Maintains the highest standards in cleanliness and appearance of the showroom through stocking shelves, housekeeping, creating displays, etc., • Resolves customer complaints and disputes in a timely, professional manner that balances customer requests with business needs., • Follows company pricing and credit guidelines. Sales Results and Responsibilities • Prepares and issues sales quotes following company guidelines. Follows up on quotes to secure sales., • Educates customers/prospects regarding the variety of products available for sale and the benefits of shopping at Johnstone Supply., • Increases customer satisfaction and store profitability by proactively recommending additional items a customer might need and promotions that might interest them., • Uncovers and communicates sales lead information to outside sales staff and management., • Promotes surplus, sale, discounted and obsolete inventory to customers in order to maintain proper inventory levels. Communicates unexpected increases or decreases in product demand and inventory to purchasing or management. General Results Responsibilities • Maintains knowledge of new and existing products and inventory by participating in training, studying Johnstone and industry catalogs and web sites, and seeking knowledge from experienced staff members and factory representatives., • Assists in receiving, shipping and general warehouse duties., • Is organized and orderly, and capable of maintaining appropriate records., • Completes all transactions and necessary paperwork accurately and in a timely manner., • May represent Johnstone Supply at trade associations, events, and local chapters. Johnstone Supply believes that each employee’s contribution should not be limited by the assigned responsibilities. Therefore, it is expected that each employee will offer his/her services wherever and whenever necessary to ensure the success of our endeavors. Qualifications: To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and Experience: • Required: High School Diploma or G.E.D and minimum of two years related experience and/or training in the HVAC/R industry; OR equivalent combination of education and experience., • Preferred: The above plus 2 years of experience as a Sales Associate in the HVAC/R or similar industry. Job-Specific Knowledge, Skills & Abilities • Ability to provide consistent, professional customer service., • Ability to multi-task and maintain focus while prioritizing the needs of several customers at once., • Problem-solving skills: listening to, interpreting, and meeting the needs of others; diagnosing and rectifying problems that will often require attention to detail., • Demonstrated understanding and application of effective sales strategies and techniques., • Skill in building long-term customer relationships., • Ability to maintain a positive, courteous, and friendly demeanor., • General knowledge of HVAC/R products, concepts and the industry as a whole., • Skill in proactively communicating (both verbal and written) to establish mutual respect and understanding., • Math skills, including the ability to: add, subtract, multiply, divide; and calculate margins, discounts and percentages., • Skill in using point-of-sale computer systems to locate information and process transactions., • Skill in using web-based tools to research products and information., • Ability to work productively in teams with a wide range of people., • Ability to work independently with minimal direction., • Ability to follow written instructions and documented procedures. Expected Work Behaviors: • Keeps the company’s best interest in mind when considering or addressing issues., • Dedication to attending work and work-related functions prepared and on time., • Maintains a professional personal appearance., • Strives for continuous self-improvement and for improvement of the business with respect to sales and service quality. Physical Demands & Work Environment: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical: While performing the duties of this job, the employee is required to stand and walk on a hard surface for the majority of the workday. The employee is regularly required to reach with hands and arms, climb and balance; stoop, kneel, crouch, or crawl. The employee is frequently required to lift and carry and/or move up to 50 pounds, and occasionally required to lift up to 70 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus. The ability to speak and hear sufficiently to provide customer service is required. Store Environment: Medium to large store with shelves and bins, most work is performed with telephone, material handling equipment, computer, fax, printer, and an RF scanner. Position Type/Expected Hours of Work: This is a full-time position, and hours of work and days are Monday through Friday, 7:00 a.m. to 4:30 p.m. Occasional after hours/weekends depending on business needs. Travel: Occasional travel may be expected for this position depending on business needs. Skills Summary: Sales Aptitude Diplomacy Energetic Problem-Solving Skills Computer Skills Interpersonal & Telephone Skills Organization Time Management Math Aptitude Oral Communications Skills Reading Skills Technical Skills Written Communication Skills Ability to lift up to 70 pounds Mechanical Skills The Counter Sales Associate will maintain the strictest confidentiality on all corporate matters including, but not limited to: marketing strategies, operational structures, pricing and all subjects that may have an adverse effect on the company in the marketplace if they were made known outside the company.

Job Description Seal & Design, Inc. is a family owned company founded and located in Clarence, NY with three divisions located across the U.S. and Canada. Our product line includes gaskets, o-rings, seals, molded products, die-cut foams, and many other specific products for all kinds of sealing applications. We provide superior products to our customers across many industries, including: Automotive, Medical, Military, Aerospace, Electronics, Power Generation, Hydraulics, and HVAC. Supervises, coaches, and trains Production Associates to ensure efficient operation of machines through work planning and assignment, job set-up, material selection, tool, machine and facility maintenance and problem solving. Pay Range: $25-$30/hour · LMA - Leads, Manages and holds accountable all direct reports o Actively participates in the vetting, selection and onboarding process o Monitors efficiency and productivity to ensure expectations are met or exceeded o Provides training on equipment o Provides hands-on trouble shooting assistance o Communicates the daily schedule via daily huddles o Conducts regular coaching (formal and JIT) o Conducts performance reviews and facilitates disciplinary actions as necessary · Meets or exceeds department KPI’s o Safety, Quality, Efficiency, 5S · Facilitates continuous improvement processes to create efficiency and reduce costs · Effectively utilizes MRP software for planning and scheduling · Sets up jobs in accordance with departmental needs to ensure maximum efficiency and quality · Limits job write offs with regards to material and equipment usage · Ensures that all materials are available and ready for fabrication at the machine location · Performs first-piece inspection for all new fabrication runs, when necessary · Qualifies first-piece fabrication product and performs random quality checks as indicated by the quality specifications; has the authority to stop production when needed to correct quality problems · Completes routine auditing and inspection of shop floor activities to ensure compliance with manufacturing, customer and quality requirements · Initiates the non-conformance process; identifies preventive actions and continual improvement opportunities · Interfaces with Sales Department to understand all dimensional and customer specifications in order to resolve any issues and updates to specific requirements · Ensures that dies are maintained and stored properly; moves dies between equipment and die racks · Ensures that preventative maintenance is current and performs maintenance functions as necessary · Enforces safety policies and practices to ensure culture of health and safety; identifies safety hazards and works with management team on corrective actions Requirements · Associates degree (AA) in a technical discipline and 1-2 years related experience, or equivalent combination of education and experience · Proficiency working in a computer supported environment with business software and Microsoft office programs · Ability to read and interpret blueprints, use simple math and use basic hand-held measuring tools · Mechanical/technical aptitude · Excellent written and verbal communication skills · Strong organizational, problem-solving, and analytical skills; able to manage priorities and workflow; able to multi-task · Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm COMPANY CORE VALUES: S SELF-MOTIVATED – Take initiative and ownership; strive for excellence E ENGAGED – Leverage your individual talents to embrace the vision; practice teamwork and deliver results A ADAPTABLE – Challenge the status quo to continually improve and conquer problems and opportunities L LOYAL – Stay resolute to our cause of serving customers and our team S SINCERE – Honor commitments; respect deadlines; do what you said you would do when you said you would do it; live the golden rule JOB COMPETENCIES: · Leadership · Performance Management · Results Driven · Problem Solving · Communication Proficiency · Time Management · Critical Thinking · Planning and Organizing · Technical Capacity PHYSICAL REQUIREMENTS: · Continual use of hands; constant standing, walking, reaching, bending and lifting · Clear close vision and ability to identify and distinguish color variations · Ability to lift up to 50 lbs. Benefits • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Referral program, • Vision insurance

Senior Construction Superintendent – Healthcare Projects. Senior Construction Superintendent – Healthcare Projects. Bachelor’s degree in Construction Management preferred (or equivalent HVAC/Plumbing experience).

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact: Pearce Services is seeking skilled and motivated entry level technicians to join our team in servicing and repairing commercial generators and HVAC equipment on cell tower and telecom sites. We offer industry-leading training, competitive compensation, and opportunities for career growth in a fast-paced, essential industry. These roles are ideal for independent, self-driven professionals who thrive in hands-on environments, enjoy troubleshooting complex power and HVAC systems, and are eager to learn and grow in the Telecom industry. Candidates should be responsible, highly motivated, willing to travel, and reside in the Rochester, NY area for these local positions. Responsibilities: • Service, maintain, and repair generators, and HVAC systems at telecom and cell tower sites., • Maintain commercial package cooling systems supporting telecom equipment shelters., • Conduct preventative maintenance, inspections, load-bank testing, and performance checks., • Perform basic generator repairs, oil changes, lubrication, and fuel system maintenance., • Respond to 24/7 emergency callouts and complete accurate service reports. Core Experience: • 1+ year generator and/or HVAC service experience (technical school accepted) preferred but not required., • Preferred experience with ATS, electrical troubleshooting, and critical power systems., • EPA Universal or Type II Certification preferred: EGSA a plus., • Knowledge of FCC, FAA, EPA, OSHA standards., • Must have a valid driver's license for at least a year with an acceptable driving record and be able to pass a pre-employment drug screen and background check. Physical/Work Environment: At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • Lift 50+ lbs.; climb, bend, kneel, and stand for extended periods., • Extensive travel to telecom sites; independent field work., • Willing to work nights, weekends, holidays, and on-call rotations., • Must be able to meet the requirements of a DOT driver including physical, background and driving record., • Operate and maintain a motor vehicle safely and legally per the PEARCE Employee Handbook and insurance requirements. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$24—$38 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description Job Description: Isaac Heating & Air Conditioning is seeking an experienced Residential HVAC Sales Consultant for their Rochester, NY location. Summary: For over 75 years, Isaac Heating and Air Conditioning has worked diligently to meet the changing heating and air conditioning needs of homeowners and businesses in Upstate and Central New York. Isaac is one of the nation's largest privately held HVAC/R contractors and services over 35,000 clients a year. Creating an enjoyable experience met with anticipation results in an environment where our team, clients, and community can comfortably grow, prosper, succeed, and improve their quality of life. Isaac partners with leading HVAC and plumbing companies throughout the United States, providing the support and resources of a large national company. Lead-based sales with competitive base salary and commission. First-year potential earnings could exceed $150,000+ Responsibilities: • In-home consultation, follow-up, and sale of Residential HVAC equipment and services, • Maintain and improve sales revenue and gross margin for Residential HVAC division, • Regularly develop sales skills and stay up-to-date on industry trends and product knowledge, • Responsible for scheduling jobs, design and job orders, • Communicate scope of work with Residential Install and/or Service teams, • Ensure great client service from order to delivery and beyond Job Qualifications: • High school diploma or equivalent required, • Previous sales experience in a similar setting preferred, • Knowledge of HVAC, home, and/or energy industries preferred, • Clean driving record with valid driver's license Competencies: • Strong communication and interpersonal skills, • Knowledge of energy efficiency principles, building science, or insulation products preferred, • Proven experience in sales, energy consulting, or related field preferred, • Self-motivated with strong organizational and time management abilities What can we offer you? • Base salary of $80,000 plus 2% commission for 6 months, then will be Commission-Only at 10%, • Comprehensive medical, dental, and vision insurance, • 401k retirement plan with company match, • Paid Vacation and New York State sick time The anticipated first-year earnings for this position is $150,000 or more. The base salary is $80,000 with 2% commission on all sales for your first 6 months. After 6 months, you will then switch to commission-only at 10%. This is the range of the base pay only, it does not include other components that make up the total compensation package of the position. If offered a position, your total compensation package will be determined by experience, location, skills, and/or education which may result in a total compensation package that falls outside of the provided range. This employer participates in E-Verify to verify the employment eligibility of all new hires. E-Verify is a federal program that compares information from Form I-9 to government records to confirm employment eligibility. Isaac Heating & Air Conditioning (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy, or maternity, protected veteran status, or any other status protected by applicable national, federal, state or location.

Job DescriptionJob Description: Isaac Heating & Air Conditioning is seeking an Insulation Sales Consultant for their Rochester, NY location. The purpose of this role is to evaluate customer homes by utilizing provided energy assessment tools, educate homeowners on your findings, and sell products/solutions based on the results of the energy assessment, focusing on improving/replacing insulation to increase energy efficiency. The ideal candidate will be customer service orientated and interested in consultation sales. This position includes a base salary with commission. First-year potential earnings can exceed $100k+ if sales goals are achieved. Summary: For over 75 years, Isaac Heating and Air Conditioning has worked diligently to meet the changing heating and air conditioning needs of homeowners and businesses in Upstate and Central New York. Isaac is one of the nation's largest privately held HVAC/R contractors and services over 35,000 clients a year. Creating an enjoyable experience met with anticipation results in an environment where our team, clients, and community can comfortably grow, prosper, succeed, and improve their quality of life. Isaac partners with leading HVAC and plumbing companies throughout the United States, providing the support and resources of a large national company. Responsibilities: • Generate leads through referrals and inbound inquiries, • Conduct in-home energy assessments, including inspecting insulation and air sealing, and other efficiency factors, • Provide homeowners with clear, customized recommendations and quotes for insulation or other energy-saving improvements, • Educate homeowners on the benefits of energy efficiency and available rebate or incentive programs, • Close sales through consultative, solution-oriented selling, • Maintain sales projections, reaching sales goals set by your manager, • Coordinate with installation teams to ensure timely and accurate project completion, • Maintain detailed records of customer interactions and pipeline activity in ServiceTitan software, • Follow up with customers to ensure satisfaction and secure referrals, • Enter energy assessment information in energy modeling program as necessary, • Stay up to date on energy efficiency trends, utility rebate programs, and local building codes, • Engineer, order, and schedule the purchased home improvements, • Perform other related duties as assigned to ensure the efficient operation of the department Job Qualifications: • High school diploma or equivalent required, some college preferred, • Secure and maintain BPI Certification, • Experience/knowledge of home and/or energy industry preferred, • Valid driver’s license/clean driving record Competencies: • Strong communication and interpersonal skills, • Knowledge of energy efficiency principles, building science, or insulation products preferred, • Proven experience in sales, energy consulting, or a related field, • Self-motivated with strong organizational and time management abilities What can we offer you? • Base salary of $31,200 plus 8% commission on all sales, • All major energy assessment tools, • Laptop computer and cell phone, • Company vehicle, • Comprehensive Medical, Dental, and Vision insurance, • Paid vacation and sick time, • 401k retirement plan with company match The starting yearly base salary range for this position is $31,200 plus 8% commission on all sales, and the first-year earnings can exceed $100,000+. This is the range of the base pay only, it does not include other components that make up the total compensation package of the position. If offered a position, your total compensation package will be determined by experience, location, skills, and/or education which may result in a total compensation package that falls outside of the provided range. This employer participates in E-Verify to verify the employment eligibility of all new hires. E-Verify is a federal program that compares information from Form I-9 to government records to confirm employment eligibility. Isaac Heating & Air Conditioning (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy, or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need while being able to focus on individual growth and improvement. We foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, team spirit and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking a Senior Architectural Designer with strong design, technical, and creative skills to provide architectural design with a focus on industrial and aviation facilities. The ideal candidate will have 4+ years of design experience and a professional degree in architecture from an accredited program. In this role, you will work under the direction of a project architect and/or project manager and will often coordinate technical design aspects with a multi-disciplinary team of designers and engineers as well as prepare presentation and design drawings and details. Key responsibilities include: Design & Technical Execution • Develop and coordinate architectural design solutions from concept through construction., • Apply advanced design knowledge to develop creative, functional, and sustainable solutions with the client’s goals and budget in mind. Practice Management • Collaborate with a team of design professionals to win and successfully execute projects., • Demonstrate strong ethics, teamwork, and client relationship management. Project Management • Deliver projects that meet contractual obligations, schedule, and financial goals., • Ensure project quality and client satisfaction throughout all phases. Programming & Analysis (Pre-Design) • Conduct on-site field work within active industrial and aviation facilities., • Utilize Autodesk Revit and 3-D point cloud scanning technology to develop accurate BIM models., • Research and understand the impacts of building codes, accessibility requirements, client-driven standards such as FM Global compliance., • Develop recommendations on project feasibility under the guidance of a licensed Architect. Project Planning & Design (Schematic Design) • Lay out building designs, review codes and regulations, and coordinate plans with consultants and engineers, working closely with a project architect., • Communicate design concepts clearly to clients and stakeholders. Project Development & Documentation • Prepare and coordinate detailed construction documents, including plans, details, schedules, and specifications, for permitting and bidding., • Coordinate with, and provide architectural support for, mechanical process, plumbing, HVAC, electrical, and structural engineering work. Construction Administration & Evaluation • Participate in on-site construction administration, including meetings with clients, contractors, and building officials., • Support punch lists, RFIs, and project closeout activities under the supervision of an Architect. Skills/Education/Experience • 4+ years of substantial experience developing architectural details and providing planning and design support during design development., • Experience gained through full-time employment under the supervision of a licensed Architect., • Professional degree in Architecture from an accredited program (Bachelor of Architecture, or Master of Architecture). Estimated Compensation Range and Benefits $80,000 - $95,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Responsibilities: Install, service, and maintain residential and commercial elevators, platform lifts, and other accessibility equipment Diagnose mechanical, electrical, and hydraulic issues using proper tools and testing equipment Perform routine inspections and preventative maitenance Inspect and

We're currently looking for individuals across the country to take part in remote paid market research, including online focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing y