Trabajos packaging engineer en Austin, TexasCrear alertas

Amazon is seeking a highly experienced and hands-on Principal Manufacturing Engineer to lead the development and deployment of electronics manufacturing operations, with a focus on PCBA production and wire harness/cable assembly integration. This is a senior individual contributor role serving as the technical authority responsible for establishing world-class electronics manufacturing processes at production scale. The ideal candidate will bring 12+ years of progressive experience in electronics manufacturing environments, with deep expertise in SMT assembly, PCBA test, wire harness fabrication, and electronics integration into complex electromechanical systems. This individual must be capable of driving technical execution across cross-functional organizations while operating effectively in fast-paced, dynamic environments with demanding schedules. This role requires a combination of technical authority, influential leadership, strategic thinking, and hands-on problem-solving to support Amazon's manufacturing and operational objectives. Key job responsibilities Own the end-to-end electronics manufacturing line concept, design, requirements, process flow, equipment specification, automation strategy, facility integration, installation, commissioning, rate demonstration, and handover to operations teams. Own line requirements including layout, throughput, yield targets, cycle times, headcount, and Capex for both PCBA and wire harness production. Develop and validate robust manufacturing process parameters for SMT placement, reflow, wave solder, selective solder, conformal coating, wire termination, and cable assembly from prototype through full-rate production. Oversee detailed design of production systems; develop equipment specifications; identify vendors and manage the RFQ, selection, FAT, and deployment process for pick-and-place, reflow ovens, AOI/SPI, ICT/FCT, wire processing, and harness assembly equipment. Lead and manage project scope from concept through production launch. Own the handover process to sustaining teams. Partner with electrical engineering and product design teams to drive DFM considerations for PCBA layout, component selection, wire routing, connector strategy, and testability that enable production and cost targets. Drive PFMEA and OEE considerations as far upstream in product development as possible. Optimize for first-pass yield, minimal rework, and test coverage. Establish and standardize production processes, ESD controls, solder process windows, test strategies, control plans, and operational documentation. Drive continuous improvement using Lean Manufacturing, Six Sigma, and data-driven problem-solving to improve yield, reduce defects, and optimize cost structures. Lead strategic technical engagement with EMS partners, component suppliers, test equipment vendors, and wire harness manufacturers. Ensure compliance with IPC standards, ESD protocols, and product safety/regulatory requirements throughout the manufacturing process. Mentor and develop peers and junior engineers while fostering a culture of technical excellence, safety, and operational discipline. Bachelor's degree in Electrical Engineering, Manufacturing Engineering, or equivalent technical discipline. 12+ years of direct manufacturing engineering experience in electronics production environments (PCBA, wire harness, or electronics integration). Deep expertise in SMT assembly processes including stencil printing, component placement, reflow soldering, and inspection (AOI, SPI, X-ray). Demonstrated success leading commissioning, startup, and production ramp-up of integrated electronics manufacturing operations. Strong experience with electronics test strategy development and deployment (ICT, functional test, boundary scan, flying probe). Experience with wire harness design for manufacturing, cable assembly processes, termination methods, and continuity/hipot testing. Strong understanding of Lean Manufacturing principles and Six Sigma methodologies (Green Belt minimum; Black Belt preferred). Proven ability to influence and drive execution across cross-functional teams in complex industrial environments. Master's degree in Electrical Engineering or Manufacturing Engineering. IPC certifications (CID, CID+, or IPC-A-610/J-STD-001 expertise). Experience with flex PCB assembly, rigid-flex integration, or SMT-on-flex processes. Experience with high-density interconnect (HDI) boards, fine-pitch BGA/QFN assembly, or advanced packaging technologies. Experience with conformal coating, potting, encapsulation, or electronics protection processes for harsh environments. Experience supporting multi-site electronics production operations or new facility launches or expansions. Experience with complex electromechanical systems requiring distributed electronics across multiple interconnected assemblies. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit _ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at _. USA, TX, Austin - 163,400.00 - 221,000.00 USD annually

Job DescriptionCompany Description Renesas Electronics Americas (REA) is a dynamic, multi-cultural tech company where employees can learn, mentor and thrive. REA brings together the strong financial foundation of a multi-billion dollar global operation and the flexibility and velocity of a smaller organization. We are developing technologies for the latest advances in mobile computing, secured connected devices, autonomous driving, smart homes and factories and more. Our solutions are at the heart of products developed by the major innovators around the world. Join us and be part of what’s next in electronics. This is an opportunity to join a top-notch low-voltage power MOSFET design team. As part of Renesas’s Mobility, Infrastructure and IoT Power Business Division, this Engineer will work on next-generation power MOSFET products for multiple markets. Job Description We are seeking a Principal Device Design Engineer to develop cutting-edge switching power MOSFETs for 12V to 80V applications. You will participate in the full product cycle, from the conception of the architecture through final product characterization. This will involve the development of novel device structures, optimization for performance and ruggedness using TCAD simulation, and development of test and characterization methods to demonstrate device capability and limits. You will interface with process integration engineers to develop cost-effective, manufacturable designs and consult with IC design teams developing the MOSFET drivers. If you like problem-solving and challenging the status quo, we’d like to hear from you. What You'll Do • Develop high-performance power switching devices based on fundamental physical principles and available manufacturing capabilities, • Develop proprietary process flows and identify critical design parameters and process variation sensitivities that affect manufacturability, • Develop simulation experiments to identify critical process and design parameters and center them for reliability, performance, and manufacturability, • Work closely with fab process engineers toward the development of new process recipes and design rules, • Develop intelligent process and layout experiments for engineering lots to minimize development cycle time, • Execute test mask and product mask layouts with support from CAE team, • Identify testing requirements and techniques for new technologies and advise during characterization and testing, • Analyze measured data on devices and test structures to optimize device design and process, • Provide engineering support for existing power semiconductor products to maintain yield and performanceQualifications, • Expertise in one or more of the following areas, • Power Semiconductor Devices, • Semiconductor Device Physics, • Semiconductor Device Reliability, • Semiconductor Manufacturing, • Materials Science, • TCAD modeling and simulation, • Device layout, • Understanding of switched-mode power applications, • Implications of packaging and PCB parasitics during switching, • Implications of package and PCB materials on thermal characteristics, • Influence of / requirements for MOSFET driver, • Desired experience, • Demonstrated track record of commercially successful power MOSFET developments, • Direct experience in advanced Switching Power MOSFET structures, • Education, • M.S. or Ph.D. in relevant field with 7+ years’ experience in power semiconductor device engineering Additional Information Renesas is an embedded semiconductor solution provider driven by its Purpose, To Make Our Lives Easier. With a global team of over 21,000 engineers and problem solvers in more than 30 countries, we offer the opportunity to work on world‑leading technology for Automotive, Industrial, Infrastructure, and IoT, shaping a safer, healthier, greener, and smarter future. At Renesas, TAGIE is our culture, grounded in being Transparent, Agile, Global, Innovative, and Entrepreneurial. It shapes how we work, grow and deliver on our purpose together. This collaborative spirit and mindset drive our semiconductor technology to transform industries and impact millions of lives. We believe in rewarding our employees with a competitive benefits package alongside their salary. More information will be provided during the hiring process. Are you ready to join our team and shape the future with us? Renesas Electronics is an equal opportunity and affirmative action employer, committed to supporting diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by law. For more information, please read our Diversity & Inclusion Statement. Renesas Electronics deals with dual-use technology that is subject to U.S. export controls regulations. Under these regulations it may be necessary for Renesas to obtain U.S. government export license prior to release of technology to certain persons. The decision whether or not to file or pursue an export license application is at the sole discretion of Renesas.

Job Description Skyways designs, builds, and operates fully autonomous long-range cargo aircraft. Founded in 2017, the company has spent the last eight years developing and deploying autonomous logistics systems for real-world operations. Our V2 aircraft carries 30 lbs up to 500 miles, and V3 has a maximum range of well over 1,000 miles, a maximum useful load of 100 lbs, and a maximum endurance of nearly 20 hours. Both use a hybrid-electric architecture that takes off like a helicopter and cruises like a plane, enabling long-range autonomous delivery without traditional runway infrastructure. Today, Skyways aircraft operate across three continents in controlled national airspace under FAA oversight and in support of U.S. military operations. We are transitioning from prototype development to full-rate production and scaling toward large autonomous cargo fleets. Backed by Y Combinator and a $37M AFWERX STRATFI award from the U.S. Air Force, Skyways is creating a new form of transportation to advance our civilization from Austin, Texas. The Opportunity Skyways is hiring a Staff Mechanical Engineer to lead the architecture and development of critical aircraft systems. This role owns complex hardware from early concept through build, testing, and flight validation. Staff engineers play a key role in defining mechanical design strategy across the aircraft, helping guide subsystem architecture, resolving system level challenges, and supporting engineers across the team. This role requires deep technical expertise and the ability to move quickly through design, build, and test cycles. What You'll Do: Lead the architecture, design, integration, and validation of critical aircraft structures Own complex aircraft hardware from early concept through detailed design, prototype build, ground test, flight test, and iteration Drive system level integration across structures, avionics, propulsion, and payload systems, to resolve interface, packaging, and performance tradeoffs Partner closely with manufacturing to ensure designs are buildable, testable, and capable of scaling from prototype to repeatable production Participate in aircraft builds, integration efforts, and flight test campaigns Mentor engineers and help define engineering standards and best practices Help identify and resolve system level design challenges across the aircraft What You'll Bring: Bachelor’s or Master’s degree in Mechanical Engineering or a related field Deep experience designing aircraft or flight vehicle structures, mechanisms, and subsystem integration Track record of owning novel hardware from a blank page, including the first principles sizing, loads analysis, and trade studies that set the design, not just execution within an existing architecture Experience taking hardware from concept through build, testing, and deployment Strong system level thinking and ability to resolve complex integration challenges Strong track record of working directly with prototype builds, hardware integration, and test campaigns, not just analysis or documentation Ability to collaborate across engineering, manufacturing, and flight operations teams Bonus Points: Experience with composite structures or lightweight aerospace systems Experience leading hardware development in robotics, aerospace, or autonomous systems Experience working in startup or rapid hardware development environments In addition to base salary, offers include stock options, so you own part of what you build. Benefits include medical, dental, and vision coverage, paid time off, paid holidays, a 401k, and life insurance. Relocation assistance is available for candidates moving to Austin. Want to join our mission? Apply to learn more! Due to U.S. government contract requirements, this role is limited to U.S. citizens, U.S. permanent residents, or candidates from specific countries authorized under applicable export control regulations. Skyways is an Equal Opportunity employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, national origin, sex, sexual orientation, gender identity, disability, protected veteran status or any other factor protected by applicable local, state or federal laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Electroninks is quickly expanding and is seeking a full-time Mechanical Engineer, Precision Automation to joining the CircuitJet Team. You should be able to design a machine gantry, spec the sheet metal enclosure, pick the right motor, wire it up, and know when a problem calls for a clever mechanism versus an electrical solution. You’ll work hand‑in‑hand with experienced electrical engineers the whole way. The work is significantly mechanical engineering, but not exclusively: you’ll think across domains because that’s what building a real machine requires. You’ll own the structural and motion architecture of a complex, multi‑process machine: precision gantries, sheet metal enclosures, CNC‑machined stages, tool changers, fixturing, and board handling, all to micron‑level accuracy and production‑ready reliability. Beyond the mechanical design, you’ll build reliable processes across pick‑and‑place, laser ablation, inkjet printing, solder paste dispensing, alignment, and calibration. And as we move from hand‑built prototypes toward contract‑manufactured production, you’ll help scale the machine itself. You’ll work on a very small team of industry experts who live, eat, and breathe PCBA production. People obsessed with crafting the perfect machine, the perfect process, and the opportunities they unleash. If you’ve built your own 3D printer or robots, get excited about manufacturing machines, and love the idea of a single platform that does the full PCBA stack locally (bare substrate to finished, assembled board), this is your role. Duties and Responsibilities: • Design and detail the machine. Architect multi‑axis gantry systems, structural frames, sheet metal enclosures, and CNC‑machined stages. Select linear guides, ball screws, motors, bearings, and drives to hit accuracy, stiffness, and throughput targets. Design toolhead mounts, board handling, fixturing, and transfer mechanisms., • Integrate across domains. Spec and wire motors, encoders, sensors, drivers, and cabling into mechanical assemblies, working hand‑in‑hand with experienced EEs. Know when to solve a problem with a mechanism and when to reach for a sensor and a cable., • Own the processes. Develop reliable, repeatable processes for pick‑and‑place, laser ablation, conductive inkjet printing, solder paste dispensing, board handling, alignment, and calibration. Characterize process windows and iterate until each station performs to spec., • Build, test, iterate. Assemble prototype gantries and subsystems hands‑on. Debug, align, and test for repeatability. Work with materials scientists to translate ink and paste properties into machine parameters that produce consistent results., • Scale it. Help take production from a handful of hand‑built units to working with contract manufacturers for volume. Design for manufacturability, serviceability, and cost‑reduction., • Document everything. Produce detailed CAD assemblies, drawings, BOMs, tolerance stacks, and interface documentation. Qualifications: Required • BS or MS in Mechanical Engineering, Mechatronics, Robotics, or equivalent practical experience., • 3+ years building robots, machines, or mechatronics systems professionally., • Strong experience designing precision motion systems, gantries, CNC machines, robotics, or automation equipment., • Hands‑on machine building, whether professionally (CNC routers, pick‑and‑place, production equipment) or through personal projects (custom 3D printers, robots, laser cutters)., • Deep CAD proficiency is non‑negotiable., • Solid mechanics fundamentals: stiffness, tolerances, bearings, drivetrains, vibration, thermal effects. Comfortable with fabrication (3D printing, machining, laser cutting, sheet metal)., • Hands‑on electrical integration (wiring motors, sensors, drives) working alongside experienced EEs. Preferred • Experience with high‑precision linear stages, micron‑scale positioning, servo systems, or closed‑loop motion., • Familiarity with machine vision‑driven alignment and mechanical design to support optical calibration., • Background in industrial automation, semiconductor tools, PCB equipment, or lab instrumentation., • Experience designing for DFM and low‑volume production scaling to contract manufacturing., • Excited about using AI in your engineering workflow to speed up calculations, select components, and get design critiques, while maintaining your own judgment. You use AI to move faster, not to think for you. When colleagues ask your opinion, you have real thoughts, not a regurgitated ChatGPT answer., • Personal projects that show genuine passion for machines (a custom 3D printer, a robot, a home CNC) speak louder than credentials. Benefits • Health, Dental, and Vision Insurance – provided by Employer, • Short-term Disability, Long-term Disability – provided by Employer, • Life Insurance – provided by Employer, • 401(K) Plan with 2% match, • Paid Time Off (PTO), • Paid Holidays About Electroninks: Electroninks Incorporated is the market-leader in the production and scaled manufacturing of metal-complex conductive inks. We have developed a full suite of proprietary conductive ink solutions, world-class manufacturing partners, and complimentary equipment ecosystems, thus accelerating time to market for new products and additive manufacturing breakthroughs. Electroninks’ metal complex inks – including silver, gold, platinum, nickel and copper –deliver higher conductivity, flexibility and cost-effectiveness. We are the only domestic U.S. supplier of this full suite line of particle-free inks. The company’s conductive inks have been adopted by customers requiring highly reliable solutions for applications in semiconductor packaging, printed circuit board (PCB) manufacturing, consumer electronics, wearables, medical devices and more. We also partner closely with best-in-class equipment and integration partners to provide customers a total ink and process solution with the ultimate goal to reduce the manufacturing costs and complexity. Our goal is to successfully implement our conductive inks into our customers products and close the gap of commercialization. We have a world-class talented and professional team, with expertise in electronics, semiconductor, advanced materials, chemistry, and ink production. We are backed by strong strategic partners and some of the most prominent global technology investors. We are headquartered and located in Austin, Texas.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Mechanical Engineer to our Mechanical Engineering team. If you enjoy working in a startup environment and are passionate about developing space hardware for leading-edge communications satellites, we would like to hear from you. In this position, you will be responsible for mechanical design aspects of Cesium phased array antennas, subsystems, and interfaces through all phases of the development process. The ideal candidate will be versatile and proficient in mechanical analysis, electronics packaging, computer-aided design (CAD), mechanical interfaces, thermal architecture, spacecraft propulsion, deployable and actuated structures, and environmental qualification of spacecraft antennas and payloads. You will be responsible for mechanical designs from concept through space flight including requirements definition, architecture trades and block diagrams, analysis, manufacturing, testing, qualification, and in-orbit support. The successful candidate will also present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Bachelor of Science (BS) in Mechanical or Aerospace Engineering from an accredited university or institution, • Minimum of 4 years of experience in space antenna and payload mechanical engineering to include electronics packaging, thermal, shock, vibration, stress dynamics, and cost. A Master's degree may count as two years of experience., • Experience in conducting architectural trade studies including parametric and first-order cost and physical analysis, • Experience with professional mechanical and FEA CAD tools, such as Ansys Mechanical, SolidWorks Simulation, and Thermal Desktop, • Experience with CNC manufacturing and GD&T, • Experience with advanced aerospace manufacturing and materials including sandwich panels and carbon composites, OR experience with high-reliability deployment mechanisms for space applications (including deployment, HDRMs, power delivery, etc.)., • Proficiency in detailed mechanical design (3D CAD, drawings, etc.), • Experience designing and manufacturing mechanisms and mechanical actuators, • Experience with EMI/EMC mitigation techniques, • Familiarity with satellite thermal architectures including heat pipes, phase change materials, contact resistance, and surface finishes as well as fundamental understandings of orbital thermal control in a LEO environment., • Familiarity with launch and LEO environments (thermal, shock, vibe, radiation, etc), • Familiarity with design for test, manufacturability, assembly, and reliability, • Excellent written and verbal communication skills PREFERRED EXPERIENCE, • Python, C++, or other programming languages, • Experience with large, deployable antenna arrays which drive your vision for the next generation of on-orbit communications and sensor arrays., • Robotics and control systems experience, • PCBA experience. CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Liquid Cooling Mechanical Engineer Interested in getting in at the ground floor of a new, disruptive company attacking an important multi-billion-dollar problem? Businesses and consumers continue to demand increasing data services at an exponential rate -- streaming, deep learning, analytics, loT connectivity, and more. What this means is higher performing CPUs, components, servers, and ultimately Data and Edge computing centers, all generating excessive heat that is increasingly difficult to manage with traditional cooling systems. Accelsius is developing revolutionary direct-to-chip, 2-Phase cooling technologies that empower and enable Server OEMs, Data Centers, and Edge Computing Operators, to meet performance, sustainability, scale, and cost goals while serving this high-growth market for data services. Accelsius is looking for a Liquid Cooling Mechanical Engineer to design server-level liquid cooling hardware for AI and HPC platforms: cold plate loops, server plumbing, manifolds, and the pressure-containing assemblies that connect them. This engineer will take designs from first prototype through production release, translating thermal engineers’ prototypes into manufacturable hardware, and will work alongside our R&D technicians to validate them in the lab. This position will report directly to the Server Cooling Product Manager and the right candidate will be hands-on, self-directed, and comfortable owning a design across engineering, manufacturing, suppliers, and customer teams. Role Responsibilities: Design and CAD (70%) • Review thermal engineers’ concept and first-prototype designs to confirm a path to manufacturability, • Translate first-prototype server liquid cooling assemblies for GPU and CPU platforms into production-ready designs, including cold plate loops, tubing and hose routing, manifolds, fittings, and quick disconnects, within the space, serviceability, and interface constraints of OEM server chassis, • Design pressure boundaries: select materials, joining methods, and fittings; establish design, proof, and burst pressures; confirm compatibility with the working fluid, • Partner with thermal engineers on plumbing sizing, pressure drop, and flow distribution, contributing packaging constraints, component selection, and manufacturability input to their analysis, • Perform FEA to evaluate deformation and stress in pressure-containing parts and assemblies, • Produce production-ready 3D models, drawings with GD&T, and BOMs; manage revisions through ECOs in our PLM system, • Work with cold plate suppliers, braze shops, and fabricators from RFQ through first article; drive DFM and resolve supplier issues, • Lead design reviews and mentor early-career engineers on server plumbing design, • Support OEM and customer engagements with integration drawings and interface specifications Test and Validation Support (30%) • Define test requirements and acceptance criteria for pressure, leak, flow, and pressure drop testing, • Define requirements for test fixtures and hardware, and review the manufacturing team’s fixture designs against them, • Support R&D technicians in building and running tests on our R&D test rigs, • Review test data, lead root cause investigations on failures, and carry findings into the next design revision Qualifications for this role include: • 5+ years of experience with progressively increasing responsibility, • Bachelor’s degree in mechanical engineering or similar required, • Direct experience designing liquid cooling hardware for data center servers or racks required (single-phase or two-phase), • Demonstrated design of pressure-containing fluid systems: joint design, fitting selection, material selection, pressure rating, and leak testing, • Working knowledge of fluid mechanics and heat transfer sufficient to collaborate with thermal engineers on sizing and performance; CFD and thermal specialization not required, • Proficiency in a parametric 3D CAD tool (SolidWorks preferred) and producing manufacturing drawings with GD&T, • FEA experience evaluating structural deformation and stress in mechanical parts, • Record of taking designs through fabrication and release with external suppliers, • Takes ownership, communicates clearly, and works across disciplines, • Startup experience is a plus Preferred Experience: • Working with cold plate vendors and brazing manufacturers, • HVAC, refrigeration, or hydronic systems design, • Cold plate and fluid-component manufacturing processes: brazing, skiving, friction stir welding, machining, • Familiarity with OCP liquid cooling specifications, ASHRAE liquid cooling guidelines, and IEC/UL 62368-1 requirements for liquid-filled components, • ECO and configuration management in a PLM system Accelsius offers a competitive salary with equity, a full range of benefits including medical and dental, 401K, and flexible PTO. The position is based in Austin, Texas. This position includes the responsibilities outlined above and may also encompass additional duties as assigned to meet business and compliance needs. Accelsius does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, marital status, or based on an individual's status in any group or class protected by applicable federal, state or local law. Accelsius encourages applications from minorities, women, the disabled, protected veterans, and all other qualified applicants.

Job Description Job Summary Dennis Group’s Process Engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process Engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities • Develop process design basis and select unit operations, • Develop operation specifications, • Coordinate with other project disciplines (engineers, designers, architects, etc.), • Prepare process flow and piping and instrumentation diagrams, • Create process flow diagrams, • Prepare mass and energy balances, • Size and specify process and process utility equipment, • Equipment procurement and bid evaluation, • Assist project management with the development of project scope, budget and schedule for all process related work, • Help to coordinate the schedules and work of contractors for process equipment installation, • Work with clients, vendors, and suppliers to develop cost estimates and proposals, • Provide client assumptions on supply recommendations, • Develop process and instrumentation drawings (P&IDs), • Oversee process and utility equipment installations, • Provide onsite construction start-up and commissioning support, • Research process engineering best practices, • Supporting talent growth within our organization Required Education Skills and Experience • Bachelor’s degree in Chemical or Process Engineering., • 0-3 years of work experience or schooling developing process designs, • 0-3 years of work experience or schooling preparing process flow diagrams and P&IDs, • 0-3 years of work experience or schooling sizing and specifying process and process utility equipment., • 0-3 years of work experience or schooling developing project scopes, budgets and process-related work schedules, • Co-op, intern or work experience with professional services, process engineering, and food and beverage firms is a plus, • Interest in food safety and sanitary design principles and a desire learn about various food and beverage industry standards, practices, and regulations, • Proficiency with MS Office, MS Project, and AutoCAD, • Excellent oral and written communication skills with proven client interaction and experience, • Must meet Travel Requirement - On-site construction project coordination and management with travel requirements between 30-50% of the year Physical Requirements • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift-up to 15 pounds at times. Travel Requirement • Up to 50% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Company Overview ACS (Allen Control Systems) is a defense technology company building precision robotic systems for the United States and its allies. Founded by two former U.S. Navy electrical engineers with deep experience in robotics and software, ACS brings together AI, computer vision, precision motion, and advanced hardware to solve complex defense challenges across land, air, and maritime environments. Our flagship product, Bullfrog, is an autonomous precision weapon system that transforms existing weapons into highly accurate counter-drone systems — giving warfighters a scalable, cost-effective response to one of the fastest-growing threats on the modern battlefield. Bullfrog is deployed with U.S. forces, and ACS works with organizations throughout the U.S. military and national security community. Following a $200 million Series B at a $2.2 billion valuation, ACS is rapidly expanding manufacturing, accelerating Bullfrog deployments, and developing the next generation of autonomous battlefield systems. This is an opportunity to join a proven, fast-moving team and help scale technology with direct, real-world impact on national security. ACS is headquartered in Austin, Texas, with additional operations in Alexandria, Virginia; Mountain View, California; and Huntsville, Alabama. For more information, visit allencontrolsystems.com. Position Overview: We are seeking a highly skilled Electrical Engineer with strong expertise in wire harness design, electrical integration, and system-level wiring architecture for complex electromechanical systems. The ideal candidate will play a critical role in designing and implementing robust wiring solutions that connect sensors, computer systems, power distribution, and actuators across our autonomous defense platforms. This engineer will work closely with electrical, firmware, and mechanical teams to ensure reliable signal and power distribution throughout the system while maintaining durability in demanding operational environments. The ideal candidate will thrive in a fast-paced prototyping environment and be comfortable owning electrical integration from early design through testing and deployment. What You'll Do: Design and Develop Wire Harness Systems: Create detailed wiring architectures, harness designs, and cable assemblies that support complex robotic and electromechanical systems. Electrical Integration: Support system-level integration across sensors, computing systems, actuators, and power electronics to ensure reliable communication and power delivery throughout the platform. Harness Documentation and Schematics: Develop wiring diagrams, pinout documentation, harness drawings, and electrical schematics to support both prototype and production systems. Connector and Cable Selection: Define appropriate connectors, shielding strategies, grounding methods, and cable routing solutions to meet performance and environmental requirements. Electromechanical Collaboration: Work closely with mechanical engineers to optimize harness routing, packaging, strain relief, and mechanical protection within compact system architectures. Prototype Bring-Up and Debugging: Assist with hardware bring-up, troubleshooting wiring issues, and diagnosing electrical problems during system integration and testing. Manufacturing Support: Work with technicians and manufacturing teams to support harness builds, documentation, and quality verification of cable assemblies. Testing and Validation: Perform testing and validation of electrical harnesses and integrated systems to ensure reliability in field and lab environments. What You'll Need: Experience: 2–5+ years of experience in electrical engineering with hands-on experience designing wire harnesses, cable assemblies, or electrical interconnect systems. Educational Background: Bachelor’s degree or equivalent experience in electrical engineering or a related field. Wire Harness Design: Strong experience designing wiring harnesses for complex electromechanical or robotic systems. Electrical Schematics and Documentation: Experience producing electrical drawings, harness documentation, wiring diagrams, and system-level electrical documentation. Connector and Interconnect Knowledge: Familiarity with connector types, shielding strategies, grounding practices, and cable management techniques. Electrical Integration Experience: Proven experience integrating sensors, computer hardware, power systems, and actuators in complex systems. Testing and Troubleshooting: Hands-on experience diagnosing electrical integration issues using lab equipment such as oscilloscopes, multimeters, and logic analyzers. Electromechanical Systems Experience: Experience working with robotic, aerospace, automotive, or defense-related hardware systems. High-Reliability Design Practices: Experience working with MIL-STD practices or other high-reliability manufacturing standards for wiring, harnessing, or electrical integration. You'll Stand Out: Harness Design Tools: Experience using harness and electrical design tools such as Zuken E3, Mentor Graphics/Capital Harness, RapidHarness, Altium, SolidWorks Electrical, or similar electrical CAD tools. Robotics or Autonomous Systems Experience: Experience working on robotic platforms, autonomous systems, or defense hardware. High-Reliability Systems: Familiarity with ruggedized systems designed for harsh operating environments. Signal Integrity and Power Distribution: Knowledge of best practices for managing noise, grounding, shielding, and power distribution in complex systems. Rapid Prototyping Environment: Experience working in fast-paced environments where hardware moves quickly from concept to field testing. What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation #LI-AS1

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a highly motivated engineer to lead the development and evolution of our software-defined radio (SDR) and space communications development kits. This role is responsible for delivering a seamless and powerful developer experience across our hardware development kits, board support packages (BSPs), firmware enablement tools, documentation, and source code distribution. You will operate at the intersection of hardware, embedded software, product design, and customer enablement, ensuring our platforms are robust, intuitive, and ready for mission-critical applications. JOB DUTIES AND RESPONSIBILITIES • Own the end-to-end developer experience for SDR and space communications development kits, • Define and maintain board support packages (BSPs) for customer firmware development, • Architect and manage source code distribution strategy (versioning, access control, packaging, licensing), • Design intuitive workflows for customer firmware bring-up, integration, and validation, • Develop and maintain example projects, reference designs, and integration guides, • Lead documentation strategy including user guides, API references, release notes, and onboarding materials, • Collaborate with hardware, FPGA, embedded, and applications engineering teams to ensure cohesive platform delivery, • Gather customer feedback and translate it into actionable product improvements, • Drive improvements in usability, tooling, and automation, • Ensure reproducibility, maintainability, and quality across releasesJOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, Computer Science, or a related technical field, • 5+ years of experience in embedded systems or FPGA-based platforms, • Strong experience with board support packages (BSPs), embedded Linux, or RTOS environments, • Proficiency in C/C++ and familiarity with firmware development workflows, • Experience with version control systems (Git), CI/CD pipelines, and source code release management, • Strong understanding of hardware/software interfaces in FPGA or SDR systems, • Ability to think from the customer’s perspective and design intuitive engineering workflowsPREFERRED EXPERIENCE, • Direct experience with SDR, RF systems, or space communications hardware, • Proven track record designing SDKs or developer platforms, • Familiarity with Yocto, Buildroot, or similar embedded Linux build systems, • Experience writing technical documentation for external customers, • Experience supporting external engineering teams or customers, • Knowledge of export control and secure code distribution practices CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJob Description Principal Package Design Engineer Location: Hybrid at main Renesas Electronics America locations (San Jose, CA / Austin, TX) Department: Semiconductor Power Product Group Reports To: Senior Principal, Device Design Packaging Technology, Strategy, Operations Position Summary We are seeking a Principal Package Design Engineer to lead the development and integration of next-generation packaging solutions for high-performance semiconductors and electronic products. This role will focus on advanced package architecture, assembly processes, thermal and mechanical reliability, and cross-functional collaboration with design, applications, product engineering, manufacturing, suppliers, and quality teams. The ideal candidate has deep expertise in semiconductor packaging technologies and a strong track record of bringing complex products from concept through qualification and high-volume production. Key Responsibilities Lead Advanced Packaging Initiatives: Lead the design, development, and qualification of advanced semiconductor packaging solutions, including: Flip-chip, Chip Embedding Wafer-level packaging (WLP/FOWLP) Panel-level packaging (laminate, molding) 2.5D/3D packaging System-in-package (SiP) Ball grid array (BGA/CSP) Wafer-to-wafer and die-to-wafer heterogeneous bonding Architecture & Simulation: Define package architecture based on electrical, thermal, mechanical, reliability, and cost requirements with hands-on, deep simulation expertise. OSAT & Vendor Strategy: Drive package technology and OSAT selection and development for new product introductions (NPI). Cross-Functional Collaboration: Work closely with IC design, product definers, substrate, board, thermal, reliability, applications, and manufacturing teams to ensure package compatibility and performance. Layout & Stack-Up: Oversee package layout reviews, stack-up definition, material selection, and interconnect strategy. Simulations & Modeling: Perform and guide others on simulations and analysis related to: Signal integrity / power integrity Thermal performance Mechanical stress / warpage Design for manufacturability (DFM) Assembly & Qualification: Develop assembly flows and process requirements for OSATs and manufacturing partners. Lead package qualification activities, including DOE planning, failure analysis, and reliability testing. Yield & Issue Resolution: Resolve packaging-related issues and challenges during NPI prototype builds, qualification, and production ramp. Collaborate with suppliers and internal/external manufacturing partners on process improvements, material evaluation, and yield optimization. Documentation & Leadership: Create and maintain package specifications, design rules, process documentation, and technical reports. Mentor junior engineers and provide technical leadership across packaging initiatives. Qualifications Required Qualifications Education: MSc or PhD degree in Electrical Engineering, Materials Science, Mechanical Engineering, Chemical Engineering, or a related field. Experience: 5+ years of experience in advanced semiconductor packaging or advanced electronics packaging and system integration. Technical Depth: Strong hands-on knowledge of advanced packaging technologies, materials, assembly processes, and application system integration as they apply to AI infrastructure and data center power management. Reliability & Tools: Deep understanding of thermal, mechanical, and electrical interactions in package design and extensive, hands-on model setup, simulations, and analysis. Strong background in CAD and simulation tools. Experience with package reliability testing and qualification standards. Supply Chain: Experience working with OSATs, substrate vendors, assembly houses, and semiconductor supply chains. Problem Solving & Leadership: Proven ability to troubleshoot packaging failures, drive root cause/corrective action, and demonstrate strong project leadership and cross-functional communication skills. Preferred Qualifications Master’s or PhD in a relevant engineering discipline. Experience with power semiconductor devices and packaging including Si/SiC/GaN MOSFETs, Power Modules, Intelligent Power Modules, and their applications in consumer, industrial, automotive, and high-performance computing markets. Experience with power products in high-performance computing, AI/ML hardware, or mobile products. Hands-on experience with tools for package design and simulation such as: Cadence Allegro Package Designer SolidWorks ANSYS COMSOL JMP / Minitab Knowledge of JEDEC standards, IPC standards, and semiconductor qualification methods. Experience in W2W, D2W, D2D 3D heterogeneous integration and chiplet-based packaging. Key Skills Advanced package concept engineering and design Materials selection and development Thermal and mechanical simulations and analysis Failure analysis & reliability engineering Design for Manufacturability (DFM/DFX) Process development & supplier collaboration Technical leadership & problem-solving Success in This Role A successful Principal Package Design Engineer will: Deliver robust package solutions that meet performance, reliability, and cost targets. Enable smooth product transfer from concept to development to manufacturing. Reduce packaging risks through strong technical analysis, hands-on simulations, and qualification planning. Improve yield, quality, and manufacturability through collaboration with internal and external partners. Working Conditions May require occasional travel to supplier, OSAT, or design/manufacturing/R&D sites. Additional Information Renesas is an embedded semiconductor solution provider driven by its Purpose, To Make Our Lives Easier. With a global team of over 21,000 engineers and problem solvers in more than 30 countries, we offer the opportunity to work on world‑leading technology for Automotive, Industrial, Infrastructure, and IoT, shaping a safer, healthier, greener, and smarter future. At Renesas, TAGIE is our culture, grounded in being Transparent, Agile, Global, Innovative, and Entrepreneurial. It shapes how we work, grow and deliver on our purpose together. This collaborative spirit and mindset drive our semiconductor technology to transform industries and impact millions of lives. We believe in rewarding our employees with a competitive benefits package alongside their salary. More information will be provided during the hiring process. Are you ready to join our team and shape the future with us? Renesas Electronics is an equal opportunity and affirmative action employer, committed to supporting diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by law. For more information, please read our Diversity & Inclusion Statement. Renesas Electronics deals with dual-use technology that is subject to U.S. export controls regulations. Under these regulations it may be necessary for Renesas to obtain U.S. government export license prior to release of technology to certain persons. The decision whether or not to file or pursue an export license application is at the sole discretion of Renesas.

Job DescriptionJob Description HYBRID Applicants for this position must be currently authorized to work in the United States on a full-time basis. Renesas is unable to sponsor applicants for work visas for this position now or in the future. Seeking an experienced Product Engineer (PE) to own the technical readiness, manufacturability, and lifecycle performance of advanced power modules from New Product Introduction (NPI) through high-volume production and sustaining. This role is accountable for end-to-end product execution across design, test, quality, assembly, and manufacturing to deliver performance, quality, cost, and schedule targets at scale. Renesas Electronics, a leading global semiconductor company, is rapidly scaling its AI-focused power delivery business. Products include high-performance digital power VRMs, multiphase controllers, Smart Power Stages (SPS), Vertical Power Stages (SPS with integrated capacitors and multiple silicon die), Power Towers (power modules integrating multiple SPS-equivalents with capacitors and inductors), and power MOSFETs. Key Responsibilities Own product engineering execution for advanced power modules from NPI through high-volume production and sustaining Own the manufacturability of advanced power modules, driving robust assembly processes across OSAT and internal manufacturing sites Establish and enforce assembly workmanship standards, ensuring compliance with IPC-A-610 (Acceptability of Electronic Assemblies) Drive cross-functional alignment across Design, Test, Quality, and Manufacturing to enable scalable, high-yield module production Lead resolution of assembly-related excursions, including die attach, clip attach, solder integrity, and module-level defects Lead product bring-up, characterization, and silicon readiness in partnership with Design, Test, and Applications teams Define and maintain product specifications, limits, and guard-bands based on silicon behavior and manufacturing capability Lead yield analysis, parametric trend monitoring, and root-cause investigations Drive cost, yield, and cycle-time improvement through data-driven analysis Own manufacturing release, qualification execution, and product change management (PCNs) Serve as the technical escalation owner for production issues, customer returns, and corrective actions Support critical customer engagements on product, quality, and manufacturing topics as needed Qualifications Education: Bachelor’s degree required in Electrical Engineering, Computer Engineering, or a related field; master’s degree in a relevant engineering discipline preferred. Mechanical Engineering degree preferred, particularly for roles involving module packaging, thermomechanical behavior, and assembly optimization. Experience & Skills: Applicants for this position must be currently authorized to work in the United States on a full-time basis. Renesas is unable to sponsor applicants for work visas for this position now or in the future. 8+ years of experience in semiconductor product engineering, manufacturing engineering, or test engineering, with demonstrated ownership from NPI through high-volume production Strong technical depth in semiconductor power products and advanced power module manufacturing Strong data analysis skills with the ability to interpret statistical results and drive decisions Working knowledge of new product development, qualification, and high-volume manufacturing transfer Strong written and verbal communication skills with customers and cross-functional teams Proven ability to lead complex technical decisions, escalations, and execution across organizations Additional Information Renesas is an embedded semiconductor solution provider driven by its Purpose, To Make Our Lives Easier. With a global team of over 21,000 engineers and problem solvers in more than 30 countries, we offer the opportunity to work on world‑leading technology for Automotive, Industrial, Infrastructure, and IoT, shaping a safer, healthier, greener, and smarter future. At Renesas, TAGIE is our culture, grounded in being Transparent, Agile, Global, Innovative, and Entrepreneurial. It shapes how we work, grow and deliver on our purpose together. This collaborative spirit and mindset drive our semiconductor technology to transform industries and impact millions of lives. We believe in rewarding our employees with a competitive benefits package alongside their salary. More information will be provided during the hiring process. Are you ready to join our team and shape the future with us? Renesas Electronics is an equal opportunity and affirmative action employer, committed to supporting diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by law. For more information, please read our Diversity & Inclusion Statement. Renesas Electronics deals with dual-use technology that is subject to U.S. export controls regulations. Under these regulations it may be necessary for Renesas to obtain U.S. government export license prior to release of technology to certain persons. The decision whether or not to file or pursue an export license application is at the sole discretion of Renesas.

Job DescriptionJob Description The Package Development Engineer is responsible for developing, qualifying, and industrializing semiconductor package solutions that meet product performance, reliability, manufacturability, cost, and schedule requirements. This role works closely with cross-functional teams, including silicon design, package design, manufacturing, reliability, quality, and OSAT partners to bring new package technologies from concept through high-volume manufacturing. The ideal candidate combines strong semiconductor packaging expertise with a hands-on, problem-solving mindset and the ability to drive complex technology development activities in a global environment. Qualifications • Bachelor's degree in Packaging Engineering, Mechanical Engineering, Materials Science, Chemical Engineering, Physics, Electrical Engineering, or a related technical discipline., • Minimum 5+ years of experience in semiconductor package development, package integration, or advanced packaging technologies., • Strong knowledge of semiconductor assembly processes, including,, • Wafer backgrind, • Wafer dicing, • Die attach, • Flip-chip assembly, • Wire bonding, • Underfill, • Encapsulation and molding, • Ball attach, • Package singulation, • Surface-mount technology (SMT), • Experience developing and qualifying semiconductor packages in collaboration with OSAT partners., • Knowledge of Design of Experiments (DOE), statistical analysis, and structured problem-solving methodologies., • Experience conducting package reliability testing, failure analysis, and root-cause investigations., • Strong analytical, project management, and communication skills., • Ability to work independently and effectively within cross-functional global teams. Preferred Qualifications • Master's degree or Ph.D. in Packaging Engineering, Mechanical Engineering, Materials Science, Physics, Chemistry, or a related field., • Experience with advanced packaging technologies such as:, • Flip-Chip CSP (FCCSP), • System-in-Package (SiP), • Fan-Out Packaging (FOPLP/FOWLP), • Wafer-Level Packaging (WLP/WLCSP), • 2.5D/3D Packaging, • Knowledge of package thermal, mechanical, and electrical characterization techniques., • Experience supporting automotive-grade product qualification and reliability standards., • Knowledge of sustainability initiatives, packaging materials selection, and cost optimization techniques. Education/Experience: Ph.D. - 2 plus years relevant industry experience Master's Degree - 5 plus years relevant industry experience Bachelor's Degree - 7 plus years relevant industry experience Key Competencies: • Strong technical problem-solving skills, • Engineering rigor and attention to detail, • Innovation and research mindset, • Project ownership and execution, • Cross-functional leadership, • Vendor and supplier management, • Effective technical communication, • Ability to thrive in a fast-paced development environment, • Continuous learning and improvement orientation Additional Information Renesas is an embedded semiconductor solution provider driven by its Purpose, To Make Our Lives Easier. With a global team of over 21,000 engineers and problem solvers in more than 30 countries, we offer the opportunity to work on world‑leading technology for Automotive, Industrial, Infrastructure, and IoT, shaping a safer, healthier, greener, and smarter future. At Renesas, TAGIE is our culture, grounded in being Transparent, Agile, Global, Innovative, and Entrepreneurial. It shapes how we work, grow and deliver on our purpose together. This collaborative spirit and mindset drive our semiconductor technology to transform industries and impact millions of lives. We believe in rewarding our employees with a competitive benefits package alongside their salary. More information will be provided during the hiring process. Are you ready to join our team and shape the future with us? Renesas Electronics is an equal opportunity and affirmative action employer, committed to supporting diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by law. For more information, please read our Diversity & Inclusion Statement. Renesas Electronics deals with dual-use technology that is subject to U.S. export controls regulations. Under these regulations it may be necessary for Renesas to obtain U.S. government export license prior to release of technology to certain persons. The decision whether or not to file or pursue an export license application is at the sole discretion of Renesas.

Job Description Who we are: Formic is on a mission to reshape American manufacturing by making automation accessible to every factory. As labor constraints rise, costs increase, and global competition intensifies, automation is no longer optional for manufacturers that want to stay competitive. We deliver automation through a Robotics-as-a-Service model that combines industrial robotics, proprietary software, and full-service support into a single, integrated solution. By removing the traditional barriers of cost, complexity, and risk, we enable manufacturers to deploy automation quickly and realize measurable gains in throughput, safety, and operational efficiency without large upfront capital investment. Backed by leading investors including Lux Capital, Initialized Capital, Blackhorn Ventures, and Mitsubishi HC Capital North America, Formic is scaling rapidly and building the foundation for a new era of high-performance, Made in America production. About the team: The Fleet Operations Team drives uptime and operational performance across Formic's growing fleet of deployed robotic systems. Working inside live manufacturing environments, the team diagnoses issues, restores production, and continuously improves system reliability at scale. Fleet Operations operates at the intersection of robotics, controls, and real-world factory execution, ensuring Formic's automation delivers consistent, measurable performance across diverse industrial applications. About the role: As a Robotics Field Service Engineer, you are the front line of technical ownership across Formic's deployed robotic cells. You will diagnose failures, restore systems to production, perform preventative and corrective maintenance, and represent Formic directly within customer facilities. This is a hands-on, high-accountability role in uptime-critical environments. Success requires strong troubleshooting discipline, calm execution during production interruptions, and structured documentation. Your work directly impacts fleet performance, customer satisfaction, and long-term system reliability. In this role you will: • Perform preventative, corrective, and predictive maintenance on robotic manufacturing cells, • Respond to remote and on-site escalations, diagnose root causes, and restore systems quickly, • Provide hands-on technical support to customer operators and maintenance teams, • Log service activity, asset updates, and spare part requirements in CMMS systems, • Coordinate field scheduling and support with customers, vendors, and internal stakeholders, • Monitor system performance remotely using Formic dashboards and fleet tools, • Document service work, root cause analysis, and follow-up actions with clarity and precision, • Identify recurring failure patterns and escalate systemic risks for broader improvement, • Build professional, trusted relationships with plant managers and site personnel, • Operate with strict adherence to safety standards, including LOTO and industrial compliance, • Participate in RCA sessions, audits, and continuous improvement initiatives, • Continuously expand technical depth across robotics, controls, networking, and industrial systems What makes you a great fit: • 3+ years of hands-on field service experience supporting robotic or industrial automation systems, • Strong troubleshooting skills across electrical, mechanical, PLC, or robotic control systems, • Ability to read electrical schematics, wiring diagrams, and pneumatic drawings, • Experience using CMMS platforms to track and report maintenance activity, • Comfortable with local travel up to 80% and overnight travel up to 50%, • Clear written and verbal communicator capable of producing structured service documentation, • Demonstrated commitment to safety and disciplined field execution Bonus points if you have: • Experience with 6-axis robot brands such as Fanuc, KUKA, Yaskawa, ABB, or Universal Robots, • Familiarity with palletizing, case packing, pick-and-place, or conveyor systems, • Experience in food, beverage, packaging, CPG, or other high-speed manufacturing environments, • Prior customer-facing field experience, • Spanish language proficiency Our Total Rewards: At Formic, we believe people do their best work when they feel supported both professionally and personally. That's why we offer a comprehensive benefits and perks package for full-time, U.S.-based team members, including: • Equity in Formic: Participate in our stock option program and share in the success of a fast-growing start-up backed by leading global investors, • Competitive & Uncapped Commission Structure: Designed to reward performance and impact in commission-eligible roles, • Comprehensive Healthcare Coverage: Medical, dental, and vision insurance through Blue Cross Blue Shield and Unum, with 99% of employee premiums covered and 75% coverage for dependents, with optional buy-up plans available, • Additional Insurance Benefits: FSA and DCFSA, life insurance, short-term disability, and long-term disability through Unum, all 100% employer-paid, • Employee Assistance Program (EAP): Fully funded by Formic, offering support when you need it most, • Paid Parental Leave Program: Up to 12 weeks of paid parental leave, • Company-sponsored 401(k): Invest in your future with our company-facilitated retirement savings plan, • Home Office Stipend: A one-time allowance for fully remote and hybrid employees to support an at-home or on-the-road work setup, • Monthly Cell Phone Reimbursement: Monthly stipend toward personal phone and internet expenses, • Paid Time Off: Take the time you need, when you need it. 15 days of paid time off, in addition to company holidaysCompensation Philosophy Formic's pay and equity packages are thoughtfully benchmarked against peer companies at a similar growth stage. Equity represents a meaningful part of our mutual investment: when Formic succeeds, so do you. This role is paid hourly with a posted range of $29–$44 per hour. Based on the nature of field service work - which consistently runs approximately 50+ hours per week including travel, site activity, and documentation - total annualized earnings typically range from $82,500 - $126,000, depending on experience, hourly rate, and actual hours worked. Overtime is paid in accordance with applicable federal and state law for all hours worked over 40 in a workweek. Hourly Rate: $29—$44 USD What we look for: We're building this company from the ground up, and every person we hire has an outsized impact on our culture, performance, and trajectory. While each team member brings unique strengths and perspectives, we look for people who align with our Operating Principles and embody them in action. If this sounds like you, Formic may be the right place for you! • Fearless Optimism: You make bold bets and default optimistic. You believe in the mission, aren't paralyzed by risk, and fear inaction more than failure. You see ambiguity as opportunity and bring energy to building what doesn't yet exist., • Create the Magic: You absorb complexity so customers don't have to. Whether your customer is external or internal, you focus on delivering experiences that are clear, fast, value-added, and outcome-driven. You don't say "not my job." You make things work., • Today, Not Tomorrow: You have a bias to action. You close the loop. You take extreme ownership. You understand that speed compounds, and you don't confuse activity with results., • Seek Truth: You think from first principles. You value data over ego and strong opinions loosely held. You're willing to challenge assumptions, including your own, in pursuit of the best answer., • Made of Rubber: You are resolute and adaptable. When things break or priorities shift, you rebound stronger. You treat setbacks as learning moments and move forward with grit., • One Formic: You operate without silos. You practice radical helpfulness, document clearly, and make clean handoffs. You assume positive intent and prioritize team success over individual credit. Equal Opportunity Employment: Formic is an equal opportunity employer. We do not discriminate on the basis of race, color, religion or religious creed, sexual orientation, gender, gender identity, marital status, family or parental status, disability, military or veteran status, or any other basis protected by law. All employment decisions are based on a person's merit, business needs, and role requirements. If you require further accommodations or have questions regarding accessibility of our roles, please reach out to careers@formic.co. AI Use: At Formic, fairness and transparency are at the heart of our hiring process. We use AI-powered tools in some interviews to help our teams evaluate candidate responses, but all final hiring decisions are made by humans. You can learn more about how AI is used in our recruitment process by reviewing our AI Hiring Disclosure linked here.

Job DescriptionJob Description Position: Packaging Engineer Location: Fremont, CA / Sparks, NV / Austin, TX (Onsite) Start Date: Immediate Interview Mode: Phone/Video Responsibilities: Lead end‑to‑end engineered packaging projects for Vehicle and Energy platforms. Collaborate with Design, Manufacturing, NPI, and Operations teams to gather and develop packaging requirements. Partner with Supply Chain and Logistics to enable efficient delivery of parts without compromising quality. Provide design direction for protective packaging containers, dunnage, and shipping racks (domestic & international). Apply CAD and technical design methods including datum structure, GD&T, and tolerance stack‑up analysis. Monitor KPIs and drive packaging standards and continuous improvement. Manage expendable to returnable packaging projects and sustainability initiatives. Oversee project budgets, risks, vendor selection, and change management. Qualifications: Bachelor’s degree in Manufacturing, Engineering, Packaging, Industrial Design, or equivalent. Strong CAD skills (Creo, SolidWorks) with experience in technical drawings, GD&T, and tolerance analysis. Familiarity with manufacturing processes such as machining, welding, and injection molding. Knowledge of materials including aluminum, steel, composites, and foam. Experience designing to standards such as ASTM and Mil‑Spec. Strong understanding of packaging testing and validation. Ability to manage multiple priorities while maintaining quality results. Excellent communication, risk management, and teamwork skills. Willingness to travel up to 30%. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Senior Mechanical Engineer PulseForge, Inc. · Austin, TX · On-site PulseForge builds pulsed-light manufacturing systems for electronics, semiconductor, energy, and advanced-materials production. Our systems create process windows that conventional thermal tools cannot reach, enabling customers to manufacture in ways that were previously not possible. We’re at the forefront of advanced manufacturing. Our next step is scaling the platform: larger process areas, higher throughput, tighter uniformity, continuous operation, and production-grade reliability. Mechanical engineering sits at the center of that work. We are hiring a senior mechanical engineer to help design the next generation of the platform and to establish how mechanical systems are developed, released, and maintained as we scale. This role carries broad technical ownership: the architecture, the design decisions, and the release calls, with visibility into the business context that shapes them. You will work with a small team, move quickly from concept to hardware, and see your designs operating in customer production environments. The Work You will design across the mechanical architecture of the platform: machined structures, high-voltage packaging, production racks, lamp heads, and quartz optics. You will also own precision mechanisms, cooling and fluid systems, web and conveyor handling, and the hardware that integrates our systems into customer production lines. You will work from physics and architecture through drawings, suppliers, assembly, test, field performance, and the next revision. This is not a design-only role. What You Own • Mechanical subsystems from architecture through production release and sustaining., • The approach, the materials, the suppliers, and the release decision., • When to calculate, when to prototype, when to test, and when to simulate., • The mechanical practices we adopt: drawing standards, review depth, and configuration control., • Close, deep collaboration with electrical, controls, software, manufacturing, and supply chain.

Job Description Job Summary Packaging Engineers work closely with our process, controls, and building system engineers to scope, layout, install, and commission packaging equipment lines for our food and beverage industry clients. Dennis Group is a design build engineering firm and general contractor that designs and builds food and beverage processing facilities. As such, our packaging engineers are involved with defining packaging equipment project requirements, estimating packaging equipment costs, creating packaging flow diagrams, providing onsite construction support, and start-up and commissioning of the packaging equipment. As a packaging engineer, your responsibilities will include, but not be limited to: Responsibilities • Developing design concepts, estimates and functional specifications for packaging lines, • Interpreting mechanical design requirements and customer specifications to ensure that all requirements are realized in the design of the packaging system, • Specification, purchase, installation and commissioning of packaging equipment, • On-site construction project coordination and management, • Machine and process design, • Preparation of machine testing requirements and procedures, • Preparation of equipment specification, purchase documentation as well as equipment / facility layout, • Surveying existing conditions, • Creating packaging flow diagrams, • Creating material balance, • Creating packaging matrix, • Creating equipment lists, • Assisting with equipment bid packages, • Understanding size and placement of control/electrical panels, • Creating design basis documents and scopes of work, • Producing basis of design documentation, • Preparation and advisement in manufacturing and packaging design principles including conveyance, wrapping, bagging, cartoning, filling, bottling, case packing and palletizing, • Assisting in process simulation, • Providing construction site support, • Observing rough-in construction compliance and plans, specs, and details (install support team member), • Assisting in sanitary design and warehouse design and layout, • Developing AutoCAD equipment layouts, • 0-3 years of work experience or schooling in preparation of machine testing requirements and procedures, • 0-3 years of work experience or schooling in manufacturing and packaging design principles including conveyance, wrapping, bagging, cartoning, filling, bottling, case packing and palletizing, • 0-3 years of work experience or schooling in machine and process design, • Researching packaging engineering best practices, • Supporting talent growth within our organization Required Education Skills and Experience • Bachelor’s degree in mechanical, packaging, industrial, or manufacturing engineering, • 0-3 years of work experience or schooling in scope, layout, install, and commissioning of packaging equipment lines., • Experience working for professional services, packaging, and food and beverage firms is a plus., • Proficiency with MS Office, MS Project, and familiarity with AutoCAD, • Excellent oral and written communication skills, • Intellectual curiosity and a positive, can-do, team-oriented attitude, • Strong problem solving, organizing, and time management skills, • Must meet Travel Requirement - On-site construction project coordination and management with travel requirements 50%+ of the year Physical Requirements • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift-up to 15 pounds at times. Travel Requirement • 50%+ travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Job Summary Dennis Group’s Process Engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process Engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities • Develop process design basis and select unit operations, • Develop operation specifications, • Coordinate with other project disciplines (engineers, designers, architects, etc.), • Prepare process flow and piping and instrumentation diagrams, • Create process flow diagrams, • Prepare mass and energy balances, • Size and specify process and process utility equipment, • Equipment procurement and bid evaluation, • Assist project management with the development of project scope, budget and schedule for all process related work, • Help to coordinate the schedules and work of contractors for process equipment installation, • Work with clients, vendors, and suppliers to develop cost estimates and proposals, • Provide client assumptions on supply recommendations, • Develop process and instrumentation drawings (P&IDs), • Oversee process and utility equipment installations, • Provide onsite construction start-up and commissioning support, • Research process engineering best practices, • Supporting talent growth within our organization Required Education Skills and Experience • Bachelor’s degree in Chemical or Process Engineering., • 0-3 years of work experience or schooling developing process designs, • 0-3 years of work experience or schooling preparing process flow diagrams and P&IDs, • 0-3 years of work experience or schooling sizing and specifying process and process utility equipment., • 0-3 years of work experience or schooling developing project scopes, budgets and process-related work schedules, • Co-op, intern or work experience with professional services, process engineering, and food and beverage firms is a plus, • Interest in food safety and sanitary design principles and a desire learn about various food and beverage industry standards, practices, and regulations, • Proficiency with MS Office, MS Project, and AutoCAD, • Excellent oral and written communication skills with proven client interaction and experience, • Must meet Travel Requirement - On-site construction project coordination and management with travel requirements between 30-50% of the year Physical Requirements • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift-up to 15 pounds at times. Travel Requirement • Up to 50% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Mythic is building next-generation AI hardware platforms that require tight integration between silicon, packaging, and system design. We are looking for a hands-on Senior Staff Systems Design Engineer to own and drive the design and implementation of our reference boards and hardware platforms. This is not a maintenance role. This is a build role. We want someone who can take evolving silicon capabilities, incomplete requirements, and system-level constraints and turn them into robust, manufacturable hardware designs. You will play a critical role in defining how Mythic delivers usable hardware platforms to customers and partners. This role is ideal for someone who thrives in high-ownership environments and wants to work across silicon, integration, and manufacturing to build high-quality hardware systems. You should be equally comfortable designing boards, working with external vendors, and supporting bring-up and debug. What you’ll own • Own design and development of reference boards and hardware platforms, • Translate silicon capabilities into practical, high-quality system designs, • Drive schematic design and guide PCB layout (internally or with external partners), • Own key hardware subsystems including power delivery, high-speed interfaces, and clocking, • Ensure signal integrity, power integrity, and overall system robustness, • Define and incorporate package-level constraints into board design, • Partner with OSATs and manufacturing vendors to ensure smooth package-to-board integration, • Support board bring-up and collaborate on debugging system-level issues, • Drive design for manufacturability (DFM) and readiness for prototype and production builds, • Work closely with integration, product, test, and packaging teams to ensure successful system deployment This role ensures Mythic’s silicon can be transformed into robust, manufacturable, and deployable customer-ready hardware platforms. What we’re looking for • Significant experience in hardware or board-level design, • Strong background in high-speed digital design and power delivery, • Experience designing and bringing up complex PCBs, • Familiarity with PCB design tools (Altium, Cadence, or similar), • Understanding of package-to-board interactions and system-level constraints, • Ability to operate in fast-moving, ambiguous environments, • Strong engineering judgment and attention to detail, • Experience working with external vendors (PCB, OSAT), • Builder mindset: you do not wait for perfect requirements — you create working systemsPreferred Qualifications, • Experience with AI/ML hardware or high-performance compute platforms, • Exposure to multi-die or chiplet-based systems, • Familiarity with thermal and mechanical considerations in hardware design, • Experience supporting hardware through bring-up and early productionWhat success looks like, • Reference boards are robust, reliable, and require minimal re-spins, • Hardware platforms are easy to use, stable, and ready for integration, • Designs account for real-world constraints early, reducing downstream issues, • Strong collaboration with integration, product, and manufacturing teams, • Smooth transition from prototype builds to manufacturable designsWhy this role matters At Mythic, hardware design is not just about schematics—it is how we deliver real, usable systems that showcase the full value of our silicon. This role is central to turning silicon into working platforms that customers and partners can build on. You will directly influence hardware quality, usability, and readiness for deployment. If you want a role where you can build real systems, make critical design decisions, and have direct impact on product success, we should talk. Compensation & Benefits • Competitive salary and equity, • Health, Dental, Vision, 401(k), • Uncapped PTO Why Mythic • Work on ambitious AI hardware with real system complexity, • Own critical hardware design at a company where your work directly impacts product delivery, • Join a highly collaborative team solving hard engineering problems, • Move fast, make decisions, and build from first principles, • Have outsized impact in a role with real scope and visibility At Mythic, we pride ourselves in creating a culture where all employees feel valued and appreciated for the diverse perspectives and backgrounds they bring to the team. We aim to hire smart people, give them the resources they need to do their job well, and then leave the rest up to them. We celebrate individual differences and encourage people to be comfortable bringing their authentic selves to work. At the end of the day, we are committed to building a diverse workforce where everyone belongs. Mythic is an equal opportunity and affirmative action employer. It ensures equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, veteran status, or any other characteristic protected by law. We look forward to reviewing your application!

Job Description Dennis Group’s Process Engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process Engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities • Develop process design basis and select unit operations., • Develop operation specifications., • Coordinate with other project disciplines (engineers, designers, architects, etc.), • Prepare process flow and piping and instrumentation diagrams, • Create process flow diagrams., • Prepare mass and energy balances, • Size and specify process and process utility equipment, • Equipment procurement and bid evaluation., • Assist project management with the development of project scope, budget, and schedule for all process related work, • Help to coordinate the schedules and work of contractors for process equipment installation., • Work with clients, vendors, and suppliers to develop cost estimates and proposals., • Provide client assumptions on supply recommendations., • Develop process and instrumentation drawings (P&IDs), • Oversee process and utility equipment installations, • Provide onsite construction start-up and commissioning support., • Research process engineering best practices, • Support talent growth within our organization Required Education Skills and Experience • Junior or Senior pursuing a Bachelor’s degree in Chemical Engineering or related field., • Familiarity with process flow diagrams and P&IDs is a plus., • Interest in food safety and sanitary design principles and a desire learn about various food and beverage industry standards, practices, and regulations., • Experience with MS Office, MS Project, and AutoCAD., • Past process experience in food and beverage, pharmaceutical, or other sanitary environments is a plus., • Have a motivated and results orientated attitude., • GPA: 3.0 or above, • Must meet Travel Requirement - On-site construction project coordination and management with travel requirements between 30-50% of the year Physical Requirements • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift-up to 15 pounds at times. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Mechanical Engineer II to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for mechanical designs of Cesium products through all phases of the development process. The ideal candidate will be proficient in electronics packaging design, mechanical simulations and analyses, computer-aided design (CAD), spacecraft mechanical interfaces, and environmental qualification of electronic assemblies. As a Cesium mechanical team member, you will be responsible for mechanical designs from initial concept design through requirements definition, detailed design, simulation, analysis, manufacturing, testing, qualification, and in-orbit support of Cesium's products. The ideal candidate will have skills and experience that include thermal management design, precision machining principles, thermal simulation and analysis, shock and vibration simulation and analysis, electromagnetic interference/compatibility (EMI/EMC) mitigation techniques, geometric dimensioning and tolerancing (GD&T), finite element analysis (FEA), and cost analysis to develop, validate, and optimize mechanical designs. The successful candidate may also present engineering design review materials to our customers and leadership team - excellent written and verbal communication skills are required. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Bachelor of Science (BS) and minimum of 2- 5 years of industry experience in design and analysis OR Master of Science (MS) and 0-3 years of industry experience in design and analysis, • Strong understanding of mechanical engineering principles, • Strong analytical, troubleshooting, and problem-solving skills., • Experience with CAD tools such as SolidWorks, CATIA, Creo, or AutoCAD, • Practical understanding of DFM/DFMA implications of material and process selection, • Knowledge of GD&T, drafting standards, and engineering documentation practices., • Experience with Engineering analysis tools such as (ANSYS, MATLAB, or similar), • Experience with CNC manufacturing, • Excellent written and verbal communication skillsPREFERRED EXPERIENCE, • Familiarity with electronics assemblies and experience working closely with electrical engineers., • Aerospace industry design, development, qualification, and aerospace manufacturing processes, • Experience in electronics packaging, including thermal, vibration, and stress dynamics or in spacecraft structures and mechanisms, • Experience with EMI/EMC mitigation techniques. CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

We are building Terafab, a vertically integrated semiconductor factory at an unprecedented scale. The facility houses logic, memory, packaging, test, and lithography mask production under one roof, optimized for rapid iteration and maximum compute density per square foot. We are seeking a highly driven Technical Program Engineer to join the Terafab core team, a high-leverage, multi-disciplinary team that owns the big picture for a first-of-its-kind fab build-out. You will be an extreme owner of the integrated program plan and schedule, responsible for setting targets, analyzing change impacts, identifying critical path enablers, and diving in to resolve technical problems that would otherwise delay the program. This role requires you to own problems across supply chain, construction, engineering, finance, and more. You will translate executive-level targets into actionable roadmaps across Terafab's global network of engineering, operations, supply chain, finance, construction, and partner teams. You will dive into short-cycle projects, be hands-on with the program, and personally accountable for removing blockers across the full lifecycle from development through production ramp. • Own end-to-end program plan and integrated schedule, building roadmaps with cross-functional inputs, setting production and cost targets, identifying critical path and bottlenecks, tracking execution, and systematically eliminating delays, • Take technical ownership of engineering problems across fab, process, construction, and production, • Manage critical partner relationships with construction teams, technology partners, equipment vendors, and design teams, • Own change impact assessment and change management for NPI and multi-fab production changes, • Execute critical path programs such as cost modeling, equipment procurement, supply chain deconfliction, and more, • Support program operations through on-call availability and rapid response to critical issues blocking construction, equipment installation, or production readiness, • Degree in Engineering, Computer Science, Operations Research, Physics, or equivalent experience, • 5+ years of experience leading large-scale, cross-functional programs such as NPI, production ramp, greenfield site bring-up, or technology transfer, • Proven ability to own and resolve technical problems, • Experience building program plans, integrated schedules, and executive tracking systems for multi-year programs, • Experience operating in high-ambiguity, fast-moving environments where processes don't exist and requirements change frequently, • Strong critical thinking and first-principles problem solving, • Self-directed mentality, • Ability to travel 20% of the time Benefits Along with competitive pay, as a full-time Tesla employee, you are eligible for the following benefits at day 1 of hire: • Medical plans > plan options with $0 payroll deduction, • Family-building, fertility, adoption and surrogacy benefits, • Dental (including orthodontic coverage) and vision plans, both have options with a $0 paycheck contribution, • Company Paid (Health Savings Accounts) HSA Contribution when enrolled in the High-Deductible medical plan with HSA, • Healthcare and Dependent Care Flexible Spending Accounts (FSA), • 401(k) with employer match, Employee Stock Purchase Plans, and other financial benefits, • Company paid Basic Life, AD&D, • Short-term and long-term disability insurance (90 day waiting period), • Employee Assistance Program, • Sick and Vacation time (Flex time for salary positions, Accrued hours for Hourly positions), and Paid Holidays, • Back-up childcare and parenting support resources, • Voluntary benefits to include: critical illness, hospital indemnity, accident insurance, theft & legal services, and pet insurance, • Weight Loss and Tobacco Cessation Programs, • Tesla Babies program, • Commuter benefits, • Employee discounts and perks program

We are seeking a Signal or Power Integrity Engineer to join our hardware team and contribute to SI/PI analysis and optimization of advanced packaging solutions for next-generation machine learning and data center ASICs. You'll work closely with senior engineers to help ensure our advanced packaging

Signal & Power Integrity Engineer to join our hardware team and drive the SI/PI analysis and optimization of advanced packaging solutions for next-generation machine learning and data center ASICs. We care about your career growth and strive to assign projects that help our team members develop your

Job Description Job Summary Dennis Group Process Piping Designers work heavily with process engineers and other engineering disciplines in designing multiple aspects of our food and beverage process facility projects. Responsibilities involve the layout of process and utility equipment in 2D equipment arrangements, creating Process Mechanical drawings using the 2D AutoCAD, 3D modeling of process and utility equipment, full 3D design of process and utility piping systems per P&IDs and Process Engineer(s) direction, creating piping drawings using the 3D models for bidding and construction purposes, equipment access and support platform design, pipe support systems, and extensive coordination of process piping and process mechanical designs with the entire facility design team. Other responsibilities include, but not be limited to: Responsibilities • Equipment Layout Design – 2D and 3D for food and beverage processing facilities, • Ability to plot drawings and create *.pdf format files, • Develop general 2D & 3D drafting and updating of drawings per “red line” mark-ups, • Platform Design – Conceptual design for review by Structural Engineer., • Piping and Instrumentation Drawing – Understanding of and ability to create, must be able to create piping drawings from PIDs and equipment arrangements., • Gather and organize information for developing design drawings; visit client sites as needed to understand existing equipment arrangements and piping systems., • Oversee all aspects and details of process and utility piping., • Perform basic CAD design work, • Communication Skills - Work with the architectural, structural, mechanical, electrical and control disciplines in the overall design coordination., • Prepare general arrangements, plans, elevations, isometrics and details for use in bid packaging and construction., • Modification of existing equipment layout drawings as directed by PM or Sr Designer, • Coordinate and distribute project workload to team members, • Take vendor information and accurately depict it on PM drawings, • Create multilevel equipment arrangements drawings, • Create 3D equipment arrangement drawings, • Create 3D piping models, • Create “SMART” PIDs, • Create simple AutoCAD based PIDs, • Contributes to developing DG CAD standards, • Participate in project team meetings with client, • Act as project design coordinator (clash detection, coordination with other disciplines and design firms to create coordinated model), • Work onsite directly with contractors, DG construction and engineering teams, • Produce drawings for bid packages, • Set up drawings (sheets to transfer project information to contractors, • Execute 3D model reviews with client using Navisworks., • Assist construction managers with coordination issues in the field., • Researching processing piping design best practices, • Supporting talent growth within our organization Required Education Skills and Experience • Associate Degree is required. A bachelor’s degree in an engineering-related filed is preferred., • 12+ years of work experience in piping and equipment layout for food and beverage processing facilities or similar production facilities., • Work experience in AutoCAD, • Work experience in 3D experience using CADWorx, Plant3D or similar programs, Revit piping experience., • Familiarity with XREFS and basic drawing setup, • Ability to interpret PIDs and transpose that information into a piping layout., • Experience with design of Food and Beverage processes a plus, • Travel to client construction sites will be required of this position, not less than 20% of the year. Physical Requirements • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift-up to 15 pounds at times. Travel Requirement • Approximately 25% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Job Summary Dennis Group Process Piping Designers work heavily with process engineers and other engineering disciplines in designing multiple aspects of our food and beverage process facility projects. Responsibilities involve the layout of process and utility equipment in 2D equipment arrangements, creating Process Mechanical drawings using the 2D AutoCAD, 3D modeling of process and utility equipment, full 3D design of process and utility piping systems per P&IDs and Process Engineer(s) direction, creating piping drawings using the 3D models for bidding and construction purposes, equipment access and support platform design, pipe support systems, and extensive coordination of process piping and process mechanical designs with the entire facility design team. Other responsibilities include, but not be limited to: Responsibilities • Equipment Layout Design – 2D and 3D for food and beverage processing facilities, • Ability to plot drawings and create *.pdf format files, • Develop general 2D & 3D drafting and updating of drawings per “red line” mark-ups, • Platform Design – Conceptual design for review by Structural Engineer., • Piping and Instrumentation Drawing – Understanding of and ability to create, must be able to create piping drawings from PIDs and equipment arrangements., • Gather and organize information for developing design drawings; visit client sites as needed to understand existing equipment arrangements and piping systems., • Oversee all aspects and details of process and utility piping., • Perform basic CAD design work, • Communication Skills - Work with the architectural, structural, mechanical, electrical and control disciplines in the overall design coordination., • Prepare general arrangements, plans, elevations, isometrics and details for use in bid packaging and construction., • Modification of existing equipment layout drawings as directed by PM or Sr Designer, • Take vendor information and accurately depict it on PM drawings, • Create multilevel equipment arrangements drawings, • Create 3D equipment arrangement drawings, • Create simple AutoCAD based PIDs, • Set up drawings (sheets to transfer project information to contractors, • Execute 3D model reviews with client using Navisworks., • Assist construction managers with coordination issues in the field., • Researching processing piping design best practices, • Supporting talent growth within our organization, • Provide coaching and/or mentoring to a subordinate group when directed by supervisor. Required Education Skills and Experience • Associate Degree is required. A bachelor’s degree in an engineering-related filed is preferred., • 4-7 years of work experience in piping and equipment layout for food and beverage processing facilities or similar production facilities., • 4-7 years of work experience in AutoCAD, • 4-7 years of work experience in 3D experience using CADWorx, Plant3D or similar programs, Revit piping experience., • Familiarity with XREFS and basic drawing setup, • Ability to interpret PIDs and transpose that information into a piping layout., • Experience with design of Food and Beverage processes a plus, • Travel to client construction sites will be required of this position, not less than 25% of the year. Physical Requirements • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift-up to 15 pounds at times. Travel Requirement • 20% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Who we are: Farm Credit Bank of Texas is a $42.2 billion wholesale bank that has been financing agriculture and rural America for over 100 years. Headquartered in Austin, Texas, we provide funding and services to rural lending associations in five states, and we are active in the nation's capital markets. While you may not be familiar with our name, Farm Credit Bank of Texas plays a critical role in supporting the businesses that make it possible for America to maintain access to an affordable and safe food supply, an industry which is one of the most innovative and evolving of our time. And while you help us deliver on our mission, we deliver on our commitment to you as a valued employee by providing competitive compensation, generous health and wellness benefits packages and an attractive workplace located along the bluffs of the Colorado River just minutes west of downtown Austin. We seek out top talent in their fields, whether it be technology, finance, accounting, credit, human resources, or other administrative functions, and welcome you to join us in our mission to feed the world. Position Description: The End-User Computing Engineer is responsible for supporting, enhancing, and securing the Bank's End-User Computing (EUC) environment. This role serves as a technical resource for the implementation, management, optimization, and troubleshooting of enterprise desktop technologies, virtual desktop infrastructure, endpoint management platforms, and related end-user services. Working as part of the Information Technology team, the End-User Computing Engineer collaborates closely with Customer Support, Infrastructure Services, Information Security, and other technology teams to maintain reliable, secure, and efficient EUC services. The role provides advanced technical expertise, third-tier support, and engineering solutions that improve system performance, strengthen security, and enhance the overall user experience. The position focuses on ensuring the availability, scalability, and security of the Bank's endpoint computing environment through proactive administration, automation, and continuous improvement. The End-User Computing Engineer leverages technical expertise to support modern workplace technologies, streamline operations, and deliver solutions that align with the Bank's business objectives and technology strategy. Operating with a high degree of ownership and accountability, the End-User Computing Engineer identifies improvement opportunities, resolves complex technical issues, implements technology enhancements, and helps ensure that employees have secure and reliable access to the systems and tools they need to perform their work effectively. Day-to-Day Duties and Responsibilities: • Monitor and maintain enterprise EUC services to ensure acceptable levels of performance, reliability, and availability., • Perform advanced troubleshooting, problem resolution, and preventative maintenance for desktop, endpoint, and virtual desktop technologies., • Provide third-tier technical support and technical guidance to Customer Support and other IT teams., • Administer and support desktop operating systems, endpoint management platforms, mobile devices, and related technologies., • Enhance system security through endpoint hardening, vulnerability remediation, configuration management, and security-focused engineering practices., • Develop, maintain, and improve technical documentation, standards, procedures, and operational support materials., • Create and maintain automation solutions and scripts that improve efficiency, reduce manual effort, and optimize operational processes., • Manage assigned EUC systems and services, ensuring consistent performance, support, maintenance, and lifecycle management., • Track work requests, operational activities, incidents, and project tasks through the Bank's IT service management processes., • Communicate infrastructure updates, maintenance activities, and technology changes to management, support teams, and end users as appropriate., • Support operating system and application deployment, patching, packaging, and update management activities., • Collaborate with Information Security, Infrastructure Services, and application teams to support technology initiatives, compliance requirements, and continuous improvement efforts., • Participate in the evaluation, testing, and implementation of new technologies that improve the employee computing experience and support the Bank's strategic objectives. What You Bring to the Team: Our ideal candidate has experience supporting enterprise end-user computing environments and enjoys working in a collaborative, customer-focused technology organization dedicated to continuous improvement and operational excellence. This role requires a combination of endpoint engineering, systems administration, automation, troubleshooting, and customer service expertise, including: • Associate's degree, technical school certification, or equivalent technical experience., • Professional certifications in Microsoft, Omnissa, VMware, or related technologies preferred., • Three (3) or more years of experience as a Systems Administrator, Systems Engineer, End-User Computing Engineer, or similar technology role., • Equivalent combinations of education, certifications, and experience may be considered., • Experience administering enterprise Windows environments, desktop platforms, and endpoint management solutions., • Strong troubleshooting, root cause analysis, and problem-solving skills with the ability to resolve complex technical issues., • Experience supporting desktop operating systems, mobile devices, endpoint security, and end-user productivity tools., • Strong verbal and written communication skills with the ability to explain technical concepts to both technical and non-technical audiences., • Ability to manage multiple priorities while maintaining a high level of service, accuracy, and attention to detail., • Demonstrated ability to work independently while effectively collaborating across cross-functional technology teams., • Commitment to operational excellence, continuous learning, and delivering high-quality technical support and engineering solutions. Preferred: • Bachelor's degree in Information Technology, Computer Science, Information Systems, or a related field., • Experience with PowerShell scripting, automation, and systems management tools., • Experience supporting virtual desktop infrastructure (VDI), including Omnissa Horizon, VMware Horizon, or Azure Virtual Desktop environments., • Familiarity with Infrastructure as Code (IaC), CI/CD pipelines, and automated platform management., • Experience with endpoint security technologies, vulnerability management, and remediation programs., • Experience supporting Windows 11, Microsoft 365 applications, and modern workplace technologies., • Experience with Windows Autopilot, device provisioning, and modern desktop deployment methodologies., • Experience administering cloud-based computing environments, including Microsoft Azure., • Experience with Digital Employee Experience (DEX) monitoring solutions such as ControlUp., • Experience supporting collaboration and conferencing technologies including Microsoft Teams Rooms, Cisco Webex, and related platforms., • Experience working within regulated financial services, banking, or highly controlled technology environments. Why Farm Credit Bank of Texas: In addition to a competitive salary, we offer comprehensive, affordable, and competitive benefit options that are focused on health and wellness, financial security, and achieving a work-life balance: • Flexible health-and-wellness benefits, including medical insurance, prescription drug coverage, dental insurance, vision care, flexible spending accounts, and more., • 401(k) plan that includes immediate vesting of a generous employer match and additional employer contribution., • Long-term disability and life insurance., • Vacation leave, sick leave, and paid holidays., • Fertility benefit and parental leave plan., • Up to two days per year to volunteer in local community organizations, services, or events., • Ongoing professional-development opportunities., • Generous tuition-reimbursement program., • Physical fitness incentive plan., • Employer matching gifts program. Important note: We care about your hiring process and take it seriously. A real person will review your applications, meaning response timelines may vary. The interviewing process at Farm Credit Bank of Texas may include phone calls and emails, on-site interviews, and requests for portfolios or demonstrations of work. We can't personally follow up with each applicant, and we will do our best to create a professional, respectful, and thorough process for candidates with whom we identify as a potential fit. A/EOE/M/F/D/V