Trabajos painter en Houston, TexasCrear alertas

Job Description Industrial Painters are an important part of our manufacturing process. Must have experience with wet applications on industrial metal buildings and Epoxy primer and paint.

Job Description Full Time Permanent Opportunity with a well established Company near the Jersey Village area in Houston, Tx for an Industrial Painter with Specialized Coatings Experience We are seeking an experienced Industrial Coatings Technician with specialized knowledge of industrial painting systems and dual-component epoxy coatings in an industrialized or manufacturing setting Essential Duties: - Apply dual-component epoxy coatings to industrial components, including valves and pipelines. - Operate and maintain industrial coating application equipment and mixing systems. Prepare surfaces for coating application through cleaning, abrasive blasting, or other approved preparation methods. - Mix, handle, and apply two-component epoxy coating systems in accordance with manufacturer specifications. - Monitor coating thickness, coverage, curing, and overall application quality. - Inspect finished coatings for defects and ensure compliance with quality standards. - Previous experience with industrial painting systems and protective coatings. - Hands-on experience with dual-component epoxy coating systems is strongly preferred. - Familiarity with 3M Scotchkote 323+ coating systems or similar protective coatings used in valve and pipeline applications is highly desirable. -

Job Description Facility Location: Houston, TX 77041 (West Houston / Jersey Village Area) Job Schedule: Monday - Friday Job Shift: 7:00AM - 4:00PM Pay: $16.00 - $18.00 per hour Essential Duties and Responsibilities • Selecting and mixing coating paints to desired color and prepare spraying equipment such as cleaning or adjusting spray guns., • Be capable of reading and understanding technical documents such as paint mixing procedures, and maintaining sprayer equipment as required., • Have the ability and desire to become efficient with painting techniques, meet company productivity rates, maintain mil thickness, and learn all aspects of job as required., • Cleaning spraying equipment with solvent or other recommended cleaning solutions daily., • Maintaining proper respirator care and operation and using the breathing air supply system when spraying epoxy paints., • Apply touchups or second coats., • Remove paint splatters when finished., • Mix, match, and apply paint, varnish, shellac, enamel, and other finishes. Qualifications • Ability to stay alert and pay attention to the task., • Must be self-motivated and a team player, • Able to work in a team environment., • Background check, drug screen, physical required. Additional Information • Physical Demand: Must be able to stand for long periods of time. Must be able to lift up to 50lbs unassisted., • Working Conditions: Warehouse/Shop Environment, • Shift Time/Overtime: Must be able to work various shifts and must be able to work OT as necessary., • Education: HS Diploma or GED Benefits At Nexus Disposal, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision and voluntary supplemental benefits. As well as company match on 401K, and more! Our employees also receive PTO and Holidays.

Job DescriptionDescription: The Powder Coat Painter is primarily responsible for spray painting. This includes verifying work orders for coating requirements. Essential Job Responsibilities not limited to: • Preparing: Pretreating, cleaning, masking, and priming parts, • Applying: Spraying powder coat onto surfaces, • Inspecting: Performing quality checks, including first piece, in-process, and final inspections, • Maintaining: Adjusting sprayer valves and nozzles, and maintaining and organizing the powder storage room, • Other: Loading and unloading parts, changing hanging patterns onto the carts. Then moving carts in and out of the ovenRequirements: Knowledge/Skills/Abilities: • Ability to read and interpret shop drawings, • Basic math knowledge which includes the use of measuring tools, • Familiar with mixing process of paint colors, • Operate a forklift Competencies • Ability to work in an environment that produces excellent quality and quantity work, • Ability to organize and prioritize jobs, • Ability to communicate – verbally and written Physical Requirements/Work Environment • Able to stand for long periods of time, • Able to lift, push, and pull 25 pounds unassisted, • Typical machine shop environment., • Willing and able to work additional hours as needed to ensure responsibilities are met., • Willing to be cross trained on different machines Minimum Qualifications • High School diploma or GED, • Shop experience spray painting, • Experience in disassembling spray gun and cleaning out lines, operating forklift and overhead crane ------------------------------------------------------------------------------------------------------------------------ At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals, • Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company — APPLY TODAY! ----------------------------------------------------------------------------------------------------------------------- We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job Description We are looking for an Automotive Painter to join our team! The Automotive Painter is responsible for painting vehicles from a variety of makes and models to customer specifications at a high level of skill and quality. If you have experience with automotive paint and are looking for a stable opportunity with no prospecting required, then this may be the job for you! Responsibilities: • Receive automotive inventory and review pre-approved paint work, • Mix paint and paint vehicles and panels as approved on the repair order, • Properly spray the application of primers, sealers, basecoats, and clearcoats, • Produce sprayed finishes with little or no dirt and a consistent gloss and texture,e matching the OEM finish with minimal to no need to sand and buff, • Blend and apply 2- and 3-stage colors as needed, • Work closely with prep staff and other painters to meet work demands as a team., • Partner with additional departments as applicable to ensure customer satisfaction, • Maintain company-provided tools and additional equipment in accordance with company standards. Requirements: • Previous experience in automotive paint, • Must be 18 years of age or older, • Must have a checking/savings account or pay card with routing numbers for direct deposit, • General understanding of automotive details and features., • Ability to sit, bend, squat, and hold various positions for long periods of time, • Strong communication skills., • Ability to prioritize tasks and set deadlines., • Ability to work well with multiple departments, • Motivated, personable, and a team player with a strong work ethic., • The ability to operate a manual transmission is a plus. If interested, please get in touch with Martin at (469)579-1540 or email martin@disautomotive.com Powered by JazzHR ZbABDyDbgJ

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking an experienced Painter Lead to support daily operations within our Paint Department. The Paint Lead will provide hands-on leadership, technical guidance, and support to paint team members while ensuring work is completed safely, efficiently, and according to quality standards. This role will assist with coordinating daily workflow, training team members, troubleshooting paint application issues, and ensuring finished products meet customer specifications. The ideal candidate will have strong industrial painting experience, attention to detail, and the ability to lead by example in a fast-paced manufacturing environment. Job Duties: • Provide daily direction and support to painters to ensure production goals and quality standards are achieved, • Assist with organizing workflow, prioritizing jobs, and communicating production needs to the Paint Supervisor/Manager, • Train and mentor new and existing employees on proper painting techniques, safety procedures, and department processes, • Perform surface preparation including cleaning, sanding, grinding, masking, stripping, and repairing surfaces prior to painting, • Set up and operate spray equipment to apply primer, paint, lacquer, sealer, enamel, and protective coatings, • Mix paints and coatings according to specifications while maintaining proper viscosity, color, and consistency, • Review work instructions, drawings, and specifications to verify correct colors, finishes, and coating requirements, • Inspect completed work for quality, consistency, and adherence to customer requirements, • Identify paint defects and assist with corrective actions, including sanding, blending, and refinishing, • Ensure proper handling, storage, and use of paints, chemicals, and painting supplies, • Assist with maintaining paint equipment, spray guns, tools, and work areas, • Promote safe work practices, including proper PPE use, ventilation requirements, and hazardous material handling, • Support continuous improvement efforts to increase efficiency, quality, and department performance, • Communicate production issues, material shortages, and quality concerns to leadership, • Operate lifting and moving equipment as needed to safely position materials and access work areas, • Perform hands-on painting duties while supporting team productivity, • Work in enclosed spaces and areas with extreme heat, dust, and paint fumes as required Requirements • 3+ years of industrial painting experience in a manufacturing or production environment, • Strong knowledge of paint preparation, mixing, spraying, and finishing techniques, • Experience operating spray guns and other painting equipment, • Ability to read and interpret drawings, work instructions, and paint specifications, • Strong attention to detail and commitment to producing quality workmanship, • Ability to troubleshoot painting issues and recommend solutions, • Demonstrated ability to provide guidance and support to team members, • Strong communication and organizational skills, • Ability to work independently while supporting team objectives, • Preferred Qualifications:, • Previous lead, trainer, or senior painter experience, • Experience painting metal components, electrical control panels, or industrial equipment, • Knowledge of industrial coatings, epoxy paints, primers, and protective finishes, • Experience in a custom manufacturing environment, • Familiarity with quality inspection processes and production documentation Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401K, profit sharing, and ESOP contributions, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description Texas Compression is a Houston-based mechanical and Industrial services contractor servicing customer across Texas, Louisiana and Oklahoma. We are currently looking for experienced local coating technicians for upcoming projects located in Harris, Galveston, Fort Bend and Brazoria Counties. Job duties include but are not limited to: • Surface preparation of various substrates using pressure wash, hand preparation, mechanical preparation and abrasive blast methods., • Properly mix and apply specialty coatings using brush, roller and spray methods., • Apply composite repair and specialty wrap systems., • Perform general plant maintenance., • Maintain accurate record keeping on work performed. Qualifications: • 2+ years previous experience is required as an industrial blaster / painter., • NACE CIP1 Certification or NCCER Task 7.1 thru 7.7 with performance Verifications. (NCCER Modules 61106 / 61207 / 61208 / 61206) Preferred., • Candidates must be comfortable working in abnormal operating conditions which consist of but are not limited to confined spaces or environments that pose immediate danger to life and health., • Candidates must be comfortable working in highly regulated, detail-oriented environment where strict adherence to rules and procedures are always required Requirement: • High School Diploma or GED Required., • Must have a valid driver's license and be able to pass our Driver Certification Program., • Must be able to Read, Write and Speak English Fluently., • 2 years' experience minimum., • Clear drug and alcohol screen., • Clear background check., • TWIC, Basic +, • Must have reliable transportation, • Able to carry up to 100 pounds., • Must be able to work 10-12+ hours Days. Texas Compression, LLC is an Equal Opportunity Employer

Job Description Overview Tradesmen International is immediately hiring experienced Journeyman Painters for projects located in the Houston, TX area. This is a first shift opportunity, and the pay rate is $18/hour based on experience plus $150/day per diem for Travelers 60+ miles from the job site. If you are a Painter and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: • Assist with the preparation and painting of de-energized electrical substations, • Apply coatings, • Fill and attend to the paint pot, • Move hoses, • Carry five-gallon paint pails and equipment, • Keep the work area clean Responsibilities • Pass a drug screen, and background check, • All PPE Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

Job Description We are seeking an Industrial Painter to prepare and paint metal equipment and components. The right candidate has prior hands-on painting experience, pays close attention to finish quality, and works safely in a production environment. Responsibilities • Prepare surfaces for painting by cleaning, sanding, masking, and removing debris or old coatings as needed., • Apply paint or protective coatings using the methods required for each job., • Inspect finished work for coverage and quality, and complete touch-ups when needed., • Keep tools and the work area clean and follow applicable safety procedures. Qualifications • Prior industrial, equipment, automotive, or similar painting experience preferred., • Familiarity with surface preparation and spray-painting equipment preferred., • Ability to follow work instructions and maintain consistent quality. COM194 Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services. Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionBenefits/Perks • Competitive Compensation, • Great Work Environment, • Career Advancement OpportunitiesJob SummaryWe are seeking an Automotive Body Painter to join our team! As an Automotive Body Painter, you will assist with paiting vehicles, managing multiple repair projects at once, and working closely with coworkers to ensure work is completed properly and on time. The ideal candidate has previous paint experience, excellent customer service and communication skills, and strong attention to detail. Responsibilities • Maintain strong lines of communication between yourself and the client throughout the whole process to build relationships and provide excellent customer service, • Refinish vehicles to the best of your ability, maintaining our high standards, • Work within the guidelines of various insurance guidelinesQualifications, • Previous auto body or paint experience desired, • Strong customer service skills, • Excellent attention to detail, • Familiarity with insurance guidelines desired

Job Description The Painter/Carpentry role involves applying expert painting techniques and performing precise woodwork installations primarily on residential projects. This position requires working independently with occasional travel to different sites, ensuring high-quality finishes and maintaining safety standards throughout project execution. Responsibilities • Apply painting to various surfaces with attention to detail, • Install woodwork and carpentry components accurately, • Select appropriate materials for each project, • Adhere to all safety regulations and compliance standards, • Maintain and care for tools and equipment, • Perform thorough cleanup after project completion Preferred Qualifications • 5+ years of experience in painting and carpentry, • High School Diploma or equivalent, • Proficient in painting and carpentry techniques, • Strong attention to detail and time management skills, • Knowledge of safety compliance and proper tool operation, • Good physical stamina and ability to work independently, • Effective teamwork skills when necessary\nCompany Description MLDC Management LLC is a Houston based company , as a company we offer 40 plus years of experience in the industry. We simply want to be different. We are currently expecting some new assignments and invite you to apply to see if our company and potential properties might be a good fit. MLDC Management LLC is a Houston based company , as a company we offer 40 plus years of experience in the industry. We simply want to be different. We are currently expecting some new assignments and invite you to apply to see if our company and potential properties might be a good fit.

Job DescriptionHotel PainterJob Description We are looking for a skilled and detail-oriented Painter to join our hotel maintenance team. The Painter will be responsible for maintaining and improving the appearance of guest rooms, public areas, back-of-house facilities, and other hotel premises through high-quality painting and finishing work. Key Responsibilities Perform interior and exterior painting of hotel rooms, corridors, lobbies, offices, restaurants, and other facilities. Prepare surfaces by cleaning, sanding, scraping, filling cracks, and applying primers where required. Mix and match paints, colors, and finishes according to hotel standards. Repair damaged walls, ceilings, doors, furniture, and other painted surfaces before painting. Apply paint, varnish, enamel, stains, and other finishes using brushes, rollers, and spray equipment. Ensure all painting work is completed neatly, accurately, and according to required quality standards. Protect furniture, flooring, fixtures, and hotel equipment from paint, dust, and damage during work. Maintain painting tools, equipment, and materials in good working condition. Identify areas requiring painting or touch-up and report maintenance requirements to the supervisor. Complete painting and maintenance tasks within assigned timelines. Follow all hotel safety, cleanliness, and maintenance procedures. Maintain a clean and organized work area at all times. Assist the Maintenance Department with other related tasks when required. Requirements Previous experience as a Painter, preferably in a hotel, resort, commercial building, or similar environment. Minimum 2–3 years of relevant painting experience. Good knowledge of painting techniques, surface preparation, and finishing. Ability to work with brushes, rollers, spray guns, and other painting equipment. Knowledge of different types of paints, primers, coatings, and finishes. Ability to identify and repair minor wall and surface defects. Good attention to detail and commitment to quality. Ability to work independently as well as part of a maintenance team. Physically fit and able to stand, bend, climb ladders, and work for extended periods. Good time-management and organizational skills. Ability to follow safety procedures and hotel standards. Previous hotel experience will be considered an advantage. Preferred Skills Knowledge of basic building maintenance. Experience with decorative painting and finishing. Ability to perform minor plastering, filling, and wall-repair work. Good communication and teamwork skills. Professional attitude and strong work ethic. Powered by JazzHR Ba2ZOjTlKS

Job Description A Residential Painter provides painting services for a construction company or an independent company. A Residential Painter requires the skills to paint the exterior and interior walls of residential properties properly. A Residential Painter is required to climb ladders, operate paint sprayers, and work with paintbrushes. They must also handle painting materials properly to ensure the homeowners’ safety, other painters, and themselves. Related Job Titles for Residential Painter • Painter, • Interior Painter, • Exterior Painter We have an available position for a committed and experienced Residential Painter to join our team. Our company provides the ideal home painting to our customers, and we are looking for a qualified applicant that will help continue our dedicated services. As our Residential Painter, you will be part of a company that takes pride in services and our employees. We recognize that the best way to have satisfied customers is to have satisfied employees. A candidate can expect to work alongside hard-working teammates that the company we are proud to acknowledge. Our Residential Painter continually respected and appreciated to perform at their best capabilities. To be a successful Residential Painter, a candidate must be dependable, knowledgeable, and professional. We work with people in their homes; our painters must provide a safe and healthy presence. You must be able to work in seasonal weather and physically handle the demand required for this position. Additionally, you must have an eye for detail and the ability to paint with precision. We are looking to bring on a Residential Painter who loves to make homes look beautiful and are proud of their craftsmanship. Residential Painter Duties & Responsibilities • Review painting tasks for each job, • Properly painting materials and equipment., • Ensure a safe working environment, • Correctly handle paint and ensure proper air ventilation., • Wear appropriate painting uniforms, • Wear all protective gear, • Manage and review painting supplies needed for each job, • Carefully cover any furniture to avoid paint spills., • Work effectively not to damage the client’s property., • Provide safe precautions to customers, • Properly clean up after every painting job., • Properly dispose of any painting materials., • Ensure all painting equipment and tools are in your possession, • Review painting work with the customer Residential Painter Requirements • High school diploma or GED, • Valid Drivers License, • Must be able to lift 5olbs, • Must be able to climb a ladder, • Must be able to handle light labor, • 1-2 years of painting experience, • Must be able to pass a background check, • Ability to work a paint sprayer, • Must be able to hold a paintbrush for continually hours, • No fear of heights\nCompany Description We do everything that has to do with residential remodeling We do everything that has to do with residential remodeling

Job DescriptionIndustrial Painter / Blaster Houston, TX 77039 Monday - Friday | 5:00 AM - 3:30 PM Starting Pay: $15.40/hr Overtime Available Join a Team That Builds Industry-Leading Products! Are you someone who enjoys hands-on work, takes pride in quality craftsmanship, and thrives in a manufacturing environment? We are looking for a dependable Industrial Painter / Blaster to join our production team! In this role, you will prepare machined castings for painting, apply protective coatings, and help ensure products meet the highest quality standards while working in a safe and team-oriented environment. What You'll Do: ✅ Clean, prep, and inspect machined castings prior to painting ✅ Apply paint and protective coatings according to specifications and quality standards ✅ Perform surface preparation activities including sanding, cleaning, masking, and material handling ✅ Operate tools and equipment safely and effectively ✅ Maintain a clean, organized, and safe work area ✅ Learn and follow proper machine shop procedures and safety requirements ✅ Assist with moving materials and products throughout the facility ✅ Support continuous production needs and meet daily production goals ✅ Follow company policies, procedures, and safety standards ✅ Perform additional duties as assigned What We're Looking For: ✔ Ability to lift and move materials weighing 50+ pounds with assistance when needed ✔ Comfortable standing, bending, squatting, climbing ladders, and performing physical tasks throughout the shift ✔ Ability to read, write, and communicate effectively in English ✔ Ability to read detailed work instructions and follow verbal directions ✔ Strong attention to detail and commitment to quality workmanship ✔ Reliable attendance and strong work ethic ✔ Willingness to learn manufacturing processes and forklift operation ✔ Ability to work overtime when required Why You'll Love This Opportunity: ⭐ Full-time stable schedule ⭐ Overtime opportunities available ⭐ Hands-on manufacturing environment ⭐ On-the-job training provided ⭐ Opportunity to grow your industrial skills and career ⭐ Safety-focused workplace with supportive leadership If you're ready to build a career in manufacturing and join a company that values hard work, quality, and teamwork, apply today!

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking an experienced Painter Lead to support daily operations within our Paint Department. The Paint Lead will provide hands-on leadership, technical guidance, and support to paint team members while ensuring work is completed safely, efficiently, and according to quality standards. This role will assist with coordinating daily workflow, training team members, troubleshooting paint application issues, and ensuring finished products meet customer specifications. The ideal candidate will have strong industrial painting experience, attention to detail, and the ability to lead by example in a fast-paced manufacturing environment. Job Duties: • Provide daily direction and support to painters to ensure production goals and quality standards are achieved, • Assist with organizing workflow, prioritizing jobs, and communicating production needs to the Paint Supervisor/Manager, • Train and mentor new and existing employees on proper painting techniques, safety procedures, and department processes, • Perform surface preparation including cleaning, sanding, grinding, masking, stripping, and repairing surfaces prior to painting, • Set up and operate spray equipment to apply primer, paint, lacquer, sealer, enamel, and protective coatings, • Mix paints and coatings according to specifications while maintaining proper viscosity, color, and consistency, • Review work instructions, drawings, and specifications to verify correct colors, finishes, and coating requirements, • Inspect completed work for quality, consistency, and adherence to customer requirements, • Identify paint defects and assist with corrective actions, including sanding, blending, and refinishing, • Ensure proper handling, storage, and use of paints, chemicals, and painting supplies, • Assist with maintaining paint equipment, spray guns, tools, and work areas, • Promote safe work practices, including proper PPE use, ventilation requirements, and hazardous material handling, • Support continuous improvement efforts to increase efficiency, quality, and department performance, • Communicate production issues, material shortages, and quality concerns to leadership, • Operate lifting and moving equipment as needed to safely position materials and access work areas, • Perform hands-on painting duties while supporting team productivity, • Work in enclosed spaces and areas with extreme heat, dust, and paint fumes as required Requirements • 3+ years of industrial painting experience in a manufacturing or production environment, • Strong knowledge of paint preparation, mixing, spraying, and finishing techniques, • Experience operating spray guns and other painting equipment, • Ability to read and interpret drawings, work instructions, and paint specifications, • Strong attention to detail and commitment to producing quality workmanship, • Ability to troubleshoot painting issues and recommend solutions, • Demonstrated ability to provide guidance and support to team members, • Strong communication and organizational skills, • Ability to work independently while supporting team objectives, • Preferred Qualifications:, • Previous lead, trainer, or senior painter experience, • Experience painting metal components, electrical control panels, or industrial equipment, • Knowledge of industrial coatings, epoxy paints, primers, and protective finishes, • Experience in a custom manufacturing environment, • Familiarity with quality inspection processes and production documentation Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401K, profit sharing, and ESOP contributions, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description Help Keep Cole’s Flea Market Looking Its Best Cole’s Flea Market, Pearland’s premier shopping and entertainment destination, is looking for a dependable and experienced Painter/Maintenance Technician to join our Maintenance and Site Services team. This hands-on position is ideal for someone who takes pride in quality workmanship, enjoys a variety of projects, and can work independently to help maintain a safe, welcoming, and well-kept property. Schedule: Monday–Friday, 8:00 a.m.–5:00 p.m. What You’ll Do • Prepare drywall, wood, metal, and other surfaces by cleaning, scraping, sanding, patching, and priming., • Apply paint using brushes, rollers, and airless spray equipment., • Mix and match paint colors, finishes, and textures., • Protect floors, fixtures, windows, and surrounding areas before beginning work., • Complete painting, touch-ups, and general upkeep throughout buildings, food stands, offices, warehouses, seller spaces, carts, rides, and fencing., • Assist with basic plumbing, electrical, carpentry, HVAC, and general maintenance projects., • Safely operate hand and power tools, pressure washers, ladders, scaffolding, and aerial lifts., • Track work orders, log hours, and communicate project updates., • Follow all safety procedures, including the proper use of personal protective equipment and disposal of hazardous materials., • Perform additional maintenance duties as assigned.What We’re Looking For, • Must be at least 18 years old., • Four years of painting, construction, facilities maintenance, or related experience is preferred., • Knowledge of surface preparation, paint application, color matching, and general repairs., • Valid driver’s license with an acceptable driving record., • Ability to use hand tools, power tools, and basic digital work-order platforms., • Dependable, organized, and able to solve problems independently., • Positive attitude and ability to communicate professionally with team members and management., • Willingness to follow all company policies and safety procedures.Physical Requirements, • Ability to stand and walk for extended periods., • Ability to bend, crawl, climb, crouch, kneel, reach overhead, push, and pull., • Ability to safely lift and carry tools and materials weighing up to 50 pounds., • Comfortable working in confined spaces and at elevated heights., • Ability to safely use ladders, scaffolding, and aerial lifts.Full-Time Benefits & Perks Eligible full-time team members may enjoy: • Medical insurance with 85% of the employee premium paid by the company., • Dental and Vision insurance with 100% of the employee premium paid by the company., • Employer-paid short-term and long-term disability coverage., • Employer-paid $25,000 basic life insurance policy., • 401(k) with employer matching contributions., • HSA employer contributions for eligible plans., • Optional FSA, accident, critical illness, hospital indemnity, medical gap, identity protection, pet insurance, and additional life coverage., • Paid holidays, vacation, and personal time off., • DailyPay available — access earned pay when needed., • Discounted meals on market days., • Free on-site parking., • Employee referral program, • ADP employee discounts., • NMFA scholarship opportunities. Apply today and put your painting and maintenance skills to work at Cole’s Flea Market! Cole’s Flea Market is an equal opportunity employer.

Job DescriptionResidential Painter Opportunity with Work Horse General Contractors Are you a skilled painter looking to bring your expertise to a trusted name in the Houston, TX area? At Work Horse General Contractors, we pride ourselves on delivering exceptional craftsmanship and attention to detail in every project we undertake. Join our team of dedicated professionals and help us transform residential spaces into stunning works of art. Responsibilities As a Residential Painter at Work Horse General Contractors, you will play a key role in enhancing the beauty and functionality of our clients' homes. Your day-to-day tasks will include preparing surfaces, applying paint, and ensuring a flawless finish. You’ll also be responsible for drywall repairs and finishing, ensuring that every project meets our high standards of quality. From start to finish, your expertise will contribute to creating spaces that our clients will love for years to come. Qualifications We’re looking for candidates who have experience in residential painting, drywall, and finishing. The ideal candidate will have a keen eye for detail, a strong work ethic, and a commitment to delivering outstanding results. Ready to bring your painting skills to a company that values quality and dedication? Apply today to join the Work Horse General Contractors team and help us make a difference in the homes of Houston! By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a dependable and motivated Painter Helper to support our painting and finishing operations. The Painter Helper assists experienced painters with preparing metal surfaces, cleaning and organizing work areas, masking components, handling materials, and preparing equipment for industrial painting. This position plays an important role in ensuring that our custom control panels and metal components meet Panelmatic's quality standards. The ideal candidate is detail-oriented, willing to learn, follows safety procedures, and can work effectively in a fast-paced manufacturing environment. Previous painting experience is preferred but not required for candidates who demonstrate a strong work ethic and willingness to learn. Job Duties: • Assist painters with preparing metal surfaces for industrial coatings, including cleaning, sanding, scuffing, and removing dirt, grease, and other contaminants., • Help mask equipment, panels, and components to protect areas that should not be painted., • Assist with mixing, staging, and handling paints, primers, thinners, and other coating materials under the direction of experienced painters., • Load, unload, move, and position parts and materials for painting and finishing operations., • Support painters with setting up, cleaning, and maintaining spray guns, hoses, tools, and other painting equipment., • Assist with applying primers, paints, sealers, and protective coatings as directed and trained., • Help inspect finished products for visible defects, missed areas, and overall coating quality., • Remove masking materials and assist with touch-ups and other finishing tasks as needed., • Maintain clean and organized painting areas, including proper storage of tools, supplies, and materials., • Follow established safety procedures when handling paints, solvents, chemicals, and painting equipment., • Wear required personal protective equipment, including respirators or other protective gear when necessary., • Follow instructions, production schedules, and quality standards to help meet departmental deadlines., • Assist with other fabrication, painting, and production duties as assigned. Requirements • High school diploma or equivalent preferred., • Previous experience in industrial painting, manufacturing, fabrication, or a similar environment preferred but not required., • Willingness to learn industrial painting techniques, surface preparation, masking, and finishing processes., • Ability to follow verbal and written instructions and comply with safety procedures., • Strong attention to detail and commitment to producing quality work., • Ability to work independently when directed and collaboratively as part of a production team., • Basic math skills and the ability to measure and handle materials accurately., • Good communication skills and a dependable work ethic., • Ability to use basic hand tools and learn to operate painting-related equipment., • U.S. work authorization without sponsorship required., • Ability to pass applicable pre-employment physical, drug screening, and background check requirements., • Ability to lift, push, and pull up to 75 pounds or more as required by the job., • Ability to stand, walk, bend, stoop, and reach for extended periods., • Ability to work in industrial environments that may include elevated temperatures, enclosed spaces, and heights above six feet, when required and with appropriate safety precautions., • Ability to wear required personal protective equipment for extended periods., • Alignment with Panelmatic's core values and commitment to safety, teamwork, and quality. Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401K, profit sharing, and ESOP contributions, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a dependable and motivated Painter Helper to support our painting and finishing operations. The Painter Helper assists experienced painters with preparing metal surfaces, cleaning and organizing work areas, masking components, handling materials, and preparing equipment for industrial painting. This position plays an important role in ensuring that our custom control panels and metal components meet Panelmatic's quality standards. The ideal candidate is detail-oriented, willing to learn, follows safety procedures, and can work effectively in a fast-paced manufacturing environment. Previous painting experience is preferred but not required for candidates who demonstrate a strong work ethic and willingness to learn. Job Duties: • Assist painters with preparing metal surfaces for industrial coatings, including cleaning, sanding, scuffing, and removing dirt, grease, and other contaminants., • Help mask equipment, panels, and components to protect areas that should not be painted., • Assist with mixing, staging, and handling paints, primers, thinners, and other coating materials under the direction of experienced painters., • Load, unload, move, and position parts and materials for painting and finishing operations., • Support painters with setting up, cleaning, and maintaining spray guns, hoses, tools, and other painting equipment., • Assist with applying primers, paints, sealers, and protective coatings as directed and trained., • Help inspect finished products for visible defects, missed areas, and overall coating quality., • Remove masking materials and assist with touch-ups and other finishing tasks as needed., • Maintain clean and organized painting areas, including proper storage of tools, supplies, and materials., • Follow established safety procedures when handling paints, solvents, chemicals, and painting equipment., • Wear required personal protective equipment, including respirators or other protective gear when necessary., • Follow instructions, production schedules, and quality standards to help meet departmental deadlines., • Assist with other fabrication, painting, and production duties as assigned. Requirements • High school diploma or equivalent preferred., • Previous experience in industrial painting, manufacturing, fabrication, or a similar environment preferred but not required., • Willingness to learn industrial painting techniques, surface preparation, masking, and finishing processes., • Ability to follow verbal and written instructions and comply with safety procedures., • Strong attention to detail and commitment to producing quality work., • Ability to work independently when directed and collaboratively as part of a production team., • Basic math skills and the ability to measure and handle materials accurately., • Good communication skills and a dependable work ethic., • Ability to use basic hand tools and learn to operate painting-related equipment., • U.S. work authorization without sponsorship required., • Ability to pass applicable pre-employment physical, drug screening, and background check requirements., • Ability to lift, push, and pull up to 75 pounds or more as required by the job., • Ability to stand, walk, bend, stoop, and reach for extended periods., • Ability to work in industrial environments that may include elevated temperatures, enclosed spaces, and heights above six feet, when required and with appropriate safety precautions., • Ability to wear required personal protective equipment for extended periods., • Alignment with Panelmatic's core values and commitment to safety, teamwork, and quality. Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401K, profit sharing, and ESOP contributions, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a skilled Painter to join our team. The Grinder/Polisher will be responsible for preparing metal surfaces by grinding, sanding, and polishing to ensure high-quality finishes on our custom control panels and other metal components. This role is critical in maintaining the quality and precision that Panelmatic is known for. Job Duties: • Immerse parts in solution or wash surfaces to remove grease, rust, scale, and dirt, • Set up and operate painting equipment to coat metal products with lacquer, paint, varnish, enamel, oil, or rustproofing material, • Prepare metal surfaces for painting, and paint equipment using brushes, spray guns, sanders, and rollers, • Mix chemicals and paints, fill tanks, control viscosity, thinner, and chemicals to mixture, • Determine flow and viscosity of paints and quality of coating visually or by use of viscometer, • Operate spray guns, position nozzles to direct spray onto the work piece, and regulate air pressure in spray guns that atomize spray, • Verify correct paint colors by reading building prints and designs, • Strip, sand, mask, and repaint surfaces, blend and polish finish to match surrounding areas, manually or using portable power tools, • Spray foam insulation and undercoating as required in buildings, • May install windows, door panes, handles, drains, or other accessories, • May use a full-face ventilation mask for extended periods of time, • Spray specified amount or thickness of primer, protective, decorative, or finish coatings, such as paint, lacquer, sealer, or enamel, onto prepared surfaces, using spray equipment, • May operate lifting and moving devices to move materials and equipment and access areas to be painted, • Must be able to work in enclosed spaces and extreme heat for extended periods of time Requirements • HS Diploma or equivalent required, • One year or more experience applying industrial coatings and or paint required, • Ability to do basic math and calculations required, • Ability to work autonomously without direct supervision required, • Analytical abilities and problem-solving skills required, • Excellent communication skills both written and verbal required, • US work authorization without sponsorship required, • Ability to pass physical, drug, driving, and background check required, • Ability to physically push, pull, and lift 75 lbs or more required, • Ability to sit, stand, and walk for four plus hours at a time required, • Ability to stoop and bend for four plus hours at a time required, • Ability to work at heights above six feet required, • Ability to work in enclosed spaces required, • Alignment with company core values required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401K, profit sharing, and ESOP contributions, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description Diversified Sourcing Solutions is seeking experienced Industrial Painters to work in a repetitive manufacturing shop environment. This role involves preparing surfaces through multiple finishing processes—shot blasting, sanding, and masking—and completing high‑quality paint applications on both component parts and fully assembled products. Key Responsibilities • Shot Blasting — Prep unpainted surfaces using a rail‑fed continuous shot blaster., • Pneumatic Sanding — Sand and prepare parts for paint application., • Masking — Tape and mask surfaces and components prior to painting., • HVLP & Pressure Pot Painting — Apply primer and topcoats using high‑volume, low‑pressure paint guns and pressure pots., • Clean and maintain sprayers, mixing containers, and all painting equipment., • Wear proper PPE, including respirators, and follow all safety procedures., • Maintain a clean, organized, and safe work environment. Minimum Qualifications, • 10+ years of experience using paint guns., • Experience with conventional paint guns and pressure pots., • Experience working with epoxy and polyurethane paints., • Ability to lift 75 lbs and stand for extended periods., • Must pass drug screening and background check. Preferred Qualifications, • Automotive Painting experience., • Experience applying zinc primer coatings. COMPENSATION: $36-$40 DOE **All employees must be prepared for a background check, 10 panel Drug screen and show proof of eligibility to work in the US. If you meet the qualifications of this position, please apply today! Diversified Sourcing Solutions is a national search firm that places top candidates with our top customers. We are an EEO Employer: Race, Color, Religion, National Origin, Sex, Disability, Age or any other classification protected by law. \nCompany Description Connecting Companies with Good Employees, and Employees with Good Companies!! Connecting Companies with Good Employees, and Employees with Good Companies!!

Job Description Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. We are seeking NCCER credentialed Painters with Rope Access - Level I, Level II, or Level III certification in the Houston, TX area. The Painter position performs surface preparation per specification to achieve proper adhesion on asset and applies protective coating on asset to achieve corrosion prevention, identification, hazard recognition, product purity, etc. Non-exempt role; Reports to the Foreman; Assigned duties according to specific procedures / work is checked frequently. Essential Qualifications: • Minimum of a High School Diploma or equivalent, • IRATA / SPRAT Level 1, Level 2, or Level 3 certification, • TWIC Card preferred, • Must have NCCER certification, • Preferred experience with industrial coatings operations and best practices, • Must have a capacity for work at height, • Must possess excellent communication, interpersonal, organizational, and problem solving skills, • CPR certification, • Post offer drug / alcohol screen, physical evaluation, and signed acceptance of the company Drug, Alcohol and Contraband Policy, • Comply with company and client job site safety requirements, • Must not pose a direct threat to the health or safety of others in the workplace Functional Requirements: Uses Industrial Rope Access methods and related equipment to access and complete a wide variety of maintenance, repairs and other industrial work tasks while suspended on ropes or in difficult access areas; responsibilities may also include rescue operations, technical reports, and administrative tasks; performs surface preparation per specification to provide proper adhesion of material; utilizes various methods for surface preparation, including but not limited to solvent, hand tools, power tools, pressurized water jet, abrasive blast cleaning, etc.; applies protective coatings to customer assets for corrosion prevention, identification, hazard recognition, product purity, etc.; utilizes various methods including brush/roll, conventional spray, single/plural component airless spray, hand trowel, thermal spray aluminum, etc.; perform additional assignments per supervisor's direction Compensation Final agreed upon compensation is based upon individual qualifications and experience. Benefits Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: May be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions; handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing / sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; seeing with or without correction; hearing with or without correction; wearing respirator and other PPE; typing / data entry; stepstool use; work in excessive heat; work in excessive cold; work in loud environment Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. Keywords: NDT technician, inspection, rope access, painter, painting Job Posted by ApplicantPro

Job Description Temporary Auto Body Painter/Trimmer Pay: $18.00/hr Schedule: Monday-Friday, 8:00 AM - 5:00 PM Assignment: Temporary We are seeking an experienced Auto Body Painter/Trimmer to join our team on a temporary assignment. Duties: • Prepare vehicles and parts for paint, • Apply paint and finishes to vehicles/components, • Trim and install vehicle moldings, panels, and related components, • Perform touch-ups and quality inspections, • Maintain a clean and safe work area Requirements: • Must have previous experience in automotive painting and trimming, • Ability to work independently and efficiently, • Reliable transportation and strong attendance, • Good attention to detail Apply today if you have the required experience and are ready to start immediately. \nCompany Description About us: Express works with job seekers to help find the right job for their skills and experience. We have a variety of jobs available, including full-time, part-time, and temporary positions. As one of the leading staffing companies in Houston, we’re ready to help you take the next step in your career. Express Employment Professionals is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. We are committed to the principle of equal employment opportunity for all people and to hire and promote individuals solely based on their qualifications for the job. In compliance with applicable federal, Texas and local law, employment decisions are based on business needs, job requirements, and an individual’s qualifications regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability, genetic information or protected veteran status. We do not tolerate discrimination About us:\n\nExpress works with job seekers to help find the right job for their skills and experience. We have a variety of jobs available, including full-time, part-time, and temporary positions. As one of the leading staffing companies in Houston, we’re ready to help you take the next step in your career.\n\nExpress Employment Professionals is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. We are committed to the principle of equal employment opportunity for all people and to hire and promote individuals solely based on their qualifications for the job.\n\nIn compliance with applicable federal, Texas and local law, employment decisions are based on business needs, job requirements, and an individual’s qualifications regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability, genetic information or protected veteran status. We do not tolerate discrimination

Job DescriptionPainter HelperPay Rate: $15.40 per hour Job Summary Responsible for cleaning and preparing machined castings for painting and applying required coatings according to specifications. This position requires physical stamina, attention to detail, and the ability to safely operate shop equipment while maintaining a clean and organized work environment. Job Responsibilities • Clean and prepare machined castings for painting., • Apply required coatings to meet product specifications and quality standards., • Safely handle and lift parts weighing over 50 pounds, with assistance when needed., • Stand, bend, squat, and work from ladders for extended periods., • Learn and safely operate machine shop equipment, including forklifts., • Maintain a clean, safe, and organized work area., • Follow all company policies, safety procedures, and instructions., • Perform other duties as assigned., • Work overtime as required. Qualifications & Physical Requirements, • Ability to lift up to 50 pounds, with assistance when needed., • Ability to stand, bend, and squat for extended periods (over one hour)., • Comfortable working from ladders when necessary., • Ability to speak, read, and write fluently in English., • Ability to follow written and verbal instructions., • Ability to read small print, with or without corrective lenses., • Willingness to learn machine shop equipment and forklift operation., • Commitment to workplace safety and quality standards.

Job Description Start Date Mid November About Us Kinetic Cutting Systems Inc. is a global leader in designing, manufacturing, and distributing high-end CNC plasma and laser cutting machinery. Built on engineering excellence and heavy-duty manufacturing, we are proud to expand our operational footprint with a new facility in Texas. Position Summary We are seeking a dedicated Industrial Painter / Shop Hand to join our production team in a full-time capacity. In this role, you will lead the surface preparation and spray painting of structural steel fabrications and machinery components, while also providing general support across our manufacturing workshop. Key Responsibilities • Prepare carbon steel fabrications and component parts for painting (de-greasing, grinding, sanding, and masking). Mix primers, epoxy/polyurethane coatings, and industrial paints to correct ratios and apply spray coats to high-quality standards., • Operate and maintain airless or conventional spray-painting equipment and spray booth systems., • Move, load, and stage raw steel materials and finished machinery components using overhead cranes and forklifts., • Operate hand and power tools to support assembly and general shop operations as needed. Qualifications & Experience • Industrial Painting Experience: 2+ years of experience in industrial wet spray painting, liquid coating application, or heavy equipment painting., • Surface Prep Skills: Knowledge of paint mixing ratios, viscosity testing, surface preparation standards, and masking techniques., • Tool & Equipment Literacy: Hands-on experience operating airless/air-assisted spray guns, grinders, and general shop power tools., • Forklift & Rigging: Forklift operator experience and crane/rigging experience preferred (OSHA Forklift Certification is a major plus)., • Physical Fitness: . Ability to lift up to 50 lbs, operate power tools, and work in a physically demanding metal shop environment, • Work Authorization: Must be legally authorized to work in the United States. What We Offer • Competitive hourly pay rate + overtime opportunities, • Comprehensive health, insurance package, • Matching 401 program, • Paid Time Off and Holidays

Job Description Industrial Powder Coater / Painter Position Type: Contractor Compensation: $19.00 / hour completion of a 90-day review, the position is eligible for an increased hourly pay rate based on meeting baseline accuracy without rework, speed, and attendance and cost-saving metrics Job Summary-We are seeking a physically strong, experienced Powder Coater and Forklift Operator to join our team in a fast-paced manual batch shop environment. In this role, you will be responsible for the full hands-on processing of fabricated metal parts—from operating a forklift to safely transport and stage heavy loads, to manual gun application and managing large batch oven cure cycles. Core Responsibilities: - Forklift Operation & Rigging: Safely operate sit-down forklifts to load, unload, transport, and stack heavy metal fabrications, raw materials, and finished goods throughout the shop and yard. - Heavy Surface Preparation: Manually wash, degrease, sand, or blast heavy steel and aluminum parts to ensure an optimal profile for powder adhesion. - Manual Racking: Lift, move, and hoist heavy or bulky metal parts onto batch carts, rolling racks, or overhead hooks using proper rigging procedures. - Precision Masking: Review shop drawings and orders to protect threads, machined surfaces, and high-tolerance areas using high-temperature tapes, plugs, and caps. - Electrostatic Powder Application: Utilize manual electrostatic spray guns to apply consistent, specified mil-thickness coatings on complex geometries, ensuring zero runs, thin spots, or cross-contamination. - Batch Oven Operations: Safely maneuver heavy rolling racks into industrial batch curing ovens. Monitor bake times and temperatures accurately according to substrate thickness. - Quality Control & Maintenance: Inspect cured fabrications for proper finish, gloss, and adhesion. Perform fast color changes, clean fluidizing hoppers, and manage spray booth filter maintenance. Qualifications & Requirements: - Forklift Experience: Minimum of 1–2 years of experience safely operating a forklift in an industrial manufacturing, fabrication, or warehouse setting (certification preferred). - Physical Stamina (Heavy Lifting): Must be physically capable of regularly lifting, pushing, pulling, and maneuvering heavy metal parts weighing up to 75+ lbs throughout an 8-to-10 hour shift. - Powder Coating Experience: Minimum of 1 year of experience in a manual batch powder coating shop or industrial spray painting environment. - Technical Knowledge: Basic understanding of manual batch oven cure cycles, mil-thickness testing, and proper handling of large steel fabrications. - Work Environment: Ability to thrive in a high-temperature industrial shop environment near large curing ovens, with constant physical activity. - Safety Compliance: Must comfortably and consistently wear all required Personal Protective Equipment (PPE), including a respirator, safety glasses, and steel-toed boots. 90-Day Performance Evaluation: based on performance, attendance, and quality metrics. to shop output efficiency and low reject/rework rates.

Job Description Introduction Bigge Crane and Rigging has been elevating America since 1916. With over 1,800 cranes and a coast-to-coast presence, we buy, sell, rent, operate, and maintain one of the largest, most advanced crane fleets in the country. We’ve played a role in building some of America’s most iconic landmarks and earned a reputation for doing it right—with performance, precision, and accountability. Summary/Objective: The Painter performs a combination of tasks, including but not limited to prepping, using a hand palm sander, grinding, cleaning surfaces for paint, taping, spraying primer, painting with a pressure pot painting system, inspecting finished product, and moving objects in/out of paint booth. Responsibilities: • Paint efficiently using a pressure pot painting system., • Skillfully apply body filler, fiberglass, and other materials for body repair, • Sanding paint, filler, and rust areas to prepare the surface for primer., • Masking or taping around glass, decals, and other areas on equipment that are not supposed to be painted., • Cleaning the painting surface prior to painting and cleaning up overspray and other defects after painting, • Preparing items to be painted, by sanding, grinding, and disassembling items by hand., • Work efficiently and safely while prepping and painting items outside and in the elements while properly maintain painting equipment., • Ability (or willing to learn) to fill in as a sandblaster as needed., • Assist other team members with their tasks as able., • Maintain a clean and safe workspace. Qualifications: • Must have experience painting cranes, equipment, or automobiles., • Possess current valid driver's license and a clean driving record., • Experience with pressure pot painting systems preferred., • Experience with filler, fiberglass, and other materials used to repair equipment prior to painting preferred., • Experience with usage of pneumatic and power tools to sand and prepare surfaces for paint/primer., • Experience with masking, covering, or taping equipment., • Possess a strong work ethic and a great attitude., • Willing and able to work long hours as required., • Ability to work outside in all weather conditions including seasonally hot or cold temperatures if required. Benefits: • Competitive pay and matching 401(k) plan, • Vacation, Company Holidays, and Sick Days, • Flexible spending accounts/Health savings account Bigge provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, genetics, military or veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a skilled Painter to join our team. The Grinder/Polisher will be responsible for preparing metal surfaces by grinding, sanding, and polishing to ensure high-quality finishes on our custom control panels and other metal components. This role is critical in maintaining the quality and precision that Panelmatic is known for. Job Duties: • Immerse parts in solution or wash surfaces to remove grease, rust, scale, and dirt, • Set up and operate painting equipment to coat metal products with lacquer, paint, varnish, enamel, oil, or rustproofing material, • Prepare metal surfaces for painting, and paint equipment using brushes, spray guns, sanders, and rollers, • Mix chemicals and paints, fill tanks, control viscosity, thinner, and chemicals to mixture, • Determine flow and viscosity of paints and quality of coating visually or by use of viscometer, • Operate spray guns, position nozzles to direct spray onto the work piece, and regulate air pressure in spray guns that atomize spray, • Verify correct paint colors by reading building prints and designs, • Strip, sand, mask, and repaint surfaces, blend and polish finish to match surrounding areas, manually or using portable power tools, • Spray foam insulation and undercoating as required in buildings, • May install windows, door panes, handles, drains, or other accessories, • May use a full-face ventilation mask for extended periods of time, • Spray specified amount or thickness of primer, protective, decorative, or finish coatings, such as paint, lacquer, sealer, or enamel, onto prepared surfaces, using spray equipment, • May operate lifting and moving devices to move materials and equipment and access areas to be painted, • Must be able to work in enclosed spaces and extreme heat for extended periods of time Requirements • HS Diploma or equivalent required, • One year or more experience applying industrial coatings and or paint required, • Ability to do basic math and calculations required, • Ability to work autonomously without direct supervision required, • Analytical abilities and problem-solving skills required, • Excellent communication skills both written and verbal required, • US work authorization without sponsorship required, • Ability to pass physical, drug, driving, and background check required, • Ability to physically push, pull, and lift 75 lbs or more required, • Ability to sit, stand, and walk for four plus hours at a time required, • Ability to stoop and bend for four plus hours at a time required, • Ability to work at heights above six feet required, • Ability to work in enclosed spaces required, • Alignment with company core values required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401K, profit sharing, and ESOP contributions, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job DescriptionDescription: The Powder Coat Painter is primarily responsible for spray painting. This includes verifying work orders for coating requirements. Essential Job Responsibilities not limited to: • Preparing: Pretreating, cleaning, masking, and priming parts, • Applying: Spraying powder coat onto surfaces, • Inspecting: Performing quality checks, including first piece, in-process, and final inspections, • Maintaining: Adjusting sprayer valves and nozzles, and maintaining and organizing the powder storage room, • Other: Loading and unloading parts, changing hanging patterns onto the carts. Then moving carts in and out of the ovenRequirements: Knowledge/Skills/Abilities: • Ability to read and interpret shop drawings, • Basic math knowledge which includes the use of measuring tools, • Familiar with mixing process of paint colors, • Operate a forklift Competencies • Ability to work in an environment that produces excellent quality and quantity work, • Ability to organize and prioritize jobs, • Ability to communicate – verbally and written Physical Requirements/Work Environment • Able to stand for long periods of time, • Able to lift, push, and pull 25 pounds unassisted, • Typical machine shop environment., • Willing and able to work additional hours as needed to ensure responsibilities are met., • Willing to be cross trained on different machines Minimum Qualifications • High School diploma or GED, • Shop experience spray painting, • Experience in disassembling spray gun and cleaning out lines, operating forklift and overhead crane ------------------------------------------------------------------------------------------------------------------------ At VMC Group and companies we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals, • Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company — APPLY TODAY! ----------------------------------------------------------------------------------------------------------------------- We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job Description Job Title: Shop Helper Motor and Generator Service & Repair Job Description Join a busy motor and generator service and repair shop as a Shop Helper, supporting skilled trades in the teardown, repair, and overhaul of industrial motors and generators. You will handle incoming equipment from the field, assist with disassembly, cleaning, and inspection, and learn the complete overhaul process while working closely with mechanics, welders, machinists, painters, winder operators, and quality control. This role offers hands-on mechanical work in a fast-paced environment and a clear path to grow into a skilled trade. Responsibilities • Assist skilled trades in breaking down, repairing, and overhauling motors and generators., • Receive motors and generators from the field and prepare them for service by disassembling, cleaning, and inspecting components., • Use hand tools and power tools to support disassembly, cleaning, and basic assembly tasks., • Clean and prepare parts in the wash bay, including washing and sandblasting components from the field., • Operate equipment such as sandblasters, heat treat ovens, and varnish tanks to process parts as directed., • Load and unload parts into heat treat ovens and varnish tanks, following safety procedures and work instructions., • Move motors, generators, and components safely throughout the shop using forklifts and overhead cranes., • Pull and stage parts, tools, and materials for high-level technicians to support efficient workflow., • Learn the full overhaul process for motors and generators by observing and assisting mechanics, welders, machinists, painters, winder operators, and quality control staff., • Perform basic material handling, including organizing, stacking, and storing parts and equipment in designated areas., • Support cleaning and housekeeping activities to keep work areas, wash bays, and sandblasting areas organized and safe., • Assist with basic troubleshooting and inspection activities under the guidance of experienced technicians., • Read and follow basic instructions, work orders, and, where applicable, simple blueprints or diagrams., • Communicate clearly with team members and supervisors regarding job status, issues, and safety concerns., • Follow all safety policies, including the use of required PPE, and participate actively in maintaining a safe work environment., • Demonstrate initiative by asking questions, seeking additional responsibilities, and showing interest in learning a skilled trade., • Adapt to physically and mentally demanding tasks, especially in high-heat areas such as the wash bay, sandblasting area, and heat treat oven., • Support weekend and overtime work as needed to meet production and service demands. Essential Skills • At least 3+ years of experience working in a manufacturing environment or service repair shop., • Strong mechanical aptitude and comfort working with mechanical components, motors, or similar equipment., • Proven material handling experience in an industrial or shop setting., • Ability to safely use hand tools and power tools for disassembly, cleaning, and basic assembly., • Experience operating or willingness to learn forklifts and overhead cranes for moving heavy parts and equipment., • Ability to read and use a tape measure accurately for basic measurements., • Effective verbal communication skills to work closely with mechanics, welders, machinists, painters, winder operators, and quality control staff., • Capability to perform physically demanding work, including lifting, standing, and working in hot and dirty environments., • Willingness to work overtime, including regular 50+ hour weeks and some Saturdays., • Strong work ethic, reliability, and commitment to safety procedures and PPE requirements. Additional Skills & Qualifications • Experience in a competing shop that services pumps, motors, or rotating equipment., • Experienced as a junior-level mechanic, automotive technician, or similar mechanical role., • Familiarity with blueprint reading to support repair and assembly work., • Hands-on experience with sandblasting, painting, or winding operations is a plus., • Exposure to pump, motor, or rotating equipment troubleshooting and inspection., • Ability to take initiative, work with minimal supervision at times, and proactively support the team., • Bilingual skills in English and Spanish are highly beneficial for communication in the shop., • Strong willingness to learn and grow into a skilled trade such as mechanic, welder, winder, or painter. Why Work Here? Join a well-established and highly regarded motor and generator service shop that is experiencing strong growth and expanding its facilities. You will be part of a team where hands-on learning and career progression are built into the culture, with clear opportunities to move into skilled trades such as mechanics, welding, winding, or painting. The organization invests in its people, offering a path from entry-level roles into advanced positions, along with the potential to transition into a direct, long-term role that includes paid time off, benefits, and long-range stability. With the industry growing due to increasing power generation demand from data centers, you will work in a busy environment with consistent hours, overtime opportunities, and the chance to build a lasting career in a specialized field. Work Environment Work in a medium to large-sized motor and generator service and repair shop spread across two buildings that share a parking lot, with approximately 38 employees including mechanics, welders, machinists, painters, winder operators, quality control, and helpers. The facility is nonclimate controlled and reflects the nature of heavy industrial work: organized but not spotless, with older equipment and areas dedicated to washing, sandblasting, and heat treating. Helpers typically start in some of the most physically and mentally demanding areas, including the wash bay, sandblasting area, and heat treat oven, where conditions can be extremely hot, especially in the summer. You will regularly work with industrial equipment such as forklifts, overhead cranes, sandblasters, heat treat ovens, and varnish tanks, as well as standard hand and power tools. The role follows a day shift schedule, typically 7:00 a.m. to 4:00 p.m., Monday through Friday, with common overtime that can bring the workweek to 50+ hours and frequent half-day shifts on Saturdays. The dress code includes steel-toe footwear, jeans, a work shirt, and safety glasses, with occasional use of a full protective suit when sandblasting or painting to meet safety and environmental standards. Job Type & Location This is a Contract to Hire position based out of Houston, TX. Pay and Benefits The pay range for this position is $17.00 - $19.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of Houston, TX. Application Deadline This position is anticipated to close on Nov 24, 2026. Workplace Type This is a fully onsite position in Houston,TX. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionJob Title: Production Painter Location: Stafford, TX (100% Onsite) Duration: 12 Months Contract Pay rate: $23.00 per hour on W2 Shift: 1st shift for training 6 AM - 2:30 PM - once trained 2nd shift – 2 PM - 10:30 PM Job Description: • In this role, you will be responsible for preparing, coating, and finishing a variety of industrial valves and components according to strict engineering blueprints and customer specifications., • Because our products operate in high -pressure, corrosive, and extreme environments, your precision in applying protective coatings is critical to ensuring the longevity, safety, and quality of our valves. Responsibilities: • Surface Preparation: Clean, sand, mask , and blast valve surfaces ( castings, forgings , and components ) to remove rust, scale , and grease prior to painting ., • Coating Application: Mix and apply industrial primers, epoxies, polyurethanes, and other specialized protective coating using air, conventional, or plural component spray systems., • Blueprint & Spec Interpretation: Read and interpret manufacturing drawings, paint specifications, and Mil-specs to determine required coating thickness ( DFT/WFT) , color and curing processes., • Quality Control: Perform routine quality checks, including wet/dry film thickness testing ( using gauges ) and holiday ( adherence/defect ) detection to ensure compliance with industry standards., • Equipment Maintenance: Clean and maintain spray guns, pumps, booths, and mixing equipment to ensure optimal performance and a safe working environment., • Safety & Compliance: Strictly adhere to all safety protocols, including the correct use of Personal Protective Equipment (PPE) like respirators, and ensure proper handling / disposal of hazardous materials ( solvents, thinners, paints). Must have: • High School or equivalent education required, • Experience: 1-3 years of experience as an industrial painter, preferably within a valve manufacturing, heavy machinery, or aerospace environment., • Technical Knowledge: Strong understanding of industrial coating materials ( two- part epoxies, zinc primers, urethanes) and their respective mixing ratios/pot life., • Equipment Proficiency: Proven experience operating airless and conventional spray systems as well as surface prep tools ( sandblasters, grinders)., • Detail- Oriented: Ability to achieve uniform coating thickness and recognize defects like runs, sags, or orange peeling., • Physical Stamina: Ability to stand for long periods, lift up to 25 LBS, and work while wearing a respirator in a paint booth environment., • Certifications ( Preferred ): NACE/AMPP certification or formal vocational training in industrial coating is a significant plus.

Job DescriptionDescription: Position Summary: Richmark Properties is seeking a dependable and skilled Maintenance Technician to join our team at a multifamily apartment community. The ideal candidate will assist with daily maintenance operations, unit turns, pool upkeep, and general property care. Key Responsibilities: • Complete maintenance work orders in a timely and professional manner, • Assist with make-ready preparation of vacant units, • Maintain pool cleanliness and equipment functionality, • Ensure grounds and common areas are kept clean and presentable, • Comply with federal Fair Housing laws, and all local laws and ordinances, • On-call rotation and weekend availability Benefits: • 401(k) Retirement Plan, • Health Insurance, • Dental & Vision Insurance, • Life Insurance, • Paid Time Off (PTO), • Bonus Pay Opportunities- Renewal bonus, • Equal Opportunity Employer (EOE) Richmark is an Equal Opportunity Employer and participates in E-Verify. Requirements: Minimum 1 year of on-site experience as an Assistant Maintenance Technician, Make Ready, or Painter Must provide own tools for general maintenance and repair work HVAC / EPA certification preferred Strong working knowledge of HVAC, electrical, and plumbing systems preferred Must have a valid driver’s license or reliable transportation

Join us as a Industrial Painter in Houston and be the start of something real. Looking for Industrial Painter jobs in Houston where hard work drives every shift? This opportunity lets you help manufacture quality products, support production goals, and contribute to a team that keeps operations runn

Painter Level 1/2/3 - Day Shift.

The Painter is responsible for painting, plastering, and wallpapering public and guest areas to ensure a safe, efficient, well-maintained hotel environment.

We are currently hiring a Painter at our Southeast Houston manufacturing facility. As a Painter/Sandblaster, you will be required to perform the following tasks:.

Join our dynamic paint department as a Painter, where you will utilize your expertise in painting techniques and equipment.

The Powder Coat Painter is primarily responsible for spray painting. This includes verifying work orders for coating requirements. Essential Job Responsibilities not limited to: • Preparing: Pretreating, cleaning, masking, and priming parts, • Applying: Spraying powder coat onto surfaces, • Inspecting: Performing quality checks, including first piece, in-process, and final inspections, • Maintaining: Adjusting sprayer valves and nozzles, and maintaining and organizing the powder storage room, • Other: Loading and unloading parts, changing hanging patterns onto the carts. Then moving carts in and out of the oven Knowledge/Skills/Abilities: • Ability to read and interpret shop drawings, • Basic math knowledge which includes the use of measuring tools, • Familiar with mixing process of paint colors, • Operate a forklift Competencies: • Ability to work in an environment that produces excellent quality and quantity work, • Ability to organize and prioritize jobs, • Ability to communicate verbally and written Physical Requirements/Work Environment: • Able to stand for long periods of time, • Able to lift, push, and pull 25 pounds unassisted, • Typical machine shop environment., • Willing and able to work additional hours as needed to ensure responsibilities are met., • Willing to be cross trained on different machines Minimum Qualifications: • High School diploma or GED, • Shop experience spray painting, • Experience in disassembling spray gun and cleaning out lines, operating forklift and overhead crane At VMC Group and companies we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals, • Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company.

Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Panelmatic is seeking an experienced Painter Lead to support daily operations within our Paint Department. The Paint Lead will provide hands-on leadership, technical guidance, and support to paint team members while ensuring work is completed safely, efficiently, and according to quality standards. This role will assist with coordinating daily workflow, training team members, troubleshooting paint application issues, and ensuring finished products meet customer specifications. The ideal candidate will have strong industrial painting experience, attention to detail, and the ability to lead by example in a fast-paced manufacturing environment. Job Duties: • Provide daily direction and support to painters to ensure production goals and quality standards are achieved, • Assist with organizing workflow, prioritizing jobs, and communicating production needs to the Paint Supervisor/Manager, • Train and mentor new and existing employees on proper painting techniques, safety procedures, and department processes, • Perform surface preparation including cleaning, sanding, grinding, masking, stripping, and repairing surfaces prior to painting, • Set up and operate spray equipment to apply primer, paint, lacquer, sealer, enamel, and protective coatings, • Mix paints and coatings according to specifications while maintaining proper viscosity, color, and consistency, • Review work instructions, drawings, and specifications to verify correct colors, finishes, and coating requirements, • Inspect completed work for quality, consistency, and adherence to customer requirements, • Identify paint defects and assist with corrective actions, including sanding, blending, and refinishing, • Ensure proper handling, storage, and use of paints, chemicals, and painting supplies, • Assist with maintaining paint equipment, spray guns, tools, and work areas, • Promote safe work practices, including proper PPE use, ventilation requirements, and hazardous material handling, • Support continuous improvement efforts to increase efficiency, quality, and department performance, • Communicate production issues, material shortages, and quality concerns to leadership, • Operate lifting and moving equipment as needed to safely position materials and access work areas, • Perform hands-on painting duties while supporting team productivity, • Work in enclosed spaces and areas with extreme heat, dust, and paint fumes as required

NOV - 11919 Fm 529 Rd - Responsibilities: Perform surface preparation including masking and sanding; Paint blast and coat products; Clean and maintain paint shop equipment; Change paint booth media filters and surface protectants; Maintain and dispose of hazardous waste properly.

SUMMARY OF COMPANYSouthwest Shipyard, LP provides gas freeing and cleaning services, steaming, and flaring services, Barge and Boat repair, Surface preparation and painting, water treatment and new construction services to the commercial and government marine industry. Southwest Shipyard owns and operates four (4) shipyards in South Texas with direct deep-water access to the Gulf of Mexico. We take pride in our dedicated and experienced workforce that focuses on Quality, Safety and Environmental Excellence. Our motto is Faster, Safer, Better . JOB SUMMARY Experience with blasting in an industrial environment is a must, and prior shipyard experience is advantageous. Availability for overtime, typically around 20 hours. WORK SCHEDULE Regular attendance and punctuality are required of all employees. Day Shift: Monday - Friday - 7:00am to 3:30pm Night Shift: Monday - Friday - 3:30pm to 12:00am Overtime and/or Weekend Availability required. Channelview Location. (18310 Market St, Channelview TX, 77530) BENEFITS Competitive Salary. Comprehensive Benefits (medical, dental, vision, life). 401(k)/Retirement Savings. Friendly Work Environment. Paid-Time off/Holidays. Career Path Opportunities RESPONSIBILITIES Paint barge & boat repair areas, internal compartments & cargo tanks, external surface areas, and specialty components & areas with the required number or coats and coverage.Coat barge internal cargo tanks & voids with the required number of coats and coverage.Operate equipment, vacuum pumps, air pumps, compressors, blowers, meters, hoses etc. to accomplish sandblast & paint duties.Use specialized sandblasting equipment to abrade barge & boat repair areas, internal compartments & cargo tanks, external surface areas, and clean/remove blasting material residue, adhering scale, grease, tar, rust, and dirt from those surfaces in preparation of painting. Prepare metal surfaces for painting by removing old finishes, grease, rust, scale, and dirt by stripping, sanding, wire brushing, or using water or abrasive blasting.Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly.Select the type of abrasive material, such as sand, steel shot, or grit, based on the surface being cleaned and the desired finish.Set up the sandblasting equipment, including the air compressor, hoses, and nozzles, according to the manufacturer s instructions.Mix colors of paint or thinning and drying additives to obtain desired colors and consistencies or according to formula and specifications.Cover surfaces with drop cloths or masking tape and paper to protect surfaces during painting.Smooth surfaces, using sandpaper, scrapers, brushes, steel wool, or sanding machines.Apply primers or sealers to prepare new surfaces on metal, for finish coats per specifications.Apply paint, stain, enamel, or other finishes to equipment, interior or exterior of ships, or other structures, using brushes, spray guns, or rollers.Adjust the flow of abrasive material and air pressure to control the depth of the blast and the speed of cleaning.Cut stencils and brush or spray lettering on surfaces.Inspect the surface after sandblasting to ensure that it meets the specifications.Clean the sandblasting equipment after use to prevent corrosion, perform routine maintenance as required.Maintain records of the types and quantities of materials used.Follow safety procedures to protect oneself and others from injuries.Maintain close communication with Supervisor on status of daily activities and issues which may arise.Assist with planning and preparing daily schedule to facilitate efficient completion of duties.Adhere to and ensure that all work activities are performed in accordance with established safety and environmental standards, regulations, and policies.Perform other related duties as assigned. EXPERIENCE & QUALIFICATIONS Must be proficient in English and be able to communicate effectively with others; Bilingual English/Spanish preferred.Ability to wear a protective suit and a respirator.Ability to use, operate, and maintain specialized equipment including spray guns and paint booths.Ability to multitask, learn quickly, and meet deadlines as needed. Strong attention to detail, with a strong focus on quality and customer satisfaction. Be detail-oriented, have steady hands, and the ability to follow instructions. Ability to understand Company Quality Manual and procedures described and required.Ability to manage time and tasks effectively and efficiently.High School Diploma or GED equivalent preferred.1-3 years experience Painting and Sandblasting in an Industrial Manufacturing environment.1 year experience operating a sandblast unit.Bilingual Spanish, preferred PHYSICAL / MENTAL REQUIREMENTS The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses, life vest, respirators, ear plugs, steel toed shoes, personal flotation devices (PFD s), or other protective equipment as required by the work performed and location the work is being done. In addition, Employees in this position must also be capable of: Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which may be of varying heights and access parameters. Standing, stooping, bending, crouching, kneeling, squatting, climbing, crawling, or sitting for long periods of time. Repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work. Climbing stairs, and/or vertical ladders of varying heights. Working in confined work areas and/or elevated heights. Lifting objects of minimum of 10lbs, with maximum single-person lift limit of 50lbs, with frequent lifting and carrying. Adapting to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration. Visually inspecting equipment and verifying information, often in small print. Applying sideways/upward/downward pressure to tighten and loosen hardware. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Employment at Southwest Shipyard, LP is on an at-will basis. There is no contract of employment between Southwest Shipyard, L.P., and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Only the Owner or President has the authority to modify the at-will relationship, and then only in writing specifically addressed to the employee on this issue and signed by Southwest Shipyard, L.P. Executive. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. EEO Statement Southwest Shipyard, LP is an equal opportunity employer, and all qualified candidates will receive consideration without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or any other characteristic protected by law. Southwest Shipyard, LP participates in the E-Verify Employment Verification Program. Southwest Shipyard, LP is not currently accepting unsolicited resumes from search firms. Regardless of past practice, all resumes submitted by search firms to any employee at Southwest Shipyard, LP, via-email, the Internet or directly to hiring managers at Southwest Shipyard, LP in any form without a valid written agreement in place for that specific position will be deemed the sole property of Southwest Shipyard, LP. As a result, no fee will be paid in the event the candidate is hired by Southwest Shipyard, LP. PIe0162d128d33-7157

Marmon - - Responsibilities: Clean grease, dirt, rust, and old paint from equipment; Mix and apply uniform paint coatings to specs; Prepare equipment for painting/blasting restoration; Mask, tape, and cover areas prior to painting; Inspect finished product for quality and safety procedures.

Aerotek - - Responsibilities: Assist painters and powder coaters in paint area; Prepare parts for painting by sanding, blasting, and cleaning surfaces; Mix/apply paint and coatings per specs; Move materials and finished parts through shop; Support with sandblasting and other blasting operations.

Tradesmen International - - Responsibilities: Assist with preparation and painting of de-energized substations; Apply coatings to surfaces; Fill and attend to paint pot; Move hoses and materials; Carry five-gallon paint pails and equipment; Keep work area clean and organized.

Nailor Industries is seeking a Powder Coater to join our manufacturing facility in northeast Houston, TX. We are currently looking for candidates who are available to work first or second shifts. Our Powder Coat Painters are responsible for applying powder coating to surfaces of metal parts or products to protect them and provide a decorative finish. The job typically involves preparing the surfaces, applying the powder coating, and ensuring the finished product meets quality standards. Surface Preparation: Clean, sandblast, or chemically treat metal surfaces to prepare them for coating. Remove grease, dirt, and other contaminants. Application of Powder Coating: Use electrostatic spray guns to apply powder coating evenly to metal surfaces. Ensure proper coverage and thickness. Operation of Equipment: Operate and maintain powder coating equipment, such as spray guns, ovens, and booths. Adjust settings to ensure optimal application. Quality Control: Inspect coated items for defects such as uneven coverage, runs, or contamination. Re-coat or touch up as necessary to meet quality standards. Safety and Compliance: Follow all safety protocols and regulations, including the use of personal protective equipment (PPE) and proper handling of chemicals and equipment. Record Keeping: Maintain accurate records of work performed, including batch numbers, coating specifications, and inspection results. Maintenance: Perform routine maintenance on coating equipment and booths. Troubleshoot and repair equipment as needed to minimize downtime. Collaboration: Work closely with other team members, including production supervisors and quality inspectors, to ensure smooth workflow and high-quality output. Inventory Management: Monitor and manage inventory levels of powder coating materials and supplies. Order new materials as needed. Qualifications/Experience: Experience: Prior experience in powder coating or industrial painting is preferred. Familiarity with powder coating techniques and equipment is highly desirable. Technical Skills: Ability to operate and maintain powder coating equipment. Understanding of different types of powder coatings and their applications. Attention to Detail: Strong attention to detail to ensure high-quality finishes and adherence to specifications. Physical Stamina: Ability to stand for long periods, lift heavy objects, and perform repetitive tasks in a production environment. Safety Awareness: Knowledge of safety procedures and regulations related to powder coating and industrial painting. Communication Skills: Good communication skills to effectively collaborate with team members and supervisors. Education: High school diploma or equivalent. Vocational training or certification in industrial painting or powder coating is a plus. Working Conditions: The job is typically performed in a manufacturing or industrial setting. It may involve exposure to fumes, chemicals, and high temperatures. Use of personal protective equipment (PPE) such as masks, gloves, and safety goggles is required. Career Advancement: Opportunities for advancement may include positions such as Lead Painter, Coating Supervisor, or Quality Control Inspector. Additional training and experience can lead to roles in production management or specialized coating applications.

Will complete scheduled projects in addition to urgent requests, while working in an efficient, courteous and professional manner and complying with all Four Seasons' policies. What we offer:Competitive Salary, wages, and a comprehensive benefits packageExcellent Training and Development opportuniti

Painter - South Houston South Houston, TX, USA Full Time Purpose of the Position: Produce a quality finished product each and every time by using personal skills, equipment, and established manufacturing processes associated with finished Paint coatings including wet and/or powder coat paint applica

Total Safety is the world's premier provider of integrated safety and compliance services and the products necessary to support them, including gas detection, respiratory protection, safety training, fire protection, compliance and inspection, industrial hygiene, onsite emergency medical treatment/p