Trabajos medical assembly en Charlotte, North CarolinaCrear alertas

Department: Status: Benefits Eligible: No Hours Per Week: 0 Schedule Details/Additional Information: Various Shifts and locations on the south side of charlotte. Essential Functions: * Possesses a thorough knowledge of aseptic technique and its application. * Assists in obtaining and organizing supplies and instruments prior, during and after surgical procedure. * Assists Registered Nurse circulator in preparation of patient, assembly of supplies, instruments, equipment and proper disposition of all specimens; assists with all aspects of room turnover. * Performs duties according to department policy and procedure. * Monitors surgical supplies for sterility prior to use and ensures that supplies are used in a judicious manner, charges are documented/submitted accurately and appropriately. * Monitors and documents sterilization activities for completion. * Attends in-services/staff meetings; exhibits knowledge of current department related issues and participates in Performance Improvement Process. * Participates in educational opportunities to increase competency and meet personal needs and goals. * Assists in the development of policies, procedures, and standards. * Serves as a preceptor and a clinical resource to others. * Assumes responsibility for individual specified unit clinical projects as required. Physical Requirements Works with occasional intermittent noise and exposure to conditions such as dust, fumes, and chemicals. Ability to communication and write. Strenuous physical effort will require walking, stretching, bending, climbing stairs, twisting, and squatting or kneeling while performing tasks. May have lengthy periods of standing. Requires frequent use of side vision, lifting, pushing, and pulling. Must be able to lift and support the weight of 35 pounds. Use of both hands and all fingers and is required to use hands for gripping, speed work and precision during the operation equipment/instruments and movement/positioning of surgical patients. Vision and hearing for distances of up to twenty 20 feet is required, depth perception and able to distinguish basic colors is required. Ability to work for lengthy, or irregular work hours, rotating shifts, working on hard surfaces, being near moving equipment, changes in temperature, humidity, and exposure to Blood Borne Pathogens. Education, Training, and Experience: Graduate of an accredited school of surgical technology required or successful completion of military training program for Surgical Technology or Operating Room Specialist. 5 years of operating room experience in surgical technologist role required. Current certification required. Meets all ST III qualifications of Surgical Tech Ladder. Pay Range $26.10 - $39.15 Our CommitmenttoYou: Advocate Health offers a comprehensive suite of Total Rewards: benefits and well-being programs, competitive compensation, generous retirement offerings, programs that invest in your career development and so much more so you can live fully at and away from work, including: Compensation • Base compensation listed within the listed pay range based on factors such as qualifications, skills, relevant experience, and/or training, • Premium pay such as shift, on call, and more based on a teammates job, • Incentive pay for select positions, • Opportunity for annual increases based on performance Benefits and more • Paid Time Off programs, • Health and welfare benefits such as medical, dental, vision, life, andShort- and Long-Term Disability, • Flexible Spending Accounts for eligible health care and dependent care expenses, • Family benefits such as adoption assistance and paid parental leave, • Defined contribution retirement plans with employer match and other financial wellness programs, • Educational Assistance Program About Advocate Health Advocate Health is the third-largest nonprofit, integrated health system in the United States, created from the combination of Advocate Aurora Health and Atrium Health. Providing care under the names Advocate Health Care in Illinois; Atrium Health in the Carolinas, Georgia and Alabama; and Aurora Health Care in Wisconsin, Advocate Health is a national leader in clinical innovation, health outcomes, consumer experience and value-based care. Headquartered in Charlotte, North Carolina, Advocate Health services nearly 6 million patients and is engaged in hundreds of clinical trials and research studies, with Wake Forest University School of Medicine serving as the academic core of the enterprise. It is nationally recognized for its expertise in cardiology, neurosciences, oncology, pediatrics and rehabilitation, as well as organ transplants, burn treatments and specialized musculoskeletal programs. Advocate Health employs 155,000 teammates across 69 hospitals and over 1,000 care locations, and offers one of the nations largest graduate medical education programs with over 2,000 residents and fellows across more than 200 programs. Committed to providing equitable care for all, Advocate Health provides more than $6 billion in annual community benefits. Applies advanced surgical technology skills to assist in providing patient care in the surgical suite while maintaining a safe work environment and performing all related job responsibilities. Ensures quality patient care during the operative procedure and is constantly on vigil for maintenance of the sterile field.\n\nFacilities in south Charlotte: Pineville, Union, Union West, and southern Ambulatory locations.

Department: Status: Benefits Eligible: Yes Hours Per Week: 40 Schedule Details/Additional Information: Essential Functions: * Possesses a thorough knowledge of aseptic technique and its application. * Assists in obtaining and organizing supplies and instruments prior, during and after surgical procedure. * Assists Registered Nurse circulator in preparation of patient, assembly of supplies, instruments, equipment and proper disposition of all specimens; assists with all aspects of room turnover. * Performs duties according to department policy and procedure. * Monitors surgical supplies for sterility prior to use and ensures that supplies are used in a judicious manner, charges are documented/submitted accurately and appropriately. * Monitors and documents sterilization activities for completion. * Attends in-services/staff meetings; exhibits knowledge of current department related issues and participates in Performance Improvement Process. * Participates in educational opportunities to increase competency and meet personal needs and goals. * Assists in the development of policies, procedures, and standards. * Serves as a preceptor and a clinical resource to others. * Assumes responsibility for individual specified unit clinical projects as required. Physical Requirements Works with occasional intermittent noise and exposure to conditions such as dust, fumes, and chemicals. Ability to communication and write. Strenuous physical effort will require walking, stretching, bending, climbing stairs, twisting, and squatting or kneeling while performing tasks. May have lengthy periods of standing. Requires frequent use of side vision, lifting, pushing, and pulling. Must be able to lift and support the weight of 35 pounds. Use of both hands and all fingers and is required to use hands for gripping, speed work and precision during the operation equipment/instruments and movement/positioning of surgical patients. Vision and hearing for distances of up to twenty 20 feet is required, depth perception and able to distinguish basic colors is required. Ability to work for lengthy, or irregular work hours, rotating shifts, working on hard surfaces, being near moving equipment, changes in temperature, humidity, and exposure to Blood Borne Pathogens. Education, Training, and Experience: Graduate of an accredited school of surgical technology required or successful completion of military training program for Surgical Technology or Operating Room Specialist. 5 years of operating room experience in surgical technologist role required. Current certification required. Meets all ST III qualifications of Surgical Tech Ladder. Pay Range $26.10 - $39.15 Our CommitmenttoYou: Advocate Health offers a comprehensive suite of Total Rewards: benefits and well-being programs, competitive compensation, generous retirement offerings, programs that invest in your career development and so much more so you can live fully at and away from work, including: Compensation • Base compensation listed within the listed pay range based on factors such as qualifications, skills, relevant experience, and/or training, • Premium pay such as shift, on call, and more based on a teammates job, • Incentive pay for select positions, • Opportunity for annual increases based on performance Benefits and more • Paid Time Off programs, • Health and welfare benefits such as medical, dental, vision, life, andShort- and Long-Term Disability, • Flexible Spending Accounts for eligible health care and dependent care expenses, • Family benefits such as adoption assistance and paid parental leave, • Defined contribution retirement plans with employer match and other financial wellness programs, • Educational Assistance Program About Advocate Health Advocate Health is the third-largest nonprofit, integrated health system in the United States, created from the combination of Advocate Aurora Health and Atrium Health. Providing care under the names Advocate Health Care in Illinois; Atrium Health in the Carolinas, Georgia and Alabama; and Aurora Health Care in Wisconsin, Advocate Health is a national leader in clinical innovation, health outcomes, consumer experience and value-based care. Headquartered in Charlotte, North Carolina, Advocate Health services nearly 6 million patients and is engaged in hundreds of clinical trials and research studies, with Wake Forest University School of Medicine serving as the academic core of the enterprise. It is nationally recognized for its expertise in cardiology, neurosciences, oncology, pediatrics and rehabilitation, as well as organ transplants, burn treatments and specialized musculoskeletal programs. Advocate Health employs 155,000 teammates across 69 hospitals and over 1,000 care locations, and offers one of the nations largest graduate medical education programs with over 2,000 residents and fellows across more than 200 programs. Committed to providing equitable care for all, Advocate Health provides more than $6 billion in annual community benefits. Applies advanced surgical technology skills to assist in providing patient care in the surgical suite while maintaining a safe work environment and performing all related job responsibilities. Ensures quality patient care during the operative procedure and is constantly on vigil for maintenance of the sterile field.

A Snapshot of Your Day The rotor balancer sets up and operates balance facilities for balancing and testing large generator rotors, exciter rotors, large & industrial steam turbine rotors, and large gas turbine rotors. At the start of shift, you meet with your team and supervisor to talk about safety, job assignments, and shift goals. Fifteen minutes later you are at your assigned balance facility and continue where the previous shift left off, setting up a large generator rotor for balance. You finish assembling the oil seals on the bearing pedestals and start setting up the vibration probes. By the end of shift you have moved the rotor into the balance facility and have connected the drive shaft and oil lines. You’ve completed all the required safety and quality checks and filled out the electronic quality control documents. The setup operations are complete, and the rotor is ready to start balancing operations. Before the end of shift, you leave shop notes in the electronic production system for the next shift. How You’ll Make an Impact • Setup rotors for balance testing by installing tooling, bearings, bearing pedestals, adapter plates, oil seals, and vibration probes and then connecting to controls system, fuel system, lube systems, etc. per job documentation, process or engineering specifications., • Follow Siemens Energy established procedures to operate the balance facilities; performing required tests, reading results, and recording data according to specifications., • Calculate balance weight moves using computers and/or manual drawing vectors., • Interpret detailed drawings/sketches, blueprints, manufacturing specifications, etc., • An associate’s degree, or a high school degree with 3+ years of experience in manufacturing/industrial/assembly operations with strong mathematical knowledge, • Ability to pass Siemens Energy balancer / math competency exam, • Ability to read and interpret complicated drawings, specifications, charts, and tables and to use precision measuring instruments, • Ability to obtain fork truck and crane license through Siemens Energy internal certification programs, • Successful applicants must be able to obtain Silver Level or higher ACT® WorkKeys® National Career Readiness Certificate Offers of employment are contingent upon successful completion of a criminal background check, pre-employment drug screen, and any other test(s) required for the role. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards • Career growth and development opportunities, • Supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match, • Family building benefits

Crane Operator – Large Generator Rotors A Snapshot of Your Day A Crane Operator applies overhead beam cranes to move large generator rotors (15 to 300 tons) to various stands, rolls, and machines throughout the production process. How You’ll Make an Impact • Safely rig, lift, transport, and load generator rotors onto fixed stands, roller stands, and machines, such as lathes and horizontal boring mills., • Regularly inspect lifting equipment, • Assist with mechanical hand skills tasks in other work areas of the department such as rotor winding, assembly, and balance on an as-needed basis, • Engage in continuous improvement by applying 5S methodology as a component of a Lean production system.What You Bring, • High school degree or equivalent experience with 1+ years of crane operating experience, • Working knowledge of common hand tools, • Must be able to obtain critical lift crane operation certification through Siemens Energy internal certification programs, • Must be able to obtain fork truck certification through Siemens Energy internal certification programs, • Successful applicants must be able to obtain Silver Level or higher ACT® WorkKeys® National Career Readiness Certificate Offers of employment are contingent upon successful completion of a criminal background check, pre-employment drug screen, and any other test(s) required for the role. About the Team Our Large Generator Rotor Operations team is responsible for manufacturing large electric generator rotors weighing up to 275 tons. We operate within the Large Generator team to supply new 150 – 1000 megawatt generators to power plants all over the world. In addition to manufacturing new rotors, we also service generator rotors by providing inspections, rewinds, modernizations, and upgrades. Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards • Career growth and development opportunities, • Supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match, • Family building benefits

Rotor Winder – Large Generator Rotors A Snapshot of Your Day Join our dynamic team as a Generator Rotor Winder, where you will play a crucial role in assembling copper coils onto large generator rotors. Imagine forming, brazing, and insulating these coils to create a powerful electromagnetic field essential for operation. You will fit and install composite blocking between the copper end arcs and secure wedges in the rotor body, ensuring the coils are held firmly in place. Throughout your day, you will conduct essential safety and quality checks, meticulously filling out electronic quality control documents to maintain our high standards. How You’ll Make an Impact • Perform rotor winding tasks including winding, brazing, insulating, blocking, wedging, and assembling, • Work on both new rotors and refurbishment of service rotors, • May assist in hand skill areas with tasks such as assembly of shrunk-on components and deburring machined parts, • Engage in continuous improvement by applying 5S methodologyWhat You Bring, • High school degree or equivalent with 1+ years of experience in manufacturing/industrial/assembly operations and the ability to read and interpret drawings, specifications, charts, and tables, • Working knowledge of common hand tools and ability to use precision measuring instruments, • Must be able to obtain copper brazing and ultrasonic examination certifications through Siemens Energy internal certification programs, • Must be able to obtain fork truck and crane license through Siemens Energy internal certification programs, • Successful applicants must be able to obtain Silver Level or higher ACT® WorkKeys® National Career Readiness Certificate Offers of employment are contingent upon successful completion of a criminal background check, pre-employment drug screen, and any other test(s) required for the role. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards • Career growth and development opportunities, • Supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match, • Family building benefits

A Snapshot of Your Day The rotor balancer sets up and operates balance facilities for balancing and testing large generator rotors, exciter rotors, large & industrial steam turbine rotors, and large gas turbine rotors. At the start of shift, you meet with your team and supervisor to talk about safety, job assignments, and shift goals. Fifteen minutes later you are at your assigned balance facility and continue where the previous shift left off, setting up a large generator rotor for balance. You finish assembling the oil seals on the bearing pedestals and start setting up the vibration probes. By the end of shift you have moved the rotor into the balance facility and have connected the drive shaft and oil lines. You’ve completed all the required safety and quality checks and filled out the electronic quality control documents. The setup operations are complete, and the rotor is ready to start balancing operations. Before the end of shift, you leave shop notes in the electronic production system for the next shift. How You’ll Make an Impact • Setup rotors for balance testing by installing tooling, bearings, bearing pedestals, adapter plates, oil seals, and vibration probes and then connecting to controls system, fuel system, lube systems, etc. per job documentation, process or engineering specifications., • Follow Siemens Energy established procedures to operate the balance facilities; performing required tests, reading results, and recording data according to specifications., • Calculate balance weight moves using computers and/or manual drawing vectors., • Interpret detailed drawings/sketches, blueprints, manufacturing specifications, etc., • An associate’s degree, or a high school degree with 3+ years of experience in manufacturing/industrial/assembly operations with strong mathematical knowledge, • Ability to pass Siemens Energy balancer / math competency exam, • Ability to read and interpret complicated drawings, specifications, charts, and tables and to use precision measuring instruments, • Ability to obtain fork truck and crane license through Siemens Energy internal certification programs, • Successful applicants must be able to obtain Silver Level or higher ACT® WorkKeys® National Career Readiness Certificate Offers of employment are contingent upon successful completion of a criminal background check, pre-employment drug screen, and any other test(s) required for the role. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards • Career growth and development opportunities, • Supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match, • Family building benefits

Rotor Assembler – Large Generator Rotors A Snapshot of Your Day Perform a wide variety of mechanical assembly and disassembly tasks to manufacture new apparatus generator rotors and service existing equipment. Primarily responsibilities involve using induction equipment and industrial ovens to heat components for thermal shrink fit assembly and disassembly. How You’ll Make an Impact • Install thermal shrink fit components on large generator rotors using ovens and specialized tools., • Disassemble thermal shrink fit components by using induction heating equipment, specialty tools, and generator industrial hand tools., • Additional hand-skill tasks include prepping rotor shafts for blasting operations, cleaning rotor shafts after blasting and NDE operations, deburring machined parts, and fitting rotor blower blades, • Engage in continuous improvement by applying 5S methodologyWhat You Bring, • High school degree or equivalent with 1+ years of experience in manufacturing/industrial/assembly operations, • Ability to read and interpret drawings, specifications, charts, and tables, • Working knowledge of common industrial hand tools and ability to use precision measuring instruments, • Must be able to obtain fork truck and crane license through Siemens Energy internal certification programs, • Successful applicants must be able to obtain Silver Level or higher ACT® WorkKeys® National Career Readiness Certificate Offers of employment are contingent upon successful completion of a criminal background check, pre-employment drug screen, and any other test(s) required for the role. About the Team Our Large Generator Rotor Operations team is responsible for manufacturing large electric generator rotors weighing up to 275 tons. We operate within the Large Generator team to supply new 150 – 1000 megawatt generators to power plants all over the world. In addition to manufacturing new rotors, we also service generator rotors by providing inspections, rewinds, modernizations, and upgrades. Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards • Career growth and development opportunities, • Supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match, • Family building benefits

A Snapshot of Your Day The rotor balancer sets up and operates balance facilities for balancing and testing large generator rotors, exciter rotors, large & industrial steam turbine rotors, and large gas turbine rotors. At the start of shift, you meet with your team and supervisor to talk about safety, job assignments, and shift goals. Fifteen minutes later you are at your assigned balance facility and continue where the previous shift left off, setting up a large generator rotor for balance. You finish assembling the oil seals on the bearing pedestals and start setting up the vibration probes. By the end of shift you have moved the rotor into the balance facility and have connected the drive shaft and oil lines. You’ve completed all the required safety and quality checks and filled out the electronic quality control documents. The setup operations are complete, and the rotor is ready to start balancing operations. Before the end of shift, you leave shop notes in the electronic production system for the next shift. How You’ll Make an Impact • Setup rotors for balance testing by installing tooling, bearings, bearing pedestals, adapter plates, oil seals, and vibration probes and then connecting to controls system, fuel system, lube systems, etc. per job documentation, process or engineering specifications., • Follow Siemens Energy established procedures to operate the balance facilities; performing required tests, reading results, and recording data according to specifications., • Calculate balance weight moves using computers and/or manual drawing vectors., • Interpret detailed drawings/sketches, blueprints, manufacturing specifications, etc., • An associate’s degree, or a high school degree with 3+ years of experience in manufacturing/industrial/assembly operations with strong mathematical knowledge, • Ability to pass Siemens Energy balancer / math competency exam, • Ability to read and interpret complicated drawings, specifications, charts, and tables and to use precision measuring instruments, • Ability to obtain fork truck and crane license through Siemens Energy internal certification programs, • Successful applicants must be able to obtain Silver Level or higher ACT® WorkKeys® National Career Readiness Certificate Offers of employment are contingent upon successful completion of a criminal background check, pre-employment drug screen, and any other test(s) required for the role. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards • Career growth and development opportunities, • Supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match, • Family building benefits

A Snapshot of Your Day The rotor balancer sets up and operates balance facilities for balancing and testing large generator rotors, exciter rotors, large & industrial steam turbine rotors, and large gas turbine rotors. At the start of shift, you meet with your team and supervisor to talk about safety, job assignments, and shift goals. Fifteen minutes later you are at your assigned balance facility and continue where the previous shift left off, setting up a large generator rotor for balance. You finish assembling the oil seals on the bearing pedestals and start setting up the vibration probes. By the end of shift you have moved the rotor into the balance facility and have connected the drive shaft and oil lines. You’ve completed all the required safety and quality checks and filled out the electronic quality control documents. The setup operations are complete, and the rotor is ready to start balancing operations. Before the end of shift, you leave shop notes in the electronic production system for the next shift. How You’ll Make an Impact • Setup rotors for balance testing by installing tooling, bearings, bearing pedestals, adapter plates, oil seals, and vibration probes and then connecting to controls system, fuel system, lube systems, etc. per job documentation, process or engineering specifications., • Follow Siemens Energy established procedures to operate the balance facilities; performing required tests, reading results, and recording data according to specifications., • Calculate balance weight moves using computers and/or manual drawing vectors., • Interpret detailed drawings/sketches, blueprints, manufacturing specifications, etc., • An associate’s degree, or a high school degree with 3+ years of experience in manufacturing/industrial/assembly operations with strong mathematical knowledge, • Ability to pass Siemens Energy balancer / math competency exam, • Ability to read and interpret complicated drawings, specifications, charts, and tables and to use precision measuring instruments, • Ability to obtain fork truck and crane license through Siemens Energy internal certification programs, • Successful applicants must be able to obtain Silver Level or higher ACT® WorkKeys® National Career Readiness Certificate Offers of employment are contingent upon successful completion of a criminal background check, pre-employment drug screen, and any other test(s) required for the role. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards • Career growth and development opportunities, • Supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match, • Family building benefits

Rotor Winder – Large Generator Rotors A Snapshot of Your Day Join our dynamic team as a Generator Rotor Winder, where you will play a crucial role in assembling copper coils onto large generator rotors. Imagine forming, brazing, and insulating these coils to create a powerful electromagnetic field essential for operation. You will fit and install composite blocking between the copper end arcs and secure wedges in the rotor body, ensuring the coils are held firmly in place. Throughout your day, you will conduct essential safety and quality checks, meticulously filling out electronic quality control documents to maintain our high standards. How You’ll Make an Impact • Perform rotor winding tasks including winding, brazing, insulating, blocking, wedging, and assembling, • Work on both new rotors and refurbishment of service rotors, • May assist in hand skill areas with tasks such as assembly of shrunk-on components and deburring machined parts, • Engage in continuous improvement by applying 5S methodologyWhat You Bring, • High school degree or equivalent with 1+ years of experience in manufacturing/industrial/assembly operations and the ability to read and interpret drawings, specifications, charts, and tables, • Working knowledge of common hand tools and ability to use precision measuring instruments, • Must be able to obtain copper brazing and ultrasonic examination certifications through Siemens Energy internal certification programs, • Must be able to obtain fork truck and crane license through Siemens Energy internal certification programs, • Successful applicants must be able to obtain Silver Level or higher ACT® WorkKeys® National Career Readiness Certificate Offers of employment are contingent upon successful completion of a criminal background check, pre-employment drug screen, and any other test(s) required for the role. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards • Career growth and development opportunities, • Supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match, • Family building benefits

Company Overview: If a culture of excellence, innovation and ownership is what you're searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve's position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Job Summary : Flowserve Charlotte repairs/supplies pump related components to the Nuclear Industry in accordance with our Quality Assurance Program. The Quality Inspector works together with Manufacturing, Quality Assurance, Customers, and Plant Management to ensure all products that are to be released from the Service Center meet and/or exceed Engineering and Quality Assurance requirements. The Quality Inspector performs his/her duties using approved procedures and/or work instructions with calibrated Measuring and Test Equipment. Inspection results are documented legibly and retained for objective quality evidence of the activities performed. The Quality Inspector works with other departments to meet facility related goals and designated performance metrics. In this role you will perform documented inspections to verify conformance of components to applicable drawings, procedures, specifications, and all applicable statutory and regulatory requirements. The Inspector is responsible for the content of the component inspection plan and project quality plan according to customer's and Flowserve's specifications. The Inspector is responsible for completing and controlling all project required QC documents throughout the component manufacturing process. The Inspector reports directly to the Facility Quality Manager. Associated Nuclear Quality Assurance Program requirements are in accordance with NQA-1, 10CFR50 App B, 10CFR21, and ASME Section III [NPT and NR accreditations]. Work schedule: Mondays to Fridays from 7 am to 3:30 pm. OT might be required. Location: Charlotte, NC. Responsibilities: • Responsible for Inspector qualifications and continuity in accordance with the quality requirements outlined in the Nuclear Quality Assurance Manual., • Complete and document dimensional inspection results on designated inspection reports using manual inspection instrumentation, engineered drawings, production orders, and other associated procedures in Charlotte and Memphis locations [primarily Charlotte], • Documenting non-conforming material utilizing our approved Non-Conformance Procedures., • Commercial Grade Dedication, • Review supplier certifications for completeness during receiving inspection and commercial grade dedication processes., • Reviewing and complete manufacturing and testing documents/procedures as required by the inspection body., • Utilization of a Keyence CMM., • Identification of material and components to maintain component traceability., • Maintain and support facility related goals such as on-time performance, first-time quality, and other associated key performance indicators., • Responsible for continuous growth and responsibility in Quality Control [i.e., operation of inspection equipment, gage calibration, and Non-Destruction Examiner qualifications such as VT, PT, and MT]., • HS Diploma / GED and 5-7 years relevant experience., • Must have expert level of knowledge on inspection equipment generally found in machining, assembly and test operations., • Ability to read/interpret machine drawings., • Ability to safely drive a forklift and operate overhead cranes., • Knowledge of the established quality standards, laws and regulations of national and international authorities., • Flexible, eager to learn, accurate, analytical with positive, can-do attitude., • Flexibility and willingness to travel (less than 10%), • Good interpersonal, communication, negotiation, analytical and presentation skills., • Problem solving skills., • Operational Excellence & High Level of Customer Service Standard., • Machinist., • Current SNT-TC-1A NDE Level II qualifications [PT, VT, and MT]., • Knowledge of welding, NDE and quality systems., • Commercial Grade Dedication experience., • Medical, Dental & Vision Insurance (including FSA and HSA options), • Life Insurance + Supplemental Life, Child, Spousal, and AD&D Insurance, • Short and Long Term Disability, • Retirement Planning, 401(k) plan, & Financial Wellness Resources, • Educational Assistance Program Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Req ID : R-16275 Job Family Group : Quality Job Family : QA Quality Assurance EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers.com as result of your disability. You can request a reasonable accommodation by sending an email to [email protected]. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Who We Are: \n At Ashley, we’re more than a business…we’re family. As the largest manufacturer of home furnishings in the world, we know what it takes to build incredible furniture and future leaders. We’re problem solvers with the grit to persevere during challenging times and innovators who won't coast when times are good. We create solutions, not excuses. And never settle for status quo. It’s the reason we’re always searching for better ways to deliver an exceptional customer experience. That's why Ashley Furniture is #1 in our industry. \n Ready to grow? You’ve come to the right place. Ashley Furniture has a “Growth Mindset”, and once you join our team, you’ll learn from the best in the business. \n \n Apply today and find your home at Ashley! \n \n Overview: \n The Automation Supervisor provides operational and systemic support to the manufacturing and automation teams. This position work directly with the operation to troubleshoot problems or issues that arise, identify enhancements for the systems or processes that automated machinery is performing, and apply continuous improvement philosophy to improve the overall workflow efficiency and standardization. This position is responsible to manage the Automation Specialists in each location \n \n What Will You Do? \n\n • Work with management and automation systems to ensure operation of autonomous machinery is meeting the business need.\n, • Physically interact with automation machinery to ensure proper operation.\n, • Troubleshoot systemic and operational issues arising from change order adjustments or enhancements; determine the root cause of the issue and/or work with IT as necessary to resolve.\n, • Collaborate with the distribution and fulfillment center management to determine key performance indicators for automated processes.\n, • Collaborate with operations management and end users to assist in the implementation of process improvement initiatives to increase productivity and safety, as well as reduce cost and waste, in all operational processes.\n, • Assist with the development and maintenance of departmental standard operating procedures (SOPs); notify appropriate personnel and assist with training as necessary.\n, • Work collaboratively with the distribution center training personnel to ensure all training materials are created, updated, and rolled out to appropriate locations. Follow the established audit system to validate the training has been completed.\n, • Gather and analyze data from the system to define issues or needed enhancements and work collaboratively to develop recommendations for solutions and/or improvements.\n, • Work directly with internal and external systems testing resource(s) to validate all new code. Ensure positive outcome of testing or make recommendations to appropriate personnel to modify new code for successful launch.\n, • Conduct User Acceptance Testing (UAT) to ensure system enhancements meet the objectives; log errors and/or defects and provide feedback as appropriate.\n, • Make employment decisions and/or recommendations on hiring, improvement plans, transfers, promotions, corrective actions, terminations, pay adjustments, etc.\n, • Coordinate and manage the work of employees by directing members of the team to meet the area’s goals. Audit regularly to ensure standard operating procedures are being adhered to.\n, • Manage employee performance and assist employees in making improvements to their performance through coaching, mentoring and administering performance reviews. Recommend, plan and/or implement employee training and skill development activities.\n, • Audit, maintain and ensure employee time-keeping and absentee records are accurate.\n, • Communicate company and departmental issues and goals and facilitate employee growth and development through weekly team meetings, regular individual employee meetings, coaching, training, and company-offered learning opportunities.\n, • Manage resources to optimize equipment, facilities, employees, methods and materials.\n, • Demonstrate the Company’s Core and Growth Values in the performance of all job functions.\n\n \n Education and/or Qualifications: \n\n • Associate’s degree in PLC Programming, Automation / Robotics, on related field, or equivalent 5 years or more relevant work experience\n, • Leadership experience of 4 or more years\n, • 5 years of PLC Programming or Automation Design/Assembly\n, • 5 years of automation maintenance experience in a manufacturing environment\n, • Knowledge of current Programmable Logic Controllers (PLCs)\n, • Knowledge and experience with 2D and 3D software\n, • Ability to read and understand blueprints and schematics\n, • Strong electrical and mechanical skillset\n, • Fabricating parts or assembling machines using hand tools\n, • Understanding of 2D electrical schematics\n, • Mechanical aptitude with good math skills\n, • Ability to use measurement tools like micrometers, calipers, dial indicators and other precision tools\n, • Understand specifications of the task at hand and the desired result by reading 2d and 3d mechanical drawings\n, • Measure using English and Metric scales\n, • Communicate and work with others as part of a team\n, • Perform multiple tasks in a fast-paced environment\n, • Strong attention to detail\n, • Excellent verbal and written communication skills\n, • Effective time management and organizational skills\n, • Work independently as well as in a team environment\n, • Document management system\n, • Analytical and problem-solving skills\n, • Maintain confidentiality\n, • Handle multiple projects simultaneously within established time constraints\n, • Proficient computer skills, including experience with Microsoft Office Suite, internet\n, • Work professionally with customers and co-workers to efficiently serve our customers, treating both with enthusiasm and respect\n, • Display empathy, understanding and patience with employees and external customers Respond professionally in situations with difficult employee/vendor/customer issues or inquiries\n\n \n Benefits We Offer: \n\n • Health, Dental, Vision, Employee Assistance Program\n, • Paid Vacation, Holidays, and Your Birthday off\n, • Generous Employee Discount on home furnishings\n, • Professional Development Opportunities\n, • Ashley Wellness Centers (location specific) and Medical Tourism\n, • Telehealth\n, • 401(k) and Profit Sharing\n, • Honesty & Integrity\n, • Passion, Drive, Discipline\n, • Continuous Improvement/Operational Excellence\n, • Dirty Fingernail\n, • Growth Focused\n\n \n To learn more about Ashley Furniture, our community engagement programs, environmental stewardship, and our core values, please visit our Corporate Social Responsibility information page: \n Corporate Social Responsibility \n We are an equal opportunity employer and provide a drug-free working environment. While Ashley appreciates the interest of all candidates only those meeting specific position requirements may be contacted. Principals Only. \n This job description does not constitute a written or implied contract of employment. The company reserves the right to revise or change job duties and responsibilities as the need arises. We are an Equal Employment Opportunity Employer.

Job Description • We are hiring immediately for full time WAREHOUSE ATTENDANT positions., • Location: Canteen - 3112 Horseshoe Lane, Charlotte, North Carolina 28208. Note: online applications accepted only., • Schedule: Full time schedule; Monday through Friday, hours may vary. More details upon interview. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Summary: Receives, stores and distributes material, tools, equipment and products. Essential Duties and Responsibilities: • Reads production schedule, customer order, work order, shipping order or requisition to determine items to be moved, gathered or distributed., • Conveys materials from receiving or production areas to storage or other designated areas., • Places materials/goods on racks, shelves and bins or in refrigerated rooms according to predetermined sequence such as size, type, style, color or product code., • Fills requisitions, work orders or requests for materials, tools or other stock items and distributes items to production workers or assembly line., • Assembles customer orders from stock and places orders on pallets or shelves; conveys orders to packing station or shipping department., • Marks materials with identifying information., • Opens bales, crates and other containers., • Records amounts of materials or items received or distributed., • Weighs or counts items for distribution within plant to ensure conformance to company standards., • Arranges stock parts in specified sequence for assembly by other workers., • Uses computer to enter records., • Compiles worksheets or tickets from customer specifications., • Drives vehicle to transport stored items or to pick up items., • Completes requisition forms to order supplies from other plant departments., • Prepares parcels for mailing., • Maintains inventory records., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. Req ID:1484225 Canteen

Job Description Create a Lasting Impression. Join the McKibbon Team! As a Laundry Attendant, you’ll play a key role in helping us deliver a clean, comfortable, and welcoming stay for every guest. You’ll ensure linens and towels are fresh and spotless, keep laundry areas organized, and support the housekeeping team with stocking and supplies — all while living the McKibbon Guiding Principles. A Day in the Life: • Shake, sort out, and inspect all linen., • Operate all washers, referring to operating manual and supervisor for specific information., • Laundry Attendant will report any malfunctioning of equipment to supervisor., • Analyze all discards of stained and torn linens., • Keep track of linen wash daily., • Assist with the assembly and delivery of prepared linens., • Report any discrepancies to your supervisor., • Complete production reports as required., • Wash empty drums and prepare them to be picked up for recycle., • Wipe down equipment at the end of the day and assist in cleanup of the area., • Additional reasonable tasks requests by management., • Support housekeeping team as needed. Requirements • Ability to read and interpret documents such as safety rules (i.e. Lockout Tag Out, JSAs), safety awareness information (MSDS), operation and maintenance instructions, and procedure manuals., • Adequate vision capabilities, including close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • Past experience working near moving mechanical parts., • The ability to work when exposed to vibration., • Ability to work in high places., • The ability to work in a loud environment., • The ability to lift and/or move from 10-50 lbs., • Fast-paced position with guest interaction., • Maintain a kind, courteous and professional demeanor to guests, clients and associates., • Must be 18+ and available weekends/holidays, • Dependable, organized, and team-oriented, • Embrace the McKibbon Guiding Principles: Think Bigger, Love Your Community, Do the Right Thing, Support Each Other, Make a Lasting Impression. Why McKibbon? We believe in our Guiding Principles: Think Bigger. Love Your Community. Do the Right Thing. Support Each Other. Make a Lasting Impression. At McKibbon, you’ll join a supportive team that values your work and helps you grow. Perks & Benefits Beyond the Basics: We know that hospitality starts from within, and that’s why we value the employee experience as much as we value our guests’ experience. From our competitive benefits package to our fun-loving spirit, we strive to create an environment that’s equal parts work and play. Our people will always be our first investment. We offer benefits and perks based on full or part time employment: Full Time Associates: • Comprehensive benefits package including medical, dental, and vision, • Life insurance, • Pet Insurance, • Short and long-term disability, • Paid time off and holidays, • Tuition assistance Financial & Occupational Wellness: All Associates • Competitive Compensation with incentives (incentives vary by position), • 401K Savings Plan with 50% matching funds, • Associate referral program, • Brand and company training classes, workshops and conferences for career growth and development (varies by position) Personal Wellness: All Associates • Fundraising matching funds program, • Team volunteer opportunities, • 24/7 chaplain services, • Exclusive hotel rate discounts Any state specific holiday, vacation or benefit requirements will apply. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other protected characteristic in accordance with applicable federal, state, and local laws.

Job Description Teguar Corporation is seeking to hire Computer Assembly Technician to join our Technical Services Team. This is a full-time temporary position with the potential to become permanent. About the Job In this role you will collaborate with… • Internal teams including Sales, Product Management, Supply Chain, and Technical Services. You will have a great impact on our medical and industrial customers by achieving realistic timelines and enabling them to succeed in their business. Your contribution is vital in establishing Teguar as more than a computer supplier, but also as a partner who will directly impact the medical and industrial community. Your main responsibility… You will process stock and customized configurations to customer specific specifications. This includes ensuring timely movement of products, providing proper communication to appropriate channels, and ensuring customer expectations are met. Core Competencies you need… • Technical understanding of computer hardware and software., • Proven experience with computer installation and customization., • High attention to detail., • Willingness to learn new and innovative skills., • Ability to prioritize and delegate work for efficiency., • Strong comfort with finding continuous improvement opportunities., • Ability to effectively communicate with all departments., • Strong drive of process completion and deadlines with the ability to resolve processing errors and issues creatively and proactively., • You are not timeline driven., • You desire to do all the work yourself, as this role is highly collaborative., • You cannot follow strict processes. Teguar is successful due to our agility to step in and make it happen., • You have no interest in technology. (Past and Future), • You cannot work with little to no supervision. Teguar Corporation is a fast-growing Inc 500 company who is a leading provider of advanced industrial and medical computer solutions. Our industrial and medical computers are specially designed to provide reliable performance in the most demanding environments and applications. Why Teguar? We’re a values-driven company that believes in family-first, excellence, integrity, agility, and customer passion. Our team is global, collaborative, and committed to building technology that powers innovation in demanding environments. Join us and become a key part of shaping the future of industrial and medical computing solutions. Requirements EDUCATION AND/OR EXPERIENCE: • Some college, certification or training from a Technical School and 0 - 6 months related experience as a Computer Service Technician, • Or a minimum 2 years of experience in lieu of education, • Bonus Plans – quarterly and annual based on performance, • 401K matching, • HRA (Health Reimbursement Account) covers medical, dental and vision expenses, • Gym membership, • Paid Holidays and PTO days, • Birthday PTO and Volunteer Day, • Culture Committee Program, • Employee Referral Bonus Program, • Modern office work environment with free drinks and snacks

Job DescriptionJob Title: Shipfitter/Stick Welder - Newport News, VA $45/hour & $140 in per diem This position is located in Newport News, Virginia!! Responsibilities: This position is located in Newport News, Virginia • Perform multi-pass tack welding using the Shielded Metal Arc Welding (SMAW) process., • Operate burning and heating equipment, specifically oxygen/propane burning torches., • Interpret complex structural assembly drawings, blueprints, and sketches, including weld symbols, material types, datum, and reference lines., • Comprehend fractional dimensions using a ruler and lay off piece parts for fabrication and assembly., • Assemble structural piece parts according to specifications with high-quality standards., • Work effectively in physically demanding environments such as shipbuilding or steel fabrication., • Ensure compliance with OSHA regulations relevant to the shipbuilding industry., • Single & Multi Pass Tack Welding, • Burning using Oxygen/Propane Burning Torch, • Heating using Oxygen/Propane Heating Torch, • Ability to read and interpret complex structural assembly drawings, blueprints, and sketches, • Ability to comprehend fractional dimensions using a ruler Join a leading shipbuilding company known for its commitment to quality and innovation. Experience the opportunity to work in a dynamic environment with cutting-edge technology and equipment. We value our employees and provide opportunities for growth and development. Work Environment: This position is located in Newport News, Virginia Work in the largest shipyard in the world, located in Southeast Virginia. The environment varies with hot and muggy summers and cool winters. Work on Navy vessels or in a shop setting, with shifts available around the clock: 1st shift (7am-3:30pm), 2nd shift (3:30-11pm), and 3rd shift (11pm-7am). Job Type & Location This is a Contract position based out of Charlotte, NC. Pay and Benefits The pay range for this position is $45.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Charlotte,NC. Application Deadline This position is anticipated to close on Dec 9, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Mechanical Drafter Charlotte, NC ProSearch Recruiting Partners, an independent franchise of the MRINetwork specializing in factory automation career recruitment is hiring for very well established automation company who needs a Mechanical Design Engineer who is highly proficient with Inventor to join its team. The Mechanical Design Engineer will provide manufacturing and engineering solutions for a dynamic array of challenging industrial automation solutions. The Mechanical Drafter will be responsible for: • Reviewing and evaluating customer supplied specifications and requirements for mechanical designs., • Designing and recommending robust, cost effective solutions that meet customer’s requirements as well as industry and safety standards., • Understanding and ensuring compliance to ANSI, ISO, OSHA, and EU (if applicable) standards in the design of safety guards, • Developing complete design requirements including, but not limited to, mathematical calculations, detailed specifications, and evaluation of materials, assemblies, and components for strength\FEA, • Designing with company standard components, components from established vendors, and utilize internal fabrication and machining capabilities., • Translating designs into accurate Bills of Materials and labor estimates., • Producing detailed quotations or offer letters that differentiate our proposals from competitors to maximize wins., • Creating and maintaining mechanical drawing package including 3D models and 2D Drawings for customer approval and for internal/external fabrication and assembly., • Reviewing and updating models and drawings as needed throughout project lifecycle., • Working closely with project team to provide technical support throughout project lifecycle, • Providing technical support to sales team, specialists and customers as needed, • Developing tools, techniques and best practices to improve the response time, accuracy, and efficiency of the design process., • Identification and maintenance of product standards, • Assisting in populating CAD libraries., • Storing, retrieving, and maintaining technical documents within Autodesk Vault., • Following company technical standards for design and engineering., • Maintaining professional working relations with Associates, Vendors, and Customers, • Maintaining high quality standards. The Mechanical Drafter will excel with: • Bachelor’s degree (B. S.) in Engineering, • Machine design and system integration experience., • Experience with hydraulics, pneumatic actuators, valves, and controls a plus., • Proficient with 3D design software (Inventor), • A keen attention to detail with strong organizational skills, • Ability to work independently and manage multiple tasks, • Excellent written and verbal communication skills, • Committed team player with caring attitude, • Proficiency with use of Microsoft Office software tools: Word, Excel, Outlook, PowerPoint, • Ability to read and understand drawings and BOM’s, • Ability to draw and interpret pneumatic schematics. The Mechanical Drafter will be rewarded with: • $83,000-85,000,000 Base Annual Salary, DOE, • 401K Retirement Savings, • 9 Paid Holidays, • Paid time Off (PTO) up to 5 weeks based on years of service, • Comprehensive Medical & Dental Insurance, • Life, AD&D Insurance, • Short & Long Term Disability, • Long Term Care Insurance, • Employee Assistance Program, • Flexible Spending Account Plan, • Direct Deposit, • Annual Service Awards Must be authorized to work in the United States without sponsorship This Company uses E-Verify to confirm identity and employment eligibility

Job DescriptionDescription: At Mikron we are committed to delivering the best assembly systems and all needed services throughout your product’s entire life cycle. With our extensive engineering know-how, complex process expertise, scalable platforms and lifelong support we are driving lasting success for your business. With more than 4,000 assembly and test systems in use worldwide, our team of over 800 qualified employees have unique process expertise and the rigor for complex project management in a wide range of industries. Mikron experts will work closely with you to design an automated assembly system that meets your unique, industry-specific processes, whether for high-volume, medium-volume or lab-scale production. Mikron's standard systems are scalable and customizable to meet your current needs and adapt to future production requirements, without the need for costly and extensive future upgrades. The MT Level I position supports customers and Mikron CUS staff by providing information and technical hands on support. Key responsibilities include the implementation of machine upgrades to improve yield, increase reliability, and to provide mechanical instruction/training as necessary. In addition, a CUS MT I is responsible for the mechanical build, debug, and calibration of Mikron Corporation Denver Customer Service projects. Throughout these projects the MT Level I has a key role in guaranteeing the correct functionality of the customer’s system within the time and system availability constraints. Requirements: Essential Duties & Responsibilities • Provide necessary mechanical support and related information to Customer Service personnel- Applications, Engineering, Sales, Customer support, and Parts, • Support installation of CUS projects at the customer site, • Maintain confidentiality while addressing diverse responsibilities across multiple customer sites., • Responsible to respond to customers in less than 24 hours for normal requests and within 1 hour for down type situations., • Receive parts from Logistics in order to assemble machinery following standard procedure, • Accurate mechanical build and installation of stations per design, • Alignment of the machine and conveyor circuit, • Wiring and plumbing of the machine per company’s standards, • Pre-align stations with calibration, • Final alignment and fine tuning of station, • Brainstorm potential mechanical changes with the engineering team, • Install and change mechanical cams, • Run machine during debug, • Install safety guarding, • Minimum of 1-2 years of Mechanical Technician or equivalent experience, • Willing and able to travel 75% of the year with overtime of 50%, including travel with little to no notice, • Prototype machine assembly experience with pneumatics, • Ability to read, interpret and work from engineering drawings and sketches, • Computer Aided Design experience, • Ability to make sound decisions working independently or working within a team, • Must be eligible to work in the United States, • Must be able to travel as requested, • Must be available to work overtime, • May be required to work off shift hours and Holidays, • Must have a valid state Driver's license, • PTO, • 10 paid holidays (1-2 floating holidays depending on start date), • Pet Insurance, • Excellent Medical, Dental, and Vision insurance, • Short Term Disability, Long Term Disability, Life Insurance & ADD, • FSA, HSA, • Eligible for Straight Time & Daily Per Diem, • Employee Assistance Program, • 401k with matching up to 5%, immediately vested, • Tuition and Continuing Education Reimbursement

Job Description CLICK HERE TO APPLY FOR THE VETERINARY STERILE PROCESSING ASSISTANT POSITION CARE | Charlotte Animal Referral & Emergency is an independently, woman-owned 24-hour Emergency and Specialty Referral Hospital in Charlotte, NC that offers its employees a fun company culture, supportive work environment, excellent benefits, and opportunities for growth! Board-certified specialty services offered include internal medicine, cardiology, neurology, surgery, oncology, and ophthalmology. Our advanced diagnostic services include ultrasonography and echocardiography, electroencephalography, endoscopy, rapid-scan CT imaging, high field MRI, and cardio cath lab, in addition to many others. CARE is seeking a Sterile Processing Assistant with veterinary experience to join our team! A Sterile Processing Assistant performs decontamination, preparation, sterilization, and distribution of instrumentation and medical equipment for surgeries and procedures, utilizing infection control and safety practices during all phases of the process. * CLICK HERE TO APPLY FOR THE VETERINARY STERILE PROCESSING ASSISTANT POSITION Requirements: • High School degree or equivalent, • Minimum of 1 year of Central Supply, Sterile Processing, or veterinary experience, • Strong attention to detail, • Ability to prioritize tasks and manage time effectively, • Ability to work in a fast-paced environment and multitask, • The ability to lift up to 40 lbs. unassisted, • Emotionally intelligent, • Critical thinking skills, • Comfortable using computers, • Excellent written and verbal communication skills Schedule: • 8:30AM to 7PM for Full Time, • Alternate between Mon-Thurs and Tues-Fri every other week - have a 4-day weekend every other week!, • Full Time Responsibilities: • Maintaining proper sterile technique, • Proactive distribution of all necessary equipment and instrumentation for surgeries and procedures, • Collecting used and contaminated equipment, instruments, and supplies for sorting and decontamination, • Accurately handle and care for instruments, including appropriate selection of cleaning agents, identification, and assembly, • Preparing and packing decontaminated supplies for sterilization, • Operation, maintenance, and troubleshooting of sterilization equipment, • Maintain consistency and continuous workflow between the operating rooms, • Restock surgical inventory, • Other duties as assigned Benefits: • An initial 80-hours of PTO (increases with tenor), • Company Health Insurance, • Dental Insurance, • Vision Insurance, • 401k with Company Match, • Group Term Life Insurance, • Voluntary Term Life Insurance, • $1,500/yr HRA, • Employee Assistance Program, • Employee Discount, • $750/yr CE Allowance, • Uniform Allowance, • Referral Program, • Tuition Reimbursement Interested? Take a virtual tour here! CLICK HERE TO APPLY FOR THE VETERINARY STERILE PROCESSING ASSISTANT POSITION Powered by JazzHR wNJqLxfEpR

Job Description • We are hiring immediately for a full time PATIENT SERVICES LEAD position., • Location: Atrium Health Carolinas Rehab - 1100 Blythe Boulevard, Charlotte, North Carolina 28203. Note: online applications accepted only., • Schedule: Full time; Days and hours may vary. Open availability is preferred. Rotating weekends. More details upon interview., • Requirement: Prior supervisory or lead experience is required. Prior patient experience and customer service experience are preferred., • Perks: Opportunity for growth! Vacation accruals day one. Shift meal provided., • Fixed Pay Rate: $21.06 per hour. Make a difference in the lives of people, your community, and yourself. Join a culture of opportunity with Morrison Healthcare. Our careers are filled with purpose and empower you to transform healthcare experiences. Take a look for yourself! Morrison Healthcare is a leading national food and nutrition services company supporting more than 1,000 hospitals and healthcare systems across 46 states, many of which are recognized as U.S. News & World Report ranked Top Hospitals and Health Systems. For over 70 years, Morrison has been serving some of the nation’s largest health systems and bringing a culinary, nutritional, and operational expertise that truly transforms the healthcare dining experience. Morrison has more than 1,600 registered dietitians, 1,200 executive chefs, and 31,000 professional food service team members. The company has been recognized as one of Modern Healthcare’s Best Places to Work since 2012. Job Summary Patient Services Leads are responsible to coordinate patient meal service and special requests and needs for the Patient Dining Program. Ensure that Patient Dining Associates are adequately trained and that units are properly staffed to provide service. They are a huge part of creating a culture of comfort and compassion in the healthcare environment, taking care of patients’ special requests and nutritional needs. Essential Duties and Responsibilities: • Oversees systems and processes to ensure that the strategic and operational objectives of the Patient Dining Program service are accomplished., • Supervise Patient Dining Associates and ensure they provide services that include helping patients make menu selections, assemble, and deliver/pick-up their meal trays., • Work with the caregivers and culinary team to determine menu alternatives for patients with food allergies and sensitivities; cultural, ethnic and religious preferences; or when a patient inquires about additional selections., • Interacts with nursing and evaluates on a daily basis patient meal selection, tray completion, tray delivery and tray retrieval process., • Is responsive to patients' needs at all times. Communicate problems or concerns with patients to appropriate personnel in a timely manner, following department procedures., • Assist dietitians, such as helping monitor patients who cannot eat food through their mouth, are on liquid diets or have a specific calorie count to manage., • Adhere to facility confidentiality and the patient’s rights policy as outlined in the facility’s Health Insurance Portability and Accountability Act (HIPAA) policies and procedures., • Complies with regulatory agency standards, including federal, state and JCAHO., • Follow Hazard Analysis Critical Control Point (HACCP) guidelines, a prevention based food safety system for meal assembly and distribution., • Comply with federal, state and local health and sanitation regulations, as well as department sanitation procedures., • Complete all daily, weekly or monthly reports as outlined in the Morrison Healthcare policies and procedures., • Conduct daily associate team meetings following Morrison’s branded GR8 Start Meeting guidelines and template., • Performs other duties as assigned. Qualifications: • Ability to communicate and read documents such as safety rules, procedure manuals, and operation and maintenance instructions., • Aptitude for effectively operating hospital’s admission, discharge and transfer (ADT) system, and other computer-based systems, which manage patient care records., • Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Morrison Healthcare is a member of Compass Group. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Morrison Healthcare maintains a drug-free workplace.

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking a Project Manager for our client in the Construction & Engineering domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Permanent position, and the client is looking for someone to start immediately. Duration: Full-time Location: Charlotte, North Carolina Salary: $120,000-$140,000/Annually Role: Project Manager Primary Skills: Engineering Role Description: The Project Manager must have 10+ years of experience. In this role, you will have an overall responsibility for detailed planning and execution of all activities required to develop, design, source, construct and commission a successful DRI plant project. You will ensure project activities are planned, sequenced and executed in a manner that optimizes project delivery and balances scope, schedule, cost and risk. You will provide leadership and direction to a multi-disciplined matrixed team to achieve these requirements. The Project Manager will also serve as the key interface and maintain client relations throughout the project. Additionally, you will also be responsible for frequent interface and coordination with partners (consortium), contractors and vendors. The Project Manager is a critical position within the Company and performs a significant role in the execution of large scale industrial Direct Reduction Iron (DRI) plant projects valued in excess of $100 million. This position will support one or more projects/programs of varying size and complexity. Supervisory Responsibilities: • Serves as the senior leader on the Company project team. May have one or more direct reports. Duties/Responsibilities: • Coordinates all Company internal efforts (sales, engineering, procurement, project controls, quality, construction, operations, etc.) and external efforts (with the client, partners, vendors and subcontractors) in order to optimize the project plan and execute the project., • Provides support to the Sales team throughout project development to clarify scopes of work, define work plans, develop preliminary project schedule, and participate in meetings with prospective clients., • Assists with development of proposals, cost estimates and specifications by defining and clarifying scope of engineering, scope of supply, and field services. The Project Manager signs off on the as-sold cost estimate., • Co-leads the Project Kick-off Meeting along with the Sales team, issues meeting minutes and ensures timely resolution of outstanding issues from the meeting., • Responsible for preparing a Project Management Plan (also referred to as the Project Quality Plan or PQP) for each project. The PQP is a comprehensive plan containing the detailed scope or work, project organization chart, schedule, quality plan, document distribution matrix, and other defined information required for assuring a successful project., • Ensures adequate manpower is assigned to the project and establishes the project organizational chart., • Oversees the development of and adherence to a logically driven project schedule (in Primavera P6) that achieves all defined milestones and other committed dates throughout the project life., • Must have a strong grasp on key scheduling concepts such as baselining, float, variance, crashing of activities, etc., • Responsible for achieving the financial objectives for the project and oversees the development and ongoing application of project cost reporting., • Must have a strong grasp of the Earned Value methodology as well as with budgeting, forecasting, cost variances and risk management., • Along with support from the Project Engineer and Project Controls, will conduct monthly project reviews to senior management to provide a clear status of the project., • Also develop and report out to the client in the detail and frequency as specified in the contract., • Responsible for Scope Management and preventing scope creep throughout the lifecycle., • Ensure that Company fulfills its contractual obligations. For all scope changes or new scope items, Must diligently manage (through the Change Management process) to ensure that the company is fairly compensated and provided with sufficient schedule., • Responsible for the development and assembly of all client Change Order requests using team resources as required., • Approved Change Orders (internal and external) must be coordinated through Project Controls and Corporate Accounting to ensure they are captured in the ERP system., • Responsible for Quality Management throughout the project lifecycle. Quality Management is a broad term that encompasses ensuring that the project team follows all organizational work processes and procedures. Quality Management also entails ensuring that Company produces and supplies high quality engineering products and high-quality manufactured goods, materials and equipment., • Reviews and approves the quality inspection plan developed by the Inspection Engineer/Coordinator, Project Engineer and Project Lead Discipline Engineers., • Oversees the resolution of all NCRs, CARs, customer complaints and punch list items and approves all goods prior to being released for shipment., • Responsible for the Health and Safety of team members working on the project., • Establish a strong safety culture where site personnel feel free to discuss safety performance, risks and concerns., • Develops the site Safety Plan. This may be done in conjunction with the client. The safety plan must include names, contact information, address, maps, etc. for the nearest emergency medical facility. This plan should be provided in English as well as other local languages used at site. The safety plan should also specify PPE requirements for the project., • Shall ensure team members receive and are up to date on mandated safety training prior to performing work on site., • Oversee the execution of the procurement plan, reviews bid evaluations and approve all vendors selections., • Coordinates with the Purchasing Manager and Company legal department to ensure Purchase Order Terms and Conditions are aligned with client contract requirements., • Review and approve buy requisitions and Purchase Orders through the workflow process., • Responsible for coordinating internal review of all warranty claims and ensuring timely resolution., • Provides direction and leadership to the site adviser team consisting of construction managers, field engineers, material coordinator, as well as commissioning and operations personnel., • Develops training plans and commissioning plans through coordination with the client., • Responsible for the Records Administration process throughout the life of the project., • Provide direction and guidance to the Project Document administrator for project transmittals through the PDM system., • Protects all Company secret, proprietary and sensitive information., • Ensures only those with a strict need to know are provided with access to these documents and in accordance with Company policies., • Ensure meeting minutes are captured for all meetings and actions are addressed in a timely manner., • Responsible for project closeout including as-built drawings, archival of documents, negotiated settlements, contract closure, lessons learned, etc., • Perform additional assignments as may be requested by the Director of Projects/Senior Project Manager, including travel and field assignments required to carry out assigned tasks. Skills/Abilities: Required: • 10+ years of hands-on project management experience in an EPC or EP environment., • Preferably within the iron or steel industry and with international experience., • Proficiency with an Electronic Document Management System (EDMS) software (such as SmarTeam, Documentum, etc.) as well as with document workflows and management., • Proficiency with common computer applications (Word, Excel, SharePoint, Power BI, Adobe, etc.)., • Ability to interface with all levels of the project team, Company senior management, clients, vendors, construction partners, etc., • Confident and comfortable leading presentations to executive management., • Must be a critical thinker with a focus on solving and overcoming challenges., • Excellent interpersonal, oral and written skills are required. Preferred: • 5+ years of industrial construction exposure and experience desired., • General knowledge of the Generally Accepted Accounting Principles (GAAP) and how the project financials directly influence the company’s overall revenue and profit recognition process., • Project Management Profession (PMP) certification and Professional Engineer (PE) registration are desired., • OSHA 10 certified (OSHA 30 desired). Education and Experience: • Bachelor’s Degree in Engineering. Mechanical preferred but will consider Chemical, Electrical or Civil. Travel Requirements: Willingness and ability to travel domestically and internationally as required to support project needs. Travel demands change throughout the project lifecycle with lower demands early in the project during the engineering and procurement phases and with higher demands during commissioning, startup and performance testing. Physical Requirements: Prolonged periods of sitting at a desk and working on a computer. Education: Bachelor’s degree in Computer Science, Electrical/Electronic Engineering, Information Technology or another related field or Equivalent Experience: Minimum 10+ years of experience Relocation: This position will not cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Devyanshu Pawar Recruiter Phone: 412-490-7931 Benefits: This is a direct hire position, and the hired applicant will receive our client’s benefits package. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description Senior Field Service Technician Looking to hire a Senior Field Service Technician in the North Carolina area! Serve as a Senior Field Service Technician in the North Carolina area and be responsible for repairing a variety of products and installation of high-tech machines. This position contributes to resolving complex problems, installation of new introductory model equipment, retrofits, and design improvements at customer sites. Key Responsibilities: • Troubleshoot machine issues in various areas including mechanical alignment, hardware, software, peripheral devices, and automation, • Provide on-site troubleshooting and repair support when required, • Proficient use of precision measuring/diagnostic equipment. Not limited to, but include the use of: laser, ball bar, micrometers, calipers, precision levels, precision indicators, dynamometers, etc., • Basic use of hand tools and a variety of electrical and mechanical devices, such as precision measuring equipment, multimeters, oscilloscope, cranes, & forklifts, • Associates Degree in Electronics or equivalent experience, • Minimum of 7 years’ experience in CNC controls, servo systems, PLC's, automation, and fundamental mechanical background including precision measurement, machine tool theory, hydraulics, and pneumatics, • 7 years of prior machine tool experience, • Advanced assembly drawing interpretation and ability to read blueprints and electrical schematics, • Strong analytical and troubleshooting skills, • Ability to lift and carry, push, or pull up to 70 pounds Work Schedule: Monday - Friday *Frequent Travel Required (80% - 90%) • Frequent travel to the East Coast Qualified candidates please email your resume today!

Job Description Join North Coast Container as a General Labor Operator and immerse yourself in a dynamic manufacturing environment in Charlotte, NC! Experience the thrill of hands-on work where every day presents new challenges and opportunities to excel. This onsite position allows you to engage with a passionate team dedicated to customer-centric solutions. Your role will have a direct impact on our operations, and you'll gain invaluable experience in the manufacturing industry. You will be provided great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, and Paid Time Off. Don't miss your chance to be a part of a company that values integrity and fosters a culture of teamwork. Apply today and take the next step in your career with North Coast Container! Let us introduce ourselves North Coast Container (NCC) is the leading independent manufacturer of steel drums in North America because of our unwavering customer focus. What would you do as a General Labor Operator As a General Labor Operator at North Coast Container, you can expect a fast-paced and engaging work environment. Your day-to-day responsibilities will include operating machinery, conducting quality inspections, and assisting in the assembly and packaging of products. You will work closely with team members, ensuring that safety protocols are followed meticulously. Preparing materials for production and maintaining a clean, organized workspace will be key tasks in your role. Additionally, you will be required to communicate effectively with supervisors to report any issues and suggest improvements. Demonstrating a customer-centric mindset and striving for excellence in your work will be vital as you contribute to our mission of delivering high-quality manufacturing solutions. Embrace the opportunity to learn and grow as you become an integral part of our operations! Requirements for this General Labor Operator job To thrive as a General Labor Operator at North Coast Container, several key skills will set you up for success. Strong attention to detail is essential, allowing you to maintain high-quality standards during production processes and inspections. Excellent communication skills will enable effective collaboration with team members and supervisors, fostering a positive and efficient work environment. Physical stamina and the ability to perform manual labor tasks safely are vital to managing the demands of the role. A genuine commitment to safety and a willingness to learn will not only enhance your performance but also contribute to a culture of excellence within the organization. Embrace the chance to develop these skills while making a meaningful impact on our operations! Connect with our team today! If you think this job aligns with your requirements, then submitting an application is simple. Good luck! Job Posted by ApplicantPro

Job Description Our client specializes in commercial construction across the Southeast and beyond. With over 70 years of experience, a $940M annual revenue, and $900M bonding capacity, they’re recognized as a Best Workplace for their culture and people-first approach. Their expertise spans adaptive reuse, corporate, education, government, healthcare, hospitality, industrial, public assembly, retail, and site/civil sectors. We’re seeking an experienced Project Manager to join the team. This role is responsible for leading projects from pre construction through closeout, ensuring delivery that meets schedule, budget, safety, and quality goals. Responsibilities • Lead project planning, scheduling, budgeting, and execution., • Collaborate with owners, architects, engineers, and trade partners throughout all phases., • Manage subcontractor procurement, contracts, and performance., • Monitor cost reports, forecasts, and change management processes., • Drive proactive problem-solving to keep projects on track., • Foster strong client relationships and represent the company with professionalism., • Uphold company values of honor, humility, hospitality, and hustle in all interactions. Qualifications • Minimum 5+ years of experience as a Project Manager in commercial, healthcare, industrial, or retail construction. Ranging from $1M to $50M. Healthcare experience is preferred., • Proven success delivering projects from start to finish within budget and on schedule., • Strong financial acumen and knowledge of project controls., • Excellent communication, negotiation, and leadership skills., • Proficiency with construction management software and tools. Why Join Us • Competitive salaries, • Comprehensive medical, dental & prescription plans, • Health Reimbursement Account (HRA), • Matching 401(k) program, • Short & long-term disability benefits, • Paid vacation (based on position) and holidays, • Supportive, friendly work culture, • Company-sponsored social events, • Community giving & charitable programs If you’re passionate about building meaningful projects and want to join a company that treats clients like family and buildings like a human enterprise, we’d love to hear from you.

Job Description Our client specializes in commercial construction across the Southeast and beyond. With over 70 years of experience, a $940M annual revenue, and $900M bonding capacity, we're recognized as a Best Workplace for our culture and people-first approach. Our expertise spans sectors such as adaptive reuse, corporate, education, government, healthcare, hospitality, industrial, public assembly, retail, and site/civil. We’re seeking an experienced Superintendent to join our team. This role is responsible for overseeing day-to-day job site operations, ensuring projects are delivered on time, within budget, and to the highest quality standards. Responsibilities • Lead and manage daily field operations on assigned projects., • Coordinate subcontractors, suppliers, and field staff to ensure smooth workflow., • Maintain a safe, compliant job site and promote company safety culture., • Monitor schedule and budget performance, proactively resolving issues., • Foster positive relationships with clients, trade partners, and team members., • Uphold company values of honor, humility, hospitality, and hustle in all interactions. Qualifications • Minimum 8 years of experience as a Superintendent with healthcare or commercial projects, ranging from $1M to $50M. Healthcare experience is preferred., • Strong leadership, communication, and organizational skills., • Proven ability to manage subcontractors and field teams., • Track record of delivering projects safely, on time, and within budget. Why Join Us • Competitive salaries, • Comprehensive medical, dental & prescription plans, • Health Reimbursement Account (HRA), • Matching 401(k) program, • Short & long-term disability benefits, • Paid vacation (based on position) and holidays, • Supportive, friendly work culture, • Company-sponsored social events, • Community giving & charitable programs If you share these values and are interested in joining a team that treats clients like family and buildings like a human enterprise, we’d love to hear from you.

Job DescriptionCompany Description ProSidian is a Management and Operations Consulting Services Firm focusing on providing value to clients through tailored solutions based on industry-leading practices. ProSidian provides Enterprise Service Solutions for Risk Management | Compliance | Business Process | IT Effectiveness | Engineering | Environmental | Sustainability | and Human Capital. We help forward-thinking clients solve problems and improve operations. Launched by Management Consultants, our multidisciplinary teams bring together the talents of Global Professionals to complete engagements for public/private companies, defense and civilian government agencies, and non-profit organizations. Our solution-centric services are deployed across the enterprise and target drivers of economic profit (growth, margin, and efficiency). They are also aligned at the intersections of assets, processes, policies, and people delivering value. ProSidian clients represent a broad spectrum of Industry Sector Groups, including but not limited to -- Sector Groups including but not limited to Consumer Products, Services, And Retail | Defense And Military | Education And Academia | Emergency Services | Energy, Infrastructure, And Environment | Financial Services | Food And Agriculture | Foreign Aid / Technical Assistance | Government And Public Services | Healthcare And Life Sciences | Industrial And Commercial | Manufacturing And Operations | National Security & Intelligence | Non-Profit | Professional Services | Real Estate And Hospitality | Technology, Media, And Telecommunications | Transport And Logistics | etc. Learn More About ProSidian: Job Description ProSidian Seeks a Senior Level Public Relations Specialist | Public Relations Specialist [COC0077076] for Program Support on a Exempt 1099 Contract: No Overtime Pay Basis Contract Contingent located CONUS - Charlotte, NC Across The Mid Atlantic Region supporting strategic delivery of Government and Public Services Sector Human Capital Solutions through Temporary Help Services and Recruiting/Staff Augmentation capabilities for the City of Charlotte (COC). Seeking Senior Level Public Relations Specialist candidates with relevant Government And Public Services Sector Experience (functional and technical area expertise also ideal) to support professional services engagement for Government And Public Services Sector Clients such as COC. This as a Contract Contingent or Contract W-2 (IRS-1099) Public Relations Specialist Functional Area Professional - Staffing Augmentation and Recruiting Services Position; however, ProSidian reserves the right to convert to a Full-Time ProSidian employed W-2 Position. JOB OVERVIEW Provide services and support as a Staffing Augmentation and Recruiting Services (Senior Level Public Relations Specialist) in the Government And Public Services Industry Sector focusing on Human Capital Solutions for clients such as City of Charlotte (COC) | Charlotte Cooperative Purchasing Alliance (CCPA) Generally Located In CONUS - Charlotte, NC and across the Mid Atlantic Region (Of Country/World). RESPONSIBILITIES AND DUTIES - Senior Level Public Relations Specialist | Public Relations Specialist [COC0077076] • Draft press materials and fact sheets., • Maintain media contact databases., • Assist with event preparation and logistics., • Coordinate press kit assembly and distribution., • Monitor media coverage and prepare reports.Qualifications Desired Qualifications For Senior Level Public Relations Specialist | Public Relations Specialist [COC0077076] (COC0077076) Candidates: • Associate’s or Bachelor’s in communications or related field preferred., • Supports internal communications efforts., • Reports to Senior Communications Specialist or PR Manager. #TechnicalCrossCuttingJobs #Consulting #Government And Public Services #GovernmentSupportServices #ProfessionalAnalyticalSupport #Jugaad #Copitas #PokaYoke Additional Information As a condition of employment, all employees are required to fulfill all requirements of the roles for which they are employed: establish, manage, pursue, and achieve annual goals and objectives with Documented Goals for each of the firm's Eight ProSidian Global Competencies [1 - Personal Effectiveness | 2 - Continuous Learning | 3 - Leadership | 4 - Client Service | 5 - Business Management | 6 - Business Development | 7 - Technical Expertise | 8 - Innovation & Knowledge Sharing (Thought Leadership)]; and to support all business development and other efforts on behalf of ProSidian Consulting. CORE COMPETENCIES • Teamwork – the ability to foster teamwork collaboratively as a participant and effectively as a team leader, • Leadership – the ability to guide and lead colleagues on projects and initiatives, • Business Acumen – understanding and insight into how organizations perform, including business processes, data, systems, and people, • Communication – ability to effectively communicate to stakeholders of all levels orally and in writing, • Motivation – persistent in pursuit of quality and optimal client and company solutions, • Agility – ability to quickly understand and transition between different projects, concepts, initiatives, or workstreams, • Judgment – exercises prudence and insight in the decision-making process while being mindful of other stakeholders and long-term ramifications, • Organization – the ability to manage projects and actions and prioritize tasks OTHER REQUIREMENTS • Business Tools – understanding and proficiency with business tools and technology, including Microsoft Office. The ideal candidate is advanced with Excel, Access, Outlook, PowerPoint, and Word, proficient with Adobe Acrobat, data analytic tools, and Visio, and the ability to quickly learn other tools, as necessary., • Business Tools – understanding and proficiency with business tools and technology, including Microsoft Office. The ideal candidate is advanced with Excel, Access, Outlook, PowerPoint, and Word, proficient with Adobe Acrobat, data analytic tools, and Visio, and the ability to quickly learn other tools, as necessary., • Commitment - to work with intelligent, interesting people with diverse backgrounds to solve the most significant challenges across private, public, and social sectors, • Curiosity – the ideal candidate exhibits an inquisitive nature and the ability to question the status quo among a community of people they enjoy and teams that work well together, • Humility – exhibits grace in success and failure while doing meaningful work where skills have an impact and make a difference, • Willingness - to constantly learn, share, and grow and to view the world as their classroom BENEFITS AND HIGHLIGHTS ProSidian Employee Benefits and Highlights: Your good health and well-being are essential to ProSidian Consulting. At ProSidian, we invest in our employees to help them stay healthy and achieve work-life balance. We are also pleased to offer the Employee Benefits Program, designed to promote your health and personal welfare. Our growing list of benefits currently includes the following for Full-Time Employees: • Competitive Compensation: The pay range begins in the competitive ranges with Group Health Benefits, Pre-tax Employee Benefits, and Performance Incentives. The Company contributes a fixed dollar amount each month towards the Plan you elect for medical and dental benefits. Contributions are deducted on a pre-tax basis., • Group Medical Health Insurance Benefits: ProSidian partners with BC/BS to offer a range of medical plans, including high-deductible health plans or PPOs. ||| Group Dental Health Insurance Benefits: ProSidian dental carriers - Delta, Aetna, Guardian, and MetLife., • Group Vision Health Insurance Benefits: ProSidian offers high/low vision plans through 2 carriers: Aetna and VSP., • 401(k) Retirement Savings Plan: 401(k) Retirement Savings Plans help you save for your retirement for eligible employees. A range of investment options is available with a personal financial planner to assist you. The Plan is a pre-tax Safe Harbor 401(k) Retirement Savings Plan with a company match., • Vacation and Paid Time-Off (PTO) Benefits: Eligible employees use PTO for vacation, a doctor's appointment, or any number of events in their life. These benefits include Vacation/Sick days – 2 weeks/3 days | Holidays - 10 ProSidian and Government Days are given., • Pre-Tax Payment Programs: Pre-Tax Payment Programs are premium-only plans (POPs) that offer eligible employees a complete Flexible Spending Account (FSA) Plan and a tax benefit., • Purchasing Discounts & Savings Plans: We want you to succeed financially. Therefore, we offer a Purchasing Discounts & Savings Plan through The Corporate Perks Benefit Program. This provides special discounts for eligible employees on products and services you buy daily., • Security Clearance: Due to the nature of our consulting engagements, Security Clearance is required for Engagement Teams handling sensitive Engagements in the Federal Marketplace. A Security Clearance is a valued asset in your professional portfolio and adds to your credentials., • ProSidian Employee & Contractor Referral Bonus Program: ProSidian Consulting will pay up to $5k for all referrals employed for 90 days for candidates submitted through our Referral Program., • Performance Incentives: Due to the nature of our consulting engagements, performance incentives are associated with each new client that each employee works to pursue and support., • Flexible Spending Account: FSAs help you pay for eligible out-of-pocket health care and dependent daycare expenses on a pre-tax basis. You determine your projected costs for the Plan Year and then elect to set aside a portion of each paycheck into your FSA., • Supplemental Life/Accidental Death and Dismemberment Insurance: If you want extra protection for yourself and your eligible dependents, you can elect supplemental life insurance. D&D covers death or dismemberment from an accident only., • Short- and Long-Term Disability Insurance: Disability insurance plans are designed to provide income protection while you recover from a disability. ADDITIONAL INFORMATION - See Below Instructions On The Best Way To Apply ProSidian Consulting is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, Vietnam era, or another eligible veteran status, or any other protected factor. All your information will be kept confidential according to EEO guidelines. ProSidian Consulting has pledged to the Hiring Our Heroes Program of the US Chamber of Commerce Foundation and the "I Hire Military" Initiative of The North Carolina Military Business Center (NCMBC) for the State of North Carolina. All applicants are encouraged to apply regardless of Veteran Status. Furthermore, we believe in "HONOR ABOVE ALL"—success while doing things the right way. Pride comes from the challenge; the reward is excellence in the work. For Easy Application, Use Our Career Site Located On Http://Www.ProSidian.Com/ Or Send Your Resume, Bios, And Salary Expectations / Rates To Careers @ ProSidian.Com & Recruiter @ ProSidian.Com ONLY CANDIDATES WITH THE REQUIRED CRITERIA ARE CONSIDERED. Be sure to place the job reference code in the subject line of your e-mail. Be sure to include your name, address, telephone number, total compensation package, employment history, and educational credentials. Risk Management | Compliance | Business Processes | IT Effectiveness | Engineering | Environmental | Sustainability | Human Capital

Job Description The Sales Account Manager will be responsible for revenue growth at key accounts at a well-established and rapidly growing global company for the Factory Automation division. Our territory covers the southeast and ideally located in North Carolina or South Carolina. This role requires strong consultative selling skills at all levels of the customer’s organization from engineering, purchasing, and management on a 20M+ mechanical component line card and unique configurable product model. Additionally, this position will be integral in discovering and providing customer insights for business development of new services and products required to expand market share. This position has great career opportunities in the company’s rapid growth. JOB RESPONSIBILITIES: Sales: • Working closely with sales team to achieve revenue goals., • Setting account strategies on a regular basis., • Report account forecasting, opportunity funnel and progress, and activity on routine basis., • Evaluates and implements effective sales techniques to achieve revenue targets., • Diligently and timely support customers through design/purchase cycles., • Calls design engineers, buyers or other professional and technical personnel who have decision making authority and/or influence., • Consult with customers on barriers and solutions needed to increase satisfaction and grow revenue., • Synthesize and present product and service recommendations to sales management., • Facilitate meetings with product managers, engineers, and management members to support business development activities., • Strong awareness and knowledge of competition and competitive situation at customer and on opportunities., • Bachelor’s degree in business, marketing, engineering, or related area is preferred., • Minimum 3 years of industrial automation sales experience. Experience in selling mechanical components in automation/assembly equipment is preferred., • Experience selling into the automotive, EV, medical & semiconductor markets is preferred., • Excellent problem solving, interpersonal and conflict management skills., • Proficient in Microsoft Windows & Microsoft Office., • Ability to use CRM software tool in sales cycle and opportunity funnel. MISUMI is a rapidly growing international company whose exceptional commitment to our customers’ success is built on the dedication of our employees. We strive to continually strengthen our customers’ trust and elevate our reputation in the industry. With over 20 million products globally and 80 sextillion part configurations for automation, press die, and plastic mold applications, MISUMI is the most comprehensive, user-friendly engineering resource for a variety of industries including automotive, medical equipment, consumer packaging, semiconductor, and more. As both a manufacturer and distributor, MISUMI offers an unmatched, one-stop-shop to meet customer specifications, and is committed to empowering customers to do incredible design work incredibly fast. Applicants must currently be authorized to work in the United States on a full-time basis. Sponsorship for work authorization is not available. MISUMI is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, veteran status, disability, marital status, sexual orientation, citizenship status, genetic information, gender identity, or any other protected status under applicable law. FOR CALIFORNIA RESIDENTS: MISUMI USA, Inc. (“MISUMI”) complies with the California Consumer Privacy Act (“CCPA”), California Privacy Rights Act (“CPRA”), and other applicable privacy laws. We may collect the following categories of personal information for purposes of the application and hiring process: name and contact information (phone number; mailing address; email address(es)); education and qualifications; employment history and experience; LinkedIn profile; and other information voluntarily provided by the applicant. Under the CCPA and CPRA, California residents have the right to know, correct, delete, and/or limit the use of certain information collected by MISUMI. For further information, see our full privacy policy at . If you have any concerns, please send an email to . Powered by JazzHR EvoFHScBv5

Job Description MIAS Group is currently hiring a full-time Field Service Technician - Industrial Mechanic to join our field team in the Charlotte, NC area. Do you have experience with industrial maintenance? Are you attentive to detail? Do you want an enjoyable job in a stable industry with a supportive company? If so, you just might just be a perfect fit. Please, read on! This industrial maintenance position receives a competitive wage of $26-$30 per hour as well as excellent benefits, including medical benefits, a 401(k) with a company match, and paid time off (PTO) as well as a company-provided laptop, cell phone, and credit card. Additionally, we offer our Field Service Technician - Industrial Mechanic company-provided uniforms, uniform laundry services, paid travel, and a per diem while traveling for work. Sound great? Apply for this industrial maintenance position today! WHAT WE NEED FROM OUR FIELD SERVICE TECHNICIAN - INDUSTRIAL MECHANIC: • Completion of an apprenticeship as a construction or industrial mechanic OR equivalent qualifications, • Preferred 2+ years of experience with automated storage and retrieval systems (AS/RS) or load handling, • Ability to read and decipher technical drawings and assembly instructions, • Willingness to travel both within the US and internationally, • Excellent computer skills WHAT SHOULD YOU EXPECT AS A FIELD SERVICE TECHNICIAN - INDUSTRIAL MECHANIC SCHEDULE Typical warehouse working hours for this industrial maintenance position are from 7:00 AM to 3:30 PM. When working on-site, the schedule depends on the customers' needs. Some occasional night and weekend work is possible. A TYPICAL DAY FOR A FIELD SERVICE TECHNICIAN - INDUSTRIAL MECHANIC In this industrial maintenance position, you handle all the field service work and repairs for our customers! Each day, you fix and upgrade their warehouse facilities, using our products to make things more modern and efficient. Highly safety-conscious, you maintain various heavy equipment, including stacker cranes and load-handling devices. Dedicated to providing excellent customer service, you also conduct essential product training for our clients, ensuring they know everything about their upgrades! You thoroughly enjoy the work you do, and you love seeing the satisfaction your work brings to our customers! ABOUT MIAS GROUP Headquartered in Munich with locations in the United States, Hungary, China, and Australia, MIAS is THE business general contractors and system integrators turn to for innovative intralogistics. Founded in 1947, our company's origins lie in a traditional German metalworking shop. In 1985, we officially established ourselves as the trusted production company we still are today. Since 1989, we have steadily expanded into the international markets we are so proud to be a part of. In 2015, MIAS was purchased by Jungheinrich AG, where it has continued as an independent brand. Today, we employ more than 500 exceptional people at four locations. Thanks to our growing success, we proudly supply stacker cranes and telescopic forks all over the world! Our world-renowned success is all thanks to our exceptional employees! That is why we provide excellent pay, superb benefits, and an amazing work environment. We believe that employees should always be treated well by their employer, so we offer flexibility and a healthy work-life balance. We're scouring the globe in search of talented individuals to add to our team. We hope you'll join us! MIAS is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, or veteran status. ARE YOU READY TO JOIN OUR INDUSTRIAL MAINTENANCE TEAM? So, what do you think? If you feel this is the right Field Service Technician - Industrial Mechanic job for you, go ahead and apply! We value your time, so we've got a simple initial application process that should take you less than 3 minutes to complete. We look forward to meeting you! Location: 28269 Job Posted by ApplicantPro

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Napa Auto Parts - [Material Handler / Freight Handler] As a Warehouse Associate at Napa Auto Parts, you'll: Expedite incoming and outgoing freight in the warehouse; Receive, stock, pull, stage, load and ship freight; Process inventory and maximize warehouse space usage; Check, verify, load, stock an

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Cintas Corporation - JobID: 1345696800 [Material Handler / Freight Handler] As a Warehouse Associate at Cintas, you'll: Assemble uniform garments according to each individual customer employee in order to avoid mixed bundles before products are loaded onto company trucks; Count garments and record t

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Grainger - JobID: 1347308100 [Material Handler / Freight Handler] As a Warehouse Associate at Grainger, you'll: Assist in the loading and unloading of trucks; Maintain inventory accuracy by performing cycle counts; Operate material handling equipment such as forklifts and pallet jacks; Ensure all pr

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

JobID: J3M7VV75CNHYCB94G3L [Material Handler / Freight Handler] As a Warehouse Associate at Capstone Logistics, you'll: Handle the movement of pallets and cases on and off trailers by using a forklift, pallet jack or by hand; Learn all aspects of receiving, unloading and loading operations.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Cardinal Health - JobID: aa05930c-5644-49e7-a0ef-882e2d7e569c [Material Handler / Freight Handler] As a Warehouse Associate at Cardinal Health, you'll: Manage inventory levels by accurately counting and organizing medical supplies; Operate forklifts and other equipment to safely transport materials

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Ferguson - JobID: R-131369 [Material Handler / Freight Handler] As a Warehouse Associate at Ferguson, you'll: Safely operate a stand-up forklift to pull and prepare outbound customer orders; Build, wrap, sort, and transport pallets and packages; Use technology like RF devices to sort, scan, and prep

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Floor & Decor - Job Posting Site [Material Handler / Freight Handler] As a Warehouse Associate at Floor & Decor, you'll: Receive the product off delivery trucks and stock the warehouse in an organized fashion; Ensure the sales floor is stocked and ready for customers the next day; Be knowledgeable o

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Ferguson - JobID: R-130278 [Material Handler / Freight Handler] As a Warehouse Associate at Ferguson, you'll: Safely operate a stand-up forklift to pull and prepare outbound customer orders; Build, wrap, sort, and transport pallets and packages; Use technology like RF devices to sort, scan, and prep

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

JobID: J3N2L66BVC8R3BPQJP1 [Material Handler / Freight Handler] As a Warehouse Associate at Capstone Logistics, you'll: Handle the movement of pallets and cases on and off trailers by using a forklift, pallet jack or by hand; Learn all aspects of receiving, unloading and loading operations.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Cardinal Health - JobID: d8ee6ed6-698c-4d8c-a81d-fd7b7334a769 [Material Handler / Freight Handler] As a Warehouse Associate at Cardinal Health, you'll: Manage inventory levels by accurately counting and organizing medical supplies; Operate forklifts and other equipment to safely transport materials