Site supervisor jobs in Buffalo, NYCreate job alerts

Job Description Join our team as a Test Technician and bring your mechanical and electrical skills to the next level! Location: Tonawanda, NY Pay Rate: $60K-$73K(Based on experience) - Up to $85K for engineering graduates Position Type: Full-Time, Permanent This role is primarily based in our on-site testing facility; however, it requires up to 25% travel. Typically, this includes weekly visits to customer installation sites to support equipment testing, troubleshooting, and commissioning. Travel is planned and coordinated in advance to ensure minimal disruption to in-shop responsibilities. What You’ll Do: • Provide support to the Test Supervisor during machine testing activities, • Guide junior test technicians in procedures and troubleshooting, • Perform mechanical and electrical testing on systems and equipment, • Calibrate instruments and equipment required for testing procedures, • Record, document, and maintain test data; support ISO 9000 documentation as needed, • Identify and correct faulty components and test failures, • Detect and resolve software-related malfunctions, • Contribute to the continuous improvement of equipment quality, • Verify that nameplates, safety labels, and documentation are correctly applied, and that the equipment is ready for shipment, • Support the Project Manager during customer visits and operational training sessions, • Ensure that all testing procedures are completed in accordance with defined quality requirements, • Associate degree in electrical or mechanical engineering with 3–5 years of relevant experience, or 5–10 years of hands-on technical experience, • Experience with electrical systems, controls, and software troubleshooting, • Strong communication skills and ability to work effectively with customers and shop personnel, • Excellent organizational skills and the ability to communicate clearly, both verbally and in writing, • Familiarity with ISO 9000 standards and documentation processes, • Experience supporting customer-facing training or demonstrations, • Experience with refrigeration systems, • Experience with validation and testing procedures for complex industrial equipment ABOUT US: PrideNow is Pride Global's light industrial staffing organization, a distinguished division within the Pride Global umbrella. Aligned with the overarching mission of Pride Global, we specialize in delivering top-tier human resources and workforce solutions to the light industrial industry. Leveraging the strength of our global network, PrideNow is dedicated to empowering diversity, ensuring compliance, and driving unparalleled success for businesses. As part of the Pride Global family, we bring forth a commitment to excellence and a comprehensive approach to meeting the unique staffing needs of our clients worldwide. Welcome to PrideNow, where our local expertise seamlessly integrates into the global excellence of Pride Global, shaping a future of dynamic workforce solutions. BENEFITS DISCLOSURE: Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - offer eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors. EEO STATEMENT: As a certified minority-owned business, Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - are committed to creating a diverse environment and are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics.

Job Description Location This role is based out of the city of Buffalo, NY. Most duties such as performing jobsite visits to work with various clients at their locations for sales quotes and technology-based services are performed in the field. Remaining administrative tasks, such as preparing sales quotes, processing customer contracts and paperwork, will be performed on-site at the office. Job Summary We are seeking a dynamic and results-driven Account Executive with a strong working knowledge of different burglary alarm systems, CCTV and fire alarm equipment. This role involves a combination of new, commercial client acquisitions, acting as the main point of contact, and maintaining relationships with newly established clientele. As an Account Executive with Eastern Security Services, you will play a pivotal role in identifying and pursuing new business opportunities, nurturing client relationships, promoting the adoption of our advanced technology solutions, and driving sales growth. Salary Range $60.000 per year - $70.000 per year, based on experience, plus commissions Responsibilities • Utilize technical expertise to understand client requirements and recommend appropriate solutions., • Effectively communicate the technical features and benefits of products or services to residential and commercial clients., • Conduct product demonstrations to highlight key features and benefits for potential solutions., • Prepare detailed sales proposals to showcase the technical aspects and value proposition of our products or services., • Serve as the primary point of contact for clients, addressing their concerns and ensuring satisfaction., • High School Diploma or Equivalent, • Strong interpersonal skills, both oral and written., • Proficiency of the Microsoft Office Suite (Word, Excel, PowerPoint)., • Solid organization and priority management skills., • Two-year Degree, • 5 years of Alarm Industry experience, • Medical, Dental, Vision, Life & Disability Insurance, • 401k with 401k match, • Paid Vacation and Sick Time, • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor.

Job Description3rd Shift Quality Assurance Technician Buffalo, NY 3rd Shift: 10:45 PM – 7:00 AM, Sunday through Thursday nights $21-$24/hour and Benefits Include - Health, Dental, and Vision insurance, 401K, Paid holidays and vacations, Tuition reimbursement program, Quarterly bonuses, Subsidized cafeteria costs, Peer recognition initiatives, Summer scholarships for children and grandchildren of employees, On-site gym Job Summary The QA Technician inspects materials and products for conformance to specifications, using variable, fixed or preset measuring equipment. Job Duties • Compares product with parts list, blueprints, specifications or sample model to insure completion and correctness of the assembly or subassemblies., • Verifies specified dimensions using proper test equipment and procedures., • Identifies rejected parts with prescribed methods., • Tests products for structural flaws., • Maintains records on all defects and number of parts rejected., • Uses statistical sampling plans when required to conduct inspections., • Assists in training new technicians, when required., • Responsible for general housekeeping of work area., • Interacts with customer as required., • Assist engineers during investigations of failures (root cause analysis) as required., • Demonstrates Company core values of honesty, integrity, and respect, • Other duties as assigned.Impact, • Monitors inspections to ensure compliance of processes and testing required to maintain quality and reliability of products., • Recommends improvements to Quality Assurance processes, QAS's, and manufacturing processes., • Following all rules, regulations and procedures set forth in the safety manual., • Promoting safety awareness throughout the workplace., • Alerting supervisors to any safety hazards they discover., • Wearing appropriate, proper protective equipment whenever required., • Using guards on tools and machinery whenever required., • Following proper lifting techniques using legs and not the back., • Operating any vehicles, equipment, tools or machines only if they are authorized to do so., • Reporting any injury or loss immediately to the supervisor/team lead., • Promoting a positive attitude about safety and never performing any unsafe practice that could place the employee or others in danger., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.Analysis/Problem Solving, • Ability to use common sense and knowledge of industry to handle daily questions/issues from workers, managers, customers, etc., • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry., • Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Ability to troubleshoot inspection equipment/instrument interactions using reference materials available (STM, SOP, Operators Manual).Communication, • Ability to read and comprehend simple instructions, short correspondence, and memos., • Ability to write short correspondence., • Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.Skills/Technical Skills, • Basic computer skills associated with traditional PC based software such as Microsoft Office and Lotus Notes required., • Ability to comprehend and interpret basic measurement techniques including reading scales (rulers)., • Basic understanding of dimensional inspections with familiarity of using calipers and micrometers., • Ability to read and interpret blueprints, to include discerning specification (in tolerance / out of tolerance) and converting fractions and decimals.Knowledge, • Working knowledge of inspections/audits, standard operating procedures, and ISO standards a plus., • Basic understanding of Geometric Dimensioning and tolerancing and cycle counting a plus.Physical Requirements, • While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee frequently is required to walk, sit, reach with hands and arms, and talk or hear. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 35 pounds, and occasionally lift and/or move up to 50 pounds. In the event the employee must move over 35 pounds, a team lift or mechanical devise must be used. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.Education, • High School Diploma., • One-year certificate from College or technical school is preferred.Experience Pay Details: $21.00 to $24.00 per hour Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Site Supervisor Job Title: Site Supervisor Reports to: Licensed Housing Coordinator Job Category/ EEO: Exempt, FT 12 months, on call, Manager Department: Residential Services Remote: No Pay Range: $60,406 Position Purpose The Site Supervisor is directly responsible for overall client care and facility maintenance within assigned residence sites. The Site Supervisor has primary responsibility for supervision of direct care staff and for development, implementation, and review of Individual Service Plans. Reporting Relationships The Site Supervisor reports directly to the Site Coordinator. PRINCIPAL DUTIES AND RESPONSIBILITIES • Assure that standards of housekeeping, maintenance, health, safety and general appearance of the residence are met; inspect facilities on a regular basis and report necessary repairs and equipment replacement in a timely manner., • Prepares for Office of Mental Health site visits, by ensuring that sites and charts are always in audit ready condition., • Implement Agency medication administration policy and procedure., • Implement fire safety procedures including monthly, unannounced fire drills., • Review daily notes on a regular basis., • Promptly report any identified problems., • Ensures that the programs have the staffing, competencies, and ongoing professional education and development required to serve clients and deliver on contractual obligations., • Assure that the rights and dignity of residents are maintained at all times; assure that resident grievances are processed in a timely manner., • Orient new residents and complete required paperwork., • Develop and implement Individual Service Plans. Regularly and routinely document resident progress toward goals in accordance with Agency policy., • Assist with management of resident discharges., • Develop and maintain effective working relationships., • Assure timely reporting and review of untoward incidents and events., • Participate in regular and unplanned meetings., • Initiate emergency procedures when indicated., • Plan and implement resident activities., • Direct menu planning, food shopping and meal preparation, in cooperation with residents., • Always ensure necessary and appropriate site coverage., • Provide ongoing feedback to staff regarding work performance., • Conducts regular staff meetings., • High School diploma plus five (5) years' experience in Human Service-related field., • Able to demonstrate at least (1) one year of supervisory experience., • Evidence of commitment, sensitivity, and creativity in working with and for individuals with handicapping disabilities, • Experience in developing service plans and conducting assessments., • Must have a flexible schedule., • NYS Driver's license with evidence of good driving record, • Ability to work independently and initiate change., • Possess an even temperament., • Have strong organizational and time management skills., • Work effectively within a team setting., • Have strong data management and analysis skills., • Have superior interpersonal skills in collaborating with other providers and consumer centered community support systems., • Have superior conflict resolution skills., • Value cultural difference, collaborative efforts, and person-centered services., • Demonstrate excellent verbal and written skills.

Job DescriptionService Field Supervisor CentiMark Corporation is North America's leading commercial and industrial roofing contractor. CentiMark offers a full complement of new and replacement roof systems including single-ply EPDM rubber, single-ply thermoplastics, modified bitumen, built-up roofing, metal roofing, spray polyurethane foam and roof maintenance coatings. We are currently seeking a Service Field Supervisor in the Buffalo, NY area. $28-$35 an hour depending on experience! Job Responsibilities • Supervise multiple Service crews, • Responsible for doing pre-job and post-job inspections, • Planning jobs for labor crews, • Responsible for setting up and maintaining a safe job site, • Daily communication with the customer, • Work closely with the Warehouse Manager to order materials for the projects Job Qualifications • Requires excellent leadership, communication, analytical, interpersonal, organizational and problem solving skills, • A valid driver’s license (in good standing) is required, • 3+ years supervisory experience in roofing / construction, • Good working knowledge of roofing procedures and safety, • Health Insurance Plans:, • Free “Core Plan” – Free Medical & Dental, • “Buy Up Plan” – Features a lower deductible for Medical, • Vision Plan, • Free Life Insurance, • Traditional 401K with Company Match, • Roth IRA with Company Match, • Free Employee Stock Ownership Program (ESOP), • Company Vehicle, • Flexible Spending Account (FSA) CentiMark provides a great work environment with challenging career opportunities. Drug Free Workplace - EOE (M/F/V/D) - E-Verify Employer For more information, please visit our website -- Powered by JazzHR ZNZ923FaMQ

Job Description Now Hiring Hybrid Manufacturing Software Validation Engineer in Buffalo, NY! Salary Range: $80k-$90k Benefits Include - Health, Dental, and Vision insurance, 401K, Paid holidays and vacations, Tuition reimbursement program, Quarterly bonuses, Subsidized cafeteria costs, Peer recognition initiatives, Summer scholarships for children and grandchildren of employees, On-site gym Job Summary The Software Quality Engineer ensures the compliance of computerized systems validation (CSV) according to applicable procedures, regulations and industry standards. Their primary responsibility is to evaluate computerized systems based on applicability, functionality, and process and product safety. They will support management and maintenance of the software inventory and will provide support to all Company Product Facilities in the Computerized System Validation Process. Job Duties * Implements and analyzes the applicability of the different norms and standards in the introduction and development of software for manufacturing processes, quality management systems, engineering, and support processes. * Participates on and supports engineering teams in projects for the introduction and development of manufacturing processes, quality management systems, and software. * Effectively leads, participates on, and/or monitors cross-functional teams related to CSV process/product improvement as required. * Develops quality plans, manufacturing, risk analysis, and process mapping related to the implementation of computerized systems. * Leads and/or supports the development and implementation of risk analysis tools, development controls, software verification, validations, test methods, procedures and work instructions, and new technologies related to computerized systems. * Ensures and participates in the application of quality controls during engineering runs, validation, production and design transfers. * Supports the qualification of new suppliers related to the development of computerized systems for manufacturing processes, quality management systems, engineering, and support departments. • Responsible for updating and implementing improvements to the software validation system and procedures. * Complies and writes training material and conducts training sessions on CSV process and activities. * Communicates with and addresses customer concerns as necessary. * May conduct internal audits and support external audits when necessary. * Demonstrates Company core values of honesty, integrity, and respect. * Other duties as assigned. Impact * Recommend/create processes/procedures improvements * Analyze potential areas for savings or efficiencies. Safety Responsibilities * Following all rules, regulations, and procedures set forth in the safety manual. * Promoting safety awareness throughout the workplace. * Alerting supervisors to any safety hazards they discover. * Wearing appropriate, proper protective equipment whenever required. * Using guards on tools and machinery whenever required. * Following proper lifting techniques using legs and not the back. * Operating any vehicles, equipment, tools, or machines only if they are authorized to do so. * Reporting any injury or loss immediately to the supervisor/team lead. * Promoting a positive attitude about safety and never performing any unsafe practice that could place the employee or others in danger. * Providing information to their immediate supervisor if a better and safer procedure can be implemented in performing any operation. * Assure when designing or modifying equipment/workstations that ergonomics and safety are reviewed and work to minimize hazards through engineering controls, administrative controls, and lastly personal protective equipment. * Assure Job Hazard and Equipment Hazard Analysis are completed timely as required. Independent Judgment * Decide which projects are priority relative to company goals. * Determine best-in-class frameworks, systems, and processes. Analysis/Problem Solving * Ability to read, analyze, and interpret the most complex documents. * Ability to find root causes and determine potential solutions. * Ability to comprehend and apply principles of advanced calculus, modern algebra, and advanced statistical theory. * Ability to work with concepts such as limits, rings, quadratic and differential equations, and proofs of theorems. * Ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems. * Ability to deal with nonverbal symbolism (formulas, scientific equations, graphs, musical notes, etc.) in its most difficult phases. * Ability to work with a variety of abstract and concrete variables. Communication * Ability to respond effectively in writing and verbally to the most sensitive inquiries or complaints. * Ability to make effective and persuasive speeches and presentations on controversial or complex topics to top management, customers, public groups, and/or boards of directors. Skills/Technical Skills * ASQ, CQE or other relevant certification is a plus. * Communication Skills. * Working knowledge of traditional PC-based software such as Microsoft Office. * Requires an above-average people skills ability. Knowledge * Understands regulated type industries * Knowledge of medical device manufacturers and suppliers’ knowledge preferred. * World-class manufacturing knowledge preferred. Physical Requirements * While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; talk or hear; and taste or smell. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Education * Bachelor’s Degree (B.A. or B.S.) from a four-year college or university. Experience * Minimum of 3 years of experience working with computerized systems validation. * Minimum 1-3 years working in a manufacturing environment in the medical device industry is preferred. If you meet the above qualifications and would like to apply for this position, please click APPLY NOW and upload your most current resume or you may email your resume to our recruiter, Christine Hannon at Please include SOFTWARE on the subject line of any e-mail correspondence. Questions regarding this position can be addressed by emailing. Thank you in advance for applying, however, only qualified candidates will be contacted. For great opportunities near you, go to today! Pay Details: $80,000.00 to $90,000.00 per year Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is seeking an experienced Senior Project Engineer in the Buffalo, Rochester, or Syracuse, NY offices to support our growing railroad practice. You will be part of a team working on projects from conception through final design and construction. This position is diversified with opportunities to work in the office on the engineering design of railroad infrastructure and in the field with construction inspection/administration. You will work on a variety of designs and projects with the opportunity to learn and grow throughout your career at C&S. Position Responsibilities • Ability to work with internal and external staff on an individual and team basis., • Ability to motivate and mentor junior staff., • Strong written and oral communication, organizational, and interpersonal skills., • Ability to manage all aspects of smaller projects or assigned tasks as part of a larger overall project., • Work with team in Client relationship management and obtaining additional business opportunities., • Ability to challenge oneself and broaden knowledge base., • Willingness to be proactive and anticipate., • May require occasional travel away from the office, estimated 15%., • Utilize safe work practices in accordance with federal, state, local, and company standards., • B.S. in Engineering field, M.S. in related Engineering field a plus., • Registration as a Professional Engineer (P.E.)., • 10 or more years of railroad related design and construction experience., • Experience with preparation of contract documents from bidding though design and award., • Experience with AREMA Manual for Railway Engineering. Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. As an employee working on railroad related assignments with the need to occasionally visit railroad properties, you will be enrolled in our drug and alcohol testing program as mandated by the Federal Railroad Administration’s (FRA) 49 CFR 219 Drug and Alcohol Testing Requirements Program. A Candidate’s employment is contingent upon successful results of the test which will be covered and administered by C&S’s provider. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. The Environmental, Health and Safety (EHS) Manager leads the development, implementation, and continuous improvement of the EHS programs at our fluid dairy manufacturing facility. This role is responsible for ensuring full regulatory compliance with occupational health, safety, and environmental laws while cultivating a strong, proactive safety culture and driving sustainability initiatives. The EHS Manager partners with plant leadership, operations, maintenance, and quality teams to ensure safe, clean, and compliant operations. Key Responsibilities: Health & Safety: • Oversee site compliance with OSHA standards, industry best practices and meet organizational goals for overseeing the Safety Management Operating System (SMOS), • Conduct incident investigations and lead root cause analysis and corrective action implementation, • Provide site-specific safety training and development across all teams, • Involvement in daily huddle meetings to provide a safety department presence and message, • Develop individual- and plant-focused SMART goals from high-level initiatives, • Daily walkthroughs to ensure boots on the ground with a focus on behavior and adherence to safe work practices, • Engaging with personnel to promote worker participation in proactive safety, • Review and prioritize Open Action Items and update status, • Review and follow up of near misses and hazard recognition in the facility, • Review weekly Supervisor Audits and ensure that follow-up actions are added to the Action List in Teams and addressed, • Oversee and facilitate the implementation of safety programs and procedures, • New Employee Safety Orientations, • Implement the health and safety program requirements at the facility, • Assisting with the development of Lockout/Tagout procedures, • Perform proactive safety functions, • Audit completion of the required safety documentation like pre-shift inspections on PITs, • Develop Job Hazard Analysis (JHA) for plant operations, • Develop One Point Lessons as necessary, • Oversee Monthly Safety Committee Meeting, • Ensure that OSHA 300 log is current and properly maintained, • Identify and Implement Weekly Toolbox Topics, • Perform and document Monthly Safety Manager Compliance Tasks, • Ensure facility compliance with all applicable environmental laws and regulations (EPA, Clean Water Act, Clean Air Act, RCRA, etc.)., • Manage environmental permits including air, wastewater, stormwater, and waste management., • Conduct routine site inspections, environmental audits, and risk assessments., • Develop, implement, and monitor environmental programs including spill prevention, waste reduction, and recycling initiatives., • Prepare and submit regulatory reports (e.g., Tier II, TRI, DMRs, annual emissions inventory)., • Liaise with local and federal environmental agencies as needed., • Serve as the site’s environmental subject matter expert during inspections and audits., • Maintain accurate records of all environmental documentation, permits, and compliance activities., • Collaborate with operations, maintenance, and engineering teams to incorporate environmentally sound practices in day-to-day operations., • Lead environmental incident investigations and root cause analysis., • Develop and deliver environmental compliance training to plant personnel. Work within a union environment among a cross-disciplinary population. Must be able to work individually and in a team setting. Organize and manage time and competing priorities. Flexibility to train and meet with staff overnight or afternoon shifts. On-call 24/7/365 with duties shared among coworkers. The team includes technical and administrative managers, engineers, trade professionals, administrators, financial professionals, and laboratory scientists. The above requirements represent the knowledge, skill, and ability required. Reasonable accommodations are available to enable individuals with disabilities to perform essential functions. Education and experience: • A BS degree in Safety Engineering, Industrial Hygiene, Sciences, Business, Health or in a related field. MS in EHS or an MBA degree is preferred., • Five plus years’ experience in manufacturing or industrial setting preferred, • Deep understanding of legal health and safety guidelines, • Understanding of environmental regulations and good practices, • Ability to produce reports and develop/manage relevant policies, • Good knowledge of data analysis and risk assessment, • Excellent organizational and motivational skills, • Outstanding attention to detail and observation ability, • Exceptional communication and interpersonal abilities, • Familiar with standard concepts, practices, and procedures within the health, safety, and environmental field., • Collaborative problem solver who understands the complexities of a manufacturing environment, • Certified Hazardous Materials Manager (CHMM), • Certified Environmental Manager (CEM) The EH&S Manager may be exposed to and entrusted with confidential information relative to production methods, customers, and company strategy. Management Responsibility: The EH&S Manager is a support function role that operates under the general direction of the Senior Director of EHS & PSM Compliance. Work Environment The EH&S Manager will support all facets of EHS at the facility including the plant and office environment. Must be capable of operating standard office equipment and seeing, grasping hold, walking, climbing, bending, stretching, and lifting up to 40 lbs. At times immersed in the plant production environment working near moving mechanical parts, corrosive chemicals, high-speed conveyors, and processing equipment where temperatures fluctuate, floors may be wet, and noise is a constant factor. Pay: $75k-$90k/yr.* *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Job Title: Quality Technician Department: Quality Reports To: Operations Manager Job Status: Full-time FLSA Classification: Non-Exempt Schedule: 7 a.m. – 4:30 p.m. Monday – Thursday, 7 a.m. – 11 a.m. Friday Salary Range: $50,000 - $60,000 annually Tectran Manufacturing Inc. is an industry-leading manufacturer and marketer of air, hydraulic, and electrical systems for the transportation industry. The primary market focus includes the heavy-duty tractor trailer and bus industries. Our commitment to quality and durability assures us a leading-edge in product designs and superior performance for demanding market applications. We hold several patents and make it a practice to listen closely to the needs of the customer. Job Summary We are currently looking for an individual to contribute their first-rate skills as Quality Technician in our Quality Department. This position includes the responsibility of examining and evaluating raw material, assemblies, and finished goods from overseas suppliers. The candidate in this position will play a role in the continuous development and improvement of Tectran’s Quality Management System. The successful candidate must be proactive, results-driven, self-motivated, and dedicated to excellence. Responsibilities: • Participate in improving our products, processes, equipment, and methods by performing inspections, testing, and evaluations, • Supervise compliance to all standards and specifications including ISO-9001, DOT, FMVSS and SAE standards as well as product regulatory requirements to Calif Prop 65, Reach, GADSL, RoHS, TSCA, and Conflict Minerals Reporting, • Facilitate non-conforming material (NCMR) disposition. Contain stock; coordinate rework activity (includes training, quality alerts and visual aids). Verify conformance to customer requirements. Support Material Review Board (MRB), • Assist in handling all customer returns for warranty including failure analysis, corrective action resolution with suppliers and/or Production and final dispositions., • Facilitate correction action procedure (CAR); support interim action, root cause, corrective action, preventative action, and implementation. Perform verification, • Develop and update inspection protocols and/or functional inspections on incoming materials, assemblies, and finished goods, • Create, revise, distribute, and file manufacturing instructions, standard procedures, process specifications, forms, and visual standards; ensuring the latest revision is controlled and used, • Write Technical Product Specifications and Data charts as needed for use in marketing and customer communications, • Communicate with our domestic and foreign suppliers regarding product evaluations and quality concerns, • Associate degree, Trade School, and/or Quality Inspection Certification preferred, • At least two (2) years’ experience in a manufacturing environment, • Experience in injection molding (preferred), • Experience in machining (preferred), • Experience working with ISO 9001 or other comparable Quality Systems, • Experience with product-failure analysis and material evaluations, • Experience with using inspection equipment, like CMM, optical comparators, hand measurement tools, • Electro-Mechanical equipment experience a plus, • Understanding of Manufacturing and Assembly Processes, • Read and interpret blueprints, • Ability to problem-solve, • Use various precision measuring devices, • Solid verbal and written communication skills, • Ability to work effectively with management, other associates, customers, and suppliers, • Computer proficiency in Microsoft Office Suite, • Employee will be required to wear the provided PPE per the role requirements, • Follow site safety and any department specific protocols, • Report safety hazards or potential safety hazards to reporting Supervisor, • Prolonged periods of sitting at a desk and working on a computer, • Must be able to walk the operations floor on a regular basis without difficulty, • Stand and bend without difficulty, • Opportunities for growth and advancement within the company, • PTO and 10 Paid Holidays (annually), • Health, Dental, Vision, Life and AD&D, and various voluntary insurance coverages, • 401(k) program with a company match, • Wellness program, • $500 referral bonus TECTRAN is an equal opportunity employer. We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors.

Job Description Under the general supervision of a site superintendent, responsible for all physical labor performed on the job for installation of a synthetic turf fields. Overnight travel is required for this position. ESSENTIAL FUNCTIONS • Assist in setting up field upon arrival., • Handle and place aluminum stencils for inlaid field markings., • Handle and place straight edge., • Cut turf with scissors and razor knives with precision., • Place turf markings & logos into hot glue., • Check seam quality and bond strength of glued turf., • Perform clean up around job site., • Assist with walk-through at job completion., • The duties listed above are basic and are not limited to this list, additional duties can be assigned. OTHER DUTIES AND RESPONSIBILITIES • Comply with all safety policies, practices and procedures. Report all unsafe activities to supervisor and Human Resources., • Assist in the accomplishment of Company goals., • Helps other employee to accomplish Company goals., • Performs other duties as may be assigned by department supervisor. Tarkett Sports companies are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability status, protected veteran status, or any other characteristic protected by law. What We Offer * A commitment that Safety is #1 * Competitive benefits, pay, and retirement plan options! * Career growth, stability, and flexible work arrangements. Responsible Manufacturing - Protecting Our Planet for the Future * We utilize renewable energy and a closed loop recycled water process. * We are committed to reducing greenhouse emissions and water consumption. * We are the only flooring company recognized by the Asthma and Allergy foundation. Who we are: With a history of 140 years, Tarkett is a worldwide leader in innovative flooring and sport surface solutions with 12,000 employees and 34 industrial sites. Offering a wide range of products including vinyl, linoleum, rubber, carpet, wood, laminate, artificial turf, and athletic tracks. The Group serves customers in more than 100 countries across the globe. Committed to change the game with circular economy and to reducing its carbon footprint, the Group has implemented an eco-innovation strategy based on Cradle to Cradle principles, fully aligned with its Tarkett Human-Conscious Design approach. Tarkett is listed on Euronext (Compartment B, ISIN FR0004188670, ticker: TKTT). Tarkett is an equal opportunity employer. We value diversity in backgrounds and in experiences and promote an inclusive workplace where all employees can perform at their best.

Job Description Sign-on bonus eligible position and referral bonuses after you are hired on! Position Summary Be a part of the "Modern Way" and join the team of Commercial Drivers that serve our Western NY customers. Be respected, Be Valued, be Modern! Modern will be celebrating our 60th year in 2024, we are a local family-owned company born and raised in Western NY! We are looking for qualified drivers that will create the "Modern Experience" for our customers and represent the Modern Brand. If you are looking for career growth within a recession-resistant industry, come be an essential driver for Modern Disposal! Essential Responsibilities • Perform complete pre- and post-operation inspection of the vehicle in accordance with Company policy to ensure tire pressure, fluid levels, safety equipment, gauges, and controls are in proper working order. Report any safety issues on standard reports., • Safely operate his or her heavy truck along his or her designated route and to the disposal site; read route sheet, follow map and service each customer as identified on the route sheet or as assigned by the dispatcher and/or supervisor., • Operate manual and/or automatic controls in accordance with Company safety policies and procedures to lift and load refuse, operate compactor and dispose of collected material at the designated facility., • Courteously interact with all customers, dispatchers and others on a daily basis to ensure all customer routes are serviced in a timely and professional manner., • Identify unsatisfactory waste containers and tag containers in accordance with applicable departmental procedures., • Continuously monitor the condition of the vehicle to ensure it is operationally ready at all times to minimize down time; clean waste from the packer blade and truck body (where appropriate) on each disposal trip., • Follow all required safety policies and procedures., • Perform other job-related duties as assigned. The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company. Education and Experience • Clean Class A or B Commercial Driver's license and DOT physical card, • Two years of prior driving commercial trucks preferred., • Able to read and write legibly, • Able to comply with company policy on controlled substances and alcohol, • Ability to work independently with minimal supervision, • Strong customer services skills to meet and exceed customer expectations; acts in a professional, courteous and cooperative manner toward customers and co-workers; works with a sense of honesty and trustworthiness., • Excellent time management skills to ensure assigned responsibilities are completed in an efficient and safe manner., • Good follow through ability; adheres to work schedule and follows through on challenges as they arise., • Ability to adhere to Company policies and rules set forth; promotes the Company’s safety standards; does not take inappropriate risks., • Maintains a feeling of pride in work; strives to achieve all goals.

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: Buffalo, NY Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Job Description About NovaSource NovaSource Power Services is the service partner for renewables asset owners ready to fuel smart growth. As an O&M-focused company with 20 years of operating experience, NovaSource has the global reach and strategic capabilities to achieve our clients’ renewables goals around the world. To serve our clients, we invest in our people. On hire, we assess each employee’s experience and expertise, then mentor them to grow engaging and satisfying careers. Our turn-key services optimize each step of our clients’ project lifecycles — from commissioning to decommissioning and everything in between. Our approach delivers creates success for our clients, stability for our teams, and enables us to build a world-class culture of excellence. And that’s how we empower a renewable world. Basic Job Functions: The Battery Energy Storage System (BESS) Technician is responsible for the safe and efficient operation, maintenance, and troubleshooting of utility-scale energy storage systems. This role supports system uptime and performance through scheduled maintenance, real-time fault response, and root-cause diagnostics of electrical and control systems. Working closely with site operations, OEMs, and remote monitoring teams, the technician ensures reliable system performance across components such as inverters, battery modules, fire suppression, HVAC, and SCADA. This is a field-based, hands-on role ideal for those with strong technical skills, a safety-first mindset, and an interest in contributing to the clean energy transition. Experience: • 1 year of experience in a related position. Education: • High School Diploma or equivalent required., • College or technical degree preferred., • Electrical certifications, state, journeyman, etc. a plus., • Equivalent training in military, utility, or power industry a plus. Physical Requirements: • Bending, kneeling, twisting, the ability to lift up to 70 pounds, the ability to climb ladders, and wear PPE for extended periods of time. Ability to work in high and low temperatures, sun exposure, and navigate on uneven ground on foot., • Ability to differentiate between different colors to manage color-coded wiring., • Good hand-eye coordination. Required Skills/Competencies: • Understanding of electrical safety and arc flash standards., • Ability to follow operating, switching, maintenance, safety and environmental procedures., • Must have a safety background with experience in Lockout Tag Out and Job Hazard Analysis., • Knowledge of industrial or power facility operation and maintenance., • Knowledge of local and national electrical codes., • Basic understanding of Electrical schematics and prints., • Understanding of electrical principles., • With oversight, able to retrieve relay files and documentation., • Familiar with CMMS systems for maintenance tracking., • Proven computer skills in a Windows environment (Microsoft Office Products) is required., • Must demonstrate the ability to communicate in English both verbally and written., • Ability to manage multiple tasks and projects., • Self-directed and accountable, able to think critically about processes and issues., • Valid Driver’s License., • Perform to quarterly key performance indicators, such as actual versus expected energy generation, on-time planned maintenance, and support overall plant and equipment efficiency., • Ensure a safe work environment by strict adherence to company protocols., • Responsible for personal safety, quality and schedule adherence., • Learn, understand, and comply with Job Hazard Analysis, Pre-Job Brief and Lock-Out-Tag-Out procedures., • With supervision be responsible for a variety of PM work including measuring, reading, testing and performing maintenance procedures on all site components., • Communicate effectively and professionally with internal and external stakeholders., • Ensure CMMS work orders are complete in their entirety., • Prepare documents necessary for procurement and utilization of materials and vendor services., • Ensure all documentation and required reports are reviewed, complete, submitted and filed., • Attend, participate in and pass all assigned training in safety, environmental and other areas as assigned., • Maintain work area and site housecleaning to 5S standards., • Inspect and clean PV equipment at assigned location., • Verify SCADA site configuration., • Adhere to Company vehicle maintenance standards and safety standards., • Will report to most senior site manager or supervisor depending on site organizational structure., • Travel may be required depending on the needs of the Company. Office Physical Requirements: All positions in our office require interaction with people and technology while either standing or sitting. In order to best service our customers, internal and external, all associates must be able to communicate face-to-face and on the phone with or without reasonable accommodation. NovaSource is committed to compliance with its obligations under all applicable state and federal laws prohibiting employment discrimination. In keeping with this commitment, it attempts to reasonably accommodate applicants and employees in accordance with the requirements of the disability discrimination laws. It also invites individuals with disabilities to participate in a good faith, interactive process to identify reasonable accommodations that can be made without imposing an undue hardship. Potential candidates will meet the education and experience requirements provided on the above job description and excel in completing the listed responsibilities for this role. US: Diversity Statement – Equal Employment Opportunity It is NovaSource’s policy to provide equal employment opportunity to all applicants and employees. NovaSource disapproves of, and will not tolerate, unlawful discrimination against any applicant or employee because of race, color, national origin or ancestry, gender (including pregnancy, childbirth, or related medical conditions), gender identity, age, religion, disability, family care status, veteran status, marital status, sexual orientation, or any other basis protected by local, state or federal laws.

Job Description Summary: The Maintenance Technician is responsible for maintaining and repairing the physical condition of apartment buildings, grounds, and individual units within an affordable housing complex. They also play a key role in preparing units for new residents and ensuring compliance with various regulatory inspections. Essential Job Functions: • Address tenant maintenance requests promptly and efficiently, providing excellent customer service., • Conduct routine inspections of properties to identify maintenance needs and safety hazards, • Maintain the exterior of the properties, including landscaping, snow removal, and general upkeep., • Assist with preparing units for new tenants, including cleaning and minor repairs., • Clean all common areas and pick up grounds on entire property to maintain proper cleanliness and curb appeal, • Collaborate with property management to ensure compliance with safety regulations and standards., • Routinely inspect the property to monitor vacant apartments, exterior ground, lighting, and building conditions, • Maintain inventory of supplies and tools, placing orders as needed., • Document all maintenance activities and repairs in maintenance log., • Complete monthly preventative maintenance according to policy and regulation., • Perform general maintenance and/or repairs to building systems and apartments, • Perform other duties as assigned by supervisor Knowledge, Skills, and Abilities: • Must have excellent communication, interpersonal, customer service, organizational and time management skills., • Must be able to communicate in English with residents, emergency providers and outside contractors., • Must have a mechanical aptitude; skillful use of equipment and tools and have physical and manual dexterity skills., • Required use of a cell phone while on call., • Must be able to manage a flexible schedule including overtime and be on-call as assigned., • The ability to be on-call for evening and weekend emergencies. Education and Experience: • High School Diploma or equivalent required, • Prior experience related to carpentry, plumbing, electrical, appliance, HVAC, and building systems required, • 2+ years multifamily or construction site management preferred All experience and education requirements, except when required by federal, state, or local laws or requirements, may be waived at the discretion of management with the approval of the Chief Executive Officer, in collaboration with Human Resources. Physical Requirements/Working Conditions: • Must be able to lift, move and transport up to 50lbs without the assistance of hand truck, dolly, or other mechanical lifting devices., • Must be able to walk, bend, stoop, climb stairs, access and work in confined spaces as well as at heights in excess of 20 feet and have the mobility required to use ladders., • Valid drivers license and reliable transportation., • Standard background check and drug screening required. Corporate Qualifications/Expectations: • Adhere to all CDS Housing policies and procedures., • Adhere to the Agency Mission, Vision, Shared Values, and Customer Service Standards., • Attend mandatory education and training modules as scheduled; obtain and maintain all required certifications/training by State regulations and CDS policy, • Act as a professional representative of CDS Life Transitions, Inc. in regard to appearance, behavior, temperament, communication, language, and dress. The statements herein are intended to describe the general nature and level of work being performed but are not to be seen as a complete list of responsibilities, duties, skills, required of personnel so classified. Also, they do not establish a contract for employment and are subject to change at the direction of the employer. CDS Life Transitions is committed to equal employment opportunity. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, sex, disability, protected veteran status, or any other basis protected by applicable federal, state, or local law. CDS Life Transitions will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. If you are interested in applying for an employment opportunity and feel you need a reasonable accommodation pursuant to the ADA, please contact us at 585-341-4600.

Job DescriptionCrisis Counselor II Posted: July 23, 2025 Job Category: Clinical Requisition Number: CRISI001288 Endeavor Health Services is seeking a compassionate and dedicated Crisis Counselor II to join our team in providing immediate and expert support to individuals in distress. As a vital member of our crisis intervention team, you will offer emotional support, crisis resolution, and guidance to those facing urgent mental health challenges. Your role is crucial in helping our clients navigate through their toughest moments, offering a lifeline during times of severe stress and crisis. If you are a skilled listener, a quick thinker, and passionate about making a meaningful difference in the lives of others, we invite you to apply. The successful candidate will be responsible for utilizing ongoing supervision to assist and grow in their position as part of the Crisis Stabilization Center (EAST Haven) Team. The counselor functions as a member of the team providing direct service to people at the Center in need of immediate intervention and assisting with emerging situational circumstances. Duties and Responsibilities • Completes rapid assessment of people to triage for crisis service needs. Directs people to appropriate staff member to begin crisis visit., • Conduct person-centered interviews to assess individual needs of each person presenting for services., • Conduct pre-admissions screenings to determine appropriate level of care for the individual based on information gathered and knowledge of agency/community resources., • Gather information for completing appropriate strength-based treatment planning, involving both the individual and their treatment team., • Utilize selected evidence-based practices and/or screening tools as required by program regulations and guidelines. Demonstrates a clear understanding of the results of each screening tool. Assessments/Screens include but are not limited to: PHQ-9; GAD-7; CSSR-S; BH Risk Formulation; AUDIT-C; COWS, CIWA, utilize breathalyzer machine., • Conduct risk assessment/suicide screenings on each person presenting to the program; full CSSR-S at initial presentation, shorter versions thereafter., • Utilize supervision from the Program Supervisor and/or Program Director on a weekly basis and follow directives given by a supervisor., • Complete all documentation in the EHR in a timely and accurate manner., • Follow agency protocol for internal referrals., • Utilize knowledge of community resources to review linkage plans and referrals to external resources., • Participate in warm hand-offs for people referred through the Behavioral Health Team, Clubhouse, FACT, SOS, clinical services, PROS, TCM, PSR, or other internal programs., • Conducts whole person health screenings at selected community organizations., • Develops and facilitates groups within the clubhouse setting., • Refer people, when appropriate, to a higher level of care including ECMC CPEP, detoxification services, and/or respite services under the direction of a senior staff member including Crisis Counselor II, Program Supervisor, or Director., • Review all follow-up calls with clients and referral sources according to agency schedule., • Maintain cultural sensitivity and competence with respect to agency clients and their families, as well as other employees and referral sources. Willing and capable of working with people of different cultural backgrounds. Willing to learn, articulate, and clarify their personal values, stereotypes, and biases about their own background and potential impacts related to relationship in working with individuals from different backgrounds. Maintain cultural sensitivity and competence with respect to agency clients and their families, as well as other employees and referral sources., • Responsible for ensuring compliance with all agency policies, procedures, and governmental regulations including, but not limited to, all HIPAA policies. Assists individuals and/or families in identifying barriers that prevent them from accessing services and works with the agency team to help develop alternatives to barriers., • Support and assist people in navigating and linking with services. Implement activities to involve people to actively engage in the recovery process., • Pursues continuing & community education to develop skills necessary to effectively treat high-risk populations., • May explain diagnoses and symptoms to people and their support systems., • Utilize selected evidence-based practices and/or screening tools as required by program regulations and guidelines. Demonstrates a clear understanding of the results of each screening tool . Assessments/Screens include but are not limited to: PHQ-9; GAD-7; CSSR-S; BH Risk Formulation; AUDIT-C; COWS, CIWA, utilize breathalyzer machine., • Reviews referrals for hospitalization for appropriate use of these resources., • Linkage and referrals for external resources., • All follow-up calls with clients and referral sources according to agency schedule., • Meet with individuals in a designated program area within an agency site or in the community to help provide support, advocacy, and conduct behavioral health assessments., • May conduct community outreach activities to promote the work of their assigned program area. May represent EHS on local and regional committees., • Advise supervisor regarding clients for discharge. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Must have the ability to take personal responsibility as well as work with a team in a fluid environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience • Must possess a Master’s Degree from a recognized college or university in counseling or social work and be eligible for licensure within 18 months of hire (LMSW, LCSW, LMHC, LMFT, CASAC 2, etc.), • One year experience of direct service, post-graduate experience preferred but not required. Endeavor Health Services is an equal opportunity employer committed to championing the principles of diversity, equity, inclusion, and belonging. We welcome prospective employees from diverse cultures and backgrounds, for all positions, who will uphold our values and contribute to our mission. We aim to have a leadership and workforce that is reflective of the communities with which we work in partnership. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor. PIc269ade02d8a-25405-38153330

Allied Universal®, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. We offer comprehensive benefits for most full-time positions, including medical, dental, and vision coverage, life insurance, a retirement plan, employee assistance programs, company discounts, perks, and more. Allied Universal is looking for a Department of Defense Cleared site Supervisor for Plant in Cheektowaga NY Starting pay $24.00 an hour with DailyPay available Monday - Friday 7:00 am - 3:00 pm MUST have Active Department of Defense Government Clearance Valid NYS drivers license and 1+ year of security experience Allied Universal® is hiring a Site Supervisor. The general purpose and function of the Site Supervisor encompasses the professional operation, administration, profitability, and quality assurance of uniformed services for a client's site. RESPONSIBILITIES: • Oversee that all aspects of the security function on-site are performed in a diligent manner (staffing, scheduling, and on-site training all Allied Universal®. personnel assigned to his/her site), • Ensure that contract-required training and screening elements for security personnel have been met, • Maintain overtime to a minimal or preset requirement designated by AUS, • Ensure quality of service and contract compliance by regularly inspecting security personnel and their job performance when assigned to his/her shift, • Perform other operations and related functions (e.g., payroll, review and maintain incident reports, assist in preparation of security surveys and post orders), • Make recommendations for positive and negative personnel actions for those under his/her direct supervision., • Respond to client requests, • Make emergency notifications as necessary pursuant to site Post Orders, • Provide direction and instruction to subordinates in regard to the performance of their duties, • Disciplinary action/commendation decisions pertaining to security personnel, • Make productivity and cost reduction recommendations to management, • Make recommendations for physical security surveys and post orders, • Must possess a high school diploma or equivalent, • Must be able to pass any State-required training or other qualifications for licensing, • Must be able to pass a state licensing test if driving a company-owned or client-provided vehicle, • Must possess one or more of the following:, • Service in the active-duty military, military reserves, or National Guard, • Service in Auxiliary Police or Police Cadets, • Minimum of one year verifiable and successful supervisory experience in security-related industry, • Associate's degree or higher in any discipline, • Be at least 18 years of age, or higher if required by the state (21 years, if armed), • Be able to operate radio or telephone equipment and/or console monitors, • Demonstrated ability to interact cordially and communicate with the public, • Effective oral and written communication, • Problem solving, • Active listening, • Assess and evaluate situations effectively; identify critical issues quickly and accurately, • Compile, sort, and interpret data, • Research, investigate, compile information, • Mediate conflict with tact, diplomacy, • Write informatively, clearly, and accurately, • Teamwork, • Health insurance and 401k plans for full-time positions, • Schedules that fit with your personal life goals, • Ongoing paid training programs and career growth opportunities If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . 2025-1419433

Job Description Fence Installer / Fence Erector Duties: • Discuss fence procedures and follow directions from project foreman, • Establish location for fence in safe locations after locates are complete, • Follow plans, drawings or directions to measure and lay out fence lines, post placement etc. to specifications, • Load, unload, identify and distribute building materials to appropriate locations, • Operate a variety of small equipment and tools in order to preform job, • Dig and tamp posts using hand tools, power tools and power-driven augers, • Set or pound metal or wood posts in varied ground conditions, • Mix and pour concrete at base of posts, or tamp soil to set posts, • Make rails for fences by sawing lumber or cutting metal to required lengths, • Stretch a variety of wire and attach to posts using hammers, pliers and other tools, • Assemble and install gates in proper position, • Weld metal parts for gates, corrals, H-braces and other possible fence elements, • Other duties as required Ability Requirements: • Performing physical activities that require use of arms legs and moving your whole body such as climbing, lifting, balancing , walking, stooping and handling materials, • Lift arms above shoulders for moving and lifting light to heavy objects, • Must have good hand-eye coordination and quick reaction time., • Adequate sight and hearing to perform duties safely, • Must be able to sit, stand or walk for extended periods of time, • Work in a variety of weather conditions with exposure to the elements, • Learn job related functions through oral communication and observation with on-the-job training, • Must be able to wear hard hat, safety glasses, gloves and other Personal Protective equipment while being alert and looking out for personal safety and safety of others, • Maintain a positive attitude, work cooperatively with others, arrive at determined site location on time and have regular communication with supervisor about scheduling Preferred Skills: • Prior construction experience, • Welding experience, • CDL and/or hauling experience, • Equipment operating experience Compensation: • Base Rate: $33.66/hour, • Fringe Benefits: $25.30/hour Fringe benefits may be provided in the form of bona fide benefits (such as health insurance, retirement contributions, and training programs) or paid as additional cash compensation. Fringe benefits may be provided in the form of bona fide benefits (such as health insurance, retirement contributions, and training programs) or paid as additional cash compensation. Performance Expectations: • Cooperation with supervisor and co-workers on job site, i.e., mutual respect and teamwork, • Absences and Tardiness: Be on time or early prepared for work. If you will be more than five minutes late call supervisor. Call supervisor if you are unable to attend work prior to scheduled meeting time and arrange scheduled time off as early as possible or at least one week in advance., • Work Attire: Wear appropriate attire, i.e., work boots, gloves, pants and other job specific personal protective equipment, eye protection, hard hat, safety vest etc. Be prepared for outdoor elements. High Country Fence is based in Rye, Colo. The company specializes in a wide variety of fence products for commercial, government, agricultural and residential customers in Colorado and beyond.

Job Description Job Title: Warehouse Associate – Shipping Department: Warehouse Reports To: Warehouse Manager Job Status: Full-time FLSA Classification: Non-exempt Hours: 6 a.m. – 4:30 p.m. Monday – Thursday Tectran Manufacturing Inc. is an industry-leading manufacturer and marketer of air, hydraulic and electrical systems for the transportation industry. The primary market focus includes the heavy-duty tractor trailer and bus industries. Our commitment to quality and durability assures us a leading-edge in product designs and superior performance for demanding market applications. We hold several patents and make it a practice to listen closely to the needs of the customer. Job Summary We are looking for a hard-working and self-motivated individual to support the Warehouse Department in Shipping. The person in this role is responsible for shipping customer orders per sales order requirements. The candidate will ensure accuracy, quality, and efficiency for “best in class” customer service. The ideal candidate is responsible, has excellent attention to detail, and has a positive attitude. Responsibilities: • Assembles containers, crates, and skids, packing goods to be shipped including attachments and documentation, when necessary, • Determines method of shipments, prepare bills of lading, and maintain internal shipping documentation, • Ensures security and good functioning of equipment, • Restock shipping supplies, and advise when supplies are needed, • Adheres to all warehousing, material handling, and shipping compliance requirements, • Ensures safety and efficient productivity by maintaining cleanliness and organization of shipping and staging areas, • Maintains and supports federal, state, local, and company standards of health, safety, hygiene, and security, • Manages stock control and reconciles data using the company’s ERP system, Epicor, • Performs additional tasks that may be assigned by management Education & Experience: • High school Diploma, GED, or equivalent (preferred), • At least six (6) months of proven work experience in a warehouse environment, • Strong knowledge of warehousing or distribution Required Skills & Abilities: • Strong computer literacy skills, • Good communication skills, • Possesses strong attention to detail, • Good math and analytical skills, • Works well on a team or independently, • Able to prioritize day-to-day tasks Safety Responsibilities: • Employee will be required to wear the provided PPE per the role requirements, • Follow site safety and any department specific protocols, • Report safety hazards or potential safety hazards to reporting Supervisor, • Attend company safety meetings Physical Requirements: • Must be able to occasionally lift up to 50 lbs on a regular basis, • Must be able to walk the warehouse floor on a regular basis without difficulty, • Ability to stand for an extended period of time without difficulty Perks: • PTO and 10 Paid Holidays (annually), • Health, Dental, Vision, Life and AD&D, and various voluntary insurance coverages, • 401(k) program with a company match, • Wellness program, • $500 referral bonus TECTRAN is an equal opportunity employer. We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors.

Job Description Lead Warehouse Associate- Full Time Buffalo, NY DiVal Safety Equipment, a leader in the industrial safety, Fire, and EMS distribution business, is looking for a full time General Warehouse associate with a “whatever it takes” attitude. The main responsibilities of this position are to pick/pack orders and deliver to our customers in an accurate and efficient manner with safety being a priority. Candidates must possess: • Positive energy and enjoy assisting and serving others., • Strong productive work ethic and sense of urgency., • Ability to manage multiple tasks., • Focus on safety at all times – safety training and direction must be adhered to at all times, reporting any existing or potential safety concerns to management., • Assisting locations supervisor with inventory duties, including, cycle counts, review order issues, and investigations., • Including picking, packing, shipping orders, receiving inventory, and putting stock away., • Supervise put away, and ship confirm process., • Assist in implementing vendor error processes., • Teach and train all employees on company processes and procedures., • Responsible for handling issues that may arise in shipping, receiving, inventory, and in vending., • Supervise the ship confirm process., • Report daily metrics to the metrics boards., • Ensuring all orders on the must shipboard have been addressed by the end of the day., • Assist customers in the store with pick-ups, order entry and answering phones., • Complete cleaning and maintenance duties as directed., • Enter vending orders needed for inventory to complete machine set up., • Complete machine set up as needed for customers., • Perform the end of day order close out., • Report any existing or potential safety concerns to management., • Reporting directly to the location Supervisor and other management team members, • Preforming on site replenishment of inventory in vending machines at local customers., • Perform additional warehouse duties that may arise and assigned by management. Skills and Requirements: • Ability to pass a NON-D.O.T. physical with drug screen., • Strong organizational and time management skills., • Detail oriented and self-motivated., • Ability to lift up to 50 lbs. on a repetitive basis., • High school diploma / GED equivalent. Benefits: • Medical benefits., • Dental & vision benefits., • Other voluntary benefits (STD, LTD, Accident, Critical illness, Life insurance)., • Company provided life insurance policy., • 401K. Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location.

Job Description Job Title: Order Picker & Forklift Operator Department: Warehouse Reports To: Warehouse Manager Job Status: Full-time FLSA Classification: Non-Exempt Hours: 6 a.m. – 4:30 p.m. Monday – Thursday Tectran Manufacturing Inc. is an industry-leading manufacturer and marketer of air, hydraulic and electrical systems for the transportation industry. The primary market focus includes the heavy-duty tractor trailer and bus industries. Our commitment to quality and durability assures us a leading-edge in product designs and superior performance for demanding market applications. We hold several patents and make it a practice to listen closely to the needs of the customer. Job Summary We are currently seeking a candidate to fill an Order Picker & Shipper position at our Cheektowaga, New York location. The candidate in this position will pick and pack customer orders. This individual will ensure accuracy, quality, and efficiency to meet “best in class” customer satisfaction. The ideal candidate is responsible, has excellent attention to detail, and has a positive attitude. Responsibilities: • References shipping portal to select products from finished goods bins, check products for damage or defects, notes product shortages, and scans parts into company system, • Assembles containers, crates, and skids, packing goods to be shipped including attachments and documentation, when necessary, • Ensures security and good functioning of equipment, • Restocks shipping supplies, and advises when supplies are needed, • Puts away large items received and pulling stock down from upper racking, • Organizes stock bins and replenish shelves to ensure accuracy and efficiency for order pickers, • Maintains fork trucks, pallet jacks, or industrial trucks, including conducting and recording daily inspection, • Adheres to all warehousing, material handling, and shipping compliance requirements, • Maintains and supports federal, state, local, and company standards of health, safety, hygiene, and security Education & Experience: • High school diploma, GED, or equivalent (preferred), • Proven experience with operating a forklift, • At least six (6) months of proven work experience in a warehouse environment, • Strong knowledge of warehousing or distribution, • Familiar with scanning equipment (a plus) Required Skills & Abilities: • Possesses a current forklift certification (preferred), • Strong computer literacy skills, • Familiar with navigating the internet, • Good communication skills, • Possesses strong attention to detail, • Possesses good math and analytical skills, • Works well on a team or independently, • Has ability to prioritize day-to-day tasks, • Has strong problem-solving skills Safety Responsibilities: • Employee will be required to wear the provided PPE per the role requirements, • Follow site safety and any department specific protocols, • Report safety hazards or potential safety hazards to reporting Supervisor, • Attend company safety meetings Physical Requirements: • Frequent standing, bending, reaching, lifting, and carrying up to 50 pounds, • Must be able to walk the warehouse floor on a regular basis without difficulty, • Occasional kneeling and squatting, climbing ladders, pulling, and repetitive motions Perks: • PTO and 10 Paid Holidays (annually), • Health, Dental, Vision, Life and AD&D, and various voluntary insurance coverages, • 401(k) program with a company match, • Wellness program, • $500 referral bonus TECTRAN is an equal opportunity employer. We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors.

Masis Professional Group is recruiting for a Preconstruction Manager on behalf of our client located in Buffalo, NY. This is a direct hire opportunity offering a competitive hourly salary and benefits package. The ideal individual will have commercial estimating experience and costing experience. This position works with the estimators and under the supervision of a Project Manager to obtain negotiated agreements with sub-contractors and vendors. Responsibilities and Duties of the Preconstruction Manager: Preconstruction: • Assist the Project Manager (PM) in soliciting project bids, including developing scopes of work, contacting contractors for pricing, summarizing and reviewing bids, and comparing itemized scopes to project estimates., • Support the PM in preparing bid summaries, drafting subcontracts, and performing other construction administration tasks., • Review construction plans to identify potential errors and omissions., • Contribute to the development of logistical sequencing plans and maintenance and traffic management plans., • Demonstrate an understanding of construction schedules and critical path methodology., • Willingness to visit project sites and perform daily field tasks as needed. Estimating: • Accurately prepare a detailed cost estimate of all aspects of proposed projects including but not limited to quantity takeoff, detailed cost estimate, line item, and subcontractor summary by division., • Obtain, distribute, and manage plans or specifications as directed by the supervisor for proposed projects., • Review the summarized budget with the supervisor., • Maintain all unit prices and keep current in estimating programs and templates., • Adjust unit prices in the system as the market adjusts the prices., • Verify existing conditions of vacancies and incorporate found conditions into budget and estimates. Qualifications of the Preconstruction Manager: • A two-year construction degree, Construction Related Degree, or equivalent combinations of technical training and/or related experience is preferred., • Site Superintendents wanting to become a Project Manager are welcome to apply., • 4+ years of commercial estimating experience required, preferably with a general contractor or developer., • Analytical and problem-solving mentality, • Team player, self-motivated, gets along well with employees at all levels in the organization., • Capability to plan, prioritize and multitask with meticulous attention to detail within time constraints., • Strong and effective written and verbal skills., • Possess a solid understanding of construction site safety and the ability to identify and address safety concerns., • Strong Computer skills, Excel, Bluebeam, QTY take off programs., • Self-motivated, Willing to learn, work as a team. Please submit your resume if you are interested in being considered for this position.

Job Description 11p-7a MUST WORK WEEKENDS AND HOLIDAYS Job Summary A Housekeeper/Room Attendant is primarily responsible for maintaining clean and attractive guest rooms, hallways, and public areas in the hotel, servicing guest rooms daily in accordance with hotel procedures, stocking cart with room supplies, and replacing bed linens and replenishing guest room supplies while following company standards and safety/security procedures. Education & Experience • High School diploma or equivalent and/or experience in a hotel or a related field preferred., • This position requires strong attention to detail, ability to communicate effectively with guests and team members verbally or in written form, • Must be able to convey information and ideas clearly., • Must be able to evaluate and select among alternative courses of action quickly and accurately., • Must work well in stressful, high-pressure situations., • Must be effective at listening to, understanding, and clarifying the concerns and issues raised by coworkers and guests. Job Duties & Functions • Approach all encounters with guests and employees in a friendly, service-oriented manner., • Maintain regular attendance in compliance with Avantic Lodging Enterprises standards as required by scheduling, which will vary according to the needs of the hotel., • Maintain high standards of personal appearance and grooming, which include wearing the proper uniform and name tag when working (per brand standards)., • Comply at all times with Avantic Lodging Enterprises standards and regulations to encourage safe and efficient hotel operations., • Thoroughly clean and restock the required number of guest rooms per shift., • Complete all pre-cleaning duties, including but not limited to, guest supplies, cleaning supplies, and linen for housekeeping cart set-up., • Remove all trash and dirty linen from guest rooms., • Keep all hallways, public areas and closets clean, neat and vacuumed., • Prepare housekeeping cleaning cart for next day's use., • Clean room with the door closed always unless requested to do otherwise by the guest., • Report all missing items from room (i.e., irons/boards, hairdryers, etc.) to Housekeeping Supervisor/Manager., • Report any maintenance repairs immediately to Housekeeping Supervisor/Manager., • Handle items for "Lost and Found" according to the standards., • Follow all procedures as outlined by the Housekeeping Manager. The following outlines the work environment employees will encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Frequency Grid N = Not Anticipated: 0% O = Occasionally: 1-33% (per shift) F = Frequently: 34-66% (per shift) C = Constantly: 67-100% (per shift) Work Environment of Job Associate is subject to inside environmental conditions: Protection from weather conditions but not necessarily from temperature changes. Frequency: N Associate is subject to outside environmental conditions: No effective protection from weather. Frequency: N Associate is subject to extreme heat or cold (temperatures below 32 degrees or above 100 degrees) for periods of more than one hour. Frequency: N Associate is subject to noise: There is sufficient noise to cause the employee to shout in order to be heard above ambient noise level. Frequency: N Associate is subject to vibration: Exposure to oscillating movements of the extremities or whole body. Frequency : N Associate is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. Frequency: N Associate is subject to atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin: Fumes, odors, dusts, mists, gasses, or poor ventilation. Frequency: N Associate is subject to oils: There is air and/or skin exposure to oils and other cutting fluids. Frequency: N Associate is required to function in narrow aisles or passageways. Frequency: N Associate is exposed to infectious diseases. Frequency: N None: Associate is not substantially exposed to adverse environmental conditions (as typical office or administrative work). Frequency: N Physical Requirements of Job Climbing: Ascending or descending ladders, stairs, scaffolding, ramps, poles, and the like, using feet and legs and/or hands and arms. Frequency: F Balancing: Maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces. Frequency: O Stooping: Bending body downward and forward by bending spine at waist. Requires full use of the lower extremities and back muscles. Frequency: F Kneeling: Bending legs at knee to come to rest on one or both knees. Frequency: F Crouching: Bending the body downward and forward by bending leg(s) and spine. Frequency: F Crawling: Moving about on hands and knees or hands and feet. Frequency: F Reaching: Extending hand(s) and arm(s) in any direction, particularly for sustained periods of time (typing/using a mouse). Frequency: F Standing: Remaining upright on the feet, particularly for sustained periods of time. Frequency: F Walking: Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another. Frequency: C Pushing: Using upper extremities to press against something with steady force in order to thrust forward, downward or outward. Frequency: F Pulling: Using upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion. Frequency: F Finger Dexterity/Grasping: Picking, pinching, typing or otherwise working, primarily with fingers rather than with whole hand or arm as in handling. Applying pressure to an object with the fingers and palm. Frequency: F Feeling: Perceiving attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips. Frequency: F Talking: Expressing or exchanging ideas by means of the spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers or guests accurately, loudly, or quickly. Frequency: O Hearing: Perceiving the nature of sounds at normal speaking levels with or without correction, and having the ability to receive information through oral communication. Frequency: O Repetitive Motions: Making substantial movements (motions) of the wrists, hands, and/or fingers. Frequency: C Vision: Employee is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; determine accuracy, neatness, and thoroughness of the work assigned; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurements devices; and/or assembly or fabrication of parts at distances close to the eyes. Frequency: F Lifting Lifting: Raising objects from a lower to a higher position or moving objects horizontally from position to positions. Frequency: O Amount: 20-50LBS General Notes This job description is not intended to be all-inclusive, additional details will be specified by the supervisor. The associate will also perform other reasonable business duties assigned by the supervisor. Management reserves the right to change this job description, job responsibilities, duties, and working hours as needs prevail. If requested in accordance with applicable law, the Company provides reasonable accommodation to known physical or mental limitations of an otherwise qualified associate with a disability to allow him/her to perform essential functions of the job unless the accommodation would impose an undue hardship on the Company. Avantic Lodging Enterprises is an at-will employer. This job description is a guideline and does not constitute a written or implied employment contract. Job Posted by ApplicantPro

Job Description About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: This role supports areas of field Service operation within Sungrow USA related to commissioning, warranty, and Operations and Maintenance (O&M) of the expanding installed sites in the region. Reporting to the regional field service supervisor, this position is responsible for troubleshooting, repairing, maintaining, and commissioning support of PV inverters and ancillary equipment/ systems, usually at the customer’s site or at a staging yard/warehouse. This position will comply with the Safety Mandate, “ZERO HARM,” to ensure safe and efficient work and operation of the facility for all personnel and equipment. Ensures that personnel and safety issues are given priority to maintaining a safe and efficient working environment. Implements and enforces safety management policy and procedures regarding the facility: safety information, hazard analysis, safe operations/Maintenance Training, subcontractor compliance, plant integrity, work permits, emergency planning, and response. Duties and Responsibilities: • Perform a variety of technical assignments involving the installation, operation, testing, and maintenance of string and central solar inverter and/or BESS Systems, PCS, batteries, and ancillary equipment., • Perform general troubleshooting and diagnosis under Sungrow’s maintenance and repair guidelines., • As needed, support and perform pre-commissioning (with and without grid emulator) and commissioning of solar inverters and BESS systems within schedule and work plans, • Additionally, for those on O&M capacity, perform Preventive Maintenance and other Long Term Service Agreement (LTSA) activities per the contract, • Investigate solar plant issues such as DC array grid faults, inverter design issues, and utility grid transients. For BESS positions, these investigations may also involve SOC checks and module /component-level troubleshooting, replacement of electrical/electronic parts, SW version updates, etc., • Provide feedback to the engineering and project team on possible mechanical and electrical design improvements., • Lead upgrade/rework projects (software and hardware) in the field and interact with customers to explain the project's technical scope and manage work schedule and commitments., • Work with customer SCADA engineers to set up systems communication and parameters involving Sungrow’s controllers and F&G systems as needed., • Accurately describes troubleshooting sequences and procedures which they have observed, • Identifies and documents basic mechanical and electrical issues and problems, • Performs basic corrective maintenance, • Create/modify Field Service procedures for safety troubleshooting and maintenance if required., • When using contractors on sites, act as the Lead to ensure the contractors submit daily activity reports and JSA reports and work follows Sungrow standards and expectations., • Prepare and submit own Daily Activity Reports and Daily JSA Reports., • Work independently in the field and with Design Engineers to resolve high-level technical issues, support the investigation of the root cause for technology applications for complex projects, • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar plant operations., • Verify and comply with engineering documentation standards and test procedures., • Completes documentation in a timely and organized fashion, • Follow level-appropriate standard operating procedures., • Own creation and submission of all field paperwork and documentation for full compliance with site documentation and project requirement, • Associate’s Degree in an Engineering or Computer Science Discipline from an accredited university or college, • Renewable industry experience is desired, • Power Electronics experience is desired, • OSHA 10 certificate within 12 months of date of hire, • Strong demonstration of workplace safety practices, • Understands and follows a Safety Plan, • Comprehend Job Hazard Analysis and conduct level-appropriate Job Hazard Analysis, • Designated as Authorized Person for LOTO, • Compliant with environmental safety requirements, • Proficient in the use of Microsoft Office, including Word, Excel, Outlook, PowerPoint, • Motivated self-starter with complex problem-solving abilities., • A ‘completer-finisher’ taking accountability for ideas from inception to delivery in an environment that requires robust metrics to confirm the success., • Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of partners, senior managers, and subject matter experts., • 3 plus years of overall experience in a technical field, • 2 years of experience in solar inverters or BESS, • Must possess the ability to work with test equipment and hand tools as required., • Must be able to closely follow instructions and pre-established procedures/SOP to perform the ductions of the job, • Must be proficient in Microsoft Office Suite (Word, Excel, PowerPoint and Outlook), • OSHA, NFPA70A, Electrical Safety, • 80% Plus Work Location and Status: • Contract-to-Hire, NY area, • Compensation commensurate with experience, • Competitive benefits package and employee programs Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow.

Job DescriptionDescription: The Driver is responsible for delivering food and supplies as determined by the daily menu and meal count to Senior Centers and Nutrition Sites as directed by the Transportation Manager. RESPONSIBILITIES: • Pack, load, and deliver food and supplies for lunch meals according to route instructions;, • Pick-up clipboard, meal count, and checklist. Check the menu and check for special instructions. Start packing milk and supplies;, • After packing is complete, load truck or van and review the checklist to make sure everything is packed;, • Check with Transportation Manager for instructions;, • As the meal is delivered, pick up transport equipment and meal tickets from the previous day;, • At each stop, ensure that everything is off the truck for the meal site. Go over the items that were delivered with the Site Manager;, • Have the Site Manager accepting the food sign the meal ticket and put the time of delivery on the meal ticket. The Site Manager will take the temperature and log the temperatures on the meal ticket;, • Report feedback from the Site Manager to the Transportation Manager upon return to the Commissary;, • Maintain the assigned company vehicle and equipment according to standards;, • Report delays to the Transportation Manager or designee for special instructions;, • After all deliveries are made, fill the vehicle with fuel, and check coolant and oil;, • Clean vehicle inside daily and outside a minimum of once per week. Report any malfunctions to the Transportation Manager;, • Follow all company, client, and traffic policies, rules, and regulations;, • Complete all training provided by the company including the driver's handbook;, • Be to work on time. In case of emergency, report directly to your immediate supervisor in advance of the regular scheduled starting time;, • Maintain workplace professionalism;, • Display a friendly and positive attitude toward the job and other persons; perform job duties willingly and without complaint;, • Never releasing or discussing internal matters of a serious/sensitive nature outside the company;, • Assist with any and all mission work as needed and requested with some or no prior notice including, but not limited to: serving as a truck spotter, helping with Farm Market/Community Garden/Freight Farms/on and off site food distributions, preparation of meals and serving home-delivered meals; and, • Other duties as so assigned or needed.Requirements:, • Must be at least 21 years of age at the time of hire, a minimum of two (2) years driving experience;, • Must hold a valid driver's license with a clean driving record for the past three (3) years;, • Must not have any convictions or citations for driving under the influence of alcohol or drugs;, • Must not have any citations or convictions for fleeing or attempting to elude police or law enforcement, commission of a felony, aggravated assault with a vehicle, vehicular homicide, hit and run or leaving the scene of an accident;, • Ability to properly lift a minimum of 75 pounds with minimal effort following required safety guidelines;, • Ability to work in hot or cold conditions for long periods of time;, • Ability to tolerate sudden and extreme changes in temperature;, • Ability to work with all food types, including but not limited to gluten, dairy, and raw proteins, including pork;, • Ability to complete basic vehicle maintenance; and, • Good customer relations skills; interaction with some Site Managers

Job Description MUST WORK WEEKENDS AND HOLIDAYS 3p-11p & 11p-7a Job Summary Primary responsibilities include: driving guests to designated locations, assisting guests with luggage, maintaining vehicle cleanliness, and concierge duties. Van Drivers must have strong analytical and navigation skills with the ability to coordinate multiple pick-ups and drop-offs on a schedule under continuously changing circumstances. Drive the van according to scheduled van runs and/or as needed for guests, and accommodate guests during their stay in an attentive, courteous and efficient manner. Education & Experience • High School diploma or equivalent required and/or experience in a hotel or a related field preferred., • Must have a valid driver's license for the applicable state., • Minimum of one year driving experience, • Must have an acceptable MVR (Motor Vehicle Driving Record), • Must be able to convey information and ideas clearly., • Must be able to evaluate and select among alternative courses of action quickly and accurately., • Must maintain composure and objectivity under pressure Job Duties & Functions • Approach all encounters with guests and employees in a friendly, service-oriented manner., • Maintain regular attendance in compliance with Avantic Lodging Enterprises standards, as required by scheduling which will vary according to the needs of the hotel., • Maintain high standards of personal appearance and grooming, which include wearing the proper uniform and name tag when working (per brand standards), • Comply at all times with Avantic Lodging Enterprises standards and regulations to encourage safe and efficient hotel operations., • Greet guests' in a pleasant manner., • Load and unload luggage carts., • Load and unload van with luggage., • Escort guests to rooms upon request., • Check/store luggage for arrivals and departures using luggage tags., • Open and close cab doors for arriving and departing guests., • Deliver messages to meeting rooms., • Maintain current listing of local and area attractions, special events, and activities., • Maintain list of local transportation guides, churches, sport arenas, etc., • Provide information, maps, and directions as required., • Ensure lobby reader board is correct., • Maintain cleanliness of motor entrance, front door and lobby area., • Deliver flowers, packages and messages to guest rooms., • Complete room changes., • Maintain cleanliness of van interior and exterior., • Drive van as per scheduled runs., • Answer console to assist guest services agents., • Show guest rooms and suites as needed and emphasize company amenities., • Other duties as required Working Conditions/Environment The following outlines the work environment employees will encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Frequency Grid N = Not Anticipated: 0% O = Occasionally: 1-33% (per shift) F = Frequently: 34-66% (per shift) C = Constantly: 67-100% (per shift) Work Environment of Job Associate is subject to inside environmental conditions: Protection from weather conditions but not necessarily from temperature changes. Frequency: O Associate is subject to outside environmental conditions: No effective protection from weather. Frequency: F Associate is subject to extreme heat or cold (temperatures below 32 degrees or above 100 degrees) for periods of more than one hour. Frequency: N Associate is subject to noise: There is sufficient noise to cause the employee to shout in order to be heard above ambient noise level. Frequency: F Associate is subject to vibration: Exposure to oscillating movements of the extremities or whole body. Frequency: O Associate is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. Frequency: N Associate is subject to atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin: Fumes, odors, dusts, mists, gasses, or poor ventilation. Frequency: N Associate is subject to oils: There is air and/or skin exposure to oils and other cutting fluids. Frequency: N Associate is required to function in narrow aisles or passageways. Frequency : N Associate is exposed to infectious diseases. Frequency: N None: Associate is not substantially exposed to adverse environmental conditions (as typical office or administrative work). Frequency: N Physical Requirements of Job Climbing: Ascending or descending ladders, stairs, scaffolding, ramps, poles, and the like, using feet and legs and/or hands and arms. Frequency: F Balancing: Maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces. Frequency: F Stooping: Bending body downward and forward by bending spine at waist. Requires full use of the lower extremities and back muscles. Frequency: F Kneeling: Bending legs at knee to come to rest on one or both knees. Frequency: F Crouching: Bending the body downward and forward by bending leg(s) and spine. Frequency: O Crawling: Moving about on hands and knees or hands and feet. Frequency: O Reaching: Extending hand(s) and arm(s) in any direction, particularly for sustained periods of time (typing/using a mouse). Frequency: C Standing: Remaining upright on the feet, particularly for sustained periods of time. Frequency: C Walking: Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another. Frequency: C Pushing: Using upper extremities to press against something with steady force in order to thrust forward, downward or outward. Frequency: F Pulling: Using upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion. Frequency: F Finger Dexterity/Grasping: Picking, pinching, typing or otherwise working, primarily with fingers rather than with whole hand or arm as in handling. Applying pressure to an object with the fingers and palm. Frequency: O Feeling: Perceiving attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips. Frequency : C Talking: Expressing or exchanging ideas by means of the spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers or guests accurately, loudly, or quickly. Frequency : C Hearing: Perceiving the nature of sounds at normal speaking levels with or without correction, and having the ability to receive information through oral communication. Frequency:C Repetitive Motions: Making substantial movements (motions) of the wrists, hands, and/or fingers. Frequency: O Vision: Employee is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; determine accuracy, neatness, and thoroughness of the work assigned; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurements devices; and/or assembly or fabrication of parts at distances close to the eyes. Frequency: C Lifting Lifting: Raising objects from a lower to a higher position or moving objects horizontally from position to positions. Frequency : O Amount: 50+ lbs. General Notes This job description is not intended to be all-inclusive, additional details will be specified by the supervisor. The associate will also perform other reasonable business duties as signed by the supervisor. Management reserves the right to change this job description, job responsibilities, duties, and working hours as needs prevail. If requested in accordance with applicable law, the Company provides reasonable accommodation to known physical or mental limitations of an otherwise qualified associate with a disability to allow him/her to perform essential functions of the job unless the accommodation would impose an undue hardship on the Company. Avantic Lodging Enterprises is an at-will employer. This job description is a guideline and does not constitute a written or implied employment contract. Job Posted by ApplicantPro

Job Description Commercial Sales Associate CertaPro Painters of WNY is a leader in the residential and commercial painting industry. We are a professional painting organization specializing in beautifying homes and buildings; interiors, exteriors, commercial, offices, and condominiums. Our success has been built on the foundation of delivering certainty to our customers – certainty of a job well done. We focus on the details of every project and most importantly, we focus on our clients. Overview: Seeking new clients and maintaining our existing clients by delivering them the best solution for their commercial painting needs. We are committed to delivering an extraordinary experience. Responsibilities: • Commercial Sales to Property Managers, Facility Managers and Industrial Customers by initiating, developing and growing commercial painting relationships., • Cold calling and field networking to seek new business, • Development and maintenance of our current business accounts, • Participate in industry events and tradeshows, • Diligent Customer Follow-Up & Follow Through, • On-going commitment to sales goals, • Ensure customers receive a detailed proposal for all requests., • Ensure that our customers’ needs, and their expectations are clearly communicated and accurately documented on their proposal., • Develop a close working relationship with the Marketing Associate, the Production Associate, and the Job Site Supervisor to ensure all expectations set forth on the proposal are met., • Meet with customer, in person, whenever possible to perform estimates and gather information about their needs pertaining to the execution of the project., • Grow revenue from existing accounts and relationships, • Prepare Weekly Analysis of Results in preparation for Goal Setting & Review with Supervisor. Qualifications and Requirements: • Driver’s License with clean driving record, • B2B, commercial sales experience (preferred), • Track-Record as a Top Performer (preferred), • History of accomplishments and promotions, • Working knowledge of interior and exterior paints coatings, carpentry, drywall, EIFS, DRYVIT and other construction (preferred), • Great communication, presentation and interpersonal skills, • Goal oriented, organized and energetic

Masis Professional Group is recruiting for a Preconstruction Manager on behalf of our client located in Buffalo, NY. This is a direct hire opportunity offering a competitive hourly salary and benefits package. The ideal individual will have commercial estimating experience and costing experience. This position works with the estimators and under the supervision of a Project Manager to obtain negotiated agreements with sub-contractors and vendors. Responsibilities and Duties of the Preconstruction Manager: Preconstruction: • Assist the Project Manager (PM) in soliciting project bids, including developing scopes of work, contacting contractors for pricing, summarizing and reviewing bids, and comparing itemized scopes to project estimates., • Support the PM in preparing bid summaries, drafting subcontracts, and performing other construction administration tasks., • Review construction plans to identify potential errors and omissions., • Contribute to the development of logistical sequencing plans and maintenance and traffic management plans., • Demonstrate an understanding of construction schedules and critical path methodology., • Willingness to visit project sites and perform daily field tasks as needed. Estimating: • Accurately prepare a detailed cost estimate of all aspects of proposed projects including but not limited to quantity takeoff, detailed cost estimate, line item, and subcontractor summary by division., • Obtain, distribute, and manage plans or specifications as directed by the supervisor for proposed projects., • Review the summarized budget with the supervisor., • Maintain all unit prices and keep current in estimating programs and templates., • Adjust unit prices in the system as the market adjusts the prices., • Verify existing conditions of vacancies and incorporate found conditions into budget and estimates. Qualifications of the Preconstruction Manager: • A two-year construction degree, Construction Related Degree, or equivalent combinations of technical training and/or related experience is preferred., • Site Superintendents wanting to become a Project Manager are welcome to apply., • 4+ years of commercial estimating experience required, preferably with a general contractor or developer., • Analytical and problem-solving mentality, • Team player, self-motivated, gets along well with employees at all levels in the organization., • Capability to plan, prioritize and multitask with meticulous attention to detail within time constraints., • Strong and effective written and verbal skills., • Possess a solid understanding of construction site safety and the ability to identify and address safety concerns., • Strong Computer skills, Excel, Bluebeam, QTY take off programs., • Self-motivated, Willing to learn, work as a team. Please submit your resume if you are interested in being considered for this position.

Assume leadership role with other electricians including those at another site – Buffalo/Wheatfield. Use a variety of electrician’s hand tools, measuring equipment, and testing instruments. Under the direction of and reporting to the Supervisor of Maintenance, the Senior Electrician is responsib

MUST have Active Department of Defense Government Clearance Valid NYS Drivers License and 1+ year of security experience.

Job Description Preconstruction Manager Summary Benderson Development is seeking a talented Preconstruction Manager to join our team in Buffalo, New York. The ideal individual will have commercial estimating experience and costing experience. This position works under the supervision of a Project Manager to solicit bids and obtain agreements with subs-contractors. Working directly with the estimating team for cost estimates and quantity take-offs. Principle Responsibilities and Duties Preconstruction: • Assist the Project Manager (PM) in soliciting project bids, including developing scopes of work, contacting contractors for pricing, summarizing and reviewing bids, and comparing itemized scopes to project estimates., • Support the PM in preparing bid summaries, drafting subcontracts, and performing other construction administration tasks., • Review construction plans to identify potential errors and omissions., • Contribute to the development of logistical sequencing plans and maintenance and traffic management plans., • Demonstrate an understanding of construction schedules and critical path methodology., • Accurately prepare a detailed cost estimate of all aspects of proposed projects including but not limited to quantity takeoff, detailed cost estimate, line item, and subcontractor summary by division., • Obtain, distribute, and manage plans or specifications as directed by the supervisor for proposed projects., • Review the summarized budget with the supervisor., • Maintain all unit prices and keep current in estimating programs and templates., • Adjust unit prices in the system as the market adjusts the prices., • A two-year construction degree, Construction Related Degree, or equivalent combinations of technical training and/or related experience is preferred., • Site Superintendents wanting to become a Project Manager are welcome to apply., • 4+ years of commercial estimating experience required, preferably with a general contractor or developer., • Analytical and problem-solving mentality, • Team player, self-motivated, gets along well with employees at all levels in the organization., • Capability to plan, prioritize and multitask with meticulous attention to detail within time constraints., • Strong and effective written and verbal skills., • Possess a solid understanding of construction site safety and the ability to identify and address safety concerns., • Strong Computer skills, Excel, Bluebeam, QTY take off programs. Please note that final offer amount will be dependent on geographic location, applicable experience and skillset of the candidate. Benefits: • 401(k) matching, • Dental insurance, • Employee assistance program, • Employee discount, • Flexible schedule, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Retirement plan, • Vision insurance

Job DescriptionProduct Engineer II Buffalo, NY $78,000-$85,000/year and Benefits Include - Health, Dental, and Vision insurance, 401K, Paid holidays and vacations, Tuition reimbursement program, Quarterly bonuses, Subsidized cafeteria costs, Peer recognition initiatives, Summer scholarships for children and grandchildren of employees, On-site gym Job Summary The Product Engineer II works independently and collaboratively to plan, design, and develop new products and manufacturing processes according to customer specifications and in accordance with company standard operating procedures by performing the following job duties. Job Duties • Coordinates development and startup activities with internal departments and customers. Manages and maintains project schedules to meet internal and customer deadlines., • Review customer specifications and needs. Translates this data into product engineering specifications., • Outlines materials, processes, tooling, and labor content., • Prepares prints, bills of material, process documentation, and other engineering documents., • Designs, develops, qualifies, and validates manufacturing tooling, equipment, and processes, • Maintains engineering documents to reflect changes in customer, vendor, or internal specifications., • Remains alert to new technologies (including process, materials, and equipment) which can improve cost margins, manufacturability, safety, throughput, and yields., • Assists sales department in estimating materials, labor, and tooling for preparation of quotations., • Demonstrates Company core values of honesty, integrity, and respect., • Ensure cost containment levels are maintained, • Recommend, design, and develop manufacturing process/procedure improvements, • Following all rules, regulations, and procedures set forth in the safety manual., • Promoting safety awareness throughout the workplace., • Alerting supervisors to any safety hazards they discover., • Wearing appropriate, proper protective equipment whenever required., • Using guards on tools and machinery whenever required., • Following proper lifting techniques using legs and not the back., • Operating any vehicles, equipment, tools, or machines only if they are authorized to do so., • Reporting any injury or loss immediately to the supervisor/team lead., • Promoting a positive attitude about safety and never performing any unsafe practice that could place the employee or others in danger., • Providing information to their immediate supervisor if a better and safer procedure can be implemented in performing any operation., • Assure when designing or modifying equipment/workstations that ergonomics and safety are reviewed and work to minimize hazards through engineering controls, administrative controls, and lastly personal protective equipment., • Decide which projects are priority relative to company goals, • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations., • Ability to advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations., • Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to write reports, business correspondence, and procedure manuals., • Communication Skills, • Understands regulated type industries, • Knowledge of medical device manufacturer and supplies knowledge preferred, • Bachelor’s Degree in Engineering discipline from a four-year college or university. Pay Details: $78,000.00 to $85,000.00 per year Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionAbout the Opportunity FLUENT, in exclusive partnership with Connected New York, is excited to be hiring for positions at our new state-of-the-art cultivation facility in Buffalo, New York. These roles offer the opportunity to join FLUENT's growing team while being part of Connected's highly anticipated expansion into one of the country's most dynamic and fast-growing cannabis markets. About Connected Connected family of companies. are a leading vertically integrated cannabis company based in Sacramento, operating in California, Arizona, and Florida. With over 11 years of experience, Connected specializes in breeding, growing, manufacturing, and distributing top-shelf cannabis through its state-of-the-art facilities and proprietary genetics. With over 250 employees across the United States, Connected has built a strong industry reputation and is now expanding into New York through a master services agreement with FLUENT. Connected's mission has always been to breed, grow, and sell the best cannabis in the world, setting the highest standards for its products, people, and partners wherever we go. About the Job The Cultivation General Manager is responsible for the overall operational responsibility for all day- to-day cultivation and operation activities of the Buffalo cultivation facility. The General Manager will provide leadership to the cultivation crew, manage all farm operations and serve as a liaison to Senior Management and Supply Chain keeping them abreast of operational changes and challenges. The General Manager will lead with excellence the production of FLUENT with Connected's New York premium flower offering. What You Will Do • Manage the cultivation team across propagation, cultivation, harvest, drying, curing and trimming to produce consistent optimized high product indoor cannabis production, • Maintain product quality through post-harvest SOPs, including environmental and moisture monitoring, • Organize workflow and manage cultivation team's daily tasks ensuring work quality, • Manage execution of all planting schedules, plant maintenance, fertigation and, IPM tasks etc., • Manage all post harvest activities including dry, cure, bucking, hand and machine trim, • Maintain trim team to high productivity with sufficient and efficient staff headcount based on production throughput, • Objectively oversee QC inspection process to ensure all products meet brand standards, • Excellent communication and collaboration with cultivation leadership to ensure issues and necessary protocol shifts have proper alignment, • Strong management of cultivation and trim teams; provide clear direction on protocols, corrective actions and performance management, • Hiring to ensure a strong team dynamic and adequate staff to maintain production throughputs on all plant work, trimming etc, • Forecast production, transfers, compliance testing and inventory as needed with supply chain and distribution, • Ensure equipment is properly functioning and all equipment maintenance is up to date, facilitate repairs, upgrades and maintenance as needed, • Responsive to issues from environment alarms, security issues etc after normal business hours; indoor farms are 24/7, 365., • Be proactive with security protocols as needed, • Maintain a clean, pest and disease-free environment, • Ensure all practices and activities are compliant for all cannabis activities, • Provide site leadership and team scheduling during inclement weather conditions, • Manage snow removal and facility access during winter, • Identify opportunities for improved efficiencies and cost savings, • Visit other cultivation sites to assess facility, plant and team opportunities in collaboration and alignment with cultivation leadership and colleagues, • Drive initiatives, research uptake, knowledge sharing and standardization through cross functional interactions with other cultivation teams and management., • Report back to leadership on site visits, any recommendations made and continued follow up with cultivation teams, • Other duties as assigned. What We Are Looking For • Minimum age of 21 years or older, • High school or equivalent, Degree in horticulture preferred, • 8+ years experience in cultivation or production management, • Expertise in indoor cultivation and with automated climate control indoor systems, • Strong knowledge of all internal current protocols, • Strong management and people skills to drive a positive productive team culture and accountability, • May require working rotating shifts with varied hours/day, including evenings, weekends, holidays, and special events, • Proven project management skills and experience managing complex deadlines, • Degree in Business Management, Horticulture Agriculture or other related field a plus, • Ability to operate within a tightly controlled track and trace environment, • Expert level knowledge of growing mediums, nutrient regimens, cultivation methodologies, environmental requirements and cultivation techniques., • Proficient understanding of cannabis laws, rules and regulations set forth by the state, • Fundamental knowledge, as well as the ability to be taught and guided in areas related to cultivation, • Must understand and implement the rules, regulations, policies, and procedures of the company and the cultivation department., • Adhere to the company mission statement, while maintaining high ethical standards and professionalism., • Must work well with others and ability to adapt quickly to changes in policy, procedure, methods and technique., • Use of independent judgment regarding product processing, keeping quality, projections and goals in mind., • Help create a proactive and positive environment; a positive attitude and self-motivation to help produce high quality product, while meeting and/or exceeding personal and/or company goals., • Ability to work with, help, guide, challenge and motivate other team members to create a cohesive unit., • Honestly identifies quality issues and raises them proactively to provide best path forward, • Follow basic instructions and ability to take constructive criticism from their managers to maintain quality standards and production goals., • Skill in analyzing potential problems with a plant or the product being processed., • Shows self-motivation/innovation and the ability to work well with all members of their staff and the company, as well as with their direct supervisor., • Ability to listen well and communicate effectively with various audiences, especially with the direct supervisors and other co-workers., • Pesticide applicators license, • Strong working knowledge of Microsoft Office – strong Excel skills required, • Other duties and tasks as assigned. Compensation Description (annually): The salary range for this position in the selected city is $120,000.00 - $150,000.00 annually. Compensation may vary outside of this range depending on a number of factors, including a candidate's qualifications, skills, competencies and experience, and location. Physical Requirements/Workplace Environment Must be able to lift up to a maximum of 50 lbs. occasionally without assistance or 100 lbs. with assistance. Regularly required to perform carrying, grasping, lifting, walking, standing, some bending/crouching, stooping, stretching, talking, hearing, seeing and repetitive motions. Must be able to stand for extended periods of time while maintaining focus. Able to be in varying temperature and humidity environmental conditions Work is performed in a fast-paced cannabis grow location. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Why Join Us? By joining FLUENT with Connected, you'll have the opportunity to: * Be part of Connected's highly anticipated entry into the New York market * Work with a team that combines Connected's proven genetics and brand strength with FLUENT's local expertise and cutting-edge cultivation facility * Help shape the future of premium cannabis in one of the country's most discerning markets Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent to this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instruction or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an "at-will" relationship. The company is an Equal Opportunity Employer, a drug free workplace, and complies with ADA regulations as applicable. #LI-LT1

The general purpose and function of the Site Supervisor encompasses the professional operation, administration, profitability, and quality assurance of uniformed services for a client's site. Site Supervisor DOD cleared Officer. Allied Universal is looking for a Department of Defense Cleared site Su

Focus on the core content of the job post, removing all extra metadata, navigation mentions, and redundant headers.Keep the content beautiful and high signal to noise ratio.

We are accepting applications to join our service/maintenance team at our Amherst apartment community in the position of Service (Maintenance) Technician.Our maintenance teams are responsible for the overall maintenance and physical condition of the apartments including work orders, preventive maint

Maintain the requisite knowledge of all security orders and skills pertaining to assigned duties, as well as working knowledge of applicable federal/state laws. Kesselring Site, and Naval Reactors Facility, and at the U.

Fortune 500 pharmaceutical company.GForce Life Sciences to provide a Senior Project Manager (SPM) who will provide senior level leadership in planning, budgeting, and overall management of major capital projects and initiatives from conceptualization through design, bidding, construction, commission

Work split between comfortable indoor environments and active construction job sites. Complete site cleanup, material organization, and light construction as needed. Communicate professionally with clients and site representatives to ensure expectations are met.

Project Manager – Structural & Custom Fabrication.A leading custom steel fabricator delivering complex structural, hydraulic, and mechanical components for major infrastructure, energy, and industrial projects across North America.Known for in-house engineering and precision execution.Seeking a Pr

Project Manager Structural & Custom Fabrication.A leading custom steel fabricator delivering complex structural, hydraulic, and mechanical components for major infrastructure, energy, and industrial projects across North America.Known for in-house engineering and precision execution.Seeking a Proje

Fortune 500 pharmaceutical company.GForce Life Sciences to provide a Senior Project Manager (SPM) who will provide senior level leadership in planning, budgeting, and overall management of major capital projects and initiatives from conceptualization through design, bidding, construction, commission

Foster a positive, respectful jobsite environment among subcontractors, vendors, and team members. Serve as the primary onsite point of contact for project teams, inspectors, and stakeholders. Familiarity with logistics and inspections on multi-trade commercial sites.

Supervisory experience recommended. Enjoy a high degree of autonomy, empowered by mutually determined priorities and objectives set by your supervisor.

The Operations Supervisor will provide technical support and direct supervision to manufacturing operations to meet business needs in a competitive manufacturing environment.

Oversight of general and sub contractors, workers on site, movement from site to site. New Jersey - Office / Industrial / Commercial - Site Foreman. Administrative work primarily with some site visits.

Provide on-site problem-solving, technical expertise, and serve as the primary technical contact for clients and project managers. Ensure job sites are professional, safe, and represent ITC with a high level of customer satisfaction. Maintain effective communication with Project Managers, Account Ex

A growing civil construction and site development firm is seeking a hands-on Senior Project Manager to lead complex land development and municipal infrastructure projects. The ideal candidate has 10+ years of field-driven experience, with a background in sitework and utility-heavy scopes. Oversee jo

Monitor and enforce job site safety in accordance with OSHA and company standards. Open to candidates from electrical contractor backgrounds with relevant site management experience. Ability to travel to project sites across New York State as needed.