No diploma jobs in Buffalo, New YorkCreate job alerts

Description: Located in Hershey, PA, Milton Hershey School (MHS) is a top-notch home and school where over 2,200 pre-K through 12th grade students from disadvantaged backgrounds are provided an extraordinary, cost-free, career-focused education. This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed. Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students. MHS is hiring married couples to serve as Full-time Flex Houseparents. In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home. Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential. Responsibilities include: • Providing daily supervision and mentorship, • Managing household routines and student schedules, • Administering medications and ensuring student wellness, • Driving students to activities, as well as planning and actively engaging in developmental and recreational activities with students, • Leading daily devotions and accompanying students to Sunday Chapel Benefits include: • Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more), • Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings, • Relocation assistance and paid training provided, • Paid time off provided at designated times throughout the year Qualifications: Qualifications include: • Experience working or volunteering with youth, • This is a two-person role for couples legally married for at least two years, • Both spouses must be age 27 or older, • No more than three dependent children may reside in the student home, • Commitment to a smoke-free and weapon-free campus; no alcohol permitted while on duty, • Pet limitations: only fish and one dog of approved breeds allowed, • Valid U.S. driver’s license and ability to become certified to drive student home vans, • Comfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited), • High school diploma or GED required, • Ability to lift to 50 lbs., • Demonstrated integrity and professionalism; MHS staff serve as role models for students This is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses. For consideration, both spouses must complete individual employment applications. To learn more and apply, visit ___.

Description: Located in Hershey, PA, Milton Hershey School (MHS) is a top-notch home and school where over 2,200 pre-K through 12th grade students from disadvantaged backgrounds are provided an extraordinary, cost-free, career-focused education. This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed. Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students. MHS is hiring married couples to serve as Full-time Flex Houseparents. In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home. Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential. Responsibilities include: • Providing daily supervision and mentorship, • Managing household routines and student schedules, • Administering medications and ensuring student wellness, • Driving students to activities, as well as planning and actively engaging in developmental and recreational activities with students, • Leading daily devotions and accompanying students to Sunday Chapel Benefits include: • Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more), • Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings, • Relocation assistance and paid training provided, • Paid time off provided at designated times throughout the year Qualifications: Qualifications include: • Experience working or volunteering with youth, • This is a two-person role for couples legally married for at least two years, • Both spouses must be age 27 or older, • No more than three dependent children may reside in the student home, • Commitment to a smoke-free and weapon-free campus; no alcohol permitted while on duty, • Pet limitations: only fish and one dog of approved breeds allowed, • Valid U.S. driver’s license and ability to become certified to drive student home vans, • Comfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited), • High school diploma or GED required, • Ability to lift to 50 lbs., • Demonstrated integrity and professionalism; MHS staff serve as role models for students This is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses. For consideration, both spouses must complete individual employment applications. To learn more and apply, visit ___.

Description: Located in Hershey, PA, Milton Hershey School (MHS) is a top-notch home and school where over 2,200 pre-K through 12th grade students from disadvantaged backgrounds are provided an extraordinary, cost-free, career-focused education. This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed. Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students. MHS is hiring married couples to serve as Full-time Flex Houseparents. In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home. Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential. Responsibilities include: • Providing daily supervision and mentorship, • Managing household routines and student schedules, • Administering medications and ensuring student wellness, • Driving students to activities, as well as planning and actively engaging in developmental and recreational activities with students, • Leading daily devotions and accompanying students to Sunday Chapel Benefits include: • Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more), • Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings, • Relocation assistance and paid training provided, • Paid time off provided at designated times throughout the year Qualifications: Qualifications include: • Experience working or volunteering with youth, • This is a two-person role for couples legally married for at least two years, • Both spouses must be age 27 or older, • No more than three dependent children may reside in the student home, • Commitment to a smoke-free and weapon-free campus; no alcohol permitted while on duty, • Pet limitations: only fish and one dog of approved breeds allowed, • Valid U.S. driver’s license and ability to become certified to drive student home vans, • Comfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited), • High school diploma or GED required, • Ability to lift to 50 lbs., • Demonstrated integrity and professionalism; MHS staff serve as role models for students This is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses. For consideration, both spouses must complete individual employment applications. To learn more and apply, visit ___.

Description: Located in Hershey, PA, Milton Hershey School (MHS) is a top-notch home and school where over 2,200 pre-K through 12th grade students from disadvantaged backgrounds are provided an extraordinary, cost-free, career-focused education. This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed. Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students. MHS is hiring married couples to serve as Full-time Flex Houseparents. In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home. Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential. Responsibilities include: • Providing daily supervision and mentorship, • Managing household routines and student schedules, • Administering medications and ensuring student wellness, • Driving students to activities, as well as planning and actively engaging in developmental and recreational activities with students, • Leading daily devotions and accompanying students to Sunday Chapel Benefits include: • Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more), • Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings, • Relocation assistance and paid training provided, • Paid time off provided at designated times throughout the year Qualifications: Qualifications include: • Experience working or volunteering with youth, • This is a two-person role for couples legally married for at least two years, • Both spouses must be age 27 or older, • No more than three dependent children may reside in the student home, • Commitment to a smoke-free and weapon-free campus; no alcohol permitted while on duty, • Pet limitations: only fish and one dog of approved breeds allowed, • Valid U.S. driver’s license and ability to become certified to drive student home vans, • Comfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited), • High school diploma or GED required, • Ability to lift to 50 lbs., • Demonstrated integrity and professionalism; MHS staff serve as role models for students This is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses. For consideration, both spouses must complete individual employment applications. To learn more and apply, visit ___.

Description: Located in Hershey, PA, Milton Hershey School (MHS) is a top-notch home and school where over 2,200 pre-K through 12th grade students from disadvantaged backgrounds are provided an extraordinary, cost-free, career-focused education. This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed. Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students. MHS is hiring married couples to serve as Full-time Flex Houseparents. In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home. Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential. Responsibilities include: • Providing daily supervision and mentorship, • Managing household routines and student schedules, • Administering medications and ensuring student wellness, • Driving students to activities, as well as planning and actively engaging in developmental and recreational activities with students, • Leading daily devotions and accompanying students to Sunday Chapel Benefits include: • Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more), • Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings, • Relocation assistance and paid training provided, • Paid time off provided at designated times throughout the year Qualifications: Qualifications include: • Experience working or volunteering with youth, • This is a two-person role for couples legally married for at least two years, • Both spouses must be age 27 or older, • No more than three dependent children may reside in the student home, • Commitment to a smoke-free and weapon-free campus; no alcohol permitted while on duty, • Pet limitations: only fish and one dog of approved breeds allowed, • Valid U.S. driver’s license and ability to become certified to drive student home vans, • Comfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited), • High school diploma or GED required, • Ability to lift to 50 lbs., • Demonstrated integrity and professionalism; MHS staff serve as role models for students This is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses. For consideration, both spouses must complete individual employment applications. To learn more and apply, visit ___.

Student success coach and mentor (entry level, paid, full-time) City Year AmeriCorps Member About City Year City Year, an AmeriCorps program, helps students across schools succeed. Teams of City Year AmeriCorps members provide support to students, classrooms and the whole school, helping to ensure that students in schools receive a high-quality education that prepares them with the skills and mindset to thrive and contribute to their community. What You’ll Do As a City Year AmeriCorps member, your service will focus on coaching and mentoring elementary, middle and/or high school students. You will help these students earn academic success, improve their attendance, and develop positive behaviors at school. You will plan and monitor individual student progress and work with teachers on whole class instruction, breakout spaces and other in-class student assistance. Role and Responsibilities Experience in all these tasks is not necessary. We provide 2-4 weeks of training at the beginning of the year to support you. Plus, you will work with partner teachers and school staff every step of the way. Support academic coaching and interpersonal development for students: · Work with identified students 1:1 and in small groups · Develop literacy and/or math skills varying learning activities by student level, answering student questions and encouraging assignment completion · Create and implement a behavior management system for students · Develop interpersonal skills throughout their day, using proven strategies of learning, practicing, reflection and repetition · Collaborate with teachers and team members to collect, record, analyze and monitor individual student progress, participating in facilitated reviews of student data collected and entered into City Year’s student data system· Create an engaging, safe and healthy classroom space in collaboration with the teacher Support Whole School initiatives to increase engagement with students and families: · Support and/or conduct extended day and virtual programming for students before, during and after school including, but not limited to, academic enrichment and intervention, homework support, recreation and student clubs, service learning, and leadership development · Create, support and/or co-lead events or programs that recognize and appreciate student growth and/or achievement in math, literacy, attendance, and behavior City Year benefits You will receive: · Health, Dental, and Vision Insurance · Curalinc Employee Assistance Program · Talkspace Therapy Program · Free 3-year membership to Happier · Benefit Advocate Center · Bi-weekly living stipend · Workers’ compensation · Relocation support · Benefits specific to City Year location · Career and University partnerships and scholarships · City Year / AmeriCorps Uniform parts AmeriCorps and other federally-issued benefits You will be eligible for: · Segal AmeriCorps Education Award* · Child care benefits paid by AmeriCorps · Loan forbearance and interest accrual payments for qualified student loans · Time accrual toward the U.S. Department of Education’s Public Service Loan Forgiveness Program, (see Reduction of Education Costs) · Income-based Loan Repayment Plan (IBR)Eligibility Requirements City Year AmeriCorps members are as varied as the communities we serve. We’re looking for you if you want to build yourself, give back and are ready to change the world. · Be a U.S. citizen or legal permanent resident (Authorization to work in the U.S. is not sufficient. Those with DACA status unfortunately are not eligible at this time) · Be 17-25 by July 1, 2025 · Have a GED or high school diploma, some college experience, or college degree · Have served no more than three terms in an AmeriCorps state or national program* · Agree to and complete a background check · Be able to begin City Year by July/August 2025 (specific start date varies by location) How to Apply Visit ___ and submit your completed application online. For more information on how to apply, visit: ___. For more information about this role visit our ___

Student success coach and mentor (entry level, paid, full-time) City Year AmeriCorps Member About City Year City Year, an AmeriCorps program, helps students across schools succeed. Teams of City Year AmeriCorps members provide support to students, classrooms and the whole school, helping to ensure that students in schools receive a high-quality education that prepares them with the skills and mindset to thrive and contribute to their community. What You’ll Do As a City Year AmeriCorps member, your service will focus on coaching and mentoring elementary, middle and/or high school students. You will help these students earn academic success, improve their attendance, and develop positive behaviors at school. You will plan and monitor individual student progress and work with teachers on whole class instruction, breakout spaces and other in-class student assistance. Role and Responsibilities Experience in all these tasks is not necessary. We provide 2-4 weeks of training at the beginning of the year to support you. Plus, you will work with partner teachers and school staff every step of the way. Support academic coaching and interpersonal development for students: · Work with identified students 1:1 and in small groups · Develop literacy and/or math skills varying learning activities by student level, answering student questions and encouraging assignment completion · Create and implement a behavior management system for students · Develop interpersonal skills throughout their day, using proven strategies of learning, practicing, reflection and repetition · Collaborate with teachers and team members to collect, record, analyze and monitor individual student progress, participating in facilitated reviews of student data collected and entered into City Year’s student data system· Create an engaging, safe and healthy classroom space in collaboration with the teacher Support Whole School initiatives to increase engagement with students and families: · Support and/or conduct extended day and virtual programming for students before, during and after school including, but not limited to, academic enrichment and intervention, homework support, recreation and student clubs, service learning, and leadership development · Create, support and/or co-lead events or programs that recognize and appreciate student growth and/or achievement in math, literacy, attendance, and behavior City Year benefits You will receive: · Health, Dental, and Vision Insurance · Curalinc Employee Assistance Program · Talkspace Therapy Program · Free 3-year membership to Happier · Benefit Advocate Center · Bi-weekly living stipend · Workers’ compensation · Relocation support · Benefits specific to City Year location · Career and University partnerships and scholarships · City Year / AmeriCorps Uniform parts AmeriCorps and other federally-issued benefits You will be eligible for: · Segal AmeriCorps Education Award* · Child care benefits paid by AmeriCorps · Loan forbearance and interest accrual payments for qualified student loans · Time accrual toward the U.S. Department of Education’s Public Service Loan Forgiveness Program, (see Reduction of Education Costs) · Income-based Loan Repayment Plan (IBR)Eligibility Requirements City Year AmeriCorps members are as varied as the communities we serve. We’re looking for you if you want to build yourself, give back and are ready to change the world. · Be a U.S. citizen or legal permanent resident (Authorization to work in the U.S. is not sufficient. Those with DACA status unfortunately are not eligible at this time) · Be 17-25 by July 1, 2025 · Have a GED or high school diploma, some college experience, or college degree · Have served no more than three terms in an AmeriCorps state or national program* · Agree to and complete a background check · Be able to begin City Year by July/August 2025 (specific start date varies by location) How to Apply Visit ___ and submit your completed application online. For more information on how to apply, visit: ___. For more information about this role visit our ___

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Mill Machinist I - 1st Shift Reporting To: Management, General Manufacturing & Operations Work Schedule: Onsite - Buffalo, NY Moog is the world-wide leader of advanced flight controls and actuation for commercial and military aircraft. We are positioned on virtually every aircraft flying today, supplying highly reliable systems that are supportable and add significant value for our customers. To be considered for this role, here's what you'll need to bring with you: \n • High School diploma or GED preferred. Otherwise, demonstrated ability to understand and apply all verbal, written and computer work instructions or training in English, and demonstrated ability to perform simple addition, subtraction, multiplication, and division.\n, • 6 months to 1 year of relevant Mill Machinist Experience is a manufacturing setting.\n, • In accordance with strict Federal Aviation Administration (F.A.A.) regulations regarding Safety Sensitive Work (S.S.W.), employee enrollment & participation in the company's "F.A.A. Drug & Alcohol Program" is a requirement for this position.\n\n As a Mill Machinist I, you will: \n • Demonstrate a knowledge of a vertical mills, and tracer-type milling machines.\n, • Demonstrate the ability to run a vertical mill.\n, • Interpret drawings, occasionally work without operation sheets, and make difficult layouts.\n, • Inspect all work performed and detect unusual conditions, defective materials, and defective parts using different inspection equipment and processes.\n\n How we care for you: • Financial Rewards: great compensation package, annual profit sharing, matching 401k and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts \n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance \n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages \n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs \n\n, • Collaborative and Welcoming Workplace: Inclusive culture rooted in our values, enhanced by Employee Resource Groups, and team-building activities.\n, • Additional site-specific benefits may be offered\n\n, • 2nd and 3rd shift employees receive 10% shift differential pay. \n Salary Range Transparency: Buffalo, NY $22.00-$26.00 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Mill Machinist III - 3rd Shift Reporting To: Management, General Manufacturing & Operations Work Schedule: Onsite - Buffalo, NY Moog is the world-wide leader of advanced flight controls and actuation for commercial and military aircraft. We are positioned on virtually every aircraft flying today, supplying highly reliable systems that are supportable and add significant value for our customers. To be considered for this role, here's what you'll need to bring with you: \n • High School diploma or GED preferred. Otherwise, demonstrated ability to understand and apply all verbal, written and computer work instructions or training in English, and demonstrated ability to perform simple addition, subtraction, multiplication, and division.\n, • At least 4 years of relevant experience as a Mill Machinist in a manufacturing setting.\n, • In accordance with strict Federal Aviation Administration (F.A.A.) regulations regarding Safety Sensitive Work (S.S.W.), employee enrollment & participation in the company's "F.A.A. Drug & Alcohol Program" is a requirement for this position.\n\n As a Mill Machinist III, you will: \n • Perform a complete range of milling operations on all types of material using vertical mills, and tracer-type milling machines.\n, • Set up and operate a vertical mill.\n, • Make all set-ups using specified equipment.\n, • Occasionally develop new methods and machining techniques.\n, • Interpret drawings, occasionally work without operation sheets, and make difficult layouts.\n, • Need to work, at times, with minimum guidance.\n, • Inspect all work performed and detect unusual conditions, defective materials, and defective parts using different inspection equipment and processes.\n\n How we care for you: • Financial Rewards: great compensation package, annual profit sharing, matching 401k and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts \n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance \n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages \n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs \n\n, • Collaborative and Welcoming Workplace: Inclusive culture rooted in our values, enhanced by Employee Resource Groups, and team-building activities.\n, • Additional site-specific benefits may be offered\n\n, • 2nd and 3rd shift employees receive 10% shift differential pay. \n Salary Range Transparency: Buffalo, NY $30.00-$36.00 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

$23.00/Hour, Benefits on Day 1! Monday-Friday 1st Shift, No nights/No weekends ESSENTIAL DUTIES AND RESPONSIBILITIES * Trim and customize portions of meat products using knives, band saws or other meat production equipment. * Count and stack on tray portions per customer and company specifications. * Label portion with supplied product labels. * Read and understand cut tickets. * Set up the cutting room as required. * Keep cutting rooms and surrounding area clean and sanitized. * Follow company GMP (Good Manufacturing Practices) to maintain sanitary conditions. * Work continually in a refrigerated environment 35°F- 45°F. * Complete miscellaneous other duties as assigned. * Finish time is when work is completed and could require overtime without notice. RELATIONSHIPS * Internal: The incumbent is required to interact with employees, sales, and management at levels of responsibility throughout the company in a professional manner. * External: N/A WORK ENVIRONMENT * Onsite: Must be able to work continually in a refrigerated environment 35°F- 45°F. MINIMUM QUALIFICATIONS * Skilled as a specialty meat cutter using knives required. * Minimum (1) year experience as a meat cutter. * Ability to work in a fast-paced production environment. * Ability to read and understand customers’ specifications and do basic math functions. EDUCATION * High school diploma or GED equivalent preferred. CERTIFICATIONS/TRAINING * Knowledge of poultry, beef, lamb, and pork products including USDA grades and standards. PREFERRED QUALIFICATIONS * Experience with band saws, laser portion machinery or other meat production equipment is preferred. * Knowledge of NAMA guidelines and product cut numbers preferred. PHYSICAL QUALIFICATIONS * Must be able to perform the following physical activities for the described length of time. OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: OCCASIONALLY DRIVE VEHICLE: N/A SIT: OCCASIONALLY LIFT 1-10 lbs (Sedentary): OCCASIONALLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): N/A CARRY 1-10 lbs (Sedentary): OCCASIONALLY 11-20 lbs (Light): OCCASIONALLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): N/A PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: OCCASIONALLY TWIST: FREQUENTLY GRASP OBJECTS 3: CONTINUOUSLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $22.00-$23.00/hour. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off , short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: ___

Job Description No certification required! Just 6+ months of paid or volunteer experience working with children (babysitting, tutoring, camp counseling, church/youth groups, etc.). Start a fulfilling journey at Autism Learning Partners, supporting children and teens with autism. Build your career while making a positive impact every day! Schedule & Pay * Hours: All weekdays Monday - Friday from 8am to 6pm OR All weekdays Monday - Friday from 3:30pm to 8pm * Work Setting — you’ll primarily provide services in client’s homes, with some sessions held in our local centers depending on your client’s needs * Daily pay access available so you can get paid as you earn You'll be driving to and from clients' homes, so you have a reliable form of transportation, including a valid driver’s license and car insurance Qualifications • You have a High School Diploma or GED completed., • At least 6 months of paid or volunteer experience working with children, preferably in educational or therapeutic settings (ABA experience is a plus), • Traveling Required: You'll be driving to and from clients' homes, so you have a reliable form of transportation including a valid driver’s license and car insurance., • You have a smartphone or similar device (e.g., iPad, tablet with internet services or laptop) capable of capturing client session data and are tech-savvy., • Exposure to individuals with Autism or special needs through family, friends, or work experience is a plus!, • You can pass a criminal background check, motor vehicle record check, TB test, Pre-employment Physical Exam, and have or receive immunities to MMR/ VZV during our onboarding, which we will pay for., • You'll be driving to and from clients' homes, so you have a reliable form of transportation including a valid driver’s license and car insurance., • Ability to read, write, and speak English Proficiently, • Ability to keep up with active children and are enthusiastic and professional. What You’ll Do * Help Kids Learn Through Play: Teach children new skills like communication, sharing, or following directions — often through fun games or activities. * Be a Positive Role Model: Encourage progress and celebrate small victories every day. * Stay Active: You’ll be moving around, playing, and engaging throughout your sessions. * Keep Things Organized: Track what you worked on and how your kiddo did (we’ll train you on this too). * Support Families: Be part of a team that helps families see real progress and hope. Why You’ll Love Working Here * Full, paid training (no experience needed!) * Growth opportunities — many of our leaders started in this role * Additional $2/hr evenings/weekends * Referral Program: $1,000 referral bonus * Benefits: Health, dental, vision (based on hours), mileage reimbursement, paid drive time * Perks: Cell phone stipend, education assistance, and employee discounts Ready to Get Started? If you’re caring, dependable, and want a rewarding part-time job that matters, we’ll train you to become a certified Behavior Technician and help children reach their full potential. Apply today and start turning your love for kids into a meaningful career! Autism Learning Partners is an Equal Opportunity Employer. We are proud to support a diverse workforce and encourage applicants from all backgrounds. BUFBT123P You would be a great fit for this role if you previously worked in one of the following roles: Baby Sitter Tutor Childcare Nanny Caregiver Paraprofessional Special Education Aide Preschool Teacher Assistant Direct Support Professional (DSP) Youth Mentor After-School Program Assistant

Job Title: Ultrasound Technologist Location: Monroe NY Duration: 1.5 months with possible contract extensions Shift: 9 am – 5pm (Monday to Friday) Hours per Week: 40 hours per week Description: What are the top responsibilities for this position? (Please be as detailed as possible as to what tasks will be conducted on a daily basis): Scanning OB Ultrasounds in an MFM/High-Risk OB Department Must have qualifications/experience: Must have experience scanning OB Ultrasound (1st, 2nd & 3rd trimester) What skills/attributes are nice to have, and will set a candidate apart? Experience working in an MFM/High Risk Ultrasound setting Type of certification required: Certificate/Diploma from General Ultrasound Program. ARDMS in OB/GYN preferred Dress code/scrub color: Scrubs- any color where work will take place: Monroe, NY & Middletown, NY Is travel required for this role? If yes, when, and how often? No Will they travel to more than one location within a work shift? No Will work take place in a patient's home? No What type of interview process is preferred? Conversation with Manager of Department, Scanning with the MFM Doctor

Overview: WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: $35-$42/hr, • Sign on Bonus: Up to $3,000.00 DOE, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: · Ability to report to work in a timely manner as scheduled by supervisor. · Repair and overhaul equipment such as compressors, water pumps, air handlers, electrical and mechanical control devices and other similar machinery. · Test malfunctioning systems and components using electrical and/or mechanical skills. · Maintain legible corporate and personal records of work history. · Provide general repair work on refrigeration, heating and ventilation equipment such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors and electric motors. · Provide preventative maintenance activities; diagnose equipment malfunctions and operating efficiency of mechanical equipment. · Perform work on minor construction and remodeling projects including startups of new installations. · Embodies the CoolSys CARES culture (Collaboration, Accountability, Respect, Empowerment, Safety). · Performs other duties as assigned. Qualifications: Education / Training · High school diploma or GED, equivalent work experience and trade or technical school classes. · Valid EPA certificate. Work Experience / Skills · 3-5 year's experience in commercial HVAC, refrigeration, and electrical required. · Basic knowledge of refrigeration, HVAC, ice machines, gas furnaces, and electrical. · Experience working on refrigeration equipment in convenience stores or supermarkets a strong plus. · Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. · Knowlege of the components in a single-phase compressor and single-phase motor control circuit. · Ability to use an ohmmeter. · Ability to verify a capacitor is in good standing. · Ability to demonstrate an understanding of defrost circuits. · Knowledge of schematic and wiring diagram. · Ability to identify/explain function of refrigeration components. · Ability to properly leak check a single-compressor system. · Ability to demonstrate proper PPE and safety equipment. · Ability to set up LPC as the primary temperature control and as a pump down safety control. · Ability to demonstrate how to determine superheat and how to set expansion valve superheat. · Ability to verify a defrost termination is functional. · Ability to demonstrate the proper tasks for performing preventative maintenance on HVAC systems. · Ability and knowledge of the functions and safety precautions of the components of a gas furnace system. · Ability to properly recover refrigerant from a refrigeration system. · Ability to change oil in a vacuum pump. · Ability to demonstrate how to properly hook up a gauge set for evacuation. · Knowledge of reporting procedure for a large refrigerant release. · Knowledge of level 2 experience/information. · Must be able to lift up to 60 lbs. with no assistance and be able to sit and/or stand for several hours at a time. · Valid driver’s license. · Good driving record. · Ability to understand and follow all company policies and procedures and all applicable State and Federal laws. · Ability to use typical business tools including E-Mail, Word, Excel, etc. Join Us: Today, there are 27 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on ___ and ___. CoolSys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

This position requires regular, in-person customer visits and daily travel throughout the Greater Buffalo, NY region. Candidates must be able to reliably cover the assigned territory. No recruiters or unsolicited agency referrals, please. Are you looking for a dynamic medical equipment sales position where every day is different and you can make an immediate impact with leading healthcare providers? CME Corp. is seeking a motivated sales professional to join our growing organization. Position Overview As a Medical Equipment Sales Representative, you will manage and grow a defined book of business while developing new sales opportunities within the Greater Buffalo, NY territory. This role focuses on building relationships with large healthcare systems and key decision-makers and reports to the Regional Sales Manager. This position requires regular, in-person customer visits and daily travel throughout the assigned territory, and therefore candidates must be able to reliably cover the Greater Buffalo, NY area. Responsibilities • Manage and expand existing customer relationships while prospecting new business opportunities, • Meet or exceed monthly and annual sales and revenue targets, • Prepare bids, quotes, and customer proposals, • Build and maintain relationships with manufacturer sales representatives, • Identify and engage key decision-makers and buying influencers, • Differentiate CME Corp. through value-based solutions beyond products and services, • Maintain strong product knowledge and serve as a trusted resource to customers, • Stay current on industry trends and market developments Qualifications • Bachelor’s degree, or high school diploma with 5+ years of relevant experience, • Minimum of 2 years of progressive experience in account management, sales, or a related role, • Acute care or healthcare sales experience preferred, • Strong communication, interpersonal, and presentation skills, • Proficiency with Microsoft Office and Salesforce CRM, • Ability to travel daily within the assigned territory as business needs require Who You Are • Self-motivated and goal-oriented, • Highly organized with strong attention to detail, • Customer-centric and solution-focused, • Competitive, resilient, and adaptable in a fast-paced environment, • Strong problem-solving skills Compensation and Benefits: The Company reasonably expects to pay a base draw in the range of $90,000–$150,000 annually. This range reflects the base draw only and does not include commissions or other incentive compensation. The draw is non-recoverable during the initial training period. After training, the draw may be reconciled against future earned commissions in accordance with the Company’s Sales Incentive Plan. This range represents the company’s good-faith estimate of the base draw compensation that may be offered at the time of hire and is based on factors including, but not limited to, job-related knowledge, skills, experience, education, training, licensure or certifications, internal equity, geographic location, and business or organizational needs. This position is commission-based and is eligible to participate in the company’s Sales Incentive Plan, with uncapped commission potential. Commissions are earned based on individual performance and sales results and are paid in accordance with the terms of the applicable incentive plan. Commissions are earned upon satisfaction of the applicable earning criteria as defined in the company’s Sales Incentive Plan and, once earned, will be paid in accordance with applicable state law. Participation in any bonus, commission, incentive, or benefit program—including eligibility, amount, timing, and terms—remains subject to company discretion and may be modified or discontinued prospectively, consistent with applicable law. Additional benefits include: • Company laptop and cell phone, • Monthly expense allowance, • Medical, Dental & Vision, • PTO- Vacation, Sick and 11 Paid Holidays, • Employer-Paid Life Insurance, • 401k Retirement Plan, • Employee Stock Ownership Plan, • Flexible Spending Account, • Voluntary Benefits – Critical Illness, Short & Long Term Disability, Accident, Life, Whole Life, and Pet insurance, • Tuition Reimbursement, • Referral Bonus Program, • Employee Assistance Program About CME: Dedicated to providing quality equipment, logistics, and services to healthcare. CME is the premier source for equipment and turnkey logistics, delivery, and support for the healthcare community. The company helps healthcare facilities nationwide to seamlessly launch, renovate and expand. CME is headquartered in Warwick, RI with branches in Anaheim, CA, and Long Island, NY and over 35+ service centers spanning the nation and offers an expanded product line of more than 2 million+ medical products from more than 2,000 manufacturers. We support our military community, veterans encouraged to apply! CME Corp. is an equal opportunity employer. We welcome applications from all backgrounds regardless of race, color, religion, sex, national origin, ancestry, age, marital status, sexual orientation, gender identity, veteran status, disability, or any other classification protected by law.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Electrician - 2nd Shift Reporting To: Supervisor, Electrical Maint. Work Schedule: Onsite - Buffalo, NY Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. To be considered for this role, here's what you'll need to bring with you: \n • High School diploma or GED preferred. Otherwise, demonstrated ability to understand and apply all verbal, written and computer work instructions or training in English, and demonstrated ability to perform simple addition, subtraction, multiplication and division.\n, • Minimum of 5 years electrician work experience (industrial setting preferred).\n, • Demonstrated proficiency as an Electrician (Electrical primary craft)\n, • Able to demonstrate basic computer skills, math and problem-solving; mechanical, numerical and verbal aptitude to learn our jobs quickly\n, • Must be able to work call-ins and overtime when support is needed\n, • Able to use standard safety equipment; must be able to lift up to 50 pounds\n, • Able to climb ladders/stairs and work at heights using manlifts, scaffolding, and ladders.\n, • Able to work in tight or closed-in spaces\n, • Ability to train on 1st shift for a minimum of 3 months before assignment to 3rd shift.\n\n Moog Electrician Essential Job Functions: Actively participates and contributes to safety adherence and understanding across the organization with regards to sustaining electrical safety best practices. Repair and maintain electrical systems and related components for industrial equipment; Install power supply wiring and diagnose or troubleshoot malfunctions; Repair or replace faulty components, such as relays, switches, motors or fixtures; Electricians prepare reports of maintenance and repair activities, including modifications of schematics or blueprints; Participate in safety meetings and training activities; Follow established safety and operating procedures and practices. Moog electricians work with minimum supervision and daily duties involve reading and interpreting work orders; Technical descriptions; Safety manuals including NEC, NFPA 70e, and ANSI, reading and following electrical code, manuals, schematics, specifications and circuit prints. Electricians consult with operators, engineers, factory and manufacturing representatives or area managers on maintenance problems and projects; Coordinate with operating personnel regarding maintenance and repair activities; Adhering to all necessary safe-work permits; Install, repair and maintain motors, electrical operating equipment, switches, relays and fixtures. Inspect / maintain transformers, buss bars, circuit breakers, and wiring connections in power distribution substations; Troubleshoot electrical equipment, switchgear, controls and wiring using test equipment. Repair motor starters and controls; Test continuity of circuits to ensure electrical compatibility and safety of components using voltmeters, ohmmeters, and meggers. Benefits \n • 401(k) matching\n, • Benefits from day one\n, • Dental insurance\n, • Employee stock purchase plan\n, • Health insurance\n, • Paid time off\n, • Tuition reimbursement\n, • Vision insurance\n, • Onsite Pharmacy\n, • Onsite Vision Store\n, • Onsite Health\n, • 2nd and 3rd shift employees receive 10% shift differential pay. \n\n Salary Range Transparency: Buffalo, NY $36.05-$43.72 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Electrician - 2nd Shift Reporting To: Supervisor, Electrical Maint. Work Schedule: Onsite - Buffalo, NY Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. To be considered for this role, here's what you'll need to bring with you: \n • High School diploma or GED preferred. Otherwise, demonstrated ability to understand and apply all verbal, written and computer work instructions or training in English, and demonstrated ability to perform simple addition, subtraction, multiplication and division.\n, • Minimum of 5 years electrician work experience (industrial setting preferred).\n, • Demonstrated proficiency as an Electrician (Electrical primary craft)\n, • Able to demonstrate basic computer skills, math and problem-solving; mechanical, numerical and verbal aptitude to learn our jobs quickly\n, • Must be able to work call-ins and overtime when support is needed\n, • Able to use standard safety equipment; must be able to lift up to 50 pounds\n, • Able to climb ladders/stairs and work at heights using manlifts, scaffolding, and ladders.\n, • Able to work in tight or closed-in spaces\n, • Ability to train on 1st shift for a minimum of 3 months before assignment to 3rd shift.\n\n Moog Electrician Essential Job Functions: Actively participates and contributes to safety adherence and understanding across the organization with regards to sustaining electrical safety best practices. Repair and maintain electrical systems and related components for industrial equipment; Install power supply wiring and diagnose or troubleshoot malfunctions; Repair or replace faulty components, such as relays, switches, motors or fixtures; Electricians prepare reports of maintenance and repair activities, including modifications of schematics or blueprints; Participate in safety meetings and training activities; Follow established safety and operating procedures and practices. Moog electricians work with minimum supervision and daily duties involve reading and interpreting work orders; Technical descriptions; Safety manuals including NEC, NFPA 70e, and ANSI, reading and following electrical code, manuals, schematics, specifications and circuit prints. Electricians consult with operators, engineers, factory and manufacturing representatives or area managers on maintenance problems and projects; Coordinate with operating personnel regarding maintenance and repair activities; Adhering to all necessary safe-work permits; Install, repair and maintain motors, electrical operating equipment, switches, relays and fixtures. Inspect / maintain transformers, buss bars, circuit breakers, and wiring connections in power distribution substations; Troubleshoot electrical equipment, switchgear, controls and wiring using test equipment. Repair motor starters and controls; Test continuity of circuits to ensure electrical compatibility and safety of components using voltmeters, ohmmeters, and meggers. Benefits \n • 401(k) matching\n, • Benefits from day one\n, • Dental insurance\n, • Employee stock purchase plan\n, • Health insurance\n, • Paid time off\n, • Tuition reimbursement\n, • Vision insurance\n, • Onsite Pharmacy\n, • Onsite Vision Store\n, • Onsite Health\n, • 2nd and 3rd shift employees receive 10% shift differential pay. \n\n Salary Range Transparency: Buffalo, NY $36.05-$43.72 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

$26.00/Hour, Benefits on Day 1! Monday-Friday 1st Shift, No nights or weekends ESSENTIAL DUTIES AND RESPONSIBILITIES * Trim and customize portions of meat products using knives, band saws or other meat production equipment. * Count and stack on tray portions per customer and company specifications. * Label portion with supplied product labels. * Read and understand cut tickets. * Set up the cutting room as required. * Keep cutting rooms and surrounding area clean and sanitized. * Follow company GMP (Good Manufacturing Practices) to maintain sanitary conditions. * Train and mentor junior level cutters in basic skills improvement * Work continually in a refrigerated environment 35°F- 45°F. * Complete miscellaneous other duties as assigned. * Finish time is when work is completed and could require overtime without notice. RELATIONSHIPS * Internal: The incumbent is required to interact with employees, sales, and management at levels of responsibility throughout the company in a professional manner. * External: N/A WORK ENVIRONMENT * Onsite: Must be able to work continually in a refrigerated environment 35°F- 45°F. MINIMUM QUALIFICATIONS * Skilled as a specialty meat cutter using knives required. * Minimum (5) years’ experience as a meat cutter including middle meats such as filets and ribeye. * Experience with band saws, laser portion machinery or other meat production equipment is required. * Ability to work in a fast-paced production environment. * Must be able to read, write and communicate in English as it relates to the job and to the safety regulations. * Must have basic math skills (add, subtract, multiply, divide) * Ability to read and understand customers specifications and do basic math functions. EDUCATION * High school diploma or GED equivalent preferred. CERTIFICATIONS/TRAINING * Knowledge of poultry, beef, lamb, and pork products including USDA grades and standards. * Knowledge of NAMA guidelines and product cut numbers required. PHYSICAL QUALIFICATIONS * Must be able to perform the following physical activities for the described length of time. OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: OCCASIONALLY DRIVE VEHICLE: N/A SIT: OCCASIONALLY LIFT 1-10 lbs (Sedentary): OCCASIONALLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): N/A CARRY 1-10 lbs (Sedentary): OCCASIONALLY 11-20 lbs (Light): OCCASIONALLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): N/A PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: OCCASIONALLY TWIST: FREQUENTLY GRASP OBJECTS 3: CONTINUOUSLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $25.00-$26.00/Hour. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off , short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: ___.

Are you financially happy in your current role? Does your current position have opportunities for growth and a rewarding career? If you need to make more money and have a pathway to career advancement, then Erie Home is just the opportunity you’ve been looking for! As an Erie Home Territory Sales Representative, you are a trusted consultant and the face of our premium brand. You will use your expertise to educate homeowners on our roofing solutions, showing them exactly how we solve their most pressing challenges. • Generate Leads: Walk designated neighborhoods and engage prospective customers., • Educate & Consult: Introduce homeowners to Erie Home's solutions and schedule them for a free, no-obligation estimate with our Outside Sales team., • Represent the Best: Ensure all potential customers have an exceptional experience, reflecting the high quality and professional standards of Erie Home., • Hit Goals: Achieve individual and team goals each week and get paid well for it! (Transportation provided for neighborhood routes.), • Unlimited Earnings: Steady base hourly wage, uncapped commissions, and weekly bonuses., • Weekly Pay on Fridays!, • Full Benefits: Medical, dental, vision, life insurance, 401(k) with company match, and PTO., • Rapid Growth: Clear path for career advancement opportunities., • Rewarding Environment: Fun contests, incentives, and a competitive atmosphere., • Full-Time: Monday–Thursday, 11 AM–8 PM, • Saturday: 10 AM–4 PM (Some Fridays may rotate with Saturdays), • Highly motivated, competitive, and goal-oriented mindset., • Friendly, outgoing personality—not shy about starting conversations., • Strong work ethic and ability to work outdoors daily in various elements (extended walking/standing required)., • Must be a quick learner, open to coaching, and possess a positive, resilient attitude., • Reliable transportation to and from the office. If you’re eager to work hard, earn big, and grow quickly in a high-energy environment, this is the opportunity for you. Apply now – we’re hiring immediately! Erie Home is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, political affiliation, sexual orientation, marital status, disability, age, military service, or any other protected class. If you need a reasonable accommodation due to a disability, please contact Human Resources with your request and contact information.

Job Description🔥 Welder / Fabricator – $25-29/hr (1st Shift) Join a leading manufacturer of engineered process equipment used in heat transfer and liquid filtration systems. From automatic strainers and heat exchangers to aftercoolers and cyclone separators, you’ll be part of a team that builds high‑performance industrial systems with precision and pride. 🌟 Why You’ll Love Working Here This company invests in its people and rewards high‑quality work. You’ll enjoy: • 💰 401(k) with company match, • 🏥 80% employer‑paid health insurance, • 👀 Full medical, dental & vision benefits, • 👓 Annual eyewear/equipment allowance, • 👢 $150 boot allowance each year, • 🔧 Interesting, varied projects—no two builds are the same, • Performing high‑quality welds, repairs, and assemblies using multiple welding techniques, • Operating fabrication equipment (brakes, rolls, shears, drill presses, flame cutters), • Measuring and verifying workpiece specifications with precision tools, • Reading and interpreting blueprints, schematics, and build drawings, • Setting up and running machine tools (drill press, end mill, edge planer), • Assembling and installing equipment using both hand and power tools, • Aligning and fastening machine components accurately during assembly, • Operating lathes and additional fabrication equipment as needed, • Cutting, threading, bending, and connecting metal and non‑metal piping, • Securing piping with brackets, clamps, and hangers, • Performing both TIG and MIG welding on stainless steel and carbon steel📚 What You Bring, • 4+ years of welding and fabrication experience, • Strong proficiency in TIG and MIG welding on stainless & carbon steel, • Ability to read and interpret blueprints and technical drawings, • Experience running fabrication machinery and shop tools, • High school diploma or GED required, • Strong attention to detail, craftsmanship, and safety awareness⭐ Bonus Skills, • Fabrication‑heavy experience, • Pulse welding experience, • Moderate noise, heat, and active fabrication equipment, • Standing, lifting, bending, and hands‑on work for the full shift, • A safety‑focused culture with required PPE This is a Permanent position based out of Tonawanda, NY. Pay and Benefits The pay range for this position is $25.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tonawanda,NY. Application Deadline This position is anticipated to close on Mar 17, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Are you seeking a career that makes a meaningful impact on the world? Join us in our mission to empower children with Autism to achieve their full potential and lead joyful, fulfilling lives. Explore lucrative opportunities in the Applied Behavior Analysis (ABA) field, where you can bring about real change for children and their families. Become a part of a devoted community of professionals in ABA, driven by a shared passion for enhancing lives. Perks: * Same Day Pay! No more waiting for payday — now you can access a portion of your paycheck right after you clock out. Whether it's an emergency or you just need funds sooner, you'll have the flexibility to get paid immediately. Your time. Your money. On your schedule. * Enjoy job security and advancement opportunities in the thriving ABA industry! * Experience flexibility and autonomy in your schedule, making it an ideal opportunity for college students. * Great opportunities for anyone in Special Education or related fields, as many positions offer afternoon or evening hours. * Receive competitive compensation. * Ideal for those seeking part-time positions. * A fantastic entry point into the field of psychology, providing valuable real-world experience. * No experience required! Responsibilities: • Provide one-on-one ABA services to clients, using evidence-based interventions supporting independence and positive behavior., • Serve as an integral member of our clinical team, responsible for the direct implementation of skill building and care plans., • Record session data accurately using electronic devices., • Foster a positive learning environment for clients and connect with families., • High school diploma or equivalent., • Willingness to learn and passionate about making a difference for children with Autism., • Patience, compassion, and the ability to maintain a calm demeanor in challenging situations., • Services will be provided in clients' homes or in the community-based locations., • All positions start off part-time., • Encouraged to take the 40-hour Registered Behavior Technician course. Great Fit If You Have Experience In: * Education or early childhood development * Childcare, babysitting, or youth mentorship * Teaching assistant, paraprofessional, or instructional aide roles * After-school programs or camp counseling * Behavioral health, mental health, or social services * ABA therapy or working with individuals with Autism * Healthcare support (DSP, CNA, HHA, PCA, caregiver) * Supporting a neurodiverse family member or loved one * Behavior Technician, ABA, Registered Behavior Technician No experience? No problem! If you're compassionate, patient, and passionate about making a difference, we encourage you to apply. Apply today to join our team, begin your career in ABA, and make that positive difference!

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Electrician - 2nd Shift Reporting To: Supervisor, Electrical Maint. Work Schedule: Onsite - Buffalo, NY Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. To be considered for this role, here's what you'll need to bring with you: \n • High School diploma or GED preferred. Otherwise, demonstrated ability to understand and apply all verbal, written and computer work instructions or training in English, and demonstrated ability to perform simple addition, subtraction, multiplication and division.\n, • Minimum of 5 years electrician work experience (industrial setting preferred).\n, • Demonstrated proficiency as an Electrician (Electrical primary craft)\n, • Able to demonstrate basic computer skills, math and problem-solving; mechanical, numerical and verbal aptitude to learn our jobs quickly\n, • Must be able to work call-ins and overtime when support is needed\n, • Able to use standard safety equipment; must be able to lift up to 50 pounds\n, • Able to climb ladders/stairs and work at heights using manlifts, scaffolding, and ladders.\n, • Able to work in tight or closed-in spaces\n, • Ability to train on 1st shift for a minimum of 3 months before assignment to 3rd shift.\n\n Moog Electrician Essential Job Functions: Actively participates and contributes to safety adherence and understanding across the organization with regards to sustaining electrical safety best practices. Repair and maintain electrical systems and related components for industrial equipment; Install power supply wiring and diagnose or troubleshoot malfunctions; Repair or replace faulty components, such as relays, switches, motors or fixtures; Electricians prepare reports of maintenance and repair activities, including modifications of schematics or blueprints; Participate in safety meetings and training activities; Follow established safety and operating procedures and practices. Moog electricians work with minimum supervision and daily duties involve reading and interpreting work orders; Technical descriptions; Safety manuals including NEC, NFPA 70e, and ANSI, reading and following electrical code, manuals, schematics, specifications and circuit prints. Electricians consult with operators, engineers, factory and manufacturing representatives or area managers on maintenance problems and projects; Coordinate with operating personnel regarding maintenance and repair activities; Adhering to all necessary safe-work permits; Install, repair and maintain motors, electrical operating equipment, switches, relays and fixtures. Inspect / maintain transformers, buss bars, circuit breakers, and wiring connections in power distribution substations; Troubleshoot electrical equipment, switchgear, controls and wiring using test equipment. Repair motor starters and controls; Test continuity of circuits to ensure electrical compatibility and safety of components using voltmeters, ohmmeters, and meggers. Benefits \n • 401(k) matching\n, • Benefits from day one\n, • Dental insurance\n, • Employee stock purchase plan\n, • Health insurance\n, • Paid time off\n, • Tuition reimbursement\n, • Vision insurance\n, • Onsite Pharmacy\n, • Onsite Vision Store\n, • Onsite Health\n, • 2nd and 3rd shift employees receive 10% shift differential pay. \n\n Salary Range Transparency: Buffalo, NY $36.05-$43.72 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Mill Machinist II - 2nd Shift Reporting To: Management, General Manufacturing & Operations Work Schedule: Onsite - Buffalo, NY Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Our team in Commercial Aircraft Group is looking for a CNC Mill Machinist II to join them. You will report to the department Performance Leader and will have an onsite work schedule in West Falls, NY. To be considered for this role, here's what you'll need to bring with you: \n • High School diploma or GED preferred. Otherwise, demonstrated ability to understand and apply all verbal, written and computer work instructions or training in English, and demonstrated ability to perform simple addition, subtraction, multiplication and division.\n, • At least 3 years of experience as a CNC Mill Machinist.\n, • In accordance with strict Federal Aviation Agency (F.A.A.) regulations regarding Safety Sensitive Work (S.S.W.), employee enrollment & participation in the company's "F.A.A. Drug & Alcohol Program" is a requirement for this position.\n\n As a Mill Machinist II, you will: \n • Work under minimum supervision and help in the planning of work and solving of problems within the cell.\n, • perform set-ups and run parts on a CNC lathe with milling capabilities to close tolerances, fine finishes, and complex geometry.\n, • Be responsible for the inspection of all work performed, setting up or adjusting gaging equipment, detecting unusual conditions, deviant parts; and when needed recognizing errors in blueprints and operation sheets.\n, • Interpret complex drawings, including GD&T blueprints, sketches and operation sheets\n\n How we care for you: • Financial Rewards: great compensation package, annual profit sharing, matching 401k and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts \n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance \n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages \n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs \n\n, • Collaborative and Welcoming Workplace: Inclusive culture rooted in our values, enhanced by Employee Resource Groups, and team-building activities.\n, • Additional site-specific benefits may be offered\n\n, • 2nd and 3rd shift employees receive 10% shift differential pay. \n Salary Range Transparency: Buffalo, NY $28.00-$32.00 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Job DescriptionDescription: Snyder Industries, Inc., has openings for CNC Machinists. At Snyder Industries we are serious about our commitment to our employees. We are aligning ourselves to be an employer of choice among manufacturers and want to help you grow both personally and professionally. Available benefits include: Work/life balance with optional overtime Flexible schedule Double-time pay for all hours worked over 48 in a workweek 15% shift differential Quarterly Bonuses Medical ( 100% paid option available) Dental and Vision Life Insurance Paid Time Off A rewarding 401(k) program Annual work boot allowance Onsite Fitness Center Onsite Cafeteria Life Resources through our EAP Apply now to join our team of growing professionals and work for a company you’ll be proud of! An industry leader with over 50 years of experience, we specialize in providing high quality components for the heavy equipment industry utilizing our updated mills, lathes, gear and heat treating/induction machinery. If you desire a team atmosphere and want to excel, look no further! In our climate-controlled shop we offer OT instead of mandating it, making our employees and their needs a top priority to align with the realistic goals set by our customers. We set the bar high for both safety and cleanliness. Requirements: Objective: Produces machined parts by setting up and operating computer numerical controlled (CNC) machines, maintaining quality, efficiency, and safety standards as well as maintaining equipment and supplies. Role & Responsibilities: Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, locations of surfaces, and machining parameters. Sets up mills and lathes by entering instructions, including zero reference points, setting tool registers, offsets, compensation and conditional switches, calculating requirements, including basic math, geometry, and trigonometry, proving part programs. Sets up mills and lathes by installing and adjusting three and four jaw chucks, tools, and attachments. Verifies settings by measuring first run parts and sample work pieces, adhering to established standards. Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling, and thread chasing operations, detecting malfunctions, troubleshooting processes, replacing worn tools, and adhering to quality assurance procedures and processes. Maintains equipment by completing minor preventive maintenance requirements, notifying maintenance of issues and completing maintenance request forms. Maintains continuity between shifts by communicating job status, irregularities, and continuing needs. Completes production and quality logs as required Maintains safe operations by adhering to safety procedures and regulations. Handles miscellaneous duties as required. Education & Experience: High School diploma or equivalency Skills & Abilities: Must be able to grasp conceptual items Must be able to follow G Code Participate in process improvement Must have good communication skills Possess a good mechanical aptitude Applies tooling coordination requirements Gives attention to detail Must be able to stand, stoop, bend, twist, reach, as well as wrench parts Ability to lift up to 50lbs occasionally Position Type/Expected Hours of Work: Hourly M-Th- 3 pm - 11: 30 pm, F 2:30 pm - 11 pm (2nd shift hours) Optional Overtime Equal Employment Opportunity Statement: Snyder Industries provides equal employment opportunity to all applicants and employees without regard to race, color, gender, age, disability, religion, creed, national origin, genetic predisposition, marital status, sexual orientation, victims of domestic violence, gender identity, gender expression, political belief or activity, veteran status, victims of domestic violence, familial status or any other status protected by law.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Lathe Machinist III - 2nd Shift Reporting To: Leader, Performance Work Schedule: Onsite - Buffalo, NY Moog is the world-wide leader of advanced flight controls and actuation for commercial and military aircraft. We are positioned on virtually every aircraft flying today, supplying highly reliable systems that are supportable and add significant value for our customers. To be considered for this role, here's what you'll need to bring with you: \n • High School diploma or GED preferred. Otherwise, demonstrated ability to understand and apply all verbal, written and computer work instructions or training in English, and demonstrated ability to perform simple addition, subtraction, multiplication and division.\n, • At least 4 years of experience as a CNC Lathe Machinist, working on Lathe machines with Mill capabilities.\n, • Demonstrated working knowledge of G-Code\n, • Knowledge of Fanuc controls a plus\n, • Having knowledge of B axis Mill Turns with main and sub spindle a plus.\n\n As a Lathe Machinist III, you will: \n • Work under minimum supervision and help in the planning of work and solving of problems within the cell. \n, • perform set-ups and run parts on a CNC lathe with milling capabilities to close tolerances, fine finishes, and complex geometry.\n, • Be responsible for the inspection of all work performed, setting up or adjusting gaging equipment, detecting unusual conditions, deviant parts; and when needed recognizing errors in blueprints and operation sheets.\n, • Interpret complex drawings, including GD&T blueprints, sketches and operation sheets\n\n How we care for you: • Financial Rewards: great compensation package, annual profit sharing, matching 401k and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts \n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance \n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages \n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs \n\n, • Collaborative and Welcoming Workplace: Inclusive culture rooted in our values, enhanced by Employee Resource Groups, and team-building activities.\n, • Additional site-specific benefits may be offered\n\n, • 2nd and 3rd shift employees receive 10% shift differential pay.\n Salary Range Transparency: Buffalo, NY $32.00-$36.00 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Manufacturing Engineer/CNC Programmer - Swiss Type Lathe Reporting To: Ldr., Mfg. Engrg. Tech. Work Schedule: Onsite - Buffalo, NY Our Military Aircraft Group is seeking a Manufacturing Engineer/CNC Swiss Type Lathe Programmer to join our Small Parts Manufacturing Group in East Aurora, NY. This is your opportunity to join a high-impact team where innovation meets precision, and your expertise drives the development of cutting-edge aerospace components. As a Manufacturing Engineer/CNC Swiss Type Lathe Programmer, you'll be at the forefront of both new product development and continuous improvement of existing manufacturing processes. You'll work hands-on with Swiss type lathe parts, applying advanced CNC programming and machining knowledge to solve challenges and optimize performance. As a Manufacturing Engineer/CNC Programmer, you will: \n • Develop and optimize CNC Swiss Type Lathe machining processes for both new and legacy components.\n, • Create detailed CNC programs and manufacturing instructions that meet rigorous engineering specifications.\n, • Define operation sequences, tooling, gauging, and machine requirements for precision part fabrication.\n, • Troubleshoot shop floor issues, including tooling, gauging, workholding, and inspection challenges.\n, • Collaborate with cross-functional teams to resolve manufacturing problems and enhance producibility.\n, • Create detailed operation sheets and NC programs to produce high-precision machined parts and sub-assemblies.\n, • Review engineering drawings for manufacturability and recommend design improvements.\n, • Assist in the creation of machine-ready code and be hands-on in the production environment, assisting with program prove-outs and troubleshooting.\n, • Estimate setup/run times and tooling hours; contribute to cost estimation for new business proposals.\n, • Mentor junior engineers and lead continuous improvement initiatives in processes and equipment.\n\n To be considered for this role, here's what you'll typically bring with you: \n • A Bachelor's degree in a technical field with 3+ years of relevant professional experience, or an Associate degree with 6+ years of relevant professional experience, or a High School Diploma/GED with 8+ years of proven professional experience\n, • Proficiency in CNC Lathe Machining, including Swiss Type Lathe and Mill/Turn machining centers\n, • Hands-on experience with machine setup and operation\n, • Eligibility to access U.S. export-controlled information\n\n It'd be great if you also had: \n • Expertise in programming, setup, operation, and troubleshooting of complex CNC machining processes, especially Swiss Type Lathe machines\n, • Familiarity with Star Swiss Type Lathe Machines\n, • A degree in Mechanical, Manufacturing, or Industrial Engineering\n, • Background in the aerospace industry\n, • Skills in inspection of machined parts\n, • Hands-on experience machining stainless steel, titanium, and aluminum\n, • Proficiency in CNC Programming using Autodesk Partmaker or ESPRIT CAM.\n, • Knowledge of Lean Manufacturing principles; Lean Six Sigma certification is a plus\n\n How we care for you: \n • \nFinancial Rewards: great compensation package, annual profit sharing, matching 401k and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts\n, • \nWork/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance\n, • \nHealth & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages\n, • \nProfessional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs\n, • \nCollaborative and Welcoming Workplace: Inclusive culture rooted in our values, enhanced by Employee Resource Groups, and team-building activities.\n, • Additional site-specific benefits may be offered\n\n Salary Range Transparency: Buffalo, NY $80,000.00-$120,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Model Maker Machinist V- 2nd Shift Reporting To: Leader, Performance Work Schedule: Onsite - Buffalo, NY Moog is the world-wide leader of advanced flight controls and actuation for commercial and military aircraft. We are positioned on virtually every aircraft flying today, supplying highly reliable systems that are supportable and add significant value for our customers. The Model Maker Machinist V is expected to work with little or no technical direction and therefore must make technical decisions in the areas of fixturing, tooling, set-up, inspection methods, processing, fabrication, and sequencing at the machine level. This requires independent thinking, problem-solving skills, and initiative. Due to the nature of the incoming work and the potential for rapidly changing priorities, the incumbent must be flexible in order to effectively manage scheduling conflicts. Moog is offering a $3500.00 sign on bonus for this role. To be considered for this role, here's what you'll need to bring with you: \n • High School diploma or GED preferred. Otherwise, demonstrated ability to understand and apply all verbal, written and computer work instructions or training in English, and demonstrated ability to perform simple addition, subtraction, multiplication and division.\n, • At least 7 years of relevant experience as a diversified machinist\n\n As a Model Machinist V, you will: \n • Interpret complex drawings, sketches, EPs, and operation sheets.\n, • Program, set up, and run CNC equipment as well as manual/conventional equipment with minimal supervision or guidance. This will include machining complex development parts by creating and using CAD-generated solid models and 3D CNC tool path programming techniques.\n, • Be responsible for the creation, building, production, rework, and repair of tooling and fixturing as well as development, prototype, R&D and production hardware in the form of piece parts, components or assemblies\n, • Actively participate in process improvement and lead project teams within the department. \n\n Our Benefits: \n • Comprehensive medical, dental, and vision benefits on day one\n, • Flexible planned vacation\n, • 401K, profit share, and employee stock purchase options\n, • Tuition reimbursement program\n, • Inclusive company culture\n, • 2nd and 3rd shift employees receive 10% shift differential pay. \n\n Salary Range Transparency: Buffalo, NY $35.00-$45.00 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Supplier Manufacturing Engineer Reporting To: Strategic Sourcing Manager Work Schedule: Hybrid - Buffalo, NY As a Supplier Manufacturing Engineer, you will collaborate with experienced professionals, including Design, Product, Methods, Quality, and Supplier Development Engineers, as well as Procurement Professionals, to help our external supply base execute our externally fabricated components in a collaborative way that sets them up for success. This includes commodities such as machined parts, springs, seals, filters, and more. This role combines hands-on engineering work with the ability to represent Moog through our supply chain in a collaborative and communicative fashion. You will support both new product development and mature production programs. Working within Supply Chain, you will contribute to continuous improvement initiatives and help drive efficiency and innovation in modern fabrication environments. This role does require up to 25% travel, with additional local travel needs on a frequent basis. As a Supplier Manufacturing Engineer, you will: \n • Take guidance from the Strategic Sourcing Manager and Supplier Development Engineer on strategic initiatives with our external supply base\n, • Participate in the strategic effort to onboard a second Virtual Factory for machined components\n, • Assist the Supplier Development Engineer in the effort to find new high-volume suppliers for our anticipated business growth\n, • Review supplier CNC programs, digital work instructions, inspection techniques, and tooling specifications for compliance with the Moog drawing and quality flow-downs\n, • Collaborate with the Supplier Development Engineer to understand the specific capabilities of our critical and strategic suppliers, specifically including their understanding of Moog's deburr requirements\n, • Collaborate with design engineering to ensure manufacturability and cost efficiency\n, • Analyze production data to identify trends and drive improvements\n, • Work closely with vendors to resolve technical concerns and improve external manufacturing operations\n\n To be considered for the Supplier Manufacturing Engineer role, here's what you'll need to bring with you: • Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering plus two years' relevant experience\n\n, • -OR- Associates degree in Mechanical, Industrial, or Manufacturing Engineering plus six years' relevant experience\n, • -OR- a high school diploma or equivalent with ten years' relevant experience\n, • Strong foundational knowledge of machining, deburring, and inspection techniques\n, • Strong analytical and problem-solving skills with a collaborative mindset\n, • Strong communication skills\n\n It'd be great if you also had: \n • Certifications in lean, manufacturing, supply chain, or other related area\n, • Familiarity with ERP and MRP systems\n, • Knowledge of GD&T, precision machining, and advanced material\n\n Salary Range Transparency: Buffalo, NY $80,000.00-$110,000.00 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

\n Delivery Driver \n \n The salary range for this role is $18.75 to $19.75 per hour/annually.* \n \n Delivery Drivers Keep Aaron’s Moving \n This isn’t some tedious desk job. On our team, you’ll be inside, outside, driving, installing, showing customers how to use merchandise and much more. And since this position is store-based, you’ll be asked to support the store by assisting with moving, installing, and picking up merchandise. Every day will be different, but you’ll connect with lots of good people in our community along the way. \n \n\n\n Your Career Starts Here \n With Aaron’s, being a Delivery Driver can be the first step on a great career journey. Here’s one possible path with us: \n Delivery Driver > Customer Accounts Advisor > Sales Manager > Customer Accounts Manager > General Manager \n \n The Details \n What You Need: \n\n \n What You’ll Do: \n\n • Load, secure and protect merchandise\n, • Offload, install and demonstrate merchandise\n, • Safely operate delivery vehicle\n, • Assist in store when needed\n\n \n Additional Requirements: \n\n • Age: 21 (18 in Canada)\n, • HS diploma or equivalent preferred\n, • Must meet DOT requirements for certification (U.S.)\n, • Able to perform physical job including lifting up to 50 lbs. without help and 300 lbs. with a dolly (don’t worry, we’ll train you and give you the tools to do it safely)\n, • Able to work in all outdoor weather, including rain or summer sun\n, • A valid driver’s license is required, but not a CDL\n, • No overnight travel\n\n\n \n Aaron’s Total Rewards \n\n\n Our team members are our greatest asset. As an expression of our appreciation, Aaron’s is proud to offer outstanding career training, competitive performance incentives, excellent advancement opportunities, and a distinctive benefits package which includes**: \n\n\n\n • Paid time off, including vacation days, sick days, and holidays \n\n\n\n\n, • Medical, dental and vision insurance \n\n\n\n\n, • 401(k) plan with contribution matching \n\n\n\n \n\n\n *Note that the pay range provided above is the lowest to highest rate we in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay position within the salary range will be based on several factors including, but limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, shift, travel requirements, sales or revenue-based metrics, any collective bargaining agreements, and business or organizational needs. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, or any other form of compensation that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company’s sole discretion, consistent with the law. \n\n\n \n\n\n **Benefits vary based on FT and PT employment status. \n

At DuPont, our purpose is to empower the world with essential innovations to thrive. We work on things that matter. Whether it's providing clean water to more than a billion people on the planet, producing materials that are essential in everyday technology devices from smartphones to electric vehicles, or protecting workers around the world. Discover the many reasons the world's most talented people are choosing to work at DuPont. Why Join Us | DuPont Careers DuPont's Water & Protection is recruiting for an Industrial Electrician to join its dynamic team located at its manufacturing site in Buffalo, NY. Yerkes Buffalo is the North American manufacturing home of Corian® solid surface products, introduced in 1968 and the founding manufacturing location for Tedlar® polyvinyl fluoride (PVF) films, introduced in 1961. We are looking for people who have a passion for delivering innovative, sustainable solutions that meet our customer needs for a better, healthier, safer life. As an Industrial Electrician you will perform all phases of installation, maintenance, repair, and inspection of electrical and instrumentation systems. This position typically operates on a rotating schedule. This is a bargaining union opportunity; those selected may be expected to join the local union. RESPONSIBILITIES DESCRIPTION Your key responsibilities will be/what you'll do: \n • Repair, adjust, and install electrical equipment including but not limited to: programmable controllers and recorders, transmitters and transducers, motor control centers, power lift trucks, building lighting, heating, AC and ventilation equipment, electrical motors, complex electronic devices, control panels, relays, conduit and switches\n, • Troubleshoots and repairs complex problems: visually inspects diagnoses and observes electro-mechanical and pneumatic systems.\n, • Changes-out and repairs AC/DC electric motors and parts, relays, solenoids, and terminal strips\n, • Disassembles equipment to gain access to problem, using crane, hoists, hand tools, power tools, hammers, pry-bars, etc.; examines parts for defects, such as breakage or excessive wear\n, • Uses blueprints, diagrams, repair manuals, calipers, micrometers, scales, and other measuring instruments as required\n\n This position has a current starting rate on days of $38.06 and will increase to $41.87 once assigned to shifts. This position is part of a bargaining unit and shift schedules may change based on the bargaining agreement. JOB QUALIFICATIONS Requirements: \n • Minimum of a High School diploma, G.E.D. or equivalent and 2+ years of experience as an Electrician, Maintenance/Control Mechanic or similar in a manufacturing environment is required\n, • Able to understand and interpret the National Electric Code\n, • Able to troubleshoot and maintain 12V-480V system\n\n A successful candidate will be able to meet the physical requirements of the job with or without reasonable accommodation, including: \n • Willing and able to work a 24/7 rotating shift schedule including holidays and weekends as well as overtime, sometimes on short notice.\n, • Willing and able to lift up to 50 lbs.\n, • Willing and able to meet the physical demands of the position and perform work in confined areas and hard-to-reach conditions\n\n Please note that a minimum requirement for this U.S. based position is the ability to work legally in the United States; no visa sponsorship/support or relocation assistance is available for this position. Join our Talent Community to stay connected with us! DuPont is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information. DuPont offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Manufacturing Engineer - Grind Reporting To: Leader, Mfg. Engineering Tech. Work Schedule: Onsite - Buffalo, NY Our team in Military Aircraft Group looking for a Manufacturing Engineer - Grind to join them. You will report to the Manufacturing Engineering Technical Leader and will have an onsite work schedule in East Aurora, NY. As a Manufacturing Engineer, you will: \n • Develop detailed manufacturing instructions and N/C programs to produce precision parts, determining the best procedures, tooling, and sequencing to bring engineering drawings to life.\n, • Spend hands-on time in production, troubleshooting issues, refining processes, and ensuring smooth operations for the parts you're responsible for.\n, • Generate operation sheets and manufacturing procedures to streamline fabrication, ensuring compatibility with engineering specs and suggesting design tweaks to boost producibility.\n, • Convert N/C program outlines into coded machine instructions, supporting operators during program prove-outs to achieve flawless execution.\n, • Work closely with cross-functional teams to optimize manufacturing processes, establish standard setup and run times, and propose innovative equipment or method changes.\n, • Lead efforts to rework discrepant parts, implement corrective actions, and reduce future issues, ensuring top-notch quality.\n, • Assist in cost estimates for new proposals, guide Associate Manufacturing Engineers, and coordinate with vendors to align internal and external operations.\n, • Promote and uphold fundamental safety principles across the team.\n\n To be considered for this role, here's what you'll typically bring: \n • Bachelor's degree, OR an Associate's degree with 6+ years of relevant experience, OR a High School diploma with 8+ years of relevant experience.\n, • 3+ years of hands-on experience in ID/OD grinding, with a knack for working in tight tolerances (0.0005" or less).\n, • Proven ability setting up and operating machines, paired with stellar communication and documentation skills to collaborate with diverse teams.\n, • A problem-solver's mindset, eager to innovate and improve processes in a high-energy manufacturing environment.\n, • Broad knowledge of external and internal grinding techniques.\n\n Salary Range Transparency: Buffalo, NY $80,000.00-$120,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Grind Machinist II - 3rd Shift Reporting To: Leader, Performance Work Schedule: Onsite - Buffalo, NY Moog is the world-wide leader of advanced flight controls and actuation for commercial and military aircraft. We are positioned on virtually every aircraft flying today, supplying highly reliable systems that are supportable and add significant value for our customers. To be considered for this role, here's what you'll need to bring with you: \n • A high School diploma or equivalent. \n, • At least 3 years of experience as a Grind Machinist\n, • A high degree of comfort setting-up and troubleshooting mechanical issues with CNC Machines.\n, • Proficiency using various measuring equipment, including but not limited to, Micrometers, Calipers, and Dial Bore Gauges. \n, • Competency in reading and interpreting blueprints and written work instructions.\n, • Ability to select grinding wheels, properly dress the wheel and run production parts according to drawing requirements. \n, • Demonstrated ability to hold tight tolerances, typically .001 +/- .0005, associated with the machining of precision parts (GD&T).\n, • In accordance with strict Federal Aviation Administration (F.A.A.) regulations regarding Safety Sensitive Work (S.S.W.), employee enrollment & participation in the company's "F.A.A. Drug & Alcohol Program" is a requirement for this position. \n\n As a Grind Machinist, you will: \n • Work from blueprints, operation sheets and/or verbal instructions.\n, • Grind a wide variety of complex parts having either intricate recessing, interim grooving, numerous steps, tapers, unusual contours, to extremely close tolerances and/or a high degree of finish on two or more of the following type grinders: cylindrical, internal, or surface.\n, • Perform your own set-ups, including chucking and aligning of parts having irregular shapes, selecting proper wheels, speeds, feeds, and operating sequence.\n, • Dress wheels for form, taper, steps, straight and unusual forms.\n, • Perform inspection of all work performed using sine bars, air gages, diatest, V-blocks, profilometers angle plates, and electronic gauging equipment. Detecting unusual conditions, defective materials, and deviate parts; and recognizing errors in blueprints and operation sheets.\n, • Comprehensive medical, dental, and vision benefits on day one\n, • Flexible planned vacation\n, • 401K, profit share, and employee stock purchase options\n, • Tuition reimbursement program\n, • Inclusive company culture\n, • 2nd and 3rd shift employees receive 10% shift differential pay.\n\n Salary Range Transparency: Buffalo, NY $28.00-$32.00 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Job Description We currently have an opening for a Tooling Presetter to support our team. Experience working with hand tools, power tools, automobile maintenance, and home repairs is helpful. In this position, you will complete tasks to support our team and ensure they have the materials required to meet the production schedule and keep work flowing. Our employees are well compensated and eligible for benefits. Responsibilities: • Review the daily schedule and ensure all materials are available and ready for use, • Clean and prepare used tooling, • Operate simple hand tools like, i.e., screwdrivers, wrenches, etc., tool measuring devices like hand and computer system gages, • Input and communicate test results and billing system information, • Provide input to help solve manufacturing problems or issues relating to tool setup, • A high school diploma or equivalent preferred, • Possess a valid driver’s license, • Capable of following tasks, and instruction sheets, working with little to no supervision, multitasking, and focusing on details, • Collaborative, works well with others, exhibits teamwork, • Possess necessary mechanical skills and understanding of how to use tools, • Able to stand, walk, and repeatedly lift for extended periods, • Comply with all safety guidelines to ensure a safe work environment, including always wearing the proper PPE, safely handling materials, tools, and chemicals, and reporting unsafe work conditions or equipment immediately Dental Insurance, Medical Insurance, Vision Insurance, and PTO

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Machinist III - 3rd Shift Reporting To: Leader, Performance Work Schedule: Onsite - Buffalo, NY Moog is the world-wide leader of advanced flight controls and actuation for commercial and military aircraft. We are positioned on virtually every aircraft flying today, supplying highly reliable systems that are supportable and add significant value for our customers. To be considered for this role, here's what you'll need to bring with you: \n • High School diploma or GED preferred. Otherwise, demonstrated ability to understand and apply all verbal, written and computer work instructions or training in English, and demonstrated ability to perform simple addition, subtraction, multiplication and division.\n, • At least 4 years of experience as a CNC Machinist, preferably working on Lathe machines and Mill machines.\n, • Demonstrated working knowledge of G-Code\n, • Knowledge of Fanuc controls a plus\n, • Having knowledge of B axis Mill Turns with main and sub spindle a plus.\n\n As a Machinist III, you will: \n • Work under minimum supervision and help in the planning of work and solving of problems within the cell. \n, • perform set-ups and run parts on a CNC lathe with milling capabilities to close tolerances, fine finishes, and complex geometry.\n, • Be responsible for the inspection of all work performed, setting up or adjusting gaging equipment, detecting unusual conditions, deviant parts; and when needed recognizing errors in blueprints and operation sheets.\n, • Interpret complex drawings, including GD&T blueprints, sketches and operation sheets\n\n How we care for you: • Financial Rewards: great compensation package, annual profit sharing, matching 401k and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts \n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance \n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages \n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs \n\n, • Collaborative and Welcoming Workplace: Inclusive culture rooted in our values, enhanced by Employee Resource Groups, and team-building activities.\n, • Additional site-specific benefits may be offered\n\n, • 2nd and 3rd shift employees receive 10% shift differential pay. \n Salary Range Transparency: Buffalo, NY $32.00-$37.00 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Title: CNC Machinist Location: Mocksville, NC (Onsite) (338 Valley Rd. Mocksville, NC 27028) Shift: 1st Shift (1st shift - Monday - Friday 7am - 3pm) Pay:$24 - $28 per hour Based on Experience About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled CNC Machinistto perform a variety of tasks as assigned in conjunction with the assembly of our product. You will ensure all parts fit correctly and are suitable for the final product. This position is responsible for safely performing high-level continuous work to quality standards. Assignments may change based on business demands. You must have desired technical knowledge and possess great manual dexterity. Ability to interpret instructions represented in manuals, drawings, schematics etc. and follow them with precision. Responsibilities: • Uses blueprints, sketches, drawings, and/or job instruction sheets to produce dimensions and tolerances of finished work-piece and setup requirements., • Cutting tools, attachments, accessories, and materials on machines such as mills, lathes, grinders, machining centers, drill presses, and drill machines., • Enters commands to retrieve, input, or edit control information for CNC machines., • Sets up, operates, and monitors machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required., • Utilizes a variety of measurement tools and methods to evaluate finished parts against specifications., • Reworks parts that don't meet specifications., • Confers with supervisor, engineers, and production personnel to resolve machining problems., • Follows all ISO procedures and safety rules, including wearing personal safety equipment and performing hoist inspections., • Routes completed parts to next machine according to the routing sequence., • Performs data entry on the computer to update part locations., • Updates work order cover sheets, daily production sheets, status sheets, and quality records., • Participates in regular communication among peers and Team Leads to maintain productivity and solve problems as they arise., • Operates with the close attention to detail required to meet print specifications, down to 0.0002in tolerances., • Maintains 5S standards of organization and housekeeping of work area., • Participates in improvement efforts for cell layout, process efficiencies, etc., • High school diploma or GED, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints, memos, and procedure manuals., • Ability to effectively share information about job duties in one-on-one and small group situations to supervisor, customers, clients, and other employees of the organization., • Ability to perform basic calculations with numbers between 0.0001 and 0.1, • Ability to convert between metric and US standard units of measure., • Ability to understand and carry out detailed written or oral instructions., • Ability to deal with problems involving several variables, • Ability to use standard problem-solving methods (ie. 5 Whys) as trained, • Ability to stand and walk up to 8 hours continuously during a shift., • Ability to lift up to 35 lbs alone, or 70 lbs with assistance, repeatedly over an 8 hour shift, • Ability to push or pull up to 35 lbs., • Associates degree, or training certification Pay Range: Starting Pay will range between $24.00 - $28.00 per hour depending on qualifications and experience. This is a full-time, hourly position. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Grind Machinist II- 2nd Shift Reporting To: Leader, Performance Work Schedule: Onsite - Buffalo, NY Moog is the world-wide leader of advanced flight controls and actuation for commercial and military aircraft. We are positioned on virtually every aircraft flying today, supplying highly reliable systems that are supportable and add significant value for our customers. To be considered for this role, here's what you'll need to bring with you: \n • A high School diploma or equivalent. \n, • At least 3 years of experience as a Grind Machinist\n, • A high degree of comfort setting-up and troubleshooting mechanical issues with CNC Machines.\n, • Proficiency using various measuring equipment, including but not limited to, Micrometers, Calipers, and Dial Bore Gauges. \n, • Competency in reading and interpreting blueprints and written work instructions.\n, • Ability to select grinding wheels, properly dress the wheel and run production parts according to drawing requirements. \n, • Demonstrated ability to hold tight tolerances, typically .001 +/- .0005, associated with the machining of precision parts (GD&T).\n, • In accordance with strict Federal Aviation Administration (F.A.A.) regulations regarding Safety Sensitive Work (S.S.W.), employee enrollment & participation in the company's "F.A.A. Drug & Alcohol Program" is a requirement for this position. \n\n As a Grind Machinist, you will: \n • Work from blueprints, operation sheets and/or verbal instructions.\n, • Grind a wide variety of complex parts having either intricate recessing, interim grooving, numerous steps, tapers, unusual contours, to extremely close tolerances and/or a high degree of finish on two or more of the following type grinders: cylindrical, internal, or surface.\n, • Perform your own set-ups, including chucking and aligning of parts having irregular shapes, selecting proper wheels, speeds, feeds, and operating sequence.\n, • Dress wheels for form, taper, steps, straight and unusual forms.\n, • Perform inspection of all work performed using air gages, diatest, V-blocks, profilometers angle plates, and electronic gauging equipment. Detecting unusual conditions, defective materials, and deviate parts; and recognizing errors in operation sheets.\n, • Participate in the planning of work within the Cell and help solve problems occurring within the Cell. \n\n How we care for you: • Financial Rewards: great compensation package, annual profit sharing, matching 401k and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts \n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance \n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages \n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs \n\n, • Collaborative and Welcoming Workplace: Inclusive culture rooted in our values, enhanced by Employee Resource Groups, and team-building activities.\n, • Additional site-specific benefits may be offered\n\n, • 2nd and 3rd shift employees receive 10% shift differential pay. \n Salary Range Transparency: Buffalo, NY $25.00-$32.00 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Associate Supplier Manufacturing Engineer Reporting To: Strategic Sourcing Manager Work Schedule: Hybrid - Buffalo, NY Moog's U.S. policy for new internal opportunities is that the employee must have completed at least 12 months in their current role to be eligible to apply. As an Associate Supplier Manufacturing Engineer, you will collaborate with experienced professionals, including Design, Product, Methods, Quality, and Supplier Development Engineers, as well as Procurement Professionals, to help our external supply base execute our machined parts in a collaborative way that sets them up for success. This role combines hands-on engineering work with the ability to represent Moog through our supply chain in a collaborative and communicative fashion. You will support both new product development and mature production programs. Working within Supply Chain, you will contribute to continuous improvement initiatives and help drive efficiency and innovation in modern fabrication environments. This role does require up to 25% travel. As an Associate Supplier Manufacturing Engineer, you will: \n • Take guidance from the Strategic Sourcing Manager and Supplier Development Engineer on tactical initiatives with our external supply base for machined parts\n, • Review supplier CNC programs, digital work instructions, inspection techniques, and tooling specifications for compliance with the Moog drawing and quality flow-downs\n, • Collaborate with the Supplier Development Engineer to understand the specific capabilities of our machining suppliers\n, • Collaborate with design engineering to ensure manufacturability and cost efficiency\n, • Analyze production data to identify trends and drive improvements\n, • Work closely with vendors to resolve technical concerns and improve external manufacturing operations\n\n To be considered for the Associate Supplier Manufacturing Engineer role, here's what you'll need to bring with you: • Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering\n\n, • -OR- Associates degree in Mechanical, Industrial, or Manufacturing Engineering plus four years' relevant experience\n, • -OR- a high school diploma or equivalent with eight years' relevant experience\n, • Strong foundational knowledge of machining and inspection techniques of metallic parts\n, • Strong analytical and problem-solving skills with a collaborative mindset\n, • Strong communication skills\n\n It'd be great if you also had: \n • Certifications in lean, manufacturing, supply chain, or other related area\n, • Familiarity with ERP and MRP systems\n, • Knowledge of GD&T, precision machining, and advanced materials\n\n Salary Range Transparency: Buffalo, NY $65,000.00-$90,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Title: CNC Machinist Location: Mocksville, NC (Onsite) (338 Valley Rd. Mocksville, NC 27028) Shift: 2nd Shift (2nd shift - Monday - Friday 3pm - 11pm) Pay:$24 - $28 per hour Based on Experience About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled CNC Machinistto perform a variety of tasks as assigned in conjunction with the assembly of our product. You will ensure all parts fit correctly and are suitable for the final product. This position is responsible for safely performing high-level continuous work to quality standards. Assignments may change based on business demands. You must have desired technical knowledge and possess great manual dexterity. Ability to interpret instructions represented in manuals, drawings, schematics etc. and follow them with precision. Responsibilities: • Uses blueprints, sketches, drawings, and/or job instruction sheets to produce dimensions and tolerances of finished work-piece and setup requirements., • Cutting tools, attachments, accessories, and materials on machines such as mills, lathes, grinders, machining centers, drill presses, and drill machines., • Enters commands to retrieve, input, or edit control information for CNC machines., • Sets up, operates, and monitors machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required., • Utilizes a variety of measurement tools and methods to evaluate finished parts against specifications., • Reworks parts that don't meet specifications., • Confers with supervisor, engineers, and production personnel to resolve machining problems., • Follows all ISO procedures and safety rules, including wearing personal safety equipment and performing hoist inspections., • Routes completed parts to next machine according to the routing sequence., • Performs data entry on the computer to update part locations., • Updates work order cover sheets, daily production sheets, status sheets, and quality records., • Participates in regular communication among peers and Team Leads to maintain productivity and solve problems as they arise., • Operates with the close attention to detail required to meet print specifications, down to 0.0002in tolerances., • Maintains 5S standards of organization and housekeeping of work area., • Participates in improvement efforts for cell layout, process efficiencies, etc., • High school diploma or GED, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints, memos, and procedure manuals., • Ability to effectively share information about job duties in one-on-one and small group situations to supervisor, customers, clients, and other employees of the organization., • Ability to perform basic calculations with numbers between 0.0001 and 0.1, • Ability to convert between metric and US standard units of measure., • Ability to understand and carry out detailed written or oral instructions., • Ability to deal with problems involving several variables, • Ability to use standard problem-solving methods (ie. 5 Whys) as trained, • Ability to stand and walk up to 8 hours continuously during a shift., • Ability to lift up to 35 lbs alone, or 70 lbs with assistance, repeatedly over an 8 hour shift, • Ability to push or pull up to 35 lbs., • Associates degree, or training certification Pay Range: Starting Pay will range between $24.00 - $28.00 per hour depending on qualifications and experience. This is a full-time, hourly position. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Title: CNC Machinist Location: Mocksville, NC (Onsite) (338 Valley Rd. Mocksville, NC 27028) Shift: 3rd Shift (3rd shift - Sunday - Friday 11pm - 7am) Pay:$24 - $28 per hour Based on Experience About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled CNC Machinist to perform a variety of tasks as assigned in conjunction with the assembly of our product. You will ensure all parts fit correctly and are suitable for the final product. This position is responsible for safely performing high-level continuous work to quality standards. Assignments may change based on business demands. You must have desired technical knowledge and possess great manual dexterity. Ability to interpret instructions represented in manuals, drawings, schematics etc. and follow them with precision. Responsibilities: • Uses blueprints, sketches, drawings, and/or job instruction sheets to produce dimensions and tolerances of finished work-piece and setup requirements., • Cutting tools, attachments, accessories, and materials on machines such as mills, lathes, grinders, machining centers, drill presses, and drill machines., • Enters commands to retrieve, input, or edit control information for CNC machines., • Sets up, operates, and monitors machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required., • Utilizes a variety of measurement tools and methods to evaluate finished parts against specifications., • Reworks parts that don't meet specifications., • Confers with supervisor, engineers, and production personnel to resolve machining problems., • Follows all ISO procedures and safety rules, including wearing personal safety equipment and performing hoist inspections., • Routes completed parts to next machine according to the routing sequence., • Performs data entry on the computer to update part locations., • Updates work order cover sheets, daily production sheets, status sheets, and quality records., • Participates in regular communication among peers and Team Leads to maintain productivity and solve problems as they arise., • Operates with the close attention to detail required to meet print specifications, down to 0.0002in tolerances., • Maintains 5S standards of organization and housekeeping of work area., • Participates in improvement efforts for cell layout, process efficiencies, etc., • High school diploma or GED, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints, memos, and procedure manuals., • Ability to effectively share information about job duties in one-on-one and small group situations to supervisor, customers, clients, and other employees of the organization., • Ability to perform basic calculations with numbers between 0.0001 and 0.1, • Ability to convert between metric and US standard units of measure., • Ability to understand and carry out detailed written or oral instructions., • Ability to deal with problems involving several variables, • Ability to use standard problem-solving methods (ie. 5 Whys) as trained, • Ability to stand and walk up to 8 hours continuously during a shift., • Ability to lift up to 35 lbs alone, or 70 lbs with assistance, repeatedly over an 8 hour shift, • Ability to push or pull up to 35 lbs., • Associates degree, or training certification Pay Range: Starting Pay will range between $24.00 - $28.00 per hour depending on qualifications and experience. This is a full-time, hourly position. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

At DuPont, our purpose is to empower the world with essential innovations to thrive. We work on things that matter. Whether it's providing clean water to more than a billion people on the planet, producing materials that are essential in everyday technology devices from smartphones to electric vehicles, or protecting workers around the world. Discover the many reasons the world's most talented people are choosing to work at DuPont. Why Join Us | DuPont Careers DuPont's Water & Protection is recruiting for an Industrial Electrician to join its dynamic team located at its manufacturing site in Buffalo, NY. Yerkes Buffalo is the North American manufacturing home of Corian® solid surface products, introduced in 1968 and the founding manufacturing location for Tedlar® polyvinyl fluoride (PVF) films, introduced in 1961. We are looking for people who have a passion for delivering innovative, sustainable solutions that meet our customer needs for a better, healthier, safer life. As an Industrial Electrician you will perform all phases of installation, maintenance, repair, and inspection of electrical and instrumentation systems. This position typically operates on a rotating schedule. This is a bargaining union opportunity; those selected may be expected to join the local union. RESPONSIBILITIES DESCRIPTION Your key responsibilities will be/what you'll do: \n • Repair, adjust, and install electrical equipment including but not limited to: programmable controllers and recorders, transmitters and transducers, motor control centers, power lift trucks, building lighting, heating, AC and ventilation equipment, electrical motors, complex electronic devices, control panels, relays, conduit and switches\n, • Troubleshoots and repairs complex problems: visually inspects diagnoses and observes electro-mechanical and pneumatic systems.\n, • Changes-out and repairs AC/DC electric motors and parts, relays, solenoids, and terminal strips\n, • Disassembles equipment to gain access to problem, using crane, hoists, hand tools, power tools, hammers, pry-bars, etc.; examines parts for defects, such as breakage or excessive wear\n, • Uses blueprints, diagrams, repair manuals, calipers, micrometers, scales, and other measuring instruments as required\n\n This position has a current starting rate on days of $38.06 and will increase to $41.87 once assigned to shifts. This position is part of a bargaining unit and shift schedules may change based on the bargaining agreement. JOB QUALIFICATIONS Requirements: \n • Minimum of a High School diploma, G.E.D. or equivalent and 2+ years of experience as an Electrician, Maintenance/Control Mechanic or similar in a manufacturing environment is required\n, • Able to understand and interpret the National Electric Code\n, • Able to troubleshoot and maintain 12V-480V system\n\n A successful candidate will be able to meet the physical requirements of the job with or without reasonable accommodation, including: \n • Willing and able to work a 24/7 rotating shift schedule including holidays and weekends as well as overtime, sometimes on short notice.\n, • Willing and able to lift up to 50 lbs.\n, • Willing and able to meet the physical demands of the position and perform work in confined areas and hard-to-reach conditions\n\n Please note that a minimum requirement for this U.S. based position is the ability to work legally in the United States; no visa sponsorship/support or relocation assistance is available for this position. Join our Talent Community to stay connected with us! DuPont is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information. DuPont offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page.

For this U.S. based position, the expected compensation range is $22 - $31 per hour. In addition, this position is eligible for overtime pay and may also include premium pay or differentials, depending on location. If you believe this job posting is not compliant with applicable state pay transparency laws in the U.S., please notify the Company as soon as possible upon discovery by completing this form Job Posting Compliance Form. The compensation rate for this position is for candidates located within the United States. Individual pay is determined by several factors including knowledge, job-related skills, experience, and relevant education or training. The compensation range for this full-time position applies to candidates located within the United States. Our salary ranges are determined by reviewing roles of similar responsibility and level. Within the salary range, individual pay is determined by several factors including performance, knowledge, job-related skills, experience, and relevant education or training. Schneider Electric also offers a comprehensive benefits package to support our employees, inclusive of medical, (with member reward points), dental, vision, and basic life insurance, Benefit Bucks (credits to apply towards your benefits), flexible work arrangements, paid family leaves, 401(k) + match, well-being programs and recognition (including service anniversary), 12 holidays per year, 15 days of paid time off per year (pro-rated in the first year of employment based on start date), opportunity to purchase company stock (eligibility depends on start date), and military leave benefits. This position is located in Cheektowaga, NY. This position will train on 1st shift. Once training is complete, 2nd shift will go into effect. What will you do? \n • \nConducting Quality Inspections: Perform thorough inspections and tests on sub-assemblies and finished products to verify compliance with specifications and quality standards.\n, • \nQuality Control Documentation: Maintain and update quality control documentation, including inspection reports, test data, and non-conformance records. Ensure all documentation is accurate, organized, and accessible for reference.\n, • \nTraining and Mentorship: Provide guidance and mentorship to Assembly Technician 1 - 3, ensuring their professional development and maintaining a high level of competence within the team(s).\n, • \nProcess Auditing: Conduct internal process audits to assess adherence to quality procedures, process controls, and best practices. Recommend process improvements and monitor their implementation.\n, • \nContinuous Improvement: Identify opportunities for process optimization and efficiency gains within the quality assurance department and contribute to the implementation of continuous improvement initiatives.\n, • \nRoot Cause Analysis: Utilize problem-solving skills and advanced analytical techniques to identify the root causes of quality issues and non-conformances. Collaborate with cross-functional teams to implement effective corrective and preventive actions.\n, • \nSupplier Quality Management Support: Collaborate with the procurement team to evaluate and monitor suppliers' quality performance, supplier audit support, and address quality-related issues with procurement and suppliers.\n, • \nNew Product Development (NPD) Release: Collaborate with engineering and production teams to approve products for release based on comprehensive quality evaluations and tests.\n, • Performs additional tasks / projects as required.\n\n What skills and capabilities will make you successful? \n • \nInterpretation and Verification: Read and interpret specifications, blueprints, and standards to confirm product requirements. Compare products to requirements and ensure completion of operations or assemblies.\n, • \nInspection: Utilize knowledge of GD&T to inspect products for compliance with order specifications. Identify imperfections and damage. (Minimum 2 years GD&T experience).\n, • \nDefect Management: Reject defective parts, recording the type of defect on the part, container, or inspection tag as required. Ensure segregation of defective parts or materials.\n, • \nTesting and Quality Checks: Conduct various tests and quality checks on products to ensure they meet standards, specifications, and tolerances. Operate diagnostic equipment as needed.\n, • \nData Management: Record and maintain test data, process data, and transactions into the computer.\n, • \nQuality Improvement: Recommend modifications to existing quality or production standards to achieve optimum quality within equipment capabilities.\n, • \nWork Area Maintenance: Ensure the work area is kept clean and always organized.\n, • \nCompliance: Maintain knowledge, understanding, and compliance with company policies and procedures.\n, • \nSafety Advocacy: Promote and insist on safe practices throughout the inspection areas.\n, • \nAdditional Duties: Perform all other duties as assigned.\n\n Requirements: \n • 1-3 years of experience in quality assurance within an electro-mechanical product environment.\n, • Ability to lift up to 40 pounds.\n, • Proficiency in reading and setting tolerances, working from blueprints, and interpreting metal rules.\n, • Strong attention to detail and record-keeping skills.\n, • Computer skills (Microsoft Word, Excel, Email).\n, • Ability to define problems, collect data, establish facts, and draw valid conclusions.\n, • Proficiency in reading, writing, and comprehending simple instructions and correspondence.\n, • Strong mathematical skills, including the ability to compute rates, ratios, and percentages.\n, • Ability to work effectively in a team environment.\n, • ISO9001/AS9100 internal auditing experience is a plus.\n\n Who will you report to? • High school or General Equivalency Diploma (GED).\n, • Proficient in accurate use of micrometers, calipers, and other measuring tools.\n You must submit an online application to be considered for any position with us. This position will be posted until filled. Looking to make an IMPACT with your career? When you are thinking about joining a new team, culture matters. At Schneider Electric, our values and behaviors are the foundation for creating a great culture to support business success. We believe that our IMPACT values - Inclusion, Mastery, Purpose, Action, Curiosity, Teamwork - starts with us. IMPACT is also your invitation to join Schneider Electric where you can contribute to turning sustainability ambition into actions, no matter what role you play. It is a call to connect your career with the ambition of achieving a more resilient, efficient, and sustainable world. We are looking for IMPACT Makers; exceptional people who turn sustainability ambitions into actions at the intersection of automation, electrification, and digitization. We celebrate IMPACT Makers and believe everyone has the potential to be one. Become an IMPACT Maker with Schneider Electric - apply today! €36 billion global revenue +13% organic growth 150 000+ employees in 100+ countries #1 on the Global 100 World's most sustainable corporations You must submit an online application to be considered for any position with us. This position will be posted until filled. Schneider Electric aspires to be the most inclusive and caring company in the world, by providing equitable opportunities to everyone, everywhere, and ensuring all employees feel uniquely valued and safe to contribute their best. We mirror the diversity of the communities in which we operate, and 'inclusion' is one of our core values. We believe our differences make us stronger as a company and as individuals and we are committed to championing inclusivity in everything we do. At Schneider Electric, we uphold the highest standards of ethics and compliance, and we believe that trust is a foundational value. Our Trust Charter is our Code of Conduct and demonstrates our commitment to ethics, safety, sustainability, quality and cybersecurity, underpinning every aspect of our business and our willingness to behave and respond respectfully and in good faith to all our stakeholders. You can find out more about our Trust Charter here Schneider Electric is an Equal Opportunity Employer. It is our policy to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Manufacturing Engineer/CNC Programmer - Milling Reporting To: Leader, Mfg. Engineering Tech. Work Schedule: Onsite - Buffalo, NY Our Military Aircraft Group is seeking a Manufacturing Engineer/CNC Programmer to join our Prismatic Manufacturing Group in East Aurora, NY. This is your opportunity to join a high-impact team where innovation meets precision, and your expertise drives the development of cutting-edge aerospace components. As a Manufacturing Engineer/CNC Programmer, you'll be at the forefront of both new product development and continuous improvement of existing manufacturing processes. You'll work hands-on with milled parts, applying advanced CNC programming and machining knowledge to solve challenges and optimize performance. As a Manufacturing Engineer/CNC Programmer, you will: \n • Develop and optimize CNC Mill machining processes for both new and legacy components.\n, • Create detailed CNC programs and manufacturing instructions that meet rigorous engineering specifications.\n, • Define operation sequences, tooling, gauging, and machine requirements for precision part fabrication.\n, • Troubleshoot shop floor issues, including tooling, gauging, workholding, and inspection challenges.\n, • Collaborate with cross-functional teams to resolve manufacturing problems and enhance producibility.\n, • Create detailed operation sheets and NC programs to produce high-precision machined parts and sub-assemblies.\n, • Review engineering drawings for manufacturability and recommend design improvements.\n, • Assist in the creation of machine-ready code and be hands-on in the production environment, assisting with program prove-outs and troubleshooting.\n, • Estimate setup/run times and tooling hours; contribute to cost estimation for new business proposals.\n, • Mentor junior engineers and lead continuous improvement initiatives in processes and equipment.\n\n To be considered for this role, here's what you'll typically bring: \n • A Bachelor's degree in a technical field with 3+ years of relevant professional experience, or an Associate degree with 6+ years of relevant professional experience, or a High School Diploma/GED with 8+ years of proven professional experience\n, • Proficiency in CNC Milling Machining, including multi-axis vertical or horizontal machining centers\n, • Hands-on experience with machine setup and operation\n\n It'd be great if you also had: \n • A degree in Mechanical, Manufacturing, or Industrial Engineering\n, • Background in the aerospace industry\n, • Experience with machine automation integration\n, • Skills in inspection of machined parts\n, • Hands-on experience machining stainless steel, titanium, and aluminum\n, • Proficiency in CNC Programming using Siemens NX\n, • Knowledge of Lean Manufacturing principles; Lean Six Sigma certification is a plus\n\n How we care for you: \n • Financial Rewards: great compensation package, annual profit sharing, matching 401k and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts\n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance\n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages\n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs\n, • Collaborative and Welcoming Workplace: Inclusive culture rooted in our values, enhanced by Employee Resource Groups, and team-building activities.\n, • Additional site-specific benefits may be offered\n\n Salary Range Transparency: Buffalo, NY $75,000.00-$120,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: EDM Machining Technical Trainer Reporting To: Management, Manufacturing Plant Management Work Schedule: Onsite - Buffalo, NY Moog in East Aurora, NY is seeking an EDM Machining Technical Trainer to join our new training center! As an EDM Machining Technical Trainer, you will work as part of a team to train and mentor employees on the skills and knowledge required to become a proficient EDM machinist for Moog precision components. You will ensure that training programs are designed to meet the needs of the organization and its employees, enhancing their technical skills and knowledge. Students of Moog's Training Center will include current employees, new employees, and apprentices. *You will work an onsite schedule at our training center located in East Aurora, NY. To be considered for the EDM Machining Technical Trainer role, here's what you'll need to bring with you: \n • A secondary school qualification (a HS diploma, G.E.D., etc. in the US) or basic vocational/technical education in related discipline\n, • Over five (5) years of EDM machining experience, inclusive of extensive knowledge in machine operations, programming, and machine safety.\n, • At least five (5) years' experience should also include effective technical training and mentoring of machinists at all levels (beginner to advanced).\n, • The demonstrated ability to coordinate and deliver training sessions, and coordinated materials, including hands-on workshops, seminars, and online courses.\n, • Strong skills in translating technical needs within the business to effective training initiatives to address skills gaps and knowledge transfer protocols.\n, • Excellent communication skills to effectively teach and mentor students.\n, • Must carry a positive attitude and the passion for working with others to help them grow.\n, • Relocation assistance may be available for the right candidate.\n\n It would also be helpful if you had: \n • Additional machining experience, specifically with CNC lathe and mill.\n, • Proficiency in in operations IT tools, systems and routers, such as Teamcenter.\n, • Knowledge of Moog products and machining processes.\n\n As the EDM Machining Technical Trainer, you will... \n • Deliver extensive EDM machining knowledge and experience to training center students, comprehensive of conventional machine tools, manual and CNC machining including programming (Mill, Lathe, EDM, Grind) and manual processes like finishing and metrology.\n, • Translate Moog specific product and process knowledge to address skills gaps within the organization.\n, • Coach/mentor students on machine operations, programming, machine safety, and coach students through kit-based learning in multiple work centers.\n, • Clearly and concisely present training presentations, engage students, and provide one on one coaching.\n\n\n, • Conduct skills gap analyses to identify training needs and develop appropriate training solutions for each student, and for the campus.\n, • Design and develop technical training courses for various levels, from beginners to advanced users.\n, • Work with internal and external stakeholders to ensure training programs align with organizational goals and industry standards.\n, • Assess the effectiveness of training programs through feedback and performance metrics, and implement improvements as needed.\n, • Demonstrate Moog's culture and values in everyday processes, interactions, and activities.\n\n How we care for you: \n • Financial Rewards: great compensation package, annual profit sharing, matching 401k and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts\n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program\n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages\n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs\n, • Collaborative and Welcoming Workplace: Inclusive culture rooted in our values, enhanced by Employee Resource Groups, and team-building activities.\n, • Additional site-specific benefits may be offered\n\n #LI-KL1 Salary Range Transparency: Buffalo, NY $38.00-$49.00 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Manufacturing Engineer Work Schedule: Onsite - Buffalo, NY Our team in Military Aircraft is looking for a Manufacturing Engineer/CNC Programmer to join them. You will report to the Manufacturing Engineering Technical Lead and will have an onsite work schedule in East Aurora, NY As a Manufacturing Engineer/CNC Programmer, you'll be at the forefront of both new product development and continuous improvement of existing manufacturing processes. You'll work hands-on with high precision parts, applying advanced CNC programming and machining knowledge to solve challenges and optimize performance. As a Manufacturing Engineer/CNC Programmer, you will: • Create detailed operation sheets and CNC programs to produce high-precision machined parts and sub-assemblies.\n, • Define manufacturing sequences, tooling, gauging, and machine requirements to streamline production.\n, • Work closely with engineering, quality, production, and vendors to resolve issues and enhance manufacturability.\n, • Be hands-on in the production environment, assisting with program prove-outs and troubleshooting.\n, • Recommend and implement process enhancements, tooling upgrades, and design modifications.\n, • Assist in estimating costs and timelines for new proposals and tooling development.\n To be considered for this role, typically you'll bring: • A Bachelor's degree in a technical field with 3+ years of relevant professional experience, or an Associate degree with 6+ years of relevant professional experience, or a High School Diploma/GED with 8+ years of proven professional experience\n, • 3+ CNC programming experience using CAD/CAM software.\n, • Strong knowledge of process engineering from raw material to finished product.\n, • Hands-on experience with machine setup and operation.\n, • Excellent communication and documentation skills to work effectively across departments.\n It'd be great if you also had: • A degree in Mechanical, Manufacturing, or Industrial Engineering\n, • Background in the aerospace industry\n, • Experience with machine automation integration\n, • Skills in inspection of machined parts\n, • Hands-on experience machining stainless steel, titanium, and aluminum\n, • Proficiency in CNC Programming using Siemens NX\n, • Knowledge of Lean Manufacturing principles; Lean Six Sigma certification is a plus\n How we care for you: • Financial Rewards: great compensation package, annual profit sharing, matching 401k and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts\n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance\n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages\n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs\n, • Collaborative and Welcoming Workplace: Inclusive culture rooted in our values, enhanced by Employee Resource Groups, and team-building activities.\n, • Additional site-specific benefits may be offered\n Salary Range Transparency: Buffalo, NY $70,000.00-$115,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Senior Manufacturing Engineer - 5-Axis Milling Reporting To: Leader, Mfg. Engineering Tech. Work Schedule: Onsite - Buffalo, NY Our Military Aircraft Group is seeking a Senior Manufacturing Engineer to join our Prismatic (Complex Milling) Manufacturing Group in East Aurora, NY. This is your opportunity to take on a high-impact role where innovation meets precision, and your expertise drives the development of cutting-edge aerospace components. As a Senior Manufacturing Engineer, you'll be at the forefront of both new product development and continuous improvement of existing manufacturing processes. You'll work hands-on with complex milled parts, applying advanced CNC programming and machining knowledge to solve challenges and optimize performance. As a Senior Manufacturing Engineer, you will: \n • Lead the development of manufacturing processes for new aerospace components.\n, • Drive Design for Manufacturing (DFM) initiatives across engineering teams.\n, • Create and prove out N/C programs, operation sequences, workholding design concepts, tooling/gauge lists, and detailed work instructions.\n, • Support and improve existing production processes through hands-on shop floor engagement.\n, • Estimate time standards, labor ratios, and economic run quantities for complex parts.\n, • Generate detailed cost estimates for new business and process improvements.\n, • Evaluate and implement new capital equipment and manufacturing technologies.\n, • Collaborate daily with engineers, technicians, operations staff, quality teams, and suppliers to resolve process issues and mentor peers.\n, • Lead projects and potentially own the engineering portion of a dedicated manufacturing cell.\n, • Support automated manufacturing cells to reduce labor and variability.\n\n To be considered for Senior Manufacturing Engineer, here's what you'll typically bring with you: \n • A Bachelor's degree in a technical field with 5+ years of relevant professional experience, or an Associate degree with 8+ years of relevant professional experience or a High School Diploma/GED with 10+ years of proven professional experience\n, • Strong knowledge and experience in 5-Axis CNC Milling programming using CAD/CAM (NX experience preferred, but not required)\n, • Proven experience in end-to-end process engineering-from raw material to finished product\n, • Hands-on machining experience, including setup and operation\n, • Expertise in machining a variety of materials (aluminum, titanium, stainless steel, etc.)\n, • Strong knowledge of cutting tools, workholding, and fixture design\n, • Excellent communication and documentation skills\n, • Project management experience\n, • Proficiency in Microsoft Office tools (Word, Excel, etc.)\n\n How we care for you: \n • \nFinancial Rewards: great compensation package, annual profit sharing, matching 401k and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts\n, • \nWork/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance\n, • \nHealth & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages\n, • \nProfessional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs\n, • \nCollaborative and Welcoming Workplace: Inclusive culture rooted in our values, enhanced by Employee Resource Groups, and team-building activities.\n, • Additional site-specific benefits may be offered\n\n Salary Range Transparency: Buffalo, NY $90,000.00-$145,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

At DuPont, our purpose is to empower the world with essential innovations to thrive. We work on things that matter. Whether it's providing clean water to more than a billion people on the planet, producing materials that are essential in everyday technology devices from smartphones to electric vehicles, or protecting workers around the world. Discover the many reasons the world's most talented people are choosing to work at DuPont. Why Join Us | DuPont Careers DuPont's Water & Protection is recruiting for an Industrial Electrician to join its dynamic team located at its manufacturing site in Buffalo, NY. Yerkes Buffalo is the North American manufacturing home of Corian® solid surface products, introduced in 1968 and the founding manufacturing location for Tedlar® polyvinyl fluoride (PVF) films, introduced in 1961. We are looking for people who have a passion for delivering innovative, sustainable solutions that meet our customer needs for a better, healthier, safer life. As an Industrial Electrician you will perform all phases of installation, maintenance, repair, and inspection of electrical and instrumentation systems. This position typically operates on a rotating schedule. This is a bargaining union opportunity; those selected may be expected to join the local union. RESPONSIBILITIES DESCRIPTION Your key responsibilities will be/what you'll do: \n • Repair, adjust, and install electrical equipment including but not limited to: programmable controllers and recorders, transmitters and transducers, motor control centers, power lift trucks, building lighting, heating, AC and ventilation equipment, electrical motors, complex electronic devices, control panels, relays, conduit and switches\n, • Troubleshoots and repairs complex problems: visually inspects diagnoses and observes electro-mechanical and pneumatic systems.\n, • Changes-out and repairs AC/DC electric motors and parts, relays, solenoids, and terminal strips\n, • Disassembles equipment to gain access to problem, using crane, hoists, hand tools, power tools, hammers, pry-bars, etc.; examines parts for defects, such as breakage or excessive wear\n, • Uses blueprints, diagrams, repair manuals, calipers, micrometers, scales, and other measuring instruments as required\n\n This position has a current starting rate on days of $38.06 and will increase to $41.87 once assigned to shifts. This position is part of a bargaining unit and shift schedules may change based on the bargaining agreement. JOB QUALIFICATIONS Requirements: \n • Minimum of a High School diploma, G.E.D. or equivalent and 2+ years of experience as an Electrician, Maintenance/Control Mechanic or similar in a manufacturing environment is required\n, • Able to understand and interpret the National Electric Code\n, • Able to troubleshoot and maintain 12V-480V system\n\n A successful candidate will be able to meet the physical requirements of the job with or without reasonable accommodation, including: \n • Willing and able to work a 24/7 rotating shift schedule including holidays and weekends as well as overtime, sometimes on short notice.\n, • Willing and able to lift up to 50 lbs.\n, • Willing and able to meet the physical demands of the position and perform work in confined areas and hard-to-reach conditions\n\n Please note that a minimum requirement for this U.S. based position is the ability to work legally in the United States; no visa sponsorship/support or relocation assistance is available for this position. Join our Talent Community to stay connected with us! DuPont is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information. DuPont offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Lathe Machinist II - 2nd Shift Reporting To: Leader, Performance Work Schedule: Onsite - Buffalo, NY Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Our team in Space & Defense Group is looking for a CNC Lathe Machinist II to join them. You will report to the department Performance Leader and will have an onsite work schedule in East Aurora, NY. To be considered for this role, here's what you'll need to bring with you: \n • High School diploma or GED preferred. Otherwise, demonstrated ability to understand and apply all verbal, written and computer work instructions or training in English, and demonstrated ability to perform simple addition, subtraction, multiplication and division.\n, • At least 3 years of experience as a CNC Lathe Machinist, working on Lathe machines with Mill capabilities.\n, • Demonstrated working knowledge of G-Code is preferred\n, • Knowledge of Fanuc controls a plus\n\n As a Lathe Machinist II, you will: \n • Work under minimum supervision and help in the planning of work and solving of problems within the cell.\n, • perform set-ups and run parts on a CNC lathe with milling capabilities to close tolerances, fine finishes, and complex geometry.\n, • Be responsible for the inspection of all work performed, setting up or adjusting gaging equipment, detecting unusual conditions, deviant parts; and when needed recognizing errors in blueprints and operation sheets.\n, • Interpret complex drawings, including GD&T blueprints, sketches and operation sheets\n\n How we care for you: • Financial Rewards: great compensation package, annual profit sharing, matching 401k and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts \n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance \n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages \n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs \n\n, • Collaborative and Welcoming Workplace: Inclusive culture rooted in our values, enhanced by Employee Resource Groups, and team-building activities.\n, • Additional site-specific benefits may be offered\n\n, • 2nd and 3rd shift employees receive 10% shift differential pay.\n Salary Range Transparency: Buffalo, NY $28.00-$32.00 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Delaware North's Patina Group is searching for full-time and part-time Cooks to join our team at Hencraft in Buffalo, New York. As a Cook, you will partake in important food preparation for guest orders and communicate with serving team members. Join our team of culinary professionals, where your creativity and expertise will shine as you craft unforgettable dishes that tantalize the taste buds of our esteemed guests. Apply now and be a part of our culinary excellence! $19.00 - $22.00 / hour Information on our comprehensive benefits package can be found at ___. We care about our team member’s personal and professional well-being. Delaware North provides a benefits package designed to give you the comfort, safety, and security you need to deliver exceptional experiences for our guests. All team members receive benefits including: • Weekly pay, • Training and development opportunities, • Employee discounts, • Follow the supervisor's assignments for food production and prepare food and beverage products for guests by following recipe guidelines, using proper preparation techniques, and sanitation guidelines, • Set up, operate, and clean kitchen equipment according to correct procedures, as well as keep workstations clean, organized, sanitized, and sufficiently stocked, • Work cooperatively with team members and management, • Followthe supervisor's assignments for opening and closing procedures, • Ability to read and understand recipes and food abbreviations, • Capable of working in a fast-paced environment with a high level of attention to detail, • Ability to work as a team player, follow procedures, and take directions, • Basic math skills, with the ability to calculate and follow recipe measurements, • No experience or diploma required, • Must be able to lift 20 lbs or more, • Ability to stand for long periods while also bending, lifting, and reaching, • Ability to move rapidly and coordinate multiple orders, • Exposed to variable temperatures Days Evenings M-F Weekends Patina Group is a leader in the premium segment of the restaurant and catering industry, operating restaurants and managing catering and food service operations at high-profile venues including, Lincoln Center, Walt Disney World®, Disneyland®, the Empire State Building, Grand Central Station, and The Metropolitan Opera. Patina Group was recently named one of America's Top 25 restaurant groups by Nation's Restaurant News. Our business is all about people, and that includes you. At Delaware North, you’re not just part of a team — you’re part of a global legacy: a family-owned company with 100+ years of history behind it. Our operations span the world, offering you unique paths to growth and success. Who says you can’t love where you work? With jobs in iconic sports arenas, stunning national parks, exciting casinos, and more, we pride ourselves on giving the world great times in great places. And whether you’re interested in restaurants, hotels, sports, gaming, operations, or retail, part-time or full-time, we’re invested in helping you achieve your career goals. Together, we’re shaping the future of hospitality — come grow with us! Delaware North, along with its subsidiaries, is an equal opportunity employer, showcasing job opportunities and considering applicants for all positions without regard to race, color, religion, sex, gender identity, national origin, age, disability, protected veteran status, sexual orientation, or any other legally protected status. $19.00 - $22.00 / hour

Delaware North's Patina Group is searching for full-time and part-time Cooks to join our team at Patina 250 in Buffalo, New York. As a Cook, you will partake in important food preparation for guest orders and communicate with serving team members. Join our team of culinary professionals, where your creativity and expertise will shine as you craft unforgettable dishes that tantalize the taste buds of our esteemed guests. Apply now and be a part of our culinary excellence! $18.00 - $22.00 / hour Information on our comprehensive benefits package can be found at ___. We care about our team member’s personal and professional well-being. Delaware North provides a benefits package designed to give you the comfort, safety, and security you need to deliver exceptional experiences for our guests. All team members receive benefits including: • Weekly pay, • Training and development opportunities, • Employee discounts, • Follow supervisor's assignments for food production and prepare food and beverage products for guests by following recipe guidelines, using proper preparation techniques, and sanitation guidelines, • Set up, operate and clean kitchen equipment, according to correct procedures as well as keeping workstations clean, organized, sanitized, and sufficiently stocked, • Work cooperatively with team members and management, • Follow supervisor's assignments for opening and closing procedures, • Ability to read and understand recipes and food abbreviations, • Capable of working in a fast-paced environment with a high level of attention to detail, • Ability to work as a team player, following procedures and taking directions, • Basic math skills, with the ability to calculate and follow recipe measurements, • No experience or diploma required, • Must be able to lift 20 lbs or more, • Ability to stand for long periods while also bending, lifting, and reaching, • Ability to move rapidly and coordinate multiple orders, • Exposed to variable temperatures Days Evenings Holidays Weekends 8hr shift OT as needed Patina 250 offers fresh, thoughtful, flavor-infused variations of the authentic tastes of Western New York. The restaurant, located in The Westin Buffalo, offers a refined, welcoming atmosphere to enjoy drinks, shared plates, or a full dining experience. Local artists’ work contributes to the modern mood with paintings, elaborate light fixtures, and sculptural wall installation. Our business is all about people, and that includes you. At Delaware North, you’re not just part of a team — you’re part of a global legacy: a family-owned company with 100+ years of history behind it. Our operations span the world, offering you unique paths to growth and success. Who says you can’t love where you work? With jobs in iconic sports arenas, stunning national parks, exciting casinos, and more, we pride ourselves on giving the world great times in great places. And whether you’re interested in restaurants, hotels, sports, gaming, operations, or retail, part-time or full-time, we’re invested in helping you achieve your career goals. Together, we’re shaping the future of hospitality — come grow with us! Delaware North, along with its subsidiaries, is an equal opportunity employer, showcasing job opportunities and considering applicants for all positions without regard to race, color, religion, sex, gender identity, national origin, age, disability, protected veteran status, sexual orientation, or any other legally protected status. $18.00 - $22.00 / hour