Medical assembly jobs in Fort Worth, TexasCreate job alerts

Job Description Position: Journeyman Ironworker Job Location: Crowley, TX Position Type: Full-Time • Base Wage: $30-$32 hr, • Crowley Indoor Track Facility Iron Worker Wage Scale $35.82 hr, • $550 per-diem and travel pay if eligible (home must be outside 60 mile radius of job site to receive travel or per diem), • Medical insurance and other insurance benefits available., • 1-week Paid vacation & paid holidays after 1 year of service., • Must be eligibe to work in the US. Required Skills • Bolt-up structural member following blueprints and instructions from supervisors., • Rig structural-steel members to hoist cables, using chains, or cables., • Hoist steel beams, girders, and columns into place, using cranes, or signal hoisting equipment operators to lift and position structural-steel members., • Detail Work: may include installing angle and bent plate, welding clips, joists, tube steel or angle kickers; installing safety cable and safety posts; or shaking out and spreading joists and long spans., • Assembling: Plumbing of structural steel; installing deck; installing and welding steel stairs, handrail and guardrail., • Field fabrication or assembly of metal parts such as steel frames, columns, beams, and girders, according to blueprints or instructions from supervisors., • Use all safety and personal protective equipment for the purpose intended. Use of safety harness and lanyard for proper tie off., • Operate boom lift and scissor lift., • Pull, push, or pry structural-steel members into approximate positions for bolting into place., • Rigger / Signal Person, • OSHA 10, • Aerial Lift

Job Description Fabrication Supervisor Job Summary: This position is responsible for the performance and oversight of high quality, safe, reliable, timely and cost-effective operation of the company’s fabrication department, consisting of the Machine Shop, Sheet Metal Shop, and Paint Shop in support of the company’s production schedule. Job Responsibilities: • Supervise day-to-day operations of the fabrication department., • Assign work orders to machinists, sheet metal workers, and painter and obtain fixtures, special tools, and materials required to complete the fabrication processes and track work order progress., • Coordinate with other department supervisors such as Production Assembly and Inventory Control to ensure parts are available when needed., • Track and analyze work order hours to detect and correct manufacturing deficiencies., • Track and present repair department performance metrics to senior management, as required., • Analyze engineering drawings, sketches, and design data of a part to determine dimension and configuration of cuts, select cutting tools, and establish machining speeds and feed rates., • Write CNC programs to manufacture parts as required by production work orders and approved Request to Production, focusing on minimizing manufacturing costs and optimizing quality., • Upload programs into production CNC machinery, load tooling, and perform set up operations as required by the program., • Operate CNC machines to manufacture parts as required by production work orders and approved Requests to Production., • Store and back up CNC programs in a centralized location., • Maintain a current revision log of CNC programs., • Coordinate with the maintenance department to schedule Preventative and Periodic Maintenance on CNC machines., • Analyze work orders and other applicable documents to determine materials needed, sequence of operations, and equipment required, and assign work to appropriate Machinists., • Train other Machinists in equipment operation and other tasks associated with machining parts., • Working from blueprints and standardized work instructions, perform machine operations on manual Machine Shop equipment such as lathes, milling machines, and grinders, to manufacture parts as required by production work orders and approved Requests to Production., • Devise, construct and maintain fixtures, tools, dies, gauges and equipment to facilitate manufacturing., • Provide technical assistance to the Engineering Department in relation to machining operations and departmental capabilities., • Provide estimates on machining time as required from management., • Education: High school graduate, 3 years technical school preferred; 1 year general machining, 1-year general metallurgic manufacturing, • Experience: Minimum 3 years of CNC programming and operation (GIBBS CAM preferred) and 3 years in general Machine Shop work., • Skills: Must possess strong work ethic and organizational skills. Ability to effectively prioritize and manage competing demands. Ability to provide leadership, supervise and adapt in a dynamic work environment. Intermediate knowledge of shop mathematics. Intermediate knowledge in general and aerospace machining best practice techniques and the ability to read blueprints and data sheets., • Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to stand, reach, grasp, lift and is subject to frequent repetitive motion and vibration. The employee is frequently required to use hands to finger, handle and feel. The employee is occasionally required to sit, walk and hear. The employee must occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision and depth perception. The visual acuity to perform an activity such as: machine set up and usage; visual inspection of parts using precision measuring devices to verify the accuracy of the work performed., • Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee is frequently in an environmentally controlled shop environment. The employee is frequently subject to hazards. Includes working in very close proximity to moving mechanical parts. The noise level is quiet to moderate. We offer an excellent benefits package, including life insurance, comprehensive medical and dental plan, profit sharing and retirement plan, paid holidays, vacation and PTO. Salary will be commensurate with experience, education and ability. EEO/AA/F/M/Vet/Disabled

Job Description Job Summary: We are seeking an Electronic Technician to join our team. Electronic Technicians build up, calibrate, test, troubleshoot and repair electrical and electronic components, circuits, assemblies, and systems. The ideal candidate is detail-oriented, possesses strong organization skills and works well under pressure and with minimum supervision. Job Responsibilities: • Fabricate, calibrate, test, troubleshoot, and repair electrical and electronic components, circuits, assemblies, systems, prototypes, etc. per applicable drawings and specifications., • Inform Assemblers of problems found during checkout and calibration of circuits, assemblies, etc. and train them as required to correct any Quality deficiencies., • Provide training and assistance to Assemblers and less experienced Electronics Technicians as required., • Conduct environmental tests such as temperature, vibration, and shock tests on components and completed assemblies., • Work with Design Engineers and Field Engineers to build up and test prototype systems and mock ups., • High School graduate or equivalent preferred., • Minimum four years’ experience in electronics assembly and repair., • Proficient in the use of standard electronic test equipment., • Familiarity with industry standard electronic assembly and repair techniques., • Must possess a strong work ethic and organizational skills., • Ability to be flexible and work well under pressure., • Ability to read blue prints and data sheets, • Must be able to obtain an FAA Part 145 Repairman’s Certificate for work performed in the Part 145 Repair Station. EEO/AA/F/M/Vet/Disabled Monday - Thursday, 5:45am - 4:30pm 40 Hours Per Week

Job Description Recruiting Location: Longmont/Boulder, CO - IPC600/610 Experience Required The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations. Job Functions: • Experienced quality individual in dimensional and visual inspection of aerospace machined components, • Experience in performing FAI’s – AS9102 (The SI will verify supplier’s FAI, not perform them), • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • MS Outlook, and EXCEL experience, • Mechanical inspection experince preferred, • Strong verbal, written and communication skills, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Work as an effective team member, • Establish and maintain effective working relationships, • Fluent English – reading and writing is required, • Pass pre-hire background check including DMV and credit screening, • Pass Pre-hire Drug Screening Supervision Received:, • The work is performed under general supervision, • U.S. Citizenship required Preferred Education and Skills (including certifications): • 3+ years’ experience as a quality inspector, technician, or engineer., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Outlook and Excel, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be considered, • 12 days paid vacation first year, increasing with service years, • 6 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Company DescriptionTRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Thank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications. TRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans. NOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,TRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain.\r\n\r\nThank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications.\r\n\r\nTRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans.\r\n\r\nNOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,

Job Description • We are hiring immediately for a full time PATIENT SERVICE LEAD position., • Location: Texas Health Resources - 1301 Pennsylvania Avenue, Fort Worth, TX 76104. Note: online applications accepted only., • Schedule: Full time schedule; days and hours may vary. More details upon interview., • Requirement: Prior food service experience is required. Morrison Healthcare is a leading national food and nutrition services company supporting more than 1,000 hospitals and healthcare systems across 46 states, many of which are recognized as U.S. News & World Report ranked Top Hospitals and Health Systems. For over 70 years, Morrison has been serving some of the nation’s largest health systems and bringing a culinary, nutritional, and operational expertise that truly transforms the healthcare dining experience. Morrison has more than 1,600 registered dietitians, 1,200 executive chefs, and 31,000 professional food service team members. The company has been recognized as one of Modern Healthcare’s Best Places to Work since 2012. Job Summary Patient Services Leads are responsible to coordinate patient meal service and special requests and needs for the Patient Dining Program. Ensure that Patient Dining Associates are adequately trained and that units are properly staffed to provide service. They are a huge part of creating a culture of comfort and compassion in the healthcare environment, taking care of patients’ special requests and nutritional needs. Essential Duties and Responsibilities: • Oversees systems and processes to ensure that the strategic and operational objectives of the Patient Dining Program service are accomplished., • Supervise Patient Dining Associates and ensure they provide services that include helping patients make menu selections, assemble, and deliver/pick-up their meal trays., • Work with the caregivers and culinary team to determine menu alternatives for patients with food allergies and sensitivities; cultural, ethnic and religious preferences; or when a patient inquires about additional selections., • Interacts with nursing and evaluates on a daily basis patient meal selection, tray completion, tray delivery and tray retrieval process., • Is responsive to patients' needs at all times. Communicate problems or concerns with patients to appropriate personnel in a timely manner, following department procedures., • Assist dietitians, such as helping monitor patients who cannot eat food through their mouth, are on liquid diets or have a specific calorie count to manage., • Adhere to facility confidentiality and the patient’s rights policy as outlined in the facility’s Health Insurance Portability and Accountability Act (HIPAA) policies and procedures., • Complies with regulatory agency standards, including federal, state and JCAHO., • Follow Hazard Analysis Critical Control Point (HACCP) guidelines, a prevention based food safety system for meal assembly and distribution., • Comply with federal, state and local health and sanitation regulations, as well as department sanitation procedures., • Complete all daily, weekly or monthly reports as outlined in the Morrison Healthcare policies and procedures., • Conduct daily associate team meetings following Morrison’s branded GR8 Start Meeting guidelines and template., • Performs other duties as assigned. Qualifications: • Ability to communicate and read documents such as safety rules, procedure manuals, and operation and maintenance instructions., • Aptitude for effectively operating hospital’s admission, discharge and transfer (ADT) system, and other computer-based systems, which manage patient care records., • Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Morrison Healthcare is a member of Compass Group. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Morrison Healthcare maintains a drug-free workplace.

Job Description Who We Are: Quest Global delivers world-class end-to-end engineering solutions by leveraging our deep industry knowledge and digital expertise. By bringing together technologies and industries, alongside the contributions of diverse individuals and their areas of expertise, we are able to solve problems better, faster. This multi-dimensional approach enables us to solve the most critical and large-scale challenges across the aerospace & defense, automotive, energy, hi-tech, healthcare, medical devices, rail and semiconductor industries. We are looking for humble geniuses, who believe that engineering has the potential to make the impossible possible; innovators, who are not only inspired by technology and innovation, but also perpetually driven to design, develop, and test as a trusted partner for Fortune 500 customers. As a team of remarkably diverse engineers, we recognize that what we are really engineering is a brighter future for us all. If you want to contribute to meaningful work and be part of an organization that truly believes when you win, we all win, and when you fail, we all learn, then we’re eager to hear from you. The achievers and courageous challenge-crushers we seek, have the following characteristics and skills: What You will Do: As the Sr. Quality Engineer, you will be the technical lead for all facets of the Quality Engineering discipline. You will play a crucial role in driving continuous improvement initiatives, overseeing rapid problem resolution, and ensuring overall effectiveness of stringent Quality and compliance standards. • Project management of Quality Engineering responsibilities across all stages of assembly; from design-thru-delivery., • Manage Corrective Action Plans associated with SRR reduction projects, customer escapes, audit findings, and other site-impacting issues., • Provide technical guidance on quality standards, specifications, and processes., • Develop, implement, and maintain quality work instructions, inspection job guides, and control plans, • Utilize a variety of Root Cause Analysis tools to resolve complex issues and implement Level 1 Mistake Proofing Corrective/Preventive Actions., • Review and approve engineering changes, manufacturing changes, and any other changes that impact quality standards., • Collaborate with cross-functional Engineering team and program IPT to ensure Quality processes and products throughout product lifecycle., • Collect, organize, analyze, and report data from various sources and systems to support decision-making., • Identify opportunities for improvement in key defect drivers, aiming for targeted reductions in site metrics., • Initiate and manage new Corrective Actions, lead cross-functional team meetings, and conduct thorough investigations to determine appropriate Root Cause Corrective Actions (RCCA)., • Provide measurable input for new products, processes, or standards to implement business strategies., • Drive significant improvements in processes, systems, or products to enhance assembly performance., • Promote a culture of risk identification and mitigation, contributing positively to team success., • Continuously improve and maintain relevant skills, knowledge, qualifications, and certifications., • Bachelor’s degree in Science, Technology, Engineering, or Mathematics (STEM) with a minimum of 5 years of relevant experience, unless restricted by local laws/regulations., • Experience in the aerospace industry., • Advanced to expert knowledge in RCCA methodologies., • Experience in Lean Six Sigma practices., • Proficient in Excel, SAP., • Demonstrated strong problem-solving and decision-making abilities., • Highly skilled in data mining and analysis of large datasets., • Proven experience in preparing and delivering presentations to various audiences., • Background in project planning, management, and execution., • Ability to manage multiple projects simultaneously., • Commitment to drive and monitor continuous improvement., • Excellent interpersonal skills and a proactive approach to collaboration. Compensation decisions are made based on factors including experience, skills, education, and other job-related factors, in accordance with our internal pay structure. We also offer a comprehensive benefits package, including health insurance, paid time off, and retirement plan. Location: • This role is considered an on-site position located in Haltom City, Texas., • You must be able to commute to and from the location with your own transportation arrangements to meet the required working hours. Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insuranceCompany DescriptionWe are Quest Global. We’re in the business of engineering, but what we’re really building is a brighter future. It’s not just what we do, but why we do it that makes us different. We believe engineering has the unique opportunity to solve the problems of today that stand in the way of tomorrow. For 28 years, we have strived to be the most trusted partner for the world’s hardest engineering problems. As a global organization headquartered in Singapore, we live and work in 17 countries, with 56 global delivery centers, driven by 18,000+ extraordinary employees who make the impossible possible every day. Quest Global brings deep industry knowledge and digital expertise to deliver E2E global product engineering services. We bring together technologies and industries alongside the contributions of diverse individuals and their areas of expertise to solve problems better, faster. This multi-dimensional approach enables us to solve the most important and large-scale challenges across the Aerospace & Defense, AutoWe are Quest Global. We’re in the business of engineering, but what we’re really building is a brighter future. It’s not just what we do, but why we do it that makes us different. We believe engineering has the unique opportunity to solve the problems of today that stand in the way of tomorrow. For 28 years, we have strived to be the most trusted partner for the world’s hardest engineering problems. As a global organization headquartered in Singapore, we live and work in 17 countries, with 56 global delivery centers, driven by 18,000+ extraordinary employees who make the impossible possible every day. \r\n\r\nQuest Global brings deep industry knowledge and digital expertise to deliver E2E global product engineering services. We bring together technologies and industries alongside the contributions of diverse individuals and their areas of expertise to solve problems better, faster. This multi-dimensional approach enables us to solve the most important and large-scale challenges across the Aerospace & Defense, Auto

Job Description About Us: Goodside Health is dedicated to providing in-person urgent care, primary care, telemedicine, and SchoolMed services for children in K-12 schools across Texas. Our mission is to revolutionize pediatric healthcare delivery, ensuring equitable access and quality care for all children. Join us and help make a lasting impact on children's health and well-being. The Role: We are seeking sharp and innovative Seasonal Certified Medical Assistants (CMAs) and Licensed Vocational Nurses (LVNs) for our Alliance location. These roles embody our core values: Passion, Humility, Adaptability, Nurture, and Experience. Our CMAs and LVNs, whom we refer to as Utility Players, exemplify true teamwork and versatility, taking on a wide range of responsibilities to keep our clinics running efficiently. Utility Players handle both front desk duties (such as insurance verification and patient registration) and clinical tasks, including triage, radiology, curbside labs, and more. Above all, they are warm, humble, passionate about healthcare, and deliver 5-star care to our patients and their families. Key Success Factors of a Utility Player • Serves as a knowledgeable resource, eager to train and mentor new team members., • Works with a strong sense of urgency, managing multiple tasks efficiently., • Embraces daily clinic assignments with enthusiasm and a positive attitude., • Demonstrates exceptional customer service skills in all interactions., • Proactively helps others and takes initiative without prompting., • Communicates clearly and effectively with the on-duty provider. Our clinicians are supported by the Clinic Management and Clinical Operations teams, which assist with tasks such as inventory management and continuing education to ensure optimal performance. We celebrate successes through our Employee Engagement Platform, Assembly, maintain open communication with our C-Suite Executives, and stay informed through monthly Town Halls. Our People Operations team also regularly sends out surveys to gather feedback and improve the employee experience. Responsibilities (include but are not limited to): • Triage patients upon arrival., • Communicate with the provider when the patient is ready, summarizing symptoms and any abnormal vitals., • Document visits in the Electronic Medical Records (EMR) system (eMDs)., • Assist the provider with procedures and patient care, including splinting, radiology, vaccines, medication administration, phlebotomy, and more., • Administer and document medications as directed by the provider., • Prepare, clean, and maintain exam and treatment rooms., • Obtain lab samples and follow up with patients once results are available., • Provide patient education at the end of the visit and address any follow-up questions., • Position patients for radiology procedures (training provided)., • Handle front office tasks, including insurance verification, patient registration, answering phones, and processing payments. Full-time staff members are eligible to participate in our suite of benefits starting the first day of the month following 30 days of employment, including: • Competitive salary & company culture, • Medical, Dental, and Vision coverage with various tiers, • Accident, critical illness, and hospital indemnity insurance, • Company-paid basic life insurance, • Voluntary life & disability insurance (short-term and long-term), • Legal & identity theft protection, • 401(k) plan, • Professional Development Reimbursement, • Employee Assistance Program (company-paid), • Free in-clinic and telemedicine visits for employees and dependents, • Corporate Discount Program (flights, hotels, theme parks, retail, etc.), • Monday - Friday: 12:00pm – 9:00pm Requirements • Passion for working with children, • Experience in a Pediatric Office, Pediatric Hospital, or Urgent Care within the past 3 years, with a minimum duration of 6 months, • Certified Medical Assistant (CMA, RMA) or Licensed Vocational Nurse (LVN) with a Texas license, • BLS certification required (online renewal accepted by the American Heart Association), • Knowledge of HIPAA, OSHA, basic clinical procedures, CLIA-Waived Testing, and EMR software Powered by JazzHR nV4zu0F7p3

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. Scope of Position: This highly motivated individual, as part of the Utility Production team, will be responsible for assembling water heaters and/or components using hand tools and portable power tools. This position reports to the production supervisor, will be fully onsite and based in Fort Worth, Texas. Primary Job Duties and Responsibilities \n • Perform general labor tasks to support production, including insulating, cleaning, organizing, and assisting with equipment or material handling.\n, • Operate basic hand tools and power tools safely and effectively.\n, • Assist with setup, operation, and shutdown of work areas, machinery, or production lines as directed.\n, • Transport materials, supplies, and waste to designated areas.\n, • Follow all safety procedures and maintain a clean, hazard-free work environment.\n, • Perform other duties as assigned to support team and facility needs.\n, • Assume responsibility for other projects and duties as assigned by Value Stream Supervisor or Company management.\n, • Responsibility directly tied to Watts Value (Integrity, Accountability, Continuous Improvement, Transparency)\n\n Required Qualifications \n • High School diploma or equivalent experience\n, • Must have the ability to read tape measure and measuring devices, such as torque wrenches.\n, • Must have basic computer knowledge.\n, • Must be able to read, understand and follow assembly instructions.\n, • Basic knowledge of mechanical or electrical assembly, hydro testing, plumbing, setup and insulation.\n, • Ability to use hand/light power tools.\n, • Understanding of and adherence to applicable laws, codes, policies, regulations, and safety practices and procedures, as applicable.\n, • Must successfully establish employment eligibility and satisfactorily complete background checks and required pre-employment testing as a condition of employment.\n\n Preferred Qualifications • One year of experience working in a manufacturing environment\n General Applicable Company Competencies \n • Commitment to Watts' values of integrity, accountability, continuous improvement and innovation, and transparency.\n, • Punctuality and dependability.\n, • Ability to be flexible and adapt to changing work priorities and stressful conditions.\n, • Adherence to all personnel policies, procedures, and standards of process as implemented by Watts.\n, • Maintain productive and collaborative relationships with other Watts employees.\n, • Adherence to Watts' seven cultural beliefs: Growth Mindset, Customer-Focused Innovation, Constant Communication, Clear Goals, Collaborate Globally, Be Inclusive, and Take Action.\n\n Working Conditions: While performing the job duties, you will be working on-site in a manufacturing facility. You will be required to work at the Company's Fort Worth location. Your scheduled work hours will be communicated to you by your manager. Physical Requirements: Specific physical abilities required for this position include, but are not limited to: \n • Ability to stand for long periods of time.\n, • Ability to lift and carry up to 25 pounds.\n, • Ability to push and pull up to 25 pounds.\n, • Ability to physically move around manufacturing floor.\n, • Ability to read documents and communicate clearly with management and coworkers.\n, • Ability to wear personal protective equipment, which may include, but is not limited to, safety shoes, hearing protection, and safety glasses.\n\n Nothing in this job description restricts Watts' right to assign or reassign duties, responsibilities, and working hours/conditions to this position at any time. This position is "at will," which means that either the employee or Watts may terminate the employment relationship at any time, with or without notice, and for any lawful reason. #LI (Onsite) Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. \n • Competitive compensation based on your skills, qualifications and experience\n, • Comprehensive medical and dental coverage, retirement benefits\n, • Family building benefits, including paid maternity/paternity leave\n, • 10 paid holidays and Paid Time Off\n, • Continued professional development opportunities and educational reimbursement\n, • Additional perks such as fitness reimbursements and employee discount programs\n How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

For over 80 years, Oil States has been a highly respected technology and solutions pioneer manufacturing diverse products for offshore platforms, subsea pipelines, defense, and general industrial applications worldwide. Oil States recognizes that our diverse workforce is our greatest asset. We offer a competitive compensation package, including paid time off as well as health insurance eligibility on the first day of employment. Paid time off includes vacation, holiday and sick time. Benefits include medical, dental, vision, 401k, life insurance, long and short-term disability, and flexible spending accounts. When we contribute to the company's success, we all win. In our organization, the Assembler Test Tech II has a critical and challenging role in helping achieve innovation and meeting our commitments. POSITION SUMMARY: Responsible for the safe, efficient, handling, installation and assembly of large, heavy steel components in support of the manufacturing process and testing functions as well as scheduling duties. ESSENTIAL DUTIES AND RESPONSIBILITIES: \n • Safely, responsibly and efficiently lifts handles and assembles large parts, tools and equipment.\n, • Operate a variety of equipment including common manual/pneumatic hand tools, hydraulic torque wrenches, hydraulic tensioning devices, hydraulic presses, steam systems, overhead cranes, and forklift.\n, • Ensure products are shipped on time.\n, • Ensure safe working environment and clean work area.\n, • Assist with mechanical test programs and manufacturing procedures.\n, • Communicate and coordinate activities with various individuals.\n, • Travel to and perform field operations at either onshore or offshore facilities, commensurate with experience, including appropriate training to meet site requirements.\n, • Installation of various test devices.\n, • Perform other duties assigned by supervisor.\n\n QUALIFICATION REQUIREMENTS: \n • High school diploma or equivalent.\n, • A heavy equipment manufacturing and/or oilfield services background with at least 2-4 years of experience in the assembly of heavy equipment.\n, • Read, understand and follow written procedures and mechanical drawings.\n, • First hand knowledge and experience with both common hand tools, heavy lift equipment, hydraulic torque wrenches and hydraulic tensioning devices.\n, • Basic understanding of mechanical devices, manufacturing processes and their operation.\n, • Possess a broad knowledge of good safety practices and an excellent safety record.\n, • Basic mathematical skills.\n, • Good communication skills.\n, • Experience in production or manufacturing environment.\n, • Strong organization skills.\n, • Good interpersonal skills and the capacity to work constructively with others.\n, • Ability to read, understand and follow written procedures and mechanical drawings.\n\n PHYSICAL REQUIREMENTS \n • Able to work physically demanding 8 to 12 hour shifts.\n, • Capable of considerable bending, standing and lifting for extended periods.\n, • Capable of working outside in all weather conditions.\n, • Lifting up to 50 pounds frequently and 75-100 pounds occasionally with assistance.\n\n CITIZENSHIP REQUIREMENTS - By contractual requirements, the project and job location for this position requires that all persons establish proof of US Citizenship. Dual Citizenship (US citizenship and citizenship of some other country) cannot be accepted. You will be required to provide original or certified copies of documents establishing your citizenship prior to consideration for this position. Be part of what's next at Oil States ! Over 80 years in business An Equal Opportunity Employer An E-Verify Employer Un empleador de E-Verify Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

For over 80 years, Oil States has been a highly respected technology and solutions pioneer manufacturing diverse products for offshore platforms, subsea pipelines, defense, and general industrial applications worldwide. Oil States recognizes that our diverse workforce is our greatest asset. We offer a competitive compensation package, including paid time off as well as health insurance eligibility on the first day of employment. Paid time off includes vacation, holiday and sick time. Benefits include medical, dental, vision, 401k, life insurance, long and short-term disability, and flexible spending accounts. When we contribute to the company's success, we all win. In our organization, the Assembly Test Tech I has a critical and challenging role in helping achieve innovation and meeting our commitments. POSITION SUMMARY: This position will be assisting in the safe, efficient, handling, installation and assembly of large, heavy steel components in support of the manufacturing process and testing functions assigned to Manufacturing Engineering in the Arlington, Texas facility. In addition, this position will require working and cross-training in several production departments as needed. ESSENTIAL DUTIES AND RESPONSIBILITIES: \n • Safely, responsibly, and efficiently assist in the assembly of large parts, tools, and equipment.\n, • Operate a variety of equipment including common manual/pneumatic hand tools, hydraulic torque wrenches, hydraulic tensioning devices, hydraulic presses, steam systems, overhead cranes, and forklift.\n, • Readily accept verbal and written instructions from supervisor and experienced co-workers assigned supervisory responsibilities.\n, • Assist with mechanical test programs and manufacturing procedures.\n, • Assist other departments as needed with production, machine operation, and molding tasks.\n, • Ensure safe working environment and clean work area.\n, • Perform other duties assigned by supervisor.\n\n QUALIFICATION REQUIREMENTS: \n • High school or equivalent.\n, • First hand knowledge and experience with common hand tools.\n, • Possess good safety practices and an excellent safety record.\n, • Ability to work constructively with others.\n, • Ability to read, understand and follow written and verbal instructions.\n, • Must function with minimal supervision.\n, • Ability to actively increase responsibilities and improve work processes.\n\n PHYSICAL REQUIREMENTS \n • Capable of considerable climbing, bending, standing and lifting for extended periods.\n, • Lifting up to 50 pounds frequently and 75-100 pounds occasionally with assistance.\n, • Capable of working outside in all weather conditions.\n\n CITIZENSHIP REQUIREMENTS - By contractual requirements this position requires that all persons establish proof of US Citizenship. Dual Citizenship (US citizenship and citizenship of some other country) cannot be accepted. You will be required to provide original or certified copies of documents establishing your citizenship prior to consideration for this position. Be part of what's next at Oil States! Over 80 years in business An Equal Opportunity Employer An E-Verify Employer Un empleador de E-Verify Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

For over 80 years, Oil States has been a highly respected technology and solutions pioneer manufacturing diverse products for offshore platforms, subsea pipelines, defense, and general industrial applications worldwide. Oil States recognizes that our diverse workforce is our greatest asset. We offer a competitive compensation package, including paid time off as well as health insurance eligibility on the first day of employment. Paid time off includes vacation, holiday and sick time. Benefits include medical, dental, vision, 401k, life insurance, long and short-term disability, and flexible spending accounts. When we contribute to the company's success, we all win. In our organization, the Manufacturing Assembly Test Tech has a critical and challenging role in helping achieve innovation and meeting our commitments. POSITION SUMMARY: Under direct supervision, set up and test production parts as well as Research & Development (R&D) parts for the Aerospace group. Build test fixtures, record data, and review test procedures. ESSENTIAL DUTIES AND RESPONSIBILITIES: \n • Perform mechanical assembly of components\n, • Testing of production parts as required by MIP's.\n, • Testing of R&D parts as required.\n, • Build & setup of test equipment.\n, • Calibrate test gauges and pressure transducers as required to perform production testing\n, • Generate and maintain various reports concerning production and testing.\n, • Understand and assist in equipment setup and production support.\n, • Ensure current testing procedures are being used.\n, • Coordinate with quality department witness hold points for production testing\n, • Assist on production floor when required (load/unload molds, load/unload trucks, etc.)\n, • Perform other duties assigned by supervisor.\n\n QUALIFICATION REQUIREMENTS: \n • At least 2 years of related college coursework; or high school diploma or equivalent with a minimum of 1 year of related testing experience, preferably in the rubber industry or related field.\n, • Computer proficient (Email, Microsoft Office, etc.).\n, • Good verbal and written communication skills.\n, • Proficiency in mathematics.\n, • Read tape measure, calipers, Pi tape, and dial indicators.\n, • Use cutting equipment and hand tools.\n\n PHYSICAL REQUIREMENTS: \n • Prolonged periods of standing and/or sitting.\n, • Moderate walking, reaching, bending pushing & pulling.\n, • Moderate to heavy lifting up to 50lbs without assistance. Over 50lbs with assistance.\n, • Exposure to chemicals.\n, • Work in the heat in the summer and cold in the winter.\n\n CITIZENSHIP REQUIREMENTS - By contractual requirements this position requires that all persons establish proof of US Citizenship. Dual Citizenship (US citizenship and citizenship of some other country) cannot be accepted. You will be required to provide original or certified copies of documents establishing your citizenship prior to consideration for this position. Be part of what's next at Oil States! Over 80 years in business An Equal Opportunity Employer An E-Verify Employer Un empleador de E-Verify Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

For over 80 years, Oil States has been a highly respected technology and solutions pioneer manufacturing diverse products for offshore platforms, subsea pipelines, defense, and general industrial applications worldwide. Oil States recognizes that our diverse workforce is our greatest asset. We offer a competitive compensation package, including paid time off as well as health insurance eligibility on the first day of employment. Paid time off includes vacation, holiday and sick time. Benefits include medical, dental, vision, 401k, life insurance, long and short-term disability, and flexible spending accounts. When we contribute to the company's success, we all win. In our organization, the Assembler Test Tech II has a critical and challenging role in helping achieve innovation and meeting our commitments. POSITION SUMMARY: Responsible for the safe, efficient, handling, installation and assembly of large, heavy steel components in support of the manufacturing process and testing functions as well as scheduling duties. ESSENTIAL DUTIES AND RESPONSIBILITIES: \n • Safely, responsibly and efficiently lifts handles and assembles large parts, tools and equipment.\n, • Operate a variety of equipment including common manual/pneumatic hand tools, hydraulic torque wrenches, hydraulic tensioning devices, hydraulic presses, steam systems, overhead cranes, and forklift.\n, • Ensure products are shipped on time.\n, • Ensure safe working environment and clean work area.\n, • Assist with mechanical test programs and manufacturing procedures.\n, • Communicate and coordinate activities with various individuals.\n, • Travel to and perform field operations at either onshore or offshore facilities, commensurate with experience, including appropriate training to meet site requirements.\n, • Installation of various test devices.\n, • Perform other duties assigned by supervisor.\n\n QUALIFICATION REQUIREMENTS: \n • High school diploma or equivalent.\n, • A heavy equipment manufacturing and/or oilfield services background with at least 2-4 years of experience in the assembly of heavy equipment.\n, • Read, understand and follow written procedures and mechanical drawings.\n, • First hand knowledge and experience with both common hand tools, heavy lift equipment, hydraulic torque wrenches and hydraulic tensioning devices.\n, • Basic understanding of mechanical devices, manufacturing processes and their operation.\n, • Possess a broad knowledge of good safety practices and an excellent safety record.\n, • Basic mathematical skills.\n, • Good communication skills.\n, • Experience in production or manufacturing environment.\n, • Strong organization skills.\n, • Good interpersonal skills and the capacity to work constructively with others.\n, • Ability to read, understand and follow written procedures and mechanical drawings.\n\n PHYSICAL REQUIREMENTS \n • Able to work physically demanding 8 to 12 hour shifts.\n, • Capable of considerable bending, standing and lifting for extended periods.\n, • Capable of working outside in all weather conditions.\n, • Lifting up to 50 pounds frequently and 75-100 pounds occasionally with assistance.\n\n CITIZENSHIP REQUIREMENTS - By contractual requirements, the project and job location for this position requires that all persons establish proof of US Citizenship. Dual Citizenship (US citizenship and citizenship of some other country) cannot be accepted. You will be required to provide original or certified copies of documents establishing your citizenship prior to consideration for this position. Be part of what's next at Oil States ! Over 80 years in business An Equal Opportunity Employer An E-Verify Employer Un empleador de E-Verify Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description We are seeking a detail-oriented and organized sheet metal helper to join our team. This position involves using hand tools to snip sheet metal, assisting sheet metal fabrication operation of specialized equipment, building custom pallets to ship product, assembly of product, and marking & staging of fabricated items. The ideal candidate will have strong attention to detail, excellent organizational skills, and the ability to work efficiently in a fast-paced environment. Key Responsibilities: Properly wear the required PPE for designated task Safely operate power hand tools and stationary equipment such as angle grinders, miter saws, impact drill, etc.. Ability to understand fabrication documents follow their instruction Ensure all items are correctly identified, labeled, and staged for the appropriate departments. Collaborate with team members to ensure smooth flow of fabricated products to support production needs. Inspect materials for quality and report any defects or issues. Keep work area clean and organized to ensure safety and efficiency. Perform other related duties as assigned. Qualifications: Strong attention to detail and accuracy. Ability to lift and carry heavy items up to 50lbs Must be proficient in reading a tape measure to the nearest 1/16th of an inch Being able to stand for long periods of time Strong organizational and time management skills. Ability to work independently and as part of a team. Proficient in basic computer applications and operation Education & Experience: High school diploma or equivalent. Previous experience in a warehouse, manufacturing, or fabrication role is preferred. Work Hours & Benefits: Monday-Friday, 7am-3:30pm(30min unpaid lunch) with potential for overtime Complete insurance coverage including medical, dental, vision, and more 401(k) with employer match (7) paid holidays Multiple company-wide and departmental specific events yearly Accrued PTO with the ability to earn 2 weeks paid time off in the first 12 months, with an additional week accrued in 24 months.

Are you ready to bring your Supervisory/Manufacturing skills to a team that values precision and innovation? At Martin Sprocket & Gear, we're dedicated to producing quality mechanical power transmission components, material handling systems, and custom forgings with excellence, and we're looking for skilled CNC Programming Supervisor like you! What You'll Do: \n • \nDepartment Oversight: Manage day-to-day operations of the department, ensuring efficient workflow, adherence to safety protocols, and compliance with time-keeping and performance management procedures.\n, • \nEmployee Management: Oversee employee performance, provide coaching and feedback, and conduct performance evaluations to support team development and productivity.\n, • \nTraining & Development: Assist with onboarding and training of new employees, as well as provide ongoing education and skill development for the team.\n, • \nOrder Management: Expedite and prioritize shop orders through the department to meet production schedules and customer requirements.\n, • \nCross-Department Coordination: Collaborate with management and other departments to ensure smooth manufacturing, fabrication, and assembly processes.\n, • \nWorkplace Safety & Maintenance: Ensure the team maintains machines and work areas in a clean, safe, and organized manner, addressing safety concerns promptly.\n, • \nProcess Improvement: Identify and implement opportunities for operational efficiencies and continuous improvement in manufacturing processes.\n, • \nProblem-Solving: Address and resolve production or personnel issues promptly to avoid disruptions to operations.\n, • \nCompliance: Ensure adherence to company policies, quality standards, and industry regulations.\n\n What You'll Bring: \n • \n Experience: Have previous supervisory/management experience (5 years minimum)\n, • \nLeadership Skills: Demonstrated ability to motivate, guide, and develop team members to achieve individual and collective goals.\n, • \nShop Floor Presence: Ability to maintain a consistent and active presence on the shop floor, spending approximately 2/3 of the shift overseeing operations.\n, • \nCommunication Skills: Exceptional verbal and written communication skills, with the ability to engage professionally with shop employees, office staff, supervisors, managers, and executives.\n, • \nAdaptability: Able to adjust to changing priorities and unexpected challenges while maintaining productivity and focus.\n, • \nTeam Collaboration: Excellent team player with the ability to work well with others and foster a collaborative and cooperative work environment.\n, • \nSafety Leadership: Strong commitment to workplace safety, with a demonstrated ability to promote and enforce safety standards and practices.\n, • \nPerformance Management: Proficiency in performance management processes, including creating plans of action and conducting employee evaluations.\n, • \nDetail Orientation: Highly detail-oriented, ensuring quality and precision in all tasks and responsibilities.\n, • \nTechnical Proficiency: Proficient in Microsoft Office Suite (Word, Excel, Outlook) and other relevant software.\n, • \nMulti-Tasking: Strong ability to prioritize and manage multiple tasks effectively throughout the shift.\n, • \nMath Skills: Average math skills, with the ability to read and comprehend written instructions in English and complete logs, documents, and reports accurately.\n\n Your Schedule: • 1st Shift, Monday - Friday, 7:00 AM - 3:00 PM\n To perform this job successfully, you must be able to report daily to the branch to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified candidates with disabilities to perform the essential functions. Why Martin Sprocket & Gear, Inc.? Founded in 1951 by Joe Martin Sr., Martin Sprocket & Gear is a global leader in mechanical power transmission components, material handling systems, and custom forgings. We are proud to remain family-owned and operate on a simple philosophy: "Make a quality product, have plenty of it available, and be easy to do business with!" With dedicated employees, regional facilities, and strong distributor partnerships, Martin offers stability, growth potential, and a dynamic work environment for all team members. Why You Will Love Working Here: At Martin, our people are our greatest asset. We foster an inclusive, collaborative environment where innovation and growth thrive, and your contributions are valued as part of a team dedicated to excellence. Here is what you'll enjoy when you join our team: \n • \nComprehensive Health Benefits: Affordable Medical, Pharmacy, and Dental plans.\n, • \nWellness Initiatives: Employee wellness programs for a healthy work-life balance.\n, • \nFinancial Security: Life and Disability Insurance, plus a robust 401(k) Profit Trust Plan.\n, • \nWork-Life Balance: Paid Time Off (PTO) and company-paid holidays.\n, • \nGrowth Opportunities: Career development and advancement within a thriving company.\n\n Ready to Join Us? Apply today and become part of Martin Sprocket & Gear's legacy of quality and excellence! Disclaimers We do not accept applications from former or current Authorized Martin Distributors. The above statements describe the general nature and level of work being performed by candidates applying for this specific role. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of candidates hired. Martin Sprocket & Gear is an EEO Employer and an E-Verify participating employer. We do not discriminate based on race, religion, national origin, sex, sexual orientation, gender identity, age, physical or mental disability, marital status, or veteran status. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. Scope of Position: This highly motivated individual, as part of the Assembler team, will be responsible for assembling water heaters and/or components using hand tools and portable power tools. This position reports to the Manufacturing supervisor, will be fully onsite and based in Fort Worth, Texas. Primary Job Duties and Responsibilities \n • Assemble and test commercial water heaters and burners using hand/light power tools, tape measure and measuring devices, such as torque wrenches.\n, • Troubleshoot any abnormalities that may occur during manufacturing or assembly.\n, • Read, understand and follow assembly instructions.\n, • Utilize gas analyzer equipment for testing\n, • Adapt to any new requirements or processes.\n, • Inspect parts and finished products for quality, reporting defects or inconsistencies.\n, • Maintain accurate production records and follow standard operating procedures.\n, • Perform day-to-day functions: assembling, 5S Housecleaning, participation in any and all required safety training, power tools and hand tools usage training.\n, • Assist other team members when needed, remain flexible and able to perform other duties as needed.\n, • Assume responsibility for other projects and duties as assigned by Value Stream Supervisor or Company management.\n, • Responsibility directly tied to Watts Value (Integrity, Accountability, Continuous Improvement, Transparency)\n\n Required Qualifications \n • 2 years of experience working in a manufacturing environment\n, • High School Diploma or equivalent experience\n, • Read, write, speak and understand English fluently.\n, • Basic mathematical skills.\n, • Basic Computer skills.\n, • Basic knowledge of mechanical or electrical assembly, electrical wiring, hydro testing, plumbing, setup, insulation and fabrication skills.\n, • Ability to read and understand schematics for wiring and plumbing instructions, Bill of Materials (BOM), and engineering drawings as needed to build/assemble products.\n, • All other duties as required.\n, • Understanding of and adherence to applicable laws, codes, policies, regulations, and safety practices and procedures, as applicable.\n, • Must successfully establish employment eligibility and satisfactorily complete background checks and required pre-employment testing as a condition of employment.\n\n General Applicable Company Competencies \n • Commitment to Watts' values of integrity, accountability, continuous improvement and innovation, and transparency.\n, • Punctuality and dependability.\n, • Ability to be flexible and adapt to changing work priorities and stressful conditions.\n, • Adherence to all personnel policies, procedures, and standards of process as implemented by Watts.\n, • Maintain productive and collaborative relationships with other Watts employees.\n, • Adherence to Watts' seven cultural beliefs: Growth Mindset, Customer-Focused Innovation, Constant Communication, Clear Goals, Collaborate Globally, Be Inclusive, and Take Action.\n\n Working Conditions: While performing the job duties, you will be working on-site in a manufacturing facility. You will be required to work at the Company's Fort Worth location. Your scheduled work hours will be communicated to you by your manager. Physical Requirements: Specific physical abilities required for this position include, but are not limited to: \n • Ability to stand for long periods of time.\n, • Ability to lift and carry up to 25 pounds.\n, • Ability to push and pull up to 25 pounds.\n, • Ability to physically move around manufacturing floor.\n, • Ability to read documents and communicate clearly with management and coworkers.\n, • Ability to wear personal protective equipment, which may include, but is not limited to, safety shoes, hearing protection, and safety glasses.\n\n Nothing in this job description restricts Watts' right to assign or reassign duties, responsibilities, and working hours/conditions to this position at any time. This position is "at will," which means that either the employee or Watts may terminate the employment relationship at any time, with or without notice, and for any lawful reason. #LI (Onsite) Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. \n • Competitive compensation based on your skills, qualifications and experience\n, • Comprehensive medical and dental coverage, retirement benefits\n, • Family building benefits, including paid maternity/paternity leave\n, • 10 paid holidays and Paid Time Off\n, • Continued professional development opportunities and educational reimbursement\n, • Additional perks such as fitness reimbursements and employee discount programs\n How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

Job Description About Us: Goodside Health is dedicated to providing in-person urgent care, primary care, telemedicine, and SchoolMed services for children in K-12 schools across Texas. Our mission is to revolutionize pediatric healthcare delivery, ensuring equitable access and quality care for all children. Join us and help make a lasting impact on children's health and well-being. The Role: We are seeking sharp and innovative Certified Medical Assistants (CMAs) for our Mansfield office. These roles embody our core values: Passion, Humility, Adaptability, Nurture, and Experience. Our CMAs, whom we refer to as Utility Players, exemplify true teamwork and versatility, taking on a wide range of responsibilities to keep our clinics running efficiently. Utility Players handle both front desk duties (such as insurance verification and patient registration) and clinical tasks, including triage, radiology, curbside labs, and more. Above all, they are warm, humble, passionate about healthcare, and deliver 5-star care to our patients and their families. Key Success Factors of a Utility Player • Serves as a knowledgeable resource, eager to train and mentor new team members., • Works with a strong sense of urgency, managing multiple tasks efficiently., • Embraces daily clinic assignments with enthusiasm and a positive attitude., • Demonstrates exceptional customer service skills in all interactions., • Proactively helps others and takes initiative without prompting., • Communicates clearly and effectively with the on-duty provider. Our clinicians are supported by the Clinic Management and Clinical Operations teams, which assist with tasks such as inventory management and continuing education to ensure optimal performance. We celebrate successes through our Employee Engagement Platform, Assembly, maintain open communication with our C-Suite Executives, and stay informed through monthly Town Halls. Our People Operations team also regularly sends out surveys to gather feedback and improve the employee experience. Responsibilities (include but are not limited to): • Triage patients upon arrival., • Communicate with the provider when the patient is ready, summarizing symptoms and any abnormal vitals., • Document visits in the Electronic Medical Records (EMR) system (eMDs)., • Assist the provider with procedures and patient care, including splinting, radiology, vaccines, medication administration, phlebotomy, and more., • Administer and document medications as directed by the provider., • Prepare, clean, and maintain exam and treatment rooms., • Obtain lab samples and follow up with patients once results are available., • Provide patient education at the end of the visit and address any follow-up questions., • Position patients for radiology procedures (training provided)., • Handle front office tasks, including insurance verification, patient registration, answering phones, and processing payments. Full-time staff members are eligible to participate in our suite of benefits starting the first day of the month following 30 days of employment, including: • Competitive salary & company culture, • Medical, Dental, and Vision coverage with various tiers, • Accident, critical illness, and hospital indemnity insurance, • Company-paid basic life insurance, • Voluntary life & disability insurance (short-term and long-term), • Legal & identity theft protection, • 401(k) plan, • Professional Development Reimbursement, • Employee Assistance Program (company-paid), • Free in-clinic and telemedicine visits for employees and dependents, • Corporate Discount Program (flights, hotels, theme parks, retail, etc.), • Monday - Friday: 12:00pm – 9:00pm Requirements • Passion for working with children, • Experience in a Pediatric Office, Pediatric Hospital, or Urgent Care within the past 3 years, with a minimum duration of 6 months, • Certified Medical Assistant (CMA, RMA), • BLS certification required (online renewal accepted by the American Heart Association), • Knowledge of HIPAA, OSHA, basic clinical procedures, CLIA-Waived Testing, and EMR software Powered by JazzHR BHn9dIQRl6

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. Scope of Position: This highly motivated individual, as part of the Assembler team, will be responsible for assembling water heaters and/or components using hand tools and portable power tools. This position reports to the Manufacturing supervisor, will be fully onsite and based in Fort Worth, Texas. Primary Job Duties and Responsibilities \n • Assemble and test commercial water heaters and burners using hand/light power tools, tape measure and measuring devices, such as torque wrenches.\n, • Troubleshoot any abnormalities that may occur during manufacturing or assembly.\n, • Read, understand and follow assembly instructions.\n, • Utilize gas analyzer equipment for testing\n, • Adapt to any new requirements or processes.\n, • Inspect parts and finished products for quality, reporting defects or inconsistencies.\n, • Maintain accurate production records and follow standard operating procedures.\n, • Perform day-to-day functions: assembling, 5S Housecleaning, participation in any and all required safety training, power tools and hand tools usage training.\n, • Assist other team members when needed, remain flexible and able to perform other duties as needed.\n, • Assume responsibility for other projects and duties as assigned by Value Stream Supervisor or Company management.\n, • Responsibility directly tied to Watts Value (Integrity, Accountability, Continuous Improvement, Transparency)\n\n Required Qualifications \n • 2 years of experience working in a manufacturing environment\n, • High School Diploma or equivalent experience\n, • Read, write, speak and understand English fluently.\n, • Basic mathematical skills.\n, • Basic Computer skills.\n, • Basic knowledge of mechanical or electrical assembly, electrical wiring, hydro testing, plumbing, setup, insulation and fabrication skills.\n, • Ability to read and understand schematics for wiring and plumbing instructions, Bill of Materials (BOM), and engineering drawings as needed to build/assemble products.\n, • All other duties as required.\n, • Understanding of and adherence to applicable laws, codes, policies, regulations, and safety practices and procedures, as applicable.\n, • Must successfully establish employment eligibility and satisfactorily complete background checks and required pre-employment testing as a condition of employment.\n\n General Applicable Company Competencies \n • Commitment to Watts' values of integrity, accountability, continuous improvement and innovation, and transparency.\n, • Punctuality and dependability.\n, • Ability to be flexible and adapt to changing work priorities and stressful conditions.\n, • Adherence to all personnel policies, procedures, and standards of process as implemented by Watts.\n, • Maintain productive and collaborative relationships with other Watts employees.\n, • Adherence to Watts' seven cultural beliefs: Growth Mindset, Customer-Focused Innovation, Constant Communication, Clear Goals, Collaborate Globally, Be Inclusive, and Take Action.\n\n Working Conditions: While performing the job duties, you will be working on-site in a manufacturing facility. You will be required to work at the Company's Fort Worth location. Your scheduled work hours will be communicated to you by your manager. Physical Requirements: Specific physical abilities required for this position include, but are not limited to: \n • Ability to stand for long periods of time.\n, • Ability to lift and carry up to 25 pounds.\n, • Ability to push and pull up to 25 pounds.\n, • Ability to physically move around manufacturing floor.\n, • Ability to read documents and communicate clearly with management and coworkers.\n, • Ability to wear personal protective equipment, which may include, but is not limited to, safety shoes, hearing protection, and safety glasses.\n\n Nothing in this job description restricts Watts' right to assign or reassign duties, responsibilities, and working hours/conditions to this position at any time. This position is "at will," which means that either the employee or Watts may terminate the employment relationship at any time, with or without notice, and for any lawful reason. #LI (Onsite) Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. \n • Competitive compensation based on your skills, qualifications and experience\n, • Comprehensive medical and dental coverage, retirement benefits\n, • Family building benefits, including paid maternity/paternity leave\n, • 10 paid holidays and Paid Time Off\n, • Continued professional development opportunities and educational reimbursement\n, • Additional perks such as fitness reimbursements and employee discount programs\n How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. Scope of Position: This highly motivated individual, as part of the Assembler team, will be responsible for assembling water heaters and/or components using hand tools and portable power tools. This position reports to the Manufacturing supervisor, will be fully onsite and based in Fort Worth, Texas. Primary Job Duties and Responsibilities \n • Assemble and test commercial water heaters and burners using hand/light power tools, tape measure and measuring devices, such as torque wrenches.\n, • Troubleshoot any abnormalities that may occur during manufacturing or assembly.\n, • Read, understand and follow assembly instructions.\n, • Utilize gas analyzer equipment for testing\n, • Adapt to any new requirements or processes.\n, • Inspect parts and finished products for quality, reporting defects or inconsistencies.\n, • Maintain accurate production records and follow standard operating procedures.\n, • Perform day-to-day functions: assembling, 5S Housecleaning, participation in any and all required safety training, power tools and hand tools usage training.\n, • Assist other team members when needed, remain flexible and able to perform other duties as needed.\n, • Assume responsibility for other projects and duties as assigned by Value Stream Supervisor or Company management.\n, • Responsibility directly tied to Watts Value (Integrity, Accountability, Continuous Improvement, Transparency)\n\n Required Qualifications \n • 2 years of experience working in a manufacturing environment\n, • High School Diploma or equivalent experience\n, • Read, write, speak and understand English fluently.\n, • Basic mathematical skills.\n, • Basic Computer skills.\n, • Basic knowledge of mechanical or electrical assembly, electrical wiring, hydro testing, plumbing, setup, insulation and fabrication skills.\n, • Ability to read and understand schematics for wiring and plumbing instructions, Bill of Materials (BOM), and engineering drawings as needed to build/assemble products.\n, • All other duties as required.\n, • Understanding of and adherence to applicable laws, codes, policies, regulations, and safety practices and procedures, as applicable.\n, • Must successfully establish employment eligibility and satisfactorily complete background checks and required pre-employment testing as a condition of employment.\n\n General Applicable Company Competencies \n • Commitment to Watts' values of integrity, accountability, continuous improvement and innovation, and transparency.\n, • Punctuality and dependability.\n, • Ability to be flexible and adapt to changing work priorities and stressful conditions.\n, • Adherence to all personnel policies, procedures, and standards of process as implemented by Watts.\n, • Maintain productive and collaborative relationships with other Watts employees.\n, • Adherence to Watts' seven cultural beliefs: Growth Mindset, Customer-Focused Innovation, Constant Communication, Clear Goals, Collaborate Globally, Be Inclusive, and Take Action.\n\n Working Conditions: While performing the job duties, you will be working on-site in a manufacturing facility. You will be required to work at the Company's Fort Worth location. Your scheduled work hours will be communicated to you by your manager. Physical Requirements: Specific physical abilities required for this position include, but are not limited to: \n • Ability to stand for long periods of time.\n, • Ability to lift and carry up to 25 pounds.\n, • Ability to push and pull up to 25 pounds.\n, • Ability to physically move around manufacturing floor.\n, • Ability to read documents and communicate clearly with management and coworkers.\n, • Ability to wear personal protective equipment, which may include, but is not limited to, safety shoes, hearing protection, and safety glasses.\n\n Nothing in this job description restricts Watts' right to assign or reassign duties, responsibilities, and working hours/conditions to this position at any time. This position is "at will," which means that either the employee or Watts may terminate the employment relationship at any time, with or without notice, and for any lawful reason. #LI (Onsite) Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. \n • Competitive compensation based on your skills, qualifications and experience\n, • Comprehensive medical and dental coverage, retirement benefits\n, • Family building benefits, including paid maternity/paternity leave\n, • 10 paid holidays and Paid Time Off\n, • Continued professional development opportunities and educational reimbursement\n, • Additional perks such as fitness reimbursements and employee discount programs\n How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

For over 80 years, Oil States has been a highly respected technology and solutions pioneer manufacturing diverse products for offshore platforms, subsea pipelines, defense, and general industrial applications worldwide. Oil States recognizes that our diverse workforce is our greatest asset. We offer a competitive compensation package, including paid time off as well as health insurance eligibility on the first day of employment. Paid time off includes vacation, holiday and sick time. Benefits include medical, dental, vision, 401k, life insurance, long and short-term disability, and flexible spending accounts. When we contribute to the company's success, we all win. In our organization, the Assembly Test Tech I has a critical and challenging role in helping achieve innovation and meeting our commitments. POSITION SUMMARY: This position will be assisting in the safe, efficient, handling, installation and assembly of large, heavy steel components in support of the manufacturing process and testing functions assigned to Manufacturing Engineering in the Arlington, Texas facility. In addition, this position will require working and cross-training in several production departments as needed. ESSENTIAL DUTIES AND RESPONSIBILITIES: \n • Safely, responsibly, and efficiently assist in the assembly of large parts, tools, and equipment.\n, • Operate a variety of equipment including common manual/pneumatic hand tools, hydraulic torque wrenches, hydraulic tensioning devices, hydraulic presses, steam systems, overhead cranes, and forklift.\n, • Readily accept verbal and written instructions from supervisor and experienced co-workers assigned supervisory responsibilities.\n, • Assist with mechanical test programs and manufacturing procedures.\n, • Assist other departments as needed with production, machine operation, and molding tasks.\n, • Ensure safe working environment and clean work area.\n, • High school or equivalent.\n, • First hand knowledge and experience with common hand tools.\n, • Possess good safety practices and an excellent safety record.\n, • Ability to work constructively with others.\n, • Ability to read, understand and follow written and verbal instructions.\n, • Must be creative and able to learn new skills quickly.\n\n\n, • Must function with minimal supervision.\n, • Capable of considerable climbing, bending, standing and lifting for extended periods.\n, • Lifting up to 50 pounds frequently and 75-100 pounds occasionally with assistance.\n By contractual requirements this position requires that all persons establish proof of US Citizenship. Dual Citizenship (US citizenship and citizenship of some other country) cannot be accepted. You will be required to provide original or certified copies of documents establishing your citizenship prior to consideration for this position. Be part of what's next at Oil States! Over 80 years in business An Equal Opportunity Employer An E-Verify Employer Un empleador de E-Verify

Job Summary: The Shop Technician is responsible for production (disassembly, assembly/repair), quality, and EHS. Initially, the main focus will support the wind gear drive business from an aftermarket perspective. Later, the scope will evolve to include new and aftermarket industrial businesses. The Operations Department plays an integral role in the organization by supporting all facets of the business. Responsibilities and Duties: Reports to the Production supervisor of the organization. Adherence to safety requirements, such as PPE, chemical safety (MSDS), crane, forklift, and workstation inspections. Adherence to internal systems related to Quality, ISO, and Environmental, Health, and Safety (EHS) to ensure an efficient, competent, and effective operation. Comprehension of Imperial and Metric tolerances. Comprehension of internal drawings, bills of material, and procedural documentation. Disassembly, cleaning, and inspection of gear drives per Repair Procedure Document Guidelines. Perform visual inspection: Record abnormal wear; Measure and record respective bores and journals; and Arrange and identify components (gearing) that passed visual inspection to receive further processing such as nondestructive testing and grinding. Recycle unusable items such as bearings, damaged gearing, and auxiliary items. Assembly and inspection of gear drive per Repair Procedure Document Guidelines Disassembly, cleaning, and inspection of main shafts per Main Shaft Repair Procedure Document Guidelines. Assembly and inspection of main shafts per Main Shaft Repair Procedure Document Guidelines. Adherence to production schedule and completion of tasks in a timely manner. Forklift Certified/Experience operating overhead cranes Maintain and clean equipment, tools (shared and individual), and workstations. Adherence to 5S requirements. Attending scheduled meetings such as daily production and weekly safety, when requested. Minimum Qualifications: The candidate should have a strong mechanical background. Gearing-related experience is a plus. Must have a positive attitude and excellent communication skills (oral and written). Must understand how to read metric drawings and tolerances. Proficiency with Microsoft® Office and other internal programs. Fluent in Mandarin or Spanish is a plus. Education: High school degree and/or comparable experience in the industry. Compensation and Benefits: Pay Rate: $19-$22 Medical/Dental/Vision/Life Insurance 401k Retirement Plan Paid Time Off Paid company holiday Educational Assistance Program Work Conditions and Physical Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. The employee must have the ability to sit for extended periods of time; exhibit manual dexterity to dial a telephone, to enter data into a computer; to see and read a computer screen and printed material with or without vision aids; hear and understand speech at normal levels and on the telephone; speak in audible tones so that others may understand clearly in person and on the telephone; ability to understand and follow oral and written instructions; the physical agility to lift up to 75 pounds(Group Lifting). The above statements describe the general nature and level of work being performed. This job description does not serve as a contract, nor does it limit the employer's ability to establish or change the content, nature, or essential functions of this job. Employees holding this position will be required to perform any other job-related duties as requested by management. Under the Americans with Disabilities Act (ADA) of 1990, reasonable accommodations will be considered for qualified individuals with a disability. Ref: #103-Eng Dallas

Job DescriptionMaterial HandlerForth Worth, TX (Warehouse/Distribution Setting)1st & 2nd Shift Openings We’re hiring Material Handlers to join a busy warehouse team. In this role, you’ll support daily operations by receiving, organizing, and distributing materials that keep production running. You’ll also prepare goods for shipment, maintain accurate records, and contribute to a safe, team-oriented environment. About the company As a leading medical technology company, this organization is dedicated to developing innovative orthopedic solutions that improve patient outcomes and streamline healthcare workflows. Headquartered in Wilmington, Delaware and listed on the NYSE, the company offers a broad portfolio of products—including advanced bracing and support systems—that fuel active lifestyles and empower clinicians to deliver quality care. Driven by continuous improvement, collaboration, and innovation, the organization is committed to “creating better together.” Responsibilities • Assemble orthopedic products using tools and written instructions, • Prepare materials by sanding, cutting, and mixing paint, • Inspect products for quality and accuracy, • Package and prepare goods for shipment, • Lift/move up to 50–60 lbs and stand for full shifts, • Maintain a safe, clean, and organized work area Qualifications • High School Diploma or GED required., • 0–1 year of assembly, manufacturing, or warehouse experience (training provided)., • Ability to follow written instructions and meet production standards., • Strong communication and teamwork skills., • Basic computer knowledge (Excel, Outlook, Word)., • Reliable and safety-conscious with attention to detail. What’s in it for You? • Competitive pay + shift differentials, • Weekly pay with steady full-time hours, • Training and advancement opportunities, • Be part of a team that directly impacts patient care, • A safety-focused environment with supportive leadership, • Opportunity to work with innovative medical technology Ready to build products that help people move better and live healthier lives? Apply today to join the team as a Product Assembler! Contact Thavi Louanlavong today for more details. If you or someone you know is interested in learning more, please contact: Phone: 817-857-7711 Email: #AssemblerJobs, #ManufacturingCareers, #MedicalTechnology, #NowHiring, #WarehouseJobs, #ProductAssembly, #2ndShiftJobs, #1stShiftJobs, #Teamwork, #FullTimeJobs, #MedicalDevices, #Orthopedics

Job DescriptionAmerican Repair Maintenance Field Service Technician Fort Worth, TX Who We Are: American Repair Maintenance (ARM) began over 30 years ago as a small two-person operation to service several premier video stores. Since that time, we have evolved into a data-driven, full-service repair, and preventative maintenance partner across all trades serving over 20,000 locations in the US of some of the finest retail brands. We are more than just a repair and maintenance company. We are a strategic partner for our clients as we continue to innovate and grow our organization. We work hard to put our customers' needs first, support our team members with a dynamic culture, provide great benefits, and create technology-enabled work processes that make their jobs easier. We know that our strong commitment to people is what sets us apart along with our strong core values that guide our day-to-day operations. These core values ensure we are moving in the right direction. They are: • Collaborate, • Do Whatever it Takes, • Reliable, • Authentic, • Do the Right Thing, • Innovate and be Open to Learn, • Choose to BE an Owner Who You Are: We are currently searching for a Field Service Technician, reporting to a Territory Field Supervisor, to add to our service delivery team to deliver the highest standard of commercial maintenance and customer service to our clients. This is a perfect opportunity for a passionate, skilled commercial technician who is a detail-oriented, self-starter who enjoys travel, variety, autonomy, and being a part of a supportive, growing company. In this role, you will be able to jump in and make an immediate impact. Specifically, you will: • First and foremost, resonate with our mission, vision, and values as an organization and foster a culture of accountability within our workforce that reflects these values., • Utilize your 5+ years of commercial maintenance experience in plumbing, electrical, drywalling, carpentry, and flooring in addition to your high school diploma or equivalent vocational certification(s), proven mechanical aptitude, and proficiency in reading assembly and blueprint drawings to deliver exceptional service to our customers with minimal direct supervision., • Be the eyes and ears in the field, responsible for successfully completing service tickets in a designated territory in a cost conscience, high-quality, timely manner., • Maintain clear lines of professional communication with lead technician(s), field supervisor(s), field Manager(s), and office staff on open issues and progress of all work assigned including thorough documentation., • Be flexible and cooperative with fellow employees and customers while displaying a high level of professionalism., • Follow all policies and procedures to ensure proper and safe working conditions., • Travel up to several hundred miles per week to client sites and meet the demands of a flexible on-call schedule., • Provide your own reliable transportation (capacity to transport tools and equipment (e.g. 16 ft., ladder, sheet rock, sewer machine), valid driver’s license, hand tools, and toolbox suitable for the job (a list of those recommended will be provided)., • Be able to lift up to 80 lbs., apply up to 200 pounds of torque, and perform work while bending, stooping, standing, sitting, and lying down. What You’ll Get: Besides working with a great team in a stable and fast-growing company, you’ll receive a competitive hourly base pay rate between $25.00 to$35.00 per hour, along with, • Competitive medical, dental, and vision insurance, • Optional Life and long-term disability insurance, • Optional Voluntary AD&D and short-term disability insurance, • 401(k) with a 6% match, • Paid time off, • 6 paid company holidays, • Flexible work schedule, • Job Satisfaction If you are a versatile, skilled commercial field service technician who enjoys travel, variety, autonomy, and is looking to join a supportive, growing company where your experience will be valued, we’d love to talk with you! Tools Required: Battery power tools Drill/Driver Impact Driver Circular saw Oscillating saw Saws-all/Reciprocating saw Sander Spare batteries/charger Brad Nailer Socket/Ratchet set (various sizes) Crescent wrenches (various sizes) Channel Lock (various sizes) Lineman pliers Needle nose Pipe wrenches (various sizes) Multimeter Non-contact voltage tester Receptable tester Hammers (claw/2-3lb mini sledge) Tape measure Levels Speed square Drywall tools (various sizes) Angle grinder Hammer drill

Job Description General Summary This position works under minimal supervision and is responsible for operating one or more of the Injection Molding Production Lines as assigned that shift. Duties and Responsibilities (essential duties are italicized) 1. Production line operation a. Pulls work orders at the beginning of the shift and throughout the shift as needed. b. Verifies work order labels and data, ensuring accuracy prior to starting production. c. Inspects product type, label, color, and molding uniformity. d. Loads appropriate label file. e. Runs production equipment at standard rates set by Company. f. Begins production run, per work order. g. Comfortable using a weight scale for accuracy. h. Prints and labels boxes. i. Pulls flattened case boxes and assembles enough of them for that shift. j. Prints and labels cases. k. Performs final assembly and/or packaging of molded parts l. Records production run data on work order and in ERP System (EPICOR) m. Stops machine at the end of the run. n. Cleans and maintains production machines and work areas. 2. Performs basic troubleshooting on machine, resolving basic problems as trained., 3. Escalates machine problems to the Maintenance Team and or Lead as required., 4. Performs in a manner consistent with company Core Values and Purpose., 5. Attends all scheduled meetings, missing no more than 10% annually., 6. Clocks in and out for work and lunch with no more than 1 error per month., 7. Provides excellent customer service., 8. Follows all OSHA and other safety guidelines., 9. Actively demonstrates teamwork at all times., 10. Manages any stress on the job, including but not limited to meeting deadlines., 11. Adheres to company safety standards at all times, such that no serious (requiring medical attention) injury occurred during the prior 12-month period., 12. Follows other policies and procedures such that there are no verbal or written warnings during the evaluation period., 13. It’s comfortable working around automated machinery The duties described above are not inclusive. Additional duties may be permanently assigned or required from time to time due to the need to respond to customer needs and remain competitive in the marketplace. Minimum Knowledge, Skills, and Abilities Required 1. Basic computer usage including mouse., 2. Ability to learn label printing software., 3. Basic understanding of English to read work orders and write information., 4. Mechanical aptitude to perform set up, daily start up, tuning, minor repair of filling and packaging., 5. Ability to read and understand work instructions and maintenance manuals., 6. Ability to perform basic addition and subtraction., 7. Ability to use logic to troubleshoot production machine issues., 8. Ability to visually inspect required coding, product labeling, and finished goods to identify defects and to match products with the appropriate packaging., 9. Ability to develop thorough understanding of operational procedures to practice safe manufacturing., 10. Ability to manage stress., 11. Ability to meet physical demands of the job which include, but are not limited to: sitting, walking, bending, pushing, pulling, lifting, and walking for extended periods of time on a concrete floor, and occasionally lifting and carrying items which may weigh up to 50 pounds., 12. Position spends approximately 5% of time sitting at a workstation and 95% standing or walking., 13. Vision must be within or correctable to within normal range., 14. Must work from the Arlington, TX facility and be able to work on time on a regular basis during scheduled shift. Must be available for evening/weekend work as needed., 15. While performing the duties of this job, the Team Member is exposed to production equipment at various times. The noise level in the work environment is usually moderate. Work Environment Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to computers and toxic chemicals and must be able to navigate around production machinery. The noise level in the work environment is usually moderately high. Position starts at between $18.00-$18.50 per hour depending upon experience. Hours are 6:00 am- 2:30 pm M-F with possible mandatory Saturday OT #zr

Job Description General Summary This position works under minimal supervision and is responsible for operating one or more of the Injection Molding Production Lines as assigned that shift. Duties and Responsibilities (essential duties are italicized) 1. Production line operation a. Pulls work orders at the beginning of the shift and throughout the shift as needed. b. Verifies work order labels and data, ensuring accuracy prior to starting production. c. Inspects product type, label, color, and molding uniformity. d. Loads appropriate label file. e. Runs production equipment at standard rates set by Company. f. Begins production run, per work order. g. Comfortable using a weight scale for accuracy. h. Prints and labels boxes. i. Pulls flattened case boxes and assembles enough of them for that shift. j. Prints and labels cases. k. Performs final assembly and/or packaging of molded parts l. Records production run data on work order and in ERP System (EPICOR) m. Stops machine at the end of the run. n. Cleans and maintains production machines and work areas. 2. Performs basic troubleshooting on machine, resolving basic problems as trained., 3. Escalates machine problems to the Maintenance Team and or Lead as required., 4. Performs in a manner consistent with company Core Values and Purpose., 5. Attends all scheduled meetings, missing no more than 10% annually., 6. Clocks in and out for work and lunch with no more than 1 error per month., 7. Provides excellent customer service., 8. Follows all OSHA and other safety guidelines., 9. Actively demonstrates teamwork at all times., 10. Manages any stress on the job, including but not limited to meeting deadlines., 11. Adheres to company safety standards at all times, such that no serious (requiring medical attention) injury occurred during the prior 12-month period., 12. Follows other policies and procedures such that there are no verbal or written warnings during the evaluation period., 13. It’s comfortable working around automated machinery The duties described above are not inclusive. Additional duties may be permanently assigned or required from time to time due to the need to respond to customer needs and remain competitive in the marketplace. Minimum Knowledge, Skills, and Abilities Required 1. Basic computer usage including mouse., 2. Ability to learn label printing software., 3. Basic understanding of English to read work orders and write information., 4. Mechanical aptitude to perform set up, daily start up, tuning, minor repair of filling and packaging., 5. Ability to read and understand work instructions and maintenance manuals., 6. Ability to perform basic addition and subtraction., 7. Ability to use logic to troubleshoot production machine issues., 8. Ability to visually inspect required coding, product labeling, and finished goods to identify defects and to match products with the appropriate packaging., 9. Ability to develop thorough understanding of operational procedures to practice safe manufacturing., 10. Ability to manage stress., 11. Ability to meet physical demands of the job which include, but are not limited to: sitting, walking, bending, pushing, pulling, lifting, and walking for extended periods of time on a concrete floor, and occasionally lifting and carrying items which may weigh up to 50 pounds., 12. Position spends approximately 5% of time sitting at a workstation and 95% standing or walking., 13. Vision must be within or correctable to within normal range., 14. Must work from the Arlington, TX facility and be able to work on time on a regular basis during scheduled shift. Must be available for evening/weekend work as needed., 15. While performing the duties of this job, the Team Member is exposed to production equipment at various times. The noise level in the work environment is usually moderate. Work Environment Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to computers and toxic chemicals and must be able to navigate around production machinery. The noise level in the work environment is usually moderately high. Position starts at between $18.00 per hour. This position pays a shift differential of $.75 more per hour worked during B shift. B Shift hours are 2:00pm- 10:30pm. M-F with possible mandatory Saturday OT

Job Description General Summary This position works under minimal supervision and is responsible for operating one or more of the Injection Molding Production Lines as assigned that shift. Duties and Responsibilities (essential duties are italicized) 1. Production line operation a. Pulls work orders at the beginning of the shift and throughout the shift as needed. b. Verifies work order labels and data, ensuring accuracy prior to starting production. c. Inspects product type, label, color, and molding uniformity. d. Loads appropriate label file. e. Runs production equipment at standard rates set by Company. f. Begins production run, per work order. g. Comfortable using a weight scale for accuracy. h. Prints and labels boxes. i. Pulls flattened case boxes and assembles enough of them for that shift. j. Prints and labels cases. k. Performs final assembly and/or packaging of molded parts l. Records production run data on work order and in ERP System (EPICOR) m. Stops machine at the end of the run. n. Cleans and maintains production machines and work areas. 2. Performs basic troubleshooting on machine, resolving basic problems as trained., 3. Escalates machine problems to the Maintenance Team and or Lead as required., 4. Performs in a manner consistent with company Core Values and Purpose., 5. Attends all scheduled meetings, missing no more than 10% annually., 6. Clocks in and out for work and lunch with no more than 1 error per month., 7. Provides excellent customer service., 8. Follows all OSHA and other safety guidelines., 9. Actively demonstrates teamwork at all times., 10. Manages any stress on the job, including but not limited to meeting deadlines., 11. Adheres to company safety standards at all times, such that no serious (requiring medical attention) injury occurred during the prior 12-month period., 12. Follows other policies and procedures such that there are no verbal or written warnings during the evaluation period., 13. It’s comfortable working around automated machinery The duties described above are not inclusive. Additional duties may be permanently assigned or required from time to time due to the need to respond to customer needs and remain competitive in the marketplace. Minimum Knowledge, Skills, and Abilities Required 1. Basic computer usage including mouse., 2. Ability to learn label printing software., 3. Basic understanding of English to read work orders and write information., 4. Mechanical aptitude to perform set up, daily start up, tuning, minor repair of filling and packaging., 5. Ability to read and understand work instructions and maintenance manuals., 6. Ability to perform basic addition and subtraction., 7. Ability to use logic to troubleshoot production machine issues., 8. Ability to visually inspect required coding, product labeling, and finished goods to identify defects and to match products with the appropriate packaging., 9. Ability to develop thorough understanding of operational procedures to practice safe manufacturing., 10. Ability to manage stress., 11. Ability to meet physical demands of the job which include, but are not limited to: sitting, walking, bending, pushing, pulling, lifting, and walking for extended periods of time on a concrete floor, and occasionally lifting and carrying items which may weigh up to 50 pounds., 12. Position spends approximately 5% of time sitting at a workstation and 95% standing or walking., 13. Vision must be within or correctable to within normal range., 14. Must work from the Arlington, TX facility and be able to work on time on a regular basis during scheduled shift. Must be available for evening/weekend work as needed., 15. While performing the duties of this job, the Team Member is exposed to production equipment at various times. The noise level in the work environment is usually moderate. Work Environment Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to computers and toxic chemicals and must be able to navigate around production machinery. The noise level in the work environment is usually moderately high. Position starts at between $18.00-$18.50 per hour depending upon experience. This position pays a shift differential of $1.00 more per hour worked during C shift. C Shift hours are 10:00pm- 6:30 am. M-F with possible mandatory Saturday OT #zr