Medical assembly jobs in Hempstead, New YorkCreate job alerts

Job DescriptionLocation: New Hyde Park, NY Schedule: M – F, 7 AM – 3:30 PM Reports to: Shop Manager Salary Range: $17 – $21/hour + benefits Power-Flo Technologies is now hiring a Panel Shop Helper to join our UL Certified Panel Shop in New Hyde Park. You will strive to provide safe electrical systems for a variety of customers. Panel Shop Helper Responsibilities : You will assist the technicians and gain experience with the following: • Reading and following electrical schematics, • Laying out panel backplates, • Wiring panels in the shop based off a schematic, • Assembling of various electrical components, • Installing and repairing electrical equipment and fixtures, • Installing various types of raceway and cable tray systems, • Troubleshooting motor and control systems, • Performing routine maintenance on electrical wiring and systems, • Adhering to all quality and safety codes, • Installing and repairing electrical equipment and fixtures, • Building Panels UL 508, • Panel assembly and box build assembly Panel Shop Helper Qualifications : • Previous experience, training, or schooling in electrical work, • Familiarity with electrical equipment and hand tools and other power tools, • Willingness to learn, • Current, valid, and clean NYS driver's license to operate company vehicles as needed Physical Requirements • Ability to stand for up to 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions, • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery Our Core Values • Our People, • Relationships, • Innovation, • Sustainability, • Growth, • Determination Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at Summary: Assembles/disassembles electronic equipment or systems ranging in complexity from simple to highly complex for repair, rework and modification. Removes and replaces discrete components and microcircuits, installed using through hole and surface mount technology. Reworks damaged/defective printed circuit boards using various techniques and tools. Modifies units based on Engineering notes, schematics PCNs or rework instruction. Provides feedback to Service Center management and Engineering as necessary regarding product improvements or changes to ease assembly or modification. Simple to moderate level testing and troubleshooting. Occasional travel to support field modifications at customer sites. Essential Duties & Responsibilities: \n • Utilize various soldering techniques to remove/replace wires, resistors, capacitors, microcircuits and other discrete components, etc. from circuit boards, chassis, etc.\n, • Review and analyze sketches and drawings of parts and assemblies prepared by shop management or Engineering to determine how a unit is assembled and suggest changes when necessary.\n, • Document work performed on standard company forms or electronic data collection devices.\n, • Perform continuity testing, operate manual or ATE test equipment to supplement Service Technicians when necessary.\n, • Support onsite repairs or modifications at customers' facilities.\n, • Assist in training lower grade associates.\n, • Perform additional tasks as may be directed by Departmental Management\n\n Skills: \n • High school diploma or GED\n, • 8-10 years experience on an electronic production assembly line or service repair facility assembling reworking/repairing complex or highly complex electronic equipment\n, • Ability to read and comprehend drawings, sketches, written assembly instructions and procedures written in English\n, • Ability to communicate suggestions and ideas to improve products or procedures to department management\n\n #LI-CG1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $55,158 - $87,185 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at Summary: Assembles/disassembles electronic equipment or systems ranging in complexity from simple to highly complex for repair, rework and modification. Removes and replaces discrete components and microcircuits, installed using through hole and surface mount technology. Reworks damaged/defective printed circuit boards using various techniques and tools. Modifies units based on Engineering notes, schematics PCNs or rework instruction. Provides feedback to Service Center management and Engineering as necessary regarding product improvements or changes to ease assembly or modification. Simple to moderate level testing and troubleshooting. Occasional travel to support field modifications at customer sites. Essential Duties & Responsibilities: \n • Utilize various soldering techniques to remove/replace wires, resistors, capacitors, microcircuits and other discrete components, etc. from circuit boards, chassis, etc.\n, • Review and analyze sketches and drawings of parts and assemblies prepared by shop management or Engineering to determine how a unit is assembled and suggest changes when necessary.\n, • Document work performed on standard company forms or electronic data collection devices.\n, • Perform continuity testing, operate manual or ATE test equipment to supplement Service Technicians when necessary.\n, • Support onsite repairs or modifications at customers' facilities.\n, • Assist in training lower grade associates.\n, • Perform additional tasks as may be directed by Departmental Management\n\n Skills: \n • High school diploma or GED\n, • 8-10 years experience on an electronic production assembly line or service repair facility assembling reworking/repairing complex or highly complex electronic equipment\n, • Ability to read and comprehend drawings, sketches, written assembly instructions and procedures written in English\n, • Ability to communicate suggestions and ideas to improve products or procedures to department management\n\n #LI-CG1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $55,158 - $87,185 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at Summary: Assembles/disassembles electronic equipment or systems ranging in complexity from simple to highly complex for repair, rework and modification. Removes and replaces discrete components and microcircuits, installed using through hole and surface mount technology. Reworks damaged/defective printed circuit boards using various techniques and tools. Modifies units based on Engineering notes, schematics PCNs or rework instruction. Provides feedback to Service Center management and Engineering as necessary regarding product improvements or changes to ease assembly or modification. Simple to moderate level testing and troubleshooting. Occasional travel to support field modifications at customer sites. Essential Duties & Responsibilities: \n • Utilize various soldering techniques to remove/replace wires, resistors, capacitors, microcircuits and other discrete components, etc. from circuit boards, chassis, etc.\n, • Review and analyze sketches and drawings of parts and assemblies prepared by shop management or Engineering to determine how a unit is assembled and suggest changes when necessary.\n, • Document work performed on standard company forms or electronic data collection devices.\n, • Perform continuity testing, operate manual or ATE test equipment to supplement Service Technicians when necessary.\n, • Support onsite repairs or modifications at customers' facilities.\n, • Assist in training lower grade associates.\n, • Perform additional tasks as may be directed by Departmental Management\n\n Skills: \n • High school diploma or GED\n, • 8-10 years experience on an electronic production assembly line or service repair facility assembling reworking/repairing complex or highly complex electronic equipment\n, • Ability to read and comprehend drawings, sketches, written assembly instructions and procedures written in English\n, • Ability to communicate suggestions and ideas to improve products or procedures to department management\n\n #LI-CG1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $55,158 - $87,185 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Job Description iRocket is developing reusable, fully autonomous small launch vehicles to deliver more frequent, lower-cost access to space. We work across propulsion, structures, integration, and test domains, building toward an era of responsive launch systems. The Role: We are seeking a Manufacturing Technician to support the fabrication, assembly, and integration of structural and mechanical subassemblies for our rocket hardware. You’ll work closely with manufacturing and quality engineers to build reliable flight hardware in line with strict aerospace standards. • Manufacture and assemble flight hardware using methods such as drilling, fastening, bonding, and other mechanical processes, • Use precision calibrated tools (e.g. torque wrenches, micrometers, calipers), • Read and interpret technical drawings, blueprints, and work instructions, • Follow procedures, specifications, and test instructions to ensure hardware is built to design requirements, • Collaborate with manufacturing engineers and quality personnel to develop, refine, and document work instructions, • Ensure production tasks are completed on schedule, safely, and to the required quality, • High school diploma, GED, or equivalent work experience, • Strong communication and collaboration skills, • Ability to interact effectively (verbal and written) with engineering, production, and quality teams, • Experience in New Product Introduction (NPI) or development environments, • Precision drilling experience (tolerance ~ ±0.001 in), • Experience in aerospace, aviation, military, medical device, or other high-reliability industries, • Ability to read and interpret advanced technical drawings, manuals, and reports, • Proficient use of precision measuring instruments, • Experience working in cleanroom or controlled environments, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Power-Flo Technologies is seeking an assembler to join our New Hyde Park shop. We design and build custom switchboards and panelboards for a variety of customers. Full Time, Monday - Friday, 7 AM - 3:30 PM. Pay Range: $18 - $22/hour Competitive Benefits Package • Health coverage (medical, dental, vision), • PTO and Paid Holidays, • 401K Assembler Required Skills • Previous experience or training in a shop/industrial setting, • Mechanically inclined, • Familiar with taking measurements and working with a ruler, • Familiar with assembling components, • Able to follow instructions in a proper manner, • Familiar with shop tools (hand tools, power tools, etc), • Valid and clean driver's license to operate company vehicles as needed Assembler Daily Tasks • Reading and understanding blueprints prior to starting a project, • Sourcing the materials to be used in the project, • Measuring and cutting materials to specifications, • Assembly of switchboard enclosures and interior electrical components, • Preparing metal surfaces for finishing, • Working with design team to complete switchgear packages, • Checking finished work to make sure that it falls within the tolerances marked on the blueprints, • Preparing completed packages for shipment Assembler Physical Requirements • Ability to safely use and lift equipment weighing 50 lbs., • Ability to work standing up to 8 hours per day., • This position occasionally requires sitting, climbing, balancing, stooping, kneeling, crouching, and crawling., • Exposure to dust, loud noise, and temperature changes. Candidates must have a valid and clean NY State driver's license to operate company vehicles as needed. About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries is currently seeking Bench Technicians/Electronic Assemblers. The suitable candidate should have some experience with mechanical, electrical assemblies, some soldering experience and should be familiar with basic test equipment. This position focuses on assembling electronic equipment such soldering wires onto switches and integrating the switches into metal housings as well as packaging the finished product. You will also be integrating circuit boards into enclosures, wiring them and final testing the equipment once completed the data must be entered into a data base so basic computer skills are required. Essential Requirements: • Strong work ethic, • Minimal soldering experience, • Basic knowledge of hand tools, • Mechanically inclined, • Follow assembly & test procedures, • Maintain a safe and organized work area, • Must be able to read a wiring diagram, • Document and submit all failures of equipment to engineering QA Department, • Maintain quality control on the production of all equipment assembled, • Ensure all company equipment and tools are in proper working condition, • Maintain manufacturing records of all products Education / Experience Requirements: Qualified candidates must have some education in digital electronics and can be entry level but 1+ year of electronics assembly work is preferred as well as basic soldering skills and the knowledge of electronic test equipment such as DVM's is required. Experience with Microsoft Office and Outlook is a plus. Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life, • PTO Parabit Systems is focused on growth and growing leaders. Parabit Systems is an equal opportunity employer, offering a great work environment, and challenging career opportunities. Please email your resume to . All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description Director of Manufacturing - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree in engineering, Manufacturing Engineering preferred, or other technical-related discipline is required; MBA or other relevant advanced degree is preferred., • Minimum 8 years of experience in a manufacturing environment, including managing salaried and hourly staff., • Minimum 5 years of experience using continuous improvement methodologies, LEAN, Six Sigma, etc. is preferred. SUMMARY OF POSITION The Director of Manufacturing Engineering (ME Director) is responsible for supporting business goals, including product cost and quality, schedule adherence, and timely delivery to meet customer demand. It is a hands-on position responsible for ensuring that manufacturing processes, tooling, and equipment support the business's Safety, Quality, Delivery, and Productivity goals. This ME Director plays an integral part in plant operations, special projects, and is responsible for developing and maintaining a motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain, and Production in support of the departmental objectives. SUPERVISORY RESPONSIBILITIES • The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain, and Production in support of the departmental objectives. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Responsible for developing the standard processes used to manufacture heat exchangers, including selection and definition of all tooling, equipment, fixtures, and anything else related to the process. The team is responsible for ensuring all production processes are defined using the standard work formats and templates, as well as creating any training documents required to ensure production operators can perform the work in accordance with the documented standard., • Design and develop any tooling or fixtures needed to support the production processes., • Support the Operations team in the achievement of KPI’s related to shipping volume targets, on-time delivery, past due backlog, customer lead time, efficiency, utilization, and overtime premium expense., • Support and drive continuous improvements in manufacturing metrics, including quality, yields, cycle time, productivity, and cost. Promote process improvement, LEAN manufacturing methodologies, and 5S processes., • Implement and drive continuous improvement activities through the implementation ofthe change management process and best practices., • Timely and thorough implementation of engineering changes. Actively partner in the creation and review of engineering changes when needed., • Establish and monitor overall performance for product and quality standards; recommend process improvements/quality control programs. Recommend changes in work practices to improve production standards and product quality., • Ensure the ME team is properly deployed to support the daily needs of the business, new product introduction, cost reduction projects, or other duties as needed., • Oversee the Operational Excellence (cost reduction) plans for the site. Coordinate and manage the projects at a tactical level and develop the project tracking tools to report out to senior management., • Coordinate, review, and present data for the purchase of capital equipment and tooling improvements to audiences at various levels of the company., • Provide technical support and recommendations to both internal and external customer technical/quality teams regarding process improvements, non-conforming parts, defects, and repair/rework., • Author annual performance reviews and develop continuing education and advancement paths for the entire department., • Provide oversight for manufacturing activities in our Mexico facility., • Minimal travel expected. Potential travel to a facility in Mexico in support of overall business objectives. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Must possess solid analytical skills in forecasting and anticipating production needs and capabilities., • Must be able to prioritize workload in a multitasking environment, short-term tactical, along with longer-term strategic activities., • Must be able to work independently with minimum supervision and have the ability to interact positively and motivate others, • Excellent verbal and written communication skills; fluency in Spanish is preferred., • Experience with MRP systems, preferably Oracle., • Proficient in Microsoft Office programs, including Teams, Word, Excel, and PowerPoint., • Willingness to work a flexible schedule to get the job done., • Exceptional communication skills; promoting teamwork and a positive work environment., • Experience should include build-to-order manufacturing management experience in medium volume/high-mix production environments, preferably in the military or aerospace industries., • Demonstrated history of successful change management and implementation of operational excellence improvements such as lean manufacturing, demand flow, and six sigma., • Strong ability to communicate with all levels of the organization from the production floor to the executive office; strong interpersonal, leadership, & organizational skills., • Familiarity with assembly, welding, brazing, machining, and testing processes is desired., • Demonstrated knowledge of and familiarity with a variety of lean tools and methodologies, including, but not limited to:, • VSM, Standard Work, Pull Systems & Kanban, Integrated Business Planning, Daily Management, 5S/Visual, • Management, 3P, SMED, TPM, Variation Reduction, and Six Sigma. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $175,000 to $200,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Power-Flo Technologies is currently seeking a Panel Technician to join our Garden City Park shop to provide safe electrical systems for a variety of customers. Panel Technician Responsibilities : • Reading and following electrical schematics, • Laying out panel backplates, • Wiring panels in the shop based off a schematic, • Assembly of various electrical components, • Install and repair electrical equipment and fixtures, • Install various types of raceway and cable tray systems, • Troubleshoot motor and control systems, • Perform routine maintenance on electrical wiring and systems, • Adhere to all quality and safety codes, • Install and repair electrical equipment and fixtures, • Build Panels UL 508, • Panel assembly and box build assembly Panel Technician Qualifications : • Experience with electrical schematics, blueprints, and manuals to construct electrical panels, • Must be familiar with wiring diagram symbols, wire sizing, and panel construction, • Familiarity with electrical equipment and hand tools and other power tools, • Strong problem solving and critical thinking skills to work alongside engineers, • Previous experience in electrical engineering or other related fields, • Valid and clean driver's license to operate company vehicles Our Core Values • Our People, • Relationships, • Innovation, • Sustainability, • Growth, • Health insurance (medical, dental, vision), • PTO program and paid holidays About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Our New Hyde Park shop is looking for a Machinist (manual lathe) to join the team. You will perform typical duties of a traditional manual machinist working with horizontal lathes, vertical milling machine, general machine shop equipment: band saws, Bridgeport drill presses, grinders, as well as some welding. Monday - Friday, 7 AM - 3:30 PM. Machinist Essential Responsibilities • Set up and operate conventional lathes, mills, balancing equipment, and commutator profiler, • Ability to machine housings, shafts, keyways, and sleeves, • Must be familiar with common industry tolerances and fits for motor repair, • Fabricate products to meet established quality standards and the requirements of our customers, • Establish and follow maintenance schedules for shop equipment, • Provide technical expertise as needed, • Maintain a neat and orderly work area at all times, • Organize and maintain personal and shop tools and equipment, • Willing and able to work OT as required Machinist Necessary Qualifications • Manual Lathe experience required, • 5 years' mechanical assembly and disassembly experience, • Ability to read mechanical prints and schematics, • Ability to work independently and in a team setting, • Basic knowledge regarding use of a PC, • Competent with the use of electrical test equipment, i.e. Multi meter, shop tools, hand tools, pneumatic tools, hoists, etc., • Mechanical aptitude and basic understanding of electrical theory required, • Valid and clean NYS driver's license to operate company vehicles as needed Physical Requirements • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions Salary Commensurate with Experience (Range between $22 - $38/hour) Benefits • Health insurance (medical, dental, vision), • 401K, • PTO Program and Paid Holidays We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS. The Power-Flo Technologies family of companies include United Electric Power, Aetna Electric, Long Island Electrical Distributors, Electric Switchboard Solutions, Misa Plumbing, Axis NJ LLC, Power-Flo Pumps and Systems, US Energy Group, Dittman and Greer, AAI, United-Richter, Twinco, Nassor Electric