Trabajos software engineer government en Anaheim, CaliforniaCrear alertas

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Software Engineering Job Code: 34734 Job Location: Anaheim, CA Schedule: 9/80 JOB DESCRIPTION: L3Harris Maritime Power & Energy Solutions (MPES) has an opening in the software engineering organization within its Maritime Systems sector site located in Anaheim, CA. Under general direction of the Management of Software Engineering, this position develops and applies advanced software engineering methods in the investigation and solution of complex and advanced technical problems power system architectures and power conversion equipment. The Senior Software Engineer shall lead software engineer team to support for all stages of product development from design through implementation and system integration under minimal supervision. ESSENTIAL DUTIES • Interpret customer specification to define requirements for software design., • Capture and document existing software product to meet qualification standards at highly regulated and safety critical government contracts., • Provide software technical leadership for the software developer team members., • Reviews project progress and helps in earned value reporting. Recommends corrections in technical approach to maximize efficiency of engineering resources., • Proactively seek performance improvement/enhancement for the SW team with DevSecOp assisted automation and streamlining., • Support new programs from conceptual design, through detail design to completion., • Bachelor of Science degree in Computer Engineering, Computer Science, Electrical Engineering, or equivalent from a four-year college or university; and minimum 6 years of experience in design and analysis of systems software for power conversion equipment. Master of Science or advanced degree preferred and a minimum of 4 years of prior related experience. Or in lieu of a degree, minimum of 10 years of prior related experience., • Ability to obtain and maintain a secret/security clearance., • Expertise in embedded real-time systems software design., • Experienced in object and service-based software architectures, a plus., • Experienced in embedded C and C++ programming., • Expertise with communication protocols, such as RS-232, RS-485, and Ethernet., • Experience in development and releasing software products meeting highly regulated and safety critical standards, medical or military grade software product, preferred., • Design familiarity with control systems and power conversion concepts is highly preferred., • Knowledge of power electronics and analog circuits, a plus., • Must be able to work as a key member of the design team with Power Design Engineers, Digital and Analog Engineers, System Engineers, Control System Engineers and Mechanical Engineers, • Knowledge of Python or C-Sharp is beneficial. In compliance with pay transparency requirements, the salary range for this role for California is $122,500- 177,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-RTC1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

Job Summary: Control Air Enterprises LLC is looking to hire an organized, timely, and respectful project engineer with a minimum of a bachelor’s degree in engineering, architecture or construction management to join our Anaheim office (Anaheim, CA). The project engineer must have short- and long-term processing abilities and demonstrate their ability to understand and comply with company, project, contractual requirements, and to provide clear and accurate documentation. Responsibilities will include but are not limited to the following: • Assist in managing large & complex HVAC construction projects., • Assist in managing subcontractor scope and performance of contractual requirements., • Assist in tracking field installation., • Organize, file, and track all project coordination and correspondence., • Accurate documentation to successfully track projects, including submittals, schedules, schedule, • Of values, billings, RFI’s (requests for information), requests for change orders, change orders,, • Project start-up and close-out (including timely processing of O&M’s and “as-built” packages)., • Learn all software programs utilized in the day-to-day business operations of the company. Basis of Evaluation: • Projects consistently meet or exceed expected profit objectives., • Effective control of deliveries to coincide with schedules and progress billing., • Timely review, approval, and submission of RFI's, requests for change orders, and change, • orders., • Timeliness and accuracy of submittals, project turnover and start-up packages., • Proper documentation of all projects reflecting the flow of the project., • Maintain and grow Control Air’s customer satisfaction and reputation. Required Characteristics: • Must have a strong work ethic and a “can-do” problem solving attitude., • Must be an excellent listener and communicator., • Must be proficient in Microsoft Office Outlook, Excel, and Word., • Bluebeam, Adobe editing, ACAD training is an advantage., • Experience in mechanical contracting is desired but not necessary., • Bachelor's degree in a Construction related profession or similar is required., • Must present a strong, confident and professional image., • Must be able to commute to different jobsites within the Bay Area. Skills: • Basic level of understating plans and specification., • Basic understanding of construction schedules., • Ability to interface with the clients., • Ability to coordinate with other team members., • HVAC/Mechanical Engineering (Preferred). Benefits include the following: • Medical, dental and vision benefits, • 401k retirement plan, • Life Insurance, • Long-Term Disability Insurance, • FSA & extra insurance, • Paid holidays, • Paid time off, • Employee stock ownership plan (ESOP) Pay range: $25 - $40 Hourly Join Us: Let’s be honest- life is too short to work at a job that you don’t love. So, do something about it! Come be a part of our team and work with us on industry defining projects. We are a family of passionate people, who are smart and kind, and have some pretty amazing skills. We love what we do, and love being California’s Homegrown Mechanical Experts. About Control Air Enterprises: We have been in business for over 42 years, are a full mechanical contracting firm specializing in Major Construction, Tenant Improvement, Industrial, Plumbing, Retrofit, Service, Controls, Energy Commissioning and Detailing. Our divisions can handle a wide range of projects and services that include Design Build, Design Assist and Plan & Spec for facilities in the Medical, Entertainment, Laboratory, Hotel, Resort, Office, Government, Education, Civic and Commercial industries. Oh, we are also 100% employed owned (ESOP), have over 1,000 family members, and have one of the largest fabrication shops in California. Our corporate headquarters are in Southern California (Anaheim - just south of Los Angeles), conveniently located near several major freeways. We also have offices in San Diego and Hayward (Northern California). Our manufacturing facilities are located in Anaheim (Southern California) and Hayward (Northern California). Equal Opportunity Employer, including disabled and veterans.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Software Engineering Job Code: 34734 Job Location: Anaheim, CA Schedule: 9/80 JOB DESCRIPTION: L3Harris Maritime Power & Energy Solutions (MPES) has an opening in the software engineering organization within its Maritime Systems sector site located in Anaheim, CA. Under general direction of the Management of Software Engineering, this position develops and applies advanced software engineering methods in the investigation and solution of complex and advanced technical problems power system architectures and power conversion equipment. The Senior Software Engineer shall lead software engineer team to support for all stages of product development from design through implementation and system integration under minimal supervision. ESSENTIAL DUTIES • Interpret customer specification to define requirements for software design., • Capture and document existing software product to meet qualification standards at highly regulated and safety critical government contracts., • Provide software technical leadership for the software developer team members., • Reviews project progress and helps in earned value reporting. Recommends corrections in technical approach to maximize efficiency of engineering resources., • Proactively seek performance improvement/enhancement for the SW team with DevSecOp assisted automation and streamlining., • Support new programs from conceptual design, through detail design to completion., • Bachelor of Science degree in Computer Engineering, Computer Science, Electrical Engineering, or equivalent from a four-year college or university; and minimum 6 years of experience in design and analysis of systems software for power conversion equipment. Master of Science or advanced degree preferred and a minimum of 4 years of prior related experience. Or in lieu of a degree, minimum of 10 years of prior related experience., • Ability to obtain and maintain a secret/security clearance., • Expertise in embedded real-time systems software design., • Experienced in object and service-based software architectures, a plus., • Experienced in embedded C and C++ programming., • Expertise with communication protocols, such as RS-232, RS-485, and Ethernet., • Experience in development and releasing software products meeting highly regulated and safety critical standards, medical or military grade software product, preferred., • Design familiarity with control systems and power conversion concepts is highly preferred., • Knowledge of power electronics and analog circuits, a plus., • Must be able to work as a key member of the design team with Power Design Engineers, Digital and Analog Engineers, System Engineers, Control System Engineers and Mechanical Engineers #LI-RTC1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Software Engineering Job Code: 34734 Job Location: Anaheim, CA Schedule: 9/80 JOB DESCRIPTION: L3Harris Maritime Power & Energy Solutions (MPES) has an opening in the software engineering organization within its Maritime Systems sector site located in Anaheim, CA. Under general direction of the Management of Software Engineering, this position develops and applies advanced software engineering methods in the investigation and solution of complex and advanced technical problems power system architectures and power conversion equipment. The Senior Software Engineer shall lead software engineer team to support for all stages of product development from design through implementation and system integration under minimal supervision. ESSENTIAL DUTIES * Interpret customer specification to define requirements for software design. * Capture and document existing software product to meet qualification standards at highly regulated and safety critical government contracts. * Provide software technical leadership for the software developer team members. * Reviews project progress and helps in earned value reporting. Recommends corrections in technical approach to maximize efficiency of engineering resources. * Proactively seek performance improvement/enhancement for the SW team with DevSecOp assisted automation and streamlining. * Support new programs from conceptual design, through detail design to completion. * Responsible to lead and operate Agile sprint/Kanban team, sprint planning, Jira ticket-based workflow management, and tracking toward team deliverable objectives. QUALIFICATIONS * Bachelor of Science degree in Computer Engineering, Computer Science, Electrical Engineering, or equivalent from a four-year college or university; and minimum 6 years of experience in design and analysis of systems software for power conversion equipment. Master of Science or advanced degree preferred and a minimum of 4 years of prior related experience. Or in lieu of a degree, minimum of 10 years of prior related experience. * Ability to obtain and maintain a secret/security clearance. * Expertise in embedded real-time systems software design. * Experienced in object and service-based software architectures, a plus. * Experienced in embedded C and C++ programming. * Expertise with communication protocols, such as RS-232, RS-485, and Ethernet. * Proven effective communication with Senior Project Management and customer representatives is essential. Preferred Additional Skills: * Experience in development and releasing software products meeting highly regulated and safety critical standards, medical or military grade software product, preferred. * Design familiarity with control systems and power conversion concepts is highly preferred. * Knowledge of power electronics and analog circuits, a plus. * Must be able to work as a key member of the design team with Power Design Engineers, Digital and Analog Engineers, System Engineers, Control System Engineers and Mechanical Engineers * Knowledge of Python or C-Sharp is beneficial. In compliance with pay transparency requirements, the salary range for this role for California is $122,500- 177,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___

Job Description At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. Role Overview: We're seeking a Head of Production to stand up and lead our flagship 100,000 ft² wire harness manufacturing factory in Orange County. This is a cornerstone role — the leader who will establish, scale, and operate our largest and most advanced factory as we grow from ~70 technicians today to over 200 by the end of 2026. You'll own all aspects of production operations — production, training, machine maintenance, facilities & EHS, and production control, with a mandate to build a high-accountability, high-performing organization that delivers both precision and scale. The ideal candidate is a seasoned manufacturing leader who thrives in fast-paced hybrid high-mix, high-volume environments and has a track record of building high-performing, scalable teams, processes, and systems from the ground up. What you'll own: • Factory Bring-Up, • Own the stand-up and commissioning of Senra's new Orange County factory — drive contractor execution, layout build-out, and an aggressive schedule to get the site fully operational by Q2., • Lead the personnel transition plan, coordinating the phased move of technicians and leadership from Factory 1 to Factory 2 to ensure business continuity., • Partner with Engineering on layout and workflow design to optimize flow, throughput, and space utilization., • Build the operational foundation to support both high-mix, low-volume and high-volume production for aerospace and defense customers., • Establish a replicable playbook that makes this site the model for future factory expansion., • Operations Leadership, • Set production goals, staffing plans, and throughput targets to meet on-time delivery, quality, and revenue objectives. Drive improvements through disciplined planning and continuous improvement., • Implement and sustain daily management systems, KPIs, and standard work across all departments., • People & Culture, • Build, develop, and lead a team of 200+ technicians and leaders, the majority of whom are early-stage career technicians advancing through structured training programs., • Partner with the People team to implement robust, quantifiable apprentice training and qualification systems to ensure consistent skill growth and product quality., • Foster a culture of accountability, integrity, and high performance — where expectations are clear, ownership is felt, and success is shared., • Develop and mentor emerging leaders to ensure depth of leadership bench as the site scales., • Systems & Process Development, • Partner with Software and Manufacturing Engineering to implement and enhance enterprise systems to meet production needs., • Build and standardize core processes — production control, materials flow, maintenance, training — that can scale and replicate across future factories., • 12+ years of progressive leadership experience in manufacturing operations, ideally in aerospace, defense, or other high-reliability, high-mix industries., • 8+ years of experience as a manufacturing, industrial, or operations engineer., • Proven success standing up or scaling a large factory from early-stage to steady-state operations., • Deep understanding of operations and production planning, quality systems, material flow, and team development., • Demonstrated ability to design and execute training, certification, and progression programs tied to measurable outcomes., • Strong business acumen — able to balance output, cost, and quality while building for long-term scalability., • Excellent leadership presence: decisive, transparent, and grounded in integrity., • Bachelor's degree in Engineering, Operations Management, or related field., • Compensation will be based on experience, qualifications, and other job-related factors., • Salary Range: $180,000-$250,000, • Unmatched opportunities to drive impact on a friendly and mission-driven team, • Own a piece of the pie with equity participation!, • Comprehensive medical, dental, vision, life and long-term disability coverage, • Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses, • 20 vacation days per year and 12 company holidays for rest and relaxation, • a 401(k) plan to set yourself up for retirement, • Choose a record you love, and we'll add it to our growing vinyl collection!, • $50/month DoorDash credit – lunch is on us!, • Up to $100/month reimbursement for gym memberships, • Fully stocked kitchen with snacks and beverages, • Regular team-building events, lunches, and the occasional breakfast burrito!, • Bright, open office with communal spaces for collaboration and free parking ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Pay range$180,000—$250,000 USD

Job Description At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. We're seeking a Senior Manufacturing Engineer to take ownership of complex wire harness programs across our customer portfolio. You'll develop engineering packages including detailed work instructions and formboards, drive process improvements and serve as the technical point of contact for assigned programs, working closely with production, quality and customers to deliver. You'll own programs end-to-end – managing customer relationships, solving complex technical challenges, developing build processes, and ensuring quality and delivery targets are met. You need to be self-sufficient, technically deep, and comfortable operating with minimal direction. This role reports to the Lead Manufacturing Engineer but operates with significant independence day-to-day. What you'll own: Manufacturing Engineering & Process Development • Lead planning and coordination of complex harness builds by developing comprehensive work instructions, formboards, and tooling solutions, • Establish manufacturing standards and processes that enable production to build efficiently and autonomously, • Drive improvements to quality, efficiency, and throughput through process benchmarking and workflow optimization, • Evaluate new parts and processes, determining optimal paths for assembly and scalability, • Commission new equipment, qualify processes, and optimize production flow as needed, • Work with the production team to surface systemic issues, translating recurring blockers into process improvements and engineering solutions, • Collaborate with the software team on digital solutions to improve traceability, workflow, and reporting, • Maintain 5S, lean manufacturing principles, and adherence to aerospace quality standards, • Serve as the primary technical liaison between production and assigned customers, • Manage complex technical inquiries, resolve escalated issues, and ensure adherence to stringent specifications, • Collaborate with the Program Management Team on program reviews and customer communications, providing technical depth and engineering rationale as needed, • Bachelor's degree in engineering, STEM-related field, or 8+ years of directly related hands-on manufacturing experience, • 5+ years of manufacturing engineering experience in fast-paced production environments (wire harness, electrical assembly, or similar), • Proven ability to work independently with minimal supervision in a high-accountability role, • Strong customer-facing skills with ability to manage technical relationships and communicate effectively, • Proficiency in CAD tools for creating assembly drawings and tooling designs, • Deep understanding of manufacturing principles: material workflow optimization, PFMEA, 5S, lean manufacturing, time studies, capacity planning, • Expert ability to evaluate parts and processes, determining optimal assembly approaches quickly, • Self-motivated problem-solver who thrives on autonomy and takes ownership of outcomes, • Certification or extensive experience with IPC-620 or NASA STD 8739.4 standards, • Deep expertise in aerospace and defense wire harness best practices and quality standards, • Experience at a contract manufacturing company managing multiple customer programs simultaneously, • Hands-on background with complex harness fabrication, box builds, connector mates, and electrical testing — used to inform engineering decisions, not as a primary job function, • Experience leading process improvement initiatives (Six Sigma, Kaizen) with documented efficiency gains, • 10+ years of overall manufacturing engineering experience with progressive responsibility, • Background with MES or ERP systems, • Compensation will be based on experience, qualifications, and other job-related factors., • Salary Range: $125,000-$160,000, • Unmatched opportunities to drive impact on a friendly and mission-driven team, • Own a piece of the pie with equity participation!, • Comprehensive medical, dental, vision, life and long-term disability coverage, • Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses, • 20 vacation days per year and 12 company holidays for rest and relaxation, • a 401(k) plan to set yourself up for retirement, • Choose a record you love, and we'll add it to our growing vinyl collection!, • $50/month DoorDash credit – lunch is on us!, • Up to $100/month reimbursement for gym memberships, • Fully stocked kitchen with snacks and beverages, • Regular team-building events, lunches, and the occasional breakfast burrito!, • Bright, open office with communal spaces for collaboration and free parking ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Pay range$125,000—$160,000 USD

Job Description Econolite® is an innovator of Intelligent Transportation System (ITS) solutions, products, and services. Our technology is helping save lives and making the Smart City a reality. If you want to be at the forefront of this intelligent technology revolution, we want to talk to you about being part of our team. Econolite is committed to employing the best talent that will make significant contributions to building a safer, connected world. Econolite’s ITS solutions ease traffic congestion, provide safer mobility, and improve quality of life. As the one-stop-shop leader for traffic management systems, sensor products, and services, Econolite is committed to the advancement of connected and autonomous vehicles, smart cities, and cybersecurity. The successful candidate will manage, maintain, and enhance the existing DevOps systems and infrastructure supporting Econolite’s market-leading traffic controller and detection products with the goal of minimizing downtime and idling of development activities. In addition, the individual will identify/research/propose/implement Continuous Integration and Delivery (CI/CD) architecture improvements, expeditiously troubleshoot and resolve issues based upon determined severity to ensure system uptime and availability, and design/develop/maintain the core embedded Linux system components and board support packages underlying the traffic controller and detection products. The individual will also collaborate closely with the Embedded Software Engineering and Software Quality Assurance teams with appropriate regular touchpoints to ensure stakeholder needs are met, outstanding issues addressed, and optimal performance achieved in a timely manner. DUTIES: • Manage, maintain, and enhance the DevOps systems and software build infrastructure., • Ensure availability and optimal performance of all build systems and pipelines., • Build and support the necessary development systems and infrastructure to meet the needs of the Embedded Software Engineering and Software Quality Assurance teams., • Evaluate the current DevOps systems, propose improvements, and undertake enhancement/migration projects as needed., • Alongside other engineers, work on the embedded Linux kernel, device drivers, system components, and board support packages powering the traffic controller and detection software applications., • Write efficient code, review pull requests, and debug issues. Develop low-level/system-level unit tests and performance tests, as necessary., • Contribute to the Engineering Wiki by documenting system architecture/topology, technical plans/designs, and system use/test instructions., • Work closely with the rest of the Engineering team as well as Product Management and ensure stakeholder needs are met in a timely manner., • Bachelor’s degree in Computer Science/Engineering or other Engineering/technical discipline, • 3+ years of experience as a DevOps engineer or in a similar role within an engineering team, • High proficiency in source code management systems/tools (Team Foundation Server or Azure DevOps, Git, and Jenkins) and virtualization/containerization technologies (vSphere, Docker), • Proven experience in developing/maintaining/troubleshooting/migrating CI/CD systems, • Understanding of Linux/embedded Linux kernel, system/network internals, and system performance optimization; experience in hardware layer communication, device driver development is a plus, • Strong development experience with C, C++, Python, and POSIX shell scripting, • Demonstrated written and verbal communication skills; ability to clearly and effectively present and discuss technical matters, • Must be able to stand, walk, squat, and bend at the waist for extended periods of time All candidates who accept employment will be subject to a background investigation and drug screening. For applicable roles, candidates who accept employment will also be subject to a Motor Vehicle/Driving Record screening. COMPENSATION The base pay range for this full-time exempt position is $90,000.00 - $130,000.00 per year plus benefits. Pay ranges are determined by various factors, including role, experience, and location. The pay range displayed reflects the minimum and maximum target for new hire base pay rates for this position. Within the range, actual individual compensation is determined by various factors, including location, job-related skills, experience, and relevant education or training. BENEFITS This role is eligible for benefits: weekly pay, weekly PTO accrual, paid holidays. Various medical plans, dental, vision, flexible spending accounts, direct deposit. Basic life, LTD, 401k discretionary match. Other voluntary benefits include: identity theft protection. DISCLAIMER The above statements are intended to indicate the general nature and level of work performed by employees within this classification. They are not designed to contain or be interpreted as an exhaustive list of all duties, responsibilities, skills, and qualifications required of employees assigned to this job. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, marital status, lactation, ancestry/national origin, citizenship, age, disability, arrest and court records, military & veteran's status, Genetic Information & Testing, Family & Medical Leave, or any other classification protected by state or federal law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. An Equal Opportunity Employer - Non-Smoking Facility

Job Description JOB DESCRIPTION Project Engineer – Environmental Monitoring Systems Description: Come join our team and be part of a technically innovative company that is helping our clients be more environmentally friendly with air emissions. The Project Engineer will perform engineering, design, and configuration activities for Continuous Emissions Monitoring Systems (CEMS) focused on measuring and reporting hazardous air pollutants regulated by federal, state, and local government agencies. CEMS projects typically use varying measurement principles, including chemiluminescence, paramagnetic cells, tunable diode lasers, etc. The Project Engineer will also become familiar with the components and functioning of the Data Acquisition and Handling System (DAHS) using Programmable Logic Controllers (PLC) or data logger devices with Windows based computer systems. Please Note: Position is open to qualified remote candidates. General Responsibilities: -Engineering design of electrical & instrumentation packages -Setup and use of mathematical formulas for pollutant data including data storage in SQL databases -Preparation and submittals of design documents, I/O lists, and CAD drawings -Interfacing with suppliers and evaluating new technologies and approaches -Field commissioning activities as needed -Manage schedule, budget, customer correspondence, and contract issues on assigned projects -Supporting Factory Acceptance Tests and Field Technicians in person or via phone and email -Controls configuration and programming, including sequencing, data handling, and logic -Programming of PLC and HMI systems Qualifications: -1-3 years electrical, mechanical, and instrumentation engineering design experience preferred -Bachelor’s degree engineering (Chemical, Electrical, Environmental or Mechanical) -Computer experience in Windows OS and networking experience -Experience with packaged system design via CAD drawings, Bills of Materials, and customer drawing submittals -Willing to travel to complete field work (up to 30%) -Excellent English language written and oral communication skills -Preferred: Experience managing engineering projects including customer interface -Previous experience programming PLC, SCADA, DCS, or HMI -Organized mindset with detailed abilities to troubleshoot industrial equipment (signals and logic) -Works well in project teams in a collaborative environment Company DescriptionCemtek KVB-Enertec is the leader in the Continuous Emissions Monitoring Systems (CEMS) Industry, selling gas analyzer systems and industry specific emissions monitoring software across the country and globally, with a diversity of clients across power, refinery, petro-chemical and manufacturing industries. We seek to exceed all of our clients emissions monitoring needs and expectations with high quality products, skilled engineering and outstanding customer service.Cemtek KVB-Enertec is the leader in the Continuous Emissions Monitoring Systems (CEMS) Industry, selling gas analyzer systems and industry specific emissions monitoring software across the country and globally, with a diversity of clients across power, refinery, petro-chemical and manufacturing industries. We seek to exceed all of our clients emissions monitoring needs and expectations with high quality products, skilled engineering and outstanding customer service.

Job Description Overview National Award-Winning Studio & Winner of Design Firm of the Year is actively seeking Structural Project Engineers of all levels to join their Anaheim, Los Angeles, or Rancho Cucamonga office. With over 19 offices across the U.S., the award-winning architecture + engineering firm specializes in K-12 through college/university, healthcare, sports and corporate business sectors across the U.S. The company has won over 500 design awards and is recognized for shaping learning environments for students and the community. It's well established culture has also led the firm being named to the list of “Best Places to Work.” For over forty years, the multidisciplinary studio has created a client base of more than two-hundred clients, a list that includes university systems, hospital system, school districts, and Fortune 500 companies. The Structural Division The Structural Division specializes in comprehensive structural engineering planning and design services, including structural assessments and forensics investigations. Their engineers have extensive experience and knowledge of structural engineering services for education, commercial, religious, healthcare, sports & entertainment, hospitality, retail, and federal/government. They offer our employees a highly competitive salary and benefits package along with numerous opportunities to become involved in extra-curricular activities and organizations established through the firm. Essential Duties & Responsibilities The Project Engineer will operate independently while receiving direct guidance from the Engineer of Record, contributing to the coordination and design of diverse structural projects throughout both design and construction phases. This role presents an outstanding opportunity for professional growth and career advancement within our forward-thinking structural engineering firm. They provide a highly competitive salary and benefits package. Success in this position requires an attentive, client-oriented individual with a flair for creative problem-solving. * Actively engage in coordination meetings with diverse stakeholders, including other disciplines, clients, and owners, and contribute to design review meetings. * Efficiently coordinate the design process to produce comprehensive construction documents within the specified project schedule and budget. * Skillfully prepare structural specifications, select construction procedures, determine materials and member sizes, and conduct all necessary calculations essential for design. * Play a crucial role in shop drawing reviews, responding to RFI’s (requests for information), handling change proposal requests, and seamlessly incorporating changes into project documents. * Utilize strong written and verbal communication skills to effectively convey design and coordination elements to other members of the project team. * Conduct site observations and walks during construction, preparing detailed reports to ensure project alignment with design intent and specifications. Education and Work Experience Requirements * Hold a Bachelor’s degree in civil engineering with a Structural emphasis. * Bring a minimum of 6 years of full-time progressive experience in structural engineering. * Possess a Professional Engineering license (P.E.) is required. * Demonstrate a robust understanding of the California Building Code (CBC) and all relevant design codes such as ASCE, AISC, ACI, MSJC, NDS, etc. * Exhibit proficiency in widely-used structural engineering and office tools, including ETABS, SAFE, RISA, RAM, ENERCALC, Excel, Bluebeam, etc. * Showcase a high level of proficiency in performing complete gravity and lateral analyses using design software, along with preparing comprehensive structural engineering calculation packages. * Preferably have familiarity with educational projects and knowledge of DSA (California applicants only) requirements and processes. * Demonstrate expertise in the design of various structural materials, encompassing steel, concrete, masonry, wood, etc. * Exhibit proficiency in drafting and navigating Revit and AutoCAD, with a preference for experience in these platforms. * Possess excellent written and verbal communication skills. Additional Notes for California Applicants While the majority of their projects focus on K-12, their portfolio extends to encompass higher education, government buildings, sports facilities, fire stations, and modifications to existing structures. While expertise in educational projects and familiarity with the DSA process (California only applicants) are advantageous qualities in potential candidates, they also welcome individuals with a strong academic background and relevant experience in general building design in California. We look forward to receiving your application! Apply today to learn more.

Job Description About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: Design Specialist Senior is responsible for designing building automation and controls projects that meet contractual scope, budget, and performance requirements. This role develops detailed sequences of operation, interprets project documents and estimates, selects compatible equipment, and creates complete bills of material. The position independently designs large and complex projects, prepares construction plans and RFIs, and communicates effectively with internal teams, consulting engineers, contractors, and building owners. Additional responsibilities include labor forecasting, mentoring junior engineers, contributing to engineering standards, and recommending new products or solutions that improve value and functionality. Responsibilities: • Design Controls projects to meet scope of work and budget as defined by contract documents and sales estimate ensuring equipment compatibility., • Provide detailed sequence of operations., • Interpret project documents, estimate, and other information as available to select the proper equipment to achieve the scope of work required in the most economical and functional manner., • Accurately forecast necessary labor required to engineer a complete project and track this over time to achieve budget and forecast goals., • Communicate with internal employees as required to ensure engineering is accurate and timely., • Communicate with external organizations as required such as consulting engineers, building owners, and other contractors to ensure accurate and timely engineering., • Complete Bill of Material for every project., • Suggest/recommend new products that provide better functionality and value to projects., • Generate Request for Information (RFIs) to clarify design issues and recommend appropriate solutions as necessary., • Create detailed plans to show electricians and system specialists sensor locations, • Demonstrated ability to independently design large and complex projects with minimal oversight., • As assigned develop and maintain a library of engineering standards for both Climatec and the industry., • Provides mentorship to Level I and Level II team members., • Other duties as assigned. Required Qualifications: • High school diploma or equivalent., • 8 - 10 years of experience in HVAC/building automation design., • Basic understanding of computer systems, including Microsoft Office Suite (Word, Excel, Outlook, etc.)., • Experience designing, and engineering HVAC control systems, including developing sequence of operations and equipment selection., • Proficiency with reading and creating layout drawings to guide system installation (e.g., sensor locations, panel placement., • Ability to develop Bills of Material (BOM)., • An understanding of Autocad and/or Visio for BAS Design, • Familiarity with generating and managing RFIs (Requests for Information) to resolve design issues., • Strong understanding of project documents, scopes of work, and the ability to interpret contract drawings and specifications., • Ability to read and interpret mechanical and electrical plans., • The ability to read electrical wiring diagrams., • Strong written and verbal communication skills., • Proven ability to work on multiple projects simultaneously in a fast-paced environment., • Strong interpersonal skills with the ability to navigate and resolve issues empathetically and professionally. Preferred Qualifications: • Undergraduate degree in Electrical, Mechanical, or a related technical field. Experience in the BAS field can supersede a degree., • Minimum of 8 years of experience in HVAC/building automation design., • Experience with AutoCAD and/or Visio, • Thorough understanding of HVAC operations, particularly within commercial or industrial facilities., • Proposing cost-effective technical solutions., • Experience interacting with external stakeholders, such as consulting engineers, contractors, and building owners., • Experience maintaining or contributing to internal standards, libraries, or best practices for system design and engineering., • Background in both design and ongoing support/service engineering for installed building systems Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. • Must be able to effectively communicate, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers; manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate Additional Information: • Compensation: $115,000 - $125,000, • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. The Technical Sales Engineer will be responsible for preparing accurate, detailed cost estimates for wire harness assemblies in an AS9100 manufacturing environment. This role requires interpreting complex technical documentation and ensuring accurate bids are created. The Technical Sales Engineer will support as the bridge between customers, estimating/programs team, and internal ME/OPs. Making sure to accurately scope and cost incoming customer requests. Collaborating closely with engineering, operations, supply chain, and program management to develop competitive proposals that align with company goals. What you'll own: • Review drawings, BOMS, and specifications to ensure accurate understanding of customer requirements, • Develop detailed labor estimates factoring in processes such as crimping, soldering, testing, and inspection that are in alignment with production capabilities, • Support in creating BOMs with 80% accuracy, • Partner with Manufacturing Engineering and Leadership on appropriate cost targets, • Analyze time study data to ensure realistic estimates are created, • Identify and highlight potential risks, • Bachelor's degree in Engineering, Manufacturing Technology, or related field., • Strong understanding of wire harness/cable assembly manufacturing processes per IPC/WHMA-A-620., • Excellent analytical and mathematical skills., • Proficiency in Microsoft Excel, Word, and Outlook., • Strong organizational and communication skills., • High attention to detail with the ability to manage multiple projects and deadlines., • Previous estimating experience in aerospace or defense manufacturing., • Familiarity with AS9100 standards and aerospace industry requirements., • Experience with ERP/MRP systems., • Compensation will be based on experience, qualifications, and other job-related factors., • Salary Range: $100,000-$150,000, • Unmatched opportunities to drive impact on a friendly and mission-driven team, • Own a piece of the pie with equity participation!, • Comprehensive medical, dental, vision, life and long-term disability coverage, • Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses, • 20 vacation days per year and 12 company holidays for rest and relaxation, • a 401(k) plan to set yourself up for retirement, • Choose a record you love, and we'll add it to our growing vinyl collection!, • $50/month DoorDash credit – lunch is on us!, • Up to $100/month reimbursement for gym memberships, • Fully stocked kitchen with snacks and beverages, • Regular team-building events, lunches, and the occasional breakfast burrito!, • Bright, open office with communal spaces for collaboration and free parking ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Pay range$100,000—$150,000 USD

Job Description POSITION SUMMARY The Quality Engineer is responsible for developing, implementing, and maintaining quality standards, methods, instructions, and quality planning on assigned programs. The role includes performing supplier surveys, internal audits, and process audits. The Quality Engineer will support engineering, manufacturing, program management, and quality groups, and will be actively involved in continuous improvement initiatives and customer/supplier interactions. POSITION DUTIES/RESPONSIBILITIES · Review customer Purchase Order and Contract requirements to communicate quality requirements to responsible departments. · Perform internal and process audits, as assigned. · Provide technical direction and support to inspection. · Review and approve drawings and product build (work orders) documentation. · Review product discrepancies in manufacturing, perform investigations and coordinate with manufacturing and engineering to resolve problems. · Document, track and communicate Quality Plans, test results, analysis & unresolved problems. · Perform AS9102 First Article Inspection Reports · Represent Quality Assurance in day-to-day communication with customers and suppliers, including certifications, data, and corrective actions. · Perform supplier surveys, as assigned. · Review supplier purchase requisitions and apply appropriate quality requirements. · Support assigned Quality Assurance tasks, as required. · Support the company’s training program by creating, reviewing, and updating training materials. · Participate in and lead continuous improvement and Lean Manufacturing initiatives. SKILLS & ABILITIES · Excellent verbal and written communication skills. · Excellent interpersonal and customer service skills. · Excellent organizational skills and attention to detail. · micrometers, height gauges, etc. · Working knowledge of Mil-Spec and government contract requirements. · Working knowledge of ISO 9001 and AS9100 Quality Management Systems requirements. · Analytical and problem-solving ability · Excellent time management skills with a proven ability to meet deadlines. · Ability to function well in a high-paced and at times stressful environment. · Proficient with Microsoft Office Suite or related software. Education and Experience Education: Bachelor's Degree (four-year college or technical school) Preferred. Or equivalent experience. Field of Study: or related field and/or equivalent experience. Experience: Minimum of 3 years of experience as a Quality Engineer, in a manufacturing environment. PHYSICAL DEMANDS N (Not Applicable) Activity is not applicable to this position. O (Occasionally) Position requires activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Position requires activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Position requires activity more than 66% of the time (5.5+ hrs/day) Physical Demands Lift/Carry • 10 lbs or less O, • 11-20 lbs O, • 21-50 lbs N, • 51-100 lbs N, • Over 100 lbs N Push/Pull • 12 lbs or less O, • 13-25 lbs O, • 26-40 lbs N, • 41-100 lbs N Other Physical Requirements · Must be able to remain in a stationary position such as working at a desk on a computer for prolonged periods of time. · This position requires you to occasionally move about the office to access filing cabinets, office machinery, etc. · Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine, and computer printer. · The ability to communicate information and ideas so others will understand. Must be able to exchange accurate information in these situations. · The ability to observe details at close range (within a few feet of the observer). · This position requires the ability to navigate and access all areas of our campus. · Ability to wear Personal Protective Equipment (PPE) - Required Safety Glasses WORK ENVIRONMENT This position requires an on-site presence. Working conditions are 50% a normal office/lab environment and 50% a manufacturing environment and may be noisy at times. Work may require occasional weekend and/or evening work. The company has reviewed this job description to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills, and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the company reserves the right to change this job description and/or assign tasks for the employee to perform, as the company may deem appropriate. Company DescriptionApex Space and Defense prides itself on delivering the highest quality, large- and small-scale composite structures for our aerospace, defense, and commercial customers. APEX, Santa Ana, has over 50 years of experience from our roots in auto racing through years of supporting aerospace and defense. The key to our success is largely dependent on our dedicated family of hard-working team members with a can-do attitude. We’re currently searching for a Service Technician to join our ranks and continue our tradition of success.Apex Space and Defense prides itself on delivering the highest quality, large- and small-scale composite structures for our aerospace, defense, and commercial customers. APEX, Santa Ana, has over 50 years of experience from our roots in auto racing through years of supporting aerospace and defense. The key to our success is largely dependent on our dedicated family of hard-working team members with a can-do attitude. We’re currently searching for a Service Technician to join our ranks and continue our tradition of success.

Job Description Econolite® is an innovator of Intelligent Transportation System (ITS) solutions, products, and services. Our technology is helping save lives and making the Smart City a reality. If you want to be at the forefront of this intelligent technology revolution, we want to talk to you about being part of our team. Econolite is committed to employing the best talent that will make significant contributions to building a safer, connected world. Econolite’s ITS solutions ease traffic congestion, provide safer mobility, and improve quality of life. As the one-stop-shop leader for traffic management systems, sensor products, and services, Econolite is committed to the advancement of connected and autonomous vehicles, smart cities, and cybersecurity. Under the direction of the Senior Manager of Test and Support Engineering, the Senior Traffic Applications Engineer serves as a subject matter expert in traffic engineering, traffic operations, and detection technologies, leading testing and validation efforts for Econolite’s traffic control and detection products. This role is responsible for testing advanced systems, analyzing complex customer applications, troubleshooting field issues, and ensuring products meet industry standards and operational requirements. This role will collaborate closely with development, product management, and systems engineering teams to influence product direction and feature implementation. With a strong background in traffic signal operations and detection system performance, the ideal candidate will also drive continuous improvement in testing methodologies and application support, helping to shape the future of Econolite’s traffic management and detection solutions. DUTIES: • Lead the creation and execution of comprehensive test plans and test cases for embedded software across Econolite’s traffic controller and detection product lines., • Apply expert knowledge of traffic engineering principles, signal operations, and user behavior to develop realistic and high-impact test scenarios., • Evaluate and troubleshoot detection product performance, including radar and video-based systems, using a strong understanding of analog/digital signals and network topologies., • Work closely with engineers, product managers, project/program managers, and other team members throughout all stages of product development., • Review customer specifications and field configurations, identifying gaps and proposing design-level solutions to meet or exceed performance and operational requirements., • Bachelor’s degree in Civil Engineering (Transportation), Electrical Engineering, or a related technical discipline, or equivalent demonstrated technical experience., • 7+ years of hands-on experience in traffic engineering, traffic signal operations, or detection systems, with progressive responsibility in technical roles., • Proven expertise in traffic controllers, sensor technologies (radar and video), and signal turn-on/configuration procedures., • Strong working knowledge of interpreting and troubleshooting electronic schematics, wiring diagrams, and field network topologies (including TCP/IP, VLANs, and routing/switching environments)., • Proficiency in Linux and Windows environments, with experience using diagnostic tools such as Wireshark, logic analyzers, or serial/network monitors., • Experience working directly with customers or agencies, providing field support, troubleshooting, and technical resolution., • Experience in test automation and scripting (e.g., Python, C, or C++) is a significant plus. COMPENSATION The base pay range for this full-time exempt position is $100,000.00 - $125,000.00 per year plus benefits. Pay ranges are determined by various factors, including role, experience, and location. The pay range displayed reflects the minimum and maximum target for new hire base pay rates for this position. Within the range, actual individual compensation is determined by various factors, including location, job-related skills, experience, and relevant education or training. PHYSICAL REQUIREMENTS Primarily an office-based role with occasional work in lab or field environments. Must be able to lift up to 25 pounds and travel to customer or company sites as needed. BENEFITS This role is eligible for benefits: weekly pay, weekly PTO accrual, paid holidays. Various medical plans, dental, vision, flexible spending accounts, direct deposit. Basic life, LTD, 401k discretionary match. Pet insurance, identity theft protection. DISCLAIMER The above statements are intended to indicate the general nature and level of work performed by employees within this classification. They are not designed to contain or be interpreted as an exhaustive list of all duties, responsibilities, skills, and qualifications required of employees assigned to this job. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, marital status, lactation, ancestry/national origin, citizenship, age, disability, arrest and court records, military & veteran's status, Genetic Information & Testing, Family & Medical Leave, or any other classification protected by state or federal law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. An Equal Opportunity Employer - Non-Smoking Facility

Job Description At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. We're seeking a hands-on Automation Engineer to maximize the capability of our existing automated equipment and identify, design, and commission new machines while assisting with the development of Senra's automation roadmap. You'll be the technical expert who bridges the gap between leadership's automation vision and shop floor reality - getting immediate value from underutilized equipment while planning strategic investments for our expanded facility. This isn't a research role or a pure controls engineering position. You'll be in the shop programming machines, designing fixtures, troubleshooting issues, and training our team. You'll have direct impact on our ability to scale production efficiently while maintaining aerospace quality standards. This role reports directly to the Manufacturing Engineering Manager. What you'll own: • Equipment Optimization & Utilization (50%), • Assess current automated wire preparation, crimping, cutting, and testing equipment to identify capability gaps, • Evaluate reliability and robustness of machine-MES integration and partner with software and product teams to drive improvements, • Program and optimize machine parameters for improved throughput, quality, and setup efficiency, • Troubleshoot electrical, mechanical, and controls issues on production equipment, • Deliver measurable utilization improvements on existing automation assets, • Work with equipment vendors on capability enhancements, upgrades, and technical support, • Custom Tooling & Fixture Development (20%), • Design and implement custom tooling and fixtures to expand automated processing capability across product mix, • Fabricate and validate tooling solutions quickly to support production needs, • Integrate equipment into streamlined production workflows to minimize material handling and cycle time, • Automation Strategy & Expansion (20%), • Work with leadership to develop and maintain a clear automation roadmap aligned with production capacity targets, • Support facility expansion by specifying, evaluating, and commissioning new automation equipment, • Create business cases for automation investments with clear ROI and capacity impact, • Training & Documentation (10%), • Train manufacturing engineers and technicians to handle routine equipment programming and troubleshooting independently, • Create documentation for equipment setup, programming, utilization, and maintenance procedures, • Bachelor's degree in Electrical Engineering, Mechanical Engineering, Mechatronics, or related field or an associates degree and 7+ years of experience, • 5+ years hands-on experience with manufacturing automation equipment, • Strong PLC programming skills and HMI development experience, • Proven ability to design and fabricate custom tooling, fixtures, and end effectors, • CAD skills for fixture design (SolidWorks, Fusion 360, or equivalent), • Electrical troubleshooting and controls diagnostics capability, • Experience with machine parameter optimization for throughput and quality, • Self-directed problem-solver who can identify issues and drive pragmatic solutions, • Strong project management and communication skills with ability to engage effectively with technicians, engineers, and executives, • High-mix, low-to-medium volume manufacturing background, • Experience with automated wire processing equipment (crimpers, cutters, strippers, testers), • Familiarity with Komax, Schleuniger, Cirris, or similar equipment brands, • Wire harness, cable assembly, or electronics manufacturing experience, • Aerospace/defense manufacturing experience and understanding of AS9100 requirements, • Lean manufacturing principles and quick changeover techniques, • Hands-on machining or fabrication skills, • Compensation will be based on experience, qualifications, and other job-related factors., • Salary Range: $150,000-$200,000, • Unmatched opportunities to drive impact on a friendly and mission-driven team, • Own a piece of the pie with equity participation!, • Comprehensive medical, dental, vision, life and long-term disability coverage, • Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses, • 20 vacation days per year and 12 company holidays for rest and relaxation, • a 401(k) plan to set yourself up for retirement, • Choose a record you love, and we'll add it to our growing vinyl collection!, • $50/month DoorDash credit – lunch is on us!, • Up to $100/month reimbursement for gym memberships, • Fully stocked kitchen with snacks and beverages, • Regular team-building events, lunches, and the occasional breakfast burrito!, • Bright, open office with communal spaces for collaboration and free parking ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Pay range$150,000—$200,000 USD

Job Description The Supplier Quality Engineer will be responsible for executing and expanding on key initiatives inside of the supplier quality organization. The Supplier Quality Engineer will be responsible for executing various supplier quality engineering related activities such as Compliance, Process, and Product Audits, MRB, FAI Witnessing, Review and Sign off, Problem Solving, Corrective and Preventive Actions, Supplier Performance Reporting and other Quality Improvement Activities. Job Responsibilities: • Assess suppliers manufacturing and quality processes through performing supplier audits following various standards depending on the type of audit. Audits may include but not limited to the following: AS9100 Compliance Audits, special processes, APQP audits, process, and product audits., • Lead and/or support MRB activities to achieve optimal disposition of non-conforming material and ensure that adequate corrective actions are implemented., • Perform on-site supplier visits for root cause analysis and verification of corrective actions of supplier quality issues, • Promote and facilitate the use of customer preferred techniques for continuous improvement such as Lean, Six-Sigma, Poka-Yoke, and Process Failure Mode and Effects Analysis (PFMEA), • Facilitate the escalation of unresolved supplier quality issues within assigned projects and suppliers., • Support suppliers in the evaluation of existing manufacturing or business processes, identification of opportunities for improvement, and development of solutions to optimize supplier performance using various problem-solving techniques., • Provide technical guidance and assistance to suppliers to solve process and product quality issues and improve internal and outgoing quality performance., • Develop and maintain detailed and accurate reporting of supplier performance and quality improvement progress. Report weekly and monthly on supplier progress to meet customer expectations., • Undertake special projects as required, • Develop and maintain strong relationships with internal and external stakeholders to ensure optimal performance., • Communicate efficiently and effectively with all stakeholders to ensure timely and effective responsiveness to abnormalities. Required Skills • 8+ years of hands-on experience as a Quality Engineer in an Aerospace Manufacturing Environment, • 5-8 years of FAI experience with AS9102 (FAI) standards at a quality engineering level., • Strong understanding of various Engineering Processes, Standard Drawings Conventions, Interpreting Drawing, Specifications, and GD&T, • 5-8 years' experience hands-on experience with the ISO9001 and AS9100 Quality Management Systems Processes, especially in Production, Quality, and logistics, • Knowledge of, (or hands-on experience preferred), with FAA, EAR, and ITAR standards and regulations, • Experience leading customer audits, • Strong verbal, written and communication skills, • Project management, time management, problem solving and organization, • Ability to pass background and drug screen, • Valid drivers license and auto insurance required., • Vision exam is required prior to hire. Requirements are as follows:, • The General Vision Acuity Test shall be performed by an Oculist, Optometrist or other professionally recognized person. The following requirements shall apply., • Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches), • Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50, • Color Perception – 6 of 9 Orthorater plates, • Bachelor's degree from an accredited college in a technical discipline, (i.e., Industrial Engineering, Mechanical Engineering, Quality Management, etc.), • ASQ or equivalent professional certifications such as CQE, CQT, CQA, CMQ, CSQP …etc. BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • Requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded) Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. . Powered by JazzHR gS3nA1u1C8

Job Description Corvid Technologies is seeking a Systems Engineer to lead systems engineering, integration, and test across advanced development programs in resilient navigation/assured PNT and munition lethality optimization. This role leads the end-to-end technical baseline - requirements, architecture, interfaces, verification approach, and integration/test execution - while coordinating closely with Government stakeholders and program partners. The ideal candidate is comfortable bridging modeling and simulation, embedded implementation, and representative testing to mature prototype capability from laboratory demonstrations to relevant-environment validation. This position is expected to provide technical leadership across multiple parallel efforts as programs scale. This leadership position will join a small, growing team responsible for developing A-PNT hardware technology for a variety of applications. The leader will need to be comfortable working with multi-disciplined team distributed across multiple Corvid locations. The role can be located at any Corvid facility across the country with a preference for joining our team in the Anaheim area. The role will be required to travel for partner/customer meetings as well as test events. Responsibilities: • Own the system technical baseline (CONOPS, requirements, architecture, verification strategy), • Lead SRR/PDR/CDR/TRR planning and execution; author and review key technical artifacts, • Manage interfaces and configuration-controlled documentation (ICDs, traceability, test matrices), • Lead sensor and subsystem trade studies and integration planning (SWaP-C, environments, measurement accuracy), • Integrate mission algorithms (e.g., sensor fusion, navigation) into prototype hardware/software, • Plan and execute integration and test events (bench, HWIL/HIL, ground tests, flight/live-fire as applicable), • Correlate M&S/Monte Carlo results to test data; drive model updates and decision-ready tradeoffs, • Drive data collection, reduction, and reporting to quantify performance improvements, • Candidate must be a US Citizen and meet eligibility to obtain (and maintain) a Secret Clearance (preferred candidate will already possess at least a Secret Clearance), • Bachelor's Degree in an Engineering discipline (or related STEM field) and at least 15 years of experience related to systems engineering for defense systems (munitions, sensors, GNC, avionics, or similar), • Demonstrated experience both leading and contributing technically from requirements/architecture through SRR/PDR/CDR, followed by executing into integration and test, • Experience with energetic systems (integration of energetics or integrating systems with energetics), fuzing/arming concepts, or weapon effects/lethality assessments, • Experience with multi-sensor fusion/estimation and real-time implementation constraints, • Experience correlating physics-based M&S to test results; familiarity with HPC-enabled Monte Carlo analyses Corvid Technologies is an engineering firm specializing in using high-fidelity, computational modeling and simulation to analyze, design, and manufacture products for aerospace, DoD, and commercial customers. We offer a fast-paced and flexible work environment that encourages creativity and collaboration. Our team works on difficult, cutting-edge technical challenges using state-of-the-art technologies and resources. Why Corvid: We value our employee-owners and, in addition to providing challenging work opportunities and competitive pay, Corvid believes in providing a strong benefit package that provides value to our team members at all stages of their career. Corvid benefits include: • Employee Stock Ownership Plan via our generous 401(k) matching, • Medical insurance via Blue Cross - including a PPO and high-deductible offering (with company HSA contribution), • Paid time off (PTO) based on years of industry experience (not tenure), • Career development and continuing education opportunities, • Company-provided life, long-term and short-term disability insurance, • Incentive opportunities to reward strong performance and corporate growth

Job Description About the Company Mission Microwave Technologies was founded in 2014 to revolutionize the next generation of Solid-State Power Amplifiers (SSPAs) and Block Upconverters (BUCs). We leverage advanced GaN transistors, proprietary power-combining techniques, and innovative full-system designs to deliver the industry’s most efficient, compact, and lightweight high-power SSPAs. With more than 100 years of combined leadership experience supplying high-performance, high-reliability RF solutions to commercial, military, and space customers, Mission Microwave has grown rapidly over the past decade and is backed by a private equity firm committed to long-term innovation and expansion. We are proud to be ranked #23 on Fortune’s Best Workplaces in Manufacturing & Production and to have been recognized as a Great Place to Work® since 2022. Mission Microwave is headquartered at 6060 Phyllis Drive, Cypress, CA 90603. About the Role Mission-critical hardware starts with world-class layout, and that’s where you come in. As a Layout Engineer I, you will help transform high-frequency circuit designs into reliable, production-ready hardware that supports advanced RF and microwave systems used in aerospace, defense, and satellite communications. Your work will directly influence the performance, reliability, and manufacturability of products deployed in some of the most demanding environments on the planet. In partnership with electrical, mechanical, and manufacturing engineers, you will create precision PCB layouts, apply RF design best practices, and ensure compliance with rigorous industry and military standards. From concept through qualification and high-rate production, you’ll be a key contributor to the entire product lifecycle. What You’ll Do • Create detailed schematics and PCB layouts in Altium (or equivalent)., • Build and maintain library entries for schematic symbols and component footprints., • Review and interpret datasheets, technical documentation, and manufacturer guidelines., • Generate accurate Bills of Materials (BOMs)., • Complete design checklists and produce clear, compliant technical documentation., • Troubleshoot and resolve layout-related issues, ensuring optimized signal integrity and RF performance., • Develop reliable technical solutions and approaches for complex layout and assembly challenges., • Support quality, repeatability, and manufacturability for products moving into and through production., • Collaborate with cross-functional teams including mechanical, electrical, and software engineering., • Communicate directly with PCB/PCBA/CCA manufacturers and review externally produced work., • Perform peer reviews and validate the work of internal or outsourced layout resources., • 3+ years of direct experience in RF electronic hardware layout and design., • Hands-on knowledge of RF layout best practices, manufacturing methods, and test principles., • Proficiency with Altium Designer or an equivalent CAD tool., • Working knowledge of IPC-610, MIL-STD-883, MIL-STD-750, MIL-STD-1580, and relevant ISO/AS requirements., • Strong Windows and Microsoft Office proficiency., • Excellent communication skills—verbal, written, and cross-functional., • Self-motivated, detail-oriented, and comfortable in a fast-paced environment., • Bachelor’s degree in Engineering, Computer Science, or a related technical field., • 3+ years of relevant industry experience., • CID, CIS, or CSE certification(s) preferred. Mission Microwave is proud to be an Equal Opportunity Employer. We are committed to treating all employees and applicants with respect and dignity, and to maintaining a workplace free from unlawful discrimination and harassment. All qualified applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or any other characteristic protected by federal, state, or local laws. Mission Microwave maintains a drug-free workplace and conducts pre-employment background checks and, where permitted by law, substance-abuse testing. Many of our roles support U.S. Government programs and require the ability to obtain and maintain a security clearance. Security clearances may only be granted to U.S. citizens. Applicants who receive a conditional offer may be subject to government security investigations and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that Mission Microwave may share your application materials, including your resume and any related personal information or documentation, with its subsidiaries or affiliated partners strictly for the purpose of evaluating you for current or future employment opportunities.

Job Description Scientific Applications & Research Associates, Inc. (SARA) is a world-class Defense Research and Development enterprise, with a charter to create new technology in support of Commercial & Government organizations. We have expertise in RF, EMP, Pulsed Power, Acoustics and Threat Warning Systems, and we prioritize partnering with our customers to address real-world problems with cost-effective solutions…that work. SARA’s Artificial Perception & Threat Awareness (APTA) division in Cypress, CA is looking for an exceptionally talented, motivated, and creative FPGA Design Engineer to push the limits of edge processing on projects that address drone autonomy and safety, RF and acoustic sensors on moving platforms, and directed energy (RF or laser) diagnostic systems. As part of APTA, you will contribute across the entire program lifecycle, supporting activities in initial research and development (R&D), product development, and field testing. Working alongside the best in the industry, you will develop advanced system architectures within SoM paradigms, implement novel machine learning approaches in fabric, and develop automated test capabilities. You will have the opportunity to grow and learn with other talented software developers, engineers, physicists, and technicians on varied programs supporting government agencies, their contractors, and commercial entities. You will have the freedom to exercise your initiative, adaptability, drive, and of course, programming skills in a fast-paced, highly technical environment. Core Responsibilities: • Technically lead a small team to develop a state-of-the art, embedded RF application, • Develop advanced FPGA-based systems for edge processing Requirements: • Bachelor’s degree in Electrical Engineering or Computer Engineering, • 5+ years of relevant experience, • Ability to conceive a system with all components and their relations, • Experience in FPGA firmware development languages/tools including VHDL, Verilog and Vivado, • Familiarity with XILINX products including the Zynq 7000 series SOM, • Experience testing RF circuits and systems, • Knowledge and experience in software engineering practices, configuration management, software unit and regression testing, software documentation practices, • Ability to lead a small team of multidisciplinary engineers, • Demonstrated written/oral communication skills and organization of thought, • Motivated self-starter, able to complete projects with minimal supervision, • May require light physical effort, involving standing, sitting and use of hands while performing duties, carrying or lifting up to 50 pounds, • Working environment is indoor, moderately quiet, reasonably clean, well-lighted and well-ventilated; moderate physical hazards may exist, • U.S. citizenship with ability to obtain and maintain DoD security clearance Preferred Qualifications: • Master’s or higher degree in Electrical or Computer Engineering, • 8+ years of relevant experience, • Expertise in state-of-the-art Analog-to-Digital performance, • RF PCB design experience, • Experience in designing FPGA circuit boards and supporting hardware, • Working knowledge of EMI/EMC, • Ability to embed and validate new signal processing algorithms, • Familiarity with XILINX IP, • Experience with MatLab, LabView and/or Simulink, • Active DoD Secret or Top Secret security clearance SARA offers a competitive benefits package to include: • Medical, dental, vision, disability and life insurance; and other supplemental programs, • A generous PTO program (vacation, sick, holiday), • Tuition & certification reimbursement, • Flexible work schedules, • Discretionary Employee bonuses, • 401(k) match/profit sharing, • Employee Stock Ownership Plan (ESOP) Pay Range: Salary at SARA is determined by various factors, including but not limited to location, the individual’s particular combination of education, knowledge, skills, competencies, and experience, as well as contract-specific affordability and organizational requirements. The projected compensation range for this position is $100,000 to $145,000 (annualized USD). The estimate displayed represents the typical salary range for this position and is just one component of SARA’s total compensation package for employees. Positions are on-site, unless indicated otherwise. SARA is an equal employment opportunity employer.

Job Description Econolite® is an innovator of Intelligent Transportation System (ITS) solutions, products, and services. Our technology is helping save lives and making the Smart City a reality. If you want to be at the forefront of this intelligent technology revolution, we want to talk to you about being part of our team. Econolite is committed to employing the best talent that will make significant contributions to building a safer, connected world. Econolite’s ITS solutions ease traffic congestion, provide safer mobility, and improve quality of life. As the one-stop-shop leader for traffic management systems, sensor products, and services, Econolite is committed to the advancement of connected and autonomous vehicles, smart cities, and cybersecurity. The Senior Software Engineer in Test (SSET) will contribute to the overall effectiveness of Econolite’s test automation systems and infrastructure, supporting our market-leading traffic controller and detection products. This role within the Test and Support Engineering team focuses on developing and maintaining automated tests, tools, and frameworks in collaboration with other engineers. Candidates should have strong programming skills, hands-on experience with automation, and the ability to work across both Windows and embedded Linux environments. DUTIES: • Design, develop, and maintain automated tests and tools using C++, Python, Qt, and C#/.NET (Visual Studio)., • Support and enhance existing automation frameworks to validate traffic controller and detection products., • Develop comprehensive automated tests covering smoke, functional, integration, load, and regression testing for Web services, APIs, and embedded software features., • Build and refine automation and installation tools that are easy to use and maintain across engineering teams., • Contribute to the setup and maintenance of scalable continuous integration (CI) and deployment pipelines for test automation programs., • Debug and troubleshoot issues across Windows and embedded Linux systems, leveraging debugging tools and log analysis., • Effectively document and communicate testing activities, results, and recommendations in verbal and written forms., • Bachelor of Science in Computer Science or Engineering/Technology, or equivalent work experience, • Strong programming skills in C++, Python, and experience with Qt (signals/slots, UI design), • Familiarity with C#/.NET (Visual Studio) for maintaining or extending internal tools, • Experience with embedded Linux environments and test development for embedded systems, • Solid understanding of automation frameworks and test methodologies (smoke, regression, functional, integration), • Knowledge of networking concepts (TCP/IP, SNMP, REST APIs) and experience validating distributed systems, • Demonstrated advanced knowledge of web protocols, networking, and systems, • Knowledge of cybersecurity and security testing tools for evaluating applications and networks, • Familiarity with debugging tools and troubleshooting techniques across hardware/software layers, • Exposure to CI/CD pipelines and tools (e.g., Jenkins, GitHub Actions, or equivalent), • Strong analytical and problem-solving skills, along with the ability to work independently and as part of a cross-functional team, • Experience and knowledge of open-source automated functional testing tools is desirable, • Must be able to stand, walk, squat, and bend at the waist for extended periods of time, • Ability to occasionally lift up to 25 pounds (e.g., test equipment or hardware prototypes). All candidates who accept employment will be subject to a background investigation and drug screening. For applicable roles, candidates who accept employment will also be subject to a Motor Vehicle/Driving Record screening. COMPENSATION The base pay range for this full-time exempt position is $100,000.00 - $140,000.00 per year plus benefits. Pay ranges are determined by various factors, including role, experience, and location. The pay range displayed reflects the minimum and maximum target for new hire base pay rates for this position. Within the range, actual individual compensation is determined by various factors, including location, job-related skills, experience, and relevant education or training. BENEFITS This role is eligible for benefits: weekly pay, weekly PTO accrual, paid holidays. Various medical plans, dental, vision, flexible spending accounts, direct deposit. Basic life, LTD, 401k discretionary match. Other voluntary benefits include: identity theft protection. DISCLAIMER The above statements are intended to indicate the general nature and level of work performed by employees within this classification. They are not designed to contain or be interpreted as an exhaustive list of all duties, responsibilities, skills, and qualifications required of employees assigned to this job. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, marital status, lactation, ancestry/national origin, citizenship, age, disability, arrest and court records, military & veteran's status, Genetic Information & Testing, Family & Medical Leave, or any other classification protected by state or federal law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. An Equal Opportunity Employer - Non-Smoking Facility

Job Description Bosch Building Technologies – Systems Engineer - AV About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: As an AV Systems Engineer with Bosch, your main responsibilities will be to engineer and design AV solutions for our end users and to maximize the award of profitable contracts by leading estimating and bid technical activities. You will work closely with the Sales, Design, and Project Management team to ensure that our customers are provided with complete and accurate solutions. Ideal candidates will represent Bosch in a professional manner that aligns with our values of leadership mindset, people development, team, and client focused. A typical day could see you responding to an RFP, meeting with sales team members, working with service and project teams during installation, or working with clients to identify scope requirements. Responsibilities: • Engage end user gathering requirements and analyzing to provide design, and architectural recommendations as it relates to AV systems., • Develop pre-sale design documentation, including Estimates, Bill of Materials and Quotations, • Prepare drawings and wiring diagrams, based upon project plans and specifications, showing locations of devices, equipment, and wiring etc. for Audio Video projects., • Develops functional design, construction drawings, relay settings, and equipment specifications for protection, control, and communications equipment., • Preparing electrical construction documents for both building renovations and new construction projects., • Designing and applying low voltage systems, focused on AV components., • Responsible for all aspects of low voltage design within designated projects., • Conducts surveys to gather field data; prepares drawings, layouts, and other visual aids; prepares technical construction drawings. Reviews the development of designs for compliance with applicable codes, adopted engineering standards, and good engineering practices., • Deliver technical presentations to internal and external audiences as required as part of the design process., • Work in a close team environment with Sales, Project Management, and Installation Departments, • Work with CAD Drafters to produce installation and drawing packages., • Engineering sales support and review of the functionality and design of systems being proposed by account managers., • High School diploma or equivalent, • Technical 2 year degree or better and/or 3-5 years of Audio Visual design experience, • Experience engineering low voltage systems, preferably experience with AV., • Certification in 2 Audio Video platforms or equivalent documented experience, • Certification in 2 Video Management platforms or equivalent documented experience, • Knowledge of NEC Code and low voltage systems, • Proficiency with Microsoft Office and computerized business systems, • Proficiency with Bluebeam, • CTS Certified is considered an asset, • Compensation: $85,000 - $110,000 (DOE), • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: Limited Travel, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description BKF is a multi-service infrastructure consulting firm providing civil engineering and surveying services across California, the Pacific Northwest, and beyond. With offices throughout California and the Portland area, BKF has served transportation, water resources, land development, government, and federal clients for over 110 years. At BKF, you’ll find a unique opportunity to grow your career with intention. Our culture values professional autonomy, innovation, and meaningful collaboration across offices. We are proud to be recognized with the Great Place to Work certification for the second year in a row. We are seeking a Water Resources Civil Design Engineer to support planning and design efforts for a diverse range of development and infrastructure projects. This role offers hands-on exposure to technical design, multidisciplinary coordination, and project delivery while working closely with experienced engineers in a collaborative team environment. Proficiency in AutoCAD/Civil 3D and a California E.I.T. certification are strong assets, along with a proactive mindset and eagerness to learn. Responsibilities • Assist in the planning, design, and analysis of water resources projects, including drainage systems, stormwater management facilities, flood control improvements, and hydraulic infrastructure, • Prepare hydrology and hydraulic calculations and develop stormwater, drainage, and erosion control plans using standard engineering practices and software tools, • Develop water resources design drawings and technical exhibits using AutoCAD and/or Civil 3D in accordance with local agency standards, codes, and permitting requirements, • Support the preparation of water resources studies, technical memoranda, feasibility analyses, and planning documents for public and private sector projects, • Participate in internal design reviews and coordinate with senior engineers to incorporate technical feedback, agency comments, and constructability considerations, • Assist in the development of technical specifications, quantity takeoffs, and cost estimates to support project proposals and construction documentation, • Bachelor of Science in Civil Engineering or related field from an ABET-accredited curriculum, • EIT or FE certification preferred, • 2-3 years of experience in drainage and stormwater design, • Experience with AutoCAD and/or Civil 3D, • Familiarity with preparing documents, specifications, and design plans, • Strong verbal and written communication and collaboration skills, • Exposure to public agency standards and permitting processes, • Ability to apply standard engineering techniques and judgment to support project Physical Demands: Must be able to regularly talk, hear and operate a computer, keyboard and mouse and occasionally lift, pull/push and carry up to 20 pounds with accommodations. Work Conditions: Exposure to constant or intermittent sounds at a low or moderate level consistent with an office setting. Exposure to high-stress, fast-paced, deadline-oriented environment. Travel to other BKF locations and client sites may be required. Benefits • The typical base salary range for this position is $73,000.00 - $97,000.00, annualized depending upon skills, experience, education, and geographical location. This is a salary position paid biweekly., • Competitive salaries, end of year bonuses, profit sharing, and 401k., • BKF pays 100% of the premiums for medical, dental, and vision coverage and 50% for your dependents., • Generous vacation and sick time packages., • 8 Paid Holidays., • Flexible schedules., • Education reimbursement, Paid annual dues for professional and societal organizations. BKF Engineers does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and a specific solicitation for the position or other approved engagement request for the position with BKF Engineers, BKF Engineers reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited submittals are done at the risk of the recruiter. #LI-Hybrid

Job Description Title: Senior Systems Engineer (Lead) Department: Ground Systems FLSA Status: Exempt Location: Cypress, California Level: T3 Range: $105,600 - $158,400 Company Overview Comtech Telecommunications Corp. is a leading global technology company providing terrestrial and wireless network solutions, next-generation 9-1-1 emergency services, satellite and space communications technologies, and cloud-native capabilities to commercial and government customers around the world. Our unique culture of innovation and employee empowerment unleashes a relentless passion for customer success. With multiple facilities located in technology corridors throughout the United States and around the world, Comtech leverages our global presence, technology leadership, and decades of experience to create the world’s most innovative communications solutions. For more information, please visit . We’re seeking curious, growth-minded thinkers to help shape our vision, structures, and systems; playing a key role as we launch into our ambitious future. If you’re invigorated by our mission, values, and drive to change the world — we’d love to have you apply. Responsibilities: The Senior Systems Engineer will support design and development of new ground station architecture as well as providing support for antenna ground station operation and maintenance programs to ensure the operability of remotely located tracking stations. • Responsible for design, development, integration, test and operations and maintenance of both new and existing ground stations, • Proficient electrical/electronicsHW and system design and development experience in RF telemetry systems, • Design review preparation and presentation experiences with documented analysis / calculations to meet design requirements, • Experiences in drafting electrical and/or mechanical schematics using CAD (including Visio, AutoCAD, OrCAD, and other similar software), • Experiences in integration and test to sell off process including procedures and reports generation., • Proven problem solving and troubleshooting experiences involving multi layers of systems, • Excellent interpersonal skills with ability to team leading, interface with international customers and senior leadership, • Excellent communication and technical writing skills, • Must be flexible and able to handle occasional heavy workload, • Willing to learn and expand systems knowledge, • Experience with proposal activities and business development, • Exposure to Software language, such as C++ would be plus, • Must be willing to travel both domestically and internationally, some of which will include multiple-week trips, • 5+ years of experience in one or more areas of following: RF engineering, antenna, baseband handling, digital processing, control and monitor processing, and network and satellite communication The pay range reflects the expected base salary for this position. Final compensation will be based on role, level, skills, experience, and geographic location. Comtech Telecommunications Corp. is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability protected veteran status or other characteristics protected by law.

Job Description One Tech Engineering is searching for a Civil Engineer for a position located in Brea, California. The Civil Engineer will work on project teams to create designs for new projects, alterations and redevelopments on a variety of projects including power, process, corporate, healthcare, pipeline airports, institutional, industrial, manufacturing, government and military facilities. The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Civil Engineering or related degree from an ABET accredited program and a minimum of 3 years of civil engineering experience Local candidates preferred or open to relocation. This is not a remote position. Civil Engineer Responsibilities: • Perform civil design of projects from the conceptual phase through design completion., • Modify and review production drawings for a variety of projects including, but not limited to: power plants, process facilities, industrial facilities, healthcare facilities, airports, educational institutions, commercial, and governmental and military facilities., • Design civil components for project needs and requirements that are set forth by the project managers., • Applies strong knowledge of commonly used civil engineering/design concepts, principles, practices, codes, and procedures within the civil engineering services industry., • Research and compile project related data as required by the project managers., • Compiles studies and reports. Writes specifications., • Update drawings provided by senior engineers to verify corrections are made within multiple CAD related software., • Compiles information for client presentations, shop drawing review, and contract administration for the design of power, process, pipeline, industrial, healthcare, airports, educational institutions, commercial, and governmental and military facilities., • Performs field inspections, measurements or calculations for public and private clients., • Performs other duties as assigned, • Bachelor’s Degree in Civil Engineering or related degree from an ABET accredited program, and minimum 3 years of civil engineering experience, • Or a Bachelor’s Degree in Civil or related Engineering Technology from an ABET accredited program and successful completion of the Fundamentals of Engineering (FE) exam and minimum 3 years of civil engineering experience., • Or a Master’s Degree in Civil Engineering and min 2 years of civil engineering experience., • Strong knowledge of standard civil engineering techniques and procedures., • Excellent written and verbal communication skills., • Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills., • Proficient in Microsoft Office Suite., • Strong computer skills (e.g. AutoCAD, MicroStation, BIM (Revit), Civil 3D, PLS, PLS-CADD, RISA-3D, MathCADD), and/or hydraulic, hydrologic, pavement, civil analysis programs., • Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills., • Engineers in Training-EIT Certification is preferred.

Job Description cFive Solutions, Inc. (cFive) provides software that aids community supervision agencies in their mission to reduce recidivism, improve lives, and keep communities safe. cFive provides unique, data-driven solutions to government agencies, by enhancing their decision-making with simplified, powerful, and insightful software. Scope of Work This role is a Senior level Software Engineer/Developer that is well rounded with the willingness and desire to build applications and have a client facing role. You will be passionate about technology, learning new technology and methodologies with the ability to apply what you learn to solve our client’s challenges. This is an opportunity to be part of a dynamic team and to grow with a company that rewards hard work. You will provide hands-on software design and development expertise for multiple programming languages and system environments, collaborate with team members, project sponsors, and client personnel to devise practical solutions to problems. This is a remote opportunity. Responsibilities/Skills • Strong understanding of overall software delivery lifecycle and activities., • Design, develop and test web applications developed using Angular and Java., • Develop and code using microservices connecting to an MS SQL database,, • Experience working in an Agile working environment., • Ability to quickly learn and apply new technologies to every changing issues., • Knowledge and experience with JSON and object serialization., • Ability to write and present technical material in the form of client meetings, test pans, and reports, technical reports, and presentations., • Ability to thrive in a diverse team environment consisting of colleagues, project sponsors, and government clients., • Engineer world-class platform with an eye towards rapid iteration and creative problem solving., • Ensure quality and completeness of the product through unit, integration, and regression capabilities., • BS in Computer Science/Engineering from an accredited College/University., • Data/object modeling, data normalization, and data analysis plus large data base experience., • Experience in architecture and development using Microservices., • Knowledge of Linux and MS Windows environments., • Experience conducting and participating in design and code reviews., • 5-7 years Java Development Stack (J2EE, JSP, Spring, Hibernate, JSON)., • 5-7 years developing software following Object-Oriented Design methodologies., • 3-5 years in Agile development environment., • 3-5 years producing web services (REST, SOAP), • Public Safety Domain experience, • Android mobile software development, • NOSQL experience (MariaDB), • Oracle and SQL database script writing cFive offers eligible employees a comprehensive benefits package which includes: • Medical, dental and vision coverage, • Disability and Life insurance, • Paid time off and paid holidays cFive is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state or local law. Powered by JazzHR sAf6nau6Gw

Job Description About the Company Mission Microwave Technologies was founded in 2014 to revolutionize the next generation of Solid-State Power Amplifiers (SSPAs) and Block Upconverters (BUCs). We utilize advanced GaN transistors, unique power-combining technology, and innovative full-system designs to create the industry’s most efficient, lightweight, and compact high-power SSPAs. Our leadership team brings more than 100 years of combined experience delivering high-performance, high-reliability SSPAs to commercial, military, and space customers. In just 10 years, our rapid growth and industry-leading innovation have attracted private-equity ownership and national recognition. We’re proud to be ranked #23 on the Fortune Best Workplaces in Manufacturing & Production and certified as a Great Place to Work® since 2022. Mission Microwave’s headquarters are located at 6060 Phyllis Drive, Cypress, CA 90603. About the Role As an Embedded Software Engineer/Architect, you will design, develop, and optimize embedded software systems for SSPAs and BUCs that operate in ground-based, airborne, and space-based applications. You will be responsible for driving technical innovation in embedded software, implementing advanced control algorithms, and ensuring the delivery of cutting-edge software solutions that meet mission-critical requirements. You’ll collaborate closely with customers, program managers, RF engineers, mechanical engineers, and cross-functional teams to translate system requirements into scalable, high-performance embedded software. This role is ideal for someone who thrives on solving complex technical challenges while mentoring and inspiring engineering teams. What You’ll Do • Drive technical innovation in real-time embedded software, control algorithms, and system monitoring solutions for high-power RF applications., • Develop software architectures and technical specifications for ground-based, airborne, and space-qualified embedded systems., • Apply expert-level knowledge of embedded software design principles, real-time operating systems, and device driver development., • Design and optimize software for thermal management, power control, and fault detection in high-power RF amplifiers and systems., • Implement embedded software for power electronics control, including switching power supplies and DC-DC converters., • Ensure software designs meet EMI/EMC compliance, performance, reliability, and environmental requirements, including DO-178 and MIL-STD compliance., • Conduct software architecture reviews, risk assessments, and technical trade studies to ensure optimal embedded solutions., • Support prototype development, testing, and qualification activities for space and airborne systems., • Own embedded software development through the full lifecycle from concept to production., • Collaborate with customers and cross-functional teams to define embedded software requirements and system specifications., • Provide technical expertise for proposal development and customer presentations., • Ensure all embedded software designs comply with applicable industry standards, regulations, and customer requirements., • Support quality assurance activities, including software verification and validation testing., • Maintain software documentation standards and engineering change control processes., • Bachelor’s degree in Computer Engineering, Electrical Engineering, Computer Science, or related field., • 3+ years of experience in embedded software development and architecture., • Expert knowledge of Yocto Project and real-time operating systems (FreeRTOS, VxWorks, etc.)., • Extensive experience with embedded development tools, debuggers, and device driver development., • Proficiency in C/C++ programming and assembly language for embedded systems., • Knowledge of communication protocols (SPI, I2C, UART, Ethernet, CAN, Modbus)., • Experience with software for power electronics, control systems, and high-power RF applications., • Familiarity with aerospace, defense, or satellite communication software development., • Understanding of DO-178, MIL-STD-882, and space qualification processes for software., • Knowledge of digital predistortion (DPD), digital signal processing, and adaptive control techniques preferred., • Experience with AI, GPUs, FPGAs, and NPUs preferred., • Strong leadership and mentorship skills with the ability to guide and inspire engineering teams., • Excellent communication, presentation, and technical writing skills., • Ability to perform complex mathematical calculations including calculus, statistics, and probability theory., • Ability to thrive in a fast-paced, dynamic environment., • Active security clearance or ability to obtain clearance preferred. Mission Microwave is proud to be an Equal Opportunity Employer. We are committed to treating all employees and applicants with respect and dignity, and to maintaining a workplace free from unlawful discrimination and harassment. All qualified applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or any other characteristic protected by federal, state, or local laws. Mission Microwave maintains a drug-free workplace and conducts pre-employment background checks and, where permitted by law, substance-abuse testing. Many of our roles support U.S. Government programs and require the ability to obtain and maintain a security clearance. Security clearances may only be granted to U.S. citizens. Applicants who receive a conditional offer may be subject to government security investigations and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that Mission Microwave may share your application materials, including your resume and any related personal information or documentation, with its subsidiaries or affiliated partners strictly for the purpose of evaluating you for current or future employment opportunities.

Working at the cutting edge, we design and develop software for platforms, peripherals, applications and diagnostics — all with the most advanced technologies, tools, software engineering methodologies and the collaboration of internal and external partners. Senior Principal Security Software Engi

We are looking for a Staff Software Engineer with deep expertise in Java (primary), Spring Boot, and large-scale distributed systems. This role goes beyond hands-on engineering - you will play a key part in technical leadership, architectural direction, and shaping engineering best practices across

A top SF-based AI startup is looking for a strong senior software engineer to join their growing technology team. As a Software Engineer, you’ll work side-by-side with the founders and take ownership of critical infrastructure, architecture, and AI design decisions from day one.

Experience in software lifecycle phases: software architecture, system/software requirements analysis, design, implementation, verification testing, system integration, and post-delivery maintenance. Raytheon is seeking a highly motivated, experienced Senior Software Engineer to be an active partici

Bachelor’s degree in Electrical Engineering, Software Engineering, or Computer Science. You will work on mission-critical embedded software found in buildings, commercial spaces, and restaurants. This role involves the full software lifecycle: analysis, design, programming, testing, debugging, and

You will be a lead developer responsible for the development of new software products and enhancements to existing products. Develop and support software including applications, database integration, interfaces, and new functionality enhancements. Experience with Agile or Scrum software development

Minimum of ten (10) years of professional engineering experience utilizing integrated development environments and debugging tools to troubleshoot software implementation and ensure integrity of the software products. TSC has job opportunities across all phases of the engineering lifecycle, includin

Senior Software Engineer (Founding Engineer).

Software Engineer to verify embedded software in a collaborative small team with high visibility, growth within the larger business and both low/high voltage products. The Engineer will collaborate directly with design teams to conduct software testing and verification throughout the development lif

AST’s Senior Principal Software Engineer leads the development of multi-sensor guidance and navigation systems. Collaborate with SoC and FPGA engineers to define hardware/software partitioning and system interface layers. Master’s degree in Computer Engineering, Electrical Engineering, Computer

Ideal candidates will have extensive experience in software development, particularly in C# and.

Senior Software Engineer, iOS Mobile Application Developer San Diego, CA Description: Senior Software Engineer, iOS Mobile Application Developer Join as a Senior iOS Software Engineer, where you'll develop critical public safety applications used by first responders. Requirements include a degree in

The role contributes to testing, engineering, integration, and sustainment efforts by applying data strategies, governance, and secure AI/ML solutions across cloud and edge environments. Key Responsibilities Apply industry standards, data strategies, governance, data cataloging, and DataOps practice

About the Role: The Senior Software Engineer is a core technical leader responsible for owning and building critical product features for a fast growing, venture backed technology company operating at the intersection of fintech, trade compliance, and automation. This role focuses on designing and d

The Role: Senior Software Engineer As a Senior Software Engineer, you will play a key role in shaping core product and engineering decisions.

Position: Software Engineer Type: Contract Compensation: $80–$110/hour Location: Remote ; MPK if possible for those who want to be onsite Role Responsibilities Design, build, and maintain scalable web applications using React/TypeScript and Python. Develop AI-native applications , engineer prompts

Senior Software & Systems Engineer – Semiconductor Failure Analysis Tools Location: San Jose, CA Salary: $130,000 – $175,000 per year + bonus Employment Type: Full‑time Overview Step into a rare engineering role where advanced software development meets cutting‑edge semiconductor diagnostics

Employment Type: Full-time Location: San Francisco/New York City Salary: $200K – $240K Equity: Competitive Visa Sponsorship: Not available About the Role We are seeking a Senior Software Engineer with 3–7 years of experience to own a new, client-facing product line from 0 1. Requirements 3–7 y

NET C# programming with demonstrable passion for the technology Proven experience with Xamarin, Xamarin Forms, and/or MAUI for cross-platform mobile development Hands-on experience building and consuming JSON, XAML/XML, and RESTful Web Services Strong aptitude for user experience (UX) and user inter

We are seeking a Software Engineer III to join an onsite team in Redmond, focused on building and maintaining OpenXR-based XR applications. Qualifications Minimum Qualifications: 3+ years of professional software development experience (or equivalent). In this role, you will collaborate closely with

Software Engineer IV (Staff)/Platform Developer San Diego, CA Requirements This engineer will have a confidence in at least one software discipline (i. BS or MS Degree in Electrical Engineering, Computer Engineering, Computer Science, or scientific discipline with over 8 years of experience in at le