Trabajos maintenance engineer en Elizabeth, New JerseyCrear alertas

Job DescriptionBuilding Engineer Location: Jersey City, NJ Position Summary: BLT is seeking a dedicated and professional Building Engineer to join our luxury residential community in Jersey City, NJ. This position is responsible for supporting the operation, maintenance, and repair of building systems and equipment to ensure the property operates safely, efficiently, and reliably. The ideal candidate is hands-on, mechanically inclined, and experienced in residential building maintenance and mechanical/electrical systems. Responsibilities of the Building Engineer: • Perform mechanical and electrical maintenance, troubleshooting, and repair of building systems and equipment, • Respond promptly to service requests, building issues, and emergency maintenance situations, • Support preventative maintenance programs for mechanical, electrical, HVAC, plumbing, fire/life safety, generators, security, access control, BMS, and vertical transportation systems, • Assist in maintaining facility utilities including gas, electric, sewer, water, phone, and CATV services, • Conduct routine inspections of building systems, equipment, and common areas to identify maintenance needs and safety concerns, • Maintain accurate documentation, inspection records, and maintenance reports, • Assist with inventory control and organization of maintenance parts and supplies, • Ensure compliance with applicable codes, regulations, company standards, and safety procedures, • Support the upkeep and appearance of both interior and exterior property conditions, • Participate in a rotating on-call schedule to provide after-hours emergency coverage, • Communicate effectively with residents, vendors, supervisors, and team members regarding maintenance issues and completed work Qualifications of the Building Engineer: • 3+ years of hands-on experience maintaining central HVAC and mechanical systems, including water source heat pumps, cooling towers, and boiler plants., • Working knowledge of electrical systems and mechanical equipment, • Basic knowledge of local and national mechanical and electrical codes, • Ability to read and interpret blueprints and schematic diagrams, • Experience using hand and power tools safely and effectively, • Basic plumbing and piping knowledge, including compressors and air systems, • Strong troubleshooting and problem-solving skills, • Ability to work varying shifts, weekends, and holidays as neededPhysical Requirements of the Building Engineer:, • Ability to lift and carry up to 50 pounds., • Ability to climb ladders and safely work at varying heights., • Ability to access and work within confined or limited-access mechanical spaces as required to inspect, troubleshoot, and repair building equipment., • Ability to stand, walk, bend, kneel, crouch, and perform physical maintenance tasks for extended periods., • Ability to work indoors and outdoors in varying weather conditions. Compensation & Benefits: BLT offers a competitive compensation and benefits package, including: • Competitive salary of $80,000-90,000 with potential for bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Tuition reimbursement program, • Employee housing discount at BLT-owned properties BLT is an equal opportunity employer. This description is not intended to be a comprehensive list of all duties, responsibilities, or qualifications associated with this position. Other duties may be assigned as needed. PM21 Powered by JazzHR Compensation details: 80000-90000 Yearly Salary PI565db9d96ab2-25405-40595736

As a Packaging Engineer/ Product Development Manager, you’ll step into a high-impact, short-term backfill role supporting product development work across transversal projects. You’ll be the go-to project leader for key initiatives—helping keep timelines on track, driving risk visibility, and enabling smooth execution from launch planning through completion. If you enjoy structured project management, strong Excel-based tracking, and collaborating across Marketing, Operations, and R&I to deliver quality outcomes, this role is built for you. Job Title:Packaging Engineer/ Product Development Manager Location:Clark, NJ- hybrid Pay Range: $45 - 51/hr What's the Job? • Develop and manage project timelines, defining key tasks and milestones while minimizing risk to support on-time launches in compliance with the LOreal Quality system., • Present launch and transversal project reviews, driving risk escalations to Operational and Divisional leadership teams., • Guide Marketing through new innovation product briefs and conception definitions to support design alignment with Agility, Profitability, and LOreal For the Future (L4TF)., • Lead project review meetings, drive resolution of roadblocks, and coordinate cross-functional stakeholder participation and ownership for transversal projects., • Analyze and drive launch viability across cost, timeline, and sustainability (L4TF), including feasibility costs and COG analysis, value analysis support, and QCP project management. What's Needed? • Senior manager level experience (4–6 years) in package/product development and project management, preferably in cosmetics, consumer goods, or a related field., • Bachelor’s degree in Packaging Engineering, Operations, or a related technical discipline (technical packaging experience is a plus)., • Strong project management skills with proficiency in Microsoft 365, including Excel for tracking and documentation., • Proven ability to collaborate and build strong relationships across cross-functional teams, with clear written and verbal communication to influence at all organizational levels., • Ability to work onsite as an essential function of the position. What's in it for me? • Opportunity to manage transversal PPD development projects and potentially lead a product launch end-to-end with limited input once fully onboarded., • Chance to contribute to strategic catalog maintenance updates, plant transfers, and new product launches while supporting team continuity during short-term leaves., • Role designed for a seasoned, strategic, and agile leader who can inspire teams to move projects forward., • Exposure to risk assessment, mitigation planning, and cross-functional coordination across Operations and Research & Innovation (R&I)., • Experience-building work across QCP, feasibility costing, COG analysis, packaging component development, and launch viability evaluation. Upon completion of waiting period consultants are eligible for: • Medical and Prescription Drug Plans, • Dental Plan, • Vision Plan, • Health Savings Account, • Health Flexible Spending Account, • Dependent Care Flexible Spending Account, • Supplemental Life Insurance, • Short Term and Long Term Disability Insurance, • Business Travel Insurance, • 401(k), Plus Match, • Weekly Pay If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells. ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells – creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent.

Rotating Equipment Engineer – Linden, NJ Seeking a Rotating Equipment Engineer to support operations and maintenance at a major chemical manufacturing facility in Linden, NJ. • Provide engineering support for pumps, compressors, turbines, gearboxes, and other rotating equipment., • Troubleshoot equipment issues, conduct failure analysis, and recommend reliability improvements., • Support maintenance, inspections, equipment upgrades, and capital projects., • Develop technical specifications, review vendor documentation, and work with maintenance and operations teams. Requirements: Bachelor’s degree in Mechanical Engineering or related field, with experience in rotating equipment within chemical, petrochemical, refinery, or industrial manufacturing environments. Experience with reliability engineering and predictive maintenance is a plus.

Department: Engineering Employment Type: Full-Time Reports To: Engineering Management Work Arrangement: Onsite – Monday-Friday About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations We pride ourselves on delivering high-quality, custom-designed solutions that address the unique needs of our clients across various industries. Position Summary Lincoln Electric Products Co., Inc. seeks a highly motivated and results-oriented Switchgear Mechanical Engineer III to join our growing team. In this role, you will play a pivotal role in developing and innovating our low-voltage switchboard products. It is a full-time, exempt position, and the candidate will report directly to the Engineering Group Leader. Working Conditions: Office Environment Job Responsibilities: Develop comprehensive mechanical designs for switchboard enclosures, busbars, and structural components, utilize advanced CAD software to create detailed 2D and 3D models. • Select appropriate materials and manufacturing processes for all components, considering cost-effectiveness, performance requirements, and industry best practices., • Employ simulation and analysis tools to optimize designs for superior performance, reliability, and thermal management., • Lead the mechanical design process to comply with relevant industry standards and regulations (ANSI, IEEE, IEC, local codes)., • Ensure that switchboard design complies with relevant design practices, electrical codes, and safety standards such as UL891, UL67, UL508A, UL50, the National Electric Code (NEC), the New York City Electric Code (NYCEC), ANSI, IEEE, IEC, the Utility Standard, and local regulations., • National Electrical Code (NEC 2008-2020), NYNEC, UL 891, UL67, UL 50, UL 508a in product development, • Stay abreast of emerging standards, innovative materials, and innovative design methodologies., • Collaborate closely with electrical engineers, design teams, and project managers to achieve project objectives seamlessly., • Verify switchboard designs meet stringent mechanical performance and safety standards (e.g., UL, NEC)., • Investigate and resolve any mechanical quality issues or non-conformities identified during production or in the field., • Generate comprehensive engineering documentation, including detailed mechanical specifications, bills of materials (BOMs), and user-friendly technical manuals., • Maintain accurate records of all design changes, revisions, and updates., • Actively monitor project budgets and identify cost-saving opportunities through design optimization without compromising quality or safety., • Provide technical support for maintenance and repair activities on deployed switchboard products., • Assist in troubleshooting and resolving mechanical issues that may arise in the field. Skills, Requirements, and Specifications • Bachelor's degree in Mechanical Engineering (Master's degree a plus)., • Experience in sheet metal and fabrication design., • Proven experience in switchboard design., • Familiarity with major brands in the industry (Schneider, ABB, Eaton), • Proficiency in advanced CAD software for mechanical design AutoCAD, Autodesk Inventor., • In-depth understanding of mechanical standards., • Excellent communication, collaboration, and teamwork skills., • Ability to thrive in a fast-paced, results-oriented environment., • Meticulous attention to detail and a commitment to quality. Education: Bachelor's or Master's Mechanical Engineering Degree

Job Description: Grignard Company is seeking a motivated and dynamic Business Development Representative to join our Industrial team. The ideal candidate will be responsible for cold calling, prospecting, building relationships with new and existing customers, and contributing to the overall growth of the company. This position focuses on industrial chemical manufacturing and industrial applications within Water & Wastewater, Wire Rope & Lubrication, Mining & Mineral Processing, Food & Beverage Manufacturing, Offshore & Marine, Oil & Gas, and Industrial Processing & Manufacturing. Primary Responsibilities • Identify and develop new business through outbound prospecting — cold calling, email, LinkedIn, networking, trade shows, and referrals., • Research target accounts and identify key decision-makers (engineers, plant and maintenance managers, procurement, municipal utilities, contractors, OEMs, and distributors)., • Qualify inbound and outbound leads on strategic fit, project potential, and customer need, and maintain a consistent outreach cadence to grow pipeline., • Travel to customer sites, trade shows, and industry events to schedule and conduct introductory meetings for sales managers and technical sales reps, and coordinate presentations, lunch-and-learns, and follow-ups., • Promote company products and capabilities, and support strategic account penetration and specification development., • Partner with Industrial Solutions Representatives and Sales Managers to hand off qualified opportunities into active pipeline., • Assist with proposal development, quotation follow-up, and customer communication., • Manage all prospecting activity in the CRM daily — leads, opportunities, interactions, and account data — and generate activity and pipeline reports for management. Required Qualifications • Proven experience in business development, inside sales, B2B sales, lead generation, or customer development., • 5+ years’ experience within industrial, manufacturing, chemical, infrastructure, or technical industries preferred., • Strong prospecting and cold-calling abilities., • Excellent verbal and written communication skills., • Strong organizational and time-management skills., • Experience using CRM software. Zoho CRM preferred., • Proficient in Microsoft Office Suite., • Ability to travel periodically for customer visits, trade shows, and meetings. Career Path Opportunities • Territory Account Manager, • Technical Sales Engineer, • Business Development Manager, • National Account Manager What We Offer: • $55-$65K base salary plus bonus structure, • Comprehensive benefits package, including health, and vision insurance., • 401(k) plan, • Opportunities for professional development and career advancement., • A collaborative and supportive work environment. Grignard Company, LLC is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

We are seeking a highly accomplished Project Manager IV to lead routine, multi-disciplinary engineering capital projects from initial planning through final closeout. This role requires a strategic professional with a robust mechanical or civil/structural engineering background to oversee execution across key initiatives, including pump replacements, equipment upgrades, and piping installations. The successful candidate will drive project execution, maintain financial and operational rigor, and ensure cross-functional alignment. This long-term contract position offers strong multi-year potential beyond the initial two-year assignment. Core Responsibilities • Assemble and direct a full-time, multi-disciplinary team to successfully execute project objectives., • Oversee the formulation, implementation, and management of the Project Execution Plan., • Lead the Front-End Loading (FEL) process, conduct stage-gate reviews, and secure executive management approvals., • Formulate and execute the Contracting Strategy effort, managing contractor evaluation, bidding, and award processes., • Direct project cost control, scheduling, procurement, and billing/payables functions., • Evaluate, interview, and approve key personnel submitted by contractor organizations., • Interpret contract specifications and direct contractor performance to maximize efficiency, manage expenditures, and minimize claims or change orders., • Establish project facilities at both field sites and contractor office locations., • Establish safety standards, enforce compliance, and cultivate a zero-incident safety culture across project teams., • Engage plant Operations and Maintenance personnel to ensure clear operational alignment and accountability., • Enforce rigorous schedule development, monitoring, and controls to drive overall project performance., • Maintain cost estimate accuracy and generate precise monthly cash flow forecasts., • Implement management programs for vendors, fabricators, and specialized subcontractors., • Enforce adherence to quality management processes and Quality Assurance/Quality Control (QA/QC) standards., • Establish, secure approval for, and monitor project Key Performance Indicators (KPIs) and operational metrics., • Formulate and maintain a comprehensive project Risk Management Plan., • Prepare and deliver strategic project status presentations to executive leadership and key internal stakeholders., • Execute timely and efficient project closeout procedures in accordance with organizational standards. Required Qualifications • Bachelor’s Degree or higher in Engineering from an accredited institution., • Minimum of 10 years of progressive project management experience within the oil and gas or petrochemical industry., • Minimum of 5 years of dedicated experience acting as a Lead Project Manager with sole project accountability. Preferred Qualifications • 10 or more years of project management experience within refining or petrochemical operating environments., • 10 or more years of experience serving as a Lead Project Manager with sole accountability for multi-disciplinary capital projects., • Advanced working knowledge of industry recommended practices, design methodologies, and QA/QC requirements., • Comprehensive knowledge of applicable federal, state, and local regulations, industry standards, and Department of Transportation (DOT) requirements., • Demonstrated track record managing large-scale engineering and construction contractors and concurrent project teams., • Licensed Professional Engineer (PE) credential., • Project Management Professional (PMP) certification. Employment Details • Location: On-site / Field Office, • Employment Type: Contract (2-Year Initial Duration with Multi-Year Extension Potential)

We are growing!! LTM’ s Media & Entertainment team is looking for dynamic and enthusiastic candidates for an Archives Technical Engineer position in Iselin - NJ location. LTM is a global technology consulting and digital solutions company that enables enterprises across industries to reimagine business models, accelerate innovation, and maximize growth by harnessing digital technologies. As a digital transformation partner to more than 750 clients, LTM brings extensive domain and technology expertise to help drive superior competitive differentiation, customer experiences, and business outcomes in a converging world. Powered by nearly 90,000 talented and entrepreneurial professionals across more than 30 countries, LTN — a Larsen & Toubro Group company — combines the industry-acclaimed strengths in solving the most complex business challenges and delivering transformation at scale. For more information, please visit _. Job Description: Archives Technical Engineer: Iselin - NJ location The Archives Technical Engineer is part of a mission critical technology team responsible for the support and innovation of our clients News Production and Archives environments In this role you will be responsible for supporting and maintaining the workflows and infrastructure necessary to capture and preserve high-quality digital copies of archival tapes. This client facing role requires strong problem-solving skills technical expertise and excellent communication abilities Work Schedule: Sunday -Thursday 8-4 or 2-10 Tuesday - Saturday 8-4 or 2-10 You Will: • Act as frontline technical support providing troubleshooting and technical diagnosis for robotic tape systems, ingest capture servers, QC, and transcode platforms, • Configure and maintain tape digitization equipment including servers decks and software to ensure optimal performance and efficiency, • Troubleshoot technical issues related to tape digitization including errors data corruption and equipment malfunctions, • Perform preventative maintenance for software and hardware ensuring optimal performance and minimizing downtime, • Collaborate with internal teams including IT Engineering Maintenance and Operations to resolve issues, • Liaise with external vendors for technical support remote sessions processing RMAs and resolving technical issues, • Perform regular quality control checks on digitized files to ensure they meet the required standards for archival preservation and accessibility, • Communicate effectively with clients provide guidance and updates on issue resolution and ensure client satisfaction, • Document all technical issues and resolutions in a clear and concise manner Skills You Will Bring: • Proven ability to support video digitization encoding and transcoding platforms, • Experience with hardware integration and troubleshooting components such as VTRs encoders and SDI streams, • Proficiency in Windows Server and OS, • Knowledge of audiovideo codecs and formats, • Familiarity with MAMPAM systems and metadata management, • Foundational knowledge of enterprise infrastructure including routers firewalls TCPIP and DNS, • Experience with project management documentation and ticketing systems such as Service Now Asana Jira or Confluence, • Experience with cloudbased storage and processing platforms such as AWS or Azure is a plus, • Familiarity with database management systems such as PostgreSQL or MS SQL is a plus, • Effective Communication Skills, Customer Service Oriented, Teamwork and collaboration., • Ability to learn quickly and adapt quickly to changing priorities., • Strong intellectual curiosity and affinity to technology., • Exhibits attention to detail in day-to-day activities along with Problem solving abilities., • Technical curiosity and motivation to succeed. Well-rounded extra-curricular experiences, with demonstrated leadership. Education: • Bachelor’s degree or higher with a technology focus., • Majors include Math, Engineering, Computer Science, Computer Information Systems, Information Technology, Cyber Security, and others., • 3.0 GPA or higher. LTM is an equal opportunity employer that is committed to diversity in the workplace. Our employment decisions are made without regard to race, color, creed, religion, sex (including pregnancy, childbirth or related medical conditions), gender identity or expression, national origin, ancestry, age, family-care status, veteran status, marital status, civil union status, domestic partnership status, military service, handicap or disability or history of handicap or disability, genetic information, atypical hereditary cellular or blood trait, union affiliation, affectional or sexual orientation or preference, or any other characteristic protected by applicable federal, state, or local law, except where such considerations are bona fide occupational qualifications permitted by law.

Are you a skilled technician with a passion for machinery and problem-solving? Do you thrive in fast-paced environments that require travel and hands-on work with cutting-edge equipment? If so, this is your chance to advance your career as a Field Service Engineer II with a leading company specializing in CNC fabrication machinery. Be part of a team that values technical expertise, customer satisfaction, and continuous learning! Overview As a Field Service Engineer II, you will play a crucial role in installing, troubleshooting, maintaining, and training customers on sophisticated CNC fabrication equipment, including punch presses, fiber lasers, mills, lathes, and turning centers. Your mechanical expertise will help ensure the smooth operation of long-standing machines at client sites across the country. This position offers an exciting mix of technical challenge, travel opportunities and the satisfaction of solving real-world manufacturing issues. If you’re ready to contribute your skills in a dynamic environment and grow your professional portfolio, we want to hear from you! Required Skills • Strong mechanical aptitude with experience in hydraulics, pneumatics, and mechanical troubleshooting, • Proficiency with hand tools and machine tools, • Ability to adjust CNC controls (Fanuc controllers a plus) and perform basic parameter changes, • Knowledge of electrical/electronic systems, including troubleshooting and diagnostics, • Excellent problem-solving skills and a professional approach, • Ability to read and interpret technical manuals, schematics, and regulations, • Effective communication skills for training and customer support Nice to Have Skills • Experience with CNC programming or operation, • Familiarity with machine tool sales or upselling parts and upgrades, • Additional certifications in electronics, hydraulics, or mechanical systems, • Multilingual abilities, especially in languages relevant to international travel Preferred Education and Experience • Associate degree or equivalent in engineering, electronics, or a related field, • 4-8 years of experience in machine tool maintenance, installation, or servicing, or military technical training, • Prior experience with Fanuc CNC systems is a plus Other Requirements • Willingness and ability to travel domestically and internationally up to 85%, including potential trips to Canada and Mexico, • Valid driver’s license with a clean driving record and ability to drive personal vehicle as needed, • Ability to lift up to 50 pounds frequently and up to 75 pounds occasionally, • Ability to work in environments with loud noise, airborne particles, vibration, and varying temperatures, • Possession of or willingness to obtain a passport for potential international assignments Take the next step in your technical career—apply now and bring your expertise to a company that values innovation, dedication, and your growth!

Pay: $165,000.00 - $175,000.00 per year Job description: Overview We are seeking a Senior Manufacturing Engineer – Machine Safety for our client, a manufacturer in Irvington, NJ. The Senior Manufacturing Engineer – Machine Safety serves as the site owner and technical authority for the Machine Safety Program at the manufacturing facility. This position is responsible for leading machine safety, functional safety, machine risk assessments, and machine lifecycle management activities to ensure compliance with applicable U.S. regulatory requirements, recognized industry standards, and internal corporate standards. The role focuses on leading the Machine Guarding Program, conducting machine risk assessments, managing risk reduction and safeguarding projects, validating functional safety systems (PL/SIL), supporting capital equipment projects, and ensuring new and existing machinery meets safety requirements. It also supports Manufacturing Engineering through capital projects, equipment improvements, automation initiatives, troubleshooting, and continuous improvement efforts. Salary range $165,000-175,000/year, commensurate with experience Monday-Friday onsite Key Responsibilities • Own and lead the site's Machine Guarding Program and machine safety initiatives, collaborating with all stakeholders on cross-functional teams., • Conduct machine risk assessments and develop engineered risk reduction solutions., • Lead machine safeguarding, remediation, capital improvement projects, productivity enhancements, and equipment reliability initiatives., • Maintain ownership of the Site Master Machine List and ensure equipment inventories remain current and accurate., • Maintain ownership of the Priority Assessment List and establish prioritization criteria for machine assessments and remediation activities, • Validate functional safety systems, including Safety PLCs, PL/SIL calculations, and safeguarding solutions., • Develop, approve, and oversee corrective action strategies including equipment elimination, machine consolidation, machine upgrades, automation improvements, or new machine procurement., • Develop machine safety requirements for new equipment and participate in FAT, SAT, commissioning, and lifecycle management activities., • Lead machinery lifecycle management activities including installation, modification, relocation, modernization, and decommissioning., • Ensure compliance with OSHA, ANSI B11, NFPA 79, ISO 12100, ISO 13849, IEC 62061, and related standards., • Collaborate with the site machine safety team, train stakeholders, establish KPIs, and drive continuous program improvement, and root cause investigations., • Provide technical guidance to Engineering, Operations, Maintenance, and EHS., • Provide technical engineering support for troubleshooting, equipment modifications, and root cause investigations., • Provide periodic machine safety support to manufacturing facilities in Ohio and Puerto Rico. Requirements: Education • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Manufacturing Engineering, Industrial Engineering, Mechatronics Engineering, or related engineering or automation discipline. Certifications • Preferred but not required: TÜV Certified Machinery Safety Expert (CMSE®), TÜV Certified Safety and Machinery Expert (CSME®), or equivalent TÜV-recognized safety certification required., • Required: complete internal machinery safety certification program within 6 months of start date. Experience Bilingual Spanish preferred • Minimum 8–10 years of proven experience in manufacturing engineering, functional safety, automation engineering, or related manufacturing engineering functions required., • Demonstrated previous experience working in a mature, established, & operationalized EHS culture where manufacturing engineering was responsible for conforming to Management of Change, Machine Safety, and other EHS requirements., • Demonstrated previous experience utilizing influence and relationships to accomplish engineering or safety goals, objectives, and priorities., • Experience developing and executing capital improvement and remediation projects., • Experience working with, influencing, and managing equipment suppliers, integrators, and cross-functional teams., • Strong technical understanding of machine guarding and machinery safety principles., • Preferred but not required: demonstrated experience leading machine safety risk assessments and machine safeguarding and risk reduction projects and programs within a manufacturing environment.

About Flow-Turn: Flow-Turn is a global leader in the manufacturing of powered belt curves and spiral inclines/declines, based in Union, New Jersey. Since 1980, we have delivered simple, efficient, and reliable products to a diverse range of national and international customers. In 2011, the company was acquired by Hermann Miedel and rebranded to Flow-Turn. The Miedel family proudly runs operations at Flow-Turn. In 2024, Flow-Turn was recognized as a Minority-Owned Business. Position Summary: We are seeking an experienced Estimating and Costing Engineer to develop accurate estimates for conveyor curves and other material handling products and to help maintain, modernize, and expand Flow-Turn's Excel-based estimating and pricing platform. The ideal candidate combines strong metal manufacturing and cost-estimating knowledge with advanced Excel application development skills, including VBA programming, Power Query, complex formulas, structured data, and workbook integration. Salary: $85,000-$100,000 Key Responsibilities: • Prepare detailed cost estimates for conveyor curve and material handling products, including material, labor, machine time, and tooling costs., • Read and interpret engineering drawings, specifications, and bills of materials (BOMs) to price new and existing products., • Evaluate sheet metal fabrication, welding, machining, and assembly processes to determine accurate labor and manufacturing costs., • Review supplier quotes and work with Purchasing to keep material and outside-service costs current., • Maintain and improve the Excel/VBA estimating and pricing tool while keeping established costing logic intact., • Add new products, options, and features to the pricing tool using table-driven setups instead of hard-coded logic., • Use Excel formulas, structured tables, PivotTables, and Power Query to manage supplier data, material costs, and labor rates., • Troubleshoot VBA macros, linked workbooks, and data connections., • Document calculation methods so estimates are consistent and easy to review. Project Handoff and Collaboration • Create and validate detailed internal cost sheets for project review and approval., • Support project handoffs to Operations, Engineering, and Project Management., • Participate in project kickoff meetings. Required Qualifications • Bachelor's degree in Engineering, Construction Management, or a related field., • 5+ years of experience in cost estimating, engineering, or a related role within a manufacturing environment., • Hands-on experience in metal manufacturing, including fabrication, welding, machining, forming, or sheet metal processes., • Advanced Microsoft Excel expertise, including complex formulas, structured tables, named ranges, PivotTables, data validation, workbook architecture, and internal/external workbook references., • Advanced VBA application development experience required, including development and maintenance of large or business-critical Excel applications; reusable functions and procedures; Excel object model programming; arrays and dictionaries; event-driven code; error handling; debugging; and performance optimization., • Experience using Power Query to import, transform, combine, and refresh data from multiple sources., • Ability to read and interpret engineering drawings, specifications, and BOMs., • Strong analytical, problem-solving, and communication skills, with close attention to detail and accuracy. Preferred Qualifications • Experience estimating conveyor systems, curves, or other material handling equipment., • Experience designing configuration-based or rules-based estimating tools and improving legacy spreadsheet applications., • Familiarity with ERP/MRP systems and integrating estimating or costing tools with business systems., • Familiarity with SQL, Power BI, databases, APIs, or other data-integration technologies., • Experience with source control or structured software-development practices is a plus.

Our client is a globally known food manufacturer with multiple locations in the US. Due to growth, seeking a Plant Engineer to join the Engineering/Maintenance staff at the plant in NJ. Primary responsibilities include: • Implement and optimize automation and controls systems supporting high-speed packaging operations, improving reliability, efficiency, and production performance., • Program, troubleshoot, and maintain Allen-Bradley PLCs, FactoryTalk HMI/SCADA, and related industrial automation technologies., • Lead engineering projects from planning through implementation, coordinating budgets, vendors, contractors, and cross-functional teams to meet objectives., • Support maintenance by diagnosing electrical, mechanical, and controls issues while driving preventive maintenance and root cause corrective actions., • Ensure compliance with food safety, OSHA, and quality standards while leveraging SQL and automation data to improve operational performance. Position reports to VP of Operations. Ideal candidates for Plant Engineer will possess the following • Bachelors degree in Engineering, • LEAN Six Sigma certified a plus (LSSGB, LSSBB, etc.), • Experience with PLC's, SCADA and automation, • 6+ years experience in a food production or high-volume processing plant, • Understanding of OSHA standards and GMP Salary up to $120,000/yr. Benefits include medical, dental, vision, 401k, FSA, etc. Equal Opportunity Employer/Veterans/Disabled . To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to _ The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers *San Francisco Fair Chance Ordinance

Project Manager IV Location: Linden, NJ Description: We are seeking a Project Manager to lead routine, multi-disciplinary engineering capital projects from planning through closeout. This role suits a professional with a solid, general mechanical or civil/structural engineering background. Sample projects include pump replacements, equipment repairs/upgrades, and piping projects. This contract has the potential to be a multi-year assignment beyond the initial 2 years. Responsibilities May Include: • Assembling a full-time team to effectively execute the project, • Overseeing the preparation and implementation of the Project Execution Plan, • Leading the FEL process, completing gate reviews, and obtaining management approvals, • Leading the Contracting Strategy effort, managing the contractor evaluation, bid and award process, • Managing cost, schedule, procurement and the billing payables groups, • Interviewing and approving personnel from the contractor's organization, • Understanding contracts and managing contractors to maximize performance, controlling costs and minimizing claims and change orders, • Setting up project facilities at site and in the contractors office, • Setting safety expectations for the project and leading the team to achieve safety goals, • Ensuring plant Operations and Maintenance personal are engaged and that they understand their responsibilities, • Ensuring that proper schedules are issued, reviewed, and used to drive Project performance, • Ensuring the accuracy of the cost estimate as well as monthly cash flow forecasts, • Setting up programs to manage vendors, fabricators and any required specialty contractors, • Ensuring that quality processes are followed, • Developing, gaining approval for and managing to project KPI?s and metrics, • Leading development of a risk management plan, • Preparing and giving presentations to various levels of the Company and other stakeholders, • Timely and efficiently closing out of the project Position Requirements: Basic/Required: • Bachelor's Degree or higher in Engineering, • 10 or more years of project management experience working in the oil and gas or petrochemical industry, • 5 or more years of experience working as a Project Manager with sole accountability for the project Preferred: • 10 or more years of project management experience working in Refining and/or petrochemical, • 10 or more years of experience working as a Project Manager with sole accountability for the project, • Working knowledge of industry recommended practices, design methods and QA/QC requirements, • Working knowledge of federal, state and local regulations, industry standards and DOT requirements, • Experience managing engineering and construction contractors and multiple project teams, • Licensed Professional Engineer (PE), • Project Management Professional Certification (PMP)

Job Summary Miller’s Tug and Barge is seeking an experienced Port Engineer to oversee the maintenance, repair, and operational readiness of our fleet. This position ensures compliance with regulatory standards, manages preventive maintenance programs, and collaborates with vessel crews, management, and external vendors to maximize fleet efficiency and reliability. The Port Engineer will play a key role in planning and executing maintenance projects, supervising emergency repairs, and optimizing operational costs while upholding the highest safety and environmental standards. Key Responsibilities • Fleet Maintenance & Repairs, • Develop, implement, and oversee preventative maintenance programs for vessels., • Conduct inspections to ensure vessel safety, operational efficiency, and compliance with regulatory requirements., • Plan, manage, and oversee dry-docking and major shipyard repairs, including budgeting, scheduling, and execution., • Troubleshoot and assist with vessel mechanical, electrical, and hydraulic system issues., • Coordinate emergency repairs and casualty response efforts for the fleet., • Work closely with vessel crews to maintain and document daily operational and maintenance records., • Regulatory Compliance & Documentation, • Ensure vessels comply with USCG, ABS, OSHA, and EPA, requirements., • Maintain all necessary documentation for vessel certifications, inspections, and audits., • Assist in regulatory inspections and audits, ensuring corrective actions are completed as required., • Ensure compliance with environmental regulations and company policies., • Budgeting & Cost Management, • Develop and manage maintenance and repair budgets, ensuring cost-effective solutions., • Oversee procurement of spare parts, inventory control, and vendor negotiations., • Analyze maintenance trends and implement cost-saving initiatives., • Crew Training & Support, • Provide technical guidance and training to vessel engineers and crew on maintenance procedures, repairs, and safety protocols., • Assist in hiring, evaluating, and mentoring engineering staff., • Conduct safety training and promote a culture of operational excellence., • Operational Support, • Respond to vessel-related issues 24/7 as needed., • Support fleet operations by ensuring vessels are maintained and available for deployment., • Work closely with operations and marine personnel to optimize fleet performance. Required Qualifications • Bachelor’s degree in Marine Engineering, Mechanical Engineering, or a related field preferred., • Minimum of 5 years’ experience in vessel maintenance and repair, preferably on tugs, OSVs, Crew Boats or barges., • USCG Merchant Mariner Credential (DDE Unlimited or higher preferred)., • Strong knowledge of Subchapters I, L, M, T, dry docking, shipyard operations, and regulatory compliance., • Experience managing budgets, cost analysis, and procurement., • Proficiency in Microsoft Office Suite, maintenance tracking software (e.g., Helm, or AutoCad)., • Valid TWIC card or ability to obtain one., • Strong problem-solving, analytical, and decision-making skills., • Ability to work independently and as part of a team., • Physically capable of boarding vessels, climbing ladders, and working in marine environments. Work Environment & Conditions • Work will be performed in an office, shipyard, and onboard vessels., • Must be able to travel and work flexible hours, including nights, weekends, and emergency call-outs., • Exposure to marine environments, including extreme weather conditions, confined spaces, and mechanical hazards. Why Join Miller’s Tug and Barge? • Competitive salary and benefits package., • Work with an experienced and dedicated marine operations team., • Opportunity to make a significant impact on a growing fleet., • Dynamic and hands-on work environment., • If you are an experienced marine engineer with a passion for vessel maintenance and operational excellence, we invite you to apply!

Summary / Objective: The Key Account Manager (Sales Engineer) is an entry level sales engineer responsible for developing strategic partnerships with key customers by combining engineering expertise with consultative sales leadership. This position serves as the primary advisor for assigned accounts, driving sales of products which improve customer manufacturing processes, increase operational efficiency, and optimize application performance through Habasit's engineered solutions. The Key Account Manager works closely with Engineering, Product Management, Technical Services and Operations to design application-specific solutions, support complex projects, and drive sustainable business growth through innovation and value-based selling. Habasit will provide technical and commercial onboarding training at our facilities in Suwanee, GA. (4-6 weeks) Essential Functions: In accordance with the Americans with Disabilities Act, reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. Sales & Engineering Support • Develop a strong understanding of assigned customers, their equipment, manufacturing processes, and business needs., • Recommend Habasit conveying and power transmission products that address customer applications and improve productivity, reliability, and operating performance., • Conduct customer visits, application reviews, product demonstrations, troubleshooting, and basic process assessments., • Identify opportunities for product replacements, upgrades, improvements, and competitive conversions. • Support product installation, commissioning, start-up, and implementation activities as needed. • Work with Technical Services and Engineering to address customer application requirements and develop appropriate solutions. • Develop new business within existing accounts and identify opportunities with new customers. Strategic Account Management • Develop and maintain strong relationships with engineering, maintenance, operations, purchasing, and other key customer contacts., • Support account plans focused on customer retention, growth, and long-term partnership., • Identify opportunities related to new equipment, production lines, process improvements, automation, and capital investments. • Prepare quotations and support pricing and commercial discussions in accordance with company guidelines. • Maintain an accurate opportunity pipeline and customer information using CRM tools, including Sugar CRM. • Follow up on customer opportunities and ensure appropriate internal resources are engaged. Cross-Functional Collaboration • Work with Product Management to identify customer needs and recommend appropriate products and solutions., • Partner with Customer Care, Manufacturing, Supply Chain, Quality, Operations, Engineering, and Technical Services to support customer requirements. • Communicate customer feedback, product requirements, competitive information, and market trends to appropriate internal teams., • Participate in customer problem-solving, failure analysis, continuous improvement, and Voice of Customer activities. Industry & Technical Leadership • Remain current on conveyor technology, polymer materials, power transmission systems, manufacturing processes, and emerging automation technologies. • Represent Habasit during seminars, customer training sessions, trade shows, and industry conferences. • Deliver technical presentations and educational workshops for customers, distributors, and internal teams. • Promote industry best practices, innovation, sustainability, and continuous improvement throughout customer engagements. Required Skills / Abilities: • Strong technical aptitude with basic understanding of mechanical systems, manufacturing processes, and industrial equipment. • Ability to understand and interpret basic engineering drawings, specifications, and technical documentation. • Strong customer service mindset., • Ability to understand complex problems and develop practical solutions., • Strong verbal, written, and presentation skills., • Ability to explain technical information clearly to both technical and non-technical audiences. • Strong analytical and problem-solving skills., • Proficiency in Microsoft Office applications., • Strong organizational and follow-up skills., • Ability to work independently while collaborating effectively with internal teams. Supervisory Responsibility: This position does not typically supervise staff. Work Environment: This position operates in a professional office environment with frequent exposure to manufacturing settings and customer facilities. The role may include exposure to forklift traffic, equipment noise, and production processes. Physical Demands: • Prolonged periods of sitting, standing, and walking., • Frequent use of hands and arms for handling product samples and presentations., • Must be able to lift up to 20 lbs. occasionally (up to 40 lbs. in some assignments)., • Required to safely operate a motor vehicle in varied conditions. Position Type and Expected Hours of Work: Full-time, Monday through Friday, 8:00 AM to 5:00 PM. Evening and weekend work may be required to meet customer demands, project deadlines, or trade show schedules. Travel: Extensive travel (up to 50%) is expected, including overnight stays for customer visits, trade shows, training, and business meetings. Required Education and Experience: • Bachelor's degree in Engineering., • Equivalent combination of education, technical training, and relevant experience may be considered. • Experience in technical sales or application engineering., • Experience with conveyor systems, power transmission, industrial automation, or engineered products. • Experience working with manufacturing customers., • Experience with CRM systems and structured sales processes., • Exposure to complex sales cycles and multiple customer stakeholders., • Up to 4 years of experience in technical sales, application engineering, manufacturing, industrial products, conveyor systems, power transmission, or a related field. • Experience working with OEMs, manufacturers, distributors, or industrial end users preferred. • Demonstrated ability to develop customer relationships and identify sales opportunities. • Experience working with technical products or industrial applications preferred Other Duties: This job description is not designed to cover all activities, duties, or responsibilities. Duties may change at any time with or without notice. Employment with Habasit America is at-will. Habasit America is an equal opportunity employer and does not discriminate based on race, color, age, sex, sexual orientation, gender identity, religion, disability, national origin, veteran status, or any other legally protected status.

About Quantiphi: Quantiphi is an award-winning, AI-First global digital engineering company that helps the world’s leading Fortune 1000 organizations transform bold ideas into measurable business impact. We go beyond building innovative AI technologies—we solve the problems that matter most to our clients. Since our founding in 2013, Quantiphi has built a proven track record of turning complex challenges into meaningful outcomes across industries. Headquartered in Boston, with more than 4,000 professionals worldwide, we partner with global enterprises to deliver large-scale digital, cloud, and AI-driven transformation. #SolvingWhatMatters. We are an Elite and Premier partner to Google Cloud, AWS, NVIDIA, Snowflake, and other leading technology platforms, and our work has been recognized across the industry, including: • 3 AWS AI/ML Partner of the Year awards, • 3 NVIDIA Partner of the Year awards, • 3 Snowflake Partner of the Year awards, • Rated Leaders by Gartner, Forrester, IDC, ISG, Everest Group and other leading analyst firms Quantiphi delivers First-in-class AI solutions across Life Sciences, Healthcare, Banking, Financial Services, CPG, Manufacturing, Energy, High-Tech, Telecommunications, etc., powered by cutting-edge Generative AI and Agentic AI accelerators. We are also proud to be certified as a Great Place to Work—reflecting our commitment to our people and our culture. For more details, visit: or Role: Gen AI Architect Experience Level: 7+ years Employment type: Full Time Location: Newark, NJ Job Summary: We are seeking an experienced Senior Machine Learning Engineer to architect, build, and deploy production-grade agentic AI systems and multi-agent workflows from the ground up. The ideal candidate will have deep expertise in designing autonomous AI systems that can collaborate, reason, and execute complex tasks with minimal human intervention. You will be responsible for creating scalable, robust agentic workflows using cutting-edge frameworks like CrewAI/Langraph, while ensuring enterprise-grade deployment on major cloud platforms. Roles & Responsibilities: Agentic System Architecture & Development: • Architect & Build Agentic Systems: Design and develop end-to-end multi-agent systems from scratch. You will create the foundational agent harnesses, define communication protocols, and build orchestration layers using frameworks like CrewAI, Langgraph, and AutoGen. Architectural decisions to ensure:, • Hierarchical and collaborative multi-agent structures with well-defined agent roles, responsibilities, and communication protocols, • Dynamic task decomposition, sophisticated tool integration, planning mechanisms (ReAct), and self-correction loops, • Develop state management systems and memory mechanisms for persistent agent interactions, • Engineer Advanced Agent Capabilities: Develop custom agent-tools and define specialized agent-skills that empower agents to perform complex, domain-specific tasks., • Pioneer Context Engineering: Implement advanced context engineering and memory systems to ensure agents maintain state, learn from interactions, and make informed decisions in dynamic environments., • Deploy Production-Grade Solutions: Own the deployment, scaling, and maintenance of robust, low-latency agentic systems on major cloud platforms (GCP, AWS, or Azure). You will implement best-in-class MLOps practices for monitoring, continuous integration/continuous deployment (CI/CD), and system reliability., • Integrate and Optimize LLMs: Integrate LLMs to serve as the core reasoning engines for autonomous agents. You will apply advanced techniques like RAG and PEFT to optimize performance. Tool Development & RAG Integration: • Create and maintain comprehensive tool libraries for agents including API integrations, database queries, and external service connections, • Design and implement RAG systems using vector databases (Pinecone, Weaviate, ChromaDB), • Develop custom tools and plugins that enable agents to interact with various enterprise systems and APIs, • Ensure tool reliability, error handling, and seamless integration within agentic workflows Observability, Monitoring & Evaluation: • Implement comprehensive monitoring and tracing systems for agent behavior, performance, cost optimization, and latency analysis, • Design novel evaluation frameworks to assess multi-step agentic task success, reliability, and accuracy, • Utilize advanced observability tools (LangSmith, Arize AI, or custom solutions) to trace agent decision making processes, • Establish metrics and KPIs for measuring agentic system performance in production environments Basic Qualifications: • 6-8 years of hands on experience in machine learning and AI engineering with proven track record of taking ML systems to production, • Demonstrated expertise in building multi-agent systems and agentic workflows, preferably with Langraph/CrewAI, • Programming & ML: Expert-level Python proficiency with ML frameworks (TensorFlow, PyTorch, Transformers). Experience with FastAPI, async programming, and microservices architecture, • Data & Vector Systems: Hands-on experience with vector databases (Pinecone, Weaviate, ChromaDB) and building scalable RAG systems, • Monitoring & Observability: Experience with LLM application monitoring tools (LangSmith, Weights & Biases, custom telemetry solutions), • Proven ability to architect and implement complex AI systems from scratch in production environments, • Cloud Platform Expertise: Production-level experience with at least one major cloud platform (AWS, GCP, or Azure), including:, • Compute services (EC2, GCE, Azure VMs), • Serverless functions (Lambda, Cloud Functions, Azure Functions), • Container orchestration (EKS, GKE, AKS), • Managed AI/ML services (SageMaker, Vertex AI, Azure ML), • Production & DevOps: Strong skills in Infrastructure as Code (Terraform, CloudFormation), CI/CD pipelines (GitHub Actions, Jenkins), and containerization (Docker, Kubernetes) Other Qualifications: • Experience with prompt engineering techniques, fine-tuning SLMs (PEFT, SFT, RLHF), and model optimization, • Knowledge of distributed systems, message queues, and event-driven architectures for agent coordination, • Familiarity with SDLC best practices, version control (Git), and agile development methodologies, • Experience with tool-calling agents, multi-step workflows, and stateful orchestration (e.g. graphs, planners, routers)., • Hands-on evals for agents: trajectory / tool-use checks, golden traces, LLM-as-judge with fixed rubrics, regression suites., • Online evals, drift thinking, and clear quality gates before or after deploy (thresholds, alerts, rollback criteria)., • Safety and abuse: prompt injection via tools, untrusted retrieval, PII handling in prompts and logs, allowlists and guardrails., • Cost and latency discipline: budgets per run, timeouts, caps on turns and tool calls., • Model lifecycle: routing / gateway patterns, version pinning, fallbacks, and which model for which step., • Memory and state: what is persisted, retention, redaction, and what must never be stored What is in it for you: • Join one of the world’s fastest-growing AI-first digital engineering companies and make a real impact at scale., • Lead and collaborate with a high-energy team of talented, driven individuals solving complex, meaningful challenges., • Work with Fortune 500 companies and disruptive innovators in a research-driven environment with 60+ patents., • Stay ahead of the curve by gaining hands-on experience with cutting-edge AI, ML, data, and cloud technologies while continuously upskilling.

Job Description Maintenance Technician (Full-time 40 hours per week) Northeast Capital Group Iselin, NJ Full-time Full job description POSITION SUMMARY The Maintenance Technician is responsible for assisting with the overall facilities maintenance under the direction of the Property Manager. ESSENTIAL FUNCTIONS The position requires performance in a wide range of areas to the buildings, grounds, and equipment. It requires a working knowledge of the plumbing, electrical, carpentry, HVAC, appliance repair, grounds maintenance, painting, flooring, etc. These functions are not limited to the following areas: • Completion of work orders in a timely basis., • Routine inspections of all common areas, amenities, systems closets, maintenance shop and grounds, and keeping all areas clean and sanitary., • Ordering supplies and tracking inventory., • Escorting / providing access to third party vendors for service calls and inspections, • Coordinating with Property Manager for any building inspections and follow-up with work orders to repair all deficiencies found., • Upon notification from the Property Manager, be available for emergency duty, such as in case of a fire or any other emergencies as defined by Management., • Completing any incident reports within 24 hours of occurrence (i.e. injuries, property damage, disturbances, etc.), • Accepting maintenance requests only from Property Manager., • Preventative Maintenance and Inspections of fire equipment and roofs QUALIFICATIONS: SKILLS & ABILITIES • 3 years’ experience in all facets of property maintenance, • High School graduate or equivalent, • Knowledge in plumbing, HVAC, electrical, carpentry, appliance repair, maintenance, grounds maintenance, roofing, flooring, etc. or the ability to learn this skill, • Ability to communicate both orally and in writing with a wide range of people, • Ability to accept responsibility and account for his/her action, • Trait of being dependable and trustworthy, • Ability to utilize available time to organize and complete work within given deadlines, • Ability to work at a sustained pace and produce quality work, • Required to assist on an on‐call rotation schedule, • Use of the proper safety equipment; gloves, goggles, back belts and proper footwear required, • Must have a valid driver’s license and vehicle to travel to both properties. Physical Requirements · Must be ab le to read reports, maintenance documentation and use a computer · Must be able to hear in order to communicate effectively with co-workers and supervisors. · Stand/Walk- Must be able to stand for extended period and walk throughout the properties to complete maintenance tasks and inspections · Climbing/Bending/Kneeling-Must be able to perform maintenance activities that require climbing, bending, stooping, and kneeling. · Lift/Push/Pull-Must be able to routinely lift and move 50+ pounds · Dexterity/Grasping/Feeling-Must be able to safely use hand tools, power tools, and maintenance equipment. · Working on ladders at varying heights Work Environment: · Must follow all safety procedures and wear required PPE · May be exposed to varying temperatures and outdoor conditions while performing maintenance tasks. \nCompany Description NECG is a well-established, full-service commercial real estate firm with a strong presence in the industry. This position offers the opportunity to be part of a team that values excellence and provides long-term career growth and development opportunities in the real estate industry. NECG is a well-established, full-service commercial real estate firm with a strong presence in the industry. This position offers the opportunity to be part of a team that values excellence and provides long-term career growth and development opportunities in the real estate industry.

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance., • Look for opportunities to help work get done safer, faster and more cost effectively. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws

Job Description Overview Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here’s what Transcat has to offer— • Work that matters., • A values-based culture where people care about each other and the work they do together., • Flexibility., • Training and development to accelerate learning and career advancement., • Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! We are Searching for— A CMMS Engineer, to support our clients with activities related to the use, operation, migration, or analysis of their Computerized Maintenance Management Systems (CMMS). This is a on-site position with occasional travel up to 25% of the time. You will report directly to our CMMS Service Lead. Responsibilities Essential Duties and Responsibilities— • Project/ Migration, • Perform field walkdowns to verify the accuracy of the equipment data., • Carry out all technical data reviews and data entries in the system., • Translate and cleanse raw data in preparation for Data Migration., • Assist in the preparation of client project status reports and immediately communicate project deviations or delays to the Project Manager., • Meet regularly with all stakeholders to discuss progress, communicate changes, and support the entire change effort., • Assist with other continuous improvement and optimization projects, as required., • BI/ Optimization, • Extract and analyze data using business intelligence tools to aid business decisions., • CMMS Support, • Provide support to end-users in navigating and utilizing the CMMS., • Input and maintain asset and equipment data in the CMMS., • Track client requests and assist with metric and key performance indicators (KPI) reporting., • Other duties as assigned. Qualifications Required Knowledge, Skills and Abilities: • Preferred: Associate degree in a STEM field, or trade certification in instrumentation, mechanical, electrical, or related engineering field., • 1 -3 years’ experience in CMMS-related work (front end). Life Science experience preferred but not required., • Experience with either SAP or Hexagon., • Proficient in MS Office platforms, particularly MS Excel. BI Tool knowledge a distinct advantage., • Familiarity with data management processes (paper-based / digital change control processes)., • Ability to perform field verification / data collection for assets to be added to / changed on the CMMS., • Ability to complete projects on time that meet our quality standards., • Ability to quickly understand new software platforms., • Ability to build data for CMMS systems to the highest level of quality (averaging zero errors consistently)., • Able to travel up to 25% of the time. If this sounds like you, apply today! Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.

Job DescriptionSummary:As the employee becomes qualified through acquired experience and training performs the work required in the construction, operation, maintenance, and removal of transmission and distribution lines on wood poles, including work on iron poles, isolated towers and mats or vaults, which may be energized but not above 13-kV primary distribution voltage. Check general operation of assigned vehicle and associated equipment and perform other similar or less skilled work of the occupational group. Incumbent will be expected to respond to off hour work (i.e., schedule and call out / standby for regular work and storms and may be required to work shifts outside the normal workday filling in for Trouble-shooters in operations.). Metropolitan Electric Division which has a main Headquarters in Clifton and a Sub Headquarters in Irvington. Assigned work location could be Clifton or Irvington depending on workload and business need. Sign on bonus available for qualified applicants who successfully complete the pre-employment process and meet the time requirement for bonus eligibility. Hire must stay in Fully Qualified Lineperson or Troubleshooter classification for 24 Months to retain Hiring Bonus. Hiring Bonus paid out after 12 months of employment. Job Responsibilities: • Perform work on de-energized lines and assists Linemen/Linewomen on energized secondary lines., • Transfer construction, change insulators, cross arms, pins, and make other similar repairs on energized 13kV pole line transmission circuits., • Construct, install, remove and maintain items such as, but not limited to: Poles, crossarms, guy wires, and line hardware., • Install, sag, remove and maintain line conductors including splicing, tapping, and the making of dead ends; install, remove and maintain messengers; install and remove aerial cables and cable laterals on poles., • Trim trees., • Make complete inspections of construction performing such work as tighten hardware, tie in conductors, and change insulators and pins., • Make voltage and load tests on energized distribution circuits or equipment., • Locate faults on 13 and 26 kV transmission and on distribution circuits, including associated equipment., • Under the supervision of an engineer or supervisor, make special tests on distribution equipment and phase-out or parallel distribution circuits and equipment., • Perform any work required on isolated towers, install, remove and maintain distribution, 13 and 26 kV conductors and accessories on tower lines., • Serve as Troubleshooter., • Replace secondary fuses on poles or on customers’ installations., • Perform other similar or less skilled work of the occupational group. Job Qualifications:Must meet the Company's "General Requirements"; and in addition: • High School Diploma or GED Required., • Need to have successfully completed a recognized apprentice program and be a first class journeyman lineperson. Be able to perform maintenance and repair work safely and without causing interruption to service., • Have a good practical knowledge of the purpose and functioning of the overhead transmission and distribution system, and the electrical apparatus used in connection therewith; and a general knowledge of the layout of transmission and distribution circuits in the area in which he/she works., • Become familiar with the procedure and rules governing the ordering out, tagging and releasing of circuits and the Company's system of circuit designation for identification., • Acquire a good working knowledge of the Company's overhead line construction methods and practices. Be proficient in the application of pole top resuscitation, and other approved methods of artificial respiration., • Be alert in avoiding accidents and observing hazards. Be approved by the Joint Employee Qualification Committee after passing the written tests and physical assessments, DOT Physical Examination, and Background investigation/Drug Screening., • Be able to follow instructions and perform routine operations. Have mechanical aptitude. Have the physical characteristics to enable him/her to climb and work on structures and poles., • Know how to read construction prints and make simple field sketches. Understand the application of hoists, tackle, and knots used in line construction and maintenance work and the care of tools commonly used in line construction and maintenance work., • Know how to identify and use all material, tools, and equipment commonly used on line work., • Prepare for and pass the Class ‘A’ CDL driving test within the first year of employment., • Provide certifications and licenses. DOT testing is required for this safety-sensitive position., • Must possess a U.S. driver’s license and maintain a satisfactory driving record., • This is a safety-sensitive position. DOT testing is required. Desired: • A valid Class ‘A’ Commercial Driving License (CDL) but a valid Class ‘B’ CDL candidate (21 years or older) will be considered.

Job Description Genesis Technical Staffing is seeking project engineers for onsite roles in multiple states: Bayway, NJ—Ponca City, OK—Borger, TX—Sweeny, TX—Rodeo, CA—Ferndale, WA—Billings, MT The On-Site Project Engineer will serve as a permanent, on-site representative and the primary day-to-day interface between local site personnel and office execution teams. This individual will facilitate the integration of project execution activities between the sites and support the development of new project scopes, and provide on-site coordination to improve alignment, responsiveness, and overall project delivery. Key Responsibilities • Act as the primary on-site liaison between local client staff and the client’s engineering, project management, and support personnel., • Facilitate efficient communication, coordination, and issue resolution between refinery stakeholders and other offices., • Support integration of project execution activities across engineering, procurement, construction, and site operations., • Support Management of Change (MOC) coordination activities by helping track, communicate, and facilitate required inputs, reviews, and approvals between site personnel and the client’s other teams., • Assist in identifying, developing, and defining new project scope opportunities in coordination with client personnel., • Coordinate field information gathering, site walkthroughs, and scope validation to support development of project deliverables, estimates, and execution plans., • Help align project priorities, technical requirements, schedules, and work processes between client personnel and project teams., • Provide on-site input to improve constructability, operability, maintainability, and overall execution readiness for proposed and active work., • Monitor project interfaces, communicate emerging concerns, and help drive timely decisions to minimize delays, rework, and execution risk., • Participate in client meetings, planning sessions, scope reviews, and other project coordination activities as required., • Maintain strong working relationships with the site operations, maintenance, engineering, and project stakeholders while representing the client in a professional manner., • Support safe work practices and ensure coordination efforts are consistent with site requirements., • Provide regular status updates to the client’s leadership regarding project opportunities, execution issues, priorities, and client coordination needs., • Perform as Project Manager for small projects. Qualifications • Bachelor’s degree in Engineering, Construction Management, • Five plus years (preferred) of demonstrated experience as a Project Engineer, Project Manager, or similar project execution role in refining, petrochemical, or industrial facilities., • Strong understanding of brownfield project execution, field coordination, and owner-contractor interface management., • Ability to develop project scopes and support early project planning activities., • Strong communication, organization, and relationship management skills., • Ability to work effectively with site operations, maintenance, engineering, and contractor personnel., • Working knowledge of project controls, schedule coordination, and execution planning is preferred., • Commitment to safety, quality, and responsive client service., • Ability to work independently with remote supervision. Self-starter., • Must be willing and able to work in the field., • All candidates must pass background checks, drug screening, and qualify for issuance of TWIC credentials.\nCompany Description At Genesis, we love people. Our mission is to be a blessing in all we do while putting people to work. We specialize in partnering with candidates and clients to bring the right people together to accomplish great things. Genesis Staffing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Genesis Staffing and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at https://gtstaffing.com/privacy-policy/ At Genesis, we love people. Our mission is to be a blessing in all we do while putting people to work. We specialize in partnering with candidates and clients to bring the right people together to accomplish great things.\r\n\r\nGenesis Staffing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.\r\n\r\nBy applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Genesis Staffing and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at https://gtstaffing.com/privacy-policy/

Job DescriptionCompany Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities. Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the college completion gap and preparing every student for college and beyond. Our students consistently exceed national benchmarks, reflecting our dedication to their success. We invest deeply in our educators, offering weekly coaching, feedback, and professional development to ensure excellence in teaching and leadership. Join us to work hard, do good, and make a lasting difference! Job Description Uncommon Schools is seeking a HVAC Operating Engineer to join the charter network’s New Jersey Facilities team. This position provides an opportunity for an experienced HVAC Operating Engineer with at least seven (7) years' relevant experience to work with a dedicated facilities group, deepen his/her technical skills, and help ensure that Uncommon provides well-maintained, comfortable, and safe educational facilities for our students and staff. Uncommon’s portfolio in New Jersey comprises buildings constructed from the very early 1900s through the early 2020s, operating HVAC systems dating from 1966 to the recent past few years. As ambient comfort is essential to a productive learning and teaching environment, the impact of this individual’s attentiveness will be felt and deeply appreciated across the region. Reporting to the Senior Manager, Facilities Management Team, the HVAC Operating Engineer will perform all technical work necessary to inspect, maintain, repair, and modify HVAC system in our buildings. With expertise in HVAC – and to a lesser extent in construction and plumbing – in multi-family, schools, and commercial buildings, the successful candidate will be responsible for conducting minor HVAC projects and managing larger ones and ensuring they are completed on time and within budget. The HVAC Operating Engineer will partner with senior Facilities team members and outside consultants on the planning, coordination, and supervision of mechanical construction and repair activities implemented by outside vendors, will ensure project timelines are met and ensure quality control standards are followed, mentor junior staff, and handle all HVAC-related communication with stakeholders. Uncommon values candidates who have the drive and ability to work hard, are highly self-motivated, are eager to take on and implement assignments and projects, and have a strong commitment to customer service and satisfaction. Safe, efficient, healthy, clean, comfortable, and reliable buildings are essential to Uncommon’s mission to deliver an excellent education to our students and a comfortable working environment to our dedicated staff. As a member of the NJ Facilities Team, the HVAC Operating Engineer will: • maintain current knowledge of the National Standard HVAC Code and other applicable building codes and perform all facets of the HVAC trade in accordance with those codes and in a safe and effective manner, • diagnose problems with HVAC systems, evaluate solutions to remedy issues, and provide sound recommendations to supervisors, • in emergency situations take immediate steps to contain the problem and restore the system to sound working condition, • in emergency situations maintain clear and consistent communication with stakeholders to apprise them of steps being taken to address the issue, • troubleshoot and repair all HVAC type systems currently available in the market, • maintain records of corrective and preventive work assignments received through an automated work order system (currently SchoolDude, soon ZenDesk), • assist onsite Facilities Managers and General Maintenance Workers with work projects or special assignments, • respond to campus emergency calls after hours as needed, • perform other duties as assignedQualifications Required Technical Skills: • Significant journeyman-level HVAC experience along with the trade knowledge to effectively understand and perform all facets of the HVAC trade in accordance with the National Standard Plumbing Code and other applicable codes, • Strong background in commercial heating projects large and small, including hot water boilers and gas furnaces, • Ability to read as-built plans for all buildings in portfolio, • Ability to read and interpret construction drawings, specifications, submittals, cut sheets, layouts, technical manuals, schematic drawings, and other HVAC-related trade documents, • Advanced knowledge of BMS systems and system operations, • Ability to procure replacement parts as needed to make all necessary repairs, • Ability to properly and safely use the tools of the trade and carry out all tasks expected of a Snr. HVAC Technician, • Ability to troubleshoot and repair refrigerant-driven cooling and heating equipment (heat pump systems), • Ability to troubleshoot and repair water-driven heating and cooling equipment, • Ability to troubleshoot and repair water or glycol pump systems, • Ability to troubleshoot and service chillers and cooling towers, • Ability to change filters and belts and clean coils as needed to ensure proper functioning of units, • Ability to troubleshoot and implement recommended repair/replacement of, • gas valves, • economizer motors and dampers, • compressors and contactors, • dampers, • chilled water and hot water pumps, • glycol injection units, • Ability to evacuate and top-off units with refrigerant General Technical Skills • Bachelor’s Degree equivalent or seven plus (7+) years of experience in the HVAC field, • Evidence of progressive responsibility and experience in HVAC field, with four plus (4+) years as head technician, • Ability to handle multiple projects simultaneously, • Familiarity with key building systems (HVAC, electrical, mechanical, plumbing), • Familiarity with OSHA and other Life Safety codes, etc., • Computer skills necessary to operate BMS system, • Facility with Microsoft office suite, • Strong organizational skills, attention to detail, and follow-through, • Ability to communicate effectively verbally and electronically with facilities staff, school staff, and vendors, • Available to work nights and weekends when necessary, • Extreme flexibility, with a strong work ethic and an entrepreneurial spirit to accommodate high level of responsibility and multiple priorities, • New Jersey low pressure black seal boiler, HVAC or other certificate, training, or licenses a plus, • Carry a current EPA card enabling technician to dispense of refrigerants, • Valid driver’s license and vehicle, • Strong capacity to operate independently Physical Requirements • The physical requirements outlined below are representative of those that must be met by an employee to successfully perform the essential functions of this position., • Stand or walk for up to two (2) hours at one time, up to eight (8) hours per day, • Sit for fewer than two (2) hours during an eight (8)-hour day, • Lift or carry up to 35 pounds frequently and 100 pounds occasionally, • Lift up to 100 pounds to waist height and up to 35 pounds in a range of motions from floor to overhead, • Frequently use hands for simple grasping, fine manipulation, pushing or pulling, • Occasionally climb stairs or ladders, dig, or pull with forces up to 100 pounds, • Frequently bend, squat, kneel, knee stand, lift overhead, reach overhead, push, or pull, • Work outdoors in a variety of temperatures and environmental conditions, • Possess ability to work at heights, full range of body motions and physical agility, and ability to maintain balance Mission Alignment • Demonstrate a relentless drive to improve the minds and lives of students in and out of school, • Demonstrate a commitment to the schools’ rules, regulations, and safety procedures, • Implement and enhance the school’s systems and culture Create high accountability for oneself as well as for building staff and vendors #ZR Additional Information Our people are what make us Uncommon. We offer competitive compensation and comprehensive benefits that support the personal health, wellness, and finances of our staff and their families. Our compensation philosophy values equity & fairness and attracting & retaining top talent. Compensation Compensation for this role is between $43/hr to $50/hr. Starting pay is determined using various factors including but not limited to relevant professional experience, education, certifications, and tenure with Uncommon Schools. Benefits • Regional staff will have the same holidays and sustainability days as school-based staff in their region, and flexible summer PTO, • Extensive, best-in-class training and development, • Comprehensive health, dental, and vision insurance plans + pre-tax flexible spending (FSA), dependent care (DCFSA), and health saving accounts (HSA), • Financial Planning, • New Jersey Pension program, • Paid leave of absence options (parental, medical, disability, etc.), • Mental health and counseling support + wellness benefits *A detailed list of all benefits is located HERE. At Uncommon, we believe that a supportive and welcoming environment helps our students, staff, and community thrive. We are dedicated to building a team that brings a wide range of perspectives and experiences, reflective of the communities we serve---with over 70% of our staff identifying as people of color. Our organization values respect and open dialogue on important topics that shape our school culture. As an equal opportunity employer, Uncommon provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We also ensure that individuals with disabilities receive all privileges and benefits associated with employment and are provided reasonable accommodations for the interview process and to perform core job functions. If you would like to request an accommodation, please email recruitment@uncommonschools.org.

Job DescriptionManufacturing Quality Engineer Job Type: Full-Time Salary: $55,000 – $70,000 per year (Based on experience) Location: Springfield, NJ 07081 Position Overview We are seeking a Quality Engineer to improve manufacturing processes, reduce defects, investigate quality issues, and support continuous improvement initiatives within our manufacturing operations. The Quality Engineer will work closely with Production, Engineering, and Quality teams to improve product quality, enhance manufacturing performance, and ensure customer satisfaction. Key Responsibilities • Analyze quality data, scrap, rework, warranty claims, and customer complaints to identify improvement opportunities., • Investigate product and process issues using root cause analysis and implement corrective and preventive actions., • Support production by improving process capability, reducing variation, and enhancing manufacturing efficiency., • Conduct process audits and assist with customer and supplier quality issues., • Evaluate supplier quality performance and support new product introductions., • Maintain quality reports and track key performance indicators (KPIs)., • Collaborate with cross-functional teams to improve quality, efficiency, and customer satisfaction., • Support continuous improvement initiatives using Lean Manufacturing and quality improvement methodologies.Qualifications, • Bachelor’s degree in Engineering, Industrial Engineering, Manufacturing, or a related field preferred., • 3–5 years of Quality Engineering experience in a manufacturing environment., • Experience with manufacturing processes, quality systems, and process improvement initiatives., • Knowledge of Lean Manufacturing, Six Sigma, SPC, FMEA, and root cause analysis., • Strong analytical, communication, and problem-solving skills., • Proficient in Microsoft Office applications., • Bilingual English/Spanish preferred.Preferred Certifications, • Certified Quality Engineer (CQE), • Six Sigma Green Belt or Black BeltPhysical Requirements, • Ability to work on the manufacturing floor for extended periods., • Ability to occasionally lift up to 30 lbs., • Ability to work in a fast-paced manufacturing environment.Reporting StructureReports To: Director of Manufacturing or Plant Manager Works With: Production, Engineering, Maintenance, Purchasing, Customer Service, Suppliers, and Sales Teams

Job Description Job Summary The Mechanical Engineer I is responsible for performing research, development, design, and testing of product. Design work is monitored and reviewed by a senior level engineer. Primary Job Responsibilities • Work in a team environment to analyze requirements from the customer and develop design solutions, • Support on-site or remote factory production, • Complete 3D design of parts and assemblies, and create 2D part and assembly drawings using CAD software (SolidWorks/Inventor preferred), • Participates as a drawing checker to ensure items are detailed correctly, • Participates in engineering review meetings, • Communicates with suppliers/vendors as required, • Builds and analyzes prototypes, • Conduct laboratory testing of products to ensure compliance with customer requirements and regulatory standards, • Create Operation & Maintenance Manual and/or Installation Instructions for Products Qualifications • Bachelor’s degree in Mechanical Engineering; 2-5 years’ experience a plus, • Proficiency in using solid modeling CAD software (experience with Inventor a plus), • Proficient with MS office Products, • Ability to work to deadlines in a fast paced production environment, • Excellent oral and written communication skills Who are we Raycap, Inc. creates products that protect and support the world’s most valuable assets. We support advanced solutions for telecommunications, renewable energy, transportation, defense and other applications worldwide. What we offer • Excellent benefit package, • Paid Time Off from day one, • 10 company paid annual holidays, • Tuition Reimbursement program, • Generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, religion, gender identity, creed, veteran or military status, or other protected status. We participate in E-Verify for all employment verifications. Drug-free workplace.

Job Description About the Company & Role Our client is a leading global consultancy renowned for delivering high-profile, complex, iconic, large-scale capital projects. We're looking for a dynamic and motivated IT Infrastructure Engineer to join our growing team. In a full-time, permanent role, you will initially be working on the Hudson Tunnel Project. If you're excited to build real world experience in a modern, cloud first environment, this role gives you the foundation to grow fast. You'll serve as a senior technical resource to help maintain, secure, and improve the technology our client relies on every day. This position combines hands-on systems administration, advanced technical support, security operations, and project work across Microsoft 365, endpoint management, networking, and cloud infrastructure. As the IT Infrastructure Engineer, you will take ownership of complex issues, strengthen operational processes, and identify opportunities to improve reliability, security, and the employee experience. You will be resourceful and analytical, combining independent research, practical experience, and sound judgment to resolve unfamiliar problems. The busiest rail connection between New York, New Jersey, and the Northeast Corridor, the Hudson Tunnel Project will improve capacity, reliability, and resiliency of commuter and intercity rail transit serving 800,000 daily passengers from Washington, D.C. to New York and New England. This is a milestone project that is slated to receive nearly $12 billion in federal funding, the largest investment in a mass transit project in US history. This is a great opportunity for someone who enjoys both building technology and helping people use it effectively. Clear communication, thorough documentation, and a service-oriented approach are essential. What You'll Do: Systems Administration and Advanced Support • Administer and maintain the computer systems, cloud services, file services, and supporting infrastructure., • Provide Tier 2 and Tier 3 support for complex hardware, software, identity, connectivity, and application issues., • Investigate recurring incidents, identify root causes, and implement lasting improvements., • Support employee onboarding, role changes, and offboarding through timely device provisioning and access management., • Coordinate with employees, IT colleagues, and vendors to resolve issues and deliver technology projects. Endpoint and Identity Management • Manage Windows 11 endpoints, including deployment, configuration, and provisioning through Microsoft Intune and Windows Autopilot., • Maintain Dell hardware and other supported devices throughout their lifecycle, including inventory, replacement planning, and secure retirement., • Administer Microsoft Entra ID, security groups, role-based access, multifactor authentication, and Conditional Access., • Develop and maintain device compliance policies, configuration profiles, update rings, and application deployments., • Maintain Group Policy baselines and support the planned transition to modern device management where appropriate., • Support Apple device enrollment and management through Apple Business Manager and other device management platforms., • Maintain identity and provisioning integrations with HR systems, such as ADP Workforce Now or Workday, as applicable. Microsoft 365 Administration • Administer Exchange Online, Teams, SharePoint Online, OneDrive, and related Microsoft 365 services., • Manage service configuration, licensing, permissions, and operational health., • Partner with business stakeholders to improve collaboration, information access, and effective use of Microsoft 365., • Support the evaluation and governed adoption of Microsoft Copilot, Power Apps, Fabric, and Microsoft Foundry in partnership with relevant business and technical owners. Networking and Security • Administer Cisco Meraki infrastructure, including MX security appliances, switches, wireless access points, and cameras., • Monitor LAN, WAN, wireless, internet, and remote-access services for availability, performance, and security issues., • Maintain endpoint protection, firewall policies, secure configurations, and vulnerability remediation processes., • Investigate and respond to security alerts using tools such as Microsoft Defender, Microsoft Sentinel, Cisco Umbrella, and other monitoring platforms., • Apply least-privilege access and established security baselines across systems and endpoints., • Help employees recognize phishing attempts, suspicious requests, and other common security threats. Monitoring, Automation, and Patch Management • Use NinjaOne to monitor endpoints, manage patches, deploy software, and provide remote support., • Develop and maintain scripts and automated workflows that reduce repetitive work and improve consistency., • Establish patch baselines, maintenance windows, remediation procedures, and reporting., • Connect monitoring and alerting with ticketing processes to support timely investigation and resolution., • Evaluate changes for operational impact and maintain appropriate testing, documentation, and recovery procedures. IT Operations and Documentation • Manage incidents, service requests, and escalations through NinjaOne Ticketing or a comparable IT service management platform., • Create and maintain standard operating procedures, knowledge base articles, system documentation, and asset records., • Develop, maintain, and test disaster recovery and business continuity procedures in coordination with business stakeholders., • Maintain major-incident playbooks, escalation paths, and employee communication procedures., • Coordinate vendor support, service commitments, renewals, and statements of work for assigned platforms., • Support Global Relay administration and related retention or archiving requirements in coordination with designated business and compliance owners. Technical Leadership and Continuous Improvement • Provide technical guidance and mentorship to junior IT staff., • Lead assigned infrastructure and service improvement projects from planning through implementation and handoff., • Evaluate technologies such as Virtual Desktop Infrastructure and Azure Virtual Desktop based on business needs, security, cost, and support requirements., • Recommend improvements to system reliability, user experience, and IT efficiency., • Communicate technical risks, options, and recommendations clearly to IT leadership and business stakeholders. What You Bring: • At least 10 years of progressively responsible experience in systems administration, IT infrastructure, or a related hands-on technical role., • Strong experience administering Microsoft 365, including Entra ID, Intune, Exchange Online, Teams, and SharePoint Online., • Hands-on experience with Windows 11, Windows Autopilot, Dell hardware, endpoint configuration, and device lifecycle management., • Experience managing Cisco Meraki networking and security infrastructure., • Strong understanding of identity and access management, Conditional Access, multifactor authentication, security groups, and Group Policy., • Experience using NinjaOne or a comparable remote monitoring and management platform., • Experience with endpoint security, security monitoring, patch management, and incident investigation., • Demonstrated ability to provide Tier 2 and Tier 3 support and troubleshoot complex issues across endpoints, networks, and cloud services., • Ability to develop and maintain PowerShell scripts or comparable automation., • Strong documentation, organization, and prioritization skills., • Ability to explain technical concepts to employees with varying levels of technical knowledge., • Demonstrated ownership, sound judgment, attention to detail, and effectiveness during service disruptions. Preferred Qualifications • Experience with Apple Business Manager, Global Relay, and HR-driven identity or provisioning integrations., • Experience with Microsoft Sentinel, Microsoft Defender, Cisco Umbrella, or comparable security platforms., • Experience supporting Microsoft Copilot, Power Apps, Fabric, or Microsoft Foundry., • Experience implementing or supporting VDI or Azure Virtual Desktop., • Familiarity with ITIL practices, NIST frameworks, CIS Microsoft 365 Benchmarks, and CISA SCuBA guidance., • Relevant Microsoft, Cisco, CompTIA, security, or IT service management certifications., • Bachelor's degree in Information Technology, Computer Science, or a related field, or equivalent practical experience. What Success Looks Like • Employees receive responsive support and clear communication., • Systems and endpoints remain secure, reliable, and consistently maintained., • Access and device provisioning are accurate and timely throughout the employee lifecycle., • Recurring incidents and manual tasks decrease through root-cause resolution and automation., • Documentation and recovery procedures remain current and usable., • Technology projects deliver measurable improvements. Who You Are • Proactive: You take initiative and look for ways to help., • Growth-oriented: You're excited to learn and expand your technical skills., • Accountable: You take ownership and follow through with care., • Team-First: You collaborate naturally and support colleagues at all levels. Why Join Us You'll join a team that values learning, mentorship, and collaboration. This role gives you the chance to work with modern tools, build further IT skills, and contribute to meaningful projects. If you're eager to grow and ready for a new challenge, we'd love to connect. Platinum Global Talent Solutions is committed to providing equal employment opportunities to all qualified individuals. We refer candidates based on their qualifications and experience, without regard to race, color, religion, national origin, sex, age, disability, veteran status, or any other legally protected status.

Description We are seeking a Lead Transmission Line Engineer who will manage a collaborative and dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as a Lead Engineer and Technical Project Manager on high voltage electric transmission line design projects of overhead and underground systems for some of the largest utilities in the country as well as regional utilities. The candidate will apply NESC, ASCE, ACI, NEC, and other applicable standards in the engineering and design of all types of capital and maintenance projects from 34.5 kV to 765 kV. Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, foundation design using MFAD and/or LPILE, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. The successful candidate can expect a fast-paced, diverse work environment and flexible work hours/work arrangements as well as a manager and peers who will encourage career development and growth! In addition, the successful candidate will be involved in applying AI, automation, and digital design platforms to streamline grid modernization and increase design efficiency. This is a senior leadership role with primary responsibilities in client relations, staff management, proposal development, scope creation/change, project execution, and new business capture for the team’s full book of work. The successful candidate will be able to communicate clear expectations, goals, and vision; manage the performance of direct reports; motivate, coach, and mentor skilled professionals; and appropriately delegate project work. The candidate must be capable of managing collaboration and a positive team culture to achieve successful results. Location: This position is a hybrid work position with the potential for remote work for the right candidate located in Pennsylvania, Ohio, or West Virginia. Relocation assistance may be available for qualified candidates. The Challenge: • Direct multiple design teams simultaneously executing various projects and programs for multiple clients., • Develop a team of engineers by training, coaching, and nurturing Leidos’ engineering talent., • Supervise staff by approving timesheets and running the annual performance review process., • Participate proactively as a member of the leadership team of the Transmission Line Section., • Create responses to RFPs, RFIs, and RFQs from clients for new work, including proposal creation and definition of scope of work., • Possess a growth mindset to foster creative problem solving for our clients’ most complex issues., • Promote continuous improvement to develop streamlined processes and tools that facilitate improvements to departmental technical resources via innovation and automation., • Delegate tasks to staff, forecast and plan their future workload, and run recruiting activities to support aggressive growth goals., • Drive the quality control process for the execution team to ensure the highest level of quality in all deliverables., • Liaise with clients to maximize affinity, facilitate business development growth, and foster long-term relationship building., • Manage portfolio health by leveraging Project Managers to independently drive and monitor scope, schedule, and budget. Accountability for schedule compliance requires high awareness and support from assigned Lead Engineers. What Sets You Apart (Required): • Bachelor’s degree in Civil, preferred, or Mechanical Engineering with eight plus (8+) years of relevant experience in the design of high voltage electric utility transmission systems., • Expertise in PLS-CADD and PLS-POLE., • Engineer In Training (EIT) certification., • Work effectively in a team environment; can also work independently., • Track record of outstanding communication to serve as primary point of contact for existing and perspective clients., • Business acumen with a record of understanding and meeting key project performance metrics., • Working onsite in a Leidos or client office is a possibility; some periodic travel may be required., • Ability and passion to develop staff through mentoring. Favorable If You Have: • Two plus (2+) years of supervising staff., • M.S. degree in Structural Engineering., • Experience with TOWER., • P.E. certification or the ability to achieve P.E Certification in 6 months., • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus. Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PowerDelivery PDSTLINE If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. April 30, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit _. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at _. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at _. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the _. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what’s next. Let’s define tomorrow, together. At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they’re well taken care of and ready to get our customers to their desired destinations. If you’re ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. Key Responsibilities: • Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment, • Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision, • Journeyman electrical license a plus, • Requires the ability to make low and high voltage repairs to all building electrical equipment, • This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices, • You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors, • Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions, • Schedules are bid and awarded according to seniority, • Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT), • Salary increases will be administered according to the current IBT/United contract, • New employees are required to join the union within ninety (90) days of employment, • There is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local Lodge What’s needed to succeed: • Twenty Four months experience required in at least three of the following areas:, • Electrical (including 480 volt, 3 phase), • Structural (including steel frame construction), • HVAC (including building management systems), • Mechanical (including conveyors), • Plumbing, • PLC electronic/computer controls, • Must have completed high school diploma, GED or equivalent, • Ability to maintain and repair all building disciplines, heavy mechanical and welding, • Work may be indoors or outside or in elevated areas anywhere on airport, • Must be able to climb and work from ladders, and/or walk for extended periods, • Moderate lifting, • Must possess sufficient tooling to perform required tasks, • Computer experience for input and retrieval of data, • Qualified candidates must be immediately available for full time employment, • Must possess a valid, clean, applicable state driver's license What will help you propel from the pack (Preferred Qualifications): • Electronics diagnostics and troubleshooting The starting rate for this role is $34.52. United Airlines is an Equal Opportunity Employer. We recruit, employ, train, compensate, and promote without regard to race, color, religion, national origin, gender identity, sexual orientation, disability, age, veteran status, or any other protected category under applicable law. We provide reasonable accommodations for applicants and employees with disabilities. To request an accommodation, contact _

Description Company Description Hirsch is a global leader in security technology, specializing in physical access control, video intelligence, and digital identification systems. Our comprehensive solutions cover cybersecurity, physical security, video surveillance, and logical access control, offering our customers the highest levels of protection. Whether managing secure operations from anywhere or protecting identities from malicious attacks, we are committed to securing the future today. At Hirsch, we believe in the power of security, where physical access, video intelligence, and digital identification converge to protect the spaces and people that matter most. Our legacy spans over 43 years, earning us a reputation as a trusted partner in safeguarding everything from high-profile government buildings to local schools. We are more than just a security provider — we’re dedicated to creating a secure, connected world through digital innovation. In a small company, everyone matters, and everything we do matters. We believe having the best people in the most exciting, aligned, relevant and empowered roles with clear missions, goals and metrics, is the key to our success! Job Summary The Professional Service Systems Engineer works alongside technicians, technical support, other HPS engineers, and product managers to coordinate with the various Hirsch teams to deliver integration services and specialized support to Hirsch SLA customers. This particular role will act as a remote and onsite technical resource providing customer visibility, implementation services, scheduled and emergency maintenance services, advanced technical troubleshooting support, and problem resolution for our US and EMEA customers. Professional Service Systems Engineers must be able to manage hot issues by setting customer expectations, devising, and implementing action plans, being available as needed, and professionally communicating with all parties involved. Responsibilities and Duties · Provide hands-on involvement for technical installation and configuration of Hirsch products including troubleshooting, customer acceptance testing and completion documentation. · Conduct CSMS (Cybersecurity Management System) tasks, including deployment, implementation, monitoring, and improvement of security protocols. · Perform regular cybersecurity scanning, analyze vulnerabilities, and create detailed reports, and document findings and remediation steps. · Provide coaching for the customer-identified resource(s) who will be running day-to-day operation of the products. · Implement on-site solutions, while ensuring customer (partner and End User) satisfaction with Hirsch systems. · Serve as a technical authority on Hirsch product technologies via on-site, phone, and electronic media. · Provide technical support onsite, as well as via telephone, and electronic media. · Own and complete complex technical tasks for Hirsch clients including PoC engagements, within their pilot and production infrastructure. · Must be a US Citizen and be able to pass a federal background investigation as well as obtain and maintain a security clearance. · Act as a Trusted Advisor to customers. Requirements · Minimum 4 years of technical experience with Physical Access Control, Video, and Intrusion Detection Systems and/or related hardware/device · Hirsch product line knowledge · Ability to travel 50% and work remote · Experience with storage arrays including SAN and NAS solutions · Experience with virtualization technology including VM Ware or Microsoft Virtual Server. · Experience with Microsoft Cluster technology · Experience with government technical publications and implementation desired (HSPD-12, FISMA, FIPS-12, DISA, NIST, FICAM) · CISSP, MCSE/MCITP, CCNA, Security+, Network+ preferred. Will consider related field (or equivalent) experience · Working knowledge of the following systems: Windows Server 2012, 2016, 2019 and 2022 Windows 10, Windows 11. · Working knowledge of the following database system : SQL Server 2016, 2017, 2019 and 2022 · Working knowledge of Active Directory, Group Policy, DHCP, DNS, IIS (Architecture, design, disaster recovery, and troubleshooting). · Working knowledge with Tenable Nessus, ACAS and SCAP Scanner, STIG checklists and WSUS update tools. · Superior problem solving and troubleshooting skills at the System Engineer level. · Exceptional customer service, overall communication, and technical writing skills · Ability to communicate and work with other internal departments · Ability to work independently with minimal management supervision and as part of the team · Demonstrated aptitude for providing exceptional customer service in politically charged environments · Ability to enhance the technical expertise of peers via the development of system training, mentoring of new hires, and team content development · Ability to apply technology to improve existing products and systems at customers and for internal use · Ability to actively participate in team support by proposing and implementing solutions · Assist in developing strategies to gain additional Premier support accounts by contacting and establishing relationships with Premier Support Managers and Technical Account Managers Other Desired Skills and Experience · Experience in sales of IT-Infrastructure devices and solutions a plus · PKI and Smartcard experience are a plus · 2+ years of related experience with applied experience working with Local, State and Federal Government agencies on solutions, policies, processes, emerging technologies, and methodologies including but not limited to continuous evaluation and insider threat mitigation strategies is highly desirable Benefits Pay & Perks: At Hirsch, we prioritize pay fairness. Your base salary plays a vital role in our comprehensive compensation structure, and it is established within a specific range. This structure allows for advancement as you gain experience and evolve in your role. Your salary and compensation will be determined based on various factors, including your geographical location, skill set, educational background, and work experience. In the spirit of openness regarding compensation, the base salary range for this position is $120,000 to $140,000. The total compensation package includes: · Competitive Base Pay · Fidelity 401(k) + Company Match · 11 Company Paid Holidays · Discretionary Unlimited Paid Time Off · Medical, Dental, & Vision Insurance · FSA/HSA · Fun Employee and Family Events · Employee Wellness Program · Supplemental Life Insurance, AD&D Insurance, and Dependent Care plans · A range of discounted products and free services Hirsch encourages candidates who believe they might be overqualified or outside the expected range to apply, as some positions allow room for up leveling for an extraordinary candidate. We prioritize hiring the most qualified individuals, and in keeping with our commitment to both our employees and customers, employment offers are subject to the outcome of a confidential pre-employment background check. Equal Opportunity Employer Hirsch is an equal opportunity employer and is committed to providing equal employment opportunities to all qualified individuals regardless of race, color, religion, sex, national origin, age, disability, sexual orientation, gender identity, genetic information, marital status, veteran status, or any other characteristic protected by applicable law. We value diversity and inclusivity and believe that a diverse workforce enriches our company culture and enhances our ability to serve our customers and clients effectively. Our hiring decisions are based solely on qualifications, skills, and experience relevant to the positions available. We strive to create a work environment that promotes fairness, respect, and equal opportunities for all employees. Hirsch does not tolerate any form of discrimination or harassment and is committed to maintaining a workplace free from such behavior. If you require any reasonable accommodation, please inform our HR department, and we will make every effort to accommodate your needs. As an equal opportunity employer, we are dedicated to the principles of affirmative action and take proactive measures to ensure equal opportunity in employment. We are proud of our diverse workforce and remain committed to fostering an inclusive environment that celebrates the unique perspectives and talents of everyone.

Job Description Job Description: Electrical Maintenance Technician Location: Hillside, NJ Reporting shift: 3rd shift (primary) About Ronald Mark Associates www.ronaldmark.com Founded in 1974, Ronald Mark Associates (RMA) emerged to connect businesses suffering from resin shortages with reliable material suppliers. Since then, we’ve steadily evolved from a trading and PVC resin distribution operation into a multifaceted manufacturer of vinyl membranes, decorative surfaces, and technical textiles while staying true to our family-owned roots. POSITION OVERVIEW: Electrical maintenance technician is responsible for carry out installations, maintenance and repairs on electrical systems and electronics features of industrial equipment and machines. Responsible to ensure safe and efficient operation of electrical machinery and systems. Work collaboratively in maintaining and implementing innovative control systems for different machinery applications in thermoplastic manufacturing. Drive strategic projects in keeping manufacturing reliable and efficient across traditional automation and newer data / AI-driven tools. JOB DUTIES: Perform routine inspections and preventive maintenance on electrical systems and equipment. Perform replacement on diagnosed faulty electrical elements of machine including motors, relays, and switches; and set-up sensing mechanism, utilizing hand tools. Carry out diagnosis and correct or replace malfunctioning electronic units like the printed circuit boards Carry out diagnosis and ensure replacement of pneumatic, mechanical, hydraulic components of equipment and machines which are faulty. Set up power supply, conduit, and wiring for currently installed equipment and machines, including programmable controllers, while adhering to blueprints, electrical ethics, utilizing voltage tester and hand tools. Testing and validating a control system change before full deployment. Maintaining records of all maintenance and repair works on Brightly asset management system. Build and implement routine and predictive maintenance schedules for electrical, automation and mechanical hardware to reduce downtime Provide technical support and training to the operators / end-users for existing equipment and new equipment. Make repairs to production equipment as required or directed. Perform preventative maintenance as assigned. Maintain a safe and orderly production equipment area. All other duties as assigned by the Plant Engineer. SUCCESS METRICS: Equipment uptime and downtime reduction Successful commission of new equipment Reduction in unplanned production stoppages Accuracy of control system documentation PREFERRED POSITION QUALIFICATIONS: At least 3 years of proven work experience as an Electrical Maintenance Technician in a manufacturing environment with outstanding troubleshooting and technical aptitude. High school diploma or equivalent. Completion of an electrical apprenticeship is preferred. Certification as an Electrical Technician is a plus. Excellent knowledge of electrical systems and wiring. Proficient in the National Electrical Code and local regulations. Basic knowledge in automation controls - ability to follow basic PLC code, ladder logic and sensor setups. Physical fitness and the ability to lift and move heavy equipment. Ability to work collaboratively in a team-oriented environment with a self-starter attitude. Ability to work under stress and ascend stairs and ladders. Effective communication skills, both verbal and written. Ability to interact well with superiors and team members. Willingness to work a flexible schedule.

Job Description Pay: $25.00–$45.00 per hour, based on experience Schedule: All shifts available, with the greatest need on 3rd shift Hours: Minimum 48 hours per week Job Type: Full-time Overtime: Required as needed Work Location: In person Position Summary Union Beverage Packers, LLC is looking for skilled and dependable Industrial Maintenance Mechanics to support our beverage manufacturing operation. We are hiring for all shifts, but we currently have a greater need for qualified candidates on 3rd shift. This position is responsible for troubleshooting, repairing, adjusting, and maintaining production equipment, plant machinery, and related systems. Candidates with experience working on Sidel blow molding equipment are strongly encouraged to apply. The mechanic will work closely with Maintenance, Production, Quality Control, Sanitation, contractors, and equipment vendors to keep production running safely and efficiently. Key Responsibilities The Industrial Maintenance Mechanic will: • Perform scheduled and unscheduled maintenance on production equipment and plant machinery., • Troubleshoot mechanical, pneumatic, hydraulic, electrical, plumbing, HVAC, and refrigeration issues., • Complete preventive maintenance, corrective maintenance, and equipment repairs., • Diagnose equipment failures and make repairs to reduce downtime., • Assist with equipment installation, modification, start-up, and production changeovers., • Read and understand mechanical drawings, schematics, machine manuals, and technical documents., • Inspect equipment daily and report major problems to Maintenance leadership., • Support blow molders, fillers, conveyors, palletizers, packaging equipment, and other production systems., • Enter work orders and maintain accurate repair and maintenance records., • Support production during equipment breakdowns and high-pressure situations., • Follow all safety, GMP, food safety, quality, sanitation, and company procedures., • Keep the work area clean, safe, and organized. Sidel Blow Molding Responsibilities Candidates with Sidel experience may also be responsible for: • Operating, monitoring, adjusting, and troubleshooting Sidel blow molding equipment., • Completing machine changeovers, production start-ups, adjustments, and major repairs., • Maintaining Sidel systems such as SBO, Matrix, Universal, Series 2, or similar equipment., • Troubleshooting mechanical, pneumatic, hydraulic, and basic electrical problems., • Working with Quality Control to make sure bottles meet company standards., • Supporting bottle quality, process improvements, and downtime reduction., • Cleaning, sanitizing, and maintaining blow molding and related production equipment. Required Qualifications • High school diploma or equivalent., • Industrial maintenance, mechanical, manufacturing equipment, or related technical experience., • Strong troubleshooting and problem-solving skills., • Ability to work independently and respond quickly to equipment problems., • Ability to work at least 48 hours per week., • Ability to work overtime, weekends, and holidays when required., • Ability to work safely around production equipment and moving machinery., • Ability to stand, walk, bend, kneel, climb, push, and pull during the shift., • Ability to lift at least 50 pounds., • Ability to work in a warm, loud, wet, and fast-paced manufacturing environment., • Ability to wear all required personal protective equipment. Preferred Experience The following experience is preferred but not required: • Hands-on experience maintaining or repairing Sidel blow molding equipment., • Beverage, bottled water, soft drink, food manufacturing, plastics, PET packaging, or bottling experience., • Experience with fillers, conveyors, palletizers, blow molders, and packaging equipment., • Electrical, welding, plumbing, HVAC, refrigeration, or equipment installation experience., • Experience with PLCs and automated production systems., • Experience performing major machine repairs or equipment overhauls., • Previous experience as a Sidel Field Service Engineer or Service Technician., • Forklift or equipment certification., • Basic computer skills for entering work orders and maintenance records. Physical Requirements • Lift up to 50 pounds regularly and heavier items with proper assistance or equipment., • Stand and walk for long periods., • Bend, reach, kneel, climb, push, and pull throughout the shift., • Work around moving equipment, wet areas, noise, heat, and production activity., • Follow all required safety procedures and PPE requirements. Benefits Union Beverage Packers offers: • Competitive pay from $25.00 to $40.00 per hour, • Overtime opportunities, • Medical insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid time off, • Paid holidays, • 401(k), • 401(k) matching, • Training and growth opportunities Benefits may be subject to eligibility requirements. Candidate Screening Questions • Which shift are you available to work?, • Are you able to work at least 48 hours per week and overtime when required?, • How many years of industrial maintenance experience do you have?, • What production or manufacturing equipment have you repaired?, • Do you have beverage, bottling, food manufacturing, plastics, or packaging experience?, • Have you worked on Sidel blow molding equipment?, • Which Sidel models have you worked on?, • Can you troubleshoot mechanical, pneumatic, hydraulic, and basic electrical problems?, • What major machine repairs or equipment overhauls have you completed?, • Are you comfortable working in a fast-paced beverage manufacturing environment? Equal Opportunity Employer Union Beverage Packers, LLC is an Equal Opportunity Employer. We are committed to providing a safe, respectful, and professional workplace for all employees. You should be proficient in: • Creating Preventive Maintenance Plans, • Mechanical Troubleshooting Skills, • Electrical Troubleshooting, • Electrical Repair, • Pneumatics Troubleshooting, • Maintenance and Repair Skills, • CNC Machine Setup & Changeover, • Industrial Electrical Systems, • Mechanical Systems & Component Repair, • DOT & Equipment Inspection Compliance, • Lockout/Tagout (LOTO), • Equipment Repair & Maintenance, • Automotive Manufacturing Systems, • Automotive Repair & Service Systems, • Machine Safety Inspections

Job Description Overview Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here’s what Transcat has to offer— • Work that matters., • A values-based culture where people care about each other and the work they do together., • Flexibility., • Training and development to accelerate learning and career advancement., • Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! We are Searching for— A full-time, Associate M&R Engineer, located in Rahway, NJ or Elkton, VA, which will support our client with the development and implementation of a comprehensive spare parts program. This is a hybrid position. You will report directly to the MARS Service Lead. This is a project-centered role. The project consists of supporting a leading life sciences client by performing critical spare parts analyses, researching vendor quotations and lead times, and building accurate spare parts master data within the client's Computerized Maintenance Management System (CMMS). Responsibilities Essential Duties and Responsibilities— • Support the development and implementation of a site-wide spare parts program for production, laboratory, utility, and facility assets, • Perform critical spare parts analyses to identify recommended inventory based on equipment criticality, risk, lead time, and operational requirements, • Review equipment documentation, OEM manuals, bills of materials (BOMs), and existing maintenance data to identify required spare parts, • Coordinate with equipment vendors and suppliers to obtain quotations, pricing, lead times, and replacement part information, • Validate manufacturer part numbers, descriptions, supplier information, and technical specifications for accuracy, • Enter and maintain spare parts master data within the client's CMMS, ensuring consistency with established naming conventions and data standards, • Assist in creating and maintaining equipment Bills of Materials (BOMs) and spare parts relationships within the CMMS, • Collaborate with maintenance, engineering, procurement, and operations personnel to validate spare parts recommendations and inventory strategies, • Maintain detailed documentation supporting spare parts decisions, supplier information, and procurement recommendations, • Assist with identifying obsolete parts, recommended substitutions, and alternate sourcing opportunities, • Utilize Microsoft Excel and other data management tools to organize, analyze, and report spare parts information, • Ensure all work complies with client procedures, documentation standards, and applicable safety and quality requirements, • Assist with other duties as assigned Qualifications Required Knowledge, Skills and Abilities: • Ability to learn how to interpret equipment drawings, OEM manuals, equipment lists, and Bills of Materials (BOMs), • Able to become familiar with equipment criticality and risk-based decision making for spare parts selection, • Strong organizational skills with exceptional attention to detail and data accuracy, • Ability to manage multiple priorities while maintaining high-quality documentation, • Strong written and verbal communication skills with the ability to collaborate across maintenance, engineering, procurement, and operations teams, • Proficient in Microsoft Office applications, particularly Microsoft Excel Preferred • Bachelor's or Associate degree in a STEM field or trade certification in mechanical, electrical, instrumentation, industrial technology, or a related discipline, • Experience in maintenance, reliability, storeroom, procurement, or spare parts management, • Experience working in a maintenance or technician role, • Experience working with Computerized Maintenance Management Systems (CMMS), such as SAP PM, Maximo, Infor EAM, or similar systems, • Experience supporting pharmaceutical, biotechnology, or other regulated manufacturing environments, • Experience working with spare parts optimization, inventory management, or CMMS master data, • Experience researching supplier information, obtaining quotations, and evaluating lead times, • Familiarity with maintenance and repair operations, including spare parts for Maintenance, Repair, and Operations (MRO), • Familiarity with SAP PM, IBM Maximo, or other enterprise asset management systems, • Certified Reliability Leader (CRL) or Certified Maintenance & Reliability Professional (CMRP) certification If this sounds like you, apply today! Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.

Position: Network & Computer Systems Engineer Location: Remote Terms: Full Time Clearance: Ability to obtain a Public Trust Clearance Travel: 0–10% We’re a mission-driven IT services company and systems integrator supporting digital transformation and modernization for Federal government agencies. Since 2009, we’ve partnered with our customers to solve complex challenges through smart, practical innovation to deliver real outcomes where they matter most. Our teams are made up of industry-leading experts who are passionate about doing great work and making a difference. We don’t just develop solutions—we support efforts that strengthen communities and serve the public good. RIVA’s culture is built on four core values: Results, Innovation, Values, and Accountability. They guide how we work, how we collaborate, and how we measure success. Our employee-first approach is rooted in trust, ownership, and meaningful work. By investing in our people and fostering a flexible, supportive environment, you will have the opportunity to grow your skills, contribute ideas, and make an impact from day one—all while supporting missions that matter. Program Overview The Network and Computer Systems Administrator (Firewall Engineer) supports secure, reliable enterprise network and security operations for a Federal customer. The role helps sustain mission-critical connectivity and access across LAN, WAN, internet, wireless, firewall, network access control, load-balancing, endpoint management, and security-monitoring technologies. The position also contributes to continuous diagnostics and mitigation activities, vulnerability remediation, configuration compliance, and service continuity across the enterprise environment. Position Overview RIVA Solutions is seeking an experienced Network and Computer Systems Administrator (Firewall Engineer) to install, configure, operate, maintain, and troubleshoot enterprise network and security infrastructure. The ideal candidate brings hands-on expertise with Palo Alto Networks firewalls, Cisco Identity Services Engine, enterprise wireless technologies, F5 Networks load balancing, Splunk or comparable SIEM platforms, and endpoint-management tools. This role works closely with cybersecurity, infrastructure, application, and service-management teams to maintain secure access, resolve incidents, implement approved changes, and improve network performance and resilience. Core Responsibilities • Install, configure, administer, and maintain LAN, WAN, internet, wireless, and enterprise network-security infrastructure., • Administer and support Palo Alto Networks firewalls, including security policies, rules, upgrades, configuration changes, and logging., • Support Cisco Identity Services Engine (ISE) for network access control, authentication, authorization, and endpoint visibility., • Configure and troubleshoot enterprise Wi-Fi networks, wireless controllers, access points, and wireless-security standards., • Administer and support F5 Networks load balancers and related application-delivery services., • Monitor network availability, capacity, performance, and security events; identify abnormal behavior and service degradation., • Troubleshoot network outages, firewall issues, wireless connectivity problems, access-control failures, VPN issues, and performance problems., • Review network and security logs using Splunk and other SIEM tools to support incident analysis and operational monitoring., • Support Continuous Diagnostics and Mitigation (CDM) activities, including vulnerability remediation and configuration-compliance efforts., • Support mobile-device and endpoint management using VMware AirWatch and Microsoft Intune., • Perform network-device maintenance, patching, software upgrades, configuration changes, and lifecycle support., • Develop and maintain technical documentation, network diagrams, standard operating procedures, configuration records, and implementation plans., • Coordinate with cybersecurity, infrastructure, application, and service-management teams to resolve incidents and implement approved changes. Minimum Qualifications • Bachelor’s degree in Information Technology, Computer Science, Cybersecurity, Engineering, or a related field. Relevant professional experience may be considered in lieu of a degree., • Four (4) years of relevant network or systems administration experience, including at least two (2) years of hands-on experience supporting enterprise firewalls, network access control, wireless networks, or related network-security technologies., • Experience administering and supporting enterprise network and security infrastructure., • Hands-on experience with Palo Alto Networks firewalls., • Experience with Cisco Identity Services Engine (ISE) and network access control technologies and processes., • Experience supporting enterprise wireless networks, wireless controllers, access points, and applicable wireless-network standards., • Experience with F5 Networks load-balancing and application-delivery technologies., • Experience using Splunk or another SIEM platform for security and operational monitoring., • Experience supporting continuous diagnostics and mitigation, vulnerability remediation, or configuration-compliance activities., • Experience with VMware AirWatch and Microsoft Intune for endpoint or mobile-device management., • Knowledge of LAN, WAN, TCP/IP, DNS, DHCP, routing, switching, firewalls, VPNs, access-control lists, and network-security principles., • Experience monitoring, troubleshooting, maintaining, patching, and upgrading network devices and services., • Ability to develop clear technical documentation and communicate effectively with both technical and nontechnical stakeholders., • Ability to obtain and maintain a Government Public Trust background investigation or designation. Preferred Qualifications • Experience supporting Federal Government networks or other regulated enterprise environments., • Experience with Palo Alto Panorama for centralized firewall management., • Experience with Cisco wireless controllers, routers, and switches., • Experience supporting vulnerability remediation, security hardening, and compliance activities., • Cisco, Palo Alto Networks, CompTIA, Splunk, F5, Microsoft, or VMware certifications. Salary $95,000 RIVA Benefits • Paid Time Off / Sick Leave, • Health, Dental, and Vision Coverage, • Life Insurance, • 401(k) Retirement Plan with Company Match, • HSA/FSA Spending Accounts, • Long- and Short-Term Disability, • Pet Insurance, • Wellness Program Initiatives, • RIVA Flex (Flexible Hours and Hybrid Support, where applicable), • Additional Workplace Benefits Equal Opportunity Statement RIVA Solutions is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy and related conditions), sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any protected class. If you need a reasonable accommodation to search for a job opening or to submit an online application, please email _. Only messages left for this purpose will be returned.

The contractor will support OFR’s efforts to engineer, build, configure and maintain the OFR’s Windows, Cloud, Virtualization and Storage systems following best practices to better ensure that OFR designs, deploys and sustains secure, high quality, highly available information technology solutions that align with operational objectives. Duties include but not limited to: • Expert in Active Directory/Entra ID administration in a Hybrid Environment, • Proficiency in Active Directory administration, FSMO roles, replication, and OU management, • Knowledge of PKI, CAC/ALT-token authentication, and certificate lifecycle management, • Expert in Microsoft 365 Management (Hybrid) administration including Exchange Online, Teams, and OneDrive for Business., • Experienced in Virtualization; Manage and optimize virtualization platforms (e.g., VXRail/VMware/Horizon)., • Systems administration of Windows systems using PowerShell, scripting, and automation., • Desktop/Laptop deployment and management., • Amazon Web Services Windows instances deployment and administration - a plus, • SCCM (MECM) / Intune administration in a co-managed environment, including patching, package prep and deployment and reporting on Windows devices – a plus, • Documentation, development of system diagrams and SOPs, • Conducting integration testing, transition and acceptance and training from the Engineering phase to the production phase. Coordinate activities at the system interface boundaries with other contractors and Government organizations. Microsoft Active Directory: Administer and maintain Active Directory (AD) and Group Policy Objects (GPOs). Manage user accounts, permissions, and security groups. Implement AD best practices and troubleshoot AD-related issues. Perform regular AD health checks and ensure system integrity. Administer DHCP, DNS, and file/directory permissions. Utilize PowerShell for automation, reporting, and system management. Manage folder and file share permissions following least‑privilege principles. Office 365 Management (Hybrid): Administer Office 365 environment, including Exchange Online, Teams, and OneDrive for Business. Manage user accounts, licensing, and service configurations. Lead and drive Microsoft 365 upgrades, migrations, and platform modernization effort. Implement best practices around identity, access, and compliance policies using Conditional Access, DLP, Sensitivity Labels, and Defender for Office 365. Virtualization: Manage and optimize virtualization platforms (e.g., VXRail/VMware/Horizon). Oversee virtual machine creation, configuration, and performance tuning. Ensure high availability and disaster recovery solutions for virtual environments. Troubleshoot and resolve virtualization-related issues. Server Maintenance: Oversee physical and virtual servers Monitor server performance, conduct regular updates, and perform backups. Troubleshoot and resolve server issues to minimize downtime. Implement and manage server security patches and updates. Documentation and Reporting: Maintain accurate and up-to-date documentation for all IT systems and procedures. Create and manage system diagrams, configuration records, and troubleshooting guides. Generate regular reports on system performance, security incidents, and project status. Collaboration and Support: Work closely with other IT staff, departments, and external vendors to resolve technical issues. Provide guidance and mentorship to junior IT staff and helpdesk personnel. Participate in IT planning and strategy sessions. • 10+ or more years of IT experience in an Active Directory environment, • Experienced in M365 Hybrid environment (on-prem / M365), • Experience with Windows PowerShell scripting. Must have experience in the following technologies: • Expert in Active Directory/Entra ID administration in a hybrid environment, • Experience with Okta, including installation, configuration, and migrations, • Certificate lifecycle management, • Expert in Microsoft 365 administration, • VxRail / VMware / Horizon management and administration, • Systems administration of Windows systems using PowerShell, scripting, and automation, • Manage Engine tools (ADManager/ADAudit/AD360), • BeyondTrust (Bomgar) solutions experience a plus (Remote Assistance/PAM), • Windows server deployment in cloud (AWS) and virtualized environments (VMware) (Windows 2019/20222 experience preferred), • Documentation, development of system diagrams and SOPs, • Conducting integration testing, transition and acceptance and training from the Engineering phase to the production phase., • Coordinate activities at the system interface boundaries with other contractors and Government organizations. Preference given for experience in the following technologies: • Active Directory/Entra ID, • Microsoft 365 administration, • Certificate lifecycle management, • Skilled in using Active Directory Group Policies to manage and configure security settings on Windows as well as general Active Directory administration, • Worked in VMware environments with Horizon VDI solutions or Windows AWS Workspaces solution, • MDM Solution such as Intune, • Excellent written and verbal communications skills, • Preference given for Microsoft certifications, • Preference given for VMWare certification, • Preference given for Okta certification, • Public Trust High (Tier 4/BI) Risk Level, • Must be a US citizen or Lawful Permanent Resident, • The position is remote but preference is given to candidates in the DC metro area. $145,000 - $155,000 a yearThe offered rate will be based on the selected candidate’s knowledge, skills, abilities and/or experience and in consideration of internal parity. The posted range is appropriate for a typical candidate meeting, at a minimum, all the core requirements of the position. Computer World Services is an affirmative action and equal employment opportunity employer. Current employees and/or qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, disability, protected veteran status, genetic information or any other characteristic protected by local, state, or federal laws, rules, or regulations. Computer World Services is committed to the full inclusion of all qualified individuals. As part of this commitment, Computer World Services will ensure that individuals with disabilities (IWD) are provided reasonable accommodations. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact Human Resources at _. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

About Flow-Turn: \n Flow-Turn is a global leader in the manufacturing of powered belt curves and spiral inclines/declines, based in Union, New Jersey. Since 1980, we have delivered simple, efficient, and reliable products to a diverse range of national and international customers. In 2011, the company was acquired by Hermann Miedel and rebranded to Flow-Turn. The Miedel family proudly runs operations at Flow-Turn. In 2024, Flow-Turn was recognized as a Minority-Owned Business. \n \n Position Summary: \n We are seeking an experienced Estimating and Costing Engineer to develop accurate estimates for conveyor curves and other material handling products and to help maintain, modernize, and expand Flow-Turn's Excel-based estimating and pricing platform. The ideal candidate combines strong metal manufacturing and cost-estimating knowledge with advanced Excel application development skills, including VBA programming, Power Query, complex formulas, structured data, and workbook integration. \n \n Salary: $85,000-$100,000 \n \n Key Responsibilities: \n\n • Prepare detailed cost estimates for conveyor curve and material handling products, including material, labor, machine time, and tooling costs.\n, • Read and interpret engineering drawings, specifications, and bills of materials (BOMs) to price new and existing products.\n, • Evaluate sheet metal fabrication, welding, machining, and assembly processes to determine accurate labor and manufacturing costs.\n, • Review supplier quotes and work with Purchasing to keep material and outside-service costs current.\n, • Maintain and improve the Excel/VBA estimating and pricing tool while keeping established costing logic intact.\n, • Add new products, options, and features to the pricing tool using table-driven setups instead of hard-coded logic.\n, • Use Excel formulas, structured tables, PivotTables, and Power Query to manage supplier data, material costs, and labor rates.\n, • Troubleshoot VBA macros, linked workbooks, and data connections.\n, • Document calculation methods so estimates are consistent and easy to review.\n\n \n \n Project Handoff and Collaboration \n\n • Create and validate detailed internal cost sheets for project review and approval.\n, • Support project handoffs to Operations, Engineering, and Project Management.\n, • Participate in project kickoff meetings.\n\n \n Required Qualifications \n\n • Bachelor's degree in Engineering, Construction Management, or a related field.\n, • 5+ years of experience in cost estimating, engineering, or a related role within a manufacturing environment.\n, • Hands-on experience in metal manufacturing, including fabrication, welding, machining, forming, or sheet metal processes.\n, • Advanced Microsoft Excel expertise, including complex formulas, structured tables, named ranges, PivotTables, data validation, workbook architecture, and internal/external workbook references.\n, • Advanced VBA application development experience required, including development and maintenance of large or business-critical Excel applications; reusable functions and procedures; Excel object model programming; arrays and dictionaries; event-driven code; error handling; debugging; and performance optimization.\n, • Experience using Power Query to import, transform, combine, and refresh data from multiple sources.\n, • Ability to read and interpret engineering drawings, specifications, and BOMs.\n, • Strong analytical, problem-solving, and communication skills, with close attention to detail and accuracy.\n\n \n Preferred Qualifications \n\n • Experience estimating conveyor systems, curves, or other material handling equipment.\n, • Experience designing configuration-based or rules-based estimating tools and improving legacy spreadsheet applications.\n, • Familiarity with ERP/MRP systems and integrating estimating or costing tools with business systems.\n, • Familiarity with SQL, Power BI, databases, APIs, or other data-integration technologies.\n, • Experience with source control or structured software-development practices is a plus.\n

Job Title: Production Support engineer (SRE) \n Location: Jersey City, NJ 07310 (All 5 days onsite) \n Contract to Hire \n \n Technical Skill Set \n Cloud: AWS exposure \n IaC: Terraform \n Load Balancers \n CI/CD: Automations, Jenkins \n Scripting: Unix or Python \n General: Strong hands-on engineering and SRE capabilities \n \n Job Description: \n • Proficient in application development skills for more than one technology as well as multiple design techniques. \n • Working proficiency in development toolset to design, develop, test, deploy, maintain and improve software. \n • Strong understanding of Agile methodologies with ability to work in at least one of the common frameworks. \n • Strong understanding of techniques such as Continuous Integration, Continuous Delivery, Test Driven Development, Cloud Development, application resiliency and security. \n • Proficiency in one or more general purpose programming languages. \n • Working proficiency in a portion of software engineering disciplines and demonstrates understanding of overall software skills including business analysis, development, testing, deployment, maintenance and improvement of software. \n \n Roles and Responsibilities: \n • Formal training or certification in software engineering /Site Reliability Engineering concepts and 6+ years of applied experience. \n • Handson practical experience in system design, application development, testing, and operational stability. \n • Exposure to product engineering or production/Platform support activities with a good understanding on scalability, security, and reliability. \n • Experience in developing, debugging, and maintaining code in a large corporate environment with one or more modern programming languages and database querying languages. \n • Demonstrable ability to code in one or more languages. \n • Experience across the whole Software Development Life Cycle. \n • Exposure to agile methodologies such as CI/CD, Application Resiliency, and Security. \n • Emerging knowledge of software applications and technical processes within a technical discipline (e.g., cloud, artificial intelligence, machine learning, mobile, etc.).

Summary / Objective: \n The Key Account Manager (Sales Engineer) is an entry level sales engineer responsible for \n developing strategic partnerships with key customers by combining engineering expertise with \n consultative sales leadership. \n This position serves as the primary advisor for assigned accounts, driving sales of products which \n improve customer manufacturing processes, increase operational efficiency, and optimize application performance through Habasit's engineered solutions. \n \n The Key Account Manager works closely with Engineering, Product Management, Technical Services and Operations to design application-specific solutions, support complex projects, and drive sustainable business growth through innovation and value-based selling. \n Habasit will provide technical and commercial onboarding training at our facilities in Suwanee, GA. \n (4-6 weeks) \n \n Essential Functions: \n In accordance with the Americans with Disabilities Act, reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. \n Sales & Engineering Support \n • Develop a strong understanding of assigned customers, their equipment, manufacturing processes, and business needs. \n • Recommend Habasit conveying and power transmission products that address customer applications and improve productivity, reliability, and operating performance. \n • Conduct customer visits, application reviews, product demonstrations, troubleshooting, and basic process assessments. \n • Identify opportunities for product replacements, upgrades, improvements, and competitive \n conversions. \n • Support product installation, commissioning, start-up, and implementation activities as \n needed. \n • Work with Technical Services and Engineering to address customer application requirements and \n develop appropriate solutions. \n • Develop new business within existing accounts and identify opportunities with new \n customers. \n Strategic Account Management \n • Develop and maintain strong relationships with engineering, maintenance, operations, purchasing, and other key customer contacts. \n • Support account plans focused on customer retention, growth, and long-term partnership. \n • Identify opportunities related to new equipment, production lines, process improvements, \n automation, and capital investments. \n • Prepare quotations and support pricing and commercial discussions in accordance with company \n guidelines. \n • Maintain an accurate opportunity pipeline and customer information using CRM tools, including \n Sugar CRM. \n • Follow up on customer opportunities and ensure appropriate internal resources are \n engaged. \n Cross-Functional Collaboration \n • Work with Product Management to identify customer needs and recommend appropriate products and solutions. \n • Partner with Customer Care, Manufacturing, Supply Chain, Quality, Operations, Engineering, \n and Technical Services to support customer requirements. \n • Communicate customer feedback, product requirements, competitive information, and market trends to appropriate internal teams. \n • Participate in customer problem-solving, failure analysis, continuous improvement, and Voice of \n Customer activities. \n Industry & Technical Leadership \n • Remain current on conveyor technology, polymer materials, power transmission systems, \n manufacturing processes, and emerging automation technologies. \n • Represent Habasit during seminars, customer training sessions, trade shows, and industry \n conferences. \n • Deliver technical presentations and educational workshops for customers, distributors, and \n internal teams. \n • Promote industry best practices, innovation, sustainability, and continuous improvement \n throughout customer engagements. \n Required Skills / Abilities: \n • Strong technical aptitude with basic understanding of mechanical systems, manufacturing \n processes, and industrial equipment. \n • Ability to understand and interpret basic engineering drawings, specifications, and technical \n documentation. \n • Strong customer service mindset. \n • Ability to understand complex problems and develop practical solutions. \n • Strong verbal, written, and presentation skills. \n • Ability to explain technical information clearly to both technical and non-technical \n audiences. \n • Strong analytical and problem-solving skills. \n • Proficiency in Microsoft Office applications. \n • Strong organizational and follow-up skills. \n • Ability to work independently while collaborating effectively with internal teams. \n \n Supervisory Responsibility: \n This position does not typically supervise staff. \n \n Work Environment: \n This position operates in a professional office environment with frequent exposure to manufacturing settings and customer facilities. The role may include exposure to forklift traffic, equipment noise, and production processes. \n Physical Demands: \n • Prolonged periods of sitting, standing, and walking. \n • Frequent use of hands and arms for handling product samples and presentations. \n • Must be able to lift up to 20 lbs. occasionally (up to 40 lbs. in some assignments). \n • Required to safely operate a motor vehicle in varied conditions. \n Position Type and Expected Hours of Work: \n Full-time, Monday through Friday, 8:00 AM to 5:00 PM. Evening and weekend work may be required to meet customer demands, project deadlines, or trade show schedules. \n \n Travel: \n Extensive travel (up to 50%) is expected, including overnight stays for customer visits, trade \n shows, training, and business meetings. \n \n Required Education and Experience: \n • Bachelor's degree in Engineering. \n • Equivalent combination of education, technical training, and relevant experience may be \n considered. \n • Experience in technical sales or application engineering. \n • Experience with conveyor systems, power transmission, industrial automation, or engineered \n products. \n • Experience working with manufacturing customers. \n • Experience with CRM systems and structured sales processes. \n • Exposure to complex sales cycles and multiple customer stakeholders. \n • Up to 4 years of experience in technical sales, application engineering, manufacturing, \n industrial products, conveyor systems, power transmission, or a related field. \n • Experience working with OEMs, manufacturers, distributors, or industrial end users \n preferred. \n • Demonstrated ability to develop customer relationships and identify sales \n opportunities. \n • Experience working with technical products or industrial applications preferred \n Other Duties: \n This job description is not designed to cover all activities, duties, or responsibilities. Duties \n may change at any time with or without notice. \n \n Employment with Habasit America is at-will. Habasit America is an equal opportunity employer and \n does not discriminate based on race, color, age, sex, sexual orientation, gender identity, \n religion, disability, national origin, veteran status, or any other legally protected status. \n

Job DescriptionBuilding Engineer Location: Jersey City, NJ Position Summary: BLT is seeking a dedicated and professional Building Engineer to join our luxury residential community in Jersey City, NJ. This position is responsible for supporting the operation, maintenance, and repair of building systems and equipment to ensure the property operates safely, efficiently, and reliably. The ideal candidate is hands-on, mechanically inclined, and experienced in residential building maintenance and mechanical/electrical systems. Responsibilities of the Building Engineer: • Perform mechanical and electrical maintenance, troubleshooting, and repair of building systems and equipment, • Respond promptly to service requests, building issues, and emergency maintenance situations, • Support preventative maintenance programs for mechanical, electrical, HVAC, plumbing, fire/life safety, generators, security, access control, BMS, and vertical transportation systems, • Assist in maintaining facility utilities including gas, electric, sewer, water, phone, and CATV services, • Conduct routine inspections of building systems, equipment, and common areas to identify maintenance needs and safety concerns, • Maintain accurate documentation, inspection records, and maintenance reports, • Assist with inventory control and organization of maintenance parts and supplies, • Ensure compliance with applicable codes, regulations, company standards, and safety procedures, • Support the upkeep and appearance of both interior and exterior property conditions, • Participate in a rotating on-call schedule to provide after-hours emergency coverage, • Communicate effectively with residents, vendors, supervisors, and team members regarding maintenance issues and completed work Qualifications of the Building Engineer: • 3+ years of hands-on experience maintaining central HVAC and mechanical systems, including water source heat pumps, cooling towers, and boiler plants., • Working knowledge of electrical systems and mechanical equipment, • Basic knowledge of local and national mechanical and electrical codes, • Ability to read and interpret blueprints and schematic diagrams, • Experience using hand and power tools safely and effectively, • Basic plumbing and piping knowledge, including compressors and air systems, • Strong troubleshooting and problem-solving skills, • Ability to work varying shifts, weekends, and holidays as neededPhysical Requirements of the Building Engineer:, • Ability to lift and carry up to 50 pounds., • Ability to climb ladders and safely work at varying heights., • Ability to access and work within confined or limited-access mechanical spaces as required to inspect, troubleshoot, and repair building equipment., • Ability to stand, walk, bend, kneel, crouch, and perform physical maintenance tasks for extended periods., • Ability to work indoors and outdoors in varying weather conditions. Compensation & Benefits: BLT offers a competitive compensation and benefits package, including: • Competitive salary of $80,000-90,000 with potential for bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Tuition reimbursement program, • Employee housing discount at BLT-owned properties BLT is an equal opportunity employer. This description is not intended to be a comprehensive list of all duties, responsibilities, or qualifications associated with this position. Other duties may be assigned as needed. PM21 Powered by JazzHR bjCFOloct3

Job Description About the Role: The Plant Engineer/Mechanic plays a critical role in ensuring the continuous and efficient operation of manufacturing and production facilities. This position is responsible for maintaining, troubleshooting, and repairing mechanical systems and equipment to minimize downtime and optimize plant performance. The role requires a proactive approach to identifying potential mechanical issues and implementing preventive maintenance strategies. The Plant Engineer/Mechanic collaborates closely with production teams to support operational goals while adhering to safety and quality standards. Ultimately, this position contributes to the overall reliability and productivity of the plant by applying technical expertise and problem-solving skills. Minimum Qualifications: • High school diploma or equivalent; technical certification or associate degree in mechanical engineering technology or related field preferred., • Proven experience as a mechanic or maintenance technician in an industrial or manufacturing environment., • Strong knowledge of mechanical systems, hydraulics, pneumatics, and industrial machinery., • Ability to read and interpret technical manuals, blueprints, and schematics., • Familiarity with safety standards and best practices in plant maintenance. Preferred Qualifications: • Certification in industrial maintenance or mechanical engineering (e.g., Certified Maintenance & Reliability Technician)., • Experience with computerized maintenance management systems (CMMS)., • Knowledge of electrical systems and controls as they relate to mechanical equipment., • Experience working in a lean manufacturing or continuous improvement environment., • Strong troubleshooting and diagnostic skills with a focus on root cause analysis. Responsibilities: • Perform routine and preventive maintenance on mechanical equipment and machinery to ensure optimal functionality., • Diagnose mechanical failures and execute timely repairs to minimize production interruptions., • Collaborate with engineering and production teams to plan and implement equipment upgrades and modifications., • Maintain accurate maintenance records and report on equipment status and repair activities., • Ensure compliance with safety regulations and company policies during all maintenance and repair tasks. Skills: The required skills enable the Plant Engineer/Mechanic to effectively maintain and repair complex mechanical systems, ensuring minimal downtime and sustained production efficiency. Proficiency in reading technical documents and schematics allows for accurate diagnosis and repair of equipment issues. Strong mechanical aptitude combined with hands-on experience supports the execution of preventive maintenance and emergency repairs. Preferred skills such as familiarity with CMMS and electrical systems enhance the ability to manage maintenance schedules and address interdisciplinary challenges. Additionally, troubleshooting and root cause analysis skills are essential for identifying underlying problems and implementing long-term solutions that improve plant reliability.

Job Description Job Title: System Engineer / Design Team Lead (DTL) - Infrastructure Design Location: Jersey City, NJ / Charlotte, NC / Pennington, NJ Duration: Contract - 10 months Pay Range: $73.93/hr (W2) Job ID: 410914 About BCforward BCforward is a leading global IT consulting and workforce solutions firm providing services and support to Fortune 500 and government clients. Founded in 1998, BCforward has grown with our customers needs into a full-service business solutions provider. With delivery centers and offices across North America and India, we take pride in building long-term relationships and delivering excellence through innovation, collaboration, and integrity. Job Description We are seeking an System Engineer / Design Team Lead (DTL) - Infrastructure Design to join our dynamic team. The ideal candidate will have strong experience in infrastructure solution design, cloud, networking, and ITSM-driven design processes and a proven ability to lead end-to-end technical design to meet business requirements. Responsibilities: • Engage with clients to understand business requirements and review Business Requirements Documents., • Translate business requirements into actionable technical requirements and low-level designs., • Identify and coordinate with Technology Infrastructure SMEs for design discussions and validation., • Produce Low Level Designs using the ITSM Service Request Design Console and create High Level Designs using Visio and Adobe., • Apply reference architecture standards and relevant frameworks to deliver standardized, supportable solutions., • Identify non-standard products and drive resolution with appropriate stakeholders., • Partner with the Chief Engineer and Capacity Planner to define hosting targets and sizing for CPU, memory, and storage., • Document assumptions, issues, risks, and key decisions that affect technical designs and deliverables., • Capture LLD details including compute, memory, storage type and ownership, backup schedules and retention, file systems, application stack requirements, hosting location, AD OUs, maintenance windows, and required platform software., • Coordinate closely with Technology Project Managers on status, risks, and escalations throughout the lifecycle., • Engage Supply Chain Management to obtain hardware quotes when applicable and secure approvals for cost and design., • Maintain and publish accurate design artifacts to the project repository. Required Skills & Qualifications: • Ability to create end-to-end infrastructure solutions and conceptual designs in MS Visio., • Knowledge of database technologies and interfaces., • Understanding of cloud and cloud-based technologies., • Understanding of network infrastructure including HTTP, TCP, DNS, and load balancers., • Customer-focused communicator with the ability to influence and work with SMEs and business stakeholders., • Strong leadership to lead the analyze and design phase and meet committed deliverable dates., • Ability to articulate solutions to line-of-business partners and technical hosting teams., • Experience producing HLDs and LLDs within ITSM-driven processes. Preferred Skills: • Software developer background to support solution design and integration considerations., • Experience with Oracle Cloud or AWS solutions., • Familiarity with PMM/DSES processes and required outputs., • Exposure to cloud security practices. Why BCforward? At BCforward, we believe in advancing lives and careers. When you join our team, you gain access to: • Competitive compensation and benefits., • Opportunities for growth with global clients., • A supportive, inclusive culture that values innovation and people., • Exposure to cutting-edge technologies and projects. About Our Commitment BCforward is an equal opportunity employer. We value diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, or veteran status. Interested? Apply Now! If this sounds like the right opportunity for you, please apply with your most recent resume.

Job Description Overview Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here’s what Transcat has to offer— • Work that matters., • A values-based culture where people care about each other and the work they do together., • Flexibility, • Training and development to accelerate learning and career advancement., • Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! We are Searching for— A Maintenance and Reliability Engineer, to serve as a key technical resource supporting clients in optimizing maintenance and reliability programs, driving performance improvements, and sustaining asset health. You will balance hands-on maintenance leadership with analytical reliability strategies that reduce downtime, extend asset life, and improve overall equipment effectiveness (OEE). This is an on-site position with occasional travel up to 25% of the time. You will report directly to our Maintenance and Reliability Service Leader. Responsibilities Essential Duties and Responsibilities • Adhere to stringent regulatory requirements, such as FDA regulations, ensuring all activities and equipment meet industry standards for quality and safety., • Lead and execute preventive and predictive maintenance activities on production, utility, and process equipment., • Conduct data-driven analyses of equipment reliability trends and develop improvement recommendations., • Implement and sustain CMMS processes including PM optimization, asset hierarchies, and work management best practices., • Support and facilitate root-cause analysis (RCA) and corrective action implementation., • Partner with cross-functional teams (engineering, operations, quality, EHS) to align M&R initiatives with business goals., • Support regulatory compliance (FDA, GMP) and ensure documentation meets company and industry standards., • Coordinate vendor and contractor support for maintenance and reliability improvement activities., • Contribute to MRO spare parts management, bill of materials accuracy, and lifecycle cost reduction., • Participate in continuous improvement and digital transformation initiatives leveraging data visualization, AI, or BI tools. Qualifications Required Knowledge, Skills and Abilities • 3 – 5 years of experience in maintenance and/or reliability engineering., • Experience with either SAP or Hexagon is preferred., • Demonstrated experience in preventive and predictive maintenance programs., • Working knowledge of reliability analysis methods and continuous improvement tools., • Proficiency with Computerized Maintenance Management Systems (CMMS)., • Understanding of mechanical, electrical, pneumatic, and hydraulic systems., • Experience with MRO and spare parts management and BOM development., • Knowledge of EHS and GMP regulations., • Familiarity with Business Intelligence tools (Spotfire, Power BI, Tableau) or AI technology., • Strong verbal, written, and presentation skills; proficiency in Microsoft Office platforms (Excel, Word, PowerPoint)., • Able to travel up to 25% of the time. Preferred: • Bachelor’s or Associate degree in a STEM field or trade certification in instrumentation, mechanical, electrical, or related engineering field., • Life Science experience., • Certified Reliability Leader (CRL) or Certified Maintenance & Reliability Professional (CMRP) certification. If this sounds like you, apply today! Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.

Job Description Join the team at New Jersey’s largest wine and spirits distributor! At Allied Beverage Group, we’re proud of our dynamic, family-based culture and our role in keeping the beverage industry moving. If you're looking for a great company with great people—this is the place to be! Overview The Night Shift Manager is a key leader position in the distribution and operations organization reporting directly to the Operations Director. Requires strong interpersonal and communication skills as well as knowledge of warehouse operations to include inventory control, shipping and receiving operations in a Direct Sales organization. Preference for warehouse automation experience (especially Knapp) and union environment is a plus but not required. Mid-shift Manager directs the mid shift and returns aspects of operations, ensuring the highest level of customer service from the warehouse to customers while improving productivity through continuous improvement in fill rate, throughput, and cost. Responsibilities • Planning- Ability to identify and plan for staffing requirements based on knowledge and forecasting for OSR and Returns. Has the ability to make decisions based on experience in shipping, receiving and inventory control. Ensures that procedures and processes match requirements of the operation. Capability to train and implement new technology and processes while maintaining productivity, • Continuous Improvement – Understanding urgency to reach daily goals during the operation. Learning from trends to Develop and Execute with the management team and frontline correct standard operating procedures and performance-based metrics to drive results through continuous improvement programs, • Building an inclusive culture – Individual and collective accountability, reward and recognition programs, communication designed to develop the frontline employees and build a desirable place to work., • Collaboration- Partnering with Night and Day operations managers, delivery, and Maintenance functions to identify areas of opportunities for improvements to fill rate, throughput, and reduction of cost., • Safety- Direct programs to ensure the safety of all personnel, equipment and property. Provide safety instruction to personnel as needed. Report all work-related injuries immediately. Provide immediate medical attention to injured employees as necessary. Ensure compliance with appropriate government regulations.Qualifications, • Bachelor’s Degree ( Logistics management, Mechanical engineer, or Business Management, • 5+ years of senior supervision level experience within a distribution warehouse, • 7+ years of operation supervision experience, • Preferred: Warehouse automation experience, • Functional system understanding in WMS, Microsoft Office, Excel, PowerPoint, • Ability to work non-traditional business hours including evenings, nights and weekends only when required, • Strong Communication skills – verbal, presentation, writingCompensation and Benefits The anticipated salary range for this position is $90,000 to $100,000, depending on qualifications such as experience, education, and skillset. In addition to salary, this role is eligible for a discretionary bonus and offers a comprehensive benefits package including Medical, Dental, Vision, 401K plan with company match, Life Insurance, Long Term Disability, Flexible Spending Account, Employee Assistance Program, Pet Insurance Plan and more. Why You Will Love Allied Beverage Group Industry Leader – We are New Jersey’s Largest Wine and Spirits Distributor Culture – We may be a big corporation, but we are still family owned and we like to think that influences our work environment. We promote a culture based on trust, respect and collaboration State of the Art Facility – We opened a brand-new corporate office and distribution center in Elizabeth, NJ in 2019 Your Continued Growth – Our company encourages our employees to reach high, live up to their potential, and advance in their careers. We offer over 9,000 professional development courses that employees can take at any time Competitive Pay and Quality Benefits – Allied Beverage Group offers competitive pay commensurate with experience along with a comprehensive benefits package Allied Perks! – Associate recognition, discounts with several vendors and more The Company is dedicated to ensuring a safe and secure environment for our team members and visitors. To assist in achieving that goal, we conduct a drug and background check for all new team members post-offer and prior to the start of employment. The Immigration Reform and Control Act requires that verification of employment eligibility be documented for all new employees by the end of the third day of work. Allied Beverage Group participates in the E-Verify program to confirm employment eligibility of all new hires in the United States. EEO and AI Disclosure Statement Allied Beverage Group is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, genetic information, or any other legally protected characteristics. As part of our recruitment process, Allied Beverage Group uses artificial intelligence (AI) tools to support the initial review of applications. These tools are designed to assist our recruiters in identifying qualifications and experience that align with the requirements of each role. The tools do not make hiring decisions. All final decisions are made by our recruitment team and hiring managers. We are committed to fair and equitable hiring practices. If you have questions about this process or need an accommodation, please contact Human Resources. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: Hybrid 4 days on-site in Jersey City, NJ Our client seeks a Full Stack Developer with Angular, AngularJS, and Java expertise to build and modernize an internal communications platform. The role will lead design and development across the stack using Angular, Spring Boot, Oracle, and core Java. The engineer will drive code quality with automated testing and CI/CD, mentor peers, collaborate with product and design partners, and resolve performance and scalability issues. The team values enterprise tooling and AI-assisted development to improve delivery speed and reliability. We can facilitate w2 and corp-to-corp consultants. For our w2 consultants, we offer a great benefits package that includes Medical, Dental, and Vision benefits, 401k with company matching, and life insurance. Rate: $85.00 to $89.00/hr. w2 Responsibilities: • Lead architecture, design, development, and maintenance of web applications using Angular, AngularJS, Spring Boot, Oracle, and core Java., • Apply best practices including automated testing, CI/CD pipelines, and code quality standards., • Maintain code quality through reviews, testing, and adherence to standards., • Collaborate cross-functionally to align solutions with business objectives and client needs., • Evaluate and integrate front-end technologies with emphasis on Angular., • Champion enterprise tools and AI-driven automation for engineering and platform operations., • Mentor junior and mid-level engineers to promote learning and technical excellence., • Partner with product owners, design leads, stakeholders, and engineering teams to deliver features with quality and on schedule., • Identify, troubleshoot, and optimize performance and scalability issues. Experience Requirements:, • Strong experience with Angular, AngularJS, and Java development across front-end and back-end., • Hands-on expertise with Spring, Spring Boot, Lombok, JUnit, Swagger, and Oracle., • Experience designing and consuming REST and/or GraphQL APIs., • Leadership experience mentoring development teams., • Knowledge of SDLC, agile methodologies, and DevOps practices., • Familiarity with version control and agile delivery processes., • Experience in internal communications or related marketing and communication domains preferred., • Knowledge of automation tools and AI-assisted development practices., • Preferred exposure to distributed data (Kafka, MQ, Spark), distributed cloud services, Snowflake, C++ or Groovy, and CI/CD tools such as Jenkins, Harness, Ansible, and Docker. Education Requirements: Bachelor’s degree in computer science, engineering, or a related discipline, or equivalent work experience. Recruitment Transparency Notice Eliassen Group values transparency in our recruitment practices. Please be advised that Eliassen Group utilizes artificial intelligence (AI) tools as part of its initial application screening and hiring process. You may receive email and SMS notifications from the Eliassen Virtual Recruiting Team (noreply@eliassen.com, 781-808-2924) inviting you to complete a brief voice screening as part of your application process. These tools assist our hiring teams in different ways, including but not limited to, assistance in reviewing application materials to help identify candidates whose qualifications most closely match the requirements of the position. All AI-assisted evaluations and responses are reviewed by human recruiters before any hiring decisions are made. The use of AI in our process is intended to support fairness, efficiency, and consistency, and Eliassen Group takes measures to prevent bias or discrimination in connection with its hiring practices. By proceeding, you acknowledge, agree, and consent to Eliassen Group’s use of these tools, including AI tools, as part of the application and hiring process. Skills, experience, and other compensable factors will be considered when determining pay rate. The pay range provided in this posting reflects a W2 hourly rate; other employment options may be available that may result in pay outside of the provided range.W2 employees of Eliassen Group who are regularly scheduled to work 30 or more hours per week are eligible for the following benefits: medical (choice of 3 plans), dental, vision, pre-tax accounts, other voluntary benefits including life and disability insurance, 401(k) with match, and sick time if required by law in the worked-in state/locality.If anyone reaches out to you about an open position connected with Eliassen Group, please ensure that you are working directly with us by confirming the following: · When you work with Eliassen Group, all email communication will come from an Eliassen.com address, never Gmail, Yahoo, etc. · Eliassen Group will never ask you for personal information (home address, bank account, or check routing number) until you have worked with someone clearly associated with Eliassen Group. If you have any indication of fraudulent activity, please contact fraud@eliassen.com. About Eliassen Group: Eliassen Group is a strategic consulting firm that helps organizations reach further and achieve more through our technology, business advisory, and life sciences solutions. For nearly 40 years, we have combined exceptional people, deep domain expertise, and intelligent capabilities to expand our clients’ capacity and accelerate meaningful outcomes. We are driven by a purpose to positively impact the lives of our employees, clients, consultants, and the communities we serve. Eliassen is committed to building a diverse and inclusive team from a variety of backgrounds, perspectives, and skills. We are an Equal Opportunity and Affirmative Action Employer and all employment decisions are based on merit, performance, and business needs. Eliassen does not discriminate on the basis of race, color, gender identity or expression, sexual preference or orientation, sex (including pregnancy, childbirth, and related medical conditions), marital status, creed, religion, physical or mental disability, genetic information, military or veteran status, age, ancestry, national origin, citizenship status, prohibited criminal record inquiries of applicants and employees, or any other category protected by federal, state, or local laws. Don’t miss out on our referral program! If we hire a candidate that you refer us to then you can be eligible for a $1,000 referral check!

Job Description BCforward is currently seeking a highly motivated SRE Software Engineer. Job Title: SRE Software Engineer Location: Jersey City, NJ Duration: Temp - 12 months Job Description We are seeking a Software Engineer-Other - Intermediate to join our dynamic team. The ideal candidate will have strong experience in full-cycle application development across multiple technologies and design techniques and a proven ability to design, develop, test, deploy, maintain, and improve secure, resilient software in Agile environments. Responsibilities: • Design, develop, test, deploy, maintain, and improve software using approved toolsets., • Apply multiple design techniques and contribute to architecture and code quality., • Participate in Agile ceremonies and deliver increments within a selected framework., • Implement and maintain CI/CD pipelines and automate testing with TDD practices. Required Skills & Qualifications: • Proficiency in one or more general-purpose programming languages (e.g., Java, Python, C#, or similar)., • Working proficiency with development toolsets for build, version control, testing, and deployment., • Strong understanding of Agile methodologies and experience in at least one common framework., • Knowledge of Continuous Integration, Continuous Delivery, Test Driven Development, cloud development, application resiliency, and security., • Used terraform to create Cloud platform experience (any) will work in lieu of AWS, • Working knowledge across software engineering disciplines including business analysis, development, testing, deployment, maintenance, and continuous improvement. Preferred Skills: • Experience with cloud platforms and related DevSecOps practices., • Hands-on experience implementing automated testing and monitoring for resiliency.

Job DescriptionPlant Automation Engineer Join an industry-leading manufacturer where you'll drive automation, improve production performance, and lead engineering projects that make a measurable impact. This is an excellent opportunity for an experienced engineer to work with advanced automation technologies in a collaborative, safety-focused environment. Job Duties & Responsibilities -Design, program, troubleshoot, and optimize Allen-Bradley PLCs, FactoryTalk HMI/SCADA, and automated control systems supporting high-speed manufacturing operations. -Lead engineering and automation projects from planning through implementation, including budgeting, commissioning, vendor coordination, and documentation. -Partner with maintenance and production teams to improve equipment reliability through troubleshooting, preventive maintenance, and root cause analysis. -Support continuous improvement initiatives by leveraging production data, SQL reporting, and system integration while ensuring compliance with safety and quality standards. Required Skills & Experience -Bachelor's degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, or a related technical field. -5+ years of plant engineering, automation, or manufacturing engineering experience in an industrial environment. -Experience programming Allen-Bradley PLCs using RSLogix 5000/Studio 5000 and supporting Rockwell FactoryTalk HMI/SCADA systems. -Proven project management skills with strong communication and the ability to collaborate across engineering, maintenance, and production teams. Preferred Skills & Experience -Experience in food manufacturing, high-speed packaging, or another regulated manufacturing environment. -Knowledge of SQL, Ignition SCADA, and Lean Manufacturing or Six Sigma methodologies. Salary - 110-120k Apply Today If you're passionate about automation, manufacturing excellence, and leading engineering projects that improve plant performance, we encourage you to apply today. Disclaimer: By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at www.synerfac.com/privacy/ Anthony Borbely aborbely@synerfac.com Synerfac Technical Staffing 732-271-9333

Job Description Join the country’s leading Cardiac PET provider! Cardiac Imaging Inc. (CII) is looking for talented and ambitious professionals to join our dynamic team and improve patient outcomes across the nation. Despite heart disease being the leading cause of death in the US, most physicians and patients do not have access to the leading technology in Cardiology. At CII, our mission is to create a more accessible healthcare system by enabling all physicians to treat their patients with the most advanced technology – all from the comfort of their own practice. Our innovative team drives this mission forward each and every day with our Mobile and Fixed Cardiac PET Solutions. As we continue to grow, we currently have a tremendous opportunity for a GE Service Engineer who is up for the challenge. Summary/Objective: Responsible for providing technical repair and service work in the field or at the hub for GE PET/CT systems, including ensuring equipment in trailers does not interfere with the safety of operation of the trucks and trailers on roadways. Lead or assist with the installation and servicing of medical imaging equipment and provide assistance to Service Engineers, Technicians as well as Apprentices. Repair, replace or install parts and devices with expertise as required. Essential Functions: The following list of essential functions is not intended to be restrictive or all inclusive. The fact that certain duties may not be listed does not limit the assignment of additional and/or other duties. • Independently complete full mobile unit load inspection to ensure secure road safety, including PET-CT and Uninterrupted Power Supply (UPS) secured to specifications, in addition to checking electrical system for fire hazards and safe operation, quarterly or at least bi-annually, or sooner if problems arise. Exercise discretion to identify whether repairs are needed and, if so, what repairs to make., • Complete safety checklist of mobile unit inspection to identify any abnormalities, weekly for local units, or at least 5-6 times per year for remote units. Exercise discretion to identify whether repairs are needed and, if so, what repairs to make., • Perform trouble shooting and field repairs., • Provide phone support for customers and CII clinical staff regarding technical issues in a professional and friendly manner., • Prepare/perform equipment Preventive Maintenance according to specification and documentation., • Submit and fill out all required paperwork and service reports in a timely manner, no later than48 hours., • Preparing equipment for customer installation, including staging system and testing for functionality including Packing, for PET/CT system, PET system, CT system, elution system, computer, laptop, dose calibrator, blood pressure monitor, ECG system, and systems for image data transfer., • Parts testing at hub locations., • Leading installation and deinstalls as required., • Support team members especially service technicians and service apprentices in their trouble shooting, training and guidance for field repairs or preventive maintenance., • Find spare parts if needed or support Inventory specialist in parts' acqisitions., • Attending or performing training classes for existing or new equipment service., • Inspect and report irregularities, cleanliness, defects of CII assets, including mobile and fixed sites., • Maintain tools and calibration requirements., • Always adhere to safety procedures., • Other related duties as assigned. Supervisor Responsibility: This position has no direct supervisory responsibilities. Work Environment: Hub, mobile unit, and/or provider site. Exposure to varying elements (noise, exhaust, weather, etc.) Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job • Physical activity – talking, hearing, balancing, stooping, kneeling, crouching, reaching, standing, pushing, pulling, lifting, grasping, and fingering., • Medium work – exerting up to 50 pounds of force occasionally and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects., • Visual Acuity – The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. The worker is required to have visual acuity to perform an activity such as: operates machines where the seeing job is at or within arm’s reach; performs mechanical or skills trades tasks of a non-repetitive nature. The work is required to have the visual acuity to operate motor vehicles and/or heavy equipment. Travel: Extensive nationwide travel is required for this position, on a moment’s notice if needed, including overnight stays. Qualifications and Requirements: • An Associate’s degree in electronics or equivalent work experience, • Two (2) or more years of experience as a Service Engineer with an established service organization or OEM servicing GE 690 and/or GE 710 PET/CT systems, or completed CII training., • Basic computer skills, MS Suite, • Valid Driver’s license and clean driving record, • Reliable Transportation, • Ability to travel US wide, • Ability to read operating manuals and instructions, • Ability to communicate fluently both verbally and in writing, • Problem-solving skills and ability to exercise independent judgment and discretion, • Knowledge of electronic safety and procedures, low to high voltage, • Electronics/Mechanical background, • Advanced Knowledge of PET/CT and or PET, • Self-driven, motivation to succeed, • Ability to learn company policies and adhere to them in the performance of all assigned duties and communicate any compliance deviations to management in a timely manner Benefits: We believe taking care of our people is the right thing to do. Cardiac Imaging believes that its dedicated employees are its most valuable resource. Employees at Cardiac Imaging are provided with a professional and comfortable work environment, along with a generous benefit package. • Paid Holidays, • Paid Time Off, • Medical/Dental/Vision Insurance, • Flexible Spending Account (FSA), • Healthcare Savings Account (HSA), • Voluntary Short-Term Disability, • Long Term Disability, • Life Insurance/AD&D, • Parental Leave, • Voluntary Life Insurance/AD&D, • Voluntary Accident, • 401(k), • Career Growth and opportunities for advancement, • Cardiac Imaging is an equal opportunity employer that is committed to inclusion and diversity. We take affirmative action to ensure equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected characteristics. Cardiac Imaging is a drug-free workplace and uses E-Verify to confirm the identity and employment eligibility of all new hires., • Employer reserves the right to offer the selected candidate or applicant an hourly rate or salary at an appropriate level to be set and determined by the employer that is commensurate with the applicant’s qualifications, experience, education, skills, training, certifications, or seniority THIS POSITION IS FOR A CURRENT VACANCY AND THE EMPLOYER INTENDS TO FILL THIS POSITION BY 010/31/2026.

Job Description Sourgum is transforming the $100B+ waste and recycling industry through cutting-edge technology that makes waste removal simpler, smarter, and more cost-effective. Our innovative haulsourcing platform powers high-quality waste and recycling services for businesses at significantly lower costs—saving our customers an average of 20%. Leveraging proprietary datasets, an advanced operating system, and a carefully curated network of 5,000+ trusted vendors, we help companies of all shapes and sizes streamline their operations while advancing sustainability efforts. We’re a fast-growing, venture-backed company (just closed our Series A!) on a mission to modernize an outdated industry — and we’re just getting started. Our investors include Spark Capital, Founder Collective, Suffolk Technologies, 186 Ventures, and River Park Ventures, the same funds that backed category-defining companies like Slack, Anthropic, Uber, Venmo, and Amazon Pharmacy. If you’re driven by the opportunity to build something groundbreaking, we’d love to meet you. As an experienced engineer, you will help build our core SaaS platform by working with a small but rapidly growing team to develop, maintain, and deliver this innovative platform. Guided by the roadmap, you will ensure on-time, on-budget software delivery and help grow and mentor our team. Your experience will include recent experience architecting solutions using Typescript/Node or Go microservices. Key Responsibilities The delivery of architecture, design, and implementation of cloud SaaS solutions based on business requirements Development and maintenance of the software platform. Align the results with the requirements of the appropriate stakeholders As a Senior Software Engineer, you will play a crucial role in our team, working closely with the head of engineering and product managers, business unit leaders, and stakeholders. Your responsibilities will include managing engineering, determining team resourcing, and demonstrating your leadership skills and ability to work collaboratively. As a Senior Software Engineer, you will be a key stakeholder in our product engineering. Your contribution will be instrumental in the success of our software solutions, as you will translate business requirements into technical specifications for our engineering team to design and implement. Requirements Technical Skills 9+ years of hands-on in professional software development 9+ years of experience working with relational databases (MySQL, PostgreSQL, Aurora, etc.) Strong understanding of data structures, indexing, and searching required Ability to integrate with Elasticsearch and run queries/reports 3+ years of experience building microservices 3+ years’ experience working with AWS-based services including S3, SQS, SNS, DynamoDB, Lambda, Redshift Experience with Kafka and other technologies Can apply principles of Test-Driven Development Experience with writing test cases Able to write build scripts Experience with Kubernetes and Terraform Experience with version control systems, CI/CD pipeline tools, workflow tools, Jenkins, etc. Experience integrating applications with Redis/Memcached a plus Nice to Have Skills Experience with Flutter Development of mobile and tablet devices AI/Machine Learning experience a plus Experience with Big Query and Metabase Experience developing Vertical SaaS ERP Software Personal Skills A passion for building software and streamlining process issues Demonstrate tenacity when solving challenging problems in a deadline-driven environment Experience with Scrum/Agile Methodologies Ability to lead a team, as well as a roll-up-the-sleeves mentality to work well as part of a team Able to be self-motivated and work independently as needed to solve complex problems Taking pride in work and desire to make projects succeed Benefits Company stock options as part of your compensation package, giving you the opportunity to share in our company's success and build long-term financial growth. A positive and collaborative work environment with a focus on innovation and sustainability. Flexible/Unlimited PTO Comprehensive benefits package including health insurance (medical, dental, vision, LTD, Life Insurance, etc.), retirement plans (401K). Access to hundreds of gyms, studios, and wellness apps—all through one easy membership provided by your Wellhub. Yearly Personal Development Budget Opportunities for professional development and career advancement within a growing company. Compensation Range: $170K - $210K

Job Description SEIU 32BJ Training Fund New Jersey Part-time Fireman - Black Seal Low Pressure Preparation Instructor The 32BJ Training Fund is seeking qualified candidates for a part-time Fireman - Black Seal Low Pressure Preparation instructor for classes taught in Hackensack, New Jersey. About us: SEIU 32BJ is a service union that represents cleaners, maintenance workers, service staff, and security officers in the New York City area and nine other states on the East Coast. Our mission is to educate every member so that they have the tools they need to meet the challenges of a changing industry. Who we’re looking for: • Creative, dynamic teachers with good interpersonal skills who enjoy working in diverse linguistic and cultural settings, • Teachers looking to empower workers through industry skills education Responsibilities: • Teaching concepts related to boiler operations, • Teaching Boiler parts and functions., • Reviews terminology for Stateexam., • Provides practice exams to prepare students for the NJ Black Seal Low Pressure Boiler Operator exam., • Guides students and provides feedback on how to fill out paperwork for DOL exam., • Maintain andsubmitrecords of attendance, • Maintain ongoing communication with supervisor, • Participate in relevant professional development activities, as available Qualifications: • Teaching experience, • Excellent communication skills: verbal and written, • One of these: Black Seal/Blue Seal License/Third class Engineer License, • Strong interpersonal skills and the ability to interact with students from a variety of linguistic and cultural backgrounds, • Ability to use digital platforms to instruct, communicate, and record program data., • Bilingual in English/Spanish is preferred. COVID-19 Considerations: • Record of completed COVID-19 vaccine or confirmed medical/religious exemption, • Compliance with current COVID-19 protocols of the organization Classes offered: • Saturdays,9:00am to1:00pm, • Classes on additional days, times and locations may be available, including weekdays, evenings, and weekends Location(s): • Bergen County Technical Schools, Hackensack NJ Wages and Benefits: • $75per teaching hour, • Paid preparation time, • Paid in-house training, coaching, and professional development opportunities

Job DescriptionWork Location: Fully Remote. Our direct client has an opening for an Security Engineer rec 13810 This position is up to 12 months, with the option of extension the position will be located in Columbia,SC Please send rates and a resume. W2 only Bachelors Degree in an Information Technology, Computer Science, Software Engineering or Information Security related field; 8+ years of relevant experience may be substituted in lieu of education 5+ years of experience in supporting large IT environments, security systems, software development, and/or system deployments Hands-on security engineering experience supporting multiple cybersecurity technologies, systems, integrations, and operational functions. Experience integrating enterprise technologies using APIs, SDKs, web services, structured data formats, authentication methods and vendor-supported interfaces. Strong experience troubleshooting complex technical issues across applications, security platforms, operating systems, networks, identity services and integrations Linux system deployment, configuration, patching, scripting, service management, monitoring, troubleshooting and lifecycle management Experience developing automation and response workflows using Python, PowerShell, Bash, REST APIs, JSON, YAML and vendor SDKs Experience supporting IAM, DSPM, ASM, vulnerability management, email security, endpoint security, SIEM, SOAR, logging, monitoring, cloud security and other enterprise security technologies Strong understanding of enterprise security architecture, incident response, networking, access control, secure software development, systems administration and industry-standard cybersecurity frameworks Preferred Skills After-hours maintenance, incident escalation support, and operational handoffs may be required as needed.

Job Description Mechanical Engineer – MEP/HVAC, Rail & Transit, Vehicle Systems | Woodbridge, NJ Location: Woodbridge, NJ | Full-Time | On-Site Salary Range: $85,000 - $105,000 + Benefits About Garg Consulting Services, Inc. Garg Consulting Services, Inc. (Garg) is a multidisciplinary engineering firm delivering transportation and infrastructure solutions across the Northeast. We're hiring a Mechanical Engineer with 2–5 years of experience to join our Woodbridge, NJ team and support Facility/MEP (HVAC, plumbing, fire protection), railroad/rail transit systems, and rail vehicle engineering projects. Position Overview The Mechanical Engineer will deliver mechanical design and coordination support for MEP/building systems, rail and transit infrastructure, and vehicle systems work-producing drawings, calculations, specifications, and engineering deliverables for projects throughout the region. Key Responsibilities • Support mechanical design across Facility/MEP, Railroad/Rail Transit, and Vehicle Engineering groups, • Design HVAC systems, including tunnel and station ventilation concepts where applicable, • Develop plumbing and drainage layouts for facilities and infrastructure projects, • Support fire protection and life-safety related mechanical system design coordination, • Contribute to mechanical systems in rail stations and vehicle maintenance facilities, • Support onboard rail vehicle mechanical systems (as assigned), • Develop plans, specifications & estimates (PS&E) and support design packages through submission, • Perform load calculations, equipment selection/sizing, and layout development, • Create and revise design drawings/models using AutoCAD, Revit MEP, and/or SolidWorks, • Support field surveys, site visits, and existing-conditions assessments, • Coordinate with civil, structural, electrical, and client teams to resolve interfaces and deliver complete designs, • Apply applicable codes/standards (ASHRAE, NFPA, ASME, ADA) and agency requirements Required Qualifications • Bachelor's degree in Mechanical Engineering (ABET-accredited), • Engineer-In-Training (EIT) certification, • 2–5 years of mechanical design experience (MEP/HVAC, facilities, rail/transit, railroad systems, vehicle systems, or similar), • Working knowledge of HVAC, plumbing, and mechanical systems design fundamentals, • Experience supporting (or strong interest in) rail/transit, railroad systems, MEP, and/or vehicle programs, • Proficiency with Microsoft Office and CAD/design tools (AutoCAD, Revit MEP, and/or SolidWorks), • Strong written and verbal communication skills, • Ability to work effectively in a multidisciplinary team, • Willingness to travel for occasional site visits, • Valid U.S. driver's license and work authorization Preferred Qualifications • Rail or transit project exposure (NJ Transit, Amtrak, MTA, etc.), • Familiarity with tunnel ventilation, fire suppression, train wash systems, pressurization, and/or onboard vehicle systems, • Knowledge of public agency standards and transportation codes Compensation & Benefits • Medical, Dental & Vision Insurance, • 401(k) Retirement Plan with Company Match, • Paid Time Off & Paid Holidays, • Wellness perk: gym membership reimbursement Equal Opportunity Employer Garg is an Equal Opportunity Employer. Employment decisions are based on merit, qualifications, performance, and capabilities, and are made in compliance with applicable federal, state and local laws. Final candidates are required to undergo a background check and a pre-employment drug screening. These screenings may include employment and education verification, reference checks, and a criminal history check as allowed by law. All screenings are conducted in accordance with federal, state, and local requirements, including the Fair Credit Reporting Act (FCRA). Employment offers are contingent upon the successful completion of all required checks.