Trabajos inspector en Wayne, New JerseyCrear alertas

We help clients get work done more efficiently and economically, without compromising quality. Job Title: Quality Technician/Inspector Location: Clifton, New Jersey Type: Contract To Hire Compensation: $23-28 Contractor Work Model: Onsite Hours: Mon-Fri 3p-11p (Training on 1st Shift or Mid Shift) DU

Job DescriptionURGENTLY hirng a 2nd Shift Electornic Quality Inspector Pay: $25 - $30 Shift: 3pm - 11pm, Monday - Friday Location: Fairfield, NJ Responsibilities • Inspect and ensure that purchased and assembled materials conform to documented specifications., • Perform daily routine inspection samplings based on specified plans on components, raw materials, and finished products., • Work within the Quality Assurance department to ensure all incoming and outgoing products meet the highest quality standards., • 3-5 years of prior quality inspection experience in the electronics field., • Certification in IPC-A-610 and J-STD-001. Work in a climate-controlled environment with a focus on quality over quantity, where a flexible schedule accommodates your needs. Enjoy a laid-back atmosphere in a small to medium-sized company with about 40 employees, fostering a team-oriented culture where everyone wears numerous hats. Work Environment The work environment is climate-controlled and deadline-intensive, with a medium work pace focusing on quality. The dress code is casual, allowing for T-shirts, shorts or jeans, and tennis shoes. The company values teamwork and flexibility, providing a relaxed atmosphere with a family-oriented culture. Pay and Benefits The pay range for this position is $25.00 - $26.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fairfield,NJ. Application Deadline This position is anticipated to close on Oct 3, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description We specialize in the manufacturing of tight tolerance medium to complex aerospace components and assemblies. We are AS9100D. Qualifications • Minimum 2-5 year’s experience in manufacturing / job-shop environment, • Solid working knowledge with: blue print reading, inspection instruments, tolerancing, GD&T, etc, • Knowledge of Mitutoyu MiStar 555 desired., • The ability to multi-task while accurately performing in-process and final inspections on CNC manufactured parts is a must, • Experience inspecting close tolerance parts (±.001 to ±.0005) using inspections tools such as micrometers, linear height gage, CMM, depth mics, etc, • Perform job responsibilities according to internal process specifications and third-party requirements, • Utilize proper PPE, safety equipment, and follow safety procedures, • Assist support functions in root cause analysis, • Must be able to multi-task and work within deadlines, • Proactively work to improve efficiency and quality of products, • Use manual and automated measuring / testing equipment to assure product quality, • Cross-train with employees as needed based upon knowledge and experience, • Compliantly complete all written and/or electronic labor tracking documentation, • Report problems to appropriate resource and/or Coach, • Keep all shift operators informed on special problems involving operation or set up, • Communicate with team to ensure all team members are aware of product deficiencies, new processes, or issues, • Provide feedback to appropriate support functions

Job DescriptionDescription: We are seeking a detail-oriented Quality Control Inspector to support our Quality Assurance team. This role is responsible for maintaining records related to the ISO 9001:2015 Quality Management System and conducting internal audits as assigned by the QA Manager. The ideal candidate will ensure compliance with quality standards and contribute to the continuous improvement of our processes. Essential Job Responsibilities not limited to: 1. Maintain Quality Records • Check and keep C of C’s (Certificate of Conformance) related to designed incoming materials such as steel and rubber products., • Oversee the calibration system to ensure all items requiring calibration are up to date., • Oversee and physically manage RMA materials once they have been received into the system., • Inspect and confirm transfers from other VMC facilities, reporting findings to supply chain. 2. Auditing • Provide support for IBC 17065 seismic audits, • Random sampling of in-process products to confirm specifications through dimensional checks., • Where a manufactured product does not meet quality specifications, QA investigates/reports production line failures and identifies products for re-work., • Documents inspection results by completing reports and logs (record keeping). 3. Training • Perform New Employee Quality System Training for both shop and office personnel., • Understand SWIs sufficiently enough to give direction to new employees concerning QMS. 4. Other • Proficient in Microsoft Office, • Perform statistical analysis of RMAs, customer complaints, and in-house inspections., • Ability to read and interpret blueprints and apply knowledge to inspection of products., • Ability to use calipers, height gauges, thread gauges, durometers, etc., • Strong attention to detail., • Excellent verbal communication skills., • Effective written communication abilities., • Strong organizational skills with the flexibility to adapt to shifting priorities., • Ability to sit and work at a computer for extended periods., • Capable of lifting up to 25 pounds and reaching/bending to access documents in cabinets and on shelves., • Bachelor’s degree or 2-3 years of relevant experience in Quality Assurance., • Experience in an ISO 9001-certified environment., • Bilingual in Spanish is a plus but not required. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals

Job Description COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: Responsible for the Quality Inspection and Testing of Aircraft, Military, and Industrial Gas and Oil production Equipment through the Non-destructive testing of X-Ray and inspection and test. Collect and report data to be presented to the customer for reporting purposes. The Quality Inspector is responsible for providing inspection and administrative support in order to ensure that all Quality matters are handled timely and efficiently. ESSENTIAL DUTIES AND RESPONSIBILITIES: The Quality NDT Inspector is a hands-on representative of the Quality Department whose job is to help ensure all basic NDT Inspections: visual, x-ray, and test inspections are performed to ensure product integrity and compliance to all specifications at the production facilities. • X-Ray Inspections of products and components, • Visual and dimensional inspections, • Generation of Inspection Reports, • Internal Auditor, • Verification of Lot Acceptance Testing results, • RSO for both sites, • Lead for the x-ray department, • Uses engineering drawings to determine quality and reliability standards, • Prepares and documents non-conformance reports, • Follows procedures as defined by CAD policies, procedures, and AS9100D requirements., • Maintains confidentiality of all information processed., • Interfacing with Customers as needed Perform other related duties as assigned. PHYSICAL DEMANDS: Must possess sight/hearing senses, or use prosthetics that will enable these senses to function adequately so that the requirements of this position can be fully met. Physical activity includes walking, standing, bending, squatting, reaching above shoulders, and lifting up to 40lbs. The candidate for this position may have to spend long hours using a computer, which can cause eye strain. This position will have to manage a number of requests and situations at one time. Stress may be caused by the need to complete tasks within tight deadlines. WORK ENVIRONMENT: Performs office activities in a lighted and ventilated area. May be subject to changes in temperature and exposure to dust. Will work in a normally acceptable office environment, with no abnormal hazards or risks. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. QUALIFICATIONS, KNOWLEDGE, AND SKILLS: The ideal candidate will be a seasoned NDT Level II technician with RT (X-ray) experience. ASTM E-1742 This practice establishes the basic parameters for the application and control of the radiographic method. This practice is written so it can be specified on the engineering drawing, specification, or contract. It is not a detailed how-to procedure to be used by the NDT facility and, therefore, must be supplemented by a detailed procedure (see 6.1). Test Methods E1030, E1032, and E1416 contain information to help develop detailed technique/procedure requirements. MIL-STD 453C MIL-STD-453C, MILITARY STANDARD: INSPECTION, RADIOGRAPHIC (27 DEC 1984) [S/S BY ASTM-E1742] [SUPERSEDES MIL-STD-00453B & MIL-R-11470A] [S/S BY ASTM-E1742]., The purpose of this military standard is to prescribe the radiographic inspection requirements for metallic and nonmetallic materials. Experience in the inspection of manufactured aerospace components or military NDT training is a plus. EDUCATION AND EXPERIENCE: • Bachelor's or Master's degree in business, aerospace engineering, related discipline., • 3+ years of experience in pyrotechnics, explosives, energetics, or related fields in aerospace and defense., • Proven experience in aerospace component development, testing, or systems integration., • Ability to think strategically and execute tactically in a highly competitive environment., • Strong understanding of aerospace design standards and regulations (e.g., AS9100, FAA, EASA, USG, DOD Requirements)., • In-depth knowledge of explosive and energetic materials, chemistry, safety protocols, and regulatory standards., • Physical inspection experience utilizing calipers, Micrometers, Microscopes, Electrical Test equipment, • MIL-STD 453C radiographic Inspection, • Team Building, • Analytical and problem-solving skills, • Decision making skills, • Effective verbal and listening communication skills, • Computer skills including the ability to utilize spreadsheet and word-processing programs at a highly proficient level, • Prior X-Ray Radiographic Inspection minimum Level 1 required Level 2 or 3 preferred. **Preferred but not required: • Time management skills, • Possess cultural awareness and sensitivity, • 1-2 years' experience preferred, • Organizational, communication, and project management skills., • Ability to interact diplomatically with people both in person, in email or on the telephone. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR-controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, To the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment.

Job Description Title: MEP inspector Location: Paterson, NJ 07501 Job Type: Full-Time Qualification: 2 to 5 years’ experience MEP experience Inspection experience Construction experience Transit experience Company DescriptionJCMS, Inc. is headquartered in Mercerville, New Jersey with office in New York. We have over eighty five employees on our full time staff in various disciplines. They are cost estimators, cost and scheduling engineers, document control specialists, office engineers, resident engineers and construction inspectors. Since 1985, JCMS has provided the aforementioned services on more than two hundred fifty (250) projects ranging in size from $1 million to over $1 billion. JCMS is a fast-growing medium-sized business and a recognized industry leader in project management, construction management, project controls, scheduling, cost estimating, and related fields. We offer competitive salaries, generous industry-leading benefits, flexible work schedules, and more. The Company pays 90% of the premium for health, vision, and dental insurance; offers a 401(k) Plan with generous company match; and medical, dependent care, transit, and parking FSA accounts; Health Savings Account (HSA), among other benefits. JCMS has in pJCMS, Inc. is headquartered in Mercerville, New Jersey with office in New York. We have over eighty five employees on our full time staff in various disciplines. They are cost estimators, cost and scheduling engineers, document control specialists, office engineers, resident engineers and construction inspectors. Since 1985, JCMS has provided the aforementioned services on more than two hundred fifty (250) projects ranging in size from $1 million to over $1 billion. JCMS is a fast-growing medium-sized business and a recognized industry leader in project management, construction management, project controls, scheduling, cost estimating, and related fields. We offer competitive salaries, generous industry-leading benefits, flexible work schedules, and more. The Company pays 90% of the premium for health, vision, and dental insurance; offers a 401(k) Plan with generous company match; and medical, dependent care, transit, and parking FSA accounts; Health Savings Account (HSA), among other benefits. JCMS has in p

Job Description An award-winning consulting engineering firm located in Elmwood Park, New Jersey is seeking a mid-level candidate who is willing to join our environmental/hazardous materials team. Under the supervision of a Project Manager, the candidate will conduct office and field work for the clients in compliance with environmental and hazardous materials regulations. Candidate will schedule work, communicate with clients, budget projects, as well as perform related duties as required. DUTIES AND RESPONSIBLITIES: • Asbestos/lead paint and other hazardous substances investigation and sampling of suspect materials in compliance with sampling protocol., • Project monitoring during asbestos abatement., • Develop and/or review abatement and remediation plans and specifications. Ability to read architectural and MEP drawings., • Evaluate laboratory results, assess, and delineate the extent of hazmat location areas., • Assist Project Manager in developing survey reports, abatement plans and construction documents for abatement., • Interact with responsible parties and their representatives., • Ability to work effectively under the deadline.REQUIREMENTS:, • Bachelor’s degree in environmental science, engineering, or related field., • 3-5 Years of experience in related field., • Perfect knowledge of computer applications: Word, Excel, Power Point, etc., • Good writing and communication skills., • Comply with Federal, State and NYC regulations on abatement and handling of asbestos, EPA for lead paint, PCBs, mold, and other hazardous materials., • AutoCAD is a plus.PREFERRED CERTIFICATIONS:, • NYCDEP Asbestos Investigator, NYSDOL Asbestos Inspector and Project Monitor; EPA Lead Inspector; NYSDOL Mold Assessor.WORKING CONDITIONS AND PHYSCIAL EFFORT:, • Ability to work both in the office and in the field., • Quick mobilization for field work if required. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $90,000 - $120,000 Powered by JazzHR bGuXGMHH7N

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Conducts site inspection to monitor progress/conformance to specs and procedures, • May be expected to design portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of unapproved materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Prepares interim and completion project reports, • Provides status and progress reports to customer, project team, and management, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • May lead junior level staff and interns by providing guidance, answering questions and being a resource to them, • May direct tasks, other junior level staff and interns as needed, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Travels 25% (Site) to 100% (Geotechnical/Environmental) of the time which may be out of state Supervisory Responsibilities: This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in Civil Engineering with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred., • Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements., • 40-hour OSHA HAZWOPER certification, • Engineer in Training (EIT) preferred or have the ability to become registered within six months., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, MS Word, Excel, Adobe. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $55,000–$80,000 + overtime, mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned • Conducts site inspection to monitor progress/conformance to specs and procedures, • May be expected to design portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of unapproved materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Prepares interim and completion project reports, • Provides status and progress reports to customer, project team, and management, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • May lead junior level staff and interns by providing guidance, answering questions and being a resource to them, • May direct tasks, other junior level staff and interns as needed, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Travels 25% (Site) to 100% (Geotechnical/Environmental) of the time which may be out of state Supervisory Responsibilities: This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in Civil Engineering with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred., • Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements., • 40-hour OSHA HAZWOPER certification, • Engineer in Training (EIT) preferred or have the ability to become registered within six months., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, MS Word, Excel, Adobe. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $55,000–$80,000 + overtime, mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Conducts site inspection to monitor progress/conformance to specs and procedures, • May be expected to design portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of unapproved materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Prepares interim and completion project reports, • Provides status and progress reports to customer, project team, and management, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • May lead junior level staff and interns by providing guidance, answering questions and being a resource to them, • May direct tasks, other junior level staff and interns as needed, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Travels 25% (Site) to 100% (Geotechnical/Environmental) of the time which may be out of state Supervisory Responsibilities: This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in Civil Engineering with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred., • Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements., • 40-hour OSHA HAZWOPER certification, • Engineer in Training (EIT) preferred or have the ability to become registered within six months., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, MS Word, Excel, Adobe. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $55,000–$80,000 + overtime, mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Plans, coordinates, and institutes functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This is a transitional position for someone with the required field experience and/or education to gain project engineering experience in a supervised manner prior to advancing into the Project Engineer role. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Solves complex problems and calculations, using engineering formulas and skills, • Evaluates research by others and writes reports, • Assists the Project Engineer in the preparation of proposal estimates of time and expenses required to complete the project, • Assists the Project Engineer in scheduling staffing requirements for field projects, • Assists the Project Engineer in supervising and instructing, as needed, the responsibilities of field personnel on projects assigned to them, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Participates in the integration of technical activities, • Evaluates and presents changes for design, specifications, drawing releases, reports, etc to the Project Engineer and /or Project manager for approval, • Prepares interim and completion project reports, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Performs site inspection to monitor progress/conformance to specs and procedures, • Designs portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • Plans schedule of research according to company’s or contracting organization’s timetable and establishes daily or weekly routines necessary to meet project timetable, • Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project, • Supervises field work and performs field work when needed, • Establishes work plan and staffing for each phase of project and arranges for recruitment or assignment of project personnel, • Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority, • Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget, • Supervises and delegates assignments to staff, • Oversees staff’s daily activities to ensure it is correct and complete, • Reviews status reports prepared by project personnel and modifies schedules or plans as required, • Prepares project reports for management, client, or others, • Confers with project personnel to provide technical advice and to resolve problems, • Coordinates project activities with activities of government regulatory or other governmental agencies, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in civil engineering with a minimum of 3-5 years of field or related experience where a PE license counts towards that related experience, a bachelor’s degree in a related field, and demonstrates ability to meet the requirements of the job as set forth in this description. Previous construction experience is preferred., • Professional Engineer (PE) license is preferred or have the ability to become licensed within 2 years of being in this position., • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE) preferred or have the ability to become licensed within 2 years of being in this position., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% up to 75% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $90,000–$120,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Qualified Field Inspectors For Insurance Loss Control.Pay: We pay a competitive standard flat fee per case based on customer as well as inspection type and complexity.The dominant standard flat fee range is $60 - $75, with some exceptions.Job Type: Independent Contractor.We are currently seeking ins

Be part of the future! We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference. What you will do: Inspectors are responsible for conducting routine inspections, testing, service, and preventative maintenance on Electrical, Sprinkler or Suppression life safety product lines as well as similar competitive manufacturers’ product lines. How you will do it • Perform routine inspections, testing, servicing, installing and preventative maintenance of life safety product lines as well as similar competitive manufacturer's product line., • Accurately discern and document deficiencies found during an inspection., • Complete Service Acknowledgement/inspections with proper coding through communicating devices, such as laptop computers, smartphones, and/or hardcopy., • Follow and maintain a highly structured inspection schedule., • Make minor repairs and programming changes to systems being inspected., • Complete assigned inspections on time, • Carry/move equipment and tools weighing up to 70lbs and be capable of performing physical labor., • Assist foreman in the installation of wet, dry, pre-action, and deluge sprinkler systems., • Perform work in unusual and sometimes difficult positions, such as climbing ladders, scaffolding, and high lift equipment. What we look for • 3+ years of documented experience in sprinkler systems, • Able to obtain and retain any licenses that are required by National, State and Local codes., • Experience with wet, dry, pre-action, deluge, fire pumps, and foam systems, • Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals., • Experience with hand tools and multi-meter usage., • Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs., • Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc., • Ability to work flexible hours including on-call rotation, nights, and weekends to meet customer requirements., • Demonstrate a high level of customer service., • Ability to adhere to, implement, and follow safety guidelines and procedures at all times., • Strong organizational skills, positive attitude, and an ability to learn quickly. Pay Range: $38.00 hourly rate determined by the CBA/rate sheet. Benefits are provided through a local labor union aligned with a collective bargaining agreement.

Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. FAR Inspections is looking for highly motivated individual

Job DescriptionSalary: 40-60 per hour flat rate • 5-day work week (Monday Thru Friday! We are closed weekends!!!), • 6 Paid holidays, • Paid Time Off, • Medical Insurance, • Dental & Vision Insurance, • 4% Safe Harbor Match after 90 days, • In-house Company Paid Training, • Service Advisors who can sell your work!, • A team that wants to help you succeed! We are looking for an EXPERIENCED technician with their NJ State Inspection license that wants to work with others that are at the same professional level as themselves and that can provide high quality repairs on vehicles. We are searching for someone that is a self-starter and works well with others. This person should be efficient and productive. We are a team that works together to serve our customers and fix cars right the first time. We do things a little differently at our shop and want someone who is open to learning processes that have proven to create an environment that is free from chaos and drama. Our people and systems have earned us a 4.9 Google rating with over 400 reviews. We know what it's like to feel unappreciated as a great technician. Our owner and manager are former technicians and understand the technician mindset. We know how it feels to not have your voice heard and to work with broken or no shop tools. We strive to always show appreciation and be the place EVERYONE wants to work at. Pay will vary based on ability and experience but our experienced technicians usually start making no less than $90k per year. Most make more than $100,000 per year. We fully understand that the person we are looking for likely already has a job. If you are reading this and you don't feel like you are respected, treated fairly, or cared about at your current job, we need to talk. Respond to this ad with your resume.

H&S LOSS CONTROL INSPECTIONS, INC COMPANY INFORMATION:. We have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. PAY: We pay a competitive standard flat fee per case -based on customer as well as, inspection type and comple

Job Description Spark Car Wash is a high growth, institutionally backed express exterior car wash company serving the Northeast region. Our mission is to make car washing an energizing experience for everyone. We are focused on becoming the premier brand in the market by providing consistent excellence to our customers and an enriching environment to our employees. Spark is in the process of launching multiple new locations with a vision of becoming the largest chain in the market by 2027. Our team is ambitious, and we strive to give every car a clean owner and every employee a fulfilling career. You would be joining an innovative brand with lots of potential for growth. Your role is to greet our customers in a kind and professional manner that adds a smile to their day and provides a safe, fast, friendly experience while ensuring a clean, well-maintained facility. In addition, you will receive cross training in other duties and procedures so that you can grow your skill set and assist in other roles. Car Wash Associates are paid hourly plus commission on their membership sales when working at the XPT station. What you will be doing: • Be the friendly face of Spark, offering customers a smile and prompt service, • Advise our guests on their purchases and let them know about the amazing deals and free amenities that we offer. Car wash associates are compensated for each membership sold, • Identify opportunities to improve our customer service – we love hearing new ideas, • Control traffic flow and pedestrian safety, ensuring correct vehicle processing is followed, • Take charge of keeping the car wash, the grounds, and the restrooms clean, tidy and well-stocked. You will be a mean mopper, a swift trash gatherer, a whiz at unclogging vacuums and a pro at cleaning the pit to ensure everything runs smoothly., • Be the eagle-eyed vehicle inspector at the tunnel entry, checking cars are entering safely, • and removing excess dirt and debris, • The Car Wash Associate position is a significant role at Spark – you’re the face of our brand. You’ll be good with people and have a real sense of pride in your work, • Spark is a fast-paced, dynamic environment – we are looking for someone who can follow instructions but also work independently with great time management skills, • We are looking for a candidate who loves interacting with people, • We are looking for a candidate with great attention to detail – someone who can spot a problem quickly, • Because we are growing, we are interested in candidates who also love to be curious, to learn, and to grow Physical Requirements/Working Conditions: • The position requires the ability to perform physical activities that require considerable use of your hands, arms and legs and moving your whole body, such as walking, standing, bending, stooping, and handling of tools/materials as well as lifting up to 50 lbs, • The position requires the ability to see details at close range (within a few feet of the observer), • Competitive salary with performance-based incentives, • Starting salary $15.86, • Comprehensive health, dental, and vision insurance, • Retirement savings plan with company match, • Paid time off and holidays, • Free Car Washes

Qualified Cpsi - Certified Playground Safety Inspector - Field Inspectors For Insurance Loss Control. We are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training cou

AISC standards, welding symbols, and fabrication drawings.

Join Cartridge Actuated Devices as a Full-Time Quality NDT Inspector Level II/III and immerse yourself in a dynamic manufacturing environment located in Fairfield, NJ.This onsite position offers an opportunity to apply your skills in non-destructive testing while collaborating with a team dedicated

Ability to read drawings and welding symbols. Perform welding tasks in accordance with project specifications and standards. Read and interpret blueprints and welding symbols.

We are hiring immediately for a Railroad Auto Inspector to Join our team at the Norfolk Southern Doremus, NJ auto facility in a recession-proof industry! This is an. The Auto Inspector is responsible for verifying the inventory of equipment and autos as well as checking incoming and outgoing equipme

Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. H&S Loss Control Inspections, Inc Company Information. We have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Plans, coordinates, and institutes functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This is a transitional position for someone with the required field experience and/or education to gain project engineering experience in a supervised manner prior to advancing into the Project Engineer role. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Solves complex problems and calculations, using engineering formulas and skills, • Evaluates research by others and writes reports, • Assists the Project Engineer in the preparation of proposal estimates of time and expenses required to complete the project, • Assists the Project Engineer in scheduling staffing requirements for field projects, • Assists the Project Engineer in supervising and instructing, as needed, the responsibilities of field personnel on projects assigned to them, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Participates in the integration of technical activities, • Evaluates and presents changes for design, specifications, drawing releases, reports, etc to the Project Engineer and /or Project manager for approval, • Prepares interim and completion project reports, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Performs site inspection to monitor progress/conformance to specs and procedures, • Designs portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • Plans schedule of research according to company’s or contracting organization’s timetable and establishes daily or weekly routines necessary to meet project timetable, • Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project, • Supervises field work and performs field work when needed, • Establishes work plan and staffing for each phase of project and arranges for recruitment or assignment of project personnel, • Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority, • Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget, • Supervises and delegates assignments to staff, • Oversees staff’s daily activities to ensure it is correct and complete, • Reviews status reports prepared by project personnel and modifies schedules or plans as required, • Prepares project reports for management, client, or others, • Confers with project personnel to provide technical advice and to resolve problems, • Coordinates project activities with activities of government regulatory or other governmental agencies, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in related field with a minimum of 3-5 years of field or related experience where a LSRP license counts towards that related experience, a bachelor’s degree in a related field, and demonstrates ability to meet the requirements of the job as set forth in this description. Previous construction experience is preferred., • Licensed Site Remediation Professional (LSRP) license is preferred or have the ability to become licensed within 2 years of being in this position., • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE) preferred or have the ability to become licensed within 2 years of being in this position., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% up to 75% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $85,000–$115,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

AECOM is actively seeking a highly talented Electrical Inspector for immediate employment to join our Water Operations in the Bloomfield, NJ office. As an Electrical Inspector you will observe and accept installation of electrical distribution systems, including electrical switchgear, substations, m

One of our clients, based in New Jersey, is urgently looking for a QC Inspector/QC Associate to join their team in an FDA-regulated manufacturing environment, this is a 6 months contract to hire.

In some cases, you will split the county with another inspector if there is enough volume for two inspectors. We contract with inspectors at a county level.

We are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as the VIITA Basic Commercial Line Inspector course or its equivalent. Qualified Field Inspec

UniFirst - 86688008016 [Production Operator / Assembly Line Worker] As a Garment Inspector & Hanger at UniFirst, you'll: Count garments; Hang garments to be processed through the steam tunnel; Visually inspect all garments for tears, holes, stains, and damage; Ensure all garments pass the UniFirst 2

The Electrical Inspector V will observe and accept installation of all electrical distribution systems, including electrical switchgear, substations, motor control centers, panelboards, electrical cabling with electrical trays and conduits, and communication systems and cabling. The Construction Ins

Road And Bridge Senior Construction Inspectors. Dewberry is seeking multiple Road and Bridge Senior Construction Inspectors to work on NJDOT projects in New Jersey.

One of our clients, based in New Jersey, is urgently looking for a QC Inspector/QC Associate to join their team in an FDA-regulated manufacturing environment, this is a 6 months contract to hire.

Are you looking for a career in a fast paced, growing business with lots of opportunity for advancement? If so, then Encore Fire Protection may be the place for you.Encore is redefining the fire protection industry by taking a customer-first approach to everything we do.Our success throughout New En

Construction Inspector - SkillBridge Eligible Opportunity. Dewberry is seeking multiple Road and Bridge Construction Inspectors to work on NJDOT projects in New Jersey.

Duties include assisting both the Lead Inspector and/or Inspection Manager in collecting data and generating any necessary paperwork (Sprinkler Inspection Reports, Quick Reports, and Inspection Certificates).

Qualified Cpsi - Certified Playground Safety Inspector - Field Inspectors For Insurance Loss Control. We are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training cou

Road And Bridge Construction Inspectors. Dewberry is seeking multiple Road and Bridge Construction Inspectors to work on NJDOT projects in New Jersey.

Inspectors are responsible for conducting routine inspections, testing, service, and preventative maintenance on Electrical, Sprinkler or Suppression life safety product lines as well as similar competitive manufacturers' product lines.