Medical assembly jobs in Tampa, FloridaCreate job alerts

Job DescriptionSeeking an experienced Transformer Assembly Oversite Technician for direct hire, long-term roles with one of the fastest-growing industrial electrical service contractors in the nation, known for delivering high-quality transformer maintenance, electrical testing, electrical construction and distribution system solutions with HQ in Tampa, FL. This is a National full-time travel position. If you’re passionate about electrical systems and want to be part of a team that values your expertise, this is the role for you! Pay: $65/h-$85/h depending on experience. Benefits: Yearly bonus, Comprehensive Employee Benefits: 401k, Medical, dental, Vision insurance, PTO and more! Travel: Primarily across Florida State. All expenses are paid and per diem is available! If applicable, there is vehicle allowance, and gas card Responsibilities for Transformer Assembly Oversite Technician • Oversee field assembly of power transformers, ensuring adherence to OEM manuals, drawings, torque charts, and work instructions., • Verify critical steps: tank inspection, core/coil handling, tap changer installation and alignment, bushing assembly, gasket prep and sealing, conservator/radiators/fans/pumps installation, oil processing/vacuum dry out, and final checks., • Witness and document hold points, inspections, and tests per ITP/QCP (Inspection & Test Plan / Quality Control Plan)., • Review and validate manufacturer’s specifications, drawings (GA, wiring diagrams, schematics), and field change notices before execution., • Maintain daily reports, photo records, punch lists, non conformance reports (NCRs), and corrective actions., • Confirm torque values, clearances, and alignment meet specification; verify material certificates, serial numbers, and BOM traceability., • Ensure proper cleanliness, moisture control, and contamination prevention practices throughout assembly., • Witness field tests (as required): insulation resistance, turns ratio (TTR), winding resistance, power factor/DDF, excitation current, SFRA, CT polarity and ratio, and functional checks of OLTC controls/auxiliaries., • Confirm test instruments are within calibration and results meet acceptance criteria; escalate deviations promptly. Technical Qualifications: • Transformer components (core/coil, windings, OLTC/DETC, bushings, conservator, radiators, cooling systems, gauges/relays, CTs/PTs), assembly sequencing, cleanliness and moisture control., • Oil handling (vacuum fill, degasification, dehydration), leak prevention, gasket selection/prep, torque practices., • Field test witnessing and acceptance criteria familiarity (IR, TTR, winding resistance, PF/DDF, SFRA). Qualifications: • Experience: 5+ years hands- on experience with transformer assembly (medium/large power transformers preferred; distribution transformer experience considered if assembly responsibilities were significant)., • Exposure to NDT basics (e.g., leak detection, dye penetrant on weld repairs—witness level)., • Experience with CMMS or quality systems (e.g., NCR/CAPA workflows)., • Basic familiarity with SCADA/relay interfaces for auxiliaries and controls (witnessing and point-to- to point checks)., • Certifications: OSHA 10/30, NFPA 70E training, Rigging/Signaling, First Aid/CPR., • Ability to read and interpret electrical drawings and wiring diagrams; basic multimeter usage for verification. If you are interested in learning more about this role, please submit your resume for immediate consideration! Feel free to text “Transformer” to 321-418-6672 for faster response. INDH Powered by JazzHR R22ABLN780

Job DescriptionPackaging Operator - 1st Shift 7:00am - 3:30pm Mon-Fri Tampa, FL 12 Months with a high possibility of extension Summary: Operates and tends machine that performs one or more packaging functions, such as filling, marking, labeling, tying, packing, or wrapping containers. 1-3 Years Experience Summary Execute assembly instructions per Batch Record requirements for Packaging and Labeling processes in compliance with cGMP guidelines. This will require on time and neat documentation during the execution to assure compliance. Provide support to the Manufacturing Group, QA, Warehouse and Facility operations by complying with company and FDA cGMP requirements. Responsible for the performance of cleaning of Primary and Secondary Packaging rooms and Packaging equipment. This will include the corresponding Room Sanitizations per Departments procedures. Key Accountabilities: • Follow batch record instructions in the execution of manual process for Primary and Secondary Packaging as applicable., • Assist in the operation and set-up of automated equipment in the performance of certain primary or secondary packaging operations., • Assist in the reconciliation and movement (Chain of custody) of materials between packaging areas and the warehouse., • Report any observations to QA, Team Lead, Equipment Specialist CPS Project Coordinator or Manager of potential issues that could result in deviation or investigation., • Perform Cleaning and Sanitization of Primary and Secondary Packaging rooms., • Support the Equipment Specialist in the execution of qualification protocols for new equipment as assigned., • Training on SOPs to remain current for job requirements, logbook entries and GMP documentation., • Attend applicable meetings, discussions, etc., in support of these projects to meet the Production Schedule., • Participate in safety processes and meetings as applicable., • Maintain a positive, professional and confidential relationship with sponsors. Comply with all state and federal regulatory requirements and guidelines., • Other applicable duties as assigned., • Adhere to all defined Safety and Sustainability requirements and expectations and seek clarification whenever Safety and Sustainability requirements and expectations are either unknown or unclear, • Promptly report identified Safety and Sustainability issues, problems, deficiencies, errors, incidents, and/or opportunities to management and correct where possible, • Stop work where deemed necessary to maintain safety #TB_PH #ZRHC Why TalentBurst? At TalentBurst, we deliver more than talent, we deliver outcomes. We partner with you to move quickly and connect you to opportunities aligned with your skills and long term growth. Backed by precision, transparency, and results, we connect top talent with leading organizations through trusted partnerships. We offer competitive compensation and comprehensive benefits, including medical, dental, vision, and retirement options. TalentBurst is an equal opportunity employer committed to an inclusive and diverse workforce. Company DescriptionFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website www.talentburst.com or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CAFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website www.talentburst.com or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CA

Job Description Inventory Receiver ABOUT US Since 2002, Green Earth Building Maintenance (GEBM) has provided Fortune 500 companies and other industry leaders with superior, customer-driven project management services for their industrial assembly, warehouse setup, safety installations, and other industrial applications. We are a veteran-owned, international company committed to delivering exceptional service with a focus on superior customer service standards. We specialize in interior warehouse outfitting for some of the world's largest retailers. THE POSITION We are seeking energetic and self-motivated individuals to perform the role of Inventory Receiver for large commercial projects. GEBM Inventory Receivers work together with a GEBM Project Manager and other on- site crew members to track hundreds of shipments of inbound materials from multiple domestic manufacturing facilities and numerous third-party vendor facilities to the project site. The Inventory Receiver is responsible for completing processes that ensure inventory accuracy, effective inbound inventory control and audit-activated activities continue to support shipping and receiving requirements. JOB RESPONSIBILITIES Below is a list of primary responsibilities an Inventory Receiver would expect in their day-to-day. It is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change or new ones may be assigned at any time with or without advanced notice. • Inventory management: An Inventory Receiver’s primary responsibilities would be to receive and add goods into our client’s Enterprise Resource Planning (ERP) inventory system. This will include 3-way matching of shipping documentation against Purchase Orders in a proprietary database and researching missing items and shipments. GEBM Inventory Receivers must be self-motivated, fast- paced, honest, and have exceptional attention to detail., • Proactive problem solving: GEBM Inventory Receivers are expected to apply a proactive approach in routinely tracking all aspects of the warehouse inventory progress. Problem-solving and resolution efforts should be paired with appropriate escalation of current or potential issues., • Responsibility and focus: We expect all GEBM team members to serve as a GEBM ambassador, behaving professionally and responsibly for all your personal actions and work-related obligations. Reporting to work on time, staying on-task, and always being focused on customer service and satisfaction are a daily priority., • Embrace a team environment: Additional responsibilities of a GEBM Inventory Receiver will be to support the GEBM Project Manager on-site with other related tasks, such as, but not limited to, managing the material flow, coordinating shipment and delivery dates, assisting with related inquiries and other site tasks. ARE YOU WHO WE’RE LOOKING FOR? Qualified applicants should hold the following: • Minimum of one (1) year of experience in data entry or logistics planning/operations, • Ability to use a ten (10) key data entry method and proficient at managing inventory and maintaining inventory accounts, • Possess superior task, resource and time management abilities, • Exemplary problem-solving skills that help to identify defects and shortcomings, • Ability to communicate business-related and general information efficiently in verbal and written formats, • Excellent math, organizational, and computer skills required (MS Outlook, MS Word, Advanced user of Excel) Preferred qualifications: • Preferred candidates will have at least five (5) years of experience in ERP specific data entry, logistics planning/operations management or software-based inventory management, • Associate degree in a logistics, operations, or business-related field, • Previous knowledge of any the following: inventory management, order scheduling, logistics and transportation, enterprise level data entry, • Active industry certifications for OSHA 10, AWP, warehouse/industrial forklift and/or scissor lift preferred, but not required THE LOCATION Travel is 100% required. Work sites are out-of-state and at the request of our clients. Inventory Receivers should expect to be away from home up to three (3) months at a time. GEBM covers all travel costs for flights, lodging, rental cars. Team members should expect to be scheduled for work as per client/customer needs. This may include work weeks more than forty (40) hours, weekend and/or overnight shifts. WORK ENVIRONMENT The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employees are expected to wear PPE clothing, including safety or composite shoes. While performing the duties of this job, the employee is frequently required to bend, crawl, sit, talk, move about, hear and speak. They may be required to work in restricted spaces and/or under difficult lighting and access conditions. Noise levels may be high when operating power equipment. Employee may be exposed to outside weather conditions when transporting materials. The employee must occasionally lift and/or move up to sixty (60) pounds and be able to use appropriate support equipment to lift and move greater amounts. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Employee is required to use properly use such safety equipment as is appropriate to the work to prevent injury to self or others. COMPENSATION AND PAYROLL SCHEDULE The Inventory Receiver position is an hourly non-exempt position. GEBM operates on a weekly pay schedule and adheres to all local and federal tax policies. Team members are also eligible for a per diem when located and present at on-site (away from home) projects. TOTAL REWARDS AND BENEFITS Green Earth offers a benefit package in addition to compensation. The following total rewards and benefits are available to employees upon enrollment and via 100% employee payroll deductions after successful completion of a 90-day probationary period (unless otherwise noted): • Medical insurance, • Life Insurance (company contributes the first $10,000), • Dental, vision, short- term disability, critical illness, accident, as well as additional life and accidental death and dismemberment insurance for you and your spouse (voluntary) • 401(k) retirement savings contributions; 6-month eligibility period, • Paid Time Off

Welder – Pembroke, NH | Global Food Processing Equipment Manufacturer | $22–32/hr + Full Benefits This Jobot Job is hosted by: Andrew Kraig Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $22 - $30 per hour A bit about us: Founded over seven decades ago and based in Pembroke, NH, with other offices and facilities worldwide, we are a global leader in designing and manufacturing industrial food processing and packaging equipment. We build customized production lines (from frying and baking systems to conveyors and inspection technology) that help major food brands produce safe, consistent, and high-quality products efficiently. Why join us? • Competitive Compensation: Excellent hourly pay (DOE), • 401(k), • Comprehensive Benefits: Medical, Dental, Vision, Life Insurance, • Paid Holidays, PTO, Sick Leave, and Birthday Off, • Stable Employer: No layoffs in decades, even during downturns, • Collaborative Shop Environment: Tight-knit team with mentorship opportunities, • Consistent Day Shift: 7:00am–3:30pm schedule Job Details Key Responsibilities and Duties: • Perform TIG and MIG welding on large stainless steel industrial equipment, • Weld thin gauge stainless steel (primarily 16 GA) with attention to cosmetic and sanitary standards, • Read and interpret blueprints, drawings, and job orders to determine work requirements, • Assemble and fabricate stainless steel components for fryers, ovens, and conveyor systems, • Ensure welds meet structural and aesthetic standards required for USDA-inspected equipment, • Collaborate with fabrication and assembly teams to meet deadlines and maintain product quality, • Maintain tools, safety standards, and cleanliness in compliance with manufacturing policies You should have most of the following: • High school diploma or equivalent (technical training preferred), • Minimum 3 years of TIG and MIG welding experience (stainless steel preferred), • Experience working with thin gauge metals (16 GA or similar), • Ability to read and interpret mechanical blueprints and drawings, • Strong mechanical aptitude and attention to cosmetic weld quality, • Food or pharmaceutical industry background highly preferred, • Proven ability to meet deadlines and work collaboratively in a production environment Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

OVERVIEW OF POSITION: The Medical Assistant (MA) reports to the Center/Clinic Administrator and provides routine patient care within his/her level of training and functions under the direction/guidance of the clinical supervisor and/or the physician in accordance with relevant state statutes. The Medical Assistant has a duty to provide a standard of care that meets or exceeds that of a reasonably competent and knowledgeable Medical Assistant. The MA organizes the clinical environment and provides support in patient care situations. Support includes but is not limited to assisting physicians and nursing personnel, including those skills listed under Essential Functions below, along with various other procedures under the direct supervision and responsibility of a medical provider.The MA assists in identifying patient needs or problems and communicating data to the provider or other members of the clinical team. The MA delivers quality customer service. Ensures policy and procedures are followed including infection control, privacy and confidentiality. Completes mandatory training. ESSENTIAL FUNCTIONS: • Consistently exhibits behavior and communication skills that demonstrate commitment to superior customer service, including quality and care and concern with each and every internal and external customer., • Represents the Company in a professional manner, following all Company policies and procedures., • Uses, protects, and discloses patients’ protected health information (PHI) only in accordance with Health Insurance Portability and Accountability Act (HIPAA) standards., • Under direction and supervision of physician, administers medications, administers immunizations, EKGs, ear washes, and other patient services. Assists in simple office and minor surgical procedures. Assists with the education of the patient and/or family as directed by the physician., • Exhibits working knowledge of basic Medical Assistant principles and practices. Practices standard infection control precautions., • Performs venipucture under the direction of a physician or advance care practitioner., • Greets patients in courteous and polite manner. Rooms patients; prepares patient(s) for examination., • Contacts patients as needed to give testing results instructions from the physician and scheduling of necessary visits., • Conducts all front office functions as requested., • Answers telephone inquiries and triage calls., • Maintains patient medical records in accordance with Company policy and maintains proper assembly of medical records., • Organizes exam and treatment rooms, stocks and cleans rooms and sterilizes instruments., • Responsible for all laboratory duties including drawing, spinning, prepping blood for testing and maintaining appropriate logs., • Maintains equipment and adequate stock levels of consumables in laboratory area., • Acts as liaison between all independent lab services and the center., • Monitors OSHA compliance of center laboratory., • Enters all test requisitions and encounters in the computer., • Performs other duties as assigned., • Must have consistent, punctual and reliable attendance., • Ability to travel may be required. EDUCATION & EXPERIENCE: Required: • High school graduate, GED or equivalent., • Current, nationally recognized Medical Assistant certification, or the ability to obtain the certification within 180 days of employment. Medical Assistants who are hired prior to receiving their certification are expected to perform at the same level as a “certified” Medical Assistant., • Current Basic Life Support for Healthcare providers (AHA) or CPR/AED for the Professional Rescuer (American Red Cross), or ability to obtain such within 30 days of employment. Preferred: • At least one (1) year of experience as a Medical Assistant., • Knowledge of ICD-10 and CPT coding. Pay: up to 22/hr

Job Description Job Overview AEVEX Aerospace is looking for a warehouse material handler that specializes in crating of finished product. This individual will be responsible for custom shipping crates, crate kits, and general palletizing of oversized equipment using established processes and procedures. This individual will be tasked with being accurate and making sure all crates and pallets that leave our facility will arrive in the same condition as when they left our facility. Essential Functions • Perform routine packing of various aviation equipment shipping domestic and international, • Apply appropriate shipping documentation and labels to outbound shipments, • Follow packaging procedures to ensure the safety of all shipments; includes polishing and cleaning all units, measuring boxes, weighing, cubing, and banding, • Measuring and cutting of wood and assembly of the entire crate used for packing nonstandard/over-sized items, • Packs orders for domestic and international shipment as required for the transportation mode per company guidelines. Builds appropriate boxing/crating when and as required., • Stocks materials or items on assigned racks, shelves, or in bins pending verification of stocking documentation. Reports inventory variances relative to stocking transactions., • Unpacks, checks quantity and condition of incoming parts and materials., • Maintain material inventory including lumber, fasteners, and other material used in the shipping process, • Check products for defects and accuracy, report and replace any defective item before packing, • Follow shipment receiving procedures ensuring the right items have been delivered and Receiving Clerks notified, • Ensure that serial and batch numbers match the product and Sales Order, • Coordinate yard space for inbound/outbound shipments and position units in proper storage areas, • Operate forklift to transport shipments from the storage area to the crating area Standard Essential Functions • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • The ability to complete multiple challenging tasks/projects within agreed time frames and with the appropriate level of critical thinking and quality., • Knowledge of the safe operation of basic power tools, i.e. saws, drill motors air compressors., • Basic math skills, • Basic carpentry skills and experience using hand and power tools as necessary, • Ability to multi-task in a fast-paced work environment, • Strong organizational skills and detail-oriented, • Possess a valid in-state driver's license and possess an acceptable safe driving record, • Be able to operate a forklift and complete our internal forklift training program, • Current forklift certification required. Education / Certifications • High school diploma or general education degree (GED) Experience • Two years' experience in a warehouse or manufacturing environment. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to stand for extended periods of time, • Frequently required to operate hand tools, equipment, heavy machinery, • Frequently required to lift up to 50 pounds For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance • Ability to obtain/maintain a Secret DoD clearance, U.S. Citizenship required. Disclaimer: AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Job Overview AEVEX Aerospace is looking for a warehouse material handler that specializes in crating of finished product. This individual will be responsible for custom shipping crates, crate kits, and general palletizing of oversized equipment using established processes and procedures. This individual will be tasked with being accurate and making sure all crates and pallets that leave our facility will arrive in the same condition as when they left our facility. Essential Functions • Perform routine packing of various aviation equipment shipping domestic and international, • Apply appropriate shipping documentation and labels to outbound shipments, • Follow packaging procedures to ensure the safety of all shipments; includes polishing and cleaning all units, measuring boxes, weighing, cubing, and banding, • Measuring and cutting of wood and assembly of the entire crate used for packing nonstandard/over-sized items, • Packs orders for domestic and international shipment as required for the transportation mode per company guidelines. Builds appropriate boxing/crating when and as required., • Stocks materials or items on assigned racks, shelves, or in bins pending verification of stocking documentation. Reports inventory variances relative to stocking transactions., • Unpacks, checks quantity and condition of incoming parts and materials., • Maintain material inventory including lumber, fasteners, and other material used in the shipping process, • Check products for defects and accuracy, report and replace any defective item before packing, • Follow shipment receiving procedures ensuring the right items have been delivered and Receiving Clerks notified, • Ensure that serial and batch numbers match the product and Sales Order, • Coordinate yard space for inbound/outbound shipments and position units in proper storage areas, • Operate forklift to transport shipments from the storage area to the crating area Standard Essential Functions • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • The ability to complete multiple challenging tasks/projects within agreed time frames and with the appropriate level of critical thinking and quality., • Knowledge of the safe operation of basic power tools, i.e. saws, drill motors air compressors., • Basic math skills, • Basic carpentry skills and experience using hand and power tools as necessary, • Ability to multi-task in a fast-paced work environment, • Strong organizational skills and detail-oriented, • Possess a valid in-state driver's license and possess an acceptable safe driving record, • Be able to operate a forklift and complete our internal forklift training program, • Current forklift certification required. Education / Certifications • High school diploma or general education degree (GED) Experience • Two years' experience in a warehouse or manufacturing environment. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to stand for extended periods of time, • Frequently required to operate hand tools, equipment, heavy machinery, • Frequently required to lift up to 50 pounds For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance • Ability to obtain/maintain a Secret DoD clearance, U.S. Citizenship required. Disclaimer: AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Full-Time Tampa, FL Compensation DOE: Up to $28/hr. Meet your talent advisor Kelly Maxwell Dock Installer to support marina construction and floating dock installation projects based out of Jacksonville, FL. This is an excellent opportunity for a hands-on individual who enjoys working outdoors, traveling, and contributing to large-scale marine construction projects. As a Dock Installer, you’ll assist with the installation and assembly of floating dock systems at project sites. You’ll work closely with crew leadership to ensure projects are completed safely, efficiently, and according to blueprint specifications. • Installing floating docks in the water based on blueprints and project plans, • Operating machinery and equipment in a safe and effective manner, • Transporting and positioning dock floats using forklifts and other equipment, • Aligning and assembling dock sections to meet project specifications, • Using hand tools such as wrenches, rubber mallets, and other equipment to secure materials, • Handling hardware such as bolts, washers, rods, and lumber during assembly, • Following all safety protocols and maintaining a safe work environment, • Reporting construction or safety issues to supervisors, • Supporting additional construction-related tasks as needed, • Previous construction, dock building, or outdoor labor experience preferred, • Ability to read and follow blueprints or work instructions, • Experience operating forklifts or heavy equipment is a plus, • Strong mechanical aptitude and comfort using hand tools, • Must be able to swim or be comfortable working in/around water with a flotation device, • Valid Driver’s License required, • Must have reliable transportation, • Ability to travel up to 75–90% during peak project times, • Dependable with strong work ethic and reliability, • Willingness to work in outdoor environments and varying conditions Perks & Benefits:, • Opportunity to work on unique, large-scale marine construction projects, • Full benefits package (Medical, Dental, Vision, etc.), • 401(k) with company match, • Paid time off and holidays, • Growth opportunities within a specialized construction field, • Team-oriented, hands-on work environment Send your resume to Kelly Maxwell Discover Your Next Opportunity with Career Transitions – A Morales Group Company Find your dream job in accounting, finance, engineering, technology, HR, sales, marketing, and more. Whether you're seeking a permanent role, contract or fractional position, or the next step in your professional journey, our experienced team matches talented professionals like you with top employers. Explore hundreds of exciting openings today—browse permanent, contract, and exempt opportunities across industries. Start your search now: Visit https://www.careertransitionsllc.com/jobs Or https://www.mymainhustle.com We're an equal opportunity employer proudly supporting veterans, individuals with disabilities, and diverse talent. Let us help you land the role that fits your skills and goals—your next chapter starts here! #cthzjb #installer

Job Description Location: Tampa, FL (onsite) NOTE: This is not a remote or hybrid position. PD Power Systems, LLC is seeking a XML Technical Writer and Provisioner to join our integrated product support and documentation team. This individual will collaborate and work primarily with the Engineering Team. This position will involve writing high-quality technical manuals and performing hands-on procedure validation to verify accuracy. The role will involve an understanding of engineering assembly structure, the U.S. military's FLIS parts database, creating an exploded view in SolidWorks and vector graphics, and generating accompanying XML code with applicable data. Do not be intimidated if these terms are new to you - initiative, curiosity, and ownership are the requirements! Roles and Responsibilities • Write technical manuals using varying source material, including engineering drawings and CAD models - quality and accuracy are valued over volume, • Hands-on procedure validation - observe users perform tasks and record feedback, • Develop and curate parts lists and create a parts break-down, • Perform research on spare/replacement parts from military and commercial sources Experience and Education • 2 or 4-year degree in any engineering discipline, • Hands-on technical experience with mechanical/electrical equipment, such as vehicles or power generation systems, • Prior experience in technical writing, • Prior experience in any aspect of military Integrated Product Support (IPS), • MIL-STD-40051-2D Army technical manuals - XML; Arbortext, • MIL-DTL-37929 Air Force technical orders - SGML, • BONUS: military experience, especially a related MOS such as 12 or 91 series Technical Skills • Microsoft Office (Word, Excel, PowerPoint), • Vector graphics (CorelDraw or Adobe Illustrator), • Programming in Python, • XML and Arbortext, • SolidWorks CAD, • Powerlog provisioning system Personal Skills • Excellent verbal and written communication skills, problem solving abilities., • Ability and flexibility to travel domestically and internationally - up to 20%, • Must be eligible to receive U.S. Security Clearance (Note: You must be a U.S. citizen in order to obtain a security clearance.) Salary: • Based on education and experience. Benefits: • Medical, • Dental, • Vision, • 401(k), • PTO PD Power Systems, LLC is an equal opportunity employer and prohibits discrimination and harassment of any kind. PD Power Systems is committed to the principle of equal employment opportunity for all employees and job applicants and to provide employees with a work environment free of discrimination and harassment. Employment decisions at PD Power Systems are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate.

Job Description U.S. Water Services Corporation, a well-established and diverse water and wastewater utility operations, maintenance, engineering, and construction services corporation, has an opening for a full-time Electric Motor Repair Technician in Bradenton, FL. U.S. Water is a fast paced and rapidly expanding company headquartered in New Port Richey, Florida with a current staff of over eight hundred employees in twenty states. Inside Sales/Outside Sales Representative – Lift Station Manufacturing Location: Tampa, FL Job Type: Full-Time, Senior Level Role Overview We are seeking a seasoned Inside Sales/Outside Sales Representative to help with our Tampa operations. This is not a general management position; prior experience within the lift station or wastewater industry is strictly required. You will be the central point of leadership, bridging the gap between local sales growth and technical production execution. Key Responsibilities • Targeted Sales: Leverage your industry knowledge to drive lift station sales, consulting with municipal and private contractors on technical specifications and pump system requirements., • Production & Scheduling: Oversee the manufacturing floor, managing timelines for assembly, basin fabrication, and electrical control integration to ensure on-time delivery., • Office & Operations Management: Direct all branch administrative functions, including P&L responsibility, inventory procurement, and team leadership., • Safety & Compliance: Ensure all production meets environmental and OSHA standards specific to heavy industrial manufacturing. Mandatory Qualifications • Industry Experience: Minimum 5+ years of direct experience in the lift station, pump system, or wastewater equipment industry., • Technical Literacy: Deep understanding of lift station components (submersible pumps, valves, basins, and control panels)., • Proven Leadership: Experience managing both a production workforce and an administrative office team., • Local Market Knowledge: Familiarity with the Jacksonville/North Florida construction and utility landscape is a major plus. Compensation & Benefits • Salary: Competitive base + performance-based bonuses., • Benefits: Full medical/dental/vision, 401(k) with company match, and vehicle allowance. Compensation and Benefits: Pay is commensurate with experience and market-reflective. US Water/USW Utility Group offers a comprehensive benefits package including medical, dental, vision, life insurance, short/long-term disability, paid time off, holiday pay and 401(k) with company match. US Water/USW Utility Group offers competitive wages and benefits and is committed to hiring and retaining a diverse workforce. We are an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, national origin, age, veteran status, disability, or any other protected class Job Posted by ApplicantPro

Job Description Work Arrangement Onsite with occasional travel. Job Overview AEVEX Aerospace is seeking a Senior Program Manager to manage the development and assembly of aircraft with enhanced special mission capabilities to support unique DoD and commercial customers requirements. They will provide expert leadership and direction across complex unmanned systems programs, with a particular focus on operations that utilize additive manufactured components. This role requires deep knowledge of operational execution, engineering, system test, maintenance, and technical management practices, combined with the ability to lead multidisciplinary teams in a fast-paced environment. This person will oversee all aspects of a project, from planning and design to execution and delivery. Essential Functions • Provide senior-level expertise across operations, engineering, maintenance, system test, and technical management disciplines in support of assigned unmanned systems programs., • Lead programs that incorporate additive manufactured components, ensuring integration of AM technologies into design, qualification, production, and sustainment processes., • Work directly with customers to define requirements, develop executable work plans, and ensure timely, quality delivery of program objectives., • Ensure all programs are executed with the highest standards of safety, compliance, and technical rigor, including adherence to AM quality controls, configuration management, and flightworthiness requirements., • Maintain a high-performing team that embodies AEVEX values, professional standards, and a culture of accountability, innovation, and collaboration., • Provide clear communication of expectations and develop forward-leaning strategies that enhance organizational capability, particularly in AM-enabled rapid prototyping, low-rate production, and accelerated fielding of unmanned platforms., • Advise senior executives on operational readiness, training, staffing, and workforce planning, including specialized roles supporting additive manufacturing and unmanned systems integration., • Build and sustain strong relationships with peers, subordinates, and customers; influence strategic and operational planning with expert technical and programmatic guidance., • Demonstrate agility and adaptability in managing emerging requirements, resolving challenges, and maintaining alignment with organizational priorities., • Drive alignment and achievement of strategic objectives and performance goals across programs, business units, and support teams., • Manage all aspects of assigned programs, including cost, schedule, performance, and risk, with an emphasis on disciplined execution and continuous improvement., • Employ industry best practices and tools to ensure programs meet or exceed financial, technical, and operational performance targets., • Collaborate with the Director of Programs and Growth Team to identify future opportunities, support capture activities, develop program strategies, and expand AM and unmanned systems capabilities for new and existing customers., • Develop and implement processes to identify, assess, monitor, and mitigate risks throughout the program life cycle, including technical risk associated with AM-produced components and rapid flight systems., • Support proposal development as a subject matter expert, providing technical solutions, program structures, and cost inputs; may lead a team of SMEs in developing technical volumes., • Represent AEVEX professionally and effectively in all internal and external engagements, fostering trust and long-term partnerships., • Perform other duties as assigned., • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • Demonstrated expertise in the Microsoft Office suite, including advanced proficiency in Microsoft Project., • Experience developing, maintaining, and managing Integrated Master Schedules (IMS) for complex programs., • Excellent verbal and written communication skills, with the ability to interface effectively with customers, cross-functional teams, and technical personnel at all levels., • Strong analytical skills with the ability to assess technical, operational, and programmatic issues and recommend sound solutions., • Proven ability to manage multiple projects simultaneously in a fast-paced environment, including controlling scope, schedules, and deliverables to ensure program success., • Self-starter with strong judgment; knows when to seek guidance but is highly capable of working independently with minimal oversight., • Highly detail-oriented, organized, and committed to exceptional work quality and follow-through., • Demonstrated experience leading and managing teams to deliver projects on schedule and within budget while maintaining high customer satisfaction., • Experience working with subcontractors and vendors, including development of statements of work, definition of technical requirements, negotiation of terms, and management of performance., • Demonstrated leadership skills with a strong passion for collaboration, team-building, and fostering a positive work environment. Leadership Competencies • Directs and provides expert knowledge in the day-to-day function of the department., • Identifies, recruits, and retains top-notch talent., • Champions AEVEX's culture and empowers employees to take responsibility for their jobs and goals., • Coaches, mentors, engage and develop the team, including overseeing new employee onboarding and providing career development planning and learning opportunities., • Sets performance standards and encourages employee engagement and results through delegation, continuous feedback, goal setting, and performance management., • Maintains transparent communication. Appropriately communicates organization information through department meetings, one-on-one meetings, and appropriate email, and regular interpersonal communication., • Provides oversight and direction to the employees in accordance with AEVEX's policies and procedures., • Decision-Making: Exercises sound judgment under pressure; makes timely, data-driven decisions while balancing technical, operational, and business considerations., • Influence and Communication: Communicates with clarity, confidence, and purpose; effectively engages customers, executives, and cross-functional teams to align priorities and drive outcomes., • Team Leadership: Builds, motivates, and develops high-performing multidisciplinary teams; fosters a culture of accountability, collaboration, and continuous improvement., • Customer Focus: Maintains strong customer relationships, anticipates customer needs, and ensures delivery of high-quality solutions that meet or exceed expectations., • Adaptability and Agility: Responds effectively to changing priorities, emerging risks, and evolving technology, particularly in rapid-development and AM-enabled environments., • Execution Excellence: Drives disciplined program execution, ensuring cost, schedule, and performance objectives are met; maintains a focus on safety, compliance, and operational readiness., • Innovation Mindset: Encourages creative problem-solving and the application of new technologies such as additive manufacturing to improve capability, reduce cycle times, and strengthen competitive advantage., • Collaboration and Influence: Works seamlessly across organizational boundaries, leveraging relationships with engineering, operations, supply chain, and leadership to solve complex challenges., • Integrity and Accountability: Demonstrates ethical leadership, transparency, and ownership of decisions; holds self and others accountable to high professional standards. Education / Certifications • Bachelor's degree in Engineering, Aerospace, Mechanical, Systems Engineering, Business, or a related technical discipline required., • Master's degree in Engineering, Program Management, Business Administration (MBA), or related field preferred., • Project Management Professional (PMP), Program Management Professional (PgMP), or DAU equivalent certification strongly preferred., • Training or certification in aerospace program management, systems engineering, or airworthiness processes (e.g., MIL-STD, AS9100, FAA / DoD frameworks) is advantageous., • Familiarity with additive manufacturing standards or training (ASTM F42, SAE AMS-AM, or similar) is considered a plus. Experience • 15 or more years Program/Project Management experience., • Preferred: Experience with additive manufacturing technologies, processes, and quality management as applied to unmanned systems, rapid prototyping, or low-rate production environments. Physical Requirements Frequently required to sit, and to reach to use computers and other office equipment Note: For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance • Has a Secret DoD clearance upon start of employment and has the ability to obtain/maintain a TS/SCI clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job DescriptionProduction |$17.50 Hourly| Monday- Friday 6:00 am-3:00 pm with overtime What Matters Most • Competitive Pay of $17.50, • Schedule: Monday- Friday 6:00 am-3:00 pm with overtime to include Saturdays, • Location: Tampa, FL, • Temporary-to-hire opportunity with career growth and stability, • Weekly Pay with direct deposit or pay card, • When you work through The Reserves Network, you are eligible to enroll in dental, vision, and medical insurance as well as 401K, direct deposit, and our referral bonus programJob Description:This role demands a combination of technical expertise, attention to detail, and physical stamina to assemble coils efficiently and accurately.Your New Role:, • Construct coils for HVAC systems by assembling aluminum fin plates and copper tubing based on engineering specifications and blueprints., • Inspect components and assemblies to ensure quality and adherence to specifications., • Utilize hand tools, power tools, and machinery to complete assembly tasks., • Solder and braze components as required., • Perform routine maintenance on tools and equipment., • Follow all safety guidelines and procedures., • Work closely with team members to meet production goals., • Record assembly processes and outcomes as needed., • Package and prepare completed coils for shipment., • Participate in training to stay updated on new techniques and industry standards.What You Need:, • Previous experience in HVAC or manufacturing., • Proficient in soldering, brazing, and using hand/power tools., • Ability to read and interpret technical drawings., • Strong problem-solving abilities., • Able to stand for long periods and lift heavy objects., • Ability to work independently and as part of a team., • High school diploma or equivalent., • Basic knowledge of mechanical systems., • Strong focus on accuracy and quality., • Basic math skills for measurements and calculations.Your New Organization:A fully American- owned business that designs and produces custom heat transfer coils, fluid coolers, and air-cooled condensers for a variety of markets. Ongoing investments in our team and processes enable us to deliver exceptional flexibility and reliable products. Committed to high-quality manufacturing standards. Your Career Partner:The Reserves Network, a veteran-founded and family-owned company, specializes in connecting exceptional talent with rewarding opportunities. With extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. The Reserves Network values diversity and encourages applicants from all backgrounds to apply. As an equal-opportunity employer, we foster an environment of respect, integrity, and trust in every aspect of employment.In the spirit of pay transparency, we want to share the base salary range for this position is $17.50 hourly not including benefits, potential bonuses or additional compensation. If you are hired, your base salary will be determined based on factors such as individual skills, qualifications, experience, and geographic location. In addition, we also believe in the importance of pay equity and consider the internal equity of our current team members as a part of any final offer. Please keep in mind that the range mentioned above is the full base salary range for the role. Hiring at the maximum of the range would not be typical in order to allow for future & continued salary growth #TRN321IN

Job Description Work Arrangement This is an onsite position. Offsite travel related to training/ customer events maybe required. Job Overview As an Engineering Technician, you'll play a key role in supporting R&D projects and collaborating with cross-functional portfolio teams. You'll be involved in the end-to-end development of hardware prototypes, contributing to the design and assembly of PCB, mechanical components, and software scripts. Your work will include conducting tests and experiments that drive development toward manufacturing readiness, while maintaining thorough documentation and process records to track test data and results. This is a dynamic, fast-paced environment where collaboration is at the heart of everything we do. You'll have opportunities to explore a variety of projects and engage with a talented team of engineers to share knowledge and expertise. Essential Functions • Troubleshoot electronic systems to identify and resolve issues, • Diagnose and repair circuit boards, • Solder PCBs with Surface-Mounted Components (SMCs), • Test circuit boards using oscilloscopes, digital multimeters, spectrum analyzers, and other test equipment, • Perform SMT (Surface-Mount Technology) soldering on circuit boards, • Solder wire harnesses and making cables based on minimal documentation, • Modify circuit boards using wire jumpers and PCB trace modifications, • Support 5S and Lean processes to maintain a clean and efficient work environment, • Document test procedures and data for repeatability and consistency, • Collaborate with cross-functional teams to ensure timely completion of testing and projects, • Assist in the construction of testing platforms and event setups, • Review and interpret PCB layouts for accurate implementation, • Perform other duties as assigned. Standard Essential Functions • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • Solid knowledge of Electrical SMT and Software, • Knowledge of Analog, Digital, and Power circuits, • Ability to understand schematics, assembly drawings, and PCB layout, • Understanding of Electrical equipment (O-Scopes, DMM), • Knowledge of SMT Soldering (Micro-soldering), • Knowledge on Microsoft office (Excel, Word, Power point, ect.), • Ability to work well in a team as well as collaborate with other teams, • Able to obtain new skills quickly, • Able to work with supervision, • Ability to multi-task and work on multiple projects in a fast-paced environment; able to support project tasks, scope change, and schedules to keep technical projects on-track, • Strong verbal and written communication skills, • Preferred Knowledge in:, • Altium PCB layout software, • Cable wiring for RC planes, • Understanding Gas engines, • Understanding electrical motors, • J-Standard Education / Certifications • Associate degree in engineering or technical field preferred Experience • 3-5 years of experience as an engineering technician or other relevant technical field, • Equivalent documented work experience in lieu of degree may be acceptable, • Experience with troubleshooting PCB's and electrical system Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Frequently required to stand for extended periods of time Frequently required repetitive movements of wrists, hands, and/or fingers For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance • Ability to obtain/maintain a Secret DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Job Overview We are a high-paced and agile manufacturing organization that is growing rapidly. We are searching for a multi-faceted production and manufacturing engineer. We are looking for someone who understands formal manufacturing environments and is able to focus on the key elements that will take us to the next level. This role is broad from shaping our MRP system to evolving material and production management systems to planning production. Essential Functions • Evaluates existing manufacturing processes to improve them, working broadly from supply chain to business systems to help things run smoothly., • Develops manufacturing processes by studying product requirements, researching testing methods, and conferring with equipment vendors., • Designs and implements tooling on the production floor., • Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout., • Assures product and process quality by designing and implementing testing methods where required., • Provides manufacturing decision-making information by calculating production, labor, and material costs., • Prepares product and process reports by collecting, analyzing, and summarizing information and trends., • Provides manufacturing engineering information by answering questions and requests., • Maintains product and company reputation by complying with government regulations., • Keeps equipment operational by coordinating maintenance and repair services., • Maintains product and process database by creating assembly work instructions., • Completes design and development projects by training and guiding technicians., • Performs other related duties as assigned. Standard Essential Functions • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • Highly skilled in CAD/CAM software and manufacturing simulation tools., • Strong ability to interoperate and explain mechanical and electrical drawings to production technicians., • Excellent analytical and problem-solving skills., • Strong Ability to be flexible in various work scenarios to adjust priorities needed to meet evolving requirements and challenges., • Demonstrative ability to be proactive and take initiate to during day-to-day tasks., • Strong ability to work independently, confidently making decisions to guide other towards project goals., • Strong ability to work efficiently in a collaborative team environment., • Excellent written and verbal communication skills to effectively convey ideas, provide guidance and collaborate with other team members., • Comprehensive understanding of regulatory and industry standards, such as FAA regulations, AS9100, ISO 9001, and IPC-610/620. Education / Certifications • Bachelor of Science in engineering or related field required. Experience • Minimum of 6-9 years of manufacturing experience, • Defense manufacturing is a plus, • Experience with an MRP system, • Experience with composites a plus, • Experience working with contract manufacturing a plus, • Experience using CAD or CAM software (SolidWorks preferred) Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to sit, and to reach to use computers and other office equipment, • Occasionally required to stand for extended periods of time, • Occasionally required to lift up to 15 pounds For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance • Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required. Disclaimer: AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Work Arrangement This is an onsite position. Job Overview As an Engineering Technician, you'll play a key role in supporting R&D projects and collaborating with cross-functional portfolio teams. You'll be involved in the end-to-end development of hardware prototypes, contributing to the design and assembly of PCB, mechanical components, and software scripts. Your work will include conducting tests and experiments that drive development toward manufacturing readiness, while maintaining thorough documentation and process records to track test data and results. This is a dynamic, fast-paced environment where collaboration is at the heart of everything we do. You'll have opportunities to explore a variety of projects and engage with a talented team of engineers to share knowledge and expertise. Essential Functions • Diagnose and troubleshoot system issues to identify faulty components, • Conduct troubleshooting for both electrical and mechanical systems to ensure optimal performance, • Use oscilloscopes and digital multimeters (DMM) to thoroughly test Systems, • Solder wire harnesses and making cables based on minimal documentation, • Assist in diagnosing and resolving technical challenges, contributing to project success., • Configuration, troubleshooting, data analysis, and integration of a wide variety of applications and equipment such as (GPS receivers, LiDAR sensors, Inertial sensors, network routers, radio modems, meteorological sensors, serial port hubs, etc.), • Execute software configuration checks and validate system build states using Ground Control Station (GCS) tools and Mission Planning Software as directed., • Work with Arduino (or Equivalent) for micro controllers, • Work with raspberry Pi's (or Equivalent) for different platforms and products, • Perform software test and debugging with engineering support., • Contribute to the design, assembly, and testing of UAV frames for advanced projects., • Implement and uphold 5S methodology to streamline workflows and develop efficient lean processes., • Meticulously document testing procedures and data to ensure accuracy and support repeatability in future projects., • Work closely with cross-functional teams to facilitate the testing, completion, and optimization of components., • Assist in building and setting up platforms for both testing and event execution, ensuring functionality and safety., • Carry out additional duties as assigned, contributing to the overall success of engineering and project goals., • Collaborate with Manufacturing team to help push products to delivery, • Perform other duties as required. Standard Essential Functions • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • Solid knowledge of Electrical and Aircraft Systems, • Knowledge of power and mechanical systems, • Knowledge of UAV and CUAV, • Knowledge of Mission Planner Software (or Equivalent UAS software), • Knowledge of Mission Planner Software (or Equivalent UAS software), • Knowledge of uploading GCS parameters/ settings, • Knowledge any software coding/ scripting (Lynx, C++, TTL), • Knowledge on Microsoft office (Excel, Word, Power point, ect.), • Understanding of Electrical equipment (O-Scopes, DMM), • Ability to understand cable drawings, • Collaborates effectively within teams and builds strong working relationships, • Quickly adapts and learns new skills, • Works productively under supervision Education / Certifications • Associate degree in engineering or technical field preferred Experience • 3-5 years of experience as an engineering technician or other relevant technical field, • Equivalent documented work experience in lieu of degree may be acceptable, • Experience with:, • Altium PCB layout software, • Cable wiring for RC planes, • Understanding Gas engines, • Understanding electrical motors, • Mission Planner software, • Electrical testing equipment Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Frequently required to stand for extended periods of time Frequently required repetitive movements of wrists, hands, and/or fingers For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance • Ability to obtain/maintain a Secret DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Work Arrangement This is an on-site position. Job Overview We are seeking a highly skilled and motivated Senior Structural Engineer specializing in aircraft structures to join our team. As a Structural Engineer, you will play a key role in the design, analysis, and optimization of structural components for our unmanned aerial systems (UAS) and unmanned surface vehicles (USV). You will work closely with our engineering team to develop innovative solutions and enhance the performance and reliability of our products. Essential Functions • Collaborate with cross-functional teams to lead the structural layout, structural sizing into conceptual design and through detail design., • Partner with manufacturing team to generate fabrication and assembly work instructions., • Analyzing structural loads on both composite laminates, metallic structures, and plastic components using empirical methods, hand calculations, finite element analysis (FEA)., • Conduct static and dynamic structural analyses using finite element analysis (FEA) tools., • Prepare detailed technical reports, documentation, and presentations for internal and external stakeholders., • Supporting flight test planning, test execution, and aircraft modifications, • Identify and implement innovative solutions to complex structural engineering challenges., • Develop, review, and approve structural designs, ensuring compliance with industry standards and regulatory requirements., • Develop structural design guides and toolsets that can be used by other engineers., • Perform other duties as assigned. Standard Essential Functions Regular and reliable attendance on a full time basis [or in accordance with posted schedule]. Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices. Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • Foundational knowledge of aircraft load paths and structural sizing, • Expert understanding of the theory and practical application of composite structures and their application to aircraft, • Proficiency in finite element analysis (FEA) toolsets such as FEMAP or NASTRAN., • Proficiency with CAD software (e.g., Solidworks, NX, or CATIA)., • Strong analytical and problem-solving skills., • Excellent communication and teamwork abilities., • Excellent analytical and problem-solving skills, • Ability to work with multiple engineering disciplines on an aggressive schedule., • Ability to be flexible in various work scenarios to adjust priorities needed to meet evolving requirements and challenges., • Demonstrative ability to be proactive and take initiate during day-to-day tasks, • Ability work independently, confidently making decisions to guide other towards project goals Education/Certifications • Bachelor's degree in Aerospace Engineering, Mechanical Engineering, Civil Engineering or related field., • Master's Degree us a plus. Experience • 8+ years of structural engineering experience, • Proven experience in structural analysis and design, preferably in aerospace industry., • Hands-on design and build experience., • Rapid prototyping experience., • Defense industry experience is a plus Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Frequently required to sit, and to reach to use computers and other office equipment Occasionally required to stand for extended periods of time Occasionally required repetitive movements of wrists, hands, and/or fingers For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the workday, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance • Ability to obtain/maintain a Top Secret/SCI DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Job Overview The Quality Engineer 1 is responsible for the deployment of processes and controls that ensure assemblies consistently meet design and quality requirements. This role supports production operations through process oversight, root cause analysis, corrective and preventive actions, inspection planning, and continuous improvement initiatives. The individual will work cross-functionally with manufacturing, supply chain, engineering, and program management teams to maintain compliance with AS9100 requirements while driving product reliability, process capability, and operational efficiency. Essential Functions • Generate inspection checklists, procedures, and instructions to ensure repeatable product conformance., • Analyze quality data, trends, scrap, rework, and yield metrics to identify opportunities for process improvement and defect reduction, • Lead and facilitate root cause investigations for internal defects and product escapes using structured problem-solving methodologies such as 8D, 5 Whys, Fishbone, PFMEA, and fault tree analysis., • Develop and implement quality assurance procedures and processes to ensure compliance with industry standards and customer requirements., • Collaborate with cross-functional teams to identify areas for process improvement and drive continuous improvement initiatives., • Maintain accurate documentation of quality processes, test results, and corrective actions., • Ensure compliance with relevant quality standards, regulations, and industry requirements., • Perform other duties as required. Standard Essential Functions • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • Practiced in the creation of inspection forms, attribute checklists, and characteristic acceptance documentation packages with respect to industry standards (e.g. AS9102)., • Skilled in review of fabrication/manufacturing plans with respect to electronic component assembly and systems integration industry specifications (e.g. IPC J-STD-001)., • Able to use metrology and statistical methods to validate quality control practices and verify inspection sampling calculations., • Adept at performing defect and root cause analysis to enable continuous improvement over the entire product life cycle. Education / Certifications • Bachelor's degree in an engineering discipline (desired but not required), • ASQ CQE/CQA Certification (desired but not required) Experience • 3+ years of relevant work within the aerospace industry., • Experience with AS9100 quality systems and aerospace manufacturing processes., • Experienced with standards for the development of system design and integration testing methodologies (e.g. MIL-STD-810) and the associated documentation standards (e.g. DI-NDTI80809/81794). Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to stand for extended periods of time, • Frequently required to sit, and to reach to use computers and other office equipment For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance • Ability to obtain/maintain a TC/SCI DoD clearance, U.S. Citizenship required. Disclaimer: AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Gulf Marine Repair of Tampa, FL is looking to hire full-time Inside Manual Manual Machinist. These positions are paid based on experience. We also offer generous benefits, including 2 medical plans, 2 dental plans, vision, a 401(k) plan with a company match, term life, AD & D, disability, an employee assistance program (EAP), and more. If this sounds like the right opportunity for you in the shipyard industry, consider applying today! Essential Functions As an Inside Machinist, you are responsible for the assembly, installation, modification, and repair of various ship machinery and systems. You set up, service, repair, align, and test machines that operate on a mechanical and electro-mechanical basis. Skilled with precision you utilize tools such as lathes, milling machines, shapers, and grinders to repair machine parts to manufacturer specifications. After evaluating procedures, you recommend changes related to the efficiency of setup and production. QUALIFICATIONS FOR AN INSIDE MACHINIST • 3 years of machining experience (preferred), • General knowledge about ships and machinery, • Ability to align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines, • Ability to read micrometers with low tolerance, • Ability to run all inside shop equipment in an accurate and timely manner, • Ability to prepare written mechanical evaluations, • Ability to read and work from blueprints, • Ability to pass a drug test, • Have basic hand tools Shipyard experience is preferred but multiple factors will be taken into consideration. Do you have a willingness to learn? Are you self-motivated and reliable? Can you work well independently? Do you take pride in doing quality work? If so, you might just be perfect for this important shipyard job! WORK SCHEDULE This full-time machining position works 40+ hours per week. The 1st shift typically runs from 7:30 AM to 4:00 PM. Evenings and weekends are required when needed. READY TO JOIN OUR TEAM? We understand your time is valuable and that is why we have a very quick and easy application process. If you feel that you would be right for this machining job in the shipyard industry, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Gulf Marine Repair is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment for all applicants and employees, and we consider all qualified individuals without regard to legally protected characteristics. Location: 33605 Job Posted by ApplicantPro

Job Description Job Overview The Quality Engineer primarily focuses on quality planning efforts during the development and design phases of the product life cycle. This individual will establish the baseline for project quality objectives based on the definition of requirements provided by the engineering development team, and then develop the documentation necessary to execute them upon contract award. Additionally, the Quality Engineer will develop Quality Assurance Project Plans for new development efforts, including documentation of testing procedures, inspection methods, necessary process controls, and criteria for product acceptance. Essential Functions • Creates Quality Assurance Project Plans (QAPP) for development efforts to capture project specific quality objectives, measurement methods, and criteria for success., • Documents the product acceptance system, including product conformance criteria, validation methodology, testing requirements, process controls, and any specialized inspection/testing equipment needed., • Identifies and describes the standards, practices, conventions and metrics that are to be applied to a project throughout the development and production phase., • Assists in the development of product fabrication/assembly plans including the use of qualified processes, equipment and personnel, tooling and test equipment, supplier certifications, and specialized inspection requirements and sampling rates for procured items., • Interfaces with additional Quality team members to identify failure trends and process deficiencies identified during the production phase for continual improvement of the development phase., • Performs other duties as assigned. Standard Essential Functions • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • Proficient in developing comprehensive Quality Assurance Project Plans (QAPP) aligned with DoD standards (e.g. DI-QCIC-81794)., • Practiced in the creation of inspection forms, attribute checklists, and characteristic acceptance documentation packages with respect to industry standards (e.g. AS9102)., • Experienced with standards for the development of system design and integration testing methodologies (e.g. MIL-STD-810) and the associated documentation standards (e.g. DI-NDTI80809/81794)., • Skilled in review of fabrication/manufacturing plans with respect to electronic component assembly and systems integration industry specifications (e.g. IPC J-STD-001)., • Able to use metrology and statistical methods to validate quality control practices and verify inspection sampling calculations., • Adept at performing defect and root cause analysis to enable continuous improvement over the entire product life cycle. Education / Certifications • Bachelor's degree in Systems Engineering or related discipline., • ASQ CQE/CRE Certification (desired but not required). Experience • 3+ years of relevant work within the aerospace industry. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to sit, and to reach to use computers and other office equipment For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance • Ability to obtain/maintain a Top Secret/SCI DoD clearance, U.S. Citizenship required. Disclaimer: AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Sterile Processing Account Specialist (Hospital-Based) Tampa, FL | Full-Time | Monday–Friday | $60,000–$70,000 (based on experience) + Full Slate of Benefits Ready to use your SPD experience in a role that’s more leadership and problem-solving - and less daily tray assembly? We’re hiring an experienced Sterile Processing professional to support one dedicated hospital account in Tampa, FL. This is a hands-on, clinical role where you act as the on-site expert improving workflows, supporting teams, and keeping the OR running smoothly. No travel. No shift work. No bouncing between facilities. Just one hospital where you can truly make an impact. What You’ll Get • $60,000–$70,000 base salary (based on experience), • Monday–Friday schedule (hours aligned with the facility), • No weekends, no holidays, no travel required, • Health, dental, vision, 401(k), PTO & sick time, • Stable, full-time hospital-based role, • Clear pathway into the medical device industry What You’ll Do • Partner daily with SPD and OR leadership, • Ensure tray readiness and case support, • Audit trays, instrumentation, and workflows, • Identify and fix inefficiencies before they impact cases, • Lead hands-on training and in-services, • Support process improvements and standardization initiatives, • Serve as the hospital’s go-to sterile processing expert This is not a traditional tech role - you’ll spend less time assembling trays and more time improving systems, training teams, and solving problems. What We’re Looking For • 5+ years in Sterile Processing, Central Services, OR, or surgical services, • Strong knowledge of instrumentation and tray workflows, • Comfortable working directly in SPD/OR environments, • CRCST, CBSPD, or CST preferred Great fit for: Senior Techs • Leads • Supervisors • Educators • Managers • OR Liaisons • Clinical Specialists If you’re ready to step out of shift work and into a role with more ownership, visibility, and long-term growth, we’d love to connect. Apply today. Rep-Lite receives a large volume of resumes for each position and regretfully cannot respond to each application. If we have an interest in speaking with you further, we will email a request for a video interview. Sometimes these emails end up in spam/junk so please make sure you are checking them periodically; the sending domain will be @applytojob.com. Thank you for your interest in Rep-Lite and good luck in your search! *“Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Powered by JazzHR OedAd7WAnp

Job Description Job Overview We are a high-paced and agile manufacturing organization that is growing rapidly. We are searching for a multi-faceted production and manufacturing engineer. We are looking for someone who understands formal manufacturing environments and is able to focus on the key elements that will take us to the next level. This role is broad from shaping our MRP system to evolving material and production management systems to planning production. The primary focus will be taking designs from development to production with the majority of the work coming in the form of integration of products into UAV/USVs. Essential Functions • Develops Assembly Work Instructions (AWIs) in conjunction with the development and production teams., • Develops tooling, fixtures, jigs, and shop aids to support production of UAVs/USVs., • Evaluates existing manufacturing processes to improve them, working broadly from supply chain to business systems to help things run smoothly., • Develops manufacturing processes by studying product requirements, researching testing methods, and conferring with equipment vendors., • Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout., • Assures product and process quality by designing and implementing testing methods where required., • Provides manufacturing decision-making information by calculating production, labor, and material costs., • Prepares product and process reports by collecting, analyzing, and summarizing information and trends., • Provides manufacturing engineering information by answering questions and requests., • Maintains product and company reputation by complying with government regulations., • Keeps equipment operational by coordinating maintenance and repair services., • Maintains product and process database by writing computer programs and entering data., • Completes design and development projects by training and guiding technicians., • Performs other related duties as assigned. Standard Essential Functions • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • Strong written and verbal communication skills, • Strong analytical and problem-solving skills, • Ability to lead cross-functional teams, • Effective project management capabilities, • Excellent written and verbal communication skills, • Results-driven with a focus on operational excellence, • Strong manufacturing engineering experience centered around work instructions, test equipment, support equipment design for production Education / Certifications • Bachelor of Science in engineering or related field required., • Masters Degree preferred. Experience • 9+ years of experience in manufacturing engineering roles, • Defense manufacturing is a plus, but not necessary, • Experience using CAD or CAM software (SOLIDWORKS), • Experience with 3D printing, • Experience with fixtures, shop aids, work instructions Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Occasionally required to stand for extended periods of time, • Occasionally required to lift up to 25 pounds, • Frequently required to sit, and to reach to use computers and other office equipment For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance • Ability to obtain/maintain a Secret DoD clearance, U.S. Citizenship required. Disclaimer: AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description FUTURE NEED - Not a current vacancy. If you apply, this could be a multi-year process. Location: Tampa, FL Description: The candidate will be primarily focused on conducting software analysis of embedded products. The focus will be on reverse engineering and potentially vulnerability analysis of provided systems via static and/or dynamic tools and techniques. Enablement of potential further analysis, repeatable exploitation processes, feature addition, and technical reporting are also part of day-to-day activities. Embedded application design and testing may also be performed for the target platforms. Requirements: • Must be a US citizen (No exceptions!), • Must be willing and eligible to obtain a US government security clearance, • Must hold a Bachelor's Degree or higher in Computer Science, Electric Engineering, Computer Engineering or closely related., • Must have experience with various programming and scripting languages (e.g., C, C++, Assembly, Python, and Bash) to be used in embedded device interaction and prototyping, • Must have experience with various microcontroller/microprocessor architectures and their instruction sets (e.g., ARM, x86), • Must have experience with static and dynamic analysis and debugging tools and techniques for embedded targets (e.g., IDA Pro, Ghidra, GDB, JTAG, SWD), • Must have excellent customer service and communication skills as well as the ability to prioritize and meet deadlines., • Must have strong leadership interpersonal and verbal/written communications skills that enable the ability to work effectively in a collaborative team environment Desirable: • Familiarity with various traditional operating systems as well as Real Time Operating Systems (e.g., Windows, *nix, VxWorks, QNX, FreeRTOS, Embedded Linux, Windows IoT/Embedded), • Familiarity with embedded hardware design and low-level communication with peripheral devices at the hardware level (e.g., UART, SPI, I2C), • Experience researching hardware platform components and reading schematics and datasheets to understand device functionality, • Experience in reverse engineering of embedded systems containing proprietary operating systems or bare metal applications Benefits: • Mission focused work environment, • Subsidized medical/dental/vision insurance, • HSA contributions, • 401k matching, • Holiday and Paid Time Off (PTO), • Monthly WAN parties & quarterly events, • Flexible hours Remote work is not an option. We do offer relocation assistance. Please see our careers page or inquire with your recruiter about the terms and conditions. Salary and other Compensation: The hourly rate of pay ranges from $43.27 - $96.15 The salary range for this position is subject not only to the hire's skills, education, expertise, and years of experience, but also to features of the final position offered to the hire: including, but not limited to the location of the position, clearance required for the position, and the contract associated with the position. See our Perks & Benefits page for a general description of benefits and other potential compensation benefits: https://www.ciphertechsolutions.com/careers/perks-benefits/ About Us: At Cipher Tech Solutions, Inc. (Cipher Tech), we take great pride in supporting some of the most mission critical work in the Department of Defense and the Intelligence Community. The majority of our company is comprised of extremely talented software developers who write production tools which directly support one of two missions: digital forensics and malware reverse engineering. Digital forensics is the practice of extracting and processing evidence from computers, phones, tablets, cameras, flash-drives, and just about any other form of digital media. The results of our work are then used to support federal and military law enforcement, counterintelligence, and counter terrorist activities. Malware reverse engineering is the practice of analyzing malicious code. The goal of a reverse engineer is to understand how the malicious code works and determine facts such as: How did it infect the victim's computer What kind of information it is seeking to steal How is it communicating with the author (actor) Who that actor might be. Vaccination Notice: Please be aware that you are applying for a position to work as a federal contractor. As such, Cipher Tech will require, and your employment will be subject to, such vaccinations as are required by federal, state, and local law requirements. Important Security Clearance Information: Be aware that you are applying for a job that requires a U.S. Government Security Clearance. If you do not already hold a US government security clearance, we do have the ability to sponsor, however be advised that this can be a multi-year process. The U.S. government will not issue security clearances to recent users of illegal drugs. On your application to us, you must acknowledge that you have not engaged in any illegal drug use within the past twelve months (illegal drug use includes, but is not limited to, the use of illegal substances, the misuse of prescriptions, the misuse of over-the-counter substances, and the use of medical or recreational marijuana that may be deemed legal at the state level but is still considered illegal by the federal government). NOTE: CIPHER TECH WILL NOT DISCRIMINATE AGAINST ANY QUALIFIED APPLICANTS WITH A DISABILITY, INCLUDING ILLEGAL DRUG USERS WHO HAVE RECENTLY SOUGHT PROFESSIONAL TREATMENT FOR A DRUG PROBLEM. -- Cipher Tech is an Equal Opportunity Employer. All hiring and employment decisions are made on the basis of business requirements, performance, and merit with no regard to race, color, religion, sexual orientation, gender, gender identity, national origin, or other protected status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Job Posted by ApplicantPro

Job DescriptionPersonal Injury / Litigation Paralegal for a Personal Injury Firm Tampa, FL Permanent Hire ARC Group is currently seeking a Litigation Paralegal for an established Personal Injury Firm in Tampa, FL. This firm is growing and looking for someone with personal injury litigation to join its team. They offer a competitive salary, excellent benefits, and values a work/life balance. This opportunity requires you to have extensive personal injury litigation experience. • Preparing files for mediation, including a medical billing spreadsheet, tasking the assistant to order updated billing and records, • Acting as a liaison among all parties including a court or other neutrals for scheduling and sharing information, • Organizing and managing documents, including the creation of spreadsheets and retrieval systems, • Coordinating the collection, review, and production of documents and responding to discovery requests, • Assisting with trial preparation including the assembly of exhibits, witness binders, and appendices for depositions and court filings, • Summarizing deposition and trial transcripts and exhibits, • Must be able to schedule depositions, mediation, court deadlines, manage clients, etc., • Monitoring compliance with court-imposed deadlines, especially witness and expert witness lists. Preparing those lists and serving complaints, • Preparing and serving proposals for settlement Qualifications needed for the Paralegal role: • Must have at least 3 years of experience as a Litigation Paralegal, • 3 years personal injury experience including knowledge of personal injury litigation, • Experience with trial preparation, trial execution, and post-trial work, • Knowledge of E-Filing, • Must be proficient with Microsoft Word & Microsoft Outlook, • Must be familiar with the state and federal filing systems. ARC Group is a Forbes-ranked top 20 recruiting and executive search firm working with clients nationwide to recruit the highest quality technical resources. We have achieved this by understanding both our candidate's and clients' needs and goals and serving both with integrity and a shared desire to succeed. ARC Group is proud to be an equal-opportunity workplace dedicated to pursuing and hiring a diverse workforce.

Job Description Description Essential Functions: Use hand tools and operate production equipment to manufacture medical devices and ancillary products. Follow drawings, guidelines and/or diagrams to ensure product specifications and tolerance levels are met. Perform other miscellaneous tasks as assigned. this is considered level 1 position Manufacturing Technician I: $16.50–$17.00/hr Hours: Monday–Friday, 7:00 AM–3:30 PM Skills Assembly, Cleanroom, Production, Medical device, Medical assembly, Hand tool, General labor, Mechanical Top Skills Details Assembly,Cleanroom,Production,Medical device,Medical assembly,Hand tool Additional Skills & Qualifications • Vision - Manufacturing Technicians must be able to distinguish different colors and have vision acuity to perform the essential functions, • Language skills - Manufacturing Technicians must able to read, write, speak, communicate, and follow directions in English., • Dexterity - Manufacturing Technicians should have excellent hand-eye coordination and manual dexterity to grasp, manipulate, or assemble parts and components., • Math skills - Manufacturing Technicians must know basic math, be able to use computers, and perform measurements in both English and Metric units., • Mechanical skills - Modern production systems require assemblers and fabricators to be able to use computers, and robots on the factory floor., • Physical stamina - Manufacturing Technicians must be able to stand and/or sit for long periods (4 hours) and perform repetitious work., • Physical strength - Manufacturing Technicians must be strong enough to lift components tools, equipment and machinery, preferably up to 50 pounds., • Technical skills - Manufacturing Technicians must be able to understand work instructions, blueprints, and schematics for a wide range of components, assemblies, tools, and equipment. Experience Level Entry Level To expedite the hiring process, please send resume directly to email: ascaffido @aerotek.com Job Type & Location This is a Contract position based out of Tampa, FL. Pay and Benefits The pay range for this position is $16.50 - $17.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tampa,FL. Application Deadline This position is anticipated to close on Jun 19, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Why DH Pace? The DH Pace Company is a family-owned and privately held business with annual sales over $1 billion through 60+ offices located across the continental United States. The Company is an industry leader in the distribution, installation, maintenance, and repair of a complete range of commercial, industrial, and residential door, docking and security products. In 2026, DH Pace is celebrating its 100th anniversary in business. DH Pace Company, Inc. is hiring Entry Door Technicians to service a variety of entry doors and door hardware in Tampa, FL and surrounding areas. You must be able to troubleshoot, work without supervision, and have great attention to detail. Valid driver's license required with a good driving record. If you have any experience in construction, as a general laborer, service technician, installer, carpenter, mechanic, assembly worker, or any skilled trade, you may find this opportunity to be a great fit for your career! Job Responsibilities: • Service all products, to include doors and dock equipment cleanly and accurately, • Identify opportunities to provide customers with products and services, • Tracking and maintaining job related paperwork and submitting in a timely manner, • Always operating in safety conscious manner while performing job duties, • Other responsibilities as assigned Job Qualifications: • High school diploma or equivalent preferred, • Able to safely lift 100 pounds over your head, • Commercial door experience and welding experience is a plus but not required, • Must possess valid driver's license and good driving record Experience in construction, as a general laborer, service technician, installer, carpenter, mechanic, assembly worker, or any skilled trade is helpful What We Offer • Comprehensive medical, dental, and vision coverage — available your first full month, • Generous paid time off plus paid holidays and floating holidays, • Company-paid life insurance, short-term disability, and long-term disability, • 401(k) with employer match, • Health Savings Account (HSA) and Flexible Spending Account (FSA) options, • Voluntary benefits including supplemental life and critical illness coverage, • Employee discounts for you and your immediate family, • Competitive compensation with annual performance reviews Successful completion of references, employment verifications, background check, drug screen, and driving record (if applicable) required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job Description Description Essential Functions: Use hand tools and operate production equipment to manufacture medical devices and ancillary products. Follow drawings, guidelines and/or diagrams to ensure product specifications and tolerance levels are met. Perform other miscellaneous tasks as assigned. this is considered level 1 position Manufacturing Technician I: $16.50–$17.00/hr Hours: Monday–Friday, 7:00 AM–3:30 PM Skills Assembly, Cleanroom, Production, Medical device, Medical assembly, Hand tool, General labor, Mechanical Top Skills Details Assembly,Cleanroom,Production,Medical device,Medical assembly,Hand tool Additional Skills & Qualifications • Vision - Manufacturing Technicians must be able to distinguish different colors and have vision acuity to perform the essential functions, • Language skills - Manufacturing Technicians must able to read, write, speak, communicate, and follow directions in English., • Dexterity - Manufacturing Technicians should have excellent hand-eye coordination and manual dexterity to grasp, manipulate, or assemble parts and components., • Math skills - Manufacturing Technicians must know basic math, be able to use computers, and perform measurements in both English and Metric units., • Mechanical skills - Modern production systems require assemblers and fabricators to be able to use computers, and robots on the factory floor., • Physical stamina - Manufacturing Technicians must be able to stand and/or sit for long periods (4 hours) and perform repetitious work., • Physical strength - Manufacturing Technicians must be strong enough to lift components tools, equipment and machinery, preferably up to 50 pounds., • Technical skills - Manufacturing Technicians must be able to understand work instructions, blueprints, and schematics for a wide range of components, assemblies, tools, and equipment. Experience Level Entry Level To expedite the hiring process, please send resume directly to email: ascaffido @aerotek.com Job Type & Location This is a Contract position based out of Tampa, FL. Pay and Benefits The pay range for this position is $16.50 - $17.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tampa,FL. Application Deadline This position is anticipated to close on Jun 19, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: Ice Cream Attendant – Yacht StarShip Manthey Hospitality | Tampa, FL | Part-time Create a Sweet Sea of Memories At Yacht StarShip, we don't just serve food, we create unforgettable experiences. As Tampa Bay's premier dining cruise company, we combine exceptional hospitality, stunning waterfront views, and memorable dining experiences aboard our luxury vessels. We are seeking a friendly, dependable, and detail-oriented Ice Cream Attendant to operate our soft-serve ice cream station and help create a fun and memorable experience for our guests. In addition to serving ice cream, this role is responsible for maintaining, cleaning, and servicing the soft-serve machine to ensure the highest standards of food safety and product quality. Come Aboard! If you enjoy interacting with guests, take pride in cleanliness and presentation, and are looking for a unique hospitality role on the water, we'd love to meet you! What You'll Be Doing • Prepare and serve soft-serve ice cream to guests in a friendly and professional manner., • Create a welcoming and engaging guest experience while maintaining excellent customer service., • Monitor ice cream inventory and notify management of product needs., • Ensure ice cream stations remain fully stocked, clean, and organized throughout service., • Assist guests with questions regarding flavors, toppings, and menu offerings., • Maintain attractive product presentation and serving areas., • Follow all food safety and sanitation procedures. What You'll Be Responsible For • Daily cleaning, sanitizing, and maintenance of the soft-serve machine., • Performing machine assembly, disassembly, and cleaning according to manufacturer specifications., • Monitoring machine performance and reporting maintenance concerns., • Maintaining proper product temperatures and food safety standards., • Ensuring all serving utensils, supplies, and equipment remain clean and organized., • Supporting vessel operations and hospitality teams as needed., • Providing exceptional service that enhances the overall guest experience. What You'll Bring to the Crew • Previous customer service, food service, retail, or hospitality experience preferred., • Friendly and outgoing personality with strong guest service skills., • Ability to work independently and stay organized., • Strong attention to cleanliness and sanitation., • Ability to follow procedures and equipment operating instructions., • Reliable attendance and punctuality., • Ability to work in a fast-paced environment., • Flexible availability, including evenings, weekends, holidays, and special events. Preferred Qualifications • Experience operating food service equipment., • Experience working with soft-serve or frozen dessert machines., • Food Handler Certification preferred or ability to obtain after hire. Physical Requirements • Ability to stand and walk for extended periods., • Ability to lift and carry up to 30 pounds., • Ability to bend, stoop, reach, and perform cleaning duties., • Ability to work aboard a vessel that may be away from dock for several hours at a time., • Ability to work in a sheltered but outdoor environment. Why You'll Love Working Here • Medical, dental, vision, and other insurance benefits available after only 30 days (Full-time employees ONLY)., • Company-matching 401(k) program after 90 days., • Complimentary and discounted cruise tickets., • Opportunities for growth and advancement throughout Manthey Hospitality., • A fun, guest-focused work environment., • A unique workplace where every day offers a different view. Join the Crew At Yacht StarShip, we're more than a restaurant—we're an experience. If you're ready to deliver exceptional guest service and help create sweet memories on the water, we'd love to hear from you. Apply today and join the Yacht StarShip crew! Equal Opportunity Statement Manthey Hospitality is an Equal Opportunity Employer and does not discriminate based on any protected characteristic under federal, state, or local law. This job posting is a condensed summary of the role and not a full job description. A complete description will be reviewed during the interview process. Responsibilities and duties may change based on business needs and may include additional tasks not listed above. Requirements:

Job Description Why DH Pace? The DH Pace Company is a family-owned and privately held business with annual sales over $1 billion through 60+ offices located across the continental United States. The Company is an industry leader in the distribution, installation, maintenance, and repair of a complete range of commercial, industrial, and residential door, docking and security products. In 2026, DH Pace is celebrating its 100th anniversary in business. HIRING BONUS! $2,500 WITH VERIFIABLE INDUSTRY EXPERIENCE AS RESIDENTIAL GARAGE TECHNICIAN! DH Pace Company, Inc. located in Tampa, FL is hiring Experienced Residential Garage Door Technicians! We are hiring both experienced technicians and trainees! Candidates must be able to safely lift 100 lbs. Valid driver's license required with a good driving record. If you have any experience in construction, as a general laborer, service technician, installer, carpenter, mechanic, assembly worker, or any skilled trade, you may find this opportunity to be a great fit for your career! Job Responsibilities: • Service/repair residential garage doors and door hardware - must have experience as either an installer or technician in the Residential Garage door space., • Identify opportunities to provide customers with products and services, • Always operate in safety conscious manner while performing job duties, • Other responsibilities as assigned Job Qualifications: • High school diploma or equivalent preferred, • Must be able to safely lift 100 pounds, • Valid driver's license and good driving record required What We Offer • Comprehensive medical, dental, and vision coverage — available your first full month, • Generous paid time off plus paid holidays and floating holidays, • Company-paid life insurance, short-term disability, and long-term disability, • 401(k) with employer match, • Health Savings Account (HSA) and Flexible Spending Account (FSA) options, • Voluntary benefits including supplemental life and critical illness coverage, • Employee discounts for you and your immediate family, • Competitive compensation with annual performance reviews Successful completion of references, employment verifications, background check, drug screen, and driving record (if applicable) required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job Description Job Overview An Aircraft Integration Technician 2 is responsible for assisting with the installation, integration, and testing of avionics systems and components in aircraft. They work closely with engineers and other technicians to ensure that all systems are properly installed and functioning correctly. Essential Functions • Assist with installation and checkout of UAV electrical and electronic devices, • Utilize hand and power tools during assembly and fabrication, • Assist with utilizing multimeters and probes to conduct troubleshooting and diagnostics on equipment wiring., • Assist with cable assembly and repairs, • Provide support working on integration, fuselage/airframe, and programming portions of the UAV., • Assist with assembling components including switches, electrical controls, and junction boxes, • Provide support working on integration, fuselage/airframe, and programming sections of the UAV., • Follow work instructions and/or peer guidance on proper assembly, • Performs other related duties as assigned Standard Essential Functions • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • Proficient understanding of fundamental skills such as soldering, crimping, tool use, and frame assembly., • Proficient avionics and mechanical integration skill, • Ability to follow guidance on tasks and work requirements, • Ability to read and understand prints and layouts, or learn if not experienced., • Proficient verbal and written communication skills, • Ability to work efficiently with team members, independently, and cross-functionally., • Ability to meet daily/weekly production goals with critical time schedules Education / Certifications • High school diploma or equivalent required. Experience • 3-6 Years of experience in a production and/or assembly environment, • Proven knowledge of competencies for skill level can be used in lieu of experience., • Proven experience working on integration, fuselage/airframe, and programing portions of a UAV or similar aircraft. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to stand for extended periods of time, • Frequently required to lift up to 15 pounds, • Frequently required repetitive movements of wrists, hands, and/or fingers For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance • Ability to obtain/maintain a Secret DoD clearance, U.S. Citizenship required. Disclaimer: AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

We're currently looking for individuals across the country to take part in remote paid research, including remote focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing your opi

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Costco is seeking Customer Service Associates to assist members with purchases, returns, and front-end store operations.Customer Service Associates are responsible for greeting members, operating cash registers, processing payments, assisting with returns and exchanges, checking receipts at the exit

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

ALDI is seeking Customer Service Associates to work as Cashiers and Stockers supporting daily store operations in a fast-paced grocery store environment.Associates are responsible for operating the cash register, assisting customers, stocking shelves, unloading deliveries, organizing merchandise, cl

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Sam’s Club is seeking Member Frontline Cashiers to assist members with purchases, operate registers, and provide customer service at the front end of the store.Frontline Cashiers are responsible for scanning merchandise, processing cash and card payments, verifying memberships, assisting members w

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Walmart is seeking Cashiers / Front End Associates to assist customers with purchases, operate registers, and support front-end store operations.Front End Associates are responsible for scanning items, processing cash and card payments, handling returns and exchanges, bagging items, assisting custom

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Full-time employees may be eligible for benefits including medical, dental, and vision insurance, 401(k) with company match, pension benefits in some locations, paid time off, paid holidays, company-provided uniforms, and employee discount programs.

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Amazon Flex Delivery Drivers use their own vehicle to deliver Amazon packages to customers on scheduled delivery blocks.Drivers are responsible for picking up packages from an Amazon delivery station, loading packages into their personal vehicle, following delivery routes using the Amazon Flex app,

Goodwill is seeking Store Clerks / Cashiers to assist with retail store operations, customer service, and processing sales transactions.Store Clerks are responsible for operating the cash register, handling cash and card payments, assisting customers with purchases, answering questions, stocking she