Trabajos maintenance engineer en Mount Vernon, New YorkCrear alertas

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand Team Member of the Month, Quarter, and Year recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job Description As Maintenance Engineer, you’ll be responsible for performing general maintenance work to ensure hotel maintenance quality and safety standards are achieved and maintained. • The Maintenance Engineer responds to and handle guest and department radio requests in a courteous, efficient, safe manner and follow-up to ensure 100% satisfaction, • Complete maintenance request work orders from all departments in a timely basis, • Perform preventative maintenance assignments on a scheduled basis, • The Maintenance Engineer ensures that equipment is working properly, • 1-3 years of previous hotel experience preferred, • The Maintenance Engineer must be willing and have the ability to work a varied schedule that may include evenings, nights, holidays, and weekends, • Basic knowledge of painting, drywall, HVAC, electrical and plumbing is preferred, • General knowledge of machines and basic hand and power tools, • Ability to work in a fast-paced environment, • Ability to perform job functions with attention to detail, speed, and accuracy, • Ability to stand, walk and move around during entire shift, • The Maintenance Engineer must be able to lift, push, and pull items that weigh up to 50 pounds Salary: $21.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off

Job Description Network Engineer Level 1 The position calls for a hard-working individual looking to grow their career in IT. Their main duties include working alongside the On-site Support Staff with our Network team. This position is ideal for people with a technical aptitude and genuine interest in Technology. Network Engineer will assist senior Network Engineers with support, maintenance and optimization of core network services, devices and communications systems. See Job Description for responsibilities and duties. Monday - Friday Fully on-site

Job Description Were seeking a skilled and motivated Tier 2 MSP Engineer to join our growing team. This full-time, in-office position is ideal for an IT professional with solid hands-on experience supporting and maintaining client systems in a managed services environment. The ideal candidate will have strong skills in Windows Server administration, networking fundamentals, Microsoft 365, and basic-to-intermediate cloud technologies. This role focuses on resolving escalated service requests, implementing standard solutions, and working closely with Tier 1 staff and senior engineers to ensure client systems run smoothly. Key Responsibilities • Systems Support & Administration: Manage and troubleshoot Windows Server environments, including Active Directory, Group Policy, and file/print services., • Networking: Support and maintain network devices, firewalls, VPNs, and connectivity issues., • Microsoft 365 & Cloud Services: Configure and support Microsoft 365 applications, Exchange Online, SharePoint, and Teams., • Escalation Point: Serve as the primary escalation for Tier 1 technicians, resolving moderately complex technical issues and documenting solutions., • Project Assistance: Assist senior engineers with system migrations, upgrades, and other infrastructure projects., • Security & Maintenance: Perform patch management, system monitoring, and basic security hardening., • 5-7 years of IT support experience, preferably in an MSP or similar fast-paced environment., • Strong knowledge of Windows Server environments, Active Directory, and Group Policy., • Working understanding of networking concepts (DNS, DHCP, TCP/IP, firewalls, VPNs)., • Experience with Microsoft 365 administration and basic Azure or cloud technologies., • Familiarity with virtualization platforms such as VMware or Hyper-V., • Communication: Clear and professional in both verbal and written communication., • Customer Service: Friendly, patient, and client-focused approach., • Problem Solving: Strong troubleshooting skills and attention to detail., • Documentation: Accurate in creating and updating technical documentation. Competitive salary based on experience * Health, dental, vision, and life insurance * 401(k) with company matching * Paid training and certification opportunities * Supportive and collaborative work environment * MondayFriday schedule

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. The Senior Controls / Automation Engineer role requires an individual have a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Regional Southern CT / Tarrytown area travel to sites You will: • Lead or work on a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team by developing project schedules and budgets in collaboration with project leadership and identify change orders and justify changes to Project Management ensuring completion of all project deliverables to the satisfaction of the client., • Anticipate and provide solutions to project leadership and/or customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • Act as an automation Subject Matter Expert, • Hands on experience executing automation projects for process plants, minimum of 3-5 years in industry, preferably in Life Sciences domain., • BS Engineering degree or equivalent educational background, • Detail oriented with strong technical aptitude and desire for learning new technologies, • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • Experience working at customer sites supporting the installation & commissioning of equipment and systems., • PLC Programming with Rockwell Studio5000, RSLogix5000, • Ability to program in RLL, SFC and ST, • Plant Pax module definition is required, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off.

Job Description Mavis Tire - Senior Systems Engineer #ZR Mavis Tire has experienced tremendous growth and is in search of a highly motivated, detail-oriented Senior Systems Engineer to support our operations across the country out of our headquarters in White Plains, NY. We are looking for someone who will continually learn and grow with us. You will be part of a growing team of IT experts working to support and enhance the IT environments they manage. Job Description: This position will provide IT infrastructure and operational stewardship, and hands-on implementations. They will drive transformation of the IT infrastructure to leading edge technologies to improve business agility. This is a key engineering role within the IT organization and interfaces closely with internal stakeholders, executive management and internal department heads. The role will ensure reliable infrastructure services; including internal systems, servers, network, unified-communications and technical support services. Responsibilities: • Oversee the deployment and maintenance of datacenter and cloud infrastructure, • Installs, configures, tests and maintains operating systems, applications, database software and system management tools, • Manage and monitor all installed systems and infrastructure including data networks, external connectivity, internally developed applications, 3rd party platforms and systems, network security, servers, storage, and backup solutions, • Responsible for the design and delivery of projects supporting IT strategy and vision, • Manage a mix of long-term projects and short-term service requests with a high degree of flexibility and effective delegation, • Actively promotes the core values of the company within the organization, • Drives integrated teams to deliver business process and technology solutions in support of key internal initiatives by working closely with stakeholders, engineers, developers and vendors, • 5+ years leading the design and implementation of enterprise-level infrastructure, • Deep fundamental technical knowledge of networking, systems/applications, and cloud technologies, • A blend of business, technical, financial, analytical, and communication skills, • Excellent critical/structured analysis, strategic planning and project execution skills, • Knowledge of identity and access management, • Knowledge of scripting languages - Powershell, Python, VBscript, • Hands on deployment and maintenance experience of Microsoft server technologies - Failover Cluster, Hyper-V, • Advanced hands on experience with Microsoft Active Directory including GPO, DNS, DHCP, • Knowledge of email best practices and administration., • Hands on knowledge of Veeam backup and recovery. At Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement. Mavis is an Equal Opportunity Employer Consistent with our commitment to the principle of equal employment opportunity for all individuals, we enforce a zero tolerance policy on discrimination at Mavis. Employment decisions are made without regard to an applicant's or employee's actual or perceived membership in any category or status protected by applicable federal, state or local law. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of the position. Where appropriate, Mavis may provide reasonable accommodation, in order for an otherwise qualified individual to perform the essential functions of the position. Mavis does not seek salary history information from applicants. Job Posted by ApplicantPro

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Director of Engineering Director of Engineering will lead operational, financial, programmatic, and personnel activities for Engineering Operations, ensuring alignment with Montefiore Einstein’s strategic goals. Responsible for day-to-day operations, budgeting, and financial management across Weiler campus, Westchester Square campus, Hutch Towers II, and three external properties totaling 1.2 million square feet. Develops and manages operational initiatives with measurable outcomes, collaborating with stakeholders to set and achieve goals. Prepares reports on financial, clinical, quality, and safety performance. Drives financial improvements and engages staff in progress. Establishes and manages annual budgets, optimizing resource allocation. Enhances Facilities Engineering initiatives to improve patient satisfaction and ensures strong leadership in facilities maintenance and plant operations. Responsibilities: • Lead coordination across Facilities, Construction, Energy, IT, Security, Real Estate, and Telecom. Oversee project kick-offs and ensure compliance with TJC, NYS DOH, and NYC DOB. Collaborate with physicians, nursing, and leadership to align operations with Montefiore Health programs., • Ensure compliance with Environment of Care and Life Safety regulations. Conduct mock surveys, identify gaps, and drive improvements. Oversee facility modifications, ensuring code compliance and timely completion. Manage life safety equipment, risk assessments, and fire safety audits., • Optimize maintenance with proactive asset management. Develop preventative maintenance programs, track schedules, and minimize downtime using a CMS work order system., • Enhance safety and staff development through annual training programs. Manage recruitment, onboarding, and performance to boost productivity and job satisfaction., • Oversee budgets, inventory, and vendor relations to ensure cost efficiency. Conduct audits for financial and operational compliance., • Foster collaboration with stakeholders, set clear project expectations, and drive continuous improvement., • Be ready to respond to campus emergencies and ensure operational excellence. Requirements: • Experience & Leadership: 7+ years in higher education, hospital, or research facilities with increasing responsibilities; 5+ years in a managerial role; Experience managing union employees., • Technical Expertise: Strong knowledge of facility construction and building systems (mechanical, electrical, plumbing, emergency power, roofs, facades). Experience managing inventory., • Project & Operations Management: Proven ability to lead, prioritize, and meet deadlines while delivering projects on time and within budget. Strong analytical, problem-solving, and organizational skills., • Regulatory & Licensing (Preferred): Professional Engineer License, FDNY CAT, Q01 Refrigeration Engineer., • Innovation & Industry Knowledge: Familiarity with advancements in facilities management and commitment to continuous improvement., • Education: Bachelor’s degree required; Master’s preferred., • Interpersonal Skills: Excellent communication, relationship-building, and ability to work independently or collaboratively. Self-motivated with a proactive mindset. Location: Bronx, New York Work Hours: Monday to Friday, 8:30 AM-5 PM Salary: $135,000.00 to $185,000.00 For positions that have only a rate listed, the displayed rate is the hiring rate but could be subject to change based on shift differential, experience, education, or other relevant factors. Diversity, equity, and inclusion are core values of Montefiore Einstein. We are committed to recruiting and creating an environment in which associates feel empowered to thrive and be their authentic selves through our inclusive culture. We welcome your interest and invite you to join us. Montefiore Einstein is an equal employment opportunity employer. Montefiore Einstein will recruit, hire, train, transfer, promote, layoff and discharge associates in all job classifications without regard to their race, color, religion, creed, national origin, alienage or citizenship status, age, gender, actual or presumed disability, history of disability, sexual orientation, gender identity, gender expression, genetic predisposition or carrier status, pregnancy, military status, marital status, or partnership status, or any other characteristic protected by law.

The Plant Utilities Engineer 1 reports to a higher level Plant Utilities Engineer or other trades supervisor, and is responsible for the operation, repair, and maintenance of a variety of heating, ventilation, air conditioning, and mechanical equipment inside and outside of a physical plant; may sup

Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail.

Your Growth Path Engineer - Engineering Supervisor - Chief Engineer Your Focus * Assist with preventative maintenance and complete work orders related to replacing and repairing ceiling tiles, sheet-rockand wallpaper.

Building Engineer Job ID 238062 Posted 16-Sep-2025 Service line Advisory Segment Role type Full-time Areas of Interest Engineering/Maintenance Location(s) White Plains - New York - United States of America About The Role: As a CBRE Building Engineer, you will be responsible for mon

Job Description Company Overview: At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters . We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation to make the communities we serve more sustainable and livable. Our mission is to offer the best combination of multi-modal sharing technology and seamless customer service, so users can unlock joy in their day! We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own solutions. Shifts: Monday to Thursday 10am to 2pm (Part-Time) Are you the person your friends call when something needs to be fixed or repaired? Do you enjoy being hands-on and solving mechanical issues? Are you interested in working in the growing EV shared micromobility industry? If so, you might be the perfect fit for Veo's Repair Technician! At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters. We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation, making the communities we serve more sustainable and livable. We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own creative solutions. Job Summary: Veo is seeking part-time repair technicians to maintain and repair our electric vehicle fleet. This role is ideal for mechanically-inclined professionals who enjoy solving problems, are comfortable working with their hands, and are passionate in helping make our communities safe and sustainable. No electric vehicle experience required but experience (professional or hobby) repairing bikes, scooters, cars, or motorcycles are a great fit. Responsibilities: • Perform comprehensive repairs on Veo's electric bikes/scooters from tightening a bolt to replacing a motor, • Conduct quality checks and routine inspection to ensure all vehicles meet our safety standards, • Follow processes to log and track maintenance record, • Track inventory levels for spare parts on an ongoing basis, • Maintain excellent warehouse organization and set example for teammates, • At least 1+ years of experience in maintenance/ auto repair, • Ability to lift, carry, push and pull electric bikes/scooters weighing up to 80 lbs, • Problem-solving mindset and self-motivated, • Comfortable with navigating and using smartphone apps, • Previous maintenance experience in bikes, scooters, motorcycles, or automotives, • Full-time employees are eligible for: Medical / Dental / Vision coverage, PTO, • Opportunity to help make the community safe and sustainable, • Free Veo credits!, • Flexible work hours Below is the expected salary range for this position. The listed range is a good faith estimate, and exact compensation and total package may vary depending on market conditions and candidate qualifications.Pay Range $18.50—$19 USD

Job Description Shifts: Monday to Thursday 10am to 2pm (Part-Time) Are you the person your friends call when something needs to be fixed or repaired? Do you enjoy being hands-on and solving mechanical issues? Are you interested in working in the growing EV shared micromobility industry? If so, you might be the perfect fit for Veo's Repair Technician! At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters. We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation, making the communities we serve more sustainable and livable. We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own creative solutions. Job Summary: Veo is seeking part-time repair technicians to maintain and repair our electric vehicle fleet. This role is ideal for mechanically-inclined professionals who enjoy solving problems, are comfortable working with their hands, and are passionate in helping make our communities safe and sustainable. No electric vehicle experience required but experience (professional or hobby) repairing bikes, scooters, cars, or motorcycles are a great fit. Responsibilities: • Perform comprehensive repairs on Veo's electric bikes/scooters from tightening a bolt to replacing a motor, • Conduct quality checks and routine inspection to ensure all vehicles meet our safety standards, • Follow processes to log and track maintenance record, • Track inventory levels for spare parts on an ongoing basis, • Maintain excellent warehouse organization and set example for teammates, • At least 1+ years of experience in maintenance/ auto repair, • Ability to lift, carry, push and pull electric bikes/scooters weighing up to 80 lbs, • Problem-solving mindset and self-motivated, • Comfortable with navigating and using smartphone apps, • Previous maintenance experience in bikes, scooters, motorcycles, or automotives, • Full-time employees are eligible for: Medical / Dental / Vision coverage, PTO, • Opportunity to help make the community safe and sustainable, • Free Veo credits!, • Flexible work hoursBelow is the expected salary range for this position. The listed range is a good faith estimate, and exact compensation and total package may vary depending on market conditions and candidate qualifications.Pay Range $18.50—$19 USD

Job Description Job Title: Scheduling Engineer Location: Mount Vernon, NY (or field-assigned project location within the 5 NYC Boroughs) Job Overview: WDF Inc. is seeking an experienced Scheduling Engineer to oversee and manage complex project schedules for large public infrastructure and building projects, including jail facilities. Reporting directly to the Scheduling Manager, the Senior Scheduler will play a pivotal role in tracking, updating, and developing comprehensive schedules to ensure project timelines are met. This is a leadership position requiring a deep understanding of scheduling methodologies, proficiency in Primavera P6, and the ability to collaborate with multidisciplinary teams on large-scale construction projects. Key Responsibilities: • Develop and Manage Schedules: Lead the creation and maintenance of project schedules throughout all phases of construction, from pre-construction through to project close-out., • Track Schedule Performance: Continuously monitor and update project schedules to reflect progress, performance metrics, and any changes in scope or delays., • Collaborate with Teams: Work closely with project management, construction teams, subcontractors, and other stakeholders to ensure timely completion of project milestones., • Time Impact Analyses: Lead the development of Time Impact Analyses (TIAs) for ongoing and completed work, assessing delays and recommending mitigation strategies., • Scenario Planning and Fragnets: Develop fragnets and alternate schedule scenarios to assess potential project impacts and ensure proactive problem-solving., • Lead Schedule Reviews: Conduct regular schedule review meetings with internal teams, clients, and subcontractors, ensuring all parties are aligned on the schedule status and future expectations., • Pull Planning Sessions: Facilitate Pull Planning Sessions with field teams, subcontractors, and consultants to drive collaborative schedule creation and milestone adherence., • Report Creation: Prepare detailed budget analysis reports, cost/revenue projections, and schedule progress reports to present to senior management and clients., • Financial and Resource Loading: Assist in integrating earned value analysis (EVM), cost/resource loading, and scheduling into the project management process., • Project Documentation: Collect and input data into project schedules from change orders, procurement logs, submittals, RFIs, and other essential documentation., • Mentorship: Provide guidance and leadership to junior schedulers and project engineers on scheduling processes, tools, and best practices. Qualifications: • Bachelor’s Degree in Engineering, Architecture, or Construction Management from an accredited institution., • Minimum of 5 years of experience in project scheduling, with a focus on large-scale public infrastructure, commercial buildings, or other major construction projects., • Proficiency in Primavera P6 is essential., • Strong proficiency in Microsoft Office, particularly Excel, for schedule tracking and reporting., • Experience in developing and managing complex project schedules on public-sector projects, including infrastructure and facilities like jails, courthouses, and similar facilities., • Excellent verbal and written communication skills, with the ability to lead schedule review meetings and collaborate with various stakeholders., • Experience with scheduling software tools, including cost/resource loading, earned value management (EVM), and scenario planning., • Ability to manage multiple projects concurrently, prioritize tasks, and provide leadership to junior team members., • Familiarity with public projects, including governmental requirements, regulations, and contract management., • Strong team-building skills and the ability to handle competing priorities in a fast-paced environment. Compensation: • Salary range: $135,000 to $200,000, depending on experience., • Comprehensive benefits package, including health insurance, retirement plans, and professional development opportunities. How to Apply: Interested candidates should submit their resume and project list to . Please include "Scheduler Application - WDF Inc." in the subject line.

Job DescriptionSummary Our client is a leading IT Solutions Company in the Westchester County, NY (Harrison, NY)area and they are in need of aHelp Desk Support Level II+ Technician. An IT Technicians role is to ensure system operation and functionality so that end users can accomplish business tasks. The objective of the IT Technician will be to respond to support requests in a timely manner, be the initial reference point for all IT support related tickets, and to ensure the satisfaction of the end user, among other technical duties. Duties & Responsibilities • Provide support of incoming requests to the service desk via telephone, web portal, email to ensure courteous, timely, and effective resolution of end-user issues., • Provisioning and system setup for new hires., • Prioritize incidents and service requests according to defined processes to meet defined SLAs., • Use remote tools and diagnostic utilities to aid in resolving support requests., • Server administration via Active Directory, File & Print services, DNS, DHCP., • Install antivirus software and ensure virus definitions are up to date., • Server administration via Active Directory, File & Print services, DNS, DHCP., • Network firewall and switch administration and maintenance., • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response.Qualifications & Requirements, • Having worked in an MSP environment is a MUST!, • Minimum of 4 years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • 2-3 years of experience in a client-facing environment such as sales engineering, • Kaseya RMM and Autotask PSA Experience a plus, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management) tool a plus, • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plus, • Having worked in an MSP environment is a major plus.Ideal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert), • CCNA or CCIE-Cisco certifications a real plus Our client offers challenging work, career opportunities, a pleasant work environment, and ongoing training.Employment Type: Full time Location: Harrison, NY

Job DescriptionSummary Our client is a leading IT Solutions Company in the Westchester County, NY (Harrison, NY) area and they are in need of a Help Desk Support Level II+ Technician. An IT Technician’s role is to ensure system operation and functionality so that end users can accomplish business tasks. The objective of the IT Technician will be to respond to support requests in a timely manner, be the initial reference point for all IT support related tickets, and to ensure the satisfaction of the end user, among other technical duties. Duties & Responsibilities • Provide support of incoming requests to the service desk via telephone, web portal, email to ensure courteous, timely, and effective resolution of end-user issues., • Provisioning and system setup for new hires., • Prioritize incidents and service requests according to defined processes to meet defined SLAs., • Use remote tools and diagnostic utilities to aid in resolving support requests., • Server administration via Active Directory, File & Print services, DNS, DHCP., • Install antivirus software and ensure virus definitions are up to date., • Server administration via Active Directory, File & Print services, DNS, DHCP., • Network firewall and switch administration and maintenance., • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response.Qualifications & Requirements, • Having worked in an MSP environment is a MUST!, • Minimum of 4 years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • 2-3 years of experience in a client-facing environment such as sales engineering, • Kaseya RMM and Autotask PSA Experience a plus, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management) tool a plus, • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plus, • Having worked in an MSP environment is a major plus.Ideal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert), • CCNA or CCIE-Cisco certifications a real plusOur client offers challenging work, career opportunities, a pleasant work environment, and ongoing training.

Americas Swimming Pool Company - JobID: 100-166912177 [Cleaning Technician] As a Pool Maintenance Technician at America's Swimming Pool Company, you'll: Provide excellent on-site pool cleaning and pool maintenance services to each and every customer assigned; Manage a swimming pool route that includ

Minimum two years of project management experience in engineering and/or related special projects preferred.

Act as the primary liaison with clients, architects, engineers, and consultants.

Sears Holdings is the leading home appliance retailer as well as a leader in tools, lawn and garden, fitness equipment and automotive repair and maintenance.

Ampcus is a leading global provider of Staff Augmentation, IT and Business Consulting services, specializing in Human Capital Management, Intelligent Automation, Infrastructure Management & Modernization, Cybersecurity & Risk Management, and Testing & IVV services.Ampcus helps organizations improve

Hybrid Project Manager And Executive Assistant.We are a dynamic lighting solutions company dedicated to transforming spaces through innovative commercial and residential lighting projects.Based in a vibrant co-working space in Great Neck, NY, we specialize in curating lighting designs that enhance e

Purpose of Position: The Project Manager will be responsible for initiating, planning, executing and controlling large complex enterprise projects.Organizes work into a manageable plan; secures Executive Staff approval for project scope, budge.

Linde Engineering Americas (LEA) is a member of the Linde Engineering Division of Linde plc. Experience in engineering, construction, commissioning or start-up of oxygen and nitrogen gas plants is a plus. LEA is a single-source technology, engineering, procurement and construction firm focused on pr

Lane Valente Industries is a leading international construction and facility maintenance company with offices throughout the U. Plans new or modified installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent

Meet regularly with Superintendent(s) and/or Project Engineer(s) to review and coordinate upcoming work and needs such as equipment, material, and subcontractors. Coordinate with Project Engineer(s) and Superintendent(s) to ensure conformance with contact documents. Degree in Civil, Mechanical, or C

Project Manager (People Team & Systems Implementation).Everyone on our team has earned a CPC (Certified Personnel Consultant) or CTS (Certified Temporary Staffing Specialist) accreditation from the National Association of Personnel Services.We are experts at staffing and recruiting with more than 16

Bachelor's degree in Civil Engineering, Construction Management or similar from an accredited institution and 10 or more years of building construction experience. Knowledge of construction cost, scheduling, estimating, purchasing, and engineering principles and techniques, as well as accounting pri

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Professional Engineer (PE) license or CCM Certification preferred.

Commercial Flooring Project Manager/Estimator Opportunity.I am working with a well-respected, firmly established Commercial Flooring Contractor seeking experienced Project Managers and Estimators.This is an exciting opportunity to become a part of a strong, quickly growing team of dedicated professi

Assistant Project Manager or Project Engineer in commercial construction. Bachelor's degree in Construction Management, Engineering, or a related field preferred.

Commercial Flooring Project Manager/Estimator.I am working with a well-respected, firmly established Commercial Flooring Contractor seeking experienced Project Managers and Estimators.This is an exciting opportunity to become a part of a strong, quickly growing team of dedicated professionals.I am l

Pay Rate: $48/hr Location: Englewood Cliffs Duration: 6 months.Ice Cream Company Ice Cream Workplace Services Manager Scope: Local 6-month full-time temporary position Location: Englewood Cliffs, NJ Client Ice Cream is the largest global Ice Cream Company in the world, with over 100 years of experie

Weil Administrative Staff Opportunity.Weil seeks the best and brightest talent to join our Administrative Staff team.Our employees are the future of Weil so we invest in their training and development.Our environment embraces and encourages positive-minded professionals who seek to be challenged and

Linde Engineering Americas (LEA) is a member of the Linde Engineering Division of Linde plc. Linde Engineering North America LLC. LEA is a single-source technology, engineering, procurement and construction firm focused on providing innovative solutions to customers.

The Project Manager will support a cross functional transformation initiative to improve the consistency, efficiency, and effectiveness of how clients and engagements are evaluated for risk exposure across the global organization.The Project Manager will manage the day-to-day activities and delivera

Commercial Flooring Project Manager/Estimator Opportunity.I am working with a well-respected, firmly established Commercial Flooring Contractor seeking experienced Project Managers and Estimators.This is an exciting opportunity to become a part of a strong, quickly growing team of dedicated professi

Review RFI and submittal logs with Project Engineers. Bachelor's degree in Civil Engineering, Construction Management or similar from an accredited institution. Knowledge of construction cost, scheduling, estimating, purchasing, and engineering principles and techniques, as well as accounting princi

Technology and Business consulting services.We are in search of a highly motivated candidate to join our talented team.Job Title: Digital HR Project Manager Location(s): White Plains, NY Project Overview We are seeking dynamic and versatile contingent workers to join our HR department for a period.

Collaborate with warehouse, production, engineering, logistics, and management teams to define project scopes and objectives.

Lane Valente Industries is a leading international construction and facility maintenance company with offices throughout the U. Plans new or modified installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent

Ampcus is a leading global provider of Staff Augmentation, IT and Business Consulting services, specializing in Human Capital Management, Intelligent Automation, Infrastructure Management & Modernization, Cybersecurity & Risk Management, and Testing & IVV services.Ampcus helps organizations improve

Equal Employment Opportunity: CBRE has a long-standing commitment to providing equal employment opportunity to all qualified applicants regardless of race, color, religion, national origin, sex, sexual orientation, gender identity, pregnancy, age, citizenship, marital status, disability, veteran sta

Lane Valente Industries is a leading international construction and facility maintenance company with offices throughout the U.

Degree in Engineering with 10+ years of related experience.

Commercial Flooring Project Manager/Estimator Opportunity.I am working with a well-respected, firmly established Commercial Flooring Contractor seeking experienced Project Managers and Estimators.This is an exciting opportunity to become a part of a strong, quickly growing team of dedicated professi

Project Manager, Special Projects.HQ Operations / Full-Time / Hybrid.Rowan's Special Projects Manager, reporting directly to the Chief of Staff, plays a significant role in advancing critical strategic projects throughout the company.This Project Manager, Special Projects will ensure that the CEO p