Medical assembly jobs in New York, New YorkCreate job alerts

Job Description Quest International | Field Service Engineer I – New York, New Jersey & Pennsylvania Pay: $20.00–$29.00 per hour, depending on experience and qualifications, plus applicable overtime Employment Type: Full-Time, Temp-to-Hire Location: Field-Based – New York, New Jersey & Pennsylvania Service Territory Travel: Up to 80%, including overnight assignments Start Date: ASAP Build Your Career in Technical Field Service Quest International, Inc. is seeking a Field Service Engineer I to install, maintain, troubleshoot, and repair medical and industrial equipment at customer locations throughout the assigned service territory. You do not need previous biomedical equipment experience to qualify. If you have hands-on experience repairing electronics, industrial equipment, or electro-mechanical systems, we encourage you to apply. We also welcome candidates with relevant military technical training in electronics, avionics, or equipment maintenance. Quest provides equipment-specific technical training to help qualified technicians develop the skills needed to service assigned customer equipment. What You'll Do Install, inspect, maintain, troubleshoot, and repair medical, electronic, and electro-mechanical equipment at customer sites. Perform preventive maintenance, corrective repairs, and functional testing. Diagnose electrical and mechanical failures using digital multimeters, wiring diagrams, schematics, and service manuals. Troubleshoot equipment to the Field Replaceable Unit (FRU), module, assembly, or component level. Identify and repair problems involving wiring harnesses, sensors, power supplies, motors, and sensitive electronic components. Replace defective boards, modules, wiring assemblies, and other serviceable parts. Verify equipment operation according to manufacturer specifications. Maintain accurate electronic work orders, service reports, and repair documentation. Communicate professionally with customers and coordinate with Quest's technical support and dispatch teams. Required Qualifications High school diploma or equivalent. At least one year of relevant hands-on equipment repair, electronics, electrical, electro-mechanical maintenance, or field-service experience. Demonstrated ability to troubleshoot electronic, electrical, or electro-mechanical equipment. Experience using a digital multimeter or comparable diagnostic equipment. Familiarity with schematics, wiring diagrams, service manuals, and technical instructions. Ability to diagnose equipment failures and replace defective components. Basic computer skills, including Windows, Microsoft Office, and electronic service documentation. Strong problem-solving, communication, and customer-service skills. Ability to work independently at customer locations with appropriate technical support. Preferred Qualifications The following experience is helpful but not required: Biomedical equipment repair or medical device service. Industrial electronics, automation, or electro-mechanical maintenance. Optical equipment or electronic instrumentation. Original Equipment Manufacturer (OEM) equipment service. Military electronics, avionics, or electro-mechanical training. Associate degree or technical certificate in electronics or a related field. Experience with frequency counters, vacuum/pressure meters, or other service instruments. Familiarity with command-line tools or PowerShell. Travel and Transportation Requirements This is a field-based position, not a work-from-home position. Must reside within the approved service territory or have confirmed relocation arrangements before employment begins. Must possess a valid driver's license and acceptable driving record. Must have a reliable personal vehicle and appropriate automobile insurance. Must be willing to travel up to 80%, including overnight assignments. Must be available for occasional nonstandard work hours and changing customer schedules. Must be able to perform the essential functions of the position, with or without reasonable accommodation. Must be willing to complete applicable pre-employment requirements, including Quest's required Human Performance Test. Why Join Quest International? $20.00–$29.00 per hour DOE, plus applicable overtime. Equipment-specific technical training. Opportunities to develop skills in medical and industrial equipment service. Professional development and potential career advancement. Hands-on technical work supporting a variety of customer equipment. Employee Benefits Eligible employees may participate in Quest International's benefit programs, which may include: Medical, dental, and vision insurance. Life insurance and accidental death and dismemberment coverage. Short-term and long-term disability insurance. Healthcare and dependent-care flexible spending accounts. Voluntary supplemental insurance programs. All benefits are subject to applicable eligibility requirements, employment classification, plan provisions, enrollment periods, coverage dates, and employee contributions. Benefit eligibility during the temporary-to-hire period depends on the applicable employer's plans. About Quest International For more than 40 years, Quest International, Inc. has provided technical service, equipment repair, maintenance, logistics, and support solutions to healthcare organizations, medical equipment manufacturers, and technology companies. Our Field Service team helps customers maintain reliable equipment through installation, preventive maintenance, troubleshooting, and corrective repairs. Apply Today If you enjoy diagnosing technical problems, repairing equipment, and working independently in the field, we encourage you to apply. Biomedical experience is not required when you have relevant hands-on technical repair experience. Join Quest International and put your technical skills to work. Quest International, Inc. www.questinc.com Quest International is an Equal Opportunity Employer.

Job Description Join ProMach and shine. Whether you're creative, strategic, persuasive, or mechanically inclined, there’s a place for you here. Be a problem-solver, a closer, a futurist - whatever drives you. At ProMach, you'll be challenged and rewarded as you help improve packaging performance and shape the future of automation. And we’ll be proud to have you on the journey. Do we have your attention? Keep reading. ProMach's Brenton is currently seeking a Field Service Technician to provide non-supervised professional service and training support for Brenton Engineering customers; assuring our product always conforms to requirements. This position can be located within 1 hour of a major airport and reports to our Field Service Manager. Are you motivated about this work? Direct and Assist customer personnel in the installation, start-up and training of Brenton machines and systems Provide technical service support to customers when their machines are not performing Provide Engineering Department with accurate updates on all changes made to machines in the field Be an integral part of the team for final checkout of machines assuring they are ready for shipment Be technically competent, Mechanically and Electrically, with the ability to move through and edit PLC and HMI programs easily Fluent in setup and operations of all three Brenton Product Lines (Case packers, Shrink Wrappers, and Fanuc Robots and Controllers) If this sounds like you, we want to connect! Be technically competent, mechanically and electrical assembly and troubleshooting skills. Ability to work online with Rockwell PLC's and HMI's, navigate and make edits/changes to PLC and HMI programs. Fanuc Robot experience and certification highly desirable with 2-4 years of field experience. Professional communication, attitude and image. Educator - good verbal and written presentation - organized - good planner, good interpersonal skills. Ability to work independently and as a team in a fast-paced production environment. Team player with coaching, interpersonal and technical skills. Be technically competent, mechanically and electrical assembly and troubleshooting skills. What’s in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. Total compensation includes your salary, comprehensive medical/dental programs, as well as life insurance, a generous paid time off program, and a retirement savings plan with a company match. And because we understand the importance of feeling protected, there is no waiting period for benefits – you are eligible on your first day of employment! Please note that the pay ranges listed on external job boards, outside our posting details, do not accurately reflect our internal compensation ranges. Pro Mach, Inc. was named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strength of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally, with the personal touch and feel of a smaller company where you can make an impact every day. ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Base Hourly Range: $27.00 - $50.00 #BRENT #INBRE #ZRBRE

Job Description About Bell and Howell Bell and Howell delivers technology-driven Automation Services and Automation Solutions that help businesses optimize performance, reduce downtime, and improve customer experiences. Our Automation Services bring a dedicated team of expert mechatronic service engineers completely covering North America and backed by our Integrated 360™ advanced technology enabling remote repair, diagnostics, automated SmartOps Dispatch™ and 24/7/365 technical assistance for our clients. We provide a comprehensive and certified level of support for thousands of diversified clients. Our Automated Solutions product portfolio consists of next-generation equipment delivering best-in-class performance enhancing workflow efficiency and elevating customer experiences across multiple markets including retail, pharmaceuticals, packaging, mail production, ecommerce and manufacturing – all backed by the best service in the industry. Location: NYC/Brooklyn/Queens & Long Island Areas Hourly Range: 23-30/hr. Summary: The Field Customer Service Engineer serves as primary customer contact on technical and service-related problems on a wide range of industrial, robotic and printing equipment. Diagnoses electronic, mechanical, software and system failures, using established procedures provided by our highly rated service training department. This job may include any aspect of field support, including electrical/electronics, hardware, software, PC’s, and networking. Provides technical support to customers on operational or maintenance aspects of system equipment. Determines most cost-effective repair/resolution to minimize customer downtime. Note: This is not an IT role. The position requires hands-on electrical and mechanical troubleshooting with experience using Digital Multi Meter (DMM) and more. Duties and Responsibilities: • Primary responsibility will be to install, troubleshoot and repair a variety of industrial products that include, but are not limited to; printing and packaging equipment, cash recycling products, inserting and sorting machines, credit card attaching and processing systems, robotics and any other applicable third-party accessories attached as part of the system., • Schedule and perform regular predictive/preventive maintenance inspections on equipment., • Provide support by managing parts inventory, customer service calls and preventative maintenance schedules., • Foster positive customer relations and a high degree of customer satisfaction by communicating effectively with customers., • Act as a liaison between the customer and other departments/functions of the company., • May need to provide an “on call” level of service up to seven (7) day/week twenty-four (24) hour/day for emergency customer assistance; respond to emergency and non-scheduled calls for service within established response time goals. Supervisory Responsibilities: N/A Competencies (Skills, Knowledge and Abilities): • Requires understanding of computer program functionality and software troubleshooting skills., • Strong interpersonal/customer relation skills., • Ability to build and maintain strong customer relationships by understanding their operations and instilling confidence with effective proactive communication., • Ability to effectively resolve conflict internally and externally., • Ability to accomplish the describe duties through appropriate hand, power, and testing tools/equipment., • Ability to reason logically and make sound decisions along with considering alternative and diverse perspectives., • Strong analytical, problem-solving, quantitative, and time management skills., • Ability to communicate effectively both orally and in writing., • Ability to understand, remember and follow verbal and written instructions., • Ability to work as an integral part of a team., • Ability to read and understand written procedures and diagrams for assembly and test., • Ability to develop and implement solutions to assembly problem., • Ability to maintain regular attendance and be punctual. Education and Experience: • High School degree or equivalent with 2-year degree or diploma in electronics/advanced mechanics/software training with 1+ years related industry/equipment experience, or equivalent combination of education and experience., • Requires strong electronics and mechanical background, understanding of computer program functionality and software troubleshooting skills, • Associate degree preferred. Travel: This position requires minimal travel in the United States and Canada for training and other requirements. For field only, local travel time could be greater than 50%. Physical Requirements: • Ability to use standard and specialized hand, power and diagnostic tools and measuring equipment, such as oscilloscopes, DMM, gauges, etc., • Requires lifting to waist seventy (70) pounds., • Requires walking and standing; using hands to feel objects; reaching; and requires balance., • Requires bending, stooping, kneeling, crouching and/or crawling for periods of time., • Ability to work in a loud environment., • Ability to work in small, cramped areas., • Ability to work in elevated environment up to twenty (20) feet., • Work is performed in a controlled office, retail, and manufacturing environment; noise within acceptable safety levels; paper dust prevalent; cleaners and solvents used to clean machines; machines contain moving parts. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Bell and Howell is an Equal Opportunity Employer. It is company policy to administer employment based solely on an individual’s qualifications, ability and performance without regard to race, color, religion, gender identity, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation, age, national origin or ancestry, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status, marital status, or any other characteristic protected by federal, state or local law.

Job Description About Bell and Howell Bell and Howell delivers technology-driven Automation Services and Automation Solutions that help businesses optimize performance, reduce downtime, and improve customer experiences. Our Automation Services bring a dedicated team of expert mechatronic service engineers completely covering North America and backed by our Integrated 360™ advanced technology enabling remote repair, diagnostics, automated SmartOps Dispatch™ and 24/7/365 technical assistance for our clients. We provide a comprehensive and certified level of support for thousands of diversified clients. Our Automated Solutions product portfolio consists of next-generation equipment delivering best-in-class performance enhancing workflow efficiency and elevating customer experiences across multiple markets including retail, pharmaceuticals, packaging, mail production, ecommerce and manufacturing – all backed by the best service in the industry. Location: Tristate area from NYC to end of Long Island Pay: 25/hr Saturday and Sunday's Only (first shift) Job Summary: Associate Customer Service Technician serves as primary customer contact on technical and service related problems on a wide range of industrial, robotic and printing equipment. Diagnoses electronic, mechanical, software and system failures, using established procedures provided by our highly rated service training department. This job may include any aspect of field support, including hardware, software, PC's, and wireless networking. Provides technical support to customers on operational or maintenance aspects of system equipment. Determines most cost-effective repair/resolution to minimize customer downtime. Note: This is not an IT role. The position requires hands-on electrical and mechanical troubleshooting with experience using Digital Multi Meter (DMM) and more. Job Responsibilities: • Primary responsibility will be to troubleshoot and repair a variety of industrial products that include, but are not limited to; printing equipment, cash recycling products, mailing and sorting machines, credit card embossing, and processing and any other applicable third-party accessories attached as part of the system., • Schedule and perform regular predictive/preventive maintenance inspections on equipment., • Provide support by managing parts inventory, customer service calls and preventative maintenance schedules., • Foster positive customer relations and a high degree of customer satisfaction by communicating effectively with customers., • Act as a liaison between the customer and other departments/functions of the company., • May need to provide an "on call" level of service up to seven (7) day/week twenty-four (24) hour/day for emergency customer assistance; respond to emergency and non-scheduled calls for service within established response time goals. Supervisory Responsibilities: N/A Competencies (Skills, Knowledge and Abilities): • Requires understanding of computer program functionality and software troubleshooting skills., • Strong interpersonal/customer relation skills., • Ability to effectively resolve conflict internally and externally., • Ability to accomplish the describe duties through appropriate hand, power, and testing tools/equipment., • Ability to reason logically and make sound decisions along with considering alternative and diverse perspectives., • Strong analytical, problem-solving, quantitative, and time management skills., • Ability to communicate effectively both orally and in writing., • Ability to understand, remember and follow verbal and written instructions., • Ability to work as an integral part of a team., • Ability to read and understand written procedures and diagrams for assembly and test., • Ability to develop and implement solutions to assembly problem., • Ability to maintain regular attendance and be punctual. Education and Experience: • High School degree or equivalent., • Degree in electronics, advanced mechanics and/or software training with 1+ year related industry/equipment experience or equivalent combination of education and experience., • Associate degree preferred. Travel: This position requires some travel in the United States and Canada. Physical Requirements: • Ability to use standard and specialized hand, power and diagnostic tools and measuring equipment, such as oscilloscopes, DMM, gauges, etc., • Requires lifting to seventy (70) pounds., • Requires walking and standing; using hands to feel objects; reaching; and requires balance., • Requires stooping, kneeling, crouching and/or crawling., • Ability to work in a loud environment., • Ability to work in small, cramped areas., • Ability to work in elevated environment up to twenty (20) feet., • Work is performed in a controlled office, retail, and manufacturing environment; noise within acceptable safety levels; paper dust prevalent; cleaners and solvents used to clean machines; machines contain moving parts. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The Company is an Equal Opportunity Employer. It is the policy of the Company to administer employment based solely on an individual’s qualifications, ability and performance without regard to race, color, religion, gender identity, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation, age, national origin or ancestry, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status, marital status, or any other characteristic protected by federal, state or local law.

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. Demonstrating a willingness to help others and be a team member Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company. Provide voice of Customer feedback. Through service and Customer relationships, build brand dedication. Conduct travel and work in a safe manner, constantly learning new technology and soft skills. Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues. Effectively understand and use the Salesforce Lightning Customer Support computer system. Qualifications & Competencies: Proficient verbal and written communication and Customer relation skills. Able to interact and effectively communicate in person and over the phone with customer and co-workers. Present a professional image. Must be adaptable to changes and able to deal with change, delays, or general work-related issues. Basic digital literacy and shown understanding of MS Word, Excel, and Outlook. Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus. Basic mechanical and logical solving skills are a must. Rational decision making and problem-solving skills. Work Environment Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: Perform related duties as required The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. What’s in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance 3+ Weeks’ Vacation to Start 10 Company Paid Holidays 401(k) retirement plan with company contribution Tuition reimbursement Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Must be highly mobile, able to access all areas of the premises. Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. Ability to sit for prolonged period of times. Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. Ability to frequently use hands and arms. Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated as safety-sensitive due to the nature of the work performed. Employees in these roles may also be expected to: Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment. Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas. Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work. Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1438B, Brooklyn NY

Job DescriptionDescription: Bring fitness equipment to life for our customers At Johnson Health Tech Retail, our goal is simple: deliver innovative fitness products, exceptional quality, and a customer experience that leaves a lasting impression. As a Delivery & Installation Technician, you’ll be one of the final and most important touchpoints in the customer experience — delivering, assembling, and setting up equipment safely, professionally, and with care. This is a hands-on role for someone who enjoys being on the move, working with tools, solving problems, and making sure every customer feels confident and excited about their new equipment. How You’ll Make an Impact In this role, you’ll help make sure products are delivered, installed, and ready to use. Responsibilities include: • Load delivery trucks and verify products are accurate before leaving the warehouse., • Deliver fitness equipment to customers’ homes, facilities, events, model homes, fairs, and other locations., • Assemble products safely, correctly, and efficiently so they are ready for customer use., • Test equipment with customers to confirm everything is working properly., • Complete daily vehicle inspections and follow all safety policies and procedures., • Maintain a clean, safe, and organized work environment using 5S standards., • Complete paperwork and database entries accurately and on time., • Safeguard company-issued fuel cards and credit cards., • Build positive working relationships with customers, coworkers, vendors, and internal teams., • Support other projects and responsibilities as assigned.Requirements: What We’re Looking For The ideal candidate is dependable, safety-minded, customer-focused, and comfortable with hands-on work. You’ll be successful in this role if you bring: • A high school diploma or equivalent., • 1–2 years of delivery, assembly, installation, warehouse, or customer service experience preferred., • A valid driver’s license., • The ability to successfully pass pre-employment and annual motor vehicle record checks., • The ability to complete DOT certification to drive on behalf of the company., • The ability to maintain a safe driving record and DOT medical card., • Must be at least 21 years old to drive company trucks interstate., • Basic computer skills., • Comfort using hand tools such as screwdrivers, wrenches, and drills., • A professional, positive, and customer-friendly approach. Physical Requirements & Work Environment: This is an active, hands-on role that takes place primarily on the road and in customers’ homes or facilities, with some time spent in the warehouse. The warehouse environment may include employees and equipment working in close proximity. Physical requirements include: • Frequently: lifting/carrying products up to 74 lbs.; pushing/pulling items up to 40 lbs.; repetitive wrist motion; grasping/pinching; bending at the knees and waist; twisting, turning, and pivoting., • Occasionally: lifting/carrying products 75–100+ lbs.; assisting with team lifts of products up to 400 lbs.; pushing/pulling items over 40 lbs.; reaching overhead or outward., • Regularly: sitting in a work truck for extended periods while traveling to job sites, standing/walking while on-site, wearing safety shoes with impact protection, and using proper lifting and team-lift techniques. Why Join Johnson Health Tech? You’ll be part of a team that helps customers bring fitness into their homes, businesses, and communities. This role is perfect for someone who likes variety, takes pride in quality work, and enjoys creating a positive final impression for customers. Benefits & Perks • Competitive benefits program for eligible employees, including medical, dental, and vision insurance., • Company-paid life insurance and AD&D for eligible employees., • Flexible Spending Account and Health Savings Account options, depending on plan eligibility., • 401(k) retirement plan options for eligible employees., • Employee product discount, wellness resources, and additional employee support programs. Equal Opportunity Employer, including Protected Veterans and Individuals with Disabilities.

Job Description At Boston Retail Solutions, we bring brand visions to life—and we have fun doing it! As nationwide leaders in modular barricades and graphics, we collaborate closely with our clients through every step of the process to ensure flawless execution, ON BRAND and ON TIME. But what truly sets us apart is our team. We live by our Core Values: keep your word, care deeply for your teammates, and do it right the first time. We treat our customers, our colleagues, and ourselves with respect, and we're always looking for great people to grow with us. We are currently seeking Overnight Installers at our East Rutherford, NJ location. Role: Overnight Installers are accountable for the execution of a finished assembly of temporary store construction enclosures and graphics packages. This role is responsible for installation of modular construction barricades panels, non-electrical retail signs, and hanging store fixtures or graphics with precision and care, ensuring that Boston Retail Solutions customers receive a high level of quality, service, and professionalism. Responsibilities: • Installation of modular storefront construction barricades at various locations throughout a defined territory, • Installation of large format graphics (training provided), • Maintain company provided tools, • Accurately report project information at time of completion, • Drives to and from job sites in BRS fleet vehicles while maintaining a clean and organized truck, • Responsible for maintaining a good working order for all BRS provided tools, equipment and apparel, • Follows appropriate safety guidelines and wear personal protection equipment as needed per jobsite requirements, • Ensures on-site, off-site behavior is professional while respecting traditional courtesy and good manners Qualifications and Education Requirements: • Working knowledge of power tools., • Experienced in field-based installations, • Familiarity with common hand tools, • Physical ability to climb and work on ladders., • Knowledge of scissor lift and man lifts preferable, • Physical ability to lift and carry up to 80 pounds., • Valid driver's license with a good driving record is necessary., • 2+ years of construction or carpentry related experience is helpful., • Availability to work overtime as needed, • Occasional travel within a defined territory, • This position requires you to operate a vehicle with a gross vehicle weight of up to 26,000 lbs. and is subject to U.S. Department of Transportation (DOT) regulations. As such, you will be required to successfully complete and maintain a valid DOT Medical Examiner’s Certificate (DOT Physical). Employment in this role is contingent upon meeting these physical and medical standards; failure to obtain and maintain a valid DOT certification will result in immediate separation from employment with Boston Retail Solutions. THIS JOB DESCRIPTION IS NOT INTENDED TO BE ALL-INCLUSIVE. EMPLOYEE MAY PERFORM OTHER RELATED DUTIES AS NEGOTIATED TO MEET THE ONGOING NEEDS OF THE ORGANIZATION. Please Note: this position has been designated as safety-sensitive because its duties involve responsibilities where impairment from drugs or alcohol could reasonably result in a significant risk of harm to the employee, coworkers, customers, or the public. Duties may include operating commercial motor vehicles, heavy equipment, machinery, or performing other tasks in which impairment presents an unacceptable safety risk. Employees in this position are subject to pre-employment and other drug/alcohol testing conducted in accordance with applicable federal and state law. Employees are eligible for: • Numerous insurance options, including Health, Dental and Vision Coverage, • Matching 401k plan, • Paid Time Off and Paid Holidays, • Employee Stock Ownership Plan (ESOP) We are proud to be an Employee-Owned Company

Job DescriptionMachine Operator Lead Zing Recruiting is partnering with a leading manufacturer in Rahway, NJ to hire a Machine Operator Lead. This contract-to-hire opportunity is ideal for someone with machine operation experience who has led a small assembly or production team and is ready to grow into a larger leadership role. Pay: $23-$25/hr Schedule: Monday-Thursday, 7:30 AM-6:00 PM Responsibilities • Lead and support a small assembly/production team, • Operate and monitor manufacturing equipment, • Train and assist team members on processes and procedures, • Troubleshoot basic machine issues and escalate as needed, • Ensure safety, quality, and production goals are met, • Maintain a clean and organized work areaWhat We're Looking For, • 2+ years of machine operation experience, • Experience leading, training, or mentoring a small team, • Strong mechanical aptitude and problem-solving skills, • Basic computer skills, • Desire to grow into a leadership positionWhy Zing?, • Medical, Dental, Vision & Life Insurance, • 401(k) eligibility, • Weekly pay and direct deposit, • Contract-to-hire opportunity with long-term growth potentialEqual Employment Opportunity Statement Zing Recruiting is an Equal Opportunity Employer. We are committed to creating an inclusive workplace and consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, age, or any other protected characteristic under applicable federal, state, or local laws. #ZINGZIP #ZINGNJHV \nCompany Description Zing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client. Zing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client.

Job DescriptionForeman Organization: Hayes Pump, Inc. Location: Fairfield, NJ FLSA Status: Non-Exempt Pay Range: $40.00 - $50.00 per hour Position Summary Hayes Pump, the largest industrial, commercial, and municipal pump distributor in the Northeast, is seeking a Foreman to lead our growing New Jersey service operation. This position combines technical pump expertise with leadership responsibilities, overseeing daily service operations, coordinating technician schedules, supporting customers, and ensuring high-quality repair and maintenance services. The ideal candidate is an experienced pump mechanic who is ready to take the next step into leadership while remaining actively involved in service operations and technical problem-solving. Benefits Competitive hourly pay Overtime opportunities Company vehicle (if applicable) Factory and manufacturer training Career advancement opportunities Team-oriented work environment Industry-leading products and technical support Comprehensive benefits package Key Responsibilities Supervise and support service technicians and shop personnel. Coordinate daily schedules, work assignments, and service priorities. Serve as the primary technical resource for pump repair and troubleshooting activities. Oversee shop operations and field service activities to ensure quality, efficiency, and safety. Assist with recruiting, interviewing, onboarding, and developing service team members. Participate in hiring decisions and support department growth initiatives. Prepare service packages, work orders, and documentation using company systems and CRM tools. Communicate with customers regarding service needs, repair recommendations, and project updates. Support field service technicians with technical guidance and troubleshooting assistance. Monitor workflow, productivity, and service quality standards. Participate in hands-on repair, maintenance, and rebuild activities as needed. Promote a culture of safety, accountability, and continuous improvement. Ensure all work is completed in accordance with company policies and customer expectations. Required Qualifications Minimum 5 years of pump repair and service experience. Strong knowledge of centrifugal, split-case, and end suction pumps. Proven ability to diagnose and troubleshoot complex pump systems. Experience coordinating work schedules and service activities. Strong customer service and communication skills. Ability to lead, mentor, and support technicians. Experience working independently and making sound operational decisions. Proficiency with computers, service documentation, and CRM systems. Valid driver's license with an acceptable driving record. Ability to obtain a DOT Medical Card. Preferred Qualifications Previous experience as a Lead Technician, Foreman, Supervisor, or Service Manager. Experience working with municipal, industrial, and commercial pumping systems. Experience managing technicians, schedules, and customer expectations. Knowledge of pump manufacturers including Goulds, Xylem, Gorman-Rupp, Fairbanks Morse, Grundfos, Viking, Aurora, or similar products. Knowledge of electrical controls and motor troubleshooting. OSHA 10 certification. Technical or trade school education in a mechanical field. Team Structure Initially supervises approximately 3 employees. Will oversee two newly hired Service Repair Mechanics. Expected to manage 4–5 employees as the department continues to grow. May assist in overseeing future assembly and service operations as responsibilities expand. Schedule & Travel Typical schedule: 7:00 AM – 3:30 PM. Based in Fairfield, NJ. Travel to customer locations and field sites as needed. Travel may increase as service operations continue to expand. Overnight travel may occasionally be required. Travel time is compensated in accordance with company policies. What Makes Someone Successful Successful Foremen are: Highly skilled pump mechanics who lead by example. Strong communicators who build trust with employees and customers. Organized professionals who can effectively balance technical work, scheduling, and leadership responsibilities. Customer-focused and responsive to service needs. Comfortable making decisions and solving problems independently. Committed to safety, quality workmanship, and continuous improvement. Why Join Hayes Pump? Hayes Pump is the Northeast's largest industrial, commercial, and municipal pump distributor. Joining our team means becoming part of an organization known for technical expertise, exceptional customer service, and long-term employee growth. This is an excellent opportunity for an experienced technician looking to advance into a leadership role and help shape the future of a growing service operation.

Job Description • We are hiring immediately for full time WAREHOUSE ATTENDANT positions., • Location: Corporate Essentials - 2 Cranberry Road Unit #2, Parsippany, NJ 07054. Note: online applications accepted only., • Schedule: Full time schedule. Monday through Friday, hours may vary. Further details upon interview., • Requirement: Previous experience preferred., • Pay Range: $18.00 per hour to $20.00 per hour. *Internal Employee Referral Bonus Available The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Summary: Receives, stores and distributes material, tools, equipment and products. Essential Duties and Responsibilities: • Reads production schedule, customer order, work order, shipping order or requisition to determine items to be moved, gathered or distributed., • Conveys materials from receiving or production areas to storage or other designated areas., • Places materials/goods on racks, shelves and bins or in refrigerated rooms according to predetermined sequence such as size, type, style, color or product code., • Fills requisitions, work orders or requests for materials, tools or other stock items and distributes items to production workers or assembly line., • Assembles customer orders from stock and places orders on pallets or shelves; conveys orders to packing station or shipping department., • Marks materials with identifying information., • Opens bales, crates and other containers., • Records amounts of materials or items received or distributed., • Weighs or counts items for distribution within plant to ensure conformance to company standards., • Arranges stock parts in specified sequence for assembly by other workers., • Uses computer to enter records., • Compiles worksheets or tickets from customer specifications., • Drives vehicle to transport stored items or to pick up items., • Completes requisition forms to order supplies from other plant departments., • Prepares parcels for mailing., • Maintains inventory records., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables., • The use of slip-resistant shoes and proper lifting techniques. Associates at Canteen are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyCanteen.pdf About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. Req ID:1554686 Canteen

Job DescriptionBenefits: • Free uniforms, • Health insurance, • Vision insurance About Savory Savory is a boutique hospitality partner delivering chef-driven food experiences for workplaces, events, and venues. From corporate catering and conferences to social gatherings and high-end galas, we offer everything from boxed meals and buffets to elevated receptions, global menus, and fresh grab & go. Built for quality, flexibility, and seamless execution, Savory has consistently delivered exceptional food and hospitality since 2011. About the role We are seeking a dependable and hospitality-focused Culinary Attendant to join the Savory team at one of our onsite business dining spaces. This role is ideal for someone with prior kitchen or food service experience who understands food safety, cleanliness, and high-quality presentation standards. This position does not involve full cooking responsibilities, as food is delivered fully prepared. The Culinary Attendant will reheat and hold prepared food using approved equipment, prepare smoothies and beverages, complete light food assembly, stock service stations, and maintain safe food-handling practices in accordance with Department of Health and Savory standards. Our business dining experiences offer team members the opportunity to work alongside the Savory team while interacting directly with our onsite client and guests on a day-to-day basis. Key Responsibilities Food Preparation and Service • Reheat, hold, and present prepared food according to Savory standards., • Prepare smoothies, beverages, and light food items., • Monitor food temperatures and follow safe food-handling procedures., • Provide professional and hospitable service to clients and guests.Station and Inventory Support, • Set up, stock, replenish, and organize food and beverage stations., • Complete opening and closing procedures., • Organize inventory and communicate restocking needs., • Support daily service operations and additional team needs.Cleanliness and Food Safety, • Maintain clean, sanitized, and organized work areas., • Clean equipment, utensils, and service stations., • Follow Department of Health and Savory sanitation standards.Team Collaboration, • Work closely with onsite culinary and hospitality teams., • Communicate clearly and contribute to smooth daily operations., • Represent the Savory brand professionally.Job Requirements Experience and Skills • Previous food service, catering, hospitality, or kitchen experience preferred., • Basic knowledge of food safety, temperature control, food holding, and sanitation., • Strong organization, time management, and attention to detail., • Ability to work efficiently in a fast-paced environment., • Professional communication skills and a team-oriented attitude., • Comfort working in a client-facing corporate dining environment., • Basic understanding of spoken and written English., • Basic proficiency with Microsoft Office and Microsoft Teams preferred., • Department of Health Food Protection Certificate preferred.Schedule and Physical Requirements, • Ability to stand for prolonged periods in varying temperature conditions., • Ability to lift up to 50 pounds and repeatedly lift up to 25 pounds., • Availability to work a flexible daytime schedule Monday through Friday, with occasional nights, weekends, or holidays. Why Join Us, • Competitive hourly rate of $20.00-$23.00, • Medical, dental, and vision insurance, • Paid time off (PTO), • 401(k), • Flexible Spending Account (FSA) and transit benefits, • Cell phone reimbursement, • Positive, growth-focused work environment Savory is committed to fostering an inclusive, equitable workplace where all individuals have equal opportunities. We value diversity in backgrounds, experiences, and perspectives.

Job Description Join a Team Trusted Worldwide for Mission-Critical Solutions For more than 80 years, Bergen Cable Technology has been a trusted manufacturer of high-precision wire rope and cable assembly solutions serving aerospace, defense, spacecraft, robotics, medical, transportation, and emerging technology industries. From aircraft flight control cables to highly engineered custom assemblies, our products support some of the world's most demanding applications where precision, quality, and reliability are critical. Why Join Bergen? At Bergen Cable, we're proud of the products we manufacture and the industries we support, but what truly sets us apart is our people. As a company with over eight decades of history, we've maintained an entrepreneurial spirit and collaborative culture while continuing to invest in the people and technology that drive our success. Here, employees are valued, supported, and empowered to make a meaningful impact. What You Can Expect • Meaningful work supporting mission-critical industries, • A collaborative, team-oriented culture built on respect and accountability, • Leaders who invest in employee development and long-term career growth, • Opportunities to contribute ideas and drive continuous improvement, • The chance to be part of a company with a proven legacy of quality, innovation, and customer success What Value This Role Will Bring As a Packaging Associate, you will play a critical role in ensuring our finished products are accurately packaged, labeled, and prepared for shipment. This position supports overall production efficiency by packaging Safety Cable Kits and Cable Assemblies in accordance with work instructions, customer requirements, and quality standards. Your attention to detail and commitment to accuracy will help ensure customers receive products that meet Bergen's high standards for quality and reliability. Key Responsibilities • Package Safety Cable Kits and Cable Assemblies through coating, bundling, etching, bagging, tagging, labeling, and boxing activities according to work instructions and job orders., • Operate packaging equipment including scales, heat sealers, etching equipment, automatic banders, and other tools while ensuring proper functionality and adherence to specifications., • Verify part numbers, quantities, labels, and packaging requirements to ensure accuracy and compliance with bills of material and customer requirements., • Etch, tag, mark, and label products according to job order instructions with a high degree of precision and attention to detail., • Perform in-process inspections and follow all work instructions, job orders, and quality standards to ensure product conformity., • Communicate production status, material concerns, equipment issues, and non-conformances to supervisors while maintaining a clean, safe, and organized work environment. Required Qualifications • High School Diploma or GED., • Strong attention to detail and commitment to quality., • Ability to follow written and verbal instructions accurately., • Ability to work efficiently and safely in a fast-paced manufacturing environment., • Ability to stand and/or sit for extended periods of time., • Ability to lift a minimum of 30 pounds. Preferred Qualifications • Minimum of one year of experience in a manufacturing, production, or warehouse environment., • Experience working from work instructions, job orders, or bills of material., • Familiarity with packaging operations, labeling requirements, and quality inspection processes., • Why Employees Thrive at Bergen Successful employees at Bergen typically demonstrate: • Customer focus, • Accountability and integrity, • Commitment to quality and precision, • Strong teamwork and communication skills, • Adaptability and continuous learning, • Initiative and a problem-solving mindset Compensation & Benefits Pay Range: $21-23 per hour Benefits Include • Comprehensive Medical, Dental, and Vision Insurance plans, • 401(k) with 100% Company Match up to 4% – no vesting schedule, • Paid Time Off, • 9 Paid Holidays, • Company-Paid Life Insurance & Long-Term Disability, • Professional Development Opportunities Position Details • Fairfield, New Jersey; On-site attendance required, • First Shift – Monday – Thursday: 7:00AM – 3:30PM Friday: 6:30AM-3:00PM, • PPE required (safety glasses and hearing protection in designated areas) Ready to Build What's Next? If you're looking for an opportunity to contribute to innovative solutions, work alongside talented professionals, and build a rewarding career with a company that values growth, teamwork, and excellence, we encourage you to apply today. Bergen Cable Technology is an Equal Opportunity Employer, including disability and protected veterans.

Description Mini-Circuits designs, manufactures and distributes integrated circuits, modules, and sub-systems for high-performance radio frequency (RF) and microwave applications. With design, sales, and manufacturing locations in over 30 countries, Mini-Circuits' products are used in a range of wired and wireless communications applications. Our products are also used in detection, measurement, and imaging applications, including military communication, guidance, and electronic countermeasure systems, commercial, scientific, military land, sea, and aircraft; automotive systems, medical systems, and industrial test equipment. Mini-Circuits sells its products to over 20,000 customers globally through our direct sales force, applications engineering staff, and sales representatives, as well as through our extensive website. Position Summary: The Quality Inspector is responsible for performing in-coming, in process and Final inspections of all parts following established procedures. They are also responsible for the proper packing of units that will be shipped to stock and/or customers. Salary Range: $21.00-$24.50 per hour Job Function: Perform visual and electrical inspection of various items using a vision measuring system and hand tools such as calipers, micrometer, force gauges etc. and electrical equipment such as LCR meter and multimeter. Maintain records of items inspected and packed. Ensure all parts/runs received in the department are acknowledged in the IQA system. Read assembly & mechanical drawings to determine specific requirements. Verify, complete, and sign the required documentation provided on the IQA database. Enter inspection record in Pre-encap Inspection & Final Inspection database. Verify part numbers against the documentation provided and ensure that the correct number of components was received. Understand and follow all relevant written and verbal instructions in the Inspection Plan & process. Report and share findings with Group Supervisor and Assistant Group Leader. Comply with ESD guidelines and regulations. Items to be inspected include PC boards, switches, cores, connectors, resistors, chip capacitors, enclosures and covers, cables, amplifiers, machined parts & packaging materials, etc. as per assembly drawings and specific criteria under supervision. Visual inspection is required using a microscope and magnifying lamp. Perform simple tests such as resistance to solvents, DC continuity, and material composition using an XRF machine. Identify and segregate defective units/materials. Capture photographs of reject and sample units. Pack units for shipment according to established company packing procedures in Arena The duties, responsibilities and expectations described above are not a comprehensive list and additional tasks may be assigned to the member, within the scope of the position. Qualifications: • Minimum High School Diploma, GED or international equivalent., • Ability to distinguish colors in accordance with the ISHIRA test for color blindness., • Basic Computer skills and understanding of the MS Office Suites., • Ability to read, write, and orally communicate in English and have the ability to understand and carry out verbal and written instructions., • Must have basic operational knowledge of how to use the equipment within the department., • Keep the work area clean and organized., • Follow all 5S requirements, • Update KPI boards on a weekly basis Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, sit and use hands to operate a computer keyboard. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Cultural Focus • Displays enthusiasm and Passion for their work, • Works to the standard of Uncompromising Quality by meeting or exceeding stated objectives and embracing continuous improvement, • Exercises sound Business Judgement, ensuring that efforts are on track with the Company's goals, • Operates with the mindset of Customer Obsession - by meeting or exceeding expectations to both internal and external customers, • Takes Accountability by taking ownership and accepting responsibility for their conduct and contributions, • Demonstrates a strong sense of urgency and accomplishes tasks with Speed and attention to detail, • Cooperates, collaborates and contributes to shared goals with a strong sense of Teamwork, • Conducts themselves with Honesty & Integrity and treats all members with Trust & Respect Additional Requirements/Skills • Comply, understand, and support corporate safety initiatives to ensure a safe work environment, • Ability and willingness to abide by Company's Code of Conduct, • Valid driver's license and ability to drive for extended periods of time, • Occasional travel, some overnight, as required Disclaimer: The listed qualifications and requirements for each position are intended as guidelines. Mini-Circuits reserves the right to hire outside of these guidelines at Management's discretion. Mini-Circuits is an Equal Opportunity Employer and does not discriminate on the basis of actual or perceived age, race, creed, color, national origin, sexual orientation, military status, sex, disability, predisposing genetic characteristics, marital status, familial status, gender identity, gender dysphoria, pregnancy-related condition, and domestic violence victim status or protected class characteristic, or any other protected characteristic as established by federal or state law.

Job Summary: Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam. Reporting To: Department Manager/Supervisor Essential Job Functions: • Review work orders to ensure familiarization with job requirements., • Follow technical instructions, interpret engineering blueprints and technical terms., • Operate machine(s) utilizing proper procedures for optimum weld quality., • Perform welding using Heli-arc, Spot weld, and Electron Beam equipment., • Inspect parts continuously to ensure that the welding process is performed in a manner consistent with company standards of quantity and quality., • Perform set-ups, adjust control settings to meet strength, leak test, pressure and penetration requirements for a wide variety of assembly types and materials., • Leak test welded parts at each operation as required by routing., • Record weld results and distribute daily report., • Maintain file of weld schedules and fixtures in good order in weld room., • Perform cross-sectioning of parts where required., • Perform routine maintenance on machines and equipment in the weld room as required. Adhere to health and safety regulations. Skills and Abilities: • Basic computer skills, • Ability to work in a fast-paced working environment, • Attention to detail, • Teamwork and communication skills, • Ability to lift/move up to 30lbs., • Ability to walk/stand for prolonged periods of time Education and Experience: • High School Diploma or equivalent., • Technical degree is a plus Benefits: • Medical, • Dental, • Vision, • Short Term Disability, • Long Term Disability, • PTO, • Paid Holidays, • Paid Sick Days, • 401K / 401K Company Match, • Life Insurance, • Paid Jury Duty, • Employee Referral Program, • Tuition Reimbursement Program based on, • Employee Assistance Program Salary Range: $28.00 - $35.00/Hour, Depending on Experience. EEOC Statement: MW Industries, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Visit us at www.mwcoomponents.com for more information about MW Industries, Inc. and our affiliate companies. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description: Saab, Inc. is growing in East Syracuse, NY, and we are seeking a Senior Quality Inspector, In-Process Inspection. Responsibilities: • Authorize assembly process completion and support the build team with in-process inspections throughout the build process., • Validate visually and dimensionally that the product meets requirements as specified in engineering drawings., • Inspect for defects in surfaces, fasteners, sealant, and paint, and testing., • Compile technical data and reports to provide feedback on final inspection results and recommend corrective actions., • Develop deviation reports and represent Quality at the Material Review Board., • Be responsible for non-conforming material processes and procedures., • Deliver a high level of workmanship in inspection processes for structural assembly and system installations., • Apply experience with quality management systems and become a subject matter expert in the company management system., • Participate in tooling validation and application to meet product requirements for quality and efficiency., • Develop standardized work procedures to ensure high repeatability., • Audit production processes to ensure compliance and recommend improvements., • Participate in and/or lead continuous improvement projects., • May be required to work at either our Enterprise or Aspen Park facilities, both located in East Syracuse, NY. Compensation Range: $28.80 - $34.57 per hour The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: • High School Diploma or equivalent with 7+ years of qualified inspection experience in manufacturing., • Experience with ISO/AS9100 and highly standardized processes., • Strong communication skills and the ability to work as part of a team., • Proficiency in interpreting engineering drawings and specifications in written and digital formats., • Ability to execute appropriate work methods and select the right tools to achieve the required level of quality and efficiency., • Ability to work with standardized procedures to ensure high repeatability in a highly advanced and connected environment. Preferred Qualifications: • Technical degree or certification in electro/mechanical assembly, mechanics, or maintenance., • IPC certification. Physical Requirements: • Must be self-mobile and able to stand for extended periods., • Ability to perform physical tasks such as sitting, bending, stooping, walking, climbing, and reaching during a normal workday., • Ability to perform repetitive motions, such as lifting or assembling parts, including the use of handheld power tools., • Ability to lift up to fifty (50) pounds., • Hearing and vision within normal ranges are important for conversations and receiving ordinary information and directives from management as required., • Ability to work extended hours if needed. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: • Medical, vision, and dental insurance for employees and dependents, • Generous paid time off, including 8 designated holidays, • 401(k) with employer contributions, • Tuition assistance and student loan assistance, • Wellness and employee assistance resources, • Employee stock purchase opportunities, • Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in ten U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Junior Estimator Location: Brooklyn, NY Employment Type: Full-Time Salary: $75,000 - $100,000 We are working with a well-established mechanical and civil contractor based in Brooklyn, NY, with four decades of experience delivering critical infrastructure work across New York City. The company self-performs public works, wastewater, institutional, and heavy mechanical projects for city and state agencies and has built a growing backlog on the strength of finishing what it starts. Despite its scale, it runs like a close-knit, family-oriented team rather than a large corporate shop, with a field-first operating philosophy summed up internally as "the field drives the bus." As bid volume grows, the company is adding a Junior Estimator to its preconstruction team to increase estimating capacity, keep bids consistent and on time, and free up senior estimators to focus on higher-value work. This is a true entry point into mechanical estimating. You will handle takeoffs, quotes, and bid assembly under the guidance of experienced estimators, and take on more scopes and bid sections as you prove yourself. The right person is hungry, technical, and coachable, and wants to learn the trade from the ground up with a team that will invest in them. What You'll Do • Perform quantity takeoffs for mechanical scopes, including piping, valves, equipment, and pipe supports, • Organize and manage bid documents, making sure drawings, specifications, and addenda are current and every estimate reflects the latest information, • Request, track, and follow up on vendor and subcontractor quotes, • Level quotes side by side and identify scope gaps, exclusions, and overlaps, • Assist with bid assembly, including scope sheets, clarifications, qualifications, and pricing tabs, • Help prepare bid forms and required documentation for public sector bids, • Track bid deadlines and help keep multiple bids moving at the same time, • Maintain clean, complete, well-organized estimating files in company systems, • Support the handoff of awarded work to Operations with clearly defined scope, • Work closely with senior estimators to learn pricing, labor, and bid strategy, • Clearly explain and stand behind your takeoff methodology, • Take ownership of more scopes and bid sections over time What You'll Bring • 0 to 3 years of construction or estimating experience, • Trade school, Construction Management or Engineering graduates, and candidates with small contractor experience all welcome, • Proficiency in Bluebeam or similar takeoff software, • Ability to read construction drawings and specifications; MEP experience strongly preferred, • Mechanical, plumbing, or piping exposure a plus, • Strong attention to detail and organization, • A sense of urgency and comfort working to hard deadlines, with quote turnaround measured in hours, not days, • Low ego and a genuine willingness to learn, • A process-driven mindset and comfort working within structured systems, • Solid Excel skills How Success Is Measured • Takeoff accuracy within 5% variance, • Quote turnaround within 24 to 48 hours, • Zero missed bid deadlines, • Clean, organized bid files, • Growing independence across scopes What You'll Gain • Salary range of $75,000 - $100,000 based on experience, • Comprehensive benefits including medical, dental, and vision coverage, • 401(k) retirement plan, • Paid time off, 5 days in your first year and 10 days annually after that, • A clear career path from Junior Estimator to Estimator I, Estimator II, and Senior Estimator, • Increasing ownership of scopes and bid sections as your skills grow, • Hands-on mentorship from experienced estimators on pricing, labor, and bid strategy, • The stability of a growing backlog of public agency work backed by a company with four decades of infrastructure experience across New York City, • A close-knit, family-style culture where people build long careers rather than move through as a number, • Real investment in your development, with ongoing training as the company takes on more complex work, • The tangible, public impact of work on the infrastructure that keeps New York City running At Framework, we keep it simple: we connect great people with great builders. We're not just filling seats - we're helping construction professionals find real opportunities with companies that value what they bring to the table. Our candidates trust us because we're honest, we follow through, and we never push roles that aren't the right fit. We take the time to understand where you're coming from and where you want to go. The builders we represent are more than just clients to us. Many of them are friends and longtime partners. If we wouldn't feel confident working for them ourselves, we wouldn't introduce them to the people who trust us with their careers. On the flip side, our clients count on us to bring high-quality people who are the real deal - both in skill and character. They'll tell you we just get it. We're proud to be the kind of recruiters who do what's right, not what's easy, and we make sure it's a win for everyone involved.

Job Summary: Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam. Reporting To: Department Manager/Supervisor Essential Job Functions: • Review work orders to ensure familiarization with job requirements., • Follow technical instructions, interpret engineering blueprints and technical terms., • Operate machine(s) utilizing proper procedures for optimum weld quality., • Perform welding using Heli-arc, Spot weld, and Electron Beam equipment., • Inspect parts continuously to ensure that the welding process is performed in a manner consistent with company standards of quantity and quality., • Perform set-ups, adjust control settings to meet strength, leak test, pressure and penetration requirements for a wide variety of assembly types and materials., • Leak test welded parts at each operation as required by routing., • Record weld results and distribute daily report., • Maintain file of weld schedules and fixtures in good order in weld room., • Perform cross-sectioning of parts where required., • Perform routine maintenance on machines and equipment in the weld room as required. Adhere to health and safety regulations. Skills and Abilities: • Basic computer skills, • Ability to work in a fast-paced working environment, • Attention to detail, • Teamwork and communication skills, • Ability to lift/move up to 30lbs., • Ability to walk/stand for prolonged periods of time Education and Experience: • High School Diploma or equivalent., • Technical degree is a plus Benefits: • Medical, • Dental, • Vision, • Short Term Disability, • Long Term Disability, • PTO, • Paid Holidays, • Paid Sick Days, • 401K / 401K Company Match, • Life Insurance, • Paid Jury Duty, • Employee Referral Program, • Tuition Reimbursement Program based on, • Employee Assistance Program Salary Range: $28.00 - $35.00/Hour, Depending on Experience. EEOC Statement: MW Industries, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Visit us at www.mwcoomponents.com for more information about MW Industries, Inc. and our affiliate companies. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. Scope of Position The Assembler, Package Heater position is responsible for assembling a variety of mechanical and electrical subassemblies and performing bench and floor assembly to complete packaged heater units. Working from blueprints, schematics, and verbal or written instructions, this role ensures products are assembled accurately, safely, and in accordance with quality standards. This is a union position. This position has no supervisory responsibilities. This position reports to the Production Supervisor. This role is onsite and is based in Blauvelt, NY. Primary Job Duties and Responsibilities • Assemble mechanical and electrical components into completed packaged heater units., • Perform bench and floor assembly operations using technical drawings, blueprints, schematics, and work instructions., • Precision-fit components to meet engineering specifications and required tolerances., • Operate hand tools, power tools, measuring instruments, pallet jacks, and other assembly equipment., • Inspect parts, subassemblies, and finished products to ensure quality, accuracy, and compliance with specifications., • Package components and finished equipment for shipment, ensuring proper protection, labeling, and handling requirements are met., • Utilize Kanban systems, including Kanban cards, to support inventory replenishment and material flow., • Prepare surfaces and apply paint as required to achieve high-quality finished products., • Follow all safety policies, procedures, and standard work instructions., • Maintain a clean, organized, and safe work environment., • Support continuous improvement initiatives and contribute to team productivity goals., • Assume responsibility for other projects and duties as assigned by Production Supervisor or other company management., • Responsibility directly tied to Watts Value (Integrity, Accountability, Continuous Improvement, Transparency), • Travel Requirements: N/A. Required Qualifications • High school diploma or equivalent., • Ability to read and interpret blueprints, drawings, work instructions, and technical documents., • Ability to safely use hand tools, power tools, and measuring equipment., • Basic mechanical aptitude and troubleshooting skills., • Ability to lift, move, and handle parts and materials safely., • Strong attention to detail and commitment to quality workmanship., • Effective communication and teamwork skills., • Commitment to workplace safety and compliance with all company policies., • Understanding of and adherence to applicable laws, codes, policies, regulations, and safety practices and procedures, as applicable., • Must successfully establish employment eligibility and satisfactorily complete background checks, including drug screening, and required pre-employment testing as a condition of employment. Preferred Qualifications • Previous experience in mechanical assembly, manufacturing, fabrication, or a related industrial environment., • Experience working with Kanban systems and lean manufacturing principles., • Experience packaging industrial equipment for shipment., • Painting and finishing experience in a manufacturing environment. General Applicable Company Competencies • Commitment to Watts' values of integrity, accountability, continuous improvement and innovation, and transparency., • Punctuality and dependability., • Ability to be flexible and adapt to changing work priorities and stressful conditions., • Adherence to all personnel policies, procedures, and standards of process as implemented by Watts., • Maintain productive and collaborative relationships with other Watts employees., • Adherence to Watts' seven cultural beliefs: Growth Mindset, Customer-Focused Innovation, Constant Communication, Clear Goals, Collaborate Globally, Be Inclusive, and Take Action. Working Conditions: While performing the job duties, you will be working on-site in a manufacturing facility. You will be required to work at the Company's Blauvelt, NY location. Your scheduled work hours will be communicated to you by your manager. Physical Requirements: Specific physical abilities required for this position include, but are not limited to: • Ability to stand for long periods of time., • Ability to lift and carry up to 25 pounds., • Ability to push and pull up to 25 pounds., • Ability to physically move around manufacturing floor., • Ability to read documents and communicate clearly with management and coworkers., • Ability to wear personal protective equipment, which may include, but is not limited to, safety shoes, hearing protection, and safety glasses. Pay Range: The expected salary range for this position is $27.14- $29.82 hourly. Actual compensation will be dependent upon individual skills, experience, qualifications, and applicable law. Nothing in this job description restricts Watts' right to assign or reassign duties, responsibilities, and working hours/conditions to this position at any time. This position is "at will," which means that either the employee or Watts may terminate the employment relationship at any time, with or without notice, and for any lawful reason. #LIOnsite Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. • Competitive compensation based on your skills, qualifications and experience, • Comprehensive medical and dental coverage, retirement benefits, • Family building benefits, including paid maternity/paternity leave, • 10 paid holidays and Paid Time Off, • Continued professional development opportunities and educational reimbursement, • Additional perks such as fitness reimbursements and employee discount programs, • Learn more about our benefit offerings here: https://tapintowattsbenefits.com/ How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

Description Mini-Circuits designs, manufactures and distributes integrated circuits, modules, and sub-systems for high performance radio frequency (RF) and microwave applications. With design, sales and manufacturing locations in over 30 countries, Mini-Circuits' products are used in a range of wired and wireless communications applications. Our products are also used in detection, measurement and imaging applications, including military communication, guidance and electronic countermeasure systems, commercial, scientific, military land, sea and aircraft; automotive systems, medical systems, and industrial test equipment. Mini-Circuits' sells our products to over 20,000 customers globally through our direct sales force, applications engineering staff, sales representatives, as well as through our extensive web site. Position Summary: • Installation of components on Printed Circuit Boards such as resistor, capacitor, IC, etc. with soldering, welding and reflow processes., • Perform electrical joints on wires, terminals, connectors from medium to high soldering levels., • Mechanical assembly such as connector installation to case., • Bonding component, PCB and other materials by epoxy, chip bonders, etc., • Perform assembly under a microscope. Salary Range: $18.00 - $23.00 per hour Job Function: • Install component such as capacitors, resistors, ICs, etc. by soldering, reflow and welding processes., • Use Conveyor Oven, Hot Plate, Stand-up Oven or similar in curing assembly parts., • Use dispensing machines in bonding components, PCB and other assembly related materials., • Operate machines such as cutting dies, installation dies and other assembly related machines., • Install tiny or microscopic components on PCB., • Cutting and bending component leads such as quad leads, resistors, etc., • Mechanical assemblies such as terminal installation, PCB mounting into the case, etc., • Wire welding and bonding into components and PCB., • Soldering of cans to header and connectors to case., • Wire cutting, stripping and tinting., • Use and maintain hand tools such as pliers, tweezers, soldering tools, thermometers, screw drivers and other equipment., • Follow procedures and drawings. Recommend improvements and detect errors in the assembly process to the team leader., • Fill up paper works and other necessary documents upon starting and completion of a run., • Review own work and check for errors and other abnormalities., • Enter run information in the computer such as Clock ON and OFF. Retrieve drawings and procedures for the run., • To assist engineers in building prototypes and qualification assemblies., • Follow all company procedures. The duties, responsibilities and expectations described above is not a comprehensive list and additional tasks may be assigned to the member, within the scope of the position. Qualifications: • Read, write and orally communicate in English., • High school diploma or GED., • Interpret and understand assembly drawings., • One year experience in electrical assembly or outside related experience., • Able to perform assembly under a microscope., • Able to use a soldering iron., • Able to perform reflow solder with conveyor oven., • Able to distinguish and use common hand tools such as pliers, tweezers, etc., • Familiar with basic computer operation., • Ability to distinguish colors in accordance with ishihara test for color blindness., • Ability to stand and walk to an assembly equipment such as reflow ovens., • Ability to work in an environment that are filled with constant noise from manufacturing equipment., • Ability to work while wearing chemical masks and gloves., • Level B soldering certification, • Able to work in a fast phase manufacturing environment., • Good teamwork attitude. Disclaimer: The listed qualifications and requirements for each position are intended as guidelines. Mini-Circuits reserves the right to hire outside of these guidelines at Management's discretion. Mini-Circuits is an Equal Opportunity Employer and does not discriminate on the basis of actual or perceived age, race, creed, color, national origin, sexual orientation, military status, sex, disability, predisposing genetic characteristics, marital status, familial status, gender identity, gender dysphoria, pregnancy-related condition, and domestic violence victim status or protected class characteristic, or any other protected characteristic as established by federal or state law

Location: Brooklyn, NY – 693 Atkins Avenue (On-Site) Schedule: Monday–Friday, 9:00 AM–5:00 PM Compensation: $60,000 Annually, occasional overtime may be required and is included as part of the compensation package Employment: Full-Time Eligibility: U.S. Citizen or Permanent Resident About the Role We’re looking for an organized, proactive, and hands-on Fulfillment Operations Specialist to keep our logistics tight and our customers happy. In this role, you’ll be the operational connective tissue making sure every order moves smoothly from inventory to out-the-door delivery. You’ll collaborate closely with our Warehouse Manager, Logistics team, and Operations Manager to manage inventory across multiple hubs and streamline everyday workflows. This isn’t a pure desk job or a pure warehouse gig—it’s a dynamic mix of operational management, cross-team coordination, and rolling up your sleeves when needed. If you’re someone who takes real ownership of your work, thrives in a fast-moving environment, and loves turning messy logistics into smooth systems, you’ll fit right in. Key Responsibilities • Own Order Fulfillment: Oversee picking, assembly, packaging, and dispatch prep to ensure every order goes out on time and 100% accurate., • Connect the Hubs: Coordinate inventory across multiple warehouse locations to track down components, solve shortages, and complete orders., • Verify & Audit: Track incoming inventory in our receiving system to ensure every component is logged and accounted for before shipping., • Keep Data Crisp: Update order statuses in real time within our fulfillment systems, accurately tracking partial shipments and outstanding items., • Troubleshoot on the Fly: Spot bottlenecks, inventory gaps, and discrepancies early—then partner with team leads to fix them fast., • Run Daily Ops: Work hand-in-hand with the Warehouse Manager to set daily priorities and keep operational momentum high. What We're Looking For Above all, we value mindset over a specific career path. We’re looking for someone upbeat, dependable, super-organized, and driven by a strong sense of ownership. • 3+ Years of Experience: Background in any structured, professional environment is welcome. If you’ve worked in operations, logistics, retail management, customer support, or similar fast-paced setups, that’s a big plus., • Tech-Savvy & Adaptable: Quick to pick up new software, inventory systems, and operational tools without needing hand-holding., • Strong Communicator: Clear, prompt, and proactive when coordinating with teams and keeping everyone aligned., • Work Authorization: Must be a U.S. Citizen or Permanent Resident., • Reliable & Punctual: Someone team members can depend on to show up and execute consistently. Nice to Have: • College degree (preferred, but real-world execution matters most)., • Bilingual in English and Spanish., • Prior experience in fulfillment, warehouse, logistics, retail or team leadership. Compensation & Benefits • $60,000 USD annual salary, • Monday–Friday, 9:00 AM–5:00 PM; weekends off. Occasional overtime may be required and is included as part of the salary, • Medical benefits available, • Opportunities for growth, • Direct hire with School Basics Location & Commute • 693 Atkins Avenue, Brooklyn, NY, • Street and nearby parking are available, although there is no dedicated company parking., • We strongly prefer candidates based in Brooklyn, Queens, or Lower Manhattan. The facility is located a 10-minute walk from the nearest public transit stop. Candidates should have reliable transportation to reach location.

Job Summary: Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam. Reporting To: Department Manager/Supervisor Essential Job Functions: • Review work orders to ensure familiarization with job requirements., • Follow technical instructions, interpret engineering blueprints and technical terms., • Operate machine(s) utilizing proper procedures for optimum weld quality., • Perform welding using Heli-arc, Spot weld, and Electron Beam equipment., • Inspect parts continuously to ensure that the welding process is performed in a manner consistent with company standards of quantity and quality., • Perform set-ups, adjust control settings to meet strength, leak test, pressure and penetration requirements for a wide variety of assembly types and materials., • Leak test welded parts at each operation as required by routing., • Record weld results and distribute daily report., • Maintain file of weld schedules and fixtures in good order in weld room., • Perform cross-sectioning of parts where required., • Perform routine maintenance on machines and equipment in the weld room as required. Adhere to health and safety regulations. Skills and Abilities: • Basic computer skills, • Ability to work in a fast-paced working environment, • Attention to detail, • Teamwork and communication skills, • Ability to lift/move up to 30lbs., • Ability to walk/stand for prolonged periods of time Education and Experience: • High School Diploma or equivalent., • Technical degree is a plus Benefits: • Medical, • Dental, • Vision, • Short Term Disability, • Long Term Disability, • PTO, • Paid Holidays, • Paid Sick Days, • 401K / 401K Company Match, • Life Insurance, • Paid Jury Duty, • Employee Referral Program, • Tuition Reimbursement Program based on, • Employee Assistance Program Salary Range: $28.00 - $35.00/Hour, Depending on Experience. EEOC Statement: MW Industries, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Visit us at www.mwcoomponents.com for more information about MW Industries, Inc. and our affiliate companies. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Hi- Rel Solder - Up to $20k Sign On Bonus based on Experience Hi-Rel Solder Assembler to join our manufacturing team. The successful candidate must have 2-3 year's experience. • Perform precision hand soldering of surface-mount and through-hole components to IPC Class 3 standards., • Responsible for assembling and soldering high-reliability printed circuit boards (PCBs) and sub assemblies in accordance with industry standards such as IPC J-STD-001, IPC-A-610., • The candidate should have working knowledge of Operating soldering equipment, microscopes, and other assembly tools., • Must be able to read and interpret assembly documents and engineering drawings. Education and Required Skills • High School diploma or equivalent and 2+ years in PCB or electronics assembly, preferably in a Hi-Rel or relative environment., • Proficiency in soldering to IPC J-STD- A-610 Class 3 standards., • Certification in IPC J-ATD-001 and/or IPC-A-610., • Experience in working under a microscope and magnification and with fine-pitch components., • Familiarity with ESD protection procedures., • Ability to read and understand technical documents and drawings., • Excellent attention to detail and manual dexterity. Strong computer and written skills is a PLUS, willing to train an enthusiastic applicant willing to learn a new skill. Salary Range is 54K-58K annum depending on experience 100% on-site EOE/Disability/Veteran FEI offers a comprehensive benefits package that includes Medical, Dental, Vision, Flexible Spending Accounts, and a 401(k) plan with a 6% company match in company stock. We also provide a very generous paid time off policy, along with 11 paid holidays. In addition, we operate on a 9/80 work schedule, which gives employees every other Friday off. This schedule includes longer workdays-9 hours and 45 minutes with a mandatory 45-minute lunch break. One week consists of four workdays (36 hours), and the following week includes five workdays (45 hours). Despite this variation, employees are paid for a consistent 40-hour workweek, with weekly pay.

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. Scope of Position The Assembler, Package Heater position is responsible for assembling a variety of mechanical and electrical subassemblies and performing bench and floor assembly to complete packaged heater units. Working from blueprints, schematics, and verbal or written instructions, this role ensures products are assembled accurately, safely, and in accordance with quality standards. This is a union position. This position has no supervisory responsibilities. This position reports to the Production Supervisor. This role is onsite and is based in Blauvelt, NY. Primary Job Duties and Responsibilities • Assemble mechanical and electrical components into completed packaged heater units., • Perform bench and floor assembly operations using technical drawings, blueprints, schematics, and work instructions., • Precision-fit components to meet engineering specifications and required tolerances., • Operate hand tools, power tools, measuring instruments, pallet jacks, and other assembly equipment., • Inspect parts, subassemblies, and finished products to ensure quality, accuracy, and compliance with specifications., • Package components and finished equipment for shipment, ensuring proper protection, labeling, and handling requirements are met., • Utilize Kanban systems, including Kanban cards, to support inventory replenishment and material flow., • Prepare surfaces and apply paint as required to achieve high-quality finished products., • Follow all safety policies, procedures, and standard work instructions., • Maintain a clean, organized, and safe work environment., • Support continuous improvement initiatives and contribute to team productivity goals., • Assume responsibility for other projects and duties as assigned by Production Supervisor or other company management., • Responsibility directly tied to Watts Value (Integrity, Accountability, Continuous Improvement, Transparency), • Travel Requirements: N/A. Required Qualifications • High school diploma or equivalent., • Ability to read and interpret blueprints, drawings, work instructions, and technical documents., • Ability to safely use hand tools, power tools, and measuring equipment., • Basic mechanical aptitude and troubleshooting skills., • Ability to lift, move, and handle parts and materials safely., • Strong attention to detail and commitment to quality workmanship., • Effective communication and teamwork skills., • Commitment to workplace safety and compliance with all company policies., • Understanding of and adherence to applicable laws, codes, policies, regulations, and safety practices and procedures, as applicable., • Must successfully establish employment eligibility and satisfactorily complete background checks, including drug screening, and required pre-employment testing as a condition of employment. Preferred Qualifications • Previous experience in mechanical assembly, manufacturing, fabrication, or a related industrial environment., • Experience working with Kanban systems and lean manufacturing principles., • Experience packaging industrial equipment for shipment., • Painting and finishing experience in a manufacturing environment. General Applicable Company Competencies • Commitment to Watts' values of integrity, accountability, continuous improvement and innovation, and transparency., • Punctuality and dependability., • Ability to be flexible and adapt to changing work priorities and stressful conditions., • Adherence to all personnel policies, procedures, and standards of process as implemented by Watts., • Maintain productive and collaborative relationships with other Watts employees., • Adherence to Watts' seven cultural beliefs: Growth Mindset, Customer-Focused Innovation, Constant Communication, Clear Goals, Collaborate Globally, Be Inclusive, and Take Action. Working Conditions: While performing the job duties, you will be working on-site in a manufacturing facility. You will be required to work at the Company's Blauvelt, NY location. Your scheduled work hours will be communicated to you by your manager. Physical Requirements: Specific physical abilities required for this position include, but are not limited to: • Ability to stand for long periods of time., • Ability to lift and carry up to 25 pounds., • Ability to push and pull up to 25 pounds., • Ability to physically move around manufacturing floor., • Ability to read documents and communicate clearly with management and coworkers., • Ability to wear personal protective equipment, which may include, but is not limited to, safety shoes, hearing protection, and safety glasses. Pay Range: The expected salary range for this position is $27.14- $29.82 hourly. Actual compensation will be dependent upon individual skills, experience, qualifications, and applicable law. Nothing in this job description restricts Watts' right to assign or reassign duties, responsibilities, and working hours/conditions to this position at any time. This position is "at will," which means that either the employee or Watts may terminate the employment relationship at any time, with or without notice, and for any lawful reason. #LIOnsite Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. • Competitive compensation based on your skills, qualifications and experience, • Comprehensive medical and dental coverage, retirement benefits, • Family building benefits, including paid maternity/paternity leave, • 10 paid holidays and Paid Time Off, • Continued professional development opportunities and educational reimbursement, • Additional perks such as fitness reimbursements and employee discount programs, • Learn more about our benefit offerings here: https://tapintowattsbenefits.com/ How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

Penske Logistics is looking for warehouse associates to become part of an excellent team. This is a great opportunity for individuals who are safety conscious and have a pleasant, outgoing attitude who want to excel in a warehouse environment. Why is Penske Logistics for you? Work Schedule: • Sunday - Wednesday 8:00 AM to 6:30 PM Compensation: • $20.32 per hour Additional Benefits: • Medical Insurance, • Dental Insurance, • Paid time off, • Vision Insurance, • Life Insurance, • 401K, • Associate Referral Program, • $125 Boot Allowance, following 90-days of employment (Where applicable) Our associates also enjoy numerous associate discounts and opportunities to grow with the organization! Job Responsibilities: • Operation runs on an assembly line pick process and is fast paced., • On your feet and moving for the duration of your shift., • Working in ambient temperature, range could very between 55-75 degrees., • On your feet and moving for the duration of your shift., • Bending, reaching, pushing, pulling, walking., • Pushing/pulling stacks of bagels to assigned pack area., • Pushing/pulling stacks of bagels from trailer to staging area., • Loading/offloading full and empty bagel from and/or onto trailers., • Picking/packing bagel orders, • Ability to push/pull up to 50 lbs. (on wheels)., • Performing other duties as assigned to include but not limited to; stamping/coding., • Product, labeling and removing labels from plastic totes, general warehouse clean up., • Other projects and tasks as assigned by supervisor Benefits: Our excellent benefits plan keeps associates and their families happy, healthy and secure. To learn more visit https://penske.jobs/benefits/ Qualifications: No prior warehouse experience required but preferred. High school diploma or equivalent preferred Proficient reading skills and ability to follow directions required Ability to work independently, customer service, dealing with others, multi-tasking skills, organizational skills, flexible, excellent with numbers and time management skills required Flexible to work overtime preferred Ability to work in non-climate-controlled conditions required Regular, predictable, full attendance is an essential function of the job Ability to work independently, customer service, multi-tasking skills, organizational skills, flexible, and time management skills required Willingness to work the required schedule, work at the specific location required Complete a Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening required. This position is designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: -The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. -The associate will be required to remember and understand certain instructions, guidelines, or other information. The associate must be able to see and verbally communicate. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. -While performing the duties of this job, the associate will be required to move frequently, stand, walk, and sit. The associate is frequently required to use hands to touch, handle, and feel, and to reach with hands and arms. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. Penske is an Equal Opportunity Employer. Salary: $20.32/hr Benefits: Our excellent benefits plan keeps associates and their families happy, healthy and secure. To learn more visit https://penske.jobs/benefits/ Application Deadline: Ongoing About Penske Logistics Penske Logistics engineers state-of-the-art transportation, warehousing and freight management solutions that deliver powerful business results for market-leading companies. With operations in North America, South America, Europe and Asia, Penske and its associates help businesses move forward by increasing visibility and driving down supply-chain costs. Visit Penske Logistics to learn more. Job Category: Warehouse Job Family: Warehouse Address: 1110 Commerce Blvd Primary Location: US-NJ-Logan Township Employer: Penske Logistics LLC Req ID: 2611980

Location: Onsite in Allendale, NJ Job Type: 6 month contract to hire Schedule: Monday-Friday 7:30AM-4PM Interview Process: 1 and done onsite Position Summary Our client is seeking a Mechanical Assembler to support the assembly of mechanical components, subassemblies, and finished products within a manufacturing environment. This position requires strong mechanical aptitude, attention to detail, and the ability to follow engineering drawings, work instructions, and quality standards. The ideal candidate is hands-on, comfortable using a variety of tools and measuring equipment, and committed to producing high-quality work while maintaining a safe and organized workspace. Responsibilities • Assemble mechanical components, subassemblies, and finished products according to engineering drawings, specifications, and work instructions, • Use hand tools, power tools, torque tools, and measuring instruments to complete assembly tasks, • Read and interpret engineering drawings, assembly instructions, bills of materials (BOMs), schematics, and work orders, • Verify parts and materials before assembly to ensure accuracy and completeness, • Perform visual and dimensional inspections throughout the assembly process, • Identify and report defective materials, equipment issues, or production concerns, • Troubleshoot basic mechanical and assembly-related issues, • Maintain accurate production records and assembly documentation, • Follow established quality standards, safety procedures, and manufacturing processes, • Assist with packaging, labeling, and preparing finished products for shipment as needed, • Maintain a clean, organized, and safe work area in accordance with 5S principles, • Collaborate with engineering, quality, and production teams to resolve assembly or manufacturing issues, • Support continuous improvement initiatives related to quality, safety, and productivity Required Qualifications • High school diploma or equivalent, • Previous mechanical assembly experience in a manufacturing, production, or similar hands-on environment preferred, • Ability to read and interpret engineering drawings, work instructions, and technical documentation, • Experience using hand tools, power tools, torque tools, and measuring equipment, • Strong mechanical aptitude with basic troubleshooting skills, • Strong attention to detail and commitment to quality, • Ability to work effectively both independently and as part of a team, • Ability to lift up to 50 pounds and stand for extended periods Preferred Qualifications • 1–3 years of mechanical assembly experience, • Experience with electromechanical assemblies, • Familiarity with torque specifications and calibration requirements, • Experience working within an ISO-regulated manufacturing environment, • Knowledge of lean manufacturing and 5S principles Working Environment • Manufacturing and production environment, • Regular use of hand tools, power tools, and assembly equipment, • Frequent standing, bending, lifting, and repetitive movement throughout the workday, • Use of appropriate personal protective equipment (PPE) as required Compensation: $20-23/hr. Exact compensation may vary based on several factors, including skills, experience, and education. Benefit packages for this role will start on the 1st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law.

Elevate your career at Marotta Controls, a New Jersey Top Workplace four years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference—apply today! Sr. Production Engineer About the Role Marotta Controls is seeking a Production Engineer to support our Power & Actuation Systems team. The Production Engineer will be responsible for the technical management, maintenance, and development of new and existing production lines. This role supports manufacturing and operational goals by developing, implementing, and maintaining production methods, operation sequences, test equipment, tooling, and processes that ensure production capacity meets customer demand. The ideal candidate will bring mid-level to senior manufacturing engineering experience, strong technical problem-solving skills, and a continuous improvement mindset. This individual will support defect reduction, improve first-pass yield, participate in lean initiatives, and help drive safe, efficient, and high-quality manufacturing operations. Key Responsibilities • Design and improve systems and processes for new product introductions and existing production lines., • Develop, implement, and maintain manufacturing methods, operation sequences, test equipment, tooling, fixtures, and production processes., • Create, maintain, and refine detailed manufacturing documentation, including operation sheets, routers, set-up sheets, tooling sheets, and related work instructions., • Investigate, assess, and resolve production issues effectively and efficiently., • Participate in root cause investigations, troubleshooting activities, defect reduction efforts, and continuous improvement initiatives., • Implement process improvements to increase efficiency, improve yield, reduce defects, and support operational goals., • Design detailed assembly procedures, tooling, and test fixtures to support safe and efficient operations., • Assemble and test production hardware as needed., • Analyze equipment layout, workflow, assembly methods, and workforce utilization to maximize efficiency., • Apply Lean Manufacturing principles to tooling and fixture design, material selection, facility layout, cost estimates, DFM concepts, GD&T practices, documentation, performance metrics, and machine shop activities., • Generate procedures from applicable industry and aerospace specifications., • Communicate designs and technical requirements effectively with machinists, suppliers, internal teams, and external partners., • Work with suppliers and subcontracted service providers to procure necessary equipment and maintain equipment readiness., • Generate accurate estimates for set-up time, cycle time, materials, and other manufacturing requirements using cost-effective methods., • Define, monitor, and communicate performance metrics to management, and implement actions to resolve identified issues., • Facilitate training as needed to support a cross-trained workforce and operational objectives., • Support safe work practices, housekeeping standards, quality requirements, and company policies and procedures., • Contribute to a positive, cooperative, and safe work environment through effective communication at all levels of the organization., • Keep management informed of area activities, project status, and significant issues., • Complete special projects and additional assignments as required. Qualifications, Knowledge, and Skills • Senior-level production, manufacturing, or process engineering experience preferred., • Bachelor’s degree in Engineering or a related technical field required., • 7+ years of experience with the assembly, design, and implementation of precision devices., • Knowledge of electronics, test equipment, tooling, fixtures, and manufacturing processes., • Understanding of machining techniques, manufacturing documentation, routers, tooling sheets, and operational work instructions., • Experience applying Lean Manufacturing principles, root cause analysis, troubleshooting, and continuous improvement methods., • Strong verbal and written communication skills with the ability to interact effectively across all levels of the organization and with external partners., • Strong computer skills, including proficiency with Microsoft Office and applicable manufacturing, engineering, or business systems., • Ability to work independently and collaboratively in a fast-paced manufacturing environment. Work Environment • This role operates in both a professional office environment and a manufacturing/machine shop environment., • The employee may be exposed to conditions typical of a manufacturing or machine shop setting, including fluids, fumes or airborne particles, moving mechanical parts, noise, vibration, and temperature changes., • Standard office equipment is used regularly, including computers, phones, printers, scanners, and copiers., • Appropriate personal protective equipment may be required, including eye, hearing, and foot protection., • Some travel may be required, approximately 5–10%., • This is a full-time position. Physical Requirements • Ability to talk, hear, and communicate effectively., • Frequent use of hands and arms, including reaching, handling, and operating tools or equipment., • Ability to stand for extended periods, approximately 7–8 hours daily, and regularly walk, stoop, bend, turn, balance, crouch, and move throughout the facility., • Ability to skillfully use measuring instruments, hand tools, and power tools., • Specific vision abilities required include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus., • Ability to lift, push, pull, and/or move items weighing up to 50 pounds. This position is at our Parsippany, NJ office location. Pay Range: $125,000 to $140,000 Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best-in-class organization while enjoying a work-life balance, please visit our website at www.marotta.com to learn more about us and to apply. Check out all of our openings at https://marotta.com/job-openings/ VETERANS ARE ENCOURAGED TO APPLY No agencies, please.

About Company At ENNOVI we harness the power of two megatrends - electrification and AI - to help industries innovate at speed, operate smarter, and achieve sustainable growth. By combining these transformative forces with our global reach and best talent, we empower our customers to lead their markets and drive sustainable progress. From automotive to aerospace, consumer electronics, data storage, industrial, and medical markets, we help our customers achieve these megatrends by creating smarter, safer, and more sustainable solutions. We excel in developing high-performance, custom solutions that meet diverse technical needs, solve unique challenges, optimize performance, and adapt to evolving market demands. Our mission is to get customers to the future faster, from anywhere. Headquartered in Singapore, ENNOVI has a global presence across North America, Europe, SEA and China, where all its activities are socially responsible, with minimal environmental impact. Learn more at www.ennovi.com. Why Join Us At ENNOVI, we envision a future of electrification and innovation and strive to create an inspiring workplace where our employees are integral to shaping that future. We offer a dynamic, collaborative, and inclusive culture that encourages continuous learning, professional growth, and a sense of purpose. As a part of the ENNOVI team, employees experience the excitement of being at the forefront of cutting-edge technologies and contributing to a sustainable future. Our commitment to the transformation is epitomized by our five pillars: Speed, Innovation, Best Talent, Global Reach, and Sustainability. This entails navigating exponential market changes through agile structures, fostering innovation across all aspects of our business, strategically expanding our global footprint, championing sustainability initiatives and nurturing a winning team. Privacy Policy ENNOVI is an equal opportunity employer in conformance with all applicable laws and regulations to individuals who are qualified to perform job requirements. The Company administers its personnel policies, programs, and practices in a non-discriminatory manner in all aspects of the employment relationship, including recruitment, hiring, work assignment, promotion, transfer, termination, wage and salary administration, and selection for training. By applying to this job posting, you agree with and acknowledge our privacy policy. Job Summary The temporary Quality Engineer assists in the implementation and maintenance of all quality system requirements including APQP, Core Tools, customer concerns and customer visits, gauging, process control plans, supplier issues, customer specific requirements. Main Responsibilities • Establish and implement process control plans to include capability studies, gage repeatability, and reproducibility (Gage R&R) studies., • Prepares reports by collecting, analyzing, and summarizing data to make recommendations., • Devise tests, metrics, and criteria used to evaluate incoming materials, ongoing work-in-progress, and final product for inspection, • Development of inspection processes and SOPs for manufacturing floor and lab, • Performance process capability studies, • Investigate system failures and defects using root cause analysis such as 5WHY, fishbone diagrams, or others, to prevent recurring problems, • Prepare and submit Production Part Approval Process (PPAP) packages ensuring all elements are met per customer requirements., • Managing customer complaints (internal and external), • Completing 8Ds, • Participates in and performs Layered Process Audits (LPA) Qualifications • Strong IATF16949 knowledge, • Advanced skills in GD&T, • Organization skills with the ability to perform multiple tasks and obtain results working within strict time frames., • Capacity to work independently from general supervision (must be self-motivated once given direction/guidance), • Advance Product Quality Planning (APQP) experience, • Core tools and 8D’s methodology skills, • Ability to communicate effectively with all levels of staff and management, both internal and external, • Strong attention to detail, • Ability to read and interpret assembly and component drawings and engineering specifications

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference—apply today! Production Engineer II (Space Systems) Position Profile: The Production Engineer is primarily responsible for the technical management, maintenance and development of new and existing production lines. This individual supports the objectives of Marotta Controls, Inc. relative to manufacturing and operational goals. In this role the Production Engineer will develop, implement, and maintain methods, operation sequences, test equipment, and processes that continually ensure that equipment capacity will meet customer demand. The Production Engineer will also implement process improvements based on demonstrated improved yield results and participate in defect reduction activities and lean initiatives. Minimum Required Qualifications: • Bachelor’s Degree in Engineering or related field., • 2-5 years of related experience in a production/operations environment., • 2-5 years’ experience in design and manufacturing of valves, piping and related fluid and/or auxiliary equipment., • Knowledgeable of high-pressure fluids, clean rooms, and electronic test equipment., • Excellent verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, as well as any and all outside agents., • Highly computer literate, with MS Office/PC expertise, and demonstrated experience with applicable systems, programs, equipment, etc., • Must be a US Citizen Essential or Primary / Key Responsibilities: • Design new systems and processes for the introduction of new products or the improvement of existing products., • Develop and maintain testing policies, procedures, and performance metrics, in order to achieve targeted manufacturing objectives., • Investigate, assess and resolve production issues effectively., • Implement improvements to current operations to improve efficiency., • Effectively communicate with suppliers to procure necessary equipment., • Assemble and test production hardware., • Analyze layout of equipment, workflow, assembly methods, and workforce utilization to maximize efficiency, • Contribute to the ability of the Operations function to meet intended design requirements, by understanding and properly utilizing manufacturing tools and equipment., • Design detailed assembly procedures and tooling., • Generate procedures from various industry and aerospace specifications., • Design test fixtures., • Communicate designs with machinist., • Understand various machining techniques., • Apply Lean Manufacturing principles to tool/fixture design, material selection, facility layout plans, cost estimates, DFM concepts, GD&T practices, machine shop documentation (operations/ tooling sheets, routers, etc.), root cause investigations, trouble shooting, performance metrics and machine shop operational activities., • Secure external resources (subcontracted services) to maintain and ensure equipment is operational., • Perform all practices and activities related to Mfg. Eng. in a manner which supports commonality, standardization (where applicable), First Past Yield and utilization of safe/best industry practices., • Create, maintain and refine detailed mfg. documentation (i.e. Operation Sheets, Routers, Set-up/Tooling sheets, etc.) through effective selection of manufacturing methods (inclusive of inspection point selection)., • Design efficient/safe tools and fixtures required to support operations., • Generate accurate estimates (i.e. set-up, cycle time, material, etc.) using cost effective mfg. methods., • Define, monitor and communicate the status of performance metrics to management. Implement appropriate actions to resolve identified issues., • Effectively communicate issues in a timely manner to all affected parties internal/external to the Marotta Organization., • Contribute to a positive, cooperative and safe work environment through effective communication at all levels of the Marotta organization., • Participate in root cause investigations, troubleshooting activities (as req’d), continuous improvement initiatives/programs, etc. Additional Duties / Responsibilities: • Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required)., • Facilitate training, as needed, to maintain a cross-trained workforce and to support operational goals and objectives., • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements., • Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization., • Actively participate in team meetings, improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals., • Consistently demonstrate commitment to company values., • Keep management informed of area activities and of any significant problems., • Assume responsibility for related duties as required or assigned., • Ensure that work area(s) are clean, secure, and well maintained., • Complete special projects and miscellaneous assignments as required. Work Environment: • While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to: fluids, fumes or airborne particles, moving mechanical parts, noise and vibration., • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • Temperature of work environment may be affected by outside/external temperatures, machining processes, etc., • This is a full-time position. Weekend work may be required, as job duties demand., • Some travel may be required for this position (5-20%). Physical Requirements: • While performing the duties of this job, the Mechanical Engineer is regularly required to talk and hear., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Vision and color vision must pass job-required vision screening., • The Mechanical Engineer is frequently required to reach with hands and arms, and to use hands to finger, handle or feel., • The Mechanical Engineer is regularly required to stand, sit, walk, stoop, or crouch, and move about the facility., • The Mechanical Engineer may be required to lift and/or move items weighing up to 25 pounds. This position is at our Montville, NJ corporate offices location. Pay Range: $87,750 - $115,000/year Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at VETERANS ARE ENCOURAGED TO APPLY No agencies, please.

CNC MACHINIST - A SHIFT Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently recruiting CNC Machinists. DUTIES & RESPONSIBILITIES • Sets up machine and observes machine operation to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining, using precision measuring instruments such as micrometer and caliper., • Sets up and controls operation of computerized deburring and tooling machine to perform series of machining operations, such as drilling, chamfering, and deburring., • Inspects "first part" and inspects work pieces throughout the production run for out-of-tolerance machining., • Clean machine and work area., • Provide aid and guidance to machine operators with less experience or skill. SKILLS & QUALIFICATIONS • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes, • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating, • Ability to understand and carry out oral and written directives, • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible, • Thorough operational knowledge and skills of specific CNC mills and CNC lathes to be operated with the ability to calculate and set machine controls either manually or by entering commands, • Ability to operate assigned equipment safely and efficiently, • Ability to keep record of time spent and material used, • Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine and measuring tools, including micrometers and calipers, • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals, • A HS Diploma or GED, • 5 years of previous CNC setup and operation experience, • Experience on Mazak or Haas Machines preferred, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001: 2015, • Capacity to handle changes in business operations and adjust to new situations, • Preparedness to stand for extended periods, life heavy items, and operate equipment JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Compensation details: 23-37 Hourly Wage PI61251fc2ec75-26289-41940049

Job DescriptionDescription: La Maison Longchamp Based in Paris, Longchamp stands as an optimistic and independent family business with an international reputation. Joining Longchamp’s team means contributing to the creation and distribution of fashion and leather goods that are both fair and beautiful, and showcasing superior craftsmanship. With a presence in over 25 countries and employing 3,500 individuals, “la Maison” is now looking for innovative, passionate, and committed talent to continue its development in France and abroad in a demanding and caring working environment. Join one of our 300 boutiques, where you'll be able to offer our customers quality products, while working in an environment that values versatility and stimulates personal development. Longchamp USA is committed to fostering a diverse, equitable, and inclusive workplace where everyone feels valued and respected. We believe that a diverse team drives innovation and enhances our ability to serve our clients and communities effectively. We encourage individuals from all backgrounds, including but not limited to race, ethnicity, gender, sexual orientation, disability, age, and veteran status, to apply. We are an equal-opportunity employer and welcome applications from all qualified candidates. Job Summary: A Sales Associate is responsible for maintaining customer service as per company standards, generating sales, merchandising, cash register operations (POS), loss prevention, merchandising, and adherence to all company policies and store standards. Essential Duties & Responsibilities: Handles all aspects of Sales and Customer Service: • Generates and maximizing sales by convincing clients to purchase the company’s products., • Maintains an awareness of all product knowledge and merchandise care information., • Stays updated on new items and customer service guidelines and store policies., • Develops and maintains client books., • Keeps records of sales., • Follows customer service guidelines (i.e. proper greeting etiquette, returns, exchanges, transfers and loss prevention)., • Greets, serves and advises clients with outstanding customer service and a friendly smile., • Gift wraps and bags items for customers., • Assists with mailings, answers phone, and takes care of phone orders., • Assists in floor moves, merchandising, and displays., • Assists in processing and replenishing merchandise., • Participates in receiving and monitoring floor stock., • Stocks and re-stocks shelves, counters, and/or tables with merchandise., • Tags merchandise as needed (not only during sales period)., • Keeps the sales floor clean and orderly and practice the highest standards of general house keeping. Adhere to all company policies, procedures and practices. • Accurately and efficiently complete all sales transactions and maintain proper cash and media accountabilities at POS registers., • Works on special projects as necessary., • Any other duties as assigned by management. Requirements: Minimum Qualifications: • This job requires a minimum of a High School Diploma (or GED) and either have a degree in Retail, Fashion or related field or equivalent work experience and education., • Three plus years’ high-end retail, boutique or sales related work experience., • Understand inventory, customer’s sales experience and merchandising., • Perform all Cegid transactions proficiently, such as sales (cash, checks, credit or debit cards, Longchamp gift cards and merchandise return cards, travelers checks), returns, exchanges, item and customer look ups, CRM, run reports and open and close registers in accordance with Cegid Manual guidelines., • Proficient with the UPS System., • Properly prepare and send shipments., • Properly receive and check shipments., • Working knowledge in Microsoft Excel, Outlook, and Microsoft Word. Knowledge, Skills and Abilities: • Familiar with store operations., • Ability to speak and communicate effectively with associates and customers using strong interpersonal skills., • An organized, self-starter with the ability to work in a multi-task fast paced environment with minimum amount of supervision under stressful conditions (at times)., • Ability to process information/merchandise through computer system and POS register system., • Ability to read, count and write to accurately complete all documentation., • Read and understand work-related materials., • Ability to freely access all areas of the store including selling floor, stock area, and register area., • Ability to operate and use all equipment necessary to run the store., • Experience with researching and exploring new trends in the marketplace., • May travel between boutiques as necessary for business reasons., • Ability to work varied hours, days, evenings, weekends, or holidays as business dictates., • Key characteristics include an organized, self-starter with the ability to work in a multi-task fast paced environment with minimum amount of supervision under stressful conditions (at times)., • Ability to read, count and write to accurately complete all documentation., • Read and understand work-related materials., • Ability to freely access all areas of the store including selling floor, stock area, and register area., • An understanding of the French language would be a plus. Physical Demands & Working Conditions: • Climbing: Ascending or descending ladders, stairs, etc., • Balancing: Maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces. This factor is important if the amount and kind of balancing the amount and kind of balancing exceeds that needed for ordinary locomotion and maintenance of body equilibrium., • Stooping: Bending body downward and forward by bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full use of the lower extremities and back muscles., • Kneeling: Bending legs at knee to come to a rest on knee or knees., • Crouching: Bending the body downward and forward by bending leg and spine., • Reaching: Extending hand(s) and arm(s) in any direction., • Standing: Remaining upright on the feet, particularly for sustained periods of time., • Walking: Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another., • Pushing: Using upper extremities to press against something with steady force in order to thrust forward, downward or outward., • Pulling: Using upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion., • Lifting: Raising objects from a lower to a higher position or moving objects horizontally from position to-position. This factor is important if it occurs to a considerable degree and requires the substantial use of the upper extremities and back muscles., • Fingering: Picking, pinching, typing or otherwise working, primarily with fingers rather than with whole hand or arm as in handling., • Grasping: Applying pressure to an object with the fingers and palm., • Feeling: Perceiving attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips., • Talking: Expressing or exchanging ideas by means of the spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers accurately, loudly, or quickly., • Hearing: Perceiving the nature of sounds at normal speaking levels with or without correction, and having the ability to receive detailed information through oral communication, and making fine discriminations in sound., • Repetitive motions: Making substantial movements (motions) of the wrists, hands, and/or fingers. The physical requirements of this position: • Light work: Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for Sedentary Work and the worker sits most of the time, the job is rated for Light Work. The visual acuity requirements including color, depth perception, and field of vision: • The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication of parts at distances close to the eyes. The conditions the worker will be subject to in this position: • The worker is subject to both environmental conditions: Activities occur inside and outside. Benefits Offered: • Medical, Dental and Vision Insurance, • 401(k) with Company Match, • Company-Paid Life Insurance, • Supplemental Life Insurance, • Accident Insurance, • Company-Paid Short-Term and Long-Term Disability Insurance, • Maternity and Paternity Leave, • Pet Insurance, • Flexible Spending Account (FSA), • Employee Assistance Program (EAP), • Gym Membership Reimbursement

CNC MACHINIST - B-SHIFT Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. Advantech Industries Inc. is currently recruiting CNC Machinists for B-Shift. Hours are Monday Thursday, 3:45pm 2:15am. DUTIES & RESPONSIBILITIES Duties include, but are not limited to, the following: • Set up machine and observe machine operations to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining by using precision measuring instruments such as micrometers and calipers., • Set up and control operation of computerized deburring and tooling machine to perform a variety of machining operations which include drilling, chamfering, and deburring., • Inspect "first part" and inspect work pieces throughout the production run for out-of-tolerance machining., • Clean machine and work area., • Provide aid and guidance to machine operators with less experience or skill. SKILLS & QUALIFICATIONS • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating., • Ability to understand and carry out oral and written directives., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Thorough operational knowledge and skills of specific CNC mills and CNC lathes to be operated with the ability to calculate and set machine controls either manually or by entering commands., • Ability to operate assigned equipment safely and efficiently., • Ability to keep record of time spent and material used., • Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine and measuring tools, including micrometers and calipers., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals., • A High School Diploma or equivalent required., • 5 years of previous CNC setup and operation experience., • Experience on Mazak or Haas CNC Machines is preferred., • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001: 2015., • Capacity to handle changes in business operations and adjust to new situations., • Preparedness to stand for extended periods, life heavy items, and operate equipment. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Thursday 3:45 pm to 2:15 am Full time employment Compensation details: 23-37 Hourly Wage PI4621f76e26ac-26289-41940062

Job DescriptionDescription: La Maison Longchamp Based in Paris, Longchamp stands as an optimistic and independent family business with an international reputation. Joining Longchamp’s team means contributing to the creation and distribution of fashion and leather goods that are both fair and beautiful, and showcasing superior craftsmanship. With a presence in over 25 countries and employing 3,500 individuals, “la Maison” is now looking for innovative, passionate, and committed talent to continue its development in France and abroad in a demanding and caring working environment. Join one of our 300 boutiques, where you'll be able to offer our customers quality products, while working in an environment that values versatility and stimulates personal development. Longchamp USA is committed to fostering a diverse, equitable, and inclusive workplace where everyone feels valued and respected. We believe that a diverse team drives innovation and enhances our ability to serve our clients and communities effectively. We encourage individuals from all backgrounds, including but not limited to race, ethnicity, gender, sexual orientation, disability, age, and veteran status, to apply. We are an equal-opportunity employer and welcome applications from all qualified candidates. Job Summary: A Sales Associate is responsible for maintaining customer service as per company standards, generating sales, merchandising, cash register operations (POS), loss prevention, merchandising, and adherence to all company policies and store standards. Essential Duties & Responsibilities: Handles all aspects of Sales and Customer Service: • Generates and maximizing sales by convincing clients to purchase the company’s products., • Maintains an awareness of all product knowledge and merchandise care information., • Stays updated on new items and customer service guidelines and store policies., • Develops and maintains client books., • Keeps records of sales., • Follows customer service guidelines (i.e. proper greeting etiquette, returns, exchanges, transfers and loss prevention)., • Greets, serves and advises clients with outstanding customer service and a friendly smile., • Gift wraps and bags items for customers., • Assists with mailings, answers phone, and takes care of phone orders., • Assists in floor moves, merchandising, and displays., • Assists in processing and replenishing merchandise., • Participates in receiving and monitoring floor stock., • Stocks and re-stocks shelves, counters, and/or tables with merchandise., • Tags merchandise as needed (not only during sales period)., • Keeps the sales floor clean and orderly and practice the highest standards of general house keeping. Adhere to all company policies, procedures and practices. • Accurately and efficiently complete all sales transactions and maintain proper cash and media accountabilities at POS registers., • Works on special projects as necessary., • Any other duties as assigned by management. Requirements: Minimum Qualifications: • This job requires a minimum of a High School Diploma (or GED) and either have a degree in Retail, Fashion or related field or equivalent work experience and education., • Three plus years’ high-end retail, boutique or sales related work experience., • Understand inventory, customer’s sales experience and merchandising., • Perform all Cegid transactions proficiently, such as sales (cash, checks, credit or debit cards, Longchamp gift cards and merchandise return cards, travelers checks), returns, exchanges, item and customer look ups, CRM, run reports and open and close registers in accordance with Cegid Manual guidelines., • Proficient with the UPS System., • Properly prepare and send shipments., • Properly receive and check shipments., • Working knowledge in Microsoft Excel, Outlook, and Microsoft Word. Knowledge, Skills and Abilities: • Familiar with store operations., • Ability to speak and communicate effectively with associates and customers using strong interpersonal skills., • An organized, self-starter with the ability to work in a multi-task fast paced environment with minimum amount of supervision under stressful conditions (at times)., • Ability to process information/merchandise through computer system and POS register system., • Ability to read, count and write to accurately complete all documentation., • Read and understand work-related materials., • Ability to freely access all areas of the store including selling floor, stock area, and register area., • Ability to operate and use all equipment necessary to run the store., • Experience with researching and exploring new trends in the marketplace., • May travel between boutiques as necessary for business reasons., • Ability to work varied hours, days, evenings, weekends, or holidays as business dictates., • Key characteristics include an organized, self-starter with the ability to work in a multi-task fast paced environment with minimum amount of supervision under stressful conditions (at times)., • Ability to read, count and write to accurately complete all documentation., • Read and understand work-related materials., • Ability to freely access all areas of the store including selling floor, stock area, and register area., • An understanding of the French language would be a plus. Physical Demands & Working Conditions: • Climbing: Ascending or descending ladders, stairs, etc., • Balancing: Maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces. This factor is important if the amount and kind of balancing the amount and kind of balancing exceeds that needed for ordinary locomotion and maintenance of body equilibrium., • Stooping: Bending body downward and forward by bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full use of the lower extremities and back muscles., • Kneeling: Bending legs at knee to come to a rest on knee or knees., • Crouching: Bending the body downward and forward by bending leg and spine., • Reaching: Extending hand(s) and arm(s) in any direction., • Standing: Remaining upright on the feet, particularly for sustained periods of time., • Walking: Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another., • Pushing: Using upper extremities to press against something with steady force in order to thrust forward, downward or outward., • Pulling: Using upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion., • Lifting: Raising objects from a lower to a higher position or moving objects horizontally from position to-position. This factor is important if it occurs to a considerable degree and requires the substantial use of the upper extremities and back muscles., • Fingering: Picking, pinching, typing or otherwise working, primarily with fingers rather than with whole hand or arm as in handling., • Grasping: Applying pressure to an object with the fingers and palm., • Feeling: Perceiving attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips., • Talking: Expressing or exchanging ideas by means of the spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers accurately, loudly, or quickly., • Hearing: Perceiving the nature of sounds at normal speaking levels with or without correction, and having the ability to receive detailed information through oral communication, and making fine discriminations in sound., • Repetitive motions: Making substantial movements (motions) of the wrists, hands, and/or fingers. The physical requirements of this position: • Light work: Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for Sedentary Work and the worker sits most of the time, the job is rated for Light Work. The visual acuity requirements including color, depth perception, and field of vision: • The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication of parts at distances close to the eyes. The conditions the worker will be subject to in this position: • The worker is subject to both environmental conditions: Activities occur inside and outside. Benefits Offered: • Medical, Dental and Vision Insurance, • 401(k) with Company Match, • Company-Paid Life Insurance, • Supplemental Life Insurance, • Accident Insurance, • Company-Paid Short-Term and Long-Term Disability Insurance, • Maternity and Paternity Leave, • Pet Insurance, • Flexible Spending Account (FSA), • Employee Assistance Program (EAP), • Gym Membership Reimbursement Salary Description $21.45 - $25.00 per hour, plus monthly bonus

Job Description Transform and elevate the retail experience, one display at a time! ActionLink is seeking a Full-Time Retail Electronics Merchandiser to join our team for Brooklyn, NY and the surrounding area. What you will do: • Store Visits: Complete projects at major retail establishments like Best Buy, Walmart, Target, and others within an assigned radius territory, • Purpose: To turn shelves into sales magnets and drive revenue by ensuring the proper placement, assembly, maintenance, and troubleshooting of our clients' promotional product displays, • Clients: Represent innovative, global clients such as Microsoft, Samsung, T-Mobile, Dyson, Bose, Intel, and many others, • Scheduling: This position offers 32-40 hours per week. Project hours and times fluctuate, so flexibility Monday through Friday typically between 8:00am - 5:30pm is necessary for the position. No weekends or evening hours required., • Additional Opportunities: If you can cover a larger region and travel to other outlying areas or states, there may be opportunities for additional hours, • Reporting: Submit same-day digital surveys with feedback and pictures for each completed store visit What’s in it for you? • Compensation:The wage range for this position is $21.00 to $21.00 per hour commensurate with experience, • Additional Technical Projects: Available at higher rates, based on need, • Health Benefits: We offer medical, dental, vision, prescription coverage, and life insurance plans to invest in your health and financial stability, • W2 Employment: Includes a weekly pay schedule and direct deposit, • Retirement Savings: Consider our optional 401(k) retirement savings plan with company match, • Travel Reimbursement: Store-to-store drive time and mileage assistance, • Training: Paid training time is provided to prepare you for program success, • Time Off: Paid time off and paid holidays are part of the deal. Take a break and recharge! If you meet these qualifications, we’d love to connect with you! • Education: High School diploma or GED, • Retail Experience: Previous merchandising, 3PL, or relevant retail experience is highly desirable, • Versatility: Ability to handle all levels of merchandising work within the assigned territory, • Attention to Detail: Ability to follow complex written instructions and display diagrams, • Independence and Teamwork: Comfortable working independently most of the time and collaborating with a small team when needed, • Tech-ready: Internet access, Wi-Fi/GPS enabled smart device with latest OS update, laptop/desktop access, and basic hand-held tools., • Travel Ability: A valid driver’s license and reliable vehicle transportation, • Physical Ability: Must be able to stand, bend, stoop, climb ladders, and lift products weighing up to 50 lbs. without assistance ActionLink, in good faith, believes that this posted range of compensation is the accurate range for this role at the time of this posting. ActionLink may ultimately pay more or less than the posted range depending on candidate qualifications and locations in NY. This range may be modified in the future. We are an equal employment opportunity employer. MERCHAPP

Bob's Discount Furniture is seeking motivated, reliable, and team-oriented individuals to join us as Retail Outlet Warehouse Associates. Whether you're looking for full-time or part-time work, this role is key to keeping our stores running smoothlyfrom receiving and staging merchandise to ensuring our showroom and warehouse meet safety and visual standards. Retail Outlet Warehouse Associates are the hands-on heroes behind the scenes, making sure our customers receive the outstanding Bob's experience from the moment they walk in the door to the moment their furniture goes home. This is a physical, in-store role that requires flexibility, teamwork, and a readiness to support store operations. What You'll Bring to Bob's At Bob's Discount Furniture, we value the unique skills and experiences that each candidate brings. Success in this role is driven by reliability, attention to detail, communication, and a strong sense of teamwork. If you enjoy working in a fast-paced retail environment and are eager to contribute to the behind-the-scenes magic that drives customer satisfaction, this is the role for you! Key Skills for Success To excel in this role, you will need to demonstrate strengths in the following skill areas: Core Competencies & Expertise • Warehouse safety and inventory handling, • Merchandise receiving and staging, • Product assembly and visual merchandising, • Physical endurance and safe lifting techniques, • Communication and active listening, • Problem-solving and organization, • Customer interaction and teamwork, • Cleanliness and maintenance of workspaces Preferred Competencies & Skills • Prior experience in a retail stockroom, warehouse, or back-end operation, • Customer service mindset and positive attitude, • Ability to follow safety protocols and company guidelines, • Career-minded with a desire to grow within the company Who We Are At Bob's, we have fun, we love what we do, and we're growing fast! As one of the leading omni-channel furniture retailers in the country with over 190 stores, we're committed to creating a workplace that values skills-based hiring, diverse perspectives, and an inclusive culture where everyone can thrive. How We Will Support Your Success We know you have many choices when it comes to your career. At Bob's, we invest in your growth, well-being, and career advancement. Benefits & Perks • Competitive Medical, Dental, and Vision Insurance, • Paid Vacation, Personal Days, Sick Days, Holidays, and your Birthday, • 401(k) Profit Sharing Plan with a generous company match, • Employer-paid Life Insurance and voluntary coverage options, • Pet Insurance and employee wellness programs, • Financial assistance through Bob's Bail Out and Helping Hand Programs, • On-the-job training, career growth, and internal advancement, • Employee Discount starting Day 1, • Hourly Pay Range: $16.00 to $17.00 per hour Our Culture & Core Values At Bob's, we believe in fostering a positive, inclusive, and skill-driven work environment. Our core valuesHonesty, Integrity, Transparency, Community, Safety, Diversity, Accountability, and Funguide everything we do. We're not just a workplace; we're a team that supports and celebrates each other! Minimum Qualifications • Must be at least 18 years old to be considered for employment with Bob's, • Ability to work a retail schedule, • Comfortable lifting, moving, and assembling merchandise, • Strong teamwork, listening, and communication skills Physical Demands • Ability to stand, bend, lift, and move heavy furniture (up to 75 lbs.), • Frequent walking throughout the warehouse and showroom, • Manual dexterity and the ability to use tools for assembly Diversity is a Core Value at Bob's At Bob's Discount Furniture, we want you to feel at home. Whether you're shopping with us or a part of the Bob's team, we want you to know that you are valued, appreciated, and free to be who you are. We are committed to creating a place as diverse as the communities we serve. Expected Base Pay Not Including Potential Commissions, Incentive, Bonus, etc. Opportunities: Hourly pay It is policy of Bob's Discount Furniture, Inc., to provide equal employment opportunity to all employees and applicants for employment. No person shall be discriminated against or harassed because of race, religion, color, sex, age, national origin, disability, pregnancy, citizenship, veteran or military status, or any other protected status in accordance with federal, state or local law. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact talentacquistionteam@mybobs.com . This contact information is for accommodation requests only and cannot be used to inquire about the status of applications.

For over three decades, Cirtec Medical has been a leading outsourcing partner for complex medical devices. We specialize in providing comprehensive solutions for Class II and III devices, from design and development to precision components and finished device assembly. Our expertise spans neuromodulation, implantable drug delivery, cardiac rhythm management, structural heart, mechanical circulatory support, and minimally invasive surgical systems. Our dedicated teams prioritize growth, innovation, and collaboration. We actively seek opportunities for improvement to enhance our support for clients. If you embrace a growth mindset and thrive on challenges, you may be a perfect fit for our team! This position is primarily responsible for developing relationships, increasing visibility, and growing sales for the Cirtec Medical Interventional Business Unit; markets including Structural Heart, Electrophysiology, and Neurovascular. This highly motivated and technically sophisticated individual will be responsible for developing strategic OEM partnerships and securing new business opportunities involving complex catheter shafts, steerable catheter assemblies, delivery systems, and highly engineered medical device components. Reporting directly to the Director of Business Development, this role will have significant visibility and influence in shaping Cirtec's growth strategy within key interventional device markets. Key Responsibilities: • Generate and develop a pipeline of opportunities for Cirtecs Interventional Business Unit, • Understand strategic markets and Cirtec Interventional value proposition, • Identify and engage with key targets within strategic markets, • Lead complex sales engagements, • Grow strategic accounts while fostering a pipeline of relationships with prospective clients, • Negotiate contracts with prospective clients along with support from manager and legal, • Prepare weekly and monthly reports on pipeline targets, • Present the overall Cirtec product offerings and capabilities to prospects with a focus on the Interventional business, • Provide timely, accurate quotes for delivery to prospect, • Hunt for new accounts and new applications, • Assist with sales pipeline management by working with key sustaining customers to obtain an accurate 12-month rolling forecast, • Work with Associate Business Service Manager and other key stakeholders to manage and drive Quarterly Business Reviews with customers, • Travel 40%-50% for Customer trips, site tours, trade shows throughout North America, • Main locations include: Santa Clara, CA, Brooklyn Park, MN, Alajuela, Costa Rica Must Have: • Bachelors degree required, MBA highly preferred, • 3-5+ years of Medical Device Business Development experience (CDMO experience, advanced catheter experience a plus) with a strong understanding of commercial sales process, • Demonstrated success selling to start-ups, major OEMs, R&D engineers, purchasing departments and senior management, • Exceptional communication and problem-solving skills, • Ability to plan and organize independently, • Must be able to read, write and speak English, • Must be proficient with Microsoft Office Word, Excel, and PowerPoint (SFDC a plus), • Willingness to travel up to 50% as needed Good to Have: • Ability to commute to Twin Cities, MN office on a hybrid basis highly preferred Salary Range: $120,000 - $185,000 annually + bonus, based on skills and experience. Cirtec Medical Corporation considers for employment and hires qualified candidates without regard to age, race, religion, color, sex, sexual orientation, gender identity, national origin, ancestry, protected veteran or disability status or any factor prohibited by law. Cirtec Medical Corporation and all of its related companies fully endorse equal opportunity for all. Cirtec Medical provides reasonable accommodation for qualified individuals with disabilities and disabled veterans in the job application process. We work to create a culture that is built on innovation, respect, transparency and communication, and hope you take pride in being a member of our team. It is Cirtecs goal to create a great work environment and to keep the company a great place to work. We offer a wide range of benefits, resources, and competitive compensation plans designed to support you at every career and life stage. Our benefits include Training and career development, Healthcare and well-being programs including medical, dental, vision, wellness and occupational health programs, Paid Time Off and 401(k) retirement savings with a company match.

At HDR, our employee-owners are fully engaged in creating a welcoming environment where each of us is valued and respected, a place where everyone is empowered to bring their authentic selves and novel ideas to work every day. As we foster a culture of inclusion throughout our company and within our communities, we constantly ask ourselves: What is our impact on the world? Each and every role throughout our organization makes a difference in our ability to change the world for the better. We believe transportation is more than movement, it's the foundation of connected, thriving communities. As part of HDR's Transportation Business Group, you'll help shape the systems that move people and goods safely, efficiently, and sustainably. This isn't just a job, it's a chance to lead progress, drive meaningful impact, and leave a legacy of smarter, more connected transportation networks. We are all employee-owners at HDR, which is the foundation of our collaborative culture that connects employees around the world. The primary duties of the Senior Rail Systems Manager include design production and technical leadership for rail systems projects pertaining to traction electrification overhead contact systems (OCS) distribution. This position is a key role within the Rail and Transit Systems Business Class. This person will have involvement in electrified rail and transit projects throughout North America and Internationally. The Manager will have specific responsibilities managing staff, planning and scheduling work, performing design, providing leadership of specific design packages for multiple projects, as well as coordinating the assembly of plans and specifications, and construction support. This position supports various rail and transit projects throughout North America to serve the contract requirements and respond to client needs. The successful candidate will have experience in developing technical specifications, criteria and drawings for AC and DC overhead contact systems, and the interfaces to traction power systems, structures and rail and bus vehicles. As such, the candidate will have the ability to pro-actively lead tasks between technical groups and be innovative in solving complex challenges. Project work will include overhead contact wire distribution design for Streetcar, Electrified Bus, Light Rail, Heavy Rail, Commuter Rail and High Speed Rail Projects operating on Overhead Contact systems. Design work would include overhead contact system components, layouts and calculations needed for equipment sizing and allocation, general arrangements, typicals, and allocation drawings. Project management work will include client needs coordination, scoping, fee preparation, scheduling, budget tracking, and delivery of work products. Work location would include both Home Office and short term travel to cities installing or planning to install Electrified Transit Systems. Long term field assignments may also be available. Individual must be technically competent, with recognized rail specialization that resolves problems of significant scope and complexity. The individual should have industry standing in technical committees in the electrification field, and have established relationships with rail and transit clients throughout North America. In addition to performing design work by themselves, the Individual will be required to plan, organize, and coordinate work of small to medium group of professionals and technicians. Past experience with direct client interface and complete project life-cycle (design to commissioning) is highly desirable. Preference given to candidates with experience in the NY/NJ Transit Market. Bachelor's degree or equivalent experience. A minimum of 7 years experience. Professional registration, license or certification may be required based on role. Strong communication and listening skills. Ability to handle multiple assignments. Good leadership and organizational skills. An attitude and commitment to being an active participant of our employee-owned culture is a must. HDR is our company. Together, we build on each other's life experiences and perspectives to make great things possible every day. This shapes our collaborative culture, encourages organizational trust and connects us closer to the clients and communities we serve. Our Commitment As employee owners, we all have a role in creating an inclusive environment where each of us is welcomed, valued, respected and empowered to bring our authentic selves to work every day. Our eight Employee Network Groups (Asian Pacific, Black, Hispanic/Latino(a), LGBTQ+, People with Disabilities, Veterans, Women, Young Professionals) help create a sense of belonging and foster a supportive environment where everyone is empowered to engage and contribute. Each group has an executive sponsor and is open to all employees. We provide a comprehensive benefits package that promotes employee ownership, employee health, performance, and success, which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time away, parental leave, paid holidays, a retirement savings plan with employer match, employee referral bonus and tuition reimbursement. The expected compensation range for this position depends upon skills, experience, education and geographical location. (Stated benefits are for full-time regular positions. Temporary and part-time roles eligible for limited benefits.) {New York City}: $137,463- $196,375

Job Description We are seeking a caring person that enjoys working with an equally caring team. Our production area is clean, organized, secure and safe. The responsibilities include kitting and assembly of infant ID kits to protect babies from being switched in hospitals. Kits include numbered sterile umbilical cord clamps, matched numbered wristbands, matched stick-on labels, crib cards and instruction manual. The kits will vary based upon client and project. Other responsibilities include some computer work and some general warehouse duties such as picking, packing, shipping, receiving and inventory management. This is not your typical warehouse job. We offer you a caring, mutually respectful environment that large companies can only dream about. We have created an extremely safe and clean environment to protect you and your family from COVID. In this position you will be responsible for a few different roles. You will be assembling kits and you will also be responsible for database entry of your kits. We will teach you what is necessary, but it is important that you have some computer experience. Your attention to detail is particularly important in this position. \nCompany Description Divergent Medical has been in the Infant Security and Infant Identification for 13 years. Basically, we work with hospitals to help protect their babies from being switch and or abducing while in the hospitals care. We love what we do because we know we are helping others. Divergent Medical has been in the Infant Security and Infant Identification for 13 years. Basically, we work with hospitals to help protect their babies from being switch and or abducing while in the hospitals care. We love what we do because we know we are helping others.

Join Weiss-Aug A Leader in Precision Manufacturing and Innovation Be part of a company that's shaping the future of manufacturing where your ideas, skills, and passion matter. Weiss-Aug, is a leading provider of advanced manufacturing and engineering solutions with advanced facilities across the U.S. and Mexico for over 50 years. Why Join Us? At Weiss-Aug we are driven by a commitment to excellence, innovation, and continuous improvement. As a recognized leader in the industrial and commercial sectors, specializing in high-volume metal stamping, thermoplastic molding, and value-added assembly solutions our Weiss-Aug MedPharma serves the medical device and life science industry, offering unparalleled vertically integrated manufacturing solutions, partnered with in-house product design and engineering services. These combined capabilities provide Weiss-Aug a strategic advantage over the competition, being able to offer our customers a true, single-source supplier option, to meet their most challenging product innovation needs. As we continue to push the boundaries of what is possible, including our latest advancements in materials science, specialty coatings, laser processing, and hybrid additive manufacturing technologies Weiss-Aug MedPharma needs the best minds in industry. Expanding our team is paramount, bringing in fresh perspectives, ideas and broad-based talent to further enhance our solution offerings, driving new growth and supporting our technology roadmap including the release of finished drug-delivery / combination devices and machined implants. We're currently seeking a passionate and skilled Quality Systems Manager Medical Device Manufacturing to join our team and contribute to our mission of delivering high-quality, engineered solutions to our customers worldwide. In this role you will be responsible to lead, maintain, and continuously improve our Quality Management System (QMS) in alignment with ISO 13485, 21 CFR Part 820, and global medical device regulatory expectations. This role is ideal for a hands-on, detail-driven quality leader who has successfully implemented ISO 13485 certification and managed FDA Establishment Registration and device listing activities for manufacturing sites. The Quality Systems Manager will serve as the site's primary owner of QMS compliance, internal/external audits, and regulatory readiness, ensuring that our operations meet the highest standards of safety, quality, and reliability. Responsibilities • Lead, maintain, and enhance the company's ISO 13485compliant Quality Management System, ensuring alignment with FDA QSR and applicable global regulations., • Drive and manage ISO 13485 certification, surveillance audits, and recertification cycles., • Oversee and execute FDA Site Registration, and ongoing regulatory maintenance for the manufacturing site., • Serve as the primary point of contact for regulatory bodies, notified bodies, and customer quality audits., • Manage core QMS processes including: document control, CAPA, nonconformance management, supplier quality, internal audits, training systems, and risk management (ISO 14971)., • Lead cross-functional teams to investigate quality issues, implement corrective actions, and drive continuous improvement., • Ensure manufacturing processes remain validated, controlled, and compliant with regulatory expectations., • Develop and deliver quality training across the organization to strengthen quality culture and compliance awareness., • Prepare and present quality metrics, audit findings, and compliance status to senior leadership Requirements • Bachelor's degree in Engineering, Quality, or related field., • 10+ years of experience in medical device manufacturing quality systems, with direct ownership of QMS processes., • Demonstrated experience implementing ISO 13485 and successfully achieving certification., • Hands-on experience completing FDA Establishment Registration, • Strong working knowledge of 21 CFR Part 820, ISO 13485, and applicable regulatory guidance., • Proven success leading internal and external audits., • Excellent communication, documentation, and cross-functional leadership skills. Preferred Qualifications • Experience in injection molding, assembly, machining, or other precision manufacturing environments., • ASQ certifications (CQE, CQA, CMQ/OE) or equivalent., • Familiarity with electronic QMS platforms. This position is at our Fairfield, NJ location. Other Benefits Include • Medical, Dental and Vision, • 401 (k) with company match, • Holiday, Vacation and Sick Time, • Tuition Reimbursement, • Health Savings Accounts (HAS), • Flexible Spending Accounts (FSA), • Cigna Wellness Incentive Program, • Employee Assistance Program (EAP), • Short Term Disability, • Group Life and Accidental Insurance, • Sun Life Accident, Critical Illness, and Hospital Indemnity Insurance, • Smoking Cessation Program, • Pet Insurance US Pay Transparency The base salary for this role will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. If your salary requirements exceed the advertised range and you remain interested in Weiss-Aug, we encourage you to apply. Weiss-Aug is an Equal Opportunity/Affirmative Action Employer. Applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, protected veteran status, disability, or any other characteristics protected by applicable federal, state, or local law.

Job Description HIRING IMMEDIATELY: WAREHOUSE LOADER IN ELIZABETH, NJ Accurate Personnel is hiring immediately for Warehouse Loader to join our client in Elizabeth, NJ. Warehouse Workers will load/unload delivery vehicles, assist with the assembly of products, and assist with general labor warehouse tasks. Previous experience as a Warehouse Associate / Forklift Operator / or Order Picker completing warehouse general labor tasks in a mass retail warehouse-style setting is preferred. Earn great weekly pay and enjoy excellent benefits! Warehouse Associate Pay, Schedule, and Location • Starting at $18/hour, paid weekly, • Excellent benefits package: Medical, Dental, and Vision, • 2nd shift schedule available, • Located in Elizabeth, NJ Warehouse Associate Duties and Responsibilities • Secure goods to pallets and transport around the warehouse, • Pick and pull orders for shipments, • Assist with the assembly process, • Inspect products and ensure they meet quality standards, • Maintain a clean and orderly work area Warehouse Associate Requirements and Qualifications • Previous experience as a Warehouse Associate is preferred, • Experience in a mass retail style warehouse is preferred, but not required, • Ability to serve as a forklift operator / material handler /or Order Picker is beneficial ----- (Salary range based on experience) —-- ABOUT ACCURATE PERSONNEL Do you need your next job fast? Accurate Personnel is here to help! As an industry leading full service staffing agency, we have all the tools you need to start earning that next paycheck soon. Send us your application and our team will instantly get to work on finding you the right placement to fit your needs. Accurate Personnel has been a provider of temporary job services and direct hire search for 45 years. Our expertise has allowed us to grow from a regional Chicagoland office into a nationwide search firm that services over 500 clients while never losing sight of personalized service. Let Accurate work for you. Apply with us today! ----- Accurate Personnel provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

At Panera Bread, we believe every guest deserves our best. As a Restaurant Team Member, you’ll be the heart of hospitality- bringing warmth, care, and joy to every interaction. Restaurant Team Members have the special opportunity to connect with our amazing guests, directly impact the bakery-cafe’s growing business, and most importantly serve local communities across the country. Support in bringing Panera warmth to life and help ensure every guest receives our best. By sharing a warm welcome, delivering food with gratitude, always looking for ways to help, building personal connections, and finding moments to surprise and delight, you help create meaningful experiences that keep guests coming back. Responsibilities As a Restaurant Team Member, you will be an ambassador for bringing Panera Warmth to life with each guest interaction, delivering excellent services in every circumstance. Your daily responsibilities will include, but are not limited to: • Restaurant Team Members will execute the duties for their specific areas within the bakery-cafe (e.g., Production, Prep, Service, Cashier, Expo, Drive-Thru, Barista, Guest Experience Champion, QC, etc.)., • Greet every guest with genuine warmth and enthusiasm., • Assemble fresh salads, soups, and sandwiches with care, accuracy, and efficiency – no assembly lines, just real ingredients and great food., • Stay on the move – assist guests at entry, cashier, and dining areas., • Maintain a clean, safe, and inviting environment by following food safety standards and cleaning protocols., • Be informed about daily priorities and adapt to changes with a positive attitude – every guest gets our best., • Support team success by completing cleaning and stocking duties and helping set up the next shift. What’s In It for You • Competitive pay & eligible for team tips, • Free on-shift meals & unlimited fountain beverages, • Flexible, reliable scheduling, • Paid vacation, sick time, and holidays (for full-time team members), • Medical, dental, vision, life insurance, pet insurance & 401(k) with match available, • Career advancement & leadership development opportunities, • Tuition discounts, • Perks & rewards for team members, • Team member assistance program This Opportunity Is for You If • You meet the minimum age requirement (16+) and can lift up to 25 lbs. and stand for extended periods., • Must be able to clearly communicate and quickly understand guests, managers, and team members’ directions in a loud environment., • You have strong interpersonal skills and love making people smile., • You’re passionate about creating moments of comfort, connection, and joy for every guest., • You thrive in a fast-paced environment and can multitask with ease., • You’re reliable, punctual, and flexible to work evenings, weekends, and holidays., • Complete basic food safety understanding and practice training. (Food Handler’s Card, as required by law), • You enjoy working with food. (Food service experience is preferred but not required.) Equal Opportunity Employer: Disabled/Veterans Additional Description : Competitive pay: $15.92 - $19.00

Job Description Overview WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: $45-$58 depending on experience, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Enroll in Medical Coverage Starting at $0 Per Paycheck, paid vacation/holidays, and a 401(K) match, • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities • Must be thoroughly familiar and have detailed knowledge of all aspects of our product offerings including CHP and Balance of Plant (including not limited to HRSG, radiators, steam/hydronic boiler, absorption chiller, chiller, standby generators, automatic transfer switches, switchgear), island and parallel operation, Comap control system, Building Management Systems, all regarding assembly, repair, wiring, re-building, testing, and troubleshooting., • Regularly travel to jobsite locations to perform preventive maintenance, corrective maintenance, unscheduled service, and troubleshooting, mechanical & electrical repairs on natural gas and biogas engines, generator sets, CHP power generation equipment, and related equipment., • Monitoring system performance via remote control on-line, diagnoses technical malfunctions / operator errors, and provides solutions., • Interface with system operators/field technicians and provides technical guidance., • Performance of engine overhauls, electrical & mechanical testing, calibration and commissioning., • Must provide clear and concise reports of all work performed daily for both internal and external reporting, observe and report conditions that could result in unscheduled or corrective maintenance, and communicate in a timely manner., • Maintain designated project & service records, and practice consistent record keeping., • Contribute to a pleasant and positive work atmosphere where all team members feel important and responsible., • Adapt to the diverse needs of a small team and address internal and external requirements with flexibility and creativity., • Regularly improve and update product knowledge by participating in educational and product training opportunities., • This description contains information necessary to describe and evaluate the job. It should not be construed as a detailed description of all work performed but indicates the kinds of duties and skills expected. The position must complete other work tasks as assigned. Qualifications • The candidate must have a strong reciprocating engine and electrical background with the ability to display a high level of skill and understanding regarding internal combustion engines, generator sets, ideally natural gas engines, but will consider applicants that have experience with diesel standby or other engine technologies (e.g. compression engines)., • Will also consider technicians that have a more holistic background and excellent experience and track record around complex technologies like aircraft engines and turbines., • Be able to complete technical start-up of gas engines and CHP power systems., • Independently diagnose and repair power systems., • Basic working knowledge of advanced controls, safety shut-downs, circuit breakers and control panel wiring., • Must be available to work over-time and occasionally travel on w

Job Description Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries is currently seeking Bench Technicians/Electronic Assemblers. The suitable candidate should have some experience with mechanical, electrical assemblies, some soldering experience and should be familiar with basic test equipment. This position focuses on assembling electronic equipment such soldering wires onto switches and integrating the switches into metal housings as well as packaging the finished product. You will also be integrating circuit boards into enclosures, wiring them and final testing the equipment once completed the data must be entered into a data base so basic computer skills are required. Essential Requirements: • Strong work ethic, • Minimal soldering experience, • Basic knowledge of hand tools, • Mechanically inclined, • Follow assembly & test procedures, • Maintain a safe and organized work area, • Must be able to read a wiring diagram, • Document and submit all failures of equipment to engineering QA Department, • Maintain quality control on the production of all equipment assembled, • Ensure all company equipment and tools are in proper working condition, • Maintain manufacturing records of all products Education / Experience Requirements: Qualified candidates must have some education in digital electronics and can be entry level but 1+ year of electronics assembly work is preferred as well as basic soldering skills and the knowledge of electronic test equipment such as DVM's is required. Experience with Microsoft Office and Outlook is a plus. Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life, • PTO Parabit Systems is focused on growth and growing leaders. Parabit Systems is an equal opportunity employer, offering a great work environment, and challenging career opportunities. Please email your resume to Recruiting@Parabit.com. All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description Job Title: Electronics Inspector Shift: 1st Shift First Advantage Package Non-Exempt/Hourly Package + Supplier ran Drug Screen OR Non-Exempt/Hourly with Drug Package AND Education Verification (can be verified by supplier or a la carte screen) Join a Team That Takes Quality Seriously Are you passionate about electronics, quality, and making sure products work exactly as intended Do you enjoy hands-on work, problem-solving, and being the final checkpoint before products reach customers We're looking for an Electronics Inspector & Final Test Technician to join our growing manufacturing team. As a key member of our Quality team, you'll inspect electronic assemblies, perform functional testing, and help ensure every product meets customer expectations and company standards. What You Will Do Inspect electronic components, PCB assemblies, cable assemblies, and finished products Verify workmanship, solder quality, component placement, labeling, and overall assembly compliance Conduct incoming, in-process, and final inspections Perform functional and electrical testing of completed assemblies Document inspection and test results accurately Identify and escalate quality issues when needed Follow ESD control, quality, and safety procedures Required Qualifications High School Diploma or GED Experience in electronics manufacturing, inspection, testing, or quality assurance Ability to read assembly drawings, work instructions, and technical documentation Strong attention to detail and organizational skills Preferred Qualifications IPC-A-610 Certification IPC J-STD-001 Certification Experience with PCB assemblies and electronic test equipment Experience in an ESD-controlled environment Why Join Us Quality is part of everything we do. We offer a collaborative environment where employees are empowered to make an impact, contribute ideas, and grow professionally. Competitive compensation Medical, dental, and vision coverage 401(k) with company match Paid vacation and holidays Career growth opportunities

Job Description Join a Team Trusted Worldwide for Mission-Critical Solutions For more than 80 years, Bergen Cable Technology has been a trusted manufacturer of high-precision wire rope and cable assembly solutions serving aerospace, defense, spacecraft, robotics, medical, transportation, and emerging technology industries. From aircraft flight control cables to highly engineered custom assemblies, our products support some of the world's most demanding applications where precision, quality, and reliability are critical. Why Join Bergen? At Bergen Cable, we're proud of the products we manufacture and the industries we support, but what truly sets us apart is our people. As a company with over eight decades of history, we've maintained an entrepreneurial spirit and collaborative culture while continuing to invest in the people and technology that drive our success. Here, employees are valued, supported, and empowered to make a meaningful impact. What You Can Expect • Meaningful work supporting mission-critical industries, • A collaborative, team-oriented culture built on respect and accountability, • Leaders who invest in employee development and long-term career growth, • Opportunities to contribute ideas and drive continuous improvement, • The chance to be part of a company with a proven legacy of quality, innovation, and customer success What Value This Role Will Bring As a Cable Assembler, you will manufacture precision cable assemblies used in critical industry applications. This role is responsible for assembling components to exact specifications, operating specialized production equipment, conducting inspections, and ensuring quality, accuracy, and consistency throughout the manufacturing process. Key Responsibilities • Build precision cable assemblies using wire rope, conduit, fasteners, and related components, • Operate rotary swagers, hydraulic and pneumatic presses, grinders, and load testing equipment, • Utilize measuring tools such as calipers, micrometers, and tape measures to verify dimensional accuracy, • Interpret production drawings, work instructions, and product specifications, • Perform in-process inspections and maintain quality standards throughout production, • Communicate production status, material concerns, and non-conformances with leadership as needed Required Qualifications • High School Diploma or GED, • Minimum 3 years of assembly, manufacturing, or production experience, • Strong mechanical aptitude and attention to detail, • Ability to work safely and efficiently in a fast-paced manufacturing environment, • Ability to lift up to 55 pounds and stand or sit for extended periods, • Ability to interpret engineering drawings Preferred Qualifications • Experience operating hydraulic presses and shop equipment, • Experience using precision measuring instruments Why Employees Thrive at Bergen • Successful employees at DMC typically demonstrate:, • Customer focus, • Accountability and integrity, • Commitment to quality and precision, • Strong teamwork and communication skills, • Adaptability and continuous learning, • Initiative and a problem-solving mindset Compensation & Benefits Pay Range: $23.00-$34.00 per hour Benefits Include • Comprehensive Medical, Dental, and Vision Insurance plans, • 401(k) with 100% Company Match up to 4% – no vesting schedule, • Paid Time Off, • 9 Paid Holidays, • Company-Paid Life Insurance & Long-Term Disability, • Professional Development Opportunities Position Details • Fairfield, New Jersey; On-site attendance required, • First Shift – Monday – Thursday: 7:00AM – 3:30PM Friday: 6:30AM-3:00PM, • PPE required (safety glasses and hearing protection in designated areas) Ready to Build What's Next? If you're looking for an opportunity to contribute to innovative solutions, work alongside talented professionals, and build a rewarding career with a company that values growth, teamwork, and excellence, we encourage you to apply today. Bergen Cable Technology is an Equal Opportunity Employer, including disability and protected veterans. Employee Spotlight “Everyone gets along, and work is safe and efficient. A clean place that treats all workers with respect.” -- Packing & Shipping Associate

Job Description Join a Team Trusted Worldwide for Mission-Critical Solutions For more than 80 years, Bergen Cable Technology has been a trusted manufacturer of high-precision wire rope and cable assembly solutions serving aerospace, defense, spacecraft, robotics, medical, transportation, and emerging technology industries. From aircraft flight control cables to highly engineered custom assemblies, our products support some of the world's most demanding applications where precision, quality, and reliability are critical. Why Join Bergen? At Bergen Cable, we're proud of the products we manufacture and the industries we support, but what truly sets us apart is our people. As a company with over eight decades of history, we've maintained an entrepreneurial spirit and collaborative culture while continuing to invest in the people and technology that drive our success. Here, employees are valued, supported, and empowered to make a meaningful impact. What You Can Expect • Meaningful work supporting mission-critical industries, • A collaborative, team-oriented culture built on respect and accountability, • Leaders who invest in employee development and long-term career growth, • Opportunities to contribute ideas and drive continuous improvement, • The chance to be part of a company with a proven legacy of quality, innovation, and customer success What Value This Role Will Bring As a Safety Cable Assembler, you will support the production of Safety Cable products through a variety of manufacturing processes, including ferrule loading, cable grinding, and crimping operations. You'll be responsible for operating equipment, performing quality inspections, and ensuring products meet dimensional, visual, and safety requirements. This role plays a critical part in maintaining product quality, production efficiency, and customer satisfaction. Key Responsibilities • Operate automated equipment used in the Safety Cable assembly process, including ferrule loading systems and cable processing equipment., • Load ferrule magazines to required quantities and verify proper orientation and machine operation throughout the production run., • Grind Safety Cable ends to required specifications using manual-guided grinding equipment while monitoring product quality and dimensional accuracy., • Set up and adjust crimping equipment based on part numbers, tooling requirements, and product specifications., • Conduct visual and dimensional inspections throughout the manufacturing process to ensure compliance with quality standards. Required Qualifications • High School Diploma or GED preferred., • Strong attention to detail., • Ability to operate automated, pneumatic, and mechanical equipment safely., • Ability to read and interpret part numbers, basic measurements, and technical work instructions, • Ability to lift up to 55 pounds and stand or sit for extended periods Preferred Qualifications • Previous manufacturing, production, or assembly experience., • Experience operating automated or pneumatic equipment., • Experience performing quality inspections and working from production instructions. Why Employees Thrive at Bergen Successful employees at Bergen typically demonstrate: • Customer focus, • Accountability and integrity, • Commitment to quality and precision, • Strong teamwork and communication skills, • Adaptability and continuous learning, • Initiative and a problem-solving mindset Compensation & Benefits Pay Range: $18.50 - $25.00 Shift Differential - $3.00 per hour Benefits Include • Comprehensive Medical, Dental, and Vision Insurance plans, • 401(k) with 100% Company Match up to 4% – no vesting schedule, • Paid Time Off, • 9 Paid Holidays, • Company-Paid Life Insurance & Long-Term Disability, • Professional Development Opportunities Position Details • Fairfield, New Jersey; On-site attendance required, • Second Shift – Monday- Friday: 3:30PM – 12:00AM, • PPE required (safety glasses and hearing protection in designated areas) Ready to Build What's Next? If you're looking for an opportunity to contribute to innovative solutions, work alongside talented professionals, and build a rewarding career with a company that values growth, teamwork, and excellence, we encourage you to apply today. Bergen Cable Technology is an Equal Opportunity Employer, including disability and protected veterans. Employee Spotlight “Everyone gets along, and work is safe and efficient. A clean place that treats all workers with respect.” — Packing & Shipping Associate

Job Description Job Title: Assembler Location: Riverdale, New Jersey Type: Contract To Hire Compensation: $19.25 to $20.25 hourly Contractor Work Model: Onsite – onsite Hours: 2nd Shift (4PM to 12:30AM) Responsibilities: • Assemble and test new and developing product lines by following engineering drawings and instructions from the Assembly Manager and Engineering Department using various tools and fixtures., • Maintain the Riverdale Assembly areas in a clean and orderly fashion., • Assemble products using hands and/or basic tools in a timely manner., • Test products as per written instructions safely and effectively., • Utilize digital systems effectively for all assembly tasks, including logging items in and out., • Maintain accurate counts of assembled items., • Follow detailed written and verbal instructions and understand basic engineering concepts and units of measure (pressure, length, flow rate, etc.). Qualifications: • High School Diploma or equivalent, with technical school experience beyond High School (certification or degree preferred)., • Basic Math Skills (counting, measuring, use of calculator)., • Ability to maintain a clean working environment and perform the job with minimal supervision., • Strong attention to detail and ability to handle small pieces., • Ability to work productively and safely in a production environment., • Contribute ideas and help implement production optimization strategies. System One, and its subsidiaries including Joulé, Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref: #562-Joule Staffing - Edison

Job Description Apprentice Plumber (ID# 662) Full-Time | Multiple Locations Nationwide About Our Client Our Client is a fast-growing, full-service plumbing franchise. We provide expert residential, commercial, and industrial plumbing, drain, and sewer solutions with same-day service and 24/7 emergency availability. Our team of certified professionals is committed to quality workmanship, upfront pricing, and outstanding customer care. Position Overview We are seeking a motivated Apprentice Plumber to join our growing team. This is an excellent opportunity to launch your plumbing career by learning hands-on from experienced Journeyman and Master Plumbers in a supportive, fast-paced environment. You will earn while you learn, gaining the real-world skills and training needed to advance toward your Journeyman license. Key Responsibilities • Assist Journeyman and Master Plumbers with the installation, repair, and maintenance of plumbing systems including pipes, fixtures, drains, sewers, and water heaters, • Perform basic plumbing tasks such as pipe cutting, fitting assembly, and fixture installation under direct supervision, • Transport tools, equipment, and materials to and from job sites, • Maintain a clean, organized, and safe work environment on all job sites, • Follow all safety protocols, building codes, and company procedures, • Support senior plumbers with emergency service calls as needed, • Complete required classroom or technical training as part of an apprenticeship program, • Maintain accurate records of work performed and materials used, • Communicate professionally with customers and team members Qualifications • High school diploma or GED required, • Enrollment in or willingness to enroll in a licensed plumbing apprenticeship program, • Basic mechanical aptitude and eagerness to learn the trade, • Ability to follow instructions and work effectively as part of a team, • Strong work ethic, reliability, and punctuality, • Valid driver's license with a clean driving record, • Ability to lift up to 75 lbs and work in confined spaces, at heights, or outdoors in varying weather conditions, • Prior construction, maintenance, or trade experience a plus but not required Compensation • Base salary: $34,000 – $47,500 per year, depending on experience and location, • Hourly equivalent: $16 – $23/hour, with increases as apprenticeship milestones are met, • Top earners in high-demand markets: up to $56,500+, • Overtime pay available (1.5x standard rate), • Pay increases tied to apprenticeship progression Benefits • Medical, dental, and vision insurance, • Paid time off and holidays, • Company-provided vehicle or vehicle allowance, • Uniforms and equipment supplied, • Paid on-the-job training, • Tuition/apprenticeship program support, • Clear career path to Journeyman and Master Plumber, • Career advancement opportunities Why Our Client? We believe in building careers from the ground up. As an Apprentice Plumber with Our Client, you'll gain the hands-on experience, mentorship, and structured training needed to grow into a highly skilled, well-compensated plumbing professional — all while earning a competitive wage from day one.

Job Description Job Title: Electronics Inspector Shift: 1st Shift What You Will Do Inspect electronic components, PCB assemblies, cable assemblies, and finished products Verify workmanship, solder quality, component placement, labeling, and overall assembly compliance Conduct incoming, in-process, and final inspections Perform functional and electrical testing of completed assemblies Document inspection and test results accurately Identify and escalate quality issues when needed Follow ESD control, quality, and safety procedures Required Qualifications High School Diploma or GED Experience in electronics manufacturing, inspection, testing, or quality assurance Ability to read assembly drawings, work instructions, and technical documentation Strong attention to detail and organizational skills Preferred Qualifications IPC-A-610 Certification IPC J-STD-001 Certification Experience with PCB assemblies and electronic test equipment Experience in an ESD-controlled environment Why Join Us? Quality is part of everything we do. We offer a collaborative environment where employees are empowered to make an impact, contribute ideas, and grow professionally. Competitive compensation Medical, dental, and vision coverage 401(k) with company match Paid vacation and holidays Career growth opportunities Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services. Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.