Power distribution jobs in Buffalo, New YorkCreate job alerts

Job DescriptionJoin a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. Job Summary: The Controls Technician Supervisor leads the controls and automation team to ensure the reliability, safety, and efficiency of production systems. This role combines hands-on technical expertise with leadership responsibilities, overseeing installation, maintenance, troubleshooting, and optimization of electrical and automation systems. The Supervisor also drives continuous improvement initiatives, mentors technicians, and collaborates cross-functionally to support production goals. Must have holiday and weekend availability. Must also be available to work all shifts (1st, 2nd, 3rd). Key Responsibilities: • Supervise and coordinate daily activities of Controls Technicians, ensuring timely and effective execution of maintenance and troubleshooting tasks., • Lead efforts in diagnosing and resolving complex electrical and automation issues across production systems., • Oversee development, modification, and troubleshooting of PLC programs (Allen-Bradley, Siemens) and HMI interfaces., • Ensure calibration and maintenance of instrumentation devices including sensors, transmitters, and control loops., • Review and approve electrical installations and repairs, ensuring compliance with safety and regulatory standards., • Collaborate with engineering, production, and maintenance teams to identify and implement process improvements and automation upgrades., • Maintain accurate documentation of control systems, electrical drawings, and maintenance records., • Provide technical training and mentorship to Controls Technicians and production staff on control systems and safety protocols., • Lead root cause analysis and corrective actions for recurring equipment failures, implementing preventative measures., • Evaluate aging or obsolete equipment and recommend upgrades or replacements to maintain operational integrity., • Support strategic planning for controls infrastructure, including budgeting and resource allocation., • Ensure compliance with HACCP, GMP, and other food safety regulations., • Associate’s degree with 5+ years of experience in controls or automation, including supervisory or team lead experience., • Technical degree or certification in electrical or controls-related field preferred., • Proven proficiency in PLC programming (Allen-Bradley, Siemens), HMI development, and industrial control networks., • Strong knowledge of electrical systems, instrumentation, and automation in a manufacturing environment., • Experience with food processing equipment and familiarity with sanitation and safety standards is a plus., • Excellent leadership, communication, and problem-solving skills., • Commitment to safety and continuous improvement., • Advanced troubleshooting of PLC-based control systems (Rockwell Software preferred)., • Skilled in digital/analog instrumentation and process loop calibration., • Proficient in configuring industrial networks (Ethernet, DeviceNet, DH+)., • Experienced with 480V 3-phase power distribution and motor control systems., • Familiar with RSLogix 5/500/5000, FactoryTalk, BOOTP, and WonderWare., • Capable of reading and interpreting electrical schematics and control diagrams., • Proficient in using electrical test equipment and diagnostic tools., • Prior manufacturing experience with PLCs and automation controls., • Dairy and/or food processing expertise, particularly in Mixing & Blending, Retort operations, automatic packaging, system and equipment mechanics, and sanitation and safety. Management Responsibility: This is a supervisory role reporting to the Maintenance Manager. Responsible for leading a team of Controls Technicians and coordinating with other departments to ensure smooth operations. Work Environment: While performing the duties of this job, the employee frequently works near moving mechanical parts, high-speed and processing equipment; is occasionally exposed to wet and/or humid conditions and toxic or caustic chemicals; is frequently exposed to moderate to high noise levels in the work environment. Must be able to see, grasp hold, walk, climb, bend, and stretch, lift up to 40 lbs. Will spend significant time in the production environment where temperatures fluctuate, floors may be wet, and noise is a constant factor. Pay: $90K-$115K a year* *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job DescriptionDescription: #ComeJoinTheFun as a Maintenance Technician and contribute to #MakingCandyFun We are seeking Maintenance Technicians on 2nd Shift up to $38/hr to start! The ideal technician will perform routine and preventive maintenance to install, maintain, and disassemble machines, machinery parts, and mechanical equipment. Compound Development Solutions, Inc/RM Palmer Company, LLC designs, produces, packages, and ships seasonal chocolate novelties. Our products include filled chocolates, solid chocolates, chocolate bars and balls, chocolate cups and coins, chocolate patties, and seasonal products. In addition to their own branded products, the Company co-manufactures both seasonal and everyday products for other large branded companies. Today, the Company operates out of two manufacturing facilities and one distribution facility with ~600 full-time employees. R.M. Palmer Company, LLC has some of the most differentiated manufacturing capabilities in the industry as one of the only companies in the U.S. able to make hollow molded chocolate candy products and multicolor chocolate candy novelties. Maintenance Technician Details: • 2nd Shift Schedule: Monday-Friday 3pm-11pm, • Competitive rates and comprehensive benefits package, • Utilize knowledge of mechanical, electrical, and electronics systems to repair and maintain sitewide electrical, mechanical, and electromechanical equipment and processes, including troubleshooting problems when operators report issues with their equipment., • Respond to production needs and troubleshoots machines and machine/line control systems, performs repairs and preventative maintenance on production and non-production equipment. Provides both production and maintenance supervision with timely follow-up communication on repairs., • Responsible for completing all daily, preventative, and predictive maintenance activities as assigned with regards to food safety and the reduction of equipment failures., • Work with other members of Maintenance to contribute improvements to/update all PM procedures., • Work with other members of Maintenance to prioritize maintenance jobs, help collect and analyze downtime information, gives input on all maintenance opportunities to improve plant operations., • Operate standard maintenance tools such as power tools, basic hand tools, electric tools, precision maintenance tools, preventative maintenance tools, etc., • Utilize and work with maintenance trades and components such as electrical, welding, pipefitting, fabrication, gearbox and bearing maintenance, lubrication, pumps and piping systems, mechanical maintenance, hydraulic, pneumatic, and combustion systems., • Troubleshoot, modify, and install equipment by reading and comprehending electrical/mechanical schematics, blueprints, and/or operation manuals., • Document completed work and the conditions found utilizing maintenance computer software as necessary., • Interact regularly with peers and management to pursue continuous improvement of facility operations and promote a teamwork focused environment., • Operate forklifts, loaders, scissor lifts, aerial lifts and other mobile equipment., • Understand and adhere to all safety policies and procedures., • Maintain a safe and clean work environment., • Other duties as assigned.Requirements:, • Prior education or experience with electrical and mechanical equipment maintenance and repair., • 2 year technical degree or Associate degree in Industrial Maintenance and/or equivalent combination of education and experience., • 2 – 3 years as a maintenance technician or similar role, preferably in a manufacturing, industrial, or commercial setting., • Strong knowledge of mechanical, electrical, plumbing, and HVAC systems., • Ability to diagnose and troubleshoot problems efficiently and perform effective repairs., • Proficient in reading technical manuals, blueprints, and schematics., • Excellent communication skills and the ability to work collaboratively with team members and other departments., • Strong attention to detail and organizational skills., • Previous experience CMMS system is a plus., • Food manufacturing experience is preferred.

Job Description Are you passionate about healthcare building engineering systems? We are seeking a Senior Electrical Engineer with a strong background in healthcare building projects to join our Buffalo, NY Office. In this role, you will collaborate with regional leaders and engineering teams to develop concepts, strategies, designs, drawings, specifications, and reports from project inception through construction. You must be able to work independently and as part of multi-discipline teams to drive successful client outcomes in the built environment. This is a unique opportunity to lead and build a team, playing a key role in shaping the future of our healthcare engineering sector. At LaBella, our architects and engineers are problem-solvers, innovators, and change-makers, committed to addressing local and regional challenges, preserving natural resources, and planning for a sustainable future. Duties may include: Project Development & Client Engagement • Scope projects and develop proposals., • Build and maintain relationships with existing and prospective clients., • Function as the lead electrical engineer on multi-discipline projects from proposal through construction., • Serve as a project manager for building engineering-led projects. Electrical Engineering & Design • Develop electrical designs including single-line diagrams, electrical room layouts, panel sizing, lighting, and building systems., • Perform load calculations for generators, transformers, switchgear, MCCs, panel boards, VFDs, feeders, and branch circuits., • Prepare electrical design drawings, specifications, and reports., • Research and present coordinated design solutions., • Conduct building condition assessments and generate reports., • Ensure compliance with national, state, and local regulations, including FGI guidelines, DOH requirements, and CON submissions. Team Collaboration & Leadership • Work closely with mechanical, civil, structural engineers, and architects., • Mentor and train junior engineers., • Delegate and oversee project tasks to ensure successful completion., • Engage with owners, contractors, permitting authorities, and industry organizations. Technical Expertise & Innovation • Serve as Engineer-of-Record and internal technical expert on assigned projects., • Maintain up-to-date knowledge of industry technologies, trends, and best practices., • Passion for healthcare building systems and recognized expertise in the field., • Bachelor’s or Associate’s degree in Electrical Engineering, Engineering Technology, or a related field., • PE license (NY or OH) strongly preferred., • Minimum 10 years of experience in an A/E consulting firm., • Expertise in power distribution, lighting, fire alarm, security systems, and telecommunications design., • Experience with AutoCAD and Revit is a plus., • Familiarity with electrical modeling programs (e.g., AGi32 for lighting, SKM for power analysis)., • Understanding of Arc-Flash Evaluation and electrical safety codes., • Strong writing, organizational, and communication skills., • Attention to detail—because in this role, every detail matters!, • Ability to manage multiple projects simultaneously. Salary Range: $125,000 - $175,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Why Join Us? • Opportunity to lead and grow a team in a respected firm., • Collaborative, mission-driven culture focused on innovation and sustainability., • Work on impactful projects that shape healthcare environments. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description About Us SWBR is a nationally recognized design firm with expertise in architecture, interior design, structural engineering, landscape architecture, graphic design, planning and civil engineering. Since our founding in 1969, the focus of our expertise and most of our current work supports education, housing, and workplace design. We are proud of the diverse range of backgrounds, personalities, and passions that make up our team. But for all our differences, we’re united by a core mission: to positively impact lives through meaningful design. With 120+ professionals, we are headquartered in Rochester, New York with offices in Troy, Syracuse, and Buffalo, New York. We are currently seeking a full-time Level IV Interior Designer in our Rochester, NY office or a Senior Interior Designer in our Buffalo, Syracuse or Troy office. This position leads Interior Design services on project teams and reviews/advises/provides design solutions, including interior space/spatial relationship analysis and aesthetic/functional requirements in support of the design intent that protects the health, safety, and welfare of our clients. The incumbent will also work to enhance/define aspects of project through spatial analysis, color, finish, furniture, lighting recommendations, special design features and furniture layouts. They will be responsible for delegation/completion of interior documents and expected to seek new and maintain existing client relationships. An incumbent located outside of Rochester will also be responsible for starting and maintaining a materials library for that location. Applicants for this position must have experience in education, municipal, commercial, industrial and/or multi-unit/multi-use housing based projects or their application may not be considered. Duties: • Manages Interior Design projects (including budget, fee, scope, client goals, milestones and deadlines). Leads Interior Design services on Architectural projects. Client contact from Interiors, • Reviews product and material research to ensure durability, wearability, maintenance, installation requirements, etc., • Prepares budget estimates for interior finishes and furnishings, • Produces/delegates project documents (including CAD production), schedules and specification information for interior building construction, materials and furnishings per SWBR standards. Reviews interior documents for accuracy, thoroughness/completion • Understands and implements contracts and applicable AIA agreements, • Prepares interiors fee estimates, hours, letter proposals, resource plans, including consultants, • Works with Business Development to prepare qualification packages, • Oversees preparation of material boards, power points, 3D renderings, sketches, • Leads in-house interiors project meetings, including consultants, • Leads (or guides designers to lead) client meetings/presentations, will engage in working directly with client, • Reviews/processes or delegates submittals, leads punch lists, • Answers/delegates requests for information (RFI) and architect’s supplemental information (ASI), • Understanding the documentation for extra services – Professional Services Change Order (PSC) vs follow up email/additional services proposal, • Prepares Rough Order of Magnitude (ROM) cost estimates for projects, • Review financial reports from projects they are involved with, responsible for interiors hours, distribution of hours and fee, • Reviews project invoices, follows up with clients for aged receivables, outstanding invoices, • 4 Year College degree in Interior Design or Architecture, • 8-15 years of related experience in a commercial-based Interior Design firm required. Experience with Education, multi-unit/multi-use housing, Commercial, Municipal, and/or Industrial projects needed., • NCIDQ Certification required, should have good-to-exceptional LEED V4 Knowledge Base., • Advanced knowledge of interior finishes & materials (flooring, wall, ceiling, specialty, upholstery, window treatment, etc.), • Advanced knowledge of color theory, pattern/texture with materials and finishes, • Advanced knowledge of interior building codes, • Knowledge of standard vs premium products including content, durability, and maintenance., • Has experience with reviewing documents for required contents, thoroughness and completion during schematic design, design development, construction documents, permit sets, etc, • Knowledge of/ability to enact Professional Service Change Orders and proposals for additional services, • Advanced knowledge of furniture (styles) – available finishes and upholsteries., • Advanced proficiency in Revit, Word, Excel, Power Point, Sketch Up, Photoshop, Illustrator, 3D color renderings, other programs plus ability to help and/or teach other designers as needed, • Individual will work in a normal office setting and occasionally visit active construction sites, and must be physically able to stand, walk, stoop, kneel, crouch, reach, and keyboard., • Position requires occasional lifting, pulling and pushing of up to a maximum of 25 pounds Base Salary Information: $74,247-$89,482 The above salary ranges represent a good faith range for incumbents of this position. Actual offers will be based on experience, education level, and demonstrated skills and will be at the discretion of the employer. We actively support professional development, including steps towards licensure and/or related accreditations, as a benefit of employment. SWBR offers an outstanding compensation and benefits package and provides a creative environment. Applicants interested in joining a progressive, energetic and family-friendly firm that rewards hard-working team players and offers unlimited growth potential in a multi-studio design setting should view our website at to apply. SWBR is an Affirmative Action/Equal Opportunity Employer. Veterans and Individuals with disabilities are encouraged to apply.

Job Description Power-Flo Technologies is seeking an Industrial Outside Sales Account Manager to join our team. You will work within the industrial MRO market, guiding our customers through the selection of products and solutions including power distribution systems, industrial controls, PLCs, pumps, and other mechanical equipment. You will be responsible for all sales of all products and services within the assigned territory (and/or within assigned accounts). Territory: Long Island, NYC, Westchester Base Salary Range: $65,000 - $95,000/year, draw against commission Competitive Benefits Package • Health insurance (medical, dental, vision), • EAP, • PTO program and paid holidays, • 401K with employer match, • Company provided life insurance (after 1 year of employment) Industrial Outside Sales Responsibilities • Schedule outside appointments with existing customers to review applications requirements, and uncover new opportunities, • Generate and develop new business to increase revenue, through prospecting activities, including cold calling, • Effectively liaison between the company and customers for all ongoing account management activities including; quotations, pricing, delivery, technical support, service and new product and promotional releases, • Establish and maintain up to date knowledge on new products, procedures, services and tools by successfully completing all training activities as needed, • Determine customer requirements in order to recommend specific products, solutions, or services, • Target Account Planning and Execution, • Prepare and execute effective sales presentations and demonstrations of products, • Annual sales forecast and execution, • Attend conferences and trade shows, • All other duties as assigned from time to time. What You Bring to the Industrial Outside Sales Role: • Minimum three (3) years of demonstrated sales success and technical knowledge of one or more of the following: industrial controls, PLCs, switchgear, automation, motors and pumps, and mechanical applications, products, and services, • At least 2 years of business to business sales experience, • Desire to grow business through outside sales appointments, • Track record of success and achievement as a sales representative, • Consistently identify new sources of business, • Maintain high productivity and standards, • Strong negotiation and communication skills, • Strong technical aptitude of products, • Motivated to learn, • Commitment to quality, • Valid Driver's License Benefits We are an equal opportunity employer offering competitive compensation and benefits package including health, disability, life insurance; 401(k) and long-term disability plans. Company provides a vehicle or mileage plan, cell phone, and laptop. Our Core Values • Our People, • Relationships, • Innovation, • Sustainability, • Growth, • Determination Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Position Summary: GTI Fabrication is seeking a highly experienced and technically proficient Senior Manufacturing Engineer to lead the design, control, and continuous improvement of manufacturing processes in a modular fabrication environment. This individual contributor role focuses on developing scalable, efficient production methods for custom enclosures, containerized systems, and structural steel weldments. The ideal candidate will have deep experience in SolidWorks, AutoCAD, Lean Manufacturing, and quality systems such as ISO9001. The Senior Manufacturing Engineer will work cross-functionally with Engineering, Operations, Quality, and Supply Chain to ensure manufacturability, cost-effectiveness, and regulatory compliance across the product lifecycle. Key Responsibilities: • Design, implement, and optimize manufacturing processes for modular fabricated systems, containerized enclosures, and steel structures., • Develop formal manufacturing documentation including process flow diagrams, work instructions, BOMs, routings, CNC programming, and assembly/inspection plans., • Use CAD tools (SolidWorks and AutoCAD) to design fixtures, tooling, and work-holding solutions to support scalable production., • Translate engineering design requirements into robust and efficient production processes., • Lead new product introduction (NPI) efforts from prototype through full-rate production., • Apply Lean Manufacturing principles to reduce waste, improve flow, and optimize floor layouts., • Integrate automated and digital manufacturing technologies where applicable., • Collaborate with cross-functional teams to evaluate manufacturability and ensure alignment between engineering intent and production capability., • Utilize ERP systems (NetSuite preferred) to manage process documentation and support real-time operations visibility., • Maintain compliance with ISO 9001 standards; support internal and external audits., • Drive root cause analysis and corrective action using tools like FMEA, SPC, and 8D., • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or related field., • 8–15 years of experience in manufacturing engineering, preferably in modular fabrication, defense, energy, or industrial equipment sectors., • Proficiency in SolidWorks and AutoCAD for 3D modeling, 2D drafting, and tolerance analysis., • Strong working knowledge of Lean Manufacturing, Six Sigma, or similar methodologies., • Experience with ERP/MRP systems (NetSuite a plus)., • Demonstrated success in process development, design for manufacturability, and production scaling., • Hands-on experience with containerization, modular product platforms, and structural weldments., • Knowledge of ISO9001 quality systems and compliance standards., • Exceptional analytical, problem-solving, and project management skills., • Experience in containerized HVAC, power distribution, or control system enclosures., • Familiarity with CNC machining, sheet metal fabrication, and industrial coatings., • Certification in Lean Six Sigma, PMP, or related process improvement disciplines., • This is a full-time onsite position based in Buffalo, NY., • Work takes place in both office and fabrication floor environments., • May require occasional travel to customer sites or GTI facilities., • Must be able to occasionally lift up to 25 lbs and walk fabrication areas. GTI Fabrication is an equal opportunity employer committed to building a diverse and inclusive workplace.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and support services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Sales Engineer II is responsible to engage an assigned list of existing and prospective accounts seeking to learn how Stark Equipment's Critical Power Division can help align Siemens product and service offerings with current and future facility infrastructure needs. This position will focus on providing design assistance, configure product offerings and help set pricing strategies for power distribution equipment on new applications and existing facility critical power equipment. Successful performance will be directly related to achieving revenue & gross profit targets & account management attainment benchmarks. What are we looking for: • At least 5 years of industry (power distribution) experience required., • Technical understanding of Electrical Power systems required., • Capability to mentor and foster a healthy team environment., • Ability to multi-task, work under pressure and meet deadlines required., • Must be able to deal with a large volume of work in a fast-paced, time-sensitive environment., • Ability to drive individual sales success., • In-depth knowledge of the market. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. This is a base salary, and the position also includes eligibility for a variable sales bonus. There is potential for a sales start-up assistance program. Job Posted by ApplicantPro

Job DescriptionDescription: Ferguson Electric’s Electrical Engineer II is a mid-level position for engineers focusing on becoming self-sufficient on design and engineering tasks. This position will contribute to the electrical system design, engineering, commissioning and construction efforts for commercial and industrial projects, including healthcare, education, research, commercial facilities, and utilities. This role involves supporting project design teams, developing innovative electrical solutions, and ensuring compliance with applicable codes and standards. The Electrical Engineer II role will provide guidance to junior staff as needed, assist in managing project deliverables, and support the company’s commitment to quality, safety, and client satisfaction while upholding Ferguson Electric’s core values. RESPONSIBILITIES • Electrical Systems Design:, • Design of electrical systems, including power distribution, lighting, fire alarm, and communication systems, for commercial and industrial projects., • Support the development of project design goals, specifications, and strategies to meet client requirements and project objectives., • Participate in quality control reviews of engineering documents to learn about accuracy and compliance with project requirements., • Help ensure designs comply with applicable codes (e.g., NFPA, IEEE) and industry standards., • Electrical Systems Analysis and Field Support:, • Help specify electrical equipment, components, and materials, ensuring compatibility with project needs and budgets under supervision., • Perform engineering studies, such as load analysis, short-circuit, and coordination and arc flash, using tools like SKM or Easypower with minimal supervision., • Review of submittals, shop drawings, and other construction documents to ensure they are meeting the project requirements., • Develop relay, transformer, breaker and battery testing plans and reports with minimal experience., • Develop relay programs with minimal guidance., • Support service technicians with troubleshooting customer electrical system problems under the guidance of higher-level engineers., • Project Leadership:, • Support the coordination of electrical engineering aspects of projects, helping adhere to budgets, schedules, and quality standards., • Participate in project team and client meetings to align on project scope, progress, and deliverables., • Assist in the preparation of construction documents, including drawings and specifications., • Site Engagement:, • Participate in job site visits to observe existing conditions, monitor construction progress, and learn about compliance with design specifications., • Attend construction meetings and provide basic technical support to field teams and subcontractors as needed., • Perform physical walk-throughs of sites under supervision to assess conditions and resolve issues., • Process Improvement:, • Contribute to strategies to improve design quality, coordination, and efficiency in production efforts., • Support the incorporation of renewable and sustainable design practices where applicable to enhance project outcomes. Requirements: ABOUT YOUR QUALIFICATIONS • Education and Experience:, • Bachelor’s degree in Electrical Engineering or Architectural Engineering from an ABET-accredited program required and preferred with electrical systems focus., • 4-6 years of experience in electrical engineering, with a focus on commercial or industrial projects., • Engineer-in-Training (EIT) certification is required or additional 5 years of experience directly related to the job responsibilities., • Technical Skills:, • Strong proficiency with Microsoft Office Suite (Word, Excel, Outlook) for documentation and reporting., • Proficiency in drawing software (e.g. Revit and AutoCAD) and electrical analysis software (e.g., SKM) is preferred., • Good understanding of designing power distribution, lighting, and communication systems per NEC, IEEE and other relevant codes is preferred., • Ability to read and understand construction drawings and specifications., • Basic understanding and knowledge of electrical system installation methods and standards., • Exposure to renewable energy systems or sustainable design practices is a plus., • Soft Skills:, • Strong problem-solving skills and ability to work on multiple tasks., • Good leadership and mentorship skills to contribute to team efforts., • Good communication and interpersonal skills to collaborate with clients, contractors, and internal teams., • Organizational and time management skills to handle tasks and meet deadlines., • Ability to adapt to an adjusted work schedule, including occasional overtime or evening/weekend hours, to meet project demands., • Willingness to accept constructive feedback and make changes as necessary to improve job performance., • Willingness to learn and develop skills in various engineering tasks, software, and equipment., • Other Requirements:, • Ability to conduct physical site walk-throughs and work in various environmental conditions., • Participate in in-house and manufacturer training to enhance skills.

Job Description At the C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking an Electrical Project Engineer to join our Infrastructure Team as part of our Education, Healthcare and Public Facilities Group. The successful candidate will have experience in the design of medium and low voltage electrical systems for buildings, utilities, industrial, campus and facilities. The position will require working on and leading teams for designs of various projects. Candidate will have the opportunity to lead in the growth of the MEP development of staff and provide business opportunities for future projects. This position can be based in our Syracuse, Rochester, Buffalo or Albany office. Relocation assistance available to qualified candidates. Minimal travel estimated under 15%. Position Responsibilities • Ability to motivate and mentor junior staff., • Project management, communication and multi-tasking skills., • Ability to work with internal and external staff on an individual and team basis., • Ability to challenge one’s self and broaden knowledge base., • Bachelor's of Science or Technology in Electrical Engineering, • 5-10 years of related experience, • PE preferred, FE required, • Experience with the National Electric Code., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash., • Experience with the layout and design of low voltage building distribution systems. *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Position Summary: GTI Fabrication is seeking a highly experienced and technically proficient Senior Manufacturing Engineer to lead the design, control, and continuous improvement of manufacturing processes in a modular fabrication environment. This individual contributor role focuses on developing scalable, efficient production methods for custom enclosures, containerized systems, and structural steel weldments. The ideal candidate will have deep experience in SolidWorks, AutoCAD, Lean Manufacturing, and quality systems such as ISO9001. The Senior Manufacturing Engineer will work cross-functionally with Engineering, Operations, Quality, and Supply Chain to ensure manufacturability, cost-effectiveness, and regulatory compliance across the product lifecycle. Key Responsibilities: • Design, implement, and optimize manufacturing processes for modular fabricated systems, containerized enclosures, and steel structures., • Develop formal manufacturing documentation including process flow diagrams, work instructions, BOMs, routings, CNC programming, and assembly/inspection plans., • Use CAD tools (SolidWorks and AutoCAD) to design fixtures, tooling, and work-holding solutions to support scalable production., • Translate engineering design requirements into robust and efficient production processes., • Lead new product introduction (NPI) efforts from prototype through full-rate production., • Apply Lean Manufacturing principles to reduce waste, improve flow, and optimize floor layouts., • Integrate automated and digital manufacturing technologies where applicable., • Collaborate with cross-functional teams to evaluate manufacturability and ensure alignment between engineering intent and production capability., • Utilize ERP systems (NetSuite preferred) to manage process documentation and support real-time operations visibility., • Maintain compliance with ISO 9001 standards; support internal and external audits., • Drive root cause analysis and corrective action using tools like FMEA, SPC, and 8D., • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or related field., • 8–15 years of experience in manufacturing engineering, preferably in modular fabrication, defense, energy, or industrial equipment sectors., • Proficiency in SolidWorks and AutoCAD for 3D modeling, 2D drafting, and tolerance analysis., • Strong working knowledge of Lean Manufacturing, Six Sigma, or similar methodologies., • Experience with ERP/MRP systems (NetSuite a plus)., • Demonstrated success in process development, design for manufacturability, and production scaling., • Hands-on experience with containerization, modular product platforms, and structural weldments., • Knowledge of ISO9001 quality systems and compliance standards., • Exceptional analytical, problem-solving, and project management skills., • Experience in containerized HVAC, power distribution, or control system enclosures., • Familiarity with CNC machining, sheet metal fabrication, and industrial coatings., • Certification in Lean Six Sigma, PMP, or related process improvement disciplines., • This is a full-time onsite position based in Buffalo, NY., • Work takes place in both office and fabrication floor environments., • May require occasional travel to customer sites or GTI facilities., • Must be able to occasionally lift up to 25 lbs and walk fabrication areas. GTI Fabrication is an equal opportunity employer committed to building a diverse and inclusive workplace.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking a Senior Project Engineer - Electrical who excels by transforming complex electrical requirements into safe, reliable, and integrated building infrastructure solutions. You lead projects from conceptual design through commissioning, using deep technical expertise, system analysis, and real-world constructability insight to ensure every electrical system is code-compliant, cost-effective, and optimized for long-term performance. You thrive at bridging design and field execution-coordinating seamlessly with mechanical, controls, and low-voltage teams to deliver fully integrated building solutions that support smarter, more efficient operations. Through technical leadership, cross-functional collaboration, and mentoring of engineering staff, you elevate project quality, reduce risk, and strengthen Stark Tech's reputation for delivering high-performing electrical infrastructure. What are we looking for • Associate degree required; Bachelor's degree preferred. Advanced degree a plus., • 10+ years of experience in electrical building infrastructure, power distribution, or energy/efficiency-driven electrical design., • Proven experience leading projects and managing engineering or cross-functional teams., • Expert knowledge of NEC, NFPA, IEEE, and local AHJ electrical requirements., • Strong understanding of service entrance design, switchgear, grounding, lighting, motor control, and distribution systems., • Experience performing power system studies (short circuit, arc-flash, coordination, voltage drop, load analysis)., • Skilled in producing Basis of Design documents, one-lines, riser diagrams, specifications, and construction documentation., • Ability to coordinate electrical designs with mechanical, structural, controls, and IT teams for fully integrated solutions., • Experience supporting commissioning, functional testing, performance verification, and owner turnover processes., • Proven ability to mentor junior engineers and influence cross-functional project teams., • Strong customer-facing communication skills. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description Are you an experienced electrical engineer looking for an opportunity to grow your skills and work on a variety of exciting building projects? We are seeking an Electrical Engineer to join our Buffalo, NY office. In this role, you will work closely with senior engineers, project managers, and multi-discipline teams to develop electrical system designs, drawings, specifications, and reports for a diverse range of buildings. You will have the opportunity to gain experience in various markets, including healthcare, commercial, education, and institutional projects. This is a growth-focused position, ideal for an engineer eager to expand their knowledge and contribute to innovative, high-quality designs. At LaBella, we are passionate about problem-solving, sustainability, and creating impactful solutions for the built environment. The ideal candidate is self-motivated, detail-oriented, and eager to develop their expertise. Your responsibilities may include: Electrical Design & Engineering: • Develop electrical designs for power distribution, lighting, fire alarm, security systems, and telecommunications., • Perform load calculations for generators, transformers, switchgear, panel boards, VFDs, feeders, and branch circuits., • Prepare design drawings, technical specifications, and engineering reports., • Research and implement industry standards and best practices., • Assist with building condition assessments and system evaluations. Collaboration & Project Support : • Work closely with mechanical, civil, and structural engineers, as well as architects., • Assist senior engineers in multi-discipline project coordination., • Communicate with clients, manufacturers, and contractors to address project challenges and develop solutions., • Participate in project meetings and contribute technical insights. Technical Growth & Development: • Stay current with industry trends, codes, and emerging technologies., • Receive mentorship from senior engineers and take on increasing project responsibilities., • Bachelor’s or associate’s degree in electrical engineering, Engineering Technology, or a related field., • EIT certification preferred; working towards or having PE licensure is a plus., • Minimum 5 years of experience in electrical engineering within an A/E consulting firm, or closely related industry., • Experience with building system design. Healthcare experience is strongly preferred., • Proficiency in AutoCAD and Revit is required., • Familiarity with electrical modeling programs (e.g., AGi32 for lighting, SKM for power analysis) is required., • Understanding of national, state, and local electrical codes., • Strong organizational, communication, and problem-solving skills., • Ability to work on multiple projects simultaneously and meet deadlines. Salary Range: $85,000 - $125,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Why Join Us? • Collaborative team environment with mentorship opportunities., • Exposure to a variety of building projects in different industries., • Competitive salary and hybrid work flexibility., • Support for professional development and career growth. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description International Broker / Tarif Analyst Location: Buffalo, NY, Phoenix or Goodyear, AZ (On-Site) Department: Supply Chain & Logistics Employment Type: Full-Time | Exempt About GTI Fabrication GTI Fabrication is a leader in industrial modular fabrication, serving the energy, defense, and heavy industrial markets. With operations in New York and Arizona, GTI designs and builds containerized energy systems, power distribution units, and modular enclosures that are shipped globally to support mission-critical projects. As we expand our global footprint, we are strengthening our logistics and compliance functions to ensure our imports, exports, and material flows meet all international regulations while maintaining cost efficiency and operational speed. Position Overview The International Broker / Tarif Analyst is responsible for ensuring all GTI imports and exports comply with applicable international trade laws, regulations, and documentation standards. This role involves classifying goods under international tarif schedules, preparing and reviewing customs documentation, coordinating with freight forwarders and customs brokers, and managing trade compliance to minimize duties, delays, and costs while maintaining full legal compliance. The ideal candidate has a strong understanding of HTS classification, INCOTERMS, U.S. Customs regulations, and import/export logistics, along with experience supporting a manufacturing or distribution environment. Key Responsibilities • Ensure compliance with all U.S. and international trade regulations, including U.S. Customs, EAR, and ITAR as applicable., • Classify goods using Harmonized Tarif Schedule (HTS) and Schedule B codes to determine proper duty rates and reporting requirements., • Prepare and review import/export documentation, including commercial invoices, packing lists, certificates of origin, and shipping declarations., • Coordinate with freight forwarders, customs brokers, and carriers to ensure timely and compliant clearance of shipments., • Analyze and manage tariff and duty exposure, identifying opportunities to minimize landed costs through proper classification or trade agreements (e.g., USMCA)., • Maintain accurate import/export records in accordance with CBP regulations and internal audit requirements., • Monitor regulatory changes and communicate updates to internal stakeholders., • Collaborate with procurement, logistics, and operations teams to ensure proper documentation, labeling, and country-of-origin compliance., • Support audits, investigations, and corrective actions related to customs or trade compliance issues., • Bachelor’s degree in Supply Chain Management, International Business, or related field., • 3–7 years of experience in customs brokerage, tarif analysis, or import/export compliance., • Strong knowledge of HTS classification, INCOTERMS, and customs documentation., • Familiarity with U.S. import/export regulations (CBP, EAR, ITAR) and documentation requirements., • Experience coordinating shipments with freight forwarders and customs brokers., • Excellent analytical, organizational, and problem-solving skills., • Strong attention to detail and documentation accuracy., • Proficiency with Microsoft Excel and ERP systems (NetSuite preferred)., • Licensed U.S. Customs Broker or equivalent certification., • Experience supporting manufacturing, energy, or defense-related exports., • Knowledge of free trade agreements (USMCA, CAFTA, etc.) and preferential duty programs., • Full-time, on-site position based in Buffalo, NY., • Work performed primarily in an office environment with occasional visits to manufacturing or logistics areas.

Job Description Title: DC Power Technician Location: Buffalo, NY and surrounding areas Pay rate: $25 -$35 Scope of Work: Install, test, and commission DC power systems including battery banks, rectifiers, and distribution panels. Perform routine maintenance and load testing of DC batteries (VRLA, NiCad, Lithium-ion, etc.). Troubleshoot and repair DC power equipment to ensure optimal performance. Monitor and log power system performance and report issues or trends. Follow technical drawings, manuals, and specifications for equipment setup. Adhere to safety standards, codes, and regulations in all work activities. Maintain documentation for work performed, including test results and service records. Travel to customer sites and work independently or as part of a team. Provide emergency support and participate in on-call rotations if required. Travel Details: Must use own vehicle .45 per mile (only gets mileage from home to site, site to site, site to home) (not hotel to site if staying overnight in a hotel) $125 a day per diem and tech books own hotel (must provide receipts for hotel to prove staying overnight somewhere) About Us: At Anistar Technologies, we connect individuals from a variety of industries with respected companies, both nationally and internationally. Each day, our Recruiters are presenting our clients with talented industry professionals for their most in-demand positions. To accomplish this, the Anistar staffing team will invest the time to understand your goals, work experiences, and career objectives. To search for other exciting opportunities in your area, visit our website at . Anistar Technologies is an Equal Opportunity Employer and is dedicated to fostering diversity in the workplace. Anistar utilizes E-Verify. Interested Candidates, click “Apply”, or contact the Anistar office at the number listed below. Anistar PAYS YOU for referrals!!!!!!!! If you know any qualified job seekers looking for work, we want to talk with them! Call us to find out more information regarding our referral placement program! Contact: Anistar Technologies PH: 800-750-3843 Fax: 888-293-5055 #THO

Job Description 2nd Shift Electrician – Industrial Manufacturing (3:30 PM–12:00 AM) Location: Buffalo, NY Schedule: 2nd Shift — 3:30 PM to Midnight, Monday–Friday Employment Type: Full-Time | Overtime Available Job Overview We are seeking an experienced 2nd Shift Electrician to support our industrial manufacturing operations. The Electrician will install, maintain, troubleshoot, and repair electrical systems, wiring, panels, lighting, motors, controls, and equipment in a fast-paced production environment. This role is ideal for someone with strong industrial electrical experience who enjoys hands-on work, problem-solving, and working independently on 2nd shift. Key Responsibilities As a 2nd Shift Electrician, you will: • Install, maintain, repair, and upgrade electrical systems, wiring, circuits, motors, panels, and components, • Diagnose electrical issues using multimeters, testing tools, and electrical schematics, • Perform preventive maintenance, electrical inspections, and equipment calibration, • Read and interpret electrical blueprints, diagrams, and schematics, • Test electrical systems to ensure proper function and safety compliance, • Document repairs, maintenance logs, inspections, and service information, • Maintain inventory of electrical parts, supplies, and materials, • Ensure all work meets electrical codes, safety standards, and company requirements, • Troubleshoot and repair equipment issues quickly to reduce downtime, • Support production equipment, lighting, controls, power distribution, and facility electrical systems, • Perform overtime as needed to support production demands Required Qualifications • Completion of an Electrician Apprenticeship Program (required), • Technical or trade school training in Electrical Technology (preferred), • 3–5 years of electrician experience — industrial or manufacturing environment highly preferred, • Strong working knowledge of electrical theory, NEC codes, wiring methods, and electrical safety, • Ability to read and interpret blueprints, schematics, electrical diagrams, and ladder logic basics, • Skilled in using electrical hand tools and power tools, • Ability to lift 50 lbs and perform bending, kneeling, climbing, and working at heights, • Valid driver’s license, • Willingness to work overtime as required Preferred Experience • Industrial electrician or maintenance electrician experience, • Experience with motors, VFDs, control panels, electrical enclosures, conduit bending, PLC basics, • Electrical experience in manufacturing, fabrication, or industrial facilities, • Preventative maintenance program experience, • Low voltage and high voltage experience Why Apply? • Steady 2nd shift schedule (3:30 PM – Midnight), • Competitive pay + shift differential, • Overtime opportunities, • Growing industrial manufacturing environment, • Advancement opportunities into Maintenance, Controls, or Facilities roles GTI Fabrication is an equal opportunity employer committed to a diverse and inclusive workplace. Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job Description Pay: $22.00 - $42.00 per hour Job description: 1st Shift Electrician – Industrial Manufacturing (7:00 AM–4:00 PM) Location: Buffalo, NY (On-Site) Schedule: 1st Shift — 7:00 AM to 4:00 PM, Monday–Friday Employment Type: Full-Time | Overtime Available Job Overview We are seeking an experienced 1st Shift Electrician to support our industrial manufacturing operations in Buffalo, NY. The Electrician will install, maintain, troubleshoot, and repair electrical systems, wiring, panels, motors, controls, and production equipment in a fast-paced fabrication and assembly environment. This role is ideal for candidates with strong industrial electrical experience, problem-solving ability, and hands-on expertise working in a manufacturing or fabrication facility. Key Responsibilities As a 1st Shift Industrial Electrician, you will: • Install, maintain, repair, and upgrade electrical systems, wiring, circuits, motors, panels, and components, • Diagnose electrical issues using multimeters, testing tools, and electrical schematics, • Perform preventive maintenance, electrical inspections, and equipment calibration, • Read and interpret electrical blueprints, diagrams, and schematics, • Test electrical systems to ensure proper function, safety, and code compliance, • Document repairs, maintenance logs, inspections, and service activities, • Maintain inventory of electrical supplies, spare parts, and materials, • Ensure all work meets NEC codes, OSHA safety standards, and company requirements, • Support production equipment, lighting systems, control panels, power distribution, and facility electrical needs, • Respond quickly to production equipment failures to minimize downtime, • Completion of an Electrician Apprenticeship Program (required), • Technical or trade school training in Electrical Technology (preferred), • 3–5 years of electrical experience—industrial or manufacturing strongly preferred, • Strong working knowledge of electrical theory, NEC codes, wiring methods, and electrical safety, • Ability to read electrical schematics, blueprints, wiring diagrams, and basic ladder logic, • Proficiency using electrical hand tools and power tools, • Ability to lift 50 lbs and perform physical tasks (bending, kneeling, climbing, working at heights), • Valid driver’s license, • Industrial electrician or maintenance electrician background, • Experience with motors, VFDs, control panels, electrical cabinets, conduit bending, • Familiarity with PLC-controlled equipment and basic troubleshooting, • Electrical experience in metal fabrication, modular construction, or industrial facilities, • Preventative maintenance experience (PM programs, calibration, inspections), • Steady 1st shift schedule (7:00 AM – 4:00 PM), • Competitive pay, • Overtime opportunities available, • Growing industrial and modular manufacturing environment Job Type: Full-time Work Location: In person Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

It takes hard work and smarts to get you into the reactor room. But if you have a strong interest in math, chemistry, physics and engineering, you might just have what it takes to be a Machinist's Mate Nuclear. As an MMN, you are the Navy's nuclear reactor mechanic. It is your responsibility to perform all maintenance on the steam-powered propulsion plants aboard aircraft carriers and submarines to ensure our fleet can move safely. And your hard work can lead to great rewards. As an MMN, you'll be eligible to receive up to a $40,000 bonus for first-time enlistment. Re-enlistment bonuses are also available. Think you have what it takes to make a nuclear-powered ship run? Want to start your journey with the Navy? Apply Now Enlisted None What to Expect Machinist's Mate Nuclear More Information Responsibilities Nuclear Machinist's Mates operate and maintain steam turbines and reduction gears used for nuclear ship propulsion and auxiliary machinery such as turbogenerators, pumps and oil purifiers. They also maintain auxiliary machinery outside of main machinery spaces, such as electrohydraulic steering engines and elevators, refrigeration plants, air conditioning systems and desalinization plants. They may also operate and maintain compressed gas producing plants. Nuclear-trained MMs perform duties in nuclear propulsion plants operating reactor control, propulsion and power generation systems. Work Environment As a Machinist's Mate Nuclear, you'll have the opportunity to work at sea or ashore. Your assignment could also place you in an intense, fast-paced environment aboard a nuclear-powered submarine or aircraft carrier. Learn more about submarine service and life on a ship. Training & Advancement Upon completion of initial training at Recruit Training Command Great Lakes, (known as Boot Camp), those pursuing a Machinist's Mate Nuclear role report to "A" School in Charleston, SC, for six months. Here, they develop a working knowledge of technical mathematics and power distribution. Students learn to solve basic equations using phasors, vector notations and basic trigonometry and analyze DC and AC circuits. They also learn how to operate electrical equipment using controllers, and how to properly test, maintain, troubleshoot, and repair electrical circuits, motors and other related electrical equipment. From there, MMNs move on to Naval Nuclear Power School (NNPS), also in Charleston, SC. Here they learn theory and practical application of nuclear physics and reactor engineering. The six-month course provides a comprehensive understanding of a pressurized-water Naval nuclear power plant, including reactor core nuclear principles, heat transfer and fluid systems, plant chemistry and materials, mechanical and electrical systems, and radiological control. Following NNPS, MMNs begin prototype training in their rating specialty at one of two Nuclear Power Training Units (NPTUs) - located in Charleston, SC, and Ballston Spa, NY. This six-month course teaches the fundamentals of a Naval nuclear power plant and the interrelationship of its mechanical, electrical, and reactor subsystems. Students develop oral communications skills, obtain an understanding of nuclear radiation, and gain knowledge of the safe operation of a complex Naval nuclear power plant. In Nuclear Operations, promotion opportunities are regularly available but competitive and based on performance. Post-Service Opportunities It's also important to note that specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian sector. Education Opportunities Beyond offering access to professional credentials and certifications, Navy technical and operational training for a Machinist's Mate Nuclear can translate to credit hours toward a bachelor's or associate degree through the American Council on Education. You may also continue your education through undergraduate degree opportunities like the Navy College Program and Tuition Assistance and the Post-9/11 GI Bill. Qualifications & Requirements A high-school diploma or equivalent is required to become an Enlisted Sailor and Machinist's Mate Nuclear in the Navy. Those seeking a role as a Machinist's Mate Nuclear must be U.S. citizens with successful completion of one year of Algebra, and who can meet eligibility requirements for a security clearance. General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before. Part-Time Opportunities There are no part-time jobs as a Navy Reserve Sailor in this role. Go back to Careers to find other jobs that have a Reserve component. You can also find out more about what life is like as a Reserve Sailor in the Navy. Compare Navy Careers See how a career as a Machinist's Mate Nuclear compares to other Navy jobs. Compare roles, pay and requirements for each job now.

Job Description Lead Manufacturing Project Manager Location: Buffalo, NY (On-Site) Department: Manufacturing Operations Reports To: Business Unit Director Direct Reports: 5–6 Project Managers and Senior Project Managers About GTI Fabrication GTI Fabrication designs and manufactures complex modular systems, structural steel assemblies, and containerized solutions for defense, energy, and industrial customers. With a rapidly expanding manufacturing footprint, GTI delivers highly engineered, build-to-order products that require precise coordination and world-class execution from concept to shipment. As GTI’s project portfolio grows, we are investing in senior leadership roles capable of driving consistent performance across multiple high-stakes customer programs. Position Overview The Lead Manufacturing Project Manager is a senior-level leader responsible for managing a team of Project Managers and Senior PMs, ensuring consistent and disciplined execution across a portfolio of manufacturing programs. This role combines strategic oversight, operational leadership, and hands-on project governance. The Lead PM ensures project teams deliver on scope, schedule, budget, risk mitigation, customer communication, and manufacturing readiness — while driving continuous improvement across GTI’s project management function. This role is suited for a highly experienced project leader who thrives in fast-paced industrial environments and excels at leading other project managers. Key Responsibilities Leadership & People Management * Directly lead, mentor, and develop a team of 5–6 Project Managers and Senior Project Managers. * Define performance expectations, set goals, conduct reviews, and build a high-performance PM team. * Oversee project assignments, capacity planning, and workload distribution. * Coach PMs on customer management, production alignment, communication, and escalation techniques. * Establish standardized processes, templates, governance routines, and execution methodologies across the PM organization. Program Governance & Execution Oversight * Provide executive-level oversight for all active manufacturing programs within the business unit. * Monitor project performance across timeline adherence, cost variance, production readiness, and deliverable quality. * Lead executive-level reviews and enforce disciplined adherence to GTI’s PM framework. * Identify systemic risks or resource constraints and escalate to leadership with recommended solutions. * Partner with Production, Engineering, Quality, Supply Chain, and Business Unit Directors to maintain smooth execution. Customer Leadership & Communication * Serve as the senior escalation point for key customers during project execution. * Oversee PM-led customer communications, ensuring accuracy, professionalism, and alignment with contract expectations. * Participate in major customer reviews, factory acceptance tests (FAT), and milestone approvals as needed. * Ensure all customer requirements, documentation, and deliverables are met on schedule. Reporting, Metrics & Continuous Improvement * Build and oversee portfolio-level dashboards, schedule trackers, and risk logs. * Review PM-submitted reports for accuracy and early risk identification. * Track KPIs such as: * Schedule adherence * Throughput & bottlenecks * Budget vs. actuals * Change order impact * Customer satisfaction * Lead “lessons learned” and drive cross-functional improvements to engineering, production, documentation, and scheduling processes. Required Qualifications * 8–12 years of project management experience in manufacturing, fabrication, industrial equipment, or production environments. * 2–5 years of formal leadership experience managing Project Managers or Senior PMs. * Strong grasp of: * Production flow * Fabrication and assembly processes * Material dependencies and scheduling * Manufacturing change management * Demonstrated ability to lead multiple high-complexity projects simultaneously. * Advanced communication, negotiation, and stakeholder management skills. * Experience with MS Project, Smartsheet, or other advanced scheduling tools. * Strong data orientation — capable of reviewing dashboards and KPIs to drive action. Preferred Qualifications * Background in metal fabrication, modular construction, welding operations, or containerized structures. * ERP experience (NetSuite preferred). * Power BI or Tableau reporting experience. * PMP, Lean Six Sigma, or equivalent certification. * Experience scaling a PM team or installing a project governance framework. Why Join GTI Fabrication * Lead an expanding project management organization with high visibility across GTI’s executive team. * Influence strategic decision-making tied to production throughput, delivery performance, and customer success. * Work in a fast-growing, highly technical industrial manufacturing environment. * Competitive compensation and leadership-track advancement opportunities.