Standards jobs in Los Angeles, California - Page 9Create job alerts

Job DescriptionPosition Overview We are seeking an experienced Quality Inspector with a strong background in aerospace manufacturing to ensure all products meet customer, regulatory, and internal quality standards. The ideal candidate will be responsible for performing inspections, verifying documentation, and maintaining full traceability of precision components and assemblies in accordance with aerospace specifications and procedures. Key Responsibilities * Verify product and documentation compliance with engineering drawings, purchase orders, and inspection plans. * Perform receiving, in-process, and final inspections of aerospace parts and assemblies using calibrated tools and measuring equipment. * Conduct visual, dimensional, and weld inspections to ensure adherence to quality and customer specifications. * Execute fit, function, and proof load tests when required and document results accurately. * Review documentation for completeness, accuracy, and traceability in accordance with AS9100 and internal quality system requirements. * Generate and process nonconformance reports (NCRs) and assist in root cause and corrective action activities. * Maintain accurate inspection records in electronic systems and ensure data integrity throughout the process. * Support continuous improvement efforts by identifying opportunities to streamline inspection workflows and enhance quality performance. * Ensure all inspection activities comply with 6S, safety, and housekeeping standards to promote a clean and organized work environment. Qualifications * High school diploma or equivalent required; additional technical training or certifications (e.g., ASQ, NDT, or CMM) preferred. * 3+ years of experience in quality inspection within an aerospace or precision manufacturing environment. * Strong ability to read and interpret blueprints, engineering drawings, and GD&T (Geometric Dimensioning & Tolerancing). * Proficiency with standard inspection tools such as micrometers, calipers, height gauges, and comparators. * Familiarity with aerospace quality standards (AS9100, ISO 9001) and documentation control practices. * Basic computer skills and experience with quality management systems (e.g., ERP or Global Shop preferred). * Strong communication skills and the ability to collaborate across departments. Physical Requirements & Work Environment * Must be able to stand, walk, and use hands for extended periods during inspections. * Ability to lift up to 25 lbs as needed. * Work is performed in both office and manufacturing environments, with occasional exposure to noise, oil, and metal particulates. Compensation & Schedule * Competitive hourly wage commensurate with experience. * Full-time position with potential for overtime depending on production needs. * Comprehensive benefits including medical, dental, vision, and retirement plans.

Job Description About Mynaric USA With offices in Munich, Germany and Hawthorne, California, Mynaric produces optical fiber for the skies and, as a pioneer in laser communications, enables extremely fast and secure wireless data transmission between satellites, aircraft, drones, and the ground. The products are used by well-known international technology companies to build global communication networks. The emerging Internet over the clouds will connect the un- or under-connected 3 billion people, bring the Internet of Things to the most remote corners of the earth and make international communication more secure than ever. Position Summary We are seeking a skilled, hands-on Test Technician to perform and maintain environmental testing for our electronics products. You will work closely with test engineering, production, and test teams to ensure quality, reliability, and manufacturability. Success in this role is measured by accurate and efficient testing, proper documentation, and reliable operation of test equipment. Job Type: Hourly, Full-time Essential Duties and Responsibilities: • Responsible for setting up and operating vibe and thermal equipment (including equipment calibration/maintenance duties) and other related duties as required., • Set up, operate, and maintain environmental test equipment, including vibration tables, thermal chambers, and related equipment; perform routine calibration and maintenance., • Conduct functional, environmental, and reliability testing on electronic assemblies and finished products., • Identify test failures or equipment issues and assist in troubleshooting to support engineering and production teams., • Perform routine checks, maintenance, and reporting for test systems and support equipment., • Help ensure test throughput and scheduling targets are met while maintaining accuracy and quality standards., • Bachelor’s degree in engineering, Mechanical, Manufacturing or a related field preferred., • Demonstrated experience working in a highly adaptive and iterative environment. Experience in aerospace, semiconductor, or electronic test environments., • Excellent organizational skills and attention to detail., • Analytical and problem-solving skills., • Team player that has a service mentality and thrives in fast paced environments., • Ability to work independently and to reliably “get things done “, even in high-pressure situations., • Experience within a rapidly changing and growing environment., • Experience working with ERP, MRP, or MES systems., • This position has no supervisory responsibilities., • Prolong sitting or standing for long periods of time, bending, grasping, sitting, pulling, pushing, and crouching., • Must be willing to work extended hours and weekends as needed., • Must be able to lift a minimum of 25 lbs. unassisted., • Must be able to use tools such as microscopes, for long periods., • Medical, Dental, Vision, • Flexible Spending Account (FSA), • Disability Insurance/ Basic Life Insurance, • 401(k) with matching, • Paid Time Off, • Gym Pass, • A dynamic work environment, • A flexible work environment Essential Job Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience • 2–3 years of test or systems experience, preferably in electronics or environmental testing., • Experience with automation in testing or developing test fixtures., • Familiarity with ERP, MRP, or MES systems. Supervisory Responsibilities • Prolong sitting or standing for long periods of time, bending, grasping, sitting, pulling, pushing, and crouching., • Must be willing to work extended hours and weekends as needed., • Must be able to lift a minimum of 25 lbs. unassisted., • Medical, Dental, Vision, • Flexible Spending Account (FSA), • Disability Insurance/ Basic Life Insurance, • 401(k) with matching, • Paid Time Off, • Gym Pass, • A dynamic work environment

Provides direct acute inpatient dialysis (hemodialysis, peritoneal dialysis, apheresis) and charge nurses duties. The dialysis nursing responsibilities include in accordance with MD orders, hospital policy, CMS guidelines, monitor patients during dialysis, assess any emergent changes in condition and communicate with patient, primary RN, and MD. Standards of professional performance required include ethics, education/competency, quality practice, effective communication, leadership skills, collaboration, and evidence-based practice/research utilization. Charge nurse duties include, assessment of patient and staff needs, coordination of care delivery and patient flow, and serve as role model and resource. Supervise dialysis technicians and delegate appropriately. Identifies safety concerns and institutes measures to provide a safe environment for patient and staff. PIH Health is a nonprofit, regional healthcare network that serves approximately 3 million residents in the Los Angeles County, Orange County and San Gabriel Valley region. The fully integrated network is comprised of PIH Health Downey Hospital, PIH Health Good Samaritan Hospital, PIH Health Whittier Hospital, 37 outpatient medical office buildings, a multispecialty medical (physician) group, home healthcare services and hospice care, as well as heart, cancer, digestive health, orthopedics, women’s health, urgent care and emergency services. The organization is nationally recognized for excellence in patient care and patient experience, and the College of Healthcare Information Management Executives (CHIME) has identified PIH Health as one of the nation’s top hospital systems for best practices, cutting-edge advancements, quality of care and healthcare technology. For more information, visit PIHHealth.org or follow us on Facebook, Twitter, or Instagram. Required Skills • Leadership abilities, • Written and verbal communications, interpersonal competence, negotiation, and confrontation skills, • Organizational, prioritizing, and time management skills, • Basic computer skills, • Clinical education related to specialty, • Principles of patient/family teaching, • Knowledgeable and proficient in the use of healthcare technology within specialty area., • Current California RN license, • Current Basic Life Support certification from the American Heart Association, • CNN (Certified Nephrology Nurse) certification encouraged Salary 52.83-87.99 Shift Days Zip Code 90241

Job DescriptionPosition Overview We are seeking a skilled Centerless Grinder Operator to join our precision manufacturing team. This position is responsible for setting up and operating centerless grinding machines to produce high-quality, close-tolerance metal components. The ideal candidate has hands-on machining experience, strong mechanical aptitude, and a commitment to maintaining accuracy and safety in a fast-paced production environment. Key Responsibilities * Set up and operate Cincinnati #2 or similar centerless grinding machines to produce precision parts within specified tolerances. * Install and balance grinding and regulating wheels; adjust fixtures, tooling, and feeds to achieve required surface finish and dimensions. * Inspect and measure parts using micrometers, calipers, and other precision instruments to verify conformance to specifications. * Monitor machine performance, make necessary adjustments, and maintain production efficiency and quality standards. * Document production data, quality results, and machine maintenance records. * Maintain an organized and clean work area with all required tools, gages, and instructions readily available. * Participate in continuous improvement initiatives and assist in training junior operators or trainees as needed. * Follow all company safety policies and quality procedures throughout all phases of operation. Qualifications * High school diploma or equivalent required. * 3+ years of experience operating centerless grinders in a manufacturing or machining environment preferred. * Working knowledge of machine setup, tooling, and precision measuring equipment. * Basic understanding of mechanical drawings and production specifications. * Ability to perform basic arithmetic calculations related to part dimensions and tolerances. * Strong attention to detail and a commitment to producing quality parts. * Willingness to work as part of a team and assist with training when needed. * Bilingual (English/Spanish) a plus. Physical & Work Environment * Frequent standing, repetitive motion, and manual handling of parts throughout the shift. * Occasional lifting of up to 25–50 lbs. * Exposure to manufacturing noise, lubricants, and metal particles. * Must be comfortable working in a production setting where precision and safety are priorities.

Job DescriptionFor more than 30 years, SQA Services has been a leader in providing managed supplier quality services — including audits, assessments, corrective actions, inspections, remediation, and engineering — to manufacturers across all industries. We deliver services by deploying expert quality assurance professionals across the United States and in 90+ countries to support client and supplier sites on demand. We are seeking a highly detail-oriented Documentation Specialist to join our team and support a leading aerospace company specializing in flight deck window production. This is a full-time, 40-hour per week, 3–6-month contract with potential for extension. Key Responsibilities • Review manufacturing documentation (e.g., technical drawings, assembly instructions, material specs, quality reports, test data) for accuracy, completeness, and compliance with industry standards and customer requirements, • Ensure documentation adheres to AS9100, FAA, and customer-specific standards, • Work with engineering and quality teams to confirm alignment with production processes and regulatory guidelines, • Verify version control of manufacturing documents, ensuring the most current versions are used, • Perform other related tasks as assignedRequired Qualifications, • Technical knowledge as an inspector, documentation control reviewer, junior engineer, or related field (or a combination of relevant education and experience), • Understanding of aerospace manufacturing processes, materials, and standards (e.g., AS9100, ISO 9001, FAA regulations), • Knowledge of First Article Inspection (FAIs), • Proficiency in document management software and Microsoft Office (Excel, Word, PowerPoint), • 2+ years of experience in documentation control or manufacturing documentation review in aerospace or a similarly regulated industry, • Excellent attention to detail, with the ability to identify discrepancies in technical documents, • Strong written and verbal communication skills, • Ability to work in both office and manufacturing environmentsPreferred Qualifications, • Bachelor’s degree in engineering, quality assurance, or a related technical field (or equivalent experience), • 5+ years of documentation review, quality, or manufacturing support experience in aerospace or a similar industry, • Certification in AS9100 Internal Auditing or Quality Engineering (CQE), • Proficiency with ERP/document control systems (e.g., SAP, Windchill) #ZR We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Shift: 2nd Shift Schedule: Full-Time Position Summary We are seeking a dependable Machine Operator to support swage and strut operations in a manufacturing environment. This role is ideal for someone with hands-on machine operation experience who can read blueprints and follow detailed work instructions. The operator will be responsible for producing quality parts while meeting production and safety standards. Key Responsibilities * Operate swage and strut machinery according to work instructions and blueprints * Load and unload materials, fixtures, and tooling * Read and interpret blueprints, drawings, and job travelers * Monitor machine performance and make basic adjustments as required * Perform in-process inspections to ensure parts meet specifications * Maintain accurate production and quality documentation * Follow safety procedures and maintain a clean, organized work area * Communicate with leads or supervisors regarding issues or deviations Required Qualifications * Minimum 6 months to 1 year of experience as a machine operator in a manufacturing environment * Ability to read and understand blueprints and basic technical drawings * Familiarity with measuring tools such as calipers, micrometers, or gauges preferred * Basic mechanical aptitude and attention to detail * Ability to work independently and as part of a team Work Environment * Manufacturing shop floor * Standing for extended periods and lifting materials as required * Fast-paced production setting #ff-ov

Company Overview: Nikon AM Synergy Inc. is a cutting-edge provider of metal additive manufacturing (AM) solutions, specializing in the aerospace, defense (ultra-secure), and space industries. We focus on the manufacture and certification of production flight hardware, aiming to drive industry growth through the integration of AM technology. As a part of the Nikon Advanced Manufacturing Ecosystem, we leverage our engineering and manufacturing capabilities, alongside Nikon SLM Solutions and organic AM solutions, to push the boundaries of additive manufacturing in industry. Position Overview The Additive Manufacturing Technician will support the hands-on fabrication of additively manufactured flight hardware. Following established procedures, work instructions, and sequences of operations, the Additive Manufacturing Technician will operate, maintain, and monitor additive manufacturing machinery, and handle powder. Reports to: Senior Operations Manager Responsibilities: Ensure additive manufacturing processes meet or exceed internal, customer, and industry quality requirements. Perform a variety of duties pertaining to the machine set up, calibration, and maintenance of additive machines and supporting equipment. Build support removal. Safely handle powder within the additive production process. Participate in and/or lead problem-solving and continuous improvement opportunities. Maintain a clean and safe work environment, particularly regarding powder and chemical usage. Job Duties \n • Operate additive machines, such as: EOS M290, EOS M4K, SLM 280, SLM NXG and SLM500\n, • Perform setup, operation, and daily maintenance on additive manufacturing machines.\n, • Utilize precision measuring instruments such as calipers, micrometers, and dial indicators.\n, • Propose innovative technologies and ideas to enhance additive manufacturing solutions.\n, • Proficiently use hand, power, and pneumatic tools for various tasks.\n, • Handle powder, including sieving, sampling, loading, and cleaning.\n, • Conduct self-inspection of parts/components with keen attention to detail.\n, • Monitor builds according to a flexible schedule.\n, • Ensure traceability of all powder and parts.\n, • Document test procedures and results, suggesting improvements to manufacturing and engineering processes.\n, • Collaborate with cross-functional teams to develop manufacturing solutions and address issues.\n, • Uphold compliance with customer and industry quality standards and safety regulations related to powder handling.\n, • Proficiency with various pneumatic and hand tools.\n, • Knowledge of raw materials, production processes, quality control, and cost optimization techniques in additive manufacturing.\n, • Familiarity with machines and tools used in additive manufacturing operations, including EOS and SLM equipment.\n, • Ability to assess performance and implement improvements.\n, • Strong organizational skills for meticulous planning and prioritization.\n, • Excellent written and oral communication skills, including proficiency in MS SharePoint and MS Office.\n\n Experience / General Requirements PREFERRED: 2+ years of experience with Additive Manufacturing or similar manufacturing environment REQUIRED: Able to work flexible hours, according to the schedule of the machine builds REQUIRED: Compliant with the International Traffic in Arms Regulations (ITAR) which requires U.S. person status (ITAR defines "U.S. Person" as a U.S. Citizen or U.S. Permanent Resident REQUIRED: Obtain and maintain a security clearance. Work Environment and Safety Requirements The work environment characteristics described here are representative of those an employee encounter while performing the essential functions of the job. \n • Properly wear personal protective gear throughout the day, including gloves, hearing protection, eye protection, protective footwear, and respirators.\n, • Acquire proficiency in technical material related to additive manufacturing and machine maintenance.\n, • Maintain a stationary position for up to three hours as needed.\n, • Operate, prepare, inspect, manipulate, and position parts, tooling, and machinery effectively.\n, • Utilize digital applications on interfaces like tablets or smartphones proficiently.\n, • Occasionally ascend/descend ladders.\n, • Adjust shelving, access stacked powder canisters, and store tooling by positioning oneself (standing, kneeling, crouching, or crawling).\n, • Communicate with teammates and internal stakeholders regularly regarding daily updates, hazard concerns, questions, and issues.\n, • Detect non-conformances, conduct inspections of additively manufactured parts and machinery, assess the manufacturing process for flaws and failed builds, estimate powder quantities during filling, and adjust machines through GUI interfaces.\n, • Move, position, lift, and stack parts weighing up to 50 pounds on a daily basis.\n, • Regularly push carts, RUWAC vacuums, and other machinery throughout the facility.\n

Job DescriptionPosition Overview We are seeking an experienced Header Operator to join our precision manufacturing team. This position is responsible for setting up and operating multi-die progressive header machines used to produce high-strength fasteners and components to exact specifications. The ideal candidate has a strong mechanical aptitude, attention to detail, and a background in operating and maintaining multi-die header equipment in a production environment. Key Responsibilities * Set up and operate 4- or 5-die progressive header machines to manufacture precision parts according to engineering drawings and production requirements. * Read and interpret blueprints, manufacturing work orders, and process specifications to determine required tools, materials, and machine settings. * Install, align, and adjust tooling, dies, and attachments to ensure accurate and consistent part production. * Inspect parts during production using precision measuring instruments such as micrometers, calipers, and comparators. * Monitor machine operation, make necessary adjustments, and perform minor tooling rework or preventive maintenance as needed. * Maintain accurate production and quality records; enter data into tracking systems as required. * Train and assist junior operators or trainees on proper setup, operation, and safety procedures. * Support continuous improvement initiatives related to productivity, quality, and equipment performance. * Maintain a clean, organized, and safe work area at all times. Qualifications * High school diploma or equivalent required. * 4+ years of experience operating multi-die progressive headers in a precision manufacturing or aerospace environment preferred. * Strong knowledge of tooling setup, machine adjustments, and metal forming principles. * Ability to read and interpret blueprints, process sketches, and part specifications. * Skilled in the use of precision measuring instruments and statistical process control (SPC) methods. * Strong attention to detail, quality standards, and safety procedures. * Excellent problem-solving skills and mechanical troubleshooting ability. * Willingness to work collaboratively and assist in training others. Working Conditions * All Shifts open! * Frequent standing and manual handling of materials. * Work performed in a manufacturing environment with exposure to noise, lubricants, and metal particulates. * Requires use of personal protective equipment (PPE) and adherence to all safety policies. Compensation * Competitive hourly rate ranging from $35.00 to $60.00 per hour, depending on experience and qualifications. * Additional incentives or sign-on bonuses may be available for qualified candidates. * Comprehensive benefits package including health, dental, and vision coverage, 401(k), and paid time off.

Job DescriptionDescription: Position Summary: We are seeking an experienced CMM (Coordinate Measuring Machine) Operator to join our quality assurance team. The ideal candidate will hands-on experience operating and programming CMM equipment to ensure precision and compliance with engineering specifications. This role requires strong attention to detail, technical expertise, and a commitment to maintaining high-quality standards in a manufacturing environment. Requirements: Key Responsibilities: • Operate and program CMM machines (Mitutoyo) to inspect and measure parts according to engineering drawings and specifications., • Interpret blueprints, GD&T (Geometric Dimensioning and Tolerancing), DPD (Digital Product Definition) and technical documentation to perform accurate measurements., • Create and modify CMM programs using software such as MCOSMOS., • Perform first article inspections, in-process checks, and final inspections to ensure product quality., • Document inspection results and maintain accurate records in accordance with quality standards., • Troubleshoot measurement discrepancies and collaborate with engineering and production teams to resolve issues., • Maintain CMM equipment and ensure calibration compliance., • Experience: 3–5 years operating and programming CMM machines in a manufacturing or aerospace environment (preferred)., • Technical Knowledge: Proficient in GD&T, blueprint reading, and metrology principles., • Software: Experience with CMM programming software (MCOSMOS, equivalent)., • Strong analytical and problem-solving skills., • Ability to work independently and as part of a team., • High school diploma or equivalent required, • Experience with additional inspection tools (micrometers, calipers, height gauges)., • Familiarity with ISO 9001 and AS9100 standards., • Knowledge of CNC machining processes is a plus.

Job Description Position Summary The Saw Operator is responsible for safely setting up and operating industrial saw equipment to cut raw materials to specified lengths and dimensions in support of manufacturing and assembly operations. This role ensures materials are cut accurately, efficiently, and in accordance with engineering drawings, work orders, and HII quality and safety standards. Essential Duties and Responsibilities • Set up, operate, and monitor industrial saws (band saws, cold saws, or similar equipment) to cut metal materials such as steel, stainless steel, and aluminum per job requirements., • Review work orders, job travelers, cut lists, and basic drawings to determine correct material type, dimensions, and quantities., • Measure and verify material dimensions using tape measures, calipers, and other measuring devices to ensure accuracy., • Load and unload raw materials and finished pieces using forklifts, pallet jacks, cranes, or hoists as required., • Inspect cut materials for accuracy, quality, and surface condition; identify and report nonconforming material., • Label, identify, and stage cut materials to ensure traceability and proper flow to downstream operations., • Perform routine equipment checks and basic preventative maintenance, including blade changes, lubrication, and housekeeping., • Maintain a clean, organized, and safe work area in compliance with HII safety policies and OSHA regulations., • Follow all safety procedures and properly use required personal protective equipment (PPE)., • Communicate production status, equipment issues, or material shortages to supervisors and team members., • High school diploma or GED required., • Minimum 1–3 years of experience operating industrial saws or related manufacturing equipment., • Ability to accurately read a tape measure and perform basic mathematical calculations., • Ability to read and follow work instructions, job travelers, and basic blueprints., • Understanding of shop safety practices and safe material-handling procedures., • Experience cutting metal materials in a manufacturing or fabrication environment., • Forklift and/or overhead crane experience or certification., • Ability to stand, walk, bend, stoop, and reach for extended periods., • Ability to lift up to 40 lbs. independently; heavier items may require assistance or lifting devices. Salary Expectations: $19-$22/ HR. DOE We offer competitive compensation & benefits package: • Health insurance (Dental, Vision, & Life Insurance), • 401(k) HII headquartered in Chatsworth, California, U.S.A., is a leading supplier of integrated products, services and support to military forces, aviation and commercial industries, Government agencies and prime contractors worldwide. Focused on defense and commercial technology, the Company develops manufactures and supports a broad range of systems for over one hundred industries as well as mission critical and military sustainment requirements worldwide. We are extremely proud of the fact that our extensive design capabilities enable us to produce the most sophisticated units known to today's technology. Our corporate, engineering and manufacturing facilities, located in Chatsworth, CA and Forsyth, GA, encompass over 625,000 sq. feet. Our manufacturing facility is equipped with the latest state-of-the-art equipment such as CNC lathes and mills, computerized tube bending, and automatic press brake and programmable punch press, laser topography scanners, and other quality verification devices. HII has combined the greatest talent, skill, and equipment to best service our customers' demands. HII is an Equal Employment Opportunity Employer and strictly prohibits discrimination and harassment against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibits discrimination and harassment against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability (including physical, emotional, and mental health), or status as a protected veteran. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact (818) 998-1231x2200 for assistance.

Job Description Emerald Technologies has an exciting opportunity for seven Conformal Coat Operator I's to join its Brea, CA team! The Conformal Coat Operator I plays an important role in protecting and finishing printed circuit boards (PCBs) and electronic assemblies by applying specialized protective coatings. This entry‑level position is ideal for individuals looking to build hands‑on experience in electronics manufacturing, focusing on learning core coating processes, operating equipment safely, and maintaining strict quality and process standards under guided supervision. At Emerald Technologies each employee has a significant role in building innovative products for various industries. Come and work in a supportive, fun team atmosphere where the work is meaningful, and careers have no limits! Responsibilities of the Conformal Coat Operator I: • Prepare PCBs and electronic assemblies for coating by performing masking, cleaning, and fixture setup with precision., • Operate manual spray, dip, and basic automated coating equipment under established procedures and direction., • Support material preparation by mixing and handling conformal coating products according to documented instructions., • Conduct detailed visual inspections under UV lighting to verify coating coverage and identify defects., • Maintain clear, accurate production logs, quality records, and process documentation., • Adhere to all safety, ESD, and chemical‑handling protocols to ensure a controlled and compliant work environment., • Communicate defects, process deviations, or equipment issues promptly to the supervisor for resolution. Benefits of the Job: • Competitive medical, dental, and vision benefits, • Health Savings Account/Flexible Spending Account, • 401K and company matching with no vesting period, • PTO for rest and relaxation, • Gym reimbursement (through Anthem), • Employee Assistance Program, • A safe and inclusive work environment with team and management support, • Employee training and development, • Community service and philanthropic initiatives, • Employee appreciation and events, • Career advancement opportunities, • Employee Referral program, • Employee discounts Qualifications of the Conformal Coat Operator I: • High school diploma or equivalent required., • 0–1 year of experience in electronics manufacturing or a similar production environment preferred., • Ability to read, understand, and follow detailed work instructions and process documentation., • Strong attention to detail with steady manual dexterity for handling small components., • Basic computer literacy and accurate data‑entry skills., • Willingness to learn and adhere to established manufacturing standards and industry guidelines, including IPC‑A‑610 and J‑STD‑001. Emerald Technologies is an electronics manufacturing services (EMS) provider for original equipment manufacturer (OEM) customers, focusing on high-reliability electronic assemblies. With design and manufacturing facilities in California, Michigan, New Hampshire, Oregon as well as in China and Malaysia. Emerald Technologies specializes in high mix, low- to medium-volume manufacturing for high-reliability markets in the Aerospace/Defense, Life Sciences, Renewable Energy, Industrial Controls, Power & Infrastructure, Semiconductor and Telecommunications sectors. However, our rapid turnaround times, responsive customer service, and collaborative problem-solving approach distinguishes us from the competition. At Emerald Technologies, we are committed to fully understanding and meeting the needs of our customers through quality excellence, advanced engineering, and a solid commitment to customer relationships. Emerald Technologies, is an equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Schedule & Budgeted Hours Morning Shift (2 Shifts Total) Shift Hours: Monday–Friday, 6:00 AM – 2:30 PM Paid Hours Per Day: 8 hours (includes one 30‑minute unpaid meal break). Overtime: May be required based on production needs and will be compensated in accordance with California labor law. Second Shift (5 Shifts Total) Shift Hours: Monday–Friday, 2:30 PM – 11:00 PM Paid Hours Per Day: 8 hours (includes one 30‑minute unpaid meal break). Overtime: May be required based on production needs and will be compensated in accordance with California labor law Breaks Meal Break (First Shift): One 30‑minute unpaid meal break, typically scheduled around 10:30 AM – 11:00 AM. Meal Break (Second Shift): One 30‑minute unpaid meal break, typically scheduled between 6:30 PM – 7:00 PM. Rest Breaks: Two paid 10‑minute rest breaks per shift, in compliance with California labor law. Budgeted Hours Budgeted Weekly Hours: 40 hours (5 shifts × 8 hours). Overtime: May be required based on production needs and will be compensated in accordance with California labor law.

The Pastry Cook plays a key role in preparing and producing a wide variety of pastries and baked goods to the highest standards of consistency, quality, flavor, and freshness.This position supports the bakery’s commitment to excellence by ensuring all items meet company standards for taste, pr

Doctor of Medicine | Family Practice Location: El Monte, CA Employer: The Inline Group Pay: Competitive weekly pay (inquire for details) Start Date: ASAP About the Position Asian Pacific Health Care Venture, Inc. - Full Time through Friday from 9 AM to 5:30 PM Employed New Graduates Welcome to Apply Average Patients seen: 19 - 22 PPD Call Schedule: On-call via cellphone Loan Repayment Sign-On Bonus: $10000 Compensation: - Starting Annual Salary of $260,000 to $270,000, Based on Experience - $10,000 Sign-On Bonus - Relocation Assistance up to $7,500 - Quarterly productivity bonuses available Benefits: - Full medical, dental, and vision coverage - Generous PTO plan - 12 paid holidays - 401(k) auto 2% - Employee Assistance Program - Life insurance, short-term disability, accident insurance - Commuter benefits discounts (Metrolink, Metro) - Public Loan Forgiveness Program - Continuing medical education - Discounted tickets to a variety of events and activities in the area through a partnership with the Tickets at Work Program Additional Info: Recognized for our excellent patient care on both the national and local levels, our multi-specialty healthcare system is looking for providers to join our established team! With over 35 years of experience caring for our wonderful communities, we believe we are a great opportunity to advance your career while taking advantage of a great city like Los Angeles! DETAILS: - Provide continuous, comprehensive primary care for infants, children, youth, and adults according to current standards of care - Make diagnoses and prescribe medication as necessary - Provide clinical direction to the Physician Assistant, Nurse Practitioner, RN, LPN, and Medical Assistant - EMR: NexGen

Doctor of Medicine | Radiology - General/Other Location: Long Beach, CA Employer: Wellhart, LLC Pay: Competitive weekly pay (inquire for details) Contract Duration: 36 Days Start Date: ASAP About the Position We are seeking a board-certified Radiologist for a 36-day locum tenens assignment in California, starting Feb 2, 2026. This role features day shifts from 8:00 AM to 6:00 PM and offers a balanced mix of MRI, CT, ultrasound, and plain film studies, with a focus on CT and plain films. Job Details Location: California Start Date: Feb 2, 2026 LOA: 36 days Provider Type Needed: Radiologist Schedule: Day shifts, 8:00 AM – 6:00 PM Responsibilities and Duties Interpret a balanced mix of MRI, CT, ultrasound, and plain film studies, with emphasis on CT and plain films Exclude nuclear medicine, cardiac, and breast imaging from caseload Collaborate effectively within a multidisciplinary team Ensure accurate and timely reading of imaging studies Adhere to best practices and quality standards in diagnostic radiology Additional Information Active, unrestricted California medical license required Board certification in Diagnostic Radiology required BLS or ACLS certification required DEA registration required Minimum 1 year of relevant experience preferred Benefits Strong compensation Travel-related expenses covered A-rated medical malpractice insurance provided Dedicated recruiter for future travel opportunities What are Locum Tenens Jobs? Locum tenens jobs, sometimes referred to as travel assignments, are contract positions that help meet patient care needs at various healthcare facilities and hospitals for a defined period. These roles can vary in length from a single week to over a year, often with options for extension. Medical professionals who undertake locum or travel work possess the same qualifications as permanent staff and frequently opt for these roles due to benefits such as competitive remuneration and greater scheduling flexibility.

Job DescriptionSUMMARY The Quality Inspector will evaluate product conformity by measuring or otherwise comparing product to customer requirements. ESSENTIAL DUTIES AND RESPONSIBILITIES • Perform visual and precision mechanical inspection of raw materials and finished products., • Able to use standard mechanical measuring tools (Calipers, Micrometers, Plug & Ring Gages, Gage blocks, Height gage, etc.), • Ability to read and interpret engineering drawings, standards and specifications., • Familiar with ANSI/ASME Y14.5., • Proficient shop math skills, including some trigonometry., • Ability to prepare and complete documentation such as inspection reports using Microsoft Excel., • Ability to prepare and complete FAIs per AS9102 requirements, • Good communication skills and ability to coordinate interdepartmental tasks., • Identify quality issues and recommend corrective actions, • Ability to prioritize multiple assignments and exercise independent judgment., • All other dues and responsibilities as assigned by Supervisor. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Proficiency in English and basic computer skills, including the use of the internet and Microsoft Office, • Strong understanding of quality control standards and procedures, • Read and interpret blueprints, • Attention to detail, • Ability to work independently and as part of a team EDUCATION and EXPERIENCE • High school diploma or general education degree (GED); Bachelor's degree preferred, • Certification in quality control or inspection (ASQ CQI) is a plus, • 2+ years of experience in mechanical inspection or quality assurance, • Knowledge of AS9100, ISO 9001:2015, Lean Manufacturing, Quality Management Systems, Root Cause Analysis is a plus, • One-year-related experience and/or training; or equivalent combination of education and experience. Work Schedule: Monday to Thursday 6am to 4:30pm. Job Posted by ApplicantPro

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Schedule This is a 3 - 4 x 11 rotating shift working alternating Wednesdays. Shifts Available • Sun - Wed 1st shift (5am - 4:30pm), • Sun - Wed 2nd shift (4pm - 3:30am), • Wed - Sat 1st shift (5am - 4:30pm) The Role • Conduct receiving, in-process, and final inspections to ensure conformance to the requirements., • Perform inspections utilizing engineering drawings, standard procedures, calibrated manual gages/tools, and various inspection methods., • Record and maintain accurate data including inspection results, non-conformance reports (NCRs), and other quality documentation., • Collaborate with cross-functional teams to resolve quality issues and implement corrective/preventive actions., • Create and maintain inspection files, interpret results, and produce complete, accurate inspection reports., • Assist Leadership with other various inspections and inspection-related tasks., • Keep the Metrology Lab clean, organized, and safe following 5S principles., • Use metrology Scanners, such FARO, Romer, Creaform C‑Track, MetraSCAN, GOM ScanBox, to acquire geometrical scan data., • Process raw scan data, remove noise, and export files using comprehensive 3D metrology software such as PolyWorks & Zeiss. Basic Qualifications • Ability to lawfully access information and technology that is subject to US export controls, • At minimum 1 to 2 year of experience in a Quality inspector role in an aerospace, automotive, or other relevant production environment, • High‑school diploma (required)., • Proficient computer literacy (Windows, Teams, Excel, etc.)., • Ability to read and understand engineering drawings, including knowledge of GD&T, • Ability to lift parts up to 50 lb and operate scanning arms for extended periods., • Strong verbal and written communication skills., • Team‑oriented mindset with high attention to detail., • Ability to analyze and solve complex problemsPreferred Qualifications, • Associate or higher degree in a technical field or equivalent work experience, • Background interfacing with Quality, Engineering, and Production teams, • Experience in regulated or high-performance manufacturing environmentsWork Environment, • Occasionally exposure to noise, machinery, welding, machining, hot surfaces, and airborne particles., • Requires frequent standing, walking, bending, reaching, and handling of precision tools and materials., • Must lift up to 40 lbs. independently and 50 lbs. with assistance., • May involve crouching, climbing, confined spaces, or work at heights., • PPE (including but not limited to safety glasses, hearing protection, gloves, respirators as needed) and company uniform are required., • TCH 02: $23.00 - $32.00/hour, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionCompany Description () is in North Orange County in the city of Brea, California. Life Science Outsourcing, Inc (LSO) is a contract manufacturer of medical devices with in-built capabilities to offer clients full-service solutions through our six divisions. Clients rely on LSO to perform all activities required to introduce their products to market, from sourcing to drop shipping. We are looking for a proactive and enthusiastic Receiving QC Inspector with a good positive energy to join our team. In this role you will be responsible for ensuring that all incoming medical devices meet the necessary quality standards and comply with all applicable regulations. We encourage you to submit a resume with salary requirements. Job Description • Perform incoming inspection of medical devices, including visual inspection and dimensional measurement, • Verify an document product compliance with regulatory and company requirements, • Identify and document non-conformance found during inspection, • Participate in investigations related to non-conformance or product quality issues, • Assist with the development and implementation of inspection procedures, • Maintain accurate and up-to-date records of inspection results, • Communicate effectively with team members, supervisors, and other departments as neededQualifications To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The requirements listed below are representative of knowledge, skill and or ability required. • High school diploma or equivalent, • Experience in quality control related field preferred, • Knowledge of medical devices regulations and standards preferred, • Ability to use measuring tools and equipment, • Detail-oriented with excellent organizational and communication skills, • Ability to work independently and as part of a team This position requires the ability to work on your feet for extended periods of time, as well as the ability to bend, stoop and lift objects. Walk extended distances as needed. Additional Information All your information will be kept confidential according to EEO guidelines.

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Job Summary We are seeking a Senior Manufacturing Engineer with a strong electronics background to support the production of avionics hardware used in both commercial and military aircraft. This role focuses on Circuit Card Assemblies (CCAs), electronic components, and box‑level assemblies, ensuring they are built efficiently, accurately, and to the highest quality standards. You will develop and improve manufacturing processes, create clear work instructions, support production teams, and collaborate closely with engineering, quality, and operations. This position is ideal for someone who enjoys hands‑on problem solving, process ownership, and working in a fast‑paced aerospace manufacturing environment. Essential Duties & Responsibilities Manufacturing & Process Engineering \n • Develop and optimize manufacturing processes for electronic assemblies, CCAs, and box builds.\n, • Create clear manufacturing work instructions that translate engineering drawings into simple, actionable steps for assemblers and technicians.\n, • Review engineering documentation (schematics, BOMs, drawings, ECOs) and ensure production alignment.\n, • Support prototype builds and transition new products into full‑rate production.\n, • Specify tooling, fixtures, and equipment needed for efficient assembly and testing.\n\n Production Support & Troubleshooting \n • Provide hands‑on support to resolve build issues on the production floor.\n, • Perform root‑cause analysis on failures and implement corrective actions.\n, • Collaborate with test technicians to troubleshoot electronic and functional test issues.\n, • Train operators and technicians on new processes, equipment, and product changes.\n\n Continuous Improvement \n • Identify and implement process improvements to reduce cost, improve yield, and enhance throughput.\n, • Analyze workflow, space utilization, and labor efficiency to support operational goals.\n, • Participate in Lean, Six Sigma, and TPM activities across the site.\n\n Cross‑Functional Collaboration \n • Work closely with design engineering to influence manufacturability and resolve technical issues.\n, • Support Quality Assurance to maintain high product yield and compliance.\n, • Assist Sales, Purchasing, and Program teams with technical information and production planning.\n\n Required Qualifications \n • 5+ years of experience in manufacturing engineering, preferably in aerospace, defense, or electronics manufacturing.\n, • Strong electronics background including troubleshooting, schematic interpretation, and understanding of CCAs and electronic assemblies.\n, • Experience developing manufacturing processes and writing work instructions.\n, • Proficiency with SolidWorks for tooling, fixture, or mechanical interface design.\n, • Knowledge of PCB design principles for high‑speed circuitry.\n, • Effective communication and teamwork skills with the ability to support production personnel.\n, • Bachelor's degree in engineering (Electrical, Manufacturing, Mechanical, or related).\n, • U.S. Person status required due to ITAR regulations.\n\n Preferred Qualifications \n • Experience with Altium Designer or similar PCB design tools.\n, • Lean/Six Sigma training or certification.\n, • Familiarity with Industry 4.0 concepts and digital manufacturing tools.\n, • Understanding of configuration management in a regulated environment.\n\n Salary Range: $77,900.00-$103,800.000 Pay Transparency The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne conducts background checks on qualified applicants who receive a conditional offer of employment in accordance with applicable laws, regulations and ordinances. Background checks may include, but are not limited to, education verification, employment history and verification, criminal convictions, Motor Vehicle Report (MVR & driving history), reference check, credit checks/credit history and drug testing. All qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Job Description Job Summary: The Punch Prep Technician for Essel is responsible for preparing and setting up equipment and materials for the punch press operation and performing fire caulking tasks. This role involves ensuring all components are accurately prepared to meet production standards, maintaining equipment, performing fire caulking to ensure fire safety compliance, and adhering to safety protocols. Key Responsibilities: • Setup and Preparation:, • Prepare and set up punch press machines according to production requirements., • Load materials into machines and ensure proper alignment and calibration., • Perform pre-operation inspections to verify that equipment is functioning correctly., • Fire Caulking:, • Apply fire-resistant caulking to designated areas to maintain fire barriers and prevent the spread of fire., • Ensure that caulking materials meet fire safety codes and standards., • Inspect and repair existing caulking to maintain effective fire resistance., • Maintenance and Troubleshooting:, • Conduct routine maintenance and cleaning of punch press machines., • Troubleshoot and resolve minor issues with equipment and materials., • Report major malfunctions or equipment failures to the maintenance team., • Quality Control:, • Inspect materials and finished products to ensure they meet quality standards., • Make adjustments to machine settings as needed to achieve desired results., • Document and report any discrepancies or quality issues to the supervisor., • Safety and Compliance:, • Follow all safety protocols and guidelines to ensure a safe working environment., • Wear appropriate personal protective equipment (PPE) and adhere to safety regulations., • Maintain a clean and organized work area., • Ensure fire caulking tasks comply with relevant fire safety codes and regulations. Qualifications: • High school diploma or equivalent; technical certification or relevant training is a plus., • Previous experience working with punch press machines or in a manufacturing environment is preferred., • Experience with fire caulking or knowledge of fire safety codes is highly desirable., • Basic understanding of mechanical systems and machine operation., • Ability to read and interpret technical manuals and blueprints., • Strong attention to detail and problem-solving skills., • Ability to work independently and as part of a team., • Good manual dexterity and hand-eye coordination., • Excellent organizational and time management skills., • Ability to lift and move materials weighing up to [specific weight, e.g., 50 pounds]., • Standing for extended periods and performing repetitive tasks., • Manual dexterity and the ability to operate machinery.

Job Description Location: Shine Foods, Inc. (Sister company of Jessie Lord Bakery) Job Summary: The position is responsible for performing various duties to ensure overall safe and proper operation of various machinery in packaging area, maintaining all safety and quality process, adjusting the machines to optimum settings, obtaining minimal downtime, fewest rejects with efficient output and product switchovers. Essential Job Functions: • Ability to set up, operate, monitor, and troubleshoot on assigned machines., • Ensure a great level of attention to detail and safety standards., • Ensuring machine-specific functions, such as configuring the equipment, loading, and operating the machines, and optimizing the machine capability., • Ascertain that the machine works at its full capacity, oversee the basic maintenance, and they are responsible for the product quality., • Set up machines (calibration, cleaning etc.) to start a production cycle and control and adjust machine settings (e.g. speed)., • Constantly feed raw material (film or cartons) into packaging machinery throughout shift., • Continually monitor machine operation to ensure accurate product measurements are maintained., • Communicate mechanical and operational issues to the maintenance team as they arise., • Make minor machine adjustments to maintain dimensional accuracy., • Maintain standard production rates, low waste and meet Shine requirements., • Complete all necessary documentation and reports., • Monitor raw material scrap levels to continuously decrease waste., • Assists in directing and training employees assigned to a specific area, looking out for safety, and adherence to GMPs, and communicates and delegates tasks to team members per Supervisor’s instructions., • Responsible for the quality and product that is produced within the shift in line with the companies’ quality systems, processes, and procedures., • Assemble/Disassemble machines for use or changeovers., • Interacts with maintenance on production equipment to troubleshoot or discuss preventative maintenance to prevent production downtime., • Must be able to read, understand, and adhere to daily production packaging schedule., • Must be able to read and understand product specifications established by Shine Foods and recognize deviations from those specifications., • Must be able to ensure proper printing of lot and/or case coding is being followed., • Performs clean-up activities as assigned., • All employees are required to immediately report and assist in the elimination or control of any food safety issues they observe to their supervisor, • Monitors and enforces cGMPs, • Occasionally carry and/or lift 50 Lbs. Pay range: $19.50 - $20.00 per hour Schedule: • 1st shift (7:30 a.m. - 4:00 p.m.) Job Type: Full-time

Job Description Position: Sanitarian Department: Sanitation Reports To: Team Lead Salary Type: Non-Exempt Location: Irwindale, CA Pay: $20.50 an hour Make a greater impact at Bonduelle Americas! Bonduelle Americas is a certified B Corp inviting people to embrace a flexitarian lifestyle with an expanding portfolio of plant-rich products available in and beyond the produce aisle. We operate four facilities and employ nearly 3,000 Associates in the US. Bonduelle Americas is a wholly-owned subsidiary of Groupe Bonduelle (BON.PA), an established global brand with more than 170 years of family heritage bringing the joy of plants to tables around the world. Globally, our ready-to-eat plant-rich food products are grown on 173,000 acres by our grower partners and marketed in nearly 100 countries. Our mission is to inspire the transition toward a plant-rich diet to contribute to people's well-being and planet health. Join us at Bonduelle Americas for an opportunity to advance your career in a culture that places people first. As a valued member of our company, you will work in a mission-driven environment aimed at preserving the planet’s resources while providing healthy plant-based products to millions of consumers around the world. Position Summary: This role is a key position within our manufacturing plants and supports our production team leads as they drive production to the highest safety, quality and efficiency standards. This position is exposed to multiple refrigerated areas within production. This position works directly with an experienced Sanitarian (Level 2) to ensure the proper sanitation of production equipment and areas. Key Responsibilities: • Follow all GMP procedures., • Follow all Food Safety, Food Quality and Food Security Policies., • Report any equipment failure to the Sanitation Manager/Supervisor., • Set up and tear down production equipment as needed to perform specific cleaning applications., • Use chemicals to clean and sanitize food contact and non-food contact surfaces., • Inspect all equipment after releasing the line to the Sanitation Manager / Supervisor for inspection., • Responsible for documentation of job tasks performed on sanitation checklist., • Must wear protective equipment and follow all safety procedures (PPE’S)., • Use basic cleaning hands tools to ensure proper and safe cleaning of conveyor belts, floors/walls, trashdock, and other areas of the facility., • Must be able to lift up to 50 pounds frequently., • Must be able to perform tasks under strict time limits., • Willingness to work in a cold environment, • Able to work flexible schedule, • Ability to work in a fast paced environment, • Ability to work independently and in a team environment., • Ability to multitask While performing the duties of this job, this position entails use of ladders and catwalks to reach production equipment, regularly works near moving mechanical parts and is regularly exposed to extreme cold for extended periods of time. The associate frequently works in high, precarious places. The associate is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, toxic or caustic chemicals, and risk of electrical shock. The noise level in the work environment is usually loud.

Job Description About Mynaric USA Mynaric USA, a wholly owned subsidiary of Mynaric AG (HQ Germany), is the leading supplier of laser communication products for communication networks, with a specific focus on space, aviation, and terrestrial applications for commercial and government customers globally. Our business is rapidly expanding, and we require motivated Customer Support Integration engineers to closely coordinate with our business development and sales teams to help us capture new business. Based in Hawthorne, California, we are expanding our team with key strategic hires, to help focus on our go-to-market objectives in the U.S. Our key markets range from the space/satellite market represented by constellations of various sizes to ground-to-air and air-to-air Laser Communication platforms. Position Overview The Quality Inspector is responsible for ensuring that all incoming materials, in-process components, and finished products meet established mechanical and manufacturing specifications. This role requires strong technical proficiency, hands-on inspection experience, and the ability to identify, analyze, and document nonconformities in a fast-paced industrial environment. The Quality Inspector will perform mechanical inspections using precision measurement tools, support root-cause investigations, and contribute to continuous improvement initiatives. Candidates should bring three to five years of experience in industrial manufacturing—preferably in serial or mass production—and a solid understanding of quality standards, inspection methods, and mechanical concepts. This position works closely with Engineering, Production, and Quality teams to maintain product integrity and ensure compliance with customer and regulatory requirements. Key Responsibilities • Conduct quality monitoring and inspection of incoming materials, semi-finished products, and final products to ensure compliance with specifications., • Develop, maintain, and continuously improve a reliable inspection strategy based on specific requirements and statistical test cycles., • Investigate the root causes of defects and recommend corrective and preventive actions to address quality issues., • Utilize standard quality tools—including Cause and Effect Diagrams, Pareto analysis, 8D reports, and audit methodologies—as part of daily activities., • Maintain accurate and current acceptance, rejection, and certification records in accordance with applicable specifications., • Determine acceptance or rejection of parts after inspection and/or calibration, identifying defective conditions and documenting all findings, including calibration history., • Interpret, evaluate, and document inspection results following approved procedures and quality standards., • Observe all safety rules, regulations, and maintain a FOD-free work environment., • Perform semi-complex inspections on machined components using a wide range of precision measuring instruments to assess part quality and finish., • Adapt and develop inspection setups to evaluate sample parts effectively., • Conduct first article inspections, envelope inspections, source inspections, and semi-complex surface plate setups., • Identify causes of defective conditions and test failures, generating appropriate documentation and reports., • Investigate customer return failures to determine root cause and support corrective action., • Diagnose, calibrate, and validate newly acquired inspection equipment., • Three to five years of hands-on experience as a Quality Inspector or similar role within an industrial manufacturing environment; experience in serial or mass production preferred., • Strong mechanical aptitude with the ability to interpret mechanical drawings, engineering specifications, GD&T, and technical documentation., • Solid understanding of common quality tools and methodologies, including 5 Whys, Ishikawa diagrams, Pareto analysis, 8D, and root-cause problem-solving techniques., • Experience conducting first article inspections, in-process inspections, receiving inspections, and final inspections., • Familiarity with statistical sampling plans and inspection strategies based on specific or statistical test cycles., • Ability to identify nonconformities, determine acceptance/rejection criteria, and document findings in accordance with quality procedures., • Experience working within ISO 9001, AS9100, or similar quality management systems., • Competence in completing and maintaining accurate records, inspection reports, and traceable documentation., • Ability to diagnose quality issues, analyze causes of defects, and support corrective/preventive action processes., • Basic understanding of calibration practices, equipment verification, and metrology principles., • Strong computer skills, including experience with inspection software, ERP/MRP systems, MS Office, and digital documentation tools., • High attention to detail, strong analytical skills, and the ability to work independently in a fast-paced production environment., • Ability to communicate effectively with Engineering, Production, Quality, and Supplier teams., • Available to work extended hours when needed based on-site operational needs; flexibility required, • Work performed in an environment requiring exposure to fumes, odors, flashing lights, heat, cold, rain, and noise, • Health, vision, and dental insurance, • A 401k program with matching, • A dynamic work environment, • The capability to grow your career with the growth of the company, • A flexible work environment

Job DescriptionDescription: Signia Aerospace is a global, integrated provider of high-performance systems and specialized components for the aerospace industry. Signia currently operates two complementary business segments: Thermal Management (key brands include ACE Thermal Systems and Mezzo Technologies) and Mission Systems (key brands include Onboard Systems, Lifesaving Systems, and Meeker Aviation). The Signia brands are leaders in their respective markets and provide a compelling value proposition to both aerospace and defense OEMs and end-users. Onboard Systems Hoist & Winch, located in Anaheim, CA is one of the world’s leading providers of Search & Rescue (SAR) and Human External Cargo (HEC) advanced mission equipment for civil, commercial, and military helicopters. Position Overview This is a union position covered under a collective bargaining agreement. Starting pay is $27.50 per hour (swing shift) per the union contract. The ability to pass a pre-employment background check and an FAA-regulated drug test is required. Location: Anaheim, CA (Onsite) Shift: Monday-Friday 2:30pm – 11:00pm The Test Technician will be responsible for performing functional and performance testing of helicopter hoists and cargo winches, ensuring conformance to blueprint specifications and adherence to quality standards. In this role, you will utilize hand tools and equipment for test adjustments, inspect parts and products for quality, and maintain a safe and organized work environment. What You’ll Do • Perform functional and performance testing on helicopter hoists and cargo winches in accordance with blueprint specifications and established quality standards., • Utilize hand tools and equipment to perform necessary adjustments during test operations., • Acquire the necessary skills, knowledge, and certifications to effectively perform job duties., • Inspect parts and completed products to identify and resolve any quality defects., • Ensure compliance with applicable quality systems, environmental health, and safety requirements., • Maintain tools, materials, and the work area in a clean and organized condition., • This position requires the ability to communicate in English, both verbally and in writing, to complete inspection reports and understand safety and quality standards., • High School Diploma or GED, with a minimum of 1 year of Aerospace or Automotive industry experience. Graduation from an Aerospace or Automotive technical program can substitute for experience., • U.S. Person (U.S. citizen, permanent resident, or granted refugee or asylee status)., • Prior manufacturing experience is preferred., • Ability to interpret technical drawings and follow detailed test instructions. Requirements:

Job DescriptionDescription: The Machinist – Milling Specialist supports aerospace manufacturing by operating CNC and manual milling equipment to produce high-precision components that meet strict FAA, AS9100, and customer-specific aerospace requirements. This role ensures accuracy, quality, and compliance with all industry standards while contributing to a safe and efficient production environment. Requirements: Edit programs, set up, and operate complex CNC machines, including multi-axis mills and multi-tasking mill-turns (Mazak, WFL). • Work with ultra-precision tolerances (±.0005” or tighter) on complex aerospace components., • Select proper tooling, fixtures, cutting parameters, and machining strategies for aerospace components., • Perform tool offsets, adjustments, and changeovers to maintain precision within tight tolerances., • Inspect parts using calipers, micrometers, gauges, CMM data, and other aerospace-approved metrology tools., • Maintain documentation for AS9100 compliance, including traceability and production records., • Conduct routine preventative maintenance and ensure machines operate at optimal levels., • Identify machining issues and collaborate with engineering and quality teams to resolve discrepancies., • Maintain a clean, organized workspace aligned with 5S and continuous improvement practices., • Follow all safety procedures and regulations applicable to aerospace manufacturing. Requirements Qualifications Education & Experience: • High school diploma or GED required; technical training in machining preferred., • Minimum 2-4 years of milling or precision machining experience, preferably in aerospace manufacturing., • Experience in machine aerospace materials and working to AS9100 or FAA standards strongly preferred Skills & Competencies: • Strong knowledge of milling operations, tooling, feeds, and speeds., • Ability to read complex aerospace drawings and GD&T requirements., • Proficiency with precision measuring equipment and inspection documentation., • Strong attention to detail and commitment to producing flight-critical components., • Ability to work independently and collaborate across production, quality, and engineering teams. Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off

Job Description HOURLY JOB OPPORTUNITY FORM Position Custom Sample Tufting Operator A Department Custom Samples Reports To Manager Post Start Post End Shift Posting No. ESSENTIAL JOB DUTIES Set up and make adjustments to tufting machines and replace needles, loopers and knives. While machine is running, inspect carpet quality and defects such as breaks, pull-downs, low lines. Program patterns in computer. Splice in next order to specifications. Confirm pattern and machine set-up to specification. Record or make changes to setup from original specification when needed under direction of designer, lead or Manager for aesthetic or quality reasons. Identify sample with correct PDS#. Notify Spec coordinator when called for. Load yarns on creel or in yarn tubes as necessary. Interact with our Designers to make adjustments to the machine for quality and design approval. Housekeeping , Other duties needed to maintain department levels of production. EXPERIENCE OR REQUIREMENTS • Six months experience as a mender ., • 5 years experience as a Tufting Machine Operator or the equivalent experience on machines: #4 , #3 ,#25 , #20 , #32, #27, #41, #52, • Knowledge of carpet quality standards., • Communication skills to read, write, understand and discuss (in English), • Understand numerical and alphabetical lot numbers. Frequent: Handle, manual dexterity, lifts 15-20 lbs., reach, stand, stoop, and walk. Use personal protective equipment. Occasional: Balance, climb, crawl, crouch, grasp, hear, kneel, and speak. Required: Close vision, color and depth perception. ENVIRONMENTAL CONDITIONS General warehouse environment. Background noise, dirt, oil, humidity, temperature variations. Work near moving mechanical parts Bentley Mills provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. *The “base salary range” provided above is a good faith estimate of what we expect to pay for this position. The range provided is required by California State Law. Bentley Mills reserves the right to pay outside of the given range based on a variety of factors including but not limited to: candidate skills and experience, complexity of the job, budgetary factors, and local/geography. Bentley Mills conducts regular reviews of compensation ranges and therefore reserves the right to alter this range at any given time.

Job DescriptionBased in Gardena with several other facilities in Southern California, we are a TOP Ranked Aerospace Manufacturing Company. Our core values are centered around our people and our clients. We believe that putting your employees first is not only the right thing to do, but it also gives us the competitive edge to ensure our clients have an excellent experience! Over the years our reputation for providing our people with the very best has caught the eye of some reputable clients who have chosen to use us as primary partners. This includes, Raytheon, Airbus, GE, Sikorsky and many more! If you are an experienced Inspector, then please apply! Why join us? Do you want to work with some of the nation’s best Clients AND enjoy time at home w/ family? We do too! • Direct Hire Opportunity!, • Meaningful Work!, • Best in Class Company!, • Competitive Compensation Package!, • Complete Benefits Package!, • Accelerated Career Growth!, • Fun Company Activities!, • Many More!Key Responsibilities:, • Perform in-process and final inspections of aerospace parts, assemblies, and materials., • Verify compliance with engineering drawings, specifications, and industry standards (e.g., AS9100, ISO 9001)., • Use precision measuring instruments such as calipers, micrometers, height gauges, and CMMs., • Document inspection results and maintain accurate quality records., • Identify and report non-conformances; assist in root cause analysis and corrective actions., • Interpret technical drawings, blueprints, and work instructions., • Support internal and external audits as needed., • Ensure adherence to safety and quality procedures throughout the production process.Qualifications:, • High school diploma or GED required; technical certification or associate degree in a related field preferred., • Minimum 2–5 years of experience in quality inspection within the aerospace or defense industry., • Strong knowledge of GD&T (Geometric Dimensioning and Tolerancing)., • Familiarity with AS9100 and other aerospace quality standards., • Proficient in reading and interpreting engineering drawings and specifications., • Experience with inspection tools and software (e.g., CMM, SPC, ERP systems)., • Excellent attention to detail and documentation skills., • Ability to work independently and collaboratively in a fast-paced environment.

Job Description Position: Machine Operator (All Levels) Reports To: Department Team Lead Location: Irwindale, CA Pay: $18.50 - $22.50 Note: This range encompasses various levels of experience. Compensation will be determined based on the candidate's skills and experience, with the position level assessed during the interview process. Make a greater impact at Bonduelle Americas! Position Summary: The Machine Operator is a key role within our manufacturing plants, responsible for operating and maintaining critical equipment such as the sealing machine, Atlas Operator, ABL Operator, Past Operator, Clean Room Operator, T400, check weigher, metal detector, bagger, and label printer. This position plays a pivotal role in optimizing line efficiencies by increasing production, reducing rework, and minimizing downtime. Machine Operators support production team leads in driving operations to the highest safety, quality, and efficiency standards while adhering to the Company’s RCE philosophy. Working in a refrigerated production environment, this role requires versatility and exposure to multiple areas, ensuring all equipment runs correctly and efficiently. Additionally, Machine Operators are accountable for meeting productivity goals, maintaining product specifications, and championing maintenance and operational excellence. What you will Do: -Conduct pre-shift and post-shift inspections for quality, machine lubricant, sanitization, and proper equipment setup.Operate and maintain equipment such as sealers, baggers (Hayssen), Atlas Operator, ABL Operator, Past Operator, Clean Room Operator, and other production machinery. -Perform preventative maintenance, troubleshooting, and minor repairs to ensure efficient equipment operation. -Execute start-up and shutdown procedures, including setting up baggers and other equipment per specifications. -Validate product quality through visual checks for defects, size, color, and other specifications. Certify bags meet product and order requirements (air testing, seals, code dates, weight, nitrogen, volume, etc.). -Manage and reduce waste (e.g., product giveaway) by utilizing scale systems and optimizing efficiency. -Maintain uninterrupted production flow, manage changeovers, and minimize downtime. -Ensure compliance with GMP, PPE, SQF, HACCP, Sanitation, and safety guidelines and processes. -Maintain a clean and safe work environment, adhering to 5S methodology. -Lift and carry forming tubes and film rolls (up to 50 lbs) for equipment setup and adjustments. -Customize and monitor chemical mixtures to prevent spoilage and ensure compliance with food safety regulations. -Communicate effectively with team members to maintain production quality and flow. -Monitor and understand production KPIs (production rates, quality, safety) and support continuous improvement initiatives. -Work in a fast-paced, cold, and wet production environment while maintaining safety and efficiency. -Perform other duties as assigned. Minimum Qualifications: -Ability to read, write, and speak English; comprehension of basic math. -GED/High School Diploma. -Problem-solving skills and attention to detail. -Reliability and eagerness to learn. -Willingness and flexibility to work in a cold, wet, fast-paced, 24-hour plant environment. -Ability to work independently and as part of a team. -Ability to deliver consistent quality results with urgency and initiative. -Capability to be cross-trained and multitask in multiple positions. -At least 6 months of related experience or on-the-job training -Level III and Above: Minimum of 3 years of experience with mechanical systems, including a solid understanding of scale systems (e.g., Ishida and Yamato) and bagger equipment (e.g., Hayssen). -Knowledge of GMPs, safety guidelines, HACCP, and sanitation processes. -Basic computer skills. -Understanding of plant KPIs (production, quality, and safety). -Ability to assist in training others. -Flexible schedule and adaptability to a fast-paced environment. Physical Work Environment: -Demands: While performing the duties of this job, the associate will be required to perform repetitive movements (i.e., loading bowls into tray carrier). The associate regularly works near moving mechanical parts and is regularly exposed to extreme cold. The noise level in the work environment is usually loud. -Must be able to lift up to 50lbs. -Ability to sit or stand for extended periods. -Ability to move about within a fast paced environment in/outside facility, and traverse between maintenance shop & production floor. -Ability to ascend/descend on stairs/ladder for repairs -Ability to position self to stoop, kneel, crouch, or crawl -Ability to frequently move, push, or carry items up to 50lbs -Exposed to a cold & wet environment of 34 degrees. -Ability to work in outdoor weather conditions Must be able to exchange accurate information through frequent communications within all levels of the organization Must be able to detect, identify, inspect, observe, and assess surroundings

Job Description SUMMARY: Without the strength of our Fabrication team, we would not be able to offer the industry-leading service we’re known for. We’re seeking an experienced Press Break Operator Professional. The ideal candidate will have proven industry experience as a Press Break Operator. As a strong communicator and skilled hands-on Press Break Operator, you will adhere to procedures and policies in support of the Quality Policy and Customer satisfaction. Support fabrication personnel by performing general fabrication duties to meet or exceed the company’s quality standards. Efficiently manage time, equipment and resources in order to support first time quality and on time delivery. The Press Brake Operator must be able to explain the respective role within the QMS and how their role contributes to quality (Ref. Quality Procedures). The Press Brake Operator shall contribute to product conformity as apart to their daily job function and shall contribute to product safety (Ref. job travelers and the Injury and Illness Prevention Program Handbook). The Press Brake Operator shall also be aware of ethical behavior and conduct themselves accordingly to Karman’s policies and procedures KARMAN SPACE & DEFENSE: Karman is the market leading suppliers of metallic and composite flight hardware and sub-assemblies for the space, missile, and hypersonic markets. Karman offers an unprecedented capability set to customers, creating a supply chain solution in a historically fragmented supply base. The Karman team draws on in-house expertise in engineering & design, precision machining, large part forming, welding, heat age, finishing, assembly, ablative & insulative composites, and other capabilities to serve as a strategic partner to customers. Karman is headquartered in greater Los Angeles and currently has 5 locations in Southern California and 1 location in Mukilteo, Washington. Location: South El Monte, CA Compensation & Benefits: • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* ESSENTIAL DUTIES & RESPONSIBILITIES • Set up, adjust, and operate press brake machines to perform precision sheet metal forming., • Interpret blueprints, work orders, and engineering drawings to determine material specifications, bend sequence, and tooling requirements., • Select and install correct tooling (dies, punches, back gauges) for each job., • Inspect parts using measuring tools such as calipers, protractors, micrometers, and contour gages to ensure conformance to specifications., • Perform first article inspections and complete required production documentation., • Monitor machine performance and adjust as needed to maintain part accuracy and quality., • Maintain cleanliness and organization of the work area in compliance with 5S and safety standards., • Report any equipment malfunctions, nonconforming material or safety issues to supervision immediately., • Work collaboratively with engineers, quality inspectors, and other operators to optimize production and minimize waste, • Maintain and Realize AS9100 procedures and continuous improvement efforts., • Maintain a clean and organized work environment., • Responsible for maintaining press brake tooling in good order and ready for use., • Responsible for maintaining press brakes in good order and ready for use., • Responsible for set-ups and tear down of tooling for production work., • Responsible for directing helpers in support of first-time quality and on-time delivery., • Must understand how customers’ products are impacted in the event of failure., • Any other duties as assigned. KNOWLEDGE AND SKILL REQUIREMENTS: • Must be detail oriented, extremely organized, have excellent communication skills and be able to interact well with all levels of Management., • Must have experience with Siemens 840D and Fanuc 31i – B5 Controls., • Must have excellent blueprint interpretation skills., • Must have thorough understanding of machine set-ups, tooling, and cutters., • Must have direct communication with internal customers., • Must be trained of applicable changes & customer requirements., • High school graduate of equivalent in work experience., • Thorough understanding of press brake equipment, tooling and operating procedures., • Must be detail oriented, extremely organized, good communications skills and able to interact with Management and staff., • Minimum 2 years of press brake operation experience in a manufacturing or aerospace environment preferred., • Strong knowledge of sheet metal fabrication processes and material characteristics (aluminum, stainless steel, titanium)., • Ability to read and interpret blueprints, GD&T symbols, and work instructions., • Experience using precision measuring tools and inspection equipment., • Basic mechanical aptitude and math skills., • Attention to detail and accuracy, • Commitment to safety and quality, • Teamwork and communication, • Problem-solving and continuous improvement mindset, • Must have excellent communication skills., • must have excellent blueprint interpretation skills., • Must be able to use inspection hand tools., • Must be able to lift 25 lbs., • Must have direct communication with internal customers., • Must be trained of applicable changes & customer requirements., • Must know the QMS basic system of reporting, record keeping and follow instructions. ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. TRAVEL REQUIREMENTS: No travel required for this position. PHYSICAL REQUIREMENTS: As a federal contractor, Karman Space & Defense is committed to compliance with all federal employment eligibility requirements. We participate in E-Verify, a web-based system that allows enrolled employers to confirm the eligibility of their employees to work in the United States. As an E-Verify employer, federal compliance mandates that we require documentation to verify your identity and employment authorization upon hire. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. Company Overview: At Relativity Space, we have two audacious goals: to build the next great commercial launch company with Terran R and to become America's leading force in additive manufacturing innovation. Both contribute to our long-term vision of creating humanity's industrial base on Mars, paving the way for interplanetary life to expand the possibilities of the human experience. This journey begins right here on Earth – where we design, build, and fly rockets to deliver customer payloads to orbit. Terran R, our medium-to-heavy lift reusable rocket, fulfills the growing demand for launch capacity, thanks to our iterative approach that accelerates design, testing, and development while minimizing costs. While our groundbreaking research and development in 3D printing pushes the boundaries of large-scale additive manufacturing. Your journey with us is more than just a job – it's an opportunity to shape the future of aerospace technology, additive manufacturing, and the human experience alongside a community of passionate, creative individuals. Join us on this extraordinary journey, as we work together to transform our vision into reality. About the Team: The Materials and NDE (Non-Destructive Evaluation) team plays a central role in enabling Terran R to fly, re-fly, and scale: developing, characterizing, and inspecting materials and processes across all parts of the vehicle. From welding and additive manufacturing to advanced composites, the team works at the intersection of innovation and execution, balancing performance and reliability with cost, quality, and schedule. As we move toward first flight and beyond, the challenges become more exciting, offering opportunities to shape how we design and develop for re-use. With ownership across products, systems, and disciplines, engineers gain broad exposure and drive key decisions across design, manufacturing, and operations. About the Role: Your core responsibilities will be: • Work closely with RT Level 3 inspectors and NDE Engineers to develop and execute feasibility studies, POD's, and qualification plans, • Act as primary Level 2 point-of-contact for CR/DR/CT inspection development, • Perform digital and computed radiographic inspections in cabinet, vault, and field settings, • Evaluation of Radiographic images for quality in accordance with specific acceptance criteria, • Detailed and comprehensive documentation/reporting of radiographic image analysis results, • Interface with outside stakeholders regarding inspection results and future possibilities, • Develop and publish part-specific NDE techniques for a variety of complex parts, • Plan and program automated digital RT inspections, • Work with vendors to troubleshoot and maintain radiographic equipment, • Proof of NDE Classroom Training in Non-Film Radiography, • Previous certification in non-film radiography (CR/DR) per NAS 410, SNT-TC-1A or equivalent and documentation of same. (be prepared to provide these records prior to interview), • Extensive (5+ years) and verifiable experience performing non-film RT inspections, • Extensive and verifiable experience evaluating radiographs for quality in accordance with various acceptance criteria of which 1-2 years should be direct experience evaluating digital images, • This experience should be specific to weld quality, casting/forging quality, and/or base material evaluation in aerospace or other highly regulated industry such as nuclear, oil & gas or power generation. Profile shots in a refinery or shut down setting do not meet the above requirement, • IRRSP (X-Ray & Gamma), • Conventional Film Radiography experience (3 years minimum), • Experience reading and interpreting engineering work instructions and drawings, • Experience with inspection of additively manufactured materials, • Experience inspecting various materials and geometries, • Knowledge of industry standards (NASA, AMS, AWS/ASME, ASTM, etc.), • Experience with qualification of NDE inspection techniques/procedures in one or more volumetric methods, • Film or RT image interpretation classroom training, • Experience with CAD, • Experience Auditing 3rd Party NDE Vendors, • Experience with QA/QC and/or Lean Manufacturing concepts and applicationsRelativity is seeking NDE Specialists at various levels. If you do not meet the minimum requirements of the Specialist role as detailed above, we still encourage you to apply. Level will be determined based on years of experience, expertise in relevant NDE method, and ownership and delivery of critical projects, among other criteria., • NDE Inspector II: $[30.96] - $[39.60], • Sr NDE Inspector: $37.40] - $[48.40] Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$45.31—$58.63 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job Description We are seeking a skilled Embroiderer to join our production team. This is a hands-on, temp-to-hire opportunity for an experienced professional who can operate embroidery machines, maintain quality standards, and work efficiently in a fast-paced environment. Key Responsibilities * Operate commercial embroidery machines to produce high-quality finished products * Set up machines, including threading and material preparation * Monitor embroidery runs for accuracy, alignment, and quality * Perform basic troubleshooting and resolve minor machine issues * Handle multiple projects simultaneously while meeting deadlines * Perform heavy lifting as required * Maintain a clean and organized work area * Work collaboratively with team members and communicate production needs clearly Qualifications & Requirements * Proven experience operating embroidery machines * Strong knowledge of embroidery and sewing techniques * Experience with machine setup and threading * Ability to troubleshoot basic machine issues * Excellent attention to detail and commitment to quality * Ability to work in a fast-paced production environment * Strong communication and teamwork skills * Ability to lift heavy materials as required

Job DescriptionBenefits: • 401(k) matching, • Company parties, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off Role and Responsibilities 1. Setting up and Running CNC machinery for production runs., 2. Ensure the machine has the proper computer program and necessary tools installed., 3. Position the materials being used on the machine and turn on the power., 4. CNC machine operators monitor machinery for any problems during the production run. If there is an issue, operators may adjust the program to correct the problem or consult with a programmer who fixes the program. After items have been produced, machine operators ensure that they meet specifications and verify their quality per procedure., 5. Must interpret blueprints, manuals, and other work instructions. Understands what non-conforming product is and how to take appropriate actions., 6. CNC operator machinists additionally clean and perform basic preventative maintenance functions on machines, tooling and parts. They must work safely to prevent on-the-job injuries, which includes wearing personal protective equipment such as safety glasses. They also inspect cutting tools for sharpness and usability., 7. Detect malfunctions using precision measuring instruments such as micrometers, dial calipers, depth gages, indicators and scales, according to manufactures spec. Communicate with Shop Foreman and Production scheduler for assignments, and to resolve machining or quality issues as well. Qualifications and Education Requirements 8. Self-Starter, 9. Ability to work alone, 10. Positive attitude, 11. Attention to detail, 12. Ability to meet tight deadlines, 13. Ability to solve problems independently and must not be afraid to ask for help when needed, 14. High School graduate, 15. Requires basic shop mathematical skills., 16. Must have strong oral and written communication skills, and be able to follow verbal and written instructions well., 17. Must be open to being exposed to noise, fumes and varying temperatures., 18. Must be able to perform repetitive motions and must have strong finger dexterity. Preferred Skills 20. Ability to adapt to changes in procedures, 21. Great note taking, 22. Organization and time management, 23. Strong Attention to Detail, 24. Able to Follow Verbal and Written Instructions

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Materials and NDE (Non-Destructive Evaluation) team plays a central role in enabling Terran R to fly, re-fly, and scale: developing, characterizing, and inspecting materials and processes across all parts of the vehicle. From welding and additive manufacturing to advanced composites, the team works at the intersection of innovation and execution, balancing performance and reliability with cost, quality, and schedule. As we move toward first flight and beyond, the challenges become more exciting, offering opportunities to shape how we design and develop for re-use. With ownership across products, systems, and disciplines, engineers gain broad exposure and drive key decisions across design, manufacturing, and operations. About the Role: Your core responsibilities will be: • Perform volumetric NDE inspections using established, novel and advanced Phased Array Ultrasonic (PAUT) & Total Focusing Method/Full Matrix Capture (TFM/FMC) techniques, • Work closely with UT Level 3s and NDE Engineers to develop and execute feasibility studies, POD's, and qualification plans, • Evaluation of acquired PAUT/TFM/FMC data for quality in accordance with specific acceptance criteria, • Detailed and comprehensive documentation/reporting of inspection results, • Engage in proactive mentorship and provide training and oversight for less experienced Inspectors, • Interface with outside stakeholders regarding inspection results and future possibilities, • Develop and publish part-specific NDE techniques for a variety of complex parts, • Work with vendors to troubleshoot and maintain equipment, • In depth comprehension and effective application of relevant NDE inspection plans, procedures, and techniques, • Level 2 or 3 certification in PAUT per NAS 410, SNT-TC-1A or equivalent and documentation of same. (Be prepared to provide these records prior to interview), • 2+ years and verifiable experience performing PAUT in a production aerospace setting, • Extensive and verifiable experience analyzing inspection data to specific acceptance criteria, • NDE Level II Certification in Radiography (RT/DR/CR/CT), dye penetrant (PT), visual inspection (VT,CWI), Eddy Current (ET, ECA), • Experience contributing to system design and qualification efforts for aerospace customers (i.e. Boeing, Nasa, DoD, Space Force, etc…), • Current ASNT UT Level 3 certification, • Experience with inspection of additively manufactured materials, FSW's, and OTW's, • Experience inspecting various materials and geometries, • Knowledge of industry standards (NASA, AMS, AWS/ASME, ASTM, etc.), • Experience with qualification of NDE inspection techniques/procedures in one or more volumetric methods, • Experience with CAD, • Experience Auditing 3rd Party NDE Vendors, • Experience with QA/QC and/or Lean Manufacturing concepts and applications At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$37.40—$48.40 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job Description Emerald Technologies has an exciting opportunity for an SMT Machine Operator II (SMT Operator II) to join its Brea, CA team! The SMT Operator II is responsible for the setup, operation, and shutdown of various manufacturing equipment. This role also includes performing basic preventive maintenance and ensuring compliance with safety and quality standards. At Emerald Technologies each employee has a significant role in building innovative products for various industries. Come and work in a supportive, fun team atmosphere where the work is meaningful, and careers have no limits! Responsibilities of the SMT Operator II: • Set up, operate, and shut down assigned equipment according to established procedures., • Perform basic preventive maintenance tasks and maintain accurate maintenance logs., • Ensure products meet quality specifications and production schedules., • Notify the Machine Group Leader of any quality issues or deviations., • Follow proper procedures for handling and disposing of leaded and non-leaded solder (especially for Jade and Wave machines)., • Maintain a clean, organized, and safe work environment by adhering to safety protocols and using appropriate protective equipment., • Assist in conformal coating and other production tasks as required. Benefits of the Job: • Competitive medical, dental, and vision benefits, • Health Savings Account/Flexible Spending Account, • 401K and company matching with no vesting period, • PTO for rest and relaxation, • Gym reimbursement (through Anthem), • Employee Assistance Program, • A safe and inclusive work environment with team and management support, • Employee training and development, • Community service and philanthropic initiatives, • Employee appreciation and events, • Career advancement opportunities, • Employee Referral program, • Employee discounts Qualifications of the SMT Operator II: • High School Diploma or equivalent., • 2–5 years of experience in a manufacturing environment., • Strong knowledge of IPC-A-610 standards and component identification., • Ability to follow detailed written instructions and work with hand tools., • Demonstrated ability to multitask and manage time effectively., • Self-motivated with a strong sense of responsibility and teamwork., • Willingness to operate various machines as directed by the supervisor. Emerald Technologies is an electronics manufacturing services (EMS) provider for original equipment manufacturer (OEM) customers, focusing on high-reliability electronic assemblies. With design and manufacturing facilities in California, Michigan, New Hampshire, Oregon as well as in China and Malaysia. Emerald Technologies specializes in high mix, low- to medium-volume manufacturing for high-reliability markets in the Aerospace/Defense, Life Sciences, Renewable Energy, Industrial Controls, Power & Infrastructure, Semiconductor and Telecommunications sectors. However, our rapid turnaround times, responsive customer service, and collaborative problem-solving approach distinguishes us from the competition. At Emerald Technologies, we are committed to fully understanding and meeting the needs of our customers through quality excellence, advanced engineering, and a solid commitment to customer relationships. Emerald Technologies, is an equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Schedule & Budgeted Hours Shift Hours: Monday – Friday, 2:15 PM – 11:00 PM Arrival Expectation: Operators are expected to arrive by 2:15 PM to allow 15 minutes for equipment setup before production begins. Paid Hours Per Day: 8.75 hours (includes one 30‑minute unpaid meal break). Overtime: May be required based on production needs, compensated in accordance with California labor law. Breaks Meal Break: One 30‑minute unpaid meal break, typically scheduled around 6:30 PM – 7:00 PM. Rest Breaks: Two paid 10‑minute rest breaks per shift, in compliance with California labor law. Budgeted Weekly Hours: 43.75 hours (5 shifts × 8.75 hours). Overtime: May be required based on production needs, compensated in accordance with California labor law.

Job Description Under the guidance of the lead man or supervision, operates Grinding equipment to manufacture metal parts to print specifications. Performs required quality workmanship through the use of precision measuring instruments and special test equipment. Follows scheduled workflow assignments in order to meet customer demands and production control requirements. Works towards meeting established standards and performance requirements. Key Position Responsibilities: The duties and responsibilities include, but are not limited to, the following: · Grinds metal parts to print specifications and established performance standards. · Performs quality workmanship through the use of precision measuring instruments, enters data into the Statistical Process Control (SPC) system and special test equipment. · Refers to drawings, engineering prints and written instructions to machine products to customer / engineering specifications. · Follows scheduled workflow according to assigned priorities and communicates deviations to department lead. · Works toward increased performance and makes adjustments to equipment and set-ups as needed. · Insures that all materials are available prior to initiating production and communicates shortages to department lead. · Conforms to written instructions and procedures to achieve increased performance in production and quality workmanship. · Monitors equipment maintenance and adheres to safety regulations. · Performs other duties as assigned or necessitated by change or condition. · Must be willing to work overtime as needed. · Participates in LEAN, 6S and Root Cause analysis activities as required. · High School Diploma, Equivalent, or GED. · Other related duties as required. Essential Qualifications, Skills and Experience: • High School diploma, equivalent or GED, • Operate one Centerless grinding machines (Handle and Cam-Out) according to blueprints, specifications, work orders and instructions to meet or exceed production requirements., • Must be able to grind Thread Diameter (TD)., • Must be able to perform “Finish” grind to hold close tolerances (.0002 - .0005)., • Must be able to dress both grinding and feed/regulating wheel., • Ability to suggest tooling improvements to Engineering for process/method improvements., • Ability to fluently read and follow instructions in English., • Ability to interpret prints and engineering drawings., • Ability to perform machining on a variety of high strength materials (Inconel, A286, Stainless, 300M, 15-5, etc)., • Knowledge of tooling to achieve consistent quality results., • Knowledge of precision measuring instruments., • Must read, understand, refer to and interpret Geometric, Dimensioning and Tolerancing (GD&T) dimensioning and third view projection blueprints. Desired Qualifications, Skills, and Experience: • 5+ years of grind experience in the fastener industry., • Experience in an Aerospace manufacturing environment preferred., • Bilingual - English and Spanish ITAR Requirement: • Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) or a Foreign Person for whom a license is obtained. Quality Requirement: • Employees will participate in understanding, implementing and maintaining the Company Quality Policy in accordance with AS-9100C and/or ISO-9001:2008 requirements. Physical Requirements/Working Conditions: • This is primarily a position that requires employees to stand for 8 hours and grind production parts. This position requires lifting parts up to 25 lbs. and the employee must often bend and reach to load materials on equipment. The employee also moves throughout the building to collect, deliver, and handle production parts. Employer’s Statement: • This job description does not list all of the duties of the job. You may be asked by supervisors or managers to perform other duties. You will be evaluated in part based upon your performance of the tasks listed in this job description., • The company reserves the right to change, rescind, add or delete the duties and responsibilities of positions within this job classification at any time. The job description is not a contract for employment, and either you or the employer may terminate employment at any time, for any reason. We offer competitive compensation and excellent benefits including Medical, Dental, and a company matched 401k plan. Roller Bearings of America / Sonic Industries, Inc. EOE/W/M/Vets/Disability Torrance Location Available Immediately Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Parental leave, • Referral program, • Vision insurance Work Location: In person

Job Description At Winonics, we foster a collaborative and innovative work environment where employees are valued and empowered. With a strong presence in the manufacturing industry, we are committed to excellence, safety, and continuous improvement. Our team-oriented approach ensures that every employee has the resources and support needed to succeed in their role. We pride ourselves on a structured yet dynamic workplace, where hands-on training and mentorship are key components of our culture. Our leadership team is approachable, encouraging open communication and professional growth. Whether through technical training, skill-building opportunities, or a focus on operational efficiency, we invest in our employees to help them thrive. Position: Plating Operator Location: Brea, CA Schedule: Full-Time, Onsite Position Summary The Plating Operator is responsible for performing a variety of chemical and plating processes used in PCB manufacturing, ensuring panels are processed accurately and efficiently through each required step. This role operates wet process and plating equipment, monitors chemical conditions, performs routine inspections, and maintains strict adherence to quality, safety, and environmental standards. The Plating Operator supports overall production flow by ensuring all products meet company and customer specifications for quality and on-time delivery. Duties & Responsibilities: • Execute plating and chemical process steps for PCB manufacturing, including copper plating, acid/tin plating, electroless copper, nickel, soft gold, hard gold, and all related cleaning and stripping processes., • Perform resist strip, copper etch, solder strip, and associated wet processes according to established procedures., • Conduct routine chemical preventative maintenance to ensure stable bath conditions and reliable equipment performance., • Inspect product and process stages to verify compliance with specifications and identify potential issues., • Follow all work instructions and order-specific requirements with precision., • Maintain compliance with local, state, and federal regulations related to chemical handling, safety, and waste management., • Coordinate with Waste Treatment to properly handle and dispose of spent chemicals., • Adhere to company safety protocols for equipment, chemical use, and PPE requirements., • Support Production and Engineering teams on product flow, quality initiatives, and process improvement activities., • High school diploma preferred., • 2-6 years of plating or wet process experience in PCB manufacturing or a similar electronics production environment., • Ability to read and follow technical work instructions and production documentation., • Ability to wear full PPE, including gloves, safety glasses, face shields, aprons, and chemical-resistant footwear., • Comfortable working around chemical processes in controlled environments., • Strong communication skills and attention to detail., • Basic computer skills and ability to learn new systems quickly., • Able to lift 25 pounds without straining, • Able to stand throughout the entire shift All employment offers at Winonics are contingent upon the successful completion of a background check and pre-employment drug screening. Winonics is a drug-free workplace and complies with all applicable federal, state, and local laws regarding background investigations and substance testing.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Quality team is focused on embedding quality into every part of the design and production process for Terran R. Not just inspecting at the end but influencing how things are built from the start. The team embeds themselves directly within design, manufacturing, test, and launch teams to stay close to the hardware, understand constraints, and proactively shape decisions. As we move beyond initial development into production and then scaled operations, now is the time to put the right processes, controls, and inspections in place without slowing down progress. The team plays a key role in balancing risk, driving a culture of ownership, and ensuring that speed doesn't come at the cost of reliability. Success here means building a quality system that scales with the Terran R program and Relativity as a whole. This is a 1st shift position with a standard schedule of 5:00AM-3:30PM, Monday through Friday. Please note that this position is structured around a baseline expectation of a 50-hour workweek, which may include occasional overtime as needed to meet operational goals. About the Role: • Conduct thorough inspections (in-process and final) on propulsion components, large structures and mechanical assemblies., • Use precision hand tools to perform dimensional inspections on flight hardware, • Identify opportunities for process improvements and contribute to the development and implementation of quality initiatives within the organization., • Diligently review all hardware requirements and determine pass/fail status, documenting outcomes and any non-conformances or deviations found, • Take closeout photos of large integrated assemblies upon completion of final walkdowns., • 5+ years of quality inspection experience in an aerospace manufacturing environment, supporting production hardware., • Expert proficiency with precision hand tools (micrometers, calipers, bore gages), • Proven ability to work closely with design engineering, manufacturing, and production teams to resolve inspection and quality issues., • Demonstrated ability to perform thorough inspections and ensure strict compliance with quality standards and regulatory requirements., • Clear and effective communicator, capable of interfacing with inspectors, engineers, production personnel, and quality stakeholders., • Prior experience inspecting COPVs and/or avionics hardware, including electrical connectors, harnesses, and integrated assemblies., • Demonstrated ability to take initiative, lead projects, or influence quality improvement efforts without formal authority., • Highly organized and capable of bringing structure to ambiguous or previously undefined environments. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$33.15—$42.90 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job Description Ready to ensure precision where it matters most? Join an established aerospace manufacturer where your inspection expertise directly impacts flight safety and mission success. This isn't just quality control—it's aerospace excellence with a 4x10 schedule. Company Description Our client is a well-established 62+ year aerospace fittings manufacturer in Covina, CA, known for their close-knit culture, employee longevity, and aggressive 5-7 year growth plan backed by significant capital investment. They specialize in high-precision hydraulic and pneumatic system components for critical aerospace applications. Role Impact As a Quality Inspector, you'll be the final checkpoint ensuring every aerospace fitting meets exacting dimensional specifications before it reaches the aircraft. Your measurements and inspections protect both product integrity and aviation safety while supporting the company's production expansion goals. Key Responsibilities • Perform dimensional inspections using precision hand tools including micrometers, calipers, gages, optical comparators, height gages, and drop indicators to verify aerospace component specifications, • Read and interpret complex blueprints with aerospace standards (AS, MS, NAS, NSA) and work instructions to ensure dimensional accuracy, • Monitor production operations in real-time to identify non-conformances and recommend immediate corrective adjustments, • Conduct First Article Inspections independently to validate new setups and production runs meet engineering requirements, • Communicate inspection findings clearly to machinists, supervisors, and production personnel to maintain quality flow, • Support calibration protocols for inspection equipment to ensure measurement accuracy and compliance with aerospace quality standards, • Document inspection results and maintain quality records in accordance with ISO 9001 and AS9100 requirements, • Reject non-conforming products and materials that fail to meet specifications, protecting downstream operations Qualifications Required • 2+ years of quality inspection experience in manufacturing environment, • Proficiency with precision measurement tools: micrometers, calipers, gages, optical comparators, height gages, • Blueprint reading skills with ability to interpret GD&T (Geometric Dimensioning and Tolerancing), • Strong mathematical skills for dimensional analysis and tolerance verification, • Familiarity with Microsoft Windows operating systems for quality documentation Preferred • Aerospace or precision machining inspection background, • AS9100 or ISO 9001 quality system knowledge, • Experience with First Article Inspection protocols, • ITAR compliance awareness, • Optical comparator proficiency for complex geometry verification Benefits & Value Proposition Compensation: Market competitive based on experience Work-Life Balance: • 4-day work week (10-hour shifts), • Three-day weekends standard, • Overtime opportunities available for additional earnings Comprehensive Benefits: • 401(k) with company match, • Medical, dental, and vision insurance, • Paid time off, • Life insurance Why This Opportunity Stands Out: • Family-oriented culture with employees who have long tenures, • Part of aggressive growth plan with human capital as top priority, • Work with advanced aerospace components for critical applications, • Skills-based evaluation culture that values technical expertise, • Stable, established company with 62+ year track record Culture Join a close-knit quality team where craftsmanship is valued and your technical expertise makes an immediate impact. The Operations Manager genuinely cares about team success and creates an environment where precision and attention to detail are celebrated. Long employee tenures reflect the supportive, family-oriented atmosphere. Call-to-Action Ready to be the guardian of aerospace quality? Apply and Pave Talent will contact qualified candidates within 48 hours. Confidential search—your application privacy is fully protected. Apply now to join a growing aerospace leader!

Job DescriptionFor nearly 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on demand and with greater speed and efficiency than our competitors. We’re hiring for a Quality Mechanical Inspector Level 2 position in Hawthorne, CA. This is an opportunity in which you will be supporting the first shift. This is a Full-Time position. If you have a passion for mechanical products and a keen eye for quality, this could be the perfect opportunity for you! Responsibilities: • Perform detailed inspections—visual, dimensional, and physical—on components, assemblies, and raw materials throughout various production phases (including in-process, final, and first article) to verify compliance with engineering drawings and specifications., • Operate and utilize precision measuring instruments such as micrometers, dial indicators, gauge blocks, height gauges, and profilometers to validate part conformity., • Conduct surface plate inspections and statistical lot sampling based on quality requirements., • Apply sharp visual inspection skills to identify workmanship issues and product defects, including damage such as burrs, scratches, loose fasteners, dings, and inadequate edge distances., • Identify and categorize nonconformities and confirm that corrective actions or rework have been properly executed., • Receiving shipping documentation for accuracy, confirming part numbers, serial numbers, change notices, and destination data are correct., • Assure appropriate packaging, preservation, and delivery handling upon receiving.Required Qualifications:, • 3+ years of hands-on experience with precision mechanical parts inspection., • Strong ability to read and interpret manufacturing drawings and industry/commodity standards., • Proficient in GD&T and validating dimensions (tolerances ≥.005”) using hand tools (e.g., micrometers, calipers, height gauges)., • Ability to adapt to new technology and software., • Excellent visual acuity to detect defects in complex products., • Must be willing to undergo a background check.

Job DescriptionMETROLOGY INSPECTOR Freeform is deploying software-defined, autonomous metal 3D printing factories around the world, bringing the scalability of software to physical production. Our proprietary technology stack leverages advanced sensing, real-time controls, and data-driven learning to produce digitally-verified, flawless parts at unprecedented speed and cost. Our mission is to make the transformative power of 3D printing available to all industries at scale and unlock the future of innovation. We are looking for a detail-oriented Metrology Inspector to join our quality team and take ownership of inspecting complex metal 3D printed parts. In this hands-on role, you'll operate our Zeiss Contura CMM using existing Calypso programs, perform manual inspections using gauges, micrometers, and other precision measurement tools, and utilize advanced metrology technologies such as blue light scanning. You'll clearly communicate results to engineering and production teams, help maintain inspection equipment, and contribute to continuous improvement of quality workflows. This is a great opportunity to work in a growing lab where you'll gain exposure to cutting-edge inspection methods and expand your metrology expertise over time. 3D printing experience is not required to be successful here - rather we look for smart, motivated, collaborative individuals who love solving hard problems and creating amazing technology! Responsibilities: • Operate Zeiss Contura CMM machine using Calypso for the inspection of complex metal 3D printed parts and geometries., • Perform manual inspections using gauges, micrometers, calipers, and other precision measurement tools to inspect feature tolerances, ensuring accuracy and adherence to quality standards., • Utilize blue light scanning and other advanced metrology tools to inspect and analyze part geometries., • Execute inspection programs developed by engineering and quality teams, and ensure parts are measured accurately and consistently., • Interpret GD&T requirements as applied to engineering drawings and notes, identifying and addressing dimension interpretation issues. ., • Collaborate with engineers and quality leads to communicate inspection results and flag potential part or process issues., • Assist in maintaining and organizing inspection programs, toolkits, and inspection records., • Support upkeep of metrology equipment and contribute to continuous improvement in inspection workflows. Basic Qualifications: • 3+ years of metrology experience, • Experience operating a CMM, • Experience interpreting engineering drawings and understanding GD&T principles Preferred Skills and Experience: • 1+ years of CMM programming experience (Calypso, PC-DMIS, COSMOS), • Experience with CMM inspection of metal 3D printed parts, • Ability to utilize power tools, hand tools, cranes, forklifts, and other heavy equipment, • Ability to lift and/or move up to 30lbs unassisted, • Must be available and willing to work overtime when needed Location: • We are located in Hawthorne, CA in a 35,000 square foot, state-of-the-art facility featuring large open spaces for team collaboration, R&D, and production, as well as easy access to the 405, 105, and 110 freeways. Our facility is in the heart of Los Angeles' vibrant emerging tech ecosystem alongside many other high growth startups and enterprises. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process. Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated pay range for this role is $28-$35/hour, depending on the level of seniority demonstrated in the interview process., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Quality team is focused on embedding quality into every part of the design and production process for Terran R. Not just inspecting at the end but influencing how things are built from the start. The team embeds themselves directly within design, manufacturing, test, and launch teams to stay close to the hardware, understand constraints, and proactively shape decisions. As we move beyond initial development into production and then scaled operations, now is the time to put the right processes, controls, and inspections in place without slowing down progress. The team plays a key role in balancing risk, driving a culture of ownership, and ensuring that speed doesn't come at the cost of reliability. Success here means building a quality system that scales with the Terran R program and Relativity as a whole. About the Role: • Perform receiving inspections of PCBA and quality assurance checks on avionics systems with its subassembly, components, wire harnesses and installations to ensure compliance with regulatory standards and company policies., • Maintain detailed inspection records and documentation to track the status and history of avionics components and systems., • Stay current with industry standards, regulations, and best practices related to avionics quality assurance and inspection processes., • Provide guidance and training to other team members on avionics quality inspection techniques and procedures., • Identify opportunities for process improvements and contribute to the development and implementation of quality initiatives within the organization., • Minimum 5 years of experience as a PCBA Inspector in a manufacturing environment, preferably in a quality function., • Proficient in inspecting solder joints, crimping, conformal coating, staking, and surface-mounted devices in accordance with NASA 8739 and/or IPC-J-STD-001, IPC-A-610 standards., • Knowledge of cable harness assembly and inspection following NASA-STD-8739.3 and 8739.4 and/or IPC-A-620 standards., • Experienced in conducting continuity test using DMM and inspection using portable measuring devices., • Familiar with avionics systems, components, and installations is essential, with the ability to interpret engineering drawings, technical manuals, and specifications., • Well-versed in process development and first-time quality efforts., • Highly organized and able to provide structure and direction to the previously undefined., • Experience leading projects or teams, even if not in a leadership role. Demonstrate the ability to take initiative and drive quality improvement efforts. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$29.88—$38.67 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job DescriptionDescription: Signia Aerospace is a global, integrated provider of high-performance systems and specialized components for the aerospace industry. Signia currently operates two complementary business segments: Thermal Management (key brands include ACE Thermal Systems and Mezzo Technologies) and Mission Systems (key brands include Onboard Systems, Lifesaving Systems, and Meeker Aviation). The Signia brands are leaders in their respective markets and provide a compelling value proposition to both aerospace and defense OEMs and end-users. Onboard Systems Hoist & Winch, located in Anaheim, CA is one of the world’s leading providers of Search & Rescue (SAR) and Human External Cargo (HEC) advanced mission equipment for civil, commercial, and military helicopters. Position Overview Location: Anaheim, CA (Onsite) This is a union position covered under a collective bargaining agreement. Starting pay is $25.00 per hour (day shift) and $27.50 (swing shift), per the union contract. The ability to pass a pre-employment background check and an FAA-regulated drug test is required. The Quality Inspector will be responsible for performing inspections, measurements, and tests on products throughout the production process. This role will also support quality engineering and management initiatives by collecting data, implementing corrective actions, and maintaining compliance. What You’ll Do • Perform inspections, measurements and tests of products during the receiving, in-process and final inspections in accordance with documented procedures and work instructions. Collect and record inspection and test results. Complete all required forms and documentation completely and accurately., • Support Quality Engineering and Quality Management by helping to assure compliance with the AS9100, ISO 9001, IPC 610 and IPC 620 and applicable FAA standards and regulations (Part 24 and Part 145, 8130-2’s), • Collect data used to generate key quality metrics that drive efforts to assure continual improvement of Onboard Systems processes and products, • Support the implementation and maintenance of effective corrective actions, as directed, to prevent failure recurrence of Onboard Systems products, • This position requires the ability to communicate in English, both verbally and in writing, to complete inspection reports and understand safety and quality standards., • Inspection experience of complex electro-mechanical parts, • Ability to read and comprehend complex documents to include, but not limited to, drawings, procedures, work instructions, forms and schematics, • Strong attention to detail, analytical skills, and problem-solving capabilities What’s In It for You • This position is part of union, offering negotiated benefits and protections. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status Requirements:

Job DescriptionDescription: We are seeking an experienced CMM (Coordinate Measuring Machine) Operator to join our quality assurance team. The ideal candidate will hands-on experience operating and programming CMM equipment to ensure precision and compliance with engineering specifications. This role requires strong attention to detail, technical expertise, and a commitment to maintaining high-quality standards in a manufacturing environment. Requirements: Key Responsibilities: • Operate and program CMM machines (Mitutoyo) to inspect and measure parts according to engineering drawings and specifications., • Interpret blueprints, GD&T (Geometric Dimensioning and Tolerancing), DPD (Digital Product Definition) and technical documentation to perform accurate measurements., • Create and modify CMM programs using software such as MCOSMOS., • Perform first article inspections, in-process checks, and final inspections to ensure product quality., • Document inspection results and maintain accurate records in accordance with quality standards., • Troubleshoot measurement discrepancies and collaborate with engineering and production teams to resolve issues., • Maintain CMM equipment and ensure calibration compliance., • Experience: 3–5 years operating and programming CMM machines in a manufacturing or aerospace environment (preferred)., • Technical Knowledge: Proficient in GD&T, blueprint reading, and metrology principles., • Software: Experience with CMM programming software (MCOSMOS, equivalent)., • Strong analytical and problem-solving skills., • Ability to work independently and as part of a team., • High school diploma or equivalent required, • Experience with additional inspection tools (micrometers, calipers, height gauges)., • Familiarity with ISO 9001 and AS9100 standards.

Job Description At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. Providing our employees with job training and opportunities for growth, development, and advancement. We take pride in fostering a safe environment for all employees, Summary: The Bindery Production Assistant is responsible for helping the Bindery Operator with the setup, adjustment and safe operation of all relevant bindery equipment such as: MBO folders with pile and continuous feeders; Heidelberg/Stahl Folders with continuous feeders; and 6 pocket Muller Martini-Presto saddle stitchers to produce quality finished products that meet customer specifications and quality standards. Schedule: 1st shift: Monday-Friday, eight or more hours per day, five days per week based on business needs. Primary schedule will be 5:00 AM – 1:30 PM, Monday – Friday, or similar. Training may occur at other times. Salary Range: $18.00 - 20.00 Hourly Compensation commensurate with experience. At this time, we are not engaging with agencies or third-party recruiters. Thank you for your understanding. Essential Duties and Responsibilities include the following: • Checks paper sheet size/type etc., and verify materials required, • Assists with managing the preparation of next jobs to be printed, • Assist with press maintenance tasks and cleaning, • Support the Lead Press Operator by completing tasks as directed to keep the press running, • Actively remove waste items for recycling, • Complete and maintain all required paperwork, records, documents, etc., • Ensure all equipment, tools, and workstation are in good working order and is free of safety hazards, • Report workplace hazards to management immediately, • Wear all assigned Personal Protective Equipment (PPE) when required, • Report all work related injuries, illnesses, and/or near misses to management immediately, • Keep all work area/station in compliance with our housekeeping guidelines, • Follow and comply with all safety and work rules and regulations, • Maintain departmental housekeeping standards, such as keeping floors swept and absent of debris that may be a work hazard, • Regularly perform general housekeeping duties in your work area(s), • Adhere to all safety policies and protocols and maintain a safe working environment, • Attend all department/company meetings Qualifications • High School Diploma or GED equivalency, preferred 4over Company History: 4over was founded in February of 2001. What started off as creating business cards and web page designs by a husband and wife, quickly flourished. Since the company was founded, we are now a private equity owned company growing and expanding across many states. Through our 4over Core Attributes, we are committed to meeting and exceeding customer expectations, cultivating and nurturing our relationships, providing excellence and caring for others. Health and Life Insurance- • Medical, Dental, Vision, Life/AD&D Insurance, Disability, and Flexible Spending Accounts (FSAs) for Health Care and Dependent Care, • 4over pays 100% of the employee’s premium for his/her Basic Life/AD&D Insurance in the amount of 1x the employee's annual salary, up to $500,000, • New employees are eligible to enroll the first of the month, following 1 month of employment, • Semi-annual open enrollment (January 1st and July 1st), • Discretionary employer match; typically, 50% of employee deferrals up to 6% of compensation, • 9 Paid Holidays

Job DescriptionDescription: The Slitter Operator is responsible for the safe and timely production of high-quality metal products (e.g., coils, sheets, or blanks) using specialized processing equipment. This role requires adherence to strict safety, quality, and material specifications within a high-volume manufacturing environment. Essential Duties and Responsibilities: Production & Preparation • Obtains and reviews detailed work orders or cut sheets from the supervisor., • Acquires the specified metal stock (e.g., master coil, steel, aluminum) and other materials listed in the Bill of Materials (BOM)., • Performs general setup and tooling of the specified equipment (e.g., slitter, shear, leveling line) to meet the product specifications., • Loading of master/jumbo metal coil onto the unwind or feed table, ensuring proper alignment., • Runs the job in accordance with established cutting, slitting, or processing standards and tolerances.Quality & Compliance, • Responsible for the timely production of quality metal parts, slit coils, or sheets in accordance with established standards and customer requirements., • Inspects finished product for defects such as burrs, camber, gauge issues, or surface blemishes, and properly segregates scrap metal or rejected material., • Removes required gauge and width/length quality samples for submission to the Quality Assurance (QA) department., • Ensures that all aspects of the operation are performed in accordance with ISO Procedures and industry standards for metal processing.Safety & Maintenance, • Prior to start-up, performs required pre-operation safety checks and inspection on the equipment (e.g., checking blades, hydraulic levels, emergency stops)., • Responsible for the safe operation of heavy metal processing equipment., • Alerts the shift supervisor immediately to any quality issue, machine malfunction, or tooling damage., • Performs minor maintenance duties, tooling changes, and repairs as required., • Responsible for cell housekeeping, ensuring the work area is free of debris, scrap, and oil/grease hazards.Operational Excellence, • Completes all necessary adjustments and fine tunes equipment settings (e.g., tension, clearance, cutting parameters) to achieve maximum efficiency and quality of product., • Performs booking and line clearance of all jobs, ensuring accurate material usage reporting in the system., • Labels all finished coils, bundles, or crates per established standards for tracking and inventory., • Participates in continuous improvement programs (e.g., Lean, Six Sigma) to enhance metal manufacturing processes., • High School diploma or GED., • Prior experience in operating a metal slitter, shear, press brake, or other heavy metal processing equipment is strongly preferred., • Strong attention to detail and a commitment to producing high-quality work within tight dimensional tolerances., • Demonstrate initiative to learn and accept additional responsibility, particularly in complex machine setups and troubleshooting., • Proven ability to work as a team within a diverse workforce in a metal manufacturing or fabrication environment., • Knowledge of manufacturing safety standards and guidelines, specifically in handling heavy metal coils, sharp edges, and pinch points., • Ability to use and understand basic math, including fractions and decimals, for measuring metal dimensions and tolerances., • Fluent in English both verbal and written. The role requires the ability to perform various physical tasks essential to working in a manufacturing environment. These include: • Regularly lifting and carrying materials up to 20 lbs, and occasionally up to 40 lbs, with or without assistance., • Frequent walking, standing, bending, kneeling, reaching, and twisting throughout the shift., • Sufficient manual dexterity to operate tools, equipment, controls, and measuring devices., • Ability to work in elevated or confined spaces when performing set-ups or adjustments., • Tolerance for varying temperatures, including heat, cold, and humidity, depending on production conditions. This position is non-exempt and complies with California's wage and hour laws. Compensation for this role ranges from $22 to $25 per hour, depending on experience and qualifications. Benefits: • 401(k), • Health Insurance (Medical, Dental, Vision), • Life Insurance, • Paid Time Off (PTO) Bay Cities Metal Products is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive environment for all employees and applicants, regardless of race, color, religion, gender, sexual orientation, national origin, disability, or any other characteristic protected by California or federal law. At-Will Employment Disclaimer: Employment with Bay Cities Metal Products is at-will, meaning either the employee or the company may terminate employment at any time, with or without cause or notice, in accordance with California law.

Job Description JOB TITLE/LOCATION: Quality Inspector II – Baldwin Park, CA ESSENTIAL FUNCTIONS OF THE JOB: • Inspect products using inspection gauges at various inspection points throughout product lifecycle, • Generate spreadsheets for data collection., • Reconcile final inspection documentation for shipments., • Interact with source inspector as needed., • Test incoming raw materials., • Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping., • Reject all products and materials that fail to meet quality expectations., • Read blueprints, plans, and specifications to understand the requirements of products and services., • Measure product dimensions, examine functionality and compare the final product to the specifications., • Recommend improvements to the production process to ensure quality control., • Document inspection outcomes by completing detailed reports and performance records., • Teach the production team about quality control concerns to improve product excellence., • Supervise the production process., • Resolve quality-related issues in a timely manner. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. EDUCATION: High School diploma or General Education Degree (GED) preferred. EXPERIENCE: 3+ years performing inspection of assemblies (e.g. performs first article and in process inspection, verifies standard and pre-set gauging, performs first article & in-process inspection) KNOWLEDGE/SKILLS/ABILITIES: • Excellent knowledge of MS Office., • Good math and technical skills., • Strong understanding of quality control standards and testing techniques., • Strong written and oral communications skills, • Practical experience in precision inspection equipment and calibration, • Knowledge in aerospace materialsThis role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be a U.S. Person which is defined as a U.S. citizen, a lawful permanent resident [“green card” holders], U.S. National, Refugee, or Asylee.Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee’s pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Salary Range: $24-26 hourly. Relocation assistance not available and we are only considering local candidates.RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws

Job Description At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. Providing our employees with job training and opportunities for growth, development, and advancement. We take pride in fostering a safe environment for all employees. We are currently seeking an experienced 2nd shift Smithe Envelope Operator for our growing Bindery Department. Summary: The Envelope Operator is responsible for the setup, adjustment, and safe operation of the envelope machine (i.e. - F.L. Smithe Champion Envelope Convertor) to produce quality finished products that meet customer and company specifications and quality standards. Schedule: 2nd shift, Monday-Friday, eight or more hours per day, five or more days per week based on business needs. Primary schedule will be 12:00 PM – 8:30 PM, Monday – Friday, or similar. This is an on-site position requiring the employee to be present physically. Salary Range: $19.00 To 22.00 Hourly Compensation commensurate with experience. At this time, we are not engaging with agencies or third-party recruiters. Thank you for your understanding. Essential Duties and Responsibilities include the following: • Access the batching system to view batch lists and identify priority jobs to be completed, • Review job tickets and plan work processes to meet customer specifications for custom jobs, • Ensure machines are ready and set specifications to run products as required, • Quality control of completed jobs, providing updates on job status and schedule to the supervisor, • Make adjustments as needed to maintain specifications and timely flow of materials, • Monitor assigned machine during run to ensure machines are maintaining the proper requirements, • Unload machine and stack materials on pallets, • Ensure jobs are meeting quality and quantity requirements, • Troubleshoot machine problems, resolve if possible, notifying Floor Supervisor, • Maintain proper machine maintenance and lubrication, • Remove waste items for recycling, • Complete and maintain all required paperwork, records, documents, etc., • Ensure all equipment, tools, and workstation are in good working order and is free of safety hazards Qualifications • Six-months to one-year related experience utilizing an envelope machine (i.e. - F.L. Smithe Champion Envelope Convertor), • High School Diploma or GED equivalency 4over Company History: 4over was founded in February of 2001. What started off as creating business cards and web page designs by a husband and wife, quickly flourished. Since the company was founded, we are now a private equity owned company growing and expanding across many states. Through our 4over Core Attributes, we are committed to meeting and exceeding customer expectations, cultivating and nurturing our relationships, providing excellence and caring for others. Health and Life Insurance- • Medical, Dental, Vision, Life/AD&D Insurance, Disability, and Flexible Spending Accounts (FSAs) for Health Care and Dependent Care, • 4over pays 100% of the employee’s premium for his/her Basic Life/AD&D Insurance in the amount of 1x the employee's annual salary, up to $500,000, • New employees are eligible to enroll the first of the month, following 1 month of employment, • Semi-annual open enrollment (January 1st and July 1st), • Discretionary employer match; typically, 50% of employee deferrals up to 6% of compensation, • 9 Paid Holidays, • Accumulating PTO to be used after 90-days of continuous and active full-time service

Job Description Full Time + Benefits (Medical, Dental, Vision, 401k with Company Match, PTO) Job Type: On-site Hourly Range: $19.50 - $23.00, DOE Location: Chatsworth, CA Fralock is an engineered solutions provider of specialty components and subassemblies using advanced materials for high reliability, severe environment, and technically challenging applications. We develop and manufacture custom integrated solutions. Established in 1967, we are a critical solutions provider to Fortune 500 corporations, government, and targeted OEMs in a variety of industries including Semiconductor Equipment Manufacturing, Medical and Life Science, Aerospace and Defense, Industrial, Electronics, and Energy. Fralock is headquartered in Valencia, CA with manufacturing locations located throughout Northern and Southern California. VISION To be recognized by our customers as a leading solutions provider of proprietary engineered advanced materials for high reliability, severe environment, and technically challenging applications. MISSION To create value, profitably grow, and share our success with all stakeholders. CULTURE • Respect – We treat others the way they want to be treated., • Integrity – We practice a high standard of ethics in our business dealings with customers, suppliers, and employees., • Responsiveness – We have a sense of urgency in responding to internal and external requests and work proactively to solve problems., • Excellence/Competence – We empower our people to continuously improve and execute high quality work., • Teamwork – We work together to achieve Fralock business objectives by communicating at a high level, by listening and having clarity in our expectations of one another., • Individual Accountability and Personal Responsibility – We do what we have committed to do when we committed to doing it., • Continuous Improvement across all segments of the company This position requires access to information controlled under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR), the successful candidate must be a "U.S. person" as defined in the ITAR and EAR (which generally means (i) be a citizen or national of the United States; or (ii) be a lawful permanent resident of the United States; or (iii) have been admitted to the United States as a refugee, or have been granted asylum, as specified under applicable law. Main Functions Perform inspections, checks and tests for quality control for the manufacture of products. Interpret complex drawings, standards, procedures, and test data. Document results of inspections. Maintain calibration system. Typical Duties • Follow procedures, work, and inspection instructions in the job orders, • Perform inspections using CMM, Keyence, calipers, micrometers, or templates, • Work with Production/Receiving Inspection/Purchasing when parts are found out of tolerance, • Document results of inspections using First Article Report AS9102, customer-specific inspection documents, Fralock Dimensional Reports, copies of CMM report or written results in the job order, • Compare actual measurements to drawing tolerances using calibrated tools and inspection systems., • Perform visual inspections using IPC-A-600, IPC-A-610, and J-STD-001 criteria to assess workmanship, soldering, and cosmetic requirements., • Identify, tag, and document nonconforming items; coordinate with Quality and Engineering for resolution., • Issue certificate of conformance, • Maintain CMMs and inspection tools in good condition, including inspection stamp, • Perform calibration of calipers, micrometers and templates, and coordinates outside calibration, • Update and maintain Master Calibration List, • Inspect materials and components upon receipt to confirm documentation, certifications, and traceability meet requirements., • Conduct in-process checks to verify critical features and detect defects early in production., • Perform final inspections to confirm product readiness for shipment, including dimensional, visual, and functional checks., • Capture and upload inspection photos, ballooned drawings, and other evidence into QMS/ERP., • Participate in containment and root cause investigation activities when quality issues arise., • PC literate (Excel, Word, e-mail), • Knowledge in blueprint reading and geometrical tolerances; use of hand-held inspection tools and templates, • Minimum 2 years of quality inspection experience in a controlled manufacturing environment (aerospace, medical, or equivalent)., • Good communication skills both oral and written; English language proficiency for technical documentation and communication, • Proficiency in reading and interpreting engineering drawings and GD&T., • Familiarity with basic measurement tools and inspection equipment., • Competence in using MS Excel, Word, and ERP/QMS data entry., • Familiar with CMM inspection and Statistical Process Control (SPC), • Familiarity with ISO 9001/ AS 9100 and/ or ISO 13485 Standard, • Experience in Aerospace, Medical or Automotive industry, • Knowledge of IPC-A-600, IPC-A-610, and J-STD-001 standards., • Experience with flex/rigid-flex PCBs, SMT assemblies, or precision machined components., • Proficiency with vision systems, CMMs, and SPC tools., • AS9102 FAIR completion experience., • Knowledge in calibration Education Requirements High School Diploma Experience Requirements 2 years minimum in a quality related field Physical Requirements • Ability to multi-task, • Sitting/Walking/Standing, • Lifting in accordance with employee safety handbook Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of a position. Fralock provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Rocket Lab's Neutron team is responsible for bringing our new large rocket Neutron and its launch and test sites to life. From designing and testing Neutron's structures and components, to firing up its new Archimedes engines, to setting up Neutron's launch pads and test sites across the United States, joining the Neutron team is your opportunity to help launch a new large rocket for the very first time. QUALITY INSPECTOR III – NDT (X-RAY) As a Quality Inspector III – NDT (x-ray) based at Rocket Lab's site in Long Beach, CA, you will support critical inspection activities that ensure the integrity and reliability of components and assemblies across our advanced manufacturing programs. In this role, you will lead and perform X‑Ray NDT inspections, develop testing procedures, and uphold compliance with rigorous industry standards. To excel, you must be detail‑driven, technically adept, and committed to maintaining the highest levels of quality in a fast‑paced, mission‑focused environment. Join a driven team of pioneers relentlessly tackling challenging projects, delivering on the impossible, and making an impact on the future of space! WHAT YOU'LL GET TO DO: • Perform advanced X-Ray inspections on components and assemblies to detect defects, discontinuities, and ensure compliance with specifications, • Develop and implement NDT inspection techniques for complex geometries and materials, • Interpret and evaluate X-Ray results to determine the acceptability of materials and components, • Provide technical guidance and training to NDT Level I and II technicians., • Support research and development efforts for system qualification and certification of critical processes, • Ensure adherence to NDT standards such as AS, AMS, AWS, NAS, ASME, and ASTM., • Collaborate with engineering and manufacturing teams to improve NDT processes and eliminate non-conforming products, • Maintain accurate documentation of inspection results and ensure compliance with quality management systems, • Stay updated on advancements in NDT technology and techniques to continuously improve inspection capabilities YOU'LL BRING THESE QUALIFICATIONS: • 5+ years of experience in mechanical assembly, mechanical fitting, or NDT testing, • Certified in American Welding Society (AWS) or Certified Welding Inspector (CWI), • Certification as NDT Level III in X-Ray (per ASNT, NAS 410, or equivalent standards), • Experience in aviation, aerospace, or a similar industry performing NDT inspections, • Extensive experience inspecting advanced materials such as high-strength aluminum alloys, precipitation-hardened steels, Inconel, Monel, titanium, and Maraging steel (super alloys), • Strong knowledge of NDT standards and codes, including AS, AMS, AWS, NAS, ASME, and ASTM, • High school diploma or GED THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Proven experience in improving NDT processes for efficiency, productivity, and quality assurance, • Familiarity with advanced inspection techniques for complex geometries and challenging materials ADDITIONAL REQUIREMENTS: • Ability to work one of the following shifts:, • 3:00PM - 1:30AM Monday – Thursday, • Must be able to stand for long periods, climb ladders, bend, grasp, sit, pull, push, stoop, and stretch as required, • Comfortable working in tight spaces and maneuvering in confined areas, • Ability to lift up to 25 lbs. unassisted, • Must be able to walk or stand for extended periods (minimum 8 hours) Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$25—$32 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.