Medical assembly jobs in Pittsburgh, PennsylvaniaCreate job alerts

Job Description Calgon Carbon | A Kuraray Company is growing - and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Position: General Laborer Location: Equipment and Assembly Facility - Pittsburgh, PA Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) – Generous Company Match! Perks: Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hours of Work: Monday-Friday (must be able to work a two-three shift rotation; day and afternoon) Under the supervision of the E&A supervisor or group leader, the technician will perform all functions under this job description. This includes all necessary functions to maintain a clean and safe shop. Complies with all Company and Safety Policies and procedures in the performance of assigned duties. Duties and Responsibilities (not limited to) • Perform all general labor functions (Sweep floors, empty trash, cut grass/remove snow when needed), • Load/unload trucks, • Operate fork truck, • Operate jib hoist, • Operate small power tools, • Operate and maintain all personal safety equipment, • Assemble all standard products, such as disposorbs, vaporpacs, high flow ventsorbs, etc., • Pressure test all assembled units to meet necessary requirements, • Recondition small returnable units, such as cyclesorbs, bulk bins, etc., • Weigh/Load carbon into the small systems as needed., • Assist in receiving and verification of quantities of materials and parts delivered to E&A., • Read instructions & drawings as necessary for the reconditioning and assembly of standard products., • Fabricates lined pipe (PPL and TFE). This includes cutting, threading, assembly, flaring and testing of pipe spools from 1” through 4”., • Cuts, threads, and assembles carbon steel pipe, plastic pipe and stainless steel pipe, • Assists with warehousing duties., • Performs layout and assembly on all small equipment such as cyclesorbs, bulk bins, vapor paks and high flow ventsorbs (and fan skids)., • Maintain CCC’s service equipment. This includes dual modules, mobile adsorbers, filters, etc. Duties include review of system when returned from customers, preparation of list(s) of required repairs and parts, performance of repairs to the mechanical parts of the systems as well as localized (spot) lining/painting repairs, • A High school diploma or general education degree (GED) is preferred, • 0-2 years of general labor experience At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we’ve been at the forefront of developing cutting-edge technologies and solutions to meet the world’s evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran PI21db9716abed-25405-37571049

Job DescriptionMancan Staffing Now Hiring: Assembly & Machine Operator (Carnegie, PA) Mancan Staffing is partnering with a well-established, family-owned manufacturer. This company is a trusted leader in products used for overhead lifting and industrial applications, offering a stable work environment with long-term potential. This is a full-time, daylight, temp-to-permanent position in an assembly shop setting. The employer is seeking a dependable individual to assist with the assembly and fabrication of rigging and related products. Training is provided, making this a great opportunity for someone looking to build skills in manufacturing. Position Details: • Schedule: MondayFriday, 7:00 AM 3:30 PM, • Location: Carnegie, PA, • Shift: Daylight, • Status: Temp-to-Perm What Theyre Looking For: • High school diploma or equivalent, • Strong reliability with consistent attendance and punctuality, • Ability to use both hands for hands-on assembly work, • Comfortable performing basic math and processing work orders accurately, • Able to sit or stand for extended periods, • Capable of lifting up to 30 lbs. as needed, • Willing to work overtime and occasional weekends when required Additional Information: • Drug screen and background check required This is an excellent opportunity to join a stable company with a strong reputation, steady hours, and the potential to transition into a permanent role. Mancan Temporary Staffing Employment Agency offers our temporary employees full benefits such as paid vacation, holidays, 401K, as well as vision, dental, and medical. Some of the best companies in the area use Mancan including Fortune 500 companies. It is a great opportunity for you to get your foot in the door with some of the areas top companies. If you have any questions please do not hesitate to call us at 724-941-3895 Apply online at or stop in as we take applications Monday-Friday from 9am-3pm. Please bring 2 forms of government ID and resume with you. Mancan temporary staffing employment agency is located at 1039 Waterdam Plaza Dr McMurray PA 15317 . Please call us at 724-941-3895 with any questions or send your resume to Check out all of our jobs at #DINDI

Job DescriptionIMMEDIATELY HIRING FOR PRODUCTION WORKERS! Job Description We are seeking dedicated individuals for the role of General Production Worker across all three shifts: 8am-4pm, 4pm-12am, and 12am-8am. Responsibilities • Operate production assembly and general labor tasks efficiently., • 1 year of experience in a manufacturing or production environment., • Ability to work in environments requiring long periods of standing., • Experience in production or assembly is preferred. This position offers the opportunity to join a strong union with excellent benefits. Job Type & Location This is a Permanent position based out of Verona, PA. Pay and Benefits The pay range for this position is $35880.00 - $35984.00/yr. Company matches 3%. Full medical for employee only. Dental and vision offered as well. Workplace Type This is a fully onsite position in Verona,PA. Application Deadline This position is anticipated to close on Feb 6, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Calgon Carbon | A Kuraray Company is growing—and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Position: CNC Plasma Table Programmer Location: Equipment & Assembly Plant – Pittsburgh, PA Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) – Generous Company Match! Perks: Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hours of work: Mondays - Fridays, 9:00 AM - 5:00 PM, 40 Hours/Week The CNC Plasma Table Programmer will create programs for the CNC Plasma table, plate roll and press brake machines utilizing part nesting software. The CNC Plasma Table Programmer will create files and daily nesting plans for the CNC plasma table. The CNC Plasma Table Programmer ensures all materials are routed properly and that enough nested jobs are prepared to keep machines running. Duties and Responsibilities (not limited to) • Monitor and maintain inventory of drop materials to maximize utilization of materials to include reducing scrap generated during processing, • Cycle count plate inventory and maximize utilization through nesting, ensuring strategic consumption of raw materials. Compare on hand material to SAP counts, • High school diploma or general education degree (GED) is required, • Associates degree (A.A.), or equivalent from two-year college or technical school is preferred, • 0-2 years 1 year of experience drafting or CNC programming is required, • 0-2 years 1 year of experience with AUTOCAD 2D is required, • 0-2 years 1 year of experience with SAP is required, • 0-2 years 1 year of experience with .DXF, .DWG and various print file types is required, • 0-2 years 1 year of experience building spreadsheets in Microsoft Excel is required At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we’ve been at the forefront of developing cutting-edge technologies and solutions to meet the world’s evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran PI2c198686cade-25405-39218695

Job Description Motional's Pittsburgh office is located in the new Hazelwood Green development, a culmination of the city's goal of restoring an economic driver to the neighborhood in a thoughtful, inclusive, and sustainable way. With views along the Monongahela river, the Pittsburgh office is in the heart of this new state of the art development. This role is based in our Pittsburgh office and requires 5 in-office days each week. Mission Summary: As a Senior PLM/PDM Engineer, you will ensure Motional's PLM/PDM systems and engineering toolchains operate smoothly and reliably. You will be the go-to expert for resolving and escalating issues related to CAD tools, data management, and PLM–ERP connectivity. You'll work cross-functionally with engineering, design, operations, and supplier teams to support day-to-day development activities while driving continuous improvement in processes and documentation. What you'll do: • Ensure CAD tools, PLM/PDM systems, and engineering applications function properly; investigate, resolve, or escalate issues as needed., • Develop and maintain documentation standards for the Hardware Engineering organization., • Create and update CAD parts, assemblies, and libraries—including vehicle assemblies and vendor-provided models., • Generate detailed 2D drawings (detail, section, assembly) following drafting standards and GD&T best practices., • Support product development, sustainment initiatives, and internal department projects., • Collaborate with designers, engineers, and technicians to ensure engineering documents and drawings are complete, accurate, and consistent., • Perform drawing checks and manage engineering change orders (ECO/CO), including BOM updates and routing., • Manage file structures, metadata, references, and overall CAD data organization., • Troubleshoot and resolve CAD-related issues across the organization., • Create, maintain, and manage Bills of Materials (BOMs)., • Maintain and organize the CAD library to support scalable design workflows., • Work closely with internal and external fabrication teams to support design release, scheduling, and installation on vehicles or hardware systems. What We're Looking For: • Strong understanding of mechanical drawings and electrical schematics., • Experience with CAD data management systems; CATIA V5 and SolidWorks strongly preferred., • Minimum 3 years of hands-on experience with 3D CAD tools (preferably CATIA V5 or SolidWorks)., • Skilled in developing 2D layouts in CATIA or SolidWorks., • Solid working knowledge of GD&T principles., • Experience with PLM tools, ideally PTC Windchill., • Deep understanding of automotive and consumer-electronics connection systems., • Ownership mindset with the ability to drive the CAD documentation process end-to-end—from design and release through fabrication, installation, schedule coordination, and change management., • Strong communication and collaboration skills, with the ability to work proactively across global, cross-functional teams., • Excellent planning, organization, and attention to detail., • Proficiency with Microsoft Word/Excel or Google Docs/Sheets., • Experience with Jira, QuickBase, NetSuite, or Zip is a plus., • Strong work ethic and ability to support production schedules and team priorities., • Ability to multitask across multiple projects and timelines., • Bachelor's degree in Mechanical Engineering or equivalent industry experience with a proven ability to apply engineering principles in real-world applications. The salary range for this role is an estimate based on a wide range of compensation factors including but not limited to specific skills, experience and expertise, role location, certifications, licenses, and business needs. The estimated compensation range listed in this job posting reflects base salary only. This role may include additional forms of compensation such as a bonus or company equity. The recruiter assigned to this role can share more information about the specific compensation and benefit details associated with this role during the hiring process. Candidates for certain positions are eligible to participate in Motional's benefits program. Motional's benefits include but are not limited to medical, dental, vision, 401k with a company match, health saving accounts, life insurance, pet insurance, and more. Salary Range$134,000—$174,500 USD Motional is a driverless technology company making autonomous vehicles a safe, reliable, and accessible reality. We're driven by something more. Our journey is always people first. We aren't just developing driverless cars; we're creating safer roadways, more equitable transportation options, and making our communities better places to live, work, and connect. Our team is made up of engineers, researchers, innovators, dreamers and doers, who are creating a technology with the potential to transform the way we move. Higher purpose, greater impact. We're creating first-of-its-kind technology that will transform transportation. To do so successfully, we must design for everyone in our cities and on our roads. We believe in building a great place to work through a progressive, global culture that is diverse, inclusive, and ensures people feel valued at every level of the organization. Diversity helps us to see the world differently; it's not only good for our business, it's the right thing to do. Scale up, not starting up. Our team is behind some of the industry's largest leaps forward, including the first fully-autonomous cross-country drive in the U.S, the launch of the world's first robotaxi pilot, and operation of the world's longest-standing public robotaxi fleet. We're driven to scale; we're moving towards commercialization of our technology, and we need team members who are ready to embrace change and challenges. Formed as a joint venture between Hyundai Motor Group and Aptiv, Motional is fundamentally changing how people move through their lives. Headquartered in Boston, Motional has operations in the U.S and Asia. For more information, visit and follow us on Twitter, LinkedIn, Instagram and YouTube. Motional AD Inc. is an EOE. We celebrate diversity and are committed to creating an inclusive environment for all employees. To comply with Federal Law, we participate in E-Verify. All newly-hired employees are queried through this electronic system established by the DHS and the SSA to verify their identity and employment eligibility.

Job Description Mission Summary You will be responsible for power and signal distribution design for Autonomous Vehicles. We are looking for someone who is proficient in hardware design life cycle, comfortable working in a high paced environment, and someone who can adapt quickly. You will work cross functionally to gather details required for proper connections, generate system diagrams, electrical schematics, wiring harness diagrams, and assist with assembly and build documentation. You will also create detailed component and system qualification, validation test plans, and perform & oversee testing. We are looking for a detail-oriented problem-solver, able to employ critical thinking and time management skills and can work effectively both independently and in teams. Work with people of diverse backgrounds and develop creative and innovative ways to improve processes. The Motional Pittsburgh office is located in the new Hazelwood Green development, a culmination of the city's goal of restoring an economic driver to the neighborhood in a thoughtful, inclusive, and sustainable way. With views along the Monongahela river, the Pittsburgh office is in the heart of this new state of the art development. What you'll be doing: • Quickly gain a deep understanding of system architecture and specifications to implement the detailed electrical design of the AV system into a vehicle platform., • Work within an interdisciplinary team to troubleshoot, test, and fix electrical and system issues in prototype vehicles and test fixtures., • Support product design reviews., • Review internal and external requirements and specification documentation., • Perform worst case analysis and simulation to ensure compliance to system requirements., • Generate system diagrams, electrical schematics, wiring harness diagrams, and assist with assembly and build documentation., • Create detailed component and system qualification and validation test plans and perform / oversee testing., • Support EMC certification testing and develop and maintain electrical DFMEA., • 6+ years of experience in electrical engineering., • Ability to read and interpret schematics and assembly drawings., • Lab equipment experience with power supplies, oscilloscopes function generators and multimeters., • Familiarity with wire harness design process and software tools to help EE team design vehicle power and signal distribution, • Ability to multitask across various project activities and work with a global team., • Ability to provide hands-on debugging as needed during testing and evaluation., • Experience with other vehicle communication networks (CAN, CAN-FD, Automotive Ethernet, LIN)., • Strong troubleshooting and debugging skills. Candidates for certain positions are eligible to participate in Motional's benefits program. Motional's benefits include but are not limited to medical, dental, vision, 401k with a company match, health saving accounts, life insurance, pet insurance, and more. Salary Range$125,000—$167,000 USD Motional is a driverless technology company making autonomous vehicles a safe, reliable, and accessible reality. We're driven by something more. Our journey is always people first. We aren't just developing driverless cars; we're creating safer roadways, more equitable transportation options, and making our communities better places to live, work, and connect. Our team is made up of engineers, researchers, innovators, dreamers and doers, who are creating a technology with the potential to transform the way we move. Higher purpose, greater impact. We're creating first-of-its-kind technology that will transform transportation. To do so successfully, we must design for everyone in our cities and on our roads. We believe in building a great place to work through a progressive, global culture that is diverse, inclusive, and ensures people feel valued at every level of the organization. Diversity helps us to see the world differently; it's not only good for our business, it's the right thing to do. Scale up, not starting up. Our team is behind some of the industry's largest leaps forward, including the first fully-autonomous cross-country drive in the U.S, the launch of the world's first robotaxi pilot, and operation of the world's longest-standing public robotaxi fleet. We're driven to scale; we're moving towards commercialization of our technology, and we need team members who are ready to embrace change and challenges. Formed as a joint venture between Hyundai Motor Group and Aptiv, Motional is fundamentally changing how people move through their lives. Headquartered in Boston, Motional has operations in the U.S and Asia. For more information, visit and follow us on Twitter, LinkedIn, Instagram and YouTube. Motional AD Inc. is an EOE. We celebrate diversity and are committed to creating an inclusive environment for all employees. To comply with Federal Law, we participate in E-Verify. All newly-hired employees are queried through this electronic system established by the DHS and the SSA to verify their identity and employment eligibility.

Job Description Motional's Pittsburgh office is located in the new Hazelwood Green development, a culmination of the city's goal of restoring an economic driver to the neighborhood in a thoughtful, inclusive, and sustainable way. With views along the Monongahela river, the Pittsburgh office is in the heart of this new state of the art development. Mission Summary: Our Vehicle Engineering team, focused on Vehicle and Product Systems in Pittsburgh, is seeking a highly motivated Senior Mechanical Engineer to own and drive complex, cross-functional mechanical design and fabrication initiatives for our next-generation vehicle prototypes and systems. This role will serve as a key technical authority, defining system-level architecture for mechatronic systems for automated driving and leading execution with minimal oversight, ensuring alignment with broad business and product objectives. What you'll do: • Technical Leadership and Design Ownership: Lead the design effort for significant vehicle build projects and technical initiatives, creating project proposals and designs that span multiple sub-systems., • Advanced Mechanical Design: Design and fabricate mechanical components and complex systems for next-generation benchtop and in-vehicle prototypes, such as mechatronic systems for automated driving., • Prototyping and Documentation: Create detailed 3D CAD models and sufficient engineering drawings for manufacturing of mechanical components. Create comprehensive bills of materials (BOM) and assembly documentation., • Process Improvement: Design, build, or improve internal processes, documentation, and structure for the team, focusing on efficiency and quality., • Testing and Validation: Develop and implement rigorous testing plans for vehicles and subsystems, and perform initial testing and debugging of newly-assembled systems to ensure high quality and reliability., • System Integration: Work with customers, suppliers, and technology partners to define requirements, explain trade-offs, and integrate complex systems in vehicles., • Mentorship and Collaboration: Provide technical mentorship and long-term development guidance to cross-functional team members, effectively communicating across teams to achieve project results., • Supply Chain Management: Source critical suppliers and parts and create documentation for outsourced components, managing the manufacturing BOM and Engineering Change Notice (ECN) process., • Requirements Management: Develop and document system-level requirements for prototype and production vehicle systems, considering all sub-systems., • Roadmap Contribution: Help define the technical roadmap and architecture based on technology and business needs. What we're looking for: • Education: Bachelor's degree in Mechanical Engineering or related field., • Experience: 7+ years relevant experience, preferably in the automotive, robotics, or automation fields, demonstrating a track record of driving project-level impact., • Design Expertise: Extensive experience designing and fabricating prototypes using advanced CAD tools (e.g., Solidworks and Catia V5) and manual methods., • Fabrication Skills: Ability to operate machine tools (mill, press, CNC, etc.), as well as standard mechanics and power tools; experience with 3D printing tools and rapid prototyping techniques., • Vehicle Systems: Comfortable debugging, disassembling, modifying, and installing electrical and mechanical systems in vehicles., • Mechatronics: Advanced experience in specifying, integrating, troubleshooting, and testing electronics, motors, and sensors., • Manufacturing Process: Expertise with manufacturing BOM and ECN processes., • Execution: Proven ability to work effectively within rigid design, integration, and time constraints, delivering high-quality and reliable execution., • Collaboration & Communication: Intermediate proficiency in collaboration, including the ability to get buy-in and create alignment across teams and stakeholders. Ability to interface globally with persons of all levels and abilities, including both internal and external teams, to achieve project success. This may include occasional work outside of standard hours to accommodate international collaboration. The salary range for this role is an estimate based on a wide range of compensation factors including but not limited to specific skills, experience and expertise, role location, certifications, licenses, and business needs. The estimated compensation range listed in this job posting reflects base salary only. This role may include additional forms of compensation such as a bonus or company equity. The recruiter assigned to this role can share more information about the specific compensation and benefit details associated with this role during the hiring process. Candidates for certain positions are eligible to participate in Motional's benefits program. Motional's benefits include but are not limited to medical, dental, vision, 401k with a company match, health saving accounts, life insurance, pet insurance, and more. Salary Range$134,000—$174,000 USD Motional is a driverless technology company making autonomous vehicles a safe, reliable, and accessible reality. We're driven by something more. Our journey is always people first. We aren't just developing driverless cars; we're creating safer roadways, more equitable transportation options, and making our communities better places to live, work, and connect. Our team is made up of engineers, researchers, innovators, dreamers and doers, who are creating a technology with the potential to transform the way we move. Higher purpose, greater impact. We're creating first-of-its-kind technology that will transform transportation. To do so successfully, we must design for everyone in our cities and on our roads. We believe in building a great place to work through a progressive, global culture that is diverse, inclusive, and ensures people feel valued at every level of the organization. Diversity helps us to see the world differently; it's not only good for our business, it's the right thing to do. Scale up, not starting up. Our team is behind some of the industry's largest leaps forward, including the first fully-autonomous cross-country drive in the U.S, the launch of the world's first robotaxi pilot, and operation of the world's longest-standing public robotaxi fleet. We're driven to scale; we're moving towards commercialization of our technology, and we need team members who are ready to embrace change and challenges. Formed as a joint venture between Hyundai Motor Group and Aptiv, Motional is fundamentally changing how people move through their lives. Headquartered in Boston, Motional has operations in the U.S and Asia. For more information, visit and follow us on Twitter, LinkedIn, Instagram and YouTube. Motional AD Inc. is an EOE. We celebrate diversity and are committed to creating an inclusive environment for all employees. To comply with Federal Law, we participate in E-Verify. All newly-hired employees are queried through this electronic system established by the DHS and the SSA to verify their identity and employment eligibility.

Job Description Electromechanical Production Technician Experienced - Up to a $3,000 Sign-on Bonus! Looking for meaningful work where you can make a difference in global innovation? Engineer a better future with Aerotech, a global leader in precision motion and automation. Our customers create some of the most innovative products on the planet, from life-saving medical devices to tools for deep space exploration. Our precision motion and automation systems make it all possible. Build a lasting, satisfying career at Aerotech, where we foster growth, empower employees and promote from within. You'll find unparalleled opportunities and a company that values your voice. We also provide an extensive total rewards compensation system, including: • Bonus payments every 6 months, • Rich health plans Position Summary: The Electromechanical Technician (experienced) role is a great opportunity for individuals with professional experience in electromechanical, precision automation, and/or other advanced technical fields. A successful candidate will assemble, test, and troubleshoot precision motion systems to an extremely high degree of accuracy. A high personal standard of quality is critical to this role. What will your day look like? At Aerotech, you could have the opportunity to: • Assemble high performance electromechanical systems in accordance with assembly documentation., • Prepare and install precision parts such as: linear and rotary bearings, optical encoders, and various drive mechanisms., • Measure/inspect parts to confirm tolerances, • Troubleshoot to determine the cause and solution to malfunctioning products, • Perform modifications and repairs of mechanical assemblies, • Recognize and use inspection equipment such as scales, calipers, micrometers, electronic indicators, etc., • General Labor such as department maintenance and clean room support, • Employee may be asked to train others in the department, • Strong mechanical and/or electrical aptitude, • Precision measurement/part inspection experience (calipers, micrometers, dial indicators), • Blueprint/Drawing experience, • Experience with robotics/precision automation (preferred), • Soldering skills, including familiarity with IPC-610 / IPC-620 soldering standards, • Effective computer literacy and use of software, such as an ERP system, • Must have a High School Diploma or GED, • Five years of related experience and/or training or equivalent combination of education and experience may be considered, • Qualified candidates must have a mechanical aptitude Aerotech has been advancing industries with our precision motion technology for more than 50 years. Our employees are our future, and we continue to grow by investing in our employees through continuous paid on-the-job training in a clean and climate-controlled environment, while providing the following exceptional benefits and more! • Competitive compensation, • Bi-annual bonus, • Annual raise eligibility, • UPMC Health Insurance, • Dental insurance, • Vision insurance, • Life insurance, • Retirement Plan, • Employee Stock Ownership Trust, • 401k, • Paid time off, • Parental leave, • Referral program, • Professional development assistance Aerotech is committed to the concept and practice of equal employment opportunity and affirmative action. The Company's policy is to provide equal employment opportunity to all qualified applicants and employees regardless of their race, color, religion, age (40 or over), sex, national origin, disability, or veteran status. This policy applies to recruiting and hiring, training, promotion, compensation, benefits, transfer, layoff, and termination. The Company makes and will continue to make all employment decisions in a non-discriminatory manner. The Company is collecting the information requested in this employment application for purposes of evaluating your suitability for hire by the Company. The Company will share the information that you provide in this employment application only with Company management officials who are involved in the hiring process or who are otherwise involved in making employment-related decisions on behalf of the Company. Powered by JazzHR 7J6o0PDMBd

Job Description Under the leadership of the Director of Biobank Operations and direct supervision of the Senior Research Histologist, the Biobank Histologist-Data Specialist will support breast and colorectal cancer clinical trials and associated research. Job responsibilities include but are not limited to: performing histological examinations, testing and processing of tissue samples for further examination by research pathologists, maintaining the tissue specimen bank by electronically entering tissue-related data and ensuring the ability to track chain of custody for biospecimens from time of receipt through specimen return to member institutions. This position has a diverse range of job responsibilities (further outlined below) which affords interesting and gratifying employment. ESSENTIAL FUNCTIONS Histology (45% of time) • Under the direct supervision of the Senior Research Histologist and indirect supervision of the Director of Biobank Operations, the Biobank Histologist-Data Specialist shall embed, cut and stain tissue samples for further examination by research pathologists., • Manages the quality control of tissue specimens through visual reviews and ongoing discussions with the Senior Research Histologist. Additional feedback from Director of Biobank Operations and research pathologist may also be incorporated into ongoing quality management., • Logs specimens and exceptions into the histology logbook and in the Laboratory Information Management System, as needed/directed by the Senior Research Histologist and Director of Biobank Operations. Electronic data entry/management (40% of time) • Electronically enters pertinent specimen-related data, ensuring the ability to physically track biospecimens from the time of specimen receipt through biospecimen return to the member institutions., • Verifies accuracy of protocol data entered by other biobank data specialists., • Completes electronic inventory of biospecimens in laboratory information management system (OpenSpecimen). Other responsibilities (15% of time) • Operates laboratory equipment and instruments; records data; maintains and makes minor adjustments to equipment. Prepares, cleans, sterilizes and maintains laboratory equipment as directed by Senior Research Histologist and Director of Biobank Operations., • Performs general laboratory duties regarding inventory control and supply order preparation as directed., • Complies with federally mandated safety standards through proper handling of potentially hazardous chemical and biological agents in the workplace., • Maintains professional knowledge by reviewing professional publications, attending professional meetings, and establishing personal networks., • Understands the policies, procedures, regulations, and practices necessary to conduct the normal function of this position., • Maintains confidentiality and performs duties in a responsible and ethical manner., • Assists in the assembly of biospecimens kits to Member sites., • Performs additional duties as may be assigned. EXPERIENCE/SKILLS • Histotechnician/histotechnologist certification or greater than 5 years of work experience., • Associate's degree in scientific discipline or equivalent experience., • Experience using a laboratory information management system (LIMS)., • Strong typing skills and attention to detail, entering data with high level of accuracy. Able to verify accuracy of data entered by others and edit accordingly., • PC Proficiency of Microsoft Office Applications; working knowledge of office equipment., • Preferred experience in data entry using medical terminology., • Familiarity with documented good laboratory practices., • Strong organizational skills; able to manage time effectively to ensure completion of tasks in a timely manner., • Able to work both independently and in a team setting.

Job Description Looking for meaningful work where you can make a difference in global innovation? Engineer a better future with Aerotech, a global leader in precision motion and automation. Our customers create some of the most innovative products on the planet, from life-saving medical devices to tools for deep space exploration. Our precision motion and automation systems make it all possible. Build a lasting, satisfying career at Aerotech, where we foster growth, empower employees and promote from within. You'll find unparalleled opportunities and a company that values your voice. We also provide an extensive total rewards compensation system, including: • Bonus payments every 6 months, • Rich health plans, • Retirement planning with our 100% company-paid Employee Stock Ownership Trust If you’re mechanically inclined or technically savvy with a passion for cutting-edge technology, we want to hear from you. Position Summary: As an Electrical Manufacturing Engineer I, you will play a key role in enhancing our production capabilities for advanced robotic systems used in the medical and electronics industries. You will focus on designing and implementing automation tools, integrating sensors for data collection, and improving manufacturing processes for PCBs, electronics, and motors to drive efficiency and quality. Essential Functions: • Design, develop, and improve manufacturing processes with a primary focus on Printed Circuit Boards (PCBs), electronics assemblies, wiring harnesses, and motors., • Develop microcontroller robotic automation tools, and automated test equipment to enhance production efficiency and enable integrating and retrofitting sensors into manufacturing equipment for critical data collection., • Assist in the analysis of collected manufacturing data to identify trends and drive process improvements., • Collaborate with other engineering groups to provide guidance on Design for Manufacturability (DFM) for new and existing products., • Assist troubleshooting and problem-solving efforts in manufacturing departments., • Develop clear work instructions and procedures to document proper manufacturing processes., • Assist with the physical layouts of manufacturing cells and assembly areas and acquires information and prepares feasibility studies or justifies purchase or building of new equipment, • Develop training methodology and assist with technical training on new equipment and processes.Additional duties:, • Assists with physical layout of manufacturing cells and assembly areas, • Acquires information and prepares feasibility studies for purchasing new equipment, • Participate in meetings, seminars, and training sessions to stay apprised of new developments in field, • Confer with workers in other departments such as sales, marketing, engineering and administration to provide technical information and implementation of operating procedures and to resolve system malfunctions, • As assigned Knowledge, skills, and abilities:, • Effective verbal and written communication skills, • Strong analytical and problem-solving skills, • Ability to define problems, collect data, establish facts, and draw valid conclusions, • Ability to interpret a variety of technical instructions in mathematical or diagram form, • Experience with Python or C programming is strongly preferred, • Familiarity with electrical CAD/ECAD software (e.g. AutoCAD Electrical, Altium, KiCad, SolidWorks) is preferred, • A basic understanding of database queries (e.g., SQL) is a plus Minimum Qualifications: • Bachelor of Science (BS) degree in technical discipline such as Electrical Engineering from an accredited college or university, • Equivalent combination of education and experience may be considered, • Must be authorized to work in the United States without employer sponsorship. Aerotech does not provide US work authorization sponsorship for this position. OPT and CPT visa holders are not eligible for employment if they will need work authorization sponsorship at any time in the future. Benefits Aerotech has been advancing industries with our precision motion technology for more than 50 years. Our employees are our future, and we continue to grow by investing in our employees through continuous paid on-the-job training in a clean and climate-controlled environment, while providing the following exceptional benefits and more! • Competitive compensation, • Bi-annual bonus, • Annual raise eligibility, • UPMC Health Insurance, • Dental insurance, • Vision insurance, • Life insurance, • Retirement Plan, • Employee Stock Ownership Trust, • 401k, • Paid time off, • Parental leave, • Referral program, • Professional development assistance, • Tuition reimbursement As an Equal Employment Opportunity/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, Veteran or disability status. The Company is collecting the information requested in this employment application for purposes of evaluating your suitability for hire by the Company. The Company will share the information that you provide in this employment application only with Company management officials who are involved in the hiring process or who are otherwise involved in making employment-related decisions on behalf of the Company. Powered by JazzHR yPooD6w8u6

Job Description Electronic Technician - Systems - Up to a $3,000 Sign-On Bonus! Looking for meaningful work where you can make a difference in global innovation? Engineer a better future with Aerotech, a global leader in precision motion and automation. Our customers create some of the most innovative products on the planet, from life-saving medical devices to tools for deep space exploration. Our precision motion and automation systems make it all possible. Build a lasting, satisfying career at Aerotech, where we foster growth, empower employees and promote from within. You'll find unparalleled opportunities and a company that values your voice. We also provide an extensive total rewards compensation system, including: • Bonus payments every 6 months, • Rich health plans, • Retirement planning with our 100% company-paid Employee Stock Ownership Trust If you’re mechanically inclined or technically savvy with a passion for cutting-edge technology, we want to hear from you. What will your day look like? At Aerotech, you will: • Follow detailed instructions and procedures to conduct functional tests on electronic equipment and electromechanical systems in order to evaluate system performance under actual operation conditions., • Read and interpret schematic, assembly, and wiring diagrams, • Troubleshoot and repair electronic equipment to the component level and electromechanical systems, • Analyze and interpret test data, • Conduct functional test on prototype electro-mechanical systems and provides test data to engineering What will separate you from the rest? Experience with: • Systems level troubleshooting, • Motion systems or robotics, • Servo tuning, • Brushless motor and feedback devices, • Ability to use digital multimeters, current probes, encoders, and oscilloscopes, • Effective computer literacy, including experience with ERP Software Minimum Qualifications: • Associate Degree in Electrical Engineering Technology or equivalent and/or relevant experience., • Able to lift and carry up to 25 pounds., • Excellent computer skills, • Must be available to work 1st shift, Monday-Friday from 6:30am - 3:00pm Benefits: Aerotech has been advancing industries with our precision motion technology for more than 50 years. Our employees are our future, and we continue to grow by investing in our employees through continuous paid on-the-job training in a clean and climate-controlled environment, while providing the following exceptional benefits and more! • Competitive compensation, • Bi-annual bonus, • Annual raise eligibility, • UPMC Health Insurance, • Dental insurance, • Vision insurance, • Life insurance, • Retirement Plan, • Employee Stock Ownership Trust, • 401k, • Paid time off, • Parental leave, • Referral program, • Professional development assistance, • Tuition reimbursement Must be authorized to work in the US currently and in the future without employer sponsorship. Aerotech is committed to the concept and practice of equal employment opportunity and affirmative action. The Company's policy is to provide equal employment opportunity to all qualified applicants and employees regardless of their race, color, religion, age (40 or over), sex, national origin, disability, or veteran status. This policy applies to recruiting and hiring, training, promotion, compensation, benefits, transfer, layoff, and termination. The Company makes and will continue to make all employment decisions in a non-discriminatory manner. The Company is collecting the information requested in this employment application for purposes of evaluating your suitability for hire by the Company. The Company will share the information that you provide in this employment application only with Company management officials who are involved in the hiring process or who are otherwise involved in making employment-related decisions on behalf of the Company. Powered by JazzHR VcDeUM6iRA

Job Description Electromechanical Production Technician Entry Level - $1,500 Sign-on Bonus! Looking for meaningful work where you can make a difference in global innovation? Engineer a better future with Aerotech, a global leader in precision motion and automation. Our customers create some of the most innovative products on the planet, from life-saving medical devices to tools for deep space exploration. Our precision motion and automation systems make it all possible. Build a lasting, satisfying career at Aerotech, where we foster growth, empower employees and promote from within. You'll find unparalleled opportunities and a company that values your voice. We also provide an extensive total rewards compensation system, including: • Bonus payments every 6 months, • Rich health plans Position Summary: The Electromechanical Production Technician is an entry-level production position that includes roles in various departments including Motors, Core Mechatronics, Electrical Assembly, Wiring and more. This on-the-job training role will align your strengths with a career path customized to your strengths and interests. This is a great opportunity for individuals looking to start or transition to a hands-on technical career. What will your day look like? At Aerotech, you could have the opportunity to: • Experience many different aspects of precision automation manufacturing while training on-the-job alongside experienced motor assembly, electrical, mechanical, and electromechanical technicians, • Participate in a structured career development program intended to provide the skills necessary to become an expert in the precision manufacturing industry, • Read wiring and assembly drawings to determine product requirements, • Assemble cables and cable harnesses using hand tools, power tools, and soldering, • Route and attach wires to circuit boards, connectors, inline splices, and/or subassemblies using solder, crimp, and IDC termination methods, • Assemble and test complex, high precision mechanical and electrical components using a variety of proprietary testing and measurement equipment and software, • Assemble/Wire/Test precision motion systems, • Operate additive manufacturing (3D printing) equipment in the production of Aerotech parts, • Troubleshoot to determine the cause of malfunctioning products, work with peers and supervisors to find a solution, then perform modification and repair when necessary, • Strong mechanical and/or electrical aptitude, • Strong drive to continually advance your career, • Experience with hand tools such as wrenches, hex keys, torque wrenches, screwdrivers, flat stones and pliers, • Ability to read and interpret assembly drawings and schematics, • Soldering skills, including familiarity with IPC-610 / IPC-620 soldering standards, • Effective computer literacy and use of software, such as an ERP system, • Must have a High School Diploma or GED As an Equal Employment Opportunity/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, Veteran or disability status. The Company is collecting the information requested in this employment application for purposes of evaluating your suitability for hire by the Company. The Company will share the information that you provide in this employment application only with Company management officials who are involved in the hiring process or who are otherwise involved in making employment-related decisions on behalf of the Company. Powered by JazzHR qMtZCNhHJS

Job Description We are currently seeking a variety of Wiring Resources for our Low Voltage (LV) Wiring Area and Medium Voltage (MV) Wiring Area, based in our Pittsburgh, PA location. Job hours and location: Shift hours 6am-2:30pm 615 Alpha Drive, Pittsburgh, PA 15238 Job Responsibilities: Complete a variety of wiring and assembly operations to support Benshaw Inc., a 508 UL Panel Shop manufacturing Low and Medium Voltage drives, soft starters, and other control equipment. Under general supervision the use of electronic parts, ohm meters, hand tools and electric tools is required to wire and/or mount parts, fabricate enclosures, assemble stacks, and install power wire and or wire harnesses for various standard products from electrical schematics, mechanical drawings and/or shop instructions while following company workmanship standards. Ability to complete other duties as assigned. This role also involves cross-training opportunities in other departments to enhance skills and support team needs. Minimum Qualifications: • High School Degree or equivalent, • 2-3 years’ demonstrated wiring experience., • Possess an in depth understanding of wire color codes, wire size, schematics, creep and strike distances, measuring, torque tolerance and hardware assembly., • Experience and demonstrated ability to use all tools needed to complete assembly and wiring requirements, including screw drivers, hand tools, sockets, wire crimpers and impact drivers., • Ability to work independently to complete milestones., • Strong commitment to quality, safety, customer service and teamwork., • Demonstrated ability to meet quality and productivity standards within team., • Ability and willingness to lift 40 pounds on occasion throughout a shift., • Ability to stand for long periods of time., • Ability and willingness to complete other duties as assigned., • This role involves cross-training opportunities in other departments to enhance skills and support team needs., • Desired Skills and Experience:, • Good time-management skills and ability to set priorities., • Availability and willingness to work hours as needed to meet critical deadlines., • Previous wiring and/or assembly experience of drives, soft starters, sub-assemblies and/or various components in a panel shop environment. Experience in a 508 UL Panel Shop strongly preferred., • Demonstrated ability in both wiring of control panels and electro mechanical processes for fabricating and assembling control panels., • Technical degree related to wiring or electro mechanical assembly preferred.Since our founding in 1983, Benshaw has grown to become a recognized leader in the design, development and manufacture of mission critical motor controls and drives. That’s why, when the application is critical, and the environment harsh, customers specify Benshaw more than any other brand. Intelligent, creative, and determined people have made us who we are today. We recognize that hiring and developing talent is a key element in our continued growth. We are looking for people with ambition and commitment to excellence to continue to drive these results. If you are looking for a business environment where people treat each other with mutual respect and dignity and each employee can make a difference, Benshaw is the company for you. We offer competitive pay, medical, vision and dental benefits, 401(k) with employer match, as well as a host of other additional health and employee benefits. Equal Employment Opportunity Statement Benshaw is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable laws. We are committed to fostering an inclusive and diverse workplace. *LI Powered by JazzHR 8RnxlwDfcx

Job Description Mine Vision Systems (MVS) is dedicated to providing advanced workflow-integrated perception which improve speed, safety and productivity for the mining industry. We are a spinoff from Carnegie Mellon University’s National Robotics Engineering Center, and are located in Pittsburgh’s East Liberty neighborhood. Following the successful product launch of our FaceCapture™ Mapping System, we are in a growth mode and we are seeking a Sr. Electrical Engineer to join our team. As a Sr. Electrical Engineer, you will be responsible for leading the new and continuous development work for the electrical systems on the FaceCapture™ Mapping System used by our customers in hard rock mining environments You will help bridge cutting-edge robotics research with robust, deployable solutions that work in the harshest real-world conditions. Key Responsibilities • Lead engineering design reviews with internal and external development teams, • Collaborate with other engineering disciplines (mechanical, firmware, software) on performance requirements for new circuit board designs, • Lead relationship with PCBA assembly houses to ensure on time delivery of tested and verified components, • Develop internal and external requirements and specification documents, • Comfortable building a development schedule and planning resource needs to keep projects on track, • Generate system diagrams, electrical schematics, wiring harness diagrams, and assist with assembly and build documentation., • Support field deployments and trials at customer sites (up to ~10% travel). Skills & Qualifications • Minimum 10+ years of experience working with field robotic systems, sensors, or autonomous platforms., • Bachelor’s degree in Electrical Engineering or similarly related field (Master’s degree preferred but not required)., • Circuit Design & Analysis: Analog, digital, and mixed-signal circuit design; PCB layout; simulation tools (Altium Designer preferred), • Testing & Troubleshooting: Oscilloscopes, logic analyzers, multimeters, signal generators, thermal imaging, fault diagnosis, • Soldering Skills: SMT, Through-Hole, desoldering and rework, • Rugged Circuit Design: designing systems that meet electrostatic discharge (ESD) protection standards and human safety compliance requirements, • Networking & Communication Protocols: Modbus, CAN, Ethernet/IP, Profibus, RS-485, • Wiring & Harness Design: Cable routing for dynamic robotic joints, EMI/EMC mitigation, connector selection, and strain relief design, • High speed signal protocol and design: PCIe, USB 3.x, DDR RAM, HDMI, DisplayPort, and Ethernet, • Sensor Integration: Encoders, IMUs, LIDAR, ultrasonic, force/torque sensors, cameras, and proximity sensors, • Veteran of the product development process; defining engineering requirements, DVT engineering process, and manufacturing at scale, • Excellent troubleshooting and debugging skills, • Strong communication skills, initiative, and ability to work across multidisciplinary teams.Nice to Haves, • Previous experience working on products that operate in harsh or operationally demanding environments, • Experience interfacing with electrical systems on industrial vehicles, • Proficient with Jira, Confluence, Git, and Google Workspace tools, • Extensive experience with volume manufacturing of PCBAs (100s of units or more), • Proficiency with embedded debugging tools including JTAG/SWD debuggers Why Join Us? • We are a fast paced and growing company with real robotic hardware in the field around the world, generating actual revenue, • Collaborate with a passionate, multidisciplinary team bringing advanced research into production., • Full benefits: medical, dental, vision, disability, life insurance, 401(k) with match, • Uncounted PTO policy and flexible hybrid work model, • Small team that allows for immediate impact and showcasing of your talents thgJK84YvT

Job DescriptionWaabi, founded by AI pioneer and visionary Raquel Urtasun, is an AI company building the next generation of self-driving technology. With a world class team and an innovative approach that unleashes the power of AI to “drive” safely in the real world, Waabi is bringing the promise of self-driving closer to commercialization than ever before. Waabi is backed by best-in-class investors across the technology, logistics and the Canadian innovation ecosystem. With offices in Toronto, San Francisco, Dallas, and Pittsburgh, Waabi is growing quickly and looking for diverse, innovative and collaborative candidates who want to impact the world in a positive way. To learn more visit: You will...- Be part of a team of multidisciplinary Engineers and Research Scientists using an AI-first approach to enable safe self-driving at scale.- Lead the design and development of automotive-grade electrical distribution systems, including wire harnesses, connectors, load analysis, pin outs and vehicle networks.- Develop complex 3D CAD assemblies that integrate COTS and proprietary hardware across diverse vehicle zones.- Tailor integration strategies for various vehicle platforms (passenger cars to heavy-duty trucks) while adhering to specific technical requirements.- Deliver production-ready 2D and 3D CAD packages, applying GD&T and detailed specifications to ensure precision fabrication. Includes development and upkeep of device transmittals.- Utilize deep knowledge of injection molding, machining, sheet metal, and casting to optimize part design for manufacturability.- Oversee technical implementation from initial prototyping through final vehicle launch, collaborating with build technicians to validate hardware performance.- Resolve complex electromechanical interface issues between proprietary technology and OEM platforms through rigorous diagnostics.- Manage end-to-end subsystem details, including BOMs and mass roll-ups, while ensuring adherence to safety and regulatory standards. Qualifications:- Bachelor of Science in Mechanical, Electrical, or related engineering disciplines.- 5+ years of automotive or aerospace harness assembly design and release experience.- Experience with electrical harness and routing CAD design in the automotive, autonomous vehicle industry or equivalent.- Experience / understanding with harness sub-components, rapid proto-harnessing sub-assembly, and form-board production assembly processes.- Hands-on experience and willingness to build rapid-prototypes, including supporting the procurement of necessary components.- Effective ability to package harness in 3D virtual environment, understanding. non-compliant ergonomics, tach-times, and vehicle assembly sequencing.- Experience packaging harnesses with consideration of communication protocol circuits (ex: CAN/LIN/Base T-1000/video, lighting signals, etc.).- Industry standard knowledge of design verification testing required for various Harness Assemblies.- Strong 2D CAD experience and proficiency with Zuken, Capital, MentorGraphics, Arcadia, or etc.- Ability to interface with connector, PDC, vehicle architecture and systems engineers to manage all electrical aspects of wiring design.- Proficient in Google Workspace (formerly Google Suite).- Open-minded and collaborative team player with the willingness to help others.- Passionate about self-driving technologies, solving hard problems, and creating innovative solutions. The US yearly salary range for this role is: $155,000 - $230,000 USD in addition to competitive perks & benefits. Waabi US Inc.’s yearly salary ranges are determined based on several factors in accordance with the Company’s compensation practices. Note: The Company provides additional compensation for employees in this role, including equity incentive awards and an annual performance bonus.Perks/Benefits:- Competitive compensation and equity awards.- Health and Wellness benefits encompassing Medical, Dental and Vision coverage (for full-time employees only).- Unlimited Vacation.- Flexible hours and Work from Home support.- Daily drinks, snacks and catered meals (when in office).- Regularly scheduled team building activities and social events both on-site, off-site & virtually.- As we grow, this list continues to evolve! Waabi is a technology start-up building technologies to transform the way the world moves. Join our talented team to be a part of the future and to make an impact! Waabi is an equal opportunity employer. We celebrate diversity and are committed to creating a supportive, inclusive, and accessible workplace for all our employees. We seek applicants of all backgrounds and identities, across race, color, ethnicity, national origin or ancestry, age, citizenship, religion, sex, sexual orientation, gender identity or expression, military or veteran status, marital status, pregnancy or parental status, caregiver status, disability, or any other characteristic protected by law. We make workplace accommodations for qualified individuals with disabilities as required by applicable law. If reasonable accommodation is needed to participate in the job application or interview process please let our recruiting team know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJob hours and location: Shift hours 6am-2:30pm 615 Alpha Drive, Pittsburgh, PA 15238 Position Overview: Under general supervision, uses hand tools and electric tools to mount parts, fabricate sheet metal enclosures, assemble power stacks and install power wire and/or wire harness for various products according to job shop instructions and by following the company's workmanship standards. Possess the basic understanding of measuring to 1/32nd of an inch with a temp measurer, torque tolerance and hardware assembly. Complete other duties as assigned. This role involves cross-training opportunities in other departments to enhance skills and support team needs. Minimum Qualifications: • High School Degree or equivalent, • 0-2 years’ demonstrated fabrication, sheet metal, carpentry or related experience., • Possess the basic understanding of measuring, torque tolerance and hardware assembly., • Ability to work independently to complete milestones., • Demonstrated ability to meet quality and productivity standards within team., • Good time-management skills and ability to set priorities., • Availability and willingness to work hours as needed to meet critical deadlines., • Strong commitment to quality, safety, customer service and teamwork.Since our founding in 1983, Benshaw has grown to become a recognized leader in the design, development and manufacture of mission critical motor controls and drives. That’s why, when the application is critical, and the environment harsh, customers specify Benshaw more than any other brand. Intelligent, creative, and determined people have made us who we are today. We recognize that hiring and developing talent is a key element in our continued growth. We are looking for people with ambition and commitment to excellence to continue to drive these results. If you are looking for a business environment where people treat each other with mutual respect and dignity and each employee can make a difference, Benshaw is the company for you. We offer competitive pay, medical, vision and dental benefits, 401(k) with employer match, as well as a host of other additional health and employee benefits. Equal Employment Opportunity Statement Benshaw is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable laws. We are committed to fostering an inclusive and diverse workplace.*LI Powered by JazzHR oOWrsDnkoi

Job Description Wiring Assembler - Systems - Up to a $3,000 Sign-On Bonus! Looking for meaningful work where you can make a difference in global innovation? Engineer a better future with Aerotech, a global leader in precision motion and automation. Our customers create some of the most innovative products on the planet, from life-saving medical devices to tools for deep space exploration. Our precision motion and automation systems make it all possible. Build a lasting, satisfying career at Aerotech, where we foster growth, empower employees and promote from within. You'll find unparalleled opportunities and a company that values your voice. We also provide an extensive total rewards compensation system, including: • Bonus payments every 6 months, • Rich health plans What will your day look like? At Aerotech, you will: • Assembles cables and cable harnesses using hand tools, power tools, and soldering, • Reads wiring and assembly drawings, • Routes and attaches wires and connectors to electronic circuitry and/or subassemblies, • Utilizes test equipment to test for conformance, • Wires system level motors and stages, • Excellent soldering skills, preference to have familiarity with IPC-620 soldering standards, • Ability to read and interpret wiring assembly drawings, • Experience with hand tools and crimpers, • Effective computer literacy, including experience with ERP Software, • High school diploma or GED, • One to five years of related experience, • Vocational or technical school training is preferred, but not required Aerotech has been advancing industries with our precision motion technology for more than 50 years. Our employees are our future, and we continue to grow by investing in our employees through continuous paid on-the-job training in a clean and climate-controlled environment, while providing the following exceptional benefits and more! • Competitive compensation, • Bi-annual bonus, • Annual raise eligibility, • UPMC Health Insurance, • Dental insurance, • Vision insurance, • Life insurance, • Retirement Plan, • Employee Stock Ownership Trust, • 401k, • Paid time off, • Parental leave, • Referral program, • Professional development assistance Aerotech is committed to the concept and practice of equal employment opportunity and affirmative action. The Company's policy is to provide equal employment opportunity to all qualified applicants and employees regardless of their race, color, religion, age (40 or over), sex, national origin, disability, or veteran status. This policy applies to recruiting and hiring, training, promotion, compensation, benefits, transfer, layoff, and termination. The Company makes and will continue to make all employment decisions in a non-discriminatory manner. The Company is collecting the information requested in this employment application for purposes of evaluating your suitability for hire by the Company. The Company will share the information that you provide in this employment application only with Company management officials who are involved in the hiring process or who are otherwise involved in making employment-related decisions on behalf of the Company. Powered by JazzHR zJ39yskqvY

Job DescriptionDescription: About us: For over 70 years, Tri-Arc Manufacturing has been offering state-of-the-art, steel configurable ladder and platform products. Located 20 minutes from downtown Pittsburgh, Tri-Arc proudly carries on Pittsburgh’s steel city industrial history by manufacturing our products at home in the U.S. Tri-Arc is an industry leader with the widest variety and highest quality of custom fabricated climbing products, specializing in the U-Design Configurable Products tailoring to the needs of our customers to operate safely and efficiently. Tri-Arc has immediate openings for 2nd Shift Assembly & Paint Line Technicians, Monday to Friday, 2:30 pm to 10:30 pm (may change to 2:00 pm to 10:00 pm). These are full-time positions, and Tri-Arc offers a competitive starting rate along with a generous benefit package, opportunity for career growth, and the ability to join the United Steelworkers Union after a probationary period. This is an excellent opportunity for someone who enjoys hands-on, challenging work and wants to gain high-quality manufacturing experience in a fast-paced environment. Essential Functions: • Assemble products by bolting, clipping, screwing, cementing, and fastening parts together, • Tend machines such as nut drivers and riveting machines to perform force-fitting and fastening operations, • Repair products by dismantling, straightening, reshaping, and reassembling parts, • Spray-manufactured products with protective coating, powder, and paint, • Operate spray guns filled with paint, powder, and other liquids to coat products, • Perform visual inspections to ensure quality and finish standards are met, • Maintain a clean and organized work area, • Alternate between assembly and paint line operations as production needs require, • Other duties as assigned Experience & Qualifications: • 6+ months of general labor or manufacturing experience, • Experience with hand tools (drills, grinders, etc.) is helpful but not required, • Ability to stand, walk, kneel, stoop, or sit for extended periods of time, • Must be capable of working in environments with extreme hot or cold temperatures, • Competitive Starting Rate ($24.93/hour), • PTO, • Medical, Dental, Vision, • 401K plan, • Referral program, • Friendly, Collaborative Team Environment, • Personal and Professional Growth Potential As a unionized workplace, Triarc Manufacturing values collaboration with our union partners to ensure fair treatment, equitable opportunities, and respect for the rights of all employees. Employment decisions at Triarc Manufacturing are based on business needs, job requirements, and individual qualifications. We are dedicated to fostering a safe, diverse, and supportive work environment where every employee can contribute to our shared success. Requirements:

Job DescriptionDescription: About us:For over 70 years, Tri-Arc Manufacturing has been offering state-of-the-art, steel configurable ladder and platform products. Located 20 minutes from downtown Pittsburgh, Tri-Arc proudly carries on Pittsburgh’s steel city industrial history by manufacturing our products at home in the U.S. Tri-Arc is an industry leader with the widest variety and highest quality of custom fabricated climbing products, specializing in the U-Design Configurable Products tailoring to the needs of our customers to operate safely and efficiently. Tri-Arc has immediate openings for 1st Shift Assembly & Paint Line Technicians, 6:00 am to 2:30 pm, Monday to Friday. These are full-time positions, and Tri-Arc offers a competitive starting rate along with a generous benefit package, opportunity for career growth, and the ability to join the United Steelworkers Union after a probationary period.This is an excellent opportunity for someone who enjoys hands-on, challenging work and wants to gain high-quality manufacturing experience in a fast-paced environment. Essential Functions: • Assemble products by bolting, clipping, screwing, cementing, and fastening parts together, • Tend machines such as nut drivers and riveting machines to perform force-fitting and fastening operations, • Repair products by dismantling, straightening, reshaping, and reassembling parts, • Spray-manufactured products with protective coating, powder, and paint, • Operate spray guns filled with paint, powder, and other liquids to coat products, • Perform visual inspections to ensure quality and finish standards are met, • Maintain a clean and organized work area, • Alternate between assembly and paint line operations as production needs require, • 6+ months of general labor or manufacturing experience, • Experience with hand tools (drills, grinders, etc.) is helpful but not required, • Ability to stand, walk, kneel, stoop, or sit for extended periods of time, • Must be capable of working in environments with extreme hot or cold temperatures, • Competitive Starting Rate ($24.93/hour), • PTO, • Medical, Dental, Vision, • 401K plan, • Referral program, • Friendly, Collaborative Team Environment, • Personal and Professional Growth Potential As a unionized workplace, Triarc Manufacturing values collaboration with our union partners to ensure fair treatment, equitable opportunities, and respect for the rights of all employees. Employment decisions at Triarc Manufacturing are based on business needs, job requirements, and individual qualifications. We are dedicated to fostering a safe, diverse, and supportive work environment where every employee can contribute to our shared success. Requirements:

Job DescriptionDescription: About us:For over 70 years, Tri-Arc Manufacturing has been offering state-of-the-art, steel configurable ladder and platform products. Located 20 minutes from downtown Pittsburgh, Tri-Arc proudly carries on Pittsburgh’s steel city industrial history by manufacturing our products at home in the U.S. Tri-Arc is an industry leader with the widest variety and highest quality of custom fabricated climbing products, specializing in the U-Design Configurable Products tailoring to the needs of our customers to operate safely and efficiently. Tri-Arc has immediate openings for 2nd Shift Assembly & Paint Line Technicians, Monday to Friday,2:30 pm to 10:30 pm (may change to 2:00 pm to 10:00 pm). These are full-time positions, and Tri-Arc offers a competitive starting rate along with a generous benefit package, opportunity for career growth, and the ability to join the United Steelworkers Union after a probationary period. This is an excellent opportunity for someone who enjoys hands-on, challenging work and wants to gain high-quality manufacturing experience in a fast-paced environment. Essential Functions: • Assemble products by bolting, clipping, screwing, cementing, and fastening parts together, • Tend machines such as nut drivers and riveting machines to perform force-fitting and fastening operations, • Repair products by dismantling, straightening, reshaping, and reassembling parts, • Spray-manufactured products with protective coating, powder, and paint, • Operate spray guns filled with paint, powder, and other liquids to coat products, • Perform visual inspections to ensure quality and finish standards are met, • Maintain a clean and organized work area, • Alternate between assembly and paint line operations as production needs require, • 6+ months of general labor or manufacturing experience, • Experience with hand tools (drills, grinders, etc.) is helpful but not required, • Ability to stand, walk, kneel, stoop, or sit for extended periods of time, • Must be capable of working in environments with extreme hot or cold temperatures, • Competitive Starting Rate ($23.97/hour), • PTO, • Medical, Dental, Vision, • 401K plan, • Referral program, • Friendly, Collaborative Team Environment, • Personal and Professional Growth Potential As a unionized workplace, Triarc Manufacturing values collaboration with our union partners to ensure fair treatment, equitable opportunities, and respect for the rights of all employees. Employment decisions at Triarc Manufacturing are based on business needs, job requirements, and individual qualifications. We are dedicated to fostering a safe, diverse, and supportive work environment where every employee can contribute to our shared success. Requirements:

Job Description Entry-Level Project Manager Thank you for your interest in joining the Phillips Tank & Structure team! We design, engineer, construct, and repair above-ground steel storage tanks and other related structures. Headquartered in Braddock, Pennsylvania, Phillips Tank is a growing company with a family-like culture. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels markets, throughout the United States. Phillips Tank utilizes state-of-the-art 3D modelling software to produce detailed design and fabrication drawings that are the best in the industry. Job Summary The Entry-Level Project Manager supports industrial and commercial, metals fabrication projects from estimate through delivery, ensuring parts and assemblies are produced accurately, on schedule, and within budget. This role works closely with engineering, production, and clients to coordinate schedules, track milestones, and resolve issues for the fabrication shop and local field installation projects. The ideal candidate is a collaborative teammate who learns quickly, asks thoughtful questions, and thrives in a fast-paced, fully-custom, shop environment.Compensation:Commensurate with experience. Included is an IT Allowance of $35 per month, plus a company laptop computer. Eligible for year-end bonus.Benefits:Competitive Benefits. Available on the 1st of the month after a 30-day waiting period from the hire date. Phillips Tank pays approximately 60% and employees pay 40% of medical benefits premiums. Employees pay 100% for all other voluntary benefits. Paid Time Off. Status:Full-time/Salaried (Overtime Exempt).NOTE:Compensation, benefits, and other position details are subject to Phillips Tank’s policies and procedures. Responsibilities • Receive inquiries from customers about new work. Communicate with customers and internal teammates to determine the proper bidding approach. Review drawings and specifications; identify gaps or conflicts and seek clarification., • Develop accurate and timely cost estimates., • Develop detailed proposals for selling projects and agreements for our customers., • Set up and kick-off newly sold projects and communicate the pertinent details of the project to the project team. Set up and maintain the project files in a way that fosters teamwork, uniformity, and transparency., • Promote efficient and accurate schedule communication ensuring projects are well represented in any scheduling document, spreadsheet or tools., • Manage the change order process., • Assist with site measurements and pre-bid job walks to maintain customer and vendor relationship., • Initiate accounts receivable invoices. Ensure that the invoices are accurate and timely. Assist in collections as needed., • Complete job cost forecasting quarterly and review project financials. Gain and maintain a solid understanding of the financial performance of your projects. Utilize financial lessons learned from each project to benefit the Company., • Education: Bachelor’s degree in engineering, industrial technology, construction management, business or equivalent experience., • Experience: 0–5 years in fabrication, manufacturing, construction or project coordination., • Technical Skills:, • Proficiency with Microsoft Word & Excel, internet software and email, • Ability to read fabrication drawings and interpret technical specifications, • Familiarity with Computer Aided Design (CAD), • Basic understanding of welding, machining, cutting or assembly processes, • Experience in a fabrication or machine shop environment, • Exposure to lean manufacturing, continuous improvement, quality control or production scheduling, • Teamwork & Collaboration:, • Proven team player with clear and respectful communication skills, • Curious and eager to learn new tools, processes and industry standards, • Site & Field Work:, • Willingness to visit project sites, assess conditions, and interact with field teams, • Comfortable with physical tasks like climbing ladders and using measuring tools, • Problem Solving & Decision Making:, • Strong problem-solving mindset with the initiative to dig into issues and propose solutions, • Documentation & Organization:, • Capable of maintaining accurate project records, reports, and drawing packages Powered by JazzHR mCNMyGfkZk

Job Description Metrology Technician - Systems - Up to $3,000 Sign-On Bonus! Looking for meaningful work where you can make a difference in global innovation? Engineer a better future with Aerotech, a global leader in precision motion and automation. Our customers create some of the most innovative products on the planet, from life-saving medical devices to tools for deep space exploration. Our precision motion and automation systems make it all possible. Build a lasting, satisfying career at Aerotech, where we foster growth, empower employees and promote from within. You'll find unparalleled opportunities and a company that values your voice. We also provide an extensive total rewards compensation system, including: • Bonus payments every 6 months, • Rich health plans, • Retirement planning with our 100% company-paid Employee Stock Ownership Trust If you’re mechanically inclined or technically savvy with a passion for cutting-edge technology, we want to hear from you. What will your day look like? At Aerotech, you will: • Tests electro-mechanical systems in a temperature controlled environment using laser interferometers, autocollimators, capacitance probes, and other precision measuring tools, • Aligns stages and systems using granite squares, electronic indicators, precision levels and alignment scopes, • Troubleshoots testing set-ups, equipment and the assembly of systems to achieve specifications, • Performs delicate adjustments of interrelated parts and assembles to extremely close tolerances on electro-mechanical assemblies, as well as modifications and repair of products, • Reads application and engineering specifications, control plans, work instructions, assembly drawings and receives verbal instruction regarding work assignments What will separate you from the rest? Experience with: • Strong mechanical aptitude, • System level troubleshooting, • Ability to use calipers, micrometers, and capacitance probes, • Autocollimators and laser interferometers, • Effective computer literacy, including experience with ERP Software Minimum Qualifications: • High School Diploma or GED required, • One to five years of related experience and/or training, • Qualified candidates must have experience using tools, such as drill press and hand power tools, • Able to lift and carry up to 50 pounds., • Excellent computer skills Benefits: Aerotech has been advancing industries with our precision motion technology for more than 50 years. Our employees are our future, and we continue to grow by investing in our employees through continuous paid on-the-job training in a clean and climate-controlled environment, while providing the following exceptional benefits and more! • Competitive compensation, • Bi-annual bonus, • Annual raise eligibility, • UPMC Health Insurance, • Dental insurance, • Vision insurance, • Life insurance, • Retirement Plan, • Employee Stock Ownership Trust, • 401k, • Paid time off, • Parental leave, • Referral program, • Professional development assistance, • Tuition reimbursement Must be authorized to work in the US currently and in the future without employer sponsorship. As an Equal Employment Opportunity/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, Veteran or disability status. The Company is collecting the information requested in this employment application for purposes of evaluating your suitability for hire by the Company. The Company will share the information that you provide in this employment application only with Company management officials who are involved in the hiring process or who are otherwise involved in making employment-related decisions on behalf of the Company. Powered by JazzHR RsIJ1xDy54

Job Description The Brick Mason is responsible to safely, productively, and professionally install all types of CMU and brick units as designated by the contract documents as well as safely erect, dismantle and maintain all types of scaffolding systems. The mason is required to install all CMU units in accordance with best building practices to ensure a complete water-tight masonry assembly that is compliant with the contract documents. The Mason is responsible for initial layout, plumb and level construction/installation of all CMU related units; mixing of mortars and grouts as needed; assisting in stocking of building materials; erection, dismantling and maintenance of all scaffolding systems; operate associated equipment to perform daily construction activities and final wash-down of completed installations; including floors, sidewalks, roadways, steps, and curbs. This position is expected to work within a 90-mile radius of the city of Pittsburgh, and will be an employee of the Pittsburgh, PA office location. Our Success Story: It all started in 1997 when Joe Leonello and his father started their own construction firm. They were soon joined by Joe's brother, Frank, in 2003 and, thus, the Franjo legacy was born. Since its inception, we strive to exceed our client expectations by consistently improving our products and services. We are always on the lookout for the top talent in the industry as we consider our employees one of our greatest assets. We truly celebrate our employee milestones and successes in our industry because without our employees, we would not be where we are today! We have been voted Top Workplace by our employees for 4 years in a row and have also been featured in the Pittsburgh Business Times as one of Pittsburgh's Fastest Growing Companies, Largest Area Construction Contractors, and Family Business Awards winners! Our Mission Safety, Respect, Accountability, Efficiency, Empowerment, Creativity, Loyalty... We feel strongly about every one of those, but we also feel they are the minimum every company should abide by. So, what makes us different? How do Franjo team members operate? Well, we speak to each other with radical candor. We work hard so we can play hard. We have each other's backs. We are committed to building a legacy - the Franjo Legacy. Our Mission: Uniting our team and customers to build the future. Our Vision: Exceeding expectations. Building trust. Creating value. Our Values: Persistence - Never give up. Ambition - Driven to achieve the unimaginable. Confidence - Humble enough to learn from experience. Does that align with your ideals and core values? Well, great news! We are looking to add a Brick Mason to our growing team! What you'll do: • Ability to safely, productively, and professionally install various types of CMU units including but not limited to 4, 6, 8, 10, 12 and 16" CMU as well as all brick types including proper layout, installation, and wash-down procedures., • Operate equipment as needed for daily construction activities, i.e., mixers, forklifts, telehandlers etc., • Operate equipment as needed for daily construction activities, i.e., mixers, forklifts, telehandlers etc., • Safely erect, maintain, work, and dismantle all scaffolding systems required to perform daily construction activities., • Must be familiar with and perform the general daily maintenance of all equipment, i.e., fueling, lubrication, etc., • Must perform general daily safety inspections to all equipment prior to use., • Knowledge of general building structures and foundations., • Knowledge of elevations, grades and concrete foundation structures and installation procedures., • Knowledge of masonry drainage systems and concrete footing designs., • Responsible for daily production quantities, i.e., 8" CMU (180-200 units per day), 10" CMU (160-180 units per day), 12' CMU (140-160 units per day) Brick (400 units per day)., • Operate all types of hand tools, saws, and equipment for cutting CMU units., • Maintain required production units as outlined by the project schedule., • Perform general carpentry items to assist with temporary enclosures for in climate weather work., • Assist in loading and unloading building material., • Provide input on jobsite logistics, organization, layout, equipment, and manpower utilization., • Establish and enforce a comprehensive project safety and security program as defined in the company safety program in accordance with all applicable safety codes and regulations., • Adheres to company comprehensive project safety and security programs as defined in the company safety program in accordance with all applicable safety codes and regulations., • Provides timely and cordial interaction with supporting work groups, such as Superintendent, Estimating, Project Management, Operations, Human Resources, etc., • Meet with the Safety Director and complete mandatory safety training prior to start of employment., • Results driven., • Strong project and time management skills. Completion of apprentice/vocational program or an equivalent combination of training/education or a minimum of 5 years of field experience in the masonry trade. What we offer you in return: Competitive salary and benefits package which includes, medical, dental, and vision, 401(k), employee wellness, supplemental insurance, paid time off, education and training, quarterly jobsite lunches, holiday parties, and so much more! Do you have additional questions? Please reach out to our Human Resources Manager for more information! What are you waiting for? Apply today! Franjo Construction Corporation is an Equal Opportunity Employer. Prohibited by the Company include, but are not limited to, the following: Any misrepresentation of facts or falsification of records, including falsification of employment applications, resumes or any Company pre- or postemployment forms, and any other form of dishonesty. Must be able to pass a 7 year background check. We also conduct pre-employment drug testing. Job offers are contingent upon the successful completion of a background investigation and pre-employment drug screen.

Job Description Looking for meaningful work where you can make a difference in global innovation? Engineer a better future with Aerotech, a global leader in precision motion and automation. Our customers create some of the most innovative products on the planet, from life-saving medical devices to tools for deep space exploration. Our precision motion and automation systems make it all possible. Build a lasting, satisfying career at Aerotech, where we foster growth, empower employees and promote from within. You'll find unparalleled opportunities and a company that values your voice. We also provide an extensive total rewards compensation system, including: • Bonus payments every 6 months, • Rich health plans, • Retirement planning with our 100% company-paid Employee Stock Ownership Trust If you’re mechanically inclined or technically savvy with a passion for cutting-edge technology, we want to hear from you. Position Summary: Designs and develops embedded software for Aerotech's motion control and high-precision automation products. The controller software runs within a Linux based or Windows based real-time operating system and uses an embedded DSP, ARM, or Intel processor. Essential Functions: • Designs, implements, and maintains various software features of the embedded software. Examples include motion control and path planning, user program task scheduling, device driver development, communicating data to and from network devices, developing software to operate on multiple cores, and interfacing with Linux/Windows operating systems and embedded hardware., • Interacts with engineers in a team environment to debug complex, time-critical problems, implement new features, and participate in all phases of the software development life cycle., • Uses critical thinking and math skills to debug problems with our products and develop solutions to these problems, • Conducts tests to verify the implementation of new features and the proper operation of our motion control products, • Provides and reviews technical documentation, • Quickly adapts to different technologies and project/product contexts, • Thrives in a team environment and works well independently, • Ensures our software meets or exceeds Aerotech’s quality standards Minimum Qualifications: • Bachelor of Science (BS) or Master of Science (MS) degree in Computer Engineering, Computer Science, Software Engineering, or Electrical Engineering from an accredited college or university, • Zero to ten years of relevant work experience, • Equivalent combination of education and experience may be considered, • Thorough knowledge of C or C++ programming, • Thorough knowledge of an object-oriented (e.g., C++, C#, Java) programming language, • Must be authorized to work in the United States without sponsorship. Aerotech does not provide US work authorization sponsorship for this position. OPT and CPT visa holders are not eligible for employment if they will need work authorization sponsorship at any time in the future., • Experience or working knowledge in one or more of the following areas is a plus:, • Robotics, path planning, or servo systems, • Device drivers, real-time operating systems, or assembly code, • Developing or debugging on a Linux based platform, • Compiler and interpreter design As part of our engineer development program, your position will include work experiences (via short-term rotations) in related engineering roles (typically in different departments). Any such rotations will be arranged with your supervisor - aligning your interests with business needs as available. Benefits Aerotech has been advancing industries with our precision motion technology for more than 50 years. Our employees are our future, and we continue to grow by investing in our employees through continuous paid on-the-job training in a clean and climate-controlled environment, while providing the following exceptional benefits and more! • Competitive compensation, • Bi-annual bonus, • Annual raise eligibility, • UPMC Health Insurance, • Dental insurance, • Vision insurance, • Life insurance, • Retirement Plan, • Employee Stock Ownership Trust, • 401k, • Paid time off, • Parental leave, • Referral program, • Professional development assistance, • Tuition reimbursement As an Equal Employment Opportunity/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, Veteran or disability status. The Company is collecting the information requested in this employment application for purposes of evaluating your suitability for hire by the Company. The Company will share the information that you provide in this employment application only with Company management officials who are involved in the hiring process or who are otherwise involved in making employment-related decisions on behalf of the Company. Powered by JazzHR arVjUfo5D2

Job Description Entry-Level Fabrication Sales Representative Thank you for your interest in joining the Phillips Tank & Structure team! We design, engineer, construct, and repair above-ground steel storage tanks and other related structures. Headquartered in Braddock, Pennsylvania, Phillips Tank is a growing company with a family-like culture. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels markets, throughout the United States. Phillips Tank utilizes state-of-the-art 3D modelling software to produce detailed design and fabrication drawings that are the best in the industry. Job Summary The Entry-Level Fabrication Sales Representative supports industrial and commercial, metals fabrication projects from estimate through delivery, ensuring parts and assemblies are produced accurately, on schedule, and within budget. This role works closely with engineering, production, and clients to coordinate schedules, track milestones, and resolve issues for the fabrication shop and local field installation projects. The ideal candidate is a collaborative teammate who learns quickly, asks thoughtful questions, and thrives in a fast-paced, fully-custom, shop environment.Compensation:Commensurate with experience. Included is an IT Allowance of $35 per month, plus a company laptop computer. Eligible for year-end bonus.Benefits:Competitive Benefits. Available on the 1st of the month after a 30-day waiting period from the hire date. Phillips Tank pays approximately 60% and employees pay 40% of medical benefits premiums. Employees pay 100% for all other voluntary benefits. Paid Time Off. Status:Full-time/Salaried (Overtime Exempt).NOTE:Compensation, benefits, and other position details are subject to Phillips Tank’s policies and procedures. Responsibilities • Receive inquiries from customers about new work. Communicate with customers and internal teammates to determine the proper bidding approach. Review drawings and specifications; identify gaps or conflicts and seek clarification., • Develop accurate and timely cost estimates., • Develop detailed proposals for selling projects and agreements for our customers., • Set up and kick-off newly sold projects and communicate the pertinent details of the project to the project team. Set up and maintain the project files in a way that fosters teamwork, uniformity, and transparency., • Promote efficient and accurate schedule communication ensuring projects are well represented in any scheduling document, spreadsheet or tools., • Manage the change order process., • Assist with site measurements and pre-bid job walks to maintain customer and vendor relationship., • Initiate accounts receivable invoices. Ensure that the invoices are accurate and timely. Assist in collections as needed., • Complete job cost forecasting quarterly and review project financials. Gain and maintain a solid understanding of the financial performance of your projects. Utilize financial lessons learned from each project to benefit the Company., • Education: Bachelor’s degree in engineering, industrial technology, construction management, business or equivalent experience., • Experience: 0–5 years in fabrication, manufacturing, construction or project coordination., • Technical Skills:, • Proficiency with Microsoft Word & Excel, internet software and email, • Ability to read fabrication drawings and interpret technical specifications, • Familiarity with Computer Aided Design (CAD), • Basic understanding of welding, machining, cutting or assembly processes, • Experience in a fabrication or machine shop environment, • Exposure to lean manufacturing, continuous improvement, quality control or production scheduling, • Teamwork & Collaboration:, • Proven team player with clear and respectful communication skills, • Curious and eager to learn new tools, processes and industry standards, • Site & Field Work:, • Willingness to visit project sites, assess conditions, and interact with field teams, • Comfortable with physical tasks like climbing ladders and using measuring tools, • Problem Solving & Decision Making:, • Strong problem-solving mindset with the initiative to dig into issues and propose solutions, • Documentation & Organization:, • Capable of maintaining accurate project records, reports, and drawing packages Powered by JazzHR AsZQLvFVKI

Job Description Entry-Level Industrial Sales Representative Thank you for your interest in joining the Phillips Tank & Structure team! We design, engineer, construct, and repair above-ground steel storage tanks and other related structures. Headquartered in Braddock, Pennsylvania, Phillips Tank is a growing company with a family-like culture. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels markets, throughout the United States. Phillips Tank utilizes state-of-the-art 3D modelling software to produce detailed design and fabrication drawings that are the best in the industry. Job Summary The Entry-Level Industrial Sales Representative supports industrial and commercial, metals fabrication projects from estimate through delivery, ensuring parts and assemblies are produced accurately, on schedule, and within budget. This role works closely with engineering, production, and clients to coordinate schedules, track milestones, and resolve issues for the fabrication shop and local field installation projects. The ideal candidate is a collaborative teammate who learns quickly, asks thoughtful questions, and thrives in a fast-paced, fully-custom, shop environment.Compensation:Commensurate with experience. Included is an IT Allowance of $35 per month, plus a company laptop computer. Eligible for year-end bonus.Benefits:Competitive Benefits. Available on the 1st of the month after a 30-day waiting period from the hire date. Phillips Tank pays approximately 60% and employees pay 40% of medical benefits premiums. Employees pay 100% for all other voluntary benefits. Paid Time Off. Status:Full-time/Salaried (Overtime Exempt).NOTE:Compensation, benefits, and other position details are subject to Phillips Tank’s policies and procedures. Responsibilities • Receive inquiries from customers about new work. Communicate with customers and internal teammates to determine the proper bidding approach. Review drawings and specifications; identify gaps or conflicts and seek clarification., • Develop accurate and timely cost estimates., • Develop detailed proposals for selling projects and agreements for our customers., • Set up and kick-off newly sold projects and communicate the pertinent details of the project to the project team. Set up and maintain the project files in a way that fosters teamwork, uniformity, and transparency., • Promote efficient and accurate schedule communication ensuring projects are well represented in any scheduling document, spreadsheet or tools., • Manage the change order process., • Assist with site measurements and pre-bid job walks to maintain customer and vendor relationship., • Initiate accounts receivable invoices. Ensure that the invoices are accurate and timely. Assist in collections as needed., • Complete job cost forecasting quarterly and review project financials. Gain and maintain a solid understanding of the financial performance of your projects. Utilize financial lessons learned from each project to benefit the Company., • Education: Bachelor’s degree in engineering, industrial technology, construction management, business or equivalent experience., • Experience: 0–5 years in fabrication, manufacturing, construction or project coordination., • Technical Skills:, • Proficiency with Microsoft Word & Excel, internet software and email, • Ability to read fabrication drawings and interpret technical specifications, • Familiarity with Computer Aided Design (CAD), • Basic understanding of welding, machining, cutting or assembly processes, • Experience in a fabrication or machine shop environment, • Exposure to lean manufacturing, continuous improvement, quality control or production scheduling, • Teamwork & Collaboration:, • Proven team player with clear and respectful communication skills, • Curious and eager to learn new tools, processes and industry standards, • Site & Field Work:, • Willingness to visit project sites, assess conditions, and interact with field teams, • Comfortable with physical tasks like climbing ladders and using measuring tools, • Problem Solving & Decision Making:, • Strong problem-solving mindset with the initiative to dig into issues and propose solutions, • Documentation & Organization:, • Capable of maintaining accurate project records, reports, and drawing packages Powered by JazzHR eeKzMtfgsQ

Job Description Mechatronics Technician Trainee - $1,500 Sign-On Bonus! Looking for meaningful work where you can make a difference in global innovation? Engineer a better future with Aerotech, a global leader in precision motion and automation. Our customers create some of the most innovative products on the planet, from life-saving medical devices to tools for deep space exploration. Our precision motion and automation systems make it all possible. Build a lasting, satisfying career at Aerotech, where we foster growth, empower employees and promote from within. You'll find unparalleled opportunities and a company that values your voice. We also provide an extensive total rewards compensation system, including: • Bonus payments every 6 months, • Rich health plans Position Summary The Mechatronics Technician Trainee is an entry-level production position where successful candidates will participate in the Core Mechatronics Career Development Program. This (fully paid) on-the-job training program will align your skills with a career path customized to your strengths and interests. Participants will work within the Core Mechatronics Production department. For highly motivated individuals with a strong desire to learn, this is an excellent opportunity to launch or transition into a hands-on technical career. What will your day look like? At Aerotech, you will • Participate in a structured training program intended to provide the skills necessary to become an expert in the precision manufacturing industry under the guidance of experienced training and leadership staff., • Integrate theory with practical hands-on skills through written training material and direct coaching from leadership., • Read wiring and assembly drawings to determine product requirements, • Master industry required skills such as precision measurement, alignments, and advanced troubleshooting., • Assemble and test complex, high precision mechanical and electrical components using a variety of testing, measurement equipment and software, • Assemble/Wire/Test precision motion systems., • Operate additive manufacturing (3D printing) equipment in the production of Aerotech parts., • Attend and actively contribute to bi-weekly progress meetings to engage in feedback exchange with training personnel., • Strong mechanical and/or electrical aptitude, • Strong drive to continually advance your career, • Experience with hand tools such as wrenches, hex keys, torque wrenches, screwdrivers, flat stones and pliers, • Ability to read and interpret assembly drawings and schematics, • Effective computer literacy and use of software, such as an ERP system, • Troubleshooting and problem solving skills Aerotech has been advancing industries with our precision motion technology for more than 50 years. Our employees are our future, and we continue to grow by investing in our employees through continuous paid on-the-job training in a clean and climate-controlled environment, while providing the following exceptional benefits and more! • Competitive compensation, • Bi-annual bonus, • Annual raise eligibility, • UPMC Health Insurance, • Dental insurance, • Vision insurance, • Life insurance, • Retirement Plan, • Employee Stock Ownership Trust, • 401k, • Paid time off, • Parental leave, • Monday to Friday standard schedule, • Optional overtime - including Saturdays, • Referral program, • Professional development assistance As an Equal Employment Opportunity/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, Veteran or disability status. The Company is collecting the information requested in this employment application for purposes of evaluating your suitability for hire by the Company. The Company will share the information that you provide in this employment application only with Company management officials who are involved in the hiring process or who are otherwise involved in making employment-related decisions on behalf of the Company. Powered by JazzHR 7VIRYywbsH

Job Description Calgon Carbon | A Kuraray Company is growing—and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Position: Inventory Control Group Leader Location: Equipment & Assembly Plant – Pittsburgh, PA Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) – Generous Company Match! Perks: Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hours of work: Mondays - Fridays, 7:30 AM -4:00 PM, 40 Hours/Week The Inventory Control Group Leader will execute daily MRP using SAP, create part numbers/material masters, enter purchasing requisition, spare parts orders, field service requests, and is responsible for conducting and reporting annual physical inventory. The Inventory Control Group Leader will also direct the daily activities of workers in one or more of the functional areas of the Equipment & Assembly Plant which include: Part Room / Shipping & Receiving, Inventory & cycle counts, Mechanical Assembly both direct reports and as fill-in for absent Group Leader II. Typically, this position will supervise 2-10 workers. Duties and Responsibilities (not limited to) • Understands and develops safe job procedures, trains employees and enforces all policies and procedures, • Maintains records, approves time, completes SAP transactions, orders production supplies, controls production costs, • Supervise the day-to-day production activity of direct reports and plans production activities to meet schedule deadlines, • Perform hands-on work as required with direct reports to accomplish the necessary work objectives, • Trains direct and develop reports in all aspect of the job, • High school diploma or general education degree (GED)is required, • Associates degree (A.A.), or equivalent from two-year college or technical school is preferred, • 3-5 years fabrication experience is required, • Inventory control experience is preferred, • MRP experience is preferred, • SAP experience is preferred About Calgon Carbon At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we’ve been at the forefront of developing cutting-edge technologies and solutions to meet the world’s evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran PId16a64c3bd9b-25405-39539976

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Morris Great Lakes a division of the Morris Group, Inc, supplies CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts. Our customer base is located in western New York, western Pennsylvania and West Virginia. Our mission is to help manufacturers from all industry sectors achieve and maintain a competitive advantage by improving productivity. Summary of Responsibility: The Field Service Technician will have an understanding of electrical, pneumatic, and hydraulic schematics to effectively detect and resolve issues with electrical and mechanical components. Duties include, but are not limited to: * Daily travel from home to customer facilities with overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. * Install, commission, calibrate, maintain, address, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. * Demonstrate a willingness to help others and be a productive team member. * Ensure accurate documentation is completed and connect with office management daily. Efficiently update the status of machine issues, repairs, and installations using the Salesforce Lightning Customer Support computer system. * Maintain an in-depth knowledge of machine tool industry and product lines represented by the company. * Promote and perform preventative maintenance and successfully diagnose and resolve CNC equipment issues to the customer’s satisfaction. Qualifications & Competencies * Minimum of one year of experience with a machine tool builder or distributor, a factory maintenance technician would also be considered. * Proficient verbal and written communication and Customer relation skills. * Able to interact and optimally communicate in person and over the phone with customer and co-workers. * Present a professional image. * Must be adaptable to changes and flexible when dealing with delays, or general work-related issues * Basic digital literacy and understanding of MS Word, Excel, and Outlook. * Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). * Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background, is a plus. * Basic mechanical and logical solving skills and ability to read and interpret drawings and schematics are required. * Rational decision making and problem-solving skills. * Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. Other Functions: * Perform related duties as required The duties listed above are intended only as an illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. What's in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: * Competitive starting salary * Paid Time Off, starting with 23 paid days off in your first year. * 10 Company Paid Holidays * Comprehensive Health Benefits including, Medical, Vision, Dental and Life Insurance * 401(k) retirement plan with company contribution * Tuition reimbursement * Employee appreciation events and perks * Employee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Must be highly mobile, able to access all areas of the premises. * Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. * Ability to sit for prolonged period of times. * Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. * Ability to frequently use hands and arms. * Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. * Ability to keep their composure with the public and co-workers in everyday, stressful situations. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1486B- Pittsburgh, PA

We are seeking an experienced and innovative physician educator for our next Residency Program Director at Allegheny General Hospital (AGH) within the Allegheny Health Network (AHN). The AGH residency program has been training EM residents for more than 40 years and has graduated physicians who have become leaders in academic medicine and health systems. AGH is a Level 1 Trauma Center and the basis for the Emmy Award winning TV show "The Pitt." The program has 36 residents who complete rotations at multiple sites within AHN's ten hospitals. The AGH residents also do innovative training at AHN's nationally acclaimed STAR Simulation Center. We are searching for an academic physician with a proven track record in residency leadership and a vision to advance a historic training program during a time of transition in Emergency Medicine residency training. Candidates must be Board Certified in Emergency Medicine and have experience as a Program Director, Associate or Assistant Program Director. The Program Director leadership role has a competitive salary, 401K 10% company contribution (no matching required), excellent benefits, and professional development funds. The academic appointment will be at Drexel University College of Medicine. About Allegheny General Hospital • Trauma Designation: Level I, • ED Volume: 43,000, • ED Beds: 32, • ED Admission Rate: 39% with high-acuity, • EMR: Epic, • New state of the art ED construction to begin in 2025, • Cardiac/STEMI center designation, • Active in EMS providing a medical command to 16 ambulance services and supporting Lifeflight, • Accredited and highly regarded Emergency Medicine Residency Program, • ECMO Center, • Allegheny General Hospital has earned an international reputation for excellence and innovation in education, research and above all, the care of patients. The physicians are world-renowned in their fields and lead exceptional teams of nurses, technicians, and support staff who deliver advanced, compassionate care with the personal attention every patient deserves. Financial Benefits: • $4,000 tax-free CME/BEA annually, • $6,500 plus your state and DEA license in year one for new graduates, • Groundbreaking 100% Paid Parental Leave, • Pioneering Paid Military Leave, • Student loan refinancing as low as 2.99%, • Comprehensive medical, dental, vision and Rx coverage, • Short- and long-term disability (own occupation), • Unmatched medical malpractice including tail and free litigation support, • Location flexibility and career stability of a national group, • National Clinical Governance Board (NCGB) of internally elected physicians, • Clinical Management Tools (CMTs) provide evidence-based support, • 24/7/365 live physician support, • Professional Development Programs including Scholars (Leadership Training), Efficiency Academy, Engagement & Experience Academy, • USACS Annual Assembly opportunity Pittsburgh has been designated many times as one of the country's most livable cities. Originally a major industrial center, Pittsburgh has made the successful transition to an economy that is largely based on healthcare, education, technology, and financial services. Pittsburgh hosts world-class education including universities like Pitt and Carnegie Mellon, plus nationally regarding public and private schools. The residential options are vast and offer easy commuting from urban, suburban and rural amenities. The city and the region feature dozens of parks and other outdoor recreational attractions including the riverfront and mountains. Pittsburghers are dedicated to their sports teams, including its major-league clubs - the Steelers, Penguins and Pirates. A beautiful downtown Cultural District is home to the Pittsburgh Symphony Orchestra, Pittsburgh Ballet Theater, and Civic Light Opera and numerous theaters and galleries.

The Emergency Medical Services Fellowship at Allegheny General Hospital (Pittsburgh, PA) is seeking a qualified Assistant Program Director. The fellowship is a one-year program for didactic and clinical immersion in EMS medicine. ACGME accredited since 2017, this program is based at a Level I Trauma, Stroke, ECPR, and STEMI Center. Qualifications • MD/DO or equivalent, • Must have current board certification in Emergency Medical Services by the American Board of Emergency Medicine or AOBEM, • Serve as Assistant Program Director to assist in the clinical and didactic education, operation, and administrative oversight of the EMS fellow and fellowship program, • Trauma Designation: Level I, • ED Volume: 42,000, • ED Beds: 32, • ED Admission Rate: 39% with high-acuity, • EMR: Epic with Abridge AI for ambient generative AI documentation, • New state of the art ED construction to begin in 2025, • Cardiac/STEMI center designation, • Active in EMS providing a medical command to 16 ambulance services and supporting Lifeflight, • Accredited and highly regarded Emergency Medicine Residency Program, • ECMO Center, • Allegheny General Hospital has earned an international reputation for excellence and innovation in education, research and above all, the care of patients. The physicians are world-renowned in their fields and lead exceptional teams of nurses, technicians, and support staff who deliver advanced, compassionate care with the personal attention every patient deserves. Financial Benefits: • $100,000 equity ownership given to all full-time Physicians after 3 years of employment, • Industry-leading 10% company-funded 401(k) up to IRS limit of $35,000, • $4,000 tax-free CME/BEA annually, • $6,500 plus your state and DEA license in year one for new graduates, • Groundbreaking 100% Paid Parental Leave, • Pioneering Paid Military Leave, • Student loan refinancing as low as 2.99%, • Comprehensive medical, dental, vision and Rx coverage, • Short- and long-term disability (own occupation), • Unmatched medical malpractice including tail and free litigation support, • Location flexibility and career stability of a national group, • National Clinical Governance Board (NCGB) of internally elected Physicians, • Clinical Management Tools (CMTs) provide evidence-based support, • 24/7/365 live Physician support, • Professional Development Programs including:, • Scholars (Leadership Training), • Efficiency Academy, • Engagement & Experience Academy, • USACS Annual Assembly opportunity Pittsburgh has been designated many times as one of the country's most livable cities. Originally a major industrial center, Pittsburgh has made the successful transition to an economy that is largely based on healthcare, education, technology, and financial services. Pittsburgh hosts world-class education including universities like Pitt and Carnegie Mellon, plus nationally regarding public and private schools. The residential options are vast and offer easy commuting from urban, suburban and rural amenities. The city and the region feature dozens of parks and other outdoor recreational attractions including the riverfront and mountains. Pittsburghers are dedicated to their sports teams, including its major-league clubs - the Steelers, Penguins and Pirates. A beautiful downtown Cultural District is home to the Pittsburgh Symphony Orchestra, Pittsburgh Ballet Theater, and Civic Light Opera and numerous theaters and galleries.

Generator Technician (x 10) Full time Introduction Brightsmith is representing a global OEM operating in the energy technology sector, delivering Flow Control and Safety Solutions that support critical power generation and industrial applications worldwide. We are looking for 10 full-time Generator Technicians - roles that are central to the assembly, testing, servicing, and quality assurance of generator systems and associated components. These positions offer hands on technical work combined with structured training and international exposure, making it an excellent opportunity for technicians looking to deepen their expertise within a global organization. What Makes This Role Stand Out • Join a global OEM with a strong reputation in power generation technology, • Extensive technical training delivered by experienced specialists, • Exposure to complex generator systems, including rotors and stators, • Opportunity to work with international teams and global channel partners, • Clear emphasis on safety, quality, and continuous improvement, • Competitive compensation and comprehensive benefits Key Responsibilities • Assemble and service rotor components, including excitation leads, windings, wedging, pressing, hoop installation, and rotor repairs, • Complete stator activities such as phase marking, coil insertion, wedging, soldering, insulation, electrical installation, and assembly of outlet cables, • Produce and assemble electrical and mechanical connections, including Teflon hoses, RTD elements, and exciter windings, • Support packaging and shipping of finished goods in line with specified requirements, • Sort, mark, and label products according to production standards, • Fold, store, and manage packaging materials including boxes, crates, pallets, and protective materials, • Operate and perform basic maintenance on packaging machines and lines, • Conduct required audits and provide product and quality system support to global channel partners Who We’re Looking For • Ability to read and interpret mechanical drawings, • Strong attention to detail with a consistent focus on quality, • Valid passport and willingness to travel internationally, • Clear communication skills and an inclusive, collaborative working style, • High school diploma, GED, or vocational qualification in a mechanical or electrical discipline, • Experience in mechanical assembly with basic electrical training or exposure, • Knowledge of power generation or rotating equipment is beneficial but not essential Location and Package • Location: Turtle Creek, Pennsylvania, USA, • Working pattern: Two shift schedule, including rotational night shifts, • Training: Six weeks of comprehensive training in the Czech Republic, with travel for approximately two weeks per month over a three month period, • Salary: $65,000 to $85,000 base salary, depending on experience, • Benefits include private medical care options, life insurance, disability programs, education assistance, parental leave, mental health resources, dependent care, and access to a company sponsored 401k plan How to Apply If you are looking for a technically challenging role with global exposure and long term development potential, we would be pleased to hear from you. Apply via Brightsmith to learn more about this opportunity and the organization behind it.

Job Description Calgon Carbon | A Kuraray Company is growing - and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Position: Welder I Location: Equipment & Assembly Plant – Pittsburgh, PA Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) – Generous Company Match! Perks: Incentives/bonus plans, competitive pay, dress for your day, hybrid schedules, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hours of work: Mondays - Fridays, 9:00 AM - 5:00 PM, 40 Hrs/Wk - 3 shift operation An entry level position under the supervision of the E&A supervisor or group leader, the Welder I will perform all functions under this job description. This includes all necessary functions to maintain a clean and safe shop. The Welder I will comply with all Company and Safety Policies and procedures in the performance of assigned duties. The Welder I performs tack welding and finish welding of piping systems utilizing both SMAW, FCAW, and GMAW welding procedures. Certification to CCC procedures is required. The Welder I welds vessels and structural components utilizing SMAW, FCAW, and GMAW welding processes. Performs these procedures to meet CCC certified procedures. The Welder I inspects own work to ensure compliance to drawings and weld procedures and makes necessary repairs. The Welder I will operate Fork trucks, jib cranes and overhead crane after training. The Welder I assist in other areas of the plan as assigned. Duties and Responsibilities (not limited to) • Complying with company policy, • Material handling/movement, • Welding Qualifications • High school diploma or general education degree (GED) is required, • Associates degree (A.A.), or equivalent from two-year college or technical school is preferred, • 2-3 years welding experience is required At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we’ve been at the forefront of developing cutting-edge technologies and solutions to meet the world’s evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran PI0d42dc9ba3f2-25405-37640544

Job Description Calgon Carbon | A Kuraray Company is growing - and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Position: ASME Welder Location: Equipment and Assembly Facility - Pittsburgh, PA $29.79 to start with a wage step progression plan Eligibility to receive a $1,000 new hire retention bonus ($500 payment at hire and an additional $500 payment after successfully completing 6-months of employment) Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) – Generous Company Match! Perks: Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hour of work: Schedule flexibility to work in rotating shifts - Must be able to work a 3 shift rotation Under the supervision of the E&A supervisor or group leader, the technician will perform all functions under this job description. This includes all necessary functions to maintain a clean and safe shop. Complies with all Company and Safety Policies and procedures in the performance of assigned duties. Welds all vessels (including large ASME) and structural components utilizing SMAW, FCAW, SAW, GTAW and GMAW welding processes. Performs these procedures to meet CCC certified procedures. (These may include ASME, API, AWS, and ANSI code certification.) Materials may include carbon steel, stainless steel and various other nickel-based alloys. Duties and Responsibilities (not limited to) • Able to pass non-destructive testing of pressure retaining welds, on both pipe and vessels, • Works from drawings/sketches to determine weld size, weld location and weld process, • Inspects own work to ensure compliance to drawings and weld procedures and makes necessary repairs, • Assist with incoming parts inspection and final product inspection and complete appropriate documentation, • Operate Fork trucks, jib cranes and overhead crane, • Complete ASME code weld log documentation daily, • Comply with company policies, • Material handling/movement, • Welding, • A High School diploma or Trade School certification is required, • Capability to obtain ASME section 9 in GTAW, GMAW, and FCAW certification while Employed, • 2 years of experience welding on pressure vessels and FCAW welding process is required, • CCC procedures certification About Calgon Carbon At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we’ve been at the forefront of developing cutting-edge technologies and solutions to meet the world’s evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran Compensation details: 28.78-28.78 Hourly Wage PI95c113ab5831-25405-37735022

Branch Medical Group, a subsidiary of Globus Medical Inc. The Assembly Technician is responsible for assembling medical devices in compliance with applicable FDA, state, OSHA, and ISO regulations and standards. Globus Medical is an equal opportunity employer.

Branch Medical Group, a subsidiary of Globus Medical Inc. The Assembly Technician is responsible for assembling medical devices in compliance with applicable FDA, state, OSHA, and ISO regulations and standards. Generates assembly records for system Device History Records (DHR).