Oil change jobs in Dallas, TexasCreate job alerts

Job Description We are seeking a dependable and organized Class A truck driver who possesses a great deal of physical and mental stamina who thrives working long hours on the road and can consistently ensure safe and accurate deliveries. Must be detail-oriented, efficient, and have a clean driving record. Class A Truck Driver Duties and Responsibilities • Fully understand how to operate and safely drive your assigned delivery vehicle, • Drive trucks with a Gross Vehicle Weight (GVW) over 26,000 lbs., • Pull a towed weight exceeding 10,000 lbs., • Ensure trailer hitch is properly and securely attached to the tractor unit, • Transport goods, livestock, etc. from the place of origin to assigned destination, • Pick-up loads and organizes goods in an ordered, logical manner, • Ensure contents are properly secured inside of the truck to prevent breakage or damage, • Safely and efficiently handle and unload goods at selected destinations, • Obtain signatures or warehouse scans to confirm and complete deliveries with clients, • Assist in mapping delivery routes, • Stay on a predetermined route and ensure timely deliveries, • Communicate with dispatch as needed, • Confirm contents of each shipment load matches the manifest document, • Perform inspections of your vehicle prior to and following each trip, • Check weather conditions and road reports before departure, • Always ensure your vehicle is kept clean, • Maintain and service vehicle as needed (refuel, change oil, tire pressure, repairs, etc.), • Notify managers of any major maintenance or delivery issues encountered, • Follow delivery schedule and rest at appropriate times, • Maintain detailed driving and delivery logs, • Track and report working hours, • Adhere to company rules and regulations, • Obey all applicable traffic laws and drive according to the weather/road conditions, • Comply with ICC and DOT regulations, • Make safety a priority at all times Class A Truck Driver Requirements and Qualifications • High school diploma or GED equivalent preferred, • Valid Class A driver's license required, • 2+ years proven experience with tractor-trailer driving preferred, • Clean driving record with no moving violations, • Must pass a background check and drug test, • Skilled at driving large vehicles, • Comfortable maneuvering and parking a tractor-trailer, • Alert, focused, and detail-oriented, • Physically and mentally fit, • Ability to lift up to 50 lbs. at a time, • Able to operate an electric lift, hand trucks, pallet jacks, etc., • Proficient using GPS and other routing systems, • An innate sense of direction, • Disciplined, dependable, and resourceful, • High level of composure and good stress managementCompany DescriptionTNT is a family owed and based company that thrives solely on building a team to better the economic future and reform trucking. Our vision is to turn company drivers to owner operators. We are committed to safety first, balanced home time which is always promised but over looked. Must be very clear and transparent on English and speak and understand English. Also, stating must on ELD compliance and clean MVR. TNT has a zero tolerance of drugs and alcohol policy that will be implemented and enforced to FMSCA rules and guidelines. Pay is based on percentage and experience. After probationary period pay increase will be increased on percentage. Also, safety programs and DOT passed inspections will be paid to driver for each passed inspection, you will be paid for any extra CDL holdings you obtain while with us such as dubbles, tankers, hazmat, Twic card etc once you obtain them we pay you for getting it and your percentage will increase for those as well.TNT is a family owed and based company that thrives solely on building a team to better the economic future and reform trucking. Our vision is to turn company drivers to owner operators. We are committed to safety first, balanced home time which is always promised but over looked. Must be very clear and transparent on English and speak and understand English. Also, stating must on ELD compliance and clean MVR. TNT has a zero tolerance of drugs and alcohol policy that will be implemented and enforced to FMSCA rules and guidelines. Pay is based on percentage and experience. After probationary period pay increase will be increased on percentage. Also, safety programs and DOT passed inspections will be paid to driver for each passed inspection, you will be paid for any extra CDL holdings you obtain while with us such as dubbles, tankers, hazmat, Twic card etc once you obtain them we pay you for getting it and your percentage will increase for those as well.

$25.00/hourShift Premium may Apply Immediately hiring! Are you ready to grow your automotive repair career while working on a wide variety of newer vehicles across multiple brands? If you’re dependable, mechanically skilled, and take pride in doing quality work, join the Avis Budget Group team and play a key role in keeping our fleet safe, reliable, and customer-ready. In this role, your work directly supports vehicle performance and availability—helping ensure customers can get on the road with confidence. What You’ll Do: As an Automotive Mechanic (B Tech), you will perform essential mechanical repairs and maintenance on a diverse fleet of newer vehicles with minimal technical supervision. Your responsibilities may include oil and fluid services, tire repairs, brake work, suspension repairs, and other routine maintenance or warranty-related repairs based on your experience level. You may also support senior technicians with more complex diagnostic and repair work as you continue to build your skills. By maintaining vehicle reliability and safety, your work helps reduce downtime and ensures vehicles are ready when customers need them—directly contributing to a positive customer experience. Perks You’ll Get: • Bi-weekly hourly wage (New York and Puerto Rico: weekly wage), • On-the-job training to expand your automotive skills and support ASE certification growth, • Paid time off, • Medical, dental and other insurance, • Flexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expenses, • Retirement benefits (401k), • Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars • Above perks may vary based on full-time/part-time status and location What We’re Looking For: • Valid Driver’s License and good driving record, • Minimum of 2 years of professional auto repair experience or automotive coursework with certifications, • At least 1 ASE certification, with the ability to obtain 2 additional ASE certifications within the first year, • Working knowledge of ASE certification areas including, but not limited to: Engine Repair, Drivetrain/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance, and Light Vehicle/Diesel, • Comfortable working in a mechanical shop with moderate to loud noise levels, • Must have a complete set of tools required for automotive repair and maintenance, • Basic computer skills, including typing and data entry, • Must be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehicles, • Must be 18 years of age and legally authorized to work in the United States, • This position requires regular, on-site presence and cannot be performed remotely, • Previous Original Equipment Manufacturer (OEM) experience is preferred and considered a strong advantage Who We Are: Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions. We believe great service starts with people who care. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate. Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. Dallas Texas United States of America

About the Company: MCI is a 46-year-old industry leader in the design, manufacture, and assembly of electrical controls, electrical enclosures, irrigation pumps and controls, municipal and commercial pump stations, water purification systems and design-to-order metal fabrications. We serve a variety of industries with standard and custom products including water pumping, oil production-drill and refining controls, waste water treatment, conveying, baggage conveying, handling, and more! About the Role The Product Support Technician provides customer-facing technical support and parts support for MCI-manufactured products, with a primary focus on the Flowtronex division’s water pumping and purification equipment. This role supports customers, distributors, service centers, and field service technicians by troubleshooting equipment issues, preparing quotations, processing parts-related requests, and helping administer warranty claims. The position also serves as an important link between the field and internal teams by communicating product feedback to engineering and management to support continuous improvement. Responsibilities • Provide phone and email support to customers, service centers, distributors, field service technicians, and internal employees regarding service, parts, and equipment operating in the field., • Respond to technical assistance calls and support replacement-parts inquiries for MCI products., • Prepare written and verbal quotations for parts, accessories, and service-related needs., • Sell parts and accessories and help coordinate timely delivery to customers and service partners., • Support administration of warranty claims and document relevant service information., • Research historical files and equipment records to determine correct product configuration and operating requirements., • Communicate field issues, product concerns, and improvement opportunities to engineering and management., • Support MCI’s commitment to responsive customer service and high-quality aftermarket support. Qualifications • Strong customer service skills and a professional, service-oriented approach., • Strong mechanical aptitude and the ability to work through equipment-related issues logically., • Solid PC skills and the ability to document, research, and communicate information clearly., • Strong written and verbal communication skills with customers and internal departments. Preferred Skills • Experience with pumps, electrical controls, or similar industrial equipment., • Experience with PLC logic, variable frequency drives (VFDs), or related control systems., • Experience with replacement-parts sales, quotations, or aftermarket support., • Ability to interpret older records or equipment files to support troubleshooting and service decisions. Pay range and compensation package Medical, dental, and vision coverage, including free medical options! PTO and company holidays. Quarterly bonus program for all positions. 401(k) Health and dental insurance. Disclaimer The information contained herein is not intended to be an all-inclusive list of the duties and responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities required to do the job. Management may, at its discretion, assign or reassign duties and responsibilities to this job at any time. The duties and responsibilities in this job description may be subject to change at any time due to reasonable accommodation or other reasons. EEO Notice Motor Controls, Inc provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Motor Controls, Inc complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Interviews @ 4251 S Collins St, Arlington, TX 76018 on 03/24 & 3/25Fort Worth, TX 03-24-2026 From 11:00 AM to 5:00 PM 03-25-2026 From 8:00 AM to 11:00 AM Company Provided VEHICLE, FUEL, PHONE!! TECHNICIAN Handyman - Commercial – (General Carpentry, Electrical, Plumbing) JOB DESCRIPTION The Facility Maintenance Technician position is responsible for performing diversified duties to install, troubleshoot, repair, and maintain facilities according to safety, predictive, and productive maintenance systems and processes to support the achievement of the customer’s business goals and objectives. We are looking for candidates with excellent attitudes and someone who is willing to take care of the customer. We furnish a company vehicle, all fuel, vehicle maintenance, and a company Phone. We offer paid vacations, sick days, and paid holidays, and have voluntary plans in health insurance and ancillary insurance. If you are passionate about what you do and looking for a job then we want to talk to you. Essential Functions • Perform diversified duties to install and maintain facilities., • Provide emergency/unscheduled repairs to facilities and scheduled maintenance repairs of facilities., • Perform service repair duties and responsibilities., • Perform service skills including, but not limited to, carpentry, plumbing, electrical, troubleshooting, and repair of facilities., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on facilities., • Perform a variety of electrical, plumbing, carpentry maintenance functions., • Use a variety of hand and power tools, meters, and material handling equipment in performing duties., • Detect faulty operations, defective material and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas., • Be able to effectively communicate and use phones (phones company provided), • Must be able to use apps in phone (phones company provided), • Must be able to turn in all applicable paperwork for each work order (ie. before and after photos, signed and stamped work orders, etc.), • Must maintain regular work attendance habits / good work attendance habits., • Have availability for work., • Must be able to drive from service to service. (Company Provided Vehicles)., • Properly recording work time and complying with the Company's timekeeping procedures., • Technical Capacity., • Ethical Conduct., • Communication Proficiency., • Results Driven. Work is regularly performed in a combination of office, warehouse, outdoor, and shop environments and is regularly exposed to dust, odors, oil, fumes, and noise. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Position Type/Expected Hours of Work • This is a Reactive to Service Calls type job. There is On-Call Duty on scheduled rotations., • You must possess a strong background in at least two of the following skill sets:, • Plumbing, Electrical, Drywall Repairs, Painting, Flooring, Carpentry, Locks As an equal opportunity employer, ACS Commercial Services, L.L.C. does not discriminate in its employment decisions on the basis of race, religion, color, national origin, gender, sexual orientation, age, military status, disability, or on any other basis that would be in violation of any applicable federal, state, or local law. Furthermore, ACS Commercial Services, L.L.C. will make reasonable accommodations for qualified individuals with known disabilities unless doing so would result in an undue hardship, safety, and/or health risk. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Job Type: Full-time Company DescriptionACS is a Full-Service Facility Maintenance Commercial Services Company. We are not just another, maintenance company; we are the best in the industry and have the best retail clients in the industry.ACS is a Full-Service Facility Maintenance Commercial Services Company. We are not just another, maintenance company; we are the best in the industry and have the best retail clients in the industry.

Cleaver Brooks Sales and Service is looking for a Senior Boiler Controls Technician to join our team in Dallas, TX. The Senior Boiler Controls Technician is responsible for wiring, firing, and testing boilers in the shop & field. This position is responsible for the readiness of the customer equipment. Any salary estimation specified in this job board may or may not be aligned with our organization’s pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details! Job Location: Dallas, TX Signing Bonus Details: • Qualified Tech candidates with 1-5 years of relevant boiler experience will receive a $2500 signing bonus! ($1500 paid upon hire, and $1000 paid after 90 days), • Qualified Techs with +5 years of relevant boiler experience will receive a $5000 signing bonus! ($3000 paid upon hire, $2000 paid after 90 days) Essential functions: • Wire all controls and motors for watertube and firetube boilers and auxiliary equipment., • Rebuild control valves and regulators., • Build and test control panel using Engineering wiring schematic and layout., • Build and test fuel skids using Engineering wiring schematic and layout., • Build and test condensate tanks and deaerators., • Trim out firetube and watertube boilers., • Perform start-up of Rental boilers in field., • Assist departments as required., • Reads blueprints and wiring schematics., • Able to trouble shoot, fire, and set combustion on all types of boilers, including but not limited to boiler with superheaters, desuperheaters, and economizers., • Determines valve trim, regulator size and spring, oil gun length and size, and all other parts and accessories needed to fire any boiler., • Able to fire and set combustion on boiler with all types of pneumatic controls., • Able to fire and set combustion on boiler with all types of electrical controls., • Able to train other employee’s on the operation and controls of boilers., • Maintain condition of and inventory of all tools and monitors., • Apply intellect, creativity, adaptability, judgment, and management skills to achieve required results., • Ensure duties and company projects are accomplished in an efficient and cost effective manner., • Support peers and management with internal and external projects., • Adhere to company policies., • Other duties as assigned. Basic Requirements: Education: • Must possess a valid drivers license with a safe driving record, • Must be able to read and work from blueprints and schematics., • Must be able to follow written and verbal instructions., • Mechanical and electrical background a must., • Must have the ability and knowledge to trouble shoot systems without the appropriate schematic. Physical Skill & Effort: Requires stooping, climbing, bending, crawling, and lifting 50 pounds, working in confined and elevated areas, and prolonged standing. Working Conditions and Hazards: Some work in physical plant environment where plant orientation may be required and safety precautions are required. May encounter some unpleasant working conditions of brief duration. Little to no contact with hazardous conditions. Benefits of being a Cleaver-Brooks Sales & Service Employee: • Competitive salary, • Comprehensive benefits, including medical, dental, vision, maternity support program, discounted virtual physician visits, voluntary medical benefits (Critical Illness, Hospital Care, and Accidental Injury), FSA, HSA, life insurance, short term and long-term disability, • Cash matching 401(k) plan, • Employee assistance program (EAP), • Pet insurance, • Employee discount program, • Tuition assistance, • Paid time off and 11 paid holidays Who is Cleaver-Brooks Sales & Service: Cleaver-Brooks Sales and Service, Inc. (CBSS) is a market leader in providing fully integrated boiler and burner systems. CBSS offers a full range of capabilities from: new equipment, installation, rentals, retrofits, repairs, parts, and service. We can deliver, install, and upgrade boiler room solutions that improve efficiency, reduce cost, and optimize space. CBSS delivers the most efficient, reliable, safe, and environmentally sustainable solutions that differentiate us in the marketplace. We are a 24/7 customer driven operation. This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor. By applying to this job and providing your mobile number, you are agreeing to receive an initial text from Cleaver-Brooks, which you will have the ability to opt out of upon receipt. Message and data rates may apply. Message frequency varies.

Job Description Responsibilities • Applicant will be handling multiple tasks and therefore must be able to able to manage their time through organization and prioritized based on both urgency and importance of the task., • Engage with customers about and product-related questions. via email, phone, text, and chat., • Quote customers with current pricing and availability., • Process orders, blanket orders & release schedules in our ERP system. Analyze vendor pricing and purchasing data to identify cost-saving opportunities., • Process return material authorizations (RMA’s), • Analyze customer issues—including product, delivery, or application concerns—and determine appropriate resolutions or next steps., • Expedite customer’s orders., • Process Account Receivable, invoicing, and follow up on unpaid invoices., • Assist Territory Managers to meet customers’ needs., • Cooperate with other team members to meet customers’ needs, and work with management on special projects., • Provide administrative support (office supplies, cleaning services, and building maintenance), • Maintain continuity of work operations by running weekly inventory reports and following up on outstanding parts orders, purchase orders, quote requests and billing issues., • Coordinate with vendors and service providers for repairs, supplies, and equipment servicing., • Ability to research products and use analytical problem-solving skills to identify and resolve process issues, ensuring efficient workflow and continuous improvement., • Maintain and organize inventory of office supplies and equipment., • Ability to review products and services and understand their appropriate applications., • Inventory control, • Handle shipping and receiving when warehouse manager is not available, • 2-3 years of experience in a comparable role or a Bachelor's degree., • Ability to understand and work with products, parts, or systems where accuracy and mechanical reasoning are important., • Effectively communicate in writing, over the phone, in video meetings, by text and internet chat., • Enthusiasm and ability to work independently with minimal supervision., • Effective time management and task priority assignment., • Ability to solve mechanical problems, • Positive attitude and willingness to help others, • Proficient in P21’s ERP system, • Must be able to prioritize and/or change work assignments as needed to meet new established deadlines., • Able to analyze and evaluate information/situations and facilitate or recommend reasonable solutions. We provide the tools, resources, and training that enable you to take on many responsibilities and perform at your highest level. Working Conditions: Office Environment Onsite, 8808 Sovereign Row, Dallas, Texas. Travel: Limited for training Education: 2-3 years work experience in a similar industry or Bachelor's degree. Job Type: In office, Full-Time Work hours- 8-5 with hour for lunch Join our team. Solve problems. Move your career forward. Company DescriptionEstablished in 1954, Southwestern Controls' diverse market presence provides stability under the toughest economic conditions. As a designer and distributor of technical systems and components Southwestern Controls provides custom solutions in the healthcare, scientific, environmental, oil field and other growing industries. Our Technical Sales and Customer Service Representative team help customers develop new products or improve existing ones. Our Internet Marketing teams have 2 eCommerce sites, several brochure sites, and advertise on Google and YouTube. Together, we improve the world in ways our people are proud of.Established in 1954, Southwestern Controls' diverse market presence provides stability under the toughest economic conditions. As a designer and distributor of technical systems and components Southwestern Controls provides custom solutions in the healthcare, scientific, environmental, oil field and other growing industries. Our Technical Sales and Customer Service Representative team help customers develop new products or improve existing ones. Our Internet Marketing teams have 2 eCommerce sites, several brochure sites, and advertise on Google and YouTube. Together, we improve the world in ways our people are proud of.

Up to $15/hr with base pay and commissions! Some of our most successful lube technicians are those that joined the team with no experience at all, but many others were once servers, restaurant workers, mechanics, retail employees, landscapers, and other skilled trade workers!. Technicians, managers,

Job Description Cleaver Brooks Sales and Service is looking for a Senior Boiler Controls Technician to join our team in Dallas, TX. The Senior Boiler Controls Technician is responsible for wiring, firing, and testing boilers in the shop & field. This position is responsible for the readiness of the customer equipment. Any salary estimation specified in this job board may or may not be aligned with our organization’s pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details! Job Location: Dallas, TX Signing Bonus Details: • Qualified Tech candidates with 1-5 years of relevant boiler experience will receive a $2500 signing bonus! ($1500 paid upon hire, and $1000 paid after 90 days), • Wire all controls and motors for watertube and firetube boilers and auxiliary equipment., • Rebuild control valves and regulators., • Build and test control panel using Engineering wiring schematic and layout., • Build and test fuel skids using Engineering wiring schematic and layout., • Build and test condensate tanks and deaerators., • Trim out firetube and watertube boilers., • Perform start-up of Rental boilers in field., • Assist departments as required., • Reads blueprints and wiring schematics., • Able to trouble shoot, fire, and set combustion on all types of boilers, including but not limited to boiler with superheaters, desuperheaters, and economizers., • Determines valve trim, regulator size and spring, oil gun length and size, and all other parts and accessories needed to fire any boiler., • Able to fire and set combustion on boiler with all types of pneumatic controls., • Able to fire and set combustion on boiler with all types of electrical controls., • Able to train other employee’s on the operation and controls of boilers., • Maintain condition of and inventory of all tools and monitors., • Apply intellect, creativity, adaptability, judgment, and management skills to achieve required results., • Ensure duties and company projects are accomplished in an efficient and cost effective manner., • Support peers and management with internal and external projects., • Adhere to company policies. Education: • Must possess a valid drivers license with a safe driving record, • Must be able to read and work from blueprints and schematics., • Must be able to follow written and verbal instructions., • Mechanical and electrical background a must. Requires stooping, climbing, bending, crawling, and lifting 50 pounds, working in confined and elevated areas, and prolonged standing. Working Conditions and Hazards: Some work in physical plant environment where plant orientation may be required and safety precautions are required. May encounter some unpleasant working conditions of brief duration. Little to no contact with hazardous conditions. Benefits of being a Cleaver-Brooks Sales & Service Employee: • Competitive salary, • Comprehensive benefits, including medical, dental, vision, maternity support program, discounted virtual physician visits, voluntary medical benefits (Critical Illness, Hospital Care, and Accidental Injury), FSA, HSA, life insurance, short term and long-term disability, • Cash matching 401(k) plan, • Employee assistance program (EAP), • Pet insurance, • Employee discount program, • Tuition assistance Cleaver-Brooks Sales and Service, Inc. (CBSS) is a market leader in providing fully integrated boiler and burner systems. CBSS offers a full range of capabilities from: new equipment, installation, rentals, retrofits, repairs, parts, and service. We can deliver, install, and upgrade boiler room solutions that improve efficiency, reduce cost, and optimize space. CBSS delivers the most efficient, reliable, safe, and environmentally sustainable solutions that differentiate us in the marketplace. We are a 24/7 customer driven operation. This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper.

Job Description Maintenance Support Technician Location: Celebration Station - Mesquite, TX Position Type: Full Time Hourly Company Overview: Welcome to Five Star Parks & Attractions, where work is fun, growth is real, and every day makes an impact. Five Star isn’t just a rating or a name; we’re a team of people who love creating unforgettable moments. As a leader in the amusement and hospitality industry, Five Star Parks & Attractions brings energy to both indoor and outdoor family entertainment centers across the country. From the first smile at the front door to the last high-five of the day, we’re all about delivering experiences families, friends, and coworkers remember long after they leave. As the largest privately owned operator of family entertainment centers in the U.S., we offer more than a job, we offer a place to belong. Whether you’re starting your very first job, looking for a flexible role, or building a long-term career, there’s a spot for you here. Safety, trust, and a service mindset guide everything we do. We treat our guests like friends and our team members like family, creating a welcoming, inclusive environment where everyone’s contribution matters. We believe in empathy, teamwork, and opening doors to new possibilities, on the floor, behind the scenes, and beyond. If you’re service-minded, motivated, and ready to be part of something fun and meaningful, we’d love to meet you. Join Five Star Parks & Attractions and help us deliver safe, clean, unforgettable fun to the communities we serve every single day. Job Summary: Love fixing things? Like working with engines, tools, and equipment? Celebration Station is looking for a hands-on Maintenance Technician to help keep our go-karts, attractions, and facility running safely and smoothly. If you're mechanically inclined and enjoy solving problems, this is a great opportunity to build real technical skills while working in a fun environment. You don’t need to know everything on day one — we’ll train the right person who is reliable, motivated, and comfortable working with tools. What You'll Do • Perform preventive maintenance on go-karts and attractions., • Change oil, lubricate components, and complete safety inspections., • Troubleshoot mechanical issues and assist with repairs., • Work with hand tools and basic shop equipment., • Help maintain rides, games, and facility equipment., • Complete maintenance logs and safety checklists. What We're Looking For • Mechanically inclined and comfortable using tools., • Reliable with a strong work ethic., • Willing to learn and take direction., • Ability to troubleshoot and solve problems., • Small engine repair., • Lawn equipment or motorcycles., • Go-karts or recreational vehicles., • Standing, walking, bending, and lifting throughout the day., • 401(k) with company match., • Health, dental, and vision insurance., • Life insurance. You’ll get hands-on experience working on engines, mechanical systems, and attractions while building skills that transfer into trades like mechanical repair, maintenance, and facilities work. If you enjoy working with your hands and fixing equipment, this is a great place to grow. Five Star Park & Attractions is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factors. We actively promote diversity and inclusion within our workplace and encourage candidates of all backgrounds to apply. Notice of E-Verify Participation: Five Star Parks & Attractions participates in the E-Verify program. APPLY NOW!

Job DescriptionMaintenance Support Technician Location: Celebration Station – Greensboro, NC Position Type: Full-Time Hourly About Us Celebration Station is part of Five Star Parks & Attractions, a company that operates family entertainment centers across the country. Our parks are built around fun, but behind the scenes it takes a great maintenance team to keep everything running safely and smoothly. That’s where you come in. If you’re someone who enjoys fixing things, working with tools, and figuring out how machines work, this could be a great opportunity. Every day is different, and you’ll learn a wide range of skills working on attractions, go-karts, and facility equipment. What This Job Is All About This is a hands-on maintenance role focused on keeping our attractions, go-karts, and facility in great working condition. A big part of the job is preventive maintenance. That means oil changes, inspections, adjustments, and small repairs that keep equipment running safely and reliably. You don’t need to know everything on day one. We can train the right person. What matters most is that you are mechanically inclined, dependable, and willing to learn. If you’ve worked on things like lawn mowers, weed eaters, motorcycles, small engines, or basic mechanical repairs, that experience will help a lot. What You'll Be Doing • Perform preventive maintenance on go-karts and attractions, • Change oil, lubricate components, and complete safety inspections, • Troubleshoot mechanical issues and assist with repairs, • Work with hand tools and basic shop equipment, • Help maintain rides, games, and facility equipment, • Keep maintenance logs and inspection checklists up to date, • Maintain a clean and organized work area, • Mechanically inclined and comfortable using tools, • Experience working on small engines or basic mechanical equipment is a big plus, • Willingness to learn and take direction, • Reliable with a strong work ethic, • Ability to troubleshoot and solve problems, • Lawn equipment or small engines, • Motorcycles or kart engines, • 401(k) with company match, • Health, dental, and vision insurance, • Life insurance

Job Description Cleaver Brooks Sales and Service is looking for a Boiler Controls Technician – Mobile Steam Department to join our team in Dallas, TX. The Boiler Controls Technician will be responsible for wiring, firing, and testing boilers in the shop & field. This position is responsible for the readiness of the customer equipment. Any salary estimation specified in this job board may or may not be aligned with our organization’s pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details! Job Location: Dallas, TX Essential functions: • Wire all controls and motors for watertube and firetube boilers and auxiliary equipment., • Rebuild control valves and regulators., • Build and test control panel using Engineering wiring schematic and layout., • Build and test fuel skids using Engineering wiring schematic and layout., • Build and test condensate tanks and deaerators., • Trim out firetube and watertube boilers., • Perform start-up of Rental boilers in field., • Assist departments as required., • Reads blueprints and wiring schematics., • Able to trouble shoot, fire, and set combustion on all types of boilers, including but not limited to boiler with superheaters, desuperheaters, and economizers., • Determines valve trim, regulator size and spring, oil gun length and size, and all other parts and accessories needed to fire any boiler., • Able to fire and set combustion on boiler with all types of pneumatic controls., • Able to fire and set combustion on boiler with all types of electrical controls., • Able to train other employee’s on the operation and controls of boilers., • Maintain condition of and inventory of all tools and monitors., • Apply intellect, creativity, adaptability, judgment, and management skills to achieve required results., • Ensure duties and company projects are accomplished in an efficient and cost effective manner., • Support peers and management with internal and external projects., • Adhere to company policies. Education: • Must possess a valid drivers license with a safe driving record without restrictions, • Must be able to read and work from blueprints and schematics., • Must be able to follow written and verbal instructions., • Must have a broad knowledge of boiler controls., • Mechanical and electrical background a must., • Must have the ability to trouble shoot boilers and auxiliary equipment., • Must be able to retrofit control systems in the field. Working Conditions and Hazards: Some work in physical plant environment where plant orientation may be required and safety precautions are required. May encounter some unpleasant working conditions of brief duration. Little to no contact with hazardous conditions. Benefits of being a Cleaver-Brooks Sales & Service Employee: • Competitive salary, • Comprehensive benefits, including medical, dental, vision, maternity support program, discounted virtual physician visits, voluntary medical benefits (Critical Illness, Hospital Care, and Accidental Injury), FSA, HSA, life insurance, short term and long-term disability, • Cash matching 401(k) plan, • Employee assistance program (EAP), • Pet insurance, • Employee discount program, • Tuition assistance Cleaver-Brooks Sales and Service, Inc. (CBSS) is a market leader in providing fully integrated boiler and burner systems. CBSS offers a full range of capabilities from: new equipment, installation, rentals, retrofits, repairs, parts, and service. We can deliver, install, and upgrade boiler room solutions that improve efficiency, reduce cost, and optimize space. CBSS delivers the most efficient, reliable, safe, and environmentally sustainable solutions that differentiate us in the marketplace. We are a 24/7 customer driven operation. This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper. By applying for this job and providing your mobile number, you consent to receive an initial text message from a Cleaver Brooks Talent Team member. You will have the option to opt out upon receiving the message. Messages may include updates on your application, scheduling initial screenings or interviews, and similar communications. Standard message and data rates may apply, and message frequency may vary.

ALL ROADS LEAD TO THIS OPPORTUNITY The journey to Valvoline Instant Oil Change (VIOC) is different for everyone. Our employees are students, recent grads, parents, veterans, career changers—who have all found their way to our team. No matter where you’ve been or what you’re looking for, discover how your road leads to Valvoline. ROLE OVERVIEW: What you’ll do to drive success When you join us as an Entry-Level Lube Technician, your personal and professional goals will be fueled by a friendly and collaborative team environment. Together, we’ll help keep our guests safe on the road by providing top-tier customer service, while performing preventative maintenance services for their vehicles. Your road to VIOC doesn’t require previous automotive experience. Through our award-winning training program, we’ll teach you how to: Change oil Check and refill fluids Rotate tires Test and replace batteries Inspect and replace lights and wipers Perform an 18-point maintenance check And other preventive maintenance services BENEFITS: What you’ll gain to fuel your goals We’re committed to putting our people first in every way possible. That’s why we offer a variety of benefits* to help you navigate and advance a better future. Here’s a look at some of our unique benefits: Compensation: Compensation: $16.00 per hour weekly pay. Career Acceleration: Hands-on training for the potential to become a Service Center Manager within 18-24 months. Debt-Free Education: 13 paid credit hours/year at WilmU, covering part-time enrollment over two semesters. Life Balance: No late-night hours, holidays off, paid time-off availability, and back-up child and elder care. Health Benefits: Medical, dental, and vision, plus prescription drug coverage with Health Savings Account contributions. Employee Assistance Program (EAP): Quick, free, and confidential well-being support for all areas of life, including personal and work relationships, family, mental health, and legal issues. Employee Perks: Company-provided uniforms and tools, 50% discount on VIOC automotive services, and 401(k) savings plans with a 100% match up to 5%. QUALIFICATIONS: What you’ll need to keep moving forward From day one, you’ll get hands-on training and support to thrive as a Lube Technician. All you need to do is bring your positive attitude, attention to detail, and passion for learning—and we’ll help you every step of the way. We seek team members with: Schedule flexibility (Weekend availability is likely, but we ensure you don’t work late nights or holidays) An eagerness to learn, a friendly attitude, and a desire to be part of a customer-focused team English fluency in reading, writing, and speaking We expect you can: Stand for up to 8 hours, climb stairs, and occasionally lift up to 50 pounds Crouch, bend, twist, and work with your hands above your head Be comfortable working in a non-climate-controlled environment Wherever you are, wherever you’re going, your future starts here. Because given the opportunity and support, we know everyone has something different, meaningful, and exciting to contribute. This is your chance to join a supportive team that’s willing to go the extra mile to help you succeed in your own way. So, bring your story, bring your goals, bring yourself—bring what drives you. *Terms and conditions apply, and benefits may differ depending on location. Valvoline is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. The Company endeavors to make its recruitment process accessible to any and all users. Reasonable accommodations will be provided, upon request, to applicants with disabilities in order to facilitate equal opportunity throughout the recruitment and selection process. Please contact Human Resources at 1.833.VVV.Report or email to make a request for reasonable accommodation during any aspect of the recruitment and selection process. The contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications.

Join our vibrant team at Ramirez Family Restaurants, a locally owned-and-operated McDonald's franchise! We're on the lookout for motivated Crew Members who are eager to thrive in a supportive work environment! Are you searching for a fulfilling job with excellent benefits and opportunities for growth? Do you want a position that fits seamlessly into your busy schedule and encourages your personal development? Join us and become an integral part of our team! Working with enthusiasm and determination alongside teammates, focusing on exceptional customer service, and delivering delicious food and memorable moments... Does this resonate with you? You'll feel perfectly at home here! As a Maintenance Crew Member, your responsibilities will include: * Welcoming customers with a warm smile and building positive connections * Collaborating with fellow Crew Members and Managers to achieve shift targets and create an enjoyable work atmosphere * Ensuring a clean and inviting restaurant environment * Stocking items to ensure availability and readiness * Filtering oil fryers daily * Maintaining outside grounds * Clean equipment, inside and outside windows, stock rooms, and restrooms * Unload delivery truck 2 times a week * Take out and empty trash compactor * Change light bulbs * Clean HVAC/Exhaust units and roof of debris * Flexible Schedule - We value your time as much as you do! * Free Food - Who doesn't love hot and salty fries! * College Assistance - Invest in your future career! * Career Advancement - Explore leadership roles and paths to promotion! * Insurance - Available for both full-time and part-time employees * McDPerks - Our benefits and perks go above and beyond! This job posting provides a glimpse into the McDonald's restaurant experience, but there's much more to discover. Our team members tackle various tasks daily, contributing to our vibrant workplace culture. Join us at Ramirez Family Restaurants, where our commitment to your success is driven by family values. Come and see why we're more than just a workplace - we're a supportive community dedicated to helping YOU excel! Requsition ID: PDX_MC_F96E2D64-8644-46CF-9E61-A1614C950989_97486 McDonald's Corporation and McDonald's USA, LLC (the "Company") are committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee of the Company, including any corporate-owned restaurant, on the basis of age, sex, sexual orientation, race, color, creed, religion, ethnicity, national origin, alienage or citizenship, disability, marital status, veteran or military status, genetic information, or any other legally-recognized protected basis under federal, state or local laws, regulations or ordinances. Applicants with disabilities may be entitled to reasonable accommodation under the terms of the Americans with Disabilities Act and/or certain state or local laws. A reasonable accommodation is a change in the way things are normally done that will ensure an equal employment opportunity without imposing an undue hardship on the Company. Please contact if you need assistance completing any forms or to otherwise participate in the application process or to request or discuss an accommodation in connection with a job at the Company or at a McDonald's corporate-owned restaurant to which you are applying. McDonald's and its franchisees are taking proactive steps in response to the COVID-19 outbreak to ensure the safety in our restaurants across all communities. Our values of quality, service, and cleanliness continue to guide us. We're following direction from the CDC, state, and local governments and adhering to our deep cleaning procedures in every restaurant, every day. We also fully support employees who stay home from work if they are feeling sick. Read more about the ways we are prioritizing health at . McDonald's and its franchisees are always looking for top candidates and encourage you to apply online. If you have any questions, please first call the restaurant as this will help the restaurant comply with any social distancing guidelines or other compliance obligations. For corporate roles, please proceed to the online application, or if you already applied, contact @us.mcd.com. There may be a short delay in response time while we continue to monitor the impacts of COVID-19. We sincerely thank you for your continued trust in the Golden Arches. /

Are you a people person? Self-motivated? Do you love working with cars?. Must be able to maneuver in and out of a shallow 3' deep pit to position yourself safely under cars. Must be over 18 years of age (over 16 years of age in Arizona, Idaho, Kansas, New Mexico, South Carolina, South Dakota, Texas,

Are you a people person? Self-motivated? Do you love working with cars?. Must be able to maneuver in and out of a shallow 3 deep pit to position yourself safely under cars.

Job Description Now is a great time to join our growing company! The Millennium Group (TMG) is an award winning business process outsourcing firm focused on print, mail, document scanning, reception, and related office support services for Fortune 500 companies, professional service firms, and institutions of higher education. TMG is looking for highly motivated, enthusiastic team players interested in a career rather than just a job. With a team of over 1,500 nationwide associates, TMG is seeking an individual who can uniquely contribute to our 30+ years of success in the industry. Office Services Associate / Driver We are seeking a reliable and detail-oriented Office Services Associate / Driver to manage the delivery, pickup, and transportation of materials across various locations and departments. This role ensures the smooth operation of office services and contributes to overall organizational efficiency. Key Responsibilities Mailroom office location Responsibilities: • Handle all materials received in the Mail Center (receive, review, receipt, document, process, prepare, identify, separate, deliver, transport, etc.)., • Deliver, pickup, and transport materials within, between, to, and from various departments and buildings., • Vehicle maintenance tracking; Take vehicle for oil change, wash, inspection, tires, etc., • Inspect deliveries for suspicious or threatening items., • Pickup outbound boxes and packages from internal customer locations., • Ability to sort items into categories according to established methods., • Prepare items for processing, shipment or transportation., • Enter activity data in logs, maintain records. EOM volume reporting., • Ensure all safety procedures are followed at all times, including vehicle safety., • Prepare and process outbound courier shipments using computer or service provider's equipment (such as FedEx)., • Ability to cross train on other roles within department; responsible for carrying out other duties as appropriate due to staff absences or at the discretion of management., • Other duties as assigned by manager. Qualifications: • High School diploma or equivalent (GED)., • Minimum of 2-5 years Mail/Print services related experience preferred with knowledge of commonly used Office Services procedures., • 1-3 years' experience with Microsoft Office Software (Word, Excel, etc.)., • Excellent customer service skills; must possess a "can do" attitude., • Excellent communication skills both verbal and written., • Ability to effectively work individually or in a team environment., • Competency in performing multiple functional tasks., • Attention to detail., • Ability to handle mail or hand cart, as well as flatbed., • Must be able to lift up to 50 pounds. Job Posted by ApplicantPro

Job Description ABOUT US: Big Guy Properties, Big Guy Storage and Go Mini's is a full-service national development and management team with a passion to create and manage outstanding communities and businesses. Big Guy promises to offer professional services for all our residents and customers at the local level with an array of living and storage options to suit the entire community. We approach our acquisitions and management as an opportunity to improve neighborhoods, properties, and facilities that need a little extra something to make a difference in the lives of our residents and customers. We have an accessible management and corporate support staff with a full-service marketing team ready to make your life easier. SUMMARY As a Go Mini’s Business Development Assistant/Driver, you will be responsible for the successful and timely delivery of portable storage containers to various area business and residential customers (primarily within 60 mile radius). You will also have a chance to grow our business and outreach. This role will actively support the local Territory Manager in growing our presence! Full Time Opportunity: Monday - Friday: 8am - 5p (Flexibility is a must! Occasional overnight & outside standard hours may occur). Responsibilities • Business Development: Drive market expansion within the assigned territory through targeted marketing and sales outreach. Includes market penetration: sales meetings and sales calls when not making deliveries., • Driving: Using a 25ft company delivery truck to deliver storage containers to clients (average 60 mile round-trip), • Ensure safe delivery without damaging client property or the containers, • Update delivery system software on mobile device with proof of delivery, • Driver must obey all safety protocols, follow instructions, • Safe operation and control of the 4300 International box trucks/roll backs, • Loading and unloading the Go-Mini Portable containers both empty and full, • Maneuver trucks into loading zones, secure containers with tie downs and safety chains, • Perform basic maintenance i.e. refuel, oil change, fluids, minor repair etc., • Transport trucks to repair facility for scheduled maintenance and repairs, • Basic administrative functions associated with meeting customers and vendors., • General container maintenance and readiness for customer rental and auctions as needed. • Driving experience with 26ft trucks., • Clean motor vehicle driving record. Class A is a plus, • High school diploma or equivalent, • 1 year tow truck or flatbed driving experience strongly preferred., • Great verbal and written communication, • Ability to follow safety procedures and protocols, • Mechanical skills a plus, • Sales skills a plus, • Background check, motor vehicle record check, and drug screen required, • DOT Medical Card is required for all drivers. Must be able to perform the essential functions of the job with or without reasonable accommodation, and without posing a safety risk to the health of self or others. Compensation: $25/hour (Bonus Opportunities based on performance/sales) Early Wage Access: We are partnered with ZayZoon, an employee benefit that gives you instant access to a portion of your wages ahead of payday. All offers of employment are contingent upon passing a drug test and completing a background check EEO: CFM Management, Inc. is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, religion, sex, national origin, or any other protected class.

Job Description Staff-Up is seeking a Construction Equipment Mechanic for a large construction material business in Dallas, TX! NOTE: MUST HAVE CONSTRUCTION EQUIPMENT MAINTENANCE EXPERIENCE!! Pay: $34.00 per hour Job description: This position requires the level of knowledge, skills, and tools necessary to diagnose and repair all makes of medium & heavy-duty construction equipment. Some duties include removing, cleaning, repairing, reinstalling, and adjusting vehicle components, including engine components, fuel systems, and the like. Duties And Responsibilities: • Must have own tools!, • Inspect and repair construction equipment; such as Skid Steers, Excavators, Curb Saws., • Inspect and repair forklifts, tractors, and trailers, • Perform all required maintenance inspections and safety checks as required, • Help service customers with their equipment, • Troubleshoot and submit repair bids to Service Manager, • Perform required Preventive Maintenance (oil change, lube, filter changes, etc.), • Ability to read and understand schematics, • High School Diploma or GED, • Computer-assisted troubleshooting experience Job Type: Full-time Staff-Up, LLC participates in E-Verify

Our Irving, TX branch is seeking a Local Class B Truck Driver to pick up waste oil at customer locations such as garages, automotive dealerships, quick change oil companies, fleet maintenance facilities, bus companies, airports and rental car companies.

POSITION SUMMARY: The Environmental Services Field Technician I (Driver Non-CDL) performs operational functions relating to emergency response and hazardous and non-hazardous spill clean-up and Hazmat Decon work. PRINCIPLE RESPONSIBILITIES: * Daily work will involve confined space entry such as manholes, tank cleaning, oil spill cleanup, drum handling, decontamination, sweeping and shoveling, high pressure washing and various other remedial activities. * Operates light and heavy equipment relating to clean-up, including: roll-off truck, vacuum truck, box trucks, skid steer, forklift, pumps and pallet-jack * Responds to customer spills and emergencies during normal business hours and after hours. * Performs pre-trip and post-trip Department of Transportation inspections. * Maintains vehicle logs. * Performs general housekeeping, including maintenance of equipment and site. * Performs other related duties as assigned. PREFERRED QUALIFICATIONS: * Ability to use heavy and light equipment, such as forklift, and pallet-jack. Skilled using hand and shop tools, and instruments. Demonstrates accuracy, thoroughness and attention to detail. Must be able to prioritize, stay focused and handle multiple, diverse responsibilities. * Current 40-hour HAZWOPER Training. MINIMUM QUALIFICATIONS: * A valid driver's license * DOT Qualified or ability to become DOT Qualified (Non CDL) to drive vehicles between 10k - 26k pounds * Ability to pass 40-hour HAZWOPER training upon hire Rewarding Compensation and Benefits * Comprehensive medical benefits coverage, dental plans and vision coverage. * Health care and dependent care spending accounts. * Short- and long-term disability. * Life insurance and accidental death & dismemberment insurance. * Employee and Family Assistance Program (EAP). * Employee discount programs. * Retirement plan with a generous company match. * Employee Stock Purchase Plan (ESPP). * Paid Time Off (PTO) * Benefits: The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company. EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law. ABOUT THE COMPANY Republic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services. Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world. In 2023, Republic's total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills. Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer. Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it. * Safe : We protect the livelihoods of our colleagues and communities. * Committed to Serve : We go above and beyond to exceed our customers' expectations. * Environmentally Responsible: We take action to improve our environment. * Driven : We deliver results in the right way. * Human-Centered: We respect the dignity and unique potential of every person. We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGY Republic Services' strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers' multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation. With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers. Recycling and Waste We continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers' specific needs. Environmental Solutions Our comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need. SUSTAINABILITY INNOVATION Republic's recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth. The Republic Services Polymer Center is the nation's first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America. We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028. RECENT RECOGNITION * Barron's 100 Most Sustainable Companies * CDP Discloser * Dow Jones Sustainability Indices * Ethisphere's World's Most Ethical Companies * Fortune World's Most Admired Companies * Great Place to Work * Sustainability Yearbook S&P Global

Take 5 Oil Change is your neighborhood go-to oil change spot. With our Pit Tech to President growth path, Take 5 is where you can invest in yourself while we invest in you. If so, here is good news for you! Take 5 Oil Change is offering an opportunity to showcase your skills and join our growing tea

Old Dominion Freight Line is seeking a dedicated Line Haul Driver to join our OD Family Culture. As a Line Haul Driver, you will operate various tractor-trailer combinations over long distances, playing a key role in delivering our customers' freight with precision and reliability. Our drivers typically work a 5-day workweek and are home most nights, offering a strong work-life balance. With an average annual pay of $107,000, this position also includes a Tuition Reimbursement Program for recent trucking school graduates. If you're a safety-focused driver with a commitment to excellence and enjoy a dynamic work environment, we invite you to apply and become a vital part of our OD Family. Line Haul Drivers operate various tractor-trailer combinations over long distances between customer service centers and customer facilities or work sites outside of the service center's geographic area. They sort, handle, load, and/or unload freight at company and customer locations. Primary Responsibilities • Operate vehicle safely within DOT regulations that govern safe driving, hours of service, inspection, maintenance, and transportation of hazardous materials., • Meet or exceed the medical standards of the U.S. Dept. of Transportation and satisfactorily pass a drug test and alcohol test., • Perform pre-trip inspections of vehicles before beginning trip. Ensuring that products loaded onto trailer are stable and will not shift during transit and delivery. As needed, the driver will be responsible for adjusting load securement and load distribution on the truck., • Operates tablets/phones to record information regarding deliveries and to begin navigation., • Unsecure freight for delivery and unloads freight at drop-off location with a hand truck., • Available for around the clock shifts to accommodate freight movements and must be able to be away from home for extended periods of time., • Must be able to read, write and speak English, • Must have 12 months previous tractor trailer driving experience and/or be a graduate of a State Certified and Licensed truck driving school, acceptable to Old Dominion and/or have satisfactorily completed the Old Dominion truck driver training program (ODTDT 8/88), • Must have the ability to read, write speak English, and perform simple mathematical calculations with mental ability to handle receipts, read maps, road signs, maintain logs, etc., • Must have the ability to properly operate hand held mini-computer when required., • Must have knowledge of DOT regulations governing safe driving, hours of service, inspection and maintenance, and extended periods, of time., • Must possess a valid commercial driver's license with hazmat, doubles, and tanker endorsements., • Must have working knowledge of vehicle safety and control systems., • Must be available for around-the-clock trips to accommodate freight movements and must be able to be away from home for extended periods of time., • Must meet or exceed the medical standards of the US Department of Transportation., • Must satisfactorily pass a drug test., • Must satisfactorily pass an alcohol test (if applicable), • (Sitting) Must be able to sit and remain alert while driving for an aggregate period of up to 11 hours., • (Standing/Walking) Must be able to stand and walk on surfaces such as concrete, pavement, wood and metal and sometimes on slippery and wet surfaces., • (Bending/Stooping/Kneeling) Must be able to perform occasional squatting to handle, position and secure freight. Must be able to perform occasional crouching and kneeling to handle, position and secure freight, and conduct pre-trip inspections of trucks., • (Climbing) Must be able to enter and exit the vehicle's cab 8 to 10 times a day. Cab floor level is generally 36 to 66 inches above ground level, with entry and exit achieved with the assistance of various configurations of steps and hand holds; also requires occasional bending, twisting, climbing, squatting, crouching, and balancing., • (Moving Materials) Must be able to perform frequent pushing of freight weighing up to 500 pounds on a dolly or cart as well as occasional pushing of freight weighing more than 300 pounds with or without a mechanical aid. Must be able to perform frequent pulling of freight weighing up to 500 pounds on a dolly or cart as well as occasional pulling of freight weighing more than 300 pounds with or without a mechanical aid. Must be able to frequently perform carrying freight weighing 1 pound to 100 pounds of varying size and shape a distance of at least 1 foot but usually no more than 100 feet. Must be able to load and unload full trailers of freight weighing as much as 50,000 pounds. This could involve moving 100-pound containers to and from floor level to carts, stacks, conveyors or platforms, over four feet high, balancing 300 pound drums on their rims and rolling them into position or stowing cartons or other merchandise overhead that weigh as much as 100 pounds each. This type of activity could precede or follow as much as 11 hours of driving., • (Reaching) Must be able to frequently reach for freight at waist level and occasionally reach for freight above shoulder height or below waist level. Must be able to occasionally reach above shoulder level, at waist level and below waist level for maneuvering and directing the controls to operate the truck., • (Other) Must be able to install and remove tire chains when required due to inclement weather., • Must be able to use right, left or both hands to get in and out of truck, wrapping and unwrapping shrink wrap, securing and unsecuring pallets, using pallet jack or hand truck, using the steering wheel, buttons on lift gates, etc., • Must be able to shift manual transmission and operate foot pedals., • Must be able to grip with right, left or both hands to use handles to get in and out of the truck, holding tablet, using pallet jacks or hand trucks, holding the steering wheel, securing straps, cardboard, airbags, etc., • Must be able to pinch fingers on the right, left or both hands to shrink wrap, secure and unsecure straps, utilize clip boards, utilize tablets, etc., • Must be able to hook/unhook various commercial vehicle combinations, manually lower and raise landing gear, operate the fifth wheel release lever, lock and release pintle-hooks, attach and release safety chains, open and close cargo doors, climb into and out of vehicles, fuel vehicles and check engine oil and coolant levels., • Must be able to use cognitive skills for:, • paying attention to surroundings, including traffic, truck inspections, freight, gates, etc., • long-term and short-term memory for inspecting areas, breaking down pallets, carrying products, driving in traffic and for safety, • logic and reasoning in reading manifests, tablets, navigation, road signs, reading boxes and order numbers, • Auditory and visual processing to inspect trucks, driving, reading, listening for horns and/or other traffic and speaking with customers, • Must be able to read, write and speak English. The work environment described below represents those that an employee would encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions of the job. While performing the duties of the job, the employees will be exposed to various work environments which may include working with or around others while loading and unloading, working in an enclosed vehicle while driving, loading and unloading in an enclosed trailer, exposure to all weather conditions, noise levels that vary from quiet to loud and with lighting conditions that could be extremely bright or low light. This list of duties and responsibilities is not intended to be all inclusive and may be expanded to include other duties or responsibilities that management may deem necessary from time to time. Working Days: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday Working Shift: AM / PM Work Days and Shift are estimates and are subject to change, at any given time, based on job scheduling and/or business levels. Any information listed regarding Days and Shifts shall be considered a guideline of expectations for the specific position at the time of posting. Join the OD Family Today! As a Full Time

Take 5 Oil Change is your neighborhood go-to oil change spot. Drain motor oil, change oil filter. We've been doing this for over 35 years now and we pride ourselves in our friendly technicians, our oil change expertise, and our efficient process that gets you on your way safely and swiftly.

Take 5 Oil Change is your neighborhood go-to oil change spot. Drain motor oil, change oil filter. We've been doing this for over 35 years now and we pride ourselves in our friendly technicians, our oil change expertise, and our efficient process that gets you on your way safely and swiftly.

Job DescriptionSalary: $28.00-$30.00 hourly Weekly Pay w/ Benefits Offered Shift Available : Monday - Friday Responsibilities • Service vehicles according to established preventive maintenance schedule., • Rotate and balance tires, change oil and filters, lubricate vehicle parts, inspect and replace hoses, belts, mirrors, lamps, and maintain all fluid levels., • Use diagnostic equipment to evaluate mechanical problems in vehicles., • Maintain accurate and updated records of preventive maintenance., • Operate tools, equipment, and machinery according to prescribed safety procedures., • Correct unsafe conditions in work area and report any conditions that are not correctable to supervisor immediately., • Maintain accurate records of time and materials required to perform repairs and services., • Diagnoses mechanical problems of vehicles., • Promotes high standards of safety and acceptable housekeeping methods in all working areas., • Performs mechanical duties such as a general mechanics functions and recognition and repair of all safety equipment., • Operate engine hoist and forklift as required., • Strong communication and interpersonal skills. Qualifications • Accredited High School Diploma or equivalent required., • Minimum three (3) years auto/truck maintenance and repair experience., • Possess a current Texas Class “A” or “B” Commercial Driver’s License, with “P” and “S” endorsements., • Must be able to drive a vehicle with airbrakes., • Knowledge of school bus/automotive mechanical components., • Ability to work shifts as needed., • Ability to use time wisely to ensure proficient and effective operations., • Minimum of four (4) ASE Automotive Certifications (Automotive A1-A-8 or Medium/Heavy, • Duty Truck T1-T6, or School Bus S1-S7) or obtain ASE certifications within 18 months of 18 months of employment, or TASBT Texas Association of School bus Technicians equivalent., • Possess and maintain airbrakes certification., • Ability to diagnose, troubleshoot and effectively perform repairs for all vehicles. This will, • include removal/replacement of engines, fuel systems, electrical, and diagnose transmissions (RR)., • Knowledge of Service Maxx, Diamond Logic builder, Cummins In-site, Mercedes, Detroit,, • and Alison doc programs., • After treatment systems including EGR Valves EGR Coolers, SCR, DPF. DOC and Injector Diagnostics., • Turbo Chargers-Cylinder Cutout test-Leak down test-High Pressure pump test-ICP & IPR., • Ability to diagnose minor mechanical problems and perform repairs without supervision., • Ability to operate tools and equipment involved in vehicle repair., • Ability to lift heavy equipment and vehicle parts., • Ability to pass alcohol and drug test., • Ability to pass required bus driver safety training., • Acceptable driving record. NC4WAUNRnc

Job DescriptionFLEET TECHNICIAN BASIC FUNCTIONS: Temporary April-June 30, 2026 Service vehicles according to established preventive maintenance schedule. Rotate and balance tires, change oil and filters, lubricate vehicle parts, inspect and replace hoses, belts, mirrors, lamps, and maintain all fluid levels. Use diagnostic equipment to evaluate mechanical problems in vehicles. Maintain accurate and updated records of preventive maintenance. Operate tools, equipment, and machinery according to prescribed safety procedures. Correct unsafe conditions in work area and report any conditions that are not correctable to supervisor immediately. Maintain accurate records of time and materials required to perform repairs and services. Diagnoses mechanical problems of vehicles. Promotes high standards of safety and acceptable housekeeping methods in all working areas. Performs mechanical duties such as a general mechanics functions and recognition and repair of all safety equipment. Operate engine hoist and forklift as required. Strong communication and interpersonal skills. QUALIFICATIONS: Accredited High School Diploma or equivalent (U.S.A. equivalency) required. Minimum three (3) years auto/truck maintenance and repair experience. Possess a current Texas Class A or B Commercial Drivers License, with P and S endorsements. Must be able to drive a vehicle with airbrakes. Knowledge of school bus/automotive mechanical components. Ability to work shifts as needed. Ability to use time wisely to ensure proficient and effective operations. Minimum of four (4) ASE Automotive Certifications (Automotive A1-A-8 or Medium/Heavy Duty Truck T1-T6, or School Bus S1-S7) or obtain ASE certifications within 18 months of 18 months of employment, or TASBT Texas Association of School bus Technicians equivalent. Possess and maintain airbrakes certification. Ability to diagnose, troubleshoot and effectively perform repairs for all vehicles. This will include removal/replacement of engines, fuel systems, electrical, and diagnose transmissions (RR). Knowledge of Service Maxx, Diamond Logic builder, Cummins In-site, Mercedes, Detroit, and Alison doc programs. After treatment systems including EGR Valves EGR Coolers, SCR, DPF. DOC and Injector Diagnostics. Turbo Chargers-Cylinder Cutout test-Leak down test-High Pressure pump test-ICP & IPR. Ability to diagnose minor mechanical problems and perform repairs without supervision. Ability to operate tools and equipment involved in vehicle repair. Ability to lift heavy equipment and vehicle parts. Ability to pass alcohol and drug test. Ability to pass required bus driver safety training. Acceptable driving record. Ability to operate a school bus.

Job Description Hybrid: Travel: 20% Join the Maverick Power Team! At Maverick Power, we don’t just build power distribution solutions—we redefine industry standards. Recognized on the 2025 Inc. 5000 list as #16 in the U.S., #2 in Manufacturing, and #1 in Texas, we are committed to driving innovation, quality, and speed. With multiple manufacturing facilities across North Texas and Phoenix, we are expanding rapidly and looking for top talent to grow with us If you are ready to be part of a high-energy, solutions-driven team where your work makes an impact, Maverick Power is the place for you. What We Offer: • Competitive Salary + Bonus Potential!, • Paid Time Off, 401K Matching, Medical, Dental, and Vision Benefits!, • High-growth organization with advancement opportunities! The Electrical Engineer designs and integrates electrical power distribution systems for modular solutions serving mission-critical data centers and industrial markets (oil & gas, renewables/BESS, mining, and utility). You will take ownership of electrical scope on projects of moderate to high complexity, coordinating interfaces across switchgear/switchboards, transformers, protection, ATS, UPS systems, batteries, grounding, and auxiliary systems. This role partners closely with mechanical, controls, manufacturing, and field teams to deliver safe, code-compliant, manufacturable modular systems. Key Responsibilities: • Develop one-lines, three-lines (as required), and overall power architectures for modular E-Houses and skids (MV and LV)., • Size and specify major equipment (switchgear/switchboards, transformers, bus duct/busway interfaces, breakers, fuses, metering, power quality components)., • Perform equipment sizing studies and calculations as applicable (load summaries, short circuit, protective device coordination inputs, arc-flash data inputs, voltage drop where required)., • Define grounding and bonding strategy, including interfaces to skid/baseframe and site grounding systems., • Specify and integrate ATS and UPS systems including bypass/maintenance arrangements, redundancy philosophies (N, N+1, 2N), and operational modes., • Coordinate electrical interfaces for battery systems supporting UPS and/or energy storage (DC distribution, battery cabinets/racks, disconnects, monitoring, and safety interfaces)., • Define interlocks and control interfaces (alarms, permissives, trips, emergency power off) in coordination with controls/protection teams., • Develop schematics and wiring concepts for auxiliary power, controls power, lighting, receptacles, and panelboards within the module., • Coordinate with mechanical/fire systems for power and signal interfaces (HVAC units, dampers, detection/suppression releasing panels, ventilation shutdowns)., • Support compliance activities as required (UL/NRTL, customer standards, IEC interfaces when applicable) and coordinate with suppliers on documentation., • Produce and/or review electrical drawing packages (one-lines, schematics, layouts, interconnect diagrams, cable schedules) and support BOM development., • B.S. in Electrical Engineering (or equivalent)., • Minimum of 4 years of experience designing industrial or mission-critical power distribution systems (data center experience strongly preferred)., • Hands-on experience with one-line creation and electrical system integration across switchgear/switchboards, protection, and controls interfaces., • Working knowledge of U.S. electrical codes/standards relevant to the work (e.g., NEC/NFPA 70, NFPA 70E; familiarity with IEEE/NEMA/UL practices as applicable)., • Experience with MV equipment (e.g., 5kV-35kV class) and/or packaged substations and E-Houses., • Experience with UPS topologies, maintenance bypass schemes, and data center redundancy design., • Familiarity with protective relay selection/settings coordination workflows and metering/SCADA integration., • Experience supporting UL/NRTL listings or major customer compliance programs for modular power equipment., • Must be able to lift up to 50 pounds at a time. EEO/AAP Statement We acknowledge and honor the fundamental value and dignity of all individuals. Maverick Power is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking a Support Specialist – Horizon VDI for our client in the Oil and Gas domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Contract position, and the client is looking for someone to start immediately. Duration: 6 Months Contract Location: Dallas, TX Salary: $60.00-$65.00/Hourly Role: Support Specialist – Horizon VDI Primary Skills: JavaScript Role Description: The Support Specialist – Horizon VDI must have 4+ years of experience. For this role, you must be a dedicated and customer-focused Support Specialist to join the team. You will serve as the primary technical resource for supporting and maintaining the VMware Horizon VDI platform across all levels of the support model (Level 1 to Level 3).This role will involve resolving end-user VDI issues, maintaining golden images, deploying new desktop pools, and working with application teams to ensure seamless virtual desktop functionality. As the ideal candidate, you will work closely with the infrastructure, security, and application teams to ensure optimal performance, usability, and security of the company’s virtual desktop environment. Key Responsibilities: • Provide Level 1–3 support for Horizon VDI user issues, including session performance, access, printing, and profile-related incidents, • Create, maintain, and update golden images for various user groups, including application packaging, patching, and configuration, • Validate and troubleshoot application functionality within VDI sessions in partnership with application owners, • Create and manage desktop pools in Horizon Administrator/Console, including both persistent and non-persistent configurations, • Perform root cause analysis for recurring issues and implement permanent fixes, • Maintain user entitlement mappings and access to appropriate VDI pools, • Monitor health system and generate reports on performance, usage, and capacity, • Test and implement updates, patches, and version upgrades to Horizon components and base images, • Collaborate with the Infrastructure team on escalations related to networking, storage, or host-level issues, • Document standard operating procedures, troubleshooting steps, and FAQs for internal knowledgebase, • Coordinate UAT testing for new images or configurations with business stakeholders, • Participate in change management and implementation planning for VDI-related initiatives, • Support onboarding and training for new users accessing the VDI environment Education: • Associate or Bachelor's degree in Computer Science, Information Technology, or a related field., • Preferred Certification(s): VMware Certified Professional – Desktop and Mobility (VCP-DTM). Required Experience: • 2+ years in IT support roles with at least 1 year supporting VDI environments, • Experience supporting VMware Horizon View (7.x or 8.x), including Connection Server, Composer, and Agent, • Experience with Windows desktop OS (Windows 10/11), Active Directory, and group policies, • Proficiency with tools like Horizon Administrator/Console, vSphere Client, and basic PowerShell scripting Preferred Experience: • 3+ years supporting end-user computing or VDI in enterprise environments, • Deep experience creating and maintaining golden images including app installs, optimizations, and Windows updates, • Familiarity with application packaging and troubleshooting app behavior in virtual environments, • Experience deploying and managing desktop pools, including automated, linked clone, or instant clone pools, • Working knowledge of FSLogix, profile redirection, and user data management, • Experience integrating VDI with multi-factor authentication, antivirus, and DLP tools, • Familiarity with Jira or similar ticketing and ITSM platforms, • Experience collaborating with infrastructure teams on networking, DNS, storage, and security configurations for VDI, • Knowledge of monitoring tools (e.g., Horizon Help Desk Tool, vRealize Operations, ControlUp), • Certifications such as VMware VCP-DTM, ITIL Foundation, or CompTIA A+ are highly desirable Skills and Competencies: • Strong analytical and problem-solving skills., • Excellent communication and interpersonal abilities., • Ability to work independently and as part of a team., • Customer-oriented mindset with a focus on delivering high-quality support., • Adaptability to evolve technologies and processes. Education:Associate or Bachelor's degree in Computer Science, Information Technology, or a related field. Experience: Minimum 4+ years of experience Relocation: This position will not cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Anshuman Garg Recruiter Phone: 484-331-9558 Benefits: We have various coverages and additional benefits to choose from: • Medical, Dental (Including Ortho) & Vision Insurance (Option to Enroll)., • Paid Leaves (Wherever applicable)., • Life & Disability Coverage (Upon eligibility)., • 401K Option, Education Assistance Program and more. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. #LI-AG1 #Mastech1

Job Description Hybrid: Travel: 20% Join the Maverick Power Team! At Maverick Power, we don’t just build power distribution solutions—we redefine industry standards. Recognized on the 2025 Inc. 5000 list as #16 in the U.S., #2 in Manufacturing, and #1 in Texas, we are committed to driving innovation, quality, and speed. With multiple manufacturing facilities across North Texas and Phoenix, we are expanding rapidly and looking for top talent to grow with us If you are ready to be part of a high-energy, solutions-driven team where your work makes an impact, Maverick Power is the place for you. What We Offer: • Competitive Salary + Bonus Potential!, • Paid Time Off, 401K Matching, Medical, Dental, and Vision Benefits!, • High-growth organization with advancement opportunities! The Product Manager - Standard Products owns strategy and execution for a portfolio of repeatable, catalog-based LV/MV power distribution components. You will drive growth through roadmap planning, competitive positioning, pricing, and lifecycle management - balancing customer needs, channel dynamics, and factory realities. This role requires experience across low and medium voltage, and an understanding of market segment requirements across commercial, industrial, oil & gas, data centers, and renewables. Key Responsibilities: • Define multi-year roadmap for standard products (new introductions, refreshes, cost-down, and end-of-life plans)., • Lead voice-of-customer (VOC) with distributors/partners, OEM customers, end users, EPCs, and internal application engineering., • Develop segment-based positioning and value propositions (e.g., uptime for data centers, ruggedization for industrial, compliance and space constraints for commercial)., • Own pricing strategy (list, discount guidance, value-based pricing) and gross margin targets; improve price realization., • Build business cases (TAM/SAM, demand forecasts, investment ROI, profitability, and mix assumptions)., • Partner with operations to drive VA/VE, component standardization, alternate sourcing, and manufacturability improvements., • Collaborate with supply chain on constraints, dual sourcing, and lifecycle/obsolescence management., • Monitor warranty/returns and field feedback; prioritize sustaining actions with engineering and quality; maintain disciplined change control., • Ensure product master data integrity in ERP/PLM (BOMs, lead times, attributes, and documentation)., • Minimum of 5 years in product management/product line management in electrical power distribution within an EOEM/manufacturing environment., • Exposure to both LV and MV products and how they are applied, specified, and sold., • Understanding of multiple segments: commercial, industrial, oil & gas, data centers, renewables., • Demonstrated capability in roadmap ownership, pricing/margin management, and cross-functional leadership., • Bachelor's degree in Electrical Engineering or related field; MBA a plus., • Familiarity with relevant standards/certification frameworks (UL/IEC/IEEE/NEMA as applicable)., • Experience selling through channel partners and managing catalog/stock programs. EEO/AAP Statement We acknowledge and honor the fundamental value and dignity of all individuals. Maverick Power is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Responsibilities Ready for a career change or just starting out? A role as a Rush Technician is a dynamic and fulfilling next step! Rush Truck Centers is the largest network of commercial vehicle dealerships across the US. Whether you're a recent graduate eager to kickstart your career or an experienced & certified Diesel Technician seeking a new path, we are looking to welcome you to our team! With more than 200 locations and nearly 8,000 dedicated employees, Rush Enterprises operates Rush Truck Centers—the largest network of commercial vehicle dealerships in North America—committed to delivering exceptional customer service, personalized support, and comprehensive solutions tailored to every fleet’s needs. This role is open for our AM/PM shift Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Competitive starting salary, • Shift Premiums-In dealerships with multiple shifts, • Career stability, • Opportunity for growth, • Continued training on a variety of OEM equipment, • Advanced vehicle maintenance technology, • Performance Evaluation: From 120days to Every 6 month Basic Qualifications: • High school diploma or general education degree (GED), • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Valid driver license (CDL a plus!), • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Motor Coach Industries (“MCI”) is North America’s public and private market motor coach leader, offering the all-time best-selling luxury motor coaches and workhorse commuter coaches, and brand new zero-emission luxury, high- and low-floor commuter coaches, designed on MCI's legendary J Series and D Series platforms. MCI is a subsidiary of NFI Group, a leader in propulsion agnostic bus and coach mobility solutions, and operates two world-class, award-winning coach manufacturing facilities and seven service centers. Building on over 90 years of experience manufacturing motorcoaches, MCI actively supports more than 30,000 vehicles across North America, with nearly half of all motor coaches in service in the United States and Canada built by MCI. POSITION GOAL: The Mechanic Position performs advanced diagnostic, repair, and maintenance tasks on complex mechanical, electrical, and pneumatic systems, ensuring optimal vehicle performance and safety. This role requires the ability to execute intricate maintenance and repairs with minimal supervision, delivering high-quality results. We are hiring multiple Mechanics across a range of skill levels WHY JOIN US: • Be a part of a team leading the world’s electrification of mass mobility, • Competitive Wages and comprehensive benefit package with Immediate benefit eligibility, • Paid holidays and vacation, • 401K with generous company match, • Passionate about creating a better product, a better workplace, and a better world, • Inclusive workplace culture that values and empowers team members., • On-the-job training in a continuous learning environment (we invested $15.9 million in 2024), • Advancement opportunities within our family of companies Engine Diagnosis and Repair including: • Heating and Air Conditioning Systems: Perform routine maintenance and basic repairs to maintain system functionality., • Electrical Components: Resolve issues in alternators, generators, and voltage regulators to ensure electrical systems remain operational., • Diagnose and repair electrical systems, such as gauges, interior and exterior lights, and electric motors, addressing minor electrical issues for proper system function., • Perform routine lubrication tasks, including engine oil/filter changes, air filter replacements, and chassis lubrication, ensuring vehicle reliability., • Change transmission fluid and filters, check differential fluid, and replace tires, maintaining optimal vehicle performance., • Assist in glass installations and perform basic body repairs, ensuring high-quality workmanship and structural integrity WHAT YOU NEED TO BE SUCCESSFUL: • 5-10 years of experience in automotive, diesel, or related fields, with preferred knowledge of engine, driveline, and electrical systems, • Commercial Driver’s License (CDL) with Air and Passenger endorsements is preferred but not required., • High-Voltage (HV) Safety Certification and HV Maintenance/Repair Training are highly desired for work on hybrid and electric vehicles., • Diagnostic Tools: Utilize systems like Vansco, Cummins INSITE, and other diagnostic tools to assess and troubleshoot mechanical and electrical issues, ensuring accurate and efficient diagnoses., • Precision Tools: Employ equipment such as hydraulic presses, pullers, manometers, tachometers, decelerometers, and VOA instruments to perform intricate maintenance and repair tasks with high accuracy., • Measurement and Calibration Tools: Use dial indicators, micrometers, reamers, and hones to fine-tune components and ensure precise measurements during repair and calibration processes., • Pumps and Testing Equipment: Apply vacuum and compression pumps to test engine performance, identify issues, and ensure engines meet operational standards., • Fleet & Data Management Software: Operate platforms like Oracle and Fleetio to track maintenance activities, input work orders, and manage fleet data, ensuring streamlined operations and up-to-date records., • Strength and Endurance:, • Ability to lift and carry objects weighing up to 50 pounds regularly and occasionally up to 75 pounds with assistance., • Perform repetitive tasks, including bending, kneeling, and crouching, throughout the workday., • Mobility and Dexterity:, • Must have the physical ability to climb ladders, work on elevated surfaces, and access tight or confined spaces to service vehicles., • Proficiency in using hands and arms to handle tools, manipulate small components, and operate equipment with precision., • Standing and Movement:, • Must be able to stand, walk, and work on concrete surfaces for extended periods of time (up to 8+ hours)., • Visual and Hearing Acuity:, • Adequate visual ability to read diagnostic screens, inspect parts for defects, and identify color-coded wires and components., • Hearing capability to detect unusual vehicle noises, alarms, or other diagnostic indicators., • Environmental Factors:, • Work may be performed in varying conditions, including exposure to loud noises, vibrations, dust, fumes, and temperature fluctuations., • Comfortable wearing required Personal Protective Equipment (PPE), such as safety glasses, gloves, and steel-toed boots, for extended periods.

Job Description Responsibilities Ready for a career change or just starting out? A role as a Rush Technician is a dynamic and fulfilling next step! Rush Truck Centers is the largest network of commercial vehicle dealerships across the US. Whether you're a recent graduate eager to kickstart your career or an experienced & certified Diesel Technician seeking a new path, we are looking to welcome you to our team! With more than 200 locations and nearly 8,000 dedicated employees, Rush Enterprises operates Rush Truck Centers—the largest network of commercial vehicle dealerships in North America—committed to delivering exceptional customer service, personalized support, and comprehensive solutions tailored to every fleet’s needs. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Competitive starting salary, • Shift Premiums-In dealerships with multiple shifts, • Career stability, • Opportunity for growth, • Continued training on a variety of OEM equipment, • Advanced vehicle maintenance technology, • Performance Evaluation: From 120days to Every 6 month Basic Qualifications: * High school diploma or general education degree (GED) * Minimum of 4 years’ experience as a Class 7 & 8 Diesel Technician in a dealership or related truck service facility * Proven experience diagnosing, repairing, and maintaining diesel engines, heavy-duty trucks, and refrigeration (reefer) units * Knowledge of electrical, HVAC, and mechanical systems related to transport refrigeration equipment * Valid driver’s license required (CDL preferred) * Certifications with Peterbilt, International, Hino, Isuzu, Cummins, reefer manufacturers (Thermo King, Carrier), and/or ASE certifications are preferred and rewarded Benefits: • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Responsibilities A Diesel Service Technician is responsible for providing service to our customers while maintaining exceptional customer service. This can include: cleaning, maintenance, visual inspection, and removal of parts and attachments. Installation with the help of proper manuals, report writing, disassembly, assembly, parts reuse evaluation, and reconditioning. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Develop and maintain positive relationships with customers to increase overall customer satisfaction. Benefits: We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED), • 7 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Motor Coach Industries (“MCI”) is North America’s public and private market motor coach leader, offering the all-time best-selling luxury motor coaches and workhorse commuter coaches, and brand new zero-emission luxury, high- and low-floor commuter coaches, designed on MCI's legendary J Series and D Series platforms. MCI is a subsidiary of NFI Group, a leader in propulsion agnostic bus and coach mobility solutions, and operates two world-class, award-winning coach manufacturing facilities and seven service centers. Building on over 90 years of experience manufacturing motorcoaches, MCI actively supports more than 30,000 vehicles across North America, with nearly half of all motor coaches in service in the United States and Canada built by MCI. POSITION GOAL: The Mechanic II Position performs advanced diagnostic, repair, and maintenance tasks on complex mechanical, electrical, and pneumatic systems, ensuring optimal vehicle performance and safety. This role requires the ability to execute intricate maintenance and repairs with minimal supervision, delivering high-quality results. We are hiring multiple Mechanics across a range of skill levels WHY JOIN US: • Be a part of a team leading the world’s electrification of mass mobility, • Competitive Wages and comprehensive benefit package with Immediate benefit eligibility, • Paid holidays and vacation, • 401K with generous company match, • Passionate about creating a better product, a better workplace, and a better world, • Inclusive workplace culture that values and empowers team members., • On-the-job training in a continuous learning environment (we invested $15.9 million in 2024), • Advancement opportunities within our family of companies Engine Diagnosis and Repair including: • Heating and Air Conditioning Systems: Perform routine maintenance and basic repairs to maintain system functionality., • Electrical Components: Resolve issues in alternators, generators, and voltage regulators to ensure electrical systems remain operational., • Diagnose and repair electrical systems, such as gauges, interior and exterior lights, and electric motors, addressing minor electrical issues for proper system function., • Perform routine lubrication tasks, including engine oil/filter changes, air filter replacements, and chassis lubrication, ensuring vehicle reliability., • Change transmission fluid and filters, check differential fluid, and replace tires, maintaining optimal vehicle performance., • Assist in glass installations and perform basic body repairs, ensuring high-quality workmanship and structural integrity WHAT YOU NEED TO BE SUCCESSFUL: • 5-10 years of experience in automotive, diesel, or related fields, with preferred knowledge of engine, driveline, and electrical systems, • Commercial Driver’s License (CDL) with Air and Passenger endorsements is preferred but not required., • High-Voltage (HV) Safety Certification and HV Maintenance/Repair Training are highly desired for work on hybrid and electric vehicles., • Diagnostic Tools: Utilize systems like Vansco, Cummins INSITE, and other diagnostic tools to assess and troubleshoot mechanical and electrical issues, ensuring accurate and efficient diagnoses., • Precision Tools: Employ equipment such as hydraulic presses, pullers, manometers, tachometers, decelerometers, and VOA instruments to perform intricate maintenance and repair tasks with high accuracy., • Measurement and Calibration Tools: Use dial indicators, micrometers, reamers, and hones to fine-tune components and ensure precise measurements during repair and calibration processes., • Pumps and Testing Equipment: Apply vacuum and compression pumps to test engine performance, identify issues, and ensure engines meet operational standards., • Fleet & Data Management Software: Operate platforms like Oracle and Fleetio to track maintenance activities, input work orders, and manage fleet data, ensuring streamlined operations and up-to-date records., • Strength and Endurance:, • Ability to lift and carry objects weighing up to 50 pounds regularly and occasionally up to 75 pounds with assistance., • Perform repetitive tasks, including bending, kneeling, and crouching, throughout the workday., • Mobility and Dexterity:, • Must have the physical ability to climb ladders, work on elevated surfaces, and access tight or confined spaces to service vehicles., • Proficiency in using hands and arms to handle tools, manipulate small components, and operate equipment with precision., • Standing and Movement:, • Must be able to stand, walk, and work on concrete surfaces for extended periods of time (up to 8+ hours)., • Visual and Hearing Acuity:, • Adequate visual ability to read diagnostic screens, inspect parts for defects, and identify color-coded wires and components., • Hearing capability to detect unusual vehicle noises, alarms, or other diagnostic indicators., • Environmental Factors:, • Work may be performed in varying conditions, including exposure to loud noises, vibrations, dust, fumes, and temperature fluctuations., • Comfortable wearing required Personal Protective Equipment (PPE), such as safety glasses, gloves, and steel-toed boots, for extended periods.

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. We currently operate in 40+ locations across 11 states, and we have over 1,600 team members. • Bruckner’s is more than just a place selling parts and working on trucks, • We are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it, • We contribute to our local communities, • We care about our people OUR CORE VALUES, • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER, • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace SERVICE LEASING POSITION SUMMARY, • Fuel and Wash Trucks including detailing inside., • Check in and out Rental/ Lease Units, • Complete Mobile Maintenance on all equipment (3.0), • Drain Oil and Refill, • Change Filters (ALL) If needed, • Grease all Fittings, • Check all Tires (32’s and tire pressures), • Gauge all Brakes, • Adjust brakes if needed, • Check and adjust 5th Wheel, • Check all fluids in trans and rear axles, • Check Wiper Blades, • Complete Alignments (All Axles), • Check and Replace all Lights if needed., • Heater and A/C check., • Belt inspections and replacement if needed., • Change Airlines and Electrical Cords. If needed., • Complete all necessary paperwork and work orders. Make sure all related parts are charged out on correct work order., • Maintaining current inventory on mobile unit., • Keep mobile unit clean inside and out., • Repair and locate air leaks., • Be able to use diagnostic software. Troubleshoot codes., • Change starter and Alternators, • Change Brakes, • Change Wheel Seals, • Pinion Seals, • Water Pumps, • Def Pumps, • Emission related components, • ABS System, • Troubleshoot Electrical issues, • Driveline and U-Joints repairs, • Any and all Exhaust related issues, • Repair or Replace all components on hydraulics Systems., • 75 % TDP completed. PREFERRED REQUIREMENTS REQUIREMENT • 3-5 Years of Experience, • CDL, • State Inspector License, • Service Call Experience Want to know more about our family-owned company, Proud that our 1600+ employees view us as the employer of choice! YouTube - Leasing Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic R Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: We are seeking a Senior Propulsion Design Engineer to support the development and delivery of propulsion hardware for the X-BAT platform, a next-generation UAV powered by a low-bypass turbofan engine. This role spans the full lifecycle of propulsion system components - from early layout and design through production release, test support, and flight operations. You will be a key contributor to turning propulsion architecture into manufacturable, testable, and flight-ready hardware across the engine, fuel, oil, and bleed air systems. This role is hands-on, detail-oriented, and highly cross-functional - requiring close collaboration with propulsion REs, technicians, machinists, production, controls, airframe, and flight test teams. What you will do in this role: • Own the design and release of propulsion hardware supporting the engine, fuel, oil, and bleed air systems., • Develop and maintain CAD models, drawings, and assemblies using Siemens NX with proper GD&T., • Translate propulsion architecture and requirements into hardware that is manufacturable, testable, and robust in flight., • Work directly with the machine shop, production, and technicians to support builds, resolve non-conformances, and drive iterative improvements., • Support test campaigns by providing hardware design support, instrumentation accommodation, and rapid iteration based on test findings., • Apply engineering judgment and analysis (e.g., hand calcs, ANSYS, FEA, GFSSP, REFPROP) to support sizing, load cases, and design validation., • Support configuration management, BOM control, and change processes using Teamcenter or equivalent PLM., • Participate in design reviews, interface control efforts, and root cause investigations related to propulsion hardware.Required qualifications:, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related engineering discipline., • 5+ years of experience in aerospace hardware design, preferably supporting propulsion systems., • Proficiency in CAD modeling and drawing creation (NX preferred) with sound application of GD&T., • Experience working directly with production, technicians, and machine shops to resolve real-world build issues., • Understanding of design for manufacturing, including machining limitations, tolerance stack-ups, and assembly workflows., • Some hands-on experience developing assembly guidance and supporting hardware builds and test integration., • U.S. Citizenship or ability to comply with ITAR requirements.Preferred qualifications:, • Experience with jet propulsion systems on UAVs or tactical aircraft., • Familiarity with GFSSP, REFPROP, ANSYS, or FEA to support design trade studies and validation., • Ability to write Python scripts for design automation, analysis, or data processing., • Experience with interface control, fastener selection for high-vibration environments, and high-temperature materials., • Experience designing hardware in test-driven development environments with rapid iteration cycles. Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Responsibilities Ready for a career change or just starting out? A role as a Rush Technician is a dynamic and fulfilling next step! Rush Truck Centers is the largest network of commercial vehicle dealerships across the US. Whether you're a recent graduate eager to kickstart your career or an experienced & certified Diesel Technician seeking a new path, we are looking to welcome you to our team! With more than 200 locations and nearly 8,000 dedicated employees, Rush Enterprises operates Rush Truck Centers—the largest network of commercial vehicle dealerships in North America—committed to delivering exceptional customer service, personalized support, and comprehensive solutions tailored to every fleet’s needs. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Competitive starting salary, • Shift Premiums-In dealerships with multiple shifts, • Career stability, • Opportunity for growth, • Continued training on a variety of OEM equipment, • Advanced vehicle maintenance technology, • Performance Evaluation: From 120days to Every 6 month Basic Qualifications: • High school diploma or general education degree (GED), • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Valid driver license (CDL a plus!), • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job DescriptionCompany Description MSX has been a trusted partner to leading vehicle manufacturers, their retailers, and mobility organizations globally for more than 30 years. Our unwavering commitment is to help our clients transform their businesses and effectively manage operations in the areas of: Sales Performance; Repair Optimization and Compliance; Parts and Accessories Sales Performance; and Consumer Engagement. With our global teams, industry expertise, and the power of technology, we design and deliver tailored, sustainable, and innovative solutions and services that help our clients optimize their operations and captivate their customers. Job Description Are you a high-energy leader who thrives on creating change? We are looking for a passionate individual to lead our Mobile Service program. This is not a traditional automotive role. You are a consultant, a sales coach, and a hands-on trainer rolled into one. You will be responsible for working with dealership owners to embrace the future of automotive service, coaching their management teams on profitability, and getting "hands-on" in our mobile units to show technicians how it’s done. If you have a passion for customer experience, consultative sales, or retail leadership, and you aren’t afraid to get your hands dirty, we want you. • 50% Business Growth & Sales: Consulting with Dealer Principals and Service Managers. You are "selling" the vision, overcoming objections, and building a profitable business model., • 25% Change Management: Implementing new processes, analyzing KPIs, and fixing "broken" dealership processes., • Serve as SME for Mobile Service implementation, sales, operations & workflow process mapping., • Deliver technical & non-technical training at dealerships, other venues within the assigned territory, and virtually. Training topics include new MS unit launch support, MS unit discovery, MS unit systems training, vehicle service & repair procedures, MS demand generation, inspection-based sales & customer satisfaction initiatives., • Instruct Technicians on proper vehicle lifting procedures, oil extraction/oil change procedure & vehicle checkup process, • Support and/or conduct other non-technical training., • Teach techniques for building rapport with customers, active listening, and conducting professional, high-integrity sales training to improve customer experience & increase MS department revenue., • Assist dealership management with the development and execution of dealership go to market plans., • Observe dealership process activity and provide root cause analysis/action planning/training to improve performance with proven ROI strategies., • Monitor all KPIs for all dealerships within the territory and provide counsel to dealership management in support of achieving stated sales targets., • Ensure robust parts stocking strategy to support MS operations., • Develop MS unit parts stocking plan to support planned repair as well as additional needed service opportunities., • Effectively observe and demonstrate Mobile Service procedures, requiring prolonged standing, walking, bending, crouching, kneeling, and crawling under vehicles or reaching into engine bays., • Conduct van discovery training, consisting of frequently moving parts, tools, and equipment often weighing 10-50 lbs., • Work in outdoor environments with varied temperatures & inclement weather alongside technicians., • Ability to travel 80% of the time (both driving and flying)Qualifications, • Passionate, resilient, and persuasive. Ability to talk to every level at the dealership and share best practices, • High School diploma (bachelor’s degree preferred), • Bachelor’s Degree, • 5+ years of experience in automotive industry. Service in an aftermarket or dealership environment is a plus. Retail automotive experience is a plus., • Must have a wide-ranging background in automotive industry with corporate and retail knowledge., • Knowledge of automotive service tools & equipment, • Ability to train Technicians on Mobile Service tools & equipment, • Understanding basic automotive systems to effectively communicate to technicians and Coordinators., • Knowledge of Automotive Service Sales Process & Techniques, • Ability to deliver sales training to MS Coordinators & Advisors, • Must have rich experience in automotive training and facilitation., • Knowledge of automotive parts operations, • Must have excellent written and verbal communication skills., • Proven record of accomplishment with program leadership., • Strong communication skills, both oral and written, • Strong analytical skills, • Strong problem-solving skills, • Exceptional collaboration and persuasion skills, • Strong initiative and motivation Additional Information

Job DescriptionDescription: $$MONEY$$ - BENEFITS - GROWTH - FAMILY CULTURE Now that we got your attention, why work for Integrity? Our people fuel the engine. We're relentlessly passionate about their success. To grow and build a company you are proud to call HOME! Integrity Fleet Services is a new and upcoming company built on a strong belief of help others, do what’s right and as the name implies integrity. By these key values we have developed strong long-lasting relationships in the fleet service industry not only with our customers but with each and every team member. Integrity Fleet Services is growing fast and looking for dependable and experienced Road Service Diesel and Trailer Technicians. Responsibilities • Perform a wide range of fleet repairs and preventative maintenances, including oil changes, filter replacements, and lubrication., • Diagnose and repair systems such as ABS, braking, hydraulic, light engine, pneumatic, and other related systems., • Utilize diagnostic software to assist with troubleshooting and efficient repair processes., • Accurately document work time, service reports, and equipment status to ensure precise billing and record-keeping., • Operate a service truck to reach various customer locations, ensuring a professional presence and communication with customers., • Responsible for decision-making surrounding vehicle diagnostics and repairs., • Conduct self in a professional manner. From the necessary (various health and wellness benefit options) to the nice-to-haves (we're talking EPIC snack bar friends), no matter what you are looking for, we have something just for you! · Health insurance · Retirement plan · Dental insurance · Vision insurance · Paid Holidays · Paid Vacation · annnd MUCH MUCH More!!! Our people: We have outdoor people, indoor people, mountain bikers, road bikers, runners, walkers (not the zombie kind), video game heroes, movie buffs, musicians, dancers, and every other variety of people. We have family people, single people, happy people. You will find a friend here and like we said, bring your friends too. Our advice: Don't ignore this opportunity. Of course, you may be happy now. But shouldn't you always be happier? Come in- Check us out. Worst case scenario, you will find out all the things we said are true (which you will). If you are a perfect fit, and join our team, FANTASTIC! If not, you made some new friends. Don't be afraid of change! One more thing: Share this! Don't be scared of friends or co-workers stealing this awesome job. If you are amazing and awesome, we will find a place for you too! Like we said, we are growing our team and have multiple positions open! Requirements: Qualifications • 2 years of experience performing repairs on trucks and trailers, including mechanical, electrical, brake, and suspension systems, with hands-on use of diagnostic software and tools for troubleshooting., • Strong mechanical skills with proficiency in the repair and service of truck and trailer systems and components; experience with advanced diagnostics is preferred but not required., • Must possess a valid driver’s license and a clean driving record., • Strong verbal and documentation skills, with the ability to work well with others and maintain professional relationships at all levels., • Must own basic tools required for the job., • Vocational or technical certifications are highly valued; ASE certification is advantageous., • Ability to work flexible schedules., • Must be able to lift, push, pull, and move up to 70 pounds and be capable of climbing, kneeling, twisting, and bending in a variety of work environments., • Welding experience a plus., • Full Time, • Approximately 40–45 hours per week, with additional hours as needed based on workload and customer demand. WE ARE A 24/7 ROAD SERVICE – FLEET MAINTENANCE COMPANY. SCHEDULE MUST BE FLEXIBLE. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time.

Job DescriptionDescription: POSITION: DRIVER/VALET FLSA STATUS: NON-EXEMPT EMPLOYMENT TYPE: Part-Time Job Summary: We are looking for a skilled and experienced Valet/Driver to join our team at Bay 9 Holdings LLC dba Edgemere located in Dallas, Texas. The Valet/Driver is responsible for safely transporting residents and or guest on trips from and to the community. Primary responsibility will be to assist with parking and retrieving vehicles at the community. Compensation & Benefits: This is a part-time, weekends only, hourly position with a salary of $15.50+ per hour. In addition, Bay 9 Holdings LLC dba Edgemere offers competitive medical, dental, vision, and life insurance benefits, generous PTO and holiday vacation time, 401K and stock options. ESSENTIAL JOB FUNCTIONS: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions: • Drive residents safely to scheduled destinations. Track assigned pick-ups and drop offs to ensure timely service., • Provide for high level of resident engagement., • Maintain cleanliness of bus and automobiles. Report needs for vehicle maintenance, such as oil changes, fluid levels, belts, batteries, etc., • Comply with applicable federal, state, and local laws, rules, and regulations; maintains knowledge of and follows all company policies and procedures., • Maintain regular and punctual attendance at work and meetings. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the team member for this job. Duties, responsibilities, and activities may change at any time with or without notice. • During emergencies or natural disasters may be required to be on duty for the duration of the disaster.Requirements:, • High school diploma or equivalent, • Valid class B commercial driver’s license with passenger endorsement KNOWLEDGE, SKILLS AND ABILITIES REQUIRED: • One year experience driving for seniors is preferred., • Must have a clean driving record (no violations) and possess safe, courteous driving habits, • Ability to read, write and speak English sufficient to perform job duties and to interact and communicate with residents, vendors and team members., • Knowledge of traffic and highway safety rules and regulations, and of the precautions necessary to avoid accidents., • Ability to operate a bus and vehicles in a safe and economical manner., • Ability to understand and carry out instructions and to perform work requiring good physical condition., • Ability to complete various forms and records, including updated route sheets, time sheets, field trip forms, incident, and accident reports, etc., • Must have mechanical aptitude with automobiles., • Must have excellent hospitality skills in working with customers. ENVIRONMENTAL AND PHYSICAL ACTIVITY REQUIREMENTS: The daily responsibilities of this position constantly require effective talking, hearing, sitting, walking, and standing functions. The position often involves light work, exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. Must be able to read print and computer-based materials and to do so with consistent accuracy. Most of these functions require light physical exertion and are conducted in a temperature-controlled environment with occasional exposure to hot and cold temperature. May be exposed to communicable diseases, blood borne pathogens, cleaning chemicals, dust, odors, and a variety of different pets. INTELLECTUAL/EMOTIONAL REQUIREMENTS: The occupant of this position must be able to perform the responsibilities of the position well under pressure. The position requires adaptability to performing a variety of duties, often changing from one task to another without loss of efficiency or composure. This position requires the ability to deal with and find resolution to problems and maintain a productive working relationship with team members and may be interrupted frequently to meet the needs and requests of others. It also requires adaptability to fluctuate between priorities daily while being responsive to needs as they arise. OSHA Category Classification: Category III: Tasks that involve no exposure to blood, body fluids, or tissues, and Category I tasks are not a condition of employment. The normal work routine involves no exposure to blood, body fluids, or tissues, although situations can be imagined or hypothesized under which anyone, anywhere, might encounter potential exposure to body fluids.

Job Description Staff-Up is seeking a Construction Equipment Mechanic for a large construction material business in Dallas, TX! NOTE: MUST HAVE CONSTRUCTION EQUIPMENT MAINTENANCE EXPERIENCE!! Job description: This position requires the level of knowledge, skills, and tools necessary to diagnose and repair all makes of medium & heavy-duty construction equipment. Some duties include removing, cleaning, repairing, reinstalling, and adjusting vehicle components, including engine components, fuel systems, and the like. Duties And Responsibilities: • Inspect and repair construction equipment such as Skid Steers, Excavators, Curb Saws., • Must have own tools!, • Inspect and repair forklifts, tractors, and trailers, • Perform all required maintenance inspections and safety checks as required, • Help service customers with their equipment, • Troubleshoot and submit repair bids to Service Manager, • Ability to read and understand schematics, • High School Diploma or GED, • Computer-assisted troubleshooting experience, • Construction Equipment and vehicle maintenance, • Must be able to lift 75 pounds, full use of arms to hands to use tools, must be able to climb up and off equipment and be able to see close as well as distant, • Requires a valid and current driver’s license

Job Description About Mobile Air & Power Rentals Mobile Air provides temporary cooling, heating, dehumidification, and power solutions. With our rental portable air conditioners, cooling towers, chillers, heaters, dehumidifiers, generators, and power distribution, we can cover all power and HVAC rental needs nationwide. We provide solutions that help people save time and money by renting the equipment that builds our communities, improve businesses, and helps create memories at special events. If you have a passion for helping others, then join a $65 billion industry that reflects today’s sharing world by creating experiences that change communities—and lives. Discover your purpose – work in rental! Position Overview: This position will be responsible for diagnosing problems, performing repairs, conducting routine maintenance on our generators, provide technical support to Service Technicians in the field, and may be deployed to the field for major field troubleshooting/repairs at customer sites if necessary. This position will require a strong understanding of electrical systems, diesel engines, and power generation in order to perform their job effectively. This involves an extensive knowledge of how to safely operate equipment while maintaining proper safety protocols. Responsible for maintaining and completing all required documentation of work performed. Principle Duties: • Install, maintain, and repair generators and other mechanical equipment according to company standards, to include meeting local, state, and federal regulations., • Perform preventative maintenance on generators, including but not limited to oil changes, filter changes, and belt replacements. This is for preventative maintenance that is required between customer rentals and annual preventative maintenance., • Perform repairs or replace defective parts and work with leadership if repairs need to be outsourced to a third-party generator repair facility., • Respond to service calls in a timely manner and troubleshoot problems over the phone or in person as required. Provide support to Service Technicians who are deployed to a customer site to repair/troubleshoot generator., • Assist or may lead large field installations and aid technicians that are deployed to do temporary generator installations. This may include travel to job sites., • Serve as Primary Technician for all large KVA generators and associated equipment stored at this location., • Will be a primary contact for the region as our rental fleet becomes remotely monitored., • Provide mentoring and training for Service Technicians that are based in Mobile Air/Resolute Branches and Depots., • Associate degree or technical degree in diesel mechanics, power generation, or a related field preferred., • 5-years’ experience in generator maintenance, installation, and repair, • Strong knowledge of diesel engines, • Strong understand of electricity, electrical circuits, and electrical safety, • Must be a self-starter and have ability to work with minimal supervision, • There is some required travel to support installation, troubleshooting, and potential support/training at other MAPR locations, • Travel is expected and will include overnight stays., • Ability to lift 50 pounds using safe work practices., • Valid Driver’s license with a driving record that meets Company standards., • Competitive hourly pay, • Quarterly bonus!, • Entry level positions need little to no experience, • Health, Vision, and Dental Insurance, • Life Insurance, • 401k with company match, • Paid time off (vacation, sick, holidays), • Career development, • Employee discount programs #LI-Onsite

Job DescriptionCOMPETITIVE COMPENSATION PLAN $19.00 TO $22.00 per hour *Plus Monthly Efficiency Incentive WHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. We currently operate in 40+ locations across 11 states, and we have over 1,500 team members. • Bruckner’s is more than just a place selling parts and working on trucks, • We are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it, • We contribute to our local communities, • We care about our people OUR CORE VALUES, • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER, • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace SERVICE LEASING C TECHNICIAN POSITION SUMMARY • Fuel and Wash Trucks including detailing inside., • Check in and out Rental/ Lease Units, • Complete Mobile Maintenance on all equipment (3.0), • Drain Oil and Refill, • Change Filters (ALL) If needed, • Grease all Fittings, • Check all Tires (32’s and tire pressures), • Gauge all Brakes, • Adjust brakes if needed, • Check and adjust 5th Wheel, • Check all fluids in trans and rear axles, • Check Wiper Blades, • Complete Alignments (All Axles), • Check and Replace all Lights if needed., • Heater and A/C check., • Belt inspections and replacement if needed., • Change Airlines and Electrical Cords. If needed., • Complete all necessary paperwork and work orders. Make sure all related parts are charged out on correct work order., • Maintaining current inventory on mobile unit., • Keep mobile unit clean inside and out., • Repair and locate air leaks., • Be able to use diagnostic software. Troubleshoot codes., • Change starter and Alternators, • Change Brakes, • Change Wheel Seals, • Troubleshoot Electrical issues, • Any and all Exhaust related issues, • 50% Completed on TDP, • CDL License Want to know more about our family-owned company, Proud that our 1000+ employees view us as the employer of choice! YouTube- Service Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Job Description Pay Range: $17-$19 hourly (Full Time Position) About Carvana At Carvana, we sell cars—but we're not car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own mom. Period. That's why every vehicle goes through Carvana's process, where it's inspected, perfected, and prepared to meet our high standards before it ever reaches you. And now, we're bringing those same values to our new car dealerships—delivering quality, trust, and care you'd be proud to share with Mom.We strive to provide only the highest quality vehicles to our customers in our mission to deliver a no-hassle, better car buying experience. We are actively looking for passionate and talented individuals who can help us deliver on that promise. Think you've got what it takes to join our team? Keep reading below to see what we're looking for! About the team and position We're looking for an Express Technician (Lube) to join our growing team. You'll be the first line of defense in vehicle maintenance, performing a variety of essential services that keep our customers on the road safely. You will work in a fast-paced, high-volume environment, ensuring every service is completed with precision and efficiency. If you are detail-oriented, have a strong work ethic, and are passionate about automotive care, we want to talk to you. What you'll be doing • Vehicle Maintenance & Repair: Perform express services including oil changes, tire rotations, fluid top-offs, and multi-point inspections with speed and accuracy. This includes identifying and documenting any additional vehicle maintenance needs., • Operational Excellence: Adhere to all dealership and OEM procedures for service work. Maintain a clean, safe, and organized work environment, ensuring tools and equipment are properly stored and maintained., • Customer Communication: Accurately document all services performed and communicate any findings to the Service Advisor. Answer any technical questions about the express services and multi-point inspection as needed., • Team Collaboration: Work collaboratively with fellow technicians, parts team members, and service advisors to ensure a smooth and seamless workflow., • Minimum of 1 year of professional automotive repair experience, • Foundational knowledge of automotive systems, including engine, brakes, and tires. Familiarity with a wide range of vehicle makes and models is a plus., • ASE certifications are a plus but not required., • Strong attention to detail and a commitment to quality work., • Ability to work efficiently in a fast-paced environment while maintaining high standards., • Excellent communication skills and a team-oriented mindset., • Proficiency with diagnostic tools and shop equipment is a plus., • Full-Time Position with a competitive hourly wage, • Medical, Dental, and Vision benefits, • 401K with company match, • A multitude of perks including student loan payments, discounts on vehicles, benefits for your pets, and much more, • A great wellness program to keep you healthy and happy, both physically and mentally, • Access to opportunities to expand your skillset and share your knowledge with others across the organization, • A company culture of promotions from within, with a start-up atmosphere allowing for varied and rapid career development, • A seat in one of the fastest-growing companies in the country Other requirements To be able to do your job at Carvana, there are some basic requirements we want to share with you. • Must be able to read, write, speak and understand English, • Must be at least 18 years of age, • Must have a valid driver's license, • A clean driving record with no more than two moving violations or DUI's in the last three years, • The physical environment requires the employee to work both inside and outside in heat/cold, wet/humid, and dry/arid conditions, • Will be required to use personal protective equipment to prevent exposure to hazardous materials, • May be required to work overtime and weekends., • Frequent standing and sitting with varying periods of each, • May at times require working different shifts, • Lift up to 60 pounds frequently Legal stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Job Title: Asset Management Program Manager / Senior Project Manager Location: Dallas, TX and Houston, TX FLSA Classification Exempt Job Description: Orbital is seeking an Asset Management Program Manager / Senior Project Manager with over ten years of experience to manage a diverse portfolio of projects and programs within a client fleet. This role involves providing both technical leadership and project execution oversight in a consulting environment and requires broad-based expertise in the power generation industrial sector. The Program Manager will be responsible for directing multi-year, multi-site asset management initiatives that combine inspection, engineering, risk assessment, and capital planning. The successful candidate will act as a trusted advisor to clients, taking ownership of program execution, technical leadership, and continuous improvement. This includes managing multidisciplinary teams and maintaining responsibility for the scope, schedule, budget, quality, and safety of all projects. The position is primarily office-based, involving a mix of in-office, remote, and periodic field work at local client facilities. Essential Functions Asset Management Program Leadership * • Lead the development, execution, and ongoing management of Asset Management and Asset Integrity programs, including structural and other infrastructure assets, • Serve as the primary technical and programmatic point of contact for assigned clients, ensuring alignment with asset lifecycle goals, risk tolerance, and operational priorities, • Support clients with long‑term planning efforts, including inspection strategies, risk‑based prioritization, repair planning, and program optimization, • Oversee engineering, inspection, and design activities across multiple concurrent projects within client asset programs, • Plan, schedule, and direct the work of engineers, designers, inspectors, and subcontractors to ensure consistent, first-time quality execution, • Review and approve technical deliverables, • Develop, maintain, and improve technical standards, specifications, and inspection methodologies used across Asset Management programs, • Ensure all work is executed in accordance with Orbital’s Quality Management System (QMS) and applicable client, regulatory, and industry requirements, • Manage and strengthen long‑term client relationships within the region, • Collaborate with Orbital leadership and Strategic Partners to support program expansions, renewals, and new Asset Management opportunities Please note that this job posting does not list all duties and responsibilities that are required of this job. Duties and responsibilities may change at any time with or without notice. Qualifications: • Bachelor of Science degree in Structural Engineering or Mechanical Engineering from an accredited university or a minimum of 10 years of directly relevant Asset Management or Project Management experience, • Minimum of 10 years of experience, preferably within a consulting engineering or asset integrity environment, • Project Management Professional (PMP) certification is preferred, • TWIC card holder preferred, • Demonstrated experience leading Asset Management, Asset Integrity, Mechanical Integrity (MI), or Risk‑Based Inspection (RBI) programs is preferred, • Experience supporting asset‑intensive industries such as oil & gas, refining, chemical processing, power generation, manufacturing, steel, mining, or materials processing, • Strong understanding of Asset Management principles, including inspection planning, risk‑based prioritization, lifecycle decision‑making, and program governance, • Proficiency with project management tools, project controls, and scheduling software (e.g., Microsoft Project), • Excellent written and verbal communication skills, with the ability to interface effectively with operations, maintenance, engineering, and management personnel, • Demonstrated ability to lead teams, manage multiple priorities, and operate successfully in a collaborative consulting environment This is an on-site and hybrid / remote position. Compensation is based on market data and internal equity and may vary depending on the candidate’s location. Salary Range: $93,000-157,000 annually (based on experience, qualifications, and location) Benefits: A commitment to excellence and hard work will be rewarded with a competitive salary, career advancement opportunities, and a comprehensive benefits package designed to support your health, financial security, and work-life balance. Our benefits include medical, dental, vision, and prescription drug coverage; a 401(k)-retirement savings plan; and supplemental insurance options. We also provide company-paid life and AD&D insurance, company-paid short-term disability coverage, and a generous paid time off program to ensure you have the support and flexibility you need both professionally and personally. About Orbital: Powered by People, Driven by Solutions Since 1969, Orbital has been specializing in project development, project execution and asset management for the heavy industrial sectors and utilities. Our regional offices, hands-on mentality, and world-wide integrated teams provide an ability to leverage subject matter experts and industry best-practices wherever a project may lie geographically. Our focus steadfastly remains on finding and delivering the best solution, regardless of where that team sits across our organization. At Orbital, our power is our people. Equal Opportunity Statement: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionDescription: Pack Auto Group believes our success is attributed to our employees. Since 1980, we have continued to grow our business and culture while holding true to our core values of fun, integrity, caring, self-discipline, and continuous improvement. We are passionate about harnessing a culture where our employees LOVE their jobs and customers LOVE our employees. We are focused on using technology to create a best-in-class experience for our customers. Dominating our share of the market in the sales and servicing of Pack Auto Group products in the DFW market while maintaining a top ranking in customer service, employee satisfaction and owner loyalty. Who we are and how we do business is defined in our Core Values, Vision, and Mission statements. BENEFITS: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Long- and Short-Term Disability Insurance, • 401(k), • Life insurance, • Critical Illness, • Hospital Indemnity, • Accident Insurance, • Paid vacation for full time employees, • Employee discount on cars, parts, and service, • Drug Free Work Environment, • Saturday lunches are provided., • We’re passionate about our culture. RESPONSIBILITIES: • As an Entry-Level Automotive Service Technician, you’ll perform basic vehicle repairs as assigned and in accordance with dealer and factory standards., • You will work alongside other technicians and initially handle maintenance work such as oil changes., • Your attention to detail will make you an asset to the team as you ensure assigned repairs are completed on time and deliver top-notch work to delight our customers., • In this role, you’ll interact daily with other team members including service advisors, other technicians, parts associates, cashiers, sales associates, and managers., • Performing vehicle repair and/or maintenance work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards to drive Customer loyalty., • Communicating with Parts Department and service advisors regularly to effectively manage production and Customer communication., • Conducting multi-point inspections to make appropriate recommendations to ensure the safety and reliability of Customer vehicles., • Documenting work performed on each vehicle on the repair order., • Maintaining an inventory of normal technician’s tools not normally inventoried by the Service department as “special tools.”, • Keeping abreast of factory technical bulletins and participating in factory-sponsored training classes as appropriate, • Providing an exceptional customer experience to drive loyalty.Requirements: To be a good fit for the Entry-Level Automotive Service Technician opportunity, you will have: • You have knowledge of automotive basics and an interest in developing a career in automotive repair and service., • A positive attitude and passion for learning and developing your skills., • General mechanical skills, manual dexterity, and the ability to operate power and hand tools, and other types of machinery., • Knowledge of the automotive repair life cycle, • Attention to detail with organization and follow-up skills., • Demonstrated customer service skills., • Possess strong communication skills., • Must be willing to submit to a drug screen prior to employment., • Valid driver's license and clean driving record that is acceptable to our policies., • Exceptional communication skills. DISCLAIMER The preceding job description has been designed to indicate the general nature and essential duties and responsibilities of work performed by employees within this classification. The duties described are not to be interpreted as being all-inclusive to any specific employee. Management reserves the right to add, modify, change, or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Nothing in this position description changes the at-will employment relationship existing between Pack Auto Group and its employees.

Job Description We are seeking experienced contract accountants to support our clients' accounting and reporting needs on a project and interim basis, in full-time W-2 roles through our firm, with assignments typically ranging from 3 to 12 months in duration. As a contract accountant in our network, you will take on meaningful assignments that leverage your expertise, provide variety, and allow you to step into critical roles without the long-term commitment of a permanent position. These roles are ideal if you enjoy solving problems quickly, owning deliverables, and seeing the impact of your work in real time. About the Opportunity Our clients engage contract accountants to cover parental leaves, support system implementations, stabilize teams after turnover, or add bandwidth during peak close and reporting cycles. As part of our talent pool, you'll be considered for: • Revenue accounting roles focused on oil and gas properties and production., • JIB assignments handling joint interest billing and owner relationships., • External/SEC reporting projects supporting public-company filing requirements. Core Responsibilities • Lead or support monthly, quarterly, and year-end close, including journal entries, accruals, reconciliations, and variance analysis., • Maintain accurate general ledger records and ensure proper coding, classification, and documentation for all transactions., • Prepare supporting schedules for internal management reports and external auditors., • Investigate and resolve discrepancies in account balances, collaborating with operations, finance, and other departments., • Record and reconcile oil, gas, NGL, and other production revenue for operated and non-operated properties., • Prepare monthly revenue allocations, accruals, and distributions, including royalty owner and working interest owner payments., • Reconcile revenue, suspense, receivable, and payable accounts and address volume, price, and ownership variances., • Coordinate with land, marketing, and production teams to resolve ownership changes, title issues, and pricing discrepancies., • Prepare and review joint interest billings and partner statements in line with joint operating agreements and COPAS guidelines., • Allocate operating and capital costs to working interest owners, ensuring accuracy of decks, cost centers, and AFEs., • Maintain JIB sub-ledgers, clear suspense items, and reconcile JIB-related balance sheet accounts., • Respond to non-operator and partner inquiries, research disputes, and prepare corrections or adjusting entries., • Assist in preparing quarterly and annual financial statements and related footnote disclosures., • Support drafting and review of 10-Q, 10-K, 8-K, and other external reporting documents., • Perform tie-outs, data validation, and consistency checks between trial balances, consolidation systems, and final filings., • Support technical accounting research, memos, and implementation of new or complex standards., • Manage day-to-day accounting activities such as AP, AR, fixed assets, and payroll entries (depending on client)., • Handle multiple entities, consolidations, intercompany eliminations, and foreign currency transactions where applicable., • Prepare internal management reports and analysis to help leadership understand performance and trends., • Bachelor's degree in accounting, finance, or related field; CPA or similar credentials are a plus., • 3+ years of hands-on accounting experience in revenue, JIB, external/SEC reporting, or corporate/GL roles., • Experience in energy/oil & gas or other complex, asset-intensive industries is highly valued., • Proficiency with common accounting/ERP systems and strong Excel skills., • Ability to ramp up quickly, work independently, and communicate clearly with cross-functional teams., • All engagements are full-time (40 hours/week) during core business hours., • All roles are W-2 through our firm, with competitive hourly rates based on experience, assignment complexity, and location., • Opportunities include onsite, hybrid, and fully remote arrangements, depending on client needs. Submit your resume highlighting experience in revenue accounting, JIB, external/SEC reporting, and/or general ledger roles. Please note: • Preferred assignment length (3–6 months, 6–12 months, or flexible)., • Preference for remote, hybrid, or onsite work. To learn more about Augmentis, visit our website: Representation/employer clarification: This search is being conducted by Augmentis on behalf of our client. The selected candidate will be employed directly by our client, not by Augmentis. EEO + disclaimer Our client and Augmentis are Equal Opportunity Employers. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. This job posting does not constitute a contract or guarantee of employment, and role details are subject to change based on our clients' needs. By applying, you acknowledge that your information may be shared with our client for recruitment and hiring.

Job DescriptionDescription: Pack Auto Group believes our success is attributed to our employees. Since 1980, we have continued to grow our business and culture while holding true to our core values of fun, integrity, caring, self-discipline and continuous improvement. We are passionate about harnessing a culture where our employees LOVE their jobs and customers LOVE our employees. We are focused on using technology to create a best-in-class experience for our customers. Dominating our share of the market in sales and servicing products in the DFW market while maintaining a top ranking in customer service, employee satisfaction and owner loyalty. Who we are and how we do business is defined in our Core Values, Vision and Mission statements. BENEFITS: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Long- and Short-Term Disability Insurance, • 401(k), • Life insurance, • Critical Illness, • Hospital Indemnity, • Accident Insurance, • Paid vacation for full time employees, • Employee discount on cars, parts, and service, • Drug Free Work Environment, • Diagnose and Repair: Identify and troubleshoot vehicles using diagnostic tools and software. Perform necessary repairs, replacements, or adjustments to restore functionality., • Maintenance: Conduct routine maintenance, such as oil changes, tire rotations, brake inspections, and other preventative measures, to ensure equipment remains in good working condition., • Field Service: Travel to customer sites to perform on-the-spot repairs and maintenance. Ensure all necessary tools, parts, and equipment are available for efficient service delivery., • Customer Interaction: Communicate effectively with customers to understand their concerns, explain repairs, and provide updates on the status of their equipment., • Documentation: Maintain accurate records of all services performed, including work orders, parts used, and time spent on each task. Ensure all paperwork is completed and submitted in a timely manner., • Safety Compliance: Adhere to all safety regulations and protocols while performing repairs and maintenance. Ensure that all work is conducted safely to prevent accidents and injuries., • Inventory Management: Monitor and manage inventory levels of parts and tools. Order replacements as needed to ensure that service operations are not interrupted., • Training and Development: Stay updated on the latest technology, tools, and industry best practices. Participate in ongoing training to enhance skills and knowledge., • Responsibilities: Must be on time for mobile appointments. May require working on weekends and after hours.Requirements: Requirements • High school diploma or equivalent, • At least 2 years of experience as an auto technician, • Knowledge in all aspects of automotive repair and maintenance, • Fast, eager learner and team player, • Excellent written and verbal communication skills, • Strong customer service skills, • Computer skills and willingness to learn new problems, • Ability to operate electronic diagnostic equipment, • Clean driving record & valid driver’s license, • Willing to submit to a background check and drug screen prior to employment. The preceding job description has been designed to indicate the general nature and essential duties and responsibilities of work performed by employees within this classification. The duties described are not to be interpreted as being all-inclusive to any specific employee. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Nothing in this position description changes the at-will employment relationship existing between Pack Auto Group and its employees.