Offres inspector à Piscataway, New JerseyCréer des alertes d'emploi

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: • To verify property occupancy. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities • Most common type of inspection should only take 5-6 minutes., • Complete the inspection within 4 days after it is assigned., • Report general property conditions and make a determination of occupancy based on industry standards., • Take 9+ photos of the property with brief comments., • Complete a short form in an app., • Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory.Requirements (to be considered you must have the following):, • Computer with an internet connection, • Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas), • Smartphone (Android or iPhone), • Printer Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR chMOi5pwAc

Job DescriptionQuality Inspector Needed For Leading Manufacturing Company This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $25 - $35 per hour A bit about us: My client is a leading manufacturing company and is looking to add multiple Quality Inspector's to their team. This position involves rigorous inspection processes, collaboration with various teams, and a commitment to continuous improvement to uphold the integrity of our products. Why join us? Compensation Up To $35/hr + OT • Great Company Benefits, • Flexible Working Schedule, • Room For Growth Job Details Key Responsibilities: • Thoroughly examine incoming raw materials to verify compliance with established specifications and quality standards., • Document and communicate material discrepancies to suppliers and internal stakeholders to facilitate timely resolutions., • Conduct systematic and detailed inspections at various stages of the metal stamping process, including during setup and ongoing production runs., • Utilize precision measurement tools, such as calipers, micrometers, and coordinate measuring machines (CMM), to assess dimensions, tolerances, and overall component integrity., • Execute comprehensive evaluations on finished products, ensuring conformity to engineering specifications, customer requirements, and regulatory standards., • Prepare and maintain detailed inspection reports, highlighting any non-conformities and recommending corrective actions as necessary., • Perform functional, durability, and performance testing on products, if applicable, to guarantee they meet operational requirements. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job DescriptionWork for a Somerset County, NJ area company that produces electro-mechanical power connection products. Quality Inspector: Key Responsibilities: Qualifications: • Education: High school diploma or equivalent; technical or vocational training in quality inspection or a related field is preferred., • Experience: 2-4 years of experience in quality inspection within a manufacturing or assembly environment, preferably with electric products. Work Environment: • Manufacturing assembly floor environment with exposure to electrical products, machinery, and moderate noise levels., • Must be able to stand for extended periods and occasionally lift objects up to 25 lbs. #ZRSS Listed: $19-$22/hr

Job Description Spark Car Wash is a high growth, institutionally backed express exterior car wash company serving the Northeast region. Our mission is to make car washing an energizing experience for everyone. We are focused on becoming the premier brand in the market by providing consistent excellence to our customers and an enriching environment to our employees. Spark is in the process of launching multiple new locations with a vision of becoming the largest chain in the market by 2027. Our team is ambitious, and we strive to give every car a clean owner and every employee a fulfilling career. You would be joining an innovative brand with lots of potential for growth. Your role is to greet our customers in a kind and professional manner that adds a smile to their day and provides a safe, fast, friendly experience while ensuring a clean, well-maintained facility. In addition, you will receive cross training in other duties and procedures so that you can grow your skill set and assist in other roles. Car Wash Associates are paid hourly plus commission on their membership sales when working at the XPT station. What you will be doing: • Be the friendly face of Spark, offering customers a smile and prompt service, • Advise our guests on their purchases and let them know about the amazing deals and free amenities that we offer. Car wash associates are compensated for each membership sold, • Identify opportunities to improve our customer service – we love hearing new ideas, • Control traffic flow and pedestrian safety, ensuring correct vehicle processing is followed, • Take charge of keeping the car wash, the grounds, and the restrooms clean, tidy and well-stocked. You will be a mean mopper, a swift trash gatherer, a whiz at unclogging vacuums and a pro at cleaning the pit to ensure everything runs smoothly., • Be the eagle-eyed vehicle inspector at the tunnel entry, checking cars are entering safely, • and removing excess dirt and debris, • The Car Wash Associate position is a significant role at Spark – you’re the face of our brand. You’ll be good with people and have a real sense of pride in your work, • Spark is a fast-paced, dynamic environment – we are looking for someone who can follow instructions but also work independently with great time management skills, • We are looking for a candidate who loves interacting with people, • We are looking for a candidate with great attention to detail – someone who can spot a problem quickly, • Because we are growing, we are interested in candidates who also love to be curious, to learn, and to grow Physical Requirements/Working Conditions: • The position requires the ability to perform physical activities that require considerable use of your hands, arms and legs and moving your whole body, such as walking, standing, bending, stooping, and handling of tools/materials as well as lifting up to 50 lbs, • The position requires the ability to see details at close range (within a few feet of the observer), • Competitive salary with performance-based incentives, • Starting salary $15.86, • Comprehensive health, dental, and vision insurance, • Retirement savings plan with company match, • Paid time off and holidays, • Free Car Washes

Job Description Construction Materials Field Tech/Inspector HURRY! $1000 SIGN-ON BONUS* $$$ for all new hires! We offer a starting rate of $25.00/hr. with no experience. Already a seasoned technician? We offer a start up to $30/hr. or more based on experience. WHO IS HILLIS-CARNES? Hillis-Carnes Engineering Associates (HCEA) is a multi-disciplined ENR Top 500 engineering firm with 20 offices in the mid-Atlantic. We have a demonstrated history of success for the past 35 years. We are 100% employee-owned ESOP, and our history of success can be attributed to our motivational employee owner. We believe in fostering teamwork, rewarding ambition, and providing opportunities for professional advancement. WHY HILLIS-CARNES? Through our ESOP (Employee Stock Option Program), you receive ownership stock in the company! • $2500 SIGN-ON BONUS* $$$ for all new hires!, • An additional bonus after one year of service!, • Competitive pay., • Paid on-the-job training., • Generous Paid Time Off/Holidays/Floater Holidays., • Paid education expenses for associated certifications., • Company cell or reimbursement for use of personal phone, • Employee Self-Service Portal, • Employee Referral Bonus program up to $5,000, • Free HCEA apparel and work boots, • Personal Protective Equipment and safety gear, • Paid mileage, • Medical (w/Health Savings Account Options) Plans, • Dental and Vision Plans, • 100% Employer-Paid Benefits (Long-Term Disability, Basic Life), • Voluntary Short-Term Disability, • Voluntary Life, • Employee Assistance Program, • 401k w/ Company Match As a Construction Materials Testing Technician in the South Plainfield, NJ office, you will directly play an integral role in the success of our organization. As part of this team, you will work independently and in collaboration with our knowledgeable, dynamic staff and on a wide variety of land development and construction projects. The key responsibilities will include: • Field observations at jobsites in the region., • Sampling and testing of construction materials., • Preparing accurate daily logs that outline your inspections and results of the test you performed on construction materials. The construction materials you will be working with include soil, aggregates, concrete, grout, masonry, asphalt, and structural steel., • Reliable vehicle for field work, valid driver's license, and satisfactory driving record., • Must meet additional pre-employment criteria., • Ability to lift and/or move up to 60-80 pounds (soil and concrete samples, nuclear gauges, other equipment), • Ability to work in all outdoor climates and mobility over various terrain., • Attention to detail and quality, while adhering to all safety requirements., • Effective verbal and written communication skills required., • Use of company provided tablet and working knowledge of MS Office programs., • Ability to perform basic math and use measurement tools. EE/Minorities and Women encouraged to apply. *$500 bonus paid after 90 days of employment: additional $500 bonus after successful completion of six months employment. Job Posted by ApplicantPro

Job Description ARMStrong Insurance Services is the leading and most trusted name in the world of debt recovery and financial solutions. With a track record of excellence and reliability, we have proudly served businesses across various industries for decades, ensuring efficient B2B collections and tailored debt recovery solutions. As the parent company, ARMStrong is proud to own and operate Brown & Joseph, Paragon, SubroIQ, and NEIS each a powerhouse in their own right, providing specialized expertise in debt management and financial services. NEIS is currently looking for Loss Control Field Inspectors to join our team!!! Loss Control Field Inspectors conduct insurance loss control inspections on either commercial or residential dwellings. This is a Part-Time/Occasional Job Hours can vary from week to week but you make your own schedule**. Job Responsibilities: • Conduct physical inspections on either commercial or residential properties., • Apply manual rules and company standards to find possible risks to reduce the chance of accidents, • Prepare a schedule to maximize optimal use of time and to ensure time service is met, • Correspond with insured via phone, email and text message as necessary to set up appointments, • Complete a physical loss control survey to identify any current issues or hazards, • After physical inspection is completed, prepare required reports to which includes multiple pictures, • Competent use of digital camera, word processing and e-mail, • Valid driver’s license and satisfactory driving record (based on NEIS guidelines), • Must live within 30-mile radius of territory, • Job will be based from home with required travel to each inspection location within your assigned territory, • Compensation is roughly $50 and up per inspection (depends on the job and location), • On the job training, • Base pay - paid weekly, • Mileage Reimbursement - paid weekly, • Production pay - paid weeklyWe look forward to you joining the team! ARMStrong Insurance Services is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Powered by JazzHR Be1mWPllhM

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Senior Construction Inspector for a NJDOT / NJTA project in Central NJ. Naik is a New York-New Jersey engineering services firm which specializes in engineering design, field inspection, and Project Management/Construction Management, primarily in the transportation infrastructure industry. Responsibilities • Monitors contractor operations and verifying conformance with project plans and specifications, • Serves as the on-site highway inspector for construction work performed by the contractor and subcontractors., • Interacts with the construction contractor’s site supervision on field activities to ensure compliance with the construction contract requirements, • Prepares daily reports, correspondence, change orders, periodic payment estimates, and quantity computations, • Observes details of work performed by others, documenting results; obtaining photographic documentation of work performed, • Confirms compliance with technical documents and industry-specific standards and codes, • Reviews and downloads field data into laptop computer and transfer to company server, • Discusses projects with project team on a daily basis, • Makes accurate judgment-calls on a variety of construction field activities, • Performs other like duties, as assigned Qualifications • Bachelor’s degree in Civil engineering is preferred, • NICET Level III in Highway Construction certification is required, • ACI, TCC, CCTC, and NJSAT certifications required, • 5+ years of experience in highway construction inspection, • Experience with NJDOT / NJTA projects required, • OSHA 10-hour safety course is required, • Excellent written and verbal communication skills, • Good time-management skills, • Ability to perform under pressure, • Good skills in Microsoft Excel, Word and Powerpoint, • A strong attention to detail is necessary. BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job Description Job Description Date 06/2025 Location 1300 Airport Road, North Brunswick NJ 08902 Title Associate, In-Process Quality Assurance MFG/PKG Department Quality Assurance Operation Support Reports to Quality Assurance Manager/ VP of QA FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The IPQA performs line inspection as part of the cGMP, SOPs, and policy compliance requirements as per CFR part 111. Performs In-process quality testing in manufacturing and/or packaging areas according to prescribed timelines and accurately captures test results in batch records. The Inspector performs calibrations & measurements on raw materials, bulk products, finished products and packaging components as required in batch records and SOP’s. This position reports to the QA Manager and is a key member of the Quality Assurance group. The IPQA Associate is a highly organized self-starter who can work independently, demonstrates a positive attitude, and a bias for action. Areas of Responsibility IPQA – Level 1: To support In-process quality assurance activities by performing routine checks and verifications during manufacturing and/or packaging of nutraceutical products. This role ensures that all processes comply with applicable GMP, SOPs, and regulatory requirements. Key Responsibilities: ???? Manufacturing Support • Perform line clearance before starting blending, granulation, compression, encapsulation, coating processes., • Perform In-process checks:, • Blend uniformity sampling, • Tablet/capsule weight variation, • Hardness, friability, and disintegration tests etc as applicable, • Verify equipment cleaning and area hygiene as per SOP., • Ensure line clearance before packaging activities., • Perform In-process checks:, • Batch number and expiry date printing, • Label application and carton sealing, • Primary and secondary packaging integrity etc as applicable, • Record observations in IPQA checklists, logbooks, and batch records., • Maintain GMP documentation in real-time (legible and error-free)., • Adhere to company GMP, SOP, and Hygiene policies., • Use PPE appropriately., • Support during internal/external audits by providing necessary records., • Cleans up work following the completion of a shift., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned, • Other Responsibilities Including Safety: IPQA – Level 2: To independently perform and document In-process quality assurance activities at all critical stages of manufacturing and packaging of nutraceutical products, ensuring compliance with GMP, SOPs, and regulatory requirements. Key Responsibilities: ???? Manufacturing Stage (Granulation, Blending, Compression, Encapsulation, Coating ) • Carry out and document line clearance activities before starting each manufacturing batch., • Conduct in-process checks independently:, • Blend uniformity sampling, • Tablet/capsule weight variation, • Hardness, friability, thickness, and disintegration, • In-process controls as per BMR specifications, • Verify equipment cleanliness status, calibration, and logbook entries., • Conduct line clearance for primary and secondary packaging (bottles, strips, blister, cartons)., • Perform and document:, • Batch coding verification (batch no., Mfg/Exp date), • Packaging material correctness (labels, leaflets, cartons), • Sealing integrity checks (blisters, induction seals), • Online rejection bin and reconciliation checks, • Fill Batch Manufacturing Records (BMR) and Batch Packaging Records (BPR) in real-time., • Record IPQA observations and results as per SOPs ( legible and error free)., • Initiate and report deviations, OOS/OOT, and non-conformities to QA Supervisor/ Manager., • Ensure compliance with GMP, GLP, and data integrity principles., • Follow gowning protocols, hygiene, and safety measures in production areas., • Assist during internal audits and regulatory inspections by providing accurate documentation and data., • Cleans up work following the completion of a shift., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned, • Other Responsibilities Including Safety: IPQA – Level 3: To lead and monitor In-process QA activities during nutraceutical manufacturing and packaging operations. Ensure compliance with GMP, regulatory standards, and internal SOPs by supervising IPQA teams, reviewing records, and addressing quality deviations. Key Responsibilities: ????IPQA Oversight – Manufacturing & Packaging • Supervise and verify line clearance activities across all manufacturing and packaging areas., • Ensure compliance with critical process parameters (CPPs) and critical quality attributes (CQAs)., • Review and approval:, • In-process checks: weight variation, hardness, friability, disintegration etc as applicable, • Environmental monitoring records, • Equipment and area cleaning records, • Review and verify completed Batch Manufacturing Records (BMR) and Batch Packaging Records (BPR)., • Cross-check reconciliation of raw materials and printed packaging materials., • Investigate and document process deviations, non-conformances, and OOS/OOT incidents., • Lead root cause analysis (RCA) and implement Corrective and Preventive Actions (CAPA)., • Ensure readiness for internal, external, and regulatory audits (FSSAI, WHO-GMP, USFDA, etc.)., • Conduct routine GMP audits, spot checks, and area inspections., • Guide and mentor IPQA Level 1 and Level 2 personnel., • Allocate daily QA responsibilities and monitor adherence to QA procedures., • Conduct on-the-job training for new team members, • Cleans up work following the completion of a shift., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned, • Other Responsibilities Including Safety:, • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned, • Other Responsibilities Including Safety:, • N/A Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: IPQA – Level 1: • 0–1 year (Freshers with training or internship in QA preferred), • Or equivalent combination of education and experience., • Minimum of 3+ years of experience in a QA Inspector within a nutritional’s supplements, food, consumer products or pharmaceutical company., • Or equivalent combination of education and experience., • 3–5 years in IPQA or related QA roles in nutraceuticals, pharmaceuticals, or food manufacturing. Or equivalent combination of education and experience., • N/A Skills & Ability IPQA – Level 1: • Basic understanding of GMP, nutraceutical processes, and QA principles., • Good observation and attention to detail., • Willingness to work in production areas (shifts, growing zones)., • Ability to follow instructions and standard procedures accurately., • Basic proficiency in English and documentation practices. IPQA – Level 2: • Strong knowledge of IPQA functions, SOPs, and process flow in nutraceuticals., • Understanding of basic analytical parameters (weight variation, friability, etc.)., • Good documentation and observational skills., • Proficient in using basic lab and QA tools (weighing balances, disintegration testers)., • Familiar with regulatory guidelines (FSSAI, WHO-GMP, USFDA, HACCP). IPQA – Level 3: • In-depth understanding of nutraceutical manufacturing processes and regulatory compliance., • Proficient in QA documentation, process audits, and deviation handling., • Strong analytical and decision-making skills., • Familiar with QMS tools, GMP documentation, and data integrity principles., • Working knowledge of SOP writing, change control, and risk assessment. Physical Requirements (lifting, etc.): • Ability to lift up to 35 lbs.; occasionally lift and move up to 50 pounds., • Must stand and walk on production floor a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool., • Work is regularly performed inside a manufacturing and packaging environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. First shift$24.00 to $30.50Second Shift$24.00 to $31.00 3rd shift 11.00 PM to 7:30 PM

Job Description Human Resources Manager Edison Office Purpose: The Human Resources Manager promotes human resources initiatives and values by planning and managing, developing, and updating human resources programs, policies, and procedures. This position will ensure a positive human resources presence and partnership throughout the organization. Job Description: • Overall HR strategy includes policy development, processes and best practices, business and organizational planning, management reporting, training, performance management/reviews, counseling and coaching and improvement planning., • Overall management of HR systems and current databases, • Direct supervision of the recruiting, hiring, and onboarding processes. Conduct new hire orientation., • Work with the management team to develop and implement organizational strategies, policies, and best practices., • Ensure legal compliance. Monitor and implement applicable HR federal and state requirements., • Maintain records and represent the organization at hearings as needed., • Provide support to all staff on HR laws, policies, processes related to staff's job duties., • Provide Change of Status and other forms to payroll and benefits, • Create and update job descriptions as necessary., • Maintain the preparation and monitoring of the performance evaluation program. Provide advice and assistance to all staff., • Coach all staff on employee relations and performance related issues, conduct investigations, determine, and implement plan of action as necessary., • Maintain HR, and Agency record keeping compliance., • Manage work related injuries and Worker Compensation process, Unemployment, State Disability and Family Medical Leave Act (FMLA) leaves of absence, Employment and Wage verifications., • Track the Office of Inspector General's (OIG), Occupational Safety and health Administration (OSHA) and Affirmative Action reporting., • Qualifications:, • Bachelor's degree in human resources, Organizational Management, or related field preferred, • At least 5 years in HR leadership position. Current knowledge of NJ HR laws and regulations, • Critical thinking and reasoning ability., • Experience in staff coaching and training., • Strong communication and interpersonal skills required., • Ability to work professionally, cooperatively, and positively with all levels of staff., • Exhibit technical competence & PC skills.

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Construction Inspector for a NJDOT / NJTA project in Central NJ. Naik is a New York-New Jersey engineering services firm which specializes in engineering design, field inspection, and Project Management/Construction Management, primarily in the transportation infrastructure industry. Responsibilities • Monitors contractor operations and verifying conformance with project plans and specifications, • Serves as the on-site highway inspector for construction work performed by the contractor and subcontractors., • Interacts with the construction contractor’s site supervision on field activities to ensure compliance with the construction contract requirements, • Prepares daily reports, correspondence, change orders, periodic payment estimates, and quantity computations, • Observes details of work performed by others, documenting results; obtaining photographic documentation of work performed, • Confirms compliance with technical documents and industry-specific standards and codes, • Reviews and downloads field data into laptop computer and transfer to company server, • Discusses projects with project team on a daily basis, • Makes accurate judgment-calls on a variety of construction field activities, • Performs other like duties, as assigned Qualifications • Bachelor’s degree in Civil engineering is preferred, • NICET Level II in Highway Construction certification is required, • ACI, TCC, CCTC, and NJSAT certifications required, • 5+ years of experience in highway construction inspection, • Experience with NJDOT / NJTA projects required, • OSHA 10-hour safety course is required, • Excellent written and verbal communication skills, • Good time-management skills, • Ability to perform under pressure, • Good skills in Microsoft Excel, Word and Powerpoint, • A strong attention to detail is necessary. BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job Description Job Description Date 06/2025 Location 1300 Airport Road, North Brunswick NJ 08902 Title Associate, In-Process Quality Assurance MFG/PKG Department Quality Assurance Operation Support Reports to Quality Assurance Manager/ VP of QA FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The IPQA performs line inspection as part of the cGMP, SOPs, and policy compliance requirements as per CFR part 111. Performs In-process quality testing in manufacturing and/or packaging areas according to prescribed timelines and accurately captures test results in batch records. The Inspector performs calibrations & measurements on raw materials, bulk products, finished products and packaging components as required in batch records and SOP’s. This position reports to the QA Manager and is a key member of the Quality Assurance group. The IPQA Associate is a highly organized self-starter who can work independently, demonstrates a positive attitude, and a bias for action. Areas of Responsibility IPQA – Level 1: To support In-process quality assurance activities by performing routine checks and verifications during manufacturing and/or packaging of nutraceutical products. This role ensures that all processes comply with applicable GMP, SOPs, and regulatory requirements. Key Responsibilities: ???? Manufacturing Support • Perform line clearance before starting blending, granulation, compression, encapsulation, coating processes., • Perform In-process checks:, • Blend uniformity sampling, • Tablet/capsule weight variation, • Hardness, friability, and disintegration tests etc as applicable, • Verify equipment cleaning and area hygiene as per SOP., • Ensure line clearance before packaging activities., • Perform In-process checks:, • Batch number and expiry date printing, • Label application and carton sealing, • Primary and secondary packaging integrity etc as applicable, • Record observations in IPQA checklists, logbooks, and batch records., • Maintain GMP documentation in real-time (legible and error-free)., • Adhere to company GMP, SOP, and Hygiene policies., • Use PPE appropriately., • Support during internal/external audits by providing necessary records., • Cleans up work following the completion of a shift., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned, • Other Responsibilities Including Safety: IPQA – Level 2: To independently perform and document In-process quality assurance activities at all critical stages of manufacturing and packaging of nutraceutical products, ensuring compliance with GMP, SOPs, and regulatory requirements. Key Responsibilities: ???? Manufacturing Stage (Granulation, Blending, Compression, Encapsulation, Coating ) • Carry out and document line clearance activities before starting each manufacturing batch., • Conduct in-process checks independently:, • Blend uniformity sampling, • Tablet/capsule weight variation, • Hardness, friability, thickness, and disintegration, • In-process controls as per BMR specifications, • Verify equipment cleanliness status, calibration, and logbook entries., • Conduct line clearance for primary and secondary packaging (bottles, strips, blister, cartons)., • Perform and document:, • Batch coding verification (batch no., Mfg/Exp date), • Packaging material correctness (labels, leaflets, cartons), • Sealing integrity checks (blisters, induction seals), • Online rejection bin and reconciliation checks, • Fill Batch Manufacturing Records (BMR) and Batch Packaging Records (BPR) in real-time., • Record IPQA observations and results as per SOPs ( legible and error free)., • Initiate and report deviations, OOS/OOT, and non-conformities to QA Supervisor/ Manager., • Ensure compliance with GMP, GLP, and data integrity principles., • Follow gowning protocols, hygiene, and safety measures in production areas., • Assist during internal audits and regulatory inspections by providing accurate documentation and data., • Cleans up work following the completion of a shift., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned, • Other Responsibilities Including Safety: IPQA – Level 3: To lead and monitor In-process QA activities during nutraceutical manufacturing and packaging operations. Ensure compliance with GMP, regulatory standards, and internal SOPs by supervising IPQA teams, reviewing records, and addressing quality deviations. Key Responsibilities: ????IPQA Oversight – Manufacturing & Packaging • Supervise and verify line clearance activities across all manufacturing and packaging areas., • Ensure compliance with critical process parameters (CPPs) and critical quality attributes (CQAs)., • Review and approval:, • In-process checks: weight variation, hardness, friability, disintegration etc as applicable, • Environmental monitoring records, • Equipment and area cleaning records, • Review and verify completed Batch Manufacturing Records (BMR) and Batch Packaging Records (BPR)., • Cross-check reconciliation of raw materials and printed packaging materials., • Investigate and document process deviations, non-conformances, and OOS/OOT incidents., • Lead root cause analysis (RCA) and implement Corrective and Preventive Actions (CAPA)., • Ensure readiness for internal, external, and regulatory audits (FSSAI, WHO-GMP, USFDA, etc.)., • Conduct routine GMP audits, spot checks, and area inspections., • Guide and mentor IPQA Level 1 and Level 2 personnel., • Allocate daily QA responsibilities and monitor adherence to QA procedures., • Conduct on-the-job training for new team members, • Cleans up work following the completion of a shift., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned, • Other Responsibilities Including Safety:, • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned, • Other Responsibilities Including Safety:, • N/A Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: IPQA – Level 1: • 0–1 year (Freshers with training or internship in QA preferred), • Or equivalent combination of education and experience., • High School diploma is required; BS degree in a life science discipline (e.g., Chemistry, Microbiology, Biochemistry) a plus. IPQA – Level 2: • Minimum of 3+ years of experience in a QA Inspector within a nutritional’s supplements, food, consumer products or pharmaceutical company., • Or equivalent combination of education and experience., • BS degree in a life science discipline (e.g., Chemistry, Microbiology, Biochemistry) a plus. IPQA – Level 3: • 3–5 years in IPQA or related QA roles in nutraceuticals, pharmaceuticals, or food manufacturing. Or equivalent combination of education and experience. IPQA – Level 1: • Basic understanding of GMP, nutraceutical processes, and QA principles., • Good observation and attention to detail., • Willingness to work in production areas (shifts, growing zones)., • Ability to follow instructions and standard procedures accurately., • Basic proficiency in English and documentation practices. IPQA – Level 2: • Strong knowledge of IPQA functions, SOPs, and process flow in nutraceuticals., • Understanding of basic analytical parameters (weight variation, friability, etc.)., • Good documentation and observational skills., • Proficient in using basic lab and QA tools (weighing balances, disintegration testers)., • Familiar with regulatory guidelines (FSSAI, WHO-GMP, USFDA, HACCP). IPQA – Level 3: • In-depth understanding of nutraceutical manufacturing processes and regulatory compliance., • Proficient in QA documentation, process audits, and deviation handling., • Strong analytical and decision-making skills., • Familiar with QMS tools, GMP documentation, and data integrity principles., • Working knowledge of SOP writing, change control, and risk assessment. Physical Requirements (lifting, etc.): • Ability to lift up to 35 lbs.; occasionally lift and move up to 50 pounds., • Must stand and walk on production floor a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool., • Work is regularly performed inside a manufacturing and packaging environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. shift schedule 1st shift: 7:00 AM - 3:30 PM, 2nd shift: 3:00 PM - 11:30 PM and 3rd shift: 11:00 PM - 7:30 AM

Job DescriptionDescription: Performance Systems Development (PSD) is seeking a Field Inspector to ensure the quality of energy efficiency projects by conducting pre- and post-installation inspections, verifying that measures are installed correctly, operational, and consistent with program requirements. This role is field-based, customer-facing, and essential to maintaining program integrity and customer satisfaction. As a Field Inspector you will: · Conduct pre- and post-installation inspections to verify quality, safety, and/or compliance. · Collect diagnostic test data and document results in clear, timely reports. · Identify and escalate health or safety concerns while on site. · Provide guidance and technical support to contractors to ensure successful project outcomes. · Represent the program professionally with customers, contractors, and partners in the field. · Reside in, and travel around, the state of New Jersey This position is within the reporting structure of the Program Manager on the Delivery team and plays a key role in helping PSD ensure program integrity, deliver verified energy savings, and maintain customer confidence through high-quality field inspections. About PSD Performance Systems Development is a national leader in building science and energy efficiency. Since our founding 25 years ago, we've grown to over 100 employees who are passionate about delivering creative and effective solutions that drive change in how buildings use energy. We focus on three core areas: 1. High-impact energy efficiency programs that improve building performance., 2. Workforce development and industry training to upskill professionals., 3. Innovative software solutions to manage and analyze energy efficiency data. Our work advances energy policies, supports contractors, and drives sustainability efforts across the industry. What You Bring · Attention to detail and commitment to quality, safety, and customer satisfaction. · Experience in construction, building systems, inspections, or energy efficiency. · Ability to work independently in the field, manage multiple assignments, and communicate clearly with contractors and customers. Additional Details • Physical Demands: Frequent computer use requiring periods of sitting and close audio-visual concentration. Be able to lift diagnostic testing equipment (blower door, etc., up to 50 lbs)., • Work Environment: Field work is performed both outside and inside of buildings in varying weather conditions. Field work will include accessing attics, basements, crawlspaces, and other locations associated within the built environment, • Salary: Competitive, commensurate with education, qualifications, and experience. Interested candidates should apply directly. PSD is not accepting applications from recruiters, 3rd party agencies, or outsourcing firms. Learn more about us at Diversity & Inclusion PSD strives to create a diverse and inclusive workplace. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status or any other status protected by law. Performance Systems Development is an Equal Opportunity Employer Requirements:

Job Description Special Inspector/Experienced Construction Materials Field Technician HURRY! $2500 SIGN-ON BONUS* $$$ for all new hires! The compensation range for this position is $30.00 - $40.00/hour based on years of experience and certifications. Hillis-Carnes Engineering Associates (HCEA) is a multi-disciplined ENR Top 500 engineering firm with 20 offices in the mid-Atlantic. We have a demonstrated history of success for the past 35 years. We are 100% employee-owned ESOP, and our history of success can be attributed to our motivational employee owner. We believe in fostering teamwork, rewarding ambition, and providing opportunities for professional advancement. We are actively seeking an ICC Special Inspector/Experienced Construction Materials Field Technician for our South Plainfield, NJ office. Primary job functions include field observation, testing, sampling and review of including, but not limited to soils, aggregates, concrete, grout, masonry, fireproofing, and structural steel placement. Requirements: A minimum of 3 years of relevant experience. Applicable ICC Certifications in at least one of the following categories: Soils, Reinforced Concrete, Masonry, Spray-Applied Fireproofing, etc. New Jersey Department of Community Affairs (DCA) licenses preferred. Valid driver's license and satisfactory driving record. Must meet additional pre-employment criteria. Reliable vehicle suitable for use on construction sites. Ability to work nights and weekends, as required. Ability to lift and/or move up to 60-80 pounds (soil and concrete samples, nuclear gauges, etc.) Strong verbal and written communication skills. Ability to interpret engineering and construction plans/specifications. Basic math and computer skills. Do you need another reason to apply? We are a proudly an employee-owned company and we believe our employees should have the best benefits! Hillis-Carnes' benefits package which includes paid holidays, generous paid time off, medical (with Health Savings Account options), dental, vision, long-term and short-term disability, 401k plan with a company match, Employee Stock Ownership Plan (that means you have ownership in the company upon eligibility!), employee assistance plan, company events, wellness program, employee self-service site, and much more. Hillis-Carnes is an Equal Opportunity Employer/Affirmative Action Employer Minorities and Women are encouraged to apply. *1,000 paid after successfully completing 90 days of employment; additional $1,500 after successfully completing six months of employment. Job Posted by ApplicantPro

Job DescriptionDescriptionCME Associates, a leading engineering and consulting firm in Parlin, NJ, is seeking a highly skilled Inspector to join our team. The ideal candidate will have experience in various construction aspects, ideally, including sheet pile, and concrete formwork & reinforcement. Experience in water main, storm sewer, paving, and civil site work is a plus. As an Inspector, you will play a crucial role in ensuring compliance with project specifications and industry standards. Responsibilities • Conduct Inspections: Perform on-site inspections to monitor construction activities and ensure compliance with project plans, specifications, and applicable codes., • Documentation: Maintain accurate records of construction activities, including daily reports, photographs, and inspection logs., • Quality Assurance: Conduct quality assurance checks on materials, workmanship, and construction processes to ensure conformance with project requirements., • Coordinate with Contractors: Communicate regularly with contractors to address concerns, provide guidance, and facilitate the resolution of construction-related issues., • Compliance Oversight: Monitor contractor compliance with safety regulations, environmental requirements, and permit conditions., • Progress Reporting: Provide regular progress updates to project managers and clients, highlighting milestones achieved and potential delays., • Problem Resolution: Identify and resolve construction-related problems promptly to minimize project disruptions and maintain schedule adherence. Qualifications • Experience: Minimum of 3 years of relevant experience in construction inspection, preferably in the areas of pile driving, concrete work, water main, storm sewer, paving, and civil site work., • Certifications: Possession of relevant certifications such as ACI Concrete Field Testing Technician Grade I, NICET certifications, or equivalent., • Knowledge: In-depth understanding of construction methods, materials, and industry regulations., • Communication Skills: Strong verbal and written communication skills to effectively interact with contractors, clients, and project stakeholders., • Attention to Detail: Meticulous attention to detail to identify discrepancies and ensure adherence to project specifications., • Problem-Solving Skills: Ability to troubleshoot issues and propose effective solutions in a dynamic construction environment., • Team Player: Demonstrated ability to work collaboratively within a multidisciplinary team environment. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job Description Job Description Date 05/2018 Location 1300 Airport Road, North Brunswick NJ Title Assistant, Supervisor Department Packaging Reports to Supervisor, Packaging FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Assistant Supervisor position is responsible to assist with planning, coordinating, and managing all activities of those employees in the packaging department. Safety, sanitation, housekeeping, GMP standards, problem solving ability as well as good employee relations are considered key elements to success. Areas of Responsibility • Ensures that timelines are met by distributing workload in accordance with changing priorities., • Ensures operation of equipment by coordinating, preventative maintenance, repairs; and evaluating new equipment and techniques., • Responsible for packaging production employees including mechanical support staff., • Oversees day to day operation of filling and packaging environment., • Coordinate activities and assist in setting priorities of mechanics and warehouse materials handlers to keep the production lines running efficiently and consistently., • Communicate all packaging activities with the Lead QA inspector to proper QA support is available., • Create and issue required packaging paperwork to line leaders and audit it daily for completeness and accuracy., • Prepare for the new shift by reviewing all entries to the log, packaging line status and issues., • Conduct routine meetings with departmental employee groups to provide guidance and to review problems, new procedures, and customer issues., • Works closely with Quality and Planning department to execute production plan., • Evaluates/solves production problems by reviewing the area of concern, developing potential solutions, technically evaluating, or testing the solutions, and preparing recommendations for management., • Maintain a work environment which fosters teamwork and supports the company’s efforts to continuously improve processes., • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Follow batch records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times., • Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Assist the Supervisor to complete necessary Activity Reports for management., • Ensure products are staged for counting and inspection., • Foster a collaborative environment in which diverse backgrounds are respected and valued., • Establish and maintain effective relationships with your peers, team, and senior managers in order to communicate effectively., • Provides clear direction & expectations for direct reports and assures that tasks & responsibilities are clear., • Sets goals and objectives in alignment with the organization for self and direct reports: Creates action plans, sets milestones, and delivers progress reports and developmental plans for team members., • Develop employees that contribute to the daily success of the line and can be successful in the supervisor’s absence., • Maintains open lines of communication with employees, peers, and management., • Assumes responsibility for the efficient, timely, and accurate completion of warehouse functions, • Learns and understands specific manufacturing operations sufficiently and is able to provide support in other areas as needed., • Evaluates performance of employees and creating corrective action plans where appropriate., • Assists with personnel decisions including hiring, terminations, attendance management, wage decisions, transfers, and promotions., • Interpret and explain the policies of the USPL Handbook so employees can understand the application of each policy as well as management’s purpose for each policy., • Apply all company policies fairly and consistently across departments and develop a relationship of trust and transparency with their employees., • Identify strengths and weaknesses of all associates on their team to ensure optimal performance; knows which employees they can assign additional tasks to, and which need closer scrutiny., • Works extended hours and occasional weekend overtime., • Responsible for ensuring each employee works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems., • Responsible for maintenance of warehouse equipment, providing both preventive maintenance programs and communicating all necessary repairs to Director of Facilities., • Responsible for warehouse safety programs in order to provide a safe and clean workplace for employees and within the regulations of all OSHA local and state regulations. Education & Qualification: • BA degree and/or 2+ years Line Leader experience, • Demonstrates ability to work in a team and assist others., • Bi-Lingual in Spanish or Hindi is a plus., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on production floor a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift - 3:30 pm to !2:00 am