Maintenance engineer jobs in Uniondale, New YorkCréer des alertes d'emploi

Position Summary: The Manufacturing Engineer will plan and design product applications and machinery. The position is responsible for organizing highly complex activities for design, development, implementation, and maintenance of heat exchanger manufacturing processes. Supervisory Responsibilities: • None Duties and Responsibilities: • Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, including determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods., • Design, install, and troubleshoot manufacturing equipment., • Identify opportunities and implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts., • Design testing methods and test finished products or process capabilities to establish standards or validate process requirements., • Design layout of equipment or workspaces to achieve maximum efficiency., • Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processes or engineering procedures., • Evaluate manufactured products according to specifications and quality standards, including troubleshooting new or existing product problems involving designs, materials, or processes, • Develop sustainable manufacturing technologies and analyze the financial impacts of sustainable manufacturing, • Provide technical expertise or support related to manufacturing., • Develop, document and implement standard work instructions for critical manufacturing operations. Required Skills and Abilities: • Excellent people and communication skills are required (both oral and written)., • Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation, • Computer literacy in a MRP system (Oracle a plus), Microsoft Office., • Able to work under pressure, • Highly technical and analytical skills such (drawings, schematics, layout), • Able to think out of box., • Project management skills, • Highly organized and efficient, • Possess leadership and interpersonal skills, • Strong problem-solving skills Education and Experience: • Bachelor's degree in Industrial Engineering, • 3-5 years of progressive experience in manufacturing engineering., • Experience in metal fabrication, welding and/or brazing of pressure containing products., • Experience in a highly regulated industry, such as, Military, Aerospace, Nuclear or Automotive or other similar., • Due to ITAR Restrictions, an export license may be required. Other • Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder Compensation Employee Type: Salaried Salary Minimum: $85,000 Salary Maximum: $105,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

The Telecom Engineer role will be responsible for the day-to-day maintenance and management of all call routing within Lightpath. Manage telecom routings to ensure proper call routing and completion. Contribute to telecom engineering and planning strategies for network enhancements.

Job Description Line Engineer (Maintenance Technician) Location: Brookville Hotel @ JFK NEW YORK CITY 154-71 Brookville Boulevard | Rosedale, NY 11422 SUMMARY: Keep all equipment in good repair with a minimum of downtime by providing day-to-day maintenance of the hotel under the direction of Engineering Management. Continually work towards and support the improvement of engineering service to both guests and associates. RESPONSIBILITIES: • Report to work on time and in full uniform., • Train and instruct other members of the staff through sharing of knowledge and skills., • Operate as an independent mechanic by analyzing problems, identifying courses of action, and implementing solutions with available resources and to a high degree of quality., • Keep accurate completion and task records in the project files. Set an example of continuous self-development., • Plunging toilets, unclogging drains, repairing all types of hardware, plumbing, and electrical equipment including lamps, air conditioners and cosmetic items., • Clean, lubricate, protect, and otherwise maintain all tools and equipment in the hotel. See that all tools used are returned to the shop and secured in proper storage area., • To protect and otherwise maintain your assigned tool pouch and its tools at the discretion of the Engineering Management., • Monitor systems as necessary, to be fully informed of the system operation and to handle emergencies involving the systems., • Have a working knowledge of fire sprinkler and emergency power systems. Observe and analyze energy and utilities usage in the hotel and on the grounds., • Look for ways to conserve energy and report any ideas to the Engineering Management., • Be available for any emergencies and act in an engineering capacity to protect our guests and associates, and preserve the building and its systems during the emergency., • To act as quickly and responsibly as possible to return the building to its normal operating status. To inform Engineering Management of any such emergencies., • Be aware of all existing departmental Job Safety Analysis and to strive to work in an accident-free manner and to create a safe work environment for others., • Continuously look for conditions which may endanger associates or guests of the hotel and to take immediate action to correct any hazardous conditions found., • Read, log, track, and interpret readings from meters, gauges, and other measuring units., • Maintain a thorough log of each day’s activities and problems that occur and to ensure this information is passed on to other shifts., • Clean all engineering areas as directed by Engineering Management., • Work in a neat and efficient manner, keeping work areas clean and well organized., • Serve as otherwise directed or needed to help maintain the effective and efficient operation of the hotel at the discretion of Engineering Management or the hotel General Manager., • Complete all work assigned in a safe and professional manner. Maintain communications with supervisors to ensure that all needed materials, tools, and supplies are available or on order., • Follow up on any items that may be on back order. Keep supervisor updated on assignments., • Provide training and technical advice to other engineers as needed or requested., • Maintains a working knowledge of all federal, state, and local laws, codes, and regulations., • Maintains a professional image at all times., • Maintains the hotel facility and related equipment in a safe and efficient manner., • Provides for a safe work environment by following all safety and security procedures and rules., • Reads, learns, understands, and refers to the Standard Operating Procedures., • Each associate will be required to follow the rules as found in the M&R Employee Handbook. Performs other duties as assigned by management, of which employee is capable of performing

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at Position Summary: TTM is an advanced-technology leader in highly sophisticated surveillance, communications, analysis and integration solutions. Our systems are deployed across a wide range of land, sea and air applications, providing our aerospace, defense and commercial customers with a distinct tactical advantage. In this role, the PCB Staff Design Engineer will design moderate to complex printed circuit board (PCB) layouts in the domain of Digital, Analog, Power & RF interconnect applications. This includes responsibility for circuit board layout conceptualization, (CAD application by means of Siemens Xpedition, PAD's or Cadence Allegro tool sets), detail design activities and value-engineering in support of internal TTM programs. Areas of emphasis/focus include physical design (CAD implementation)/documentation utilizing best practice of electrical IPC standards/methodologies with experienced approach to manufacturing and sustaining maintenance of legacy design projects. Complementary support provided by a combination of TTM Management, Field Application Engineering, Electrical/Mechanical Engineering and NPI Manufacturing teams. Duties and Responsibilities: Design Engineering Physical Design • PCB concept sketches for assistance in design layout estimating, • PCB design suggestions/trade-offs regarding initial engineering inputs, • Support changes to existing schematic diagrams using TTM suite of tools: OrCAD and/or DxDesigner \n • Place and route components ensuring that all electrical and physical specifications meet the detailed design requirements for each PCB design. Utilization of Siemens Xpedition/PAD's and/or Cadence Allegro required\n, • Participate in design reviews, interface with electrical, mechanical, manufacturing and process engineers to design proto-type and production printed circuit boards in accordance with TTM standards and quality procedures\n, • Collaborate on assigned projects closely with Si (Signal Integrity) or various engineering disciplines, fellow designers and Program \n\n Leadership \n • Provide layout feedback to design engineers as needed to ensure functionality and manufacturability of PCB designs\n, • Create fabrication and assembly drawings (AutoCAD 2023), parts list & incorporate changes to existing design documentation. Create and maintain component libraries\n\n\n, • Generate all output files (ODB++, Bill of Materials & PCB/CCA documentation) required for the manufacture of the board and assembly\n, • Maintain change (PCN) responsibilities on re-design and documentation updates\n\n Industry and TTM-specific electrical standards and methodologies- \n • Product safety and EMI consideration during eCAD layout (UL, CSA, NEBS, Etc.)\n, • Standardization of electrical components and eCAD libraries utilizing IPC or vendor specific standards\n, • Exceedingly experienced with High-Speed PCB Design Constraints: Differential Pairs, Routing Topologies, Controlled Impedance, Length-matched Traces and Delay Tuning\n, • Demonstrated experience with RF PCB routing complexities. Implement layout rules for RF transmission lines (Micro-strip & Coplanar Waveguide), signal line isolation practices, via fencing & unique RF routing structures\n, • Audio (Analog & Digital separation) PCB best practice layout guidelines highly recommended\n, • Direct design experience related to multi-layer CCA and Flex PCB technologies \n, • Current knowledge of µ-via/HDI layout methodologies and best practices\n, • Understanding of stack-up materials/construction along with impedance modeling requirements\n\n Education and Experience: Education: Minimum Associates in Electrical Design/Drafting or BS in Electronic Technology. Related eCAD training certification/career experience will be considered in lieu of a degreed program with 10 year experience. Experience: Minimum of 10 years' experience with primary hands-on demonstrated proficiency of Siemens PAD's (VX2.8 or later), Siemen's Xpedition (VX2.14 or later) and/or Cadence Allegro/OrCAD (17.4 or later) product experience is required. Comprehensive understanding of electrical and mechanical engineering design practices related to printed circuit board electrical drafting and fabrication drawing creation experience is essential. Necessary familiarities with electrical design utilizing IPC standards, IAW IPC-2221/3 and associated specs is critical. Knowledge and methodology utilizing standard IPC Class III approach to design and manufacturing concerns is also necessary. BS or related degree in engineering or a related discipline \n • Related PCB design for the Aerospace and Defense sectors is preferred.\n, • CID/CID++ Certification for PCB Designers highly recognized as professional validation of design, documentation, and manufacturability skills within the industry.\n, • Solid oral communication and interfacing skills with technical and manufacturing personnel to resolve engineering tasks. Propose alternatives when faced with challenging PCB design situations including resolutions to non-standard problems.\n\n, • Appropriate understanding of vendor component data sheets for creation of schematic library and/or PCB footprints expected.\n #LI-VT1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $99,150 - $174,367 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Job Description Johnson Service Group (JSG) is currently looking for a CNC Machinist with Omni turn or Swiss style machine experience. This is a direct hire opportunity with a world leading manufacturer of mechanical components located in Hicksville NY. Pay: $31 to $36/hour 9:00pm-6:30am (30% night differential) This position is responsible for set up and operating of CNC Mori Seki multi-axis lathes, mills, mill/turns or Swiss style machines to fabricate metal into a precision part that was designed by an engineer to a set of specifications for use in mechanical equipment. Duties: • Review work order specifications and tool sheet for each job order., • Assure that tool sheet and provided tools correspond to each other and to the job order being produced and understand how new tools that were designed for a specific job are to be used., • Ascertain that the correct raw material and quantity of materials are provided and corresponds to the work order., • Obtain computer program required to create part and download into computer system of the correct machine being used., • Perform machine set up by correctly positioning tools and raw materials into machine, review program and check all for accuracy., • Run machine tool by tool, making adjustments as necessary and work with Foreman to investigate any issues that arise., • After assuring that all is ready to run, produce one piece to create sample and submit for inspection., • Production of piece includes the machining of parts to specifications using machine tools such as lathes, milling machines, grinders and performs inspection using gauges, micrometers and calibers., • Once sample has been approved or adjustments required to be approved have been ascertained, machine parts to specifications. Align and secure holding fixtures, cutting tools, attachments, accessories and materials onto machines and monitor the feed and speed of machines during the machining process., • After completion of job, return computer program and tools with list to appropriate department, sort scraps and dispose into designated areas. Education/Experience • Degree in Manufacturing or Engineer Certification from Technical Institute or equivalent with at least 5 - 10 years’ of on the job training., • Must have experience with CNC Mill, lathe, mill-turn or Swiss Lathe., • Experience with G code machine programming in corresponding machine technology., • Knowledge of machines and tools, including their designs, uses, repair, and maintenance, raw materials, production processes, quality control, and other techniques for the manufacturing process. Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with over 35 years of experience investing in people and companies. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. Company DescriptionOur people and culture make JSG a great place to work. JSG’s mission is to empower people, help our clients reach their goals, and hire motivated individuals. Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. We are always looking for great people to join our team—we want to see your success here at JSG! We can be found locally in more than 30 offices throughout the United States and Canada. JSG continues to work diligently to offer our clients and candidates world-class service and diversified offerings to fit their evolving needs. We offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.Our people and culture make JSG a great place to work. JSG’s mission is to empower people, help our clients reach their goals, and hire motivated individuals.\r\n\r\nJohnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. We are always looking for great people to join our team—we want to see your success here at JSG! We can be found locally in more than 30 offices throughout the United States and Canada. JSG continues to work diligently to offer our clients and candidates world-class service and diversified offerings to fit their evolving needs.\r\n\r\nWe offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more.\r\n\r\nJohnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Job Description Senior Manufacturing Engineer About the Role: The Senior Manufacturing Engineer will lead the development and optimization of advanced manufacturing processes within an ISO 13485-certified environment. This role focuses on continuous improvement, lean manufacturing, and precision CNC machining to enhance product quality, reduce costs, and streamline operations. The position requires strong technical expertise, hands-on process leadership, and experience mentoring junior engineers in a fast-paced, high-precision production setting. Responsibilities: * Develop, implement, and optimize manufacturing processes to meet quality, efficiency, and regulatory standards. * Lead process validation, documentation, and improvement efforts in compliance with ISO 13485 and related quality systems. * Utilize lean manufacturing, continuous improvement, and 5S principles to enhance operational performance and reduce waste. * Evaluate and refine CNC machining operations, tooling design, and process flow for precision manufacturing. * Conduct cost estimation, process analysis, and capacity planning to support new and existing product lines. * Oversee the installation, testing, and maintenance of manufacturing equipment and production systems. * Mentor and train junior engineers, providing technical guidance and professional development support. * Collaborate with cross-functional teams to resolve production challenges and implement process improvements. * Ensure manufacturing practices adhere to safety, quality, and environmental regulations. * Identify and integrate automation and digital manufacturing technologies to drive process innovation. Qualifications: * Bachelors degree in Mechanical Engineering, Manufacturing Engineering, or a related technical discipline. * Minimum of 10 years of manufacturing engineering experience, with at least 5 years of continuous tenure at one organization. * Proven experience working in an ISO 13485-certified or other regulated manufacturing environment. * Expertise in CNC machining processes, tool design, and process optimization. * Demonstrated application of lean manufacturing, continuous improvement, and 5S methodologies. * Strong knowledge of CAD software, project management tools, and data-driven process control. * Exceptional analytical, problem-solving, and communication skills. * Proven ability to manage complex projects and lead cross-functional teams. * Commitment to quality, safety, and compliance in all manufacturing operations. Desired Qualifications: * Six Sigma Green Belt certification or equivalent process improvement training. * Experience mentoring and developing engineering talent within a manufacturing organization. * Familiarity with automation, robotics, and advanced manufacturing technologies. * Background in medical device manufacturing or other precision, high-regulation industries. * Strong record of driving measurable cost reductions, efficiency gains, and quality improvements. This position offers a competitive salary, comprehensive benefits, and the opportunity to lead impactful process improvements in a world-class, ISO-certified manufacturing environment.

Job Description Candidates must live in the NYC area Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries, is currently seeking an experienced Firmware Engineer. The role requires the successful candidate to work onsite at Parabit's facility for the first sixty (60) days. Following this initial onsite period, the position may transition to a remote role, subject to performance and business needs. Candidates may reside outside the NYC area; however, any lodging or travel expenses associated with the initial onsite period shall be the responsibility of the candidate. Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries, is currently seeking an experienced Firmware Engineer to participate in all aspects of the design and maintenance of hardware and firmware for its products. Candidate needs to demonstrate the ability to use appropriate development tools, compilers, and simulation. Must be capable of working within a team environment to plan, organize, execute and thoroughly document complex system designs. Test and debug skills are necessary; must understand interoperability of hardware and software. Must be able to manage and support multiple tasks on a consistent basis, while providing the highest level of service. Good verbal and writing skills are necessary. Full life-cycle software development; programming to include conceptual design, general coding, release to manufacturing testing, and quality assurance. Candidate needs to be able to produce final release software for manufacturing including associated documentation. Job Requirements: • A qualified candidate must have a BS or higher with 10+ years of relevant applied experience in Computer Science or Electrical Engineering. The ideal candidate will have a clear understanding of and hands-on experience with microprocessor firmware development., • Experience with Microcontroller competencies: Microchip, Nordic ARM cortex., • Experience with writing bootloaders for microprocessors on new and existing PCBAs., • Experience with writing embedded firmware in C for a Real-Time Operating System (RTOS)., • Experience with Bluetooth/NFC implementation., • Experience with network communication protocols (TCP/IP, UDP), • Experience with common communication protocols (I2C, SPI, RS485/RS232 and USB), • Experience with Microchip's Tools - MPLAB / MPLAB X / Harmony, • Experience developing embedded / IoT device software / firmware., • Knowledge and experience with analog, digital and embedded systems design, development, test engineering, and manufacturing., • Ability to read hardware block diagrams, schematics, and wiring diagrams., • Must be capable of thoroughly documenting complex system designs. Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Field Service Technician - CNC Machinery - North Hempstead, NY Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain CNC Machine Tool Routers Grinders Saws Cutters Lathes Mills Millers Machining Centers Robot Loaders _.Seeking highly experienced CNC Service Te

We're looking for a skilled, enthusiastic colocation operations engineer to help organize and operate several colocation facilities from an infrastructure maintenance and upgrade prospective. This position is responsible for the support of the planning, designing, and engineering of power and space

Job Description Live-In Superintendent Residential Community (2-Bedroom Apartment Provided) Position Summary We are seeking a reliable and hands-on Live-In Superintendent to oversee the daily maintenance and operations of a residential community. This position includes a two-bedroom apartment as part of the compensation package. The ideal candidate is proactive, mechanically skilled, and committed to maintaining a safe, clean, and well-functioning property for residents. Responsibilities • Perform routine maintenance and repairs, including plumbing, electrical, carpentry, painting, and basic HVAC, • Conduct daily inspections of building systems and common areas, • Respond promptly to maintenance requests and building emergencies, • Coordinate and supervise outside vendors and contractors as needed, • Maintain cleanliness and organization of common areas, mechanical rooms, and exterior spaces, • Oversee trash and recycling operations, • Monitor building safety, security systems, and fire/life safety equipment, • Assist with apartment turnovers, including light renovations and inspections, • Maintain accurate maintenance logs and communicate regularly with property management, • Prior experience as a superintendent, building engineer, or maintenance professional in a residential setting, • Strong working knowledge of building systems and general repairs, • Ability to work independently and manage multiple priorities, • Excellent communication and customer service skills Salary: $60,000 - $70,000 + 2 bedroom Apartment